ALBERT

Beschreibung: Auch in der Zukunft wird Getreide ein wichtiges Grundnahrungsmittel sein. Umso wichtiger ist nachhaltiges Handeln im Alltag der Berufe rund um das Korn. Der Modellversuch Korn-Scout leistet einen Beitrag dazu, Nachhaltigkeit in die Ausbildungen von Bäckerinnen und Bäckern, Brauerinnen und Brauern, Mälzerinnen und Mälzern, Konditorinnen und Konditoren, Fachkräften für Lebensmitteltechnik sowie Verfahrenstechnologinnen und Verfahrenstechnologen Mühlen- und Getreidewirtschaft zu integrieren. Gemeinsam mit Praxispartnerinnen und -partnern wurden im Modellversuch Lehr-/Lernmaterialien entwickelt und erprobt sowie Kompetenzen identifiziert, die die Nachhaltigkeit der Korn-Berufe stärken. Dabei zeigt sich: Kommunikation entlang der Wertschöpfungskette ist ein zentraler Gelingensfaktor für nachhaltiges Handeln und eine nachhaltige Entscheidungsfindung.

Beschreibung: Bundesweit gibt es über 32.000 allgemeinbildende Schulen - mit riesigen Klimaschutzpotenzialen. Das Projekt Schools4Future befähigt Kinder und Jugendliche darin, selbst daraus einen klimaneutralen Lernort zu machen. Interesse und Einsparmöglichkeiten sind riesig.

Beschreibung: Das Handbuch ist ein Ergebnis des Forschungsprojektes "Transformatives Lernen durch Engagement - Soziale Innovationen als Impulsgeber für Umweltbildung und Bildung für nachhaltige Entwicklung". Im Projekt wurden in Kooperation zwischen Schulen und zivilgesellschaftlichen Nachhaltigkeitsinitiativen sogenannter Lernwerkstätten im Modus des Service-Learning initiiert, um Kinder und Jugendliche für ein Nachhaltigkeitsengagement zu begeistern. Das Handbuch liefert theoretisches Hintergrundwissen, praktische Empfehlungen, Methoden und Materialien zur Durchführung solcher Lernwerkstätten im Kontext von Bildung für nachhaltige Entwicklung. Es richtet sich an Multiplikator*innen in der schulischen und außerschulischen Bildungsarbeit, sowie an Praxisakteur*innen eines sozial-ökologischen Wandels und möchte dazu ermutigen, innovative Lernformen zu erproben und sich für nachhaltigkeitsorientierte Lernkulturen einzusetzen.

Beschreibung: 96 Prozent der Jugendlichen besitzen ein Smartphone und nutzen damit verbundene Dienste. Jedoch verursacht Informations- und Kommunikationstechnik (IKT) einen hohen Energie- und Ressourcenverbrauch. Es fehlt bislang an Konzepten und Ansätzen im Bereich Bildung, um die Nutzung solcher Technologien klimafreundlicher zu gestalten. Im Rahmen eines Modellprojekts wurde daher ein handlungspsychologisch fundierter didaktischer Ansatz erarbeitet, der auf die Förderung nachhaltigen Verhaltens im Hinblick auf IKT abzielt.

Beschreibung: Anna Bliesner-Steckmann stellt sich der Frage, wie Bildung respektive Didaktik beschaffen sein muss, damit ein moralisch-nachhaltiges Handeln nicht in eine normative Pädagogik mündet. Die Autorin stellt dazu den selbstaufgeklärten, mündigen Lernenden in den Fokus ihrer Arbeit und weist nach, dass es neben einer lerntheoretischen auch einer handlungstheoretischen Grundlegung auf psychologischer Basis bedarf. Ein zentrales Ergebnis ihrer interdisziplinären Studie ist das entwickelte Prozessmodell zu moralisch-nachhaltigem Urteilen und Handeln, aus welchem sich konkrete Hinweise für die Gestaltung pädagogischer Interventionen ableiten lassen.

Beschreibung: Soziale Innovationen leisten einen wichtigen Beitrag zur nachhaltigkeitsorientierten Transformation der Gesellschaft. Damit Lösungen für drängende Klima- und Ressourcenprobleme gefunden werden, müssen wir besser als bislang verstehen, wie sich soziale Innovationen verbreiten, sich dabei wandeln und wie sie die Gesellschaft verändern können. Marco Hasselkuß entwickelt einen konzeptionellen Rahmen zur Analyse sozialer Innovation in Netzwerken. Am Fall von Netzwerken zwischen Schulen und Unternehmen in der "Bildung für nachhaltige Entwicklung" zeigt er, wie sich soziale Innovationen im Verlauf ihrer Verbreitung und Umsetzung verändern können - und wie das mit der Strukturation von Netzwerken als soziale Systeme zusammenhängt. Er erforscht Typen von Modifikationen durch Kontextanpassung und Lernprozesse und untersucht Strategien von Akteuren, um erfolgreich transformative Wirkungen zu erzielen. Die Analyseergebnisse integriert er in einem Prozessmodell und zeigt Handlungsmöglichkeiten für die Praxis.

Beschreibung: Im Diskurs um eine Hochschulbildung für nachhaltige Entwicklung ist die Frage zentral, welche didaktischen Arrangements besonders geeignet sind, Studierende als Change Agents zur Gestaltung einer zukunftsfähigen Gesellschaft zu befähigen und ihnen eine überfachliche Kompetenzentwicklung zu ermöglichen. Das problembasierte und selbstbestimmte Lernen wird dabei als wichtiges didaktisches Konzept diskutiert, ohne jedoch die eigentlichen Lernprozesse im Sinne der individuellen Auseinandersetzung von Lernenden mit Nachhaltigkeitsthematiken zu fokussieren. Die vorliegende Untersuchung will diese Forschungslücke schließen und stellt daher die Frage in den Mittelpunkt, wie Studierende im Rahmen eines problembasierten und selbstorganisierten Seminars über Nachhaltigkeit lernen. Die Ergebnisse der Fallstudie zeigen, dass sich das studentische Lernen als subjektiv bedeutsamer und handelnder Weltaufschluss vollzieht, der an die Vorerfahrungen der Studierenden mit Nachhaltigkeitsthemen anknüpft und ein transformatives Lernen befördert. Die Studie leistet damit einen Beitrag für eine Qualitätsverbesserung hochschuldidaktischer Lehr-Lernarrangements im Kontext einer Bildung für nachhaltige Entwicklung. Sie richtet sich an HochschuldiaktikerInnen, NachhaltigkeitsexpertInnen und an interessierte Studierende.

Beschreibung: Die "Third Mission" wird aktuell als ergänzende Hochschulaufgabe neu entdeckt. In ihrer Bedeutung und Reputation steht sie aber klar hinter der "First Mission" Forschung und der "Second Mission" Lehre. Sie soll das Aufgabenspektrum von Hochschulen eher abrunden. Was würde es bedeuten, wenn man die "Third Mission" als "First Mission" denkt, d.h. auch die Aufgaben von Forschung und Lehre konsequent aus der Perspektive der gesellschaftlichen Funktion von Hochschulen entwickelt? Die These dieses Beitrages lautet: Damit wäre ein erhebliches Belebungsprogramm für die Hochschullandschaft verbunden. Es lohnt daher, eine stärkere Third Mission-Orientierung des Hochschulsystems voranzutreiben.

Beschreibung: Wie werden Handys hergestellt? Woraus bestehen sie? Was bedeutet es für die Umwelt, wenn immer die neusten Modelle angeschafft werden? Und was passiert mit den Geräten, wenn wir sie nicht mehr brauchen und zurückgeben? Das Buch nimmt den Leser/die Leserin mit auf eine spannende Reise durch das Rohstoffleben eines Handys und zeigt, wie Alltagstechnik bewusster und umweltverträglicher genutzt werden kann. Durch seine fachdidaktische Einordnung und seine wissenschaftlich fundierten Inhalte ist das Buch ideal als Grundlage für Kurse an Schulen und Hochschulen geeignet.

Beschreibung: Was kann eine Bildung für nachhaltige Entwicklung in einem lokalen Kontext konkret bedeuten? Welche Rolle spielen Hochschulen in den kommunalen Bildungslandschaften und der lokalen Verbreiterung von BNE? Diesen Fragen wird anhand der Erfahrungen mit BNE in Erfurt nachgegangen. Am Beispiel des Projekts "Qualitätssicherung und Qualitätsmanagement in der Bildung für nachhaltige Entwicklung" (QuaSi BNE) wird gezeigt, wie BNE-Ziele in kommunale und universitäre Bildungskonzepte integriert, mit Hilfe von erfahrungsorientierten Lehr- und Lernmethoden qualitätsvoll implementiert und durch Netzwerke stabilisiert werden und welche Herausforderungen und Potentiale damit verbunden sein können.

