ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • AERODYNAMICS  (852)
  • 1975-1979  (852)
  • 1955-1959
  • 1979  (471)
  • 1978  (381)
Collection
Keywords
Years
  • 1975-1979  (852)
  • 1955-1959
Year
  • 1
    facet.materialart.
    Unknown
    A parametric experimental study of the slotted-wall boundary condition (1978)
    In:  CASI
    Details
    Publication Date: 2006-02-22
    Description: An experimental study of slotted upper and lower walls in a two dimensional transonic wind tunnel with solid sidewalls is reported. Results are presented for several slot spacings and slot openness ratios. The experimental data were pressure measurements which were made on an airfoil model and on a sidewall near one of the slotted walls. The slotted-wall boundary condition coefficient, which related the pressure and streamline curvature near the wall, was determined from the wall pressure measurements. The measured wall-induced interference was correlated with the experimental values for the boundary condition coefficient. This correlation was compared with theory.
    Keywords: AERODYNAMICS
    Type: Advanced Technol. Airfoil Res., Vol. 1, Pt. 2; p 459-471
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 2
    facet.materialart.
    Unknown
    A procedure for analyzing transonic flow over harmonically oscillating airfoils (1978)
    In:  CASI
    Details
    Publication Date: 2006-02-22
    Description: Finite difference procedures were successfully used to solve the steady transonic flow about airfoils and appear to provide a practical means for calculating the corresponding unsteady flow. The purpose of the paper is to describe a finite difference procedure derived from the equations for the potential flow by assuming small perturbations and harmonic motion. The velocity potential is divided into steady and unsteady parts, and the resulting unsteady equation is linearized on the basis of small amplitudes of oscillation. The steady velocity potential, which must be calculated first, is described by the classical nonlinear transonic differential equation.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Res. Center Advanced Technol. Airfoil Res., Vol. 1, Pt. 2; p 657-670
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 3
    facet.materialart.
    Unknown
    Section drag coefficients from pressure probe transverses of a wing wake at low speeds (1978)
    In:  CASI
    Details
    Publication Date: 2006-02-22
    Description: An in-flight wing wake section drag investigation was conducted using traversing pitot and static probes. The primary objective was to develop measurement techniques and improve the accuracy of in-flight wing profile drag measurements for low values of dynamic pressure and Reynolds number. Data were obtained on a sailplane for speeds from about 40 knots to 125 knots at chord Reynolds numbers between 1,000,000 and 3,000,000. Tests were conducted with zero flap deflection, deflected flaps, and various degrees of surface roughness, and for smooth and rough atmospheric conditions. Several techniques were used to increase data reliability and to minimize certain bias errors. A discussion of the effects of a total pressure probe in a pressure gradient, and the effects of discrete turbulence levels, on the data presented and other experimental results is also included.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Res. Center Advanced Technol. Airfoil Res., Vol. 1, Pt. 2; p 601-621
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 4
    facet.materialart.
    Unknown
    Some calculations of transonic potential flow for the NACA 64A006 airfoil with oscillating flap (1978)
    In:  CASI
    Details
    Publication Date: 2006-02-22
    Description: A method for calculating the transonic flow over steady and oscillating airfoils was developed by Isogai. It solves the full potential equation with a semi-implicit, time-marching, finite difference technique. Steady flow solutions are obtained from time asymptotic solutions for a steady airfoil. Corresponding oscillatory solutions are obtained by initiating an oscillation and marching in time for several cycles until a converged periodic solution is achieved. In this paper the method is described in general terms, and results are compared with experimental data for both steady flow and for oscillations at several values of reduced frequency. Good agreement for static pressures is shown for subcritical speeds, with increasing deviation as Mach number is increased into the supercritical speed range. Fair agreement with experiment was obtained at high reduced frequencies with larger deviations at low reduced frequencies.
    Keywords: AERODYNAMICS
    Type: Advanced Technol. Airfoil Res., Vol. 1, Pt. 2; p 689-700
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 5
    facet.materialart.
    Unknown
    Applications of dynamic measurement techniques to wind-tunnel testing (1978)
    In:  CASI
    Details
    Publication Date: 2006-02-22
    Description: The uses of laser Doppler velocimeter, hot wire, and surface hot film techniques in the study of turbulent flows are described, and data obtained in compressible flows are discussed. Applications are illustrated with measurements of wind tunnel freestream turbulence characteristics and with data obtained in transitional, turbulent, and separated shear flows. A new method which was developed for the study of time dependent and unsteady turbulent flows is also presented.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Res. Center Advanced Technol. Airfoil Res., Vol. 1, Pt. 2; p 571-588
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 6
    facet.materialart.
    Unknown
    Executive summary of Aircraft Icing Specialists Workshop (1979)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: In a period of escalating development costs for new aircraft, there is growing interest in a renewed and coordinated icing research effort to achieve an updating or modernization of each aspect of the technological issues that are involved. This includes the data base, analysis methods, test techniques, and test facilities.
    Keywords: AERODYNAMICS
    Type: Aircraft Icing; p 1-16
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 7
    facet.materialart.
    Unknown
    Safety hazard of aircraft icing (1979)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: The problem of aircraft icing is reported as well as the type of aircraft affected, the pilots involved, and an identification of the areas where reduction in icing accidents are readily accomplished.
    Keywords: AERODYNAMICS
    Type: NASA. Lewis Res. Center Aircraft Icing; p 21-27
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 8
    facet.materialart.
    Unknown
    Civil Helicopter icing problems (1979)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: The ice capabilities of rotary wing aircraft are examined. Recommendations are given to improve the inadequacies of the weather forecasts pertaining to ice, and to adopt a low maintenance anti-ice system.
    Keywords: AERODYNAMICS
    Type: NASA. Lewis Res. Center Aircraft Icing; p 29-30
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 9
    facet.materialart.
    Unknown
    Overview of helicopter ice protection system developments (1979)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: Helicopter ice protection design criteria was developed and technological shortcoming in meeting helicopter mission requirements is that of helicopter rotor blade ice protection. Airframe components are protected using existing technology while the rotor blade protected using the cyclic electrothermal deicing concept.
    Keywords: AERODYNAMICS
    Type: NASA. Lewis Res. Center Aircraft Icing; p 39-65
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 10
    facet.materialart.
    Unknown
    A review of the icing situation from the standpoint of general aviation (1979)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: An overview of the present situation in the field of aircraft icing with respect to certification and operation of nontransport category airplanes is given. Problems of definition and inconsistencies are pointed out. Problems in the forecasting and measurement of icing intensities are discussed. The present regulatory environment is examined with respect to its applicability and appropriateness to nontransport airplanes.
    Keywords: AERODYNAMICS
    Type: NASA. Lewis Res. Center Aircraft Icing; p 31-38
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 11
    facet.materialart.
    Unknown
    Icing of aircraft Some remarks with an historical slant from a cloud physicist (1979)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: Three areas of interest are commented on: cloud physics, nowcasting, and instrumentation. A comparison is made of what was done 30 years ago to what might be done in light of developments in related areas of cloud physics, weather modification and instrumentation.
    Keywords: AERODYNAMICS
    Type: NASA. Lewis Res. Center Aircraft Icing; p 17-19
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 12
    facet.materialart.
    Unknown
    Aerodynamic effects (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The tethered satellite concept provides an ideal platform for the study of the interaction of the atmosphere with satellites of various shapes and surfaces under a wide range of flow conditions. From experiments which would measure the drag, lift, and torque acting on the tethered satellite, important information could be obtained which would have application to satellite lifetime prediction, determination of properties of the upper atmosphere, and scientific information on the interaction of high speed molecules with surfaces (the gas surface interaction). These experiments using the tethered satellite concept are described and would measure the following variables: angle of attack, surface roughness, and flow properties.
    Keywords: AERODYNAMICS
    Type: UAH(NASA Workshop on the Use of a Tethered Satellite System; p 151-155
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 13
    facet.materialart.
    Unknown
    Prospects for computational aerodynamics (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The integral representations approach, for the solution of the Navier-Stokes equations is discussed as well as experience in its development and in applying available finite-difference and finite-element techniques to the treatment of three-dimensional problems, and the computation of turbulent flow. The magnitude of efforts required to develop turbulence models and three-dimensional algorithms indicates that the computational fluid dynamics research must have a broad base. Broader access to modern computing facilities that are in existence within NASA should be promoted for active researchers not directly affiliated with that agency.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Future Computer Requirements for Computational Aerodynamics; p 221-227
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 14
    facet.materialart.
    Unknown
    Modeling of the Reynolds stresses (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: In their most general form, the Reynolds averaged conservation equations result from ensemble or time averages of the instantaneous Navier-Stokes equations or their compressible counterparts. For these averaging processes to be consistent, the averaging time period must exceed the periods identified with the largest time scales of the turbulence, and yet be shorter than the characteristic times of the flow field. With these equations long period variations in the flow fields are deterministic, provided initial conditions are known. The average dependent variables are sufficiently smooth to be resolvable by finite difference techniques consistent with the size and speed of modern computers.
    Keywords: AERODYNAMICS
    Type: Future Computer Requirements for Computational Aerodynamics; p 239-247
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 15
    facet.materialart.
    Unknown
    Computational aerodynamics and the numerical aerodynamic simulation facility (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Technical and economic reasons for accelerating the maturation of the discipline of computational aerodynamics include the cost of conducting the experiments required to provide the empirical data base for new aeronautical vehicles and the limitations in test facilities (Reynolds number, wall and support interferences, aeroelastic distortions, real-gas effects, etc.) for simulating the full-scale vehicle environment. General purpose computers do not have the necessary capability for the next stage of development. Solution of the three dimensional Reynolds averaged Naiver-Stokes equations in a short time to be practical for design purposes will require 40 times the power of current supercomputers. However, it is feasible to construct a special purpose processor that will meet these requirements to enhance the nation's aerodynamic design capability in the 1980's.
    Keywords: AERODYNAMICS
    Type: Future Computer Requirements for Computational Aerodynamics; p 5-30
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 16
    facet.materialart.
    Unknown
    Carbon vaporization into a nonequilibrium, stagnation-point boundary layer (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The heat transfer to the stagnation point of an ablating carbonaceous heat shield, where both the gas-phase boundary layer and the heterogeneous surface reactions are not in chemical equilibrium, is examined. Specifically, the nonequilibrium changes in the mass fraction profiles of carbon species calculated for frozen flow are studied. A set of equations describing the steady-state, nonequilibrium laminar boundary layer in the axisymmetric stagnation region, over an ablating graphite surface, is solved, with allowance for the effects of finite rate of carbon vaporization.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 16; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 17
    facet.materialart.
    Unknown
    Perturbations in two- and three-dimensional transonic flows (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The difficulty of treating the perturbation of transonic flow, during which shock waves change position, can be overcome by using a distorted coordinate system in which the locations of all shock waves do not change; the distortion is found as part of the solution. This device leads to a relation that allows a range of flows, with differing shock locations, to be related algebraically to two known 'calibration' flows. Results for flows around finite wings, including those with multiple, intersecting shock waves, are presented. A typical computing time for such examples is 0.3 sec on a CDC 7600 computer.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 16; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 18
    facet.materialart.
    Unknown
    Numerical solution for supersonic flow near the trailing edge of a flat plate (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: In the present study, problems of laminar and turbulent two-dimensional flow of a viscous compressible fluid near the trailing edge of a thin flat plate are considered. The complete set of Navier-Stokes equations is solved by the finite-difference method of MacCormack (MacCormack and Baldwin, 1975). It is an explicit, predictor-corrector, time-splitting method of second order acuracy. The computational mesh employed has sufficient resolution for all the characteristic lengths suggested by theory. In the laminar case, the present results are compared with the triple deck solution of Daniels (1974). This comparison indicates that the asymptotic triple deck theory for supersonic trailing edge flow is accurate within five percent for Reynolds numbers greater than 1000. In the turbulent case, the Prandtl-Van Driest-Clauser algebraic eddy viscosity model is used. The numerical results show that the region of upstream influence is approximately of the order of the boundary layer thickness. The solutions for skin-friction, pressure and wake center-line velocity are presented.
    Keywords: AERODYNAMICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 19
    facet.materialart.
    Unknown
    Numerical solution for perpendicular sonic hydrogen injection into a ducted supersonic airstream (1979)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: This note discusses a computer program being developed to study the flow field near opposing perpendicular fuel injectors in scramjets. The MacCormack time-split, finite difference relaxation technique was used to solve the full two-dimensional compressible Navier-Stokes equations along with energy and species equations. By using this technique, a program was developed to consider the turbulent nonreacting flow of hydrogen and air in a rectangular duct. A damping term, proportional to the second derivative of pressure and temperature, was used to produce a stable solution behind the hydrogen jet in the neighborhood of the recompression shock. A case using actual conditions encountered in current scramjet design was analyzed, with results agreeing qualitatively with experimental observations.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 17; May 1979
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 20
    facet.materialart.
    Unknown
    Unsteady vortical and entropic distortions of potential flows round arbitrary obstacles (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The analysis concerns the alterations produced when small amplitude disturbances, including entropy and vorticity disturbances, are imposed on steady potential flows. For the most general nonacoustic incident distortion field that can be imposed on the uniform upstream flow, it is shown that the perturbation velocity at any point of the resulting unsteady compressible and vortical flow consists of a part that is a known function of the imposed upstream distortion field and the mean flow variables and a potential part that can be found by solving a linear inhomogeneous wave equation with a dipole-type source term whose strength is a known function of the imposed upstream distortion field. The theory is applied to the unsteady flow past a corner, and a closed-form analytical solution is found.
    Keywords: AERODYNAMICS
    Type: Journal of Fluid Mechanics; 89; Dec. 13
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 21
    facet.materialart.
    Unknown
    Generalized velocities in the outer region of hypersonic turbulent boundary layers (1979)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: An attempt is made to show that the outer portion of the velocity profile of hypersonic turbulent boundary layers can be transformed so that the constants determined by a best fit to the law of the wake are in reasonable agreement with the wake constant for incompressible boundary layers at the same Reynolds number. Both y transformations (where y is distance from the surface) and velocity transformations produce velocity profiles which, with the proper choice of wall shear stress to give shear velocity, can be reduced to the incompressible law of the wall.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 17; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 22
    facet.materialart.
    Unknown
    Accurate numerical evaluation of modified Struve functions occurring in unsteady aerodynamics (1979)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A method is developed for computing the modified Struve functions that occur in unsteady aerodynamics. The method uses a rational approximation supplemented by an asymptotic series for large argument. Simple recursive formulas for generating the coefficients are derived. The method is capable of generating results of arbitrary accuracy. It can also be used for complex argument and order. For greater computing speed, a method is presented that uses the rational and asymptotic approximations to generate Chebyshev coefficients.
    Keywords: AERODYNAMICS
    Type: Journal of Aircraft; 16; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 23
    facet.materialart.
    Unknown
    Reynolds number influence on leeside flowfields (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Experimental results on the Reynolds number influence on the leeside flowfield of planar delta wings at supersonic speeds are presented. Wind tunnel experiments on two delta wing models with straight and sharp leading edges at freestream Mach number of 2.5 and 3.5 and angle of attack between 1 deg and 12.5 deg were carried out. The cross-sectional shape was triangular and the relative height was 0.25. The flow types investigated were to the left and right of the Stanbrook-Squire boundary. Under leading-edge separation conditions, the vortex position and intensity, and thus the suction pressure, vary with Re while the flow type remains nearly unchanged. In the region of separation with embedded shock, Re affects not only the shape of the separation bubble and pressure level near the leading edge but also the type of flow. At sufficiently high Re the flow type of separation with shock changes to one with shock-induced separation.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 16; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 24
    facet.materialart.
    Unknown
    Unsteady flow in a supersonic cascade with subsonic leading-edge locus (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Linearized theory is used to predict the unsteady flow in a supersonic cascade with subsonic axial flow velocity. A closed-form analytical solution is obtained by using a double application of the Wiener-Hopf technique. Although numerical and semianalytical solutions of this problem have already appeared in the literature, this paper contains the first completely analytical solution. It has been stated in the literature that the blade source should vanish at the infinite duct resonance condition. The present analysis shows that this does not occur. This apparent discrepancy is explained in the paper.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 16; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 25
    facet.materialart.
    Unknown
    Inlet boundary-layer shapes on four aircraft forebodies at Mach 6 (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Boundary-layer shape measurements at the engine inlet on four different hypersonic aircraft forebody designs (with no engine on the forebody) are reported. The measurements provide a qualitative assessment of the effectiveness of various forebody geometries as engine inlet precompression surfaces. The designs, tested in a hypersonic tunnel at Mach 6 and a nominal freestream Reynolds number of 30,500,000, included a semiconical forebody, a configuration similar to a slab delta wing, a conical nose blended into a flat surface, and a conical, complex forebody shape. Boundary layer height as a function of forebody compression is shown for each design.
    Keywords: AERODYNAMICS
    Type: Journal of Aircraft; 15; Jan. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 26
    facet.materialart.
    Unknown
    Notes on the transonic indicial method (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The indicial method for calculating flutter derivatives for two-dimensional airfoils at transonic speeds is discussed, with particular attention given to the effect of a moving shock on the flow variables in the indicial method. An expression for the pressure coefficient is developed on the basis of an explicit treatment of the shock motion; the pressure distribution may then be calculated for general oscillations through use of the indicial method. Explicit inclusion of the shock motion is not necessary if only the lift and pitching moment coefficients are desired.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 16; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 27
    facet.materialart.
    Unknown
    Laminar and turbulent flows over a spherically blunted cone with massive surface blowing (1979)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Numerical solutions are presented for the flow over a spherically blunted cone with massive surface blowing. Time-dependent viscous shock layer equations are used to describe the flowfield. The boundary conditions on the body surface include a prescribed blowing rate distribution. The governing equations are solved by a time-asymptotic finite-difference method. Results presented here are only for a perfect gas-type flow at zero angle of attack. Both laminar and turbulent flow solutions are obtained. It is found that the surface blowing smooths out the effect of the curvature discontinuity at the sphere-cone juncture point on the laminar flowfield and results in a negative pressure gradient over the body. The shock slope increases on the downstream portion of the body as the surface blowing rate is increased. The turbulent flow with surface blowing is found to redevelop a boundary-layer-like region near the surface. The effects of this boundary-layer-like region on the flowfield and heating rates are discussed.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 17; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 28
    facet.materialart.
    Unknown
    Fast, conservative schemes for the full potential equation applied to transonic flows (1979)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Implicit approximate factorization techniques (AF) are investigated for the solution of matrix equations resulting from finite-difference approximations to the full potential equation in conservation form. For transonic flows, an artificial viscosity, required to maintain stability in supersonic regions, is introduced by an upwind bias of the density. Two implicit AF procedures are presented, and their convergence performance is compared with that of the standard transonic solution procedure: successive line overrelaxation (SLOR). Subcritical and supercritical test cases are considered. Results indicate a substantial improvement in convergence rate for AF schemes relative to SLOR.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 17; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 29
    facet.materialart.
    Unknown
    Criteria for asymptotic supersonic two-dimensional turbulent wakes (1979)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Indicators used to determine the fully developed mean flow for two dimensional turbulent supersonic wakes are examined. The similarity variables for velocity temperature and the transverse coordinate used by Demetriades (1969) and Wagner (1972) are shown not to adequately distinguish transition from developed turbulent flows. The growth rate of the two dimensional turbulent wake as the wake develops from laminar to turbulent are shown to be low in the laminar region, increase at transition, and level off as fully developed turbulence is attained, demonstrating that wake growth rates are better indicators of a fully developed mean flow than are similarity variables.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 17; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 30
    facet.materialart.
    Unknown
    Quasi-periodic structure of a turbulent jet (1979)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The instantaneous near field pressure fluctuations of an axisymmetric subsonic jet were measured by using a longitudinal and an azimuthal microphone arrays in order to qualitatively determine the behaviors of the quasi-periodic structure within the flow. Statistical analysis is used to explain the characteristic of the pressure signals. In addition to the information obtained by forming the power spectral density, auto- and cross-correlation functions, two types of signals are extracted through a conditional probability analysis to represent the quasi-periodic and the random fine structures within the turbulent jet. The quasi-periodic structure first appears as a rolling up of the mixing layer flow within one nozzle diameter downstream of the exit, then becomes fully developed at approximately 3 nozzle diameters downstream with a preferred Strouhal number range 0.3-0.4, and finally disappears beyond the end of potential core. This behavior is also reflected in the variation of the convection velocity.
    Keywords: AERODYNAMICS
    Type: Journal of Sound and Vibration; 64; May 8
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 31
    facet.materialart.
    Unknown
    Reynolds number effects on the turbulence field in compressible boundary layers (1979)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Detailed experiments were conducted in a zero pressure gradient, supersonic turbulent boundary layer, including measurements of the three components of velocity fluctuations and the turbulent shear stress, for Reynolds numbers ranging from 11.7 million to 105 million at a freestream Mach number of 2.3. The mean flow measurements established the fully developed and equilibrium nature of the boundary layer. Measurements of the turbulence field show that the vertical and transverse fluctuations are essentially equal throughout the boundary layer at all Reynolds numbers, a feature that is different from observations in incompressible flows. The data show that the boundary layer exhibits similarity in the turbulence profiles for the entire Reynolds number range and agrees with previous compressible and incompressible data using Morkovin's scaling to account for compressibility effects.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 17; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 32
    facet.materialart.
    Unknown
    Summary of system state-of-health measurements STRATCOM 8: A balloon experiment (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Various measurements were made to determine the temperature and attitude of the gondola and the status of primary power and control equipment. Bead thermistors were used to measure temperatures at selected points throughout the gondola. A two-axis magnetometer and a two-axis pendulum were used to measure gondola attitude. Voltage and current measurements indicated the status of the primary power sources and associated power converters.
    Keywords: AERODYNAMICS
    Type: NASA. Goddard Space Flight Center STRATCOM 8 Data Workshop and Suppl.; p 24-31
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 33
    facet.materialart.
    Unknown
    Stratospheric composition balloon, aircraft and rocket-borne experiments, 28-30 September 1977 (systems, instruments, trajectories, supporting measurements) (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The STRATCOM (STRATospheric COMposition) is a long term multipurpose program for integrated, correlated measurements of stratospheric parameters related to composition, thermodynamics, and radiative balance. Balloon 8-b, carrying a solar-pointing grating infrared spectrometer, two CO2 thermal emission radiometers and two in-situ air temperature sensors was launched at 1251 MST on 28 September 1977 to float at an altitude of 39 km from 1521 MST with the instruments making measurements at that altitude through the time of sunset at 1822 MST. Balloon 8-a lifted a payload consisting of four UV filter photometers, two UV spectrometers, two chemiluminescent ozonesondes, dasibi ozone monitor, 14 tube cryogenic sampler, two aluminum oxide H2O sensors, four air temperature sensors, atmospheric pressure sensor, infrared and visible pyranometers, downward-looking camera, blunt-kryton lamp-Gerdien condenser probe, three component anemometer, balloon apex-plate payload and three parachute-borne dropsondes.
    Keywords: AERODYNAMICS
    Type: NASA. Goddard Space Flight Center STRATCOM 8 Data Workshop and Suppl.; p 10-23
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 34
    facet.materialart.
    Unknown
    Some steady and oscillating airfoil test results, including the effects of sweep, from the tunnel spanning wing (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A large scale tunnel spanning wing was built and tested. The model can be operated as either a swept or unswept wing and can be tested in steady state or oscillated sinusoidally in pitch about its quarter chord. Data is taken at mid-span with an internal 6-component balance and is also obtained from miniature pressure transducers distributed near the center span region. A description is given of the system and a brief discussion of some of the steady and unsteady results obtained to date. These are the steady load behavior to Mach numbers of approximately 1.1 and unsteady loads, including drag, at a reduced frequency of approximately 0.1.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Res. Center Advanced Technol. Airfoil Res., Vol. 1, Pt. 1; p 445-458
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 35
    facet.materialart.
    Unknown
    A new airfoil research capability (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The design and construction of a self streamlining wall test section for the Langley 0.3 meter transonic cryogenic tunnel was included in the fiscal year 1978 construction of facilities budget for Langley Research Center. The design is based on the research being carried out by M. J. Goodyer at the University of Southampton, Southampton, England, and is supported by Langley Research Center. This paper presents a brief description of the project. Included are some of the design considerations, anticipated operational envelope, and sketches showing the detail design concepts. Some details of the proposed operational mode, safety aspects, and preliminary schedule are presented.
    Keywords: AERODYNAMICS
    Type: Advanced Technol. Airfoil Res., Vol. 1, Pt. 1; p 425-432
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 36
    facet.materialart.
    Unknown
    Design and calibration of slotted walls for transonic airfoil wind tunnels (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The traditional procedure for estimating the performance of slotted walls for airfoil wind tunnels is reviewed, and a modification which improves the accuracy of this procedure is described. Unlike the traditional procedure, the modified procedure indicates that the design of airfoil wind-tunnel walls which induce minimal blockage and streamline-curvature effects is feasible. The design and testing of such a slotted wall is described. It is shown experimentally that the presence of a model can affect the plenum pressure and thus make the use of the plenum pressure as a calibration reference questionable. Finally, an ONERA experiment which shows the effect of the sidewall boundary layer on the measured model normal force is discussed.
    Keywords: AERODYNAMICS
    Type: Advanced Technol. Airfoil Res., Vol. 1, Pt. 1; p 433-443
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 37
    facet.materialart.
    Unknown
    Inverse boundary-layer technique for airfoil design (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A description is presented of a technique for the optimization of airfoil pressure distributions using an interactive inverse boundary-layer program. This program allows the user to determine quickly a near-optimum subsonic pressure distribution which meets his requirements for lift, drag, and pitching moment at the desired flow conditions. The method employs an inverse turbulent boundary-layer scheme for definition of the turbulent recovery portion of the pressure distribution. Two levels of pressure-distribution architecture are used - a simple roof top for preliminary studies and a more complex four-region architecture for a more refined design. A technique is employed to avoid the specification of pressure distributions which result in unrealistic airfoils, that is, those with negative thickness. The program allows rapid evaluation of a designed pressure distribution off-design in Reynolds number, transition location, and angle of attack, and will compute an airfoil contour for the designed pressure distribution using linear theory.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Res. Center Advanced Technol. Airfoil Res., Vol. 1, Pt. 1; p 383-397
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 38
    facet.materialart.
    Unknown
    Langley's two-dimensional research facilities: Capabilities and plans (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The current capabilities and the forthcoming plans for Langley's two-dimensional research facilities are described. The characteristics of the Langley facilities are discussed in terms of Reynolds number, Mach number, and angle-of-attack capabilities. Comments are made with regard to the approaches which have been investigated to alleviate typical problem areas such as wall boundary effects. Because of the need for increased Reynolds number capability at high subsonic speeds, a considerable portion of the paper deals with a description of the 20 by 60 cm two-dimensional test section of the Langley 0.3 meter transonic cryogenic tunnel which is currently in the calibration and shakedown phase.
    Keywords: AERODYNAMICS
    Type: Advanced Technol. Airfoil Res., Vol. 1, Pt. 1; p 399-414
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 39
    facet.materialart.
    Unknown
    The prediction of two-dimensional airfoil stall progression (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A generalized boundary condition potential flow calculation method was combined with a momentum integral boundary layer method and a base flow theory of separation to predict airfoil viscous-inviscid interference up to and beyond stall. The resultant program considers laminar and turbulent separation and is, therefore, applicable to thin or thick airfoil stall. The calculated flow field includes the airfoil and the separation bubble recombination region behind the airfoil. Calculated pressure distributions and equivalent airfoil shapes, including the displacement thickness of the viscous regions, are compared with flow field measurements for several airfoils. The measured displacement thicknesses and wake centerlines corroborate the calculated shape. The comparison also suggests the use of the analytical solution to evaluate the measurements.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Res. Center Advanced Technol. Airfoil Res., Vol. 1, Pt. 1; p 335-345
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 40
    facet.materialart.
    Unknown
    Application of numerical optimization to the design of advanced supercritical airfoils (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: An application of numerical optimization to the design of advanced airfoils for transonic aircraft showed that low-drag sections can be developed for a given design Mach number without an accompanying drag increase at lower Mach numbers. This is achieved by imposing a constraint on the drag coefficient at an off-design Mach number while minimizing the drag coefficient at the design Mach number. This multiple design-point numerical optimization has been implemented with the use of airfoil shape functions which permit a wide range of attainable profiles during the optimization process. Analytical data for the starting airfoil shape, a single design-point optimized shape, and a double design-point optimized shape are presented. Experimental data obtained in the NASA Ames two-by two-foot wind tunnel are also presented and discussed.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Res. Center Advanced Technol. Airfoil Res., Vol. 1, Pt. 1; p 315-325
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 41
    facet.materialart.
    Unknown
    Improved prediction of laminar leading edge separation (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Research was conducted to provide a definite criterion for the prediction of the bubble burst on airfoils typical of those used for fighter wings. The approach taken was to correlate existing airfoil bubble burst data using various parameters at the laminar separation point. The method due to Weber was modified to provide a continuous analytic solution for the velocity distribution around the airfoil leading edge. Coupling the modified Weber method with the Stratford laminar separation prediction method leads to a universal chart giving the conditions at separation as a function of stagnation location and leading edge radius. Application of the combined method to available two-dimensional airfoil data resulted in an empirical criterion presenting the limiting local velocity gradient at separation as a function of the boundary layer momentum thickness at separation for bubble burst. The correlation leads as well to the qualitative explanation of two types of laminar stall: thin airfoil and leading edge. The validity of the correlation is demonstrated by predicting the lift coefficient and angle of attack for stall on airfoils with leading edge or trailing edge flaps.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Res. Center Advanced Technol. Airfoil Res., Vol. 1, Pt. 1; p 327-334
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 42
    facet.materialart.
    Unknown
    Optimization of multi-element airfoils for maximum lift (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Two theoretical methods are presented for optimizing multi-element airfoils to obtain maximum lift. The analyses assume that the shapes of the various high lift elements are fixed. The objective of the design procedures is then to determine the optimum location and/or deflection of the leading and trailing edge devices. The first analysis determines the optimum horizontal and vertical location and the deflection of a leading edge slat. The structure of the flow field is calculated by iteratively coupling potential flow and boundary layer analysis. This design procedure does not require that flow separation effects be modeled. The second analysis determines the slat and flap deflection required to maximize the lift of a three element airfoil. This approach requires that the effects of flow separation from one or more of the airfoil elements be taken into account. The theoretical results are in good agreement with results of a wind tunnel test used to corroborate the predicted optimum slat and flap positions.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Res. Center Advanced Technol. Airfoil Res., Vol. 1, Pt.1; p 237-253
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 43
    facet.materialart.
    Unknown
    Improvements in surface singularity analysis and design methods (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The coupling of the combined source vortex distribution of Green's potential flow function with contemporary numerical techniques is shown to provide accurate, efficient, and stable solutions to subsonic inviscid analysis and design problems for multi-element airfoils. The analysis problem is solved by direct calculation of the surface singularity distribution required to satisfy the flow tangency boundary condition. The design or inverse problem is solved by an iteration process. In this process, the geometry and the associated pressure distribution are iterated until the pressure distribution most nearly corresponding to the prescribed design distribution is obtained. Typically, five iteration cycles are required for convergence. A description of the analysis and design method is presented, along with supporting examples.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Res. Center Advanced Technol. Airfoil Res., Vol. 1, Pt. 1; p 221-236
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 44
    facet.materialart.
    Unknown
    Prospects for computing airfoil aerodynamics with Reynolds averaged Navier-Stokes codes (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The Reynolds averaged Navier-Stokes equations are solved numerically for a variety of transonic airfoil configurations where viscous phenomena are important. Illustrative examples include flows past sensitive geometries, Reynolds number effects, and buffet phenomena.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Res. Center Advanced Technol. Airfoil Res., Vol. 1, Pt. 1; p 119-131
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 45
    facet.materialart.
    Unknown
    Overview of two-dimensional airfoil research at Ames Research Center (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The five basic elements of the two dimensional airfoil research program at Ames Research Center are illustrated. These elements are experimental, theoretical (including computational), validation, design optimization, and industry interaction. Each area is briefly discussed.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Res. Center Advanced Technol. Airfoil Res., Vol. 1, Pt. 1; p 39-44
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 46
    facet.materialart.
    Unknown
    Low speed airfoil design and analysis (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A low speed airfoil design and analysis program was developed which contains several unique features. In the design mode, the velocity distribution is not specified for one but many different angles of attack. Several iteration options are included which allow the trailing edge angle to be specified while other parameters are iterated. For airfoil analysis, a panel method is available which uses third-order panels having parabolic vorticity distributions. The flow condition is satisfied at the end points of the panels. Both sharp and blunt trailing edges can be analyzed. The integral boundary layer method with its laminar separation bubble analog, empirical transition criterion, and precise turbulent boundary layer equations compares very favorably with other methods, both integral and finite difference. Comparisons with experiment for several airfoils over a very wide Reynolds number range are discussed. Applications to high lift airfoil design are also demonstrated.
    Keywords: AERODYNAMICS
    Type: Advanced Technol. Airfoil Res., Vol. 1, Pt. 1; p 73-100
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 47
    facet.materialart.
    Unknown
    Langley airfoil-research program (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: An overview of past, present, and future airfoil research activities at the Langley Research Center is given. The immediate past and future occupy most of the discussion; however, past accomplishments and milestones going back to the early NACA years are dealt with in a broad-brush way to give a better perspective of current developments and programs. In addition to the historical perspective, a short description of the facilities which are now being used in the airfoil program is given. This is followed by a discussion of airfoil developments, advances in airfoil design and analysis tools (mostly those that have taken place over the past 5 or 6 years), and tunnel-wall-interference predictive methods and measurements. Future research requirements are treated.
    Keywords: AERODYNAMICS
    Type: Advanced Technol. Airfoil Res., Vol. 1, Pt. 1; p 11-38
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 48
    facet.materialart.
    Unknown
    In-flight Compressible Turbulent Boundary Layer Measurements on a Hollow Cylinder at a Mach Number of 3.0 (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Skin temperatures, shearing forces, surface static pressures, and boundary layer pitot pressures and total temperatures were measured on a hollow cylinder 3.04 meters long and 0.437 meter in diameter mounted beneath the fuselage of the YF-12A airplane. The data were obtained at a nominal free stream Mach number of 3.0 and at wall-to-recovery temperature ratios of 0.66 to 0.91. The free stream Reynolds number had a minimal value of 4.2 million per meter. Heat transfer coefficients and skin friction coefficients were derived from skin temperature time histories and shear force measurements, respectively. Boundary layer velocity profiles were derived from pitot pressure measurements, and a Reynolds analogy factor of 1.11 was obtained from the measured heat transfer and skin friction data. The skin friction coefficients predicted by the theory of van Driest were in excellent agreement with the measurements. Theoretical heat transfer coefficients, in the form of Stanton numbers calculated by using a modified Reynolds analogy between skin friction and heat transfer, were compared with measured values. The measured velocity profiles were compared to Coles' incompressible law-of-the-wall profile.
    Keywords: AERODYNAMICS
    Type: YF-12 Experiments Symp., Vol. 1; p 259-286
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 49
    facet.materialart.
    Unknown
    Boundary layer, skin friction, and boattail pressure measurements from the YF-12 airplane at Mach numbers up to 3 (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: In-flight measurements of boundary layer and skin friction data were made on YF-12 airplanes for Mach numbers between 2.0 and 3.0. Boattail pressures were also obtained for Mach numbers between 0.7 and 3.0 with Reynolds numbers up to four hundred million. Boundary layer data measured along the lower fuselage centerline indicate local displacement and momentum thicknesses can be much larger than predicted. Skin friction coefficients measured at two of five lower fuselage stations were significantly less than predicted by flat plate theory. The presence of large differences between measured boattail pressure drag and values calculated by a potential flow solution indicates the presence of vortex effects on the upper boattail surface. At both subsonic and supersonic speeds, pressure drag on the longer of two boattail configurations was equal to or less than the pressure drag on the shorter configuration. At subsonic and transonic speeds, the difference in the drag coefficient was on the order of 0.0008 to 0.0010. In the supersonic cruise range, the difference in the drag coefficient was on the order of 0.002. Boattail drag coefficients are based on wing reference area.
    Keywords: AERODYNAMICS
    Type: YF-12 Experiments Symp., Vol. 1; p 227-258
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 50
    facet.materialart.
    Unknown
    Flight-measured pressure characteristics of aft-facing steps in thick boundary layer flow for transonic and supersonic Mach numbers (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Aft-facing step base pressure flight data were obtained for three step heights for nominal transonic Mach numbers of 0.80, 0.90, and 0.95, and for supersonic Mach numbers of 2.2, 2.5, and 2.8 with a Reynolds number, based on the fuselage length ahead of the step, of about 10 to the 8th power. Surface static pressures were measured ahead of the step, behind the step, and on the step face (base), and a boundary layer rake was used to obtain boundary layer reference conditions. A comparison of the data from the present and previous experiments shows the same trend of increasing base pressure ratio (decreasing drag) with increasing values of momentum thickness to step height ratios. However, the absolute level of these data does not always agree at the supersonic Mach numbers. For momentum thickness to height ratios near 1.0, the differences in the base pressure ratios appear to be primarily a function of Reynolds number based on the momentum thickness. Thus, for Mach numbers above 2, the data analyzed show that the base pressure ratio decreases (drag increases) as Reynolds number based on momentum thickness increases for a given momentum thickness and step height.
    Keywords: AERODYNAMICS
    Type: YF-12 Experiments Symp., Vol. 1; p 201-226
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 51
    facet.materialart.
    Unknown
    Wind tunnel evaluation of YF-12 inlet response to internal airflow disturbances with and without control (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The response of terminal-shock position and static pressures in the subsonic duct of a YF-12 aircraft flight-hardware inlet to perturbations in simulated engine corrected airflow were obtained with and without inlet control. Frequency response data, obtained with inlet controls inactive, indicated the general nature of the inherent inlet dynamics, assisted in the design of controls, and provided a baseline reference for responses with active controls. All the control laws were implemented by means of a digital computer that could be programmed to behave like the flight inlet's existing analog control. The experimental controls were designed using an analytical optimization technique. The capabilities of the controls were limited primarily by the actuation hardware. The experimental controls provided somewhat better attenuation of terminal shock excursions than did the YF-13 inlet control. Controls using both the forward and aft bypass systems also provided somewhat better attenuation than those using just the forward bypass. The main advantage of using both bypasses is in the greater control flexibility that is achieved.
    Keywords: AERODYNAMICS
    Type: NASA. Dryden Flight Res. Center YF-12 Experiments Symp., Vol. 1; p 157-192
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 52
    facet.materialart.
    Unknown
    Pilot Workload Measurement and Experience on Supersonic Cruise Aircraft (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Aircraft parameters and physiological parameters most indicative of crew workload were investigated. Recommendations were used to form the basis for a continuing study in which variations of the interval between heart beats are used as a measure of nonphysical workload. Preliminary results are presented and current efforts in further defining this physiological measure are outlined.
    Keywords: AERODYNAMICS
    Type: YF-12 Experiments Symp., Vol. 1; p 121-134
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 53
    facet.materialart.
    Unknown
    The YF-12 Gust Velocity Measuring System (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A true gust velocity measuring system designed to alleviate complications resulting from airframe flexibility and from the high-speed, high-temperature environment of supersonic cruise aircraft was evaluated on a YF-12 airplane. The system uses fixed vanes on which airflow direction changes produce differential pressure variations that are measured. Airframe motions, obtained by postflight integration of recorded angular rate and linear acceleration data, are removed from the flow angle data. An example of turbulence data obtained at high-altitude, supersonic flight conditions is presented and compared with previous high-altitude turbulence measurements obtained with subsonic aircraft and with turbulence criteria contained in both military and civil design specifications for supersonic cruise vehicles. Results of these comparisons indicate that the YF-12 turbulence sample is representative of turbulence present in the supersonic cruise environment.
    Keywords: AERODYNAMICS
    Type: YF-12 Experiments Symp., Vol. 1; p 135-154
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 54
    facet.materialart.
    Unknown
    Flight experience with altitude hold and Mach hold autopilots on the YF-12 aircraft at Mach 3 (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The altitude hold mode of the YF-12A airplane was modified to include a high-pass-filtered pitch rate feedback along with optimized inner loop altitude rate proportional and integral gains. An autothrottle control system was also developed to control either Mach number or KEAS at the high-speed flight conditions. Flight tests indicate that, with the modified system, significant improvements are obtained in both altitude and speed control, and the combination of altitude and autothrottle hold modes provides the most stable aircraft platform thus far demonstrated at Mach 3 conditions.
    Keywords: AERODYNAMICS
    Type: YF-12 Experiments Symp., Vol. 1; p 97-119
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 55
    facet.materialart.
    Unknown
    Flight-Measured Aerodynamic Loads on a 0.92 Aspect Ratio Lifting Surface (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Ventral fin loads, expressed as normal force coefficients, bending moment coefficients, and torque coefficients, were measured during flight tests of a YF-12A airplane. Because of the proximity of the ventral fin to the ailerons, the aerodynamic loads presented were the result of both sideslip loads and aileron crossflow loads. Aerodynamic data obtained from strain gage loads instrumentation and some flight pressure measurements are presented for several Mach numbers ranging from 0.70 to 2.00. Selected wind tunnel data and results of linear theoretical aerodynamic calculations are presented for comparison.
    Keywords: AERODYNAMICS
    Type: YF-12 Experiments Symp., Vol. 1; p 73-91
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 56
    facet.materialart.
    Unknown
    Overview of the NASA YF-12 program (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The history of NASA's interest in supersonic research and the agency's contribution to the development of the YF 12 aircraft is reviewed as well as the program designed to use that aircraft as a test bed for supersonic cruise research. Topics cover elements of the program, project organization, and major accomplishments.
    Keywords: AERODYNAMICS
    Type: YF-12 Experiments Symp., Vol. 1; p 3-25
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 57
    facet.materialart.
    Unknown
    Recent Load Calibrations Experience with the YF-12 Airplane (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The use of calibrated strain gages to measure wing loads on the YF-12A airplane is discussed as well as structural configurations relative to the thermal environment and resulting thermal stresses. A thermal calibration of the YF-12A is described to illustrate how contaminating thermal effects can be removed from loads equations. The relationship between ground load calibrations and flight measurements is examined for possible errors, and an analytical approach to accommodate such errors is presented.
    Keywords: AERODYNAMICS
    Type: YF-12 Experiments Symp., Vol. 1; p 47-72
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 58
    facet.materialart.
    Unknown
    Wake vortex technology (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A brief overview of the highlights of NASA's wake vortex minimization program is presented. The significant results of this program are summarized as follows: (1) it is technically feasible to reduce significantly the rolling upset created on a trailing aircraft; (2) the basic principles or methods by which reduction in the vortex strength can be achieved have been identified; and (3) an analytical capability for investigating aircraft vortex wakes has been developed.
    Keywords: AERODYNAMICS
    Type: CTOL Transport Technol., 1978; p 757-771
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 59
    facet.materialart.
    Unknown
    Development of advanced stability theory suction prediction techniques for laminar flow control (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The problem of obtaining accurate estimates of suction requirements on swept laminar flow control wings was discussed. A fast accurate computer code developed to predict suction requirements by integrating disturbance amplification rates was described. Assumptions and approximations used in the present computer code are examined in light of flow conditions on the swept wing which may limit their validity.
    Keywords: AERODYNAMICS
    Type: CTOL Transport Technol. 1978; p 375-394
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 60
    facet.materialart.
    Unknown
    Laminar flow control overview (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Application of laminar flow control technology to future CTOL long range transport aircraft was considered. Topics covered include: (1) airfoil development and test; (2) development and improvement of design methods; (3) evaluation of leading edge contamination; and (4) laminar flow control system definition and concept evaluation.
    Keywords: AERODYNAMICS
    Type: CTOL Transport Technol., 1978; p 349-356
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 61
    facet.materialart.
    Unknown
    Prediction of aerodynamic characteristics for slender bodies alone and with lifting surfaces to high angles of attack (1979)
    In:  CASI
    Details
    Publication Date: 2017-10-02
    Description: A method is presented for computing normal force and pitching moment coefficients for slender bodies of circular and noncircular cross section alone and with lifting surfaces. A semiempirical term representing viscous-separation crossflow is added to a term representing potential-theory crossflow. For bodies of revolution, computed aerodynamic characteristics agree with measured results for investigated free-stream Mach numbers from 0.6 to 2.9 and for angles of attack from 0 deg to 180 deg. For bodies of elliptic cross section, measured results are predicted well over the investigated Mach number range from 0.6 to 2.0 and the angle range from 0 deg to 60 deg. For all bodies the predictions are best at supersonic Mach numbers. For body-wing and body-wing-tail configurations, measured normal force coefficients and centers are predicted at the upper test Mach number of 2.0. As the Mach number is decreased to 0.6, the agreement for the normal-force coefficients rapidly deteriorates. When model flow-separation and vortex patterns are asymmetric, undesirable side forces are usually measured on the models at subsonic Mach numbers and zero sideslip angle. Generally, the side-force coefficients decrease or vanish with: increase in Mach number, decrease in nose fineness ratio, nose blunting, and flattening of body cross section.
    Keywords: AERODYNAMICS
    Type: AGARD High Angle of Attack Aerodyn.; 40 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 62
    facet.materialart.
    Unknown
    Recent theoretical developments and experimental studies pertinent to vortex flow aerodynamics, with a view towards design (1979)
    In:  CASI
    Details
    Publication Date: 2017-10-02
    Description: Recent progress in a research program directed toward an improved vortex flow technology base was reviewed. Analysis methods for conical flow and analysis and design methods for nonconical flows are presented. Applications are made for a variety of planar, nonplanar, and interferring lifting surfaces. Several methods are shown to provide reasonable estimates of over-all forces and moments for simple wing planforms with the suction analogy method currently offering the most versatility for arbitrary configuration applications. For the prediction of surface loadings the free vortex sheet method being developed by Boeing is shown to have considerable promise and further development of this type of method is encouraged. A data base for ogee strake-wing configurations is summarized with an emphasis on the requirements for maximizing the interference lift. A strake planform design procedure is discussed and a first solution (gothic in planview) is integrated with a wing body. The data show the strake to exhibit expected stable vortex characteristics. It was found that, apart from increasing sweep, conically cambered delta wings developed drag levels approaching that of attached flow with increasing either the lift or the wing camber height, lastly, an approximate vortex flow design method, based on the suction analogy, is outlined and an example is given.
    Keywords: AERODYNAMICS
    Type: AGARD High Angle of Attack Aerodyn.; 31 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 63
    facet.materialart.
    Unknown
    The Mechanism of Fluid Resistance (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The mechanism of fluid resistance within the limit of the square law is presented. It was concluded that the investigations should be extended and completed in two directions, namely: by an investigation of stable vortex configurations in space, and by considering the perfect fluid as the limiting case of a viscous fluid and then limiting the law of vortex of formation with the condition that only those fluid particles which were in contact with the surface of the body can receive rotation.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Classical Aerodyn. Theory; p 57-66
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 64
    facet.materialart.
    Unknown
    Considerations of some critical ejector problems (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Some aspects of ejector design and application, including, three dimensional effects and cross flow effects are presented.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Workshop on Thrust Augmenting Ejectors; p 363-384
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 65
    facet.materialart.
    Unknown
    Large-scale turbulent structures in jets and in flows over cavities and their relationship to entrainment and mixing (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Large scale structures in jets and in flows over cavities were investigated experimentally to determine their role in entrainment, mixing, and noise production. The presence of these structures resulted in growth of the shear layer and entrainment. Merging of adjacent large scale structures caused the near field pressure signal in excited flows. It is believed that both the entrained fluid as well as its eventual mixing with the jet flow can be controlled by introducing pulsation in the jet flow at a frequency for which the flow is most unstable.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Workshop on Thrust Augmenting Ejectors; p 295-309
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 66
    facet.materialart.
    Unknown
    Recent developments in ejector technology in the Air Force: An overview (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Basic and applied studies in thrust augmentation conducted at the Aerospace Research Laboratory at Wright-Patterson AFB which led to an effective configuration of the jet flap diffuser ejector, are reviewed. A method for compressible ejector flow analysis, developed in support of the preliminary design of an ejector thrust aircraft, is discussed and applied to single- and two-stage ejectors.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Workshop on Thrust Augmenting Ejectors; p 1-22
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 67
    facet.materialart.
    Unknown
    A Comparison of the Aerodynamic Characteristics of Eight Sailwing Airfoil Sections (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The operational characteristics of sailwings are discussed with emphasis placed on the importance of the trailing edge cable tension. The three dimensional aerodynamic characteristics were obtained from wind tunnel tests, and the results compared to determine the magnitude of the aerodynamic penalties paid for various structural simplifications. For the sectional thickness ratios, it is concluded that, while the basic double-membraned sailwing has exceptional aerodynamic performance, even superior for some applications to the conventional hardwing, any notable deviation from this configuration results in an unacceptably large performance penalty.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Res. Center The Sci. and Technol. of Low Speed and Motorless Flight, Pt. 1; p 155-176
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 68
    facet.materialart.
    Unknown
    Low-speed single-element airfoil synthesis (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The use of recently developed airfoil analysis/design computational tools to clarify, enrich and extend the existing experimental data base on low-speed, single element airfoils is demonstrated. A discussion of the problem of tailoring an airfoil for a specific application at its appropriate Reynolds number is presented. This problem is approached by use of inverse (or synthesis) techniques, wherein a desirable set of boundary layer characteristics, performance objectives, and constraints are specified, which then leads to derivation of a corresponding viscous flow pressure distribution. Examples are presented which demonstrate the synthesis approach, following presentation of some historical information and background data which motivate the basic synthesis process.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Res. Center The Sci. and Technol. of Low Speed and Motorless Flight, Pt. 1; p 1-31
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 69
    facet.materialart.
    Unknown
    The external augmentor concept for V/STOL aircraft (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The beneficial aspects of an ejector powered V/STOL concept were reviewed. The feasibility of satisfactorily incorporating an ejector system in a high performance V/STOL aircraft was investigated. The external augmentor concept, based on the use of chordwise ejector slots, is presented. It is concluded that the external augmentor concept has a basic inherent simplicity and a sufficient augmentor performance potential to make feasible a high performance V/STOL aircraft based on ejectors.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Workshop on Thrust Augmenting Ejectors; p 449-471
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 70
    facet.materialart.
    Unknown
    Interface concerns of ejector integration in V/STOL aircraft (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A number of areas which have in the past contributed to weight, complexity, and thrust losses in the ejector-powered V/STOL vehicle were identified. Most of these interfaces taken singly do not represent a severe compromise to the vehicle; however, the bottom line is that the sum of compromises and the subsequent effects on performance, flight operations and maintenance have rendered the ejector V/STOL aircraft unattractive. In addition to some of the unique ejector/aircraft integration problems, the vehicle by virtue of having a V/STOL capability, is compromised in other areas. To be successful and acceptable, the advantages must outweight the disadvantages and simplicity with minimum penalties must be the rule. It is concluded that more emphasis must be placed on the ejector/aircraft interface for the concept to be successful.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Workshop on Thrust Augmenting Ejectors; p 397-415
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 71
    facet.materialart.
    Unknown
    Entrainment characteristics of unsteady subsonic jets (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The effectiveness of jet unsteadiness in enhancing flow entrainment was assessed. It was conducted that entrainment depends on the type and amount of jet unsteadiness. Apparently, the mere introduction of jet unsteadiness by small sinusoidal flow angle variations is insufficient to enhance entrainment but, it should be noted that the results were obtained at measuring stations which are all many nozzle widths downstream of the jet nozzle. Thus, no fully conclusive statement can be made at this time about the entrainment close to the nozzle. The high entrainment of the fluidically oscillated jet was caused by the high-frequency content of this square wave type of oscillation but more detailed measurements are clearly needed, in particular for the fluidically oscillated and the pulsed jets. Practical ejector application requires the proper trade-off between entrainment and primary nozzle thrust efficiency.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Workshop on Thrust Augmenting Ejectors; p 311-324
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 72
    facet.materialart.
    Unknown
    Some tests on small-scale rectangular throat ejector (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A small scale rectangular throat ejector with plane slot nozzles and a fixed throat area was tested to determine the effects of diffuser sidewall length, diffuser area ratio, and sidewall nozzle position on thrust and mass augmentation. The thrust augmentation ratio varied from approximately 0.9 to 1.1. Although the ejector did not have good thrust augmentation performance, the effects of the parameters studied are believed to indicate probable trends in thrust augmenting ejectors.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Workshop on Thrust Augmenting Ejectors; p 239-251
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 73
    facet.materialart.
    Unknown
    An Exploratory Investigation of the Effect of Plastic Coating on the Profile Drag of a Practical-Metal-Construction Sailplane Airfoil (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: An exploratory investigation was performed in the Langley low-turbulence pressure tunnel to determine the effect of a plastic coating on the profile drage of a practical-metal-construction sailplaine airfoil. The mode was tested with three surface configurations: (1) filled, painted, and sanded smooth; (2) rough bare metal; and (3) plastic-coated. The investigation was conducted at Reynolds numbers based on airfoil chord of 1,100,000, 2,200,000, and 3,300,000 at a constant Mach number of 0.10. The results indicate that, at all three Reynolds numbers, the order of the drag values of the three surface configurations, starting with the highest drag, was: filled, painted, and sanded smooth; rough bare metal; and plastic-coated.
    Keywords: AERODYNAMICS
    Type: The Sci. and Technol. of Low Speed and Motorless Flight, Pt. 1; p 33-64
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 74
    facet.materialart.
    Unknown
    A simple apparatus for the experimental study of non-steady flow thrust-augmenter ejector configurations (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A flexible, and easily modified, test rig is described which allows a one dimensional nonsteady flow stream to be generated, economically from a steady flow source of compressed air. This nonsteady flow is used as the primary stream in a nonsteady flow ejector constituting part of the test equipment. Standard piezo-electric pressure transducers etc. allow local pressures to be studied, as functions of time, in both the primary and secondary (mixed) flow portions of the apparatus. Provision is also made for measuring the primary and secondary mass flows and the thrust generated. Sample results obtained with the equipment are presented.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Workshop on Thrust Augmenting Ejector; p 325-349
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 75
    facet.materialart.
    Unknown
    Nonsteady-Flow Thrust Augmenting Ejectors (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Ejector augmenters in which the transfer of mechanical energy from the primary to the secondary flow takes place through the work of interface pressure forces are investigated. Nonsteady flow processes are analyzed from the standpoint of energy transfer efficiency and a comparison of a rotary jet augmenter to an ejector is presented.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Workshop on Thrust Augmenting Ejectors; p 187-203
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 76
    facet.materialart.
    Unknown
    Numerical prediction of 3-D ejector flows (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The use of parametric flow analysis, rather than parametric scale testing, to support the design of an ejector system offers a number of potential advantages. The application of available 3-D flow analyses to the design ejectors can be subdivided into several key elements. These are numerics, turbulence modeling, data handling and display, and testing in support of analysis development. Experimental and predicted jet exhaust for the Boeing 727 aircraft are examined.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Workshop on Thrust Augmenting Ejectors; p 55-70
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 77
    facet.materialart.
    Unknown
    The XFV-12A Thrust-Augmented Wing (TAW) prototype aircraft (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The XFV-12A, a unique V/STOL technology prototype aircraft being developed for the Navy, is described. The innovative design features a thrust augmented wing and a canard ejector. Structural, functional, and control test performances are discussed. Static tether test results are also discussed. Assessment of test results are given along with projections for future modification areas.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Workshop on Thrust Augmenting Ejectors; p 473-480
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 78
    facet.materialart.
    Unknown
    Reaction control system augmentation for V/STOL aircraft (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Advantages and problems associated with augmentation of reaction controls are discussed. The current status of compact ejector technology and the expected performance of known efficient designs for reaction control applications are presented.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Workshop on Thrust Augmenting Ejectors; p 417-436
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 79
    facet.materialart.
    Unknown
    On the rational design of compressible flow ejectors (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A fluid mechanics review of chemical laser ejectors is presented. The characteristics of ejectors with single and multiple driver nozzles are discussed. Methods to compute an optimized performance map in which secondary Mach number and performance are computed versus mass ratio, to compute the flow distortion at each optimized condition, and to determine the thrust area for the design point to match diffuser impedence are examined.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center. Workshop on Thrust Augmenting Ejectors; p 109-139
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 80
    facet.materialart.
    Unknown
    An overview of current Navy programs to develop thrust augmenting ejectors (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The primary objective of Navy sponsored research in thrust augmentation is the development of an improved augmenter for V/STOL application. In support of this goal, a data base is being established to provide an accurate prediction capability for use in ejector design. A general technology development of ejectors and associated effects presently is split into the more specific areas of lift and control, since thrust augmenting ejectors may be suitable for both. Research areas examined include advanced diffuser and end wall design; advanced primary nozzles; analytic studies; augmenting reaction controls; and nozzle design.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Workshop on Thrust Augmenting Ejectors; p 41-54
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 81
    facet.materialart.
    Unknown
    NASA overview (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The history of NASA efforts at Ames Research Center in researching the performance and application of thrusting augmentors is reviewed. Current objectives include: (1) parametric description of thrust augmentor application to STOL and V/STOL; (2) the use of theoretical and empirical data; (3) aircraft-augmentor integration; and (4) key design considerations for STOL transport and V/STOL fighter aircraft. Test facilities are described and ejector development and performance are assessed.
    Keywords: AERODYNAMICS
    Type: Workshop on Thrust Augmenting Ejectors; p 23-40
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 82
    facet.materialart.
    Unknown
    Design and test of a prototype scale ejector wing (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A two dimensional momentum integral analysis was used to examine the effect of changing inlet area ratio, diffuser area ratio, and the ratio of ejector length to width. A relatively wide range of these parameters was considered. It was found that for constant inlet area ratio the augmentation increases with the ejector length, and for constant length: width ratio the augmentation increases with inlet area ratio. Scale model tests were used to verify these trends and to examine th effect of aspect ratio. On the basis of these results, an ejector configuration was selected for fabrication and testing at a scale representative of an ejector wing aircraft. The test ejector was powered by a Pratt-Whitney F401 engine developing approximately 12,000 pounds of thrust. The results of preliminary tests indicate that the ejector develops a thrust augmentation ratio better than 1.65.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Workshop on Thrust Augmenting Ejectors; p 437-448
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 83
    facet.materialart.
    Unknown
    Coannular supersonic ejector nozzles (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The nozzles described exhibit a flow field which is supersonic except for the initial flow region, and the secondary mass flow is typically about five percent of the primary core flow. The features to improve the accuracy of the performance calculations are discussed. A special calculation is made to get as realistic a sonic line as possible for this geometry, using an analysis developed by Brown. The mixing between the secondary and core flows is treated to account for entrainment of the secondary flow into core. Both of these phenomena directly affect the pressure distribution on the shroud and therefore, the thrust that the nozzle produces. The importance of using a realistic sonic line and a mixing analysis is stressed.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Workshop on Thrust Augmenting Ejectors; p 385-396
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 84
    facet.materialart.
    Unknown
    Integration of ejectors into high-speed aircraft (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The integration of ejectors into forebodies is considered for transonic and supersonic flight. Topics discussed include mixing flow in ducts, prediction of flow fields and external aerodynamics.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Workshop on Thrust Augmenting Ejectors; p 225-238
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 85
    facet.materialart.
    Unknown
    Augmenting ejector endwall effects (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Rectangular inlet ejectors which had multiple hypermixing nozzles for their primary jets were investigated for the effects of endwall blowing on thrust augmentation performance. The ejector configurations tested had both straight wall and active boundary layer control type diffusers. Endwall flows were energized and controlled by simple blowing jets suitably located in the ejector. Both the endwall and boundary layer control diffuser blowing rates were varied to determine optimum performance. High area ratio diffusers with insufficient endwall blowing showed endwall separation and rapid degradation of thrust performance. Optimized values of diffuser boundary layer control and endwall nozzle blowing rates in an ejector augmenter were shown to achieve high levels of augmentation performance for maximum compactness.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Workshop on Thrust Augmenting Ejectors; p 253-271
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 86
    facet.materialart.
    Unknown
    Internal-external flow integration for a thin ejector-flapped wing section (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Thin airfoil theories of an ejector flapped wing section are reviewed. The global matching of the external airfoil flow with the ejector internal flow and the overall ejector flapped wing section aerodynamic performance are examined. Mathematical models of the external and internal flows are presented. The delineation of the suction flow coefficient characteristics are discussed. The idealized lift performance of an ejector flapped wing relative to a jet augmented flapped wing are compared.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Workshop on Thrust Augmenting
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 87
    facet.materialart.
    Unknown
    Wind tunnel tests of four flexible wing ultralight gliders (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The aerodynamic lift, drag, and pitching moment characteristics of four full scale, flexible wing, ultralight gliders were measured in the settling chamber of a low speed wind tunnel. The gliders were tested over a wide range of angle of attack and at two different velocities. Particular attention was devoted to the lift and pitching moment behavior at low and negative angles of attack because of the potential loss of longitudinal stability of flexible wing gliders in this regime. The test results were used to estimate the performance and longitudinal control characteristics of the gliders.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Res. Center Sci. and Technol. of Low Speed and Motorless Flight; p 557-589
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 88
    facet.materialart.
    Unknown
    Some new airfoils (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A computer approach to the design and analysis of airfoils and some common problems concerning laminar separation bubbles at different lift coefficients are briefly discussed. Examples of application to ultralight airplanes, canards, and sailplanes with flaps are given.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Res. Center The Sci. and Technol. of Low Speed and Motorless Flight, Pt. 1; p 131-154
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 89
    facet.materialart.
    Unknown
    Generation and breakdown of aerodynamic lift: Physical mechanism (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A contribution is given to an old problem: the explanation of the generation of aerodynamic lift. Physical models are described which provide a better understanding of the phenomena involved.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Res. Center The Sci. and Technol. of Low Speed and Motorless Flight, Pt. 1; p 93-102
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 90
    facet.materialart.
    Unknown
    Length and bursting of separation bubbles: A physical interpretation (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A physical interpretation of the observed form of the pressure distribution beneath a two-dimensional separation bubble which modified the external inviscid pressure distribution only locally is given in terms of boundary layer concepts. A simple method for estimating along a mean streamline entrained into the underside of a growing shear layer through the transition region is discussed, and predictions of bubble bursting conditions and a lower bound on the bubble length are compared with experiment.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Res. Center The Sci. and Technol. of Low Speed and Motorless Flight, Pt. 1; p 177-202
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 91
    facet.materialart.
    Unknown
    The effect of disturbance on a wing (1979)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Disturbances such as flap and aileron hinges and poorly faired spoilers were simulated in a computer wind tunnel. The total drag of a single roughness element does not depend only on the size of that element. Its position on the wing has a surprisingly strong effect. In particular, a roughness element on the convex side of a deflected flap or aileron causes a very substantial increase in drag. Very few experimental data are available for comparison. Good agreement with experiment can be achieved, however, by adapting a fictive step size. The correlation between the real roughness-element size and the drag increase remains to be determined. Simple, fundamental experiments are suggested which will allow a theoretical estimation of the drag increase due to roughness elements.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Res. Center The Sci. and Technol. of Low Speed and Motorless Flight, Pt. 1; p 81-92
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 92
    facet.materialart.
    Unknown
    An analysis of prop-fan/airframe aerodynamic integration (1978)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: An approach to aerodynamic integration of turboprops and airframes, with emphasis placed upon wing mounted installations is addressed. Potential flow analytical techniques were employed to study aerodynamic integration of the prop fan propulsion concept with advanced, subsonic, commercial transport airframes. Three basic configurations were defined and analyzed: wing mounted prop fan at a cruise Mach number of 0.8, wing mounted prop fan in a low speed configuration, and aft mounted prop fan at a cruise Mach number of 0.8.
    Keywords: AERODYNAMICS
    Type: NASA-CR-152186 , NAS 1.26:152186 , D6-47113
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 93
    facet.materialart.
    Unknown
    A correlation method to predict the surface pressure distribution on an infinite plate from which a jet is issuing (1978)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: A correlation method to predict pressures induced on an infinite plate by a jet issuing from the plate into a subsonic free stream was developed. The complete method consists of an analytical method which models the blockage and entrainment properties of the jet and a correlation which accounts for the effects of separation. The method was developed for jet velocity ratios up to ten and for radial distances up to five diameters from the jet. Correlation curves and data comparisons are presented for jets issuing normally from a flat plate with velocity ratios one to twelve. Also, a list of references which deal with jets in a crossflow is presented.
    Keywords: AERODYNAMICS
    Type: NASA-CR-152160 , NEAR-TR-160
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 94
    facet.materialart.
    Unknown
    Kinematics and dynamics of vortex rings in a tube (1979)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: Kinematic theory and flow visualization experiments were combined to examine the dynamic processes which control the evolution of vortex rings from very low to very high Reynolds numbers, and to assess the effects of the wall as a vortex ring travels up a tube. The kinematic relationships among the size, shape, speed, and strength of vortex rings in a tube were computed from the theory. Relatively simple flow visualization measurements were used to calculate the total circulation of a vortex rings at a given time. Using this method, the strength was computated and plotted as a function of time for experimentally produced vortex rings. Reynolds number relationships are established and quantitative differences among the three Reynolds number groups are discussed.
    Keywords: AERODYNAMICS
    Type: NASA-CR-166185 , SU-JIAA-TR-26
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 95
    facet.materialart.
    Unknown
    Pressure Distributions for the GA(W)-2 Airfoil with 20% Aileron, 25% Slotted Flap and 30% Fowler Flap (1978)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: Surface pressure distributions were measured for the 13% thick GA(W)-2 airfoil section fitted with 20% aileron, 25% slotted flap and 30% Fowler flap. All tests were conducted at a Reynolds number of 2.2 x 10 to the 6th power and a Mach number of 0.13. Pressure distribution and force and moment coefficient measurements are compared with theoretical results for a number of cases. Agreement between theory and experiment is generally good for low angles of attack and small flap deflections. For high angles and large flap deflections where regions of separation are present, the theory is inadequate. Theoretical drag predictions are poor for all flap-extended cases.
    Keywords: AERODYNAMICS
    Type: NASA-CR-2948 , AR-76-3
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 96
    facet.materialart.
    Unknown
    A higher order panel method for linearized supersonic flow (1979)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The basic integral equations of linearized supersonic theory for an advanced supersonic panel method are derived. Methods using only linear varying source strength over each panel or only quadratic doublet strength over each panel gave good agreement with analytic solutions over cones and zero thickness cambered wings. For three dimensional bodies and wings of general shape, combined source and doublet panels with interior boundary conditions to eliminate the internal perturbations lead to a stable method providing good agreement experiment. A panel system with all edges contiguous resulted from dividing the basic four point non-planar panel into eight triangular subpanels, and the doublet strength was made continuous at all edges by a quadratic distribution over each subpanel. Superinclined panels were developed and tested on s simple nacelle and on an airplane model having engine inlets, with excellent results.
    Keywords: AERODYNAMICS
    Type: NASA-CR-3062 , D6-48058
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 97
    facet.materialart.
    Unknown
    A theoretical investigation of ground effects on USB configurations (1979)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: A formulation predicts the variation of circulation forces and jet reaction forces in ground proximity as a function of ground height. The predicted results agree well with available experimental data. It is shown that the wing-alone theory is not capable of predicting the ground effect for USB configurations.
    Keywords: AERODYNAMICS
    Type: NASA-CR-159005 , CRINC/FRL-281-3
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 98
    facet.materialart.
    Unknown
    A three-dimensional viscous/potential flow interaction analysis method for multi-element wings: Modifications to the potential flow code to allow part-span, high-lift devices and close-interference calculations (1979)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The description of the modified code includes details of a doublet subpanel technique in which panels that are close to a velocity calculation point are replaced by a subpanel set. This treatment gives the effect of a higher panel density without increasing the number of unknowns. In particular, the technique removes the close approach problem of the earlier singularity model in which distortions occur in the detailed pressure calculation near panel corners. Removal of this problem allowed a complete wake relaxation and roll-up iterative procedure to be installed in the code. The geometry package developed for the new technique and also for the more general configurations is based on a multiple patch scheme. Each patch has a regular array of panels, but arbitrary relationships are allowed between neighboring panels at the edges of adjacent patches. This provides great versatility for treating general configurations.
    Keywords: AERODYNAMICS
    Type: NASA-CR-152277
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 99
    facet.materialart.
    Unknown
    Low-speed aerodynamic characteristics of a 13 percent thick medium speed airfoil designed for general aviation applications (1979)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: Wind tunnel tests were conducted to determine the low speed, two dimensional aerodynamic characteristics of a 13percent thick medium speed airfoil designed for general aviation applications. The results were compared with data for the 13 percent thick low speed airfoil. The tests were conducted over a Mach number range from 0.10 to 0.32, a chord Reynolds number range from 2.0 x 10 to the 6th power to 12.0 x 10 to the 6th power, and an angle of attack frange from about -8 deg to 10 deg. The objective of retaining good high-lift low speed characteristics for an airfoil designed to have good medium speed cruise performance was achieved.
    Keywords: AERODYNAMICS
    Type: NASA-TP-1498 , L-12976
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 100
    facet.materialart.
    Unknown
    A computer program to calculate the longitudinal aerodynamic characteristics of upper-surface-blown wing-flap configurations (1978)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: A user's manual is presented for a computer program in which a vortex-lattice lifting-surface method is used to model the wing and multiple flaps. The engine wake model consists of a series of closely spaced vortex rings with rectangular cross sections. The jet wake is positioned such that the lower boundary of the jet is tangent to the wing and flap upper surfaces. The two potential flow models are used to calculate the wing-flap loading distribution including the influence of the wakes from up to two engines on the semispan. The method is limited to the condition where the flow and geometry of the configurations are symmetric about the vertical plane containing the wing root chord. The results include total configuration forces and moments, individual lifting-surface load distributions, pressure distributions, flap hinge moments, and flow field calculation at arbitrary field points. The use of the program, preparation of input, the output, program listing, and sample cases are described.
    Keywords: AERODYNAMICS
    Type: NASA-CR-3005 , NEAR-TR-158
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...