ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • SPACE VEHICLES  (5,149)
  • Physics  (4,397)
  • STRUCTURAL MECHANICS  (3,499)
  • THERMODYNAMICS AND COMBUSTION  (3,062)
  • 1970-1974  (8,113)
  • 1965-1969  (7,992)
  • 1945-1949  (2)
Collection
Keywords
Publisher
Language
Years
Year
  • 1
    facet.materialart.
    Unknown
    Architecture in outer space (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: Mulilayer thin film structures consisting of systems of shells filled with gas at some pressure are recommended for outer space structures: Large mirrors to collect light and radio waves, protection against meteoric impact and damage, and for connectors between state space stations in the form of orbital rings. It is projected that individual orbital rings will multiply and completely seal a star trapping its high temperature radiation and transforming it into low temperature infrared and short wave radio emission; this radiation energy could be utilized for technological and biological processes.
    Keywords: SPACE VEHICLES
    Type: Inhabited Space, Pt. 2 (NASA-TT-F-820); p 161-169
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 2
    facet.materialart.
    Unknown
    Spacecraft of the future (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: Manned interstellar expeditions require future ion propulsion rocket engines able to achieve a flight velocity of 0.3 times the speed of light, and a closed ecological system onboard the interstellar spacecraft that incorporates biological links and complicated technical facilities to insure long term life support for its crew.
    Keywords: SPACE VEHICLES
    Type: Inhabited Space, Pt. 2 (NASA-TT-F-820); p 135-153
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 3
    facet.materialart.
    Unknown
    Spacecraft (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: The task of building a spacecraft is compared to the construction of an artificial cybernetic system able to acquire and process information. Typical features for future spacecraft are outlined and the assignment of duties in spacecraft control between automatic devices and the crew is analyzed.
    Keywords: SPACE VEHICLES
    Type: Inhabited Space, Pt. 2 (NASA-TT-F-820); p 2-16
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 4
    facet.materialart.
    Unknown
    Noise and vibration level reduction by covering metal structures with layers of damping materials (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: One of the most important methods of reducing the noise and vibration level is the damping of the secondary sources, such as metal plates, often used in vehicle structures, by means of covering materials with high internal viscosity. Damping layers are chosen at an optimum thickness corresponding to the frequency and temperature range in which a certain structure works. The structure's response corresponding to various real situations is analyzed by means of a measuring chain including electroacoustical or electromechanical transducers. The experimental results provide the dependence of the loss factor and damping transmission coefficient as a function of the damping layer thickness or of the frequency for various viscoelastic covering materials.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 246-253
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 5
    facet.materialart.
    Unknown
    Vibration and recoil control of pneumatic hammers (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: Vibration sources are described for pneumatic hammers used in the mining industry (pick hammers), in boiler shops (riveting hammers), etc., bringing to light the fact that the principal vibration source is the variation in air pressure inside the cylinder. The present state of the art of vibration control of pneumatic hammers as it is practiced abroad, and the solutions adopted for this purpose, are discussed. A new type of pneumatic hammer with a low noise and vibration level is presented.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 79-84
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 6
    facet.materialart.
    Unknown
    Vibration control in forge hammers (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: Special measures are discussed for calculating, designing and executing a forge hammer foundation, so that the vibrations that occur during its working will not be transmitted to neighboring machinery, workrooms and offices. These vibrations are harmful to the workers near the forge hammer.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 73-78
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 7
    facet.materialart.
    Unknown
    Experimental determination of the vibration level in 5,100 kW electric locomotive assemblies (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: Because of the high vibration level occurring during the running of electric locomotives, mechanical defects occur in the control mechanisms of auxiliary services. This fact has given rise to the necessity of determining the values of these vibrations in electric locomotives during their running. Measurements were conducted on the Craiova-Drobeta-Turnu Severin line, and measures to reduce the vibration level in electric locomotives were instituted.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 50-54
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 8
    facet.materialart.
    Unknown
    Random vibrations of linear viscoelastic beams with lumped masses (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: A method is presented of determining the mean square transversal deflection of an isotropic and homogeneous linear viscoelastic beam having a certain number of lengthwise distributed lumped masses. It is assumed that the beam is acted upon by a stationary random process uniformly distributed along the beam. The method is useful in vibration level control by means of additional lumped masses.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 36-42
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 9
    facet.materialart.
    Unknown
    Random vibrations of quadratic damping systems (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: An oscillating system with quadratic damping subjected to white noise excitation is replaced by a nonlinear, statistically equivalent system for which the associated Fokker-Planck equation can be exactly solved. The mean square responses are calculated and the optimum damping coefficient is determined with respect to the minimum mean square acceleration criteria. An application of these results to the optimization of automobile suspension damping is given.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 29-35
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 10
    facet.materialart.
    Unknown
    The response of many-storied structures under seismic actions (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: A seismic action which is characterized by the acceleration function of the seismic motion is analyzed. The equations of motion in the direction of the seismic action are determined for a completely rigid ground and for a ground with linear deformability characteristics (rotation deformability). The equation for the rotation motion is derived by considering elastic and viscoelastic properties of the foundation ground. The differential equations are written by treating the mechanical model of a many-storied structure as a fixed vertical beam with a uniformly distributed mass as well as with concentrated masses on each floor.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 43-49
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 11
    facet.materialart.
    Unknown
    Insulation of nonlinear and random vibrations in the mining industry (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: The insulation of nonlinear and random vibrations is considered for some ore preparing and sorting implements: rotary crushers, resonance screens, hammer mills, etc. The appearance of subharmonic vibrations is analyzed, and the conditions for their appearance are determined. A method is given for calculating the insulation of these vibrations by means of elastic elements made of rubber. The insulation of the random vibrations produced by Symons crushers is calculated by determining the transmissability and deformation of the insulation system for a narrow band random response.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 22-28
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 12
    facet.materialart.
    Unknown
    A mathematical model for storied buildings subjected to automatic loom stresses (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: Expressions are derived for the displacements of a many storied building subjected to the action of classical weaving looms located at different levels of the building. The building is regarded as a vertical fixed beam with a uniformly distributed mass as well as concentrated masses at each level. The calculation relations are obtained on the assumption of harmonic variation of the forces acting at each level as well as the assumption of narrow band stationary random excitatory forces.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 15-21
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 13
    facet.materialart.
    Unknown
    Study of vibrations produced by a vibrating beam used for vibrating concretes (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: For compacting concretes in building, vibrating beams are used. The vibrations are generated by inertial vibrators, and the beam is normally displaced by the operator by means of a handle that is elastically fastened to the beam by means of rubber pads. Considered are vibrations transmitted to the operator, taking into account the beam's shock vibration motions. The steady state motion of a dynamic beam pattern is studied, and results of experimental tests with existing equipment are presented.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 9-14
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 14
    facet.materialart.
    Unknown
    Method of calculating gas dynamics and heat transfer in single stage refrigeration units (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: A generalized mathematical model of gas-dynamic and heat transfer processes in single-stage regenerative installations operating in Stirling, MacMahon, Gifford-MacMahon, and pulsating tube cycles is proposed. A numerical method os solving initial equations on a digital computer is given. This makes it possible to calculate the change in the thermodynamic parameters in the working cycle in different machine components, as well as the dependence of cold productivity on the temperature level in the steady regime.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Space Res. in the Ukraine, No. 3 (NASA-TT-F-15537); p 124-138
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 15
    facet.materialart.
    Unknown
    Stresses in dome-shaped shells of revolution with discontinuities at the apex (1974)
    In:  CASI
    Details
    Publication Date: 2006-04-02
    Description: Asymptotic solutions of Novozhilov's equations of shells of revolution are derived for axisymmetric and first harmonic loadings. The solutions obtained are valid throughout the shallow and nonshallow regions. Stresses in dome shaped shells of revolution with a discontinuity in the form of a circular hole, a circular rigid insert, or a nozzle at the apex have been investigated. Numerical results are obtained for spheres, ellipsoids, and paraboloids, containing a discontinuity under a internal pressure and moment. Curves depicting stress distributions are given. The influence of three types of discontinuity on the stresses of the shells is also given.
