ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Inorganic Chemistry  (8,142)
  • STRUCTURAL MECHANICS  (2,018)
  • FLUID MECHANICS  (1,814)
  • 1970-1974  (6,578)
  • 1960-1964  (4,817)
  • 1945-1949  (579)
Collection
Keywords
Publisher
Years
Year
  • 1
    facet.materialart.
    Unknown
    Noise and vibration level reduction by covering metal structures with layers of damping materials (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: One of the most important methods of reducing the noise and vibration level is the damping of the secondary sources, such as metal plates, often used in vehicle structures, by means of covering materials with high internal viscosity. Damping layers are chosen at an optimum thickness corresponding to the frequency and temperature range in which a certain structure works. The structure's response corresponding to various real situations is analyzed by means of a measuring chain including electroacoustical or electromechanical transducers. The experimental results provide the dependence of the loss factor and damping transmission coefficient as a function of the damping layer thickness or of the frequency for various viscoelastic covering materials.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 246-253
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 2
    facet.materialart.
    Unknown
    The Coanda effect in gas-dynamic noise control (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: The principle types of silencers are discussed for gas dynamic noise of free steam and gas expansions, as well as the results of research in gas dynamics of jets and applied acoustics. Gas dynamic noise attenuation by means of the Coanda effect is due to fluid decompression in a Coanda ejector of the external type, where a structural change takes place in the acoustic frequency spectrum and in its direction, as well as a substantial decrease in the fluid's velocity, temperature and concentration. This process is continued in the second phase with absorption of the acoustic waves by means of an active structure.
    Keywords: FLUID MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 143-149
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 3
    facet.materialart.
    Unknown
    Vibration and recoil control of pneumatic hammers (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: Vibration sources are described for pneumatic hammers used in the mining industry (pick hammers), in boiler shops (riveting hammers), etc., bringing to light the fact that the principal vibration source is the variation in air pressure inside the cylinder. The present state of the art of vibration control of pneumatic hammers as it is practiced abroad, and the solutions adopted for this purpose, are discussed. A new type of pneumatic hammer with a low noise and vibration level is presented.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 79-84
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 4
    facet.materialart.
    Unknown
    Vibration control in forge hammers (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: Special measures are discussed for calculating, designing and executing a forge hammer foundation, so that the vibrations that occur during its working will not be transmitted to neighboring machinery, workrooms and offices. These vibrations are harmful to the workers near the forge hammer.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 73-78
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 5
    facet.materialart.
    Unknown
    Experimental determination of the vibration level in 5,100 kW electric locomotive assemblies (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: Because of the high vibration level occurring during the running of electric locomotives, mechanical defects occur in the control mechanisms of auxiliary services. This fact has given rise to the necessity of determining the values of these vibrations in electric locomotives during their running. Measurements were conducted on the Craiova-Drobeta-Turnu Severin line, and measures to reduce the vibration level in electric locomotives were instituted.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 50-54
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 6
    facet.materialart.
    Unknown
    Random vibrations of linear viscoelastic beams with lumped masses (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: A method is presented of determining the mean square transversal deflection of an isotropic and homogeneous linear viscoelastic beam having a certain number of lengthwise distributed lumped masses. It is assumed that the beam is acted upon by a stationary random process uniformly distributed along the beam. The method is useful in vibration level control by means of additional lumped masses.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 36-42
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 7
    facet.materialart.
    Unknown
    Random vibrations of quadratic damping systems (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: An oscillating system with quadratic damping subjected to white noise excitation is replaced by a nonlinear, statistically equivalent system for which the associated Fokker-Planck equation can be exactly solved. The mean square responses are calculated and the optimum damping coefficient is determined with respect to the minimum mean square acceleration criteria. An application of these results to the optimization of automobile suspension damping is given.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 29-35
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 8
    facet.materialart.
    Unknown
    The response of many-storied structures under seismic actions (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: A seismic action which is characterized by the acceleration function of the seismic motion is analyzed. The equations of motion in the direction of the seismic action are determined for a completely rigid ground and for a ground with linear deformability characteristics (rotation deformability). The equation for the rotation motion is derived by considering elastic and viscoelastic properties of the foundation ground. The differential equations are written by treating the mechanical model of a many-storied structure as a fixed vertical beam with a uniformly distributed mass as well as with concentrated masses on each floor.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 43-49
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 9
    facet.materialart.
    Unknown
    Insulation of nonlinear and random vibrations in the mining industry (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: The insulation of nonlinear and random vibrations is considered for some ore preparing and sorting implements: rotary crushers, resonance screens, hammer mills, etc. The appearance of subharmonic vibrations is analyzed, and the conditions for their appearance are determined. A method is given for calculating the insulation of these vibrations by means of elastic elements made of rubber. The insulation of the random vibrations produced by Symons crushers is calculated by determining the transmissability and deformation of the insulation system for a narrow band random response.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 22-28
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 10
    facet.materialart.
    Unknown
    A mathematical model for storied buildings subjected to automatic loom stresses (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: Expressions are derived for the displacements of a many storied building subjected to the action of classical weaving looms located at different levels of the building. The building is regarded as a vertical fixed beam with a uniformly distributed mass as well as concentrated masses at each level. The calculation relations are obtained on the assumption of harmonic variation of the forces acting at each level as well as the assumption of narrow band stationary random excitatory forces.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 15-21
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 11
    facet.materialart.
    Unknown
    Study of vibrations produced by a vibrating beam used for vibrating concretes (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: For compacting concretes in building, vibrating beams are used. The vibrations are generated by inertial vibrators, and the beam is normally displaced by the operator by means of a handle that is elastically fastened to the beam by means of rubber pads. Considered are vibrations transmitted to the operator, taking into account the beam's shock vibration motions. The steady state motion of a dynamic beam pattern is studied, and results of experimental tests with existing equipment are presented.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 9-14
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 12
    facet.materialart.
    Unknown
    Stresses in dome-shaped shells of revolution with discontinuities at the apex (1974)
    In:  CASI
    Details
    Publication Date: 2006-04-02
    Description: Asymptotic solutions of Novozhilov's equations of shells of revolution are derived for axisymmetric and first harmonic loadings. The solutions obtained are valid throughout the shallow and nonshallow regions. Stresses in dome shaped shells of revolution with a discontinuity in the form of a circular hole, a circular rigid insert, or a nozzle at the apex have been investigated. Numerical results are obtained for spheres, ellipsoids, and paraboloids, containing a discontinuity under a internal pressure and moment. Curves depicting stress distributions are given. The influence of three types of discontinuity on the stresses of the shells is also given.
    Keywords: STRUCTURAL MECHANICS
    Type: Multivariant Function Model Generation; 118 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 13
    facet.materialart.
    Unknown
    Current structural vibration problems associated with noise (1974)
    In:  CASI
    Details
    Publication Date: 2011-10-14
    Description: As the performance of aerospace vehicles has increased, the noise generated by the propulsion system and by the passage of the vehicle through the air has also increased. Further increases in performance are now underway for space vehicles such as the space shuttle vehicle and for short distance takeoff and landing (STOL) aircraft, and are being planned for supersonic aircraft. The flight profiles and design features of these high-performance vehicles are reviewed and an estimate made of selected noise-induced structural vibration problems. Considerations for the prevention of acoustic fatigue, noise transmission, and electronic instrument malfunction are discussed.
    Keywords: STRUCTURAL MECHANICS
    Type: AGARD Noise Mech.; 16 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 14
    facet.materialart.
    Unknown
    Inclusion of transverse shear deformation in finite element displacement formulations (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A stiffness matrix is derived for a beam element with transverse shear deformation. It is shown that straightforward energy minimization yields the correct stiffness matrix in displacement formulations when transverse shear effects are considered. Since the TIM4 beam element does not represent the geometric boundary conditions for a cantilever beam the rotation of the normal must be retained as a grid point degree of freedom.
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 12; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 15
    facet.materialart.
    Unknown
    New diagnostic technique for the study of turbulent boundary-layer separation (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Description of a diagnostic technique for determining the unsteady character of turbulent boundary-layer separation. The technique uses thin platinum films mounted flush with the model surface. Voltages from these films provide measurements related to the flow character above the film. For illustration, results obtained by this technique are presented for the interaction of a hypersonic shock wave and a turbulent boundary layer, with and without separation.
    Keywords: FLUID MECHANICS
    Type: AIAA Journal; 12; Oct. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 16
    facet.materialart.
    Unknown
    Reynolds-shear-stress measurements in a compressible boundary layer within a shock-wave-induced adverse pressure gradient (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: FLUID MECHANICS
    Type: Journal of Fluid Mechanics; 65; Aug. 12
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 17
    facet.materialart.
