ALBERT

Description: Remote Sensing, Vol. 10, Pages 1171: Multi-Criteria Evaluation of Snowpack Simulations in Complex Alpine Terrain Using Satellite and In Situ Observations Remote Sensing doi: 10.3390/rs10081171 Authors: Jesús Revuelto Grégoire Lecourt Matthieu Lafaysse Isabella Zin Luc Charrois Vincent Vionnet Marie Dumont Antoine Rabatel Delphine Six Thomas Condom Samuel Morin Alessandra Viani Pascal Sirguey This work presents an extensive evaluation of the Crocus snowpack model over a rugged and highly glacierized mountain catchment (Arve valley, Western Alps, France) from 1989 to 2015. The simulations were compared and evaluated using in-situ point snow depth measurements, in-situ seasonal and annual glacier surface mass balance, snow covered area evolution based on optical satellite imagery at 250 m resolution (MODIS sensor), and the annual equilibrium-line altitude of glaciers, derived from satellite images (Landsat, SPOT, and ASTER). The snowpack simulations were obtained using the Crocus snowpack model driven by the same, originally semi-distributed, meteorological forcing (SAFRAN) reanalysis using the native semi-distributed configuration, but also a fully distributed configuration. The semi-distributed approach addresses land surface simulations for discrete topographic classes characterized by elevation range, aspect, and slope. The distributed approach operates on a 250-m grid, enabling inclusion of terrain shadowing effects, based on the same original meteorological dataset. Despite the fact that the two simulations use the same snowpack model, being potentially subjected to same potential deviation from the parametrization of certain physical processes, the results showed that both approaches accurately reproduced the snowpack distribution over the study period. Slightly (although statistically significantly) better results were obtained by using the distributed approach. The evaluation of the snow cover area with MODIS sensor has shown, on average, a reduction of the Root Mean Squared Error (RMSE) from 15.2% with the semi-distributed approach to 12.6% with the distributed one. Similarly, surface glacier mass balance RMSE decreased from 1.475 m of water equivalent (W.E.) for the semi-distributed simulation to 1.375 m W.E. for the distribution. The improvement, observed with a much higher computational time, does not justify the recommendation of this approach for all applications; however, for simulations that require a precise representation of snowpack distribution, the distributed approach is suggested.

Description: Remote Sensing, Vol. 10, Pages 1169: Multi-Year Analyses of Columnar Aerosol Optical and Microphysical Properties in Xi’an, a Megacity in Northwestern China Remote Sensing doi: 10.3390/rs10081169 Authors: Xiaoli Su Junji Cao Zhengqiang Li Kaitao Li Hua Xu Suixin Liu Xuehua Fan A thorough understanding of aerosol optical properties and their spatio-temporal variability are required to accurately evaluate aerosol effects in the climate system. In this study, a multi-year study of aerosol optical and microphysical properties was firstly performed in Xi’an based on three years of sun photometer remote sensing measurements from 2012 to 2015. The multi-year average of aerosol optical depth (AOD) at 440 nm was about 0.88 ± 0.24 (mean ± SD), while the averaged Ångström Exponent (AE) between 440 and 870 nm was 1.02 ± 0.15. The mean value of single scattering albedo (SSA) was around 0.89 ± 0.03. Aerosol optical depth and AE showed different seasonal variation patterns. Aerosol optical depth was slightly higher in winter (0.99 ± 0.36) than in other seasons (~0.85 ± 0.20), while AE showed its minimum in spring (0.85 ± 0.05) due to the impact of dust episodes. The seasonal variations of volume particle size distribution, spectral refractive index, SSA, and asymmetry factor were also analyzed to characterize aerosols over this region. Based on the aerosol products derived from sun photometer measurements, the classification of aerosol types was also conducted using two different methods in this region. Results show that the dominant aerosol types are absorbers in all seasons, especially in winter, demonstrating the strong absorptivity of aerosols in Xi’an.

Description: Sustainability, Vol. 10, Pages 2593: Visual Analysis of the Height Ratio between Building and Background Vegetation. Two Rural Cases of Study: Spain and Sweden Sustainability doi: 10.3390/su10082593 Authors: Jacinto Garrido-Velarde María Jesús Montero-Parejo Julio Hernández-Blanco Lorenzo García-Moruno The perception of apparent sizes of buildings in a rural environment depends on the height ratio between the building and its surrounding vegetation, and it is this parameter which is currently used to assess the built landscapes. The impact of a contrasting height is less strong if the building does not exceed the horizon line. For buildings overshooting the skyline, the building’s level of sharpness and number of lines in contrast to the sky determines the impact of the scales, and vegetation in the background helps to reduce impact. The specific objectives of the present study were: (1) finding height–ratio thresholds between building and background vegetation, which may improve the integration of rural buildings in sky-sensitive locations, and; (2) comparing the results in two rural contexts with very different climatic conditions: Spain and Sweden. A survey of eighteen scenarios (nine Spanish and nine Swedish), all digitally modified with different relative height ratios between vegetation and buildings, was performed. The survey was evaluated by the public from both countries. Regardless of the country of origin, integration of the building was good or very good when the vegetation in background did not exceed one half of the height of the construction. These results may be translated to technical criteria for planning assessment.

Description: Sustainability, Vol. 10, Pages 2586: Conserving Tropical Forests: Can Sustainable Livelihoods Outperform Artisanal or Informal Mining? Sustainability doi: 10.3390/su10082586 Authors: Joshua Fisher Poonam Arora Sophia Rhee The viability of conservation efforts, including protected areas and buffer zones, depends on finding ways to make those strategies more attractive and viable for local populations. This paper presents a pilot study utilizing a rapid rural appraisal of livelihoods in the buffer zone of Tambopata National Reserve in Madre de Dios, Peru, threatened by illegal gold mining and logging. We evaluated three predominant economic activities—artisanal gold mining, Brazil nut harvesting, and fish farming—in terms of potential economic returns. The main research question we ask is whether the latter two potentially sustainable land uses can match or exceed the returns from mining. Contrary to popular belief, we find that enhancing value creation at product origin could make existing forest-friendly livelihoods as or more lucrative than extractive ones. This has implications on local conservation policy encouraging implementable strategies incentivizing sustainable livelihoods in tandem with, and in support of, conservation goals.

Description: Remote Sensing, Vol. 10, Pages 1166: Inventory of Glaciers in the Shaksgam Valley of the Chinese Karakoram Mountains, 1970–2014 Remote Sensing doi: 10.3390/rs10081166 Authors: Haireti Alifu Yukiko Hirabayashi Brian Alan Johnson Jean-Francois Vuillaume Akihiko Kondoh Minoru Urai The Shaksgam Valley, located on the north side of the Karakoram Mountains of western China, is situated in the transition zone between the Indian monsoon system and dry arid climate zones. Previous studies have reported abnormal behaviors of the glaciers in this region compared to the global trend of glacier retreat, so the region is of special interest for glacier-climatological studies. For this purpose, long-term monitoring of glaciers in this region is necessary to obtain a better understanding of the relationships between glacier changes and local climate variations. However, accurate historical and up-to-date glacier inventory data for the region are currently unavailable. For this reason, this study conducted glacier inventories for the years 1970, 1980, 1990, 2000 and 2014 (i.e., a ~10-year interval) using multi-temporal remote sensing imagery. The remote sensing data used included Corona KH-4A/B (1965–1971), Hexagon KH-9 (1980), Landsat Thematic Mapper (TM) (1990/1993), Landsat Enhanced Thematic Mapper Plus (ETM+) (2000/2001), and Landsat Operational Land Imager (OLI) and Thermal Infrared Sensor (TIRS) (2014/2015) multispectral satellite images, as well as digital elevation models (DEMs) from the Shuttle Radar Topography Mission (SRTM), DEMs generated from Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) images (2005–2014), and Advanced Land Observing Satellite (ALOS) World 3D 30 m mesh (AW3D30). In the year 2014, a total of 173 glaciers (including 121 debris-free glaciers) (>0.5 km2), covering an area of 1478 ± 34 km2 (area of debris-free glaciers: 295 ± 7 km2) were mapped. The multi-temporal glacier inventory results indicated that total glacier area change between 1970–2014 was not significant. However, individual glacier changes showed significant variability. Comparisons of the changes in glacier terminus position indicated that 55 (32 debris-covered) glaciers experienced significant advances (~40–1400 m) between 1970–2014, and 74 (32 debris-covered) glaciers experienced significant advances (~40–1400 m) during the most recent period (2000–2014). Notably, small glaciers showed higher sensitivity to climate changes, and the glaciers located in the western part of the study site were exhibiting glacier area expansion compared to other parts of the Shaksgam Valley. Finally, regression analyses indicated that topographic parameters were not the main driver of glacier changes. On the contrary, local climate variability could explain the complex behavior of glaciers in this region.

Description: Sustainability, Vol. 10, Pages 2601: Researcher–Planner Dialogue on Environmental Justice and Its Knowledges—A Means to Encourage Social Learning Towards Sustainability Sustainability doi: 10.3390/su10082601 Authors: Aino Rekola Riikka Paloniemi Societies aiming for a sustainable future need more effective and legitimate planning and decision making practices, in which various actors together find pathways towards a sustainable transition. In this paper, we approach sustainability and environmental justice as epistemological (and ontological) challenges for land-use planning, and empirically analyse how action research could support planners’ social learning and planning towards fair and sustainable development. We analysed qualitatively the evolution of the researcher–planner dialogue while co-designing and developing better methods, means and practices to improve environmental justice in regional scale planning in Kymenlaakso Region, South-East Finland. We found that researcher-planner dialogue developed during cooperation. While in the beginning, social learning related to approaching environmental justice as a fair distribution of power evolved incrementally, later, when dialogue became more focused, communicative and reflective as an outcome of mutual frames and trust, learning occurred in a more transformative way. Such transformative learning concerned recognising youth as a silent group in the planning process and the means to involve their perceptions in planning. In order to support sustainability transformation in the future, we conclude that it is essential to create opportunities for such incremental and transformative social learning through innovative modes of interaction in various contexts.

Description: Sustainability, Vol. 10, Pages 2602: Towards a Joint Local Energy Transition Process in Urban Districts: The GO2Zero Simulation Game Sustainability doi: 10.3390/su10082602 Authors: Geertje Bekebrede Ellen van Bueren Ivo Wenzler The depletion of fossil fuel sources for our energy system and the influence on overall CO2 emissions drive the need to more sustainable energy systems. The transition towards a renewable energy system cannot be seen as a purely technical issue; it is strongly embedded within society. In this study, we analyze the stakeholder complexities of the transition in urban districts and research the use of a simulation game to increase the understanding of the complexity of the transition. Surveys and observations were used to collect data about the learning experiences of playing the game GO2Zero. The results show that participants liked to play the game and they considered the game a valid representation of the system. Further, the participants agree that they obtained a better understanding of the complexity of the residential energy system and experienced a variety of challenges in the transition. Simulation games, like GO2Zero, could become valuable instruments in local energy transition processes as they offer a safe environment for novices and experts to jointly experiment with the challenges in this process. These experiences could support the design of the transition process by helping actors to formulate goals and collaborative strategies for achieving those goals. Future research will focus on the use of this game for experimenting with different strategies and instruments and to analyze their effects.

Description: Sustainability, Vol. 10, Pages 2613: An E-Commerce Platform for Industrialized Construction Procurement Based on BIM and Linked Data Sustainability doi: 10.3390/su10082613 Authors: Dandan He Zhongfu Li Chunlin Wu Xin Ning Industrialized construction has raised the requirements of procurement methods used in the construction industry. The rapid development of e-commerce offers efficient and effective solutions, however the large number of participants in the construction industry means that the data involved are complex, and problems arise related to volume, heterogeneity, and fragmentation. Thus, the sector lags behind others in the adoption of e-commerce. In particular, data integration has become a barrier preventing further development. Traditional e-commerce platform, which considered data integration for common product data, cannot meet the requirements of construction product data integration. This study aimed to build an information-integrated e-commerce platform for industrialized construction procurement (ICP) to overcome some of the shortcomings existing platforms. We proposed a platform based on Building Information Modelling (BIM) and linked data, taking an innovative approach to data integration. It uses industrialized construction technology to support product standardization, BIM to support procurement process, and linked data to connect different data sources. The platform was validated using a case study. With the development of an e-commerce ontology, industrialized construction component information was extracted from BIM models and converted to Resource Description Framework (RDF) format. Related information from different data sources was also converted to RDF format, and Simple Protocol and Resource Description Framework Query Language (SPARQL) queries were implemented. The platform provides a solution for the development of e-commerce platform in the construction industry.

Description: Sustainability, Vol. 10, Pages 2614: An Efficient Grid-Based K-Prototypes Algorithm for Sustainable Decision-Making on Spatial Objects Sustainability doi: 10.3390/su10082614 Authors: Hong-Jun Jang Byoungwook Kim Jongwan Kim Soon-Young Jung Data mining plays a critical role in sustainable decision-making. Although the k-prototypes algorithm is one of the best-known algorithms for clustering both numeric and categorical data, clustering a large number of spatial objects with mixed numeric and categorical attributes is still inefficient due to complexity. In this paper, we propose an efficient grid-based k-prototypes algorithm, GK-prototypes, which achieves high performance for clustering spatial objects. The first proposed algorithm utilizes both maximum and minimum distance between cluster centers and a cell, which can reduce unnecessary distance calculation. The second proposed algorithm as an extension of the first proposed algorithm, utilizes spatial dependence; spatial data tends to be similar to objects that are close. Each cell has a bitmap index which stores the categorical values of all objects within the same cell for each attribute. This bitmap index can improve performance if the categorical data is skewed. Experimental results show that the proposed algorithms can achieve better performance than the existing pruning techniques of the k-prototypes algorithm.

Description: Sustainability, Vol. 10, Pages 2609: The Influence of the Backfilling Roadway Driving Sequence on the Rockburst Risk of a Coal Pillar Based on an Energy Density Criterion Sustainability doi: 10.3390/su10082609 Authors: Yi Xue Zhengzheng Cao Feng Du Lin Zhu The rockburst hazard has always been an important issue affecting the safety production of coal mines in China. The unreasonable sequencing of roadway driving can lead to the dynamic instability of coal pillars, which subsequently causes rockburst accidents in roadway backfilling mining engineering and poses a serious threat to the safety of the mines. Roadway backfilling mining technology is an effective approach with which to mine corner residual coal resources under buildings, railways, and rivers. An energy density criterion is established and programmed with FISH language using numerical analysis software for the rockburst risk evaluation of coal pillars. On this basis, a numerical simulation model is established based on four scheme types, namely, the sequential mining, one-roadway interval mining, two-roadway interval mining, and three-roadway interval mining schemes. The influence of the backfilling roadway driving sequence on coal pillar stability is investigated, and the change law of vertical stress and energy density factor of coal pillars in different driving sequences in roadway backfilling mining technology are analyzed. According to the research results, the maximum energy density factor value of 21,172 J/m4 for coal pillars in one-roadway interval mining is the lowest among the different schemes. Therefore, the one-roadway interval mining scheme is the optimal choice in roadway backfilling mining technology. The results can be treated as an important basis for the prevention and treatment of coal pillar instability and rockburst in roadway backfilling mining technology.

Description: Sustainability, Vol. 10, Pages 2604: Analysis of Guidelines and Identification of Characteristics Influencing the Deconstruction Potential of Buildings Sustainability doi: 10.3390/su10082604 Authors: Roberta Carvalho Machado Henor Artur de Souza Gustavo de Souza Veríssimo Growing concerns regarding environmental preservation and the fact that the construction industry is one of the sectors with the highest rates of resource consumption and waste generation, have encouraged the adoption of deconstruction as an alternative to the demolition of buildings at the end of their lifecycle. However, the choice of strategies to enable deconstruction requires an in-depth knowledge of how the building’s characteristics, combined with the procedures adopted in the deconstruction process, will affect the reutilization of materials and components. In this paper, characteristics relating to design for deconstruction (DfD) are identified and the influence of each characteristic on the viability of a deconstruction is analysed. A literature review is conducted to assess the guideline of DfD and to identify relevant characteristics. These characteristics are then divided into the following categories: direct influence enabling deconstruction; influence on the ease of the process; and, influence on prolonging a building’s lifecycle. A number of questions are suggested for analysing each characteristic, and these can be employed in the development of a methodology for evaluating a building’s deconstruction potential. The identification of characteristics involved in the deconstruction guidelines may assist in the optimization of projects and the planning of deconstruction processes.

Description: Sustainability, Vol. 10, Pages 2605: Building a More Sustainable Society? A Case Study on the Role of Sustainable Development in the Education and Early Career of Water and Environmental Engineers Sustainability doi: 10.3390/su10082605 Authors: Anu Vehmaa Meeri Karvinen Marko Keskinen Engineering education is critical for sustainability, given the key role that engineers have in shaping the development of our society. Yet, engineering studies have traditionally not been driven by sustainability-related knowledge and skills, but focused more on general computational skills and technical problem-solving. This has also been the case in our case study, which focuses on recent water and environmental engineering graduates in Finland. We studied the role that sustainable development has had in their education and early career through an extensive questionnaire and semi-structured interviews. The analysis was done in two ways: indirectly by comparing how well the key working life knowledge and skills recognized by the respondents correspond with sustainability-related skills, and directly by studying the graduates’ views towards the sustainable development and their possibilities to advance it in their work. The results show that although sustainability was not at the core of respondents’ studies, their key competencies correspond well with sustainability-related working life skills. The respondents also see that sustainable development has a central role in water and environmental engineering, although it is typically more visible at a strategic rather than a practical level. However, the results also indicate that several early-career engineers have deficient knowledge of sustainable development, and are therefore lacking the ability to fully connect the principles of sustainable development into their own expertise. Overall, the findings suggest that water and environmental engineers with their wide set of competencies have the potential to take on a larger role in building a more sustainable society. To ensure this, engineering education should emphasize the connection between the field and sustainable development and clearly link engineers’ core competencies with the skills required to promote sustainability.

