ALBERT

Notes: Based on the least squares error criterion, a class of finite element is formulated for the numerical analysis of steady state viscous boundary layer flow problems. The method is essentially a discrete element-wise minimization of square and weighted residuals which arise from the attempts in approximately satisfying boundary layer equations. An iterative linearization scheme is developed to circumvent the mathematical difficulties posed by the non-linear boundary layer equations. It results in a process of successive least squares minimizations of residual errors arising from satisfying a set of linear differential equations. A mathematical justification for the method is presented. A major feature of the method lies in the linearization approach which renders non-linear differential equations amenable to linear least squares finite element analysis. Another important feature rests on the proposed finite element formulation which preserves the symmetric nature of finite element matrix equations through the use of the least squares error criterion. Numerical examples of viscous flow along a flat plate are presented to demonstrate the applicability of the method as well as to illuminate discussions on the theoretical aspects of the method.

Notes: This article presents an efficient numerical algorithm a complete listing of the associated computer program, developed for the eigenproblem solution of discrete damped structures, including spinning ones. The numerically stable procedure is based on a combined Sturm sequence and inverse iteration technique, which fully exploits the banded form of the relevant matrices and proves to be most substantially economical when compared to similar existing softwares. Numerical results are presented for representative structures, solved by the present computer program written in FORTRAN V for the JPL UNIVAC 1108 computer.

Notes: The paper shows a procedure for estimating the shape parameter of a Gamma distribution from a sample. This procedure uses a rapidly converging iteration to solve the maximum-likelihood equation and suggests a simple formula for determing the starting value.

Notes: Three variational statements for the slow time-independent flow of a Navier-Poisson fluid are derived. All of these statements are suitable as the bases of finite elements. The first statement is applied successfully to several flow situations.

Notes: The application of the static condensation method is discussed in general. The technique is presented as an extension of the Gauss elimination algorithm. An efficient FORTRAN subroutine is given which simultaneously reduces both the stiffness matrix and the stress-displacement transformation matrix.

Notes: To obtain meshes of reasonable form there have to be made some restrictions in the application of automatic mesh generation schemes using ‘isoparametric’ co-ordinates. In this present paper it will be shown that such restrictions exist for plane meshes. The results figured here are also valid for three-dimensional meshes.

Notes: A structural optimization problem is considered in which the design requirements include restrictions on the strength, stability, frequency and flutter characteristics of the structure. One of the central concerns of this phase of the work has been to overcome the problems inherent in analysing the dynamic and aeroelastic behaviour of structures with many degrees of freedom. The multiweb delta wing structure under supersonic flight conditions is the model upon which this exploratory study is based. The finite element idealization, with three different kinds of elements, is used to model the wing structure. The constant stress triangular plate elements, the rectangular shear panels and the pin-jointed bar elements are used to represent, respectively, the cover skins, webs and stringers of the wing structure. The design problem is formulated as a minimum weight optimization problem and is solved by using non-linear programming techniques. Computationally efficient schemes are developed for the necessary derivatives of the behaviour constraints. Numerical examples are presented to illustrate the feasibility and the computational effectiveness of the method.

Notes: The fitting of a function y =\documentclass{article}\pagestyle{empty}\begin{document}$ \sum\nolimits_{i = 1}^n {A_i {\rm{e}}^{\lambda ix}} $\end{document} to experimental data is considered. Integral equations are developed which have the functions \documentclass{article}\pagestyle{empty}\begin{document}$ \sum\nolimits_{i = 1}^n {A_i {\rm{e}}^{\lambda ix}} $\end{document} as their solutions for n = 1, 2, 3, These integral equations are used to find the frequencies λi. Examples are worked out to illustrate the method. The method is shown to be capable of extension to other functions.

Notes: It is shown how the stress field due to any prescribed continuous distribution of dislocation dipoles can be determined. This technique then forms the basis of a general method of solution of elasto-plastic material problems. The presentation is limited to situations which conform to either plane stress or strain conditions. Some results are obtained for relatively simple geometrical and loading configurations and compared with classical plasticity solutions. Finally, the method is applied to the problem of a circular hole in a finite strip under tension.

Notes: In a two-dimensional space of points on an equilateral triangle grid, a single difference equation holding at each node is found from the finite element formulation of the wave equation for all published polynomial orders of the functional expansion. Assuming homogeneous boundary conditions on any equilateral triangle whose edges and vertices pass through the grid points, the eigensolutions of the difference equation are found exactly and thus provide an excellent test problem for the programmer or engineer. The advantage of the present method over other formulations is that the number of linear operations required to produce the difference equation is minimal.

Notes: A finite element weighted residual process has been used to solve transient linear and non-linear two-dimensional heat conduction problems. Rectangular prisms in a space-time domain were used as the finite elements. The weighting function was equal to the shape function defining the dependent variable approximation. The results are compared in tables with analytical, as well as other numerical data. The finite element method compared favourably with these results. It was found to be stable, convergent to the exact solution, easily programmed, and computationally fast. Finally, the method does not require constant parameters over the entire solution domain.

Notes: This paper deals with solving the two-dimensional variational problem for plate bending by the Ritz method using bicubic fundamental splines. It is a piecewise polynomial method, very adaptable to practical numerical computation, and can be an alternative for the well-known Finite Element Method1.

Notes: Edge displacement of assumed-stress hybrid plate elements are commonly chosen as either linear, quadratic or cubic functions of the edge co-ordinate. The present paper examines the effect of this choice on the acceptability, accuracy, and possible zero energy modes of elements based on a linear stress field. It is concluded that triangular elements may be preferable to quadrilaterals, and that linear edge displacements are not desirable.

Notes: Two methods are presented for the automatic selection of a cycle basis leading to a sparse flexibility matrix for the analysis of rigid-jointed skeletal structures.The first method having a local approach forms a maximal set of admissible minimal cycles, while the second having a global approach constructs admissible minimal cycles on the ordered chords of a shortest route tree. A cycle ordering algorithm is also given to reduce the band width of the corresponding flexibility matrix.

