ALBERT

Description: Present understanding of planetary atmospheres is surveyed. The formation of the planets and their atmospheres is briefly reviewed, and attention is given to the compositions of the atmospheres of earth, Venus, and Mars, the outer planets, and Titan. Lists of the individual atmospheric gases and their concentrations are included.

Description: The discovery of concentrations of meteorites in Antarctica by Japanese field parties in 1969, and subsequently by joint U.S.-Japanese and U.S. field parties since 1976 has provided a significant new resource for understanding the origin and evolution of the solar system. The number of meteorites as well as the variety of meteorites has increased dramatically, and substantial amounts of data derived from their study has begun to appear in the scientific literature. The U.S. program of investigation has drawn on curatorial experience derived from the lunar program to: (1) develop specific collection and preliminary examination protocols; (2) provide documented samples for scientific investigations in response to specific requests; and (3) coordinate research by scientific consortia. The productivity of scientific research is significantly enhanced by these management approaches. Some of the results of the curatorial program for Antarctic meteorites carried out over the past three years are described.

Description: This paper presents the results of a series of total and spectral solar irradiance measurements made at ground surface (Table Mountain Facility, Calif., altitude 2.18 km). The spectral irradiance data are presented for the 0.3-3.0-micron spectral region for air mass 1.5.

Description: This design course is directed to studying problems related to mobile exploration of the surface of Mars. Constraints on the vehicles considered are set by the payload and performance currently envisioned by mission analysis carried out previously at the Jet Propulsion Laboratory. The students are given full flexibility to examine those aspects which suit their interests and background. There are no regularly scheduled class lectures. Weekly review meetings are held with personnel from the Jet Propulsion Laboratory, and students use JPL resources as required.

Description: The objectives of this program are as follows: modelling of dynamics of composite tubular space structure truss members; and utilization of ultrasonic waves as probes for material and defect characterization. This discussion is presented in viewgraph format.

Description: The Moon is a body rich in natural resources and full of intriguing scientific questions, and it will most certainly play a central role in the growth of near-Earth and deep space ventures of the twenty-first century. The LOP mission is an example of one way to catalog the Moon's natural resources and to answer lunar science questions in parallel. In a realistic planetary exploration program, this mission must compete with other interesting planetary missions and therefore the LOP must be as low cost and adaptable as possible. This flexibility is reflected in the LOP's heavy design emphasis on modularity. The LOP mission can easily be expanded to include new technologies, and additional orbiters could be launched into lunar orbit to provide a constellation of remote-sensing platforms. This design thus projects a broad range of possibilities for continued lunar exploration in the next century.

Description: Voyager 1 images show 14 volcanic centers wholly or partly within the Kane Patera quadrangle of Io, which are divided into four major classes: (1) shield with parallel flows; (2) shield with early radial fan shapd flows; (3) shield with radial fan shaped flows, surfaces of flows textured with longitudinal ridges; and (4) depression surrounded by plateau-forming scarp-bounded, untextured deposits. The interpretation attempted here hinges largely on the ability to distinguish lava flows from pyroclastic flows by remote sensing.

Description: Opinions conflict over the role of surface gravity in shaping impact craters on Mercury. One view holds that the effects of g are evident in measurable aspects of crater form; other investigators find little or no evidence for g's geomorphic importance. Ambiguity in the role of g and other variables in cratering on Mercury stems largely from uncertainty in identifying major geomorphic contrasts and the crater sizes at which they occur. One of these, depth/diameter (d/D), undergoes a major change at the transition from simple (bowl shaped) to complex (peaks and terraces) crater interiors. Four least-squares d/D fits for fresh craters on Mercury were attemped. The results are inconsistent. The d/D data that should resolve previous shortcomings is presented. The revised d/D distributions for simple and complex craters, which intersect at a diameter of about 5 km, support the initial thesis that g substantially influences the form of Mercury's craters.

Description: Through the Surveyor 3 and 7, and Apollo 11-17 missions a knowledge of the mechanical properties of Lunar regolith were gained. These properties, including material cohesion, friction, in-situ density, grain-size distribution and shape, and porosity, were determined by indirect means of trenching, penetration, and vane shear testing. Several of these properties were shown to be significantly different from those of terrestrial soils, such as an interlocking cohesion and tensile strength formed in the absence of moisture and particle cementation. To characterize the strength and deformation properties of Lunar regolith experiments have been conducted on a lunar soil simulant at various initial densities, fabric arrangements, and composition. These experiments included conventional triaxial compression and extension, direct tension, and combined tension-shear. Experiments have been conducted at low levels of effective confining stress. External conditions such as membrane induced confining stresses, end platten friction and material self weight have been shown to have a dramatic effect on the strength properties at low levels of confining stress. The solution has been to treat these external conditions and the specimen as a full-fledged boundary value problem rather than the idealized elemental cube of mechanics. Centrifuge modeling allows for the study of Lunar soil-structure interaction problems. In recent years centrifuge modeling has become an important tool for modeling processes that are dominated by gravity and for verifying analysis procedures and studying deformation and failure modes. Centrifuge modeling is well established for terrestrial enginering and applies equally as well to Lunar engineering. A brief review of the experiments is presented in graphic and outline form.

Description: A proposal for a multi-institutional investigation of the processes involved in the growth and maintenance of high level extended clouds is presented. Mapping of variability of the cloud and of its radiative characteristics in terms of the meteorological environment of the cloud; performance of case studies involving observation of the cloud microphysics and radiation characteristics; and investigation of the processes responsible for the generation, maintenance, and dissipation of the cloud system are recommended. Both modeling and monitoring activities are considered. The specific research projects which the author proposes to carry out are described. Suggestions for the administrative organization of the total effort are presented.

Description: The interplay of the various physical processes involved in the formation, maintenance, and decay of middle and upper tropospheric stratiform clouds is discussed. Ice phase fair weather cloud forms are considered. Simulations of cirriform clouds which attempt to incorporate the physical processes in an interactive manner were performed. A two dimensional time dependent Eulerian numerical model, which incorporates all of the important physical processes in a simplified way, is employed to investigate the role of these processes in the evolution of a cloud in an isolated atmospheric layer. Physical parameters considered are the eddy viscosity and the thermal, water vapor, and ice water eddy diffusivities.

Description: Craters within the Ganymede Jg-7 quadrangle were divided into seven mappable units. The units represent: (1) irregular or elongate craters, (2) craters with dark ejecta, (3) palimpsests, (4) secondary craters, (5) and craters of young, mature, and old age. Symbols used for crater floors include: (1) flat floors, (2) floors with pits, (3) floora with a central dome or peak, (4) and floors with a central dome and pit. Grooved terrains were divided into five mappable units. Three units of light grooved material represent small, medium, and large grooves, which are arbitrarily divided. The other two units of grooved terrain represent dark grooved materials, and reticulate grooves. Two units of ungrooved dark terrain and two units of ungrooved light terrain were defined. In Galileo Regio, two units were defined repesenting large furrowed grooves, and smaller grooves which are orthogonal to the furrowed grooves.

Description: The relative time of emplacement of some major rock units on Mars was recognized to some degree from geologic mapping using Mariner Images. Correlation charts showing the map units and their position in sequence, however, displayed little discrimination in their vertical range of occurrence. A more detailed time-stratigraphy is currently being developed as Viking geologic mapping of the planet progresses.

Description: Although many radar profiles and images of the area within 20 deg of Mercury's equator had been obtained from 1971 to 1981, at both Goldstone and Arecibo radar facilities, surprisingly little geological analysis had been done with these data until recently. Topographic profiles and radar roughness reflectivity images which can be derived from these data will be crucial in completing the geological mapping of Mercury now underway at the U.S. Geological Survey. Processing of available radar data must be completed to establish any systematic relationship between radar reflectivities and roughness, density, dielectric constant, and other related geological parameters. Specific tasks accomplished for these purposes include the following. Documentation was located and searched to establish the type and quantity of Goldstone 12.5 cm radar observations which were available for Mercury. Data has been collected during approximately 50 observation periods from 1971 to 1981. About half of the data, collected during 1972 and 1973, have been processed, but without adequate documentation. A standardized, well-documented procedure for processing and analysis for all Goldstone Earth-based observations of Mercury was established.

