ALBERT — All Library Books, journals and Electronic Records Telegrafenberg

1

Unbekannt

Travel Time and Source Variation Explain the Molecular Transformation of Dissolved Organic Matter in an Alpine Stream Network (2020)

Peter, H. ; Singer, G. ; Ulseth, A. J. ; [weitere]

Wiley-Blackwell

In: EPIC3JGR Biogeosciences, Wiley-Blackwell, ISSN: 2169-8961

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2020-09-21

Beschreibung: Streams and rivers are important components of the carbon cycle as they transport and transform dissolved organic matter (DOM). Using high‐resolution Fourier‐transform ion cyclotron resonance mass spectrometry, we studied the spatial distribution of DOM at the molecular level at more than 100 sites across a stream network during summer and winter baseflow. We developed a model approximating the time DOM spent in the fluvial network, a key constraint on the biogeochemical processing of DOM. Discharge‐weighted travel time explained the compositional changes of DOM, which differed markedly in summer and winter. We attribute these seasonal differences to variation in source material, putatively reflecting the dynamics of freshly produced DOM in summer and DOM with an imprint of leaf litter in winter. Hydrological mixing was an important driver of the spatial dynamics of DOM. From the convergence rate of DOM compound intensities to the network‐wide average, we inferred the spatial distribution of sources within the catchment. Finally, we estimated network‐wide apparent mass transfer coefficients (vf app) of individual DOM compounds, which describe the vertical velocity at which DOM compounds are removed by biotic and abiotic processes. We identified the oxidative state of carbon as an important factor explaining vf app, which we consequently attribute to biological uptake of thermodynamically favorable DOM compounds. This work contributes to our understanding of the spatial processes, temporal constraints, and chemical properties of DOM that regulate the transformation and diagenesis of DOM at the fluvial network scale.

Repository-Name: EPIC Alfred Wegener Institut

Materialart: Article , isiRev

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

ARTIKEL (OA)

S·F·X

Volltext

2

Unbekannt

Facilitated crystal handling using a simple device for evaporation reduction in microtiter plates (2021)

Barthel, Tatjana ; Huschmann, Franziska U. ; Wallacher, Dirk ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-03-30

Beschreibung: In the past two decades, most of the steps in a macromolecular crystallography experiment have undergone tremendous development with respect to speed, feasibility and increase of throughput. The part of the experimental workflow that is still a bottleneck, despite significant efforts, involves the manipulation and harvesting of the crystals for the diffraction experiment. Here, a novel low‐cost device is presented that functions as a cover for 96‐well crystallization plates. This device enables access to the individual experiments one at a time by its movable parts, while minimizing evaporation of all other experiments of the plate. In initial tests, drops of many typically used crystallization cocktails could be successfully protected for up to 6 h. Therefore, the manipulation and harvesting of crystals is straightforward for the experimenter, enabling significantly higher throughput. This is useful for many macromolecular crystallography experiments, especially multi‐crystal screening campaigns.

Beschreibung: A simple and low‐cost device has been developed to minimize evaporation in microtiter plates for easy crystal handling and harvesting. image

Schlagwort(e): 548 ; evaporation reduction ; crystal handling ; crystal harvesting ; crystallographic fragment screening

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

3

Unbekannt

Cation distribution in Cu2ZnSnSe4, Cu2FeSnS4 and Cu2ZnSiSe4 by multiple‐edge anomalous diffraction (2021)

Többens, Daniel M. ; Gurieva, Galina ; Niedenzu, Sara ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-03-30

Beschreibung: Multiple‐Edge Anomalous Diffraction (MEAD) has been applied to various quaternary sulfosalts belonging to the adamantine compound family in order to validate the distribution of copper, zinc and iron cations in the structure. Semiconductors from this group of materials are promising candidates for photovoltaic applications. Their properties strongly depend on point defects, in particular related to cation order–disorder. However, Cu+, Zn2+ and Fe2+ have very similar scattering factors and are all but indistinguishable in usual X‐ray diffraction experiments. Anomalous diffraction utilizes the dependency of the atomic scattering factors f′ and f′′ of the energy of the radiation, especially close to the element‐specific absorption edges. In the MEAD technique, individual Bragg peaks are tracked over an absorption edge. The intensity changes depending on the structure factor can be highly characteristic for Miller indices selected for a specific structural problem, but require very exact measurements. Beamline KMC‐2 at synchrotron BESSY II, Berlin, has been recently upgraded for this technique. Anomalous X‐ray powder diffraction and XAFS compliment the data. Application of this technique confirmed established cation distribution in Cu2ZnSnSe4 (CZTSe) and Cu2FeSnS4 (CFTS). In contrast to the literature, cation distribution in Cu2ZnSiSe4 (CZSiSe) is shown to adopt a highly ordered wurtz‐kesterite structure type.

Beschreibung: Multiple‐Edge Anomalous Diffraction (MEAD) has been applied to various quaternary sulfosalts belonging to the adamantine compound family in order to validate the distribution of copper, zinc and iron cations in the structure. Application of this technique confirms established cation distribution in Cu2ZnSnSe4 (CZTSe) and Cu2FeSnS4 (CFTS), but in Cu2ZnSiSe4 (CZSiSe) the cation distribution is shown to adopt a highly ordered wurtz‐kesterite structure type in contrast to the literature. image

Schlagwort(e): 548 ; synchrotron ; anomalous diffraction ; semiconductor ; MEAD

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

4

Unbekannt

The copper(II)‐binding tripeptide GHK, a valuable crystallization and phasing tag for macromolecular crystallography (2021)

Mehr, Alexander ; Henneberg, Fabian ; Chari, Ashwin ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-03-27

Beschreibung: The growth of diffraction‐quality crystals and experimental phasing remain two of the main bottlenecks in protein crystallography. Here, the high‐affinity copper(II)‐binding tripeptide GHK was fused to the N‐terminus of a GFP variant and an MBP‐FG peptide fusion. The GHK tag promoted crystallization, with various residues (His, Asp, His/Pro) from symmetry molecules completing the copper(II) square‐pyramidal coordination sphere. Rapid structure determination by copper SAD phasing could be achieved, even at a very low Bijvoet ratio or after significant radiation damage. When collecting highly redundant data at a wavelength close to the copper absorption edge, residual S‐atom positions could also be located in log‐likelihood‐gradient maps and used to improve the phases. The GHK copper SAD method provides a convenient way of both crystallizing and phasing macromolecular structures, and will complement the current trend towards native sulfur SAD and MR‐SAD phasing.

Beschreibung: A novel three‐residue tag containing the residues GHK that can be used to promote crystallization and in SAD phasing experiments using its tightly bound copper ion is described. image

Schlagwort(e): 548 ; phasing ; crystallization ; GHK ; SAD

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

5

Unbekannt

Determining paracrystallinity in mixed‐tacticity polyhydroxybutyrates (2021)

Van Opdenbosch, Daniel ; Haslböck, Maria ; Zollfrank, Cordt

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-03-30

Beschreibung: Recently, the authors reported on the development of crystallinity in mixed‐tacticity polyhydroxybutyrates. Comparable values reported in the literature vary depending on the manner of determination, the discrepancies being partially attributable to scattering from paracrystalline portions of the material. These portions can be qualified by peak profile fitting or quantified by allocation of scattered X‐ray intensities. However, the latter requires a good quality of the former, which in turn must additionally account for peak broadening inherent in the measurement setup, and due to limited crystallite sizes and the possible presence of microstrain. Since broadening due to microstrain and paracrystalline order both scale with scattering vector, they are easily confounded. In this work, a method to directionally discern these two influences on the peak shape in a Rietveld refinement is presented. Allocating intensities to amorphous, bulk and paracrystalline portions with changing tactic disturbance provided internal validations of the obtained directional numbers. In addition, the correlation between obtained thermal factors and Young's moduli, determined in earlier work, is discussed.

Beschreibung: A method to robustly determine paracrystalline contents from Rietveld‐refined powder X‐ray data is presented and discussed for the example of mixed‐tacticity polyhydroxybutyrates. image

Schlagwort(e): 548 ; polyhydroxybutyrates ; mixed tacticity ; paracrystallinity ; Rietveld refinement ; thermal factors

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

6

Unbekannt

Concepts for nondestructive and depth‐resolved X‐ray residual stress analysis in the near‐surface region of nearly single crystalline materials with mosaic structure (2021)

Hollmann, Andreas ; Meixner, Matthias ; Klaus, Manuela ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-03-27

Beschreibung: Two evaluation concepts for nondestructive depth‐resolved X‐ray residual stress analysis in the near‐surface region of materials with cubic symmetry and nearly single crystalline structure are introduced by simulated examples. Both concepts are based on the same data acquisition strategy, which consists in the determination of lattice‐spacing depth profiles along the ⟨hkl⟩ poles by stepwise sample rotation around the scattering vector. Segmentation of these profiles parallel to the sample surface provides the lattice strain state as a function of depth. The first evaluation concept extends the crystallite group method developed for materials with pronounced crystallographic texture by the feature of depth resolution and can be applied to samples with arbitrary orientation. The second evaluation concept, which adapts the linear regression approach of the sin2ψ method for the case of single crystalline materials, is restricted to samples with (001) orientation. The influence of the strain‐free lattice parameter a0 on residual stress analysis using both evaluation concepts is discussed on the basis of explicitly derived relations.

Beschreibung: Two data evaluation concepts are proposed for nondestructive and depth‐resolved X‐ray residual stress analysis by means of energy‐dispersive diffraction on materials featuring cubic symmetry and a nearly single crystalline structure. image

Schlagwort(e): 548 ; residual stress ; X‐ray diffraction ; depth‐resolved analysis ; mosaic crystals

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

7

Unbekannt

X‐ray dichroism in polyimide caused by non‐resonant scattering (2021)

Schulze, K. S. ; Loetzsch, R. ; Rüffer, R. ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-03-30

Beschreibung: Dichroism is one of the most important optical effects in both the visible and the X‐ray range. Besides absorption, scattering can also contribute to dichroism. This paper demonstrates that, based on the example of polyimide, materials can show tiny dichroism even far from electronic resonances due to scattering. Although the effect is small, it can lead to a measurable polarization change and might have influence on highly sensitive polarimetric experiments.

Beschreibung: Aligned molecules, for example in polyimide foils, lead to small dichroism even far from resonances, which can be revealed by high‐precision X‐ray polarimetry. image

Schlagwort(e): 548 ; polyimide ; polarization ; X‐ray polarimetry ; wide‐angle scattering ; X‐ray dichroism

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

8

Unbekannt

Elastic stiffness coefficients of thiourea from thermal diffuse scattering (2021)

Büscher, Julia ; Mirone, Alessandro ; Stękiel, Michał ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-03-27

Beschreibung: The complete elastic stiffness tensor of thiourea has been determined from thermal diffuse scattering (TDS) using high‐energy photons (100 keV). Comparison with earlier data confirms a very good agreement of the tensor coefficients. In contrast with established methods to obtain elastic stiffness coefficients (e.g. Brillouin spectroscopy, inelastic X‐ray or neutron scattering, ultrasound spectroscopy), their determination from TDS is faster, does not require large samples or intricate sample preparation, and is applicable to opaque crystals. Using high‐energy photons extends the applicability of the TDS‐based approach to organic compounds which would suffer from radiation damage at lower photon energies.

Beschreibung: The elastic stiffness coefficients of thiourea are determined from thermal diffuse scattering. image

Schlagwort(e): 548 ; thermal diffuse scattering ; elastic stiffness ; thiourea

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

9

Unbekannt

Fast fitting of reflectivity data of growing thin films using neural networks (2021)

Greco, Alessandro ; Starostin, Vladimir ; Karapanagiotis, Christos ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-07-03

Beschreibung: X‐ray reflectivity (XRR) is a powerful and popular scattering technique that can give valuable insight into the growth behavior of thin films. This study shows how a simple artificial neural network model can be used to determine the thickness, roughness and density of thin films of different organic semiconductors [diindenoperylene, copper(II) phthalocyanine and α‐sexithiophene] on silica from their XRR data with millisecond computation time and with minimal user input or a priori knowledge. For a large experimental data set of 372 XRR curves, it is shown that a simple fully connected model can provide good results with a mean absolute percentage error of 8–18% when compared with the results obtained by a genetic least mean squares fit using the classical Parratt formalism. Furthermore, current drawbacks and prospects for improvement are discussed.

Beschreibung: Artificial neural networks trained with simulated data are shown to correctly and quickly determine film parameters from experimental X‐ray reflectivity curves.

Schlagwort(e): 548 ; X‐ray reflectivity ; machine learning ; organic semi‐conductors ; neural networks

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

10

Unbekannt

Numerically stable form factor of any polygon and polyhedron (2021)

Wuttke, Joachim

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-06-05

Beschreibung: Coordinate‐free expressions for the form factors of arbitrary polygons and polyhedra are derived using the divergence theorem and Stokes's theorem. Apparent singularities, all removable, are discussed in detail. Cancellation near the singularities causes a loss of precision that can be avoided by using series expansions. An important application domain is small‐angle scattering by nanocrystals.

Beschreibung: Coordinate‐free expressions for the form factors of arbitrary polygons and polyhedra are derived using the divergence theorem and Stokes's theorem. Series expansions are used to ensure numeric precision close to apparent singularities. image

Schlagwort(e): 548 ; form factors ; polyhedra ; Fourier shape transform

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

11

Unbekannt

ROBL‐II at ESRF: a synchrotron toolbox for actinide research (2021)

Scheinost, Andreas C. ; Claussner, Juergen ; Exner, Joerg ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-06-30

Beschreibung: ROBL‐II provides four different experimental stations to investigate actinide and other alpha‐ and beta‐emitting radionuclides at the new EBS storage ring of ESRF within an energy range of 3 to 35 keV. The XAFS station consists of a highly automatized, high sample throughput installation in a glovebox, to measure EXAFS and conventional XANES of samples routinely at temperatures down to 10 K, and with a detection limit in the sub‐p.p.m. range. The XES station with its five bent‐crystal analyzer, Johann‐type setup with Rowland circles of 1.0 and 0.5 m radii provides high‐energy resolution fluorescence detection (HERFD) for XANES, XES, and RIXS measurements, covering both actinide L and M edges together with other elements accessible in the 3 to 20 keV energy range. The six‐circle heavy duty goniometer of XRD‐1 is equipped for both high‐resolution powder diffraction as well as surface‐sensitive CTR and RAXR techniques. Single crystal diffraction, powder diffraction with high temporal resolution, as well as X‐ray tomography experiments can be performed at a Pilatus 2M detector stage (XRD‐2). Elaborate radioprotection features enable a safe and easy exchange of samples between the four different stations to allow the combination of several methods for an unprecedented level of information on radioactive samples for both fundamental and applied actinide and environmental research.

Beschreibung: ROBL‐II at ESRF provides four experimental stations to investigate actinides with X‐ray absorption and emission spectroscopy, and with surface, high‐resolution powder, and single‐crystal X‐ray diffractometry.

Schlagwort(e): 549 ; actinides ; EXAFS ; XANES ; HERFD‐XANES ; XAS ; XES ; RIXS ; XRD ; CTR ; RAXR ; surface diffraction

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

12

Unbekannt

ATSAS 3.0: expanded functionality and new tools for small‐angle scattering data analysis (2021)

Manalastas-Cantos, Karen ; Konarev, Petr V. ; Hajizadeh, Nelly R. ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-03-30

Beschreibung: The ATSAS software suite encompasses a number of programs for the processing, visualization, analysis and modelling of small‐angle scattering data, with a focus on the data measured from biological macromolecules. Here, new developments in the ATSAS 3.0 package are described. They include IMSIM, for simulating isotropic 2D scattering patterns; IMOP, to perform operations on 2D images and masks; DATRESAMPLE, a method for variance estimation of structural invariants through parametric resampling; DATFT, which computes the pair distance distribution function by a direct Fourier transform of the scattering data; PDDFFIT, to compute the scattering data from a pair distance distribution function, allowing comparison with the experimental data; a new module in DATMW for Bayesian consensus‐based concentration‐independent molecular weight estimation; DATMIF, an ab initio shape analysis method that optimizes the search model directly against the scattering data; DAMEMB, an application to set up the initial search volume for multiphase modelling of membrane proteins; ELLLIP, to perform quasi‐atomistic modelling of liposomes with elliptical shapes; NMATOR, which models conformational changes in nucleic acid structures through normal mode analysis in torsion angle space; DAMMIX, which reconstructs the shape of an unknown intermediate in an evolving system; and LIPMIX and BILMIX, for modelling multilamellar and asymmetric lipid vesicles, respectively. In addition, technical updates were deployed to facilitate maintainability of the package, which include porting the PRIMUS graphical interface to Qt5, updating SASpy – a PyMOL plugin to run a subset of ATSAS tools – to be both Python 2 and 3 compatible, and adding utilities to facilitate mmCIF compatibility in future ATSAS releases. All these features are implemented in ATSAS 3.0, freely available for academic users at https://www.embl‐hamburg.de/biosaxs/software.html.

Beschreibung: ATSAS is a comprehensive software suite for the processing, visualization, analysis and modelling of small‐angle scattering data. This article describes developments in the ATSAS 3.0 release, including new programs for data simulation and for the structural modelling of lipids, nucleic acids and polydisperse systems. image

Schlagwort(e): 548 ; small‐angle scattering ; data analysis ; biological macromolecules ; structural modelling ; ATSAS

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

13

Unbekannt

XGANDALF – extended gradient descent algorithm for lattice finding (2021)

Gevorkov, Yaroslav ; Yefanov, Oleksandr ; Barty, Anton ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-03-27

Beschreibung: Serial crystallography records still diffraction patterns from single, randomly oriented crystals, then merges data from hundreds or thousands of them to form a complete data set. To process the data, the diffraction patterns must first be indexed, equivalent to determining the orientation of each crystal. A novel automatic indexing algorithm is presented, which in tests usually gives significantly higher indexing rates than alternative programs currently available for this task. The algorithm does not require prior knowledge of the lattice parameters but can make use of that information if provided, and also allows indexing of diffraction patterns generated by several crystals in the beam. Cases with a small number of Bragg spots per pattern appear to particularly benefit from the new approach. The algorithm has been implemented and optimized for fast execution, making it suitable for real‐time feedback during serial crystallography experiments. It is implemented in an open‐source C++ library and distributed under the LGPLv3 licence. An interface to it has been added to the CrystFEL software suite.

Beschreibung: A description and evaluation are given of XGANDALF, extended gradient descent algorithm for lattice finding, an algorithm developed for fast and accurate indexing of snapshot diffraction patterns. image

Schlagwort(e): 548 ; indexing ; XGANDALF ; CrystFEL ; multiple lattices ; serial crystallography

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

14

Unbekannt

pinkIndexer – a universal indexer for pink‐beam X‐ray and electron diffraction snapshots (2021)

Gevorkov, Yaroslav ; Barty, Anton ; Brehm, Wolfgang ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-03-27

Beschreibung: A crystallographic indexing algorithm, pinkIndexer, is presented for the analysis of snapshot diffraction patterns. It can be used in a variety of contexts including measurements made with a monochromatic radiation source, a polychromatic source or with radiation of very short wavelength. As such, the algorithm is particularly suited to automated data processing for two emerging measurement techniques for macromolecular structure determination: serial pink‐beam X‐ray crystallography and serial electron crystallography, which until now lacked reliable programs for analyzing many individual diffraction patterns from crystals of uncorrelated orientation. The algorithm requires approximate knowledge of the unit‐cell parameters of the crystal, but not the wavelengths associated with each Bragg spot. The use of pinkIndexer is demonstrated by obtaining 1005 lattices from a published pink‐beam serial crystallography data set that had previously yielded 140 indexed lattices. Additionally, in tests on experimental serial crystallography diffraction data recorded with quasi‐monochromatic X‐rays and with electrons the algorithm indexed more patterns than other programs tested.