Description: Sustainability, Vol. 10, Pages 2603: Historic Urban Landscapes: A Review on Trends and Methodologies in the Urban Context of the 21st Century Sustainability doi: 10.3390/su10082603 Authors: Arturo Azpeitia Santander Agustín Azkarate Garai-Olaun Ander de la Fuente Arana This article makes a critical reflection, questioning the notion of historical urban landscapes as a conceptual paradigm used for the basis of urban conservation in the twenty-first century. The study begins with a brief summary of the origins and subsequent evolution of this concept, highlighting the two key reference milestones: the Vienna Memorandum (UNESCO, 2005) and the Paris Recommendation (UNESCO, 2011). Subsequently, the focus of attention will be on highlighting the problems and difficulties posed by the management and protection of historic urban landscapes today. In this sense, the focus of attention will be placed on the assumption that change is an inherent part of the urban condition, since there is no consensus on what the limits of acceptable change in historic urban landscapes should be. It also emphasizes three factors that make this more difficult: (1) the reminiscences of the doctrines of the Weberian administration in the current models of government; (2) the subjective nature of the systems of indicators applied to the scope of historic cities; and (3) the opportunism of tactical urbanism, which, despite its shortcomings, is becoming an outstanding alternative for the methodological development of the historic urban landscapes.

Description: Minerals, Vol. 8, Pages 315: Biomineral Reactivity: The Kinetics of the Replacement Reaction of Biological Aragonite to Apatite Minerals doi: 10.3390/min8080315 Authors: Martina Greiner Lurdes Férnandez-Díaz Erika Griesshaber Moritz N. Zenkert Xiaofei Yin Andreas Ziegler Sabino Veintemillas-Verdaguer Wolfgang W. Schmahl We present results of bioaragonite to apatite conversion in bivalve, coral and cuttlebone skeletons, biological hard materials distinguished by specific microstructures, skeletal densities, original porosities and biopolymer contents. The most profound conversion occurs in the cuttlebone of the cephalopod Sepia officinalis, the least effect is observed for the nacreous shell portion of the bivalve Hyriopsis cumingii. The shell of the bivalve Arctica islandica consists of cross-lamellar aragonite, is dense at its innermost and porous at the seaward pointing shell layers. Increased porosity facilitates infiltration of the reaction fluid and renders large surface areas for the dissolution of aragonite and conversion to apatite. Skeletal microstructures of the coral Porites sp. and prismatic H. cumingii allow considerable conversion to apatite. Even though the surface area in Porites sp. is significantly larger in comparison to that of prismatic H. cumingii, the coral skeleton consists of clusters of dense, acicular aragonite. Conversion in the latter is sluggish at first as most apatite precipitates only onto its surface area. However, the process is accelerated when, in addition, fluids enter the hard tissue at centers of calcification. The prismatic shell portion of H. cumingii is readily transformed to apatite as we find here an increased porosity between prisms as well as within the membranes encasing the prisms. In conclusion, we observe distinct differences in bioaragonite to apatite conversion rates and kinetics depending on the feasibility of the reaction fluid to access aragonite crystallites. The latter is dependent on the content of biopolymers within the hard tissue, their feasibility to be decomposed, the extent of newly formed mineral surface area and the specific biogenic ultra- and microstructures.

Description: Minerals, Vol. 8, Pages 318: Mapping Surface Quartz Content in Sand Dunes Covered by Biological Soil Crusts Using Airborne Hyperspectral Images in the Longwave Infrared Region Minerals doi: 10.3390/min8080318 Authors: Shahar Weksler Offer Rozenstein Eyal Ben-Dor Biological soil crusts (BSCs), composed of cyanobacteria, algae, mosses, lichens, and fungi, are important ecosystem engineers that stabilize the quartz-rich dunes in the Nitzana study area near the Israel–Egypt border. The longwave infrared (LWIR) region of the electromagnetic spectrum is very useful for quartz identification since quartz reflectance in the visible, near infrared, and shortwave infrared (VIS-NIR-SWIR, 0.4–2.5 µm) spectral regions lacks identifying features, whereas in the LWIR region, the quartz emissivity spectrum presents a strong doublet feature. This emissivity feature can be used as a diagnostic tool for BSCs development in desert environments, because BSCs attenuate the quartz feature as a function of their successional development. A pair of day and night airborne hyperspectral images were acquired using the Specim AisaOWL LWIR sensor (7.7–12 µm) and processed using an innovative algorithm to reduce the atmospheric interference in this spectral domain. The resulting day and night apparent emissivity products were used to produce a surface quartz content map of the study area. The significant reduction in atmospheric interference resulted in a high correlation (R2 = 0.88) between quartz content in field samples determined by X-ray powder diffraction analysis and emissivity estimations from the airborne images. This, in turn, served as the ground truth to our quartz content map of the surface, and by proxy to the BSC.

Description: Minerals, Vol. 8, Pages 313: Reverse Flotation Separation of Fluorite from Calcite: A Novel Reagent Scheme Minerals doi: 10.3390/min8080313 Authors: Jianjun Wang Zihan Zhou Yuesheng Gao Wei Sun Yuehua Hu Zhiyong Gao Fluorite (CaF2), as an important strategic mineral source, is usually separated from calcite by the common froth flotation method, but this separation is still not selective enough. The development of a selective collector and/or depressant is the key to achieving high selective separation. 1-Hydroxyethylidene-1,1-diphosphonic acid (HEDP or H4L) is widely used as an environmentally friendly water treatment reagent due to its low cost and excellent anti-scaling performance in an aqueous solution. In this study, a novel reagent scheme was developed using HEDP as a fluorite depressant and sodium oleate (NaOL) as a calcite collector for the first time. When 3 × 10−5 mol/L of HEDP and 6 × 10−5 mol/L of NaOL were used at pH 6, the optimal selective separation for single minerals and mixed binary minerals was obtained. Zeta potential measurements indicated that HEDP possessed a stronger adsorption on fluorite than calcite, while NaOL did the opposite. This novel reagent scheme is of low cost, uses a small dosage, and is friendly to the environment, which makes it a promising reagent scheme for fluorite flotation in industrial application.

Description: Remote Sensing, Vol. 10, Pages 1181: Improved Albedo Estimates Implemented in the METRIC Model for Modeling Energy Balance Fluxes and Evapotranspiration over Agricultural and Natural Areas in the Brazilian Cerrado Remote Sensing doi: 10.3390/rs10081181 Authors: Bruno Silva Oliveira Elisabete Caria Moraes Marcos Carrasco-Benavides Gabriel Bertani Guilherme Augusto Verola Mataveli In this study we assessed METRIC (Mapping Evapotranspiration at high Resolution with Internalized Calibration) model performance to estimate energy balance fluxes and evapotranspiration (ET) in two heterogeneous landscapes in the Brazilian Cerrado, including fluxes and ET in both agricultural and natural vegetation. The estimates were evaluated by comparing them to flux tower data collected over sugarcane (USR site), woody savanna (PDG site) and stricto-sensu savanna (RECOR site) areas. The selection of the study years (2005–2007 for USR/PDG sites and 2011–2015 for RECOR site) was based on the availability of meteorological data (to be used as inputs in METRIC) and of flux tower data for energy balance fluxes and ET comparisons. The broadband albedo submodel was adjusted in order to improve Net Radiation estimates. For this adjustment, we applied at-surface solar radiation simulations obtained from the SMARTS2 model under different conditions of land elevation, precipitable water content and solar angles. We also tested the equivalence between the measured crop coefficient (Kc_ec) and the reference evapotranspiration fraction (ETrF or F), seeking to extrapolate from instantaneous to daily values of actual evapotranspiration (ETa). Surface albedo was underestimated by 10% at the USR site (showing a better performance for full crop coverage), by 15% at the PDG site (following the woody savanna dynamics pattern through dry and wet seasons) and was overestimated by 21% at the RECOR site. METRIC was effective in simulating the spatial and temporal variability of energy balance fluxes and ET over agricultural and natural vegetation in the Brazilian Cerrado, with errors within those reported in the literature. Net radiation (Rn) presented consistent results (coefficient of determination (R2) > 0.94) but it was overestimated by 8% and 9% in sugarcane and woody savanna, respectively. METRIC-derived ET estimates showed an agreement with ground data at USR and PDG sites (R2 > 0.88, root mean square error (RMSE) up to 0.87 mm day−1), but at the RECOR site, ET was overestimated by 14% (R2 = 0.96, mean absolute error (MAE) = 0.62 mm.day−1 and RMSE = 0.75 mm day−1). Surface energy balance fluxes and ET were marked by seasonality, with direct dependence on available energy, rainfall distribution, soil moisture and other parameters like albedo and NDVI.

Description: Remote Sensing, Vol. 10, Pages 1182: Detection of Frozen Soil Using Sentinel-1 SAR Data Remote Sensing doi: 10.3390/rs10081182 Authors: Nicolas Baghdadi Hassan Bazzi Mohammad El Hajj Mehrez Zribi The objective of this paper is to evaluate the potential of Sentinel-1 Synthetic Aperture Radar “SAR” data (C-band) for monitoring agricultural frozen soils. First, investigations were conducted from simulated radar signal data using a SAR backscattering model combined with a dielectric mixing model. Then, Sentinel-1 images acquired at a study site near Paris, France were analyzed using temperature data to investigate the potential of the new Sentinel-1 SAR sensor for frozen soil mapping. The results show that the SAR backscattering coefficient decreases when the soil temperature drops below 0 °C. This decrease in signal is the most important for temperatures that ranges between 0 and −5 °C. A difference of at least 2 dB is observed between unfrozen soils and frozen soils. This difference increases under freezing condition when the temperature at the image acquisition date decreases. In addition, results show that the potential of the C-band radar signal for the discrimination of frozen soils slightly decreases when the soil moisture decreases (simulated data were used with soil moisture contents of 20 and 30 vol%). The difference between the backscattering coefficient of unfrozen soil and the backscattering coefficient of frozen soil decreases by approximately 1 dB when the soil moisture decreases from 30 to 20 vol%). Finally, the results show that both VV and VH allow a good detection of frozen soils but the sensitivity of VH is higher by approximately 1.5 dB. In conclusion, this study shows that the difference between a reference image acquired without freezing and an image acquired under freezing conditions is a good tool for detecting frozen soils.

Description: Sustainability, Vol. 10, Pages 2633: Scenario-Based Simulation of Tianjin City Using a Cellular Automata–Markov Model Sustainability doi: 10.3390/su10082633 Authors: Ruci Wang Hao Hou Yuji Murayama Rapid urbanization is occurring throughout China, especially in megacities. Using a land use model to obtain future land use/cover conditions is an essential method to prevent chaotic urban sprawl and imbalanced development. This study utilized historical Landsat images to create land use/cover maps to predict the land use/cover changes of Tianjin city in 2025 and 2035. The cellular automata–Markov (CA–Markov) model was applied in the simulation under three scenarios: the environmental protection scenario (EPS), crop protection scenario (CPS), and spontaneous scenario (SS). The model achieved a kappa value of 86.6% with a figure of merit (FoM) of 12.18% when compared to the empirical land use/cover map in 2015. The results showed that the occupation of built-up areas increased from 29.13% in 2015 to 38.68% (EPS), 36.18% (CPS), and 47.94% (SS) in 2035. In this context, current urbanization would bring unprecedented stress on agricultural resources and forest ecosystems, which could be attenuated by implementing protection policies along with decelerating urban expansion. The findings provide valuable information for urban planners to achieve sustainable development goals.

Description: Sustainability, Vol. 10, Pages 2629: Pathways to Coastal Resiliency: The Adaptive Gradients Framework Sustainability doi: 10.3390/su10082629 Authors: Elisabeth M. Hamin Yaser Abunnasr Max Roman Dilthey Pamela K. Judge Melissa A. Kenney Paul Kirshen Thomas C. Sheahan Don J. DeGroot Robert L. Ryan Brain G. McAdoo Leonard Nurse Jane A. Buxton Ariana E. Sutton-Grier Elizabeth A. Albright Marielos Arlen Marin Rebecca Fricke Current and future climate-related coastal impacts such as catastrophic and repetitive flooding, hurricane intensity, and sea level rise necessitate a new approach to developing and managing coastal infrastructure. Traditional “hard” or “grey” engineering solutions are proving both expensive and inflexible in the face of a rapidly changing coastal environment. Hybrid solutions that incorporate natural, nature-based, structural, and non-structural features may better achieve a broad set of goals such as ecological enhancement, long-term adaptation, and social benefits, but broad consideration and uptake of these approaches has been slow. One barrier to the widespread implementation of hybrid solutions is the lack of a relatively quick but holistic evaluation framework that places these broader environmental and societal goals on equal footing with the more traditional goal of exposure reduction. To respond to this need, the Adaptive Gradients Framework was developed and pilot-tested as a qualitative, flexible, and collaborative process guide for organizations to understand, evaluate, and potentially select more diverse kinds of infrastructural responses. These responses would ideally include natural, nature-based, and regulatory/cultural approaches, as well as hybrid designs combining multiple approaches. It enables rapid expert review of project designs based on eight metrics called “gradients”, which include exposure reduction, cost efficiency, institutional capacity, ecological enhancement, adaptation over time, greenhouse gas reduction, participatory process, and social benefits. The framework was conceptualized and developed in three phases: relevant factors and barriers were collected from practitioners and experts by survey; these factors were ranked by importance and used to develop the initial framework; several case studies were iteratively evaluated using this technique; and the framework was finalized for implementation. The article presents the framework and a pilot test of its application, along with resources that would enable wider application of the framework by practitioners and theorists.

Description: Sustainability, Vol. 10, Pages 2627: Photovoltaic Power Forecasting Based on EEMD and a Variable-Weight Combination Forecasting Model Sustainability doi: 10.3390/su10082627 Authors: Hui Wang Jianbo Sun Weijun Wang It is widely considered that solar energy will be one of the most competitive energy sources in the future, and solar energy currently accounts for high percentages of power generation in developed countries. However, its power generation capacity is significantly affected by several factors; therefore, accurate prediction of solar power generation is necessary. This paper proposes a photovoltaic (PV) power generation forecasting method based on ensemble empirical mode decomposition (EEMD) and variable-weight combination forecasting. First, EEMD is applied to decompose PV power data into components that are then combined into three groups: low-frequency, intermediate-frequency, and high-frequency. These three groups of sequences are individually predicted by the variable-weight combination forecasting model and added to obtain the final forecasting result. In addition, the design of the weights for combination forecasting was studied during the forecasting process. The comparison in the case study indicates that in PV power generation forecasting, the prediction results obtained by the individual forecasting and summing of the sequences after the EEMD are better than those from direct prediction. In addition, when the single prediction model is converted to a variable-weight combination forecasting model, the prediction accuracy is further improved by using the optimal weights.

Description: Sustainability, Vol. 10, Pages 2622: A Rough Multi-Criteria Decision-Making Approach for Sustainable Supplier Selection under Vague Environment Sustainability doi: 10.3390/su10082622 Authors: Huiyun Lu Shaojun Jiang Wenyan Song Xinguo Ming With the growing awareness of environmental and social issues, sustainable supply chain management (SSCM) has received considerable attention both in academia and industry. Supplier selection plays an important role in the successful implementation of sustainable supply chain management, because it can influence the performance of SSCM. Sustainable supplier selection is a typical multi-criteria decision-making problem involving subjectivity and vagueness. Although some previous researches of supplier selection use fuzzy approaches to deal with vague information, it has been criticized for requiring much priori information and inflexibility in manipulating vagueness. Moreover, the previous methods often omit the environmental and social evaluation criteria in the supplier selection. To manipulate these problems, a new approach based on the rough set theory and ELECTRE (ELimination Et Choix Traduisant la REalité) is developed in this paper. The novel approach integrates the strength of rough set theory in handling vagueness without much priori information and the merit of ELECTRE in modeling multi-criteria decision-making problem. Finally, a case study of sustainable supplier selection for solar air-conditioner manufacturer is provided to demonstrate the application and potential of the approach.

Description: Sustainability, Vol. 10, Pages 2624: Economic Transition and Changing Location of Manufacturing Industry in China: A Study of the Yangtze River Delta Sustainability doi: 10.3390/su10082624 Authors: Jiawei Wu Yehua Dennis Wei Qizhai Li Feng Yuan Industrial restructuring is widely considered an important force in regional economic growth and sustainable development. With increased globalization and economic transition, a dramatic industrial restructuring has been taking place in China. Applying geographically weighted shift-share model (GW-SSM) and geographically and temporally weighted regression model (GTWR), we analyze (re)location dynamics and determinants of the manufacturing industry in the Yangtze River Delta (YRD) from 1999 to 2013, with particular attention to the implications of economic transition and institutional restructuring. We find that high-tech and capital-intensive manufacturing industries agglomerated in coastal cities, while labor-intensive and resource-based sectors have become spatially more dispersed to peripheral areas. We also find that the development of service and high-tech industries, rising labor costs, and more strict environmental regulations have facilitated the geographic dispersion of labor- and pollution-intensive industries. Moreover, regions with advantages in intermediate goods, preferential policies, and urbanization economies are attractive to capital- and technology-intensive manufacturing industries. Our research suggests that development policies should be tailored to specific regions to promote local production and innovative networks and make manufacturing industries more competitive.

Description: Sustainability, Vol. 10, Pages 2621: Adoption of Conservation Tillage on the Semi-Arid Loess Plateau of Northwest China Sustainability doi: 10.3390/su10082621 Authors: Qingfeng Han Kadambot H. M. Siddique Fengmin Li Conservation tillage is an important approach to prevent water loss and soil erosion and promote soil fertility that has been adopted widely throughout the world. However, despite promotion of the benefits of conservation tillage, obstacles are still encountered in some regions. A survey of 385 farmer households in the semi-arid Loess Plateau of China was conducted to assess the adoption of conservation tillage (ACT). This investigation was located in two counties that have run conservation tillage demonstrations with wheat for at least eight years. A binary logistic regression model was used to quantify the factors determining whether or not farmers adopt conservation tillage. Farmer’s education level, the influence of training, and field demonstrations by agricultural departments had significant positive effects on ACT. Although the adoption rate of conservation tillage in this paper was very high (89%), farmers were reluctant to continue practicing conservation tillage based on their experiences, which is contrary to the expectations of the government. The area available for planting winter wheat and the number of arable plots per household also had significant positive effects on ACT. However, the total cultivated area of land per household had a significant negative impact on ACT. Farmer awareness of conservation tillage technology, the distance from a farmer’s house to the nearest agricultural market, and the size of the active labor force in the family had significant negative impacts on ACT. These results will help in the development of more effective and targeted policies to improve the sustainability of farming systems on the semi-arid Loess Plateau.

