ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Maps
  • Other Sources  (3,874)
  • ENERGY PRODUCTION AND CONVERSION  (2,592)
  • INSTRUMENTATION AND PHOTOGRAPHY  (1,282)
  • 2020-2023
  • 1980-1984  (3,870)
  • 1945-1949  (3)
  • 1925-1929  (1)
Collection
  • Maps
  • Other Sources  (3,874)
Source
Keywords
Years
Year
  • 1
    facet.materialart.
    Unknown
    Si:Bi array detectors and astronomical applications of the Goddard 10 micron camera (1983)
    In:  CASI
    Details
    Publication Date: 2004-12-04
    Description: An improved 4 to 18 micron array camera system was developed at NASA Goddard SFC for astronomical photometry, using an Aerojet Electro Systems Corp. 16 x 16 Si:Bi accumulation mode charge injection device (AMCID) which could be suitable for eventual low-background spaceflight applications. An astronomical observing program using this device was carried out as a collaboration between NASA Goddard (Infrared and Radio Astronomy Branch and Micro Electronics Branch), the Harvard/Smithsonian Center for Astrophysics, and Steward Observatory of the University of Arizona. In 1983 the camera system was revised, and a new Aeroject Si:Bi array with 16 x 16 active pixels was obtained from NASA/Ames Research Center as part of a new scientific collaboration between the Ames and Goddard infrared array research groups. The 16 x 16 device had sufficiently good sensitivity, uniformity and noise characteristics to be used for successful observations at the Mt. Lemmon 60 and 61 inch telescopes in May 1983. Complete laboratory characterization of the 16 x 16 array was carried out in summer of 1983. Initial results indicate that this detector has sensitivity and noise characteristics comparable to other devices from the same generation of Aerojet arrays.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Ames Research Center, Infrared Detector Technology Workshop; 12 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 2
    facet.materialart.
    Unknown
    Distortion measurement of antennas under space simulation conditions with high accuracy and high resolution by means of holography (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The use of laser holography for measuring the distortion of antennas under space simulation conditions is described. The subject is the so-called double exposure procedure which allows to measure the distortion in the order of 1 to 30/micrometers + or - 0.5 per hologramme of an area of 4 m diameter max. The method of holography takes into account the constraints of the space simulation facility. The test method, the test set up and the constraints by the space simulation facility are described. The results of the performed tests are presented and compared with the theoretical predictions. The test on the K-Band Antenna e.g., showed a distortion of approximately 140/micrometers + or - 5/micrometers measured during the cool down from -10 C to -120 C.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center 13th Space Simulation Conf.; p 309-319
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 3
    facet.materialart.
    Unknown
    High speed, low cost, LEO-thermal-cycling facility (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The design and operations of a low cost, high rate thermal cycling facility designed for LEO conditions is described. Thermal cycling facilities were constructed with various design criteria. Some were designed to duplicate as closely as possible the conditions a cell or module would encounter while in orbit about the Earth. A typical facility to perform this type of cycling was a large vacuum system with liquid nitrogen cooled walls. The cells were heated by an AMO spectrum solar simulator, then a shutter was closed allowing the cells to give up their heat to the cold walls. This system was good at duplicating the orbital conditions but was slow and very costly to operate. Other systems used a gas atmosphere and heated the cells with radiant heat and cooled the cells by moving them into close proximity to a cold plate. The systems greatly increased the cycle times. Other systems moved the heating and cooling atmosphere into and out of the test areas and achieved reasonable cycle rates. All these systems, however, are expensive to operate.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Space Photovoltaic Res. and Technol. 1983; p 223-227
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 4
    facet.materialart.
    Unknown
    Panel fabrication utilizing GaAs solar cells (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The development of the GaAs solar cells for space applications is described. The activities in the fabrication of GaAs solar panels are outlined. Panels were fabricated while introducing improved quality control, soldering laydown and testing procedures. These panels include LIPS II, San Marco Satellite, and a low concentration panel for Rockwells' evaluation. The panels and their present status are discussed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 205-209
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 5
    facet.materialart.
    Unknown
    Preflight study of San Marco D/L GaAs solar cell panels (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The solar array for the San Marco D/L spacecraft is described and the performance of 4 GaAs solar cell panels are examined. In comparison to the typical Si solar cell panel for San Marco D/L, it is shown that each GaAs solar cell panel provides at least 23 percent more specific power at maximum output and 28 deg C. Also described here, are several measurements that will be made to evaluate the relative performance of Si and GaAs solar cell panels during the San Marco D/L flight.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 176-181
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 6
    facet.materialart.
    Unknown
    Development of GaAs/Si and GaAs/Si monolithic structures for future space solar cells (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The results of heteroepitaxial growth of GaAs and GaAlAs directly on Si are presented, and applications to new cell structures are suggested. The novel feature is the elimination of a Ge lattice transition region. This feature not only reduces the cost of substrate preparation, but also makes possible the fabrication of high efficiency monolithic cascade structures. All films to be discussed were grown by organometallic chemical vapor deposition at atmospheric pressure. This process yielded reproducible, large-area films of GaAs, grown directly on Si, that are tightly adherent and smooth, and are characterized by a defect density of 5 x 10(6) power/sq cm. Preliminary studies indicate that GaAlAs can also be grown in this way. A number of promising applications are suggested. Certainly these substrates are ideal for low-weight GaAs space solar ells. For very high efficiency, the absence of Ge makes the technology attractive for GaAlAs/Si monolithic cascades, in which the Si substrates would first be provided with a suitable p/n junction. An evaluation of a three bandgap cascade consisting of appropriately designed GaAlAs/GaAs/Si layers is also presented.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 128-139
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 7
    facet.materialart.
    Unknown
    Defect studies in one MeV electron irradiated GaAs and in Al/sub x Ga/sub l-x As P-N junction solar cells (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Deep level transient spectroscopy reveals that the main electron traps for one-MeV electron irradiated GaAs cells are E9c)-0.31, E(c)-0.90 eV, and the main hole trap is due to the level. Electron trap density was found to vary from 3/tens-trillion ccm for 2/one quadrillion cm 3/3.7 quadrillion cm for 21 sextillion cm electron fluence for electron fluence; a similar result was also obtained for the hole trap density. As for the grown-in defects in the Al(x)Ga(1-x)As p-n junciton cells, only two electron traps with energies of E(c)-0.20 and E(c)-0.34 eV were observed in samples with x = 0.17, and none was found for x 0.05. Auger analysis on the Al(x)Ga(1-x) As window layer of the GaAs solar cell showed a large amount of oxygen and carbon contaminants near the surface of the AlGaAs epilayer. Thermal annealing experiment performed at 250 C for up to 100 min. showed a reduction in the density of both electron traps.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 91-101
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 8
    facet.materialart.
    Unknown
    Model of solar cell proton damage (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A short circuit current (I sub sc) degradation model for gallium arsenide (GaAs) solar cells irradiated by protons from low energy to 100 MeV was developed. This model was found to be satisfactory in predicting the I sub sc degradation of GaAs cells, but not that of silicon (Si) cells. A modification to the aforementioned model that preserves the optical wavelength dependency in the photogeneration of minority carrier pairs was described herein. Spectral Si and GaAs response and I sub sc for the Si and GaAs solar cells were discussed, and also were presented in graph form. The overall predictability of the modified model was deemed to be satisfactory.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 56-62
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 9
    facet.materialart.
    Unknown
    Process in manufacturing high efficiency AlGaAs/GaAs solar cells by MO-CVD (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Manufacturing technology for mass producing high efficiency GaAs solar cells is discussed. A progress using a high throughput MO-CVD reactor to produce high efficiency GaAs solar cells is discussed. Thickness and doping concentration uniformity of metal oxide chemical vapor deposition (MO-CVD) GaAs and AlGaAs layer growth are discussed. In addition, new tooling designs are given which increase the throughput of solar cell processing. To date, 2cm x 2cm AlGaAs/GaAs solar cells with efficiency up to 16.5% were produced. In order to meet throughput goals for mass producing GaAs solar cells, a large MO-CVD system (Cambridge Instrument Model MR-200) with a susceptor which was initially capable of processing 20 wafers (up to 75 mm diameter) during a single growth run was installed. In the MR-200, the sequencing of the gases and the heating power are controlled by a microprocessor-based programmable control console. Hence, operator errors can be reduced, leading to a more reproducible production sequence.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 18-24
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 10
    facet.materialart.