Beschreibung: pinkIndexer, an algorithm developed for indexing of snapshot diffraction patterns recorded with pink‐beam X‐rays, monochromatic X‐rays and electrons, is described and its use evaluated. image

Schlagwort(e): 548 ; indexing ; pinkIndexer ; CrystFEL ; pink X‐ray beam ; serial electron diffraction

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

15

Unbekannt

Crystal structure of human CRM1, covalently modified by 2‐mercaptoethanol on Cys528, in complex with RanGTP (2021)

Shaikhqasem, Alaa ; Schmitt, Kerstin ; Valerius, Oliver ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-06-17

Beschreibung: CRM1 is a nuclear export receptor that has been intensively targeted over the last decade for the development of antitumor and antiviral drugs. Structural analysis of several inhibitor compounds bound to CRM1 revealed that their mechanism of action relies on the covalent modification of a critical cysteine residue (Cys528 in the human receptor) located in the nuclear export signal‐binding cleft. This study presents the crystal structure of human CRM1, covalently modified by 2‐mercaptoethanol on Cys528, in complex with RanGTP at 2.58 Å resolution. The results demonstrate that buffer components can interfere with the characterization of cysteine‐dependent inhibitor compounds.

Beschreibung: The covalent modification of human CRM1 by 2‐mercaptoethanol interferes with the characterization of cysteine‐dependent inhibitor compounds. image

Schlagwort(e): 548 ; nuclear export ; cancer ; exportin 1 ; cysteine modification

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

16

Unbekannt

Staircase array of inclined refractive multi‐lenses for large field of view pixel super‐resolution scanning transmission hard X‐ray microscopy (2021)

Mamyrbayev, Talgat ; Ikematsu, Katsumasa ; Takano, Hidekazu ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-06-26

Beschreibung: Owing to the development of X‐ray focusing optics during the past decades, synchrotron‐based X‐ray microscopy techniques allow the study of specimens with unprecedented spatial resolution, down to 10 nm, using soft and medium X‐ray photon energies, though at the expense of the field of view (FOV). One of the approaches to increase the FOV to square millimetres is raster‐scanning of the specimen using a single nanoprobe; however, this results in a long data acquisition time. This work employs an array of inclined biconcave parabolic refractive multi‐lenses (RMLs), fabricated by deep X‐ray lithography and electroplating to generate a large number of long X‐ray foci. Since the FOV is limited by the pattern height if a single RML is used by impinging X‐rays parallel to the substrate, many RMLs at regular intervals in the orthogonal direction were fabricated by tilted exposure. By inclining the substrate correspondingly to the tilted exposure, 378000 X‐ray line foci were generated with a length in the centimetre range and constant intervals in the sub‐micrometre range. The capability of this new X‐ray focusing device was first confirmed using ray‐tracing simulations and then using synchrotron radiation at BL20B2 of SPring‐8, Japan. Taking account of the fact that the refractive lens is effective for focusing high‐energy X‐rays, the experiment was performed with 35 keV X‐rays. Next, by scanning a specimen through the line foci, this device was used to perform large FOV pixel super‐resolution scanning transmission hard X‐ray microscopy (PSR‐STHXM) with a 780 ± 40 nm spatial resolution within an FOV of 1.64 cm × 1.64 cm (limited by the detector area) and a total scanning time of 4 min. Biomedical implant abutments fabricated via selective laser melting using Ti–6Al–4V medical alloy were measured by PSR‐STHXM, suggesting its unique potential for studying extended and thick specimens. Although the super‐resolution function was realized in one dimension in this study, it can be expanded to two dimensions by aligning a pair of presented devices orthogonally.

Beschreibung: A new X‐ray focusing device generates hundreds of thousands of line foci, periodically spaced in the sub‐micrometre range, with centimetre length. It enables to achieve large FOV pixel super‐resolution scanning transmission hard X‐ray microscopy. image

Schlagwort(e): 502.82 ; inclined refractive X‐ray multi‐lens array ; pixel super‐resolution ; scanning transmission hard X‐ray microscopy ; deep X‐ray lithography and electroplating

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

17

Unbekannt

A new concept for temporal gating of synchrotron X‐ray pulses (2021)

Schmidt, D. ; Bauer, R. ; Chung, S. ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-07-02

Beschreibung: A new concept for temporal gating of synchrotron X‐ray pulses based on laser‐induced thermal transient gratings is presented. First experimental tests of the concept yield a diffraction efficiency of 0.18%; however, the calculations indicate a theoretical efficiency and contrast of 〉30% and 10−5, respectively. The full efficiency of the pulse picker has not been reached yet due to a long‐range thermal deformation of the sample after absorption of the excitation laser. This method can be implemented in a broad spectral range (100 eV to 20 keV) and is only minimally invasive to an existing setup.

Beschreibung: A new concept for temporal gating of synchrotron X‐ray pulses based on laser‐induced thermal transient gratings is presented.

Schlagwort(e): 548 ; synchrotron ; time‐resolved ; thermal deformation ; transient grating ; pulse picking

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

18

Unbekannt

The time‐resolved hard X‐ray diffraction endstation KMC‐3 XPP at BESSY II (2021)

Rössle, Matthias ; Leitenberger, Wolfram ; Reinhardt, Matthias ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-06-06

Beschreibung: The time‐resolved hard X‐ray diffraction endstation KMC‐3 XPP for optical pump/X‐ray probe experiments at the electron storage ring BESSY II is dedicated to investigating the structural response of thin film samples and heterostructures after their excitation with ultrashort laser pulses and/or electric field pulses. It enables experiments with access to symmetric and asymmetric Bragg reflections via a four‐circle diffractometer and it is possible to keep the sample in high vacuum and vary the sample temperature between ∼15 K and 350 K. The femtosecond laser system permanently installed at the beamline allows for optical excitation of the sample at 1028 nm. A non‐linear optical setup enables the sample excitation also at 514 nm and 343 nm. A time‐resolution of 17 ps is achieved with the `low‐α' operation mode of the storage ring and an electronic variation of the delay between optical pump and hard X‐ray probe pulse conveniently accesses picosecond to microsecond timescales. Direct time‐resolved detection of the diffracted hard X‐ray synchrotron pulses use a gated area pixel detector or a fast point detector in single photon counting mode. The range of experiments that are reliably conducted at the endstation and that detect structural dynamics of samples excited by laser pulses or electric fields are presented.

Beschreibung: The KMC‐3 XPP endstation of the synchrotron BESSY II is dedicated to time‐resolved studies of structural dynamics of matter upon optical and/or electrical excitation using hard X‐ray diffraction with an accessible time range from 17 ps to several microseconds. image

Schlagwort(e): 548 ; beamline instrumentation ; time‐resolved X‐ray diffraction ; optical excitation ; thermal transport ; ferroelectric switching

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

19

Unbekannt

Disordered sodium alkoxides from powder data: crystal structures of sodium ethoxide, propoxide, butoxide and pentoxide, and some of their solvates (2021)

Beske, Maurice ; Cronje, Stephanie ; Schmidt, Martin U. ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-03-27

Beschreibung: The crystal structures of sodium ethoxide (sodium ethanolate, NaOEt), sodium n‐propoxide (sodium n‐propanolate, NaOnPr), sodium n‐butoxide (sodium n‐butanolate, NaOnBu) and sodium n‐pentoxide (sodium n‐amylate, NaOnAm) were determined from powder X‐ray diffraction data. NaOEt crystallizes in space group P421m, with Z = 2, and the other alkoxides crystallize in P4/nmm, with Z = 2. To resolve space‐group ambiguities, a Bärnighausen tree was set up, and Rietveld refinements were performed with different models. In all structures, the Na and O atoms form a quadratic net, with the alkyl groups pointing outwards on both sides (anti‐PbO type). The alkyl groups are disordered. The disorder becomes even more pronounced with increasing chain length. Recrystallization from the corresponding alcohols yielded four sodium alkoxide solvates: sodium ethoxide ethanol disolvate (NaOEt·2EtOH), sodium n‐propoxide n‐propanol disolvate (NaOnPr·2nPrOH), sodium isopropoxide isopropanol pentasolvate (NaOiPr·5iPrOH) and sodium tert‐amylate tert‐amyl alcohol monosolvate (NaOtAm·tAmOH, tAm = 2‐methyl‐2‐butyl). Their crystal structures were determined by single‐crystal X‐ray diffraction. All these solvates form chain structures consisting of Na+, –O− and –OH groups, encased by alkyl groups. The hydrogen‐bond networks diverge widely among the solvate structures. The hydrogen‐bond topology of the iPrOH network in NaOiPr·5iPrOH shows branched hydrogen bonds and differs considerably from the networks in pure crystalline iPrOH.

Beschreibung: The crystal structures of NaOEt, NaOPr, NaOBu and NaOAm (Am = amyl = pentyl) were determined from powder data. These compounds crystallize in an anti‐PbO structure in the space groups P21m and P4/nmm. Additionally, solvates with the composition NaOEt·2EtOH, NaOPr·2PrOH, NaOiPr·5iPrOH and NaOtAm·tAmOH were synthesized, and their structures were determined from single crystals. They form interesting chain structures of different compositions and topologies. image

Schlagwort(e): 548 ; sodium alkoxide ; powder data ; solvate ; isopropanol ; Bärnighausen tree ; PXRD

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

20

Unbekannt

Small‐angle X‐ray scattering from GaN nanowires on Si(111): facet truncation rods, facet roughness and Porod's law (2021)

Kaganer, Vladimir M. ; Konovalov, Oleg V. ; Fernández-Garrido, Sergio

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-03-27

Beschreibung: Small‐angle X‐ray scattering from GaN nanowires grown on Si(111) is measured in the grazing‐incidence geometry and modelled by means of a Monte Carlo simulation that takes into account the orientational distribution of the faceted nanowires and the roughness of their side facets. It is found that the scattering intensity at large wavevectors does not follow Porod's law I(q) ∝ q−4. The intensity depends on the orientation of the side facets with respect to the incident X‐ray beam. It is maximum when the scattering vector is directed along a facet normal, reminiscent of surface truncation rod scattering. At large wavevectors q, the scattering intensity is reduced by surface roughness. A root‐mean‐square roughness of 0.9 nm, which is the height of just 3–4 atomic steps per micrometre‐long facet, already gives rise to a strong intensity reduction.

Beschreibung: The intensity of small‐angle X‐ray scattering from GaN nanowires on Si(111) depends on the orientation of the side facets with respect to the incident beam. This reminiscence of truncation rod scattering gives rise to a deviation from Porod's law. A roughness of just 3–4 atomic steps per micrometre‐long side facet notably changes the intensity curves. image

Schlagwort(e): 548 ; nanowires ; Porod's law ; facet truncation rods ; small‐angle X‐ray scattering ; SAXS ; grazing‐incidence small‐angle X‐ray scattering ; GISAXS

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

21

Unbekannt

The accuracy of protein models automatically built into cryo‐EM maps with ARP/wARP (2021)

Chojnowski, Grzegorz ; Sobolev, Egor ; Heuser, Philipp ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-06-28

Beschreibung: Recent developments in cryogenic electron microscopy (cryo‐EM) have enabled structural studies of large macromolecular complexes at resolutions previously only attainable using macromolecular crystallography. Although a number of methods can already assist in de novo building of models into high‐resolution cryo‐EM maps, automated and reliable map interpretation remains a challenge. Presented here is a systematic study of the accuracy of models built into cryo‐EM maps using ARP/wARP. It is demonstrated that the local resolution is a good indicator of map interpretability, and for the majority of the test cases ARP/wARP correctly builds 90% of main‐chain fragments in regions where the local resolution is 4.0 Å or better. It is also demonstrated that the coordinate accuracy for models built into cryo‐EM maps is comparable to that of X‐ray crystallographic models at similar local cryo‐EM and crystallographic resolutions. The model accuracy also correlates with the refined atomic displacement parameters.

Schlagwort(e): 548 ; ARP/wARP ; model building ; cryo‐EM ; model accuracy ; sequence assignment

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

22

Unbekannt

Synthesis, crystal structure and structure–property relations of strontium orthocarbonate, Sr2CO4 (2021)

Laniel, Dominique ; Binck, Jannes ; Winkler, Björn ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-06-05

Beschreibung: Carbonates containing CO4 groups as building blocks have recently been discovered. A new orthocarbonate, Sr2CO4 is synthesized at 92 GPa and at a temperature of 2500 K. Its crystal structure was determined by in situ synchrotron single‐crystal X‐ray diffraction, selecting a grain from a polycrystalline sample. Strontium orthocarbonate crystallizes in the orthorhombic crystal system (space group Pnma) with CO4, SrO9 and SrO11 polyhedra as the main building blocks. It is isostructural to Ca2CO4. DFT calculations reproduce the experimental findings very well and have, therefore, been used to predict the equation of state, Raman and IR spectra, and to assist in the discussion of bonding in this compound.

Beschreibung: A new orthocarbonate, Sr2CO4, was synthesized under extreme pressure and temperature conditions of 92 GPa and 2500 K, respectively. The crystal structure of the compound s fully characterized in situ by synchrotron single‐crystal X‐ray diffraction and DFT calculations were employed to provide insight into its equation of state, Raman and IR spectra, and bonding. image

Schlagwort(e): 548 ; orthocarbonates ; crystal structure ; single‐crystal X‐ray diffraction ; high pressure ; Sr2CO4

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

23

Unbekannt

Anomalous SAXS at P12 beamline EMBL Hamburg: instrumentation and applications (2021)

Gruzinov, Andrey Yu. ; Schroer, Martin A. ; Manalastas-Cantos, Karen ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-06-28

Beschreibung: Small‐angle X‐ray scattering (SAXS) is an established method for studying nanostructured systems and in particular biological macromolecules in solution. To obtain element‐specific information about the sample, anomalous SAXS (ASAXS) exploits changes of the scattering properties of selected atoms when the energy of the incident X‐rays is close to the binding energy of their electrons. While ASAXS is widely applied to condensed matter and inorganic systems, its use for biological macromolecules is challenging because of the weak anomalous effect. Biological objects are often only available in small quantities and are prone to radiation damage, which makes biological ASAXS measurements very challenging. The BioSAXS beamline P12 operated by the European Molecular Biology Laboratory (EMBL) at the PETRA III storage ring (DESY, Hamburg) is dedicated to studies of weakly scattering objects. Here, recent developments at P12 allowing for ASAXS measurements are presented. The beamline control, data acquisition and data reduction pipeline of the beamline were adapted to conduct ASAXS experiments. Modelling tools were developed to compute ASAXS patterns from atomic models, which can be used to analyze the data and to help designing appropriate data collection strategies. These developments are illustrated with ASAXS experiments on different model systems performed at the P12 beamline.

Schlagwort(e): 548 ; ASAXS ; biological SAXS ; metalloproteins ; gold nanoparticles ; anomalous scattering ; beamline development

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

24

Unbekannt

Symmetry relations in wurtzite nitrides and oxide nitrides and the curious case of Pmc21 (2021)

Breternitz, Joachim ; Schorr, Susan

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-06-27

Beschreibung: Binary III–V nitrides such as AlN, GaN and InN in the wurtzite‐type structure have long been considered as potent semiconducting materials because of their optoelectronic properties, amongst others. With rising concerns over the utilization of scarce elements, a replacement of the trivalent cations by others in ternary and multinary nitrides has led to the development of different variants of nitrides and oxide nitrides crystallizing in lower‐symmetry variants of wurtzite. This work presents the symmetry relationships between these structural types specific to nitrides and oxide nitrides and updates some prior work on this matter. The non‐existence of compounds crystallizing in Pmc21, formally the highest subgroup of the wurtzite type fulfilling Pauling's rules for 1:1:2 stoichiometries, has been puzzling scientists for a while; a rationalization is given, from a crystallographic basis, of why this space group is unlikely to be adopted.

Schlagwort(e): 548 ; group–subgroup relationships ; nitride materials ; wurtzite type

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

25

Unbekannt

Comparison and evaluation of pair distribution functions, using a similarity measure based on cross‐correlation functions (2021)

Habermehl, Stefan ; Schlesinger, Carina ; Prill, Dragica

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-06-20

Beschreibung: An approach for the comparison of pair distribution functions (PDFs) has been developed using a similarity measure based on cross‐correlation functions. The PDF is very sensitive to changes in the local structure, i.e. small deviations in the structure can cause large signal shifts and significant discrepancies between the PDFs. Therefore, a comparison based on pointwise differences (e.g. R values and difference curves) may lead to the assumption that the investigated PDFs as well as the corresponding structural models are not in agreement at all, whereas a careful visual inspection of the investigated structural models and corresponding PDFs may reveal a relatively good match. To quantify the agreement of different PDFs for those cases an alternative approach is introduced: the similarity measure based on cross‐correlation functions. In this paper, the power of this application of the similarity measure to the analysis of PDFs is highlighted. The similarity measure is compared with the classical Rwp values as representative of the comparison based on pointwise differences as well as with the Pearson product‐moment correlation coefficient, using polymorph IV of barbituric acid as an example.

Beschreibung: A novel approach to the quantification of the agreement between pair distribution functions by a similarity measure based on cross‐correlation functions is introduced and evaluated. image

Schlagwort(e): 548 ; pair distribution functions ; similarity measures ; total scattering techniques ; cross‐correlation functions ; R values

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

26

Unbekannt

Novel experimental setup for megahertz X‐ray diffraction in a diamond anvil cell at the High Energy Density (HED) instrument of the European X‐ray Free‐Electron Laser (EuXFEL) (2021)

Liermann, H. P. ; Konôpková, Z. ; Appel, K. ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-06-26

Beschreibung: The high‐precision X‐ray diffraction setup for work with diamond anvil cells (DACs) in interaction chamber 2 (IC2) of the High Energy Density instrument of the European X‐ray Free‐Electron Laser is described. This includes beamline optics, sample positioning and detector systems located in the multipurpose vacuum chamber. Concepts for pump–probe X‐ray diffraction experiments in the DAC are described and their implementation demonstrated during the First User Community Assisted Commissioning experiment. X‐ray heating and diffraction of Bi under pressure, obtained using 20 fs X‐ray pulses at 17.8 keV and 2.2 MHz repetition, is illustrated through splitting of diffraction peaks, and interpreted employing finite element modeling of the sample chamber in the DAC.

Beschreibung: The high‐precision X‐ray diffraction (XRD) setup for work with diamond anvil cells (DACs) in Interaction Chamber 2 of the High Energy Density (HED) instrument of the European X‐ray Free‐Electron Laser is described. image

Schlagwort(e): 548 ; diamond anvil cells ; X‐ray free‐electron lasers ; high‐precision X‐ray diffraction ; finite element modeling

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

27

Unbekannt

The anisotropy in the optical constants of quartz crystals for soft X‐rays (2021)

Andrle, A. ; Hönicke, P. ; Vinson, J. ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-06-26

Beschreibung: The refractive index of a y‐cut SiO2 crystal surface is reconstructed from orientation‐dependent soft X‐ray reflectometry measurements in the energy range from 45 to 620 eV. Owing to the anisotropy of the crystal structure in the (100) and (001) directions, a significant deviation of the measured reflectance at the Si L2,3 and O K absorption edges is observed. The anisotropy in the optical constants reconstructed from these data is also confirmed by ab initio Bethe–Salpeter equation calculations for the O K edge. This new experimental data set expands the existing literature data for quartz crystal optical constants significantly, particularly in the near‐edge regions.

Beschreibung: The refractive index of a y‐cut SiO2 crystal surface is reconstructed from polarization‐dependent soft X‐ray reflectometry measurements in the energy range from 45 to 620 eV. The reconstructed anisotropy in the optical constants is also confirmed by ab initio Bethe–Salpeter equation calculations of the O K edge. image

Schlagwort(e): 548 ; optical constants ; quartz ; anisotropy ; soft X‐ray reflectometry

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

28

Unbekannt

Unravelling the crystal structure of Nd5.8WO12−δ and Nd5.7W0.75Mo0.25O12−δ mixed ionic electronic conductors (2021)

Scherb, Tobias ; Fantin, Andrea ; Checchia, Stefano ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-07-05

Beschreibung: Mixed ionic electronic conducting ceramics Nd6−yWO12−δ (δ is the oxygen deficiency) provide excellent stability in harsh environments containing strongly reactive gases such as CO2, CO, H2, H2O or H2S. Due to this chemical stability, they are promising and cost‐efficient candidate materials for gas separation, catalytic membrane reactors and protonic ceramic fuel cell technologies. As in La6−yWO12−δ, the ionic/electronic transport mechanism in Nd6−yWO12−δ is expected to be largely controlled by the crystal structure, the conclusive determination of which is still lacking. This work presents a crystallographic study of Nd5.8WO12−δ and molybdenum‐substituted Nd5.7W0.75Mo0.25O12−δ prepared by the citrate complexation route. High‐resolution synchrotron and neutron powder diffraction data were used in combined Rietveld refinements to unravel the crystal structure of Nd5.8WO12−δ and Nd5.7W0.75Mo0.25O12−δ. Both investigated samples crystallize in a defect fluorite crystal structure with space group Fm3m and doubled unit‐cell parameter due to cation ordering. Mo replaces W at both Wyckoff sites 4a and 48h and is evenly distributed, in contrast with La6−yWO12−δ. X‐ray absorption spectroscopy as a function of partial pressure pO2 in the near‐edge regions excludes oxidation state changes of Nd (Nd3+) and W (W6+) in reducing conditions: the enhanced hydrogen permeation, i.e. ambipolar conduction, observed in Mo‐substituted Nd6−yWO12−δ is therefore explained by the higher Mo reducibility and the creation of additional – disordered – oxygen vacancies.

