ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • ENERGY PRODUCTION AND CONVERSION  (1,329)
  • AERODYNAMICS  (761)
  • INSTRUMENTATION AND PHOTOGRAPHY
  • 2005-2009
  • 1980-1984  (2,557)
  • 1970-1974
  • 1925-1929
  • 2007
  • 1982  (1,156)
  • 1980  (1,401)
Collection
Keywords
Years
  • 2005-2009
  • 1980-1984  (2,557)
  • 1970-1974
  • 1925-1929
Year
  • 1
    facet.materialart.
    Unknown
    In-flight lift and drag measurements on a first generation jet transport equipped with winglets (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A KC-135A aircraft equipped with wing tip winglets was flight tested to demonstrate and validate the potential performance gain of the winglet concept as predicted from analytical and wind tunnel data. Flight data were obtained at cruise conditions for Mach numbers of 0.70, 0.75, and 0.80 at a nominal altitude of 36,000 ft. and winglet configurations of 15 deg cant/-4 deg incidence, 0 deg cant/-4 deg incidence, and baseline. For the Mach numbers tested the data show that the addition of winglets did not affect the lifting characteristics of the wing. However, both winglet configurations showed a drag reduction over the baseline configuration, with the best winglet configuration being the 15 deg cant/-4 deg incidence configuration. This drag reduction due to winglets also increased with increasing lift coefficient. It was also shown that a small difference exists between the 15 deg cant/-4 deg incidence flight and wind tunnel predicted data. This difference was attributed to the pillowing of the winglet skins in flight which would decrease the winglet performance.
    Keywords: AERODYNAMICS
    Type: KC-135 Winglet Program Rev.; p 103-116
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 2
    facet.materialart.
    Unknown
    KC-135 winglet program overview (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A joint NASA/USAF program was conducted to accomplish the following objectives: (1) evaluate the benefits that could be achieved from the application of winglets to KC-135 aircraft; and (2) determine the ability of wind tunnel tests and analytical analysis to predict winglet characteristics. The program included wind-tunnel development of a test winglet configuration; analytical predictions of the changes to the aircraft resulting from the application of the test winglet; and finally, flight tests of the developed configuration. Pressure distribution, loads, stability and control, buffet, fuel mileage, and flutter data were obtained to fulfill the objectives of the program.
    Keywords: AERODYNAMICS
    Type: KC-135 Winglet Program Rev.; p 1-46
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 3
    facet.materialart.
    Unknown
    KC-135 wing and winglet flight pressure distributions, loads, and wing deflection results with some wind tunnel comparisons (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A full-scale winglet flight test on a KC-135 airplane with an upper winglet was conducted. Data were taken at Mach numbers from 0.70 to 0.82 at altitudes from 34,000 feet to 39,000 feet at stabilized flight conditions for wing/winglet configurations of basic wing tip, 15/-4 deg, 15/-2 deg, and 0/-4 deg winglet cant/incidence. An analysis of selected pressure distribution and data showed that with the basic wing tip, the flight and wind tunnel wing pressure distribution data showed good agreement. With winglets installed, the effects on the wing pressure distribution were mainly near the tip. Also, the flight and wind tunnel winglet pressure distributions had some significant differences primarily due to the oilcanning in flight. However, in general, the agreement was good. For the winglet cant and incidence configuration presented, the incidence had the largest effect on the winglet pressure distributions. The incremental flight wing deflection data showed that the semispan wind tunnel model did a reasonable job of simulating the aeroelastic effects at the wing tip. The flight loads data showed good agreement with predictions at the design point and also substantiated the predicted structural penalty (load increase) of the 15 deg cant/-2 deg incidence winglet configuration.
    Keywords: AERODYNAMICS
    Type: KC-135 Winglet Program Rev.; p 47-102
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 4
    facet.materialart.
    Unknown
    On the cause of the flat-spot phenomenon observed in silicon solar cells at low temperatures and low intensities (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A model that explains the flat-spot power loss phenomenon is presented. Evidence suggests that the effect is due to localized metallurgical interactions between the silicon substrate and the contact metallization. These reactions are shown to result in localized regions in which the P-N junction is destroyed and replaced with a metal semiconductor-like interface. The effects of thermal treatment, crystallographic orientation, junction depth, and metallization are shown along with a method of preventing the effect through the suppression of vacancy formation at the free surface of the contact metallization. Data indicating the effectiveness of a TiN diffusion barrier in preventing the effect are also given.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p 65-70
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 5
    facet.materialart.
    Unknown
    NASA solar array flight experiment (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The NASA large flexible solar array space shuttle flight experiment is described. The 32 x 4 m wing is deployed from the shuttle bay, and experiments in electrical output, multiple deployment, and structural dynamics are planned. Both 2 x 4 cm and 5.9 x 5.9 cm cell assemblies on the array blanket are evaluated. Safety/hazards provisions are described, including emergency jettison provisions. Ground testing and hardware fabrication are summarized.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p 179-184
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 6
    facet.materialart.
    Unknown
    Large area low-cost space solar cell development (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A development program to produce 5.9 x 5.9 cm space quality silicon solar cells with a cost goal of 30 $/W is described. Cell types investigated include wraparound dielectric, mechanical wraparound and conventional contact configurations with combinations of 2 or 10 ohm/cm resistivity, back surface reflectors and/or fields, and diffused or ion implanted junctions. A single step process to cut cell and cover glass simultaneously is being developed. Results for cell and array tests are given. Large solar arrays that might use cells of this type are discussed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p 23-26
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 7
    facet.materialart.
    Unknown
    The swing to concentrator arrays (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Objectives and progress in both low concentration ratio (6 to 10) and high concentration ratio ( 100) array developments are summarized. Problems encountered include: thermal control, maldistribution of concentrated sunlight, current busing, and optical surface degradation. The potential advantages over planar arrays are an order of magnitude reduction in per unit cost of power plus increased immunity to radiation damage.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p xix-xxiv
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 8
    facet.materialart.
    Unknown
    Determination of the efficiency of a proportional counter for detecting X-rays (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A parallel beam of X-rays (approximately monoenergetic) passing through a rectangular slit and scattering from two flat mirrors comprise the X-ray test. The two mirrors are arranged in a periscope geometry so that the final reflected beam is parallel to the incident beam but displaced laterally by given amount. One of the detectors used to intercept the reflected X-rays is a one dimensional gas-filled proportional counter which is sensitive to the position (in 1 dimension) at which the X-rays are incident within its detecting "window". The total length of the anode wire of the proportional counter is 120 mm and this length can be divided electronically into a maximum of 1,024 parts. Hence, the output of an experimental run would be the number of incident X-rays that registered on each of the 1,024 channels. Each channel would represent an X-ray at a different spatial location and, hence, at a different scattering angle. In order to look at a wider range of scattering angles, the detector is placed on an optical table which can be rotated.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Alabama Univ. in Huntsville The 1981 NASA(ASEE Summer Fac. Fellowship Program; 6 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 9
    facet.materialart.
    Unknown
    Performance of the continuous flow diffusion chambers (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A brief comparative description is made of the chambers. Overall, comparisons for the various types of experiments - monodisperse, polydisperse and ambient aerosol - showed agreement among these chambers to within 15% in most cases. A careful analysis of the results indicated that a proper accounting of certain parameters would bring about much closer agreement among four of these instruments.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: The Third Intern. Cloud Condensation Nuclei Workshop; p 79-84
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 10
    facet.materialart.