Notes: The steady state flow problem known in magnetohydrodynamics as Hartmann's flow is converted into variational formulation and is given an approximate solution by means of the spline blended interpolation technique. The equations of motion consist of two coupled potential flow problems with homogeneous boundary conditions. The spline blended interpolation method is reduced here, because of the shape of the domain, to a cartesian product of cardinal splines with trigonometric or ordinary polynomials. ‘Exact’ boundary conditions are presented by the blending technique. The numerical results indicate that high accuracy is possible with relatively few unknowns.

Notes: The development of a generalized quadrilateral finite element that includes a singular point at a corner node is presented. Inter-element conformability is maintained so that monotone convergence is preserved. The global-local concept of finite elements is used to formulate the complete set of equations. Examples of crack tip singularities are given.

Notes: The paper presents a generally applicable approach to transient heat conduction problems with non-linear physical properties and boundary conditions. An unconditionally stable central algorithm is used which does not require iteration.Several examples involving phase change (where latent heat effects are incorporated as heat capacity variations) and non-linear radiation boundary conditions are given which show very good accuracy.Simple triangular elements are used throughout but the formulation is generally valid and not restricted to any single type of element.

Notes: The visco-plastic model of material behaviour is of much practical interest in its own right and initial strain techniques for its solution have been developed and proved efficient. More important however is the fact that the visco-plastic model can be used to generate plasticity solutions in a simple manner when stationary conditions are reached and, at the other extreme, can reproduce standard creep phenomena. Used in this sense it allows the treatment of non-associated plasticity and strain softening situations which present difficulties in conventional plasticity approaches. A standard programme thus allows the treatment of a wide range of materially non-linear problems.The paper discusses various applications of the new general formulation and introduces certain numerical information on solution stability.

Notes: A finite beam-column element computer program for the structural failure analysis of proportionally loaded skeletal plane frames is described. The program, which is based on an iterative stiffness approach, provides for non-linear elastic or plastic-non-linear elastic behaviour. Particular attention is given to the incorporation into the analysis of geometrical imperfections, return of elasticity at plastic hinges and negative frame stiffness. The effect of lack-of-fit displacements on the load-deflection path and failure load of frames that carry relatively large axial loads is described in general terms. The theory is developed further through the application of the computer program to two examples which show the necessity for the allowing for the effect of imperfections when designing axially loaded redundant frames.

Notes: When large, progressive, deformation occurs under plastic or visco-plastic conditions, elastic deformations are negligible and the material flows in a viscous manner. The flow is non-Newtonian and the viscosity is a function of the current strain rates. An effective numerical treatment of such non-Newtonian flow by the finite element method is indicated here and is illustrated by examples of an extrusion process for which approximate slip line solutions are known.The methodology is extended to the solution of transient, quasi-static situations and coupling with thermodynamic equations is discussed.A stream function formulation of the problem is used.

Notes: This paper deals with a finite element formulation and solution of the boundary value problem of a concentrated force acting on a semi-infinite micropolar solid. A stiffness matrix is derived for a flat micropolar rectangular element in a plane state and use is made of this element to solve the case of the semi-infinite micropolar solid both in a state of plane stress and plane strain. An immediate application of the plane strain case is the important practical problem of a long line load acting on a soil mass which may be simulated as a micropolar body.

Notes: One of the first finite elements presented was that by Turner et al.1 Pian2 presented a hybrid plane stress element and Wilson et al.3 presented a non-conforming displacement element. It is shown that the three resulting stiffness matrices are identical.

Notes: The concepts and potential advantages of local and global least squares smoothing of discontinuous finite element functions are introduced.The relationship between local smoothing and the ‘reduced’ integration' technique is established.Examples are presented to illustrate the application of the two smoothing techniques to the finite element stresses from several structural analysis problems.The paper concludes with some practical recommendations for discontinuous finite element function smoothing.

Notes: This paper presents a method of solving systems of simultaneous non-linear partial differential equations using the method of lines and the method of quasilinearization-superposition in combination. The advantages of the method over those methods more generally used are discussed and an example of the application of the method to the two-dimensional momentum and energy equations considering temperature-dependent and/or shear-rate dependent viscosity is given.

Notes: Basic equations are derived for a comprehensive computer analysis for an equivalent lumped parameter system which simulates a pre-twisted, rotating or non-rotating. Timoshenko beam in coupled bending-bending-torsion vibrations. These equations enable one to develop straightforwardly digital computer programs for studying vibration problems related to compressor or turbine blades in turbomachinery as well as in other structural dynamics applications. The validity of the lumped parameter approach is established through a free vibration study. Good agreement between the present computer results and those obtained theoretically or experimentally by other investigators is demonstrated. In particular, it is found that the natural frequencies obtained in the free vibration study for all beams examined converge from below the exact values at a convergence rate of N-4, where N is the total number of the lumped parameters used in the computer simulation. The rapid rate of convergence shows that the mathematical model used in deriving the basic equations can adequately represent the type of beams under consideration. The known convergence rate also provides an estimate on the accuracy of the computer results, and a means to improve these results by extrapolation.

Notes: The method of ‘least squares’, which falls under the category of weighted residual processes, is applied as a time-stepping algorithm to one-dimensional transient problems including the heat conduction equation, diffusion-convection equation, and a non-linear unsaturated flow equation. Comparison is made with other time-stepping algorithms, and the least squares method is seen to offer definite advantages.

Notes: A program is demonstrated which apart from linear finite elements in time also includes elements with shape functions of the second and third degree. The algorithm for discretization in the time dimension is described and, using the example of a parabolic time element, the coefficients required to form the global system are given. By various test examples the efficiency of the process is examined by comparison with the customary difference method. Generally, with finite elements in time, the solution has better stability. Comparing the time required for calculation with the accuracy of the solution it would appear that in examining problems where boundary conditions are constant in time, higher order time elements are no improvement over the linear time element. However, for the purpose of reproducing periodic processes, higher order time elements offer an advantage in that one is not limited to linear variations of the boundary conditions within the element. Thus, for example, the temperature curve for parabolic variation of the surface temperature can be reproduced with close approximation by two time elements per period and a shape function of the third degree.