Beschreibung: Der vorliegende Beitrag setzt sich mit der Zusammenarbeit innerhalb eines Netzwerkes auseinander und betrachtet insbesondere die Rolle der Zusammenarbeit für die Implementation schulischer Innovationen. Untersuchungsgegenstand der explorativen Studie ist ein Netzwerk bestehend aus einzelnen Lernpartnerschaften zwischen Schulen und Unternehmen. Anhand von zwölf leitfadengestützten Interviews mit Personen aus vier Kooperationen innerhalb des Netzwerkes wird untersucht, 1) durch welche Kriterien die Qualität der Zusammenarbeit innerhalb des Netzwerkes beschrieben werden kann, 2) welche hemmenden und fördernden Bedingungen die Kooperation beeinflussen und 3) in welchem Zusammenhang die Qualität der Zusammenarbeit im Netzwerk mit der Implementation schulischer Innovationen steht. Befunde der Untersuchung geben Hinweise darauf, dass die Zusammenarbeit in Netzwerken als Instrument bei der Implementation von Innovationen angesehen werden kann und liefern mögliche Ansatzpunkte für die weiterführende Kooperations- und Netzwerkforschung.

Beschreibung: Zahlreiche Untersuchungen prognostizieren einen erheblichen Anstieg des globalen Ressourcenverbrauchs in den nächsten Jahrzehnten, wenn es nicht zu grundlegenden Veränderungen der Wirtschaftsweise kommt. Gegensteuern ist möglich durch politische Maßnahmen und einem Umdenken sowohl in der Produkt-Dienstleistungs-Entwicklung, bei der Gestaltung von Wertschöpfungsketten als auch im Konsumverhalten. Das Projekt BilRess identifiziert und entwickelt Angebote für alle Bildungsbereiche zum Thema Ressourcenschonung und Ressourceneffizienz. Die in diesem Artikel vorgenommene Bestandsaufnahme der verschiedenen Bildungsangebote und die Analyse der Bildungsbereiche zeigt eine Vielzahl von Verbesserungsmöglichkeiten und Anknüpfungspunkte zur Implementierung von Ressourcenschonung und -effizienz in die unterschiedlichen Bildungsbereiche. Dabei wird immer wieder deutlich, dass die einzelnen Bildungsbereiche nicht isoliert betrachtet werden können. Die herausgearbeiteten Handlungsempfehlungen fließen in die Erstellung einer "Roadmap Ressourcenbildung" ein.

Beschreibung: Die Dissertationsschrift von Christian R. Lindfeld beschäftigt sich mit der integrativen Innovations- und Gründungsförderung aus Universitäten und Forschungseinrichtungen und betritt mit der Konzeption der Zukunftsinnovation eines Center of Entrepreneurial Opportunity Discovery and Development (CEODD) wissenschaftliches Neuland. Er greift damit die aus der Darstellung des Status quo resultierende Konklusion einer sich aufdrängenden Erneuerungsaufgabe in der Innovations- und Gründungsförderung auf und knüpft hierzu an den Forschungsanstrengungen der Bergischen Universität Wuppertal und des Wuppertal Instituts für Klima, Umwelt, Energie zur Theorie der Entrepreneurship Education 2.0 an. Im gründungsdidaktisch fundierten Modell eines CEODD werden insbesondere die theoretischen und konzeptionellen Grundlagen zur Erschließung und Entwicklung unternehmerischer Persönlichkeiten und Organisationen einbezogen, um dem zentralen Anspruch der Bewirkung zusätzlicher Unternehmensgründungen gerecht zu werden. Hierzu werden nicht nur die neuartigen, elementenhaft-synthetisch zusammengeführten Interaktions- und Wirkungsmechanismen der Zukunftsinnovation konzipiert, sondern der Autor versteht die Notwendigkeit, ebenfalls theoretisch fundierte, systematische Implementierungsphasen und exemplarische Umsetzungsmöglichkeiten zu beschreiben. Die erarbeiteten Erkenntnisse werden auch als Einladung an die verbundene wissenschaftliche Community verstanden, diesen Beitrag aufzunehmen und sich den weiteren Fragestellungen nachhaltig zuzuwenden.

Beschreibung: On 2012 May 20 and 29, two damaging earthquakes with magnitudes Mw 6.1 and 5.9, respectively, struck the Emilia-Romagna region in the sedimentary Po Plain, Northern Italy, causing 26 fatalities, significant damage to historical buildings and substantial impact to the economy of the region. The earthquake sequence included four more aftershocks with Mw ≥ 5.0, all at shallow depths (about 7–9 km), with similar WNW–ESE striking reverse mechanism. The timeline of the sequence suggests significant static stress interaction between the largest events. We perform here a detailed source inversion, first adopting a point source approximation and considering pure double couple and full moment tensor source models. We compare different extended source inversion approaches for the two largest events, and find that the rupture occurred in both cases along a subhorizontal plane, dipping towards SSW. Directivity is well detected for the May 20 main shock, indicating that the rupture propagated unilaterally towards SE. Based on the focal mechanism solution, we further estimate the co-seismic static stress change induced by the May 20 event. By using the rate-and-state model and a Poissonian earthquake occurrence, we infer that the second largest event of May 29 was induced with a probability in the range 0.2–0.4. This suggests that the segment of fault was already prone to rupture. Finally, we estimate peak ground accelerations for the two main events as occurred separately or simultaneously. For the scenario involving hypothetical rupture areas of both main events, we estimate Mw = 6.3 and an increase of ground acceleration by 50 per cent. The approach we propose may help to quantify rapidly which regions are invested by a significant increase of the hazard, bearing the potential for large aftershocks or even a second main shock.

Beschreibung: The Van (Eastern Anatolia, Turkey) earthquake occurred on Sunday, October 23, 2011 with a moment magnitude of 7.2. The tectonics of this region is characterized by strike–slip faulting on the Bitlis Suture Zone, and thrusting in the Zagros fold and thrust belt. Using high-rate (1 second) GPS data from permanent GNSS stations from the CORS-TR network, co-seismic displacements of eleven stations were determined using precise point positioning during this earthquake. We used the time series of coordinate changes for fourteen CORS-TR stations, and calculated the crust movements before and after the earthquake. According to the PPP solutions computed using high frequency GPS data to determine the co-seismic motions of stations, we conclude for the Van earthquake an occurrence time of 10:41:22 (UTC). No pre-seismic horizontal movement of stations at the level more than 5 mm before the earthquake could be observed. That means that no kinematic warning or prediction before the earthquake exists. Along an east–west horizontal line north of the Van Sea with a length of about 100 km, the northern part of this line experienced extension of 0.2–1 ppm in a NW–SE direction. The southern part experienced N–S shortening of 0.5–1.5 ppm. The N–S shortening we estimated geodetically matches well with the N–S shortening and thrust focal mechanism derived independently using seismic data by the USGS. Co-seismic surface displacements derived from the GPS data are consistent with the teleseismic source model given by the USGS. The geodetic source model derived from the GPS data reproduces the same moment magnitude and centroid as the teleseismic model, but shows a higher spatial resolution of the slip distribution. We also analyzed the post-seismic surface displacements derived from the GPS data within the first two weeks after the mainshock. No reasonable slip distribution on the co-seismic fault plane could be found, indicating that the sources for the early post-seismic deformation might come from the widely scattered aftershocks.

Beschreibung: We use local earthquake data observed by the amphibious, temporary seismic MERAMEX array to derive spatial variations of seismic attenuation (Qp) in the crust and upper mantle beneath Central Java. The path-averaged attenuation values (t∗) of a high quality subset of 84 local earthquakes were calculated by a spectral inversion technique. These 1929 t∗-values inverted by a least-squares tomographic inversion yield the 3D distribution of the specific attenuation (Qp). Analysis of the model resolution matrix and synthetic recovery tests were used to investigate the confidence of the Qp-model. We notice a prominent zone of increased attenuation beneath and north of the modern volcanic arc at depths down to 15 km. Most of this anomaly seems to be related to the Eocene–Miocene Kendeng Basin (mainly in the eastern part of the study area). Enhanced attenuation is also found in the upper crust in the direct vicinity of recent volcanoes pointing towards zones of partial melts, presence of fluids and increased temperatures in the middle to upper crust. The middle and lower crust seems not to be associated with strong heating and the presence of melts throughout the arc. Enhanced attenuation above the subducting slab beneath the marine forearc seems to be due to the presence of fluids.

Beschreibung: For a long time the root mean square (RMS) error has been used in the EM community: - to characterize data fit for a particular model; - as a criterion to compare several models obtained from inversion. The RMS error appears to be a natural choice since we usually tackle inverse problems in a least-squares sense. Over the years, RMS became a customary criterion and gained ultimate significance. However, on the hunt for low RMS values, one often needs to introduce subjectivity by arbitrarily adjusting error floors or masking “bad” data without referring to the assumptions behind RMS. In this contribution, we revisit basic assumptions behind RMS, demonstrate its deficiency and propose alternative ways, which may provide more insight into our data and allow a more comprehensive assessment of the quality of the modelling result/resistivity model.