    Unknown
    Evolution of a moderately short turbulent boundary layer in a severe pressure gradient (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The early and intermediate development of a highly accelerated (or decelerated) turbulent boundary layer is analyzed. For sufficiently large accelerations (or pressure gradients) and for total normal strains which are not excessive, the equation for the Reynolds shear stress simplifies to give a stress that remains approximately constant as it is convected along streamlines. The theoretical results for the evolution of the mean velocity in favourable and adverse pressure gradients agree well with experiment for the cases considered. A calculation which includes mass injection at the wall is also given.
    Keywords: FLUID MECHANICS
    Type: Journal of Fluid Mechanics; 64; July 24
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 18
    facet.materialart.
    Unknown
    Microcraters formed in glass by projectiles of various densities (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An experiment was conducted investigating the effect of projectile density on the structure and size of craters in soda lime glass and fused quartz. The projectiles were spheres of polystyrene-divinylbenzene (PS-DVB), aluminum, and iron with velocities between 0.5 and 15 km/sec and diameters between 0.4 and 5 microns. The projectile densities spanned the range expected for primary and secondary particles of micrometer size at the lunar surface, and the velocities spanned the lower range of micrometeoroid velocities and the upper range of secondary projectile velocities. There are changes in crater morphology as the impact velocity increases, and the transitions occur at lower velocities for the projectiles of higher density. The sequence of morphological features of the craters found for PS-DVB impacting soda lime glass for increasing impact velocity, described in a previous work (Mandeville and Vedder, 1971), also occurs in fused quartz and in both targets with the more dense aluminum and iron projectiles. Each transition in morphology occurs at impact velocities generating a certain pressure in the target. High density projectiles require a lower velocity than low-density projectiles to generate a given shock pressure.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Geophysical Research; 79; Aug. 10
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 19
    facet.materialart.
    Unknown
    Approximate techniques of structural reanalysis (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A study is made of two approximate techniques for structural reanalysis. These include Taylor series expansions for response variables in terms of design variables and the reduced-basis method. In addition, modifications to these techniques are proposed to overcome some of their major drawbacks. The modifications include a rational approach to the selection of the reduced-basis vectors and the use of Taylor series approximation in an iterative process. For the reduced basis a normalized set of vectors is chosen which consists of the original analyzed design and the first-order sensitivity analysis vectors. The use of the Taylor series approximation as a first (initial) estimate in an iterative process, can lead to significant improvements in accuracy, even with one iteration cycle. Therefore, the range of applicability of the reanalysis technique can be extended. Numerical examples are presented which demonstrate the gain in accuracy obtained by using the proposed modification techniques, for a wide range of variations in the design variables.
    Keywords: STRUCTURAL MECHANICS
    Type: Computers and Structures; 4; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 20
    facet.materialart.
    Unknown
    Turbulent diffusion with memories and intrinsic shear (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The first part of the present theory is devoted to the derivation of a Fokker-Planck equation. The eddies smaller than the hydrodynamic scale of the diffusion cloud form a diffusivity, while the inhomogeneous, bigger eddies give rise to a nonuniform migratory drift. This introduces an eddy-induced shear which reflects on the large-scale diffusion. The eddy-induced shear does not require the presence of a permanent wind shear and is intrinsic to the diffusion. Secondly, a transport theory of diffusivity is developed by the method of repeated-cascade and is based upon a relaxation of a chain of memories with decreasing information. The full range of diffusion consists of inertia, composite, and shear subranges, for which variance and eddy diffusivities are predicted. The coefficients are evaluated. Comparison with experiments in the upper atmosphere and oceans is made.
    Keywords: FLUID MECHANICS
    Type: Zeitschrift fuer Naturforschung; vol. 29a
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 21
    facet.materialart.
    Unknown
    On numerical methods to impose asymptotic boundary conditions of boundary-layer equations (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The error minimization method proposed by Nachtsheim and Swigert (1965) to satisfy the asymptotic boundary conditions of boundary layer equations is proved to be equivalent to imposing the condition of fastest decay. As a consequence, a uniqueness problem is not arising in the solutions of boundary layer equations obtained by their method.
    Keywords: FLUID MECHANICS
    Type: Computers and Fluids; 2; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 22
    facet.materialart.
    Unknown
    Method for producing a uniform, low Reynolds number jet (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: In one attempt to produce a simple inexpensive nozzle, a 2-in. diam plate with 37 holes was investigated (Stadler, 1960), anticipating that the small jets emanating from the plate would combine to form a uniform stream. This experiment was unsuccessful because a uniform flow was not established until the flow had progressed many nozzle diameters downstream. However, an extension of this concept to a much larger number of very small jets, viz., a porous plate, did provide a method for producing a uniform, low Reynolds number jet almost immediately downstream of the nozzle (Greene, 1973). The method is described and some typical jet velocity profiles for nozzle Reynolds numbers from 50 to 1000 are given.
    Keywords: FLUID MECHANICS
    Type: Journal of Spacecraft and Rockets; 11; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 23
    facet.materialart.
    Unknown
    Approach to the origin of turbulence on the basis of two-point kinetic theory (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Equations for the fluctuation correlation in an incompressible shear flow are derived on the basis of kinetic theory, utilizing the two-point distribution function which obeys the BBGKY hierarchy equation truncated with the hypothesis of 'ternary' molecular chaos. The step from the molecular to the hydrodynamic description is accomplished by a moment expansion which is a two-point version of the thirteen-moment method, and which leads to a series of correlation equations, viz., the two-point counterparts of the continuity equation, the Navier-Stokes equation, etc. For almost parallel shearing flows the two-point equation is separable and reduces to two Orr-Sommerfeld equations with different physical implications.
    Keywords: FLUID MECHANICS
    Type: Physics of Fluids; 17; Jan. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 24
    facet.materialart.
    Unknown
    Static, stability, and dynamic analysis of shells of revolution by numerical integration - A comparison (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Recent innovations in digital computer technology have enabled engineers to analyze shell structures of complex configurations without unduly restrictive approximations. An attempt is made to compare the various programs now generally available from the point of view of the advantages of the relative technique utilized, as well as the programmed state of the art. Many of the comparisons are based on the sample problems solved by the STARS-2 system of programs. These examples indicate both the structural detail which can be analyzed by, and the analytical capabilities available in, the numerical shell-of-revolution programs. All advantages and differences are demonstrated by use of solutions for realistic shell problems in the areas of statics, stability, vibrations, and dynamic response of shells subjected to time-dependent loadings.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 25
    facet.materialart.
    Unknown
    Forced vibrations of multi-component compliant tanks and feedlines (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An analytical and experimental research program was performed to investigate the effects of flexible tanks and lines and the total system dynamic response of a simple physical system which had some of the essential features of a liquid-fueled launch vehicle. Several vessel-wall materials were used to obtain a range of elastic moduli. Water was used to simulate the fuel and an electromagnetic shaker provided external excitation such as might originate from a rocket-propulsion system. Experimental data were compared to values obtained from mathematical models for the many degree-of-freedom lumped-mass representation.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 26
    facet.materialart.
    Unknown
    Computation of steady nozzle flow by a time-dependent method (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The equations of motion governing steady, inviscid flow are of a mixed type, that is, hyperbolic in the supersonic region and elliptic in the subsonic region. These mathematical difficulties may be removed by using the so-called time-dependent method, where the governing equations become hyperbolic everywhere. The steady-state solution may be obtained as the asymptotic solution for large time. The object of this research was to develop a production type computer program capable of solving converging, converging-diverging, and plug two-dimensional nozzle flows in computational times of 1 min or less on a CDC 6600 computer.
    Keywords: FLUID MECHANICS
    Type: AIAA Journal; 12; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 27
    facet.materialart.
    Unknown
    Nonproportional loading limit for structures (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The design of most structures involves ensuring integrity for several independent loading conditions. Often, it is rational to design these, exploiting the ductility of the materials to reduce structural costs. Then, ensuring integrity evokes the need for nonmonotonic limit analyses. A groundwork is laid for implementing these analyses. An alternate limit load characterization to that of Greenberg is provided, a mathematical statement of the problem leading to both monotonic (proportional) and nonmonotonic limit loads values is formulated, a direct limit load analysis procedure for analysis within a finite-element framework is described, and limit loads for sets of simple structures are evaluated. A direct limit analysis process is described, and monotonic limit loads are characterized. The process furnishes 'exact' values of limit loads with increasing efficiency as the number of structural elements and force redundancy decreases. Tests show that the accuracy of predicting nonmonotonic limit loads is very sensitive to the number of degrees of freedom in the analysis compared with the total number in the model.