Notes: A unified procedure is presented for the automatic generation of the coefficient matrix of finite difference equations. The method is applicable to the solution of both initial and boundary value problems, to any order of difference equation, and may be used with any arbitrary initial or boundary conditions.

Notes: A method of determining the torsional stiffness of a wide range of structural sections, both homogeneous and composite, is presented. Prandtl's stress function along the boundaries of component sections is approximated by finite Fourier series with coefficients chosen to minimize a functional. An example indicates that the stiffness may be determined to acceptable accuracy by the solution of very few equations.

Notes: The object of this paper is to describe a new algorithm for the semi-automatic triangulation of arbitrary, multiply connected planar domains. The strategy is based upon a modification of a finite element mesh genration algorithm recently developed. 1 The scheme is designed for maximum flexibility and is capable of generating meshes of triangular elements for the decomposition of virtually any multiply connected planar domain. Moreover, the desired density of elements in various regions of the problem domain is specified by the user, thus allowing him to obtain a mesh decomposition appropriate to the physical loading and/or boundary conditions of the particular problem at hand. Several examples are presented to illustrate the applicability of the algorithm. An extension of the algorithm to the triangulation of shell structures is indicated.

Notes: It is shown how the elasticity equations can be formulated in terms of a general procedure of abstract analysis, called the projective method, for constructing an approximate solution. This allows the many studies of convergence and uniqueness of solutions which have been made in modern mathematics to be applied to the elasticity problem. The abstract formulation also suggests an organizational scheme for generating a computer code. A computer code for hollow or solid cylinders of arbitrary cross section was developed and several numerical examples are presented. The procedure is computationally advantageous for the class of problems under consideration because of the relatively small number of equations that must be solved as compared to the finite element method. The results presented demonstrate the accuracy of the method.

Notes: Extraocular muscles from representative species of vertebrate groups ranging from amphibians to the higher mammals were examined in serial histological sections for the presence of muscle spindles. These observations and data from the literature indicate that extraocular muscles of the pig, calf, sheep and other even-toed ungulates are richly supplied with well-defined spindles having a generous complement of intrafusal fibers distinguishable as nuclear bag and chain fibers. Spindles in human eye muscles are also numerous. In macaque and chimpanzee muscles a few poorly developed spindles were present in some, but not all, muscles. No encapsulated receptors were found in 20 other mammalian and submammalian species examined in this study. When present, spindles tended to be located in the zone of small muscle fibers found along the orbital surface of the muscle. Rectus and oblique muscles in all species had such a zone, so that its existence did not determine whether spindles would occur.

Notes: The long antennal flagellum of Neoconocephalus ensiger is covered with many sharp-tipped hairs that appear to be non-innervated; thick-walled chemoreceptors, that may also have a tactile function; thin-walled chemoreceptors of several kinds and coeloconic chemoreceptors. All of the chemoreceptors are innervated by small groups of neurons. The first flagellar subsegment is unusual in that it bears a small protuberance on its latero-ventral surface. This marks the site of the attachment, internally, of a scoloparium containing about eleven scolopales in which the dendrites of some 23 sensory neurons terminate. The most distal subsegment lacks the scoloparium reported earlier for the grasshopper. No conspicuous difference between the antennae of males and of females was found.

Notes: The antennae of two species of thrips, Bagnalliella yuccae (Hinds) and Frankliniella tritici (Fitch), have been examined with the light and electron microscopes. The antennal flagellum of both species is provided with tactile hairs, thick-walled chemoreceptors and thin-walled chemoreceptors. In addition, B. yuccae, but not F. tritici, has a single coeloconic chemoreceptor on the dorsal surface of the pedicel. Observations were made on the fluids in the lumen of the antennae of E. yuccae in the living insect. The movement of the fluids probably has an important physiological significance.

Notes: Gonadotrophic cells in the pars distalis of Anolis carolinensis often contain juxtanuclear concentrations of filaments with diameters intermediate in size (approximately 100 Å) between microtubules and microfilaments. Their size and their substructure, which gives them a tubular appearance when they are displayed in cross-section, appear to place these filaments in the “intermediate filament” category (Ishikawa et al., '68). In their juxtanuclear position in the intact animal, the intermediate filaments are collected in randomly-oriented tangles. In castrated specimens of Anolis, gonadotrophs degranulate and elongate. During this elongation, increased numbers of microtubules appear in orientation parallel to the long axis of the cell, and the 100 Å filaments reassemble in rod-like masses oriented parallel to the microtubules. This apparent distributional interaction may facilitate the elongation of the cell. Intimate physical associations between the intermediate filaments and secretory granules suggest that the filaments may act in the movement of the granules during the processes of degranulation and secretion.

Notes: The cervicothoracic muscles of nymphal and adult Euborellia annulipes (Lucas) are described, the former for the first time. In the adult, eight new muscles are identified, while the nymphs possess a further seven muscles that disappear at maturation or before. Otherwise the same muscles occur in nymphs as in adults, though some nymphal muscles are less clearly separated from one another than their adult homologs. The attachment sites of certain muscles show a number of slight differences between nymphs and adults. The work emphasizes the necessity of taking the immature musculature into account in assessing the muscular pattern represented in an insect order.

Notes: The morphological features of the hemocytes of the crustacean Ligia exotica are similar to hemocytes of insects and millipedes. Jones system of hemocyte classification is extended to crustacean hemocytes. As in insects, seven classes of hemocytes, identified as prohemocytes, plasmatocytes, granular hemocytes, cystocytes, oenocytoids, spherule cells and adipohemocytes, occur. The prohemocytes can be subdivided into five categories that probably represent the precursor of major cell types. The structural and chemical features of other major cell classes are distinct and support the concept of Jones ('62) that these types might have different lineages and might not be capable of transforming into one another. Some of the prohemocytes, plasmatocytes and granular hemocytes are amoeboid. Cystocytes do not bring about any visible plasma coagulation similar to their counterpart in millipedes. Oneocytoids and adipohemocytes are rare. Plasmatocytes, cystocytes and oenocytoids occur in conglomerates, the significance of which is discussed. The cell types are compared with those of the hemocytes of other crustaceans. It is suggested that the nomenclature based on morphological characters is more suited for crustacean hemocytes than a nomenclature based on behavioural and physiological characters.