Description: The origin of Mars surface units and the extent of subsequent cratering play key roles in determining surface texture. At scale sizes of 0.1-10 meters, however, there is a growing body of evidence that wind is the dominant force. The direct and indirect evidence which implies that meter-scale surface texture on Mars is controlled by the wind is presented. Since radar is uniquely sensitive to structure on these scales, radio wave scattering data can provide insight on aeolian activity available from no other source.

Description: Structural and tectonic interpretations of planetary surfaces rely strongly on visual determination of regional structural grain. This grain can be very complex and confusing, and sorting out of discrete trends in time and space is of utmost importance. This study is a test of these techniques applied to a well known area having several discrete structural grains. In the Bighorn Basin region of Wyoming, a largely overlooked N10E structural grain has been verified with detailed structural analysis and indicates a significant change in stress orientation at the end of the Laramide orogeny.

Description: Two old volcano-tectonic collapse structures are exposed north and northeast of the huge shield volcano, Olympus Mons. They are semicircular and were probably low shield volcanoes similar to Alba Patera, but whose central portions have subsided or collapsed. They form the basement upon which younger volcanic materials of Alba Patera Olympus Mons have been emplaced. The oldest structure, Acheron Fossae is over 700 km across and is north of Olympus Mons. It has a surface of considerable relief broken by graben and extensive en echelon and parallel fractures and faults with varied displacements. Acheron Fossae is the most densely cratered in the Olympus Mons region. The structure must have formed very early in martian time. The second is Halex Fossae, northeast of Olympus Mons. Where exposed, it is cut by a series of arcuate grabens that become closer spaced toward its center. The radii of the fractures indicate that the structure may be at least 250 km across and centered beneath the Olympus Plains. Lava flows appear to have issued from some of the arcuate fractures and to have flowed radially away from the center of Halex Fossae. North of Halex Fossae, material of the same age as Halex Fossae overlaps Acheron Fossae.

Description: The terrain analysis software package was restructured and documentation was added. A program was written to test Johnson Space Center's four band scatterometer data for spurious signals data. A catalog of terrain roughness statistics and calibrated four frequency multipolarization scatterometer data is being published to support the maintenance of Death Valley as a radar backscatter calibration test site for all future airborne and spacecraft missions. Test pits were dug through sand covered terrains in the Eastern Sahara to define the depth and character of subsurface interfaces responsible for either backscatter or specular response in SIR-A imagery. Blocky sandstone bedrock surfaces at about 1 m depth were responsible for the brightest SIR-A returns. Irregular very dense CaCO3 cemented sand interfaces were responsible for intermediate grey tones. Ancient river valleys had the weakest response. Reexamination of SEASAT l-band imagery of U.S. deserts continues.

Description: High spatial resolution data from the Viking infrared thermal mapper (IRTM) are used to examine the Tharsis volcanoes which are situated within a vast area of low thermal inertia material very fine particle size or very high porosity, with the volcanoes having the lowest thermal inertias. Thermal infrared images of the 1823 flow on Kilauea's southwest rift zone show lower thermal inertias near the vent area where shelly pahoehoe is common while individual channelized aa flows with abundant broken pahoehoe slabs are higher thermal inertia. The increase in aa flows to the southeast leads to a general trend of increasing thermal inertias from near vent to distal areas. Martian shield volcanoes have thermal inertias equal to or higher than their surrounding plans when atmospheric effects are removed from the data. The general increase in thermal inertias away from the summit calderas is consistent with the trend of the Hawaiian 1823 flow and may be related to changing lava properties away from the summit.

Description: A photometrically and geometrically reduced data base is being produced for the Galilean Satellites using Voyager Imaging data. The basic data set used is essentially all the useful satellite images returned by Voyager. Each frame was radiometrically calibrated and many are projected into cartographic formats. Mosaics of low, medium and high resolution frames being made for each satellite consist of registered digital images with intensity values scaled through a traceable calibration procedure to normal albedo values. Many of the mosaics are being made in two versions. One version is an albedo version and the second is a maximum discrimination version in which large variations in brightness across the picture are suppressed.

Description: One unique feature on Mars is the presence of ring furrows which are apparently produced by inversion of topography at the rims of partially buried craters. Ring furrows are flat-floored trenches, circular in plan view, forming rings 7 to 50 km in diameter. The moat is on the order of 0.5 km deep and 2 to 10 km wide, and it surrounds a flat topped circular mesa or plateau that is 5 to 40 km across. The central plateau is at the same elevation or lower than the surrounding plain outside the ring. The circular nature and size range of ring furrows tend to suggest that these features are related to craters partially buried by younger lava flows. The rings have been formed by preferential removal of the exposed crater rims. Ground ice decay, sapping, or fluvial erosion removed the less resistant, porous material of crater rims while leaving the more resistant volcanic flow material. Differential erosion has thus led to a reversal of topography in which the original positive relief of the rim is reduced to a negative relief feature.

Description: The morphology of channels, valleys, chaotic and fretted terrains and many smaller features on Mars is consistent with the hypothesis that localized deterioration of thick layers of ice-rich permafrost was a dominant geologic process on the Martian surface. Such ground ice deterioration gave rise to large-scale mass movement, including sliding, slumping and sediment gravity flowage, perhaps also catastropic floods. In contrast to Earth, such mass movement processes on Mars lack effective competition from erosion by surface runoff. Therefore, Martian features due to mass movement grew to reach immense size without being greatly modified by secondary erosional processes. The Viking Mission to Mars in 1976 provided adequate measurements of the relevant physical parameters to constrain models for Martian permafrost.

Description: High-resolution pictures of talus slopes on Mars show small, dark streaks that characteristically widen downward. These streaks are different from the thin and even streaks of various albedos that stream from cliffs on talus slopes, but gradations between the two streak types occur and not all streaks can be classified with confidence. In order to study the nature and origin of the small, widening, dark streaks, all Viking pictures with a resolution of less than 100 m/pixel were surveyed. To date several hundred streaks were located, but only few are of high enough resolution to be confidently identified as widening downwards. The approximate dimensions of the streaks were measured and their shapes, numbers, position, and spacing on slopes were noted. They were plotted on a topographic map, and their relation to topography, geologic units, and regions of distinct thermal inertia and albedo were studied. Also noted was the season at which images containing streaks were acquired and the direction of illumination. Albedo measurements are in progress. Several streaks can be seen stereoscopically, but none are observed on color images. The observation of small dark streaks on talus slopes on Mars is compatible with an interpretation of their origin as eruptions of small masses of wet debris in places where steep walls intersect aquifers or where seasonal equatorial warming permits the local melting of ground ice.

Description: The valley networks of Mars are widely believed to have formed at a time when climatic conditions on the planet were significantly different from those that currently prevail. This view arises from the following observations: (1) the valleys form integrated branching networks which suggests fluid drainage, and water is the most plausible fluid, (2) the present atmosphere contains only minute amounts of water, (3) the networks appear to be more akin to terrestrial valleys that are eroded by streams of modest discharges than features that form by catastrophic floods, and (4) small streams of water will rapidly freeze under present climatic conditions. Climatic conditions at the time of formation of the valleys are studied based on the assumption that they were cut by running water.

Description: Images of the surface of Venus obtained by the Soviet Venera 9, 10, 13 and 14 landers are analyzed to provide a basis for understanding the nature of geologic processes operating there. Bedrock is exposed at the Venera 10, 13 and 14 sites and is characterized by semi-continuous, flat polygonal to subrounded patches up to several meters in width. The bedrock surface is often dominated by sub horizontal to horizontal layered plates with thicknesses of several cm and abundant linear and polygonal vertical fractures. Soils (particles 1 cm) are abundant at the Venera 9, 10 and 13 sites, but are uncommon at Venera 14. Features indicative of a strong aeolian influence (moats, dunes, wind tails) are not observed. Several hypotheses are considered for the origin of the bedrock surfaces, and it is concluded that bedrock originated from surface lava flows. The relative freshness of features observed by the Veneras suggests that erosion rates are very low or that some bedrock surfaces are geologically young.

Description: A tectonic orgin for Venus banded terrain is consistent with band spacing. Both compressional (folding) and extensional models for band formation can fit present observations. Band spacing cannot distinguish among scenarios for global heat loss and for the origin of highland terrain. Tectonic models for band formation indicate that the surface brittle layer in the venus highlands is no more than a few kilometers thick.