    Keywords: STRUCTURAL MECHANICS
    Type: Computers and Structures; 4; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 28
    facet.materialart.
    Unknown
    Flow properties in expansion tube with helium, argon, air, and CO2 (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Test flow velocities from 5 to 7 km/sec were generated in a 6-in. expansion tube using helium, argon, air, and CO2 test gases. Pitot pressure profiles across the flow at the test section are presented for the four test gases, and measured flow quantities are compared to computer predicted values. Comparison of predicted and measured flow quantities suggests the expansion to be near thermochemical equilibrium for all test gases and implies the existence of a totally reflected shock at the secondary diaphragm. Argon, air, and CO2 flows were observed to attenuate while traversing the acceleration section, whereas no attenuation was observed for helium.
    Keywords: FLUID MECHANICS
    Type: AIAA Journal; 12; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 29
    facet.materialart.
    Unknown
    Adhesive fracture mechanics (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: In studies of fracture mechanics the adhesive fracture energy is regarded as a fundamental property of the adhesive system. It is pointed out that the value of the adhesive fracture energy depends on surface preparation, curing conditions, and absorbed monolayers. A test method reported makes use of a disk whose peripheral part is bonded to a substrate material. Pressure is injected into the unbonded central part of the disk. At a certain critical pressure value adhesive failure can be observed. A numerical stress analysis involving arbitrary geometries is conducted.
    Keywords: STRUCTURAL MECHANICS
    Type: International Journal of Fracture; 10; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 30
    facet.materialart.
    Unknown
    Non-equilibrium ionized blast wave (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The structure of a cylindrical blast wave with ionization at non-LTE conditions was calculated using equations previously developed by Wu and Fu (1970). The degree of ionization was predicted by a modified Saha equation. Temperature profiles show that the temperature at non-LTE conditions is lower than at LTE near the shock front. This corresponds to a higher degree of ionization for the non-LTE limit, which indicates that the neutral gas absorption is much more efficient at non-LTE than at the LTE limit. The decaying velocity under non-LTE is approximately 15% less than under LTE.
    Keywords: FLUID MECHANICS
    Type: Physical Society of Japan; vol. 36
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 31
    facet.materialart.
    Unknown
    New triangular plate-bending finite element with transverse shear flexibility (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 12; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 32
    facet.materialart.
    Unknown
    Remarks on the decay of homogeneous turbulence from a given state (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A previous theory which did not require a usual closure assumption required three or more initial spectra. By allowing a simple physical assumption (a modification of Kovasznay's (1948) hypothesis), the required number of spectra is reduced to two. Agreement with experiment is good.
    Keywords: FLUID MECHANICS
    Type: Physics of Fluids; 17; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 33
    facet.materialart.
    Unknown
    Interactive design of large end rings on stiffened conical shells using composites (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Design study methods and results for a composite reinforced base ring for the conical aeroshell structure of the planetary lander vehicle for Project Viking, an unmanned mission to Mars, are presented. The aeroshell is a ring and stringer-stiffened conical shell structure having a half angle of 70 degrees with a large base ring mounted at the outer edge of the cone and a large pay-load ring in the interior with many smaller rings spaced along the inside shell surface. The purpose of the structure is to develop the aerodynamic drag required to decelerate the lander in the Mars atmosphere to facilitiate a soft landing. The design of a shell structure of this complexity requires the use of the latest technology available in a large general-purpose shell buckling program. The large general-purpose non-linear shell buckling program (BOSOR 2) which was used for this purpose is described.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 34
    facet.materialart.
    Unknown
    Progress and problems in erosion prediction (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Methods for predicting erosion resulting from repeated localized impulsive loadings, such a impacts from droplets or in cavitation flow from microjets and bubbles, are examined. The parameters which determine the adequacy of a component to resist the loads put upon it are identified. The development of erosion rate models is discussed. The expected accuracy of the prediction and the sources of error are analyzed.
    Keywords: FLUID MECHANICS
    Type: NBS The Role of Cavitation in Mech. Failure; p 107-114
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 35
    facet.materialart.
    Unknown
    Effects of viscoelasticity on cavitation in drag reducing fluids (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: To study cavitation inception in polymer solutions, a blow-down water tunnel with short running times was used. Tests were made using 1/4 and 1/2 inch diameter models of hemispherical-nose cylinders. To accurately detect the inception of cavitation, a reliable technique was developed using a continuously operating He-Ne gas laser. The laser beam was adjusted to grazing incidence with the model at the minimum pressure point where cavitation inception was to be expected. A sensitive photocell was placed at ninety degrees to detect the beam. As incipient cavitation occurred, the bubbles caused scattering of the laser beam which was picked up by the photocell. Static pressure near the model in the working section of the tunnel was measured using a solid-state pressure pick-up. The signals from the photocell and the pressure pick-up were recorded on an oscillograph. Velocity field visualization was achieved using one microsecond duration light pulses scattered by small polystryrene latex spheres in the flow.
    Keywords: FLUID MECHANICS
    Type: NBS The Role of Cavitation in Mech. Failures; p 100-106
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 36
    facet.materialart.
    Unknown
    Effect of cavitation on fluid stability in polymer thickened fluids and lubricants (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The effects of cavitating flow on the polymeric additives used in functional fluids are described. A comparison of thermal and mechanical stability tests for these polymer solutions show distinct differences in the machanism of the polymer degradation. The thermal degradation tests appear to cause an unzippering or depolymerization type of reaction in which there is no particular selectivity based on molecular weight. The mechanical degradation of these fluids appears to be based on molecular weight. Measurements of molecular weight distributions during mechanical degradation show that for a given level of intensity only molecules above a certain minimum size are degraded. The effects of ultrasonic radiation on polymer degradation are reported. Tests were conducted to demonstrate the mechanism of mechanical polymer degradiation in an orifice. A more severe test than the orifice test in which two tapered roller bearings loaded against each other produce the mechanical breakdown is discussed.
    Keywords: FLUID MECHANICS
    Type: NBS The Role of Cavitation in Mech. Failures; p 88-99
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 37
    facet.materialart.
    Unknown
    Lubricant pressure rippling in dynamic Hertzian contacts induced by surface roughness (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A numerical analysis of the pressure distribution of a lubricant in contact with a rough surface was conducted. The magnitude of the pressures was determined by their root mean square value for the contact of two dimensional cylinders. The pressure was found to vary in the following manner: (1) the location in the contact, (2) the spectrum or frequency content of the surface roughness, (3) the mean plateau film thickness, and (4) the root mean square value of the surface roughness. Mathematical models are developed to show the relationships of the parameters.
    Keywords: FLUID MECHANICS
    Type: NBS The Role of Cavitation in Mech. Failures; p 62-73
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 38
    facet.materialart.
    Unknown
    Examples of oil cavitation erosion in positive displacement pumps (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The effects of cavitation flow on piston type, positive displacement, hydraulic pumps are discussed. The operating principles of the pump and the components which are most subject to erosion effects are described. The mechanisms of cavitation phenomena are identified from photographic records. Curves are developed to show the solubility of air in water, oil-water emulsion, and industrial hydraulic oil.
    Keywords: FLUID MECHANICS
    Type: NBS The Role of Cavitation in Mech. Failures; p 48-53
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 39
    facet.materialart.
    Unknown
    Some practical examples of cavitation erosion and their prevention (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The problem of failures caused by cavitation erosion are discussed. The concepts of intensity of erosion, erosion strength, and the time dependence of erosion rate are analyzed. The relation of these parameters to system variables such as pressure and velocity, and to the properties of materials are investigated. Using several examples of actual cavitation erosion, methods of prevention and their limitations are examined.
    Keywords: FLUID MECHANICS
    Type: NBS The Role of Cavitation in Mech. Failures; p 39-47
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 40
    facet.materialart.
    Unknown
    Recent theories of cavitation damage including non-symmetrical bubble collapse effects (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Theories of cavitation damage mechanisms are discussed. Photographic evidence has shown that the actual collapse of bubbles near a symmetry-destroying feature such as a nearby wall results in a toroidal-like collapse, with the final generation of a liquid microjet oriented toward the wall. Numerical analyses indicate that the shock wave intensity emitted during collapse is not likely to be strong enough to be damaging to most materials. It has been determined that actual damage is usually a result of a combination of impact effect of the microjet and the shock wave pressures generated by bubble rebounds.