Description: Sustainability, Vol. 10, Pages 2620: Transition towards Energy Efficiency: Developing the Nigerian Building Energy Efficiency Code Sustainability doi: 10.3390/su10082620 Authors: Susanne Geissler Doris Österreicher Ene Macharm In Nigeria, there is an estimated deficit of 17 million housing units. Power supply is insufficient, and the electricity supply for about 60 million Nigerians relies on private generators, causing noise, pollution, and high expenditures for mainly imported fuel. Altogether, current challenges clearly demonstrate the need for effective energy efficiency policies targeting also the building sector. The Nigerian Energy Support Program began in 2013, among others, with the objective being to support the Nigerian Government in developing the Nigerian Building Energy Efficiency Code. This paper presents two preparatory activities carried out in order to come up with suggestions for a legal framework well suited for the situation on the ground: the Case Study Building Analysis carried out in collaboration with a Nigerian developer and the Nigerian Building Energy Efficiency Guideline, elaborated together with stakeholders. The results of preparatory activities pointed out that the code must put emphasis on climate adaptive design and must define requirements and procedures in a clear and simple way to allow for effective enforcement. Only then can energy-efficient mass housing be feasible in Nigeria. The paper concludes with a description of the Nigerian Building Energy Efficiency Code (BEEC), officially approved and launched by the Federal Minister of Power, Works and Housing on 29 August 2017.

Description: Sustainability, Vol. 10, Pages 2619: Are the World-Leading Primary Silver Mines Exhausting? Sustainability doi: 10.3390/su10082619 Authors: Marcello Ruberti Stefania Massari Silver is one of the rarest metals in nature and certainly among the most used ones, not only as precious good for financial investments but also for many industrial critical applications. Because it would be very difficult to analyze the situation regarding the future global availability of silver as a commodity in general, due to the necessity of a large amount of data which are hardly available, we have focused only on the mining production of primary silver. In particular, the study regards the activities of a sample consisting of twelve of the world top fifteen leading primary silver mines, which represent the 54% of the worldwide primary silver production and 16% of the global silver mining production. We have investigated the related exploitation state and trends of these twelve sites by elaborating their last ten-years statistics on silver production, ore grades, resources and reserves. The findings of this study, in short, are that the cumulative average silver ore grades, both in extracted mineral, resources and reserves, of the above selected mines, have decreased and also that the new mining fields (Dukat, San Bartolomé, Pirquitas, Saucito) have lower silver content indexes than the older ones.

Description: Sustainability, Vol. 10, Pages 2617: Exploring Twitter for CSR Disclosure: Influence of CEO and Firm Characteristics in Latin American Companies Sustainability doi: 10.3390/su10082617 Authors: Yuli Marcela Suárez-Rico Mauricio Gómez-Villegas María Antonia García-Benau Social networks, which are characterised by accessibility and interactivity, offer great potential for dialogue between companies and stakeholders, for example as platforms for publishing information on aspects of corporate social responsibility (CSR). In this paper, we use a synthetic index to analyse levels of CSR disclosure via Twitter, and identify explanatory variables of this disclosure by studying the demographic characteristics of the Chief Executive Officer (CEO) and of the company. This synthetic index was based on data for 93 companies located in the four countries of the Pacific Alliance (Chile, Colombia, Mexico, and Peru), using categories based on the 2016 Global Reporting Initave (GRI) Standards. The tweets were compiled during a period of two months in 2017, immediately before and after the publication of each CSR report. The synthetic index was taken as the dependent variable and used as the basis for multivariate regression analysis to identify the relationship between the level of CSR disclosure on Twitter and the characteristics of the firm and its CEO. The results obtained show that firms operating in environmentally-sensitive industries present higher levels of CSR disclosure on Twitter than those in other sectors. By country of origin, the Colombian and Chilean companies offered higher levels of disclosure than those in Mexico and Peru. The regression analysis revealed a positive relationship between the firm operating in a sensitive industry and its level of CSR disclosure on Twitter, and an inverse relationship between the latter variable and the tenure of the CEO.

Description: Minerals, Vol. 8, Pages 323: (10.4) Face of Ordered and Disordered Dolomite, MgCa(CO3)2: A Computational Study to Reveal the Growth Mechanism Minerals doi: 10.3390/min8080323 Authors: Marco Bruno Erica Bittarello In this study, the stability of the (10.4) face of dolomite was systematically investigated. The surface energies at 0 K of the different (10.4) surfaces resulting from the cut of both ordered and disordered bulk structures were determined and compared, to establish how different atomic configurations (surface terminations) can affect the stability of the investigated face. To study the thermodynamic behavior of a surface, a 2D periodic slab model and the ab initio CRYSTAL code were adopted. The surface energies of the (10.4) faces of calcite and magnesite were also calculated in order to compare them with those of the different terminations of the (10.4) face of dolomite. Our calculations showed that the bulk of the dolomite crystal must have an ordered structure to reach the minimum of the energy, whereas the (10.4) surface is more stable when its structure is disordered. A growth model of the (10.4) face has been proposed: the peculiarity of this model consists in the existence of some disordered layers forming at the interface crystal/solution, which arrange in an ordered structure once covered by others disordered layers resulting by the spiral steps propagation.

Description: Minerals, Vol. 8, Pages 322: Particle Size Distribution Effects on the Strength Characteristic of Cemented Paste Backfill Minerals doi: 10.3390/min8080322 Authors: Jiangyu Wu Meimei Feng Zhanqing Chen Xianbiao Mao Guansheng Han Yiming Wang It is of great significance, for economic, environmental and security reasons, to investigate the strength characteristic of underground cemented paste backfill (CPB). Consequently, an ultrasonic test, uniaxial and triaxial compression experiment, and acoustic emission (AE) monitoring were carried out on CPB, for which the particles satisfied Talbot gradation. The homogeneity of CPB specimens was evaluated by ultrasonic pulse velocity (UPV). The stress–strain behavior and AE characteristic of CPB specimens under different Talbot indices and confining pressures were investigated. The effects of the particle size distribution and the confining pressure on the peak strength of CPB were analyzed. The strength parameter model of CPB under the coupled influence of the particle size distribution and the confining pressure was constructed based on the Mohr–Coulomb strength criterion. The results show that the peak strength of CPB is positively linear with confining pressure, however, the relationship between its strength parameters and the Talbot index can be characterized by a quadratic polynomial function. This suggests that there is an optimal gradation of particles reflected in the maximum strength of CPB.

Description: Minerals, Vol. 8, Pages 319: Fault Zone Evolution and Development of a Structural and Hydrological Barrier: The Quartz Breccia in the Kiggavik Area (Nunavut, Canada) and Its Control on Uranium Mineralization Minerals doi: 10.3390/min8080319 Authors: Alexis Grare Olivier Lacombe Julien Mercadier Antonio Benedicto Marie Guilcher Anna Trave Patrick Ledru John Robbins In the Kiggavik area (Nunavut, Canada), major fault zones along, or close to, where uranium deposits are found are often associated with occurrence of thick quartz breccia (QB) bodies. These bodies formed in an early stage (~1750 Ma) of the long-lasting tectonic history of the Archean basement, and of the Proterozoic Thelon basin. The main characteristics of the QB are addressed in this study; through field work, macro and microscopic observations, cathodoluminescence microscopy, trace elements, and oxygen isotopic signatures of the quartz forming the QB. Faults formed earlier during syn- to post-orogenic rifting (1850–1750 Ma) were subsequently reactivated, and underwent cycles of cataclasis, pervasive silicification, hydraulic brecciation, and quartz recrystallization. This was synchronous with the circulation of meteoric fluids mixing with Si-rich magmatic-derived fluids at depth, and were coeval with the emplacement of the Kivalliq igneous suite at 1750 Ma. These processes led to the emplacement of up to 30 m thick QB, which behaved as a mechanically strong, transverse hydraulic barrier that localized later fracturing, and compartmentalized/channelized vertical flow of uranium-bearing fluids after the deposition of the Thelon Basin (post 1750 Ma). The development and locations of QB control the location of uranium mineralization in the Kiggavik area.

Description: IJGI, Vol. 7, Pages 300: A Comparative Study of Three Non-Geostatistical Methods for Optimising Digital Elevation Model Interpolation ISPRS International Journal of Geo-Information doi: 10.3390/ijgi7080300 Authors: Serajis Salekin Jack H. Burgess Justin Morgenroth Euan G. Mason Dean F. Meason It is common to generate digital elevation models (DEMs) from aerial laser scanning (ALS) data. However, cost and lack of knowledge may preclude its use. In contrast, global navigation satellite systems (GNSS) are seldom used to collect and generate DEMs. These receivers have the potential to be considered as data sources for DEM interpolation, as they can be inexpensive, easy to use, and mobile. The data interpolation method and spatial resolution from this method needs to be optimised to create accurate DEMs. Moreover, the density of GNSS data is likely to affect DEM accuracy. This study investigates three different deterministic approaches, in combination with spatial resolution and data thinning, to determine their combined effects on DEM accuracy. Digital elevation models were interpolated, with resolutions ranging from 0.5 m to 10 m using natural neighbour (NaN), topo to raster (ANUDEM), and inverse distance weighted (IDW) methods. The GNSS data were thinned by 25% (0.389 points m−2), 50% (0.259 points m−2), and 75% (0.129 points m−2) and resulting DEMs were contrast against a DEM interpolated from unthinned data (0.519 points m−2). Digital elevation model accuracy was measured by root mean square error (RMSE) and mean absolute error (MAE). It was found that the highest resolution, 0.5 m, produced the lowest errors in resulting DEMs (RMSE = 0.428 m, MAE = 0.274 m). The ANUDEM method yielded the greatest DEM accuracy from a quantitative perspective (RMSE = 0.305 m and MAE = 0.197 m); however, NaN produced a more visually appealing surface. In all the assessments, IDW showed the lowest accuracy. Thinning the input data by 25% and even 50% had relatively little impact on DEM quality; however, accuracy decreased markedly at 75% thinning (0.129 points m−2). This study showed that, in a time where ALS is commonly used to generate DEMs, GNSS-surveyed data can be used to create accurate DEMs. This study confirmed the need for optimization to choose the appropriate interpolation method and spatial resolution in order to produce a reliable DEM.

Description: Remote Sensing, Vol. 10, Pages 1186: Application of Multi-Sensor Satellite Data for Exploration of Zn–Pb Sulfide Mineralization in the Franklinian Basin, North Greenland Remote Sensing doi: 10.3390/rs10081186 Authors: Amin Beiranvand Pour Tae-Yoon S. Park Yongcheol Park Jong Kuk Hong Basem Zoheir Biswajeet Pradhan Iman Ayoobi Mazlan Hashim Geological mapping and mineral exploration programs in the High Arctic have been naturally hindered by its remoteness and hostile climate conditions. The Franklinian Basin in North Greenland has a unique potential for exploration of world-class zinc deposits. In this research, multi-sensor remote sensing satellite data (e.g., Landsat-8, Phased Array L-band Synthetic Aperture Radar (PALSAR) and Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER)) were used for exploring zinc in the trough sequences and shelf-platform carbonate of the Franklinian Basin. A series of robust image processing algorithms was implemented for detecting spatial distribution of pixels/sub-pixels related to key alteration mineral assemblages and structural features that may represent potential undiscovered Zn–Pb deposits. Fusion of Directed Principal Component Analysis (DPCA) and Independent Component Analysis (ICA) was applied to some selected Landsat-8 mineral indices for mapping gossan, clay-rich zones and dolomitization. Major lineaments, intersections, curvilinear structures and sedimentary formations were traced by the application of Feature-oriented Principal Components Selection (FPCS) to cross-polarized backscatter PALSAR ratio images. Mixture Tuned Matched Filtering (MTMF) algorithm was applied to ASTER VNIR/SWIR bands for sub-pixel detection and classification of hematite, goethite, jarosite, alunite, gypsum, chalcedony, kaolinite, muscovite, chlorite, epidote, calcite and dolomite in the prospective targets. Using the remote sensing data and approaches, several high potential zones characterized by distinct alteration mineral assemblages and structural fabrics were identified that could represent undiscovered Zn–Pb sulfide deposits in the study area. This research establishes a straightforward/cost-effective multi-sensor satellite-based remote sensing approach for reconnaissance stages of mineral exploration in hardly accessible parts of the High Arctic environments.

Description: Remote Sensing, Vol. 10, Pages 1184: An Evaluation of Forest Health Insect and Disease Survey Data and Satellite-Based Remote Sensing Forest Change Detection Methods: Case Studies in the United States Remote Sensing doi: 10.3390/rs10081184 Authors: Ian W. Housman Robert A. Chastain Mark V. Finco The Operational Remote Sensing (ORS) program leverages Landsat and MODIS data to detect forest disturbances across the conterminous United States (CONUS). The ORS program was initiated in 2014 as a collaboration between the US Department of Agriculture Forest Service Geospatial Technology and Applications Center (GTAC) and the Forest Health Assessment and Applied Sciences Team (FHAAST). The goal of the ORS program is to supplement the Insect and Disease Survey (IDS) and MODIS Real-Time Forest Disturbance (RTFD) programs with imagery-derived forest disturbance data that can be used to augment traditional IDS data. We developed three algorithms and produced ORS forest change products using both Landsat and MODIS data. These were assessed over Southern New England and the Rio Grande National Forest. Reference data were acquired using TimeSync to conduct an independent accuracy assessment of IDS, RTFD, and ORS products. Overall accuracy for all products ranged from 71.63% to 92.55% in the Southern New England study area and 63.48% to 79.13% in the Rio Grande National Forest study area. While the accuracies attained from the assessed products are somewhat low, these results are similar to comparable studies. Although many ORS products met or exceeded the overall accuracy of IDS and RTFD products, the differences were largely statistically insignificant at the 95% confidence interval. This demonstrates the current implementation of ORS is sufficient to provide data to augment IDS data.

Description: Sustainability, Vol. 10, Pages 2659: Research on the Influence of Real Estate Development on Private Investment: A Case Study of China Sustainability doi: 10.3390/su10082659 Authors: Jiangtao Li Jianyue Ji Huiwen Guo Lei Chen Private investment in China, as a developing country, is an important source of financing for Chinese SMEs (Small and Medium-Size Enterprises) and has played a major role in the development of the real economy. However, in 2016, the growth rate of private investment in China dropped from 10.18% to 3.17%, which had a significant impact on the real economy. At the same time, China’s real estate market has developed rapidly, attracting a large number of capital inflows. The relationship between real estate development and private investment in China is worth considering. This study first, theoretically analyzes the influence mechanism of real estate industry on private investment, pointing out that within a modest development range, the development of real estate industry can promote private investment through the industrial linkage, urbanization, and balance sheet effects, but when real estate is overdeveloped, it has an inhibitory effect on private investment through vampire effect, raising costs and reducing demand effect. In other words, real estate has different effects on private investment in different developmental periods. Therefore, there is a non-linear relationship between the two variables. Second, the relevant provincial panel data of 31 provinces in mainland China from 2003 to 2015 were selected. Using the dynamic panel system Generalized Method of Moments (GMM), this study estimated the correlation between real estate development and private investment. The empirical results showed that the development of the real estate industry has a significant impact on the level of private investment; the two showing an “inverted U-shaped” relationship. At present, in some provinces in China, the real estate industry has exceeded the inverted U-shaped threshold. To boost the vitality of private investment in promoting real economic growth, the development of the real estate industry should be restricted, and house prices should be properly regulated.

Description: Sustainability, Vol. 10, Pages 2657: Numerical Thermal Characterization and Performance Metrics of Building Envelopes Containing Phase Change Materials for Energy-Efficient Buildings Sustainability doi: 10.3390/su10082657 Authors: Mingli Li Guoqing Gui Zhibin Lin Long Jiang Hong Pan Xingyu Wang Residential and commercial buildings consume nearly 40 percent of total USA energy use and account for one-third of total greenhouse gas emissions. The challenges are how to effectively promote energy efficiency in buildings to respond to the high financial burden of energy consumption, while reducing pollution. Phase change materials (PCMs) have been used as passive energy storage for building systems. Along this vein, this study aims to numerically elucidate the design parameters of building envelopes strengthened by PCM layers, and unveil their impacts on building energy efficiency. Critical design variables, such as the thickness of the PCM layer, the latent heat of PCMs, or melting temperature of PCMs were selected for a parametric study, while performance metrics were used to assess building efficiency. Results revealed that PCM-enabled building walls exhibited different levels of improvement, in terms of reduction of peak temperature and temperature swings. Among the variables, the selection of the proper melting point for a PCM was identified as the most crucial parameter for determining building energy efficiency, while the heat of fusion was also observed as a critical property of PCM for building potential. Findings also demonstrated that the placement of the PCM near the interior wall surface could achieve higher efficiency, as compared to other cases. Results also showed that the thermal conductivity of PCM has a minimum contribution to energy storage capacity.

Description: Sustainability, Vol. 10, Pages 2655: Substructure Hybrid Simulation Boundary Technique Based on Beam/Column Inflection Points Sustainability doi: 10.3390/su10082655 Authors: Zaixian Chen Xueyuan Yan Hao Wang Xingji Zhu Billie F. Spencer Compatibility among substructures is an issue for hybrid simulation. Traditionally, the structure model is regarded as the idealized shear model. The equilibrium and compatibility of the axial and rotational direction at the substructure boundary are neglected. To improve the traditional boundary technique, this paper presents a novel substructure hybrid simulation boundary technique based on beam/column inflection points, which can effectively avoid the complex operation for realizing the bending moment at the boundary by using the features of the inflection point where the bending moment need not be simulated in the physical substructure. An axial displacement prediction technique and the equivalent force control method are used to realize the proposed method. The numerical simulation test scheme for the different boundary techniques was designed to consider three factors: (i) the different structural layers; (ii) the line stiffness ratio of the beam to column; and (iii) the peak acceleration. The simulation results for a variety of numerical tests show that the proposed technique shows better performance than the traditional technique, demonstrating its potential in improving HS test accuracy. Finally, the accuracy and feasibility of the proposed boundary technique is verified experimentally through the substructure hybrid simulation tests of a six-story steel frame model.