Beschreibung: Amplitude ratio of 30 short-period conspicuous P5KP and PKPab phases from five intermediate depth or deep events in Fiji-Tonga recorded at European stations around 150° distance shows a mean value two to three times the ratio of the synthetic amplitudes obtained by the normal-mode theory (and ak135 model) or by full-wave theory (and PREM). There is a large variance in the results, also observed in five amplitude ratios from one event in Argentina observed at temporary stations in China around 156°. Global recordings of three major deep earthquakes in Fiji, Bonin, and Western Brazil observed at ASAR, WRA, and ZRNK arrays, at 59 North America stations and at six South Pole stations displayed conspicuous P4KP and PcP (or ScP) phases. The amplitude ratio values of P4KP vs P(S)cP are sometimes almost one order of magnitude larger than the corresponding values of the synthetics. In both cases, arrival times and slowness values (corrected for ellipticity and station elevation) at the distances up to 23° beyond the A cutoff point predicted by ray theory match both the synthetics, suggesting the observations are the AB branch of PmKP (m = 4, 5) around 1 Hz. In disagreement to ray theory, no reliable BC branch is observed neither on the recordings nor on the normal-mode synthetics. The high amplitude ratio values cannot be explained by realistic perturbations of the velocity or attenuation values of the global models in the proximity of the core-to-mantle boundary (CMB). We speculate that the focusing effects and/or strong scattering most likely associated to some anomalous velocity areas of the lowermost mantle are responsible for that. The results suggest limitations of the previous evaluations of the short-period attenuation in the outer core from PmKP amplitudes (m ≥ 3), irrespective of the fact that they are obtained by using ray theory, normal-mode or full-wave synthetics. Attempts to use PmKP arrival times in order to refine velocity structure in the proximity of CMB should be also regarded with care if the propagation times have been computed with ray theory.

Beschreibung: The territory of Lithuania and adjacent areas of the East European Craton have always been considered a region of low seismicity. Two recent earthquakes with magnitudes of more than 5 in the Kaliningrad District (Russian Federation) on 21 September 2004 motivated re-evaluation of the seismic hazard in Lithuania and adjacent territories. A new opportunity to study seismicity in the region is provided by the PASSEQ (Pasive Seismic Experiment) project that aimed to study the lithosphere–asthenosphere structure around the Trans-European Suture Zone. Twenty-six seismic stations of the PASSEQ temporary seismic array were installed in the territory of Lithuania. The stations recorded a number of local and regional seismic events originating from Lithuania and adjacent areas. This data can be used to answer the question of whether there exist seismically active tectonic zones in Lithuania that could be potentially hazardous for critical industrial facilities. Therefore, the aim of this paper is to find any natural tectonic seismic events in Lithuania and to obtain more general view of seismicity in the region. In order to do this, we make a manual review of the continuous data recorded by the PASSEQ seismic stations in Lithuania. From the good quality data, we select and relocate 45 local seismic events using the well-known LocSAT and VELEST location algortithms. In order to discriminate between possible natural events, underwater explosions and on-shore blasts, we analyse spatial distribution of epicenters and temporal distribution of origin times and perform both visual analysis of waveforms and spectral analysis of recordings. We show that the relocated seismic events can be grouped into five clusters (groups) according to their epicenter coordinates and origin and that several seismic events might be of tectonic origin. We also show that several events from the off-shore region in the Baltic Sea (at the coasts of the Kaliningrad District of the Russian Federation) are non-volcanic tremors, although the origin of these tremor-type events is not clear.

Beschreibung: We performed a teleseismic P wave tomography study using seismic events at both teleseismic and regional distances, recorded by a temporary seismic array in the Argentine Puna Plateau and adjacent regions. The tomographic images show the presence of a number of positive and negative anomalies in a depth range of 20–300 km beneath the array. The most prominent of these anomalies corresponds to a low-velocity body, located in the crust, most clearly seen in the center of the array (27°S, 67°W) between the Cerro Peinado volcano, the Cerro Blanco caldera and the Farallon Negro in the east. This anomaly (southern Puna Magmatic Body) extends from the northern most part of the array and follows the line with the highest density of stations towards the south where it becomes smaller. It is flanked by high velocities on the west and the east respectively. On the west, the high velocities might be related to the subducted Nazca plate. On the northeast the high velocity block coincides with the position of the Hombre Muerto basin in the crust and could be indicating an area of lithospheric delamination where we detected a high velocity block at 100 km depth on the eastern border of the Puna plateau, north of Galan. This block might be related to a delamination event in an area with a thick crust of Paleozoic metamorphic rocks at the border between Puna and Eastern Cordillera. In the center of the array the Southern Puna magmatic body is also flanked by high velocities but the most prominent region is located on the east and is interpreted as part of the Sierras Pampeanas lithosphere with high velocities. The position of the Sierras Pampeanas geological province is key in this area as it appears to limit the extension of the plateau towards the south.

Beschreibung: Clear S-to-P converted waves from the crust–mantle boundary (Moho) and lithosphere–asthenosphere boundary (LAB) have been observed on the eastern part of the Dead Sea Basin (DSB), and are used for the determination of the depth of the Moho and the LAB. A temporary network consisting of 18 seismic broad-band stations was operated in the DSB region as part of the DEad Sea Integrated REsearch project for 1.5 years beginning in September 2006. The obtained Moho depth (∼35 km) from S-to-P receiver functions agrees well with the results from P-to-S receiver functions and other geophysical data. The thickness of the lithosphere on the eastern part of the DSB is about 75 km. The results obtained here support and confirm previous studies, based on xenolith data, geodynamic modeling, heat flow observations, and S-to-P receiver functions. Therefore, the lithosphere on the eastern part of the DSB and along Wadi Araba has been thinned in the Late Cenozoic, following rifting and spreading of the Red Sea. The thinning of the lithosphere occurred without a concomitant change in the crustal thickness and thus an upwelling of the asthenosphere in the study area is invoked as the cause of the lithosphere thinning.

Beschreibung: Human activities, including operations related to mining and reservoir exploitation, may induce seismicity and pose a risk for population and infrastructures. While different observations are commonly used to assess the origin of earthquakes, there is a lack of rules and methods for the discrimination between natural and induced seismicity. The inversion and decomposition of the full moment tensor and the observation of relevant deviation from a pure double couple (DC) model may be an indicator for induced seismicity. We establish here a common procedure to analyse a set of natural and induced events of similar magnitude, which occurred in Germany and neighbouring regions. The procedure is based on an inversion method and on a consistent velocity model and recording network. Induced seismicity is recorded during different mining and/or reservoir exploitations. Moment tensors are inverted using a multi-step inversion approach. This method, which was successfully applied in previous studies at regional and teleseismic distances, is further developed here to account for full moment tensor analysis. We first find a best DC solution and then perform a full moment tensor inversion, fitting full waveforms amplitude spectra at regional distances. The moment tensor solution is decomposed into DC, compensated linear vector dipole and isotropic terms. The discrimination problem is then investigated through the evaluation of distributions of non-DC source components for natural and induced data sets. Results illustrate the potential of the inversion and discrimination approach. Additional detailed analyses are carried out for the two most significant induced earthquakes, and rupture models are compared with the full moment tensor solutions.

Beschreibung: Near‐field ground‐motion data are available in semi‐real time either from modern strong‐motion or continuous Global Positioning System (GPS) networks, allowing robust solutions for earthquake source parameters, which are useful for rapid disaster assessment and early warning. These wide applications require the ground‐motion data to cover a very broad frequency band that, however, is usually not available. This paper presents a case study on the 2011 Mw 9.0 Tohoku earthquake, showing how the ground‐motion information from geodetic and seismic instrumentations is complementary, and suggesting the joint use of both types of data, particularly when the network coverage is sparse. First the strong‐motion records from the two Japanese networks, K‐NET and KiK‐Net, are analyzed using an automatic empirical baseline correction tool. The static coseismic displacement data are obtained by double integration and then used to derive the permanent slip distribution on the earthquake fault. Comparisons with the corresponding GPS‐based solutions yield a quantitative estimation of uncertainties of the empirical baseline correction. Furthermore, a dozen nearby GPS and strong‐motion station pairs are selected to demonstrate that the information in their time series agrees with each other. Finally, methods for combining both types of ground‐motion observation systems are discussed, and the wide applicability of this approach is highlighted.

Beschreibung: Based on passive seismic interferometry applied to ambient seismic noise recordings between station pairs belonging to a small-scale array, we have obtained shear wave velocity images of the uppermost materials that make up the Dead Sea Basin. We extracted empirical Green’s functions from cross-correlations of long-term recordings of continuous data, and measured inter-station Rayleigh wave group velocities from the daily correlation functions for positive and negative correlation time lags in the 0.1–0.5 Hz bandwidth. A tomographic inversion of the travel times estimated for each frequency is performed, allowing the laterally varying 3-D surface wave velocity structure below the array to be retrieved. Subsequently, the velocity-frequency curves are inverted to obtain S-wave velocity images of the study area as horizontal depth sections and longitude- and latitude-depth sections. The results, which are consistent with other previous ones, provide clear images of the local seismic velocity structure of the basin. Low shear velocities are dominant at shallow depths above 3.5 km, but even so a spit of land with a depth that does not exceed 4 km is identified as a salt diapir separating the low velocities associated with sedimentary infill on both sides of the Lisan Peninsula. The lack of low speeds at the sampling depth of 11.5 km implies that there are no sediments and therefore that the basement is near 10–11 km depth, but gradually decreasing from south to north. The results also highlight the bowl-shaped basin with poorly consolidated sedimentary materials accumulated in the central part of the basin. The structure of the western margin of the basin evidences a certain asymmetry both whether it is compared to the eastern margin and it is observed in north–south direction. Infill materials down to ∼8 km depth are observed in the hollow of the basin, unlike what happens in the north and south where they are spread beyond the western Dead Sea shore.