    Keywords: FLUID MECHANICS
    Type: NBS The Role of Cavitation in Mech. Failures; p 31-35
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 41
    facet.materialart.
    Unknown
    The role of mechanical properties in cavitation erosion resistance (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Methods for determining the correlations of erosion resistance and mechanical properties of materials are discussed. The most common method of testing cavitation erosion resistance of materials is the vibratory cavitation probe. The instrument and its operation are described. The use of the whirling arm device is considered as a second method. Metallographic investigations of the earliest stages of cavitation erosion damage of metallic materials was conducted. The materials show plastic deformation occurring during the incubation period and increasing until cracks form and metal fragments are lost. The parameters of the work done to cause material fractures are identified. The reactions obtained with specific materials are reported.
    Keywords: FLUID MECHANICS
    Type: NBS The Role of Cavitation in Mech. Failures; p 23-30
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 42
    facet.materialart.
    Unknown
    Role of physical properties of liquids in cavitation erosion (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The dependence of erosion rates on the ambient temperature of water is discussed. The assumption that the gas inside the bubble is compressed adiabatically during collapse gives better agreement with experiments than the assumption that the gas is isothermally compressed. Acoustic impedance is an important liquid parameter that governs the erosion intensity in vibratory devices. The investigation reveals that the major physical properties of liquids governing the intensity of erosion include density, sound speed, surface tension, vapor pressure, gas content, and nuclei distribution.
    Keywords: FLUID MECHANICS
    Type: NBS The Role of Cavitation in Mech. Failures; p 13-22
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 43
    facet.materialart.
    Unknown
    Physics associated with cavitation induced material damage (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The role of cavitation in mechanical failure is discussed. Some of the most common types of material damage associated with the presence of cavitation are surface material removal, delamination and structural vibration. This occurs in external flows such as on propellers, hydrofoils, and high speed non-lifting surfaces. In internal flows, pipe bends, inlets, constructions, pumps and turbines are typical. Nominally nonflowing liquids are also susceptible in, for example, strong acoustic fields and high energy particle detectors. For flowing systems, Bernoulli's equation shows how a local pressure is reduced as the fluid's velocity is increased. At sufficiently high velocities, a tension can actually develop and this has, in fact, been demonstrated experimentally. Once the pressure is reduced below the fluid vapor pressure a vapor cavity can be nucleated. Various aspects of this process are simply shown by considering the flow over a lifting surface.
    Keywords: FLUID MECHANICS
    Type: NBS The Role of Cavitation in Mech. Failures; p 3-12
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 44
    facet.materialart.
    Unknown
    Boundary value problems with incremental plasticity in granular media (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Discussion of the critical state concept in terms of an incremental theory of plasticity in granular (soil) media, and formulation of the governing equations which are convenient for a computational scheme using the finite element method. It is shown that the critical state concept with its representation by the classical incremental theory of plasticity can provide a powerful means for solving a wide variety of boundary value problems in soil media.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 45
    facet.materialart.
    Unknown
    A solution to the contact of two rough spherical surfaces (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The influence of roughness on the interfacial pressure distribution in the contact of two spherical surfaces is considered. An approximate general solution is presented and it is shown that the pressure for all radii can be determined solely from a reference pressure which is, in turn, a function of two parameters - a dimensionless roughness and a dimensionless hardness. Values for the radius of contact are also presented.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 46
    facet.materialart.
    Unknown
    Mixed mode stress field effect in adhesive fracture (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Numerical or analytical analyses were performed on seven different test specimens including blister test, 90-degree peel test, torsion test, and various cone tests. These specimens are in general subjected to complex stress fields having various amounts of Mode I, Mode II, and Mode III loads. The specimens were then constructed using polymethyl methacrylate for the adherends and a transparent polyurethane elastomer (Solithane 113) for the adhesive. This combination permitted direct observation of the bondline as load was applied. Although initial debonds as well as bond end termination singularities were present in all specimens, in some cases the debond did not initiate at the singularity points as would normally have been expected. An explanation for this behavior is presented, as well as a comparison of loading mode effect on those specimens for which the debond did propagate from a bond terminus singular point.
    Keywords: STRUCTURAL MECHANICS
    Type: International Journal of Fracture; 10; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 47
    facet.materialart.
    Unknown
    Wall shear in strongly retarded and separated compressible turbulent boundary layers (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: FLUID MECHANICS
    Type: AIAA Journal; 12; Oct. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 48
    facet.materialart.
    Unknown
    Dependence of plate-bending finite element deflections and eigenvalues on Poisson's ratio (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 12; Oct. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 49
    facet.materialart.
    Unknown
    Experimental study of the shock-induced unsteady laminar boundary layer on a flat plate (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The behavior of the unsteady laminar boundary layer induced by the incident shock wave passing over a flat plate mounted in a shock tube has been experimentally studied for shock speeds ranging from 2.35 to 7.34 km/sec by measuring unsteady heat transfer rates to the plate using thin-film heat-flux gages. Theoretical heat-transfer rates were predicted from analytical solutions in the literature which describe the unsteady flat plate boundary layer development for equilibrium real-gas flows. Experimental results obtained for both air and nitrogen were found to be in good agreement with the theoretical predictions.
    Keywords: FLUID MECHANICS
    Type: Physics of Fluids; 17; May 1974
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 50
    facet.materialart.
    Unknown
    Fracture initiation and propagation in a cylindrical shell containing an initial surface flaw (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An attempt is made to provide the necessary analytical tools for the application of two different types of fracture criteria to shell structures. Of particular interest is the problem of fracture propagation and arrest in a cylindrical pressure vessel containing an initial surface flaw. It is assumed that the flaw has the most unfavorable geometry and orientation, namely, it is a crack lying on a meridional plane. Stress intensity factor for a part-through crack, and a surface or internal crack with a fully yielded net ligament are considered. Attention is given to constant delta curves for depressurization studies and to depressurization and crack arrest in pressure vessels.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 51
    facet.materialart.
    Unknown
    Conservation equations of gasdynamics in curvilinear coordinate systems (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Description of a new method of writing the conservation equations of gasdynamics in curvilinear coordinates which eliminates undifferentiated terms. It is thus possible to readily apply difference schemes derived for Cartesian coordinates which conserve mass, momentum, and energy in the total flow field. The method is derived for orthogonal coordinates, and then extended to cover the most general class of coordinate transformations, using general tensor analysis. Several special features of the equations are discussed.
    Keywords: FLUID MECHANICS
    Type: Journal of Computational Physics; 14; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 52
    facet.materialart.
    Unknown
    Comments on Crocco's solution and the independence principle for compressible turbulent boundary layers (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The purpose of the present note is to show that on a flat plate where both the wall temperature and mean wall pressure are constant, neither of the limitations of parallel flow or of unity for the turbulent Prandtl number are required in order for the Crocco solution to apply to the turbulent boundary-layer flow. It is shown herein that this result is subject to restrictions on the magnitude of pressure fluctuations. The same analysis is generalized to show that the compressible turbulent boundary layer on an isothermal swept flat plate is independent of the spanwise flow if the molecular Prandtl number is unity.
    Keywords: FLUID MECHANICS
    Type: AIAA Journal; 12; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 53
    facet.materialart.
    Unknown
    An overview of high temperature metal fatigue: Aspects covered by the 1973 International Conference on Creep and Fatigue (1974)
    In:  CASI
    Details
    Publication Date: 2012-05-22
    Description: A summary of papers is presented which covers the following broad aspects of high temperature metal fatigue: (1) materials development and characterization; (2) environmental factors, including air, vacuum, helium, iodine, sodium, and radiation environments; (3) general fatigue life relationships; (4) crack growth laws; (5) design code activities; and (6) design and service experience. Illustrative tables accompany the summary.
    Keywords: STRUCTURAL MECHANICS
    Type: AGARD Low Cycle High Temp. Fatigue; 47 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 54
    facet.materialart.
    Unknown
    Identification of structural parameters from helicopter dynamic test data (1974)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A method is presented for obtaining the mass, stiffness, and damping parameters of a linear mathematical model, having fewer degrees of freedom than the structure it represents, directly from dynamic response measurements on the actual helicopter without a priori knowledge of the physical characteristics of the fuselage. The only input information required in the formulation is the approximate natural frequency of each mode and mobility data measured proximate to these frequencies with sinusoidal force excitation applied at only one point on the vehicle. The practicality and numerical soundness of the theoretical development was demonstrated through a computer simulation of an experimental program.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Ames Res. Center Rotorcraft Dyn.; p 239-248
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 55
    facet.materialart.