    Unknown
    Determination of optimum sunlight concentration level in space for 3-5 cascade solar cells (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Current-voltage curves were calculated for each cell in a cascade structure using a solar cell diode equation and superposition. Terms for the light generated current, diffusion current, space charge recombination current and series and shunt resistance are included. Individual current voltage curves are added in series with ohmic resistance losses for the cell interconnects to obtain the cascade cell performance. Temperature was varied with concentration, using several models, and ranged from 55 C at one Sun to between 80 and 200 C at 100 Suns. A variety of series resistance and internal resistances were used. Coefficients of the diffusion and recombination terms are strongly temperature dependent. The study indicates that maximum efficiency (30%) occurs in the 50 to 100X Sun concentration range, provided series resistance is below 0.015 ohm-sq cm and cell temperature is 80 C at 100 Suns.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p 265-270
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 11
    facet.materialart.
    Unknown
    Effects of processing and dopant on radiation damage removal in silicon solar cells (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Gallium and boron doped silicon solar cells, processed by ion implantation followed by either laser or furnace anneal were irradiated by 1 MeV electrons and their postirradiation recovery by thermal annealing was determined. During the postirradiation anneal, gallium doped cells prepared by both processes recovered more rapidly and exhibited none of the severe reverse annealing observed for similarly processed 2 ohm-cm boron doped cells. Ion implanted furnace annealed 0.1 ohm-cm boron doped cells exhibited the lowest post-irradiation annealing temperatures after irradiation. The drastically lowered recovery temperature is attributed to the reduced oxygen and carbon content of the 0.1 ohm-cm cells. Analysis based on defect properties and annealing kinetics indicates that further reduction in annealing temperature is attainable with further reduction in the silicon's carbon and/or divacancy content after irradiation.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p 89-93
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 12
    facet.materialart.
    Unknown
    Design, installation and operating experience of 20 photovoltaic medical refrigerator systems on four continents (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The NASA Lewis Research Center in cooperation with the World Health Organization, U.S.A. I.D., the Pan American Health Organization and national government agencies in some developing countries sponsored the installation of twenty photovoltaic powered medical vaccine storage refrigerator-freezer (R/F) systems. The Solar Power Corporation was selected as the contractor to perform the design, development and installation of these twenty units. Solar Power's experiences are described herein.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 13
    facet.materialart.
    Unknown
    Development of a photovoltaic module qualification test based on combined-environment accelerated stress data (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The U.S. Coast Guard has developed a qualification test to screen photovoltaic modules for utilization on marine aids to navigation. The test is based on a combined-environment of hot and cold saltwater immersion and air pressurization. The test has demonstrated a very high acceleration factor and excellent correlation of electrical failures with modules in a concurrent real-time marine exposure.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 14
    facet.materialart.
    Unknown
    Design principles for high efficiency small-grain polysilicon solar cells, with supporting experimental studies (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Design principles suggested here aim toward high conversion efficiency (greater than 15 percent) in polysilicon cells. The principles seek to decrease the liabilities of both intragranular and grain-boundary-surface defects. The advantages of a phosphorus atom concentration gradient in a thin (less than 50 microns) base of a p(+)/n(x)/n(+) drift-field solar cell, which produces favorable gradients in chemical potential, minority-carrier mobility and diffusivity, and recombination lifetime (via phosphorus gettering) are suggested. The degrading effects of grain boundaries are reduced by these three gradients and by substituting atoms (P, H, F or Li) for vacancies on the grain-boundary surface. From recent experiments comes support for the benefits of P diffusion down grain boundaries and, for quasi-grain-boundary-free and related structures. New analytic solutions for the n(x)-base include the effect of a power-law dependence between P concentration and lifetime. These provide an upper-bound estimate on the open circuit voltage. Finite-difference numerical solutions of the six Shockley equations furnish complete information about all solar-cell parameters and add insight concerning design.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 15
    facet.materialart.
    Unknown
    Residential photovoltaic power conditioning technology for grid connected applications (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Major advances in photovoltaic (PV) Power Conditioning (PC) with respect to performance and low-cost potential have been made. Solutions have been obtained to interface and control problems related to adapting available inverter designs to the grid-connected, residential photovoltaic experiments. A description is presented to contributing research and development activities. Attention is given to aspects of residential systems experience, conceptual design studies, questions of optimum topology development, and promising advanced designs for residential PV provided by development efforts of the private sector.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 16
    facet.materialart.
    Unknown
    Design solutions for the solar cell interconnect fatigue fracture problem (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Mechanical fatigue of solar cell interconnects is a major failure mechanism in photovoltaic arrays. A comprehensive approach to the reliability design of interconnects, together with extensive design data for the fatigue properties of copper interconnects, has been published. This paper extends the previous work, developing failure prediction (fatigue) data for additional interconnect material choices, including aluminum and a variety of copper-Invar and copper-steel claddings. An improved global fatigue function is used to model the probability-of-failure statistics of each material as a function of level and number of cycles of applied strain. Life-cycle economic analyses are used to evaluate the relative merits of each material choce. The copper-Invar clad composites demonstrate superior performance over pure copper. Aluminum results are disappointing.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 17
    facet.materialart.
    Unknown
    Optimal design of high-efficiency tandem cells (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Computer analysis indicates that a substantial increase in solar cell conversion efficiencies can be achieved by using two-cell, multi-bandgap tandem structures instead of single-junction cells. Practical AM1 efficiencies of about 30 percent at one sun and over 30 percent at multiple suns are to be expected. The further increases in efficiency calculated for a three-cell tandem structure are much smaller and may not justify the added complexity. For inexpensive two-cell tandem modules, Si is preferred for the bottom cell, and the top-cell material should have a bandgap of 1.75 to 1.80 eV. The GaAs-AlAs and GaAs-GaP systems are very attractive candidates for the top cell. Significant advances have been achieved in growing GaAs on Ge-coated Si substrates (for the two-terminal, two-cell structure) and in growing free-standing ultrathin GaAs layers (for the two-terminal or four-terminal structures). These advances should be transferable to the GaAs-AlAs and GaAs-GaP systems.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 18
    facet.materialart.
    Unknown
    Characterization of the electrical output of flat-plate photovoltaic arrays (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The electric output of flat-plate photovoltaic arrays changes constantly, due primarily to changes in cell temperature and irradiance level. As a result, array loads such as direct-current to alternating-current power conditioners must be able to accommodate widely varying input levels, while maintaining operation at or near the array maximum power point.The results of an extensive computer simulation study that was used to define the parameters necessary for the systematic design of array/power-conditioner interfaces are presented as normalized ratios of power-conditioner parameters to array parameters, to make the results universally applicable to a wide variety of system sizes, sites, and operating modes. The advantages of maximum power tracking and a technique for computing average annual power-conditioner efficiency are discussed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 19
    facet.materialart.
    Unknown
    Studies of upper atmosphere motions by VHF backscatter (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA, Washington Upper Atmosphere Res. Program; p 240-241
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 20
    facet.materialart.
    Unknown
    Halogen Occultation Experiment (HALOE) (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA, Washington Upper Atmosphere Res. Program; p 236-237
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 21
    facet.materialart.
    Unknown
    Solar Mesosphere Explorer (SME) (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA, Washington Upper Atmosphere Res. Program; p 238-239
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 22
    facet.materialart.
    Unknown
    Application Explorer Mission 2 (AEM 2), Stratospheric Aerosol and Gas Experiment (SAGE) (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA, Washington Upper Atmosphere Res. Program; p 234-235
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 23
    facet.materialart.
    Unknown
    The Solar Backscatter Ultraviolet (SBUV) and Total Ozone Mapping Spectrometer (TOMS) experiment on Nimbus 7 (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA, Washington Upper Atmosphere Res. Program; p 231
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 24
    facet.materialart.
    Unknown
    Stratospheric Aerosol Measurement 2 (SAM 2) (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA, Washington Upper Atmosphere Res. Program; p 229-230
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 25
    facet.materialart.