    Keywords: STRUCTURAL MECHANICS
    Type: Multivariant Function Model Generation; 118 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 16
    facet.materialart.
    Unknown
    Current structural vibration problems associated with noise (1974)
    In:  CASI
    Details
    Publication Date: 2011-10-14
    Description: As the performance of aerospace vehicles has increased, the noise generated by the propulsion system and by the passage of the vehicle through the air has also increased. Further increases in performance are now underway for space vehicles such as the space shuttle vehicle and for short distance takeoff and landing (STOL) aircraft, and are being planned for supersonic aircraft. The flight profiles and design features of these high-performance vehicles are reviewed and an estimate made of selected noise-induced structural vibration problems. Considerations for the prevention of acoustic fatigue, noise transmission, and electronic instrument malfunction are discussed.
    Keywords: STRUCTURAL MECHANICS
    Type: AGARD Noise Mech.; 16 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 17
    facet.materialart.
    Unknown
    Inclusion of transverse shear deformation in finite element displacement formulations (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A stiffness matrix is derived for a beam element with transverse shear deformation. It is shown that straightforward energy minimization yields the correct stiffness matrix in displacement formulations when transverse shear effects are considered. Since the TIM4 beam element does not represent the geometric boundary conditions for a cantilever beam the rotation of the normal must be retained as a grid point degree of freedom.
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 12; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 18
    facet.materialart.
    Unknown
    Measurements of sonic-boom overpressures from Apollo space vehicles (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: This paper presents representative results of sonic-boom overpressure data recorded during the launch and reentry of the Apollo 15 and 16 space vehicle systems. Comparisons are made between measured overpressures and those predicted using available theory. The measurements were obtained along the vehicle ground track at 68, 87, 92, 129, and 970 km downrange from the launch site during ascent, and at 9, 13, 55, 185, and 500 km from the splash-down point during reentry. Also included are tracings of the sonic-boom signatures along with a brief description of the launch and recovery test areas in which the measurements were obtained, the sonic-boom instrumentation deployment, flight profiles and operating conditions, and high-altitude weather information for the general measurement areas.
    Keywords: SPACE VEHICLES
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 19
    facet.materialart.
    Unknown
    The community satellite 1 (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: NASA's Applications Technology Satellite-6 is being used to test a variety of new space communications concepts requiring the use of a geosynchronous-orbit spacecraft. These include broadcast of health and education television programs to small, low-cost ground receiving units in remote regions. Other studies to be conducted are related to aeronautical and maritime communications, position-location, and traffic-control techniques. Questions concerning spacecraft tracking and data relay are also investigated. The 1,402 kg spacecraft consists essentially of an Earth Viewing Module connected to a deployable reflector antenna. Details regarding the planned experiments and the spacecraft design are discussed and a brief history of the ATS program is presented.
    Keywords: SPACE VEHICLES
    Type: Spaceflight; 16; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 20
    facet.materialart.
    Unknown
    Nonequilibrium boundary layer at a stagnation point for a hydrogen-helium stream over ablating graphite (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The nonequilibrium axisymmetric stagnation point boundary layer over an ablating graphite surface is considered. The external stream is a high temperature mixture of hydrogen and helium. Variable thermodynamic and transport properties are assumed. Lennard-Jones potential model is used to calculate the transport coefficients of each species. Although the mixture rules for viscosity of the gas mixture are used, the weighting functions are more sophisticated than those commonly employed. For the conductivity of the mixture, generalized Wassiljewa coefficients are used. Seven species with 28 dissociation/recombination reactions are considered. Hansen's model for the dissociation rate constants is employed. The recombination rate constants are obtained by invoking detailed balance principles assisted by the JANAF thermodynamic data and the Hansen-Pearson thermodynamic data for C3.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Acta Astronautica; 1; Mar
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 21
    facet.materialart.
    Unknown
    Microcraters formed in glass by projectiles of various densities (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An experiment was conducted investigating the effect of projectile density on the structure and size of craters in soda lime glass and fused quartz. The projectiles were spheres of polystyrene-divinylbenzene (PS-DVB), aluminum, and iron with velocities between 0.5 and 15 km/sec and diameters between 0.4 and 5 microns. The projectile densities spanned the range expected for primary and secondary particles of micrometer size at the lunar surface, and the velocities spanned the lower range of micrometeoroid velocities and the upper range of secondary projectile velocities. There are changes in crater morphology as the impact velocity increases, and the transitions occur at lower velocities for the projectiles of higher density. The sequence of morphological features of the craters found for PS-DVB impacting soda lime glass for increasing impact velocity, described in a previous work (Mandeville and Vedder, 1971), also occurs in fused quartz and in both targets with the more dense aluminum and iron projectiles. Each transition in morphology occurs at impact velocities generating a certain pressure in the target. High density projectiles require a lower velocity than low-density projectiles to generate a given shock pressure.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Geophysical Research; 79; Aug. 10
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 22
    facet.materialart.
    Unknown
    Effect of wall temperature spatial variations on aerodynamic heating to an actively cooled aircraft (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The design of cooled skin panels, which requires consideration of many parameters such as heat load, skin thickness, panel size, tube spacing, tube size, temperature limits, coolant flow, etc., must minimize weight and thermal stresses. A design procedure for such panels has been developed by Bell Aerospace Company (Helenbrook and Anthony, 1971). This design procedure assumes a uniform heating rate to the panel, i.e., the variation of aerodynamic heating rate due to the cyclic wall temperature distribution, which results from the discrete coolant tube locations in such a panel, has been neglected. This study was made to determine if these variations were sufficiently large to cause variations in aerodynamic heating rate which would require coupling of boundary layer and conductive thermal analysis solutions.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Journal of Aircraft; 11; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 23
    facet.materialart.
    Unknown
    Approximate techniques of structural reanalysis (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A study is made of two approximate techniques for structural reanalysis. These include Taylor series expansions for response variables in terms of design variables and the reduced-basis method. In addition, modifications to these techniques are proposed to overcome some of their major drawbacks. The modifications include a rational approach to the selection of the reduced-basis vectors and the use of Taylor series approximation in an iterative process. For the reduced basis a normalized set of vectors is chosen which consists of the original analyzed design and the first-order sensitivity analysis vectors. The use of the Taylor series approximation as a first (initial) estimate in an iterative process, can lead to significant improvements in accuracy, even with one iteration cycle. Therefore, the range of applicability of the reanalysis technique can be extended. Numerical examples are presented which demonstrate the gain in accuracy obtained by using the proposed modification techniques, for a wide range of variations in the design variables.
    Keywords: STRUCTURAL MECHANICS
    Type: Computers and Structures; 4; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 24
    facet.materialart.
    Unknown
    Development of large earth orbital space station (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: This paper outlines the major aspects of the development of large earth orbital space stations. At the outset, the uses of the space station are surveyed and the major systems and configurational drivers enumerated. A representative 12-man space station, studied by the Space Division of North American Rockwell Corporation under NASA contract is described. The subsequent discussion centers around earth-to-orbit logistics and possible future missions with emphasis on the establishment of a branch station geosynchronous orbit. In dealing with the associated transportation between low and high orbits, the concept of a geospace shuttle station oscillating between near-earth and synchronous orbit is compared with conventional shuttle vehicles with chemical and nuclear propulsion. In the final part, the evolution of the 12-man space station to a larger space base is described.
    Keywords: SPACE VEHICLES
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 25
    facet.materialart.
    Unknown
    Finite-amplitude thermal convection in a spherical shell (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The properties of finite-amplitude thermal convection for a Boussinesq fluid contained in a spherical shell are investigated. All nonlinear terms are retained in the equations, and both axisymmetric and nonaxisymmetric solutions are studied. The velocity is expanded in terms of poloidal and toroidal vectors. Spherical surface harmonics resolve the horizontal structure of the flow, but finite differences are used in the vertical. With a few modifications, the transform method developed by Orszag (1970) is used to calculate the nonlinear terms, while Green's function techniques are applied to the poloidal equation and diffusion terms.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Journal of Fluid Mechanics; 63; May 15
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 26
    facet.materialart.