    Unknown
    RIMSTAR: Rapid image scanning technology and archiving (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Conventional schemes for digitizing large volumes of photographic data are far too costly and time consuming to encourage the undertaking of the ambitious projects using traditional technology. There is a distinct need for fast digitizing systems such as could be derived from development of large format, optically multiplexed CCD systems designed to address these problems. The use of CCD chips for data handling and the capability of using polaroids in the optical path for reduced light scattering are discussed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 419-427
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 11
    facet.materialart.
    Unknown
    Photographic surveys of the southern sky (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Parameters of the UK 1.2 meter Schmidt telescope are described. Plates taken with this instrument are in two categories, those for systematic sky surveys and those taken at the request of research users. A collaborative project with the European Southern Observatory was undertaken to obtain a two-color survey of the sky south of -20 deg declination to complement the Palomar survey. A near infrared survey of the Galactic Plane and the Megallanic Clouds is being done. The area south of -20 deg and the zone between 0 deg and -15 deg are also being surveyed. Pending a decision on survey parameters, all available A quality prism plates are being retained to form a basis for systematic survey. Nearly half the plates taken on a service basis for the UK astronomical community are to fulfill nonsurvey requests. Plates taken for surveys which are not of A grade quality are also made available for research purposes.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 379-385
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 12
    facet.materialart.
    Unknown
    The preparation of the measurements at the PDS at the Padova Observatory: Report on an experience with the development of an astronomical data base environment (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Some software facilities used mainly for information retrieval and analysis at the Padova-Asiago Observatory are discussed. These facilities help guest and resident astronomers to make easier the preparation of plate measurements. The problems connected with the creation, use and management of a data base in a scientific (astronomical) environment are reviewed on the basis of the experience gathered during the last three years. The development plan of the user session environment and its possible applications in a computer network are briefly sketched.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 361-369
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 13
    facet.materialart.
    Unknown
    Plans for a fast image recording system at ESO (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A 256 diode-array will be installed as detector on the ESO OPTRONICS S-3000 measuring machine in order to increase the acquisition rate. A high intensity LED will be used as light source in a pulse mode. The data will be stored on a random access mass storage device as density values for later education. The scanning time for a 30 cm x 30 cm plate with a step size of 10 micron will be less than 10 hours while the dynamic range of the data is expected to be 2.5 density units with an offset of at least 1 unit.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 317-328
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 14
    facet.materialart.
    Unknown
    The automated photographic measuring facility at Cambridge (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The design and performance of the automated photographic measuring facility at Cambridge is described. It consists of a precision laser scanning microdensitometer connected to a series of computers that process the data on-line. Plates up to 350 mm square can be measured. The microdensitometer samples the plate to 12 bit accuracy at a speed of 230,000 samples/second. The positional accuracy is better than a micron. Other features include platen rotation and automatic focus.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 277-288
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 15
    facet.materialart.
    Unknown
    Techniques of isophotometry (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The expected performance of the Minnesota automated dual-plate scanner (APS) is discussed with regard to photometry, position measurement accuracy, and ability to classify images. In addition, a fast algorithm for calculating image parameters is described.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 267-276
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 16
    facet.materialart.
    Unknown
    The current status and future upgrade of the PDS at the Royal Greenwich Observatory (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Various aspects of the performance of the PDS 1010A microdensitometer are described. The primary points in an upgrade propsal for the unit are outlined. Photometric instabilities in the PDS are mentioned.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 129-134
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 17
    facet.materialart.
    Unknown
    Microdensitometer electronics modification (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Minor modifications of electronic components in the PDS 1010A microdensitometer are discussed. The operational requirements and performance limitations of the PDS are noted. Replacement of the photomultiplier and front-end analog circuitry significantly improved the photometric performance of the PDS. The improvement in density repeatability is marked, and the permissible density slew speed is greatly increased.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 121-128
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 18
    facet.materialart.
    Unknown
    Performance testing of the high altitude observatory PDS microdensitometer (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: High Altitude Observatory HAO microdensitometer undergoes monthly testing to assure its consistent performance. These tests check positional and photometric stability at the 10 micron aperture level. The HAO test procedure is designed to run without operator intervention following initial configuration of the microdensitometer for each subprocedure. Specialized test software is resident in the PDP 8. The operator selects the proper subprocedure by entering commands. Once computer control is established, it is not relinquished until the test is complete.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Astron. Microdensitometry Conf.; p 19-34
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 19
    facet.materialart.
    Unknown
    Diagnosing a PDS microdensitometer (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A number of diagnostic tests are developed for the Photometric Data System PDS 2020G microdensitometer to monitor its performance and to isolate various electromechanical problems. A number of tests which help to diagnose problems with the photometer, positional accuracy and data collection are described. The tests include: (1) scanning a razor blade edge to study the response of the photometer and zero point losses in the coordinate system, (2) scanning a long straight line to evaluate the drunkness of the stage motions, (3) scanning photometric step wedge calibrations to study the response of the photometer, and (4) measurement of a series of high signal to noise plates of the same region of the sky to evaluate the overall performance of the microdensitometer. A variety of electronic tests to isolate electromechanical problems are also performed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 3-18
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 20
    facet.materialart.
    Unknown
    Ruled and holographic gratings experiment (A0138-5) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The behavior of ruled and holographic gratings with various coatings after extended exposure to the space environments was examined. The coatings and differentiating between the influences of vacuum and solar illumination were examined. In the past, several ruled and holographic gratings with various coatings were successfully flown on rocket experiments. Future utilizations of such gratings are considered for the Space Telescope and for various Spacelab projects under development. The techniques which is used to replicate gratings can also be used to obtain a wide range of lightweight optical components, including sophisticated aspherical, highly polished mirrors.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 163-164
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 21
    facet.materialart.
    Unknown
    Investigation of critical surface degradation effects on coatings and solar cells developed in Germany (S1002) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Various coatings developed in the FRG (i.e., second-surface mirrors with interference filters with and without conductive layers, conductive layers on solar-cell covers, and selective absorber coatings) have been qualified by accelerated tests under simulated space environment conditions. Experiments with coatings and solar cells have shown, however, that the thermo-optical behavior can differ considerably when performed on the ground and in space because of the great difficulty in simulating the space environment realistically. The objective of this experiment is to qualify these coatings under realistic space environment conditions. In addition, the experiment will provide design criteria, techniques, and test methods to insure control of the combined space and spacecraft environment effects, such as contamination, electrical conductance, and optical degradation, on the coatings. Data to be measured include the temperature of the samples, the electrical resistance of the conductive layers of the samples, the short circuit current of the solar-cell modules, and the deposition of contaminants on the samples (using quartz crystal microbalances (QCM's)).
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 91-93
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 22
    facet.materialart.
    Unknown
    Solar-array-materials passive LDEF experiment (A0171) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The objective of this experiment is to evaluate the synergistic effects of the space environment on various solar-array materials, including solar cells, cover slips with various antireflectance coatings, adhesive, encapsulants, reflector materials, substrate strength materials, mast and harness materials, structural composites, and thermal control treatments. The experiment is passive and consists of an arrangement of material specimens mounted in a 3-in.-deep peripheral tray. The effects of the space environment on the specimens will be determined by comparison of preflight and postflight measurements of mechanical, electrical, and optical properties.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 86-87
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 23
    facet.materialart.
    Unknown
    Holographic data storage crystals for LDEF (A0044) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Electro-optic holographic recording systems were developed. The spaceworthiness of electro-optic crystals for use in ultrahigh capacity space data storage and retrieval systems are examined. The crystals for this experiment are included with the various electro-optical components of LDEF experiment. The effects of long-duration exposure on active optical system components is investigated. The concept of data storage in an optical-phase holographic memory is illustrated.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 152-153
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 24
    facet.materialart.