    Unknown
    The Stratospheric and Mesospheric Sounder (SAMS) experiment on Nimbus 7 (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA, Washington Upper Atmosphere Res. Program; p 232-233
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 26
    facet.materialart.
    Unknown
    Limb Infrared Monitor of the Stratosphere (LIMS) experiment (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA, Washington Upper Atmosphere Res. Program; p 227-228
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 27
    facet.materialart.
    Unknown
    Spacelab payload definition: Cryogenic Limb-Scanning Interfermeter and Radiometer (CLIR) (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA, Washington Upper Atmosphere Res. Program; p 221-223
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 28
    facet.materialart.
    Unknown
    Improved measurement and calibration for stratospheric trace species (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA, Washington Upper Atmosphere Res. Program; p 148
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 29
    facet.materialart.
    Unknown
    Laboratory study of resonance fluorescence (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA, Washington Upper Atmosphere Res. Program; p 130-131
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 30
    facet.materialart.
    Unknown
    Photoionization mass spectrometry (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA, Washington Upper Atmosphere Res. Program; p 16
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 31
    facet.materialart.
    Unknown
    Three-layer interactive method for computing supersonic laminar separated flows (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: An interactive model for numerical computation of complicated two-dimensional flowfields including regions of reversed flow is proposed. The present approach is one of dividing the flowfield into three regions, in each of which a simplified mathematical model is applied: (1) outer, supersonic flow for which the full potential equation (hyperbolic) is used; (2) viscous, laminar layer in which the compressible boundary-layer model (parabolic) is used; and (3) recirculating flow modeled by the incompressible Navier-Stokes equations (elliptic). For matching of the numerical solutions in the three layers, two interaction models are developed: one for pressure interaction, the other for interaction between the shear layer and the recirculating flow. The uniform solution for the whole flowfield is then obtained by iteration of the local solutions under the constraints imposed by matching. The three-layer interactive model is used for solution of the flowfield past an asymmetric cavity. The method is shown to be capable of dealing with backflow without encountering problems at separation, characteristic to the boundary-layer approach.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 18; Nov. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 32
    facet.materialart.
    Unknown
    Recent assessment of the performance and accuracy of a chemiluminescent rocket sonde for upper atmospheric ozone measurements (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The chemiluminescent rocket ozonesonde utilizing rhodamine-B as a detector and self-pumping for air sampling has been improved. The instrument employs standard meteorological sounding systems and is the only technique available for routine nighttime ozone measurements above balloon altitudes. The chemiluminescent detector, when properly calibrated, is shown to be specific to ozone, stable, and of sufficient sensitivity for accurate measurements of ozone from about 65-20 km. An error analysis indicates that the measured ozone profiles have an absolute accuracy of about + or - 12% and a precision of about + or - 6%. Approximately 20 flights have been conducted for geophysical investigations, while additional flights were conducted with other rocket and satellite ozone soundings for comparisons. In general, these comparisons showed good agreement.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Review of Scientific Instruments; 51; Oct. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 33
    facet.materialart.
    Unknown
    Circular-scan streak tube with solid-state readout (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A circular-scan streak tube designed for use in a laser ranging system is described. Electrostatic focusing is used between the photocathode and a microchannel plate, and electrons from the microchannel plate are proximity focused onto an output phosphor screen. Electron beam deflection is achieved by driving two orthogonal sets of deflection plate assemblies in phase quadrature at a frequency of 200 MHz. The light intensity in the output beam trace is measured by using a circular Reticon array of 720 photodiodes, which is fiber-optically coupled to the output phosphor screen of the tube. Sample measurements of frequency-doubled Nd:YAG laser-pulse waveforms are given. Also the output beamwidth has been measured at the 200-MHz deflection frequency. The results suggest a limiting resolution of 33 psec for the circular-scan streak tube used for these tests.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 19; Oct. 15
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 34
    facet.materialart.
    Unknown
    Oil film thickness measurement using airborne laser-induced water Raman backscatter (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The use of laser-induced water Raman backscatter for remote thin oil film detection and thickness measurement is reported here for the first time. A 337.1-nm nitrogen laser was used to excite the 3400-cm-1 OH stretch band of natural ocean water beneath the oil slick from an altitude of 150 m. The signal strength of the 381-nm water Raman backscatter was always observed to depress when the oil was encountered and then return to its original undepressed value after complete aircraft traversal of the floating slick. After removal of background and oil fluorescence contributions, the ratio of the depressed-to-undepressed airborne water Raman signal intensities, together with laboratory measured oil extinction coefficients, is used to calculate the oil film thickness.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 19; Oct. 1
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 35
    facet.materialart.
    Unknown
    Atmospheric laser Doppler velocimetry - An overview (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Research, development, and application of atmospheric laser Doppler velocimetry are overviewed. Consideration is given to operation principles of CO2 heterodyne systems. Global wind, pollution, V/STOL flow, and true airspeed measurements are outlined. Wind energy, dust devils, water spouts, tornadoes, and aircraft wake vortices are covered.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Optical Engineering; 19; July-Aug
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 36
    facet.materialart.
    Unknown
    Development of a pulsed 9.5 micron lidar for regional scale O3 measurement (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A pulsed infrared lidar system designed for application to the remote sensing of atmospheric trace gases from an airborne platform is described. The system is also capable of measuring the infrared backscatter characteristics of the ocean surface, terrain, cloud, and aerosol targets. The lidar employed is based on dual wavelength pulse energy measurements in the 9-11 micrometer wavelength region.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Optical Engineering; 19; July-Aug
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 37
    facet.materialart.
    Unknown
    Three-dimensional imaging of X-ray and gamma-ray objects in real time (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A simple device is described that is capable of providing real-time 3-D viewing of extended X-ray and gamma-ray objects. The visible-light images produced by the device are not merely stereoscopic, i.e., one perspective, but possess both horizontal and vertical parallax with a reasonably large field of view.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 19; Sept. 1
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 38
    facet.materialart.
    Unknown
    Grid polarizers for infrared Fourier spectrometers (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Infrared grid polarizers consisting of copper lines with a 3.6-micron grid constant on a 4-micron-thick Mylar polyester substrate have been prepared by the techniques of photolithography and sputter-etching. Their polarization properties have been measured and found to be suitable for use at infrared frequencies below 700/cm. The polarizers have been used to extend the useful frequency range of a Martin-Puplett polarizing interferometer designed for Fourier transform spectroscopy. The efficiency of the interferometer has been measured over a frequency range from 50 to 700/cm and compared to that of a conventional Michelson interferometer. The results are shown to be consistent with the measured properties of the polarizers. Methods are suggested for improving the efficiency of a Martin-Puplett interferometer which employs these polarizers.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Infrared Physics; 20; July 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 39
    facet.materialart.
    Unknown
    Absolute line strengths in nu4, /C-12/H4 - A dual-beam diode laser spectrometer with sweep integration (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A tunable diode laser spectrometer with several unique features has been developed for use in the middle IR. The all-reflective optical system has a dual-beam configuration before the dispersive mode selector to eliminate transit-angle errors at the calibration etalon. By maintaining separated beams through the mode selector, beam combiner losses are avoided. Averaging successive sweeps of the current-modulated laser permits stable reproducible spectral integrations, eliminating etalon thermal errors and producing high photometric sensitivity. Line strengths have been measured using this instrument for eleven transitions in nu4 of (C-12)H4. These include R0 and R1 and nine P-branch transitions in the 1202-1263-per cm range. Techniques for measuring strengths with a diode laser are discussed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 19; Aug. 15
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 40
    facet.materialart.
    Unknown
    Sampling submicrometer particles suspended in near sonic and supersonic free jets (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Aerosols containing solid, spherical stearic acid particles with a mean diameter of 0.8 micron and a geometric standard deviation of 1.28 were sampled with small bore front-facing aspirating probes in near-sonic and supersonic unheated free jets. The results are compared to compute the sampling error associated with a high-speed jet sample.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Air Pollution Control Association; vol. 30
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 41
    facet.materialart.