    Unknown
    Application of antiresonance theory to helicopters (1974)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Antiresonance theory is the principle underlying nonresonant nodes in a structure, and covers both nonresonant nodes occurring naturally and those introduced by devices such as dynamic absorbers and antiresonant isolators. The dynamic antiresonant vibration isolator (DAVI) and the nodale module are examples of the applications of transfer antiresonances. It is shown that antiresonances are eigenvalues, and that they can be determined by matrix iteration. Applications of antiresonance theory to helicopter engineering problems, using the antiresonant eigenvalue equation are suggested.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Ames Res. Center Rotorcraft Dyn.; p 101-106
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 56
    facet.materialart.
    Unknown
    Correlation of finite-element structural dynamic analysis with measured free vibration characteristics for a full-scale helicopter fuselage (1974)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The correlation achieved with each program provides the material for a discussion of modeling techniques developed for general application to finite-element dynamic analyses of helicopter airframes. Included are the selection of static and dynamic degrees of freedom, cockpit structural modeling, and the extent of flexible-frame modeling in the transmission support region and in the vicinity of large cut-outs. The sensitivity of predicted results to these modeling assumptions are discussed. Both the Sikorsky Finite-Element Airframe Vibration analysis Program (FRAN/Vibration Analysis) and the NASA Structural Analysis Program (NASTRAN) have been correlated with data taken in full-scale vibration tests of a modified CH-53A helicopter.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Ames Res. Center Rotorcraft Dyn.; p 67-80
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 57
    facet.materialart.
    Unknown
    Studies of liquid floating zones on SL-IV, the third Skylab mission (1974)
    In:  Other Sources
    Details
    Publication Date: 2019-01-25
    Description: The behavior of liquid floating zones in a zero-gravity environment was studied by Dr. E. Gibson on SL-4. These experiments were designed from the results of previous work on floating zones in a simulated zero-gravity model. Molten floating zones are used on earth for the crystal growth and zone refining of reactive materials. The Skylab studies give some insight into the problems associated with the development of the technique for the future space processing of materials. Preliminary results are presented on the stability of the liquid zone surface under static, rotational and vibrational conditions without gravitational constraints.
    Keywords: FLUID MECHANICS
    Type: NASA. Marshall Space Flight Center Proc. of the 3d Space Processing Symp. on Skylab Results, Vol. 2; p 837-856
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 58
    facet.materialart.
    Unknown
    Fluid motions in a low-G environment (1974)
    In:  Other Sources
    Details
    Publication Date: 2019-01-25
    Description: The importance of natural convection and other fluid motions in low-g space processing is now well recognized. Recent space experiments in the areas of natural convection and material processing, as well as results of theoretical studies, have yielded much needed information on fluid behavior in low-g environments. The state of knowledge of fluid motions in low-g environments is reviewed and the dimensional analysis approach used to assess the relative importances of various driving forces for fluid flow in four of the Skylab material processing experiments outlined. Results of dimensional analyses for the Skylab experiments, subsequently confirmed by actual space data, are presented. Finally, the limits of dimensional analysis in assessment studies are indicated.
    Keywords: FLUID MECHANICS
    Type: NASA. Marshall Space Flight Center Proc. of the 3d Space Processing Symp. on Skylab Results, Vol. 2; p 691-727
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 59
    facet.materialart.
    Unknown
    Transonic single-mode flutter and buffet of a low aspect ratio wing having a subsonic airfoil shape (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Transonic flutter and buffet results obtained from wind-tunnel tests of a low aspect ratio semispan wing model are presented. The tests were conducted to investigate potential transonic aeroelastic problems of vehicles having subsonic airfoil sections. The model employed NACA 00XX-64 airfoil sections in the streamwise direction and had a 14 deg leading edge sweep angle. Aspect ratio, and average thickness were 4.0, 0.35, and 8 percent, respectively. The model was tested at Mach numbers from 0.6 to 0.95 at angles of attack from 0 deg to 15 deg. Two zero lift flutter conditions were found that involved essentially single normal mode vibrations. With boundary layer trips on the model, flutter occurred in a narrow Mach number range centered at about Mach 0.90. The frequency and motion of this flutter were like that of the first normal mode vibration. With the trips removed flutter occurred at a slightly high Mach number but in a mode strongly resembling that of the second normal mode.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-TN-D-7346 , A-4966
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 60
    facet.materialart.
    Unknown
    Transverse vibrations of non-uniform beams (1974)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: The free vibrations of elastic beams with nonuniform characteristics are investigated theoretically by a new method. The new method is seen to combine the advantages of a finite element approach and of a Rayleigh-Ritz analysis. Comparison with the known analytical results for uniform beams shows good convergence of the method for natural frequencies and modes. For internal shear forces and bending moments, the rate of convergence is less rapid. Results from experiments conducted with a cantilevered helicopter blade with strong nonuniformities and also from alternative theoretical methods, indicate that the theory adequately predicts natural frequencies and mode shapes. General guidelines for efficient use of the method are presented.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Sound and Vibration; 37; Dec. 22
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 61
    facet.materialart.
    Unknown
    Experiments on confined turbulent jets in cross flow (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Results are reported of experiments on the effects of an opposite wall on the characteristics of turbulent jets injected into a cross flow, for unheated and heated jets. Longitudinal and transverse distributions of velocity and temperature are presented for single and multiple circular jets, and trajectories are presented for two-dimensional jets. The opposite wall has relatively little effect on a single jet unless the ratio of jet to cross flow momentum flux is large enough for the jet to impinge on the opposite wall. For a row of jets aligned perpendicularly to the cross flow, the opposite wall exerts progressively larger influence as the spacing between jets decreases. Much of the effect of jet and wall proximity can be understood by considering the interaction of the vortex flow which is the major feature of the structure of a single jet in a cross flow. Smoke photographs are shown to elucidate some of the interaction patterns.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-2392
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 62
    facet.materialart.
    Unknown
    Decay of far flow field in trailing vortices (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A finite difference machine code is used in the wake vortex problems in the quasi-cylindrical boundary layer approximation. A turbulent energy model containing new features is developed that accounts for the major effects disclosed by more advanced models in which the parameters are not yet established. Several puzzles that arose in previous theoretical investigations of wake vortices are resolved.
    Keywords: FLUID MECHANICS
    Type: NASA-TN-D-7568 , A-5181
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 63
    facet.materialart.
    Unknown
    Non-linear behavior of fiber composite laminates (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The non-linear behavior of fiber composite laminates which results from lamina non-linear characteristics was examined. The analysis uses a Ramberg-Osgood representation of the lamina transverse and shear stress strain curves in conjunction with deformation theory to describe the resultant laminate non-linear behavior. A laminate having an arbitrary number of oriented layers and subjected to a general state of membrane stress was treated. Parametric results and comparison with experimental data and prior theoretical results are presented.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-CR-2313 , TFR/7309
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 64
    facet.materialart.
    Unknown
    Failure criteria for viscoelastic materials (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Research projects concerned with developing a theory of fracture of materials are discussed. The effects of the geometry of the structure and the loads acting on the structure as they influence the failure process are analyzed. The effects of the viscoelastic deformation characteristics of the bulk elastomer on failure behavior are examined. Additional material parameters which control the fracture process are identified.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-CR-138125 , GALCIT-120
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 65
    facet.materialart.
    Unknown
    Advance development of a technique for characterizing the thermomechanical properties of thermally stable polymers (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The torsional braid experiment has been interfaced with a centralized hierarchical computing system for data acquisition and data processing. Such a system, when matched by the appropriate upgrading of the monitoring techniques, provides high resolution thermomechanical spectra of rigidity and damping, and their derivatives with respect to temperature.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-CR-138123
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 66
    facet.materialart.
    Unknown
    Effect of throttling on interface behavior and liquid residuals in weightlessness (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An experimental investigation was conducted to study liquid-vapor interface behavior and subsequent vapor ingestion in a flat-bottomed cylindrical tank following a single-step throttling in outflow rate in a weightless environment. A throttling process in which the final Weber number was one-tenth of the initial Weber number tended to excite large-amplitude symmetric slosh, with the amplitude generally increasing as initial Weber number increased. As expected, liquid residuals were lower than those obtained without throttling and, for moderate values of initial Weber number, could be adequately predicted by assuming that all draining took place at the final Weber number. At large values of Weber number, residuals tended to be lower than this predicted value.
    Keywords: FLUID MECHANICS
    Type: NASA-TM-X-3034 , E-7833
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 67
    facet.materialart.