    Unknown
    Static, stability, and dynamic analysis of shells of revolution by numerical integration - A comparison (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Recent innovations in digital computer technology have enabled engineers to analyze shell structures of complex configurations without unduly restrictive approximations. An attempt is made to compare the various programs now generally available from the point of view of the advantages of the relative technique utilized, as well as the programmed state of the art. Many of the comparisons are based on the sample problems solved by the STARS-2 system of programs. These examples indicate both the structural detail which can be analyzed by, and the analytical capabilities available in, the numerical shell-of-revolution programs. All advantages and differences are demonstrated by use of solutions for realistic shell problems in the areas of statics, stability, vibrations, and dynamic response of shells subjected to time-dependent loadings.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 27
    facet.materialart.
    Unknown
    Forced vibrations of multi-component compliant tanks and feedlines (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An analytical and experimental research program was performed to investigate the effects of flexible tanks and lines and the total system dynamic response of a simple physical system which had some of the essential features of a liquid-fueled launch vehicle. Several vessel-wall materials were used to obtain a range of elastic moduli. Water was used to simulate the fuel and an electromagnetic shaker provided external excitation such as might originate from a rocket-propulsion system. Experimental data were compared to values obtained from mathematical models for the many degree-of-freedom lumped-mass representation.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 28
    facet.materialart.
    Unknown
    On the propagation velocity of a detonation-shock combined wave (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A quasi-one-dimensional analysis and a generalized Chapman-Jouguet condition are developed for a gaseous free detonation in an inert environment. Two characteristic features derived from the results are that there exists a lower limit on the heat of combustion, the charge diameter, and the molecular weight of the ambient gas and that there are two propagation velocities for a parameter combination above a certain critical value. Therefore the detonation failure of a free gas column is a hydrodynamic rather than a chemical phenomenon.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Zeitschrift fuer angewandte Mathematik und Mechanik; 54; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 29
    facet.materialart.
    Unknown
    Nonproportional loading limit for structures (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The design of most structures involves ensuring integrity for several independent loading conditions. Often, it is rational to design these, exploiting the ductility of the materials to reduce structural costs. Then, ensuring integrity evokes the need for nonmonotonic limit analyses. A groundwork is laid for implementing these analyses. An alternate limit load characterization to that of Greenberg is provided, a mathematical statement of the problem leading to both monotonic (proportional) and nonmonotonic limit loads values is formulated, a direct limit load analysis procedure for analysis within a finite-element framework is described, and limit loads for sets of simple structures are evaluated. A direct limit analysis process is described, and monotonic limit loads are characterized. The process furnishes 'exact' values of limit loads with increasing efficiency as the number of structural elements and force redundancy decreases. Tests show that the accuracy of predicting nonmonotonic limit loads is very sensitive to the number of degrees of freedom in the analysis compared with the total number in the model.
    Keywords: STRUCTURAL MECHANICS
    Type: Computers and Structures; 4; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 30
    facet.materialart.
    Unknown
    Swept-slot film-cooling effectiveness in hypersonic turbulent flow (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Measurement results are presented for the surface equilibrium temperature downstream of swept slots, with sonic tangential air injection into a thick hypersonic turbulent boundary layer. These results are compared with unswept slot results for cooling effectiveness.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Journal of Spacecraft and Rockets; 11; May 1974
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 31
    facet.materialart.
    Unknown
    Mean flow development and surface heating for an attaching compressible free shear layer (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Journal of Spacecraft and Rockets; 11; May 1974
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 32
    facet.materialart.
    Unknown
    Adhesive fracture mechanics (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: In studies of fracture mechanics the adhesive fracture energy is regarded as a fundamental property of the adhesive system. It is pointed out that the value of the adhesive fracture energy depends on surface preparation, curing conditions, and absorbed monolayers. A test method reported makes use of a disk whose peripheral part is bonded to a substrate material. Pressure is injected into the unbonded central part of the disk. At a certain critical pressure value adhesive failure can be observed. A numerical stress analysis involving arbitrary geometries is conducted.
    Keywords: STRUCTURAL MECHANICS
    Type: International Journal of Fracture; 10; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 33
    facet.materialart.
    Unknown
    Space Shuttle - The new baseline (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Recent design alterations and refinements in the Space Shuttle program are considered with particular attention to the present baseline Shuttle configurations, performance characteristics, mission profiles, and flight and ground operations. Hardware and software development and testing, propulsion systems, entry trajectory events, and payload capability are covered. The refined Space Shuttle system design is characterized as one reflecting firm technical and economic considerations. Systems development is well under way, with all major contractors progressing on schedule.
    Keywords: SPACE VEHICLES
    Type: Astronautics and Aeronautics; 12; Jan. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 34
    facet.materialart.
    Unknown
    New triangular plate-bending finite element with transverse shear flexibility (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 12; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 35
    facet.materialart.
    Unknown
    Evolution of the heat transfer and flow in moderately short turbulent boundary layers in severe pressure gradients (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: International Journal of Heat and Mass Transfer; 17; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 36
    facet.materialart.
    Unknown
    Interactive design of large end rings on stiffened conical shells using composites (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Design study methods and results for a composite reinforced base ring for the conical aeroshell structure of the planetary lander vehicle for Project Viking, an unmanned mission to Mars, are presented. The aeroshell is a ring and stringer-stiffened conical shell structure having a half angle of 70 degrees with a large base ring mounted at the outer edge of the cone and a large pay-load ring in the interior with many smaller rings spaced along the inside shell surface. The purpose of the structure is to develop the aerodynamic drag required to decelerate the lander in the Mars atmosphere to facilitiate a soft landing. The design of a shell structure of this complexity requires the use of the latest technology available in a large general-purpose shell buckling program. The large general-purpose non-linear shell buckling program (BOSOR 2) which was used for this purpose is described.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 37
    facet.materialart.
    Unknown
    Stability of a dual-spin satellite with two dampers (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The rotational stability of a dual-spin satellite consisting of a main body and a symmetric rotor, both spinning about a common axis, is investigated. The main body is equipped with a spring-mass damper, while a partially filled viscous ring damper is mounted on the rapidly spinning rotor. The effect of fluid motion on the rotational stability of the satellite is calculated, considering the fluid as a single particle moving in a tube with viscous damping. Time constants are obtained by solving approximate equations of motion for the nutation-synchronous and the spin-synchronous modes, and the results are found to agree well with the numerical integrations of the exact equations. A limit cycle may exist for some configurations; the nutation angle tends to increase in such cases.
    Keywords: SPACE VEHICLES
    Type: Journal of Spacecraft and Rockets; 11; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 38
    facet.materialart.
    Unknown
    Aerodynamic heat transfer to RSI tile surfaces and gap intersections (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Review of the results of aerothermal heating tests of a simulated reusable surface insulation (RSI) tile array, performed on the sidewall of a Mach-10 hypersonic tunnel. In particular, the heating characteristics of the tile array, such as they result from heating inside the tile-expansion-space providing gaps between individual tiles, are investigated. The results include the finding that heating on the upstream face of a tile is strongly affected by the interacting longitudinal gap flow.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Journal of Spacecraft and Rockets; 11; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 39
    facet.materialart.
    Unknown
    Nonlinear unsteady contact heat conduction of two-layer shells in the presence of thermal radiation (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A technique is proposed for calculating the complex heat transfer of mated shells with the surrounding medium which also takes into account the temperature dependence of the contact thermal resistance between the shells. This technique can be used for thermal calculations and for calculations of the temperature stresses in two-layer space structure shells.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Space Studies in the Ukraine, No. 1 (NASA-TT-F-15535); p 169-177
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 40
    facet.materialart.
    Unknown
    Radiative cooling of bodies of arbitrary shape and variable volume in vacuum (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: On the basis of joint application of the Tolubinskii integral method and the perturbation method, the asymptotic unsteady temperature distribution is constructed for a region of arbitrary shape on the moving boundary of which there are located nonlinear heat sinks (sources), describing radiative cooling in a medium with zero temperature (in a vacuum).
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Space Studies in the Ukraine, No. 1 (NASA-TT-F-15535); p 160-168
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 41
    facet.materialart.