    Unknown
    Measurement of the specific refractivities of CF4 and C2F6 (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: In order to relate the measured fringe shift of an interferometer to the density of a medium, the relation between density and refractive index, which is expressed by the specific refractivity, must be known. In the present paper, the specific refractivities of the wind tunnel test gases CF4 and C2F6 are determined in order to verify estimations based on the atomic refractivities of carbon and fluorine. A Twyman-Green two-beam interferometer with a 633-nm He-Ne laser light source was used to measure the specific refractivity as a function of fringe shift as the density of the gas was changed. Values of 0.122 and 0.131 cu cm/g were obtained for CF4 and C2F6 respectively at a temperature of 300 K, which are within 1% of the values computed from the atomic refractivities.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Journal of Chemical Physics; 73; July 15
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 42
    facet.materialart.
    Unknown
    Implications for the UK of solar-power satellites /s.p.s/ as an energy source (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The solar power satellite concept which would make the sun's radiation available on earth as a source of energy, is discussed. Attention is given to the concept currently under evaluation in the USA, and also in Europe, though to a lesser extent. The advantages and problems associated with its adoption by the UK as a major source of electrical energy are discussed. The discussion covers topics such as sizing, reference system, and construction, costs, and problem areas.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 43
    facet.materialart.
    Unknown
    Absorption coefficient instrument for turbid natural waters (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The paper presents an instrument that directly measures multispectral absorption coefficient of turbid natural water. Attention is given to the design, which is shown to incorporate methods for the compensation of variation in the internal light source intensity, correction of the spectrally dependent nature of the optical elements, and correction for variation in the background light level. In addition, when used in conjunction with a spectrally matched total attenuation instrument, the spectrally dependent scattering coefficient can also be derived. Finally, it is reported that systematic errors associated with multiple scattering have been estimated using Monte Carlo techniques.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 19; May 15
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 44
    facet.materialart.
    Unknown
    Noise radiation from the side edges of flaps (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The recently observed phenomenon of high noise radiation from the side edges of flaps in flow is investigated by way of a simple two-dimensional model problem. The model is based upon a physical picture of boundary layer vorticity being swept around the edge by spanwise flow on the flap. The model problem is developed and solved and the resulting noise radiation calculated. Further, a mathematical condition for the vortex to be captured by the potential flow and swept around the edge is derived. The results show that the sound generation depends strongly upon the strength of the vorticity and distance from the edge and that it can be more intense than the more common trailing edge noise source in agreement with the experimental observations.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 18; May 1980
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 45
    facet.materialart.
    Unknown
    Stability aspects of diverging subsonic flow (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The paper describes the computation of two-dimensional, subsonic, diverging internal flows and how they differ from the corresponding converging flows. Such diverging or decelerating flows occur in such obvious places as subsonic diffusers and inlets; however, such flows also occur in supersonic nozzles in the presence of a normal shock. The flow instability and its relation to the numerical method used, boundary conditions, and viscous effects are assessed both analytically and numerically. The inviscid flow is shown to be physically unstable and a poor representation of the true viscous flow.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 18; May 1980
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 46
    facet.materialart.
    Unknown
    Solar cell performance at low illumination and temperature for deep-space applications (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: (Previously cited in issue 12, p. 2037, Accession no. A81-29543)
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 47
    facet.materialart.
    Unknown
    Single crystal growth of upgraded metallurgical silicon by HEM for photovoltaic applications (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Commercially available metallurgical grade (MG) silicon has high B and P content which is not reduced significantly by directional solidification. By choosing high purity raw materials for an experimental Submerged Electrode Arc Furnace, most of the impurities are reduced to 10 ppmw. Directional solidification of upgraded metallurgical grade (UMG) silicon by the Heat Exchanger Method (HEM) has produced 16 cm x 16 cm cross section ingots with nearly single crystal structure. The main problem encountered during directional solidification was SiC impurities dispersed through the structure. Solar cells fabricated from UMG silicon that was directionally solidified twice by HEM have shown up to 12.33% (am1) conversion efficiency.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Silicon Ingot Casting, Phase 3 and Phase 4; 12 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 48
    facet.materialart.
    Unknown
    Origin of SiC impurities in silicon crystals grown from the melt in vacuums (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A main source of high carbon levels in silicon crystals grown from melt under reduced pressures and contained in silica crucibles supported by graphite retainer/susceptor was identified by thermodynamic analysis. The calculations were verified by experimental results and the carbon level is reduced by approximately 50% with the use of molybdenum retainers.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Crystal Systems, Inc. Silicon Ingot Casting, Phase 3 and Phase 4; 5 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 49
    facet.materialart.
    Unknown
    Silicon crystal growth in vacuum (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The most developed process for silicon crystal growth is the Czochralski (CZ) method which was in production for over two decades. In an effort to reduce cost of single crystal silicon for photovoltaic applications, a directional solidification technique, Heat Exchanger Method (HEM), was adapted. Materials used in HEM and CZ furnaces are quite similar (heaters, crucibles, insulation, etc.). To eliminate the cost of high purity argon, it was intended to use vacuum operation in HEM. Two of the major problems encountered in vacuum processing of silicon are crucible decomposition and silicon carbide formation in the melt.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Silicon Ingot Casting, Phase 3 and Phase 4; 4 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 50
    facet.materialart.
    Unknown
    Part 2: Multi-wire slicing. Fixed Abrasive Slicing Technique (FAST) (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The Fixed Abrasive Slicing Techniques (FAST) is a new slicing technique that was developed to slice ingots more effectively. It was demonstrated that 25 wafers/cm can be sliced from 10cm diameter and 19 wafers/cm from 15 cm diameter ingots. Over 99% yield (222 out of a possible 224) was demonstrated during slicing of a 10 cm diameter ingots at 25 wafers/cm. The average thickness of wafers was 0.249 mm and the kerf was 0.151 mm. Slicing rates as high as 0.14 mm/min were also demonstrated for 10 cm diameter ingots.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Silicon Ingot Casting, Phase 3 and Phase 4; 67 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 51
    facet.materialart.
    Unknown
    Silicon slicing by fixed abrasive slicing technique (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: One of the major cost factors in silicon ingot technology adaptation for terrestrial photovoltaic application is in slicing boules into wafers. The most developed industrial practice is the Internal Diameter (ID) slicing. This method utilizes diamond cutting. The diamond stands up for long periods, hence, the cost of expendable materials is low. However, the ID technology as practiced today has poor material utilization. The Multiblade Slurry (MBS) method has low equipment and labor costs but its expendable material costs are high. Recently Multiwire Slurry (MWS) technology has shown very good material utilization, but its expendable material costs are even higher than MBS. The multiwire Fixed Abrasive Slicing Technique (FAST) still in advanced development stage, combines the low expendable material costs of ID method, the low labor and equipment costs of MBS and high material utilization of MWS.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Silicon Ingot Casting, Phase 3 and Phase 4; 3 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 52
    facet.materialart.
    Unknown
    Part 1: Silicon ingot casting. Heat Exchanger Method (HEM) (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Directional solidification by the Heat Exchanger Method (HEM) is a viable approach for directional solidification of silicon ingots used for terrestrial solar cell applications. Some of the significant advances made during this phase of the program were: ingot size, 34 cm x 34 cm x 17 cm - 45 kg, usable material yield - 90%, solar cell efficiency averaged over the whole ingot - 85% of control CZ (35 kg ingot), very uniform resistivity over the boule, and cycle time for 36 kg ingots - 56 hours. Some of the problems encountered were growth rate decrease with increased ingot height, silicon carbide precipitates, and high dislocation density in HEM material. The silicon carbide is attributed to backstreaming of oil vapors from the vacuum pump; the high dislocation density is associated with the thermal history of the boule.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Silicon Ingot Casting, Phase 3 and Phase 4; 111 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 53
    facet.materialart.