    Unknown
    Multiple-foil microabrasion package (A0023) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The specific scientific objectives of this experiment are to measure the spatial distribution, size, velocity, radiance, and composition of microparticles in near-Earth space. The technological objectives are to measure erosion rates resulting from microparticle impacts and to evaluate thin-foil meteor 'bumpers'. The combinations of sensitivity and reliability in this experiment will provide up to 1000 impacts per month for laboratory analysis and will extend current sensitivity limits by 5 orders of magnitude in mass.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 117-120
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 25
    facet.materialart.
    Unknown
    On the cause of the flat-spot phenomenon observed in silicon solar cells at low temperatures and low intensities (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A model that explains the flat-spot power loss phenomenon is presented. Evidence suggests that the effect is due to localized metallurgical interactions between the silicon substrate and the contact metallization. These reactions are shown to result in localized regions in which the P-N junction is destroyed and replaced with a metal semiconductor-like interface. The effects of thermal treatment, crystallographic orientation, junction depth, and metallization are shown along with a method of preventing the effect through the suppression of vacancy formation at the free surface of the contact metallization. Data indicating the effectiveness of a TiN diffusion barrier in preventing the effect are also given.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p 65-70
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 26
    facet.materialart.
    Unknown
    Active cavity radiometer (1981)
    In:  CASI
    Details
    Publication Date: 2006-06-04
    Description: The active cavity radiometer (ACR) experiment on the Spacelab 1 mission to measure the total solar irradiance is discussed. Short and long term variations in the total solar output of optical energy are studied. Solar total irradiance observation provides information on the solar cycle and other long term trends in solar output that are of climatological significance as well as short term solar physics phenomena. The interaction of solar radiation with the Earth's atmosphere, oceans, and land masses provides the primary driving forces for the formation of weather systems and the determination of climate. Astrophysical measurements determine the total energy flux. The principal role of the ACR observations support extended solar irradiance experiments on free flying satellites. Solar irradiance measurements are important in the establishment of the radiation scale at the solar total flux level in the international system of units (SI).
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Marshall Space Flight Center Spacelab Mission 1 Expt. Descriptions; 4 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 27
    facet.materialart.
    Unknown
    Very wide field camera (1981)
    In:  CASI
    Details
    Publication Date: 2006-06-04
    Description: The study of galactic and faint extragalactic extended sources and peculiar ultraviolet objects by a very wide field of view camera, operated in the ultraviolet photometric and spectrometric modes is discussed. The photometric mode is direct photography through filters for observation of the following sources: (1) large scale distribution of ultraviolet radiation in the Milky Way; (2) diffusion of the galactic light above the galactic plane and in front of the large absorbing clouds; (3) the optical emission of the interstellar matter; (4) stars, and starlike objects with diameters less than 3 arc minutes. In the spectrometric mode (nebular spectrograph) the light from the center of the photometric field is concentrated on a slit covering 10 degrees by 10 arc minutes on the sky.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Marshall Space Flight Center Spacelab Mission 1 Expt. Descriptions; 3 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 28
    facet.materialart.
    Unknown
    Personal miniature electrophysiological tape recorder (1981)
    In:  CASI
    Details
    Publication Date: 2006-06-05
    Description: The use of a personal miniature electrophysiological tape recorder to measure the physiological reactions of space flight personnel to space flight stress and weightlessness is described. The Oxford Instruments Medilog recorder, a battery-powered, four-channel cassette tape recorder with 24 hour endurance is carried on the person and will record EKG, EOG, EEG, and timing and event markers. The data will give information about heart rate and morphology changes, and document adaptation to zero gravity on the part of subjects who, unlike highly trained astronauts, are more representative of the normal population than were the subjects of previous space flight studies.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Marshall Space Flight Center Spacelab Mission 1 Expt. Descriptions; 2 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 29
    facet.materialart.
    Unknown
    Metric camera experiment (1981)
    In:  CASI
    Details
    Publication Date: 2006-06-04
    Description: A test of the mapping capabilities of high resolution space photography taken at the resolution limit of image motion on large film format is planned. The metric camera system and its planned operation are described.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Marshall Space Flight Center Spacelab Mission 1 Expt. Descriptions; 4 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 30
    facet.materialart.
    Unknown
    Waves in the OH emissive layer (1981)
    In:  CASI
    Details
    Publication Date: 2006-06-04
    Description: Photography and measurement of cloud-like structures of bright parallel bands observed in near infrared photography of the night sky is planned. The instrument is described and the purpose of the experiment summarized.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Marshall Space Flight Center Spacelab Mission 1 Expt. Descriptions; 2 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 31
    facet.materialart.
    Unknown
    Grille spectrometer (1981)
    In:  CASI
    Details
    Publication Date: 2006-06-04
    Description: High resolution infrared spectroscopic observations of the Earth's limb in the wavelength range characteristic of the vibrational-rotational lines of trace atmospheric constituents is planned. The instrument and its operation and the purpose of the experiments are summarized.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Marshall Space Flight Center Spacelab Mission 1 Expt. Descriptions; 3 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 32
    facet.materialart.
    Unknown
    NASA solar array flight experiment (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The NASA large flexible solar array space shuttle flight experiment is described. The 32 x 4 m wing is deployed from the shuttle bay, and experiments in electrical output, multiple deployment, and structural dynamics are planned. Both 2 x 4 cm and 5.9 x 5.9 cm cell assemblies on the array blanket are evaluated. Safety/hazards provisions are described, including emergency jettison provisions. Ground testing and hardware fabrication are summarized.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p 179-184
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 33
    facet.materialart.
    Unknown
    Large area low-cost space solar cell development (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A development program to produce 5.9 x 5.9 cm space quality silicon solar cells with a cost goal of 30 $/W is described. Cell types investigated include wraparound dielectric, mechanical wraparound and conventional contact configurations with combinations of 2 or 10 ohm/cm resistivity, back surface reflectors and/or fields, and diffused or ion implanted junctions. A single step process to cut cell and cover glass simultaneously is being developed. Results for cell and array tests are given. Large solar arrays that might use cells of this type are discussed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p 23-26
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 34
    facet.materialart.
    Unknown
    The swing to concentrator arrays (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Objectives and progress in both low concentration ratio (6 to 10) and high concentration ratio ( 100) array developments are summarized. Problems encountered include: thermal control, maldistribution of concentrated sunlight, current busing, and optical surface degradation. The potential advantages over planar arrays are an order of magnitude reduction in per unit cost of power plus increased immunity to radiation damage.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p xix-xxiv
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 35
    facet.materialart.
    Unknown
    An automatic light scattering CCN counter (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The counter is a static thermal diffusion chamber which has been modified to include an optical system for the determination of droplet concentration by the measurement of scattered light. The determination of concentration is made by measurement of the peak scattered light signal from the cloud of growing droplets which is a function of both the droplet concentration and chamber supersaturation. Because the formation of the peak is related to the rate of growth of the droplets and sedimentation, both of which are determined by supersaturation, the system calibration can be uniquely determined by comparison with an absolute counter such as a static diffusion chamber with a photographic recording system.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Desert Research Inst. The Third Intern. Cloud Condensation Nuclei Workshop; p 40-41
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 36
    facet.materialart.
    Unknown
    Cloud condensation nucleus counter by impactor sampling technique (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Unlike typical CCN counters, this device counts the numbers of water droplets condensed on aerosol particles sampled on a microcover glass at various different relative humidities. The relative humidities ranged from 75 percent to a calculated value of 110 percent. A schematic of the apparatus is shown. The individual CCN can be identified in an optical micrograph and scanning electron micrograph and may be inspected for their chemical composition later.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Desert Research Inst. The Third Intern. Cloud Condensation Nuclei Workshop; p 35-36
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 37
    facet.materialart.
    Unknown
    The CCN counter of the IOPG of Puy de Dome: Main characterisics and results of measurements (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: In performing the data analysis of the measurements achieved during the Workshop with the device, a global approach was preferred rather than an individual analysis, in order to illustrate some main characteristics in the behavior of the device with respect to a mean behavior resulting from a general survey of all the equipments involved in each experiment. The device tends generally to overestimate the CCN concentrations measured near the high supersaturations and sometimes underestimates the concentrations close to 0.1% or 0.2% of supersaturation. Despite the fact that it belongs to a type of static diffusion chamber, it shows, however, similar spectra to those obtained with other types of chambers (continuous flow diffusion chamber and haze chamber).