Notes: Some of the cytological characteristics of the hemocytes of the scorpion, Palamnaeus swammerdami, were studied. The morphological features of the arachnid hemocytes were observed to be similar to those of hemocytes of insects, millipedes and isopods. Jones' system of hemocyte classification was extended to the arachnid hemocytes. The six classes of hemocytes indentified in the scorpion correspond to prohemocytes, plasmatocytes, granular hemoocytes, cystocytes, spherule cells and adipohemocytes of insects. A cell type comparable to oenocytoids of insects and crustaceans is absent. The prohemocytes can be subdivided into four categories that probably represent the precursors of the major cell types. The cytological characteristics of the major cell classes and the occurrence of the miniatures of some of these major cell types support the concept of Jones (62) that these cell types might have different cell lineages and might not be capable of transforming into one another. Some of the prohemocytes, plasmatocytes and granular hemocytes were amoeboid. The nature of the granules and the vacuoles of plasmatocytes and granular hemocytes were compared with the granules and vacuoles of corresponding hemocytes of other arthropods. Cystocytes did not bring about any visible coagulation similar to their counterparts in millipedes and crustaceans. Plasmatocytes, granular hemocytes and spherule cells were observed to occur in conglomerates. The cell types noted in the present study were compared with the hemocytes of other arachnids.

Notes: Transmission and scanning electron microscopic studies demonstrate the stimulatory effect of synthetic salmon calcitonin on the fine structure of fibroblasts and on collagen formation in cutaneous wounds experimentally induced in rabbits. Long-term administration of calcitonin enhances fibroblast growth and collagen synthesis. The fibroblasts hypertrophy and exhibit a highly developed rough endoplasmic reticulum (RER), several polyribosomes, large nuclei, hypertrophic Golgi complex, and many dense granules and lysosomes. Mitochondria are elongate and ramify; intracellular as well as extracellular synthesis of collagen increases. Fibrils appear tightly packed, in large heaps or spicula, with a characteristic periodicity and striation.Scanning electron micrographs of topography and relationships with collagen fibers and fibrils and cells surface changes demonstrate an extensive network of fine fibrils between collagen fibers, marked ruffling of cell membranes as well as numerous blebs on the cell surface. The latter are significant in collagen formation and egestion.

Notes: An arbitrary classification scheme is presented for the thirteen distinct types of secretory cells distinguished within the central nervous system of Dermacentor variabilis by several specific and general neurosecretory staining techniques. Comparisons to classic arthropod neurosecretory cell types are made and the histochemical implications of the chromophilic response of various secretory products are discussed. Dermacentor cells of Types I, VII, IX and X may be considered neurosecretory on the basis of intracellular elaboration and discharge of secretory product. Type II, III, IV, V, VI, XI and XII cells are considered as putative neurosecretory cells although secretory products were detected only within the perikarya. The large Type XII cells are also similar to motor neurones reported from other arachnids. Cells of Types VIII and XIII appear to be glial elements. The secretory products of Type XIIIA are distributed within trabecular processes in the subperineurium. These products may play a trophic role or they may have some endocrine function as a form of “gliosecretion”.

Notes: Sperm enter the anterior vas deferens individually in the spider crab male. There they become surrounded by secretion products from the cells of the vas deferens, and are compartmentalized into spermatophores of varying size. The anterior vas deferens can be divided into three regions. The epithelium of the anterior vas deferens varies regionally from low to high columnar. The cytoplasm contains vast arrays of rough endoplasmic reticulum and Golgi complexes but few mitochondria. Intercellular spaces contain septate junctions, gap junctions and vesicles.Once the spermatophores have been formed in the anterior vas deferens, they are moved posteriorly to the middle vas deferens where they are stored and surrounded by seminal fluids. The epithelial cells of the middle vas deferens contain large amounts of rough endoplasmic reticulum and Golgi complexes. Numerous micropinocytotic vesicles appear, forming at the cell surface and within the apical cytoplasm. Their suggested function is the resorption of secretion products of the anterior vas deferens which initiated compartmentalization of the spermatozoa into spermatophores.The posterior vas deferens functions primarily as a storage center for spermatophores until they are released at the time of copulation. Seminal fluid surrounding the spermatophores is produced in this region as well as in the middle vas deferens. The cells of this region contain vast arrays of vesicular rough endoplasmic reticulum and Golgi complexes. The cells are multinucleate. Microtubules are numerous throughout the length of the cells and appear to insert on the plasma membrane.

Notes: Rostral pores are epidermal invaginations which occur on the internarial region of most chelonians. Representatives of all Recent chelonian families and 67 of the 74 extant genera were examined grossly and/or histologically. Pores are absent only in the families Carettochelyidae, Cheloniidae, and Dermochelyidae. The number and microscopic structure of pores vary markedly within and between taxa. Morphological data suggest that rostral pores could function in mechanoreception. The possible origin and evolution of rostral pores are discussed in the context of other chelonian integumentary speializations.

Notes: The termite gut flagellates are of interest because of their unusual motile organelles, their ability to digest cellulose, and their symbiotic relationship with prokaryotes inhabiting the insect gut. This report provides a detailed ultrastructural description of Pyrsonympha from the hind-gut of Reticulitermes flavipes.The motile axostyle is composed of 2,000-4,000 microtubules connected by cross-bridges. At its anterior end, the axostyle is associated with a “primary row” of microtubules which is associated with a fibrous network. The “primary row” is embedded in a large mass of amorphous, electron-dense material occupying the furthest anterior end of the cell. The basal bodies of the eight flagella are also embedded in this presumptive microtubule-organizing center. The flagella are associated with the cell surface throughout their length. Isolation and reactivation of the axostyle has demonstrated that although ATP dependent motility is inherent in the structure of the axostyle, its proper control may be mediated by the attachment of the axostyle to structures at the anterior end of the cell.Pyrsonympha lacks morphologically distinguishable mitochondria and Golgi complexes. The cell surface is covered by unique, previously underscribed, tubular specializations. Symbiotic microorganisms are observed associated with the cell surface and within the cytoplasm.Wood particles are taken up from the gut fluid by large phagocytic vacuoles formed at the posterior end of the cell. Even during the process of breakdown, the wood is always enclosed within the membrane of the phagocytic vacuole.The Pyrsonympha from Reticulitermes flavipes are not attached to the lining of the hind-gut and do not contain an attachment organelle, unlike the Pyrsonympha from other species of Reticulitermes.