Beschreibung: The crystal structures of non‐substituted and Mo‐substituted neodymium tungstates are described in detail through neutron diffraction and high‐resolution X‐ray diffraction. Combined X‐ray and neutron diffraction refinements and electron probe micro‐analysis were employed to locate Mo atoms in the crystal structure of Nd6−yW1−zMozO12−δ (z = 0, 0.25), while X‐ray absorption spectroscopy in the near‐edge regions confirmed no changes in the oxidation states of Nd and W.

Schlagwort(e): 548 ; powder diffraction ; mixed conductors ; X‐ray absorption spectroscopy (XAS) ; Nd6−yWO12−δ

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

29

Unbekannt

High‐temperature treatments of niobium under high vacuum, dilute air‐ and nitrogen‐atmospheres as investigated by in situ X‐ray absorption spectroscopy (2021)

Klaes, Jonas ; Rothweiler, Patrick ; Bornmann, Benjamin ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-06-30

Beschreibung: Niobium metal foils were heat‐treated at 900°C under different conditions and in situ investigated with time‐resolved X‐ray absorption fine‐structure (EXAFS and XANES) measurements. The present study aims to mimic the conditions usually applied for heat treatments of Nb materials used for superconducting radiofrequency cavities, in order to better understand the evolving processes during vacuum annealing as well as for heat treatments in controlled dilute gases. Annealing in vacuum in a commercially available cell showed a substantial amount of oxidation, so that a designated new cell was designed and realized, allowing treatments under clean high‐vacuum conditions as well as under well controllable gas atmospheres. The experiments performed under vacuum demonstrated that the original structure of the Nb foils is preserved, while a detailed evaluation of the X‐ray absorption fine‐structure data acquired during treatments in dilute air atmospheres (10−5 mbar to 10−3 mbar) revealed a linear oxidation with the time of the treatment, and an oxidation rate proportional to the oxygen (air) pressure. The structure of the oxide appears to be very similar to that of polycrystalline NbO. The cell also permits controlled exposures to other reactive gases at elevated temperatures; here the Nb foils were exposed to dilute nitrogen atmospheres after a pre‐conditioning of the studied Nb material for one hour under high‐vacuum conditions, in order to imitate typical conditions used for nitrogen doping of cavity materials. Clear structural changes induced by the N2 exposure were found; however, no evidence for the formation of niobium nitride could be derived from the EXAFS and XANES experiments. The presented results establish the feasibility to study the structural changes of the Nb materials in situ during heat treatments in reactive gases with temporal resolution, which are important to better understand the underlaying mechanisms and the dynamics of phase formation during those heat treatments in more detail.

Schlagwort(e): 548 ; in situ EXAFS ; high temperature ; time‐resolved EXAFS ; niobium

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

30

Unbekannt

Pressure‐induced Pb–Pb bonding and phase transition in Pb2SnO4 (2021)

Spahr, Dominik ; Stękiel, Michał ; Zimmer, Dominik ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-03-27

Beschreibung: High‐pressure single‐crystal to 20 GPa and powder diffraction measurements to 50 GPa, show that the structure of Pb2SnO4 strongly distorts on compression with an elongation of one axis. A structural phase transition occurs between 10 GPa and 12 GPa, with a change of space group from Pbam to Pnam. The resistivity decreases by more than six orders of magnitude when pressure is increased from ambient conditions to 50 GPa. This insulator‐to‐semiconductor transition is accompanied by a reversible appearance change from transparent to opaque. Density functional theory‐based calculations show that at ambient conditions the channels in the structure host the stereochemically‐active Pb 6s2 lone electron pairs. On compression the lone electron pairs form bonds between Pb2+ ions. Also provided is an assignment of irreducible representations to the experimentally observed Raman bands.

Beschreibung: The structure of Pb2SnO4 is found to strongly distort on compression and a structural phase transition with a change of space group from Pbam to Pnam occurs at ∼11 GPa. Our complementary DFT‐based calculations show that at ambient conditions, the channels in the structure host the stereochemically active Pb 6s2 lone electron pairs which form bonds between the Pb2+ ions with increasing pressure. image

Schlagwort(e): 548 ; lead stannate (Pb2SnO4) ; density functional theory ; high‐pressure X‐ray diffraction ; pressure‐induced phase transition ; insulator–semiconductor transition

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

31

Unbekannt

A discussion on `Domain formation and phase transitions in the wurtzite‐based heterovalent ternaries: a Landau theory analysis' (2021)

Quayle, Paul C. ; Breternitz, Joachim

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-06-05

Beschreibung: Heterovalent ternary nitrides are considered one of the promising classes of materials for photovoltaics, combining attractive physical properties with low toxicity and element abundance. One of the front‐runner systems under consideration is ZnSnN2. Although it is nominally a ternary compound, no clear crystallographic evidence for cation ordering has been observed so far. An attempt to elucidate this discrepancy [Quayle (2020). Acta Cryst. A76, 410–420] was the trigger for an intensive discussion between the authors, and an agreement was reached to elaborate on some points in order to set things in perspective. Rather than using a conventional comment–answer scheme, this is published in the form of a joint discussion to celebrate constructive criticism and collegiality.

Beschreibung: A scientific exchange on an earlier paper [Quayle (2020). Acta Cryst. A76, 410–420] has led to the clarification of some of the points. image

Schlagwort(e): 548 ; group–subgroup relationships ; nitride materials ; wurtzite type

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

32

Unbekannt

X‐SPEC: a 70 eV to 15 keV undulator beamline for X‐ray and electron spectroscopies (2021)

Weinhardt, Lothar ; Steininger, Ralph ; Kreikemeyer-Lorenzo, Dagmar ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-06-26

Beschreibung: X‐SPEC is a high‐flux spectroscopy beamline at the KIT (Karlsruhe Institute of Technology) Synchrotron for electron and X‐ray spectroscopy featuring a wide photon energy range. The beamline is equipped with a permanent magnet undulator with two magnetic structures of different period lengths, a focusing variable‐line‐space plane‐grating monochromator, a double‐crystal monochromator and three Kirkpatrick–Baez mirror pairs. By selectively moving these elements in or out of the beam, X‐SPEC is capable of covering an energy range from 70 eV up to 15 keV. The flux of the beamline is maximized by optimizing the magnetic design of the undulator, minimizing the number of optical elements and optimizing their parameters. The beam can be focused into two experimental stations while maintaining the same spot position throughout the entire energy range. The first experimental station is optimized for measuring solid samples under ultra‐high‐vacuum conditions, while the second experimental station allows in situ and operando studies under ambient conditions. Measurement techniques include X‐ray absorption spectroscopy (XAS), extended X‐ray absorption fine structure (EXAFS), photoelectron spectroscopy (PES) and hard X‐ray PES (HAXPES), as well as X‐ray emission spectroscopy (XES) and resonant inelastic X‐ray scattering (RIXS).

Beschreibung: X‐SPEC is a high‐flux undulator beamline for electron and X‐ray spectroscopy with an energy range from 70 eV to 15 keV. It offers X‐ray absorption spectroscopy (XAS), extended X‐ray absorption fine structure (EXAFS), photoelectron spectroscopy (PES) and hard X‐ray PES (HAXPES), as well as X‐ray emission spectroscopy (XES) and resonant inelastic X‐ray scattering (RIXS) for in vacuo, in situ and operando sample environments. image

Schlagwort(e): 548 ; undulator beamline ; soft X‐ray ; tender X‐ray ; hard X‐ray ; in situ ; operando ; HAXPES ; RIXS ; XAS ; XES

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

33

Unbekannt

On incoherent diffractive imaging (2021)

Lohse, Leon M. ; Vassholz, Malte ; Salditt, Tim

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2022-04-07

Beschreibung: Incoherent diffractive imaging (IDI) promises structural analysis with atomic resolution based on intensity interferometry of pulsed X‐ray fluorescence emission. However, its experimental realization is still pending and a comprehensive theory of contrast formation has not been established to date. Explicit expressions are derived for the equal‐pulse two‐point intensity correlations, as the principal measured quantity of IDI, with full control of the prefactors, based on a simple model of stochastic fluorescence emission. The model considers the photon detection statistics, the finite temporal coherence of the individual emissions, as well as the geometry of the scattering volume. The implications are interpreted in view of the most relevant quantities, including the fluorescence lifetime, the excitation pulse, as well as the extent of the scattering volume and pixel size. Importantly, the spatiotemporal overlap between any two emissions in the sample can be identified as a crucial factor limiting the contrast and its dependency on the sample size can be derived. The paper gives rigorous estimates for the optimum sample size, the maximum photon yield and the expected signal‐to‐noise ratio under optimal conditions. Based on these estimates, the feasibility of IDI experiments for plausible experimental parameters is discussed. It is shown in particular that the mean number of photons per detector pixel which can be achieved with X‐ray fluorescence is severely limited and as a consequence imposes restrictive constraints on possible applications.

Beschreibung: Starting from a simple model of stochastic fluorescence emission, a theory is derived of contrast formation and signal‐to‐noise ratio for incoherent diffractive imaging; its feasibility for plausible experimental parameters is discussed. image

Schlagwort(e): ddc:548

Sprache: Englisch

Materialart: doc-type:article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

34

Unbekannt

Structure determination of organic compounds by a fit to the pair distribution function from scratch without prior indexing (2021)

Schlesinger, Carina ; Habermehl, Stefan ; Prill, Dragica

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-06-26

Beschreibung: A method for the ab initio crystal structure determination of organic compounds by a fit to the pair distribution function (PDF), without prior knowledge of lattice parameters and space group, has been developed. The method is called `PDF‐Global‐Fit' and is implemented by extension of the program FIDEL (fit with deviating lattice parameters). The structure solution is based on a global optimization approach starting from random structural models in selected space groups. No prior indexing of the powder data is needed. The new method requires only the molecular geometry and a carefully determined PDF. The generated random structures are compared with the experimental PDF and ranked by a similarity measure based on cross‐correlation functions. The most promising structure candidates are fitted to the experimental PDF data using a restricted simulated annealing structure solution approach within the program TOPAS, followed by a structure refinement against the PDF to identify the correct crystal structure. With the PDF‐Global‐Fit it is possible to determine the local structure of crystalline and disordered organic materials, as well as to determine the local structure of unindexable powder patterns, such as nanocrystalline samples, by a fit to the PDF. The success of the method is demonstrated using barbituric acid as an example. The crystal structure of barbituric acid form IV solved and refined by the PDF‐Global‐Fit is in excellent agreement with the published crystal structure data.

Schlagwort(e): 548 ; pair distribution function analysis ; structure determination ; total scattering technique ; similarity measures ; PDF‐Global‐Fit

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

35

Unbekannt

Structural basis of chitin utilization by a GH20 β‐N‐acetylglucosaminidase from Vibrio campbellii strain ATCC BAA‐1116 (2021)

Meekrathok, Piyanat ; Bürger, Marco ; Porfetye, Arthur T. ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-07-01

Beschreibung: Vibrio species play a crucial role in maintaining the carbon and nitrogen balance between the oceans and the land through their ability to employ chitin as a sole source of energy. This study describes the structural basis for the action of the GH20 β‐N‐acetylglucosaminidase (VhGlcNAcase) in chitin metabolism by Vibrio campbellii (formerly V. harveyi) strain ATCC BAA‐1116. Crystal structures of wild‐type VhGlcNAcase in the absence and presence of the sugar ligand, and of the unliganded D437A mutant, were determined. VhGlcNAcase contains three distinct domains: an N‐terminal carbohydrate‐binding domain linked to a small α+β domain and a C‐terminal (β/α)8 catalytic domain. The active site of VhGlcNAcase has a narrow, shallow pocket that is suitable for accommodating a small chitooligosaccharide. VhGlcNAcase is a monomeric enzyme of 74 kDa, but its crystal structures show two molecules of enzyme per asymmetric unit, in which Gln16 at the dimeric interface of the first molecule partially blocks the entrance to the active site of the neighboring molecule. The GlcNAc unit observed in subsite −1 makes exclusive hydrogen bonds to the conserved residues Arg274, Tyr530, Asp532 and Glu584, while Trp487, Trp546, Trp582 and Trp505 form a hydrophobic wall around the −1 GlcNAc. The catalytic mutants D437A/N and E438A/Q exhibited a drastic loss of GlcNAcase activity, confirming the catalytic role of the acidic pair (Asp437–Glu438).

Beschreibung: Crystal structures of a GH20 β‐N‐acetylglucosaminidase from V. campbellii reveal substrate specificity in chitin utilization.

Schlagwort(e): 577.14 ; GH20 β‐N‐acetylglucosaminidase ; chitin recycling ; Vibrio spp ; marine bacteria

Materialart: article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

36

Unbekannt

Resolution of a bent‐crystal spectrometer for X‐ray free‐electron laser pulses: diamond versus silicon (2021)

Kaganer, Vladimir M. ; Petrov, Ilia ; Samoylova, Liubov

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-09-29

Beschreibung: The resolution function of a spectrometer based on a strongly bent single crystal (bending radius of 10 cm or less) is evaluated. It is shown that the resolution is controlled by two parameters: (i) the ratio of the lattice spacing of the chosen reflection to the crystal thickness and (ii) a single parameter comprising crystal thickness, its bending radius, distance to a detector, and anisotropic elastic constants of the chosen crystal. The results allow the optimization of the parameters of bent‐crystal spectrometers for the hard X‐ray free‐electron laser sources.

Beschreibung: The resolution function of a bent‐crystal spectrometer for pulses of an X‐ray free‐electron laser is evaluated. Under appropriate conditions, the energy resolution reaches the ratio of the lattice spacing to the crystal thickness. image

Schlagwort(e): 548 ; X‐ray free‐electron lasers ; X‐ray spectroscopy ; bent crystals ; diamond crystal optics ; femtosecond X‐ray diffraction

Materialart: map

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

37

Unbekannt

Separation of the inelastic and elastic scattering in time‐of‐flight mode on the pinhole small‐angle neutron scattering diffractometer KWS‐2 (2021)

Balacescu, Livia ; Brandl, Georg ; Radulescu, Aurel

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-09-29

Beschreibung: To study and control the incoherent inelastic background in small‐angle neutron scattering, which makes a significant contribution to the detected scattering from hydrocarbon systems, the KWS‐2 small‐angle neutron scattering diffractometer operated by the Jülich Centre for Neutron Science (JCNS) at Heinz‐Maier Leibnitz Zentrum (MLZ), Garching, Germany, was equipped with a secondary single‐disc chopper that is placed in front of the sample stage. This makes it possible to record in time‐of‐flight mode the scattered neutrons in the high‐Q regime of the instrument (i.e. short incoming wavelengths and detection distances) and to discard the inelastic component from the measured data. Examples of measurements on different materials routinely used as standard samples, sample containers and solvents in the experiments at KWS‐2 are presented. When only the elastic region of the spectrum is used in the data‐reduction procedure, a decrease of up to two times in the incoherent background of the experimentally measured scattering cross section may be obtained. The proof of principle is demonstrated on a solution of bovine serum albumin in D2O.

Beschreibung: A new chopper has been installed at the sample position in front of the sample stage at the KWS‐2 small‐angle neutron‐scattering diffractometer of the Jülich Centre for Neutron Science. The pulsed beam and the time‐of‐flight data acquisition enable the separation of elastic and inelastic scattering from hydrogenous samples.

Schlagwort(e): 548 ; TOF‐SANS ; incoherent neutron scattering ; inelastic neutron scattering ; hydrocarbon systems

Materialart: map

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

38

Unbekannt

Czochralski growth of mixed cubic sesquioxide crystals in the ternary system Lu2O3–Sc2O3–Y2O3 (2021)

Kränkel, Christian ; Uvarova, Anastasia ; Haurat, Émile ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2021-09-29

Beschreibung: Cubic rare‐earth sesquioxide crystals are strongly demanded host materials for high power lasers, but due to their high melting points investigations on their thermodynamics and the growth of large‐size crystals of high optical quality remain a challenge. Detailed thermal investigations of the ternary system Lu2O3–Sc2O3–Y2O3 revealing a large range of compositions with melting temperatures below 2200°C and a minimum of 2053°C for the composition (Sc0.45Y0.55)2O3 are presented. These reduced temperatures enable for the first time the growth of high optical quality mixed sesquioxide crystals with disordered structure by the conventional Czochralski method from iridium crucibles. An (Er0.07Sc0.50Y0.43)2O3 crystal is successfully grown and characterized with respect to its crystallographic properties as well as its composition, thermal conductivity and optical absorption in the 1 µm range.

Beschreibung: The phase diagram of the ternary system Lu2O3–Sc2O3–Y2O3 is investigated and compositions with melting points below 2200°C are found. This allows for the first successful growth of the mixed cubic sesquioxide crystal (Er0.07Sc0.50Y0.43)2O3 by the Czochralski method from an iridium crucible. image

Schlagwort(e): 548 ; crystal growth ; optical materials ; phase diagrams ; melting points ; rare earth sesquioxides

Materialart: map

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

39

Unbekannt

Sub‐micrometer focusing setup for high‐pressure crystallography at the Extreme Conditions beamline at PETRA III (2022)

Glazyrin, K. ; Khandarkhaeva, S. ; Fedotenko, T. ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2022-06-24

Beschreibung: Scientific tasks aimed at decoding and characterizing complex systems and processes at high pressures set new challenges for modern X‐ray diffraction instrumentation in terms of X‐ray flux, focal spot size and sample positioning. Presented here are new developments at the Extreme Conditions beamline (P02.2, PETRA III, DESY, Germany) that enable considerable improvements in data collection at very high pressures and small scattering volumes. In particular, the focusing of the X‐ray beam to the sub‐micrometer level is described, and control of the aberrations of the focusing compound refractive lenses is made possible with the implementation of a correcting phase plate. This device provides a significant enhancement of the signal‐to‐noise ratio by conditioning the beam shape profile at the focal spot. A new sample alignment system with a small sphere of confusion enables single‐crystal data collection from grains of micrometer to sub‐micrometer dimensions subjected to pressures as high as 200 GPa. The combination of the technical development of the optical path and the sample alignment system contributes to research and gives benefits on various levels, including rapid and accurate diffraction mapping of samples with sub‐micrometer resolution at multimegabar pressures.

Beschreibung: Facing the challenges of X‐ray diffraction from tiny samples subjected to multimegabar pressures, instrumentation developments are presented that enable, among other studies, single‐crystal data collection from micrometer‐ to sub‐micrometer‐sized grains. The developments are based on a sub‐micrometer beam capability employing compound refractive lenses operating with a phase correcting plate and a precise motorization solution.

Schlagwort(e): ddc:548

Sprache: Englisch

Materialart: doc-type:article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

40

Unbekannt

Robust approaches for model‐free small‐angle scattering data analysis (2022)

Bender, Philipp ; Honecker, Dirk ; Bersweiler, Mathias ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2022-10-04

Beschreibung: The small‐angle neutron scattering data of nanostructured magnetic samples contain information regarding their chemical and magnetic properties. Often, the first step to access characteristic magnetic and structural length scales is a model‐free investigation. However, due to measurement uncertainties and a restricted q range, a direct Fourier transform usually fails and results in ambiguous distributions. To circumvent these problems, different methods have been introduced to derive regularized, more stable correlation functions, with the indirect Fourier transform being the most prominent approach. Here, the indirect Fourier transform is compared with the singular value decomposition and an iterative algorithm. These approaches are used to determine the correlation function from magnetic small‐angle neutron scattering data of a powder sample of iron oxide nanoparticles; it is shown that with all three methods, in principle, the same correlation function can be derived. Each method has certain advantages and disadvantages, and thus the recommendation is to combine these three approaches to obtain robust results.