    Unknown
    Comparison of measured and calculated velocity profiles of a laminar incompressible free jet at low Reynolds numbers (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A comparison of the measured and calculated velocity profiles of a laminar, incompressible, low Reynolds number jet is presented. The experimental jet was produced by a nozzle which consists of a porous metal plate covering the end of a pipe. This nozzle produces a uniform exit velocity profile at Reynolds numbers well below those at which conventional contoured nozzles are completely filled by the boundary layer. A jet mixing analysis based on the boundary-layer equations accurately predicted the velocity field for each test condition. The Reynolds number based on nozzle diameter ranged from 50 to 1000 with jet exit velocity either 30 or 61 m/s (100 or 200 ft/sec).
    Keywords: FLUID MECHANICS
    Type: NASA-TN-D-7510 , L-9277
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 68
    facet.materialart.
    Unknown
    An experimental investigation of wall boundary layer transition Reynolds numbers in an expansion tube (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Experimental measurements of boundary-layer transition in an expansion-tube test-gas flow are presented along with radial distributions of pitot pressure. An integral method for calculating constant Reynolds number lines for an expansion-tube flow is introduced. Comparison of experimental data and constant Reynolds number calculations has shown that for given conditions, wall boundary-layer transition occurs at a constant Reynolds number in an expansion-tube flow. Operating conditions in the expansion tube were chosen so that the effects of test-gas nonequilibrium on boundary-layer transition could be studied.
    Keywords: FLUID MECHANICS
    Type: NASA-TN-D-7541 , L-9337
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 69
    facet.materialart.
    Unknown
    The application of Riegels' rule and time-like damping to transonic flow calculations (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Finite difference relaxation solutions of the nonlinear small perturbation equations have proven reliable and successful in determining the transonic flowfields about thin airfoils. However, application of the small perturbation approach to thick airfoils usually results in an accuracy less than desirable. The incorporation of Riegels' Rule and time-like damping into the small perturbation approach and their application to thick and thin airfoils in transonic flow are discussed. Studies for thick and thin airfoils are presented. It is concluded that Riegels' Rule and damping should both be included in small perturbation transonic flow calculations.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-138181 , TAMRF-3033-7401 , AIAA Southwestern Student Paper Competition; Arlington, TX; United States
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 70
    facet.materialart.
    Unknown
    A weak interaction study of the viscous flow about oscillating airfoils (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An incompressible inviscid and a viscous flow calculation procedure is developed by assuming the viscous correction to the inviscid flow pressure distribution is small (weak interaction) to predict the flow about airfoils oscillating in pitch and heave. The calculations made in the investigation predict the detailed viscous flow regions including transition and separation phenomena and provide a detailed analysis of leading edge separation, transition, and reattachment. Results from the calculation show the leading edge viscous flow field to be quasi-steady although the imposed inviscid pressure distribution shows significant unsteady effects. Although unable to predict the flow field about a stalled airfoil, the indications are that the present procedure can indicate the onset of catastrophic flow separation.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-132425
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 71
    facet.materialart.
    Unknown
    Topics in structural dynamics: Nonlinear unsteady transonic flows and Monte Carlo methods in acoustics (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The results are reported of two unrelated studies. The first was an investigation of the formulation of the equations for non-uniform unsteady flows, by perturbation of an irrotational flow to obtain the linear Green's equation. The resulting integral equation was found to contain a kernel which could be expressed as the solution of the adjoint flow equation, a linear equation for small perturbations, but with non-constant coefficients determined by the steady flow conditions. It is believed that the non-uniform flow effects may prove important in transonic flutter, and that in such cases, the use of doublet type solutions of the wave equation would then prove to be erroneous. The second task covered an initial investigation into the use of the Monte Carlo method for solution of acoustical field problems. Computed results are given for a rectangular room problem, and for a problem involving a circular duct with a source located at the closed end.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-138110 , ESS-4022-113-74
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 72
    facet.materialart.
    Unknown
    Analysis of laminated, composite, circular cylindrical shells with general boundary conditions (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: This report develops: (1) a refined approximate theory for the static and dynamic analyses of finite, laminated, composite, circular cylindrical shells with general boundary conditions; (2) an exact three-dimensional analysis of simply supported, laminated, composite, circular cylindrical shells, and (3) a thin-shell theory for laminated, composite, circular cylindrical shells. In the refined approximate theory the displacements are assumed piecewise linear across the thickness and the effects of transverse shear deformations and transverse normal stress are included. A variational approach is followed to obtain the governing differential equations and boundary conditions. A general solution of the governing differential equations is also presented. The results obtained by using the refined approximate theory and the thin-shell theory are compared with the exact results for the case of free vibrations of simply supported, laminated, composite, circular cylindrical shells. The refined approximate theory is very accurate, even for thick shells with short nodal distances, whereas thin-shell theory is reasonably accurate only for thin shells at moderate nodal distances and wave number less than 2.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-TR-R-412 , L-8828
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 73
    facet.materialart.
    Unknown
    Holographic nondestructive tests performed on composite samples of ceramic-epoxy-fiberglass sandwich structure (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: When a hologram storing more than one wave is illuminated with coherent light, the reconstructed wave fronts interfere with each other or with any other phase-related wave front derived from the illuminating source. This multiple wave front comparison is called holographic interferometry, and its application is called holographic nondestructive testing (HNDT). The theoretical aspects of HNDT techniques and the sensitivity of the holographic system to the geometrical placement of the optical components are briefly discussed. A unique HNDT system which is mobile and possesses variable sensitivity to stress amplitude is discribed, the experimental evidence of the application of this system to the testing of the hidden debonds in a ceramic-epoxy-fiberglass structure used for sample testing of the radome of the Pershing missile system is presented.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-TR-R-430 , M-461
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 74
    facet.materialart.
    Unknown
    Procedures for experimental measurement and theoretical analysis of large plastic deformations (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Theoretical equations are derived and analytical procedures are presented for the interpretation of experimental measurements of large plastic strains in the surface of a plate. Orthogonal gage lengths established on the metal surface are measured before and after deformation. The change in orthogonality after deformation is also measured. Equations yield the principal strains, deviatoric stresses in the absence of surface friction forces, true stresses if the stress normal to the surface is known, and the orientation angle between the deformed gage line and the principal stress-strain axes. Errors in the measurement of nominal strains greater than 3 percent are within engineering accuracy. Applications suggested for this strain measurement system include the large-strain-stress analysis of impact test models, burst tests of spherical or cylindrical pressure vessels, and to augment small-strain instrumentation tests where large strains are anticipated.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-TM-X-3027 , E-7661
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 75
    facet.materialart.
    Unknown
    Analysis of three-point-bend test for materials with unequal tension and compression properties (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An analysis capability is described for the three-point-bend test applicable to materials of linear but unequal tensile and compressive stress-strain relations. The capability consists of numerous equations of simple form and their graphical representation. Procedures are described to examine the local stress concentrations and failure modes initiation. Examples are given to illustrate the usefulness and ease of application of the capability. Comparisons are made with materials which have equal tensile and compressive properties. The results indicate possible underestimates for flexural modulus or strength ranging from 25 to 50 percent greater than values predicted when accounting for unequal properties. The capability can also be used to reduce test data from three-point-bending tests, extract material properties useful in design from these test data, select test specimen dimensions, and size structural members.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-TN-D-7572 , E-7544
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 76
    facet.materialart.
    Unknown
    FORTRAN 4 programs for summarization and analysis of fracture trace and lineament patterns (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Systematic and detailed analysis of lineament and fracture trace patterns has long been neglected because of the large number of observations involved in such an analysis. Three FORTRAN 4 programs were written to facilitate this manipulation. TRANSFORM converts the initial fracture map data into a format compatible with AZMAP, whose options allow repetitive manipulation of the data for optimization of the analysis. ROSE creates rose diagrams of the fracture patterns suitable for map overlays and tectonic interpretation. Examples are given and further analysis techniques using output from these programs are discussed.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-TM-X-70596 , X-644-74-3
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 77
    facet.materialart.
    Unknown
    Sensitivity analysis of torsional vibration characteristics of helicopter rotor blades. Part 2: Aerodynamics and sensitivity analysis (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A theoretical investigation of dynamic response characteristics of rotor blades was carried out with special emphasis on torsional degrees-of-freedom. Coupled equations of motion for flapwise bending and torsion were formulated at varying azimuth positions for rotor blades with noncollinear aerodynamic, elastic and mass axes. Both structural and aerodynamic mass, damping and stiffness coefficients were included. The variations of a sample blade at different flight conditions were investigated from these equations. The obtained numerical results were illustrated. The sensitivity of overall blade vibration characteristics to torsional oscillations was also investigated from the equations of motion for the sample blade. The illustrated results show the importance of torsional degrees-of-freedom in rotor blade analysis. Various possibilities of improving the overall response by tuning blade geometric, structural and aerodynamic characteristics are discussed.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-CR-2380
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 78
    facet.materialart.