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Desert Research Inst. The Third Intern. Cloud Condensation Nuclei Workshop; p 17-19
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 38
    facet.materialart.
    Unknown
    Contribution to CCN Workshop report from University of Wyoming group (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The group's CCN counter is described. It is a static, horizontal, parallel plate thermal gradient diffusion chamber. Examples of the application of the CCN are presented and include the CCN spectra measured during the winter of 1978-79 near Elk Mountain, Wyoming. Comparisons of droplet concentrations derived from upwind CCN spectra are covered.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Desert Research Inst. The Third Intern. Cloud Condensation Nuclei Workshop; p 11-13
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 39
    facet.materialart.
    Unknown
    Determination of the efficiency of a proportional counter for detecting X-rays (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A parallel beam of X-rays (approximately monoenergetic) passing through a rectangular slit and scattering from two flat mirrors comprise the X-ray test. The two mirrors are arranged in a periscope geometry so that the final reflected beam is parallel to the incident beam but displaced laterally by given amount. One of the detectors used to intercept the reflected X-rays is a one dimensional gas-filled proportional counter which is sensitive to the position (in 1 dimension) at which the X-rays are incident within its detecting "window". The total length of the anode wire of the proportional counter is 120 mm and this length can be divided electronically into a maximum of 1,024 parts. Hence, the output of an experimental run would be the number of incident X-rays that registered on each of the 1,024 channels. Each channel would represent an X-ray at a different spatial location and, hence, at a different scattering angle. In order to look at a wider range of scattering angles, the detector is placed on an optical table which can be rotated.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Alabama Univ. in Huntsville The 1981 NASA(ASEE Summer Fac. Fellowship Program; 6 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 40
    facet.materialart.
    Unknown
    Measurement of the aerosol size distribution with NRL's mobility analyzer (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The size distribution was measured in the size range between 0.0057 and 0.57 micrometer radius. A description of the instrumentation and data analysis is given, together with the measured size distributions calculated for 23 experiments.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Desert Research Inst. The Third Intern. Cloud Condensation Nuclei Workshop; p 69-78
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 41
    facet.materialart.
    Unknown
    Modified MEE Industries static thermal gradient diffusion cloud chamber (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The experiments performed at the Workshop were undertaken to confirm the calculated sample volume, determine the usable range of supersaturation, and minimum detectable size. Comparison of absolute CCN concentrations with other state-of-the-art continuous flow diffusion chambers at supersaturations near 1 percent indicated that the volume used produced CCN concentrations well within the range of CCN concentrations determined at the workshop. This agreement is interpreted to mean the sample volume was correct. Direct measurements of the beam geometry done in the laboratory indicated a factor of 4-5 error. This error is apparently due to the larger apparent visible beam diameter versus the actual usable beam diameter given the droplet illumination, chamber optical geometry, microscope optics and film characteristics.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Desert Research Inst. The Third Intern. Cloud Condensation Nuclei Workshop; p 44-45
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 42
    facet.materialart.
    Unknown
    Multi-channel chopper system for a total ozone mapping spectrometer (1981)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: A multi-channel chopper system designed and built to stringent specifications is providing an excellent performance for a total ozone mapping spectrometer (TOMS). State of the art machining technology, suitable material selection, and a way to hold and position the slit plate resulted in the instrument's better than expected performance. A shutter method used for internal calibration allows compensation for the occurrence of an unlikely wavelength shift during testing, launch, or during the orbiting life of the instrument. The TOMS is part of a payload on Nimbus 7 launched on October 24, 1978.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Marshall Space Flight Center The 15th aerospace Mech. Symp.; p 63-75
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 43
    facet.materialart.
    Unknown
    Performance of the continuous flow diffusion chambers (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A brief comparative description is made of the chambers. Overall, comparisons for the various types of experiments - monodisperse, polydisperse and ambient aerosol - showed agreement among these chambers to within 15% in most cases. A careful analysis of the results indicated that a proper accounting of certain parameters would bring about much closer agreement among four of these instruments.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: The Third Intern. Cloud Condensation Nuclei Workshop; p 79-84
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 44
    facet.materialart.
    Unknown
    Description of the NRL isothermal haze chamber (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: In the IHC the critical supersaturation is inferred from the measurement of the size of particles which have grown to their equilibrium size at exactly 100 percent RH. The largest size channel corresponds to a critical supersaturation of 0.014 percent. The growth time required for particles of this size to reach their equilibrium size exceeds the 110 second residence time in the IHC. Since the supersaturation spectrum is always very steep in this region, the contribution of these larger particles which have not yet attained their equilibrium size to smaller size channels is negligible. However, failure of these particles to reach their equilibrium size could result in a significant lowering of the count in the size channel corresponding to the smaller critical supersaturation.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Desert Research Inst. The Third Intern. Cloud Condensation Nuclei Workshop; p 42-43
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 45
    facet.materialart.
    Unknown
    Static diffusion cloud chambers (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The chamber geometry and optical arrangement are described. The supersaturation range is given and consists of readings taken at five fixed points: 0.25%, 0.5%, 0.75%, 1.0%, and 1.25%. The detection system is described including light source, cameras, and photocell detectors. The temperature control and the calibration of the chamber are discussed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Desert Research Inst. The Third Intern. Cloud Condensation Nuclei Workshop; p 26-27
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 46
    facet.materialart.
    Unknown
    Description and discussion of the NRL TGDCC (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The NRL thermal gradient diffusion cloud chamber (TGDCC) consists of two plates 7.5 cm in diameter separated by 1.25 cm and covered with saturated filter paper. The cylindrical wall separating the plates is glass. The top plate is at room temperature and the bottom plate is cooled with a thermoelectric cooler. The temperature difference is measured with several sets of thermocouples. The CCN concentration was determined from the video recording. This procedure of averaging the maximum count obtained on several successive recordings at the same supersaturation results in concentrations which are somewhat higher than concentrations calculated from an average across the plateau.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Desert Research Inst. The Third Intern. Cloud Condensation Nuclei Workshop; p 14-16
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 47
    facet.materialart.
    Unknown
    Comparing dry aerosol size measurements (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Two instruments were used to size dry aerosols for the CCN experiments: the Naval Research Laboratory (NRL) instrument which uses an electrical mobility analyzer to separate the aerosol size fractions and a diffusion chamber to grow and count the particles and the University of Wyoming (WYO) aerosol monitoring system. Measurements from these two systems were usually found to be in agreement during the CCN Workshop. Two examples are presented to compare aerosol size distribution measurements of the two instruments: experiment 8 (monodisperse NaCl) and experiment 27 (polydisperse AgI). Differential (dN/dR) and cumulative plots are shown for both instruments for experiment 8 and experiment 27; also shown are Aitken particle measurements for comparison.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Desert Research Inst. The Third Intern. Cloud Condensation Nuclei Workshop; p 106-107
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 48
    facet.materialart.
    Unknown
    CCN comparisons of static diffusion chambers (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Nine CCN counters of the static diffusion (SDC) type were compared with one another and with continuous flow diffusion (CFD) chambers. The nine SDCs showed a considerable amount of variation, largely attributable to newness and/or lack of prior calibration of some units. The five more consistent instruments agreed quite well, to within at least 20 percent of the NRL mobility analyzer and to within 10 percent at 1 percent supersaturation. There was satisfactory agreement between the more reliable SDC and CFD chambers.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Desert Research Inst. The Third Intern. Cloud Condensation Nuclei Workshop; p 57-63
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 49
    facet.materialart.
    Unknown
    Diffusion tube (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The diffusion tube was designed to operate below about 0.25 percent of water supersaturation. It is simply a long tube lined on the inside with a damp chamois cloth, and heated isothermally to a few degrees centigrade above the incoming air. The diffusion coefficient for water vapor is slightly larger than that for heat, making it possible to supersaturate the airflow. This is the same principle by which transient supersaturations may occur in parallel plate cloud chambers. Only the diffusion of vapor and heat from the walls into the moving air are considered.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Desert Research Inst. The Third Intern. Cloud Condensation Nuclei Workshop; p 37-39
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 50
    facet.materialart.