    Unknown
    An economic evaluation of solar energy (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The economic advantages of solar dish collectors are evaluated and compared with other energy systems. Labor, inflation and energy deregulation are considered.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Ann. Program Rev., Proc.; p 329-338
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 54
    facet.materialart.
    Unknown
    Potential benefits from a successful solar thermal program (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Solar energy systems were investigated which complement nuclear and coal technologies as a means of reducing the U.S. dependence on imported petroleum. Solar Thermal Energy Systems (STES) represents an important category of solar energy technologies. STES can be utilized in a broad range of applications servicing a variety of economic sectors, and they can be deployed in both near-term and long-term markets. The net present value of the energy cost savings attributable to electric utility and IPH applications of STES were estimated for a variety of future energy cost scenarios and levels of R&D success. This analysis indicated that the expected net benefits of developing an STES option are significantly greater than the expected costs of completing the required R&D. In addition, transportable fuels and chemical feedstocks represent a substantial future potential market for STES. Due to the basic nature of this R&D activity, however, it is currently impossible to estimate the value of STES in these markets. Despite this fact, private investment in STES R&D is not anticipated due to the high level of uncertainty characterizing the expected payoffs.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 295-318
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 55
    facet.materialart.
    Unknown
    Dish Stirling system integration and test progress report (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The integration and check-out of a complete Dish Solar Stirling Thermal Power System is described. The preliminary results of the tests conducted thus far are presented. The results are very encouraging and show promise of high performance and efficiency. The outstanding performance and durability of the 4-95 Stirling engine was the highlight of this 6 month integration and test activity. Exposure to severe heat, dust, sand and wind during the summer months and heavy rains, high winds, including sand storms and freezing cold in recent months did affected the engine or the receiver in any noticable manner.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 191-200
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 56
    facet.materialart.
    Unknown
    Recent tests on the Carter small reciprocating steam engines (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The Jay Carter Enterprises (JCE) Paratransit Vehicle steam engine was tested over a range of conditions which might be experienced by the power converter subsystem of the Small Community Solar Thermal Power Experiment. Some difficulties were encountered getting the engine ready for testing. These difficulties were related to the five year dormancy of the entire system and to incomplete development work that had been going on at the time of cessation of steam engine work at JCE. Other difficulties were related to the fact that the particular expander being tested never ran before and possessed some manufacturing defects. Nevertheless, the engine was operated successfully and results of testing do verify results of computer simulations of the engine in regard to the effect of temperature and power level variations. Engine efficiency was good but generally lower than expected and performance dropped as testing continued. The effect of change in expansion ratio was not demonstrated because of deterioration in engine performance. Post-test inspection revealed numerous correctable defects.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 123-145
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 57
    facet.materialart.
    Unknown
    High-temperature ceramic heat exchanger element for a solar thermal receiver (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A study was performed by AiResearch Manufacturing Company, a division of The Garrett Corporation, on the development a high-temperature ceramic heat exchanger element to be integrated into a solar receiver producing heated air. A number of conceptual designs were developed for heat exchanger elements of differing configuration. These were evaluated with respect to thermal performance, pressure drop, structural integrity, and fabricability. The final design selection identified a finned ceramic shell as the most favorable concept. The shell is surrounded by a larger metallic shell. The flanges of the two shells are sealed to provide a leak-tight pressure vessel. The ceramic shell is to be fabricated by an innovative combination of slip casting the receiver walls and precision casting the heat transfer finned plates. The fins are bonded to the shell during firing. The unit is sized to produce 2150 F ar at 2.7 atm pressure, with a pressure drop of about 2 percent of the inlet pressure. This size is compatible with a solar collector providing a receiver input of 85 kw(th). Fabrication of a one-half scale demonstrator ceramic receiver has been completed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 233-246
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 58
    facet.materialart.
    Unknown
    Modifications and testing of a 4-95 Stirling engine for solar applications (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The modifications and testing of a standard Stirling engine, required for connection to a 25 kW induction alternator, for use with a solar thermal parabolic dish electric module is described. Power was absorbed by a GE induction alternator connected to the utility grid. Also included are the results from recent testing of another solar engine at the DOE-Georgia Tech solar site. It was done in parallel with the testing at Edwards for the purpose of comparing performance of two solar-only receivers, which were based on the standard 4-95 involute heat exchanger.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 179-189
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 59
    facet.materialart.
    Unknown
    Verification testing of the PKI collector at Sandia National Laboratories, Albuquerque, New Mexico (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Verification testing of a solar collector was undertaken prior to its operation as part of an industrial process heat plant at Capitol Concrete Products in Topeka, Kansas. Testing was performed at a control plant installed at Sandia National Laboratory, Albuquerque, New Mexico (SNLA). Early results show that plant performance is even better than anticipated and far in excess of test criteria. Overall plant efficiencies of 65 to 80 percent were typical during hours of good insolation. A number of flaws and imperfections were detected during operability testing, the most important being a problem in elevation drive alignment due to a manufacturing error. All problems were corrected as they occurred and the plant, with over 40 hours of operation, is currently continuing operability testing in a wholly-automatic mode.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 115-118
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 60
    facet.materialart.
    Unknown
    Organic Rankine power conversion subsystem development for the small community solar thermal power system (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The development and preliminary test results for an air-cooled, hermetically sealed 20 kW sub E organic Rankine cycle engine/alternator unit for use with point focussing distributed receiver solar thermal power system. A 750 F toluene is the working fluid and the system features a high speed, single-stage axial flow turbine direct-coupled to a permanent magnet alternator. Good performance was achieved with the unit in preliminary tests.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 101-113
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 61
    facet.materialart.
    Unknown
    A transmittance-optimized, point-focus Fresnel lens solar concentrator (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The development of a point-focus Fresnel lens solar concentrator for high-temperature solar thermal energy system applications is discussed. The concentrator utilizes a transmittance-optimized, short-focal-length, dome-shaped refractive Fresnel lens as the optical element. This concentrator combines both good optical performance and a large tolerance for manufacturing, deflection, and tracking errors. The conceptual design of an 11-meter diameter concentrator which should provide an overall collector efficiency of about 70% at an 815 C (1500 F) receiver operating temperature and a 1500X geometric concentration ratio (lens aperture area/receiver aperture area) was completed. Results of optical and thermal analyses of the collector, a discussion of manufacturing methods for making the large lens, and an update on the current status and future plans of the development program are included.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 35-47
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 62
    facet.materialart.
    Unknown
    Programmable temperature control system for biological materials (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A system was constructed which allows programmable temperature-time control for a 5 cu cm sample volume of arbitrary biological material. The system also measures the parameters necessary for the determination of the sample volume specific heat and thermal conductivity as a function of temperature, and provides a detailed measurement of the temperature during phase change and a means of calculating the heat of the phase change. Steady-state and dynamic temperature control is obtained by supplying heat to the sample volume through resistive elements constructed as an integral part of the sample container. For cooling purposes, this container is totally immersed into a cold heat sink. Using a mixture of dry ice and alcohol at 79 C, the sample volume can be controlled from +40 to -60 C at rates from steady state to + or - 65 C/min. Steady-state temperature precision is better than 0.2 C, while the dynamic capability depends on the temperature rate of change as well as the mass of both the sample and the container.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: IEEE Transactions on Biomedical Engineering; BME-29; Aug. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 63
    facet.materialart.