Description: A study to determine the feasibility of conducting experiments to simulate the aeolian environment on Venus as related to wind abrasion was completed. Ideally, such experiments should involve complete investigation of weathering, in which mechanical, thermal, and chemical parameters are taken into account. This is particularly important for Venus, where atmospheric temperatures and pressures at the surface produce an environment which is equivalent to low or medium grade metamorphic conditions on Earth. Details that describe the Venus Aeolian Abrasion Device (VAAD) are included. The VAAD device would enable experiments to be conducted with the same chemistry, temperature, pressure, and other physical properties of the Venus atmosphere near the surface. The proposed device enables the important aeolian parameters to be controlled and monitored, including particle size, velocity, impact-angle and flux, atmospheric pressure, temperature, and gas composition.

Description: Tectoism in the Valles Marineris appears to have been accompanied by volcanism. The proposed volcanic features, though probably contemporaneous with the gigantic ones in the Tharsis area, are composed of small, mafic and, possibly, somewhat larger felsic flows. The size of these features is similar to that of volcanic flows on the Earth.

Description: Experiments were carried out in a steel pressure device using controlled amounts of water and thermite melt to examine the mechanical energy released on explosive mixing following the initial contact of the two materials. An experimental design was used to allow the direct calculation of the mechanical energy by the dynamic lift of the device as recorded both optically and physically. A large number of experiments were run to accurately determine the optimum mixture of water and melt for the conversion of thermal to mechanical energy. The maximum efficiency observed was about 12% at a water/thermite mass ratio of 0.50. These experiments are the basis for the development of models of hydroexplosions and melt fragmentation. Particles collected from the experimental products are similar in size and shape to pyroclasts produced by much larger hydrovolcanic explosions. Melt rupture at optimum ratios produces very fine particles whereas rupture at high or low water/melt ratios produces large melt fragments. Grain surface textures in the experimental products are also related to the water/melt ratio and the mechanism of explosive mixing. It is thus possible to have qualitative information about the nature of the explosion from the sizes and shapes of the fragments produced.

Description: Why the lowlands of Mars are concentrated in the Northern Hemisphere and the highlands in the Southern Hemisphere is probably the most fundamental unsolved problem in martian geology. No explanation that accounts both for this asymmetric distribution and for the isostatic equilibrium across the scarp or sloping transition zone dividing the two provinces has been generally accepted; thinning of the lithosphere in the northern hemisphere by internal processes has been suggested. Because other lowland-highland distributions on Mars, Moon, and Mercury are controlled by impact basins, it is proposed that a giant basin formed early in Mars' history has caused the martian hemispheric dichotomy as well.

Description: A number of researchers have concluded that saturation equilibrium cratering exists nowhere in the solar system, and therefore that diameter distributions in even the most heavily cratered provinces reveal initial production functions related to impacting bodies. Based on this premise, different populations of impactors are identified in different epochs and regions of the solar system. These hypotheses are clearly crucial to interpreting planetary history and need further independent examination. The production function in the outer solar system may differ from that in the inner solar system, but it is also possible that viscous relaxation of ice craters or immediate flooding of craters that penetrate through an ice lithosphere into watery substrate may explain the greater deficiency of large craters on icy moons. This problem is controversial and needs more study.

Description: Properties of the planetary surface and subsurface can affect the morphology of impact craters. A mechanism was proposed to explain pedestal craters and domed floors within fresh craters on Ganymede. Voyager 1 and 2 images with resolutions = to or 3.2 km/lp were examined and 523 fresh craters were identified. For each crater, the rim and ejecta diameters were measured, and the crater was characterized by ejecta class(es), interior features, floor morphology and target terrain. Of the craters examined, 97 show moderate to prominent doming of the crater floor; 340 craters have continuous ejecta which terminates in a scarp pedestal craters, of which 86 (25%) have a high albedo diffuse deposit beyond the pedestal.

Description: A systematic survey of the entire Mariner 10 coverage of Mercury was performed to determine the number, distribution and dimensions of additional ancient basins on the planet. Ancient multi-ringed basins on Mercury can be recognized by the following criteria: (1) arcs of massif chains and isolated massifs that protrude through younger units, (2) arcuate segments of lobate ridges (rupes) that align with massifs in circular patterns, (3) arcuate scarps that are aligned with ridges and massif, and (4) isolated regions of anomalously high topography within the intercrater regions of heavily cratered terrain. All of the newly identified basins predate the mercurian intercrater plains, previously held to be the oldest geologic unit on the planet. Subsequent structural evolution of various regions was influenced by the presence of these basins. Smooth plains units appear to be more extensive than mapped by Mariner 10 and more than 90 percent of them appear to be basin contained or basin related. The concentration of extensive smooth plains material within and associated with basin structural and depositional environments suggests a volcanic origin for most of this unit, analogous to the lunar maria. Basins appear to provide the basic structural pattern of early terrestrial planetary crusts.

Description: An improved version of the Pionner-Venus orbital data was used for a statistical analysis of global radar roughness and (alpha(0)) (rho) reflectivity. Classification maps of the venusian surface are produced in a supervised manner on the basis of statistical and empirical studies of the individual data sets. The primary objective is to assess the degree of homogeneity of surface radar properties within topographic provinces in order to map possible geologic boundaries. Maps were produced by correlating two data sets at a time. Classification of specific regions, such as Ishtar, has demonstrated that distinct geological units can be identified.

Description: Interest on Venus has centered on three regions; (1) Aphrodite Terra, especially east of the main uplant portion, (2) Ishtar Terra, especially Lakshmi Planum and its bounding scarp and massifs, and (3) Beta Regio-Phoebe Regio. The last region is topographically similar to the East African rift system, and has been inferred to have a similar tectonic origin. The Aphrodite region is part of a 21,000 km long tectonic zone that seems best explained as due to extension, and that may represent hot spots clustered along an incipient divergent plate boundary. The most interesting and complex portion of this tectonic zone is that part of eastern Aphrodite between Thetis Regio and Atla Regio. In contrast, the Lakshmi Planum region has many topographic characteristics suggesting that it is a true continent, and thus indicative of convergence and a thick crust. Detailed topographic contour maps of eastern Aphrodite Terra and of Lakshmi Planum are included.

Description: The results of analyses of near infrared reflectance spectra are inconsistent with numerous previous interpretations of the Reiner Gamma Formation. These include: (1) nue ardente or volcanic ash deposits, (2) volcanically derived sublimates, (3) high albedo volcanic deposits, and (4) highlands debris emplaced as impact ejecta. These results, strongly suggest that the selective preservation of high albedo features (formed by secondaries) by a local magnetic field enhancement is not a viable hypothesis. The results are generally consistent with, but place constraints on, the cometary impact hypothesis of Schultz and co-workers. While the presence of a magnetized component was not detected in either the bright or dark portions of the Reiner Gamma Formation, this material may be present in amounts under the current detection limits.

Description: On the basis of the icy conglomerate model of cometary nuclei, various observations demonstrate the spotted nature of many or most nuclei, i.e., regions of unusual activity, either high or low. Rotation periods, spin axes and even precession of the axes are determined. The observational evidence for variations in activity over the surfaces of cometary nuclei are listed and discussed. On June 11 the comet IRAS-ARAKI-ALCOCK approached the Earth to a distance of 0.031 AU, the nearest since C/Lexell, 1770 I, providing a unique opportunity for near-nucleus observations. Preliminary analysis of these images establishes the spin axis of the nucleus, with an oblioquity to the orbit plane of approximately 50 deg, and a lag angle of sublimation approximately 35 deg from the solar meridian on the nucleus. Asymmetries of the inner coma suggests a crazy-quilt distribution of ices with differing volatility over the surface of the nucleus. The observations of Comet P/Homes 1892 III, exhibiting two 8-10 magnitude bursts, are carefully analyzed. The grazing encounter produced, besides the first great burst, an active area on the nucleus, which was rotating retrograde with a period of 16.3hr and inclination nearly 180 deg. After the first burst the total magnitude fell less than two magnitudes from November 7 to November 30 (barely naked eye) while the nuclear region remained diffuse or complex, rarely if ever showing a stellar appearance. The fading was much more rapid after the second burst. The grazing encounter distributed a volume of large chunks in the neighborhood of the nucleus, maintaining activity for weeks.