    Unknown
    A description of the UK Meteorological Office CCN counter (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The chamber is a thermal gradient diffusion type with the upper plate at room temperature and the lower plate thermoelectrically cooled. The light from a 25W projector bulb is focused in a beam of approximations 1x3 mm in the central part of the chamber. The light scattered by drops is viewed in the forward direction (40 deg) by a microscope and a sensitive photodetector. Experiments were performed to relate the peak output from the photocell with the maximum number of drops in the beam recorded photographically. The microscope is used to check the calibration at low concentrations of CCN. The results of the experiments and the performance of the counter are reported.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Desert Research Inst. The Third Intern. Cloud Condensation Nuclei Workshop; p 33-34
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 51
    facet.materialart.
    Unknown
    Low concentration ratio solar array structural configuration (1984)
    In:  CASI
    Details
    Publication Date: 2006-04-03
    Description: The design and structural properties of a low concentration ratio solar array are discussed. The assembled module consists of six interconnected containers which are compactly stowed in a volume of 3.24 m(3) for delivery to orbit by the shuttle. The containers deploy in accordian fashion into a rectangular area of 19.4 x 68 meters and can be attached to the user spacecraft along the longitudinal centerline of the end container housing. Five rotary incremental actuators requiring about 8 watts each will execute the 180-degree rotation at each joint. Deployable masts (three per side) are used to extend endcaps from the housing in both directions. Each direction is extended by three masts requiring about 780 watts for about 27 minutes. Concentrator elements are extended by the endcaps and are supported by cable systems that are connected between the housings and endcaps. These power generating elements contain reflector panels which concentrate light onto the solar panels consisting of an aluminum radiator with solar cells positioned within the element base formed by the reflectors. A flat wire harness collects the power output of individual elements for transfer to the module container housing harnesses.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Langley Research Center STEP Expt. Requirements; p 185-198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 52
    facet.materialart.
    Unknown
    High-efficiency Conventional Cells Workshop (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Participants expressed more interest in GaAs cells than in Si cells. For silicon cells, the beginning of life efficiency is not a major problem but more research is needed in the end of life efficiency. The beginning of life efficiency of GaAs cells must be brought up to 20% at AMO. More proton damage tests must be conducted. Liquid phase epitaxy technology is current but chemical vapor deposition technology is more flexible. There are no obvious problems in limiting process yields. Technology transfer should occur when market demands are generated.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 251-252
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 53
    facet.materialart.
    Unknown
    Transparent arrays: Progress toward higher efficiency (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Principles and design considerations of IR transparent solar arrays are discussed. Optimization of performance of flexible solar arrays was studied. Measured solar absorptance as low as alpha s = 0.59 was achieved which leads to a predicted BOL power density of 182.7 = W/square meters. Advanced array concepts, system level cascaded panels, and transparent rigid panels are proposed and expected benefits discussed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 210-219
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 54
    facet.materialart.
    Unknown
    Development and support structures for high-power solar arrays (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A number of structurally efficient configurations for wing-type solar arrays are developed by a combination of deepening the planform of the blanket and structure and by partitioning the blanket with battens and frequent attachments to the support structure. This technique reduces the tension required to avoid a low natural frequency for the blanket, and the load reduction results in a lighter structure. The use of three different structures are investigated: the Astromast, the Extendible Support Structure (ESS), and a new beam called the STACBEAM (Stacking Triangular Articulated Compact Beam) and their relative performances are compared. The investigation of the STACBEAM is emphasized because its sequential deployment is more reliable for very long systems, and its linear deployment facilitates local attachments to the blanket and the development of a low mass deployer.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 193-204
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 55
    facet.materialart.
    Unknown
    Preliminary space station solar array structural design study (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Structurally efficient ways to support the large solar arrays (3,716 square meters which are currently considered for space station use) are examined. An erectable truss concept is presented for the on orbit construction of winged solar arrays. The means for future growth, maintenance, and repair are integrally designed into this concept. Results from parametric studies, which highlight the physical and structural differences between various configuration options are presented. Consideration is given to both solar blanket and hard panel arrays.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 182-192
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 56
    facet.materialart.
    Unknown
    Preliminary concept of a 100-kilowatt miniaturized Cassegrainian concentrator solar array (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A miniaturized Cassegrainian concentrator (MCC) solar array system is examined to assess the practicality of assembling the basic MCC element into a total array system capable of producing multi-hundred kilowatts of power for Space Platform/Space Station or other low Earth orbit long lifetime missions. Preliminary mechanical and electrical subsystems are developed in order to determine first order performance characteristics. Results of the study support the feasibility of a 100-kilowatt MCC array system with beginning-of-life (BOL) performance of 160 watts per square meter and 28 W/kg. The performance numbers are based on 20 percent efficient (at operating temperature) solar cells and 0.25-millimeter thick electroformed nickel optics. These performance numbers can be improved upon significantly with the development of higher efficiency solar cells and/or lighter weight optics.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 157-162
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 57
    facet.materialart.
    Unknown
    High-efficiency solar cells fabricated by vacuum MO-CVD (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: High-efficiency, monolithic, two-color, three-terminal solar cells were fabricated by a novel growth technique, vacuum metal-organic chemical vapor deposition. The technique uses the expensive metal alkyls efficiently and toxic gases sparingly. The fact that the outer chamber is constructed of nonbreakable stainless steel is an attractive safety feature associated with this deposition system.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 148-154
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 58
    facet.materialart.
    Unknown
    Optimal design of high-efficiency single-junction and tandem concentrator space cells at 80 deg C and 100 SUNS (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Computer analysis was used to determine the AMO conversion efficiency of single-junction crystalline cells, two-cell and three-cell crystalline tandem structures operating under 100 suns and at 80 C. For optimally designed devices, the calculated efficiencies are 24% for single-junction cells, 33 to 35% for two-cell tandem structures, and 37 to 39% for three-cell tandem structures. Practical efficiencies are expected to be about 15 relative percentage points lower in each case.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 120-127
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 59
    facet.materialart.
    Unknown
    Equivalent electron fluence for solar proton damage in GaAs shallow junction cells (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The short-circuit current reduction in GaAs shallow junction heteroface solar cells was calculated according to a simplified solar cell damage model in which the nonuniformity of the damage as a function of penetration depth is treated explicitly. Although the equivalent electron fluence was not uniquely defined for low-energy monoenergetic proton exposure, an equivalent electron fluence is found for proton spectra characteristic of the space environment. The equivalent electron fluence ratio was calculated for a typical large solar flare event for which the proton spectrum is PHI(sub p)(E) = A/E(p/sq. cm) where E is in MeV. The equivalent fluence ratio is a function of the cover glass shield thickness or the corresponding cutoff energy E(sub c). In terms of the cutoff energy, the equivalent 1 MeV electron fluence ratio is r(sub p)(E sub c) = 10(9)/E(sub c)(1.8) where E(sub c) is in units of KeV.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 112-117
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 60
    facet.materialart.
    Unknown
    Cell and defect behavior in lithium-counterdoped solar cells (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Some n(+)/p cells in which lithium is introduced as a counterdopant, by ion-implantation, into the cell's boron-doped p-region were studied. To determine if the cells radiation resistance could be significantly improved by lithium counterdoping. Defect behavior was related to cell performance using deep level transient spectroscopy. Results indicate a significantly increased radiation resistance for the lithium counterdoped cells when compared to the boron doped 1 ohm-cm control cell. The increased radiation resistance of the lithium counterdoped cells is due to the complexing of lithium with divacancies and boron. It is speculated that complexing with oxygen and single vacancies also contributes to the increased radiation resistance. Counterdoping silicon with lithium results in a different set of defects.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Space Photovoltaic Res. and Technol. 1983; p 102-110
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 61
    facet.materialart.