Beschreibung: Three different approaches are compared for determination of the correlation function from the small‐angle neutron scattering data of a powder sample of iron oxide nanoparticles.

Schlagwort(e): ddc:548

Sprache: Englisch

Materialart: doc-type:article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

41

Unbekannt

Structure determination from unindexed powder data from scratch by a global optimization approach using pattern comparison based on cross‐correlation functions (2022)

Habermehl, Stefan ; Schlesinger, Carina ; Schmidt, Martin U.

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2022-06-16

Beschreibung: A method of ab initio crystal structure determination from powder diffraction data for organic and metal–organic compounds, which does not require prior indexing of the powder pattern, has been developed. Only a reasonable molecular geometry is required, needing knowledge of neither unit‐cell parameters nor space group. The structures are solved from scratch by a global fit to the powder data using the new program FIDEL‐GO (`FIt with DEviating Lattice parameters ‐ Global Optimization'). FIDEL‐GO uses a similarity measure based on cross‐correlation functions, which allows the comparison of simulated and experimental powder data even if the unit‐cell parameters deviate strongly. The optimization starts from large sets of random structures in various space groups. The unit‐cell parameters, molecular position and orientation, and selected internal degrees of freedom are fitted simultaneously to the powder pattern. The optimization proceeds in an elaborate multi‐step procedure with built‐in clustering of duplicate structures and iterative adaptation of parameter ranges. The best structures are selected for an automatic Rietveld refinement. Finally, a user‐controlled Rietveld refinement is performed. The procedure aims for the analysis of a wide range of `problematic' powder patterns, in particular powders of low crystallinity. The method can also be used for the clustering and screening of a large number of possible structure candidates and other application scenarios. Examples are presented for structure determination from unindexed powder data of the previously unknown structures of the nanocrystalline phases of 4,11‐difluoro‐, 2,9‐dichloro‐ and 2,9‐dichloro‐6,13‐dihydro‐quinacridone, which were solved from powder patterns with 14–20 peaks only, and of the coordination polymer dichloro‐bis(pyridine‐N)copper(II).

Beschreibung: A new method for the structure determination of molecular crystals from unindexed powder data has been developed and successfully applied. The method performs a global optimization using pattern comparison based on cross‐correlation functions.

Schlagwort(e): ddc:548

Sprache: Englisch

Materialart: doc-type:article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

42

Unbekannt

Site dependence of the magnetocaloric effect in Mn5−xFexSi3 (2022)

Ait Haddouch, Mohammed ; Abboushi, Nour ; Sharma, Neetika ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2022-12-06

Beschreibung: The nuclear and magnetic structures of Mn3Fe2Si3 are investigated in the temperature range from 20 to 300 K. The magnetic properties of Mn3Fe2Si3 were measured on a single crystal. The compound undergoes a paramagnetic to antiferromagnetic transition at TN2 ≃ 120 K and an antiferromagnetic to antiferromagnetic transition at TN1 ≃ 69 K. A similar sequence of magnetic phase transitions is found for the parent compound Mn5Si3 upon temperature variation, but the field‐driven transition observed in Mn5Si3 is not found in Mn3Fe2Si3, resulting in a strongly reduced magnetocaloric effect. Structurally, the hexagonal symmetry found for both compounds under ambient conditions is preserved in Mn3Fe2Si3 through both magnetic transitions, indicating that the crystal structure is only weakly affected by the magnetic phase transition, in contrast to Mn5Si3 where both transitions distort the nuclear structure. Both compounds feature a collinear high‐temperature magnetic phase AF2 and transfer into a non‐collinear phase AF1 at low temperature. While one of the distinct crystallographic sites remains disordered in the AF2 phase in the parent compound, the magnetic structure in the AF2 phase involves all magnetic atoms in Mn3Fe2Si3. These observations imply that the distinct sites occupied by the magnetic atoms play an important role in the magnetocaloric behaviour of the family.

Beschreibung: The nuclear and magnetic structures of Mn3Fe2Si3 are determined and the magnetic properties are compared with those of the parent compound Mn5Si3. The results imply that the distinct magnetic sites play an important role in the magnetocaloric behaviour of the family. image

Schlagwort(e): ddc:548 ; magnetocaloric effect ; magnetic structure ; neutron diffraction ; synchrotron diffraction ; site dependence

Sprache: Englisch

Materialart: doc-type:article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

43

Unbekannt

HTD2: a single‐crystal X‐ray diffractometer for combined high‐pressure/low‐temperature experiments at laboratory scale (2022)

Fischer, Andreas ; Langmann, Jan ; Vöst, Marcel ; [weitere]

International Union of Crystallography | 5 Abbey Square, Chester, Cheshire CH1 2HU, England

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 2022-12-15

Beschreibung: High‐pressure (HP) X‐ray diffraction experiments at low temperature (LT) require dedicated instruments as well as non‐standard sample environments and measuring strategies. This is especially true when helium cryogenic temperatures below 80 K are targeted. Furthermore, only experiments on single‐crystalline samples provide the prerequisites to study subtle structural changes in the p–T phase diagram under extreme LT and HP conditions in greater detail. Due to special hardware requirements, such measurements are usually in the realm of synchrotron beamlines. This contribution describes the design of an LT/HP diffractometer (HTD2) to perform single‐crystal X‐ray diffraction experiments using a laboratory source in the temperature range 400 〉 T 〉 2 K while applying pressures of up to 20 GPa.

Beschreibung: The design and operation of a newly commissioned single‐crystal X‐ray diffractometer (HTD2) are presented. The device enables experiments under simultaneous low‐temperature and high‐pressure conditions using a laboratory X‐ray source.

Schlagwort(e): ddc:548 ; HTD2 ; low temperature ; high pressure ; single crystals ; instrumentation

Sprache: Englisch

Materialart: doc-type:article

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

CITATION GEO-LEO

S·F·X

Volltext

44

Digitale Medien

Optimization of mechanical strength of reinforced composites. 1. Study on the effect of reactive bismaleimide on the mechanical performance of CaCo3-filled polypropylene (1995)

Khunova, V. ; Sain, M. M.

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 224 (1995), S. 9-20

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Der Einfluß von 3-Phenylenbismaleimid auf die Werkstoffeigenschaften von CaCO3 gefüllten Polypropylen-Verbundstoffen wurde untersucht. Die Verarbeitungstemperatur spielte eine entscheidende Rolle bei der Herstellung der Verbundwerkstoffe. Bei Verarbeitungstemperaturen oberhalb der Bismaleimid-Zersetzungstemperatur zeigte die Bismaleimid-Verbindung einen positiven Effekt. Die chemische Zusammensetzung der modifizierten Verbunde wurde mit den mechanischen Eigenschaften korreliert. Basierend auf ESCA-Analysen werden Wechselwirkungen zwischen dem Polymeren und CaCO, diskutiert.

Notizen: The effect of 3-phenylene bismaleimide on the mechanical performance of an inorganic filler-based polypropylene composite was studied. The selection of processing temperature played a significant role in the preparation of such composites. A positive effect of the bismaleimide compound was obtained for a processing temperature above the decomposition temperature of bismaleimide. The chemical composition of the modified composite was correlated to its mechanical strength by experimentation involving a rotatable design. An interaction between polymer and CaCO3 has been proposed based on ESCA analysis.

Zusätzliches Material: 9 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052240102

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

45

Digitale Medien

The effect of the processing steps on the oxidative stability of polyethylene tubing crosslinked by irradiation (1995)

Iring, M. ; Fodor, Z. ; Bődy, M. ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 224 (1995), S. 33-48

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Chemische und mechanische Eigenschaften von Zwischenprodukten der PE-Schrumpfschlauch-Produktion wurden bei unterschiedlichen Compound-Zusammensetzungen (PE, ein aromatisches Amin oder Phenolderivat als Antioxidans und in einigen Fällen ein Flammschutzmittel und/oder eine Elastomerkomponente) untersucht.Während der Herstellung, besonders während der durch Elektronenstrahlung initiierten Vernetzung, nimmt die thermooxidative Stabilität des Materials gegenüber der des compoundierten Granulats ab. Das aromatische Amin scheint bei gleicher Zusammensetzung das wirksamere und strahlungsbeständigere Antioxidans im Vergleich zum Phenolderivat zu sein. Die Oxidationsstabilität der hergestellten Schrumpfschläuche wird nicht von der Qualität des eingesetzten PE-Ausgangsgranulats beeinflußt.Durch die Alterung des Materials ändern sich die mechanischen Eigenschaften geringfügig. Die Elastomerzugabe bewirkt keine Änderung von Zugfestigkeit und Reißdehnung. Die Stabilität des Endprodukts ist bei weitem ausreichend, um den Spannungen, die beim Schrumpfen während des Gebrauchs auftreten, standzuhalten. Die gute Zugfestigkeit des Materials wird durch die Alterung ebenfalls nicht beeinträchtigt.Bei der Extrusion des Granulats tritt keine nennenswerte Änderung des Molekulargewichts bzw. der Molekulargewichtsverteilung auf. Durch die Bestrahlung wird das Material vernetzt und zu mehr als 50% unlöslich, und seine thermooxidativen Eigenschaften ändern sich deutlich gegenüber dem ursprünglichen PE und dem daraus compoundierten Material.

Notizen: Some chemical and mechanical properties of intermediate products obtained in the production of PE heat-shrinkable tubes were studied at different compositions of the material containing PE, antioxidant (aromatic amime or phenol) and, in some cases, flame retardant and/or an elastomer.In the course of the production phase, the thermooxidative stability decreases compared to that of compounded granulate. The greatest decrease is caused by irradiation. The aromatic amine seems to be a more effective antioxidant at similar compositions than the phenol derivative, and it shows a better resistance against irradiation. The oxidative stability of the finished shrinkable tubes is not affected by the quality of commercial granulate (initial polyethylene).Mechanical properties change slightly upon ageing, and the introduction of the elastomer did not alter the tensile strength and elongation at break. The remaining stability of the end product was still high enough to bear the stress of shrinking in use, and the good tensile strength of the material did not decrease upon thermal ageing either.In the extrusion of the granulated compound no significant change in the distribution and average molecular weight took place. Irradiation produced more than 50% insoluble fraction and the thermooxidative properties of the crosslinked sample changed significantly compared to the original PE and to the compound prepared from it.

Zusätzliches Material: 4 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052240104

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

46

Digitale Medien

Thermogravimetrie als brennbarkeitsbestimmungs-methode für lineare polyurethane (1995)

Pielichowski, Krzysztof ; Pielichowski, Jan ; Altenburg, Horst ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 224 (1995), S. 89-96

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: In the present work oxygen index (OI) measurements and thermogravimetric analysis (TG) for a series of polyurethanes based on diols and isocyanate were conducted. It was found that a correlation exists between some of the thermal degradation parameters obtained from TG and OI-values. Analysis of experimental results confirms that the amount of mass loss at 250°C is directly proportional to the OI-value. It was also found that the logarithmic temperatures of maximal decomposition rates are directly proportional to the OI-values.

Notizen: In der vorliegenden Arbeit wurden für eine Serie von Polyurethanen auf der Basis von Diol und Isocyanat der Sauerstoffindex (SI) gemessen und die thermische Zersetzung mittels thermogravimetrischer Analyse (TG) untersucht. Dabei wurde ein Zusammenhang zwischen einigen Parametern der thermischen Zersetzung und den SI-Werten gefunden. Die Auswertung der experimentellen Ergebnisse zeigte, daß die Höhe des Massenverlustes bei 250°C und die SI-Werte direkt proportional zueinander sind. Derselbe Zusammenhang besteht auch zwischen dem Logarithmus der Temperatur bei der maximalen Zersetzungsgeschwindigkeit und den SI-Werten.

Zusätzliches Material: 5 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052240109

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

47

Digitale Medien

Studies on thermal stability of modified polycarboxylate cements (1995)

Bansal, R. K. ; Tewari, U. S. ; Singh, P. ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 224 (1995), S. 109-114

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Poly(acrylsäre-co-acrylamid) wurde mit Zinkoxid und Kryolith (Na3AlF6) in unterschiedlichen Verhältnissen gemischt und bei Raumtemperatur zu Zahnzementen ausgehärtet. IPDT, Temperaturen bei maximaler Abbaugeschwindigkeit, Aktivierungsenergien und Frequenzfaktoren des thermischen Abbaus der Proben wurden aus thermogravimetrischen Messungen ermittelt. Die Probe mit 20 Gew.-% Kryolith in der Füllstoffmischung ist thermisch sehr stabil.

Notizen: Dental cement compositions made by mixing poly(acrylic acid-co-acrylamide) and mixtures of zinc oxide and cryolite (Na3AIF6) in various proportions of 10-50 wt.-% (w/w) were cured at room temperature. From thermogravimetric analyses of the samples, the integral procedural decomposition temperatures (IPDT), maximum decomposition temperatures, activation energies and frequency factors were evaluated. The cured cement sample containing 20 wt.-% cryolite in the filler mixture is thermally very stable.

Zusätzliches Material: 2 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052240111

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

48

Digitale Medien

Synthesis and characterization of water-soluble diazonium salts as contrast-enhancement materials (1995)

Liu, Jui-Hsiang ; Her, Chi-Fon ; Liu, Hung-Tsai ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 224 (1995), S. 133-144

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Die wasserlöslichen aromatischen Diazonium-Doppelsalze p-Diazodiphenylaminchlorid/Zinkchlorid (DZS-1) und p-Diazoanisolchlorid/Zinkchlorid (DZS-2) wurden auf ihre Verwendbarkeit als photobleichbare Farbstoffe in der Kontrastverstärkungslithographie untersucht. Nach Untersuchung der Bleicheigenschaften der hergestellten Salze wurde DZS-1 in wäßrigen Lösungen mit Poly(vinylalkohol) als Kontrastverstärkungssystem eingesetzt. Die thermische Stabilität, der Resistkontrast, die Bestrahlungsparameter und andere Bleicheigenschaften wurden untersucht. Im Vergleich zu einem handelsüblichen i-Linien-Photoresist beträgt das Kontrastverhältnis der DZS-1/PVA CEL-Schicht 1,67.

Notizen: Water soluble aromatic diazonium double salts, p-diazodiphenylamine chloride zinc chloride (DZS-1) and p-diazoanisol chloride zinc chloride (DZS-2), have been evaluated as photobleachable dyes for contrast enhancement lithography. After testing the bleaching characteristics, aqueous solutions of DZS-1 and poly(vinyl alcohol) were used as a contrast enhancement material. Thermal stability, resist contrast, exposure parameters and other bleaching characteristics of the photobleachable membranes were investigated. A. commercial i-line photoresist was used to evaluate the contrast ratio of the DZS-1/PVA CEL layer. The contrast ratio obtained in this investigation is 1.67.

Zusätzliches Material: 10 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052240114

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

49

Digitale Medien

Comparison of the coupling behaviour of diisocyanate and bisoxazolines in modification of liquid crystalline poly(ethylene terephthalate-co-oxybenzoate)s (1995)

Böhme, Frank ; Leistner, Dirk ; Baier, Angela

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 224 (1995), S. 167-178

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Methylen-4,4′-diphenyldiisocyanat und zwei unterschiedliche Bisoxazoline wurden für Kopplungsreaktionen in mit Carboxygruppen terminierten flüssigkristallinen Poly(ethylenterephthalat-co-oxybenzoat)en eingesetzt. Um definierte Bedingungen zu gewährleisten, erfolgte die Synthese von Copolyestern mit unterschiedlichen Carboxygruppenkonzentrationen. Die Bestimmung des Carboxygruppengehalts wird beschrieben.Es erfolgt ein Vergleich des Kopplungsverhaltens beider Arten von Kettenverlängerern. Es konnte nachgewiesen werde, daß die Bisoxazoline bedeutend schneller reagieren als das Diisocyanat. Durch einen geringen Überschuß and Bisoxazolin in der Reaktionsmischung konnte einer thermischen Schädigung vorgebeugt werden. Abhängig von der Menge an zugegebenem Koppler wurden bei den modifizierten Copolyestern Oxazolinendgruppen beobachtet. Außerdem werden mögliche Vernetzungsreaktionen und die thermische Stabilität diskutiert.

Notizen: Methylene-4,4′-diphenyldiisocyanate and two different bisoxazolines were used for coupling reactions in carboxy-terminated liquid crystalline poly(ethylene terephthalate-co-oxybenzoate). In order to guarantee defined conditions, copolyesters with different carboxylic group concentrations were synthesized. The determination of the carboxylic group content is described.The coupling behaviour of both types of chain extenders has been compared. It was evidenced that the bisoxazolines reacted significantly faster than the diisocyanate. A slight excess of bisoxazoline in the reaction mixture prevented thermomechanical degradation. Depending on the amount of coupling agent added, an oxazoline termination of the copolyester was observed. Additionally, probable crosslinking reactions and the thermal stability have been discussed.

Zusätzliches Material: 7 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052240117

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

50

Digitale Medien

Announcements (1995)

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 224 (1995), S. 201-201

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052240120

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

51

Digitale Medien

Optimization of mechanical strength of reinforced composites. 2. Reactive bismaleimide-modified polypropylene composites filled with talc and zeolitePart 1 cf.2. (1995)

Khunova, V. ; Sain, M. M.

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 225 (1995), S. 11-20

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Der Einfluß von 3-Phenylenbismaleimid auf die Werkstoffeigenschaften von mit Talkum und Zeolith gefüllten Polypropylen-Verbundstoffen wurde untersucht. Durch geeignete Planung des Aufbaus kann die Produkteigenschaft optimiert werden. Die Kapazität zur Füllstoffaufnahme schwankt bei Polypropylen je nach Art des Füllstoffs. Ein hochbelastbarer Verbundstoff kann aus einem geeignet modifizierten, mit Zeolith gefüllten Polypropylen hergestellt werden, auch wenn der Füllstoff in der Verbundmatrix dominiert. Als Ursache dieser Verstärkung wird eine verbesserte Wechselwirkung zwischen dem Polymeren und dem Füllstoff angenommen.

Notizen: The effect of 3-phenylene bismaleimide as a modifier for talc and zeolite-filled polypropylene composites has been studied. The usefulness of the experimental design to assure best product properties has also been illustrated. Polypropylene shows a variable degree of filling capacity depending on the type of filler. A high-strength composite can be prepared with suitably modified zeolite-filled polypropylene even if filler is the dominant phase in the composite matrix. An improved interfacial interaction between polypropylene and filler is proposed to be the reason for this improvement of strength.

Zusätzliches Material: 3 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052250102

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

52

Digitale Medien

Oligomerization of 1-decene with Ziegler-Natta catalysts (1995)

Tembe, G. L. ; Bandyopadhyay, A. R. ; Pillai, S. M. ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 225 (1995), S. 51-61

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Die katalytische Oligomerisation von 1-Decen wurde mit Komplexverbindungen mehrerer Übergangsmetalle (Co(II), Co(III), Zr(IV), Ti(IV), Cr(III), V(V)) und Alkyl-aluminiumhalogeniden als Cokatalysatoren durchgeführt. Mit einem Chrom(III)-Et3Al2Cl3-Katalysatorsystem konnten Dimere (C20), Trimere (C30) und Tetramere (C40) von 1-Decen erhalten werden. Die kinematischen Viskositäten und Fließpunkte der hydrierten Oligomere wurden bestimmt und mit den Werten handelsüblicher Proben verglichen. Ein Mechanismus für die Oligomerisation von 1-Decen mit diesem Katalysatorsystem wird vorgeschlagen.

Notizen: The catalytic oligomerization of 1-decene has been carried out employing several transition metal complexes of Co(II), Co(III), Zr(IV), Ti(IV), Cr(III), V(V) in combination with alkyl aluminum halides as cocatalysts. The chromium(III)-Et3Al2Cl3 system exhibits good oligomerizing activity yielding dimers (C20), trimers (C30) and tetramers (C40) of 1-decene. The kinematic viscosities and pour points of hydrogenated oligomers have been determined and compared with those of commercial samples. The probable mechanism of oligomerization of 1-decene on this catalyst is described.