Beschreibung: Adapting the magnetotelluric (MT) method for monitoring the dynamic behaviour of the Andean subduction system in Northern Chile is focus of this thesis. Electromagnetic fields, sampled at nine permanent MT stations which cover an area of approximately 250 x 100 km² in the Andean fore-arc, are evaluated to monitor the electrical resistivity structure associated with the deep hydraulic system of the subduction zone. The long term monitoring of geo-electromagnetic fields reveals different types of temporal variations of vertical magnetic transfer functions (VTF) in different period ranges which are evaluated and interpreted. Computation of time series of daily VTFs of an overall length of 4 years exhibit seasonal variations with amplitudes of more than 100% of their absolute values for different components at all sites of the array. The observed seasonal variation affects almost exclusively the east-west magnetic field component for periods between 100 and 3000 seconds. These ground-based measurements of magnetic and electric fields exhibit statistically significant coherences with the interplanetary electric field (IEF) derived from solar wind and interplanetary magnetic field data of the Advanced Composition Explorer (ACE) satellite. The IEF penetrates the polar ionosphere from where it propagates towards equatorial latitudes by wave guide transmission, with ionosphere and solid Earth acting as conducting boundaries. Signal coherence between IEF and ground data peaks at periods of approximately 90 min and up to the four harmonics. Coherence values reach 0.4 at these periods and depend on the electromagnetic field component. They vary with season and local time. Transfer functions computed between IEF and ground-based electric and magnetic fields show local maxima at similar periods (90 min and harmonics). The coupling between the east-west magnetic field component and the IEF shows significant seasonal variability, much larger than for the other electromagnetic field components. We conclude that the IEF drives primarily a global circuit of Pedersen currents in the ionosphere. Resulting time-varying magnetic fields induce electric currents in the ground. Related ground-based magnetic (primarily north-south) and electric (primarily east-west) signals vary coherently at all local times and seasons. Conversely, magnetic signals caused by the IEF-driven Hall currents depend much on local time and season. We show for the first time that these ionospheric Hall currents cause no induction in the ground, but they generate magnetic signatures that are confined to the waveguide between ionosphere and Earth's surface. Geo-electromagnetic depth sounding applications as MT assume both spatial and temporal uniform external electromagnetic source fields. The seasonal variation of VTFs exhibits a systematic violation of this basic assumption in Northern Chile. The consequence is a systematic seasonal rotation and length variation of the induction arrows of the period band between 100 and 3000 seconds. If not taken into account, the structure of an electrical resistivity model of the subsurface, obtained by MT inversion, would be distorted. Removing this source field effect with a low-pass filter allows evaluation of residual variations of the VTF time-series which last longer than one year. During 2008 and 2009, I observe a significant variation of the VTFs in the southern part of the network for periods between 1500 and 4000 seconds. To simulate this variation, a 3D reference resistivity model is obtained by inversion of MT and VTF data using eight stations of the network. A region of high conductivity matches spatially with the hydrated mantle wedge. By trial and error, the 3D reference image of the deep electrical resistivity structure is modified and 3D forward modelling is applied to explain temporal variations in the VTFs similar to our observations. That requires modification of the electrical resistivity structure in a region which coincides roughly with the plate interface directly down-dip of the Mw7.7 2007 Tocopilla earthquake. We speculate that the anomalous temporal variations of the VTFs may be caused by large scale fluid relocation in the aftermath of the seismic event.

Beschreibung: The Himalaya and the Tibetan Plateau are uplifted by the ongoing northward underthrusting of the Indian continental lithosphere below Tibet resulting in lithospheric stacking. The layered structure of the Tibetan upper mantle is imaged by seismic methods, most detailed with the receiver function method. Tibet is considered as a place where the development of a future craton is currently under way. Here we study the upper mantle from Germany to northern Sweden with seismic S receiver functions and compare the structure below Scandinavia with that below Tibet. Below Proterozoic Scandinavia, we found two low-velocity zones on top of each other, separated by a high-velocity zone. The top of the upper low-velocity zone at about 100 km depth extends from Germany to Archaean northern Sweden. It agrees with the lithosphere-asthenosphere boundary (LAB) below Germany and Denmark. Below Sweden it is known as the 8°discontinuity, or as a mid-lithospheric discontinuity (MLD), similar to observations in North America. Seismic tomography places the LAB near 200 km in Scandinavia, which is close to the top of our deeper low-velocity zone. We also observed the bottom of the asthenosphere (the Lehmann discontinuity) deepening from 180 km in Germany to 260 km below Sweden. Remnants of old subduction in the upper about 100 km below Scandinavia and Finland are known from controlled source seismic experiments and local earthquake studies. Recent tomographic studies indicate delamination of the lithosphere below southern Scandinavia and northern Germany. We are suggesting that the large-scale layered structure in the Scandinavian upper mantle may be caused by processes similar to the ongoing lithospheric stacking in Tibet.

Beschreibung: On 12 September 2007, an Mw 8.4 earthquake occurred within the southern section of the Mentawai segment of the Sumatra subduction zone, where the subduction thrust had previously ruptured in 1833 and 1797. Traveltime data obtained from a temporary local seismic network, deployed between December 2007 and October 2008 to record the aftershocks of the 2007 event, was used to determine two-dimensional (2-D) and three-dimensional (3-D) velocity models of the Mentawai segment. The seismicity distribution reveals significant activity along the subduction interface and within two clusters in the overriding plate either side of the forearc basin. The downgoing slab is clearly distinguished by a dipping region of high Vp (8.0 km/s), which can be a traced to ∼50 km depth, with an increased Vp/Vs ratio (1.75 to 1.90) beneath the islands and the western side of the forearc basin, suggesting hydrated oceanic crust. Above the slab, a shallow continental Moho of less than 30 km depth can be inferred, suggesting that the intersection of the continental mantle with the subducting slab is much shallower than the downdip limit of the seismogenic zone despite localized serpentinization being present at the toe of the mantle wedge. The outer arc islands are characterized by low Vp (4.5–5.8 km/s) and high Vp/Vs (greater than 2.0), suggesting that they consist of fluid saturated sediments. The very low rigidity of the outer forearc contributed to the slow rupture of the Mw 7.7 Mentawai tsunami earthquake on 25 October 2010.

Beschreibung: In the framework of the Dead Sea Integrated Research project (DESIRE), 59 seismological stations were deployed in the region of the Dead Sea Basin. Twenty of these stations recorded data of sufficiently high quality between May and September 2007 to be used for ambient seismic noise analysis. Empirical Green’s functions are extracted from cross-correlations of long term recordings. These functions are dominated by Rayleigh waves, whose group velocities can be measured in the frequency range from 0.1 to 0.5 Hz. Analysis of positive and negative correlation lags of the Green’s functions makes it possible to identify the direction of the source of the incoming energy. Signals with frequencies higher than 0.2 Hz originate from the Mediterranean Sea, while low frequencies arrive from the direction of the Red Sea. Travel times of the extracted Rayleigh waves were measured between station pairs for different frequencies, and tomographically inverted to provide independent velocity models. Four such 2D models were computed for a set of frequencies, all corresponding to different sampling depths, and thus together giving an indication of the velocity variations in 3D extending to a depth of 10 km. The results show low velocities in the Dead Sea Basin, consistent with previous studies suggesting up to 8 km of recent sedimentary infill in the Basin. The complex structure of the western margin of the Basin is also observed, with sedimentary infill present to depths not exceeding 5 km west of the southern part of the Dead Sea. The high velocities associated with the Lisan salt diapir are also observed down to a depth of ~5 km. The reliability of the results is confirmed by checkerboard recovery tests.

Beschreibung: Multibeam bathymetry revealed the occurrence of numerous craterlike depressions, so-called pockmarks, on the sea floor of the Hammerfest Basin and the Loppa High, south-western Barents Sea. To investigate whether these pockmarks are related to ongoing gas seepage, microbial processes associated with methane metabolism were analyzed using geochemical, biogeochemical and microbiological techniques. Gravity cores were collected along transects crossing individual pockmarks, allowing a direct comparison between different locations inside (assumed activity center), on the rim, and outside of a pockmark (reference sites). Concentrations of hydrocarbons in the sediment, particularly methane, were measured as headspace (free) gas, and in the occluded and adsorbed gas fraction. Down to a depth of 2.6 m below sea floor (mbsf) sulfate reduction rates were quantified by radiotracer incubations. Concentrations of dissolved sulfate in the porewater were determined as well. Neither the sulfate profiles nor the gas measurements show any evidence of microbial activity or active fluid venting. Methane concentrations and sulfate reduction rates were extremely low or even below the detection limit. The results show that the observed sediment structures are most likely paleo-pockmarks, their formation probably occurred during the last deglaciation.