    Unknown
    On-orbit performance of LIPS gallium arsenide solar cell experiment (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Telemetry from the Living Plume Shield's gallium arsenide solar panel experiment was evaluated to determine degradation. The data were culled to preclude spurious results from possible shadowing or inaccurate measurements on a cold array. Two independent methods were then used to obtain the maximum power points and the various characteristics of the solar array. Fill factor, open circuit voltage, short circuit current, and series and shunt resistances were examined. The data analysis concluded that, to date, nearly all of the solar array degradation is due to the reduction in the short circuit current.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 81-89
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 62
    facet.materialart.
    Unknown
    Radiation tolerance of low resistivity, high voltage silicon solar cells (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The radiation tolerance of the following three low resistivity, high voltage silicon solar cells was investigated: (1) the COMSAT MSD (multi-step diffused) cell, (2) the MinMIS cell, and (3) the MIND cell. A description of these solar cells is given along with drawings of their configurations. The diffusion length damage coefficients for the cells were calculated and presented. Solar cell spectral response was also discussed. Cells of the MinMIS type were judged to be unsuitable for use in the space radiation environment.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Space Photovoltaic Res. and Technol. 1983; p 74-80
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 63
    facet.materialart.
    Unknown
    Piecewise simulaton proton test of gallium arsenide and thin silicon solar cells (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Gallium Arsenide (GaAs) solar cells are viewed as a potential primary power source on certain future Earth orbiting satellites. However, the relative merits of gallium arsenide over silicon in a space radiation environment are largely unknown because a general degradation model for gallium arsenide does not exist. The results of a test simulating the proton radiation environment existing in a polar orbit and the concomitant effects on GaAs and thin silicon (Si) solar cells are presented. The objectives and methodology of the simulation test were discussed. The electrical characteristics of GaAs and Si solar cells are given in graph form. It was concluded that GaAs cells are viable for use on satellites in low Earth orbit.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 63-73
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 64
    facet.materialart.
    Unknown
    Solar cell degradation in proton radiation orbits (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Significant discrepancies have been observed between predicted and actual in-orbit silicon solar array degradation in orbits other than LEO (low Earth orbits) and GEO (geosynchronous orbit). These discrepancies have been diagnosed to arise probably from a combination of a lack of appropriate solar cell test data and from inadequacies in the models that relate the unidirectional and mono-energetic proton test data to the omnidirectional flux-energy spectra actually found in orbit. Relative damage coefficients and solar cell power outputs were discussed, and also were presented in graph form. Silicon and gallium arsenide solar cells were considered.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 49-55
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 65
    facet.materialart.
    Unknown
    Radiation testing of GaAs on CRRES and LIPS experiment (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The radiation damage of solar cells has become a prime concern to the U.S. Air Force due to longer satellite lifetime requirements. Flight experiments were undertaken on the Navy Living Plume Shield (LPS) satellite and the NASA/Air Force Combined Release and Radiation Effects Satellite (CRRES) to complement existing radiation testing. Each experiment, the rationale behind it, and its approach and status are presented. The effect of space radiation on gallium arsenide (GaAs) solar cells was the central parameter investigated. Specifications of the GaAs solar cells are given.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 41-48
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 66
    facet.materialart.
    Unknown
    Two-dimensional computer simulation of EMVJ and grating solar cells under AMO illumination (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A computer program, SCAP2D (Solar Cell Analysis Program in 2-Dimensions), is used to evaluate the Etched Multiple Vertical Junction (EMVJ) and grating solar cells. The aim is to demonstrate how SCAP2D can be used to evaluate cell designs. The cell designs studied are by no means optimal designs. The SCAP2D program solves the three coupled, nonlinear partial differential equations, Poisson's Equation and the hole and electron continuity equations, simultaneously in two-dimensions using finite differences to discretize the equations and Newton's Method to linearize them. The variables solved for are the electrostatic potential and the hole and electron concentrations. Each linear system of equations is solved directly by Gaussian Elimination. Convergence of the Newton Iteration is assumed when the largest correction to the electrostatic potential or hole or electron quasi-potential is less than some predetermined error. A typical problem involves 2000 nodes with a Jacobi matrix of order 6000 and a bandwidth of 243.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 34-40
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 67
    facet.materialart.
    Unknown
    Recent advances in LPE GaAs-based solar cells (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Several modifications were made to an infinite solution liquid phase epitaxy system that help fabricate both GaAs-based cells and thin cells that effectively reduce power-to-weight ratio for space applications. The most important development is the multiwell crucible for multilayer growth. Using a split crucible in one system, as many as five layers were grown in succession with varying Al levels and dopants. The structures grown were used to produce thin GaAs cells only 10 to 20 microns thick and also to grow cascade cell components. Results of these studies are presented and their applications to the future development of GaAs-based cells are discussed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 12-17
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 68
    facet.materialart.
    Unknown
    Structurally stable, thin silicon solar cells (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A fabrication process for structurally stable thin solar cell wafers that produce good power output after irradiation is described. The fabrication process is as follows. A 6 mil, circular wafer is oxidized on both sides. One side is then patterned with a rectangular array of holes in the oxide that are nominally 75 mils square and separated by 2 mil spacings. Wells are then etched into the silicon with KOH to a depth of 4 mils, leaving a 2 mil, unetched thickness. Two areas on the surface are left unetched to provide pads for bonding or testing. All oxide is then removed and the rest of the processing is normal; the unetched face is used as the illuminated face. When all other processing is complete, a 2 X 2 cm cell is sawed from the starting wafer leaving a border that is approximately 10 mils wide. The effective thickness, determined by weighing an unmetallized sample, of such a cell is about 2.4 mil.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 8-11
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 69
    facet.materialart.
    Unknown
    Computer simulation of the effects of transmission-averaging in microdensitometry (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: One of the principal advantages of electrography when compared to photography is the nearly linear relationship between source intensity versus resulting image density. This property allows for simplified and more accurate photometric calibration and permits a certain degree of extrapolation of the calibration to beyond the limits of the faintest photoelectric standard on an exposure. The desires to extract quantitative photometric information from electrographic (or photographic) negatives and to convert this information into a digital format for computer analysis or enhancement led to the widespread use of scanning microdensitometers to perform this A-to-D conversion. Therefore it is of vital importance to understand and, if practical, to avoid any nonlinearities which may be introduced during microdensitometry of electrographic emulsions.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 429-431
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 70
    facet.materialart.
    Unknown
    The role of the Automated Plate Measuring (APM) machine in developing a program to discover QSOs automatically (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The scanning of a direct plate with the automatic plate measuring machine which results in the automated selection and description of images is described. The selection of QSO candidates based on color-color diagrams constructed from the APM image data and the analysis of APM raster data for QSOs selected visually from objective prism plates are also discussed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 417-418
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 71
    facet.materialart.
    Unknown
    Next generation microdensitometer (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The fundamental limitations of microdensitometers are reviewed and the design of a high microdensitometer described. The system will digitize to 16 bits in transmission at a speed of 100 kHz using a laser beam moving over the emulsion. Other features are automatic platen rotation and autofocus. The cost will be of order $200,000.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 333-341
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 72
    facet.materialart.
    Unknown
    A new measuring machine in Paris (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A new photographic measuring machine is under construction at the Paris Observatory. The amount of transmitted light is measured by a linear array of 1024 photodiodes. Carriage control, data acquisition and on line processing are performed by microprocessors, a S.E.L. 32/27 computer, and an AP 120-B Array Processor. It is expected that a Schmidt telescope plate of size 360 mm square will be scanned in one hour with pixel size of ten microns.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 329-332
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 73
    facet.materialart.
    Unknown
    A preliminary analysis of a diode array for densitometry (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A diode-array based image digitizer manufactured by the Eikonix Corp. was tested to see if it can be adapted to the exacting requirements of astronomical densitometry. As the device is presently configured, a dynamic range of 400:1 can be achieved routinely, with a positional accuracy of 2 microns or better. An area of 2048 X 2048 pixels can be scanned in about 5 minutes. Preliminary tests indicate that several relatively simple enhancements can improve both the photometric and the positional accuracy of the device.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 307-315
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 74
    facet.materialart.
    Unknown
    A next generation microdensitometer? (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Motivations for construction of a next generation microdensitometer (NGM) are presented and their effect on the NGM design is discussed. A prototype of such an engine has been constructed at KPNO. Its design and performance is reviewed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 291-305
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 75
    facet.materialart.