Zusätzliches Material: 3 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052250105

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

53

Digitale Medien

Zur Häurtung von Bisphenol-A-diglycidether mit Dicyandiamid in Gegenwart von Beschleuniger-Addukten (1995)

Sanftenberg, Heike ; Fedtke, Manfred

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 225 (1995), S. 99-107

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Single-component formulations of epoxy resins with reactive accelerators must be storable. The preparation of several blocked accelerators is described. The basicity of tertiary amines, which correlates with accelerating effects, as well as acidity and structure of polyphenols and modified novolacs influences the extend of blocking. The curing process was investigated by measurements of gel time and viscosity.

Notizen: Einkomponentige Epoxidharzsysteme mit effizienten Reaktionsbeschleunigern müssen lagerstabil sein. Daher wurden Versuche unternommen, Beschleuniger auf Basis von tertiären Aminen mit modifizierten Phenolnovolaken zu blockieren. Das Ausmaß der Blockierung ist sowohl von der Basizität der Amine, die mit der beschleunigenden Wirkung korreliert, als auch von der Acidität und dem strukturellen Aufbau der modifizierten Phenole abhängig. Die Bewertung der Härtungseigenschaften erfolgte über Gelzeitbestimmungen und Viskositätsmessungen.

Zusätzliches Material: 2 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052250109

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

54

Digitale Medien

Comparison of the crack growth method and the crack stress whitening zone method for the fracture toughness determination of phenolphthalein poly(ether ketone)Key Project of the National Natural Science Foundation of China. (1995)

Han, Yanchun ; Yang, Yuming ; Li, Binyao ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 225 (1995), S. 131-138

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Die Bruchzähigkeit von Phenolphthalein-Poly(etherketon) bei 190°C wurde mit zwei verschiedenen Methoden bestimmt, der konventionellen Rißwachstumsmethode und der „stress whitening zone“-Methode. Die gute Übereinstimmung der Ergebnisse zeigt, daß letztere Methode zur Bestimmung der Rißinitiierung einiger Polymerer herangezogen werden kann, für die das „blunting line concept“ nicht geeeignet ist.

Notizen: Fracture toughness values of phenolphthalein poly(ether ketone) (PEK-C) at 190°C were determined by two different methods, i.e. the conventional crack growth method and the crack stress whitening zone method, which show consistent results. This indicates that the crack stress whitening zone method can be used to determine the crack initiation of some polymers for which the blunting line concept is unsuitable.

Zusätzliches Material: 7 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052250112

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

55

Digitale Medien

Thermodynamic studies on some interpolymer interactions and stability of polycomplexes (1995)

Chatterjee, S. K. ; Nigam, Shalini ; Chhabra, Mamta

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 226 (1995), S. 13-22

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Stabilitätskonstanten und zugehörige thermodynamische Parameter (ΔH°, ΔS°) eines intermakromolekularen Komplexes aus Poly(acrylsäure-co-acrylamid), Poly(methacrylsäure-co-acrylamide) und Poly(N-vinylpyrrolidon) wurden mit bekannten Methoden bei verschiedenen Temperaturen bestimmt. Dabei wurde eine stufenweise Auflösung des Komplexes in Abhängigkeit von der Temperatur beobachtet, die mit den Stabilitätskonstanten und den thermodynamischen Parametern korreliert wurde.

Notizen: Stability constant and related thermodynamic parameters (ΔH° and ΔS°) of a multicomponent intermacromolecular complex consisting of poly(acrylic acid-coacrylamide), poly(methacrylic acid-co-acrylamide) and poly(N-vinylpyrrolidone) have been determined using known methods. A distinct stepwise disintegration of the complex at different temperatures has been observed, and this could be correlated with the stability constant and thermodynamic parameters calculated at various temperatures.

Zusätzliches Material: 2 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052260102

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

56

Digitale Medien

The effect of ultrasound in ethyl methacrylate polymerization and depolymerization reactions (1995)

Erolan, Nezih ; Arisan, Füsun ; Çatalgil-Giz, Huceste

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 226 (1995), S. 53-57

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Der Einfluß von Ultraschall auf die Polymerisation und Depolymerisation von Ethylmethacrylat und der Mechanismus des Kettenabbruchs wurden untersucht. Der Polymerisationsumsatz war unabhängig von den verwendeten Ultraschallbedingungen (800 W, 35 kHz). Depolymerisationsversuche mit Ultraschall bei 20°C zeigten, daß Kettenabbruch im wesentlichen durch Disproportionierung stattfindet; dabei werden Molekulargewichte nicht unter ca. 500000 erreicht.

Notizen: The effect of ultrasound in ethyl methacrylate polymerization and depolymerization and the chain termination mechanism for ethyl methacrylate have been studied. Polymerization conversion at 60°C did not depend on energy (80 W) and frequency (35 kHz) of ultrasound applied. In ultrasound depolymerization studies at 20°C the governing termination mechanism was found to be disproportionation and the lower limiting molecular weight was Mn = 500 000.

Zusätzliches Material: 2 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052260106

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

57

Digitale Medien

Reaktive membrancopolymere auf acrylbasis (1995)

Abel, Christiane ; Malsch, Günter ; Lehmann, Ingeburg ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 226 (1995), S. 71-87

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: The copolymerization of acrylonitrile with maleic anhydride was investigated to synthesize acylic reactive polymers for manufacture of membranes that serve as support for covalent enzyme immobilization. The free-radical copolymer synthesis was carried out in solution (N,N-dimethylformamide (DMF), dimethylacetamide (DMAC), γ-butyrolactone, ethylene carbonate), by precipitation polymerization (dioxane) as well as bulk polymerization. The polymers were characterized using IR spectroscopy, elementary analysis, NMR spectroscopy, gel permeation chromatography, viscosity measurements, osmometry and potentiometry.The kinetic parameters were followed by dilatometric measurements up to high conversions. The anhydride content in the monomer mixtures showed a significant influence on the rate of polymerization and the molecular weight. With raised concentration of anhydride the polymerization rate and molecular weights decreased. Film forming polymers (M̄η 〉 30 000 g/mol) can be obtained by all copolymerization procedures with exception of solution polymerization in DMF and DMAC, respectively. The content of maleic anhydride in the membrane polymers did not exceed 5 mol-%, even though the maleic anhydride content in the monomer mixtures was raised up to the equimolar mixture. Nevertheless, such low maleic anhydride content of prepared membranes is enough for successful enzyme immobilization with amyloglucosidase (copolymer was prepared in γ-butyrolactone, M̄η = 49 000 g/mol, cPMSA = 0,3 mol-%).

Notizen: Die Copolymerisation des Acrylnitrils mit Maleinsäureanhydrid (MSA) wurde mit dem Ziel untersucht, acylfunktionalisierte Reaktivpolymere mit Filmbildungseigenschaften herzustellen, um diese in der Anwendung als Membran für kovalente Enzymfixierungen zu nutzen. Die radikalinitiierte Synthese der Copolymeren wurde in Lösung (Dimethylformamid (DMF), Dimethylacetamid (DMAC), γ-Butyrolacton, Ethylencarbonat), durch Fällungscopolymerisation (Dioxan) sowie in Substanz durchgeführt.Die Polymercharakterisierung erfolgte durch IR-Spektroskopie, Elementaranalyse, Kernresonanzspektroskopie, Gelpermeationschromatographie, Viskosimetrie, Osmometrie und Potentiometrie.Die Kinetik wurde durch dilatometrische Untersuchungen bis zu hohen Umsätzen verfolgt. Danach weist der Anhydridgehalt im Monomergemisch einen signifikanten Einfluß auf die Bruttopolymerisationsgeschwindigkeit und die Molmasse der Polymeren auf. Mit steigendem Anhydridanteil wird die Bruttopolymerisationsgeschwindigkeit herabgesetzt und eine Verringerung der Molmasse herbeigeführt. Die Copolymerisation von Acrylnitril und Maleinsäureanhydrid führt mit Ausnahme der Lösungspolymerisation in DMF bzw. DMAC zu Polymeren mit Molmassen oberhalb 30 000 g/mol, was ihre Anwendung als Membran ermöglicht. Die Einbaurate an Maleinsäureanhydrid in den Membranpolymeren ist bis einschließlich einer äquimolaren Zusammensetzung des Monomergemischs nicht größer als 5 mol-%. Derartig niedrige MSA-Reaktivgruppenanteile erweisen sich jedoch als ausreichend, um an einer aus einem Lösungspolymerisat (γ-Butyrolacton, M̄η = 49 000 g/mol, cPMSA = 0,3 mol-%) formierten Membran eine Enzymimmobilisierung mit Amyloglucosidase nachzuweisen.

Zusätzliches Material: 5 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052260108

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

58

Digitale Medien

Synthesis and characterization of photopolymers with azo units. Interfacial polyaddition, photolysis, photodegradation (1995)

Nuyken, Oskar ; Stebani, Jürgen ; Lang, Armin

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 226 (1995), S. 143-160

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Die Synthesen einer Aryl-alkyl-azodiisocyanat-Verbindung und einer Azoharnstoff-Modellsubstanz werden beschrieben. Aus dem Azodiisocyanat wurden durch Grenzflächen-Polyaddition neuartige Azoharnstoff-Polymer hergestellt. Die zahlenmittleren Molekulargewichte, bestimmt mit der Gelpermeationschromatographie (GPC), lagen zwischen 6000 und 9000. Die Photolyse- und Thermolysereaktionen der Modellsubstanzen und der Polymeren wurden mittels UV-Spektroskopie und Differentialkalorimetrie (DSC) verfolgt und mit den Ergebnissen von ähnlichen Azoamiden verglichen. Der photochemische Polymerabbau wurde mittels GPC untersucht.

Notizen: The synthesis of an aryl alkyl azo diisocyanate and a model azo urea is described. From the azo diisocyanate new azo polyureas were created by interfacial polyaddition. Molecular weights Mn in the range of 6000 to 9000 were determined by gel permeation chromatography (GPC). Photolysis and thermolysis of both, model compounds and polymers, were studied by UV-spectroscopy and differential scanning calorimetry (DSC), respectively, and the results were compared with those of similar azo amides. Photochemical polymer degradation was followed by GPC.

Zusätzliches Material: 8 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052260113

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

59

Digitale Medien

Announcements (1995)

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 226 (1995), S. 219-219

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052260120

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

60

Digitale Medien

Molecular structure of liquid-crystalline copolyesters of vanillic acid, 4-hydroxybenzoic acid and poly(ethylene terephthalate) (1995)

Li, Xin-Gui ; Huang, Mei-Rong ; Guan, Gui-He ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 227 (1995), S. 69-85

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Thermotrop flüssigkristalline Copolyester aus Vanillinsäure (V), 4-Hydroxybenzoesäure (B) und Polyethylenterephthalat (E) wurden mittels 1H-NMR-Spektroskopie und Gelpermeationschromatographie (GPC) untersucht. Die neun möglichen Diaden konnten detektiert und zugeordnet werden. Die Abfolge der Grundeinheiten der V/B/E-Copolyester ändert sich mit zunehmendem B-Anteil von statistischer Verteilung zur Blockbildung und ist außerdem geringfügig von der Katalysatorkonzentration und der Polykondensationsdauer abhängig. Die GPC-Ergebnisse deuten darauf hin, daß die V/B/E-Copolyester engere Molekulargewichtsverteilungen aufweisen als die B/E-Copolyester. Mit von 0 bis 5 mol-% steigendem V-Anteil verengt sich die Molekulargewichtsverteilung. Die Gelpermeationschromatogramme der meisten V/B/E-Copolyester weisen im Unterschied zu den Einzelsignalen der B/E-Copolyester Dublett-Peaks auf.

Notizen: Thermotropic liquid-crystalline copolyesters made from vanillic acid (V), 4-hydroxybenzoic acid (B) and poly(ethylene terephthalate) (E) were examined by 1H-NMR and GPC investigations. Nine possible diads could be identified and assigned. The sequence distribution of V/B/E copolyesters tends to change from random to block with an increase of B content in the copolyesters. The sequence distribution also varies slightly with catalyst concentration and polycondensation time. GPC results suggest that the V/B/E copolyesters have narrower molecular weight distribution (MWD) than B/E copolyesters. The MWD of the copolyesters narrows gradually with increasing V content from zero to 5 mol-%. The GPC chromatograms of the most V/B/E copolyesters show double peaks, which is different from the single peak of the GPC chromatograms of the B/E copolyesters.

Zusätzliches Material: 6 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052270108

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

61

Digitale Medien

Effect of pre-irradiation on radiation stability of co-polypropylene (1995)

Manaf, I. ; Yoshii, F. ; Makuuchi, K.

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 227 (1995), S. 111-120

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Die Strahlungsbeständigkeit von vorbestrahltem Polypropylen mit 2,5 Gew.-% Ethylenanteil wurde mitr einem Copolymeren aus Polypropylen und einem nukleierenden Agens im Hinblick auf die Strahlungssterilisation von medizinischen Geräten verglichen. Die Transparenz des Propylen-Ethylen-Copolymeren wurde durch die Vorbehandlung verbessert. Im Vergleich mit der ebenfalls verbesserten Transparenz des Copolymeren aus Polypropylen und dem nukleierenden Agens wurde durch die Vorbestrahlung die Strahlungsbeständigkeit während der Bestrahlung und bei der Lagerung des bestrahlten Materials verbessert. Dies wird auf die geringere Kristallinität des vorbestrahlten Polypropylens aufgrund von bei der Bestrahlung gebildeten Verzweigungen zurückgeführt.

Notizen: The radiation stability of the pre-irradiated copolymer of polypropylene containing 2.5 wt.-% ethylene units is compared with a copolymer of polypropylene with a nucleating agent with regard to radiation sterilization of medical devices. It is found that transparency property of the propylene-ethylene copolymer is improved through pre-irradiation processes. This finding was compared with the co-polypropylene with nucleating agent which also gives a better transparency property. In comparison, it is found that pre-irradiated copolymer exhibits better radiation stability during irradiation and during storage after irradiation. The radiation stability of the pre-irradiated copolymer is due to its lower crystallinity caused by the formation of branches during the pre-irradiation process.

Zusätzliches Material: 6 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052270111

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

62

Digitale Medien

Mitteilungen/Announcements (1995)

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 227 (1995), S. 193-193

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052270117

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

63

Digitale Medien

Poly(diaryl diazosulfide)s - synthesis and photolysisThis topic is part of the Ph.D.-Thesis of A. Lang.. Photopolymers, diazosulfides, interfacial polycondensation, photolysis (1995)

Nuyken, O. ; Lang, A. ; Staško, A. ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 228 (1995), S. 73-92

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Polydiaryldiazosulfide wurden durch Grenzflächenpolykondensation aus aromatischen Bisdiazoniumionen und Benzol-1,3-dithiol erhalten. Auf diese Weise wurden Molekulargewichte Mn von 3400 bis 11700 erreicht (GPC).Die neue Polymerklasse zeichnet sich durch hohe Photolabilität und relativ geringe Thermostabilität aus. Mittels UV-Spektroskopie wurde die Photolyse von Modellver-bindungen und Polymeren verfolgt, wobei in nahezu allen Fällen ein Zerfall 1. Ordnung beobachtet wurde. Der photochemische Kettenabbau konnte durch GPC-Untersuchungen verfolgt werden. Die thermische Stabilität der polymeren Diazosulfide wurde durch DSC-Messungen untersucht.

Notizen: Poly(diaryl diazosulfide)s were synthesized from aromatic bisdiazonium ions and benzene-1,3-dithiol via interfacial polycondensation. Number-average molecular weights Mn in the range of 3400 to 11700 were determined by gel permeation chromatography (GPC).The new polymer class is distinguished by high photosensitivity and low thermostability. First order kinetics during photolysis of nearly all polymers and model compounds under investigation was observed by means of UV spectroscopy. Polymer degradation upon irradiation was verified by GPC measurements. Thermal decay was followed by differential scanning calorimetry (DSC).

Zusätzliches Material: 9 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052280107

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

64

Digitale Medien

Methoden zur bestimmung des maleinsäureanhydridgehaltes in acrylnitril-copolymeren in gegenwart initialer carboxygruppen (1995)

Ziegler, Hans-Jörg ; Lehmann, Ingeburg ; Abel, Christiane ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 228 (1995), S. 161-178

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Three different titration methods were proved with respect to accuracy, reproducibility and handling for the determination of maleic anhydride (MSA) content in acrylonitrile (AN) copolymers in form of poly(AN-co-MSA) and poly(AN-co-styrene-co-MSA). The comparison comprises (i) the combined method A/H characterized by the reaction of anhydride groups (AG) with aniline and titration of the formed monoacid with methanolic KOH (A) and the complete hydrolysis of AG and titration of acid groups (SG) with aqueous NaOH (H), (ii) method B based on the conversion of AG with n-butylamine (BA) and back-titration of unreacted amine with HClO4 in glacial acetic acid and (iii) method C consisting of the reaction of AG with p-chloroaniline (pCA) followed by Cl-determination after the Schöniger-decomposition. Whereas all mentioned methods are suitable for the determination of AG in the presence of initial SG, the combination of A/H additionally allows the simultaneous determination of AG and SG. In comparison with the other methods the combination of A/H is to be favoured due to the possibility to obtain additional information about SG and because of the better results in accuracy, reproducibility and handling. By means of FTIR spectroscopy the content of AG and SG was estimated qualitatively and a correlation between the spectroscopic and potentiometric data of AG was discovered.

Notizen: Zur Bestimmung des Maleinsäreanhydrid(MSA)-Gehaltes in Acrylnitril(AN)-Copolymeren des Typs Poly(AN-co-MSA) bzw. Poly(AN-co-Styrol-co-MSA) wurden drei verschiedene Titrationsmethoden hinsichtlich ihrer Richtigkeit, Reproduzierbarkeit sowie ihres Zeitaufwandes geprüft. Miteinander verglichen wurden (i) eine Methodenkombination A/H bestehend aus dem Teilschritt A, einer Umsetzung der Anhydridgruppen (AG) mit Anilin einschließlich der Titration der Monosäuregruppen mit methanolischer KOH, und dem Teilschritt H, einer vollständigen Hydrolyse der AG und Titration der Säuregruppen (SG) mit wäßriger NaOH, (ii) Methode B basierend auf der Reaktion der AG mit n-Butylamin (BA) und der Rücktitration des nicht umgesetzten Amins mit Perchlorsäure (HClO4) in Eisessig und (iii) Methode C, beruhend auf der Umsetzung der AG mit p-Chloranilin (pCA) und nachfolgender Chlorbestimmung durch Schöniger-Aufschluß. Während sich alle genannten Methoden prinzipiell für die AG-Bestimmung in Gegenwart initialer SG empfehlen, ist darüber hinaus über A/H eine simultane Bestimmung von AG und SG möglich. Wegen dieses zusätzlichen Informationsgewinns, ihrer besseren Reproduzierbarkeit, der erhöhten Richtigkeit sowie des geringeren zeitlichen und apparativen Aufwandes ist die Kombination A/H zu favorisieren. Mit Hilfe der FTIR-Spektroskopie wurde der Gehalt an AG und SG qualitativ verfolgt und eine Korrelation zwischen den Bandenintensitäten der AG und den potentiometrisch erhaltenen Werten gefunden.

Zusätzliches Material: 6 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052280113

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

65

Digitale Medien

Curing of unsaturated polyester resins with low exotherm peak (1995)

Penczek, Piotr ; Rudnik, Ewa ; Arczewska, Bogumiła ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 229 (1995), S. 15-27

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Die Härtung eines ungesättigten Polyesterharzes mit niedrigem Exotherm-Peak wurde mit der Standardmethodik und der Differential-Kalorimetrie (DSC) untersucht. Ein Kupfersalz und α-Methylstyrol wurden als Polymerisationsverzögerer benutzt. Der Einfluß der Verzögerer auf die Temperatur des exothermen Peaks, die Gelzeit, die Härtungsenthalpie und die Polymerisationskinetik wurden untersucht.

Notizen: The curing behavior of an unsaturated polyester resin with low exotherm peak was studied by a standard procedure and by differential scanning calorimetry (DSC). A copper salt and α-methylstyrene were used as the polymerization retarders. The influence of the retarders on the exotherm peak temperature, gelation time, exothermic heat and the polymerization kinetics was investigated.