Beschreibung: In 2004 and 2005 a passive seismic experiment was carried out in the northern and northeastern part of the Bohemian Massif (Sudetes) to study the lithospheric structure. We present results from Ps and Sp receiver function analyses. With one exception, Moho depth at stations in the northwestern part of the study area varies between 28 and 32 km. Thicker crust up to 35 km was mapped toward the south (Moldanubian unit) and toward the east (Moravo–Silesian and Brunovistulian units) confirming results from previous active seismic measurements. There exists a relatively sharp step in Moho depth between units of the central Sudetes (~ 30 km) and the Moravo–Silesian unit (~ 35 km). The vp/vs ratios inverted from primary and multiple Moho Ps conversions hint for different crustal compositions of the units. Toward the Carpathian thrust we have no clear indications for any crustal root or slab beneath the western Carpathians. However, our data suggests a deepening of the Moho or at least a complicated crust–mantle transition in this area. Additional Ps phases were observed between 6 and 10 s delay time in the Sudetes. These phases cannot be explained by Moho reverberations, but are most probably caused by low velocity zones in the middle crust or lithospheric mantle as shown by modeling of theoretical receiver functions. The stations showing these abnormal phases are located in the area of Permo-Carboniferous basins on probably Teplá–Barrandian crust. Therefore we assume that the phases hint at a mid-crustal low velocity zone between 16 and 20 km depth, which is interpreted as a felsic solidified magma reservoir of the Permo-Carboniferous volcanism beneath the Sudetic Basins. Sp receiver functions show phases with negative polarity at 9 to 12 s lead time on average, which we interpret as lithosphere–asthenosphere boundary at about 80 to 110 km depth.

Beschreibung: The transition between the lithosphere and the asthenosphere is subject to numerous contemporary studies as its nature is still poorly understood. The thickest lithosphere is associated with old cratons and platforms and it has been shown that seismic investigations may fail to image the lithosphere-asthenosphere boundary in these areas. Instead, several recent studies have proposed a mid-lithospheric discontinuity of unknown origin existing under several cratons. In this study we investigate the Tanzania craton in East Africa which is enclosed by the eastern and western branches of the East African Rift System. We present evidence from S receiver functions for two consecutive discontinuities at depths of 50–100 km and 140–200 km, which correspond to significant S wave velocity reductions under the Tanzania craton and the Albert and Edward rift segments. By comparison with synthetic waveforms we show that the lower discontinuity coincides with the LAB exhibiting velocity reductions of 6–9%. The shallower interface reveals a velocity drop that varies from 12% beneath the craton to 24% below the Albert-Edward rift. It is interpreted as an infiltration front marking the upper boundary of altered lithosphere due to ascending asthenospheric melts. This is corroborated by computing S velocity variations based on xenolith samples which exhibit a dense system of crystallized veins acting as pathways of the infiltrating melt. Mineral assemblages in these veins are rich in phlogopite and pyroxenite which can explain the reduced shear wave velocities. Melt infiltration represents a suitable mechanism to form a mid-lithospheric discontinuity within cratonic lithosphere that is underlain by anomalously hot mantle.

Beschreibung: Local earthquake data from a dense temporary seismological network in the southern Dead Sea area have been analysed within the project DESIRE (Dead Sea Integrated Research Project). Local earthquakes are used for the first precise image of the distribution of the P-wave velocity and the vP/vS ratios. 65 stations registered 655 local events within 18 months of observation time. A subset of 530 well-locatable events with 26 730 P- and S-arrival times was used to calculate a tomographic model for the vP and vP/vS distribution. Since the study area is at first-order 2-D, a gradual approach was chosen, which compromised a 2-D inversion followed by a 3-D inversion. The sedimentary basin fill is clearly imaged through high vP/vS ratios and low vP. The basin fill shows an asymmetric structure with average depth of 7 km at the western boundary and depth between 10 and 14 km at the eastern boundary. This asymmetry is reflected by the vertical strike-slip eastern border fault, and the normal faulting at the western boundary, caused by the transtensional deformation within the last 5 Myr. Within the basin fill the Lisan salt diapir is imaged through low vP/vS ratios, reflecting its low fluid content. The extensions were determined to 12 km in E–W and 17 km in N–S direction while its depth is 5–6 km. The thickness of the pre-basin sediments below the basin fill cannot be derived from the tomography data—it is estimated to less than 3 km from former investigations. Below the basin, down to 18 km depth very low P-wave velocities and low vP/vS ratios are observed—most likely caused by fluids from the surrounding crust or the upper mantle.

Beschreibung: We present a series of 1-D shear velocity models for the Sumatran Forearc and Arc derived from Rayleigh wave group dispersion in noise correlation functions from vertical and pressure records from an onshore–offshore seismic deployment. The 1-D models represent the crustal structure of the downgoing Indian Plate, the accretionary prism and the arc. There is a progression in shear velocity across the forearc to the arc associated with thickening of the accretionary prism and the development of an arc crust. The velocity structure inferred for the upper 20 km based on path averages between stations on the accretionary prism has velocities consistent with a thick sediment package in agreement with estimates of depth to the plate boundary determined from active source experiments. We also find low Indian Plate shear velocities, 〈4 km s−1 to 25 km depth beneath our station locations on the downgoing plate. These low seismic velocities are consistent with at least 14–24 per cent serpentinization of the oceanic crust and upper mantle of the downgoing plate. This high degree of serpentinization, may weaken the plate interface and explain the segmentation observed in the great Sumatran thrust earthquakes if the serpentinization is localized. The success of this study suggests that future onshore–offshore seismic deployments will be able to utilize this method.

Beschreibung: Earthquake early warning systems should provide reliable warnings as quickly as possible with a minimum number of false and missed alarms. Wireless meshed networks, coupled with low-cost seismometers for monitoring, evaluation, and information about seismic vibrations in space and time are introducing a new generation of warning infrastructures for mega-cities. The use of a cooperative method for signal analysis makes it possible to distinguish earthquakes (with a certain minimal magnitude) from other ground shaking in a city. The paper gives a short overview of our approach for developing decentralized early warning systems and an evaluation based on experiences gained from model investigations, testbeds in Berlin, and prototype installations in Istanbul.

Beschreibung: Determining the relative orientation of the horizontal components of seismic sensors is a common problem that limits data analysis and interpretation for several acquisition setups, including linear arrays of geophones deployed in borehole installations or ocean bottom seismometers deployed at the seafloor. To solve this problem we propose a new inversion method based on a complex linear algebra approach. Relative orientation angles are retrieved by minimizing, in a least-squares sense, the l2-norm between the complex traces (hodograms) of adjacent pairs of sensors. This methodology can be applied without restrictions only if the wavefield recorded by each pair of sensors is very similar. In most cases, it is possible to satisfy this condition by low-pass filtering the recorded waveforms. The main advantage of our methodology is that, in the complex domain, the relative orientations of seismic sensors can be viewed as a linear inverse problem, which ensures that the preferred solution corresponds to the global minimum of a misfit function. It is also possible to use simultaneously more than one independent data set (other seismic events) to better constrain the solution of the inverse problem. Furthermore, by a computational point of view, our method results faster than the relative orientation methods based on waveform cross-correlation. After several tests on synthetic data sets we applied successfully our methodology to different types of real data. These applications include the alignment of borehole sensors relative to a Vertical Seismic Profiling (VSP) acquisition and the orientation of Ocean Bottom Seismometers (OBS) relative to a neighbouring land station of known orientation. Using land stations, the absolute orientation of OBS can be retrieved. Finally, as a last application, we checked the correct orientation for land stations of a seismological array in Germany.

Beschreibung: While the Dead Sea basin has been studied for a long time, the available knowledge about the detailed seismicity distribution in the area, as well as the deeper structure of the basin, is limited. Therefore, within the framework of the international project DESIRE (DEad Sea Integrated REsearch project), a dense temporary local seismological network was operated in the southern Dead Sea area. We use 530 local earthquakes, having all together 26 730 P- and S-arrival times for a simultaneous inversion of 1-D velocity models, station corrections and precise earthquake locations. Jackknife tests suggest an accuracy of the derived hypocentre locations of about 1 km. Thus, the result is the first clear image of the absolute distribution of the microseismicity of the area, especially in depth. The seismicity is concentrated in the upper crust down to 20 km depth while the lower limit of the seismicity is reached at 31 km depth. The seismic events at the eastern boundary fault (EBF) in the southern part of the study area represent the northward transform motion of the Arabian Plate along the Dead Sea Transform. North of the Boqeq fault the seismic activity represents the transfer of the motion in the pull-apart basin from the eastern to the western boundary. We find that from the surface downward the seismic events are tracing the boundary faults of the basin. The western boundary is mapped down to 12 km depth while the EBF reaches about 17 km depth, forming an asymmetric basin. One fifth of the data set is related to a specific cluster in time and space, which occurred in 2007 February at the western border fault. This cluster is aligned vertically, that is, it is perpendicular to the direction of the dominating left-lateral strike-slip movement at the main transform fault.