Notes: Basicranial anatomy of mammalian carnivores is significant in the determination of carnivore evolution. One of the least understood yet most often studied features of the basicranium is the auditory bulla, a bony capsule enclosing the middle ear. Although previously believed to be formed by a tympanic bone alone, or by tympanic and entotympanic, it is shown here that the carnivore bulla is formed by three and in some cases four ontogenetic elements: tympanic, rostral entotympanic, caudal entotympanic(s). These elements in Carnivora appear to correspond to bulla elements discovered over 50 years ago by Van der Klaauw in representative species of several other orders of mammals.Increased auditory sensitivity appears to have been attained in various carnivore lineages by increase in the volume of the middle ear cavity, principally by hypertrophy of the caudal entotympanic, but also by different yet less common anatomical strategies such as invasion of the mastoid bone by the middle ear space. Five basic types of bulla among living Carnivora can be recognized, based largely on the relationship of the caudal entotympanic to the other bulla elements.Closely associated with the bulla in the auditory region are the median and promontory branches of the internal carotid artery. These branches exhibit a precise relationship to the bulla elements, particularly the rostral entotympanic. The promontory branch is much reduced or completely lacking in all living carnivores. Reduction or loss of the median branch is explained as the result of the development of arterial retia on the anastomotic artery in the orbital region. Reduction of the median branch is particularly characteristic of the aeluroid Carnivora, in which a greater proportion of the cerebral blood supply passes to the brain in the external carotid artery via the anastomotic branch, and is cooled in the orbital region by a countercurrent heat exchange mechanism formed by arterial retia closely associated with venous blood in surrounding sinuses. The arctoid and cynoid Carnivora are characterized by only rudimentary development of retia along the anastomotic artery, and the median branch is much better developed than in the aeluroids. Among arctoids, ursids parallel the aeluroids in the development of a countercurrent mechanism but employ the median branch of the internal carotid rather than the anastomotic branch of the external carotid artery.Bulla structure and nature of the carotid circulation in the auditory region can be determined from fossil Carnivora as well as for living forms. This study attempts to define basicranial anatomical patterns characteristic of living Carnivora which then can be used to trace the evolution of lineages in the fossil record.

Notes: Mature mouse and cat peripheral nerve fibers have been examined in vitro by time-lapse photography. Some Schmidt-Lanterman clefts which were open at the start closed later; other were seen to open and then to close, some of them more than once. The implications of these movements are considered, especially in regard to the question of the passage of materials from the endoneurial connective tissue spaces to the axon.Myelin movements other than those occurring at the Schmidt-Lanterman clefts consisted primarily of the development and frequent regression of indentations of the myelin sheath. A single evagination was seen to develop and then to recede. These myelin movements suggest that previously described invaginations and evaginations of the myelin sheath, including flaps of “redundant myelin”, are not static but rather that they are in a state of movement, forming and regressing at intervals.The possible functional significance of the development and regression of myelin sheath indentations in relationship to axoplasmic flow is discussed.

Notes: The gecko ear was studied in 36 species belonging to 24 genera. This receptor has attained an advanced level of structure and performance in this group of lizards, but there are many variations among species. To a large extent these variations follow subfamily lines as represented in Kluge's system of classification.Brief consideration is given to features of the outer and middle ear, but chief concern is with inner ear structures and their relations to auditory sensitivity as represented by the cochlear potentials.The auditory papilla is segmented, with a dorsal portion whose hair cells have their ciliary tufts attached to a tectorial membrane, and a ventral portion in which these cells form tow assemblages, one with tectorial connections and the other with connections to a line of sallets.The dorsal segment varies greatly in length and in the form of ciliary orientation. In Eublepharinae and most Gekkoninae the ciliary orientation is unidirectional, and the degree of sensitivity relates to the length of this segment. In Diplodactylinae and Sphaerodactylinae the orientation is bidirectional, and this segment functionally hardly differs from the ventral segment.Auditory sensitivity as measured in terms of the cochlear potentials shows close relations with subfamily groupings, except for the Gekkoninae in which considerable diversity is found.The evidence from structural differentiation, along with that derived from the forms of the cochlear potential functions, leads to the suggestion that these ears possess a high degree of pitch discrimination and capability for the analysis of complex sounds.

Notes: The authors describe the spermiogenesis of Polyxenus lagurus, a diplopod, in the male genital ducts and the transformations the spermatozoon successively undergoes in the spermatheca.The spermatozoon in the male genital ducts looks like a little barrel devoid of centriole and of any kind of rudimentary flagellum whatever. The organelles are markedly modified; cross sections present an elongated, flattened nucleus, an X-shaped body running parallel to it on the opposite side and two longitudinal mitochondrial strips interposed between them. The rest of this barrel-shaped spermatozoon is filled with peculiar Golgi formations, the spongy chambers, which open outwards through little vents.In the spermatheca the spermatozoon is quite different: it is shaped like a long ribbon. The basic structure of the spermatozoon is formed by the double folding of part of the cortical layer of the barrel-shaped spermatozoon. On the central part of this endo-skeleton are longitudinally ranged the nucleus and the acrosome flanked on both sides by a thread of mitochondria. Even in this phase the sperm has no flagellum.