Description: Dione is one of the most geologically complex of the Saturnian satellites. Crater counts and surface morphology indicates the geologic units observed are of variable age and origin. In an attempt to understand the processes which have affected Dione, a geologic map was prepared. Several geologic units were identified; ancient heavily cratered terrain, two plains units: cratered plains and lightly cratered plains, lobate deposits, crater rim deposits and bright wispy materials.

Description: For large parts of the surfaces of the Galilean satellites there is no stereoscopic high resolution imagery, and so for shadow-free regions far from the terminator, the only method of obtaining topograpic information is photoclinometry, the technique of converting brightness variations into local surface tilts and hence into topographic profiles and contour maps. The conversion from brightness changes to slopes require knowledge of the angular photometric function for the type of planetary surface terrain being analyzed, i.e., the relationship describing the brightness of the surface as a function of the angles of incidence (I) and emergence (E) of light at a surface element. In order to investigate the effects of these changes on the shapes of topographic profiles deduced from the functions, an area of grooved terrain (lines 500-505, samples 550-650 on frame 20640.27 0060J2) using wide ranges of values of all the adjustable parameters in Hapke's new photometric function were analyzed.

Description: Exploratory work on the structure of the Ionian lithosphere is reported. The approach is to examine temperature profiles within the lithosphere that result from different distributions of sulfur and silicates and different conductive heat fluxes, then compare such profiles with observations in the expectation that only a limited set of the profiles are possible. In this preliminary work some rather simplistic assumptions were taken and the report should be viewed more as a demonstration of a method rather than a presentation of results.

Description: How much of the interannual variation in the satellite derived radiation balance can be purely attributed to changes taking place at the land surface, was examined. The role of surface latent heating was examined in relation to its control of the precipitation pattern from one year to the next.

Description: Spectroscopic and spectrophotometric data on the atmospheres of comets, the outer planets, and Titan at ultraviolet to near-infrared wavelengths were acquired. These data support an effort aimed at characterizing the physical properties and distribution of aerosol particles in the atmospheres of these bodies. New spectrophotometry was acquired of Uranus at 0.2 lambda 0.3 micrometer with IUE; archival IUE spectrophotometry of Uranus and Neptune in this wavelength range was acquired and recalibrated. New estimates of radiometric Bond albedos and global energy budges of Uranus, Neptune and Titan were published.

Description: Infrared observations were made of the outer planet satellites. These data provide vital information about the thermophysical properties of satellite surfaces, including internal heat sources for Io. Observations include both broad and narrow band measurements in the 2 to 20 micrometer spectral range. Types of observation and target priority were determined to make maximum use of existing data from Voyager and other missions, on-going and planned missions such as Galileo, were supported and techniques and data for planning new missions and instrumentation were developed.

Description: The new NASA Deep Space Network (DSN) 34-m-diameter azimuth-elevation (Az-El) antenna structure is an example of an essentially computer-automated design. In addition to pivotal comptuer Lagrange multiplier design optimization software, much of the associated pre- and post-processing was also performed by computer. The construction of one of these antennas at Goldstone, California, is well advanced and will be completed this summer. A second installation is in progress in Australia. Both atennas will be used primarily for spacecraft tracking and will operate in the 8.5-GHz, 3.5-cm (1.4-in.) wavelength microwave frequency.

Description: The general system configuration for the Mark 4A Deep Space Network is described. The arrangement and complement of antennas at the communications complexes and subsystem equipment at the signal processing centers are described. A description of the Network Operations Control Center is also presented.

Description: Previous work in the area of choosing channel quantization levels for a additive white Gaussian noise channel composed of one receiver-demodulator is reviewed, and how this applies to the Deep Space Network composed of several receiver-demodulators (space diversity reception) is shown. Viterbi decoding for the resulting quantized channel is discussed.

Description: As part of the Network Consolidation Program, the 26-meter Tracking and Communication Subnet was transferred to JPL. Along with this transfer JPL assumed responsibility for tracking and navigation support for Earth orbiter missions normally tracked by the 26-meter sites. The High Earth Orbiter (HEO) Multimission Navigation Facility was formed as a component of the Deep Space Network (DSN) Tracking System for the purpose of supporting Earth orbiter missions and certain classes of deep space missions. This facility has been implemented on a dedicated VAX 11/780 minicomputer within the Network Operations Control Center (NOCC). The primary function of the system is to process radio metric data and estimate the orbit of a spacecraft in near-Earth or deep space environment. The system is capable of processing radio metric data in near-real time and providing the quick turnaround required for Earth orbiter operations. It is also capable of generating precision spacecraft ephemeris for use by the NOCC Support Subsystem and external agencies. This article discusses the implementation and functional operation of the Multimission Navigation Subsystem and describes the support that has been provided for an array of missions.

Description: Results of station frequency stability testing performed at DSS 13 (Deep Space Station) during May 1985 through March 1986 are presented. The testing was done on X-band uplink and X- and S-band downlink subsystems as well as on end-to-end systems. The subsystem test data are useful for assessing the frequency stability of various prototype X-band uplink or downlink subsystems for purposes of making design improvements. Information derived from extensive testing at DSS 13 will be useful in the preparation of an X-band Uplink Demonstration Experiment to be conducted at DSS 13, and will also be valuable in the preparations of gravity wave experiments to be conducted at other DSN stations in the future.

Description: Two innovative thermodynamic power cycles are analytically examined for future engineering feasibility. The power cycles use a hydrogen-oxygen fuel cell for electrical energy production and use the thermal dissociation of water for regeneration of the hydrogen and oxygen. The TDS (thermal dissociation system) uses a thermal energy input at over 2000 K to thermally dissociate the water. The other cycle, the HTE (high temperature electrolyzer) system, dissociates the water using an electrolyzer operating at high temperature (1300 K) which receives its electrical energy from the fuel cell. The primary advantages of these cycles is that they are basically a no moving parts system, thus having the potential for long life and high reliability, and they have the potential for high thermal efficiency. Both cycles are shown to be classical heat engines with ideal efficiency close to Carnot cycle efficiency. The feasibility of constructing actual cycles is investigated by examining process irreversibilities and device efficiencies for the two types of cycles. The results show that while the processes and devices of the 2000 K TDS exceed current technology limits, the high temperature electrolyzer system appears to be a state-of-the-art technology development. The requirements for very high electrolyzer and fuel cell efficiencies are seen as determining the feasbility of the HTE system, and these high efficiency devices are currently being developed. It is concluded that a proof-of-concept HTE system experiment can and should be conducted.

Description: This report discusses and documents the design, development, and verification of a microcomputer-based solar cell math model for simulating the Space Station's solar array Initial Operational Capability (IOC) reference configuration. The array model is developed utilizing a linear solar cell dc math model requiring only five input parameters: short circuit current, open circuit voltage, maximum power voltage, maximum power current, and orbit inclination. The accuracy of this model is investigated using actual solar array on orbit electrical data derived from the Solar Array Flight Experiment/Dynamic Augmentation Experiment (SAFE/DAE), conducted during the STS-41D mission. This simulator provides real-time simulated performance data during the steady state portion of the Space Station orbit (i.e., array fully exposed to sunlight). Eclipse to sunlight transients and shadowing effects are not included in the analysis, but are discussed briefly. Integrating the Solar Array Simulator (SAS) into the Power Management and Distribution (PMAD) subsystem is also discussed.

Description: As a check on structure safety aspects, two approaches in seismic analysis for the large 70-m antennas are presented. The first approach, commonly used by civil engineers, utilizes known recommended design response spectra. The second approach, which is the full transient analysis, is versatile and applicable not only to earthquake loading but also to other dynamic forcing functions. The results obtained at the fundamental structural frequency show that the two approaches are in good agreement with each other and both approaches show a safe design. The results also confirm past 64-m antenna seismic studies done by the Caltech Seismology Staff.