Description: Minerals, Vol. 8, Pages 326: Hydrotalcite and Hydrocalumite in Mortar Binders from the Medieval Castle of Portilla (Álava, North Spain): Accurate Mineralogical Control to Achieve More Reliable Chronological Ages Minerals doi: 10.3390/min8080326 Authors: Graciela Ponce-Antón Luis Angel Ortega Maria Cruz Zuluaga Ainhoa Alonso-Olazabal Jose Luis Solaun Mortars from different stratigraphic units at Portilla Castle (Alava, North Spain) have been analyzed for mineralogical characterization before radiocarbon dating. The mortar binder at Portilla Castle is composed not only of neoformation calcite but also of double-layered hydroxide (LDH) minerals such as hydrotalcite and hydrocalumite. The mineralogy of several fractions of the binder has been analyzed to determine the granulometric distribution of minerals in the binder. The continuous monitoring of mineralogy during the extraction of different grain size fractions has been performed by using a scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermogravimetric analyses (TGA). Hydrotalcite and hydrocalumite-bearing mortar binders give older ages than expected since they introduce dead carbon into the system.

Description: Sustainability, Vol. 10, Pages 2666: Understanding the Spontaneous Spreading of Stone Bunds in Ethiopia: Implications for Sustainable Land Management Sustainability doi: 10.3390/su10082666 Authors: Meskerem Abi Aad Kessler Peter Oosterveer Degefa Tolossa This study deals with the spontaneous spreading of stone bunds in the central Ethiopian highlands, i.e., the adoption and implementation of stone bunds by farmers on their own initiative. The study tests the hypothesis that spontaneously implemented stone bunds, as compared to stone bunds implemented by mass mobilization campaigns, are more integrated with other land management practices and lead to higher yields. Data are collected in the Girar Jarso woreda through field observations and household surveys. Descriptive statistics are used to analyze and test the data at 1% and 5% probability levels. Results show that stone bunds are spontaneously implemented mainly on farmlands located nearby the homesteads where farmers perceive severe erosion, poor soil fertility and steep slope gradients. Compared to stone bunds implemented by mass mobilization, spontaneously implemented stone bunds are perceived as better maintained, more frequently modified to fit the farming system and better integrated with soil fertility management practices, such as applying fertilizer, compost and manure. Particularly, this better integration with other practices is very important, because it makes stone bunds more effective in reducing erosion, leading to beneficial effects on soil moisture and soil productivity, as perceived by farmers. The study, therefore, suggests that the mass mobilization campaign should use a more participatory and integrated approach, in which there is ample space for awareness raising and learning concerning the benefits of integrated farm management, and in which farmers themselves have a leading role in the decision on where to construct stone bunds. Such a strategy will lead to more sustainable impact on soil fertility and food security than the current top-down intervention approach.

Description: Remote Sensing, Vol. 10, Pages 1196: Evaluating the Best Spectral Indices for the Detection of Burn Scars at Several Post-Fire Dates in a Mountainous Region of Northwest Yunnan, China Remote Sensing doi: 10.3390/rs10081196 Authors: Davide Fornacca Guopeng Ren Wen Xiao Remote mountainous regions are among the Earth’s last remaining wild spots, hosting rare ecosystems and rich biodiversity. Because of access difficulties and low population density, baseline information about natural and human-induced disturbances in these regions is often limited or nonexistent. Landsat time series offer invaluable opportunities to reconstruct past land cover changes. However, the applicability of this approach strongly depends on the availability of good quality, cloud-free images, acquired at a regular time interval, which in mountainous regions are often difficult to find. The present study analyzed burn scar detection capabilities of 11 widely used spectral indices (SI) at 1 to 5 years after fire events in four dominant vegetation groups in a mountainous region of northwest Yunnan, China. To evaluate their performances, we used M-statistic as a burned-unburned class separability index, and we adapted an existing metric to quantify the SI residual burn signal at post-fire dates compared to the maximum severity recorded soon after the fire. Our results show that Normalized Burn Ratio (NBR) and Normalized Difference Moisture Index (NDMI) are always among the three best performers for the detection of burn scars starting 1 year after fire but not for the immediate post-fire assessment, where the Mid Infrared Burn Index, Burn Area Index, and Tasseled Cap Greenness were superior. Brightness and Wetness peculiar patterns revealed long-term effects of fire in vegetated land, suggesting their potential integration to assist other SI in burned area detection several years after the fire event. However, in general, class separability of most of the SI was poor after one growing season, due to the seasonal rains and the relatively fast regrowth rate of shrubs and grasses, confirming the difficulty of assessment in mountainous ecosystems. Our findings are meaningful for the selection of a suitable SI to integrate in burned area detection workflows, according to vegetation type and time lag between image acquisitions.

Description: Remote Sensing, Vol. 10, Pages 1192: Automating Parameter Learning for Classifying Terrestrial LiDAR Point Cloud Using 2D Land Cover Maps Remote Sensing doi: 10.3390/rs10081192 Authors: Chen-Chieh Feng Zhou Guo The automating classification of point clouds capturing urban scenes is critical for supporting applications that demand three-dimensional (3D) models. Achieving this goal, however, is met with challenges because of the varying densities of the point clouds and the complexity of the 3D data. In order to increase the level of automation in the point cloud classification, this study proposes a segment-based parameter learning method that incorporates a two-dimensional (2D) land cover map, in which a strategy of fusing the 2D land cover map and the 3D points is first adopted to create labelled samples, and a formalized procedure is then implemented to automatically learn the following parameters of point cloud classification: the optimal scale of the neighborhood for segmentation, optimal feature set, and the training classifier. It comprises four main steps, namely: (1) point cloud segmentation; (2) sample selection; (3) optimal feature set selection; and (4) point cloud classification. Three datasets containing the point cloud data were used in this study to validate the efficiency of the proposed method. The first two datasets cover two areas of the National University of Singapore (NUS) campus while the third dataset is a widely used benchmark point cloud dataset of Oakland, Pennsylvania. The classification parameters were learned from the first dataset consisting of a terrestrial laser-scanning data and a 2D land cover map, and were subsequently used to classify both of the NUS datasets. The evaluation of the classification results showed overall accuracies of 94.07% and 91.13%, respectively, indicating that the transition of the knowledge learned from one dataset to another was satisfactory. The classification of the Oakland dataset achieved an overall accuracy of 97.08%, which further verified the transferability of the proposed approach. An experiment of the point-based classification was also conducted on the first dataset and the result was compared to that of the segment-based classification. The evaluation revealed that the overall accuracy of the segment-based classification is indeed higher than that of the point-based classification, demonstrating the advantage of the segment-based approaches.

Description: Remote Sensing, Vol. 10, Pages 1197: Quantifying Drought Propagation from Soil Moisture to Vegetation Dynamics Using a Newly Developed Ecohydrological Land Reanalysis Remote Sensing doi: 10.3390/rs10081197 Authors: Yohei Sawada Despite the importance of the interaction between soil moisture and vegetation dynamics to understand the complex nature of drought, few land reanalyses explicitly simulate vegetation growth and senescence. In this study, I provide a new land reanalysis which explicitly simulates the interaction between sub-surface soil moisture and vegetation dynamics by the sequential assimilation of satellite microwave brightness temperature observations into a land surface model (LSM). Assimilating satellite microwave brightness temperature observations improves the skill of a LSM to simultaneously simulate soil moisture and the seasonal cycle of leaf area index (LAI). By analyzing soil moisture and LAI simulated by this new land reanalysis, I identify the drought events which significantly damage LAI on the climatological day-of-year of the LAI’s seasonal peak and quantify drought propagation from soil moisture to LAI in the global snow-free region. On average, soil moisture in the shallow soil layers (0–0.45 m) quickly recovers from the drought condition before the climatological day-of-year of the LAI’s seasonal peak while soil moisture in the deeper soil layer (1.05–2.05 m) and LAI recover from the drought condition approximately 100 days after the climatological day-of-year of the LAI’s seasonal peak.

Description: Sustainability, Vol. 10, Pages 2674: Reputation Effects in Socially Driven Sharing Economy Transactions Sustainability doi: 10.3390/su10082674 Authors: Maarten ter Huurne Amber Ronteltap Chenhui Guo Rense Corten Vincent Buskens Reputation has often been proposed as the central mechanism that creates trust in the sharing economy. However, some sharing platforms that focus primarily on social rather than economically driven exchanges have managed to facilitate exchanges between users without the use of a reputation system. This could indicate that socially driven exchanges are in less need of reputation systems and that having sufficient trust is less problematic. We examine the effect of seller reputation on sales and price as proxies for trust, using a large dataset from a Dutch meal-sharing platform. This platform aims to stimulate social interactions between people via meal sharing. Multilevel regression analyses were used to test the association of reputation with trust. Our main empirical results are that reputation affects both sales and price positively, consistent with the existing reputation literature. We also found evidence of the presence of an information effect, i.e., the influence of reputation on sharing decreases when additional profile information is provided (e.g., a profile photo, a product description). Our results thus confirm the effectiveness of reputation in more socially driven exchanges also. Consequently, platform owners are advised to use reputation on their platform to increase sharing between its users.

Description: Sustainability, Vol. 10, Pages 2676: Measuring Social Vulnerability to Flood Disasters in China Sustainability doi: 10.3390/su10082676 Authors: Ming Zhang Wenbo Xiang Meilan Chen Zisen Mao To proactively prevent losses from flood disasters and subsequent potential human conflicts, it is critical to measure the social vulnerability of a country or a region to flood. In this article, we first propose a list of potential indicators for measuring this social vulnerability. These indicators’ significances are then tested based on their correlation coefficients with a vulnerability index obtained using nonparametric Data Envelopment Analysis. In the final measurement system, there are nine indicators: the proportion of the primary industry, infrastructure development level, income gap between urban and rural residents, the proportion of population over 60 years old, the proportion of children under 14 years old, the number of people receiving minimum income assistance, and the number of disasters per year. We then conduct principal component analysis to evaluate the social vulnerability level. Our results show that the social vulnerability level is mostly impacted by the economic principal component and the demographic and social security principal component. Moreover, our results also confirm that the social vulnerability level to flood in China declined overall from 2003 to 2015.

Description: Sustainability, Vol. 10, Pages 2673: The Public Willingness to Pay for Reducing the Incidence of Hazardous Chemical Spill Accidents by Half in South Korea Sustainability doi: 10.3390/su10082673 Authors: Hye-Jeong Lee Hyo-Jin Kim Seung-Hoon Yoo Hazardous chemical spill (HCS) accidents, which occur due to careless workers, transport accidents, etc., can be harmful to humans. Recently, an average of 96 cases of HCS accidents have taken place in South Korea annually. As a result, the government is trying to reduce the incidence of HCS accidents by 50%. Government officials are seeking information about the value that the enforcement of the reduction plan will bring for the public. This knowledge will help government officials decide whether to implement the reduction plan. This article seeks to acquire information about the public willingness to pay (WTP) for the reduction plan, employing the contingent valuation (CV) technique. For this purpose, a total of 1000 households living in South Korea participated in the CV survey in 2017. The data on the WTP were gathered using a dichotomous choice question and analyzed using the spike model. Forty-five percent of the respondents were willing to accept an increase in income taxes to carry out the reduction plan. The mean household WTP estimate was obtained as KRW 3830 (USD 3.41) per annum. The national value expanded from the sample to the population is worth KRW 74.8 billion (USD 66.6 million) per year. This value implies the public value of the reduction plan and can be applied in policy analysis and decision-making concerning the reduction of the incidence of HCS accidents.

Description: Sustainability, Vol. 10, Pages 2671: The Sustainable Characteristic of Bio-Bi-Phase Flow of Peristaltic Transport of MHD Jeffrey Fluid in the Human Body Sustainability doi: 10.3390/su10082671 Authors: Ahmed Zeeshan Nouman Ijaz Tehseen Abbas Rahmat Ellahi This study deals with the peristaltic transport of non-Newtonian Jeffrey fluid with uniformly distributed identical rigid particles in a rectangular duct. The effects of a magnetohydrodynamics bio-bi-phase flow are taken into account. The governing equations for mass and momentum are simplified using the fact that wavelength is much greater than the amplitude and small Reynolds number. A closed-form solution for velocity is obtained by means of the eigenfunction expansion method whereby pressure rise is numerically calculated. The results are graphically presented to observe the effects of different physical parameters and the suitability of the method. The results for hydrodynamic, Newtonian fluid, and single-phase problems can be respectively obtained by taking the Hartmann number (M = 0), relaxation time (λ1=0), and volume fraction (C = 0) as special cases of this problem.

Description: Sustainability, Vol. 10, Pages 2591: Reducing Seismic Vulnerability and Energy Demand of Cities through Green Infrastructure Sustainability doi: 10.3390/su10082591 Authors: Riccardo Privitera Daniele La Rosa Historically, urbanization processes in Italy resulted in built environments with high levels of seismic vulnerability, low energy efficiency and a lack of green spaces. The latter represent the main providers of ecosystem services in cities and play a relevant role in reducing the effects of climate change by the regulation of microclimate and urban heat islands that are responsible for building energy consumption. Despite their importance in providing ecosystem services, the implementation of green infrastructure challenges limited financial resources for the public acquisition of private plots. This paper proposes a strategy to implement an urban green infrastructure aimed at generating a double positive effect on cities by triggering seismic retrofitting and the reduction of cooling energy demand of the existing urban fabric. This is proposed through a transfer of development rights program where landowners gain economic incentives to adopt seismic retrofitting interventions and, at the same time, public administrations implement the green infrastructure in the portion of areas transferred to the municipality. The energy efficiency of buildings closer to the green infrastructure, therefore, benefits from the cooling effects of this new greenery. The strategy is tested under different scenarios of acquisition of private land by public administrations in the metropolitan area of Catania (Italy).

Description: Sustainability, Vol. 10, Pages 2588: Identifying Economic Growth Convergence Clubs and Their Influencing Factors in China Sustainability doi: 10.3390/su10082588 Authors: Feng Li Guangdong Li Weishan Qin Jing Qin Haitao Ma Balanced and coordinated economic development across regions is a critical goal of regional economic development and new-type urbanization in China. However, few studies have examined economic growth convergence clubs at the county level. To extend the research on convergence clubs, this research applies a log t convergence test and a dynamic spatial ordered probit model (DSOP) to endogenously identify economic growth convergence clubs in counties and to examine the influence of initial states and structures on club convergence probability. The study sample covers 2286 counties of China from 1992 to 2010. The results show significant convergence club patterns at the county levels, resulting in the gradual formation of six convergence clubs. The DSOP estimation results show that per capita fixed assets, population density, and industrialization have promoted convergence club formation to varying degrees.

Description: Sustainability, Vol. 10, Pages 2594: Resilient Entrepreneurship among European Higher Education Graduates Sustainability doi: 10.3390/su10082594 Authors: Ana-Maria Zamfir Cristina Mocanu Adriana Grigorescu Resilience represents the ability of systems and individuals to adapt and overcome the difficulties and challenges they face. Resilient entrepreneurs are those who cope with stressful or adverse situations by relying on both internal and external factors. This article examines the way higher education graduates express entrepreneurial resilience in various national contexts. We analyze the Research into Employment and professional Flexibility (REFLEX) data set that provides information on early career of higher education graduates leaving education in the academic year 1999/2000 in 13 European countries. We study resilience in entrepreneurship by considering both how long higher education graduates succeed to remain in self-employment and the extent to which they re-entry in entrepreneurship after exiting. Survival analyses, logistic and cox regressions indicate important differences in patterns of starting, remaining and returning in self-employment and in factors influencing the retention in entrepreneurship among higher education graduates. It is argued that structural factors, personal characteristics and educational background explain a large amount of variation in resilient entrepreneurship.

Description: Minerals, Vol. 8, Pages 312: Leaching of Primary Copper Sulfide Ore in Chloride-Ferrous Media Minerals doi: 10.3390/min8080312 Authors: Karina E. Salinas Osvaldo Herreros Cynthia M. Torres Copper extraction from primary copper sulfide ore from a typical porphyry copper deposit from Antofagasta, Chile, was investigated after leaching with a chloride-ferrous media at two temperatures. The study focused on whether this chemical leaching system could be applied at an industrial scale. Leaching tests were conducted in columns loaded with approximately 50 kg of agglomerated ore; the ore was first cured for 14 days and then leached for 90 days. The highest copper extraction, 50.23%, was achieved at 32.9 °C with the addition of 0.6 kg of H2SO4 per ton of ore, 0.525 kg of NaCl per ton of ore, and 0.5 kg of FeSO4 per ton of ore. In respect to copper extraction, the most effective variables were temperature and the addition of NaCl.

Description: Remote Sensing, Vol. 10, Pages 1202: Potential of Photochemical Reflectance Index for Indicating Photochemistry and Light Use Efficiency in Leaves of European Beech and Norway Spruce Trees Remote Sensing doi: 10.3390/rs10081202 Authors: Daniel Kováč Petra Veselovská Karel Klem Kristýna Večeřová Alexander Ač Josep Peñuelas Otmar Urban Hyperspectral reflectance is becoming more frequently used for measuring the functions and productivity of ecosystems. The purpose of this study was to re-evaluate the potential of the photochemical reflectance index (PRI) for evaluating physiological status of plants. This is needed because the reasons for variation in PRI and its relationships to physiological traits remain poorly understood. We examined the relationships between PRI and photosynthetic parameters in evergreen Norway spruce and deciduous European beech grown in controlled conditions during several consecutive periods of 10–12 days between which the irradiance and air temperature were changed stepwise. These regime changes induced significant changes in foliar biochemistry and physiology. The responses of PRI corresponded particularly to alterations in the actual quantum yield of photosystem II photochemistry (ΦPSII). Acclimation responses of both species led to loss of PRI sensitivity to light use efficiency (LUE). The procedure of measuring PRI at multiple irradiance-temperature conditions has been designed also for testing accuracy of ΔPRI in estimating LUE. A correction mechanism of subtracting daily measured PRI from early morning PRI has been performed to account for differences in photosynthetic pigments between irradiance-temperature regimes. Introducing ΔPRI, which provided a better estimate of non-photochemical quenching (NPQ) compared to PRI, also improved the accuracy of LUE estimation. Furthermore, ΔPRI was able to detect the effect of drought, which is poorly observable from PRI.