Notes: Several secretory and nonsecretory enzymes were localized histochemically in the main venom gland of 13 viperid snakes. All secretory cells show the intracellular oxidative enzymes succinate dehydrogenase and monoamine oxidase. The granular reactions obtained for both enzymes resemble mitochondria in distribution. Distinctive cells with a very high succinate dehydrogenase activity are dispersed among the secretory cells of all species except Atractaspis.Nonspecific acid phosphatase activity is found in the supranuclear region of the secretory cells in species that do not secrete this enzyme and throughout the cytoplasm in snakes that secrete the enzyme. Nonspecific alkaline phosphatase activity occurs in the secretory cells of those snakes whose venom shows this activity. Leucine amino peptidase (aryl amidase) activity is found in the venom and in the secretory cells of all the species.In Vipera palaestinae both the venom and the secretory cells of the main venom gland contain nonspecific esterase, L-amino acid oxidase and phosphodiesterase activities. The localization of phosphodiesterase and L-amino acid oxidase do not show major differences between glands at different intervals from an initial milking.Adenosine-monophosphate phosphatase activity is localized in the supranuclear region of the secretory cells in the glands of Vipera palaestinae and Aspis cerastes. Its activity is found in the venom of Aspis only.

Notes: The three dorsal ocelli of worker honeybees have been studied by light and electron microscopy. Each ocellus has a single flattened spheroidal lens and about 800 elongated retinular cells. Retinular cells are paired and form a two-part plate-like rhabdom between their distal processes. Each rhabdomere comprises parallel microvilli projecting laterally from the apposed retinular cells. Primary receptor cell axons synapse within the ocellus with ocellar nerve fibers of two different calibers. Each ocellus has eight thick fibers ca 10 m̈m in diameter and several thinner ones less than 3 m̈m in diameter. Fine structural evidence suggests that retinular axons end presynaptically on both types of ocellar nerve fibers. Since all retinular cells apparently synapse repeatedly with the thick fibers this involves a convergence of about 100:1. Thick fibers always terminate postsynaptically within the ocellus while thin fibers terminate presynaptically on other thin fibers, thick fibers or retinular axons. Structural evidence for synaptic polarization indicates that retinular cells and thick fibers are afferent, thin fibers efferent. Thus complex processing of the ocellar visual input can occur before the secondary neurons of the three ocelli converge to form the single short ocellar nerve which runs to the posterior forebrain.

Notes: Ampullary receptor organs of African mormyrids consist of a cavity beneath the epidermis. The wall of the cavity contains embedded receptor cells and two types of supporting cells. A canal extends from the cavity to an opening at the surface. The lumen of the canal and the ampulla are filled with a jelly-like material and dense cylinders apparently secreted by two types of supporting cells. Flattened cells of the canal wall are joined by occluding junctions. Synapses between receptor cells and the afferent nerve fiber are characterized by a presynaptic dense body, but presynaptic vesicles were not observed. Degenerating receptor cells are occasionally seen among normal receptor cells in the base of the organ.

Notes: This paper examines the effect of early thymectomy on the subsequent development of lymphoid tissues in the toad, Xenopus laevis. At the time of thymic removal (8 days post-fertilization) all the lymphoid organ anlagen are at a rudimentary state of differentiation and contain few, if any, small lymphocytes. Despite the absence of any thymic tissue all thymectomized animals grew normally.Thymectomized larvae developed relatively normal lymphoid organs. However, lymphoid depletion was apparent in the splenic red pulp and in the pharyngeal ventral cavity bodies. Examination of the lymphoid organs of post-metamorphic Xenopus revealed reduction in spleen size following thymectomy. Lymphoid depletion was evident in the splenic red pulp of many thymectomized toadlets and reduction in proportion of white to red pulp was also noted in a few of these animals. Absence of the thymus had no apparent effect on the histology of the other lymphoid organs examined.

Notes: The biomechanical role of the mammalian clavicle and the functional significance of the aclaviculate condition were investigated. Shoulder movements in rats (Rattus norvegicus) with excised clavicles were compared to those of normal rats by biplanar plate radiography. Shoulder movements during walking of the claviculate American opossum (Didelphis marsupialis), and aclaviculate raccoons (Procyon lotor) and cats (Felis domestica) were compared by biplanar cineradiography.The mammalian clavicle, where present in its complete form, exerts both a “spoke” and a “strut” effect on shoulder movement. By maintaining a fixed distance between the acromion and manubrium, the clavicle ensures that relative movement between these structures is arcuate. Aclaviculate mammals, in contrast, have linear shoulder excursions that are nearly parallel or slightly oblique to the median plane, depending on the conformation of the thorax. Medial collapse of the shoulder in aclaviculate rats demonstrates that the clavicle is under compression, and thus acts as a strut.Reduction or loss of the clavicle, which has occurred independently in numerous mammalian phylogenies, has been regarded as an adaptation for greater shoulder movement and hence increased stride. However, on present evidence clavicular reduction in cursorial mammals appears to be more directly related to a linear excursion of the shoulder joint and a restriction of limb movements to a sagittal plane.

Notes: The tail of Teratoscincus scincus has dorsal scales that have tubercles on their dorsal and ventral surfaces. Sounds are produced when these rub past each other as the excited animal moves its tail. The relative movement of scales is intensified by caudal torsion. The frequencies of the sounds cover a range from 9 to 25 kops and thus, differ from those produced during vocalizations.