Description: As part of the Deep Space Network (DSN) Mark IVA implementation program, the DSN frequency and timing system is currently undergoing changes. With the implementation of signal processing centers (SPC) at each deep space communications complex (DSCC), major changes to the frequency and timing distribution equipment were necessary. A functional description of the Mark IVA frequency and timing system (FTS) as it exists today and planned capabilities through 1988 is given.

Description: The velocity of the particles is required to identify the type of particles producing the ionization trails. A method of approximating the velocity of a meteor from radar data was developed. The method requires the time between the spacings of the Fresnel interference fringes, the range to the ionization trail, and the wavelength of the radar system. The orbital mechanics of the problem are evaluated, if the particles originate with the shuttle, the orbital mechanics will substantiate the relative position of the particles with the position of the shuttle. A program to determine spacecraft orbital decay due to perturbations is utilized for a preliminary evaluation of the orbital mechanics of the problem. Many assumptions concerning the size, shape, density, etc. of the particles are necessary for the preliminary evaluation. The results do not negate the possibility that the events observed by the radar are reentering particles originating from the shuttle.

Description: Improvements to the design of the Mariner spacecraft resulted in the Viking spacecraft. The Viking spacecraft would consist of two major systems - an orbiter and a lander, while the lander would provide the means for safely delivering the scientific instruments to the surface, house, and provide the necessary power source and communication links for those experiments, the orbiter would transport the lander to Mars, rovide a platform for the Viking imaging system so that proposed landing sites could be surveyed and certified, relay lander science information back to Earth, and conduct scientific observations in its own right.

Description: The physical characteristics of speech, the methods of speech masking measurement, and the effects of noise on speech communication are investigated. Topics include the speech signal and intelligibility, the effects of noise on intelligibility, the articulation index, and various devices for evaluating speech systems.

Description: The design and operations of a low cost, high rate thermal cycling facility designed for LEO conditions is described. Thermal cycling facilities were constructed with various design criteria. Some were designed to duplicate as closely as possible the conditions a cell or module would encounter while in orbit about the Earth. A typical facility to perform this type of cycling was a large vacuum system with liquid nitrogen cooled walls. The cells were heated by an AMO spectrum solar simulator, then a shutter was closed allowing the cells to give up their heat to the cold walls. This system was good at duplicating the orbital conditions but was slow and very costly to operate. Other systems used a gas atmosphere and heated the cells with radiant heat and cooled the cells by moving them into close proximity to a cold plate. The systems greatly increased the cycle times. Other systems moved the heating and cooling atmosphere into and out of the test areas and achieved reasonable cycle rates. All these systems, however, are expensive to operate.

Description: The development of the GaAs solar cells for space applications is described. The activities in the fabrication of GaAs solar panels are outlined. Panels were fabricated while introducing improved quality control, soldering laydown and testing procedures. These panels include LIPS II, San Marco Satellite, and a low concentration panel for Rockwells' evaluation. The panels and their present status are discussed.

Description: The solar array for the San Marco D/L spacecraft is described and the performance of 4 GaAs solar cell panels are examined. In comparison to the typical Si solar cell panel for San Marco D/L, it is shown that each GaAs solar cell panel provides at least 23 percent more specific power at maximum output and 28 deg C. Also described here, are several measurements that will be made to evaluate the relative performance of Si and GaAs solar cell panels during the San Marco D/L flight.

Description: The results of heteroepitaxial growth of GaAs and GaAlAs directly on Si are presented, and applications to new cell structures are suggested. The novel feature is the elimination of a Ge lattice transition region. This feature not only reduces the cost of substrate preparation, but also makes possible the fabrication of high efficiency monolithic cascade structures. All films to be discussed were grown by organometallic chemical vapor deposition at atmospheric pressure. This process yielded reproducible, large-area films of GaAs, grown directly on Si, that are tightly adherent and smooth, and are characterized by a defect density of 5 x 10(6) power/sq cm. Preliminary studies indicate that GaAlAs can also be grown in this way. A number of promising applications are suggested. Certainly these substrates are ideal for low-weight GaAs space solar ells. For very high efficiency, the absence of Ge makes the technology attractive for GaAlAs/Si monolithic cascades, in which the Si substrates would first be provided with a suitable p/n junction. An evaluation of a three bandgap cascade consisting of appropriately designed GaAlAs/GaAs/Si layers is also presented.

Description: Deep level transient spectroscopy reveals that the main electron traps for one-MeV electron irradiated GaAs cells are E9c)-0.31, E(c)-0.90 eV, and the main hole trap is due to the level. Electron trap density was found to vary from 3/tens-trillion ccm for 2/one quadrillion cm 3/3.7 quadrillion cm for 21 sextillion cm electron fluence for electron fluence; a similar result was also obtained for the hole trap density. As for the grown-in defects in the Al(x)Ga(1-x)As p-n junciton cells, only two electron traps with energies of E(c)-0.20 and E(c)-0.34 eV were observed in samples with x = 0.17, and none was found for x 0.05. Auger analysis on the Al(x)Ga(1-x) As window layer of the GaAs solar cell showed a large amount of oxygen and carbon contaminants near the surface of the AlGaAs epilayer. Thermal annealing experiment performed at 250 C for up to 100 min. showed a reduction in the density of both electron traps.

Description: A short circuit current (I sub sc) degradation model for gallium arsenide (GaAs) solar cells irradiated by protons from low energy to 100 MeV was developed. This model was found to be satisfactory in predicting the I sub sc degradation of GaAs cells, but not that of silicon (Si) cells. A modification to the aforementioned model that preserves the optical wavelength dependency in the photogeneration of minority carrier pairs was described herein. Spectral Si and GaAs response and I sub sc for the Si and GaAs solar cells were discussed, and also were presented in graph form. The overall predictability of the modified model was deemed to be satisfactory.

Description: Manufacturing technology for mass producing high efficiency GaAs solar cells is discussed. A progress using a high throughput MO-CVD reactor to produce high efficiency GaAs solar cells is discussed. Thickness and doping concentration uniformity of metal oxide chemical vapor deposition (MO-CVD) GaAs and AlGaAs layer growth are discussed. In addition, new tooling designs are given which increase the throughput of solar cell processing. To date, 2cm x 2cm AlGaAs/GaAs solar cells with efficiency up to 16.5% were produced. In order to meet throughput goals for mass producing GaAs solar cells, a large MO-CVD system (Cambridge Instrument Model MR-200) with a susceptor which was initially capable of processing 20 wafers (up to 75 mm diameter) during a single growth run was installed. In the MR-200, the sequencing of the gases and the heating power are controlled by a microprocessor-based programmable control console. Hence, operator errors can be reduced, leading to a more reproducible production sequence.

Description: Various coatings developed in the FRG (i.e., second-surface mirrors with interference filters with and without conductive layers, conductive layers on solar-cell covers, and selective absorber coatings) have been qualified by accelerated tests under simulated space environment conditions. Experiments with coatings and solar cells have shown, however, that the thermo-optical behavior can differ considerably when performed on the ground and in space because of the great difficulty in simulating the space environment realistically. The objective of this experiment is to qualify these coatings under realistic space environment conditions. In addition, the experiment will provide design criteria, techniques, and test methods to insure control of the combined space and spacecraft environment effects, such as contamination, electrical conductance, and optical degradation, on the coatings. Data to be measured include the temperature of the samples, the electrical resistance of the conductive layers of the samples, the short circuit current of the solar-cell modules, and the deposition of contaminants on the samples (using quartz crystal microbalances (QCM's)).

Description: The objective of this experiment is to evaluate the synergistic effects of the space environment on various solar-array materials, including solar cells, cover slips with various antireflectance coatings, adhesive, encapsulants, reflector materials, substrate strength materials, mast and harness materials, structural composites, and thermal control treatments. The experiment is passive and consists of an arrangement of material specimens mounted in a 3-in.-deep peripheral tray. The effects of the space environment on the specimens will be determined by comparison of preflight and postflight measurements of mechanical, electrical, and optical properties.

Description: A model that explains the flat-spot power loss phenomenon is presented. Evidence suggests that the effect is due to localized metallurgical interactions between the silicon substrate and the contact metallization. These reactions are shown to result in localized regions in which the P-N junction is destroyed and replaced with a metal semiconductor-like interface. The effects of thermal treatment, crystallographic orientation, junction depth, and metallization are shown along with a method of preventing the effect through the suppression of vacancy formation at the free surface of the contact metallization. Data indicating the effectiveness of a TiN diffusion barrier in preventing the effect are also given.