    Unknown
    Heat transfer with nucleate boiling of liquids under weak mass force field conditions (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The motion is examined of a vapor bubble growing and rising from a flat horizontal heater in the ideal fluid approximation and taking drag into account. Estimates are given of bubble lifetime, bubble radius at detachment, bubble detachment frequency, and time for the bubble to attain a constant rate of rise. The relations obtained for the microcharacteristics of the boiling process are used to determine the coefficients of heat transfer in developed nucleate boiling. A new form of the equations for describing heat transfer in nucleate boiling in dimensionless parameters is proposed.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Space Studies in the Ukraine, No. 1 (NASA-TT-F-15535); p 131-159
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 42
    facet.materialart.
    Unknown
    Thermocapillary convection in weightless condition (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Results are presented of studies on thermocapillary instability of a liquid in a spherical layer with free surface and convection in a rectangular channel with horizontal temperature gradient. It is shown that in vessels partly filled with a viscous incompressible fluid and under essentially weightless conditions free convection may arise due to the surface tension temperature dependence.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Space Studies in the Ukraine, No. 1 (NASA-TT-F-15535); p 121-130
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 43
    facet.materialart.
    Unknown
    Transient cooling of solid bodies of classical form by radiation (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An approximate analytic method is presented for analysis of the unsteady process of radiative cooling of solid bodies of classical form. The nonlinear heat transfer problem is solved by the cascade linearization technique with use of the iteration method. Comparison of the results obtained even in the first approximation with the available numerical solutions indicates adequate engineering accuracy of the proposed technique.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Space Studies in the Ukraine, No. 1 (NASA-TT-F-15535); p 113-120
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 44
    facet.materialart.
    Unknown
    Thermal regime and temperature stresses in bodies during thermoradiational heating (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An approach is developed to the application of the perturbation method for the solution of problems with essential external nonlinearities, based on identification in the boundary condition of a small nonlinear complex which is considered a perturbing function. The solutions obtained in the first approximation with error of 1 to 2% in calculating the unsteady temperature fields are then used to determine the temperature stresses and deformations in solid bodies of classical form.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Space Studies in the Ukraine, No. 1 (NASA-TT-F-15535); p 88-98
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 45
    facet.materialart.
    Unknown
    Boundary value problems with incremental plasticity in granular media (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Discussion of the critical state concept in terms of an incremental theory of plasticity in granular (soil) media, and formulation of the governing equations which are convenient for a computational scheme using the finite element method. It is shown that the critical state concept with its representation by the classical incremental theory of plasticity can provide a powerful means for solving a wide variety of boundary value problems in soil media.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 46
    facet.materialart.
    Unknown
    A solution to the contact of two rough spherical surfaces (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The influence of roughness on the interfacial pressure distribution in the contact of two spherical surfaces is considered. An approximate general solution is presented and it is shown that the pressure for all radii can be determined solely from a reference pressure which is, in turn, a function of two parameters - a dimensionless roughness and a dimensionless hardness. Values for the radius of contact are also presented.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 47
    facet.materialart.
    Unknown
    Mars surface-to-orbit vehicles for sample return missions (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Review of the results of a Mars surface-to-orbit launch vehicle study using an upgraded atmospheric density profile and an ascent trajectory optimization program. Orbit insertion was achieved with velocity losses less than those found in an earlier study. Values of thrust-to-mass ratio which minimize velocity losses for dual-burn vehicles were found to be significantly greater than the values of thrust-to-launch-mass ratio for the minimum-velocity-loss continuous-burn vehicle. The use of a two-stage solid-propellant vehicle employing a spin-stabilized second stage offers an attractive design option for a Mars surface-to-orbit launch vehicle.
    Keywords: SPACE VEHICLES
    Type: Journal of Spacecraft and Rockets; 11; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 48
    facet.materialart.
    Unknown
    Mixed mode stress field effect in adhesive fracture (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Numerical or analytical analyses were performed on seven different test specimens including blister test, 90-degree peel test, torsion test, and various cone tests. These specimens are in general subjected to complex stress fields having various amounts of Mode I, Mode II, and Mode III loads. The specimens were then constructed using polymethyl methacrylate for the adherends and a transparent polyurethane elastomer (Solithane 113) for the adhesive. This combination permitted direct observation of the bondline as load was applied. Although initial debonds as well as bond end termination singularities were present in all specimens, in some cases the debond did not initiate at the singularity points as would normally have been expected. An explanation for this behavior is presented, as well as a comparison of loading mode effect on those specimens for which the debond did propagate from a bond terminus singular point.
    Keywords: STRUCTURAL MECHANICS
    Type: International Journal of Fracture; 10; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 49
    facet.materialart.
    Unknown
    Dependence of plate-bending finite element deflections and eigenvalues on Poisson's ratio (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 12; Oct. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 50
    facet.materialart.
    Unknown
    Fracture initiation and propagation in a cylindrical shell containing an initial surface flaw (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An attempt is made to provide the necessary analytical tools for the application of two different types of fracture criteria to shell structures. Of particular interest is the problem of fracture propagation and arrest in a cylindrical pressure vessel containing an initial surface flaw. It is assumed that the flaw has the most unfavorable geometry and orientation, namely, it is a crack lying on a meridional plane. Stress intensity factor for a part-through crack, and a surface or internal crack with a fully yielded net ligament are considered. Attention is given to constant delta curves for depressurization studies and to depressurization and crack arrest in pressure vessels.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 51
    facet.materialart.
    Unknown
    ERTS-1, the spacecraft and its sensors (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The basic objectives of the ERTS-1 mission are defined as follows: (1) to determine what data can be acquired from an orbiting satellite on the natural and cultural resources and on the environment; and (2) to develop and demonstrate the combination of data-acquisition procedures and interpretative techniques which can make this new knowledge available for use in the many facets of man's life. A general description of the satellite's observatory system and its sensors is given, including the thermal control subsystem, the power subsystem, the attitude control subsystem, the orbit adjust subsystem, the telemetry and tracking systems, the communications and data handling subsystem, the return beam vidicon subsystem, the multispectral scanner subsystem, the two wideband video tape recorders, and the data collection subsystem.
    Keywords: SPACE VEHICLES
    Type: Journal of Environmental Sciences; 17; Mar
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 52
    facet.materialart.
    Unknown
    Skylab 1 and 2 - Pilots' report (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Details of powered flight are considered, giving attention to the lift-off, engine thrust, and separation from the S-1VB stage. The rendezvous checklist was performed on time and exactly prior to the first phasing maneuver. The Command Service Module was finally maneuvered to a position for hard docking. Attention is given to aspects of extravehicular activity during the mission and delays experienced in the separation procedure.
    Keywords: SPACE VEHICLES
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 53
    facet.materialart.
    Unknown
    Pioneer 10 (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: On Dec. 4, 1973, after 21 months in flight, Pioneer 10 passed by Jupiter at a distance within 130,000 km of its cloud tops. During the month before and after, instrumentation on the spacecraft made a number of scientific measurements of the Jupiter environment, thus completing one of three scientific objectives of the mission. Previously, Pioneer 10 had explored the asteroid belt and had completed the second scientific objective by determining that the belt did not present a hazard to spacecraft passing through it. The third objective, the exploration of interplanetary phenomena, started with the launch of Pioneer 10 and will not be completed until 1977 when the spacecraft nears the orbit of Uranus and the signal from the spacecraft becomes too weak to be heard at ground receivers.
    Keywords: SPACE VEHICLES
    Type: Science; 183; Jan. 25
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 54
    facet.materialart.
    Unknown
    An overview of high temperature metal fatigue: Aspects covered by the 1973 International Conference on Creep and Fatigue (1974)
    In:  CASI
    Details
    Publication Date: 2012-05-22
    Description: A summary of papers is presented which covers the following broad aspects of high temperature metal fatigue: (1) materials development and characterization; (2) environmental factors, including air, vacuum, helium, iodine, sodium, and radiation environments; (3) general fatigue life relationships; (4) crack growth laws; (5) design code activities; and (6) design and service experience. Illustrative tables accompany the summary.