Notes: The locomotor function of the caudal muscle cells of ascidian larvae is identical with that of lower vertebrate somatic striated (skeletal) muscle fibers, but other features, including the presence of transverse myomuscular junctions, an active Golgi apparatus, a single nucleus, and partial innervation, are characteristic of vertebrate myocardial cells.Seven stages in the development of the compound ascidian Distaplia occidentalis were selected for an ultrastructural study of caudal myogenesis. A timetable of development and differentiation was obtained from cultures of isolated embryos in vitro.The myoblasts of the neurulating embryo are yolky, undifferentiated cells. They are arranged in two bands between the epidermis and the notochord in the caudal rudiment and are actively engaged in mitosis.Myoblasts of the caudate embryo continue to divide and rearrange themselves into longitudinal rows so that each cell simultaneously adjoins the epidermis and the notochord. The formation of secretory granules by the Golgi apparatus coincides with the onset of proteid-yolk degradation and the accumulation of glycogen in the ground cytoplasm.Randomly oriented networks of thick and thin myofilaments appear in the peripheral sarcoplasm of the muscle cells of the comma embryo. Bridges interconnect the thick and thin myofilaments (actomyosin bridges) and the thick myofilaments (H-bridges), but no banding patterns are evident. The sarcoplasmic reticulum (SR), derived from evaginations of the nuclear envelope, forms intimate associations (peripheral couplings) with the sarcolemma.Precursory Z-lines are interposed between the networks of myofilaments in the vesiculate embryo, and the nascent myofibrils become predominantly oriented parallel to the long axis of the muscle cell.Muscle cells of the papillate embryo contain a single row of cortical myofibrils. Myofibrils, already spanning the length of the cell, grow only in diameter by the apposition of myofilaments. The formation of transverse myomuscular junctions begins at this stage, but the differentiating junctions are frequently oriented obliquely rather than orthogonally to the primary axes of the myofibrils.With the appearance of H-bands and M-lines, a single perforated sheet of sarcoplasmic reticulum is found centered on the Z-line and embracing the I-band. The sheet of SR establishes peripheral couplings with the sarcolemma.In the prehatching tadpole, a second collar of SR, centered on the M-line and extending laterally to the boundaries with the A-bands, is formed. A single perforated sheet surrounds the myofibril but is discontinuous at the side of the myofibril most distant from the sarcolemma. To produce the intricate architecture of the fully differentiated collar in the swimming tadpole (J. Morph., 138: 349, 1972). the free ends of the sheet must elevate from the surface of the myofibril, recurve, and extend peripherally toward the sarcolemma to establish peripheral couplings.Morphological changes in the nucleus, nucleolus, mitochondria, and Golgi bodies are described, as well as changes in the ground cytoplasmic content of yolk, glycogen, and ribosomes.The volume of the differentiating cells, calculated from the mean cellular dimensions, and analyses of cellular shape are presented, along with schematic diagrams of cells in each stage of caudal myogenesis. In an attempt to quantify the differences observed ultrastructurally, calculations of the cytoplasmic volume occupied by the mqjor classes of organelles are included.Comparison is made with published accounts on differentiating vertebrate somatic striated and cardiac muscles.

Notes: Anolis embryos have limb buds at the time eggs are laid and require about 39 days to complete development at 28°C. Rathke's pouch is present at five days, and the subdivisions of the adenohypophysis are differentiated by ten days after oviposition. The cells of the rostral half of the pars distalis (PD) are derived from the anterior face of Rathke's pouch; cells of the caudal half from the posterior face. Lateral lobe cells differentiate on the lateral margins of the developing caudal PD, and knob-like outgrowths of this tissue attach to the walls of the diencephalon to form the pars tuberalis (PT). Subsequently, the cells of the PT lose their connection with the PD and become a pair of flattened oblong plaques. They reach maximal size in midincubation, and are gradually invaded by nervous elements and incorporated into the walls of the hypothalamus. Electron micrographs demonstrate that the embryonic PT is secretory.Ultrastructurally the pars intermedia (PI) and PD are composed of parenchymous secretory cells in a framework of stellate cells. Stellate cells surround the lumen of Rathke's pouch and are connected laterally by complex junctions that exclude the secretory cells from the luminal surface. They extend in sheet-like processes among the secretory cells to the outer margin of the gland where they form a partial sheath within the basal lamina around the secretory tissue. As development proceeds, the lumen becomes subdivided and the resulting reduced lumina are recognizable as the forerunners of the follicles of the adult adenohypophysis.The cells of the PI are differentiated into secretory or stellate cells halfway through incubation. At this time only half of the cells of the PD can be so classified. Four of the five granulated cell types described in the adult are recognizable by mid-incubation; the fifth cell type (prolactin cell) becomes distinguishable within ten days thereafter, and at hatching appears to be actively synthesizing secretory products.

Notes: The hydranth of the gymnoblastic hydroid Syncoryne tenella is invested by a cuticle approximately 530 mμ thick which is continuous with the periderm of the hydrocaulus. The ectodermal cells of the hydranth possess regularly spaced microvilli orientated with their long axis perpendicular to the ectodermal surface. The microvilli project into the cuticle, and probably serve to anchor the cuticle to the ectoderm. In the hydrocaulus the periderm is loosely applied to the ectoderm: in this region microvilli are absent from ectodermal cells. The periderm is a layered structure composed of finely filamentous material. No structural basis is found for the previously reported differential staining of peridermal layers in the hydrocaulus.

Notes: The nuchal organs of polychaetes from four different families (Nereidae, Nephtyidae, Phyllodocidae and Glyceridae) were examined with the light and electron microscopes. In each case, the organ consists of ciliated cells and primary sensory elements. The ciliated cells are similar to the cells of the adjacent epidermis but bear motile cilia. Primary sensory neurons are situated within the organs in Nephtyidae and Phyllodocidae, but are located within the brain in Nereidae and Glyceridae. Each sensory cell gives rise to a distal process which penetrates between the ciliated cells to form an apical sensory bulb bearing modified cilia. Apically these processes are lined with juxtamembranous plaques. The ciliated cells are innervated by efferent axons from the brain, and in Nereis the axons appear to be peptidergic. The elements comprising the nuchal organs closely resemble those of the vertebrate olfactory mucosa.

Notes: The cuticle of five species of Oligochaeta, chosen to represent differences in size and a variety of biotopes, was studied electron microscopically after fixation with the acrolein-TAPO-osmium tetroxide method. Five distinct layers in the cuticle of all studied species were found. Staining with lead and uranyl ions or with silver proteinate visualized basically the same structural components of the cuticle, but the degree of electron opacity and the distribution of the electron-opaque stain in these components differed according to the staining method used. Since the acrolein-TAPO-osmium tetroxide method visualized the cuticular zones preferentially stained by Thiéry's silver proteinate method, it was concluded that the TAPO method may be considered suitable for the visualization of polysaccharides. Staining with phosphotungstic acid provided some information on the composition of the cuticle of Oligochaeta not obtained by staining ultrathin sections with lead and uranyl ions nor with silver proteinate. The conclusion is that phosphotungstic acid binds to polysaccharides which do not contain vicglycol groups nor active sites responsible for the positive reaction with lead and uranyl salts. Structural components in the cuticle of the oligochaetes studied were characteristic for each species. The taxonomic value of such components, however, must be confirmed by examination of a larger number of species of oligochaetes.