Beschreibung: The Maule earthquake of 27th February 2010 (Mw=8.8) affected ~500 km of the Nazca-South America plate boundary in south-central Chile producing spectacular crustal deformation. Here, we present a detailed estimate of static coseismic surface offsets as measured by survey and continuous GPS, both in near- and farfield regions. Earthquake slip along the megathrust has been inferred from a joint inversion of our new data together with published GPS, InSAR, and land-level changes data using Green's functions generated by a spherical finite-element model with realistic subduction zone geometry. The combination of the data sets provided a good resolution, indicating that most of the slip was well resolved. Coseismic slip was concentrated north of the epicenter with up to 16 m of slip, whereas to the south it reached over 10m within two minor patches. A comparison of coseismic slip with the slip deficit accumulated since the last great earthquake in 1835 suggests that the 2010 event closed a mature seismic gap. Slip deficit distribution shows an apparent local overshoot that highlight cycle-to-cycle variability,which has to be taken into accountwhen anticipating future events from interseismic observations. Rupture propagation was obviously not affected by bathymetric features of the incoming plate. Instead, splay faults in the upper plate seem to have limited rupture propagation in the updip and along-strike directions. Additionally, we found that along-strike gradients in slip are spatially correlated with geometrical inflections of the megathrust. Our study suggests that persistent tectonic features may control strain accumulation and release along subduction megathrusts.

Beschreibung: [1] Long-term monitoring of geoelectromagnetic fields, recorded with a network of nine stations covering an area of approximately 25,000 km2at low geomagnetic latitudes in northern Chile, reveals systematic and seasonally modulated variations of geomagnetic field properties. The observed seasonal variation affects almost exclusively the east-west magnetic field component for periods between 100 and 3000 s. The ground-based measurements of magnetic and electric fields show statistically significant coherences with the interplanetary electric field derived from solar wind and interplanetary magnetic field data of the Advanced Composition Explorer satellite. The interplanetary electric field (IEF) penetrates the polar ionosphere from where it propagates toward equatorial latitudes by waveguide transmission, with ionosphere and solid Earth acting as conducting boundaries. Signal coherence between IEF and ground data peaks at periods of approximately 90 min and up to the four harmonics. Coherence values reach 0.4 at these periods and depend on the electromagnetic field component. They vary with season and local time. Transfer functions computed between IEF and ground-based electric and magnetic fields show local maxima at similar periods (90 min and harmonics). The coupling between the east-west magnetic field component and the IEF shows significant seasonal variability, much larger than the other electromagnetic field components. We conclude that the IEF drives primarily a global circuit of Pedersen currents in the ionosphere. Resulting time-varying magnetic fields induce electric currents in the ground. Related ground-based magnetic (primarily north-south) and electric (primarily east-west) signals vary coherently at all local times and seasons. Conversely, magnetic signals caused by the IEF-driven Hall currents depend much on local time and season. We show for the first time that these ionospheric Hall currents cause no induction in the ground, but they generate magnetic signatures that are confined to the waveguide between ionosphere and Earth's surface.

Beschreibung: Splay faults are thrusts that emerge from the plate boundaries of subduction zones. Such structures have been mapped at several convergent margins and their activity commonly ascribed to large megathrust earthquakes. However, the behavior of splay faults during the earthquake cycle is poorly constrained because typically these structures are located offshore and are difficult to access. Here we use geologic mapping combined with space and land geodesy, as well as offshore sonar data, to document surface-fault ruptures and coastal uplift at Isla Santa María in south-central Chile (37°S) caused by the 27 February 2010 Maule earthquake (Mw 8.8). During the earthquake, the island was tilted parallel to the margin, and normal faults ruptured the surface and adjacent ocean bottom. We associate tilt and crestal normal faulting with growth of an anticline above a blind reverse fault rooted in the Nazca–South America plate boundary, which slipped during the Maule earthquake. The splay fault system has formed in an area of reduced coseismic plate-boundary slip, suggesting that anelastic deformation in the upper plate may have restrained the 2010 megathrust rupture. Surface fault breaks were accompanied by prominent discharge of fluids. Our field observations support the notion that splay faulting may frequently complement and influence the rupture of subduction-zone earthquakes.

Beschreibung: Rapid estimation of earthquake rupture propagation is essential to declare an early warning for tsunami-generating earthquakes. An increasing number of seismological methods have been developed to determine rupture parameters, such as length, velocity and propagation direction, especially since the occurrence of the Sumatra–Andaman earthquake that resulted in a devastating tsunami in the Indian Ocean region. Here, we present a new method to follow the rupture process in near real time by a polarization analysis of local and regional P phases that permits a faster determination of rupture properties than using teleseismic records. The new technique has the capability to provide detailed information in less than 10 min. Originally, the method stems from a single-station earthquake location method and is expanded here to monitor P-phase polarization variations through time. As the earthquake source moves away from the hypocentre, the backazimuth of an incoming P phase is expected to change accordingly. With polarization analysis we may be able to monitor the temporal change in Pwave backazimuth to follow the rupture process in near real time. Three component P phases are scanned to determine the azimuthal variation as a function of time. The backazimuth of a moving rupture front is determined by the first eigenvector of the covariance matrix. The linearity of the particle motion is used as a measure of the quality of the data. Seismic stations at local and regional distances (〉∼ 30◦) are used. We tested the new method with a theoretical simulation and observed seismograms of the Sumatra–Andaman earthquake (2004 December 26, Mw = 9.3), and we were able to follow the rupture for the first 200 s. For larger ruptures, stations at more than 30◦ epicentral distances would be required. The method is also successfully applied to the Wenchuan earthquake (2008 May 12, Mw = 8.0).

Beschreibung: Lithium elemental and isotopic compositions of 33 glass and whole-rock samples from nine oceanic island regions were determined to characterize the Li inventory of the deep mantle. The Li contents of the investigated lavas range from 1·5 to 13·3 μg g−1, whereas δ7Li ranges from 2·4 to 4·8‰. There are weak co-variations between the Li/Y, δ7Li, and Sr–Nd–Pb isotope compositions of the lavas, indicating that the Li elemental and isotopic characteristics of ocean island basalt to some extent reflect mantle source heterogeneity. In detail, HIMU-type lavas are characterized by δ7Li values (up to 4·8‰) slightly heavier than those for average normal mid-ocean ridge basalt (3·4 ± 1·4‰) and by comparatively low Li contents; EM1-type lavas are characterized by isotopically light Li (average 3·2‰) and relative Li enrichment, whereas EM2-type lavas tend to heavier δ7Li values (up to 4·4‰) with high Li concentrations. The Li contents and isotope characteristics of HIMU-type lavas are consistent with recycling of altered and dehydrated oceanic crust, whereas those of the EM1-type lavas can be attributed to sediment recycling. The Li characteristics of EM2-type lavas may reflect reworking of mantle wedge material that has been infiltrated by fluids derived from the subducting plate.

Beschreibung: We report on a rare example of aseismic response of a creeping fault to the earthquake cycle of a nearby megathrust. Interferometric synthetic aperture radar (InSAR) is used to detect and analyze shallow creep of two crustal faults at Mejilones Peninsula, Northern Chile, located in the hanging wall of the 2007 Mw 7.7 Tocopilla subduction earthquake. We generate two independent time series of surface deformation spanning ∼3.5 yr of late interseismic and ∼1.5 yr early postseismic deformation associated with this event. The analysis reveals creep on the Mejillones fault as well as on a previously unmapped fault to the west of the Mejillones fault. The InSAR deformation maps and distributed slip models obtained from the data reveal that fault creep reversed between the interseismic and postseismic periods. Given the regional stress field perturbations due to interseismic and coseismic deformation, we argue that the observed shallow creep and its slip reversal are directly linked to the megathrust seismic cycle. Moreover, from similar eastward dips but opposite slip directions of the two faults, we infer that fault strength must be very low and that the kinematics is controlled by crustal flexure associated with the seismic cycle on the underlying megathrust. ⺠New evidence of crustal fault creep in Northern Chile from InSAR. ⺠New evidence that sense of fault creep is governed by megathrust earthquake cycles. ⺠New evidence that stress induced by megathrust earthquake alters the sense of creep.

Beschreibung: The combination of the Sunda megathrust and the (strike-slip) Sumatran Fault (SF) represents a type example of slip-partitioning. However, superimposed on the SF are geometrical irregularities that disrupt the local strain field. The largest such feature is in central Sumatra where the SF splits into two fault strands up to 35 km apart. A dense local network was installed along a 350 km section around this bifurcation, registering 1016 crustal events between April 2008 and February 2009. 528 of these events, with magnitudes between 1.1 and 6.0, were located using the double-difference relative location method. These relative hypocentre locations reveal several new features about the crustal structure of the SF. Northwest and southeast of the bifurcation, where the SF has only one fault strand, seismicity is strongly focused below the surface trace, indicating a vertical fault that is seismogenic to ~15 km depth. By contrast intense seismicity is observed within the bifurcation, displaying streaks in plan and cross-section that indicate a complex system of faults bisecting the bifurcation. In combination with analysis of topography and focal mechanisms, we propose that the bifurcation is a strike-slip duplex system with complex faulting between the two main fault branches.