    Keywords: STRUCTURAL MECHANICS
    Type: AGARD Low Cycle High Temp. Fatigue; 47 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 55
    facet.materialart.
    Unknown
    Identification of structural parameters from helicopter dynamic test data (1974)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A method is presented for obtaining the mass, stiffness, and damping parameters of a linear mathematical model, having fewer degrees of freedom than the structure it represents, directly from dynamic response measurements on the actual helicopter without a priori knowledge of the physical characteristics of the fuselage. The only input information required in the formulation is the approximate natural frequency of each mode and mobility data measured proximate to these frequencies with sinusoidal force excitation applied at only one point on the vehicle. The practicality and numerical soundness of the theoretical development was demonstrated through a computer simulation of an experimental program.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Ames Res. Center Rotorcraft Dyn.; p 239-248
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 56
    facet.materialart.
    Unknown
    Application of antiresonance theory to helicopters (1974)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Antiresonance theory is the principle underlying nonresonant nodes in a structure, and covers both nonresonant nodes occurring naturally and those introduced by devices such as dynamic absorbers and antiresonant isolators. The dynamic antiresonant vibration isolator (DAVI) and the nodale module are examples of the applications of transfer antiresonances. It is shown that antiresonances are eigenvalues, and that they can be determined by matrix iteration. Applications of antiresonance theory to helicopter engineering problems, using the antiresonant eigenvalue equation are suggested.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Ames Res. Center Rotorcraft Dyn.; p 101-106
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 57
    facet.materialart.
    Unknown
    Correlation of finite-element structural dynamic analysis with measured free vibration characteristics for a full-scale helicopter fuselage (1974)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The correlation achieved with each program provides the material for a discussion of modeling techniques developed for general application to finite-element dynamic analyses of helicopter airframes. Included are the selection of static and dynamic degrees of freedom, cockpit structural modeling, and the extent of flexible-frame modeling in the transmission support region and in the vicinity of large cut-outs. The sensitivity of predicted results to these modeling assumptions are discussed. Both the Sikorsky Finite-Element Airframe Vibration analysis Program (FRAN/Vibration Analysis) and the NASA Structural Analysis Program (NASTRAN) have been correlated with data taken in full-scale vibration tests of a modified CH-53A helicopter.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Ames Res. Center Rotorcraft Dyn.; p 67-80
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 58
    facet.materialart.
    Unknown
    Space processing experiments on sounding rockets (1974)
    In:  Other Sources
    Details
    Publication Date: 2019-01-25
    Description: The use of sounding rockets for the conduct of, and verification of, processing experiments and techniques under conditions of weightlessness are summarized. The experimental payloads, project management, mission schedules are also discussed.
    Keywords: SPACE VEHICLES
    Type: Proc. of the 3d Space Processing Symp. on Skylab Results, Vol. 2; p 565-579
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 59
    facet.materialart.
    Unknown
    SERT D spacecraft study (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The SERT D (Space Electric Rocket Test - D) study defines a possible spacecraft project that would demonstrate the use of electric ion thrusters for long-term (5 yr) station keeping and attitude control of a synchronous orbit satellite. Other mission objectives included in the study were: station walking to satellite rendezvous and inspection, use of low cost attitude sensing system, use of an advanced solar array orientation and slip ring system, and an ion thruster integrated directly with a solar array power source. The SERT D spacecraft, if launched, will become SERT 3 the third space electric thruster test.
    Keywords: SPACE VEHICLES
    Type: NASA-TM-X-71494
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 60
    facet.materialart.
    Unknown
    Transonic single-mode flutter and buffet of a low aspect ratio wing having a subsonic airfoil shape (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Transonic flutter and buffet results obtained from wind-tunnel tests of a low aspect ratio semispan wing model are presented. The tests were conducted to investigate potential transonic aeroelastic problems of vehicles having subsonic airfoil sections. The model employed NACA 00XX-64 airfoil sections in the streamwise direction and had a 14 deg leading edge sweep angle. Aspect ratio, and average thickness were 4.0, 0.35, and 8 percent, respectively. The model was tested at Mach numbers from 0.6 to 0.95 at angles of attack from 0 deg to 15 deg. Two zero lift flutter conditions were found that involved essentially single normal mode vibrations. With boundary layer trips on the model, flutter occurred in a narrow Mach number range centered at about Mach 0.90. The frequency and motion of this flutter were like that of the first normal mode vibration. With the trips removed flutter occurred at a slightly high Mach number but in a mode strongly resembling that of the second normal mode.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-TN-D-7346 , A-4966
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 61
    facet.materialart.
    Unknown
    Transverse vibrations of non-uniform beams (1974)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: The free vibrations of elastic beams with nonuniform characteristics are investigated theoretically by a new method. The new method is seen to combine the advantages of a finite element approach and of a Rayleigh-Ritz analysis. Comparison with the known analytical results for uniform beams shows good convergence of the method for natural frequencies and modes. For internal shear forces and bending moments, the rate of convergence is less rapid. Results from experiments conducted with a cantilevered helicopter blade with strong nonuniformities and also from alternative theoretical methods, indicate that the theory adequately predicts natural frequencies and mode shapes. General guidelines for efficient use of the method are presented.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Sound and Vibration; 37; Dec. 22
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 62
    facet.materialart.
    Unknown
    Apollo experience report: Thermal protection subsystem (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The Apollo command module was the first manned spacecraft to be designed to enter the atmosphere of the earth at lunar-return velocity, and the design of the thermal protection subsystem for the resulting entry environment presented a major technological challenge. Brief descriptions of the Apollo command module thermal design requirements and thermal protection configuration, and some highlights of the ground and flight testing used for design verification of the system are presented. Some of the significant events that occurred and decisions that were made during the program concerning the thermal protection subsystem are discussed.
    Keywords: SPACE VEHICLES
    Type: NASA-TN-D-7564 , JSC-S-383
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 63
    facet.materialart.
    Unknown
    Full wave modulator-demodulator amplifier apparatus (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A full-wave modulator-demodulator apparatus is described including an operational amplifier having a first input terminal coupled to a circuit input terminal, and a second input terminal alternately coupled to the circuit input terminal. A circuit is ground by a switching circuit responsive to a phase reference signal and the operational amplifier is alternately switched between a non-inverting mode and an inverting mode. The switching circuit includes three field-effect transistors operatively associated to provide the desired switching function in response to an alternating reference signal of the same frequency as an AC input signal applied to the circuit input terminal.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 64
    facet.materialart.
    Unknown
    Heat transfer to surface and gaps of RSI tile arrays in turbulent flow at Mach 10.3 (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Heat transfer to gap walls and surface of a simulated reusable surface insulation (RSI) tile array are presented. The data were obtained in the thick, turbulent tunnel wall boundary layer of the Langley Continuous Flow Hypersonic Tunnel at a freestream Mach number of 10.3 and a freestream unit Reynolds number of one million. Pertinent test variables were: (1) tile array orientation (staggered and in-line), (2) gap width, (3) flow angularity, and (4) tile mismatch.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: NASA-TM-X-71945
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 65
    facet.materialart.
    Unknown
    Non-linear behavior of fiber composite laminates (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The non-linear behavior of fiber composite laminates which results from lamina non-linear characteristics was examined. The analysis uses a Ramberg-Osgood representation of the lamina transverse and shear stress strain curves in conjunction with deformation theory to describe the resultant laminate non-linear behavior. A laminate having an arbitrary number of oriented layers and subjected to a general state of membrane stress was treated. Parametric results and comparison with experimental data and prior theoretical results are presented.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-CR-2313 , TFR/7309
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 66
    facet.materialart.
    Unknown
    Failure criteria for viscoelastic materials (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Research projects concerned with developing a theory of fracture of materials are discussed. The effects of the geometry of the structure and the loads acting on the structure as they influence the failure process are analyzed. The effects of the viscoelastic deformation characteristics of the bulk elastomer on failure behavior are examined. Additional material parameters which control the fracture process are identified.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-CR-138125 , GALCIT-120
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 67
    facet.materialart.