Notes: Laboratory-reared outgrowths of the freshwater sponge Corvomeyenia carolinensis Harrison were examined using histological and histochemical techniques, supplemented by phase contrast observations of cellular behavior. The tissue and cellular components of the spongillid outgrowth region were defined in terms of function and morphogenic state. Archeocytes differ considderably, in both histochemical and morphological characteristics, from other cell types of the adult sponge, being histochemically similar to stem cells reported from a variety of developmental series. Archeocytes exhibit cytological characteristics of unspecialized cells capable of high levels of synthetic activity while other cell types of C. carolinensis, for the most part, can be characterized as fully differentiated cells displaying more restricted synthetic capabilities but often accumulating neutral mucoproteins. The presence of aggregates of amebocytes, not identifiable as archeocytes and possibly engaged in gemmule formation, is discussed in terms of current concepts of gemmulation and cellular developmental capabilities in sponges.

Notes: The surface structures of the antennular flagella of Pagurus alaskensis are described in detail. Attention is directed towards the surface morphology of two types of possible sensilla: (1) exoskeletal pores (1.0-3.0 μm in diameter); (2) setae of various kinds. In addition, small (0.1-0.2 μm) pits occur in the exoskeleton which are not considered to be sensory in function. The exoskeletal pores are found at fairly specific locations on both the inner and outer flagella, particularly on the short segments of the outer flagella. Neither the inner nor the outer flagella are bilaterally symmetrical with respect to their setal armature. On the outer flagellum six groups of setae may be distinguished: lateralmesial; dorsal; ventral; accessory; aesthetasc; setae of the distal segment. On the inner flagellum setae of the mesial and lateral rows form distinctive groups. The morphology, orientation and locations of all the flagellar setae are defined and where possible the numbers of the various morphological types within the specific setal groups are given. It is noteworthy that many setal types have obvious apical pores and yet no pores could be found in the chemoreceptive aesthetasc setae. The functions of the various setae are discussed in relation to their topographical position and to existing electrophysiological and behavioral data. Some suggestions are made about future experiments to demonstrate the central connections of specific sensilla or groups of sensilla and to show their significance in the whole animal.

Notes: Blood vessels in Nereis japonica were studied by electron microscopy. It was found that blood vessels regardless of location were similar in the basic organization of the basal lamina and the usual presence of collagen fibrils on the vessel wall. Differences arise, depending on whether the outside of the basal lamina is covered by peritoneal cells, by gut epithelium, or by epidermis. These relate to the location of the vessels in mesenteries, gut or epidermis, but do not reflect basic structural differences in the vessels themselves. Furthermore, it was concluded that true endothelial cells do not exist in the circulatory system of Nereis japonica and that, in this respect, the system is essentially different from that of vertebrates, in which endothelial cells line the vessels of a closed circulatory system. These considerations lead to the further conclusion that the vascular lumen in Nereis is essentially interstitial space and that the system, which has been known as a typical “closed” circulatory system in annelids, is actually an open circulatory system. Peritoneal cells covering the walls of internal vessels show various degrees of muscular differentiation and those possessing myofilaments may be called “myomesothelial cells.”

Notes: Allografts of skin were observed in Chelydra serpentina. The response to these grafts was modified by a previous transplantation of a limb bud at an early embryonic stage. When the same donor was used for all transplants, the first skin graft was accepted by the host. A second skin graft, however, was rejected at about the rate of a simple first set allograft of skin. The animals were conditioned by the embryonic limb graft; this embryonic graft can be undergoing rejection at the same time a first set skin graft from the same donor was being accepted. The tolerance induced by the embryonic graft was sepcific for its donor.

Notes: As part of program of research into insect cellular immunity, an integrated light and electron microscopic study of the hemocytes of seven members of the Order Dictyoptera has been made. In fresh hemolymph, five cell types, the prohemocytes, plasmatocytes, granular cells, spherule cells and cystocytes, are easilv distinguished. However, in thick Araldite sections and in thin sections in the electron microscope it is sometimes difficult to identify the various cell types. The reasons for this difficulty are discussed.Granules with a microtubular substrcture are found in the plasmatocytes, spherule cells and cystocytes. In the plasmatocytes these granules have a different ultrastructure than those in the spherule cells and cystocytes. The in vitro fragility of these granules in both the spherule cells and cystocytes during coagulation partially explains the previous confusion in distinguishing these two cell types.Evidence is presented which indicates that the plasmatocytes, granular cells and spherule cells represent a developmental series originating from the prohemocytes. Where exactly the cystocytes are derived from is unknown.

Notes: A cardiaca-allatal commissural plexus (CACP) lies between and partly overlapping the postcommissural lobes of the corpora cardiaca (CC), the nervi corpori allati I (NCA I) and the corpora allata (CA). CACP, which is often continuous posteriorly with a complicated postallatal plexus (PAP), comprises a variable number of connectives with neurosecretory processes linking the cardiaca-commissural organ or dorsal cardiac commissure (containig tritocerebral fibres) to the NCA I. the allatal commissure and the CA. Neurosecretory processes are exchanged between the two halves of the cephalic neuroendocrine complex (CNC) both intracerebrally at different locales, possibly to ensure functional synchrony of CNC components.NCA I and CACP are drawn out with their stroma to varying extents over the CA. Histophysiological evidence suggests that part of the stainable secretion stored in, and or in axonal transit through CA may be released through CA surface; NCA I, the nervi cardiostomatogastrici, CACP, perhaps also NCA II may function as neurohaemal areas. A “directed” neurosecretory pathway could be distinguished from PAP to the foregut and the fat body. The degree of spatial intimacy detected between neurosecretory and stomatogastric components of CNC suggests that the two systems may function in an integrated fashion. The recurrent-oesophageal nerve complex serves not only for a direct transport of neurosecretion, but also as one of the sites of its release.