    Unknown
    Turbulence amplification in shock-wave boundary-layer interaction (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Attention is directed to the acoustics research of the 1950s and 1960s for guidance in understanding and quantizing the turbulence amplification that can occur in regions of shock-wave boundary-layer interaction. Three primary turbulence amplifier-generator mechanisms are identified and shown, by linear analysis, to be responsible for turbulence amplification across a shock wave in excess of 100% of the incident turbulence intensity.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 20; July 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 64
    facet.materialart.
    Unknown
    Lightning protection of wind turbines (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Possible damages to wind turbine components due to lightning strikes are discussed and means to prevent the damage are presented. A low resistance path to the ground is noted to be essential for any turbine system, including metal paths on nonmetal blades to conduct the strike. Surge arrestors are necessary to protect against overvoltages both from utility lines in normal operation and against lightning damage to control equipment and contactors in the generator. MOS structures are susceptible to static discharge injury, as are other semiconductor devices, and must be protected by the presence of static protection circuitry. It is recommended that the electronics be analyzed for the circuit transient response to a lightning waveform, to induced and dc current injection, that input/output leads be shielded, everything be grounded, and lightning-resistant components be chosen early in the design phase.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 65
    facet.materialart.
    Unknown
    Effect of thickness on silicon solar cell efficiency (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A computer-aided-design study on the dependence of the efficiency peak of a back-surface field solar cell on the concentrations of the recombination and dopant impurities is presented. The illuminated current-voltage characteristics of more than 100 cell designs are obtained using the transmission line circuit model to numerically solve the Shockley equations. Using an AM 1 efficiency of 17% as a target value, it is shown that the efficiency versus thickness dependence has a broad maximum which varies by less than 1% over more than a three-to-one range of cell thicknesses from 30 to 100 microns. An optically reflecting back surface will give only a slight improvement of AM 1 efficiency, about 0.7%, in this thickness range. Attention is given to the dependence of the efficiency on patchiness across the back-surface field low-high junction in thin cells.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: IEEE Transactions on Electron Devices; ED-29; May 1982
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 66
    facet.materialart.
    Unknown
    An instrument for measuring thermal inertia in the field (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Features and test results of a thermal inertial meter (TIM) for cataloging the thermal inertial of surface material in situ as a basis for satellite remote sensing of geologic materials are described. The instrument is employed to determine the temperature rise of the materials in the field, with the assumptions that the sample and a standard are homogeneous in composition, the heat flux density is constant at the surface of each material, and the specimens are thick enough to be treated as semi-infinite bodies. A formula for calculating thermal inertia is presented, and the components of the TIM are detailed. A box with three compartments, two holding standards, is placed on the sample surface with the third compartment open to the specimen. Dolomite and quartz are used as references when all samples are measured after heating. Tests with rocks and sand in Nevada and California revealed that chert has a higher thermal inertia than barite.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Photogrammetric Engineering and Remote Sensing; 48; Apr. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 67
    facet.materialart.
    Unknown
    Low cost silicon-on-ceramic photovoltaic solar cells (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A technique has been developed for coating low-cost mullite-based refractory substrates with thin layers of solar cell quality silicon. The technique involves first carbonizing one surface of the ceramic and then contacting it with molten silicon. The silicon wets the carbonized surface and, under the proper thermal conditions, solidifies as a large-grained sheet. Solar cells produced from this composite silicon-on-ceramic material have exhibited total area conversion efficiencies of ten percent.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 68
    facet.materialart.
    Unknown
    Large wind-turbine projects in the United States wind energy program (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The technological development of large, horizontal-axis wind turbines (100 kW-2500 kW) is surveyed with attention to prototype projects managed by NASA. Technical feasibility has been demonstrated in utility service for systems with a rated power of up to 200 kW and a rotor diameter of 125 ft (Mod-OA). Current designs of large wind turbines such as the 2500 kW Mod-2 are projected to be cost competitive for utility applications when produced in quantity, with capital costs of 600 to 700 dollars per kW (in 1977 dollars).
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Journal of Industrial Aerodynamics; 5; May 1980
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 69
    facet.materialart.
    Unknown
    HOE/lensless matched spatial filter wavelength-scaling correlator (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A scaling correlator optical pattern recognition system is described in which a lensless matched spatial filter (with the second Fourier transform lens and the matched spatial filter recorded on the same plate) is used with a first Fourier transform lens that is also an holographic optical element. The matched spatial filter is recorded at one wavelength and correlation is obtained at a second wavelength. Experimental demonstration and output correlation SNR data are reported, together with a comparison of the system's noise level using conventional optics and holographic elements.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Optics Communications; 34; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 70
    facet.materialart.
    Unknown
    Quantitative analysis of autoradiographic image intensification using Thiourea-S35 (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Photographic images enhanced by the method of Thiourea-S35 autoradiography are evaluated in terms of signal-to-noise ratio, detective quantum efficiency (DQE), and Wiener spectrum analysis using digitized images. It is determined that the original signal-to-noise ratio is not degraded by the intensification process which allows an increase in the practical working DQE as a function of density. These results apply at all spatial frequencies that were tested. The advantage given by autoradiography is the ability to produce usable images from emulsions originally exposed to the low densities corresponding to maximum DQE and movement of faint image densities above the level of the threshold for detection.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Astronomical Society of the Pacific; vol. 92
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 71
    facet.materialart.
    Unknown
    Aliasing and blurring in 2-D sampled imagery (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The quality of image reconstructions from discrete data suffers not only from the blurring of spatial detail caused by limitations in the spatial frequency response of electrooptical systems, but also from the aliasing generated if spatial detail has been undersampled. Previous studies have observed that reasonable spot intensity profiles and photosensor aperture shapes of equivalent size result in about equal blurring but that some profiles and shapes suppress aliasing better than others. This paper presents quantitative results of the magnitude of aliasing and blurring as a function of random radiance fields typical for natural scenes and of spatial responses and sampling intervals typical for TV cameras and optical-mechanical scanners. These results indicate that aliasing may often be a larger source of degradation than either blurring or electronic noise.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 19; July 1
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 72
    facet.materialart.
    Unknown
    The effects of titanium impurities in N/+//P silicon solar cells (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Microscopic and electrical measurements were performed to explain the degradation mechanisms associated with the presence of titanium impurities in silicon. The measurements included X-ray topography, transmission electron microscopy, and deep level transient spectroscopy, before and after processing. The results indicated the presence of TiO2 precipitates, the density of which increased after phosphorus diffusion. A majority carrier trapping level was observed in the wafers before processing. It was concluded that 10% of the Ti in the N(+)/P silicon solar cells formed electrically active centers which caused degradation of the cell junction. 14% of the remaining Ti precipitated out as TiO2, forming electrically active defects, which also caused junction degradation.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Electrochemical Society; vol. 127
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 73
    facet.materialart.
    Unknown
    Apparatus for trapping and thermal detection of atomic hydrogen in high magnetic fields at low temperatures (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: An apparatus is described in which hydrogen atoms were trapped at temperatures down to 1.1 K in the 11 T field of a large volume superconducting magnet. A high sensitivity thermal detector was used to study trapping and recombination of atoms on the detector surface. The apparatus permits the application of extremely high steady state magnetic fields to study the potential effects of electron spin polarization on the stabilization of hydrogen atoms.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Review of Scientific Instruments; 51; May 1980
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 74
    facet.materialart.
    Unknown
    Laser measurement of extinction coefficients of highly absorbing liquids (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A coaxial dual-channel laser system has been developed for the measurement of extinction coefficients of highly absorbing liquids. An empty wedge-shaped sample cell is first translated laterally through a He-Ne laser beam to measure the differential thickness using interference fringes in reflection. The wedge cell is carefully filled with the oil sample and translated through the coaxially positioned dye laser beam for the differential attenuation or extinction measurement. Optional use of the instrumentation as a single-channel extinction measurement system and also as a refractometer is detailed. The system and calibration techniques were applied to the measurement of two crude oils whose extinction values were required to complete the analysis of airborne laser data gathered over four controlled spills.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 19; Apr. 1
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 75
    facet.materialart.