    Unknown
    Computer-aided space shuttle orbiter wing design study (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An analytical and experimental investigation has been made to provide a space shuttle orbiter wing design that met the guideline requirements of landing performance, stability, and hypersonic trim for a specified center-of-gravity envelope. The analytical study was facilitated by the use of the Optimal Design Integration system (ODIN) and the experimental part of the investigation was conducted in the Langley low-turbulence pressure tunnel and the Langley continuous-flow hypersonic tunnel.
    Keywords: SPACE VEHICLES
    Type: NASA-TN-D-7478 , L-9099
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 68
    facet.materialart.
    Unknown
    Centaur Standard Shroud (CSS) full jettison test dynamic analysis (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: During the space power facility jettison tests, the non-domed half of the Centaur standard shroud was allowed to completely separate from its hinge connection and was caught in a horizontal catch net. A rigid body dynamic analysis that was performed to predict the half shroud prior to and after net contact is presented. Analytical predictions of the longitudinal and circumferential bending moments imposed on the half shroud by the catch net and the net pressure on the half shroud corrugated skin are also presented.
    Keywords: SPACE VEHICLES
    Type: NASA-TM-X-71537 , E-7943
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 69
    facet.materialart.
    Unknown
    Advance development of a technique for characterizing the thermomechanical properties of thermally stable polymers (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The torsional braid experiment has been interfaced with a centralized hierarchical computing system for data acquisition and data processing. Such a system, when matched by the appropriate upgrading of the monitoring techniques, provides high resolution thermomechanical spectra of rigidity and damping, and their derivatives with respect to temperature.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-CR-138123
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 70
    facet.materialart.
    Unknown
    Removal of spacecraft-surface particulate contaminants by simulated micrometeoroid impacts (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A series of hypervelocity impacts has been conducted in an exploding lithium-wire accelerator to examine with a far-field holographic system the removal of particulate contaminants from external spacecraft surfaces subjected to micrometeoroid bombardment. The impacting projectiles used to simulate the micrometeoroids were glass spheres nominally 37 microns in diameter, having velocities between 4 and 17 km/sec. The particulates were glass spheres nominally 25, 50, and 75 microns in diameter which were placed on aluminum targets. For these test, particulates detached had velocities that were log-normally distributed. The significance of the log-normal behavior of the ejected-particulate velocity distribution is that the geometric mean velocity and the geometric standard deviation are the only two parameters needed to model completely the process of particles removed or ejected from a spacecraft surface by a micrometeoroid impact.
    Keywords: SPACE VEHICLES
    Type: NASA-TN-D-7494 , L-9269
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 71
    facet.materialart.
    Unknown
    Apollo experience report the command and service module milestone review process (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The sequence of the command and service module milestone review process is given, and the Customer Acceptance Readiness Review and Flight Readiness Review plans are presented. Contents of the System Summary Acceptance Documents for the two formal spacecraft reviews are detailed, and supplemental data required for presentation to the review boards are listed. Typical forms, correspondence, supporting documentation, and minutes of a board meeting are included.
    Keywords: SPACE VEHICLES
    Type: NASA-TN-D-7599 , JSC-S-389
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 72
    facet.materialart.
    Unknown
    Results of investigations on a 0.010-scale model of the configuration 3 space shuttle orbiter and external tank in the NASA/Ames Research Center 3.5-foot hypersonic wind tunnel (IA15) (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Experimental aerodynamic investigations were conducted in a 3.5-foot hypersonic wind tunnel. The model used for this test was a 0.010-scale of the Configuration 2 Space Shuttle Orbiter and the External Tank. Six-component aerodynamic force and moment data were recorded over an angle of attack range from -8 deg to +30 deg at 0 deg and 5 deg angles of sideslip. Data was also recorded during beta sweeps of -8 deg to +10 deg at angles of attack of -10 deg, 0 deg, and 30 deg. All testing was done at Mach 7.3. Various elevon, rudder and orbiter to external tank attaching structures and fairings were tested to determine longitudinal and lateral-directional stability characteristics. Non-metric exhaust plumes were installed during a portion of the testing to determine the effects of the main propulsion system rocket plumes.
    Keywords: SPACE VEHICLES
    Type: NASA-CR-134089 , DMS-DR-2102
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 73
    facet.materialart.
    Unknown
    Feasibility of space disposal of radioactive nuclear waste. 2: Technical summary (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The feasibility of transporting radioactive waste produced in the process of generating electricity in nuclear powerplants into space for ultimate disposal was investigated at the request of the AEC as a NASA in-house effort. The investigation is part of a broad AEC study of methods for long-term storage or disposal of radioactive waste. The results of the study indicate that transporting specific radioactive wastes, particularly the actinides with very long half-lives, into space using the space shuttle/tug as the launch system, appears feasible from the engineering and safety viewpoints. The space transportation costs for ejecting the actinides out of the solar system would represent less than a 5-percent increase in the average consumer's electric bill.
    Keywords: SPACE VEHICLES
    Type: NASA-TM-X-2912 , E-7676
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 74
    facet.materialart.
    Unknown
    Bio-isolated dc operational amplifier (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A bio-isolated dc operational amplifier is described for use in making bioelectrical measurements of a patient while providing isolation of the patient from electrical shocks. The circuit contains a first operational amplifier coupled to the patient with its output coupled in a forward loop through a first optic coupler to a second operational amplifier. The output of the second operational amplifier is coupled to suitable monitoring circuitry via a feedback circuit including a second optic coupler to the input of the first operational amplifier.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 75
    facet.materialart.
    Unknown
    LC-oscillator with automatic stabilized amplitude via bias current control (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A stable excitation supply for measurement transducers is described. It consists of a single-transistor oscillator with a coil connected to the collector and a capacitor connected from the collector to the emitter. The output of the oscillator is rectified and the rectified signal acts as one input to a differential amplifier; the other input being a reference potential. The output of the amplifier is connected at a point between the emitter of the transistor and ground. When the rectified signal is greater than the reference signal, the differential amplifier produces a signal of polarity to reduce bias current and, consequently, amplification.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 76
    facet.materialart.
    Unknown
    Analysis of laminated, composite, circular cylindrical shells with general boundary conditions (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: This report develops: (1) a refined approximate theory for the static and dynamic analyses of finite, laminated, composite, circular cylindrical shells with general boundary conditions; (2) an exact three-dimensional analysis of simply supported, laminated, composite, circular cylindrical shells, and (3) a thin-shell theory for laminated, composite, circular cylindrical shells. In the refined approximate theory the displacements are assumed piecewise linear across the thickness and the effects of transverse shear deformations and transverse normal stress are included. A variational approach is followed to obtain the governing differential equations and boundary conditions. A general solution of the governing differential equations is also presented. The results obtained by using the refined approximate theory and the thin-shell theory are compared with the exact results for the case of free vibrations of simply supported, laminated, composite, circular cylindrical shells. The refined approximate theory is very accurate, even for thick shells with short nodal distances, whereas thin-shell theory is reasonably accurate only for thin shells at moderate nodal distances and wave number less than 2.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-TR-R-412 , L-8828
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 77
    facet.materialart.
    Unknown
    Comparison of cooling effectiveness of turbine vanes with and without film cooling (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The cooling effectiveness of three film-cooled vanes were compared to the cooling effectiveness of two non-film-cooled vanes. The comparison indicated that, for the vane configurations and test conditions examined, film cooling had an adverse effect near the suction-surface trailing edge of the vanes. Film cooling was found to be beneficial on the pressure surface of the vanes.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: NASA-TM-X-3022 , E-7860
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 78
    facet.materialart.
    Unknown
    Holographic nondestructive tests performed on composite samples of ceramic-epoxy-fiberglass sandwich structure (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: When a hologram storing more than one wave is illuminated with coherent light, the reconstructed wave fronts interfere with each other or with any other phase-related wave front derived from the illuminating source. This multiple wave front comparison is called holographic interferometry, and its application is called holographic nondestructive testing (HNDT). The theoretical aspects of HNDT techniques and the sensitivity of the holographic system to the geometrical placement of the optical components are briefly discussed. A unique HNDT system which is mobile and possesses variable sensitivity to stress amplitude is discribed, the experimental evidence of the application of this system to the testing of the hidden debonds in a ceramic-epoxy-fiberglass structure used for sample testing of the radome of the Pershing missile system is presented.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-TR-R-430 , M-461
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 79
    facet.materialart.