    Unknown
    Why use a microdensitometer other than a PDS? (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The motivations for constructing a special purpose built microdensitometer are explored. The salient points of some of the microdensitometers are described and the advantages and disadvantages of the system in comparison to a PDS machine are outlined. The principal gain is in speed though at the expense of loss in dynamic range. The effects on the astronomical results are demonstrated. The astronomical results already obtained with these machines and from ongoing projects are described. It is shown that there is a large class of important astronomical problems which can be tackled by these machines but which are not feasibile on the PDS because of the speed of the machine.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 209-228
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 76
    facet.materialart.
    Unknown
    Improvements to the Photometric response and positional accuracy of the Yale PDS 2020G microdensitometer (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The necessity to incorporate several hardware changes to optimize the Yale PDS 2020G microdensitometer for photometric and astrometric research are discussed. The properties of a new high speed photometer and a positional calibration system are described. The new photometer incorporates a high speed logarithmic analog to digital converter with more than 10 times the resolution of the former system and a cycle time of approximately 50 usec. The positional calibration system monitors the drunkenness of the stages with respect to fixed index lines and enables the correction of the +/- 5 micro stage errors to an accuracy of better than 1 micro.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 151-161
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 77
    facet.materialart.
    Unknown
    Performance of the ESO PDS (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The astrometric and photometric performance of the PDS 1010A microdensitometer are discussed, including the tests used for checking it. The instrument was shown to satisfy operational requirements for photometric measurements of astronomical plates with respect to dynamic range and stability.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 89-95
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 78
    facet.materialart.
    Unknown
    Characteristics of the MSFC, PDS microdensitometer (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The results of several parametric studies carried out on the Marshall Space Flight Center (MSFC) Photometric Data System PDS-10 microdensitometer are summarized for the purposes of documenting the operation and limitations of the system for inhouse research and to provide a bench mark for comparison with other microdensitometers. The results are grouped into four general areas. These are: (1) system overall stability to drift, (2) photometric linearity and noise, (3) reproducibility, and (4) scanning performance. Test data taken in order to evaluate the interdependency of scan speed, noise and position are included. Shown also are results of tests for system stability, reproducibility, stray light and PMT settling time.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Marshall Space Flight Center Astron. Microdensitometry Conf.; p 71-88
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 79
    facet.materialart.
    Unknown
    Microdensitometer errors: Their effect on photometric data reduction (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The performance of densitometers used for photometric data reduction of high dynamic range electrographic plate material is analyzed. Densitometer repeatability is tested by comparing two scans of one plate. Internal densitometer errors are examined by constructing histograms of digitized densities and finding inoperative bits and differential nonlinearity in the analog to digital converter. Such problems appear common to the four densitometers used in this investigation and introduce systematic algorithm dependent errors in the results. Strategies to improve densitometer performance are suggested.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 45-58
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 80
    facet.materialart.
    Unknown
    Experiences with a PDS 2020 GM (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Various perturbations which occurred during the operation of a PDS 2020 GM microdensitometer are reviewed. The effects of elevated temperature, vibration, transient electrical noise, and photometric perturbations are briefly discussed. Sample astronomical results from the PDS 2020 GM unit are presented.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 97-106
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 81
    facet.materialart.
    Unknown
    Positive-feedback photometric drift in the PDS (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Digitizing flatfield images produces conditions in the Photometric Data System PDS which cause the measured density to drift by as much as .1 DN during a 10 minute interval. The drift occurs when the PDS, set up in equilibrium at fog level, subsequently scans a reasonably dense region for periods of longer than a few minutes. The drift is manifested primarily as a positive shift in density that is approximately the same for all densities. If the fog level is assumed to be in fact constant and is monitored during scans of flat fields, the PDS drift may be removed by subtracting the difference between the observed fog level and its assumed constant value for each pixel. This function is then smoothed and subtracted, as a function of scan line, from the measured density. The fog level is then adjusted to a standard value by adding a constant. The result is a flattened scan with PDS drift removed to the accuracy within which the fog level drift matches the drift at other levels.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Astron. Microdensitometry Conf.; p 59-69
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 82
    facet.materialart.
    Unknown
    Photometric and positional accuracy of the PDS Bonn in view of astronomical requirements (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The photometric and positional accuracy of a microdensitometer is examined. A calibrating plate with different density areas available is used to determine photometric accuracy. Position accuracy is evaluated by multiple scans of sharp edges and analyzed statistically.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 35-43
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 83
    facet.materialart.
    Unknown
    LDEF thermal measurements system (P0003) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Many of the passive experiments flying on LDEF will be significantly enhanced if data are available postflight to indicate the temperature time histories of test materials and other specimens exposed in the experiments. The baseline LDEF approach was to provide postflight calculated temperature histories of experiment boundaries and solar flux data for the mission, which can in turn be used by each investigator to calculate the temperature time histories for critical experiment components. Without in-flight temperature measurements, a substantial uncertainty will exist in the calculated temperatures. The data measured by the themal measurement system (THERM) will significantly improve postflight knowledge of temperatures experienced by LDEF experiments. The THERM data will also be valuable in validating the LDEF thermal design concept and in providing better design data for experimenters on future LDEF missions. The objectives of this experiment are to determine the history of the interior average temperatures of the LDEF for the total orbital mission and to measure the temperatures of selected components and thermal boundary conditions.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Long Duration Exposure Facility (LDEF); p 78-81
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 84
    facet.materialart.
    Unknown
    Advanced photovoltaic experiment (S0014) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The advanced photovoltaics-related experiments for investigating a portion of the solar spectrum and the effect of the space environment on photovoltaics. The information will be used to provide correlation between space and ground testing and also to provide for more accurate performance measurement in the laboratory. Specific objectives of these experiments are to provide information on the performance and endurance of advanced and conventional solar cells, to improve reference standards for photovoltaic measurements, and to measure the energy distribution in the extraterrestrial solar spectrum. Data to be obtained will include temperatures and short-circuit current of the samples. Six-point current-voltage (I-V) characteristics will be obtained for selected samples. These data will be recorded once a day during the flight. Orbit data will be correlated with preflight and postflight measurement of the samples.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 88-90
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 85
    facet.materialart.
    Unknown
    Determination of optimum sunlight concentration level in space for 3-5 cascade solar cells (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Current-voltage curves were calculated for each cell in a cascade structure using a solar cell diode equation and superposition. Terms for the light generated current, diffusion current, space charge recombination current and series and shunt resistance are included. Individual current voltage curves are added in series with ohmic resistance losses for the cell interconnects to obtain the cascade cell performance. Temperature was varied with concentration, using several models, and ranged from 55 C at one Sun to between 80 and 200 C at 100 Suns. A variety of series resistance and internal resistances were used. Coefficients of the diffusion and recombination terms are strongly temperature dependent. The study indicates that maximum efficiency (30%) occurs in the 50 to 100X Sun concentration range, provided series resistance is below 0.015 ohm-sq cm and cell temperature is 80 C at 100 Suns.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p 265-270
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 86
    facet.materialart.
    Unknown
    Effects of processing and dopant on radiation damage removal in silicon solar cells (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Gallium and boron doped silicon solar cells, processed by ion implantation followed by either laser or furnace anneal were irradiated by 1 MeV electrons and their postirradiation recovery by thermal annealing was determined. During the postirradiation anneal, gallium doped cells prepared by both processes recovered more rapidly and exhibited none of the severe reverse annealing observed for similarly processed 2 ohm-cm boron doped cells. Ion implanted furnace annealed 0.1 ohm-cm boron doped cells exhibited the lowest post-irradiation annealing temperatures after irradiation. The drastically lowered recovery temperature is attributed to the reduced oxygen and carbon content of the 0.1 ohm-cm cells. Analysis based on defect properties and annealing kinetics indicates that further reduction in annealing temperature is attainable with further reduction in the silicon's carbon and/or divacancy content after irradiation.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p 89-93
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 87
    facet.materialart.