Beschreibung: In 2007 a M7.7 earthquake occurred near the town of Tocopilla within the northern Chile seismic gap. Mainshock slip, derived from coseismic surface deformation, was confined to the depth range between 30-55 km. We relocated ~1100 events during six months before and one week after the mainshock. Aftershock seismicity is first congruent to the mainshock slip and then it spreads offshore west and northwest of Mejillones Peninsula (MP). Waveform modeling for 38 aftershocks reveals source mechanisms that are in the majority similar to the mainshock. However, a few events appear to occur in the upper plate, some with extensional mechanisms. Juxtaposing the Tocopilla aftershocks with those following the neighboring 1995 Antofagasta earthquake produces a striking symmetry across an EW axis in the center of MP. Events seem to skirt around MP, probably due to a shallower Moho there. We suggest that the seismogenic coupling zone in northern Chile changes its frictional behavior in the down-dip direction from unstable to mostly conditionally stable. For both earthquake sequences, aftershocks agglomerate in the conditionally stable region, whereas maximum inter-seismic slip deficit and co-seismic slip occurs in the unstable region. The boundary between the unstable and conditionally stable zones parallels the coastline. We identify a similar segmentation for other earthquakes in Chile and Peru, where the offshore segments break in great M〉8 earthquakes, and the onshore segments in smaller M〈8 earthquakes. Using critical taper analysis, we demonstrate a causal relationship between varying slip behavior on the interface and forearc wedge anatomy that can be attributed to spatial variations in the rate-dependency of friction.

Beschreibung: Results obtained from S and P receiver functions produced a clear image of the top and bottom of the subducting Nazca lithosphere beneath northern Chile. Using data from the teleseismic events recorded at 15 permanent Integrated Plate Boundary Observatory Chile (IPOC) stations, we obtained new constraints on the geometry and thickness of the descending Nazca lithosphere. We observed the subducted crust of the Nazca plate at depths ranging from 50 km beneath the Coastal Cordillera down to 110 km beneath the Western Cordillera. We found significant along‐strike variations in the geometry of the Nazca plate beneath northern Chile. On closer inspection, it appears that the oceanic Nazca plate is divided into two distinct segments as it descends beneath the continental South American plate. The transition from the relatively steeper (∼23°) and deeper slab to the north of 21°S to the flatter southern segment (∼19°) is shown reasonably clearly by our data. This feature could well be associated with variations in the curvature of the plate margin and the geometry of the Chile trench, which is mainly curved to the north of 21°S. We have also mapped the continental Moho of the South American plate at depths ranging between 60 and 70 km to the east of the Longitudinal Valley. Beneath the Coastal Cordillera, this boundary becomes invisible, probably due to the serpentinization of the forearc mantle wedge that reduces the velocity in the uppermost mantle. The base of the subducted Nazca plate was clearly identified as a sharp boundary in the results obtained from the P and S receiver functions. The thickness of the subducted oceanic Nazca plate, which has an age of ∼50 My, is estimated to be ∼50 km. Although this thickness is consistent with that predicted by thermal gradients, the explanation of the sharpness of the lithosphere‐asthenosphere boundary may require another mechanism such as hydration or melting.

Beschreibung: An early detection of the presence of rupture directivity plays a major role in the correct estimation of ground motions and risks associated to the earthquake occurrence. We present here a simple method for a fast detection of rupture directivity, which may be additionally used to discriminate fault and auxiliary planes and have first estimations of important kinematic source parameters, such as rupture length and rupture time. Our method is based on the inversion of amplitude spectra from P-wave seismograms to derive the apparent duration at each station and on the successive modelling of its azimuthal behaviour. Synthetic waveforms are built assuming a spatial point source approximation, and the finite apparent duration of the spatial point source is interpreted in terms of rupture directivity. Since synthetic seismograms for a point source are calculated very quickly, the presence of directivity may be detected within few seconds, once a focal mechanism has been derived. The method is here first tested using synthetic datasets, both for linear and planar sources, and then successfully applied to recent Mw 6.2–6.8 shallow earthquakes in Peloponnese, Greece. The method is suitable for automated application and may be used to improve kinematic waveform modelling approaches.

Beschreibung: On 2001 May 7, following unintentional water injection, a moderate size induced earthquake struck the Ekofisk oil field, North Sea. Despite of its relatively moderate magnitude, clear low-frequency waveforms could be recorded up to more than 2000 km epicentral distance, suggesting a slow rupture at very shallow depth and wave propagation through low-velocity shallow structures. The event poses a rare opportunity to constrain rupture velocity, duration and rise time of a superficial M 〉 4 event occurring on a horizontal plane in soft, water-saturated sediments. Two previous studies discussed the earthquake point source finding vertical dip-slip focal mechanisms with opposite senses of P and T axes. A further investigation was thus required to provide a basis for a deeper discussion of the failure dynamics. We significantly improve the used data set, test different earth models and derive a point source as well as a kinematic rupture model. We carefully discuss parameter uncertainties and effects related to shallow sources and wave propagation through different crustal structures to resolve the previous controversy. We additionally provide a kinematic rupture model, based on apparent source times derived from Rayleigh and Love waves. The waveforms resolve a predominant unilateral rupture along a horizontal plane at about 2 km depth. We derive an unusually slow rupture, consequence of a slow rupture velocity of about 500 m s –1 and a long rise time of about 7 s. An independent modelling of GPS- based static displacements allows to confirm the focal mechanism polarity and to locate the centroid at the eastern side of the field, resulting in a much larger seismic moment in comparison with dynamic seismic moment. The rupture directivity is confirmed by the relative location of the centroid with respect to the epicentre, which is set at the site of water injection.

Beschreibung: The Dead Sea Transform (DST) is a major left-lateral strike-slip fault that accommodates the relative motion between the African and Arabian plates, connecting a region of extension in the Red Sea to the Taurus collision zone in Turkey over a length of about 1100 km. The Dead Sea Basin (DSB) is one of the largest basins along the DST. The DSB is a morphotectonic depression along the DST, divided into a northern and a southern sub-basin, separated by the Lisan salt diapir. We report on a receiver function study of the crust within the multidisciplinary geophysical project, DEad Sea Integrated REsearch (DESIRE), to study the crustal structure of the DSB. A temporary seismic network was operated on both sides of the DSB between 2006 October and 2008 April. The aperture of the network is approximately 60 km in the E—W direction crossing the DSB on the Lisan peninsula and about 100 km in the N—S direction. Analysis of receiver functions from the DESIRE temporary network indicates that Moho depths vary between 30 and 38 km beneath the area. These Moho depth estimates are consistent with results of near-vertical incidence and wide-angle controlled-source techniques. Receiver functions reveal an additional discontinuity in the lower crust, but only in the DSB and west of it. This leads to the conclusion that the internal crustal structure east and west of the DSB is different at the present-day. However, if the 107 km left-lateral movement along the DST is taken into account, then the region beneath the DESIRE array where no lower crustal discontinuity is observed would have lain about 18 Ma ago immediately adjacent to the region under the previous DESERT array west of the DST where no lower crustal discontinuity is recognized.

Beschreibung: We analyse data from seismic stations surrounding the Alboran Sea between Spain and North Africa to constrain variations of the lithosphere–asthenosphere boundary (LAB) in the region. The technique used is the receiver function technique, which uses S-to-P converted teleseismic waves at the LAB below the seismic stations. We confirm previous data suggesting a shallow (60–90 km) LAB beneath the Iberian Peninsula and we observe a similarly shallow LAB beneath the Alboran Sea where the lithosphere becomes progressively thinner towards the east. A deeper LAB (90–100 km) is observed beneath the Betics, the south of Portugal and Morocco. The structure of the LAB in the entire region does not seem to show any indication of subduction related features. We also observe good P receiver function signals from the seismic discontinuities at 410 and 660 km depth which do not indicate any upper-mantle anomaly beneath the entire region. This is in agreement with the sparse seismic activity in the mantle transition zone suggesting the presence of only weak and regionally confined anomalies.

Beschreibung: We implement the effects of gravitational self-attraction and loading (SAL) into a global baroclinic ocean circulation model and investigate effects on sea level patterns, ocean circulation, and density distributions. We compute SAL modifications as an additional force on the water masses at every time step by decomposing the field of ocean bottom pressure anomalies into spherical harmonic functions and then applying Love numbers to account for the elastic properties of the solid Earth. Considering SAL in the postprocessing turns out to be insufficient, especially in coastal waters and on subweekly time scales, where SAL modifies local sea level by around 0.6–0.8 cm on average; in the open ocean, changes mostly remain around 0.3 cm. Modifications of water velocities as well as of heat and salt distributions are modeled, yet they are small. Simple parameterizations of SAL effects currently used in a number of ocean circulation models suffer from the process's inhomogeneity in space and time. These parameterizations improve the modeled sea level patterns but fail to reproduce SAL impacts on circulation and density distributions. We therefore suggest to explicitly consider the full SAL effect in ocean circulation models, especially when investigating sea level variations faster than around 4 days.