Description: Anorthosite massifs developed approximately 1.4 to 1.5 billion years ago along an arch which developed parallel to a zone of continental separation as a block which included North America, Europe, and probably Asia separated from a block which included parts of South America, Africa, India, and Australia. Anorthosite massifs also developed at the same time along a belt which runs through the continents which comprise Gondwanaland (South America), Africa, India, Australia, and Antarctica. This was a zone of continental separation which subsequently became a zone of continental collision about 1.2 billion years ago. The northern anorthosite belt also parallels an orogenic belt which was active between 1.8 and 1.7 billion years ago. Heat generated during this mountain building period helped in the formation of the anorthosites.

Description: Stratospheric limb radiance profiles versus altitude of closest approach of the line of sight to the Earth's surface have been measured before and after the Mount St. Helens eruptions by means of photographs taken from a Sun-oriented balloon gondola floating above 35 km altitude over France. Preliminary data were reported for flights in October 1979 and in May and June 1980. The radiance integrated along the line of sight as in-situ radiance (R) can be derived taking into account absorption by ozone and air. The onion peeling inversion method was used to derive the vertical radiance (R) profiles respectively. The values of R were determined in the solar azimuth. The solar elevation angles are chosen larger for the backscattering observation than for the forward scattering observation to deal with as similar illumination conditions as possible despite the Earth's sphericity.

Description: Microscopical investigation of volcanic ash collected from ground stations during Mount St. Helens eruptions reveal a distinctive bimodel size distribution with high concentrations of particle ranges at (1) 200-100 microns and (2) 20-0.1 microns. Close examination of individual particles shows that most larger ones are solidified magma particles of porous pumice with numerous gas bubbles in the interior and the smaller ones are all glassy fragments without any detectable gas bubbles. Elemental analysis demonstrates that the fine fragments all have a composition similar to that of the larger pumice particles. Laboratory experiments suggest that the formation of the fine fragments is by bursting of glassy bubbles from a partially solidified surface of a crystallizing molten magma particle. The production of gas bubbles is due to the release of absorbed gases in molten magma particles when solubility decreases during phase transition. Diffusion cloud chamber experiments strongly indicate that sub-micron volcanic fragments are highly hygroscopic and extremely active as cloud condensation nuclei. Ice crystals also are evidently formed on those fragments in a supercooled (-20 C) cloud chamber. It has been reported that charge generation from ocean volcanic eruptions is due to contact of molten lava with sea water. This seems to be insufficient to explain the observed rapid and intense lightning activities over Mount St. Helens eruptions. Therefore, a hypothesis is presented here that highly electrically charged fine solid fragments are ejected by bursting of gas bubbles from the surface of a crystallizing molten magma particles.

Description: The direct solar radiation transmission record at Mauna Loa, dating from 1958 to the present, revealed with remarkable precision the presence of stratospheric aerosol from volcanic activity. This record can be used to quantify the intensity of the stratospheric volcanic aerosol perturbation following a significant eruption in reference to the Agung event in 1963. The Mount St. Helens' stratospheric cloud was first detected by lidar at 18 km over Mauna Loa on 17 July. The atmospheric transmission was seen to decrease slightly after that time, but only a few tenths of 1 percent. Although it is still fairly early to draw a definite conclusion on the ultimate magnitude of the Mount St. Helens stratospheric aerosol from the Mauna Loa results, it can be stated that the stratospheric aerosol optical depth presently observed is comparable with that observed from Fuego which erupted in 1974. At Boulder, Colorado, the atmospheric debris from Mount St. Helens was observed by lidar on a number of occasions. Also, observations of the diffuse, total and direct transmission of solar radiation were made on June 3 and 4. The latter set of observations is useful for deriving information on the scattering properties of the volcanic cloud. The lidar and solar radiation data are presented and some of their special features are discussed.

Description: Samples of stratospheric aerosols collected with U-2 aircraft for several months following the first three major eruptions of Mount St. Helens were analyzed for ash and liquid acid content. Ash grain sizes and compositions vary depending on collection altitude, location within the drifting cloud, and days following their injection. s computers Size distributions of ash particles vary with altitude. Generally small particles are depleted more rapidly at low altitudes (12 km) than at higher altitudes (17-18 km). Although samples collected 1 day after the first eruption of May 18, 1980, were dry, flow marks on the aircraft indicated parts of the cloud contained heavy acid concentrations. Indeed, all other samples obtained within 1 to 4 days after later eruptions (May 25 and June 12, 1980) were covered with copious amounts of liquid acid. Proportions of liquid to ash varied considerably depending on sampling location and cloud age. Because the acid-coated ash globules were large, they rapidly fell from the stratosphere until, by late June 1980, only a residue of acid droplets remained. Size distributions and concentrations of these droplets varied considerably.

Description: During the planning stages of the NUSAT satellite, an obvious issue to be discussed was the method of communications to be used. The frequencies would have to be high enough to pass through the atmosphere relatively unattenuated but low enough that antennas and transmission lines would not be so critical in length and properties that unexperienced students would have difficulty with handling them. The frequencies of 450.000 MHz and 137.900 MHz were decided upon and applied for licensing. Representatives of the amateur radio satellite organization, AMSAT, were contacted for ideas. This organization seems to favor AM types of emissions such as CW to control their OSCAR series of satellites and also the current Phase 3 unit. NUSAT personnel felt, however, that there would be merit in the improved signal to noise ratio usually obtained in an FM mode. Doppler shift of the transmitted information on the NUSAT also had to be considered. The final decision was to use Audio Frequency Shift Keying (ASKF) modulated on an FM carrier. In this mode audio tones used would not shift frequency with Doppler.

Description: An instrument capable of observing the natural electron flux in the energy range from 0.1 to 12.0 kiloelectron volts is discussed for use in an experiment intended as a forerunner of a method that will utilize artificially accelerated electrons as tracer particles for electron fields parallel to the magnetic field. Effects that are of importance either as means of detecting the echo beam or as causes of beam perturbations (e.g., spacecraft charging effects and electron background) are to be studied. The use of electron accelerators as a tool to probe magnetospheric processes rather than to modify them is planned.

Description: A dual-channel video system mounted on a stabilized two-axis gimbal system (mounted on the pallet) with associated optics and data handling electronics described the low light flux observations are required for: (1) investigating ionospheric transport processes by observing Mg+ ions; (2) supporting magnetospheric electron bounce experiments; (3) measuring electron cross sections for selected atmospheric species; (4) detecting small particle contamination; and (5) studying natural auroras.

Description: A magnetometer experiment was designed to determine the local magnetic field by measuring the total of the Earth's magnetic field and that of an unknown spacecraft. The measured field vector components are available to all onboard experiments via the Spacelab command and data management system. The experiment consists of two parts, an electronic box and the magnetic field sensor. The sensor includes three independent measuring flux-gate magnetometers, each measuring one component. The physical background is the nonlinearity of the B-H curve of a ferrite material. Two coils wound around a ferrite rod are necessary. One of them, a tank coil, pumps the ferrite rod at approximately 20 kilohertz. As a consequence of the nonlinearity, many harmonics can be produced. The second coil (i.e., the detection coil) resonates to the first harmonic. If an unknown dc or low-frequency magnetic field exists, the amplitude of the first harmonic is a measure for the unknown magnetic field. The voltages detected by the sensors are to be digitized and transferred to the command and data management system.

Description: Study of sources of Lyman-alpha emission in the atmosphere, in the interplanetary medium, and perhaps in the galactic medium is planned. Sources of Lyman-alpha emission are described and a schematic of the instrument presented.

Description: The purpose of space experiments with particle accelerators (SEPAC) is to carry out active and interactive experiments on and in the Earth's ionosphere and magnetosphere. It is also intended to make an initial performance test for an overall program of Spacelab/SEPAC experiments. The instruments to be used are an electron beam accelerator, magnetoplasma dynamic arcjet, and associated diagnostic equipment. The accelerators are installed on the pallet, with monitoring and diagnostic observations being made by the gas plume release, beam-monitor TV, and particle-wave measuring instruments also mounted on the pallet. Command and display systems are installed in the module. Three major classes of investigations to be performed are vehicle charge neutralization, beam plasma physics, and beam atmosphere interactions. The first two are mainly onboard plasma physics experiments to measure the effect of phenomena in the vicinity of Spacelab. The last one is concerned with atmospheric modification and is supported by other Spacelab 1 investigations as well as by ground-based, remote sensing observations.