Zusätzliches Material: 8 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052290102

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

66

Digitale Medien

Modified syndiotactic polypropene: Poly(propene-co-octene) and blends with atactic oligopropene (1995)

Jüngling, Stephan ; Mülhaupt, Rolf ; Fischer, David ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 229 (1995), S. 93-112

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Propen und 1-Octen wurden mit dem syndiospezifischen Metallocen-Katalysator Me2C(Cp)(Flu)ZrCl2/MAO copolymerisiert. Es wurde ein hoher, statistischer Octeneinbau beobachtet. Niedrige Octenkonzentrationen beeinflußten die Aktivität des Katalysators nur wenig; Molekulargewicht, Kristallinität, E-Modul und Glastemperatur wurden dagegen mit ansteigendem Octengehalt erniedrigt. Blends aus ataktischem Oligopropen und syndiotaktischem Polypropen bzw. Poly(propen-co-octen) wurden aus einer Toluol-Lösung hergestellt. Diese Lösungsblends wurden mit einem Reaktorblend verglichen, der mit einem Hybrid-Katalysator bestehend aus einer Mischung von syndiospezifischem Me2C(Cp)(Flu)ZrCl2/MAO und unspezifischem Cp2ZrCl2/MAO hergestellt wurde. Das ataktische Oligopropen wirkte als Weichmacher, der E-Modul und Glastemperatur der Blends erniedrigte.

Notizen: Propene and 1-octene were copolymerized with the syndiospecific homogeneous metallocene catalyst Me2C(Cp)(Flu)ZrCl2/MAO. Large amounts of octene were incorporated randomly. While catalyst activity was not affected markedly by low octene content, molecular weight, crystallinity, Young's modulus, and glass transition temperature were reduced with increasing octene content. Blends of atactic oligopropene with syndiotactic polypropene and poly(propene-co-octene) were prepared from toluene solution and compared with a reactor blend prepared with a hybrid catalyst containing a mixture of syndiospecific Me2C(Cp)(Flu)ZrCl2/MAO and non-specific Cp2ZrCl2/MAO. Atactic oligopropene acted as plasticizer reducing Young's modulus and glass transition temperature of the blends.

Zusätzliches Material: 12 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052290106

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

67

Digitale Medien

Inner surface and void system of regenerated cellulose fibers (1995)

Schurz, Josef ; Lenz, Jürgen ; Wrentschur, Erich

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 229 (1995), S. 175-184

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Die innere Oberfläche und das Hohlraumsystem von verschiedenartigen Celluloseregeneratfasern werden mit Röntgenkleinwinkelstreuung untersucht. Dabei wird gefunden, daß alle Fasern ein Hohlraumsystem von 0,01 bis 0,1% (Volumenanteil 10-4-10-3) aufweisen. Es zeigt sich jedoch, daß die Größe des Hohlraumsystems für die mechanischen Eigenschaften wenig Bedeutung hat. Es ist vielmehr die Gestalt der Hohlräume und ihre Orientierung, die hier wesentlich sind. Es wird gefunden, daß langgestreckte Hohlräume, vermutlich orientiert, für gute mechanische Eigenschaften verantwortlich sind. Damit können auch verbesserte textile Eigenschaften von Lyocellfasern des NMMO-Typs erklärt werden.

Notizen: Both the inner surface and the void system of different cellulose regenerate fibers are investigated with X-ray small angle scattering. Thereby it turns out that all fibers have a void system of 0.01 to 0.1% (volume fraction 10-4-10-3). However, the amount of the void system has little influence on the mechanical properties. Rather, it is the shape of the voids and their orientation which proves essential. It is found that elongated voids, probably well oriented, are responsible for superior mechanical properties. This explains also improved textile properties of lyocell fibers of the NMMO type.

Zusätzliches Material: 6 Tab.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052290112

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

68

Digitale Medien

Radiation-induced copolymerization of methacrylic and acrylic acid with acrylamide (1995)

Georgieva, M. ; Arabadjieva, T. ; Tsankov, C.

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 230 (1995), S. 1-12

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Die mit γ-Strahlen induzierte Polymerisation von Methacrylsäure (MA) und Acrylsäure (AA) mit Acrylamid (AAm) (M2) in Substanz wurde untersucht. Die nach Kelen-Tüdős berechneten Copolymerisationsparameter betragen r1 = 1.35 und r2 = 0.22 für MA-AAm bzw. r1 = 1.75 und r2 = 0.10 für AA-AAm. Die Polymerisationsgeschwindigkeit hängt sowohl von der Temperatur als auch von der Comonomerzusammensetzung ab. Die differentialkinetischen Kurven sind unimodal, was darauf hinweist, daß nur der Copolymerisationsprozeß abläuft. Ein zweites Maximum in diesen Kurven wird mit Vernetzung und der Bildung wasserunlöslicher Bestandteile erklärt. Die Copolymeren sind weiße Pulver; die wasserlöslichen Fraktionen sind im Gegensatz zu den wasserunlöslichen nicht giftig, aber als Immunmodulatoren weniger aktiv.

Notizen: A study was made of the γ-radiation-induced bulk copolymerization of the methacrylic acid-acrylamide (M2) (MA-AAm) and acrylic acid-acrylamide (M2) (AA-AAm) monomeric pairs. The copolymerization reactivity ratios deterined according to the Kelen-Tüdő method were: r1 = 1.35, r2 = 0.22 for the MA-AAm pair, and r1 = 1.75, r2 = 0.10 for the AA-AAm pair. It has been established that the polymerization rate depends both on the composition of the starting reaction mixture and on the reaction temperature. The differential kinetic curves obtained are unimodal ones, suggesting the occurrence of only one process, i.e. copolymerization. A second maximum in these curves, appearing at elevated temperature, is explained by crosslinking and formation of a water-insoluble fraction. The copolymers obtained are white powders; in contrast to their water-insoluble fractions, the water-soluble ones are not toxic but they are less active as immunomodulators.

Zusätzliches Material: 11 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052300101

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

69

Digitale Medien

Synthesis and hydrolytic stability of model poly(ester urethane ureas) (1995)

Fambri, Luca ; Penati, Amabile ; Kolarik, Jan

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 228 (1995), S. 201-219

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Die Hydrolyse von Poly(ester-urethan-harnstoffen) (PURUs) wurde untersucht. Es handelt sich dabei um einen komplexen Vorgang, der die Analyse der Beziehung zwischen der Zusammensetzung der PURUs und ihrer Hydrolysebeständigkeit erschwert. Es wurde gefunden, daß die Hydrolysebeständigkeit mit Zunahme (i) der Polyol-Acidität, (ii) des Estergruppen-Gehaltes, (iii) der Beweglichkeit der Hauptketten und (iv) deren Hydrophilie abnimmt; die Molmasse des Polyols scheint keinen merklichen Einfluß darauf zu haben. Der negative Einfluß von Ethergruppen (obwohl hydrolysebeständiger als Estergruppen) ist möglicherweise auf eine Zunahme der Hauptkettenbeweglichkeit und den dadurch leichteren Zugang von Wassermolekülen zu Estergruppen zurückzuführen. Der positive Effekt von aromatischen Ringen in Polyolen kann einer erhöhten Steifigkeit der Hauptkette als auch einer ansteigenden Hydrolysebeständig-keit benachbarter Estergruppen durch Resonanzeffekte zugeschrieben werden. Insgesamt kann angenommen werden, daß die beschriebenen Effekte sich überlagern und gleichzeitig die resultierende Hydrolysebeständigkeit vorherbestimmen. Es sollte daher möglich sein, qualitative Vorhersagen bezüglich der Hydrolysebeständigkeit in Abhängigkeit von der Zusammensetzung der PURUs zu treffen.

Notizen: Hydrolysis of poly(ester urethane ureas) (PURUs) is a complex phenomenon which impedes the analysis of the relationships between their composition and hydrolytic stability. Hydrolytic stability of PURUs decreases due to rising (i) polyol acidity, (ii) content of ester groups, (iii) flexibility and (iv) hydrophilicity of the backbones; molar mass of polyols does not seem to have any appreciable effect on it. Negative influence of ether groups (which have better hydrolytic stability than ester groups) is probably linked to the increase in the backbone flexibility and, consequently, to easier access of water molecules to ester groups. Positive effect of aromatic rings in polyols can be ascribed to enhanced rigidity of the backbones as well as to increased hydrolytic stability of adjacent ester groups due to the resonance effect. It can be presumed that the mentioned effects will superpose and simultaneously predestine the resulting hydrolytic resistance. Considering the observed tendencies, it is possible to qualitatively predict the trends how the hydrolytic stability will respond to changes in PURUs composition.

Zusätzliches Material: 6 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052280116

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

70

Digitale Medien

Synthesis and characterization of a naphthoquinonediazide positive photoresist derived from bis(hydroxymethyl)phenol (1995)

Liu, Jui-Hsiang ; Liu, Huang-Tsai ; Tsai, Fu-Ren

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 229 (1995), S. 63-72

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Eine neuartige lichtempfindliche Naphthochinondiazid-Verbindung (NQD) wurde aus 2,6-Bis(hydroxymethyl)-3,4-dimethylphenol und Toluoldiisocyanat synthetisiert und mit IR-, NMR- und Elementaranalyse identifiziert. Die Bleicheigenschaften unter Lichteinwirkung wurden mit UV-Spektrophotometrie bestimmt. Die Anwendung von NQD in der Photolithographie als positiver Photoresist sowie einer wäßrigen Lösung von NQD, Novolak, Cellosolve-Acetat und DMF als lichtempfindliches Material wurde untersucht. Das hergestellte NQD erwies sich als effektive Komponente in positiven Photoresists. Die optimalen Bedingungen der UV-Dosis, Schichtdicke und Resistzusammensetzung wurden abgeschätzt. Die Auflösung des positiven Photoresists wurde durch Rasterelektronenmikroskopie bestimmt. Außerdem wurde der Einfluß von UV-Dosis und -Wellenlänge, Einwirkungsdauer und Entwicklungszeit auf die Empfindlichkeit und die Auflösung des Photoresists untersucht.

Notizen: A new photosensitive naphthoquinonediazide (NQD) was synthesized from 2,6-bis-(hydroxymethyl)-3,4-dimethylphenol and toluene diisocyante. NQD was identified by using IR, NMR and elemental analyses. Photobleachable characteristics were evaluated by UV spectrophotometry. Applications of the NQD on the photolithography as a positive working photoresist were investigated. The aqueous solution of NQD, novolak, cellosolve acetate, and DMF was used as a photosensitive material. It was found that NQD synthesized in this investigation can be used as an effective component in a positive photoresist. Optimal conditions of the UV dose, coating thickness, and development of the resist system were estimated. Resolution of the positive resist was evaluated by SEM technique. Effects of UV dose, exposure time, development time, and exposure UV wave length on the sensitivity and resolution of the photoresist were investigated.

Zusätzliches Material: 6 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052290104

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

71

Digitale Medien

Investigations on free radical polymerization of phenyl-substituted 2-methylene-1,3-dioxanes (1995)

Schulze, Thomas ; Klemm, Elisabeth

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 229 (1995), S. 123-132

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Die radikalinduzierte Polymerisation von phenlysubstituierten 2-Methylen-1,3-dioxanen wurde untersucht. Es kann gezeigt werden, daß die grundlegende Polymerisationstendenz derartiger Ketenacetale darin besteht, über die Doppelbindung zu hochmolekularen Polyacetalen ohne eine nennenswerte Ringöffnung zu polymerisieren. Einflußfaktoren, wie z. B. resonanzstabilisierte Kettenenden oder sterische Hinderungen während des Wachstumsschrittes sind nicht in der Lage, die Polymerisation in die Richtung der gewünschten Ringöffnung zu lenken.Mittels Dichtemessungen wurden Informationen über das Schrumpfungsverhalten gewonnen. Es konnte gezeigt werden, daß raumerfüllende Substituenten am 2-Methylen-1,3-dioxansystem bei der Homopolymerisation grundsätzlich eine geringe Volumenschrumpfung bewirken und die Schrumpfung von herkömmlichen Monomeren bei der Copolymerisation herabsetzen können.

Notizen: We have investigated the free radical polymerization of phenyl-substituted 2-methylene-1,3-dioxanes. It was shown that there is a basic tendency of such ketenacetals to undergo exclusively a vinyl polymerization forming high-molecular polyacetals without any detectable ring opening. The polymerization with the desirable ring opening reaction cannot be controlled by factors like resonance stabilized chain ends or steric hindrance in the growing step.From densitometric measurements we got new information about the shrinkage behaviour. It was demonstrated that bulky substituents attached to the 2-methylene-1,3-dioxane system result in a significant low shrinkage in homopolymerization and the shrinkage of common comonomers can be decreased by copolymerization.

Zusätzliches Material: 5 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052290108

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

72

Digitale Medien

Acrylamide polymerization in concentrated bicontinuous systems (1995)

Vašková, V. ; Klimová, M. ; Bartoň, J.

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 229 (1995), S. 133-143

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Die Polymerisation von Acrylamid (AAM) in einer konzentrierten bikontinuierlichen Mikroemulsion wurde studiert. Die Initiierungsstelle bei Verwendung von radikalischen Initiatoren mit verschiedener Wasserlöslichkeit wurde untersucht. Es wurde festgestellt, daß ein vollständig oder teilweise wasserlöslicher radikalischer Initiator die Acrylamidpolymerisation in der untersuchten Mikroemulsion effektiv initiieren kann. Die dadurch entstandenen Polymeren weisen eine Spezialstruktur auf, die von der Zusammensetzung der ursprünglichen Mikroemulsion abhängig ist.

Notizen: The polymerization of acrylamide (AAM) in concentrated bicontinuous microemulsion systems was studied. The locus of initiation using radical initiators with various water-solubility was investigated. It was found that water-soluble and partially water-soluble initiators initiate the AAM polymerization in the reaction systems under investigation very effectively. The polymers thus formed have special structures dependent on the composition of the original concentrated bicontinuous microemulsion.

Zusätzliches Material: 3 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052290109

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

73

Digitale Medien

Mitteilungen/announcements (1995)

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 229 (1995), S. 209-209

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052290115

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

74

Digitale Medien

Orientierung von Bacteriorhodopsin in einer Polymermatrix (1995)

Balfanz, Friedhelm ; Schwarz, Hans-Hartmut ; Richau, Klaus ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 229 (1995), S. 185-198

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Bacteriorhodopsin is a component of the purple membrane of Halobacterium halobium. It shows photochemical activity and undergoes a series of photocyclic-associated conformational changes. Incorporated in a matrix it is suitable as a light energy/electrical current transducer. Very important is an orientation of purple membrane fragments.The reaction between solutions of a polyelectrolyte and multivalent ions leads to a ionotropic gel, that is a gel with an ordered structure. If the gel formation was carried out in the presence of purple membrane fragments, the Bacteriorhodopsin is highly oriented and produces a photoelectrical signal. It consists a correlation between the light direction and the orientation of the purple membrane due to the gel formation.

Notizen: Bacteriorhodopsin ist Bestandteil der sogenannten Purpurmembran des Mikroorganismus Halobacterium halobium. Es zeigt photochemische Aktivität und kann als biologischer Lichtwandler fungieren. Voraussetzung hierfür ist eine orientierte Anordnung der Purpurmembran in einer Matrix.Das Prinzip der ionotropen Gelbildung, d. h. die geordnete Strukturbildung einer Polyelektrolytlösung infolge eines gerichteten Diffusionsstromes von mehrwertigen Ionen gestattet die orientierte Anordnung der Purpurmembran. Durch Lichteinwirkung werden elektrische Signale induziert. Es besteht ein Zusammenhang zwischen der Richtung des Strahlungseinfalls und der durch die Gelwachstumsrichtung festgelegten Orientierung der Purpurmembran.

Zusätzliches Material: 10 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052290113

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

75

Digitale Medien

Stabilizer consumption and lifetime prediction in ageing of crosslinked polyethylenePaper presented at the “16th International Conference on Advances in the Stabilization and Degradation of Polymers” in Luzern (Switzerland), June 14-17, 1994. (1995)

Audouin, L. ; Langlois, V. ; Verdu, J. ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 232 (1995), S. 1-12

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Notizen: The thermal oxidation of β ray-crosslinked polyethylene (XLPE) was studied in temperatures ranging from 90 to 180°C. Various analytical methods were used for determination of an end of the induction period on bulk samples: gravimetry, ultimate tensile properties, density and color change. On microtome slices of ∼30 μm thickness the depth distribution of oxidation products, phenolic antioxidant, density and tensile ultimate properties were followed as a function of exposure time by respectively IR and UV spectrophotometry, densitometry and Microfoil Tensile Testing.Depending on the testing method different durations of induction period (DIP) were obtained. They increase in following order:Phenol depletion 〈 Ultimate elongation 〈 Density 〈 Carbonyl build-up ≤ Color change 〈 Weight loss.The difference between phenol depletion DIP and carbonyl build-up DIP can be considered as negligible at temperatures higher than the melting point (about 30%) but it reachs more than 100% at T〈 Tm.Different kinetic regimes of phenol consumption were observed depending on the exposure temperature. A mechanistic interpretation is proposed explaining the role of the stabilizer system in initially homogeneous and later heterogeneous oxidation of the bulk material.The Arrhenius law was applied to different durations of induction period. A discontinuity appeared in the melting point region (120-130°C) which is tentatively interpreted in terms of different stabilizer concentration in amorphous phase of semicrystalline material (T 〈 Tm) and in melt material (T 〉 Tm). On the basis of the presented complex study of polyethylene thermo-oxidation, different aspects of lifetime predictions are discussed.

Zusätzliches Material: 10 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052320101

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

76

Digitale Medien

Pyrolysis with respect to recycling of polymerPaper presented at the “16th International Conference on Advances in the Stabilization and Degradation of Polymers” in Luzern (Switzerland), June 14-17, 1994. (1995)

Kaminsky, W.

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 232 (1995), S. 151-165

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Notizen: Most plastics are produced from oil and have a high potential as hydrocarbon sources for the chemical industry. Pyrolysis is a practicable way to pyrolyze mixed plastics. The fluidized bed pyrolysis has turned out to be particularly advantageous. 25 to 45 percent of product gas with a high heating value and 30 to 50 percent of an oil rich in aromatics, could be recovered. The oil is comparable to that of a mixture of light benzene and bituminous coal tar. Up to 60 percent of ethene and propene are produced by using mixed polyolefins as feedstock. Under appropriate conditions the pyrolysis could be successful on the market.

Zusätzliches Material: 1 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052320110

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

77

Digitale Medien

Photodegradation of UV absorbers: Kinetics and structural effectsPaper presented at the “16th International Conference on Advances in the Stabilization and Degradation of Polymers” in Luzern (Switzerland), June 14-17, 1994. (1995)

Pickett, James E. ; Moore, James E.

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 232 (1995), S. 229-238

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Notizen: When poly(methyl methacrylate) films containing UV absorbers are exposed to UV light, the absorbers undergo photodegradation resulting in loss of absorbance. If the data extend for less than one half-life, both zero and first order kinetic treatment give fairly linear fits, but the rate constants so derived are dependent on the initial absorbance of the films. When the zero order rate constants are corrected to account for the higher rate of degradation near the surface compared with the bulk that occurs in highly absorbing films, consistent “infinite absorption” zero order rate constants are derived. The inhomogeneous degradation is due to only the highly absorbed, higher energy light contributing significantly to the degradation. For the benzophenone and benzotriazole classes of absorber, at least 65% of the degradation is due to light with wavelengths 〈 350 nm. Structural variations generally caused only small differences in the rates of degradation of these classes of absorbers unless the substitutions disrupted the intramolecular hydrogen bonds that are critical for stability. If the hydrogen bond is weakened, the absorber is less stable.

Zusätzliches Material: 3 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052320114

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

78

Digitale Medien

Polymers from renewable resources, VI. Synthesis and characterization of thermosetting resins derived from cashewnut shell liquid/formaldehyde/substituted aromatic compounds (1995)

Sahoo, S. K. ; Swain, S. K. ; Mohapatra, D. K. ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 233 (1995), S. 1-13

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Aus Cardanol, einem Bestandteil der Schale der Cashewnuß, wurde durch Kondensation mit Formaldehyd und substituierten aromatischen Verbindungen unter saurer oder basischer Katalyse eine Reihe von Harzen hergestellt und anhand ihrer IR-Spektren charakterisiert. Sie lassen sich als selektive Ionenaustauscher für bestimmte Ionen verwenden, was mittels einer Gleichgewichtsmethode geprüft wurde. Das thermische Verhalten der Harze wurde untersucht, und ein plausibler Abbaumechanismus wird vorgeschlagen.