Description: Remote Sensing, Vol. 10, Pages 1200: Mapping up-to-Date Paddy Rice Extent at 10 M Resolution in China through the Integration of Optical and Synthetic Aperture Radar Images Remote Sensing doi: 10.3390/rs10081200 Authors: Xin Zhang Bingfang Wu Guillermo E. Ponce-Campos Miao Zhang Sheng Chang Fuyou Tian Rice is a staple food in East Asia and Southeast Asia—an area that accounts for more than half of the world’s population, and 11% of its cultivated land. Studies on rice monitoring can provide direct or indirect information on food security, and water source management. Remote sensing has proven to be the most effective method for the large-scale monitoring of croplands, by using temporary and spectral information. The Google Earth Engine (GEE) is a cloud-based platform providing access to high-performance computing resources for processing extremely large geospatial datasets. In this study, by leveraging the computational power of GEE and a large pool of satellite and other geophysical data (e.g., forest and water extent maps, with high accuracy at 30 m), we generated the first up-to-date rice extent map with crop intensity, at 10 m resolution in the three provinces with the highest rice production in China (the Heilongjiang, Hunan and Guangxi provinces). Optical and synthetic aperture radar (SAR) data were monthly and metric composited to ensure a sufficient amount of up-to-date data without cloud interference. To remove the common confounding noise in the pixel-based classification results at medium to high resolution, we integrated the pixel-based classification (using a random forest classifier) result with the object-based segmentation (using a simple linear iterative clustering (SLIC) method). This integration resulted in the rice planted area data that most closely resembled official statistics. The overall accuracy was approximately 90%, which was validated by ground crop field points. The F scores reached 87.78% in the Heilongjiang Province for monocropped rice, 89.97% and 80.00% in the Hunan Province for mono- and double-cropped rice, respectively, and 88.24% in the Guangxi Province for double-cropped rice.

Description: Sustainability, Vol. 10, Pages 2710: An Analysis of the Energy Consumption Behavior of Scaled, Containerized Web Apps Sustainability doi: 10.3390/su10082710 Authors: Sandro Kreten Achim Guldner Stefan Naumann Containerization is one of the most important topics for modern data centers and web developers. Since the number of containers on one- and multi-node systems is growing, knowledge about the energy consumption behavior of single web-service containers is essential in order to save energy and, of course, money. In this article, we are going to show how the energy consumption behavior of single containerized web services/web apps changes while creating replicas of the service in order to scale and balance the web service.

Description: Sustainability, Vol. 10, Pages 2699: A Framework for Regional Ecological Risk Warning Based on Ecosystem Service Approach: A Case Study in Ganzi, China Sustainability doi: 10.3390/su10082699 Authors: Tian Dong Weihua Xu Hua Zheng Yang Xiao Lingqiao Kong Zhiyun Ouyang Worldwide, most ecosystem services have declined. However, the theoretical and analytical frameworks for the ecological risk assessment of ecosystem services are still lacking. Here a framework for the risk assessment of ecosystem services was developed based on the formation, changes, risk, and management of ecosystem services. The framework was tested in Ganzi, the upstream area of the Yangtze River Basin, for the regional ecological warning of ecosystem services. Ecosystem services in the form of soil retention and sandstorm prevention and ecological risks including soil and wind erosion were modelled. The results showed that with the increase in area and quality of natural vegetation (forest and grassland), the soil retention service and sandstorm prevention service increased by 66.92% and 8.59% between 2000 and 2015, respectively. Correspondingly, the ecological risk of soil erosion decreased by 8.8%, and wind erosion remained stable. Despite the negative impacts from agricultural development on sandstorm prevention, the increase in vegetation and improvement in ecological quality led to a decrease in the ecological risks of soil erosion and sandstorm erosion by improvement of ecosystem services. This research provides a new perspective for ecological risk assessment, as well as direct management information on ecological risks, by incorporating ecosystem services.

Description: IJGI, Vol. 7, Pages 311: Processing BIM and GIS Models in Practice: Experiences and Recommendations from a GeoBIM Project in The Netherlands ISPRS International Journal of Geo-Information doi: 10.3390/ijgi7080311 Authors: Ken Arroyo Ohori Abdoulaye Diakité Thomas Krijnen Hugo Ledoux Jantien Stoter It is widely acknowledged that the integration of BIM and GIS data is a crucial step forward for future 3D city modelling, but most of the research conducted so far has covered only the high-level and semantic aspects of GIS-BIM integration. This paper presents the results of the GeoBIM project, which tackled three integration problems focussing instead on aspects involving geometry processing: (i) the automated processing of complex architectural IFC models; (ii) the integration of existing GIS subsoil data in BIM; and (iii) the georeferencing of BIM models for their use in GIS software. All the problems have been studied using real world models and existing datasets made and used by practitioners in The Netherlands. For each problem, this paper exposes in detail the issues faced, proposed solutions, and recommendations for a more successful integration.

Description: Minerals, Vol. 8, Pages 332: Kurchatovite and Clinokurchatovite, Ideally CaMgB2O5: An Example of Modular Polymorphism Minerals doi: 10.3390/min8080332 Authors: Yulia A. Pankova Sergey V. Krivovichev Igor V. Pekov Edward S. Grew Vasiliy O. Yapaskurt Kurchatovite and clinokurchatovite, both of ideal composition CaMgB2O5, from the type localities (Solongo, Buryatia, Russia, and Sayak-IV, Kazakhstan, respectively) have been studied using electron microprobe and single-crystal X-ray diffraction methods. The empirical formulae of the samples are Ca1.01Mg0.87Mn0.11Fe2+0.02B1.99O5 and Ca0.94Mg0.91Fe2+0.10Mn0.04B2.01O5 for kurchatovite and clinokurchatovite, respectively. The crystal structures of the two minerals are similar and based upon two-dimensional blocks arranged parallel to the c axis in kurchatovite and parallel to the a axis in clinokurchatovite. The blocks are built up from diborate B2O5 groups, and Ca2+ and Mg2+ cations in seven- and six-fold coordination, respectively. Detailed analysis of geometrical parameters of the adjacent blocks reveals that symmetrically different diborate groups have different degrees of conformation in terms of the δ angles between the planes of two BO3 triangles sharing a common O atom, featuring two discrete sets of the δ values of ca. 55° (B’ blocks) and 34° (B” blocks). The stacking of the blocks in clinokurchatovite can be presented as …(+B’)(+B”)(+B’)(+B”)… or [(+B’)(+B”)], whereas in kurchatovite it is more complex and corresponds to the sequence …(+B’)(+B”)(+B’)(−B’)(−B”)(−B’)(+B’)(+B”)(+B’)(−B’)(−B”)(−B’)… or [(+B’)(+B”)(+B’)(−B’)(−B”)(−B’)]. The B’:B” ratios for clinokurchatovite and kurchatovite are 1:1 and 2:1, respectively. According to this description, the two minerals cannot be considered as polytypes and their mutual relationship corresponds to the term modular polymorphs. From the viewpoint of information-based measures of structural complexity, clinokurchatovite (IG = 4.170 bits/atom and IG,total = 300.235 bits/cell) is structurally simpler than kurchatovite (IG = 4.755 bits/atom and IG,total = 1027.056 bits/cell). The high structural complexity of kurchatovite can be inferred from the modular character of its structure. The analysis of structural combinatorics in terms of the modular approach allows to construct the whole family of theoretically possible “kurchatovite”-type structures that bear the same structural features common for kurchatovite and clinokurchatovite. However, the crystal structures of the latter minerals are the simplest and are the only ones that have been observed in nature. The absence of other possible structures is remarkable and can be explained by either the maximum-entropy of the least-action fundamental principles.

Description: Minerals, Vol. 8, Pages 331: Textural Characteristics of Noncrystalline Silica in Sinters and Quartz Veins: Implications for the Formation of Bonanza Veins in Low-Sulfidation Epithermal Deposits Minerals doi: 10.3390/min8080331 Authors: Tadsuda Taksavasu Thomas Monecke T. James Reynolds Silica sinters forming at the Wairakei geothermal power plant in New Zealand are composed of noncrystalline opal-A that deposited rapidly from cooling geothermal liquids flashed to atmosphere. The sinter is laminated with alternating layers of variably compacted silicified filamentous microbes encased by chains of fused silica microspheres. Microscopic inspection of bonanza quartz vein samples from the Buckskin National low-sulfidation epithermal precious metal deposit in Nevada showed that colloform bands in these veins exhibit relic microsphere textures similar to those observed in the silica sinters from the Wairakei power plant. The textural similarity suggests that the colloform bands were originally composed of noncrystalline opal-A that subsequently recrystallized to quartz. The colloform bands contain dendrites of electrum and naumannite that must have grown in a yielding matrix of silica microspheres deposited at the same time as the ore minerals, implying that the noncrystalline silica exhibited a gel-like behavior. Quartz bands having other textural characteristics in the crustiform veins lack ore minerals. This suggests that ore deposition and the formation of the colloform bands originally composed of compacted microspheres of noncrystalline silica are genetically linked and that ore deposition within the bonanza veins was only episodic. Supersaturation of silica and precious metals leading to the formation of the colloform bands may have occurred in response to transient flashing of the hydrothermal liquids. Flashing of geothermal liquids may thus represent a key mechanism in the formation of bonanza precious metal grades in low-sulfidation epithermal deposits.

Description: Remote Sensing, Vol. 10, Pages 1211: Evaluating Metal Effects on the Reflectance Spectra of Plant Leaves during Different Seasons in Post-Mining Areas, China Remote Sensing doi: 10.3390/rs10081211 Authors: Chao Zhou Shengbo Chen Yuanzhi Zhang Jianhua Zhao Derui Song Dawei Liu This study examined the relationship between the leaf reflectance of different seasons and the concentration of heavy metal elements in leaves, such as Co, Cu, Mo, and Ni in a post-mining area. The reflectance spectra and leaf samples of three typical plants were measured and collected in a whole growth cycle (June, July, August, and September). The Red Edge Position (REP), Readjustment Normalized Difference Vegetation Index (RE-NDVI), and Photochemical Reflectance Index (PRI) were extracted and used to explore its relation with the heavy metals concentrations in leaves between different seasons. The results show that all three Vegetation Indices (VIs) were insensitive indicators for monitoring the metal effects of vegetation in different seasons, which showed similar trends. Based on this, the Continuum Removal Indices (CRIs) were proposed from the continuum removed approach and extended for detecting the effects of heavy metal pollution over a full growth cycle. The relationship between the metal concentrations and CRIs of different plants was respectively analyzed by Stepwise Multiple Linear Regression (SMLR) and Partial Least Squares Regression (PLSR). It is found that a significant correlation exists between the band depth and the concentration of Cu and Ni based on the White birch data sets using the PLSR, resulting in a small deviation from the established relationships. Compared with VIs, the approach of coupling CRIs and multiple regressions was effective for improving the estimation accuracy. The presented study provides a detection model of leaf heavy metals that can be adapted to different growing cycles, even an arbitrary growing cycle.

Description: Sustainability, Vol. 10, Pages 2732: Sustainable Mineral Resource Management—Insights into the Case of Phosphorus Sustainability doi: 10.3390/su10082732 Authors: Gerald Steiner Bernhard Geissler Although it is among the most abundant elements in Earth’s crust (11th [1]) and water (13th [2]), phosphorus (P) is commonly referred to as “life’s bottleneck”, as “life can multiply until all thephosphorus is gone, and then there is an inexorable halt which nothing can prevent . . . ” [3]. [...]

Description: Sustainability, Vol. 10, Pages 2730: Regime-Switching Determinants for Spreads of Emerging Markets Sovereign Credit Default Swaps Sustainability doi: 10.3390/su10082730 Authors: Ma Deng Ho Tsai Using the Markov regime switching approach, we investigate the dependency of short term sovereign credit default swap (SCDS) spread changes on a nation’s country-specific fundamental factors, local, regional and macroeconomic global factors. We find that the significance of the determinants of SCDS spread changes differ across the two states of our regime-switching model. Specifically, in the good state, the weekly SCDS spread changes are mainly determined by local, regional and fundamental factors; whereas global variables have a stronger influence in the bad regime. In particular, US market returns play a dominant role in influencing the SCDS spread change in the bad state suggesting loss aversion and flight–to–quality behavior of investors. We then examine the cross-sectional differences of the above regime switching effect based on country-specific characters and find that the regime switching effect is associated with a nation’s country-specific characters such as openness, economic size and so forth.

Description: Sustainability, Vol. 10, Pages 2729: Assessment of Postural Load during Melon Cultivation in Mediterranean Greenhouses Sustainability doi: 10.3390/su10082729 Authors: Marta Gómez-Galán José Pérez-Alonso Ángel-Jesús Callejón-Ferre Julián Sánchez-Hermosilla-López Health and safety at work directly influence the development of sustainable agriculture. In the agricultural sector, many farm workers suffer musculoskeletal disorders caused by forced posture. The objective of this research is to assess working postures during melon cultivation in Almería-type greenhouses. The Ovako Working Posture Assessment System (OWAS) has been used with pictures of the tasks. The variables studied by multiple correspondence analysis were as follows: Subtask, Posture code, Back, Arms, Legs, Load, Risk, and Risk combination. The OWAS analysis showed that 47.57% of the postures were assessed as risk category 2, 14.32% as risk category 3, 0.47% as risk category 4, and the rest as risk category 1. Corrective measures should be implemented immediately, as soon as possible, or in the near future, depending on the risks detected.

Description: Remote Sensing, Vol. 10, Pages 1234: HOMPC: A Local Feature Descriptor Based on the Combination of Magnitude and Phase Congruency Information for Multi-Sensor Remote Sensing Images Remote Sensing doi: 10.3390/rs10081234 Authors: Zhitao Fu Qianqing Qin Bin Luo Hong Sun Chun Wu Local region description of multi-sensor images remains a challenging task in remote sensing image analysis and applications due to the non-linear radiation variations between images. This paper presents a novel descriptor based on the combination of the magnitude and phase congruency information of local regions to capture the common features of images with non-linear radiation changes. We first propose oriented phase congruency maps (PCMs) and oriented magnitude binary maps (MBMs) using the multi-oriented phase congruency and magnitude information of log-Gabor filters. The two feature vectors are then quickly constructed based on the convolved PCMs and MBMs. Finally, a dense descriptor named the histograms of oriented magnitude and phase congruency (HOMPC) is developed by combining the histograms of oriented phase congruency (HPC) and the histograms of oriented magnitude (HOM) to capture the structure and shape properties of local regions. HOMPC was evaluated with three datasets composed of multi-sensor remote sensing images obtained from unmanned ground vehicle, unmanned aerial vehicle, and satellite platforms. The descriptor performance was evaluated by recall, precision, F1-measure, and area under the precision-recall curve. The experimental results showed the advantages of the HOM and HPC combination and confirmed that HOMPC is far superior to the current state-of-the-art local feature descriptors.

Description: Remote Sensing, Vol. 10, Pages 1236: Progressive Degradation of an Ice Rumple in the Thwaites Ice Shelf, Antarctica, as Observed from High-Resolution Digital Elevation Models Remote Sensing doi: 10.3390/rs10081236 Authors: Seung Hee Kim Duk-jin Kim Hyun-Cheol Kim Ice rumples are locally-grounded features of flowing ice shelves, elevated tens of meters above the surrounding surface. These features may significantly impact the dynamics of ice-shelf grounding lines, which are strongly related to shelf stability. In this study, we used TanDEM-X data to construct high-resolution DEMs of the Thwaites ice shelf in West Antarctica from 2011 to 2013. We also generated surface deformation maps which allowed us to detect and monitor the elevation changes of an ice rumple that appeared sometime between the observations of a grounding line of the Thwaites glacier using Double-Differential Interferometric SAR (DDInSAR) in 1996 and 2011. The observed degradation of the ice rumple during 2011–2013 may be related to a loss of contact with the underlying bathymetry caused by the thinning of the ice shelf. We subsequently used a viscoelastic deformation model with a finite spherical pressure source to reproduce the surface expression of the ice rumple. Global optimization allowed us to fit the model to the observed deformation map, producing reasonable estimates of the ice thickness at the center of the pressure source. Our conclusion is that combining the use of multiple high-resolution DEMs and the simple viscoelastic deformation model is feasible for observing and understanding the transient nature of small ice rumples, with implications for monitoring ice shelf stability.

Description: Remote Sensing, Vol. 10, Pages 1232: Assessing Coastal SMAP Surface Salinity Accuracy and Its Application to Monitoring Gulf of Maine Circulation Dynamics Remote Sensing doi: 10.3390/rs10081232 Authors: Semyon A. Grodsky Douglas Vandemark Hui Feng Monitoring the cold and productive waters of the Gulf of Maine and their interactions with the nearby northwestern (NW) Atlantic shelf is important but challenging. Although remotely sensed sea surface temperature (SST), ocean color, and sea level have become routine, much of the water exchange physics is reflected in salinity fields. The recent invention of satellite salinity sensors, including the Soil Moisture Active Passive (SMAP) radiometer, opens new prospects in regional shelf studies. However, local sea surface salinity (SSS) retrieval is challenging due to both cold SST limiting salinity sensor sensitivity and proximity to land. For the NW Atlantic, our analysis shows that SMAP SSS is subject to an SST-dependent bias that is negative and amplifies in winter and early spring due to the SST-related drop in SMAP sensor sensitivity. On top of that, SMAP SSS is subject to a land contamination bias. The latter bias becomes noticeable and negative when the antenna land contamination factor (LC) exceeds 0.2%, and attains maximum negative values at LC = 0.4%. Coastward of LC = 0.5%, a significant positive land contamination bias in absolute SMAP SSS is evident. SST and land contamination bias components are seasonally dependent due to seasonal changes in SST/winds and terrestrial microwave properties. Fortunately, it is shown that SSS anomalies computed relative to a satellite SSS climatology can effectively remove such seasonal biases along with the real seasonal cycle. SMAP monthly SSS anomalies have sufficient accuracy and applicability to extend nearer to the coasts. They are used to examine the Gulf of Maine water inflow, which displayed important water intrusions in between Georges Banks and Nova Scotia in the winters of 2016/17 and 2017/18. Water intrusion patterns observed by SMAP are generally consistent with independent measurements from the European Soil Moisture Ocean Salinity (SMOS) mission. Circulation dynamics related to the 2016/2017 period and enhanced wind-driven Scotian Shelf transport into the Gulf of Maine are discussed.