Description: The Tharsis ridge system appears to form a great circle around the major volcanoes. The roughly circumferential orientation of these ridges could be interpreted as the formation of a ridge system in response to a single stress field with a center near Pavonis Mons. Wise, et al. (1979) plotted the perpendiculars to strikes of ridges on the eastern flanks of Tharsis as great circles on the upper hemisphere of an equal area net. In order to further test for circular symmetry and possible other influences on ridge orientations, normals to vector means of ridge orientations were calculated using over 1850 digitized ridge segments sampled in 10 degree boxes. Orientations of individual ridge segments were weighted by their lengths, and the magnitudes of normals to vectors means were weighted by cummulative length of the ridge segments. Normals to vector means with magnitudes less than 100 km are not shown. Assuming a single fold origin for ridges, the resulting plot shows compressive stress trajectories for the ridges in the Tharsis region. The averaged compressive stress orientation around Tharsis confirm the suggestion by Wise, et al. that the ridge system is not concentric to any single point.

Description: In this paper the tectonic features of the Elysium region are identified and characterized. Identification of features was made using USGS controlled photomosaics (Elysium quadrangle, and portions of Amenthes and Cebrenia quadrangles); Viking Orbiter photographic data were used in individual cases to assist in identification. The positions and orientations of tectonic features can then be used, in conjunction with estimates of the mass of the volcanic load obtained from gravity modelling, to constrain the thickness of the elastic lithosphere in the region.

Description: Several 3.8 cm radar frames were calibrated empirically by histogram fitting, because no instrument background data is available. Then data were corrected for geometric distortion by: (1) redetermining position of individual frames using most accurate recent lunar ephemerides; (2) reprojecting frames into simple cylindrical map projection; (3) using most recent catalog of lunar craters to determine the exact positions of features identifiable on radar frames; and (4) correcting for apparent distortion (misplacement of features in frames) by resampling using a different bilinear interpolation derived for each of the parallelopideds of the set defined for each frame. A hardcopy set of corrected frames was produced. Attempts to produce a mosaic of such corrected frames continue. The resulting mosaic can be used to show the systematic relationship between photographic thermal IR and radar data at different wavelengths in a region dominated by both mare and highland terrain.

Description: Studies of the stratigraphy of southwest Coprates have led to further constraints on both the geographic extent and the relative age of the major compressional ridge forming events in the Tharsis region of Mars. Southwestern Coprates is characterized by curvilinear ridges that are regularly spaced, suggestive of harmonic folding. The western edge of the ridged plains unit of Coprates is marked by volcanic flow fronts. In an enhanced Viking-Orbiter image, a ridge can be seen completely surrounded by a flow with only a small portion of the ridge crest still exposed. Comparison of partially buried ridges on the western edge of the ridged plains to those in central Coprates suggests that flooding of the inter-ridge plains does not exceed a few hundred meters. The morphological relationship between the flow units to the west and the ridged plains indicates that the deformational events in this region predates the emplacement of the younger units.

Description: Layered deposits within Valles Marineris and its associated system of canyons have been considered to consist of two different rock types: (1) thick, competent, cliff-forming, light and dark bedded material in canyon walls, and (2) relatively thin, alternating series of light and dark layered material, both horizontal and inclined, that form rounded hills and large flat-topped mesas rising above the canyon floors. The dissimilarity in appearance between canyon wall and floor materials, as well as their contrasting patterns of erosion, have been considered strong evidence that their modes of origin were different.

Description: Significant new geologic information has been revealed by comparing 1:5 million scale geologic maps of the equatorial zone quadrangles of Mercury (H-6, H-7 and H-8) to Earth-based elevation profiles and surface reflectivity maps of Mercury obtained in the early 1970's at the Arecibo (PR) and Goldstone (CA) radar facilities. These data consist of 23 Goldstone images and profiles of polarized return data at 12.5-cm wavelength and one Arecibo profile. Radar data with 150-m vertical accuracy and 10- to 20-km horizontal resolution are available for areas between latitudes 13 N. and 11 S. In general, these data sets show excellent correlation between: (1) relative elevation and roughness differences that are reflected by mapped geologic contacts; (2) mapped ridges and scarps that display distinctive radar signatures; and (3) position and morphology of crater-and-basin topographic elements. Inferences can also be drawn about topographic and geologic terrain beyond the area imaged by Mariner 10 cameras.

Description: The scarps along the margins of the Vales Marineris display a complex assemblage of forms that have been related to a variety of mass wasting and sapping processes. These scarp segments display variations in the degree of development of spur and gully topography, the number and density of apparent sapping features and the frequency of large scale landslides which reflect the age, geology and processes of slope development throughout the Valles Marineris. This regional analysis should provide more information on the geologic evolution of the Valles Marineris as well as new insight into the relative importance of different processes in the development of the scarp forms. In order to evaluate the regional variation in scarp form and the influence of time and structure on scarp development geomorphic mapping and morphometric analysis of geologically distinct regions of Valles Marineris is being undertaken.

Description: Parallel studies of Martian geomorphic features and their analogs on Earth continue to be fruitful in deciphering the geologic history of Mars. In the context of rock weathering, the Earth-analog approach is admirably served by the study of meteorites recovered from ice sheets in Antarctica. The weathering environment of Victoria Land possesses several Mars-like attributes. Four of the five Antarctic meteorites being studied contain rust and EETA79005 further possesses a conspicuous, dark, weathering rind on one side. Secondary minerals (rust and salts) occur both on the surfaces and interiors of some of the samples and textural evidence indicates that such secondary mineralization contributed to physical weathering (by salt riving) of the rocks. Several different rust morphologies occur and emphasis is being placed on identifying the phase compositions of the various rust occurrances. A thorough understanding of terrestrial weathering features of the meteorites is a prerequisite for identifying possible Martian weathering features (if such features exist) that might be postulated to occur in some meteorites.

Description: On Mars, the association of gullied escarpments and chaotic terrain is evidence for failure and scarp retreat of poorly consolidated materials. Some martian gullies have no surface outlets and may have drained through subterranean channels. Similar features, though on a much smaller scale, can be seen in alluvium along terrestrial river banks in semiarid regions, such as the Rio Puerco Valley of central New Mexico. Many of the escarpments along the Rio Puerco are developing through formation of collapse gullies, which drain through soil pipes. Gully development can be monitored on aerial photographs taken in 1935, 1962, and 1980. A regression model was developed to quantify gully evolution over a known time span. Soil pipes and their associated collapse gullies make recognizable signatures on the air photos. The areal extent of this signature can be normalized to the scarp length of each pipe-gully system, which makes comparisons between systems possible.

Description: Geomorphic studies of impact structures in central Australia are being used to understand the complexities of fluvial dissection in the heavily cratered terrains of Mars. At Henbury, Northern Territory, approximately 12 small meteorite craters have interacted with a semiarid drainage system. The detailed mapping of the geologic and structural features at Henbury allowed this study to concentrate on degradational landforms. The breaching of crater rims by gullies was facilitated by the northward movement of sheetwash along an extensive pediment surface extending from the Bacon Range. South-facing crater rims have been preferentially breached because gullies on those sides were able to tap the largest amounts of runoff. At crater 6 a probable rim-gully system has captured the headward reaches of a pre-impact stream channel. The interactive history of impacts and drainage development is critical to understanding the relationships in the heavily cratered uplands of Mars. Whereas Henbury craters are younger than 4700 yrs. B.P., the Gosses Bluff structure formed about 130 million years ago. The bluff is essentially an etched central peak composed of resistant sandstone units. Fluvial erosion of this structure is also discussed.