    Unknown
    The influence of a voltage ramp on the measurement of I-V characteristics of a solar cell (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: For efficiency and convenience the voltage applied to a Si solar cell is often fairly rapidly driven from zero to the open circuit value typically at a common rate of 1 V per millisecond. During this time the values of current are determined as a function of the instantaneous voltage thus producing an I-V characteristic. The present paper shows that the customary expressions for the current as a function of cell parameters still remain valid provided that the diffusion length in the expression for the dark current is changed from its steady state value L to the effective diffusion length L1 given by L1 = L(1 + qV/kT.tau) to the -1/2, where V is the ramp rate considered constant and tau is the lifetime of minority carriers. This result is true to a very good approximation provided that low level injection prevails.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Solid-State Electronics; 23; Mar. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 76
    facet.materialart.
    Unknown
    Nuclear Science Symposium, 26th and Symposium on Nuclear Power Systems, 11th, San Francisco, Calif., October 17-19, 1979, Proceedings (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The paper covers the studies presented on nuclear science and nuclear power systems symposiums. The studies deal with nuclear radiation detectors, nuclear circuits and systems, space and medical instrumentation, as well as with environmental and reactor instrumentation. Data preprocessing and acquisition are discussed. Emphasis is placed on the engineered safety features of nuclear systems.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 77
    facet.materialart.
    Unknown
    Computational aerodynamics on large computers (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Three examples of advances in computational aerodynamics; (1) three-dimensional inviscid transonic analysis, (2) design calculations for wings, and (3) the computation of viscous-induced aileron buzz, are reviewed. Attention is given to wing surface pressures, design optimization, computer memory, speed and advanced solution methods on parallel computer architecture. It is determined that many implicit approximate-factorization schemes, that have been developed for Navier-Stokes equations, can be coded to run efficiently on microprocessors.
    Keywords: AERODYNAMICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 78
    facet.materialart.
    Unknown
    Wall proximity corrections for hot-wire readings in turbulent flows (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: This note describes some details of recent (successful) attempts of wall proximity corrections for hot-wire measurements performed in a three-dimensional incompressible turbulent boundary layer. A simple and quite satisfactory method of estimating wall proximity effects on hot-wire readings is suggested.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: DISA Information; Feb. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 79
    facet.materialart.
    Unknown
    Wing flapping with minimum energy (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A technique employed by Prandtl and Munk is adapted for the case of a wing in flapping motion to determine its lift distribution. The problem may be reduced to one of minimizing induced drag for a specified and periodically varying bending moment at the wing root. It is concluded that two wings in close tandem arrangement, moving in opposite phase, would eliminate the induced aerodynamic losses calculated
    Keywords: AERODYNAMICS
    Type: Aeronautical Journal; 84; July 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 80
    facet.materialart.
    Unknown
    Measurement of dielectric properties and determination of microwave emissivity of polluted waters (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The dielectric properties of polluted waters are measured with a reflection-type resonant cavity at 1.43 GHz. Very small water samples in quartz tubes of known volume are placed in the center of the maximum electric field. Measurement of the resonance-frequency variation and a change of the cavity's quality factor are used to determine the dielectric properties. The microwave emissivity of the polluted water is then calculated via the Fresnel equation and applied to data reductions of microwave radiometer measurements.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 81
    facet.materialart.
    Unknown
    Interactions of efficiency and material requirements for terrestrial silicon solar cells (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The transport velocity transformation method was used to analyze solar cell designs to determine optimum cell structures. It was found that low resistivity materials should be used up to the onset of Auger recombination; a properly designed three-layer structure permits base region approaching an ideal device in performance; and that higher resistivity front regions will need more sophisticated grid metallization structures than those used now. It was concluded that new features will provide idealized silicon cell structures yielding airmass 1 efficiencies in the 24-26.5% range, with real efficiencies near 22%.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 82
    facet.materialart.
    Unknown
    A unifying study of tandem-junction, front-surface-field, and interdigitated-back-contact solar cells (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Solid-State Electronics; 23; Nov. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 83
    facet.materialart.
    Unknown
    Control of volume resistivity in inorganic-organic separators (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Control of resistivity in NASA inorganic-organic separators is achieved by incorporating small percentages of high surface area, fine-particle silica with other ingredients in the separator coating. The volume resistivity appears to be predictable from coating composition, that is, from the surface area of filler particles in the coating. The approach has been applied to two polymer-'plasticizer'-filler coating systems, where the filler content of each is below the generally acknowledged critical pigment volume concentration of the coating. Application of these coating systems to 0.0254 cm thick (10 mil) fuel-cell grade asbestos sheet produces inexpensive, flexible, microporous separators that perform at least as well as the original inorganic-organic concept, the Astropower separator.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Electrochemical Society; vol. 127
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 84
    facet.materialart.
    Unknown
    The effect of finite turbulence spatial scale on the amplification of turbulence by a contracting stream (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The turbulence downstream of a rapid contraction is calculated for the case when the turbulence scale can have the same magnitude as the mean-flow spatial scale. The approach used is based on the formulation of Goldstein (1978) for turbulence downstream of a contraction, with the added assumptions of a parallel mean flow at downstream infinity and turbulence calculated far enough downstream so that the nonuniformity of the mean flow field has decayed, and by treating the inverse contraction ratio as a small parameter. Consideration is given to the large-contraction-ratio and classical rapid-distortion theory limits, and to results at an arbitrary contraction ratio. It is shown that the amplification effect of the contraction is reduced when the spatial scale of the turbulence increases, with the upstream turbulence actually suppressed for a contraction ratio less than five and a turbulence spatial scale greater than three times the transverse dimensions of the downstream channel.
    Keywords: AERODYNAMICS
    Type: Journal of Fluid Mechanics; 98; June 12
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 85
    facet.materialart.
    Unknown
    Limits to the NEP of an intracavity LiNbO3 upconverter (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Limits to low noise equivalent power (NEP) operation of a lithium niobate upconverter are investigated. Upconversion is achieved inside the optical cavity of an Ar-ion laser. Limits to NEP are imposed by limits to conversion efficiency and by noise present in the upconversion process. Conversion efficiency is limited by thermal effects in the lithium niobate. Thermally induced wedging, focusing, and aberrations are caused by the lithium niobate absorption at the 514.5-nm argon pump wavelength. The primary component of noise in the upconverter is due to upconversion of thermal radiation from the lithium niobate crystal. The lowest NEP, at a wavelength of 3.4 microns, achieved in this study was 8.9 x 10 to the -14th W/(Hz to the 1/2 power).
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 86
    facet.materialart.
    Unknown
    Types of leeside flow over delta wings (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: It is noted that so far most systematic investigations on the lee side flow over delta wings at supersonic speeds are concerned with flat upper surfaces. On the basis of these results, the paper makes an attempt to characterize the different types of flow over a wing with a delta-shaped upper surface by varying a number of parameters. It is concluded that the work should be considered a first step toward systematizing the flow over delta-shaped lee sides as well.
    Keywords: AERODYNAMICS
    Type: Zeitschrift fuer Flugwissenschaften und Weltraumforschung; 4; Mar
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 87
    facet.materialart.
    Unknown
    A PPM modulator and demodulator for the 2.5 bit/detected photon demonstration (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: In addition to performing the basic pulse position modulation and demodulation, the hardware described also indicates the occurrence of erasures and errors of various types. The analyzer portion of the circuit counts the number of pulses received in a word, demodulates a second input pulse (if one is received), indicates the occurrence of erasures, and detects PPM word errors. Word errors are detected by comparing the modulator input word to the corresponding demodulator output. These functions are provided mainly for testing and diagnosis of the system during the feasibility demonstration period.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: The Telecommun. and Data Acquisition Rept.; p 50-54
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 88
    facet.materialart.