    Unknown
    Drag and distribution measurements of single-element fuel injectors for supersonic combustors (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The drag caused by several vortex generating fuel injectors for scramjet combustors was measured in a Mach 2 to 3.5 airstream. Injector drag was found to be strongly dependent on injector thickness ratio. The distribution of helium injected into the stream was measured both in the near field and the far field of the injectors for a variety of pressure ratios. The far field results differed appreciably from measurements in the near field. Injection pressure ratio was found to profoundly influence the penetration. One of the aerowing configurations tested yielded low drag consistent with desirable penetration and spreading characteristics.
    Keywords: FLUID MECHANICS
    Type: NASA-TM-X-3015 , E-7662
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 79
    facet.materialart.
    Unknown
    Numerical calculations of two dimensional, unsteady transonic flows with circulation (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The feasibility of obtaining two-dimensional, unsteady transonic aerodynamic data by numerically integrating the Euler equations is investigated. An explicit, third-order-accurate, noncentered, finite-difference scheme is used to compute unsteady flows about airfoils. Solutions for lifting and nonlifting airfoils are presented and compared with subsonic linear theory. The applicability and efficiency of the numerical indicial function method are outlined. Numerically computed subsonic and transonic oscillatory aerodynamic coefficients are presented and compared with those obtained from subsonic linear theory and transonic wind-tunnel data.
    Keywords: FLUID MECHANICS
    Type: NASA-TN-D-7605 , A-5265
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 80
    facet.materialart.
    Unknown
    Wind tunnel investigation of aerodynamic characteristics of a scale model of a D5 bulldozer and an M109 self-propelled 155 mm Howitzer (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Wind tunnel tests were conducted on a scale model of a D5 bulldozer and an M109 self-propelled 155 MM howitzer to determine the aerodynamic characteristics of these typical externally-suspended heavy lift helicopter cargo configurations. Tests were made over a large range of pitch and yaw attitudes at a nominal Reynolds number per unit length of 1.5 x 10 to the 6th power.
    Keywords: FLUID MECHANICS
    Type: NASA-TM-X-62330
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 81
    facet.materialart.
    Unknown
    Assembly and analysis of fragmentation data for liquid propellant vessels (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Fragmentation data was assembled and analyzed for exploding liquid propellant vessels. These data were to be retrieved from reports of tests and accidents, including measurements or estimates of blast yield, etc. A significant amount of data was retrieved from a series of tests conducted for measurement of blast and fireball effects of liquid propellant explosions (Project PYRO), a few well-documented accident reports, and a series of tests to determine auto-ignition properties of mixing liquid propellants. The data were reduced and fitted to various statistical functions. Comparisons were made with methods of prediction for blast yield, initial fragment velocities, and fragment range. Reasonably good correlation was achieved. Methods presented in the report allow prediction of fragment patterns, given type and quantity of propellant, type of accident, and time of propellant mixing.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-CR-134538
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 82
    facet.materialart.
    Unknown
    Stress anisotropy and concentration effects in high pressure measurements (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Sodium chloride is used as an internal pressure standard in high pressure research. Possible corrections are discussed which are needed in the calibration of this standard due to the independent effects of stress anisotropy and stress concentration in pressure vessels. The first is due to the lack of a truly hydrostatic state of stress in solid state pressure vessels. The second is due to the difference in the compressibilities between the pressure transmitting substances (sodium chloride) and a stiffer test specimen. These two corrections are then combined and a total correction, as a function of measured pressure, is discussed for two systems presently in use. The predicted value of the combined effect is about 5-10% of the pressure at 30 GPa.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-CR-142600 , REPT-2345
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 83
    facet.materialart.
    Unknown
    Elastic moduli of precompressed pyrophyllite used in ultrahigh pressure research (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The propagation of ultrasonic pulses in pyrophyllite specimens was studied to determine the effect of specimen precompression on the measured elastic moduli. Measurements were made at room pressure and, for the precompressed specimens, to pressures of 3 kbar. Pyrophyllite was found to be elastically anisotropic, apparently the result of the fabric present in our material. The room pressure adiabatic bulk modulus as measured on specimens made of isostatically compacted powered pyrophyllite was determined to be 96.1 kbar. The wave speeds of ultrasonic pulses in pyrophyllite were found to decrease with increasing specimen precompression. A limiting value of precompression was found, above which no further decrease in wave speed was observed. For the shear wave speeds this occurs at 10 kbar while for the longitudinal wave at 25 kbar. In the limit, the shear waves propagate 20% slower than in the unprecompressed samples; for the longitudinal wave the difference is 30%.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-CR-142598 , REPT-2366
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 84
    facet.materialart.
    Unknown
    Contact and crack problems for an elastic wedge (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The contact and the crack problems for an elastic wedge of arbitrary angle are considered. The problem is reduced to a singular integral equation which, in the general case, may have a generalized Cauchy kernel. The singularities under the stamp as well as at the wedge apex were studied, and the relevant stress intensity factors are defined. The problem was solved for various wedge geometries and loading conditions. The results may be applicable to certain foundation problems and to crack problems in symmetrically loaded wedges in which cracks initiate from the apex.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-CR-132640
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 85
    facet.materialart.
    Unknown
    Nonlinear cellular motions in Poiseuille channel flow (1974)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: In a number of nonlinear solutions to the equations of channel flow the velocity is decomposed into a mean part plus a nonlinear disturbance. The idea that nonlinear effects place a limitation on the amplitudes of the disturbance flow is considered. In the reported investigation the disturbance flow is represented by drastically limited Fourier expansions in the downstream coordinate. The resulting equations are solved numerically with high accuracy to obtain a good representation of the cross-stream structure of the solution. The results of the investigation show that indeed the nonlinear terms always limit the amplitude of the disturbance flow in this approximation.
    Keywords: FLUID MECHANICS
    Type: Journal of Fluid Mechanics; 64; June 19
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 86
    facet.materialart.
    Unknown
    Derivatives of eigenvalues and eigenvectors for a general matrix (1974)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: Expressions are obtained for the derivatives of the eigenvalues and eigenvectors which are expressions of only one left-hand and one right-hand eigenvector. The approach described makes use of a Choleski decomposition or some other decomposition method. The method may be extended to find any order of derivative of the eigenvalue and eigenvector. The expressions obtained for finding the derivatives of eigenvalues and eigenvectors for nonself-adjoint systems may be applied to self-adjoint systems.
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 12; May 1974
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 87
    facet.materialart.
    Unknown
    Computer extension and analytic continuation of Stokes' expansion for gravity waves (1974)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: Stokes' infinitesimal-wave expansion for steady progressive free-surface waves has been extended to high order using a computer to perform the coefficient arithmetic. Stokes' expansion has been found to be incapable of yielding the highest wave for any value of the water depth since convergence is limited by a square-root branch-point some distance short of the maximum. By reformulating the problem using a different independent parameter, the highest waves are obtained correctly. Series summation and analytic continuation are facilitated by the use of Pade approximants. The method is valid in principle for any finite value of the wavelength and solutions of high accuracy can be obtained for most values of the wave height and water depth.
    Keywords: FLUID MECHANICS
    Type: AD-A000773 , AFOSR-74-1574TR , Journal of Fluid Mechanics; 62; Feb. 11
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 88
    facet.materialart.
    Unknown
    An experimental-theoretical study of free vibrations of plates on elastic point supports (1974)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: A theoretical and experimental study is made to investigate the effect on plate vibrations of varying the stiffness of corner elastic point supports. An experiment is conducted in which the bending stiffness of horizontal beams is used to support a square plate at its four corners. The stiffness of these supports can be varied over such a range that the plate fundamental frequency is lowered to 40% of the rigid support frequency. The variation with support stiffness of the frequencies of the first eight plate modes is measured and is compared with results from a theoretical model in which a Rayleigh-Ritz analysis is used which approximates the plate mode shapes as products of free-free beam modes. The elastic point supports are modeled both as massless translational springs and springs with tip masses, which are included to better represent the experimental supports.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Sound and Vibration; 32; Feb. 22
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 89
    facet.materialart.