Description: Photometric studies of crater related bright and dark streaks have strongly supported the hypothesis that the bright streaks are excess dust deposits and dark streaks are erosional windows in a partial dust cover. Red-blue (and red-violet) plots show that bright streaks are consistent with mosaics of bright red dust and background material. Here the plains are also consistent with a partial dust cover; the dark streak is the least covered area. Bright and dark streaks both reverse contrast relative to surrounding plains at phase angles over 100 deg in violet filter images. The similar phase behavior of both bright and dark streaks supports the idea that they are both changes in the amount of dust cover. Red-violet plots of bright streaks are most easily explained by mosaics of optically thick dust and plains material. Lengths of bright streaks are independent of their contrasts. This suggests the streak deposition, if in the mosaic patterns indicated above, is a function of available sites of deposition, rather than atmospheric dust loading. Contrasts of dark streaks with plains indicate the plains have fractional dust covers nealy as great as the maximum additional cover in bright streaks. The bright streaks thus store little of the global supply of dust.

Description: Viking Lander 1 observations on Mars were punctuated by a strong local dust storm after two martian years of mild wind conditions. Tens of micrometers of dust settled to the surface during global dust storms of the first two falls and winters; some of this dust was locally removed during the second year. A late winter local dust storm of the first year caused little or no erosion of the surface materials despite wind speeds of 25 to 30 m/s. The strong local dust storm occurred during late winter of the third martian year. Winds of this storm altered and demolished small conical piles of surface materials constructed at the onset the first winter, removed 4 to 5 mm size fragments, displaced centimeter size fragments, destroyed clouds in areas disrupted by the sampler and footpad, eroded impact pits, and darkened the sky. Movement of erosional products and tiny wind tails indicate easterly to northeasterly winds. If the 4 to 5 mm size fragments were entrained and removd by the wind, threshold friction speeds near 3 to 5 m/s would have been required for the atmospheric temperatures and pressures that prevailed during the late winter of the third year.

Description: Eastern Acidalia Planitia contains a wide variety of terrain types on which are thousands of subkilometer volcanoes. Apparent morphometric variations were previously reported as a function of terrain type for the cones in the Cydonia area and extended to the rest of Acidalia for which high resolution Viking imagery exist. Crater counts are included for the six types of plains identified, density distributions of subkilometer cones found on each type of terrain, and orphometric data by morphological subclass as a function of terrain for more than 1400 cones.

Description: There are classes of landforms whose presence on Mars is strongly suggestive, if not confirmatory, of the participation of volatiles, presumably water, in its geomorphic development: (1) valley networks, (2) outflow channels, (3) landslides, and (4) flow-ejecta blankets. The first two may represent landforms generated by the movement of volatiles from sources, while the latter two probably represent the dissipation of energy generated by forcing inputs (e.g., kinetic energy and gravity) modulated by volatiles. In many areas on Mars, all four processes have acted on the same lithologic materials and were influenced by the composition of those units, and possibility by the climatic regime at the time of their formation. One of the approaches discussed to this specific problem of landform genesis, and to the general problem of the present and past states of martian volatiles, is to attempt to constrain the distribution, amount, and history of available volatiles by using possible evidence of volatile participation expressed in the morphology of other related landforms (e.g., flow-ejecta blankets and landslides) coupled with physical models for landform genesis.

Description: Preliminary mapping shows East Butte to be a single, large cumulo-dome composed dominantly of rhyolite which can be classified into three main groups based on color and structure. The rhyolite of East Butte is aphanitic with phenocrysts of sanidine and quartz which vary from 1 to 5 mm in length. Vesicular reddish black inclusions of basalt up to 10 cm in length, found in all varieties of the East Butte rhyolites are believed to have originated from fragmentation of the basalt walls of the conduit by rhyolitic magma as it was emplaced. Most of the inclusions contain plagioclase phenocrysts. These phenocrysts measure up to 1 to 2 cm in length and have a typical euhedral, tabular habit. A 250-m diameter depression which has the appearance of a crater is located at the top of East Butte. Evidence supporting the fact that the depression is a crater is displayed by three small (3 to 5 m in height) mounds of massive rhyolite which border the depression.

Description: Some of the geological relationships observed in the Mauna Loa sulfur flow may apply in considering volcanic processes on Io. Given the presence of sulfur/sulfur compounds in the eruption plumes and on the surface of Io, it is likely that extensive secondary deposits of sulfur exist, some of which may be of fumarolic origin and analogous to the Mauna Loa deposit. Given the likelihood of silicate volcanism of Io based on the inferred material properties of some flows, and the attendant high temperatures for silicate volcanism, it is likely that the secondary surface deposits of sulfur would have been mobilized without being heated to the high viscosity stage. Mobilized sulfur flows on Io may flow long distances as a result of: (1) low viscosities in the melting range; (2) sustained effusion resulting from continued heating source area; (3) continued remobilization within the flow as a consequence of surges from the source; and (4) extension via lava tubes, or similar conduits through which there is little heat loss. Sulfur flows may form a relatively thin veneer over silicate flows and other surface units, given their fluidity and low mobilization temperature. Active splashing and splattering may spread sulfur over a wider area contributing the bright blooms observed in association with some Ionian flows.

Description: Most cratering experiments are designed to study the effects of a single hypervelocity impact into a target of uniform properties. Experiments involving multiple impacts are usually limited to low velocity projectiles and unconsolidated target materials. Gault described saturation cratering in an unconsolidated target. Quaide and Oberbeck studied crater forms produced by hypervelocity impact into layered targets. Several investigators have modeled the generation of either a regolith or megaregolith by repeated impact on planetary surfaces. Studies now in progress examine changes in crater morphology and target properties by repeated impact into an initially consolidated target. Current studies employ low velocity projectiles (2 g at 0.5 km/sec) and consolidated salt targets. Records of crater size, morphology, and accumulated ejecta thickness are maintained as impacts collect on the surface.

Description: The crater size/frequency distributions of large ( 8 km) craters on the Moon and terrestrial planets display two very different curves representing two crater populations. The heavily cratered regions of the Moon, Mercury, and Mars show the same highly structured curve which cannot be represented by a single slope distribution function. In contrast, the lunar post mare crater population has a size/frequency distribution which differs significantly from that in the highlands over the same diameter range, and can be represented by a single-slope distribution function of -2.8 differential. On areas of martian lightly cratered northern plains, the crater population is essentially identical to that of the post mare population. This indicates that the same two families of impacting objects were responsible for the cratering records on both Moon and Mars. The thickness of mantling material varies among the various plains units, and can be calculated from the depth/diameter scaling relations for martian craters.

Description: A generalized model for short period comets is developed which integrates in a fairly rigorous manner the isolation history of regions on rotating comets with specified axial orientation and the complex feedback processes involving heat, gas and dust transport, dust mantle development and coma opacity. Attention is focused on development, reconfiguration and partial or complete launching of dust mantles and the reciprocal effects of these three processes on ice surface temperature and gas and dust production. The dust mantle controls the H2O flux not only by its effect on the temperature at the ice interface but (dominantly) by its dynamic stability which strongly influences vapor diffusivity. The model includes the effects of latitude, rotation and spin axis orientation are included and applied to an initially homogeneous sphere of H2O ice and silicate using the orbital parameters of comet Encke. Numerous variations of the model, using combinations of grain size distribution, dust-to-ice ratio, latitude and spin axis orientation, are presented and discussed. Resulted for a similar nonrotating, constant Sun orientation models are also included.

Description: Imaging data from the Voyager 1 and 2 encounters with the Jupiter system provide a data set for the examination of short time-scale variations of surface features on Io. Clear evidence exists for variations near the known eruption sites and for other areas which appeared to have erupted between the encounters. Regions outside the known active eruption sites were examined in order to look for variations in the surface scattering properties which is due to undetected small-scale volcanic activity. The phase functions of many areas are intercompared in order to look for regions with phase functions outside the normal range for satellite surface properties. Areas with unusual scattering properties are related to small-scale eruptions of gas or particles. Determination of the distribution of these areas has strong implications for the resurfacing rates for Io.

Description: A fundamental limitation in the quantitative analysis of planetary geomorphology and structural geology results from the absense of topographic data. Among the studies that might be addressed, were such data available, are volumetric and slope relationships of Ionian volcanics, fracture and annealing processes in icy crusts on Europa and Ganymede, and evaluation of viscous relaxation as a means of degrading landforms on Europea, Ganymede, and Callisto. A technique for acquiring topographic data on the Galilean satellites using photoclinometry was developed and applied.