Notizen: A large number of resins have been synthesized by reacting cardanol, a constituent of cashewnut shell liquid, with formaldehyde and substituted aromatic compounds in the presence of acidic and basic catalysts. The resins have been characterized by IR spectra. They were shown to be selective ion exchangers for certain metal ions. A batch equilibrium method was used for studying the selectivity of the metal ions. The thermal behaviour of the resins has been studied and a plausible degradation mechanism has been suggested.

Zusätzliches Material: 3 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052330101

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

79

Digitale Medien

Search for the sources of color in thermally aged, weathered and γ-ray irradiated bisphenol a polycarbonatePaper presented at the “16th International Conference on Advances in the Stabilization and Degradation of Polymers” in Luzern (Switzerland), June 14-17, 1994. (1995)

Factor, Arnold

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 232 (1995), S. 27-43

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Notizen: Bisphenol A polycarbonate (BPA-PC) is an important high performance engineering thermoplastic well known for its outstanding combination of toughness, transparency and heat resistance. These properties make it an idel material for demanding applications where it is exposed to external stresses such as elevated temperatures, ultraviolet light and γ-ray sterilization. However, on extended exposure to these conditions, BPA-PC slowly degrades, turning progressively more yellow, eventually leading to a decrease in its physical properties. Over the years, there has been numerous studies made to understand these degradative processes so as to better design more stable BPA-PC formulations. In this paper, this chemistry is briefly reviewed along with more recent work in this area with a special emphasis on the efforts made to identifying the actual chemical species responsible for the observed yellow color and the chemistry responsible for their formation.

Zusätzliches Material: 7 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052320103

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

80

Digitale Medien

Model studies on the mechanism of hals stabilizationPaper presented at the “16th International Conference on Advances in the Stabilization and Degradation of Polymers” in Luzern (Switzerland), June 14-17, 1994. (1995)

Step, Eugene N. ; Turro, Nicholas J. ; Klemchuk, Peter P. ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 232 (1995), S. 65-83

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Notizen: Hindered Amine Light Stabilizers (HALS) are know to inhibit the photo-oxidation of polymers. A key reaction in their stabilization mechanism is believed to be the conversion of a hindered aminoether into a nitroxyl radical. Several different possible mechanisms for this conversion were explored. One, the elimination of the aminoether to form an olefin and hydroxylamine (an intermediate in the formation of a nitroxyl), while possible at high temperatures, cannot account for the inhibitory activity we observed for secondary and primary aminoethers. Direct radical displacement by peroxy radicals was also considered. However, the products predicted by this reaction pathway were not observed. Finally, oxidation of the nitrogen by a peroxy radical, by either electron transfer or a radical attack on the nitrogen, was investigated. While electron transfer was shown to be unlikely, direct oxidation of the aminoether nitrogen was supported by our results. A detailed mechanism for the reaction of both alkyl- and acyl-peroxy radicals with aminoethers is proposed.

Zusätzliches Material: 2 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052320105

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

81

Digitale Medien

Physical, dynamic-mechanical and thermogravimetric analysis of aromatic and cycloaliphatic-based poly(urethaneurea)s (1995)

Cascella, Ciro ; Malinconico, Mario ; Martuscelli, Ezio ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 231 (1995), S. 79-89

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Die thermischen und dynamisch-mechanischen Eigenschaften einiger linearer kautschukelastischer Polyurethane mit chemisch unterschiedlichen starren Segmenten wurden untersucht und zur chemischen Zusammensetzung in Beziehung gesetzt. Interessante Zusammenhänge wurden zwischen der Kristallinität der elastischen Polyurethanharnstoffe und der aromatischen oder cycloaliphatischen Natur der Diisocyanat-Komponenten gefunden. Darüber hinaus scheinen die Ergebnisse bei einem bestimmten Verhältnis zwischen starren und flexiblen Segmenten und bei gegebener Zusammensetzung der flexiblen Gruppen auf eine bessere Phasenseparation bei den Polyurethanharnstoffen mit cycloaliphatischen starren Segmenten als bei solchen mit aromatischen, starren Einheiten hinzuweisen.

Notizen: Experimental batches of linear rubber-like polyurethanes characterized by the presence of chemically different hard segments are studied and their thermal and dynamic-mechanical properties are related to the differences in chemical compositions. Interesting correlations are found between the development of crystallinity in such elastomeric poly(urethaneurea)s and the aromatic or alicyclic nature of the diisocyanate. Moreover, for a fixed ratio between hard and soft segments, and for a given composition of the soft segment, the results seem to indicate a better degree of phase separation in cycloaliphatic-based hard segment poly(urethaneurea)s than in aromatic-based hard segment poly(urethaneurea)s.

Zusätzliches Material: 7 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052310108

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

82

Digitale Medien

Dispersion polymerization of styrene and methyl methacrylate initiated by poly(oxyethylene) macromonomeric azoinitiators (1995)

Yildiz, Ufuk ; Hazer, Baki ; Capek, Ignác

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 231 (1995), S. 135-144

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Makromonomere Polyethylenoxid-Azoinitiatoren (Makroinimere) MIM-400 und MIM-1500 wurden synthetisiert und IR- und NMR-spektroskopisch sowie mit Hilfe der DSC-Analyse charakterisiert. Die mit diesen Makroinimeren initiierte Dispersions-polymerisation von Styrol bzw. Methylmethacrylat (MMA) in Ethanol/Wasser bei 60°C wurde untersucht. Dabei wurde gefunden, daß die Polymerisationsgeschwindig-keit mit zunehmender MIM-Konzentration ansteigt, wobei der Anstieg im Styrolsystem ausgeprägter war. Im Bereich von mittleren Umsätzen konnte gezeigt werden, daß die Polymerisationsgeschwindigkeit von MMA proportional der Potenz 1,7 bzw. 1,6 von [MIM-400] bzw. [MIM-1500] ist, während für Styrol eine Potenz von 2,5 bezüglich [MIM-400] gefunden wurde.

Notizen: Macromonomeric poly(oxyethylene) azoinitiators (macroinimers) MIM-400 and MIM-1500 were synthesized and characterized by IR and NMR spectroscopy and DSC techniques. The dispersion polymerizations of styrene and methyl methacrylate (MMA) initiated by poly(oxyethylene) macroinimers (MIM-400 and MIM-1500) in water/ethanol were investigated at 60°C. The rate of polymerization was found to increase with increasing concentration of MIM and the increase was more pronounced in the styrene system. In the range of medium conversions the rate of polymerization was found to be proportional to the 1.7th and 1.6th power of [MIM-400] and [MIM-1500] for MMA and to the 2.5th power of [MIM-400] for styrene, respectively.

Zusätzliches Material: 4 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052310112

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

83

Digitale Medien

Modell zur beschreibung der glasübergangstemperaturen binärer und ternärer mischungen von poly(styrol-co-n-butylmethacrylat)en (1995)

Schellenberg, Jürgen

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 231 (1995), S. 187-198

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Glass transition temperatures of binary and ternary blends of chemically uniform poly(styrene-co-n-butyl methacrylate)s with a mean content of 30.8 wt.-% of n-butyl methacrylate and number-average molar masses in the range of 4900 and 67000 g/mol have been investigated in relation to their composition. The blends showed significant deviations from an ideal behaviour with reference to a linearity between glass transition temperature and composition.This phenomenon is described by a mathematical model where polynoms are particularly well suited to represent the glass transition temperatures of the blends, partly exceeding those of the pure components. Finally, various reasons of these deviations were discussed. Here, energetical interactions seem to be of considerable importance combined with a nonadditivity of volumes.

Notizen: Die Glasübergangstemperaturen binärer und ternärer Mischungen chemisch einheitlicher Poly(styrol-co-n-butylmethacrylat)e mit einem mittleren n-Butylmethacrylat-Anteil von 30,8 Gew.-% und unterschiedlichen zahlenmittleren Molmassen im Bereich von 4900 bis 67000 g/mol wurden in Abhängigkeit von der Zusammensetzung untersucht. Es wurden wesentliche Abweichungen vom idealen Verhalten bezüglich einer linearen Abhängigkeit zwischen Glasübergangstemperatur und Zusammensetzung festgestellt.Dieses Verhalten konnte mit einem mathematischen Modell dargestellt werden, wobei sich insbesondere Polynome zur Beschreibung der teilweise über den Werten der Ausgangskomponenten liegenden Glasübergangstemperaturen der Mischungen als geeignet erwiesen. Schließlich wurden verschiedene Ursachen für diese Abweichungen diskutiert, wobei offensichtlich energetische Wechselwirkungen verbunden mit einer Nichtadditivität der Volumina von wesentlicher Bedeutung sind.

Zusätzliches Material: 4 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052310116

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

84

Digitale Medien

Zur bildung von polyepoxid-polyamid-netzwerken. Modelluntersuchungen am system phenylglycidether-ε-caprolactam (1995)

Tänzer, Wolfram ; Ludwig, Ina

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 233 (1995), S. 133-148

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: ε-Caprolactam (CL) and phenyl glycidyl ether (PGE) were homopolymerized using the initiator/accelerator-systems Na-caprolactam/N-acetyl-caprolactam (NaCL/AcCL) and Na-caprolactam/N-acetyl imidazole (NaCL/AcImi). In a one-pot reaction both monomers gave different oligomeric reaction products depending on the reaction temperature (100°C to 140°C, max. 240°C) but no regular copolymers. Soluble products were separated by HPLC and identified by means of spectroscopic methods. In acetone insoluble products were investigated by IR- and NMR-spectroscopy, mass spectrometry and elemental analysis.

Notizen: Es wurden Versuche zur Homopolymerisation von ε-Caprolactam (CL) und Phenylglycidether (PGE) mit den Initiator/Beschleuniger-Systemen Na-Caprolactam/N-Acetylcaprolactam (NaCL/AcCL) und Na-Caprolactam/N-Acetylimidazol (NaCL/AcImi) durchgeführt, um die für eine mögliche Copolymerisation von CL und PGE geeigneten Reaktionsbedingungen zu ermitteln. CL und PGE wurden in unterschiedlichen molaren Verhältnissen (CL : PGE = 1 : 5 bis 1 : 0,05) und bei Temperaturen zwischen 100°C und 140°C (max. 240°C) in einer Eintopfreaktion polymerisiert.Die löslichen Produkte wurden mittels HPLC getrennt und spektroskopisch identifiziert. Die in Aceton unlöslichen Produkte wurden mit IR- und NMR-Spektroskopie, Massenspektrometrie (MS) und Elementaranalyse untersucht.

Zusätzliches Material: 5 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1995.052330112

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

85

Digitale Medien

Fundamental properties of fluoropolyether-based resins and related coatings (1996)

Simeone, Giovanni ; Turri, Stefano ; Scicchitano, Massimo ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 236 (1996), S. 111-127

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Neuartige Fluoropolyether-Polyol-Harze, die mit konventionellen Härtern wie Polyisocyanaten oder Melaminen aushärtbar sind, wurden hergestellt. Zunächst wurden oligomere NCO-terminierte Prepolymere durch Addition von Fluorpolyether-Makrodiolen unterschiedlicher Molekulargewichte an Isophorondiisocyanate erhalten. Durch die Reaktion dieser Prepolymeren mit Trimethylolpropan wurden endständige Hydroxygruppen eingeführt. Die Viskosität von Lösungen dieser Harze wurde bei unterschiedlichen Konzentrationen (Massenbruch 0,4-0,8) und Temperaturen (25°C-65°C) gemessen. Die erhaltenen Werte wurden auf der Basis der Erickson-Gleichung (Konzentrationsabhängigkeit von η) und unter Berücksichtigung des WLF-und des Arrhenius-Modells (Temperaturabhängigkeit von η) diskutiert. Das thermische Verhalten der Harze und von ausgehärteten Filmen wurde mit DSC bestimmt. Dabei wurden zwei Glasübergange beobachtet, die den separierten fluorhaltigen und nicht-fluorhaltigen Phasen zugeordnet werden können. Die Analyse des Zugverhaltens der Filme zeigte besonders bei den mit Isocyanat gehärteten Proben ein ausgeprägtes hart-plastisches Verhalten. Diese Werkstoffe erscheinen für die Anwendung als hoch-wertige, dauerfeste und klare Beschichtungen geeignet.

Notizen: New fluoropolyether polyolic resins are presented suitable to be cured with conventional hardeners as polyisocyanates or melamines. These resins are prepared by addition of fluoropolyether macrodiols (Fomblin® ZDOLTX) of various molecular weights to isophorone diisocyanate (IPDI) to give oligomeric NCO-terminated prepolymers. The final hydroxy functionality is obtained by the reaction of those prepolymers with trimethylolpropane (TMP). The viscosity of the resins is measured at various concentrations (weight fraction 0.8 - 0.4) and temperatures (T = 25-65°C). The results are discussed in terms of the Erickson equation (η vs. concentration) and using the WLF and Arrhenius models (η vs. T). The thermal behavior is studied by DSC for both the resins and cured films indicating the presence of two Tgs, corresponding to the segregated fluorinated and hydrogenated phases, the former particularly evident with the highest molecular weights of the fluorinated macromer. Tensile curves of selfsupported films are then analyzed showing an evident tough-plastic behavior especially for the isocyanate-cured films. The application of such materials as high-durability clear coats is finally proposed.

Zusätzliches Material: 5 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1996.052360109

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

86

Digitale Medien

Modification of melamine-formaldehyde moulding compounds with epoxy resins (1996)

Braun, Dietrich ; Unvericht, Reinhard

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 237 (1996), S. 1-44

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Zur Verbesserung der Maßhaltigkeit und der Zähigkeit von gehärteten Melamin-Formaldehyd-Harz-Formmassen (MF) wurden teilverträgliche, methylolgruppenhaltige Epoxidharze (EP) auf Bisphenol A-Basis hergestellt und charakterisiert. Die Vernetzung solcher Epoxyresolharze durch 2-Ethyl-4-methylimidazol in Gegenwart von MF-Harz wurde untersucht. Spritzgepreßte Probekörper zeigen eine Zweiphasenstruktur; die EP-Phase kann als Wirt für carboxy-funktionalisierte, oligomere NBR-Kautschuke (CTBNX) dienen, die für sich allein in MF-Harzen nicht wirksam sind. Unter der Voraussetzung von kovalenten Bindungen in der Phasengrenzfläche kann durch den Zusatz von 0,5 bis 4 Gew.-% CTBNX zur MF-Formmasse bei EP-Anteilen bis 20 Gew.-% eine 50 bis 100proz. Steigerung von Bruchdehnung und Schlagzähigkeit erreicht werden, ohne daß Steifigkeit und Wärmeformbeständigkeit wesentlich abfallen. Bei moderaten EP/CTBNX-Gehalten wird zusätzlich die Nachschwindung von MF-Formteilen vermindert.

Notizen: In order to improve dimension stability and toughness of melamine formaldehyde moulding materials (MF), compatible bisphenol A epoxy resins (EP) with additional methylol groups were synthesized and characterized. Crosslinking of those epoxyresol resins with 2-ethyl-4-methylimidazole in the presence of MF resin was investigated. Transfer-moulded specimens revealed a two-phase morphology in which the EP phase is used as a host for modification with carboxylic functionalized oligomeric NBR rubber (CTBNX), which is not effective in MF moulding materials alone. The addition of 0.5 - 4 wt.-% CTBNX to the MF moulding materials at an epoxy content of maximum 20 wt.-% results in 50-100 % increase of elasticity and toughness without serious decrease in stiffness and heat deflection temperature, provided that covalent interfacial bonds exist. In addition, the post-shrinkage of MF parts decreases if a moderate EP/CTBNX content is introduced.

Zusätzliches Material: 26 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1996.052370101

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

87

Digitale Medien

New poly(vinyl chloride) blends, IIIPart II cf.5.. Physico-mechanical properties (1996)

Rusu, Mihai ; Bucevschi, Mircea-Dan ; Rusu, Daniela-Lorena

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 238 (1996), S. 11-30

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Der gleichzeitige Einfluß des Verhältnisses von Fließhilfsmittel (Paraloid K 120N), Rußart und Schlagzähmodifikator (CPE 3615 und Kane Ace B56 A) auf die wichtigsten physiko-mechanischen Eigenschaften unplastifizierter PVC-Mischungen wurde studiert.Die erhaltenen Resultate wurden mathematisch verarbeitet und graphisch als Funktionsflächen dargestellt. Bemerkenswert ist, daß die Einführung von 2,5 und 5 Teilen Ruß eine Verbesserung der physico-mechanischen Eigenschaften ermöglicht. Dieses Resultat ist durch die Anwesenheit der Schlagzäh- und Fließmodifikatoren zu erklären.

Notizen: The concurrent influence of the processing aid (Paraloid K 120N) and the carbon black ratio, as well as the nature and the ratio of the impact modifier (CPE 3615 and Kane Ace B56 A) on the main physico-mechanical characteristics of the poly(vinyl chloride)-based unplasticized mixtures have been studied. The results obtained, processed mathematically and plotted graphically in the form of response surfaces, evidenced that the improvement of certain physico-mechanical properties becomes possible by the introduction of 2.5 parts and 5.0 parts carbon black into these compounds. This is due to the introduction of impact modifiers and processing aids into the mixtures.

Zusätzliches Material: 6 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1996.052380102

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

88

Digitale Medien

New polyhydrazides and poly(1,3,4-oxadiazole)s containing pendent phenoxy groups (1996)

Hamciuc, Corneliu ; Schulz, Burkhard ; Bruma, Maria

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 238 (1996), S. 63-71

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Eine Reihe neuartiger Polyhydrazide mit endständigen Phenoxygruppen wurde aus äquimolaren Anteilen von Dicarbonsäuredichloriden und Phenoxyterephthalsäuredihydrazid durch Lösungspolykondensation in N-Methyl-2-pyrrolidinon (NMP) bei niedriger Temperatur hergestellt. Durch thermische Cyclisierung der Polyhydrazide wurden die entsprehchenden Poly(1,3,4-oxadiazol)e mit endständigen Phenoxygruppen erhalten. Die Polymeren wurden durch Viskosimetrie, Löslichkeitsuntersuchungen, IR-Spektroskopie, Differentialkalorimetrie und Thermogravimetrie charakterisiert.

Notizen: A series of new polyhydrazides containing pendent phenoxy groups has been synthesized by low-temperature solution polycondensation of equimolar amounts of diacid dichlorides and 2-phenoxyterephthalic dihydrazide in N-methyl-2-pyrrolidi-none (NMP). The thermal cyclization of the polyhydrazides gave the corresponding poly(1,3,4-oxadiazole)s containing pendent phenoxy groups. The polymers were characterized by viscometry, solubility measurements, IR spectroscopy, differential scanning calorimetry (DSC) and thermogravimetric analysis.

Zusätzliches Material: 2 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1996.052380106

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

89

Digitale Medien

Effect of electron beam radiation on mechanical and electrical properties of poly(ethylene-co-vinyl acetate) (1996)

Datta, Sujit K. ; Chaki, T. K. ; Khastgir, D.

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 238 (1996), S. 105-117

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Ein Ethylen-Vinylacetat-Copolymeres (EVA) mit 12% Vinylacetat-Gehalt wurde mit Trimethylolpropantrimethacrylat (TMPTMA) als Sensibilisator mit Elektronen bestrahlt. Die mechanischen und elektrischen Eigenschaften der bestrahlten Copolymerproben wurden untersucht. Die Resultate zeigen, daß sich Zugfestigkeit und Bruchdehnung zunächst mit zunehmender Strahlungsdosis verbessern und bei Überschreiten einer optimalen Strahlungsdosis und Sensibilisatorkonzentration wieder verschlechtern. Durch die Bestrahlung wird eine Vernetzung des Polymeren ausgelöst, die auf den sich mit der Strahlungsdosis erhöhenden Gelanteil zurückgeführt wird. Im Vergleich mit den Originalproben nehmen sowohl die Dielektrizitätskonstante als auch der dielektrische Verlustfaktor durch die Elektronenbestrahlung ab.