    Unknown
    SPF/DB titanium concepts for structural efficiency foi HC (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Illustrations for a presentation on superplastic forming/diffusion bonding titanium design concepts are presented. Sandwich skin panels with hat section, semicircular corrugation, sine wave, and truss cores are shown. The fabrication of wing panels is illustrated, and applications to the design of advanced variable sweep bombers summarized.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Research Center Laminar Flow Control; p 95-110
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 89
    facet.materialart.
    Unknown
    SPF/DB titanium LFC porous panel concept (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Illustrations for a presentation demonstrating superplastic forming/diffusion bonding titanium porous panels are presented. Fabrication phases, sandwich panels, load bearing qualities, microstructure, and panel surface after finishing are illustrated.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Research Center Laminar Flow Control; p 111-138
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 90
    facet.materialart.
    Unknown
    Master timing system measurements (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The test results indicate that the system performs within the specifications established. The overall system appears to be well designed and built to a good commercial grade. The triple redundant time code generators, whose outputs are majority voted, performed adequately as far as could be determined on an operational situation.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: The Telecommun. and Data Acquisition Rept.; p 70-74
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 91
    facet.materialart.
    Unknown
    X-29A forward-swept-wing demonstrator airplane (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The X-29A is a technology demonstrator. The FSW is just one of the technologies. Others include the following: discrete variable camber, relaxed static stability, triplex digital fly-by-wire (FBW) control system, variable-incidence/close-coupled canard, aeroelastically tailored composite wing, and thin supercritical airfoil. The growth potential for additional technologies is shown.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Research Center Wind-Tunnel(Flight Correlation, 1981; p 177-189
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 92
    facet.materialart.
    Unknown
    Opportunities for wind-tunnel/flight correlation with new Boeing airplanes (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The use of correlated data in airplane development is discussed. Areas of interest include initial airworthiness of an aircraft, low-speed configuration optimization, and high-speed configuration optimization. Data from wind tunnel tests are shown to be significant when applied to guarantee compliance, which includes fuel consumption, airspeeds, and takeoff and landing performance. The use of correlation in achieving FAA certification is also discussed.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Research Center Wind-Tunnel-Flight Correlation, 1981; p 141-157
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 93
    facet.materialart.
    Unknown
    F-15 wind-tunnel/flight correlations (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: F-15 correlation data for longitudinal control and inlet-ramp effectiveness, and horizontal-tail setting for trim are presented. The Reynolds number effect on airfoil laminar bubble burst is included.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Research Center Wind-Tunnel(Flight Correlation, 1981; p 109-115
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 94
    facet.materialart.
    Unknown
    Wind-tunnel/flight correlation program on XB-70-1 (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The XB-70-1 was selected for a wind-tunnel/flight correlation program as representative of a large, flexible supersonic airplane similar to a supersonic transport. Tests were made to determine the effects of control deflections, wing tip deflection, and variations in inlet mass flow (additive drag).
    Keywords: AERODYNAMICS
    Type: Wind-Tunnel(Flight Correlation, 1981; p 65-91
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 95
    facet.materialart.
    Unknown
    Solid-state retrodirective phased array concepts for microwave power transmission from Solar Power Satellite (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Two prototype solid-state phased array systems concepts for potential use in the Solar Power Satellite are described. In both concepts, the beam is centered on the rectenna by means of phase conjugation of a pilot signal emanating from the ground. Also discussed is on-going solid-state amplifier development.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Johnson Space Center Workshop on Microwave Power Transmission and Reception; p 279-298
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 96
    facet.materialart.
    Unknown
    SPS solid state antenna power combiner (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Solid state dc-rf converters offer potential improvements in reliability, mass and low voltage operation, provided that anticipated efficiencies in excess of 80 percent can be realized. Field effect transistors offer the greatest potential in the SPS frequency band at 2.45 GHz. To implement this approach it is essential that means be found to sum the power of many relatively low power solid state sources in a low-loss manner, and that means be provided to properly control the phase of the outputs of the large number of solid state sources required. To avoid the power combining losses associated with circuit hybrids it was proposed that the power from multiple solid state amplifiers be combined by direct coupling of each amplifier's output to the radiating antenna structure. The selected power-combining antenna consists of a unique printed (metalized) microstrip circuit on a ceramic type dielectric substrate which is backed by a shallow lightweight aluminum cavity which sums the power of four microwave sources. The antenna behaves like two one-half wavelength slot-line antennas coupled together via their common cavity structure.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Johnson Space Center Workshop on Microwave Power Transmission and Reception; p 268-277
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 97
    facet.materialart.
    Unknown
    Session on solid state: Introduction (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The possibilities of using solid state devices as part of the Satellite Solar Power System are discussed. Solid state advantages and disadvantages are presented along with two potential concepts for use of solid state in the system design.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Workshop on Microwave Power Transmission and Reception; p 253-257
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 98
    facet.materialart.
    Unknown
    Method for precision forming of low-cost, thin-walled slotted waveguide arrays for the SPS (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A method for the precision-forming of thin-walled, slotted-waveguide arrays was devised. Models were constructed with temporary tools and evaluated. The application of the method to the SPS requirements is discussed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Johnson Space Center Workshop on Microwave Power Transmission and Reception; p 188-190
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 99
    facet.materialart.
    Unknown
    Evaluation of thick wall wave guide element (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The SPS transmitting array requires an architecture which will provide a low weight, high efficiency and high structural rigidity. As noted above, waveguide slot arrays constitute the most desirable option. Consequently, such an array has been chosen for the SPS. Waveguide slot arrays offer high efficiency, uniform illumination, are are fairly lighweight. Bandwidths of such arrays are narrow, typically 1/2-2%. Although this does not directly impact the SPS, which transmits power at a single frequency of 2.45 GHz, the narrow bandwidth does constrain the thermal and mechanical tolerances of the antenna. The purpose of this program is to better define the electronic aspects of an SPS specific waveguide slot array. The specific aims of the program are as follows: (1) To build a full-scale half-module, 10 stick, array, the design parameters for which are to be determined by analytical considerations tempered by experimental data on a single slotted radiating stick, (2) To experimentally evaluate the completed array with respect to antenna pattern, impedance and return loss, and (3) To measure swept transmission amplitude and phase to provide a data base for design of a receiving antenna.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Johnson Space Center Workshop on Microwave Power Transmission and Reception; p 180-187
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 100
    facet.materialart.
    Unknown
    SPS antenna element evaluation (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The SPS transmitting array requires an architecture which will provide a low weight, high efficiency and high structural rigidity. Waveguide slot arrays constitute the most desirable option. Consequently, such an array was chosen for the SPS. Waveguide slot arrays offer high efficiency, uniform illumination, and are fairly lightweight. Bandwidths of such arrays are narrow, typically 1/2-2%. Although this does not directly impact the SPS, which transmits power at a single frequency of 2.45 GHz, the narrow bandwidth does constrain the thermal and mechanical tolerances of the antenna. The purpose of this program is to better define the electronic aspects of an SPS specific waveguide slot array. The specific aims of the program are as follows: (1) To build a full-scale half-module, 10 stick, array, the design parameters for which are to be determined analytical considerations tempered by experimental data on a single slotted radiating stick, (2) To experimentally evaluate the completed array with respect to antenna pattern, impedance and return loss; and (3) To measure swept transmission amplitude and phase to provide a data base for design of a receiving antenna.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: NASA. Johnson Space Center Workshop on Microwave Power Transmission and Reception 158-165 (SEE N82-12538 03-44)
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...