    Unknown
    Procedures for experimental measurement and theoretical analysis of large plastic deformations (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Theoretical equations are derived and analytical procedures are presented for the interpretation of experimental measurements of large plastic strains in the surface of a plate. Orthogonal gage lengths established on the metal surface are measured before and after deformation. The change in orthogonality after deformation is also measured. Equations yield the principal strains, deviatoric stresses in the absence of surface friction forces, true stresses if the stress normal to the surface is known, and the orientation angle between the deformed gage line and the principal stress-strain axes. Errors in the measurement of nominal strains greater than 3 percent are within engineering accuracy. Applications suggested for this strain measurement system include the large-strain-stress analysis of impact test models, burst tests of spherical or cylindrical pressure vessels, and to augment small-strain instrumentation tests where large strains are anticipated.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-TM-X-3027 , E-7661
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 80
    facet.materialart.
    Unknown
    Aerodynamic heating and loading within large open cavities in cone and cone-cylinder-flare models at Mach 6.7 (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The aerodynamic heating and loading distributions within large cavities exposed by surface openings to hypersonic flow were determined in the 8-foot high-temperature structures tunnel. Cone and cone-cylinder-flare models with cavities having regular and irregular surface-opening shapes were aerothermally tested at various angles of attack up to 30 deg. Tests were conducted at a Mach number of 6.7, a total temperature of 1800 K, a dynamic pressure of 80 kPa, and a stream unit Reynolds number of 6,000,000 per meter. The results showed that the heating rates at internal reattachment were generally lower but of the same order as the corresponding external heating rates; however, other internal heating rates were an order of magnitude lower. The internal flow showed characteristics of being funneled into jets or being dispersed dependent upon the internal surface contour.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: NASA-TN-D-7403 , L-9157
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 81
    facet.materialart.
    Unknown
    Light bulb heat exchanger for magnetohydrodynamic generator applications - Preliminary evaluation (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The light-bulb heat-exchanger concept is investigated as a possible means of using a combustion heat source to supply energy to an inert gas MHD power generator system. In this concept, combustion gases flow through a central passage which consists of a duct with transparent walls through which heat is transferred by radiation to a radiation receiver which in turn heats the inert gas by convection. The effects of combustion-gas emissivity, transparent-wall-transmissivity, radiation-receiver emissivity, and the use of fins in the inert gas coolant passage are studied. The results indicate that inert gas outlet temperatures of 2500 K are possible for combustion temperatures of 3200 K and that sufficient energy can be transferred from the combustion gas to reduce its temperature to approximately 2000 K. At this temperature more conventional heat exchangers can be used.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: NASA-TN-D-7534 , E-7593
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 82
    facet.materialart.
    Unknown
    Analysis of three-point-bend test for materials with unequal tension and compression properties (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An analysis capability is described for the three-point-bend test applicable to materials of linear but unequal tensile and compressive stress-strain relations. The capability consists of numerous equations of simple form and their graphical representation. Procedures are described to examine the local stress concentrations and failure modes initiation. Examples are given to illustrate the usefulness and ease of application of the capability. Comparisons are made with materials which have equal tensile and compressive properties. The results indicate possible underestimates for flexural modulus or strength ranging from 25 to 50 percent greater than values predicted when accounting for unequal properties. The capability can also be used to reduce test data from three-point-bending tests, extract material properties useful in design from these test data, select test specimen dimensions, and size structural members.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-TN-D-7572 , E-7544
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 83
    facet.materialart.
    Unknown
    FORTRAN 4 programs for summarization and analysis of fracture trace and lineament patterns (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Systematic and detailed analysis of lineament and fracture trace patterns has long been neglected because of the large number of observations involved in such an analysis. Three FORTRAN 4 programs were written to facilitate this manipulation. TRANSFORM converts the initial fracture map data into a format compatible with AZMAP, whose options allow repetitive manipulation of the data for optimization of the analysis. ROSE creates rose diagrams of the fracture patterns suitable for map overlays and tectonic interpretation. Examples are given and further analysis techniques using output from these programs are discussed.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-TM-X-70596 , X-644-74-3
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 84
    facet.materialart.
    Unknown
    Vacuum jacketed composite propulsion feedlines for cryogenic launch and space vehicles. Volume 2: Appendixes (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: For abstract, see N74-18505.
    Keywords: SPACE VEHICLES
    Type: NASA-CR-134554
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 85
    facet.materialart.
    Unknown
    Results of low speed wind tunnel tests on a .0405 scale model Rockwell Space Shuttle Orbiter tested both in free air and in the presence of a ground plane (OA16) (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Experimental aerodynamic investigations were conducted on a .0405 scale representation of the space shuttle orbiter in a 7.75 x 11 foot low speed wind tunnel during the time period March 21, to April 17, 1973. The primary test objectives were to investigate both the aerodynamic and propulsion effects of various air breathing engine systems in free air and in the presence of the ground. The free air portion of this test investigated the aerodynamic effects of engine nacelle number, nacelle grouping, and nacelle location. For this testing the model was sting mounted on a six component internal strain gage balance entering through the model base. The ground plane portion of the aerodynamic test investigated the same nacelle effects at ground plane locations of full scale W.P. = 239.9, 209.3, 158.9, 108.5, and 7.78 in. At the conclusion of the aerodynamic test period the propulsion effects of various nacelle locations and freestream orientations in the presence of the ground were investigated.
    Keywords: SPACE VEHICLES
    Type: NASA-CR-128793 , DMS-DR-2038
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 86
    facet.materialart.
    Unknown
    Method for compression molding of thermosetting plastics utilizing a temperature gradient across the plastic to cure the article (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A method is described for compression molding of thermosetting plastics composition. Heat is applied to the compressed load in a mold cavity and adjusted to hold molding temperature at the interface of the cavity surface and the compressed compound to produce a thermal front. This thermal front advances into the evacuated compound at mean right angles to the compression load and toward a thermal fence formed at the opposite surface of the compressed compound.
    Keywords: SPACE VEHICLES
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 87
    facet.materialart.
    Unknown
    Method of fabricating an article with cavities (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An article having a cavity with a thin bottom wall is provided by assembling a thin sheet, for example, a metal sheet, adjacent to the surface of a member having one or more apertures. A bonding adhesive is interposed between the thin sheet and the subadjacent member, and the thin sheet is subjected to a high fluid pressure. In order to prevent the differential pressure from being exerted against the thin sheet, the aperture is filled with a plug of solid material having a linear coefficient of thermal expansion higher than that of the member. When the assembly is subjected to pressure, the material is heated to a temperature such that its expansion exerts a pressure against the thin sheet thus reducing the differential pressure.
    Keywords: SPACE VEHICLES
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 88
    facet.materialart.
    Unknown
    An efficiency study on obtaining the minimum weight of a thermal protection system (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Three minimizing techniques are evaluated to determine the most efficient method for minimizing the weight of a thermal protection system and for reducing computer usage time. The methods used (numerical optimization and nonlinear least squares) for solving the minimum-weight problem involving more than one material and more than one constraint are discussed. In addition, the one material and one constraint problem is discussed.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: NASA-TM-X-58126 , JSC-08678
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 89
    facet.materialart.
    Unknown
    A homogeneous heat pipe design code (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A computer program was developed to facilitate parametric performance evaluation of heat pipes in lightweight heat rejection systems. A description of the code, user's manual, and sample inputs are provided. The emphasis is placed on the analysis and design of homogeneous wick heat pipes. The analysis of the annular heat pipe is included as part of the heat pipe radiator subroutine.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: NASA-CR-136831 , JPL-TM-33-663
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 90
    facet.materialart.