    Unknown
    Design manual: Oxygen Thermal Test Article (OTTA) (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The characteristics of a cryogenic tank for storing liquid hydrogen, nitrogen, oxygen, methane, or helium for an extended period of time with minimum losses are discussed. A description of the tank and control module, assembly drawings and details of major subassemblies, specific requirements controlling development of the system, thermal concept considerations, thermal analysis methods, and a record of test results are provided. The oxygen thermal test article thermal protection system has proven that the insulation system for cryogenic vessels is effective.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-CR-140209 , ER15961
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 90
    facet.materialart.
    Unknown
    Research on the elastic stability of large shells (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Tests were conducted to determine the elastic stability of large shell structures. The configuration of the shells and the instrumentation used in the measurements are described. The testing procedures are explained. Results of the stress analysis are plotted in polar graph form to show the areas of strain in micro inches at the outer surface of the skin and the inner lip of the stringer.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-CR-139665 , SAPR-6
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 91
    facet.materialart.
    Unknown
    Boundary-layer transition and displacement thickness effects on zero-lift drag of a series of power-law bodies at Mach 6 (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Wave and skin-friction drag have been numerically calculated for a series of power-law bodies at a Mach number of 6 and Reynolds numbers, based on body length, from 1.5 million to 9.5 million. Pressure distributions were computed on the nose by the inverse method and on the body by the method of characteristics. These pressure distributions and the measured locations of boundary-layer transition were used in a nonsimilar-boundary-layer program to determine viscous effects. A coupled iterative approach between the boundary-layer and pressure-distribution programs was used to account for boundary-layer displacement-thickness effects. The calculated-drag coefficients compared well with previously obtained experimental data.
    Keywords: FLUID MECHANICS
    Type: NASA-TN-D-7723 , L-9646
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 92
    facet.materialart.
    Unknown
    Method and apparatus for decoding compatible convolutional codes (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: This invention relates to learning decoders for decoding compatible convolutional codes. The decoder decodes signals which have been encoded by a convolutional coder and allows performance near the theoretical limit of performance for coded data systems. The decoder includes a sub-bit shift register wherein the received sub-bits are entered after regeneration and shifted in synchronization with a clock signal recovered from the received sub-bit stream. The received sub-bits are processed by a sub-bit decision circuit, entered into a sub-bit shift register, decoded by a decision circuit, entered into a data shift register, and updated to reduce data errors. The bit decision circuit utilizes stored sub-bits and stored data bits to determine subsequent data-bits. Data errors are reduced by using at least one up-date circuit.
    Keywords: STRUCTURAL MECHANICS
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 93
    facet.materialart.
    Unknown
    Turbulent transport of heat and momentum in a boundary layer subject to deceleration, suction and variable wall temperature (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The relationship between the turbulent transport of heat and momentum in an adverse pressure gradient boundary layer was studied. An experimental study was conducted of turbulent boundary layers subject to strong adverse pressure gradients with suction. Near-equilibrium flows were attained, evidenced by outer-region similarity in terms of defect temperature and defect velocity profiles. The relationship between Stanton number and enthalpy thickness was shown to be the same as for a flat plate flow both for constant wall temperature boundary conditions and for steps in wall temperature. The superposition principle used with the step-wall-temperature experimental result was shown to accurately predict the Stanton number variation for two cases of arbitrarily varying wall temperature. The Reynolds stress tensor components were measured for strong adverse pressure gradient conditions and different suction rates. Two peaks of turbulence intensity were found: one in the inner and one in the outer regions. The outer peak is shown to be displaced outward by an adverse pressure gradient and suppressed by suction.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-139655 , SU-HMT-17
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 94
    facet.materialart.
    Unknown
    Investigation of an anomalous flow condition of the Langley pilot model expansion tube (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Free-stream flow velocity measurements were made in the Langley pilot model expansion tube during the test flow interval. During this interval, an anomalous dip in pitot pressure occurs for the expansion tube operating conditions employed. Within the test flow interval, the main conclusions reached from comparison of the measured flow velocity, pitot pressure, and tube wall pressure are: the variations which occur in velocity and wall pressure are small compared with the variations in pitot pressure; a corresponding dip in the derived flow density is associated with the dip in pitot pressure; and the value of the average density over the interval, which results from the expansion from the shocked intermediate chamber condition, is approximately one-half of the value that can result from only an isentropic process.
    Keywords: FLUID MECHANICS
    Type: NASA-TN-D-7704 , L-9633
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 95
    facet.materialart.
    Unknown
    Boundary layer integral matrix procedure code modifications and verifications (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A summary of modifications to Aerotherm's Boundary Layer Integral Matrix Procedure (BLIMP) code is presented. These modifications represent a preliminary effort to make BLIMP compatible with other JANNAF codes and to adjust the code for specific application to rocket nozzle flows. Results of the initial verification of the code for prediction of rocket nozzle type flows are discussed. For those cases in which measured free stream flow conditions were used as input to the code, the boundary layer predictions and measurements are in excellent agreement. In two cases, with free stream flow conditions calculated by another JANNAF code (TDK) for use as input to BLIMP, the predictions and the data were in fair agreement for one case and in poor agreement for the other case. The poor agreement is believed to result from failure of the turbulent model in BLIMP to account for laminarization of a turbulent flow. Recommendations for further code modifications and improvements are also presented.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-120364 , AEROTHERM-74-95
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 96
    facet.materialart.
    Unknown
    Comparison of interference-free numerical results with sample experimental data for the AEDC wall-interference model at transonic and subsonic flow conditions (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Numerical results obtained from two computer programs recently developed with NASA support and now available for use by others are compared with some sample experimental data taken on a rectangular-wing configuration in the AEDC 16-Foot Transonic Tunnel at transonic and subsonic flow conditions. This data was used in an AEDC investigation as reference data to deduce the tunnel-wall interference effects for corresponding data taken in a smaller tunnel. The comparisons were originally intended to see how well a current state-of-the-art transonic flow calculation for a simple 3-D wing agreed with data which was felt by experimentalists to be relatively interference-free. As a result of the discrepancies between the experimental data and computational results at the quoted angle of attack, it was then deduced from an approximate stress analysis that the sting had deflected appreciably. Thus, the comparisons themselves are not so meaningful, since the calculations must be repeated at the proper angle of attack. Of more importance, however, is a demonstration of the utility of currently available computational tools in the analysis and correlation of transonic experimental data.
    Keywords: FLUID MECHANICS
    Type: NASA-TM-X-71991
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 97
    facet.materialart.
    Unknown
    Ultrasonic measurement of stress in railroad wheels and in long lengths of welded rail (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The failure of high speed emergency braking is discussed for railroad wheels and track. It is shown that high compressive residual stresses exist in the rims of new wheels which generate excessive heat, reducing the stress levels. Thermal stresses that build up in continuous lengths of welded track are reported and nondestructive methods of measuring stresses in thick steel are presented for identification, replacement, or adjustment before hazardous failures occur.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-TM-X-64863
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 98
    facet.materialart.
    Unknown
    Evaluation of a metal shear web selectively reinforced with filamentary composites for space shuttle application (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A final program summary is reported for test and evaluation activities that were conducted for space shuttle web selection. Large scale advanced composite shear web components were tested and analyzed to evaluate application of advanced composite shear web construction to a space shuttle orbiter thrust structure. The shear web design concept consisted of a titanium-clad + or - 45 deg boron/epoxy web laminate stiffened with vertical boron-epoxy reinforced aluminum stiffeners and logitudinal aluminum stiffening. The design concept was evaluated to be efficient and practical for the application that was studied. Because of the effects of buckling deflections, a requirement is identified for shear buckling resistant design to maximize the efficiency of highly-loaded advanced composite shear webs.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-CR-2409 , D180-17969-1
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 99
    facet.materialart.
    Unknown
    An experimental investigation of the flow field for double-wedge configurations in a Mach 4.97 stream (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The viscous-inviscid interactions which perturb the flow around the wing leading edge are discussed. The flow field perturbation results when the fuselage-generated shock wave interacts with the wing-generated shock wave. Three types of shock interference patterns are possible for the wing leading edge of the orbiter.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-134386 , REPT-74003
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 100
    facet.materialart.
    Unknown
    Quantized vortices around wavefront nodes, 2 (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Quantized vortices can occur around nodal points in wavefunctions. The derivation depends only on the wavefunction being single valued, continuous, and having continuous first derivatives. Since the derivation does not depend upon the dynamical equations, the quantized vortices are expected to occur for many types of waves such as electromagnetic and acoustic. Such vortices have appeared in the calculations of the H + H2 molecular collisions and play a role in the chemical kinetics. In a companion paper, it is shown that quantized vortices occur when optical waves are internally reflected from the face of a prism or particle beams are reflected from potential energy barriers.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-139530 , WIS-TCI-515
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...