Notizen: Ethylene-vinyl acetate (EVA) copolymer (12% vinyl acetate content) is subjected to electron beam irradiation using trimethylolpropane trimethacrylate (TMPTMA) as a radiation sensitizer. Mechanical and electrical studies of these irradiated samples show that the strength properties (tensile strength, elongation at break) are increased with radiation dosage up to an optimum radiation dose and sensitizer level above which the properties begin to deteriorate. Crosslinking of the polymer takes place on irradiation which is attributed to an increased gel content with increasing radiation dose. Compared to the original samples both dielectric constant and dielectric loss factor decrease for samples subjected to irradiation.

Zusätzliches Material: 6 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1996.052380110

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

90

Digitale Medien

Homogeneous synthesis of cellulose p-toluenesulfonates in N,N-dimethylacetamide/LiCl solvent system (1996)

Rahn, Kerstin ; Diamantoglou, Michael ; Klemm, Dieter ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 238 (1996), S. 143-163

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Cellulose-p-toluolsulfonsäureester (Cellulosetosylate) lassen sich durch homogene Umsetzung von Cellulose in einer Lösung aus N,N-Dimethylacetamid und LiCl mit Tosylchlorid (Tos-Cl) und Triethylamin in 24 h bei 8°C in hoher Ausbeute und mit minimalem Einbau von Chlordesoxy-Gruppen herstellen. Die unterschiedlichen Celluloseausgangsmaterialien hatten durchschnittliche Polymerisationsgrade von 280 bis 5100. Die Produkte wurden mit Elementaranalyse, 13C-NMR- und FTIR-Spektroskopie und durch Bestimmung der Grenzviskositäten charakterisiert. Die Erhöhung des Molverhältnisses Tos-Cl/Anhydroglucose-Einheit (AGU) von 0.6 auf 9.0 führte zu einem Anstieg des Substitutionsgrades (DS) von 0.4 bis auf einen Maximalwert von 2.3. Die Cellulosetosylate sind in herkömmlichen organischen Lösungsmitteln wie Dimethylsulfoxid (im gesamten DS Bereich) und in N,N-Dimethylacetamid, N,N-Dimethylformamid, Aceton, Tetrahydrofuran und Trichlormethan (in Abhängigkeit von DS) löslich. Durch 13C-NMR-Spektroskopie wurde nachgewiesen, daß die Tosylierung am O-6 Atom der AGU schneller als an den O-2/3 Atomen erfolgt. Die Analyse der korrespondierenden Ioddesoxycellulosen, die durch Umsetzung mit NaI in Acetylaceton synthetisiert wurden, bestätigte dies zusätzlich. Darüber hinaus wurden wichtige Eigenschaften der Cellulosetosylate wie die Stabilität gegenüber Alkali und thermischer Beanspruchung untersucht.

Notizen: Pure cellulose p-toluenesulfonates (tosylates) with an insignificant formation of chlorodeoxy groups were prepared by reacting cellulose dissolved in a solution of N,N-dimethylacetamide and LiCI with tosylchloride (Tos-CI) in the presence of triethylamine within 24 h at 8°C. Various cellulosic starting materials with a degree of polymerization from 280 to 5 100 were used. The samples obtained were characterized by means of elemental analysis, FTIR and 13C NMR spectroscopy, and their intrinsic viscosities. The rise of the molar ratio of Tos-CI/anhydroglucose unit (AGU) from 0.6 to 9.0 leads to an increase in the degree of substitution (DS) from 0.4 up to a maximum value of 2.3. The cellulose tosylates are readily soluble in common organic solvents like dimethyl sulfoxide (within the whole DS range) and in N,N-dimethylacetamide, N,N-dimethylformamide, acetone, tetrahydrofuran and trichloromethane depending on DS. As revealed by 13C NMR spectroscopy a faster tosylation takes place at the O-6 atom of AGU compared with the O-2/3 atoms. This was additionally confirmed by analysis of the corresponding iododeoxy celluloses synthesized with NaI in acetylacetone. Furthermore, some important properties as stability against alkaline and heat were studied as well.

Zusätzliches Material: 8 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1996.052380113

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

91

Digitale Medien

Coating of carbon-fiber surface by silicon carbide via sol-gel mixtures of tetraethyl orthosilicate and phenolic resin (1996)

Tan, Ton That Minh ; Nieu, Nguyen Huu ; Tan, Phan Minh ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 239 (1996), S. 27-32

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Die Herstellung einer SiC-Oberfläche auf Kohlefasern unter Verwendung einer Sol-Gel-Mischung von Tetraethylorthosilikat (TEOS) und Phenolharz wurde untersucht. FTIR- und SEM-Untersuchungen zeigten, daß die SiC-Oberfläche durch carbothermische Reduktion der Sol-Gel-Mischung bei 1 420°C innerhalb von 15-20 min in einer Argon-Atmosphäre gebildet werden kann. Mittels TGA konnte gezeigt werden, daß die SiC-Beschichtung die thermo-oxidative Stabilität der Kohlefasern erhöht. Bei der erreichten SiC-Schichtdicke von 0,47 μm, bei einem C/Si-Verhältnis von 4, zeigt sich keine Beeinflussung der mechanischen Stabilität der Kohlefasern.

Notizen: The preparation of a SiC coating on a carbon fiber surface using a sol-gel mixture of tetraethyl orthosilicat (TEOS) and phenolic resin was studied. FTIR and SEM investigations indicated that the SiC coating can be formed by carbothermal reduction of the sol-gel mixture at 1420°C for 15-20 min in an argon atmosphere. TGA of the coated fiber was also performed, showing that the SiC coating improves the thermooxidative stability of the carbon fiber. With the thickness of the obtained coating of 0.47 μm using a C/Si ratio of 4, this treatment does not affect the carbon fiber strength.

Zusätzliches Material: 3 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1996.052390103

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

92

Digitale Medien

Adhesive properties of some pressure-sensitive adhesive agents containing oligomer additives (1996)

Florián, Štefan ; Novák, Igor

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 239 (1996), S. 55-62

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Diese Mitteilung behandelt den Einfluß von oligomeren Polypropylen- und Polybutylenölen mit unterschiedlichem Molekulargewicht auf die adhäsiven Eigenschaften von ataktischem Polypropylen (aPP) und dessen Mischungen mit einem Styrol-Ethylhexylacrylat-Copolymeren. Die mechanische Adhäsionsarbeit Am von Mischungen, die ataktisches Polypropylen und das Oligomere enthalten, steigt mit dem Molekulargewicht des Oligomeren, was im Fall des Propylenöls signifikanter ist. Im Fall der ternären Mischungen des ataktischen Polypropylens mit dem Styrol-Ethylhexylacrylat-Copolymeren und Oligomeren wird ein Adhäsions-Maximum beobachtet, wenn der Gehalt an Styrol-Ethylhexylacrylat-Copolymeren in der Mischung ungefähr 30 Gew.-% erreicht. Wenn kein Oligomeres in der Mischung vorhanden ist, kann man bei dieser Zusammensetzung ein Adhäsions-Minimum beobachten, was auf die Unverträglichkeit der übrigen Komponenten zurückzuführen ist.

Notizen: This paper deals with the influence of oligomers, namely propylene oil and butylene oil, of different molecular weight on the adhesive properties of atactic polypropylene (aPP) and its mixtures with styrene-2-ethylhexyl acrylate (S-EHA) copolymer. The mechanical work of adhesion Am of the mixture containing atactic polypropylene and oligomer increases with the molecular weight of the oligomer, which was more significant in the case of propylene oil. For ternary mixtures aPP-S-EHA copolymer/oligomer a maximum of adhesion can be observed if the content of the S-EHA copolymer in the mixture reaches about 30 mass-%. In the absence of oligomers in the mixture a minimum of adhesion can be observed for this composition, which can be attributed to the incompatibility of the remaining components.

Zusätzliches Material: 4 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1996.052390106

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

93

Digitale Medien

Untersuchungen zur synthese von poly(butadien-co-propylenoxid) mit einem ziegler-natta-titankatalysatorsystem (1996)

Kaulbach, Ralph ; Gebauer, Ulrich ; Mähner, Christian ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 239 (1996), S. 107-119

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: After comparison of three catalyst systems, i.e. [Nd(Oct)3/Al2Cl3ET3/Al(i-But)3, Ni(Oct)2/BF3OEt2/AlEt3 and Al(i-But)3/I2/TiCl4] the titanium catalyst system was used for the copolymerization of 1,3-butadiene with propylene oxide. The effects of monomer ratio on copolymer composition, conversion, microstructure, molar mass and molar mass distribution as well as of time of polymerization and of the aluminium/titanium ratio were evaluted. The copolymerization parameters were determined according to Kelen-Tüdős as rbutadiene = 0,9 and rpropylene oxide = 3,9. Copolymerization was confirmed by 13C NMR spectroscopy and extract evaluation combined with 1H NMR spectroscopy.

Notizen: Für die Copolymerisation von 1,3-Butadien mit Propylenoxid wurde nach dem Vergleich der drei Katalysatorsysteme Nd(Oct)3/Al2Cl3ET3/Al(i-But)3, Ni(Oct)2/ BF3OEt2/AlEt3 und Al(i-But)3/I2/TiCl4 das Titankatalysatorsystem eingesetzt. Neben dem Einfluß der Monomerzusammensetzung auf den Umsatz, die Microstruktur, die Copolymerzusammensetzung, die Molmassen sowie die Molmassenverteilungen wurden auch die Polymerisationszeit und das Aluminium/Titan-Verhältnis untersucht. Die Copolymerisationsparameter wurden nach Kelen-Tüdős zu rButadien = 0,9 und rPropylenoxid = 3,9 bestimmt. Der Copolymernachweis erfolgte über 13C-NMR-Spektroskopie und Extraktionsuntersuchungen in Verbindung mit 1H-NMR-Spektroskopie.

Zusätzliches Material: 8 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1996.052390110

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

94

Digitale Medien

Phosphorus-containing polyurethanes based on bisphenol A via N-alkylation (1996)

Liaw, Der-Jang ; Lin, Shiuh-Ping

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 239 (1996), S. 191-199

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Beschreibung / Inhaltsverzeichnis: Phosphorhaltige Polyurethane (PU-P) auf der Basis von Bisphenol A wurden durch N-Alkylierung hergestellt und mittels IR- und 1H NMR-Spektroskopie charakterisiert. Physikalische und thermische Eigenschaften dieser Polyurethane wurden mittels Differentialkalorimetrie, Thermogravimetrie, Röntgenbeugung und Untersuchungen der Löslichkeit, der Feuerbeständigkeit (Sauerstoffindex, LOI) und der reduzierten Viskosität bestimmt. Die Glastemperaturen der N-alkylierten Polymeren sanken von 120°C für das Ausgangspolymere bis auf 29°C für das N-alkylierte Polyurethan mit 2 Gew.-% Phosphor. Die Viskosität der N-alkylierten Polyurethane nahm von 0,36 dL g-1 auf 0,24 dL g-1 ab. Die phosphorhaltigen Polyurethane besitzen eine geringere thermische Stabilität und bessere Löslichkeit sowie höhere Feuerbeständlgkeit als das Ausgangspolymere. Die Röntgenstreuexperimente ergaben, daß ein erhöhter Phosphorgehalt der Polyurethane die Kristallinität herabsetzt.

Notizen: Phosporus-containing polyurethanes (PU-P) based on bisphenol A were prepared by N-alkylation. The structures of N-alkylated polyurethanes were characterized by IR and 1H NMR spectra. Physical and thermal properties of the phosphorus-containing polyurethanes were investigated with differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction, tests of solubility, limiting oxygen index (LOI) and reduced viscosity. Tg of the N-alkylated polymers decreased from 120°C for the starting polymer to 29°C of the 2.0 wt.-% phosphorus-containing polyurethanes. The viscosity of N-alkylated polyurethanes also decreased from 0.36 dL g-1 to 0.24 dL g-1. The thermal stability of polyurethanes decreased on the introduction of phosphorus groups. The LOI values of polyurethanes showed that fire resistance of phosphorus-containing polyurethanes was enhanced. X-ray diffraction measurements showed that the increased phosphorus content was accompanied by decreased crystallinity of the polyurethanes. The solubility of PU-P was improved.

Zusätzliches Material: 2 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1996.052390116

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

95

Digitale Medien

Are cured thermoset resins inhomogeneous?Lecture presented at International Symposium on Advanced Network-Polymers, Kansai University (ISANKU), at Kansai University, Suita, Osaka, Japan, on December 5-6, 1995 (1996)

Dušek, Karel

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 240 (1996), S. 1-15

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Notizen: This question was addressed using various methods to monitor the process of curing and state of the final network. Attention was particularly focused on the possible inhomogeneous network formation as a consequence of the crosslinking process. An analysis of experimental data has revealed that some cured resins can be considered as homogeneous as the corresponding uncrosslinked materials. Resins cured by simple stepwise alternating chemistries, with good compatibility of components, usually fulfill the criterion of homogeneity. A family of epoxy resins cured with polyamines belongs to this category. Nodular structures seen by electron microscopy are a result of interaction of the electron beam or etching. Such structures are also observed for uncrosslinked polymers investigated under the same conditions. Formation of inhomogeneities in a number of thermoset systems is due to (a) chainwise mechanism of network formation with fast propagation inducing cyclization and steric volume exclusion and (b) poor compatibility of components of the system made stronger by increasing molecular weights and crosslinking during curing. Networks formed by freeradical polymerization and copolymerization of polyvinyl monomers can serve as an example of crosslinking-driven formation of inhomogeneities.

Zusätzliches Material: 7 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1996.052400101

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

96

Digitale Medien

Design of network polymers by photopolymerizationLecture presented at the “International Symposium on Advanced Network Polymers, Kansai University” (ISANKU), at Kansai Univeristy, Suita, Osaka, Japan, on December 5-6, 1995. (1996)

Crivello, James V.

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 240 (1996), S. 83-90

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Notizen: The base and transition metal catalyzed isomerization of allyl and crotyl ethers affords a facile, high yield route to the preparation of a variety of mono-, di-, and multifunctional 1-propenyl and 1-butenyl ethers. Employing this novel method, monomers containing epoxide, ester, ether carbonate and urethane groups can be prepared from their readily available allyl and crotyl precursors. In general, these monomers display very high reactivity in cationic polymerizations. In our work, we have focused on photoinduced cationic polymerizations of these monomers using diaryliodonium and triarylsulfonium salt photoinitiators. To study these very fast photopolymerizations, extensive use of real-time infrared spectroscopy was made. Employing this technique, the effects of monomer and photoinitiator structure on the rates of polymerization were studied.

Zusätzliches Material: 1 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1996.052400107

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

97

Digitale Medien

Designing elastomer network for desired tire performance characteristics (1996)

Futamura, Shingo

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 240 (1996), S. 137-149

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Notizen: Rubber elasticity is associated with changes in configurational entropy of a long chain. Because the chain cannot change its configuration instantaneously, there is a time delay in deformation to an applied force. This delayed response is the source of viscoelasticity and hysteresis energy loss of elastomer networks. Many tire performance properties are related to the viscoelasticity of tire components. Wet and dry traction of tire is related to the energy loss of the tread material at very high frequencies. On the other hand, rolling resistance of tire is characterized by the energy loss of tread material at relatively low frequencies. The dynamic viscoelastic properties of elastomer network shows characteristic zones on a frequency scale. At very high frequencies the energy loss is controlled by the segmental motions of the polymer chain. At lower frequencies the energy loss is related to the longer range motions of the chain. A series of polymers was synthesized to study the effect of micro- and macro-structure of the polymer on the viscoelastic properties of tread compounds and their tire performance properties. As expected from the theory, the wet traction of the tire was highly correlated to the segmental motions of the chains; namely, the glass transition temperature of the polymer. The energy loss of the compounds at a higher temperature, however, was related to the macrostructure of the polymer chain. Those examples illustrate that the fundamental understanding of the theory of elastomer network allows a tire engineer to obtain the best balance of tire performance characteristics.

Zusätzliches Material: 7 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1996.052400112

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

98

Digitale Medien

Molecular design of novel network polymers (1996)

Endo, Takeshi ; Sanda, Fumio

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 240 (1996), S. 171-180

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Notizen: Cationic, anionic, and radical ring-opening polymerization of spiro and bicyclic monomers, and their application to network polymers have been developed. Bicyclo orthoesters (BOEs), spiro orthoesters (SOEs), and spiro orthocarbonates (SOCs) were polymerized by cationic double ring-opening. Bicyclobis(γ-butyrolactone)s and spirobis(γ-butyrolactone)s were copolymerized with epoxides by anionic alternating ring-opening. Polymers from SOCs bearing exomethylene groups consisted of ring-opened and vinyl polymerized units. The degree of ring-opening of SOCs depended upon the number of rings and steric hindrance. The radical polymerization of vinylcyclopropanone cyclic acetals depended on the ring-size. With the monomers bearing 5- and 6-membered acetal rings, single ring-opened polymers were obtained. With the monomer bearing 7-membered acetal ring, the polymer mainly consisted of double ring-opened unit. These monomers could be crosslinked by bifunctionalization. Poly(cyclic orthoester)s linked by covalent bonds with dithiols to bifunctional SOEs were crosslinked by acid catalysts, and the reversible crosslinking-depolymerization system could be controlled by temperature.

Zusätzliches Material: 1 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1996.052400115

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

99

Digitale Medien

Characterization of polyurethane network elastomers (1996)

Furukawa, Mutsuhisa ; Komiya, Masaru ; Yokoyama, Tetsuo

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 240 (1996), S. 205-211

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Notizen: Polyester urethane network elastomers with incorporated hard segment oligomers have been prepared by poly(ethylene adipate)glycol (PEA), 2,4-tolylene diisocyanate (TDI), and 1,4-butanediol (BD). These hard segment oligomers were hydroxy-terminated oligomers ([BD-TDI]n-BD; n=1,3), obtained by reacting BD with TDI. Concentrations of allophanate as a cross-linking site were determined by the amine degradation method. Hard segment moieties were obtained by a novel selective hydrolysis of soft segments in the elastomers. Molecular weight distributions of hard segment were measured by means of GPC. Mechanical and thermal properties were measured. Dependence of rubber elasticity on physical cross-linking between normal elastomers and the elastomers with incorporated hard segment oligomers were discussed.

Zusätzliches Material: 5 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1996.052400119

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

100

Digitale Medien

Network formation and swelling behavior of photosensitive poly(vinyl alcohol) gels prepared by photogenerated crosslinkingPoster presented at the “International Symposium on Advanced Network-Polymers, Kansai University” (ISANKU), at Kansai University, Suita, Osaka, Japan, on December 5-6, 1995. (1996)

Shindo, Yoichi ; Katagiri, Naoya ; Ebisuno, Toichi ; [weitere]

Weinheim : Wiley-Blackwell

Angewandte Makromolekulare Chemie 240 (1996), S. 231-239

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0003-3146

Schlagwort(e): Chemistry ; Polymer and Materials Science

Quelle: Wiley InterScience Backfile Collection 1832-2000

Thema: Chemie und Pharmazie , Physik

Notizen: Poly (vinyl alcohol) with pendent styrylpyridinium groups (SbQ) is insolubilized by photoirradiation. An association takes place in SbQ groups. The association of polymer chains becomes marked with increasing the number of SbQ groups. Mainly intermolecular crosslinks were formed. Transparent and homogeneous macrogels consisting of several intermolecular crosslinks are obtained.The proportion of the free water to the bound water in PVA-SbQ gels was 3.3-2.9 despite of the large change in conversion of photodimerization of SbQ groups, x=0.27-0.58. The water uptake after swelling of the gels in water increased 6-27 times compared to the original weight at pH=7. The higher the degree of photocrosslinking, the lower was the degree of swelling. The water diffusion coefficients, D, were (2.2-5.8) × 10-5 cm2 S-1 for a 88% saponified PVA with 1 . 3 mol% SbQ groups. The volume of the gel increased discontinuously about 10-fold for the 99% saponified PVA with 0 . 096 mol% SbQ and 51% water (49% acetone). The acetone concentration at the transition decreased with increasing the degree of saponification of the PVA.

Zusätzliches Material: 10 Ill.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1002/apmc.1996.052400122

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext