ALBERT

Description / Table of Contents: The world's mountain ranges are the clearest manifestations of long-term deformation of the continental crust. As such they have attracted geological investigations for centuries. Throughout this long history of research a few keynote publications stand out. One of the most important is the Geological Survey's 1907 Memoir on The Geological Structure of the North-West Highlands of Scotland. The Memoir summarized some of the Geological Survey's finest work, and outlined many of the principles of field-based structural and tectonic analysis that have subsequently guided generations of geologists working in other mountain belts, both ancient and modern. The thematic set of 32 papers in this Special Publication celebrate the 100th anniversary of the 1907 Memoir by placing the original findings in both historical and modern contexts, and juxtaposing them against present-day studies of deformation processes operating not only in the NW Highlands, but also in other mountain belts.

Description / Table of Contents: This volume honours the career of Brian F. Windley, who has been hugely influential in helping to achieve our current understanding of the evolution of the continental crust, and who has inspired many students and scientists to pursue studies on the evolution of the continents. Brian has studied processes of continental formation and evolution on most continents and of all ages, and has educated and inspired two generations of geologists to undertake careers in studies of continental evolution. The volume is organized into six sections, including: oceanic and island arc systems and continental growth; tectonics of accretionary orogens and continental growth; growth and stabilization of continental crust; collisions and intraplate processes; Precambrian tectonics and the birth of continents; and active tectonics and geomorphology of continental collision and growth zones.

Description / Table of Contents: This book contains papers presented at a joint meeting of the Metamorphic Studies Group and IGCP Project 235 (Metamorphism and Geodynamics) held at University College Dublin in September 1987. Recent developments in the methods and application of geothermometry and geobarometry, relative thermobarometry and in textural and isotopic dating of metamorphic events are reviewed. New thermal and tectonic models for metamorphism in different tectonic settings are presented. Case studies make up a substantial part of the book, many in the form of short summary papers that describe P-T-t paths for specific field areas from different tectonic settings world-wide. The broad range of topics covered reflects the multidisciplinary character of research on the thermal evolution of metamorphic belts - an area that is opening up an exciting interface between petrology, geochronology and tectonics.

Description / Table of Contents: Contents: Part I. Brittle Deformation. - 2. Fractures and Joints. - 3. Introduction to Faults. - 4. Normal Faults. - 5. Thrust Faults. - 6. Strike Slip Faults. - 7. Stress. - 8. Mechanics of Fracturing and Faulting: Experiment and Theory. - 9. Mechanics of Natural Fractures and Faults. - Part II. Ductile Deformation. - 10. The Description of Folds. - 11. Foliations and Lineations in Deformed Rocks. - 12. Geometry of Homogeneous Strain. - 13. Kinematic Analysis of Folds. - 14. Analysis of Foliations and Lineations. - 15. Observations of Strain in Deformed Rocks. - Part III. Rheology. - 16. Macroscopic Aspects of Rock Deformation: Rheology and Experiment. - 17. Microscopic Aspects of Ductile Deformation: Mechanisms and Fabrics. - 18. Scale Models and Quantitative Models of Rock Deformation. - Part IV. Regional Associations of Structures. - 19. Development of Structures at Active Plate Margins. - 20. Anatomy and Tectonics of Orogenic Belts.

Description / Table of Contents: This thesis summarizes the results of the WSM project's second phase (1996 - 2008). In particular it presents the major achievements that have been accomplished with the WSM 2008 database release that has been compiled under the guidance of the author. Furthermore, the thesis briefly presents three of the author's numerical models that aim at quantification the temporal changes of the crustal stress field.

Description / Table of Contents: Following the late Neoproterozoic - early Cambrian breakup of the supercontinent Rodinia, Gondwana evolved as one of the principal continental masses on Earth, embracing most of South America, Africa, Australasia, Antarctica, much of western Europe and parts of Asia. Around its margins were various other terranes that had varying tectonic and biogeographical affinities with the main continental block. This book incorporates a series of reviews and multidisciplinary research papers that together explore the tectonic, palaeogeographical and palaeobiogeographical evolution of the elements that made up the peri-Gondwanan collage. The stratigraphical scope of the coverage embraces the late Precambrian through early Devonian, providing a comprehensive overview of structural, stratigraphical and biological evolution through this significant interval of Earth history. Integration of these various processes throughout the volume will be of broad-based interest to a wide range of geoscientists.

Description / Table of Contents: Fold-and-thrust belts occur worldwide, have formed in all eras of geological time, and are widely recognized as the most common mode in which the crust accommodates shortening. Much current research on the structure of fold-and-thrust belts is focused on structural studies of regions or individual structures and on the geometry and evolution of these regions employing kinematic, mechanical and experimental modelling. In keeping with the main trends of current research, this title is devoted to the kinematic evolution and structural styles of a number of fold-and-thrust belts formed from Palaeozoic to Recent times. The papers included in this book cover a broad range of different topics, from modelling approaches to predict internal deformation of single structures, 3D reconstructions to decipher the structural evolution of groups of structures, palaeomagnetic studies of portions of fold-and-thrust belts, geometrical and kinematical aspects of Coulomb thrust wedges and structural analyses of fold-and-thrust belts to unravel their sequence of deformations.

Description / Table of Contents: Tectonic motion of the Adria microplate exerts a first-order control on the tectonics, geology, seismology, resource distribution, and the geological hazards across a broad zone of south-central Europe and the north-central Mediterranean.

Description / Table of Contents: Contents: Part I: Subduction Zone Geodynamics.- Part II: Seismic Tomography and Anisotropy.- Part III: Great Subduction Zone Earthquakes.- Part IV: Seismogenic Zone Characterization.- Part V: Continental and Ridge Subduction Processes.

Description / Table of Contents: Since the advent of the mantle plume hypothesis in 1971, scientists have been faced with the problem that its predictions are not confirmed by observation. For thirty years, the usual reaction has been to adapt the hypothesis in numerous ways. As a result, the multitude of current plume variants now amounts to an unfalsifiable hypothesis.In the early 21st century demand became relentless for a theory that can explain melting anomalies in a way that fits the observations naturally and is forward-predictive. From this the Plate hypothesis emerged the exact inverse of the Plume hypothesis. The Plate hypothesis attributes melting anomalies to shallow effects directly related to plate tectonics. It rejects the hypothesis that surface volcanism is driven by convection in the deep mantle.Earth Science is currently in the midst of the kind of paradigm-challenging debate that occurs only rarely in any field. This volume comprises its first handbook. It reviews the Plate and Plume hypotheses, including a clear statement of the former. Thereafter it follows an observational approach, drawing widely from many volcanic regions in chapters on vertical motions of Earth's crust, magma volumes, time-progressions of volcanism, seismic imaging, mantle temperature and geochemistry.T

Description / Table of Contents: Contents:1. Structural geology and structural analysis; 2. Deformation; 3. Strain in rocks; 4. Stress; 5. Stress in the lithosphere; 6. Rheology; 7. Fracture and brittle deformation; 8. Faults; 9. Kinematics and paleostress in the brittle regime; 10. Deformation at the microscale; 11. Folds and folding; 12. Foliation and cleavage; 13. Lineations; 14. Boudinage; 15. Shear zones and mylonites; 16. Contractional regimes; 17. Extensional regimes; 18. Strike-slip, transpression and transtension; 19. Salt tectonics; 20. Balancing and restoration

Description / Table of Contents: This volume brings together a collection of papers that summarize current ideas and recent progress in the study of granite-related mineralization systems. They provide a combination of field, experimental and theoretical studies. Papers are grouped according to the main granite-related ore systems: granite-pegmatite, skarn and greisen-veins, porphyry, orogenic gold, intrusion-related, epithermal and porphyry-related gold and base metal, iron oxide copper gold (IOCG), and special case studies. The studies provide a broad spread in terms of both space and time, highlighting granite-related ore deposits from Europe (Russia, Sweden, Croatia and Turkey), the Middle East (Iran), Asia (Japan and China) and South America (Brazil and Argentina) and spanning rocks from Palaeoproterozoic to Miocene in age.

Description / Table of Contents: This collection of research and review papers addresses the question of structural evolution during deformation to high strains and the physical properties of rocks that have been affected by high-strain zones. The discussions range from natural examples at outcrop to microscopic studies. They include experiments and numerical models based on the active processes in high-strain zones as well as studies on the physical properties of highly strained rocks in the field and laboratory. Specific questions addressed include magnetotelluric imaging of faults, magnetic fabrics, fabric development, seismic properties of highly strained rocks, change of rheology with strain, influence of melt on the localization of deformation, the relationship between deformation and metamorphism as well as new methods in the analysis of deformation.

Description / Table of Contents: In Materials Science, investigations aiming to prepare new types of molecular sieves (porous materials) have opened a productive field of research inspired by the crystal structures of minerals. These new molecular sieves are distinct from zeolites in that they have different kinds of polyhedra that build up their structures. Of particular interest are the new molecular sieves characterized by a mixed "octahedral"-tetrahedral framework (heteropolyhedral frameworks), instead of a purely tetrahedral framework as in zeolites. Heteropolyhedral compounds have been extensively studied since the early 1990's, with particular attention having been focused on titanosilicates, such as ETS-4 (synthetic analog of the mineral zorite) and ETS-10. However, titanosilicates are not the only representatives of novel microporous mineral phases. The search for "octahedral"-tetrahedral silicates was extended to metals other than titanium, for instance, the zirconosilicates with the preparation of synthetic counterparts of the minerals gaidonnayite, petarasite and umbite. Many microporous heteropolyhedral compounds containing metals such as Nb, V, Sn, Ca and lanthanides, have been reported and a wide number of distinct structural types (e.g., rhodesite-delhayelite and tobermorite) have been synthesized and structurally characterized. Moreover, the potential applications of these novel materials have been evaluated, particularly in the areas of catalysis, separation of molecular species, ion exchange and optical and magnetic properties. A comprehensive review of the mineralogical, structural, chemical and crystal-chemical studies carried on natural phases may be extremely useful to inspire and favor investigations on analogs or related synthetic materials. A similar synergy between mineralogists and materials scientists already occurred in the "classical" case of zeolites, in which the wide and deep structural and crystal-chemical knowledge accumulated in the study of the natural phases was extraordinarily useful to the chemists who are active in the field of molecular sieves. In particular, the structural investigation of the natural phases may be extremely rewarding and helpful in orienting the work of synthesis and in understanding the nature of the synthetic products, for the following reasons: Whereas rarely the crystalline synthetic products are suitable for single-crystal structural investigations, the natural counterparts are often well crystallized. Crystallization in nature occurs from chemical systems characterized by a wide compositional range, thus producing compounds with a very rich and variable crystal chemistry, which may provide precious information, suggesting possible substituting elements and addressing the synthetic work in a very productive way. The present volume follows a meeting on "Micro- and mesoporous mineral phases" (Rome, December 6-7, 2004) that was jointly organized by the Accademia Nazionale dei Lincei (ANL) and the International Union of Crystallography (IUCr) via its Commission on Inorganic and Mineral Structures (CIMS). The meeting was convened by Fausto Calderazzo, Giovanni Ferraris, Stefano Merlino and Annibale Mottana and financially supported by several other organizations representing both Mineralogy (e.g., the International Mineralogical Association and the European Mineralogical Union) and Crystallography (e.g., the European Crystallographic Association and the Italian Association of Crystallography). To participants, ANL staff, organizations, and, in general, all involved persons, our sincere acknowledgments; in particular, we are grateful to Annibale Mottana who was able to convince the ANL Academicians to schedule and support the meeting. This volume of the RiMG series highlights the present knowledge on micro- and mesoporous mineral phases, with focus on their crystal-chemical aspects, occurrence and porous activity in nature and experiments. As zeolites are the matter of numerous ad hoc meetings and books - including two volumes in this series - they do not specifically appear in the present volume. The phases of the sodalite and cancrinite-davyne groups, which mineralogists consider distinct from zeolites, are instead considered (in the order, chapter 7 by W. Depmeier and part of chapter 8 by E. Bonaccorsi and S. Merlino, respectively). The first two chapters of the volume cover general aspects of porous materials. This includes the application of the IUPAC nomenclature developed for ordered porous materials to non-zeolite mineral phases (L.B. McCusker, chapter 1) and the extension to heteropolyhedral structures of a topological description by using nodes representing the coordination polyhedra (S.V. Krivovichev, chapter 2). Chapters from 3 to 7 are dedicated to various groups of heteropolyhedral porous structures for which the authors emphasize some of the more general aspects according to their research specialization. G. Ferraris and A. Gula (chapter 3) put the emphasis on the modular aspects of well-known porous phases (such as sepiolite, palygorskite and rhodesite-related structures) as well as on heterophyllosilicates that may be not strictly porous phases (according to the definition given in chapter 1) but could be the starting basis for pillared materials. The porous mineral phases typical of hyperalkaline rocks (such as eudialytes and labuntsovites) are discussed by N.V. Chukanov and I.V. Pekov under their crystal-chemical (chapter 4) and minerogenetic (chapter 5) aspects showing the role of ion exchange during the geological evolution from primary to later phases, with experimental cation exchange data also being reported. J. Rocha and Z. Lin (chapter 6) emphasize how research on the synthesis of octahedral-pentahedral-tetrahedral framework silicates has been inspired and motivated by the many examples of such materials provided by nature; synthesis, structure and possible technological applications of a wide number of these materials are also described. Following chapters 7 and 8 - which besides the cancrinite-davyne group, presents the crystallographic features of the minerals in the tobermorite and gyrolite groups - M. Pasero (chapter 9) illustrates the topological and polysomatic aspects of the "tunnel oxides," a historical name applied to porous oxides related to MnO2, and reviews their main technological applications. The next two chapters (10 and 11) draw attention to "unexpected" porous materials like apatite and sulfides. T.J. White and his team (chapter 10) convincingly show that the apatite structure type displays porous properties, some of which are already exploited. Chapter 10 also contains two appendices that report crystal and synthesis data for hundreds of synthetic apatites, a number that demonstrates how wide the interest is for this class of compounds. E. Makovicky (chapter 11) analyzes the structures of natural and synthetic sulfides and selenides showing that, even if experimental work proving porous activity is practically still missing, several structure types display promising channels. Chapter 12, by M. Mellini, is the only one dedicated to mesoporous mineral phases - which are crystalline compounds with pores wider than 2 nm. Examples discussed are carbon nanotubes, fullerenes - which occur also in nature - chrysotile, opal and, moving from channels to cages, clathrates.

Description / Table of Contents: The importance of sulfide minerals in ores has long been, and continues to be, a major reason for the interest of mineralogists and geochemists in these materials. Determining the fundamental chemistry of sulfides is key to understanding their conditions of formation and, hence, the geological processes by which certain ore deposits have formed. This, in turn, may inform the strategies used in exploration for such deposits and their subsequent exploitation. In this context, knowledge of structures, stabilities, phase relations and transformations, together with the relevant thermodynamic and kinetic data, is critical. As with many geochemical systems, much can also be learned from isotopic studies. The practical contributions of mineralogists and geochemists to sulfide studies extend beyond areas related to geological applications. The mining of sulfide ores, to satisfy ever increasing world demand for metals, now involves extracting very large volumes of rock that contains a few percent at most (and commonly less than one percent) of the metal being mined. This is true of relatively low value metals such as copper; for the precious metals commonly occurring as sulfides, or associated with them, the mineable concentrations (grades) are very much lower. The "as-mined" ores therefore require extensive processing in order to produce a concentrate with a much higher percentage content of the metal being extracted. Such mineral processing (beneficiation) involves crushing and grinding of the ores to a very fine grain size in order to liberate the valuable metal-bearing (sulfide) minerals which can then be concentrated. In some cases, the metalliferous (sulfide) minerals may have specific electrical or magnetic properties that can be exploited to enable separation and, hence, concentration. More commonly, froth flotation is used, whereby the surfaces of particles of a particular mineral phase are rendered water repellent by the addition of chemical reagents and hence are attracted to air bubbles pulsed through a mineral particle-water-reagent pulp. An understanding of the surface chemistry and surface reactivity of sulfide minerals is central to this major industrial process and, of course, knowledge of electrical and magnetic properties is very important in cases where those particular properties can be utilized. In the years since the publication of the first ever Reviews in Mineralogy volume (1974, at that time called MSA "Short Course Notes") which was entitled Sulfide Mineralogy, sulfides have become a focus of research interest for reasons centering on at least two other areas in addition to their key role in ore deposit studies and mineral processing technology. It is in these two new areas that much of the research on sulfides has been concentrated in recent years. The first of these areas relates to the capacity of sulfides to react with natural waters and acidify them; the resulting Acid Rock Drainage (ARD), or Acid Mine Drainage (AMD) where the sulfides are the waste products of mining, has the capacity to damage or destroy vegetation, fish and other aquatic life forms. These acid waters may also accelerate the dissolution of associated minerals containing potentially toxic elements (e.g., As, Pb, Cd, Hg, etc.) and these may, in turn, cause environmental damage. The much greater public awareness of the need to prevent or control AMD and toxic metal pollution has led to regulation and legislation in many parts of the world, and to the funding of research programs aimed at a greater understanding of the factors controlling the breakdown of sulfide minerals. We begin with a review of analytical methods for measuring and calibrating water contents in nominally anhydrous minerals by George Rossman. While infrared spectroscopy is still the most sensitive and most convenient method for detecting water in minerals, it is not intrinsically quantitative but requires calibration by some other, independent analytical method, such as nuclear reaction analysis, hydrogen manometry, or SIMS. A particular advantage of infrared spectroscopy, however, is the fact that it does not only probe the concentration, but also the structure of hydrous species in a mineral and in many cases the precise location of a proton in a mineral structure can be worked out based on infrared spectra alone. The methods and principles behind this are reviewed by Eugen Libowitzky and Anton Beran, with many illustrative examples. Compared to infrared spectroscopy, NMR is much less used in studying hydrogen in minerals, mostly due to its lower sensitivity, the requirement of samples free of paramagnetic ions such as Fe2+ and because of the more complicated instrumentation required for NMR measurements. However, NMR could be very useful under some circumstances. It could detect any hydrogen species in a sample, including such species as H2 that would be invisible with infrared. Potential applications of NMR to the study of hydrogen in minerals are reviewed by Simon Kohn. While structural models of "water" in minerals have already been deduced from infrared spectra several decades ago, in recent years atomistic modeling has become a powerful tool for predicting potential sites for hydrogen in minerals. The review by Kate Wright gives an overview over both quantum mechanical methods and classical methods based on interatomic potentials. Joseph Smyth then summarizes the crystal chemistry of hydrogen in high-pressure silicate and oxide minerals. As a general rule, the incorporation of hydrogen is not controlled by the size of potential sites in the crystal lattice; rather, the protons will preferentially attach to oxygen atoms that are electrostatically underbonded, such as the non-silicate oxygen atoms in some high-pressure phases. Moreover, heterovalent substitutions, e.g., the substitution of Al3+ for Si4+, can have a major effect on the incorporation of hydrogen. The second reason for even greater research interest in sulfide minerals arose initially from the discoveries of active hydrothermal systems in the deep oceans. The presence of life forms that have chemical rather than photosynthetic metabolisms, and that occur in association with newly-forming sulfides, has encouraged research on the potential of sulfide surfaces in catalyzing the reactions leading to assembling of the complex molecules needed for life on Earth. These developments have been associated with a great upsurge of interest in the interactions between microbes and minerals, and in the role that minerals can play in biological systems. In the rapidly growing field of geomicrobiology, metal sulfides are of major interest. This interest is related to a variety of processes including, for example, those where bacteria interact with sulfides as part of their metabolic activity and cause chemical changes such as oxidation or reduction, or those in which biogenic sulfide minerals perform a specific function, such as that of navigation in magnetotactic bacteria. The development of research in areas such as geomicrobiology and environmental mineralogy and geochemistry, is also leading to a greater appreciation of the role of sulfides (particularly the iron sulfides) in the geochemical cycling of the elements at or near the surface of the Earth. For example, the iron sulfides precipitated in the reducing environments beneath the surface of modern sediments in many estuarine areas may play a key role in the trapping of toxic metals and other pollutants. In our understanding of "Earth Systems," geochemical processes involving metal sulfides are an important part of the story. The main objective of the present text is to provide an up-to-date review of sulfide mineralogy and geochemistry. The emphasis is, therefore, on such topics as crystal structure and classification, electrical and magnetic properties, spectroscopic studies, chemical bonding, high and low temperature phase relations, thermochemistry, and stable isotope systematics. In the context of this book, emphasis is on metal sulfides sensu stricto where only the compounds of sulfur with one or more metals are considered. Where it is appropriate for comparison, there is brief discussion of the selenide or telluride analogs of the metal sulfides. When discussing crystal structures and structural relationships, the sulfosalt minerals as well as the sulfides are considered in some detail (see Chapter 2; also for definition of the term "sulfosalt"). However, in other chapters there is only limited discussion of sulfosalts, in part because there is little information available beyond knowledge of chemical composition and crystal structure. Given the dramatic developments in areas of research that were virtually non-existent at the time of the earlier reviews, major sections have been added here on sulfide mineral surface chemistry and reactivity, formation and transformation of metal-sulfur clusters and nanoparticles, modeling of hydrothermal precipitation, and on sulfides in biosystems. However, it should be emphasized that the growth in the literature on certain aspects of sulfide mineralogy over the past 20 years or so has been such that comprehensive coverage is not possible in a single volume. Thus, the general area of "sulfides in biosystems" is probably worthy of a volume in itself, and "environmental sulfide geochemistry" (including topics such as oxidative breakdown of sulfides) is another area where far more could have been written. In selecting areas for detailed coverage in this volume, we have been mindful of the existence of other relatively recent review volumes, including those in the RiMG series. It has also been our intention not to cover any aspects of the natural occurrence, textural or paragenetic relationships involving sulfides. This is published information that, although it may be supplemented by new observations, is likely to remain useful for a long period and largely not be superceded by later work. In the following chapters, the crystal structures, electrical and magnetic properties, spectroscopic studies, chemical bonding, thermochemistry, phase relations, solution chemistry, surface structure and chemistry, hydrothermal precipitation processes, sulfur isotope geochemistry and geobiology of metal sulfides are reviewed. Makovicky (Chapter 2) discusses the crystal structures and structural classification of sulfides and other chalcogenides (including the sulfosalts) in terms of the relationships between structural units. This very comprehensive survey, using a rather different and complementary approach to that used in previous review volumes, shows the great diversity of sulfide structures and the wealth of materials that remain to be characterized in detail. These materials include rare minerals, and synthetic sulfides that may represent as yet undescribed minerals. Pearce, Pattrick and Vaughan (Chapter 3) review the electrical and magnetic properties of sulfides, discussing the importance of this aspect of the sulfides to any understanding of their electronic structures (chemical bonding) and to applications ranging from geophysical prospecting and mineral extraction to geomagnetic and palaeomagnetic studies. Rapidly developing new areas of interest discussed include studies of the distinctive properties of sulfide nanoparticles. Wincott and Vaughan (Chapter 4) then outline the spectroscopic methods employed to study the crystal chemistry and electronic structures of sulfides. These range from UV-visible through infrared and Raman spectroscopies, to X-ray emission, photoemission and absorption, and to nuclear spectroscopies. Chemical bonding (electronic structure) in sulfides is the subject of the following chapter by Vaughan and Rosso (Chapter 5), a topic which draws on knowledge of electrical and magnetic properties and spectroscopic data as experimental input, as well as on a range of rapidly developing computational methods. Attention then turns to the thermochemistry of sulfides in a chapter by Sack and Ebel (Chapter 6) which is followed by discussion of phase equilibria at high temperatures in the review by Fleet (Chapter 7). Sulfides in aqueous systems, with emphasis on solution complexes and clusters, forms the subject matter of the chapter written by Rickard and Luther (Chapter 8). Sulfide mineral surfaces are the focus of the next two chapters, both by Rosso and Vaughan. The first of these chapters (Chapter 9) addresses characterization of the pristine sulfide surface, its structure and chemistry; the second (Chapter 10) concerns surface reactivity, including redox reactions, sorption phenomena, and the catalytic activity of sulfide surfaces. Reed and Palandri (Chapter 11) show in the next chapter how much can now be achieved in attempting to predict processes of sulfide precipitation in hydrothermal systems. The final chapters deal with two distinctive areas of sulfide mineralogy and geochemistry. Seal (Chapter 12) presents a comprehensive account of the theory and applications of sulfur isotope geochemistry; sulfur isotope fractionation can provide the key to understanding the natural processes of formation of sulfide deposits. In the final chapter, Posfai and Dunin-Borkowski (Chapter 13) review the rapidly developing area of sulfides in biosystems, discussing aspects of both sulfide mineral-microbe interactions and biomineralization processes involving sulfides.

Description / Table of Contents: This volume contains the contributions presented at a short course held in Golden, Colorado, October 25-27, 1996 in conjunction with the Mineralogical Society of America's (MSA) Annual Meeting with the Geological Society of America in Denver, Colorado. The field of reactive transport within the Earth Sciences is a highly multidisciplinary area of research. The field encompasses a number of diverse disciplines including geochemistry, geology, physics, chemistry, hydrology, and engineering. The literature on the subject is similarly spread out as can be seen by a perusal of the bibliographies at the end of the chapters in this volume. Because these distinct disciplines have evolved largely independently of one another, their respective treatments of reactive transport in the Earth Sciences are based on different terminologies, assumptions, and levels of mathematical rigor. This volume and the short course which accompanies it, is an attempt to some extent bridge the gap between these different disciplines by bringing together authors and students from different backgrounds. A wide variety of geochemical processes including such diverse phenomena as the transport of radiogenic and toxic waste products, diagenesis, hydrothermal ore deposit formation, and metamorphism are the result of reactive transport in the subsurface. Such systems can be viewed as open bio-geochemical reactors where chemical change is driven by the interactions between migrating fluids, solid phases, and organisms. The evolution of these systems involves diverse processes including fluid flow, chemical reaction, and solute transport, each with differing characteristic time scales. This volume focuses on methods to describe the extent and consequences of reactive flow and transport in natural subsurface systems. Our ability to quantify reactive transport in natural systems has advanced dramatically over the past decade. Much of this advance is due to the exponential increase in computer computational power over the past generation-geochemical calculations that took years to perform in 1970 can be performed in seconds in 1996. Taking advantage of this increase of computational power, numerous comprehensive reactive transport models have been developed and applied to natural phenomena. These models can be used either qualitatively or qualitatively to provide insight into natural phenomena. Quantitative models force the investigator to validate or invalidate ideas by putting real numbers into an often vague hypothesis and thereby starting the thought process along a path that may result in acceptance, rejection, or modification of the original hypothesis. Used qualitatively, models provide. insight into the general features of a particular phenomenon, rather than specific details. One of the major questions facing the use of hydrogeochemical models is whether or not they can be used with confidence to predict future evolution of groundwater systems. There is much controversy concerning the validity and uncertainties of non-reactive fluid flow systems. Adding chemical interaction to these flow models only confounds the problem. Although such models may accurately integrate the governing physical and chemical equations, many uncertainties are inherent in characterizing the natural system itself. These systems are inherently heterogeneous on a variety of scales rendering it impossible to know precisely the many details of the flow system and chemical composition of the host rock. Other properties of natural systems such as permeability and mineral surface area, to name just two, may never be known with any great precision, and in fact may be unknowable. Because of these uncertainties, it remains an open question as to what extent numerical models of groundwater flow and reactive transport wilI be useful in making accurate quantitative predictions. Nevertheless, reactive transport models should be able to predict the outcome for the particular representation of the porous medium used in the model. Finally, it should be mentioned that numerical models are often our only recourse to analyze such environmental problems as safe disposal of nuclear waste where predictions must be carried out over geologic time spans. Without such models it would be impossible to analyze such systems, because they involve times too long to perform laboratory experiments. The results of model calculations may affect important political decisions that must be made. Therefore, it is all the more important that models be applied and tested in diverse environments so that confidence and understanding of the limitations and strengths of model predictions are understood before irreversible decisions are made that could adversely affect generations to come.

Description / Table of Contents: At the time of the first printing (1996), interest in the element boron was growing rapidly. We felt that it was an opportune moment to ask investigators active in research on boron to review developments in their respective fields so that readers could learn what was-and wasn't-known about boron and its minerals, geochemistry and petrology. Since 1996, interest in boron has, if anything, increased, and continued demand for the Reviews in Mineralogy "boron bible" has motivated the Mineralogical Society of America to reprint the volume. Demand is reflected in citations, and according to ISI's Science Citation Index, the number of citations since publication to the volume is about 380, with some individual chapters having been cited as many as 44 times. In preparation for this printing, authors of 15 of the 19 original chapters have updated, corrected or added to their chapters within the constraints that no pages be added. Most addenda are bibliographies of literature published since 1996; a few also include summaries of significant findings. Addenda for each chapter follow the chapter, except for those for Chapters 1 and 2, which are merged onto pages 115-116 and 385. A table of new B-minerals since 1996 is given on p. 28, and many modifications were made to the table (p. 7-27) of B-minerals known prior to 1996 (corrections to formulae, mineral names, localities, etc.). Similar up-datings of Table 1 (p. 223) in Chapter 5 and numerous tables in Chapter 9 (p. 387) were undertaken, and Figure 15 in Chapter 11 (p. 619), which-embarrassingly-was missing from the first printing, has been supplied. Addenda to Chapter 13 are introduced on p. 744 and completed on p. 863 and 864. The following salient developments in research related to B are mentioned in the addenda: New minerals. Twenty-two boron minerals have been or are about to be described, and four more have been approved by the International Mineralogical Association, representing an increase of 10%, comparable to the increase in the number of all new minerals described during the same period (Anovitz and Grew, Chapter 1) Tourmaline group. In addition to four new tourmaline species, a new classification has been proposed. Another tourmaline, olenite, has been shown to contain substantial amounts of excess B in tetrahedral coordination, a finding that has revolutionized our view of tourmaline crystal chemistry (Werding and Schreyer, Chapter 3; references in addendum to Henry and Dutrow, Chapter 10). Boron isotopes. New techniques for measuring isotope ratios using secondary ion mass spectroscopy (SIMS) with the ion microprobe open up new opportunities for in situ analyses of individual grains and fluid inclusions (Hervig, Chapter 16). Boron isotopes have found applications in paleoceanography and thus add to the tools available for the study of past climates (Palmer and Swihart, Chapter 13). One of the major questions facing the use of hydrogeochemical models is whether or not they can be used with confidence to predict future evolution of groundwater systems. There is much controversy concerning the validity and uncertainties of non-reactive fluid flow systems. Adding chemical interaction to these flow models only confounds the problem. Although such models may accurately integrate the governing physical and chemical equations, many uncertainties are inherent in characterizing the natural system itself. These systems are inherently heterogeneous on a variety of scales rendering it impossible to know precisely the many details of the flow system and chemical composition of the host rock. Other properties of natural systems such as permeability and mineral surface area, to name just two, may never be known with any great precision, and in fact may be unknowable. Because of these uncertainties, it remains an open question as to what extent numerical models of groundwater flow and reactive transport wilI be useful in making accurate quantitative predictions. Nevertheless, reactive transport models should be able to predict the outcome for the particular representation of the porous medium used in the model. Finally, it should be mentioned that numerical models are often our only recourse to analyze such environmental problems as safe disposal of nuclear waste where predictions must be carried out over geologic time spans. Without such models it would be impossible to analyze such systems, because they involve times too long to perform laboratory experiments. The results of model calculations may affect important political decisions that must be made. Therefore, it is all the more important that models be applied and tested in diverse environments so that confidence and understanding of the limitations and strengths of model predictions are understood before irreversible decisions are made that could adversely affect generations to come.

Description / Table of Contents: Motivations and Opportunities. - Structural Mapping Techniques and Tools. - Characterizing Structures Using Differential Geometry. - Physical Quantities, Fields, Dimensions, and Scaling. - Deformation and Flow. - Force, Traction, and Stress. - Conservation of Mass and Momentum. - Elastic Deformation. - Brittle Behavior. - Viscous Flow. - Rheological Behavior. - Model Development and Methodology.

Description / Table of Contents: The publication of this volume occurs at the one-hundredth anniversary of 1905, which has been called the annus mirabilus because it was the year of a number of enormous scientific advances. Among them are four papers by Albert Einstein explaining (among other things) Brownian motion, the photoelectric effect, the special theory of relativity, and the equation E = mc2. Also of significance in 1905 was the first application of another major advance in physics, which dramatically changed the fields of Earth and planetary science. In March of 1905 (and published the following year), Ernest Rutherford presented the following in the Silliman Lectures at Yale: "The helium observed in the radioactive minerals is almost certainly due to its production from the radium and other radioactive substances contained therein. If the rate of production of helium from known weights of the different radioelements were experimentally known, it should thus be possible to determine the interval required for the production of the amount of helium observed in radioactive minerals, or, in other words, to determine the age of the mineral." Rutherford E (1906) Radioactive Transformations. Charles Scriber's Sons, NY Thus radioisotopic geochronology was born, almost immediately shattering centuries of speculative conjectures and estimates and laying the foundation for establishment of the geologic timescale, the age of the Earth and meteorites, and a quantitative understanding of the rates of processes ranging from nebular condensation to Quaternary glaciations. There is an important subplot to the historical development of radioisotopic dating over the last hundred years, which, ironically, arises directly from the subsequent history of the U-He dating method Rutherford described in 1905. Almost as soon as radioisotopic dating was invented, it was recognized that the U-He [or later the (U-Th)/He method], provided ages that were often far younger than those allowed by stratigraphic correlations or other techniques such as U/Pb dating. Clearly, as R.J. Strutt noted in 1910, He ages only provided "minimum values, because helium leaks out from the mineral, to what extent it is impossible to say" (Strutt, 1910, Proc Roy Soc Lond, Ser A 84:379-388). For several decades most attention was diverted to U/Pb and other techniques better suited to measurement of crystallization ages and establishment of the geologic timescale. Gradually it became clear that other radioisotopic systems such as K/Ar and later fission-track also provided ages that were clearly younger than formation ages. In 1910 it may have been impossible to say the extent to which He (or most other elements) leaked out of minerals, but eventually a growing understanding of thermally-activated diffusion and annealing began to shed light on the significance of such ages. The recognition that some systems can provide cooling, rather than formation, ages, was gradual and diachronous across radioisotopic systems. Most of the heavy lifting in this regard was accomplished by researchers working on the interpretation of K/Ar and fission-track ages. Ironically, Rutherfordπs He-based radioisotopic system was one of the last to be quantitatively interpreted as a thermochronometer, and has been added to K/Ar (including 40Ar/39Ar) and fission-track methods as important for constraining the medium- to low-temperature thermal histories of rocks and minerals. Thermochronology has had a slow and sometimes fitful maturation from what were once troubling age discrepancies and poorly-understood open-system behaviors, into a powerful branch of geochronology applied by Earth scientists from diverse fields. Cooling ages, coupled with quantitative understanding of crystal-scale kinetic phenomena and crustal- or landscape-scale interpretational models now provide an enormous range of insights into tectonics, geomorphology, and subjects of other fields. At the same time, blossoming of lower temperature thermochronometric approaches has inspired new perspectives into the detailed behavior of higher temperature systems that previously may have been primarily used for establishing formation ages. Increased recognition of the importance of thermal histories, combined with improved analytical precision, has motivated progress in understanding the thermochronologic behavior of U/Pb, Sm/Nd, Lu/Hf, and other systems in a wide range of minerals, filling out the temperature range accessible by thermochronologic approaches. Thus the maturation of low- and medium-temperature thermochronology has led to a fuller understanding of the significance of radioisotopic ages in general, and to one degree or another has permeated most of geochronology. Except in rare cases, the goal of thermochronology is not thermal histories themselves, but rather the geologic processes responsible for them. Thermochronometers are now routinely used for quantifying exhumation histories (tectonic or erosional), magmatism, or landscape evolution. As thermochronology has matured, so have model and interpretational approaches used to convert thermal histories into these more useful geologic histories. Low-temperature thermochronology has been especially important in this regard, as knowledge of thermal processes in the uppermost few kilometers of the crust require consideration of coupled interactions of tectonic, geodynamic, and surface processes. Exciting new developments in these fields in turn drive improved thermochronologic methods and innovative sampling approaches. The chapters This volume presents 22 chapters covering many of the important modern aspects of thermochronology. The coverage of the chapters ranges widely, including historical perspective, analytical techniques, kinetics and calibrations, modeling approaches, and interpretational methods. In general, the chapters focus on intermediate- to low-temperature thermochronometry, though some chapters cover higher temperature methods such as monazite U/Pb closure profiles, and the same theory and approaches used in low-temperature thermochronometry are generally applicable to higher temperature systems. The widely used low- to medium-temperature thermochronometric systems are reviewed in detail in these chapters, but while there are numerous chapters reviewing various aspects of the apatite (U-Th)/He system, there is no chapter singularly devoted to it, partly because of several previous reviews recently published on this topic. Chapter 1 by Reiners, Ehlers, and Zeitler provides a perspective on the history of thermochronology, comments on modern work in this field and general lessons on the potential for noise to be turned into signal. This chapter also provides a summary of the current challenges, unresolved issues, and most exciting prospects in the field. Much of the modern understanding of kinetic controls on apparent ages, thermal histories, and sampling approaches comes from decades of progress in fission-track dating, a method that remains as essential as ever, partly because of the power of track-length measurements and the depth of (at least empirical) understanding of the kinetics of track annealing. Tagami, Donelick and OπSullivan review the fundamentals of modern fission-track dating (Chapter 2). Two of the most commonly dated, well-understood, and powerful minerals dated by fission-track methods are apatite and zircon, and the specifics of modern methods for these systems and their kinetics are reviewed by Donelick, OπSullivan, and Ketcham (Chapter 3), and Tagami (Chapter 4). Although 40Ar/39Ar and (U-Th)/He dating methods followed somewhat different paths to their modern thermochronologic incarnations, they have many features in common, especially in the kinetics of diffusion and closure. Zeitler and Harrison review the concepts underlying both 40Ar/39Ar and (U-Th)/He methods (Chapter 5). Zircon was one of the first minerals dated by the (U-Th)/He method, but has only just begun to be used for thermochronometry of both bedrock and detrital samples, as reviewed by Reiners (Chapter 6). Continuous time-temperature paths from intracrystalline variations of radiogenic Ar proven perhaps the most powerful of all thermochronologic approaches, and an innovative analogous approach in He dating (4He/3He thermochronometry) is revealing remarkably powerful constraints on the extreme low temperature end of thermal histories, as reviewed by Shuster and Farley (Chapter 7). Thermochronology of detrital minerals provides unique constraints on the long-term evolution of orogens, sediment provenance, and depositional age constraints, to name a few. Bernet and Garver (Chapter 8) review the essentials of detrital zircon fission-track dating, one of the most venerable and robust of detrital thermochronometers, and in Chapter 9, Hodges, Ruhl, Wobus, and Pringle review the use of 40Ar/39Ar dating of detrital minerals, demonstrating the power of detrital muscovite ages in illuminating variations in exhumation rates in catchments over broad landscapes. (U-Th)/He thermochronometry presents several unique interpretational challenges besides new kinetics and low temperature sensitivity. One of these is long-alpha stopping distances, and its coupling with diffusion and U-Th zonation in age corrections. Dunai reviews modeling approaches to deal with these issues in interpreting low-temperature thermal histories (Chapter 10). Ketcham (Chapter 11) reviews the theory and calibration of both forward and inverse models of thermal histories from fission-track and (U-Th)/He data, and makes some important points about the interpretations of such models. Translating thermal histories into exhumational histories and their tectonic or geomorphic significance across a landscape requires quantitative understanding of the thermal structure of the crust and how it is perturbed, a review of which is presented by Ehlers (Chapter 12). Braun (Chapter 13) illustrates the power of low-temperature thermochronometry to constrain topographic evolution of landscapes over time, using PECUBE. Gallagher, Stephenson, Brown, Holmes, and Ballester present a novel method of inverse modeling of fission-track and (U-Th)/He data for thermal histories over landscapes (Chapter 14). Continuous time-temperature paths from closure profiles or their step-heating-derived equivalents are, to some degree, the holy grail of thermochronology. Harrison, Zeitler, Grove, and Lovera (Chapter 15) provide a review of the theory, measurement, and interpretation of continuous thermal histories at both intermediate and high temperatures, derived from both K-feldspar 40Ar/39Ar and monazite U/Pb dating. Extensional orogens provide a special challenge and opportunity for thermochronometry because tectonic exhumation by footwall unroofing often outstrips erosional exhumation, and often occurs at high rates. As Stockli shows (Chapter 16) thermochronology in these setting provides opportunities to measure rates of a number of important processes, as well as obtain a snapshot of crustal thermal structure and its imprint on thermochronometers with varying closure temperatures. Spotila (Chapter 17) reviews the use of thermochronology applied to tectonic geomorphology in a wide range of orogenic settings, introducing the concept of denudational maturity. Thermochronology has found great utility in economic geology, and newly developed approaches pose great potential in this area, and shown by McInnes, Evans, Fu, and Garwin in their review of the use and modeling of thermochronology of hydrothermal ore deposits (Chapter 18). The thermal histories of sedimentary basins are also critical to understanding thermal maturation of hydrocarbons, but are also critical for understanding basin formation, erosional histories of source regions, fluid flow, and climate change and other temporal signals preserved in sedimentary rocks. Armstrong (Chapter 19) reviews these issues and the use of thermochronology in deducing the thermal histories of sedimentary basins. Drawing on large datasets of bedrock apatite fission-track dates, Kohn, Gleadow, Brown, Gallagher, Lorencak, and Noble demonstrate the power of modeling, and, importantly, effectively visualizing, integrated thermotectonic and denudational histories over large regions (Chapter 20). Thermal histories of meteorites provide constraints on a wide range of fundamentally important processes, including nebular condensation and early solar-system metamorphic histories, and the dynamics of interplanetary collisions and shock metamorphism. Min reviews thermochronologic approaches to understanding meteorite thermal histories (Chapter 21), including new methods and approaches. Finally, the importance of robust models with which to interpret thermochronologic data is underscored by the review of the Software for Interpretation and Analysis of Thermochronologic Data (Chapter 22), summarized and compiled by Ehlers, for programs associated with the work of authors in this volume and others.

Description / Table of Contents: Contents: A framework of microtectonic studies.- Flow and deformation. - Deformation mechanisms. - Foliations, lineations and lattice preferred orientation. - Shear zones. - Dilatation sites - veins, strain shadows, fringes and boudins. - Porphyroblasts and reaction rims. - Primary structures. - Natural microgauges. - Special techniques. - Experimental modelling techniques. - From sample to section.

Description / Table of Contents: With the ever increasing spatial resolution in the characterization of microstructures, textures and chemical as well as isotopic patterns and the continuously improving sensitivity and precision in mineral chemical and isotopic analysis, increasing evidence has emerged indicating that phase relations in rocks from high-temperature environments may be modified during exhumation and cooling and that the original equilibrium phase relations may not have been preserved or that equilibrium may never have been attained fully even at high temperatures. This volume accompanies an EMU School intended bring contemporary research on mineral reaction kinetics to the attention of young researchers and to put it into the context of recent developments in related disciplines. The school and the accompanying volume cannot give a comprehensive review of the current state of geomaterials research. Rather a selection of topics, methods and concepts, which the contributors deem currently most relevant and instructive, is presented. The aim is to provide a methodologically sound insight into the theoretical foundations of mineral reaction kinetics, to help students to become acquainted with contemporary methods in experimentation and analytical techniques, and to give worked examples that illustrate recent advances in geoscience based on an improved characterization and understanding of mineral and rock systems.

Description / Table of Contents: Faulting and fracturing play an important role in enhancing permeability, facilitating flow and controlling hydrothermal mineralization in rocks. This is the main theme of this volume and the papers included are intended to provide an overview of current ideas at the interfaces of structural geology, fluid flow and mineralization research. Included are speculative, but provocative ideas that should stimulate a re-examination of existing concepts regarding fluid flow in fractures systems and the formation of hydrothermal mineral deposits. Also highlighted are recent advances showing the significance of the development of fracture connectivity in focusing fluid flow. The collection concludes with a thermatic set of papaers presenting new research results on the genesis of the world-famous Carboniferous base metal deposits of Ireland. The volume is intended for geoscientists studying the floe of fluids through fault, vien and fracture systems or the genesis of mineral deposits and will be of interest principally to those involved in the minerals industry and in academia.

Description / Table of Contents: Content: Part I The Main Players. Rifted Margins: Building Blocks of Later Collision. - Intra-oceanic Subduction Zones. - The Subductability of Continental Lithosphere:The Before and After Story. - The Seismic Structure of Island Arc Crust. - Vertical Stratification of Composition, Density, and InferredMagmatic Processes in Exposed Arc Crustal Sections. - The Generation and Preservation of Mineral Deposits in Arc Continent Collision Environments. - Part II Specific Examples of Arc-Continent Collision: The Nature of the Banda Arc Continent Collisionin the Timor Region. - The Arc Continent Collision in Taiwan. - Early Eocene Arc Continent Collision in Kamchatka, Russia:Structural Evolution and Geodynamic Model. - The Asia Kohistan India Collision: Review and Discussion. - Processes of Arc Continent Collision in the Uralides. - The Record of Ordovician Arc Arc and Arc Continent Collisions in the Canadian Appalachians During the Closure of Iapetus. - Arc Continent Collision in the Ordovician of Western Ireland: Stratigraphic, Structural and Metamorphic Evolution. - Multiple Arc Development in the Paleoproterozoic Wopmay Orogen, Northwest Canada. - Part III Models of Arc-Continent Collision Processes: The Origin of Obducted Large-Slab Ophiolite Complexes. - Physical Modeling of Arc Continent Collision: A Reviewof 2D, 3D, Purely Mechanical and Thermo Mechanical Experimental Models. - Part IV Putting it All Together: Arc Continent Collision: The Making of an Orogen

Description / Table of Contents: This book presents a series of review articles on nine important ancient orogens on Earth. Comparison of these mountain belts provides a wealth of information for the debate on whether there has been a change in mountain-building processes through the history of the Earth. As a precursor to these papers, the rheology of the Earth’s lithosphere through time is reviewed. Theoretical analysis and insight into the behaviour of the lithosphere of other planets constrain mechanical considerations of the Earth’s lithosphere. It is clear from these overviews that geodynamic concepts and modelling, and new techniques such as deep seismic profiling and geochronology are having a profound impact on orogenic studies. It is also clear that orogenesis must not be equated with the Wilson cycle, culminating in continent-continent collision. Subduction-related orogens and intraplate orogens are also significant.

Description / Table of Contents: This volume was prepared for a short course by the same title, organized by Russell J. Hemley and Ho-kwang Mao and sponsored by the Mineralogical Society of America, December 4-6, 1998 on the campus of the University of California at Davis. High-pressure mineralogy has historically been a vital part of the geosciences, but it is only in the last few years that the field has emerged as a distinct discipline as a result of extraordinary recent developments in high-pressure techniques. The domain of mineralogy is now no less than the whole Earth, from the deep crust to the inner core-the entire range of pressures and temperatures under which the planet's constituents were formed or now exist. The primary goal of this field is to determine the physical and chemical properties of materials that underlie and control the structural and thermal state, processes, and evolution of the planet. New techniques that have come 'online' within the last couple of years make it possible to determine such properties under extreme pressures and temperatures with an accuracy and precision that rival measurements under ambient conditions. These investigations of the behavior of minerals under extreme conditions link the scale of electrons and nuclei with global processes of the Earth and other planets in the solar system. It is in this broad sense that the term 'Ultrahigh-Pressure Mineralogy' is used for the title of this volume of Reviews in Mineralogy. This volume sets out to summarize, in a tutorial fashion, knowledge in this rapidly developing area of physical science, the tools for obtaining that knowledge, and the prospects for future research. The book, divided into three sections, begins with an overview (Chapter 1) of the remarkable advances in the ability to subject minerals-not only as pristine single-crystal samples but also complex, natural mineral assemblages-to extreme pressure-temperature conditions in the laboratory. These advances parallel the development of an arsenal of analytical methods for measuring mineral behavior under those conditions. This sets the stage for section two (Chapters 2-8) which focuses on high-pressure minerals in their geological setting as a function of depth. This top-down approach begins with what we know from direct sampling of high-pressure minerals and rocks brought to the surface to detailed geophysical observations of the vast interior. The third section (Chapters 9-19) presents the material fundamentals, starting from properties of a chemical nature, such as crystal chemistry, thermochemistry, element partitioning, and melting, and moving toward the domain of mineral physics such as melt properties, equations of state, elasticity, rheology, vibrational dynamics, bonding, electronic structure, and magnetism. The Review thus moves from the complexity of rocks to their mineral components and finally to fundamental properties arising directly from the play of electrons and nuclei. The following themes crosscut its chapters. Composition of the mantle and core Our knowledge of the composition of the Earth in part is rooted in information on cosmochemical abundances of the elements and observations from the geological record. But an additional and essential part of this enterprise is the utilization of the growing information supplied by mineral physics and chemistry in detailed comparison with geophysical (e.g. seismological) observations for the bulk of the planet. There is now detailed information from a variety of sources concerning crust-mantle interactions in subduction (Liou et aI., Chapter 2; Mysen et aI., Chapter 3). Petrological, geochemical, and isotope studies indicate a mantle having significant lateral variability (McDonough and Rudnick, Chapter 4). The extent of chemical homogeneity versus layering with depth in the mantle, a question as old as the recognition of the mantle itself, is a first-order issue that threads its way throughout the book. Agee (Chapter 5) analyzes competing models in terms of mineral physics, focusing on the origin of seismic discontinuities in the upper mantle. Bina (Chapter 6) examines the constraints for the lower mantle, with particular emphasis given to the variation of the density and bulk sound velocity with depth through to the core-mantle boundary region (Jeanloz and Williams, Chapter 7). Stixrude and Brown (Chapter 8) examine bounds on the composition of the core. Mineral elasticity and the link to seismology The advent of new techniques is raising questions of the mineralogy and composition of the deep Interior to a new level. As a result of recent advances in seismology, the depth-dependence of seismic velocities and acoustic discontinuities have been determined with high precision, lateral heterogeneities in the planet have been resolved, and directional anisotropy has been determined (Chapters 6 and 7). The first-order problem of constraining the composition and temperature as a function of depth alone is being redefined by high-resolution velocity determinations that define lateral chemical or thermal variations. As discussed by Liebermann and Li (Chapter 15), measurements of acoustic velocities can now be carried out simultaneously at pressures that are an order of magnitude higher, and at temperatures that are a factor of two higher, than those possible just a few years ago. The tools are in hand to extend such studies to related properties of silicate melts (Dingwell, Chapter 13). Remarkably, the solid inner core is elastically anisotropic (Chapter 8); with developments in computational methods, condensed-matter theory now provides robust and surprising predictions for this effect (Stixrude et aI., Chapter 19), and with very recent experimental advances, elasticity measurements of core material at core pressures can be performed directly (Chapters 1 and 15). Mantle dynamics The Earth is a dynamic planet: the rheological properties of minerals define the dynamic flow and texture of material within the Earth. Measurement of rheological properties at mantle pressures is a significant challenge that can now be addressed (Weidner, Chapter 16). Deviatoric stresses down to 0.1 GPa to pressures approaching 300 GPa can be quantified in high-pressure cells using synchrotron radiation (Chapter 1). The stress levels are an appropriate scale for understanding earthquake genesis, including the nature of earthquakes that occur at great depth in subducted slabs (deep-focus earthquakes) as these slabs travel through the Earth's mantle. Newly developed high-pressure, high-precision x-ray tools such as monochromatic radiation with modern detectors with short time resolution and employing long duration times are now possible with third-generation synchrotron sources to study the rheology of deep Earth materials under pressure (Chapter 1). Fate of subducting slabs One of the principal interactions between the Earth's interior and surface is subduction of lithosphere into the mantle, resulting in arc volcanoes, chemical heterogeneity in the mantle, as well as deep-focus earthquakes (Chapters 2 and 3). Among the key chemical processes associated with subduction is the role of water in the recycling process (Prewitt and Downs, Chapter 9), which at shallower levels is essential for understanding arc volcanism. Mass and energy transport processes govern global recycling of organic and inorganic materials, integration of these constituents in the Earth's interior, the evolution (chemically and physically) of descending slabs near convergent plate boundaries, and the fate of materials below and above the descending slab. Chapters 5 and 6 discuss the evidence for entrainment and passage of slabs through the 670 km discontinuity, and the possibility of remnant slabs in the anomalous D" region near the core-mantle boundary (Chapter 7). The ultimate fate of the materials cycled to such depths may affect interactions at the core-mantle boundary and may also hold clues to the initiation of diapiric rise. The evolution and fate of a subducting slab can now be addressed by experimental simulation of slab conditions, including in situ monitoring of a simulated slab in high-pressure apparatus in situ x-ray and spectroscopic techniques. The chemistry of volatiles changes appreciably under deep Earth conditions: they can be structurally bound under pressure (Prewitt and Downs, Chapter 9). Melting Understanding pressure-induced changes in viscosity and other physical properties of melts is crucial for chemical differentiation processes ranging from models of the magma ocean in the Earth's early history to the formation of magmatic ore deposits. (Chapter 13). Recent evidence suggests that melting may take place at great depth in the mantle. Seismic observations of a low-velocity zone and seismic anisotropy at the base of the mantle have given rise to debate about the existence of regions of partial melt deep in the mantle (Chapter 7). Deep melting is also important for mantle convection from subduction of the lithosphere to the rising of hot mantle plumes. Very recent advances in determination of melting relations of mantle and core materials with laser-heating techniques are beginning to provide accurate constraints (Shen and Heinz, Chapter 12). Sometimes lost in the debate on melting curves is the fact that a decade ago, there simply were no data for most Earth materials, only guesses and (at best) approximate models. Moreover, it is now possible to carry out in situ melting studies on multi-component systems, including natural assemblages, to deep mantle conditions. These results address whether or not partial melting is responsible for the observed seismic anomalies at the base of the mantle and provide constraints for mantle convection models (Chapter 7). The enigma of the Earth's core The composition, structure, formation, evolution, and current dynamic state of the Earth's core is an area of tremendous excitement (Chapter 8). The keys to understanding the available geophysical data are the material properties of liquid and crystalline iron under core conditions. New synchrotron-based methods and new developments in theory are being applied to determine all of the pertinent physical properties, and in conjunction with seismological and geodynamic data, to develop a full understanding of the core and its interactions with the mantle (Chapter 7). There has been considerable progress in determining the melting and phase relations of iron into the megabar range with new techniques (Chapter 12). Constraints are also obtained from theory (Chapter 19). These results feed into geophysical models for the outer and inner core flow, structural state, evolution, and the geodynamo. Moreover, there is remarkable evidence that the Earth's inner core rotates at a different rate than the rest of the Earth. This evidence in turn rests on the observation that the inner core is elastically anisotropic, a subject of current experimental and theoretical study from the standpoint of mineral physics, as described above. The thermodynamic framework Whole Earth processes must be grounded in accurate thermodynamic descriptions of phase equilibria in multi-component systems, as discussed by Navrotsky (Chapter 10). New developments in this area include increasingly accurate equations of state (Duffy and Wang, Chapter 14) required for modeling of phase equilibria as well as for direct comparison with seismic density profiles through the planet. Recent developments in in situ vibrational spectroscopy and theoretical models provide a means for independently testing available thermochemical data and a means for extending those data to high pressures and temperatures (Gillet et aI., Chapter 17). Accurate determinations of crystal structures provide a basis for understanding thermochemical trends (Chapter 9). Systematics for understanding solid-solution behavior and element partitioning are now available, at least to the uppermost regions of the lower mantle (Fei, Chapter 11). New measurements for dense hydrous phases are beginning to provide answers to fundamental questions regarding their stability of hydrous phases in the mantle (Chapters 3 and 9) and the partitioning of hydrogen and oxygen between the mantle and core (Chapter 8). Novel physical phenomena at ultrahigh pressures One of the key recent findings in high-pressure research is the remarkable effect of pressure on the chemistry of the elements, at conditions ranging from deep metamorphism of crustal minerals (Chapter 2) to "contact metamorphism" at the core-mantle boundary (Chapter 7). Pressure-induced changes in Earth materials represent forefront problems in condensed-matter physics. New crystal structures appear and the chemistry of volatiles changes (Chapter 9). Pressure-induced electronic transitions and magnetic collapse in transition metal ions strongly affect mineral properties and partitioning of major, minor, and trace elements (Chapter 11). Evidence for these transitions from experiment (Chapter 18) and theory (Chapter 19) is important for developing models for Earth formation and chemical differentiation. The conventional view of structurally and chemically complex minerals of the crust giving way to simple, close-packed structures of the deep mantle and a simple iron core is being replaced by a new chemical picture wherein dense silicates, oxides, and metals exhibit unusual electronic and magnetic properties and chemistry. In the end, this framework must dovetail with seismological observations indicating an interior of considerable regional variability, both radially and laterally depending on depth (e.g. Chapters 6 and 7). New classes of global models Information concerning the chemical and physical properties of Earth materials at high pressures and temperatures is being integrated with geophysical and geochemical data to create a more comprehensive global view of the state, processes, and history of the Earth. In particular, models of the Earth's interior are being developed that reflect the details contained in the seismic record but are bounded by laboratory information on the physics and chemistry of the constituent materials. Such "Reference Earth Models" includes the development of reference data sets and modeling codes. Tools that produce seismological profiles from hypothesized mineralogies (Chapters 4 and 5) are now possible, as are tools for testing these models against 'reference' seismological data sets (Chapter 6). These models incorporate the known properties of the Earth, such as crust and lithosphere structure, and thus have both an Earth-materials and seismological orientation. Other planets The Earth cannot be understood without considering the rest of the solar system. The terrestrial planets of our solar system share a common origin, and our understanding of the formation of the Earth is tied to our understanding of the formation of its terrestrial neighbors, particularly with respect to evaluating the roles of homogeneous and heterogeneous processes during accretion. As a result of recent developments in space exploration, as well as in the scope of future planetary missions, we have new geophysical and geochemical data for the other terrestrial planets. Models for the accretion history of the Earth can now be reevaluated in relation to this new data. Experiments on known Earth materials provide the thermodynamic data necessary to calculate the high-pressure mineralogy of model compositions for the interior of Mars and Venus. Notably, the outer planets have the same volatile components as the Earth, just different abundances. Studies of the outer planets provide both an additional perspective on our own planet as well as a vast area of opportunity for application of these newly developed experimental techniques (Chapter 1 and 17). New techniques in the geosciences The utility of synchrotron radiation techniques in mineralogy has exceeded the expectations of even the most optimistic. New spectroscopic methods developed for high-pressure mineralogy are now available for characterizing small samples from other types of experiments. For example, the same techniques developed for in situ studies at high pressures and temperatures are being used to investigate microscopic inclusions such as coesite in high-pressure metamorphic rocks (Chapter 2) and deep-mantle samples as inclusions in diamond (Chapter 3). With the availability of a new generation of synchrotron radiation sources (Chapter 1) and spectroscopic techniques (Chapter 17), a systematic application of new methods, including micro tomographic x-ray analysis of whole rock samples, is now becoming routinely possible. Contributions in technology. Finally, there are implications beyond the geosciences. Mineralogy has historically has led many to conceptual and technical developments used in other fields, including metallurgy and materials science, and the new area of ultrahigh pressure mineralogy continues this tradition. As pointed out in Chapter 1, many highpressure techniques have their origins in geoscience laboratories, and in many respects, geoscience leads development of high-pressure techniques in physics, chemistry, and materials science. New developments include the application of synthetic diamond for new classes of 'large-volume' high-pressure cells. Interestingly, information on diamond stability, including its metastable growth, feeds back directly on efforts to grow large diamonds for the next generation of such high-pressure devices (Chapter 1). Microanalytical techniques, such as micro-spectroscopy and x-ray diffraction, developed for high-pressure research are now used outside of this field of research as well. The study of minerals and mineral analogs under pressure is leading to new materials. As in the synthesis of diamond itself, these same scientific approaches promise the development of novel, technological materials.

Description / Table of Contents: The review chapters in this volume were the basis for a short course on sulfate minerals sponsored by the Mineralogical Society of America (MSA) November 11-12, 2000 in Tahoe City, California, prior to the Annual Meeting of MSA, the Geological Society of America, and other associated societies in nearby Reno, Nevada. The conveners of the course (and editors of this volume of Reviews in Mineralogy and Geochemistry), Alpers, John Jambor, and Kirk Nordstrom, also organized related topical sessions at the GSA meeting on sulfate minerals in both hydrothermal and low-temperature environments. Sulfate is an abundant and ubiquitous component of Earth's lithosphere and hydrosphere. Sulfate minerals represent an important component of our mineral economy, the pollution problems in our air and water, the technology for alleviating pollution, and the natural processes that affect the land we utilize. Vast quantities of gypsum are consumed in the manufacture of wallboard, and calcium sulfates are also used in sculpture in the forms of alabaster (gypsum) and papier-mache (bassanite). For centuries, AI-sulfate minerals, or "alums," have been used in the tanning and dyeing industries, and these sulfate minerals have also been a minor source of aluminum metal. Barite is used extensively in the petroleum industry as a weighting agent during drilling, and celestine (also known as "celestite") is a primary source of strontium for the ceramics, metallurgical, glass, and television face-plate industries. Jarosite is a major waste product of the hydrometallurgical processing of zinc ores and is used in agriculture to reduce alkalinity in soils. At many mining sites, the extraction and processing of coal or metal-sulfide ores (largely for gold, silver, copper, lead, and zinc) produce waste materials that generate acid-sulfate waters rich in heavy metals, commonly leading to contamination of water and sediment. Concentrated waters associated with mine wastes may precipitate a variety of metal-sulfate minerals upon evaporation, oxidation, or neutralization. Some of these sulfate minerals are soluble and store metals and acidity only temporarily, whereas others are insoluble and improve water quality by removing metals from the water column. There is considerable scientific interest in the mineralogy and geochemistry of sulfate minerals in both high-temperature (igneous and hydrothermal) and low-temperature (weathering and evaporite) environments. The physical scale of processes affected by aqueous sulfate and associated minerals spans from submicroscopic reactions at mineral-water interfaces to global issues of oceanic cycling and mass balance, and even to extraterrestrial applications in the exploration of other planets and their satellites. In mineral exploration, minerals of the alunite-jarosite supergroup are recognized as key components of the advanced argillic (acid-sulfate) hydrothermal alteration assemblage, and supergene sulfate minerals can be useful guides to primary sulfide deposits. The role of soluble sulfate minerals formed from acid mine drainage (and its natural equivalent, acid rock drainage) in the storage and release of potentially toxic metals associated with wet-dry climatic cycles (on annual or other time scales) is increasingly appreciated in environmental studies of mineral deposits and of waste materials from mining and mineral processing. This volume compiles and synthesizes current information on sulfate minerals from a variety of perspectives, including crystallography, geochemical properties, geological environments of formation, thermodynamic stability relations, kinetics of formation and dissolution, and environmental aspects. The first two chapters cover crystallography (Chapter 1) and spectroscopy (Chapter 2). Environments with alkali and alkaline earth sulfates are described in the next three chapters, on evaporites (Chapter 3), barite-celestine deposits (Chapter 4), and the kinetics of precipitation and dissolution of gypsum, barite, and celestine (Chapter 5). Acidic environments are the theme for the next four chapters, which cover soluble metal salts from sulfide oxidation (Chapter 6), iron and aluminum hydroxysulfates (Chapter 7), jarosites in hydrometallugy (Chapter 8), and alunite-jarosite crystallography, thermodynamics, and geochronology (Chapter 9). The next two chapters discuss thermodynamic modeling of sulfate systems from the perspectives of predicting sulfate-mineral solubilities in waters covering a wide range in composition and concentration (Chapter 10) and predicting interactions between sulfate solid solutions and aqueous solutions (Chapter 11). The concluding chapter on stable-isotope systematics (Chapter 12) discusses the utility of sulfate minerals in understanding the geological and geochemical processes in both high- and low-temperature environments, and in unraveling the past evolution of natural systems through paleoclimate studies.

Description / Table of Contents: The review chapters in this volume were the basis for a short course on molecular modeling theory jointly sponsored by the Geochemical Society (GS) and the Mineralogical Society of America (MSA) May 18-20, 2001 in Roanoke, Virginia which was held prior to the 2001 Goldschmidt Conference in nearby Hot Springs, Virginia. Dr. William C. Luth has had a long and distinguished career in research, education and in the government. He was a leader in experimental petrology and in training graduate students at Stanford University. His efforts at Sandia National Laboratory and at the Department of Energy's headquarters resulted in the initiation and long-term support of many of the cutting edge research projects whose results form the foundations of these short courses. Bill's broad interest in understanding fundamental geochemical processes and their applications to national problems is a continuous thread through both his university and government career. He retired in 1996, but his efforts to foster excellent basic research, and to promote the development of advanced analytical capabilities gave a unique focus to the basic research portfolio in Geosciences at the Department of Energy. He has been, and continues to be, a friend and mentor to many of us. It is appropriate to celebrate his career in education and government service with this series of courses in cutting-edge geochemistry that have particular focus on Department of Energy-related science, at a time when he can still enjoy the recognition of his contributions. Molecular modeling methods have become important tools in many areas of geochemical and mineralogical research. Theoretical methods describing atomistic and molecular-based processes are now commonplace in the geosciences literature and have helped in the interpretation of numerous experimental, spectroscopic, and field observations. Dramatic increases in computer power-involving personal computers, workstations, and massively parallel supercomputers-have helped to increase our knowledge of the fundamental processes in geochemistry and mineralogy. All researchers can now have access to the basic computer hardware and molecular modeling codes needed to evaluate these processes. The purpose of this volume of Reviews in Mineralogy and Geochemistry is to provide the student and professional with a general introduction to molecular modeling methods and a review of various applications of the theory to problems in the geosciences. Molecular mechanics methods that are reviewed include energy minimization, lattice dynamics, Monte Carlo methods, and molecular dynamics. Important concepts of quantum mechanics and electronic structure calculations, including both molecular orbital and density functional theories, are also presented. Applications cover a broad range of mineralogy and geochemistry topics-from atmospheric reactions to fluid-rock interactions to properties of mantle and core phases. Emphasis is placed on the comparison of molecular simulations with experimental data and the synergy that can be generated by using both approaches in tandem. We hope the content of this review volume will help the interested reader to quickly develop an appreciation for the fundamental theories behind the molecular modeling tools and to become aware of the limits in applying these state-of-the-art methods to solve geosciences problems.