Description: Remote Sensing, Vol. 10, Pages 1230: Assisting Flood Disaster Response with Earth Observation Data and Products: A Critical Assessment Remote Sensing doi: 10.3390/rs10081230 Authors: Guy J-P. Schumann G. Robert Brakenridge Albert J. Kettner Rashid Kashif Emily Niebuhr Floods are among the top-ranking natural disasters in terms of annual cost in insured and uninsured losses. Since high-impact events often cover spatial scales that are beyond traditional regional monitoring operations, remote sensing, in particular from satellites, presents an attractive approach. Since the 1970s, there have been many studies in the scientific literature about mapping and monitoring of floods using data from various sensors onboard different satellites. The field has now matured and hence there is a general consensus among space agencies, numerous organizations, scientists, and end-users to strengthen the support that satellite missions can offer, particularly in assisting flood disaster response activities. This has stimulated more research in this area, and significant progress has been achieved in recent years in fostering our understanding of the ways in which remote sensing can support flood monitoring and assist emergency response activities. This paper reviews the products and services that currently exist to deliver actionable information about an ongoing flood disaster to emergency response operations. It also critically discusses requirements, challenges and perspectives for improving operational assistance during flood disaster using satellite remote sensing products.

Description: Sustainability, Vol. 10, Pages 2785: How Does Project Supervisor Maintain Sustainability of Project Members? A Study from Leadership Perspective Sustainability doi: 10.3390/su10082785 Authors: Han-Sheng Lei Chuan-Fu Lai Chih-Chang Chen Project members’ innovative behavior is crucial to their sustainability and successful implementation of the project. This research develops a conceptual model to explore the effect of project supervisor leadership skills on member’s innovative behavior. The model is examined by a sample of 437 project members in Taiwan. The results show that project supervisors’ emotional healing positively influences members’ innovative behavior through affect-based trust in their supervisor and supervisor conceptual skill has an inverted-U impact on members’ innovative behavior through cognition-based trust in their supervisor. This paper further discusses implications of these conclusions for additional research on the association between leadership skills and innovative behavior.

Description: Sustainability, Vol. 10, Pages 2772: Estimates of Daily PM2.5 Exposure in Beijing Using Spatio-Temporal Kriging Model Sustainability doi: 10.3390/su10082772 Authors: Jinhuang Lin An Zhang Wenhui Chen Mingshui Lin Excessive exposure to ambient (outdoor) air pollution may greatly increase the incidences of respiratory and cardiovascular diseases. Accurate reports of the spatial-temporal distribution characteristics of daily PM2.5 exposure can effectively prevent and reduce the harm caused to humans. Based on the daily average concentration data of PM2.5 in Beijing in May 2014 and the spatio-temporal kriging (STK) theory, we selected the optimal STK fitting model and compared the spatial-temporal prediction accuracy of PM2.5 using the STK method and ordinary kriging (OK) method. We also reveal the spatial-temporal distribution characteristics of the daily PM2.5 exposure in Beijing. The results show the following: (1) The fitting error of the Bilonick model (BM) model which is the smallest (0.00648), and the fitting effect of the prediction model of STK is the best for daily PM2.5 exposure. (2) The cross-examination results show that the STK model (RMSE = 8.90) has significantly lower fitting errors than the OK model (RMSE = 10.70), so its simulation prediction accuracy is higher. (3) According to the interpolation of the STK model, the daily exposure of PM2.5 in Beijing in May 2014 has good continuity in both time and space. The overall air quality is good, and overall the spatial distribution is low in the north and high in the south, with the highest concentration in the southwestern region. (4) There is a certain degree of spatial heterogeneity in the cumulative duration at the good, moderate, and polluted grades of China National Standard. The areas with the longest cumulative duration at the good, moderate and polluted grades are in the north, southeast, and southwest of the study area, respectively.

Description: Sustainability, Vol. 10, Pages 2767: On Decision Makers’ Perceptions of What an Ecological Computer Model is, What It Does, and Its Impact on Limiting Model Acceptance Sustainability doi: 10.3390/su10082767 Authors: Fabio Boschetti Michael Hughes Cheryl Jones Hector Lozano-Montes Environmental decision makers are required to understand complex ecological processes and ecological computer models are designed to facilitate this understanding. A set of interviews reveals three main perceptions affecting senior environmental decision makers’ trust in ecological computer models as decision facilitation tools: an ecological computer model is perceived as (i) a ‘black box’, (ii) processing poorly documented, sparse and out-of-date input data, and (iii) whose sensitivity to model parameters enables manipulation to produce desired outcomes justifying pre-conceived decisions. This leads to lack of trust towards both ecological computer models and model-users, including other scientists and decision makers. Model acceptance appears to depend on the amount, currency and geographical origin of input data. This is at odds with modellers’ communication style, which typically places more emphasis on highlighting the ecological computer model’s features and performance, rather than on describing the input data. Developing ‘big data’ capabilities could deliver the large, real-time, local data that may enhance acceptance. However, the size and complexity of ‘big data’ requires automated pre-processing, using modelling and algorithms that are even more inscrutable than current ecological computer models. Future trust in ecological computer models will likely depend on how this dilemma is resolved, which is likely to require improved communication between modellers and decision makers.

Description: Sustainability, Vol. 10, Pages 2777: Sustainability Assurance in Socially-Sensitive Sectors: A Worldwide Analysis of the Financial Services Industry Sustainability doi: 10.3390/su10082777 Authors: Elies Seguí-Mas Fernando Polo-Garrido Helena María Bollas-Araya Sustainability reporting and assurance have considerably increased in the last decades. Among different sectors, ‘sensitive sectors’ attracted the attention of many academics. However, most of research works were focused only on ‘environmentally-sensitive sectors’. Therefore, after the loss of trust caused by the lack of transparency due to the crisis, ‘socially-sensitive sectors’ as financial services sector needs to strengthen users’ confidence in the credibility of their reported activities. The aim of this paper is to assess assurance practices worldwide in one of the main ‘socially-sensitive sectors’: the financial services sector. We study what factors are associated with adoption of assurance and choice of assurance provider, and whether assurance statements differ across providers. Our results reveal that, compared to the global context, companies operating in the financial services sector are more likely to adopt assurance and to choose accountants as assurance providers. Our findings show that adoption of assurance depends on company size. We also found that companies using the financial services sector supplement are more prone to adopt assurance. Our results also evidence that choice of assurance provider depends on the country and listing status Finally, our research shows a great variability in assurance statements across providers.

Description: Sustainability, Vol. 10, Pages 2762: Technological Entrepreneurship: How does Environmental Turbulence Impact upon Collaboration Risk? Sustainability doi: 10.3390/su10082762 Authors: Iwona Staniec The aim of this paper is to identify the impact of environmental turbulence on the risk of cooperation in technological entrepreneurship. Multidimensional factors such as the risk of cooperation, environmental turbulence, and the reaction to operationalized changes were selected during the literature review, and were subjected to empirical verification on a 304 element sample of SMEs, which are implementing technology entrepreneurship. The study used a questionnaire interview technique conducted directly in the company, and the research tool was a specially prepared questionnaire. Because of the multidimensional character of the studied variables, structural modelling was chosen. In addition, the influence of selected mediators and moderators on the relationship between the turbulence of the environment and the risk of cooperation in technological entrepreneurship was examined. The article has been divided into five main sections. The first section constitutes the introduction to the deliberations. A detailed review of the literature, taking into account the principles of operationalization of each of the presented variables, is discussed in the second section. The methodology used is then presented. In the next section of the paper, the results of the research are presented and then a broad discussion of these results is undertaken. The last section is a summary of the conducted research and its limitations. Knowledge about the antecedents of cooperation risk allows for the minimization of the presence of adverse phenomena, while knowledge of the directions of their impact greatly enriches the experience in the management of this type of relationship. The presented research may contribute to the construction of a rational model of the cooperation risk management process, in particular, in the case of adopting resources existing within the organization.

Description: Remote Sensing, Vol. 10, Pages 1228: Generic and Automatic Markov Random Field-Based Registration for Multimodal Remote Sensing Image Using Grayscale and Gradient Information Remote Sensing doi: 10.3390/rs10081228 Authors: Li Yan Ziqi Wang Yi Liu Zhiyun Ye The automatic image registration serves as a technical prerequisite for multimodal remote sensing image fusion. Meanwhile, it is also the technical basis for change detection, image stitching and target recognition. The demands of subpixel level registration accuracy can be rarely satisfied with a multimodal image registration method based on feature matching. In light of this, we propose a Generic and automatic Markov Random Field (MRF)-based registration framework of multimodal image using grayscale and gradient information. The proposed approach performs non-rigid registration and formulates an MRF model while grayscale and gradient statistical information of a multimodal image is employed for the evaluation of similarity while the spatial weighting function is optimized simultaneously. Besides, the value space is discretized to improve the convergence speed. The developed automatic approach was validated both qualitatively and quantitatively, demonstrating its potential for a variety of multimodal remote sensing datasets and scenes. As for the registration accuracy, the average target registration error of the proposed framework is less than 1 pixel, while the maximum displacement error is less than 1 pixel. Compared with the polynomial model registration based on manual selection, the registration accuracy has been significantly improved. In the meantime, the proposed approach had the partial applicability for the multimodal image registration of large deformation scenes. It is also proved that the proposed registration framework using grayscale and gradient information outperforms the MRF-based registration using only grayscale information and only gradient information while the proposed registration framework using Gaussian function as spatial weighting function is superior to that using distance inverse weight method.

Description: Minerals, Vol. 8, Pages 337: The Compressive Strength and Microstructure of Alkali-Activated Binary Cements Developed by Combining Ceramic Sanitaryware with Fly Ash or Blast Furnace Slag Minerals doi: 10.3390/min8080337 Authors: Juan Cosa Lourdes Soriano María Victoria Borrachero Lucía Reig Jordi Payá José María Monzó The properties of a binder developed by the alkali-activation of a single waste material can improve when it is blended with different industrial by-products. This research aimed to investigate the influence of blast furnace slag (BFS) and fly ash (FA) (0–50 wt %) on the microstructure and compressive strength of alkali-activated ceramic sanitaryware (CSW). 4 wt % Ca(OH)2 was added to the CSW/FA blended samples and, given the high calcium content of BFS, the influence of BFS was analyzed with and without adding Ca(OH)2. Mortars were used to assess the compressive strength of the blended cements, and their microstructure was investigated in pastes by X-ray diffraction, thermogravimetry, and field emission scanning electron microscopy. All the samples were cured at 20 °C for 28 and 90 days and at 65 °C for 7 days. The results show that the partial replacement of CSW with BFS or FA allowed CSW to be activated at 20 °C. The CSW/BFS systems exhibited better mechanical properties than the CSW/FA blended mortars, so that maximum strength values of 54.3 MPa and 29.4 MPa were obtained in the samples prepared with 50 wt % BFS and FA, respectively, cured at 20 °C for 90 days.

Description: Remote Sensing, Vol. 10, Pages 1242: Ocean Wave Measurement Using Short-Range K-Band Narrow Beam Continuous Wave Radar Remote Sensing doi: 10.3390/rs10081242 Authors: Jian Cui Ralf Bachmayer Brad deYoung Weimin Huang We describe a technique to measure ocean wave period, height and direction. The technique is based on the characteristics of transmission and backscattering of short-range K-band narrow beam continuous wave radar at the sea surface. The short-range K-band radar transmits and receives continuous signals close to the sea surface at a low-grazing angle. By sensing the motions of a dominant facet at the sea surface that strongly scatters signals back and is located directly in front of the radar, the wave orbital velocity can be measured from the Doppler shift of the received radar signal. The period, height and direction of ocean wave are determined from the relationships among wave orbital velocity, ocean wave characteristics and the Doppler shift. Numerical simulations were performed to validate that the dominant facet exists and ocean waves are measured by sensing its motion. Validation experiments were conducted in a wave tank to verify the feasibility of the proposed ocean wave measurement method. The results of simulations and experiments demonstrate the effectiveness of the short-range K-band narrow beam continuous wave radar for the measurement of ocean waves.

Description: Remote Sensing, Vol. 10, Pages 1241: Troposphere Water Vapour Tomography: A Horizontal Parameterised Approach Remote Sensing doi: 10.3390/rs10081241 Authors: Qingzhi Zhao Yibin Yao Wanqiang Yao Global Navigation Satellite System (GNSS) troposphere tomography has become one of the most cost-effective means to obtain three-dimensional (3-d) image of the tropospheric water vapour field. Traditional methods divide the tomography area into a number of 3-d voxels and assume that the water vapour density at any voxel is a constant during the given period. However, such behaviour breaks the spatial continuity of water vapour density in a horizontal direction and the number of unknown parameters needing to be estimated is very large. This is the focus of the paper, which tries to reconstruct the water vapor field using the tomographic technique without imposing empirical horizontal and vertical constraints. The proposed approach introduces the layered functional model in each layer vertically and only an a priori constraint is imposed for the water vapor information at the location of the radiosonde station. The elevation angle mask of 30° is determined according to the distribution of intersections between the satellite rays and different layers, which avoids the impact of ray bending and the error in slant water vapor (SWV) at low elevation angles on the tomographic result. Additionally, an optimal weighting strategy is applied to the established tomographic model to obtain a reasonable result. The tomographic experiment is performed using Global Positioning System (GPS) data of 12 receivers derived from the Satellite Positioning Reference Station Network (SatRef) in Hong Kong. The quality of the established tomographic model is validated under different weather conditions and compared with the conventional tomography method using 31-day data, respectively. The numerical result shows that the proposed method is applicable and superior to the traditional one. Comparisons of integrated water vapour (IWV) of the proposed method with that derived from radiosonde and European Centre for Medium-Range Weather Forecasts (ECMWF) ERA-Interim data show that the root mean square (RMS)/Bias of their differences are 3.2/−0.8 mm and 3.3/−1.7 mm, respectively, while the values of traditional method are 5.1/−3.9 mm and 6.3/−5.9 mm, respectively. Furthermore, the water vapour density profiles are also compared with radiosonde and ECMWF data, and the values of RMS/Bias error for the proposed method are 0.88/0.06 g/m3 and 0.92/−0.08 g/m3, respectively, while the values of the traditional method are 1.33/0.38 g/m3 and 1.59/0.40 g/m3, respectively.

Description: Remote Sensing, Vol. 10, Pages 1237: Detection of Methane Plumes Using Airborne Midwave Infrared (3–5 µm) Hyperspectral Data Remote Sensing doi: 10.3390/rs10081237 Authors: Rebecca Del’ Papa Moreira Scafutto Carlos Roberto de Souza Filho Methane (CH4) display spectral features in several regions of the infrared range (0.75–14 µm), which can be used for the remote mapping of emission sources through the detection of CH4 plumes from natural seeps and leaks. Applications of hyperspectral remote sensing techniques for the detection of CH4 in the near and shortwave infrared (NIR-SWIR: 0.75–3 µm) and longwave infrared (LWIR: 7–14 µm) have been demonstrated in the literature with multiple sensors and scenarios. However, the acquisition and processing of hyperspectral data in the midwave infrared (MWIR: 3–5 µm) for this application is rather scarce. Here, a controlled field experiment was used to evaluate the potential for CH4 plume detection in the MWIR based on hyperspectral data acquired with the SEBASS airborne sensor. For comparison purposes, LWIR data were also acquired simultaneously with the same instrument. The experiment included surface and undersurface emission sources (ground stations), with flow rates ranging between 0.6–40 m3/h. The data collected in both ranges were sequentially processed using the same methodology. The CH4 plume was detected, variably, in both datasets. The gas plume was detected in all LWIR images acquired over nine gas leakage stations. In the MWIR range, the plume was detected in only four stations, wherein 18 m3/h was the lowest flux sensed. We demonstrate that the interference of target reflectance, the low contrast between plume and background and a low signal of the CH4 feature in the MWIR at ambient conditions possibly explain the inferior results observed for this range when compared to LWIR. Furthermore, we show that the acquisition time and weather conditions, including specific limits of temperature, humidity, and wind speed, proved critical for plume detection using daytime MWIR hyperspectral data.

Description: Remote Sensing, Vol. 10, Pages 1238: Refining Land Cover Classification Maps Based on Dual-Adaptive Majority Voting Strategy for Very High Resolution Remote Sensing Images Remote Sensing doi: 10.3390/rs10081238 Authors: Guoqing Cui Zhiyong Lv Guangfei Li Jón Atli Benediktsson Yudong Lu Land cover classification that uses very high resolution (VHR) remote sensing images is a topic of considerable interest. Although many classification methods have been developed, the accuracy and usability of classification systems can still be improved. In this paper, a novel post-processing approach based on a dual-adaptive majority voting strategy (D-AMVS) is proposed to improve the performance of initial classification maps. D-AMVS defines a strategy for refining each label of a classified map that is obtained by different classification methods from the same original image, and fusing the different refined classification maps to generate a final classification result. The proposed D-AMVS contains three main blocks. (1) An adaptive region is generated by gradually extending the region around a central pixel based on two predefined parameters (T1 and T2) to utilize the spatial feature of ground targets in a VHR image. (2) For each classified map, the label of the central pixel is refined according to the majority voting rule within the adaptive region. This is defined as adaptive majority voting. Each initial classified map is refined in this manner pixel by pixel. (3) Finally, the refined classified maps are used to generate a final classification map, and the label of the central pixel in the final classification map is determined by applying AMV again. Each entire classified map is scanned and refined pixel by pixel based on the proposed D-AMVS. The accuracies of the proposed D-AMVS approach are investigated with two remote sensing images with high spatial resolutions of 1.0 m and 1.3 m. Compared with the classical majority voting method and a relatively new post-processing method called the general post-classification framework, the proposed D-AMVS can achieve a land cover classification map with less noise and higher classification accuracies.