    Unknown
    Power Sources Symposium, 31st, Atlantic City, NJ, June 11-14, 1984, Proceedings (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: The present conference on electrochemical power sources encompasses systems of such types as the thermoelectric, advanced rechargeable, lithium reserve, rechargeable, and nonrechargeable, nickel-cadmium and nickel-hydrogen rechargeable, lead-acid, nickel-zinc and nickel-iron rechargeable, nickel-cadmium and nickel-hydrogen rechargeable, and fuel cells. Attention is given to Si-Ge alloy multicouple technology, sodium-sulfur battery development status, the safety aspects of a rechargeable lithium C cell, fiber-structure electrodes for nickel-cadmium batteries, energy density improvements in Li/carbon monofluoride cells, zinc-air button cell technology, catalyzed cathodes for Li/SOCl2 cells, the effect of polymer structure on the rate capability of the lithium-iodine cell, and a methanol fuel cell powerplant.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 88
    facet.materialart.
    Unknown
    Heterodyne frequency measurements and frequency calibration standards for tunable diode lasers (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: New frequency calibration tables are required to keep abreast of the resolution attainable by currently available tunable lasers. One key to the generation of tables with requisite accuracy involves accurate heterodyne frequency measurements; another key consists of reliable fitting and analysis. Coordinated activity in NBS involves selection of suitable molecular calibration candidates, their frequency measurement and analysis, and dissemination of the results in the form of frequency calibration tables. Current status of these efforts is described.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 89
    facet.materialart.
    Unknown
    Optogalvanic photodetachment spectroscopy (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A new extension to optogalvanic spectroscopy, in which electrons detached from negative ions formed in the discharge are observed as a function of incident laser wavelength, has been developed. The determination of the electron affinities of I(-) and Cl(-) atomic ions is described. The potential of the technique for studying the spectroscopy of molecular negative ions is also discussed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Journal de Physique (ISSN 0449-1947); 44; C7-461 t
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 90
    facet.materialart.
    Unknown
    Reduction of flow-measurement uncertainties in laser velocimeters with nonorthogonal channels (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Previously cited in issue 5, p. 642, Accession no. A83-16486
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: AIAA Journal (ISSN 0001-1452); 22; 1115-112
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 91
    facet.materialart.
    Unknown
    Hydrogen from renewable energy - Photovoltaic/water electrolysis as an exemplary approach (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A feasibility study has been conducted for a NASA Kennedy Space Center liquid hydrogen/liquid oxygen production facility using solar cell arrays as the power source for electrolysis. The 100 MW output of the facility would be split into 67.6 and 32 MW portions for electrolysis and liquefaction, respectively. The solar cell array would cover 1.65 sq miles, and would be made up of 249 modular 400-kW arrays. Hydrogen and oxygen are generated at either dispersed or centralized water electrolyzers. The yearly hydrogen output is projected to be 5.76 million lbs, with 8 times that much oxygen; these fuel volumes can support approximately 18 Space Shuttle launches/year.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 92
    facet.materialart.
    Unknown
    Reflectance of metallic indium for solar energy applications (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: An investigation has been conducted in order to compile quantitative data on the reflective properties of metallic indium. The fabricated samples were of sufficiently high quality that differences from similar second-surface silvered mirrors were not apparent to the human eye. Three second-surface mirror samples were prepared by means of vacuum deposition techniques, yielding indium thicknesses of approximately 1000 A. Both hemispherical and specular measurements were made. It is concluded that metallic indium possesses a sufficiently high specular reflectance to be potentially useful in many solar energy applications.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Solar Energy (ISSN 0038-092X); 32; 2, 19; 311
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 93
    facet.materialart.
    Unknown
    Increased radiation resistance in lithium-counterdoped silicon solar cells (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Lithium-counterdoped n(+)p silicon solar cells are found to exhibit significantly increased radiation resistance to 1-MeV electron irradiation when compared to boron-doped n(+)p silicon solar cells. In addition to improved radiation resistance, considerable damage recovery by annealing is observed in the counterdoped cells at T less than or equal to 100 C. Deep level transient spectroscopy measurements are used to identify the defect whose removal results in the low-temperature aneal. It is suggested that the increased radiation resistance of the counterdoped cells is primarily due to interaction of the lithium with interstitial oxygen.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Applied Physics Letters (ISSN 0003-6951); 44; 1071-107
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 94
    facet.materialart.
    Unknown
    Sheet silicon cell/module technology (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The cost involved in the performance of the standard operations for the manufacture of silicon wafers is insignificant in the case of space photovoltaics applications. It is, however, a decisive factor with respect to terrestrial applications of silicon photovoltaic devices. In 1975, a program was, therefore, begun to develop low cost silicon solar arrays for terrestrial applications. The goal was silicon-based photovoltaic (PV) modules ready for installation at a selling price of $0.50/watt (1975 dollars). Sheet and ribbon silicon growth held out the promise of reduced cost through continuous operation, high material throughput, high material utilization efficiency, and a product whose shape lent itself to the assembly of high packing density modules. Attention is given to ribbon growth technologies, sheet technology generic problems, and ribbon cell and module technology status. It is concluded that the potential for crystalline ribbon silicon appears to be better today than ever before.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 95
    facet.materialart.
    Unknown
    Requirements for a passive IR advanced moisture and temperature sounder (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The design of a high spectral resolution, lambda/delta lambda being approximately 1200 IR, sounder capable of increasing the vertical resolution of atmospheric temperature profiles and achieving a rms accuracy of approximately 1.5 K is discussed. This sounder permits improved determination of meteorological parameters on cloudiness, surface temperature, and air-surface interactions. A set of channels from the high J lines in the R branch of the 4.3-micron CO2 band complemented by a larger set of window, humidity, and temperature channels in the 3.7-, 6.3-, 9-, and 15-micron regions is used. Design and simulation studies show that such a sounder is within the present state of the art.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics (ISSN 0003-6935); 23; 979-989
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 96
    facet.materialart.
    Unknown
    Solar disk sextant (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: This paper presents the conceptual design of an instrument, called the solar disk sextant, to be used in space to measure the shape and the size of the sun and their variations. The instrumental parameters required to produce sufficient sensitivity to address the problems of solar oblateness, solar pulsations, and global size changes of climatic importance are given.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics (ISSN 0003-6935); 23; 1235-123
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 97
    facet.materialart.
    Unknown
    Nd:YAG holographic interferometer for aerodynamic research (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A holographic interferometer system has been installed in the NASA Ames 2- by 2-Foot Transonic Wind Tunnel. The system incorporates a modern 10 pps, Nd:YAG pulsed laser which provides reliable operation and is easy to align. The spatial filtering requirements of the unstable resonator beam are described, as well as the integration of the system into the existing schlieren system. A two-plate holographic interferometer is used to reconstruct flow field data. For static wind tunnel models, the single exposure holograms are recorded in the usual manner; however, for dynamic models such as oscillating airfoils, synchronous laser hologram recording is used.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 98
    facet.materialart.
    Unknown
    A laser interferometer for measuring skin friction in three-dimensional flows (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Previously cited in issue 05, p. 643, Accession no. A83-16685
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: AIAA Journal (ISSN 0001-1452); 22; 557-559
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 99
    facet.materialart.
    Unknown
    Investigation of energy management strategies for photovoltaic systems - A predictive control algorithm (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The present investigation is concerned with the formulation of energy management strategies for stand-alone photovoltaic (PV) systems, taking into account a basic control algorithm for a possible predictive, (and adaptive) controller. The control system controls the flow of energy in the system according to the amount of energy available, and predicts the appropriate control set-points based on the energy (insolation) available by using an appropriate system model. Aspects of adaptation to the conditions of the system are also considered. Attention is given to a statistical analysis technique, the analysis inputs, the analysis procedure, and details regarding the basic control algorithm.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 100
    facet.materialart.
    Unknown
    Design, installation and operating experience of 20 photovoltaic medical refrigerator systems on four continents (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The NASA Lewis Research Center in cooperation with the World Health Organization, U.S.A. I.D., the Pan American Health Organization and national government agencies in some developing countries sponsored the installation of twenty photovoltaic powered medical vaccine storage refrigerator-freezer (R/F) systems. The Solar Power Corporation was selected as the contractor to perform the design, development and installation of these twenty units. Solar Power's experiences are described herein.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...