Description / Table of Contents: The first half-century of X-ray crystallography, beginning with the elucidation of the sodium chloride structure in 1914, was devoted principally to the determination of increasingly complex atomic topologies at ambient conditions. The pioneering work of the Braggs, Pauling, Wyckoff, Zachariasen and many other investigators revealed the structural details and underlying crystal chemical principles for most rock-forming minerals (see, for example, Crystallography in North America, edited by D. McLachlan and J. P. Glusker, NY, American Crystallographic Association, 1983). These studies laid the crystallographic foundation for modem mineralogy. The past three decades have seen a dramatic expansion of this traditional crystallographic role to the study of the relatively subtle variations of crystal structure as a function of temperature, pressure, or composition. Special sessions on "High temperature crystal chemistry" were first held at the Spring Meeting of the American Geophysical Union (April 19, 1972) and the Ninth International Congress of Crystallography (August 30, 1972). The Mineralogical Society of America subsequently published a special 11-paper section of American Mineralogist entitled "High Temperature Crystal Chemistry," which appeared as Volume 58, Numbers 5 and 6, Part I in July-August, 1973. The first complete three-dimensional structure refinements of minerals at high pressure were completed in the same year on calcite (Merrill and Bassett, Acta Crystallographica B31, 343-349, 1975) and on gillespite (Hazen and Burnham, American Mineralogist 59, 1166-1176, 1974). Rapid advances in the field of non-ambient crystallography prompted Hazen and Finger to prepare the monograph Comparative Crystal Chemistry: Temperature, Pressure, Composition and the Variation of Crystal Structure (New York: Wiley, 1982). At the time, only about 50 publications documenting the three-dimensional variation of crystal structures at high temperature or pressure had been published, though general crystal chemical trends were beginning to emerge. That work, though increasingly out of date, remained in print until recently as the only comprehensive overview of experimental techniques, data analysis, and results for this crystallographic sub-discipline. This Reviews in Mineralogy and Geochemistry volume was conceived as an updated version of Comparative Crystal Chemistry. A preliminary chapter outline was drafted at the Fall 1998 American Geophysical Union meeting in San Francisco by Ross Angel, Robert Downs, Larry Finger, Robert Hazen, Charles Prewitt and Nancy Ross. In a sense, this volume was seen as a "changing of the guard" in the study of crystal structures at high temperature and pressure. Larry Finger retired from the Geophysical Laboratory in July, 1999, at which time Robert Hazen had shifted his research focus to mineral-mediated organic synthesis. Many other scientists, including most of the authors in this volume, are now advancing the field by expanding the available range of temperature and pressure, increasing the precision and accuracy of structural refinements at non-ambient conditions, and studying ever more complex structures. The principal objective of this volume is to serve as a comprehensive introduction to the field of high-temperature and high-pressure crystal chemistry, both as a guide to the dramatically improved techniques and as a summary of the voluminous crystal chemical literature on minerals at high temperature and pressure. The book is largely tutorial in style and presentation, though a basic knowledge of X-ray crystallographic techniques and crystal chemical principles is assumed. The book is divided into three parts. Part I introduces crystal chemical considerations of special relevance to non-ambient crystallographic studies. Chapter 1 treats systematic trends in the variation of structural parameters, including bond distances, cation coordination, and order-disorder with temperature and pressure, while Chapter 2 considers P-V-T equation-of-state formulations relevant to x-ray structure data. Chapter 3 reviews the variation of thermal displacement parameters with temperature and pressure. Chapter 4 describes a method for producing revealing movies of structural variations with pressure, temperature or composition, and features a series of "flip-book" animations. These animations and other structural movies are also available as a supplement to this volume on the Mineralogical Society of America web site at RiMG041 Programs. Part II reviews the temperature- and pressure-variation of structures in major mineral groups. Chapter 5 presents crystal chemical systematics of high-pressure silicate structures with six-coordinated silicon. Subsequent chapters highlight temperature- and pressure variations of dense oxides (Chapter 6), orthosilicates (Chapter 7), pyroxenes and other chain silicates (Chapter 8), framework and other rigid-mode structures (Chapter 9), and carbonates (Chapter 10). Finally, the variation of hydrous phases and hydrogen bonding are reviewed in Chapter 11, while molecular solids are summarized in Chapter 12. Part III presents experimental techniques for high-temperature and high-pressure studies of single crystals (Chapters 13 and 14, respectively) and polycrystalline samples (Chapter 15). Special considerations relating to diffractometry on samples at non-ambient conditions are treated in Chapter 16. Tables in these chapters list sources for relevant hardware, including commercially available furnaces and diamond-anvil cells. Crystallographic software packages, including diffractometer operating systems, have been placed on the Mineralogical Society web site for this volume. This volume is not exhaustive and opportunities exist for additional publications that review and summarize research on other mineral groups. A significant literature on the high-temperature and high-pressure structural variation of sulfides, for example, is not covered here. Also missing from this compilation are references to a variety of studies of halides, layered oxide superconductors, metal alloys, and a number of unusual silicate structures.

Description / Table of Contents: An interdisciplinary collection of papers related to long-term landscape development, integrating landscape and tectonic processes. The presentations demonstrate that studies of present-day processes can be successfully placed within an evolutionary framework and geological setting, the necessity for which increases as appreciation of the antiquity of many landscapes grows. Coverage includes: British Isles, NW Europe, Mediterranean Basin, Middle East, Himalaya, Andes and Antarctica. The papers highlight the significance of recent advances in analytical technology for improving interpretation of both geologically ‘ancient’ and ‘young’ landscapes. It is hoped that, by demonstrating the benefits of interdisciplinary discourse, a widening of interest in landscape studies will be encouraged.

Description / Table of Contents: The evolution of oceanic plates is very well described by plate tectonic theory, but the study of continental tectonics is more complicated. Continental plates have a different rheology, a greater mean age, a higher heat productivity, and are more heterogeneous in composition. An understanding of continental tectonics requires, therefore, that these effects upon rigid plate behaviour be taken into account. This book brings together a series of papers which explore various aspects of the deformation of continental lithosphere, covering different tectonic settings from the Palaeozoic to the present day.These include the processes of terrane accretion and juxtaposition, the exhumation of high-pressure terrains, and mechanisms of crustal extension and rifting. The book will be of general interest to a broad audience of earth scientists concerned with global tectonics, continental growth processes, and the deformation of the continents during collision, exhumation and extension.

Description / Table of Contents: Conventional studies of oceanic structure and evolution are inevitably hampered by the difficulties with sampling the crust in the third dimension. Subsurface studies with deep seismic techniques provide some measure of understanding below the seafloor. Ophiolite studies, however, can provide a vast body of knowledge with regard to the deeper structure and crustal compositions, which is unattainable in the deep sea. In turn, many of the recent regional and detailed structures identified at mid-ocean spreading systems such as ridge segmentation patterns and ridge axis discontinuities, now form a significant contribution to recent studies of ophiolite complexes. The book will be of interest to academics from undergraduates upwards and also to industrial researchers concerned with metal sulphide and platinum group element deposits. Cover illustration: Deep-tow sidescan sonograph of the axial floor of the Mid-Atlantic Ridge around 24°N. Data were recorded using the IOSDL Towed Ocean Bottom Instrument. View is 6×8 km in a water depth of around 3500 m. Cratered seamounts, freshly mounded pillow constructs and linear fault scarps are clearly imaged. These currently active ridge processes compare directly with their ancient analogues discussed in this publication.

Description / Table of Contents: During the 1980s the increasing availability of seismic reflection data prompted an upsurge of interest in extensional tectonics, early work concentrating on ‘listric’ thrust-belt type models and the concepts of section balancing. However, earthquake seismology and detailed fault studies have shown recently that faults involved in crustal extension may be essentially planar. This volume concerns the geological setting and interpretation of both listric and planar normal faults. Normal faults are of particular importance in UK hydrocarbon exploration as they are directly or indirectly responsible for the majority of the pre-Tertiary oil and gas accumulations in the North Sea. As the economic size of fields reduces, the modern geologist will require an improved understanding of the origins, geometry and sealing capabilities of these faults. The volume is divided into four sections, dealing with: the geometry and kinematics of large-scale, crustal-stretching faults which typically delimit major hydrocarbon accumulations; case studies ranging from the small-scale fractures associated with the movement of salt to the large-scale intra-plate kinematics of whole fault arrays; studies of detailed displacement patterns shown by individual faults and small fault arrays; and modelling studies of normal fault geometry. The editors believe that this volume will clarify the circumstances in which the diverse models of normal fault geometry might be applicable and thus provide a useful source of reference for both industry- and academia-based research workers. Another volume on extensional tectonics? Yes, but not only is this one very nicely put together, it is also very timely … The editors have wisely placed the emphasis on observations and data … Roberts et al. deserve a great deal of credit for the very high standard of presentation. Most of the contributions contain sensible stuff that is clearly written. Illustrations are excellent … and there are hardly any typos … Ican thoroughly recommend this book to both libraries and individuals.

Description / Table of Contents: Phase transformations occur in most types of materials, including ceramics, metals, polymers, diverse organic and inorganic compounds, minerals, and even crystalline viruses. They have been studied in almost all branches of science, but particularly in physics, chemistry, engineering, materials science and earth sciences. In some cases the objective has been to produce materials in which phase transformations are suppressed, to preserve the structural integrity of some engineering product, for example, while in other cases the objective is to maximise the effects of a transformation, so as to enhance properties such as superconductivity, for example. A long tradition of studying transformation processes in minerals has evolved from the need to understand the physical and thermodynamic properties of minerals in the bulk earth and in the natural environment at its surface. The processes of interest have included magnetism, ferroelasticity, ferroelectricity, atomic ordering, radiation damage, polymorphism, amorphisation and many others-in fact there are very few minerals which show no influence of transformation processes in the critical range of pressures and temperatures relevant to the earth. As in all other areas of science, an intense effort has been made to tum qualitative understanding into quantitative description and prediction via the simultaneous development of theory, experiments and simulations. In the last few years rather fast progress has been made in this context, largely through an interdisciplinary effort, and it seemed to us to be timely to produce a review volume for the benefit of the wider scientific community which summarises the current state of the art. The selection of transformation processes covered here is by no means comprehensive, but represents a coherent view of some of the most important processes which occur specifically in minerals.

Description / Table of Contents: In October 1975 a Short Course on Feldspar Mineralogy was held at the Hotel Utah, Salt Lake City, in conjunction with the annual meetings of the Mineralogical Society of America. Richard A. Yund, David B. Stewart, Joseph V. Smith and Paul R. Ribbe presented workshops on x-ray single-crystal and powder diffraction methods and electron optical techniques as applied to the study of feldspars and presented eight lectures, the substance of which became the nine chapters of the first edition of Feldspar Mineralogy. That book was published by the Mineralogical Society as the second volume of its series entitled Short Course Notes. In 1980 the MSA renamed the series Reviews in Mineralogy to more accurately reflect the scope and contents of the volumes, some of which -- including Volume 5 (1st and 2nd editions), this volume and a forthcoming one on fluid inclusions --were written without presentation at a short course. It will be noted by readers experienced with feldspars that there are many new ideas appearing in Chapters 3, 4 and 5 that have neither received scrutiny by review (other than ourselves) nor survived practical tests of time in the research community. There is some danger in this, but the editor decided the greater risk was to produce a review volume soon to be outdated. Inevitably, given the different goals of individual authors in their assigned topics, some repetition of material has occurred, although usually with quite different emphases. Chapters 1, 2, 9 and 10, in which plagioclase structures and diffraction patterns and their Al,Si distributions, phase equilibria and exsolution textures are featured, are notable in this regard. The editor has attempted to cross-reference these and as many other subjects throughout the volume as feasible. This is a luxury not afforded in other books of this series produced with a short course deadline, and it, together with the detailed Table of Contents, compensates to some degree for the lack of an index. Throughout this book repeated references are made to Smith (1974a,b); these are Volumes 1 and 2 of Feldspar Minerals, an encyclopedic work written by Joseph V. Smith and published by Springer-Verlag. We are particularly indebted to Drs. Konrad Springer and H. Wiebking for permission to reproduce many figures free of charge. The editor (and hopefully this volume) benefitted greatly from numerous stimulating discussions with David B. Stewart, some of which reached a high pitch, none of which came to blows, and several of which produced some palpable scientific progress. Stewart read and criticized many of the chapters. The authors are grateful to numerous individual scientists for figures, for data in advance of publication, and for encouragement and correction.