Description: Sustainability, Vol. 10, Pages 2802: Bi-Objective Scheduling Optimization for Discrete Time/Cost Trade-Off in Projects Sustainability doi: 10.3390/su10082802 Authors: Hongbo Li Zhe Xu Wenchao Wei In sustainable project management, time and cost are two critical factors affecting the success of a project. Time/cost trade-offs in projects accelerate the execution of some activities by increasing the amount of non-renewable resources committed to them and therefore shorten the project duration. The discrete time/cost trade-off problem (DTCTP) has been extensively studied during the past 20 years. However, due to its complexity, the DTCTP—especially the DTCTP curve problem (DTCTP-C)—has only been solved for relatively small instances. To the best of our knowledge, there is no computational performance analysis for solving the DTCTP-C on large project instances with up to 500 activities. This paper aims to fill this gap. We present two bi-objective heuristic algorithms for the DTCTP-C where both project duration and cost are minimized. The objective is to obtain a good appropriate efficient set for the large-scale instances. The first algorithm is based on the non-dominated sorting genetic algorithm II (NSGA-II) and uses a specially designed critical path-based crossover operator. The second algorithm is a steepest descent heuristic which generates efficient solutions by iteratively solving the DTCTP with different deadlines. Computational experiments are conducted to validate the proposed algorithms on a large set of randomly generated problem instances.

Description: Sustainability, Vol. 10, Pages 2800: A Framework for Spatiotemporal Analysis of Regional Economic Agglomeration Patterns Sustainability doi: 10.3390/su10082800 Authors: Rui Jin Jianya Gong Min Deng Yiliang Wan Xuexi Yang Understanding regional economic agglomeration patterns is critical for sustainable economic development, urban planning and proper utilization of regional resources. Taking Guangdong Province of China as the study area, this paper introduces a comprehensive research framework for analyzing regional economic agglomeration patterns and understanding their spatiotemporal characteristics. First, convergence and autocorrelation methods are applied to understand the economic spatial patterns. Then, the intercity spatial interaction model (ISIM) is proposed to measure the strength of interplay among cities, and social network analysis (SNA) based on the ISIM is utilized, which is designed to reveal the network characteristics of economic agglomerations. Finally, we perform a spatial panel data analysis to comprehensively interpret the influences of regional economic agglomerations. The results indicate that from 2001 to 2016, the economy in Guangdong showed a double-core/peripheral pattern of convergence, with strengthened intercity interactions. The strength and external spillover effects of Guangzhou and Shenzhen enhanced, while Foshan and Dongguan had relatively strong absorptive abilities. Moreover, expanding regional communication and cooperation is key to enhancing vigorous economic agglomerations and regional network ties in Guangdong by spatial panel data analysis. Our results show that this is a suitable method of reflecting regional economic agglomeration process and its spatiotemporal pattern.

Description: Sustainability, Vol. 10, Pages 2798: Bringing the Community Back: A Case Study of the Post-Earthquake Heritage Restoration in Kathmandu Valley Sustainability doi: 10.3390/su10082798 Authors: Stelios Lekakis Shobhit Shakya Vasilis Kostakis Heritage preservation is a resource-intensive activity nested among other processes in the public administration, related to identity building and touristic product enhancement. Strategies and schemata associated with heritage preservation sprang in the western world after WWII and they have been adapted, in the form of ‘heritage management’, in various contexts with questionable effectiveness regarding sustainability. Our paper discusses the case of the post-earthquake cultural, social and political landscape of the World Heritage Site of Kathmandu valley in Nepal. By reviewing the bibliography and drawing upon various case studies of post-earthquake heritage restoration, we focus on the traditional ways of managing human and cultural resources in the area as related to the modern national heritage management mechanism. We also examine how traditional practices, re-interpreted into a modern context, can point towards inclusive and sustainable forms of collaboration based on the commons. We shed light on the elements of an emerging management system that could protect the vulnerable monuments through community participation, adapted to the challenging realities of the Nepalese heritage and its stakeholders.

Description: Sustainability, Vol. 10, Pages 2792: The Causal Nexus between Oil Prices, Interest Rates, and Unemployment in Norway Using Wavelet Methods Sustainability doi: 10.3390/su10082792 Authors: Hyunjoo Kim Karlsson Yushu Li Ghazi Shukur This paper applies wavelet multi-resolution analysis (MRA), combined with two types of causality tests, to investigate causal relationships between three variables: real oil price, real interest rate, and unemployment in Norway. Impulse response functions were also utilised to examine effects of innovation in one variable on the other variables. We found that causal relations between the variables tend to be stronger as the wavelet time scale increases; specifically, there were no causal relationships between the variables at the lowest time scales of one to three months. A causal relationship between unemployment rate and interest rate was observed during the period of two quarters to two years, during which time a feedback mechanism was also detected between unemployment and interest rate. Causal relationships between oil price and both interest rate and unemployment were observed at the longest time scale of eight quarters. In conjunction with Granger causality analysis, impulse response functions showed that unemployment rates in Norway respond negatively to oil price shocks around two years after the shocks occur. As an oil exporting country, increases (or decreases) in oil prices reduce (or increase) unemployment in Norway under a time horizon of about two years; previous studies focused on oil importing economies have generally found the inverse to be true. Unlike most studies in this field, we decomposed the implicit aggregation for all time scales by applying MRA with a focus on the Norwegian economy. Thus, one main contribution of this paper is that we unveil and systematically distinguish the nature of the time-scale dependent relationship between real oil price, real interest rate, and unemployment using wavelet decomposition.

Description: Sustainability, Vol. 10, Pages 2795: Tasty or Sustainable? The Effect of Product Sensory Experience on a Sustainable New Food Product: An Application of Discrete Choice Experiments on Chianina Tinned Beef Sustainability doi: 10.3390/su10082795 Authors: Biancamaria Torquati Tiziano Tempesta Daniel Vecchiato Sonia Venanzi This study aims to contribute to the existing literature by verifying whether the degree of liking of a new food product influences people’s preferences and willingness to pay from a discrete choice experiment when dealing with sustainable food products. To this purpose, we considered the case study of the introduction into the Italian market of a new food product: tinned Chianina meat. Among the attributes considered for this new product, two in particular were related to sustainability: organic breeding and the preservation of a traditional rural landscape. Half of the respondents underwent a sensory test before taking part in the hypothetical market (discrete choice experiment), while the remaining were administered the tests in reverse order. Tasting the product before the discrete choice experiment did not produce different willingness to pay (WTP) parameters as estimated by a taste factor interaction. However, separating the respondents into those who liked or disliked the product in the tasting condition revealed differences in willingness to pay results. The preferences are different for more than 50% of the attributes considered, and the magnitude of this difference is quite relevant. The WTP for one well known and certified sustainability related attribute—organic breeding—was not affected by the liking, while, for the other—the preservation of a traditional rural landscape—the effect of liking decreases the WTP. As a consequence, we suggest that tasting and liking studies should be routinely coupled with discrete choice studies when analyzing the introduction of new food products, especially when considering sustainable attributes in the experimental design. In the case of organic products where the expectations about taste are higher, neglecting to consider their sensory perception, along with the other discrete choice experiment attributes, could seriously undermine their long lasting success on the market.

Description: Sustainability, Vol. 10, Pages 2797: The Cause and Evolution of Urban Street Vitality under the Time Dimension: Nine Cases of Streets in Nanjing City, China Sustainability doi: 10.3390/su10082797 Authors: Xiaodong Xu Xinhan Xu Peng Guan Yu Ren Wei Wang Ning Xu Street vitality is associated with a comfortable human-based public environment and urban sustainability. In most current studies, street vitality is assessed considering single or multi factors; however, the impact of time dimension is ignored. This study selects nine different year-built streets in old, main, and new urban areas, in Nanjing, China, proposes a framework to assess street vitality considering the different time dimensions and selects the following factors: street form, including building density, continuity, and height-width; street business type, including store density, function density, and permeation rate; and street accessibility, including location, the number of entrances/exits, transportation, and walkability. After calculating the values of the subfactors, a ranking method was applied to assign the ranking of impact of all factors for a comprehensive analysis. The results showed that Pipa Street, Wufu Street in a main urban area, and Hongmiao Street had the highest street vitality and the highest rankings of almost all the factors. Street vitality in different periods demonstrated that street vitality in new urban areas is lower compared with old and main urban areas.

Description: Sustainability, Vol. 10, Pages 2799: A Definition and Theoretical Review of the Circular Economy, Value Creation, and Sustainable Business Models: Where Are We Now and Where Should Research Move in the Future? Sustainability doi: 10.3390/su10082799 Authors: Tom Lahti Joakim Wincent Vinit Parida This paper contains a theory review of value creation and the implementation of next-generation sustainable business models to profit in the circular economy. While previous research has pointed to the influence of society and regulatory policy on companies’ ability to address larger sustainability concerns and to change their ways of working, the field suffers from little theoretical guidance outlining how undertake circular business mode transformation in practice. By reviewing the field’s main theories, we illustrate significant implications for how future research can study profitability and competitiveness in the circular economy. This paper introduces the central components of circular business models and discusses links to contingency theory, transaction cost theory, resource-based theory, theory on networks and industrial economics, and agency theory. Understanding the circular economy and the ways companies can compete in the circular economy based on these theories is important for establishing important new research directions for scholars of sustainable business and circular business models.

Description: Remote Sensing, Vol. 10, Pages 929: Intercomparison and Validation of SAR-Based Ice Velocity Measurement Techniques within the Greenland Ice Sheet CCI Project Remote Sensing doi: 10.3390/rs10060929 Authors: John Peter Merryman Boncori Morten Langer Andersen Jørgen Dall Anders Kusk Martijn Kamstra Signe Bech Andersen Noa Bechor Suzanne Bevan Christian Bignami Noel Gourmelen Ian Joughin Hyung-Sup Jung Adrian Luckman Jeremie Mouginot Julia Neelmeijer Eric Rignot Kilian Scharrer Thomas Nagler Bernd Scheuchl Tazio Strozzi Ice velocity is one of the products associated with the Ice Sheets Essential Climate Variable. This paper describes the intercomparison and validation of ice-velocity measurements carried out by several international research groups within the European Space Agency Greenland Ice Sheet Climate Change Initiative project, based on space-borne Synthetic Aperture Radar (SAR) data. The goal of this activity was to survey the best SAR-based measurement and error characterization approaches currently in practice. To this end, four experiments were carried out, related to different processing techniques and scenarios, namely differential SAR interferometry, multi aperture SAR interferometry and offset-tracking of incoherent as well as of partially-coherent data. For each task, participants were provided with common datasets covering areas located on the Greenland ice-sheet margin and asked to provide mean velocity maps, quality characterization and a description of processing algorithms and parameters. The results were then intercompared and validated against GPS data, revealing in several cases significant differences in terms of coverage and accuracy. The algorithmic steps and parameters influencing the coverage, accuracy and spatial resolution of the measurements are discussed in detail for each technique, as well as the consistency between quality parameters and validation results. This allows several recommendations to be formulated, in particular concerning procedures which can reduce the impact of analyst decisions, and which are often found to be the cause of sub-optimal algorithm performance.

Description: Remote Sensing, Vol. 10, Pages 926: Comparison of SNAP-Derived Sentinel-2A L2A Product to ESA Product over Europe Remote Sensing doi: 10.3390/rs10060926 Authors: Najib Djamai Richard Fernandes Sentinel-2 is a constellation of two satellites launched by the European Space Agency (ESA), respectively on 23 June 2015 and 7 March 2017, to map geophysical parameters over land surfaces. ESA provides Level 2 bottom-of-atmosphere reflectance (BOA) products (ESA-L2A) for Europe, with plans for operational global coverage, as well as the Sen2Cor (S2C) offline processor. In this study, aerosol optical thickness (AOT), precipitable water vapour (WVP) and surface reflectance from ESA-L2A products are compared with S2C output when using identical input Level 1 radiance products. Additionally, AOT and WVP are validated against reference measurement. As ESA and S2C share the same input and atmospheric correction algorithm, it was hypothesized that they should show identical validation performance and that differences between products should be negligible in comparison to the uncertainty of retrieved geophysical parameters due to radiometric uncertainty alone. Validation and intercomparison was performed for five clear-sky growing season dates for each of three ESA-L2A tiles selected to span a range of vegetation and topography as well as to be close to the AERONET measurement site. Validation of S2C (ESA) products using AERONET site measurements indicated an overall root mean square error (RMSE) of 0.06 (0.07) and a bias of 0.05 (0.09) for AOT and 0.20 cm (0.22 cm) and the bias was −0.02 cm (−0.10 cm) for WVP. Intercomparison of S2C-L2A and ESA-L2A showed an overall agreement higher than 99% for scene classification (SCL) maps and negligible differences for WVP (RMSE under 0.09 and R2 above 0.99). Larger disagreement was observed for aerosol optical thickness (AOT) (RMSE up to 0.04 and R2 as low as 0.14). For BOA reflectance, disagreement between products depends on vegetation cover density, topography slope and spectral band. The largest differences were observed for red-edge and infrared bands in mountainous vegetated areas (RMSE up to 4.9% reflectance and R2 as low as 0.53). These differences are of similar magnitude to the radiometric calibration requirements for the Sentinel 2 imager. The differences had minimal impact of commonly used vegetation indices (NDVI, NDWI, EVI), but application of the Sentinel Level 2 biophysical processor generally resulted in proportional differences in most derived vegetation parameters. It is recommended that the consistency of ESA and S2C products should be improved by the developers of the ESA and S2C processors.

Description: Sustainability, Vol. 10, Pages 1975: Sustainable Legitimacy: Chinese Government Inspections and Public Approval of Village Leadership Sustainability doi: 10.3390/su10061975 Authors: Jinrui Xi Inspections to villages are an important mechanism for the Chinese government to gain and retain its ruling legitimacy. However, whether inspections have been effectively utilized for that designated purpose of sustainable governance remains less clear. We know very little about how the Chinese government employs inspections to boost its public approval. This study sets out to examine that effect, contending that inspections to Chinese villages significantly boost the public approval of village leaderships by promoting the governing efficacy of village leaders. The consistent practice of inspections results in a sustained level of public support for the Chinese government. This causal relationship between inspections and public approval holds, first, by improving village social welfare and economic development, and second, by securing for village leaders essential political and financial support from higher authorities to better represent villagers’ interests and mediate conflicts among villagers. Using data of 961 randomly selected villages across China, the empirical analysis shows that Chinese government inspections significantly boost villagers’ approval regarding their village leaders.

Description: Minerals, Vol. 8, Pages 250: Effect of Ammonium Chloride on the Efficiency with Which Copper Sulfate Activates Marmatite: Change in Solution Composition and Regulation of Surface Composition Minerals doi: 10.3390/min8060250 Authors: Shengdong Zhang Dongxia Feng Xiong Tong Bo Yang Xian Xie Zinc sulfide minerals are the primary choice for zinc extraction and marmatite is one of the two most common zinc sulphide minerals (sphalerite and marmatite), therefore it is of great significance to study and optimize the flotation of marmatite. To improve the activation of copper sulfate on marmatite, a method involving the addition of ammonium chloride is devised. The method has been proven to be an effective way of improving the activation efficiency of copper sulfate towards marmatite under alkaline conditions. The strengthening mechanism was studied using micro-flotation, adsorption test, X-ray photoelectron spectroscopy, and by analyzing changes in solution composition. Flotation test results show that the activation effect of the copper sulfate towards marmatite is enhanced with the addition of ammonium chloride. According to the results of the adsorption measurements and X-ray photoelectron spectroscopy analysis, when the marmatite surface is activated using copper sulfate with added ammonia chloride, it adsorbs more copper sulfide and less copper hydroxide and zinc hydroxide. These changes in surface composition are believed to occur via the following process: NH3(aq) promotes the dissolution of zinc hydroxide and then facilitates the conversion of surface copper hydroxide to copper sulfide. In addition, the occurrence of Cu(NH3)n2+ can promote the adsorption of copper ions (Cu2+ can be stored as Cu(NH3)n2+ via complexation, and then, when the concentration of copper ions decreases, Cu2+ can be released through the decompositionof Cu(NH3)n2+. Hence, the copper ion concentration can be maintained and this can facilitate the adsorption of Cu2+ on marmatite). Based on a comprehensive analysis of all our results, we propose that adding ammonium chloride to the copper sulfate changes the solution components (i.e., the presence of NH3(aq) and Cu(NH3)n2+) and then regulates the surface composition of marmatite. The change in surface composition improves the hydrophobicity of mineral surface and this leads to an improvement in activation of marmatite.

Description: Remote Sensing, Vol. 10, Pages 870: Low-Frequency Sea Surface Radar Doppler Echo Remote Sensing doi: 10.3390/rs10060870 Authors: Yury Yu. Yurovsky Vladimir N. Kudryavtsev Semyon A. Grodsky Bertrand Chapron The sea surface normalized radar backscatter cross-section (NRCS) and Doppler velocity (DV) exhibit energy at low frequencies (LF) below the surface wave peak. These NRCS and DV variations are coherent and thus may produce a bias in the DV averaged over large footprints, which is important for interpretation of Doppler scatterometer measurements. To understand the origin of LF variations, the platform-borne Ka-band radar measurements with well-pronounced LF variations at frequencies below wave peak (0.19 Hz) are analyzed. These data show that the LF NRCS is coherent with wind speed at 21 m height while the LF DV is not. The NRCS-wind correlation is significant only at frequencies below 0.01 Hz indicating either differences between near-surface wind (affecting radar signal) and 21-m height wind (actually measured) or contributions of other mechanisms of LF radar signal variations. It is shown that non-linearity in NRCS-wave slope Modulation Transfer Function (MTF) and inherent averaging within radar footprint account for NRCS and DV LF variance, with the exception of VV NRCS for which almost half of the LF variance is unexplainable by these mechanisms and perhaps attributable to wind fluctuations. Although the distribution of radar DV is quasi-Gaussian, suggesting virtually little impact of non-linearity, the LF DV variations arise due to footprint averaging of correlated local DV and non-linear NRCS. Numerical simulations demonstrate that MTF non-linearity weakly affects traditional linear MTF estimate (less than 10% for typical MTF magnitudes less than 20). Thus the linear MTF is a good approximation to evaluate the DV averaged over large footprints typical of satellite observations.