    Unknown
    Sensitivity analysis of torsional vibration characteristics of helicopter rotor blades. Part 2: Aerodynamics and sensitivity analysis (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A theoretical investigation of dynamic response characteristics of rotor blades was carried out with special emphasis on torsional degrees-of-freedom. Coupled equations of motion for flapwise bending and torsion were formulated at varying azimuth positions for rotor blades with noncollinear aerodynamic, elastic and mass axes. Both structural and aerodynamic mass, damping and stiffness coefficients were included. The variations of a sample blade at different flight conditions were investigated from these equations. The obtained numerical results were illustrated. The sensitivity of overall blade vibration characteristics to torsional oscillations was also investigated from the equations of motion for the sample blade. The illustrated results show the importance of torsional degrees-of-freedom in rotor blade analysis. Various possibilities of improving the overall response by tuning blade geometric, structural and aerodynamic characteristics are discussed.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-CR-2380
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 91
    facet.materialart.
    Unknown
    Apollo Saturn 511 effluent measurements from the Apollo 16 launch operations: An experiment (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An experiment was performed in conjunction with the Apollo 16 launch to define operational and instrumentational problems associated with launch-vehicle exhaust effluent monitoring. Ground and airborne sampling were performed for CO, CO2, hydrocarbons, and particulates. Sampling systems included filter pads and photometers for particulates and whole-air grab samples for gases. Launch debris was identified in the particulate samples at ground level(taken immediately after launch) and in the airborne measurements (taken 40 to 50 minutes after launch approximately 40 km downwind of the pad). Operational problems were identified and included the need for higher instrumentation mobility and the need for real-time sampling instrumentation as opposed to collection-type samples such as the whole-air grab sample.
    Keywords: SPACE VEHICLES
    Type: NASA-TM-X-2910 , L-9097
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 92
    facet.materialart.
    Unknown
    Demodulator for carrier transducers (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A carrier type transducer is supplied with a carrier wave via an audio amplifier, a filter, a frequency divider, and an oscillator. The carrier is modulated in accordance with the parameter being measured by the transducer and is fed to the input of a digital data system which may include a voltmeter. The output of the oscillator and the output of each stage of the divider are fed to an AND or a NAND gate and suitable variable and fixed delay circuits to the command input of the digital data system. With this arrangement, the digital data system is commanded to sample at the proper time so that the average voltage of the modulated carrier is measured. It may be utilized with ancillary circuitry for control of the parameter
    Keywords: THERMODYNAMICS AND COMBUSTION
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 93
    facet.materialart.
    Unknown
    System for stabilizing cable phase delay utilizing a coaxial cable under pressure (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Stabilizing the phase delay of signals passing through a pressurizable coaxial cable is disclosed. Signals from an appropriate source at a selected frequency, e.g., 100 MHz, are sent through the controlled cable from a first cable end to a second cable end which, electrically, is open or heavily mismatched at 100 MHz, thereby reflecting 100 MHz signals back to the first cable end. Thereat, the phase difference between the reflected-back signals and the signals from the source is detected by a phase detector. The output of the latter is used to control the flow of gas to or from the cable, thereby controlling the cable pressure, which in turn affects the cable phase delay.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 94
    facet.materialart.
    Unknown
    Apollo experience report: Development and use of specialized radio equipment for Apollo recovery operations (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: New personal communications equipment was required for the Apollo Program recovery operations. Two new, small, personal radios were developed and used successfully in the Apollo recovery program.
    Keywords: SPACE VEHICLES
    Type: NASA-TN-D-7587 , JSC-S-385
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 95
    facet.materialart.
    Unknown
    Effects of pressure, oxygen concentration, and forced convection on flame spread rate of Plexiglas, Nylon and Teflon (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Experiments were conducted in which the burning of cylindrical materials in a flowing oxidant stream was studied. Plexiglas, Nylon, and Teflon fuel specimens were oriented such that the flames spread along the surface in a direction opposed to flowing gas. Correlations of flame spread rate were obtained that were power law relations in terms of pressure, oxygen concentration, and gas velocity.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: NASA-TN-D-7555 , E-7611
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 96
    facet.materialart.
    Unknown
    Spacecraft control section for the improved Small Astronomy Satellite (SAS) (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The upgraded spacecraft control section for the Small Astronomy Satellite is able to point its thrust axis to any direction in space; it can also spin or slow its outer body rotation to zero for star-locked pointing of side viewing experiments. A programmable telemetry system and delayed command system enhance the inherent capability of a spacecraft designed to be used for a variety of experiments, each of which can be built independently and attached just prior to final acceptance testing and launch. The design of this new spacecraft, whose first launch is scheduled for 1975, is provided in sufficient detail to permit the reader to ascertain its suitability for specific experiments. A summary of the spacecraft characteristics, project reliability requirements, and environmental test conditions are included in the appendices.
    Keywords: SPACE VEHICLES
    Type: NASA-TM-X-70569 , X-405-74-7
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 97
    facet.materialart.
    Unknown
    Film cooling in a combustor operating at fuel-rich exit conditions (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Data were taken with a film-cooled test plate placed in the exhaust stream of a rectangular combustor. Results showed that in a fuel-rich zone, fuel entrained into the film-cooling air would burn at the conditions tested. Test conditions were cooling-gas flow rates, 9.5 and 5 percent of total gas flow; cooling-gas velocities, 23 and 12 m/sec; ambient-temperature cooling gas; hot-gas velocity, nominally 215 m/sec; fuel-air ratio to stoichiometric fuel-air ratio values of 0.1, 0.8, 1.0, 1.2, and 1.35, resulting in hot-gas temperatures from 590 to 2100 K; and atmospheric pressure. Analytical prediction of wall temperatures agreed reasonably well with experimental results.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: NASA-TN-D-7513 , E-7561
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 98
    facet.materialart.
    Unknown
    Assembly and analysis of fragmentation data for liquid propellant vessels (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Fragmentation data was assembled and analyzed for exploding liquid propellant vessels. These data were to be retrieved from reports of tests and accidents, including measurements or estimates of blast yield, etc. A significant amount of data was retrieved from a series of tests conducted for measurement of blast and fireball effects of liquid propellant explosions (Project PYRO), a few well-documented accident reports, and a series of tests to determine auto-ignition properties of mixing liquid propellants. The data were reduced and fitted to various statistical functions. Comparisons were made with methods of prediction for blast yield, initial fragment velocities, and fragment range. Reasonably good correlation was achieved. Methods presented in the report allow prediction of fragment patterns, given type and quantity of propellant, type of accident, and time of propellant mixing.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-CR-134538
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 99
    facet.materialart.
    Unknown
    Stress anisotropy and concentration effects in high pressure measurements (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Sodium chloride is used as an internal pressure standard in high pressure research. Possible corrections are discussed which are needed in the calibration of this standard due to the independent effects of stress anisotropy and stress concentration in pressure vessels. The first is due to the lack of a truly hydrostatic state of stress in solid state pressure vessels. The second is due to the difference in the compressibilities between the pressure transmitting substances (sodium chloride) and a stiffer test specimen. These two corrections are then combined and a total correction, as a function of measured pressure, is discussed for two systems presently in use. The predicted value of the combined effect is about 5-10% of the pressure at 30 GPa.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-CR-142600 , REPT-2345
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 100
    facet.materialart.
    Unknown
    Elastic moduli of precompressed pyrophyllite used in ultrahigh pressure research (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The propagation of ultrasonic pulses in pyrophyllite specimens was studied to determine the effect of specimen precompression on the measured elastic moduli. Measurements were made at room pressure and, for the precompressed specimens, to pressures of 3 kbar. Pyrophyllite was found to be elastically anisotropic, apparently the result of the fabric present in our material. The room pressure adiabatic bulk modulus as measured on specimens made of isostatically compacted powered pyrophyllite was determined to be 96.1 kbar. The wave speeds of ultrasonic pulses in pyrophyllite were found to decrease with increasing specimen precompression. A limiting value of precompression was found, above which no further decrease in wave speed was observed. For the shear wave speeds this occurs at 10 kbar while for the longitudinal wave at 25 kbar. In the limit, the shear waves propagate 20% slower than in the unprecompressed samples; for the longitudinal wave the difference is 30%.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-CR-142598 , REPT-2366
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...