Description: Remote Sensing, Vol. 10, Pages 869: The Potential and Challenges of Using Soil Moisture Active Passive (SMAP) Sea Surface Salinity to Monitor Arctic Ocean Freshwater Changes Remote Sensing doi: 10.3390/rs10060869 Authors: Wenqing Tang Simon Yueh Daqing Yang Alexander Fore Akiko Hayashi Tong Lee Severine Fournier Benjamin Holt Sea surface salinity (SSS) links various components of the Arctic freshwater system. SSS responds to freshwater inputs from river discharge, sea ice change, precipitation and evaporation, and oceanic transport through the open straits of the Pacific and Atlantic oceans. However, in situ SSS data in the Arctic Ocean are very sparse and insufficient to depict the large-scale variability to address the critical question of how climate variability and change affect the Arctic Ocean freshwater. The L-band microwave radiometer on board the NASA Soil Moisture Active Passive (SMAP) mission has been providing SSS measurements since April 2015, at approximately 60 km resolution with Arctic Ocean coverage in 1–2 days. With improved land/ice correction, the SMAP SSS algorithm that was developed at the Jet Propulsion Laboratory (JPL) is able to retrieve SSS in ice-free regions 35 km of the coast. SMAP observes a large-scale contrast in salinity between the Atlantic and Pacific sides of the Arctic Ocean, while retrievals within the Arctic Circle vary over time, depending on the sea ice coverage and river runoff. We assess the accuracy of SMAP SSS through comparative analysis with in situ salinity data collected by Argo floats, ships, gliders, and in field campaigns. Results derived from nearly 20,000 pairs of SMAP and in situ data North of 50°N collocated within a 12.5-km radius and daily time window indicate a Root Mean Square Difference (RMSD) less than ~1 psu with a correlation coefficient of 0.82 and a near unity regression slope over the entire range of salinity. In contrast, the Hybrid Coordinate Ocean Model (HYCOM) has a smaller RMSD with Argo. However, there are clear systematic biases in the HYCOM for salinity in the range of 25–30 psu, leading to a regression slope of about 0.5. In the region North of 65°N, the number of collocated samples drops more than 70%, resulting in an RMSD of about 1.2 psu. SMAP SSS in the Kara Sea shows a consistent response to discharge anomalies from the Ob’ and Yenisei rivers between 2015 and 2016, providing an assessment of runoff impact in a region where no in situ salinity data are available for validation. The Kara Sea SSS anomaly observed by SMAP is missing in the HYCOM SSS, which assimilates climatological runoffs without interannual changes. We explored the feasibility of using SMAP SSS to monitor the sea surface salinity variability at the major Arctic Ocean gateways. Results show that although the SMAP SSS is limited to about 1 psu accuracy, many large salinity changes are observable. This may lead to the potential application of satellite SSS in the Arctic monitoring system as a proxy of the upper ocean layer freshwater exchanges with subarctic oceans.

Description: Sustainability, Vol. 10, Pages 1873: Urban Foraging in Berlin: People, Plants and Practices within the Metropolitan Green Infrastructure Sustainability doi: 10.3390/su10061873 Authors: Jonah L. Landor-Yamagata Ingo Kowarik Leonie K. Fischer Gathering wild plants in cities (urban foraging) is likely an important, but understudied human-nature interaction globally. As large European cities are critically understudied in this regard, we performed in-depth ethnography-based interviews in Berlin, Germany, to shed light on the cultural background of foragers, their motivations and which plants and fungi are gathered for which purposes. Results demonstrate multiple uses of 125 taxa, mostly frequently-occurring species but also some Red List species, from a range of formal and informal greenspace types. Both native and non-native species were gathered, with significant differences in use patterns. Use for food was most common, followed by medicinal uses, and personal enjoyment was a frequent motivation, indicating that urban foraging combines provisioning and cultural ecosystem services. Familial and childhood foraging exposure were common, pointing to influences of early-in-life exposure on later-in-life activities and transgenerational aspects of the practice. Results further suggest legacy effects from the post-war and communist eras on foraging knowledge. Although non-commercial foraging is allowed in Berlin, over-harvesting was not evident. Interviews indicate that stewardship of urban biodiversity is common among foragers. Results thus suggest considering urban foraging as a promising vehicle for linking humans with nature when developing a biodiverse urban green infrastructure.

Description: Sustainability, Vol. 10, Pages 1870: A Quantitative Method for Prediction of Environmental Aspects in Construction Sites of Residential Buildings Sustainability doi: 10.3390/su10061870 Authors: Luis Claudio A. Borja Sandro Fábio César Rita Dione A. Cunha Asher Kiperstok Despite the sectoral initiatives, the construction industry faces difficulties in incorporating effective environmental impact control systems in construction sites. Most of the instruments have been adopting a qualitative approach to environmental issues, with few cases of a quantitative approach. This article introduces a quantitative method for predicting environmental aspects and impacts during the construction of residential buildings, through the integration between environmental indicators and construction cost bases. The methodology was based on the analysis of the relationships among activities, aspects and environmental impacts considered in EU Eco-Management and Audit Scheme (EMAS) for the development of the method and its mathematical representation. A case study was carried out to evaluate the method using the bill of quantities (BOQ) from two residential construction sites to measure their environmental aspects. The results suggest the usefulness of the method in the decision-making process on the allocation of control systems and, in some cases, recommending the execution of off-site services to reduce the impacts on the site’s neighborhood. Additionally, the method proved to be easy to apply to evaluate construction sites, as well as flexible to incorporate other activities, adapting to the demand of builders and municipalities to reduce the environmental impacts of construction sites.

Description: Sustainability, Vol. 10, Pages 1875: Integrating Functions for a Sustainable Urban System: A Review of Multifunctional Land Use and Circular Urban Metabolism Sustainability doi: 10.3390/su10061875 Authors: Saskia van Broekhoven Anne Lorène Vernay Cities pose environmental challenges but also offer possibilities to close material and energy loops and connect multiple societal and ecologic services. This article reviews and brings together the literature on two important new research directions that address urban sustainability by integrating functions or material flows: Circular Urban Metabolism (CUM) and Multifunctional Land Use (MLU). We focus on challenges to MLU and CUM and strategies to facilitate their realization. The review shows that although MLU and CUM differ in what they integrate, they face partly similar integration challenges. In both fields, the collaboration between actors related to particular functions (water safety, recreation), high investment costs and uncertainties about costs and benefits, and legislation that hampers integration are identified as challenges. In both fields, strategies are proposed to facilitate the collaboration between actors. However, other challenges and strategies are specific. Whilst MLU scholars mostly highlight socio-economic aspects of realizing integration, CUM scholars focus more on technical aspects. We find limited cross-fertilization between both fields so far. To stimulate discussion and knowledge exchange, we introduce ‘integration of urban functions’ as a shared idea for a sustainable urban system. To find further solutions for integration challenges, we propose conceptualizing MLU or CUM initiatives as processes of change, which requires connecting across previously separate ‘worlds’ and changing previously established monofunctional ways of working.

Description: Sustainability, Vol. 10, Pages 1868: Associations between Public Transit Usage and Bikesharing Behaviors in The United States Sustainability doi: 10.3390/su10061868 Authors: Yuanyuan Zhang Yuming Zhang Public bikesharing systems have rapidly expanded across many cities in the United States (US). Previous studies in the literature found that, in general, bikesharing is associated with public transit ridership. However, the interdependencies between public transit usage and bikesharing behaviors have been mixed and have not been fully understood. Therefore, the objective of this research is to examine the associations between the frequency of public transit usage and the probability and frequency of bikesharing usage in the US using data from the 2017 National Household Travel Survey. The respondents were asked how many times they had used public transit and bikesharing in the last 30 days. Zero-inflated negative binomial regression models were conducted to assess the associations between the frequency of public transit usage and the probability and frequency of bikesharing usage. The results show that, in general, a one-unit increase in the frequency of public transit usage is significantly associated with a 4.0% increase in the probability of bikesharing usage and a 1.4% increase in the frequency of bikesharing usage. The significantly positive relationship between the frequency of public transit usage and the frequency of bikesharing usage is more pronounced among those living in areas with higher population density or with rail service. The empirical results demonstrate that public transit usage is significantly positively associated with bikesharing usage, and suggest policy implications that improving public transit usage tends to increase the usage of bikesharing. This study also provides significant empirical evidence for the formulation of interventions and policies targeting to promote integrated transportation systems that support multimodal transportation and mutually sustainable transport networks.

Description: Sustainability, Vol. 10, Pages 1867: Organic Carbon Concentrations in High- and Low-Productivity Areas of the Sulu Sea Sustainability doi: 10.3390/su10061867 Authors: Charissa M. Ferrera Gil S. Jacinto Chen-Tung Arthur Chen Hon-Kit Lui The sequestration of anthropogenic carbon dioxide in the form of organic carbon and its eventual deposition in the sediments is an important component of the marine carbon cycle. In the Sulu Sea, Philippines, organic carbon contents in the sediments have been relatively well studied, but the processes that describe the organic carbon distributions in the water column have not been elucidated. Dissolved and particulate organic carbon (DOC, POC) concentrations were measured at several stations in the Sulu Sea during the northeast monsoon of 2007/2008 to understand the dynamics of organic carbon in this unique internal sea. Analyses of primary productivity estimates, beam attenuation coefficient (at 660 nm) profiles, and correlation coefficients among DOC, POC and other parameters (e.g., apparent oxygen utilization) at different layers of the water column indicate that surface primary productivity, upwelling, bottom intensified flows across sills, and ventilation from shallow sills, which may contain semi-labile DOC that is estimated to largely contribute to microbial respiration in the bathypelagic layer, are the major processes that affect the DOC and POC distributions in the Sulu Sea. The variability of these processes should be taken into consideration when assessing the sustainability of internal and marginal seas as carbon sinks.

Description: Sustainability, Vol. 10, Pages 1866: Efficiency Assessment of Inbound Tourist Service Using Data Envelopment Analysis Sustainability doi: 10.3390/su10061866 Authors: Han-Shen Chen Bi-Kun Tsai Gwo-Bao Liou Chi-Ming Hsieh The successful and sustainable development of inbound tourism necessitates a long-term commitment, balancing between tourism supply and tourist demands. This study manipulated a performance appraisal of tourism service quality in Taiwan with Data Envelopment Analysis (DEA) by employing input and output constructs to assess service quality efficiency. The empirical results of the estimation of technical efficiency (TE) revealed that (1) the domestic tourism market is competitive, but still needs enhancements for tourism service; (2) Mainland Chinese tourists had the highest score among all foreign tourists, followed by Hong Kong and Macau tourists, tourists from other countries, Japanese tourists, and South Korean tourists; and (3) South Korean tourists had higher travel expenditure than others, but felt less satisfaction with travel services, which can be regarded as inefficient. Tourists from other countries had lower travel expenditure, but had higher satisfaction levels, which was considered efficient based on input and output index. The findings could contribute to bridging the gap between research and practice in assessing the efficiency of inbound tourist service. Tourism practitioners should be aware of tourists’ needs and interests, as these could be key fundamentals for improving tourists’ satisfaction with Taiwan’s service offerings.

Description: Sustainability, Vol. 10, Pages 1865: sEMG-Based Gesture Recognition with Convolution Neural Networks Sustainability doi: 10.3390/su10061865 Authors: Zhen Ding Chifu Yang Zhihong Tian Chunzhi Yi Yunsheng Fu Feng Jiang The traditional classification methods for limb motion recognition based on sEMG have been deeply researched and shown promising results. However, information loss during feature extraction reduces the recognition accuracy. To obtain higher accuracy, the deep learning method was introduced. In this paper, we propose a parallel multiple-scale convolution architecture. Compared with the state-of-art methods, the proposed architecture fully considers the characteristics of the sEMG signal. Larger sizes of kernel filter than commonly used in other CNN-based hand recognition methods are adopted. Meanwhile, the characteristics of the sEMG signal, that is, muscle independence, is considered when designing the architecture. All the classification methods were evaluated on the NinaPro database. The results show that the proposed architecture has the highest recognition accuracy. Furthermore, the results indicate that parallel multiple-scale convolution architecture with larger size of kernel filter and considering muscle independence can significantly increase the classification accuracy.

Description: Sustainability, Vol. 10, Pages 1863: Cycle Tourism as a Driver for the Sustainable Development of Little-Known or Remote Territories: The Experience of the Apennine Regions of Northern Italy Sustainability doi: 10.3390/su10061863 Authors: Patrizia Gazzola Enrica Pavione Daniele Grechi Paola Ossola One form of cycle tourism can be represented features tourism that focuses on the relation between biking and the discovery of a territory. Geared toward forms of holiday that allow for the low consumption of natural resources and a connection with the landscape, cycle tourism represents a concrete expression of sustainable tourism. As an emerging phenomenon in Italy, cycle tourism requires further understanding in order to identify methods of development and applicable business models. The aim of this paper is to explore the characteristics of cycle tourism’s development in northern Italy in order to identify the links that exist between sustainability and the group of cycle tourists who prefer to spend their holidays discovering little-known or remote territories. For this study, we selected three different destinations in sensitive mountain areas that converge on the common goal to use cycling to rejuvenate the tourism sector. It has been found that the development of cycle tourism in areas not characterized by mass tourism, such as those considered here, is economically, socially, and environmentally beneficial. The business models through which cycle tourism usually develops include a bottom up approach or a top down approach, involving the cooperation of several local destination stakeholders.

Description: Sustainability, Vol. 10, Pages 1862: Vulnerability Assessment of Rural Households to Urmia Lake Drying (the Case of Shabestar Region) Sustainability doi: 10.3390/su10061862 Authors: Rasoul Maleki Mehdi Nooripoor Hossein Azadi Philippe Lebailly One of the most important environmental problems in Iran is the destruction and drying of Urmia Lake (UL). UL is one of the main causes of suitable weather for agricultural boom and tourist attraction and it should be considered that the villagers exposed to UL drying have a strong dependence on vulnerable resources such as water, air, soil and plants for their livelihoods and have low adaptive capacity with this crisis for reasons such as poverty, lack of awareness and lack of infrastructure. This study was designed to evaluate the vulnerability of rural households to UL drying in the Shabestar region. The vulnerability was calculated based on Intergovernmental Panel on Climate Change (IPCC) definition and using vulnerability index (VI). Research population included rural households of Shabestar region (N = 19,249) and about 347 households were selected as the research sample using multistage cluster sampling technique. Results showed that the average score of respondents was 0.455 (moderate) in exposure, 0.359 (moderate to low) in sensitivity, 0.404 (moderate to low) in adaptive capacity and finally, the vulnerability index (VI) was 0.470 (range of 0 to 1). 12.8% of households had low, 70.5% had medium and 16.7% had high vulnerability towards UL drying.

Description: Sustainability, Vol. 10, Pages 1861: Ecological Risk Assessment of the Southern Fujian Golden Triangle in China Based on Regional Transportation Development Sustainability doi: 10.3390/su10061861 Authors: Xinyi Yang Lina Tang Yuqiu Jia Jiantao Liu Regional transportation development (RTD) is an important stressor of urban agglomeration ecosystems. Groundwater recharge potential may be adversely affected when natural soil is replaced by impervious materials. To systematically identify the urban agglomeration ecological risk (UAER) of RTD in the southern Fujian Golden Triangle, water regulation was used as an assessment endpoint, and RTD was considered the stressor. We used the Soil Conservation Service Curve Number method (SCS-CN) to analyze the internal relationship between the assessment endpoint and the stressor factors. Then, a multi-level risk characterization method was used to show the evolutionary process of risk, and to provide a scientific basis for the management of UAER. Based on the current RTD plan, the UAER assessment shows that there is a 0.90 probability of that the risk distribution results will occur by 2030. The intensity of stress from arterial roads on the urban agglomeration ecosystem is greater than that of the railway system. By considering the development of the railway system as a factor in the stress of RTD, this study of UAER assessment differs from past studies of urban ecological risk assessment, since the latter considers only highways. We also propose a systematic method of risk assessment simulation-prediction.

Description: Sustainability, Vol. 10, Pages 1859: Culture as a Prerequisite for Sustainable Development. An Investigation into the Process of Cultural Content Digitisation in Romania Sustainability doi: 10.3390/su10061859 Authors: Mina Fanea-Ivanovici In an age of rapid technological changes, new ways of cultural production–consumption and dissemination–access to cultural content are creating great opportunities for promoting cultural heritage at home and abroad as a prerequisite for sustainable development. The aims of this paper are to scrutinize the main opportunities of the process of cultural content digitisation with a focus on Romania and to highlight the main fields in which the country is still lagging behind. The article discusses technical internet-related endowment and use of internet by households in urban and rural areas, the existing digital cultural content, the importance of open access, e-accessibility, digital archives, e-museums, e-libraries, etc., as well as the main national and European strategies and agendas that Romania has based its cultural digitisation and heritage preservation priorities on. The paper is an empirical inquiry into the progress achieved, the positioning among the other European countries and the perspectives of cultural digitisation for Romania. Such matters are important determinants of smart, sustainable and inclusive growth, as long as access to public services and cultural content is a major objective of Europe 2020 Strategy.

Description: Sustainability, Vol. 10, Pages 1860: Analysis of the Land Use and Cover Changes in the Metropolitan Area of Tepic-Xalisco (1973–2015) through Landsat Images Sustainability doi: 10.3390/su10061860 Authors: Armando Avalos Jiménez Fernando Flores Vilchez Oyolsi Nájera González Susana M. L. Marceleño Flores Land use and cover changes (LUCC) have been identified as one of the main causes of biodiversity loss and deforestation in the world. Fundamentally, the urban land use has replaced agricultural and forest cover causing loss of environmental services. Monitoring and quantifying LUCC are essential to achieve a proper land management. The objective of this study was to analyze the LUCC in the metropolitan area of Tepic-Xalisco during the period 1973–2015. To find the best fit and obtain the different land use classes, supervised classification techniques were applied using Maximum Likelihood Classification (MLC), Support Vector Machines (SVMs) and Artificial Neural Networks (ANNs). The results were validated with control points (ground truth) through cross tabulation. The best results were obtained from the SVMs method with kappa indices above 85%. The transition analysis infers that urban land has grown significantly during 42 years, increasing 62 km2 and replacing agricultural areas at a rate of 1.48 km2/year. Forest loss of 5.78 km2 annually was also identified. The results show the different land uses distribution and the dynamics developed in the past. This information may be used to simulate future LUCC and modeling different scenarios.