Beschreibung: Frequent landsliding is one of the greatest natural hazards facing the inhabitants of Central Asia's Fergana Basin and the surrounding mountain ranges. Active tectonics in the region is rapidly building the Tien Shan, one of the highest mountain ranges on Earth, and the extreme topographic relief promotes frequent landslide activity, which causes major losses of life and property. In southwestern Kyrgyzstan alone, on average 10 people die and seven houses are destroyed each year in these sudden and rapidly moving landslides.

Beschreibung: Structural features of volcanic and hydrothermal systems can be used to infer the location of magma chambers or productive geothermal areas. The Hengill volcanic triple-junction complex has a well-developed geothermal system, which is being exploited to extract hot fluids that are used for electrical power and heat production. In the framework of the I-GET project, a 4-month temporary seismological network including seven high-dynamic broadband instruments was deployed and 1D transient electromagnetic soundings (TEM) and 3D magnetotelluric (MT) surveys were performed to improve the understanding of the relationships between structural features, seismic activity and fluid production at the Hengill geothermal system. The MT and TEM data set are analysed elsewhere. The analysis of the seismological data set allowed the detection and classification of more than 600 earthquakes, among which long-period (LP) earthquakes were observed for the first time in this area. This work focuses first on a joint inversion for the 3D velocity structure and determination of the locations of the hypocentres from about 250 local volcano-tectonic earthquakes with clear P- and S-wave arrival times. The results confirm those from earlier tomography studies in this area. Integrating the seismic velocity and resistivity models in a semi-quantitative approach by cross-plotting the resistivity model with the velocity ratio VP/VS delineates a structural body with a high seismic velocity ratio and low resistivity that is interpreted as the main heat source of the geothermal system.

Beschreibung: We examine shear-wave splitting of SKS waveforms collected by a temporary array of 68 stations in the region of the Dead Sea basin. The observed splitting parameters exhibit systematic variations along a dense, EW-trending 60 km profile across the basin. The delay times vary significantly between 1.0 and 2.8 seconds with smaller values in the very center of the profile. The fast polarizations are oriented more-or-less parallel to the strike of the Dead Sea transform fault and vary between −10 and 20 degrees with respect to North. Finite-frequency waveform modeling reveals that the source-region of the small-scale lateral variations is likely located within the crust. The modeling further shows that purely isotropic velocity variations affect shear-wave splitting: To a large degree, the observed variations of splitting parameters can be explained by the sedimentary fill of the basin and its low isotropic seismic velocities, whereas the mantle is uniformly anisotropic. Our study indicates that precaution must be taken when interpreting short-scale lateral variations of shear wave splitting in terms of anisotropic structures in the crust or upper mantle.

Beschreibung: In the past decade the analysis of seismic noise has become an efficient tool to recover the Green's function between pairs of receivers by cross-correlation of seismic traces. Most studies focus on the investigation of the surface wave component of the ambient noise. Several attempts to recover the body wave part of the Green's function have been documented. In this paper I present the results of cross-correlation of seismic noise and the retrieval of refracted and reflected P-waves along a seismic line in the Karoo region (Republic of South Africa). Body wave refractions (direct phases) and reflections have been observed in the Green's functions derived from ambient noise records of up to 60 hours. The results are compared with shot gathers from a controlled source experiment (borehole explosions), carried out along the same line. The significant potential of ambient noise analysis, especially with respect to P-wave reflections will be shown and discussed.

Beschreibung: We use Global Positioning System (GPS) velocities and kinematic Finite Element models (FE-models) to infer the state of locking between the converging Nazca and South America plates in South-Central Chile (36[degree sign]S - 46[degree sign]S) and to evaluate its spatial and temporal variability. GPS velocities provide information on earthquake-cycle deformation over the last decade in areas affected by the megathrust events of 1960 (Mw= 9.5) and 2010 (Mw= 8.8). Our data confirm that a change in surface velocity patterns of these two seismotectonic segments can be related to their different stages in the seismic cycle: Accordingly, the northern (2010) segment was in a final stage of interseismic loading whereas the southern (1960) segment is still in a postseismic stage and undergoes a prolonged viscoelastic mantle relaxation. After correcting the signals for mantle relaxation, the residual GPS velocity pattern suggests that the plate interface accumulates slip deficit in a spatially and presumably temporally variable way towards the next great event. Though some similarity exist between locking and 1960 coseismic slip, extrapolating the current, decadal scale slip deficit accumulation towards the ~ 300-yr recurrence times of giant events here does neither yield the slip distribution nor the moment magnitude of the 1960 earthquake. This suggests that either the locking pattern is evolving in time (to reconcile a slip deficit distribution similar to the 1960 earthquake) or that some asperities are not persistent over multiple events. The accumulated moment deficit since 1960 suggests that highly locked patches in the 1960 segment are already capable of producing a M ~ 8 event if triggered to fail by stress transfer from the 2010 event.

Beschreibung: The western Bohemian Massif is known for geodynamic phenomena such as earthquake swarms, CO2 dominated free gas emanations of upper-mantle origin, and Tertiary/ Quaternary volcanism. Among other explanations, a small-scale mantle plume has been suggested. We used data from the international passive seismic experiment BOHEMA (2001-2004) and of a previous seismic experiment to investigate the structure of the upper-mantle discontinuities at 410 km and 660 km depth (the ‘410’ and the ‘660’) beneath the Bohemian Massif with the P receiver function method. More than 4500 high-quality receiver function traces could be utilized. Two stacking techniques were used: stacking by station (common station method, CSM) and stacking by piercing points in the mantle transition zone (common conversion point method, CCM). Since the station spacing is very close, rays from different stations have similar piercing points in the mantle transition zone. Therefore CCM is sensitive in the transition zone and CSM is sensitive to the uppermost structure of the mantle. The CSM shows delayed conversion times from the 410 km discontinuity beneath the western Bohemia earthquake region, which indicate a slow uppermost mantle. When stacking our data by CCM, we observe thickening of the transition zone towards the Alpine foreland, which agrees with tomographic results by Piromallo and Morelli. The thickness of the mantle transition zone beneath the western Bohemian Massif is normal, with a faint hint to thinning in the northern part. Our conclusion is that a plume-like structure may exist in the upper mantle below the western Bohemia earthquake region, but with no or only weak imprint on the 410 km discontinuity.

Beschreibung: In this receiver function study, we investigate the structure of the crust beneath six seismic broadband stations close to the Sunda Arc formed by subduction of the Indo-Australian under the Sunda plate. We apply three different methods to analyse receiver functions at single stations. A recently developed algorithm determines absolute shear-wave velocities from observed frequency-dependent apparent incidence angles of P waves. Using waveform inversion of receiver functions and a modified Zhu and Kanamori algorithm, properties of discontinuities such as depth, velocity contrast, and sharpness are determined. The combination of the methods leads to robust results. The approach is validated by synthetic tests. Stations located on Malaysia show high-shear-wave velocities (V S) near the surface in the range of 3.4–3.6 km s − 1 attributed to crystalline rocks and 3.6–4.0 km s − 1 in the lower crust. Upper and lower crust are clearly separated, the Moho is found at normal depths of 30–34 km where it forms a sharp discontinuity at station KUM or a gradient at stations IPM and KOM. For stations close to the subduction zone (BSI, GSI and PSI) complexity within the crust is high. Near the surface low V S of 2.6–2.9 km s − 1 indicate sediment layers. High V S of 4.2 km s − 1 are found at depth greater than 6 and 2 km at BSI and PSI, respectively. There, the Moho is located at 37 and 40 km depth. At station GSI, situated closest to the trench, the subducting slab is imaged as a north-east dipping structure separated from the sediment layer by a 10 km wide gradient in V S between 10 and 20 km depth. Within the subducting slab V S ≈ 4.7 km s − 1. At station BSI, the subducting slab is found at depth between 90 and 110 km dipping 20° ± 8° in approximately N 60° E. A velocity increase in similar depth is indicated at station PSI, however no evidence for a dipping layer is found.

Beschreibung: The Sumatra-Andaman earthquake with a magnitude of 9.3, and the subsequent destructive tsunami which caused more than 225 000 fatalities in the region of the Indian Ocean, happened on 26 December 2004. Less than one month later, the United Nations (UN) World Conference on Disaster Reduction took place in Kobe, Japan to commemorate the 1995 Kobe earthquake. The importance of preparedness and awareness on regional, national and community levels with respect to natural disasters was discussed during this meeting, and resulted in the approval of the Hyogo Declaration on Disaster Reduction. Based on this declaration the UN mandated the Intergovernmental Oceanographic Commission (IOC) of UNESCO (United Nations Education, Science and Cultural Organization), taking note of its over 40 years of successful coordination of the Pacific Tsunami Warning System (PTWC), to take on the international coordination of national early-warning efforts for the Indian Ocean and to guide the process of setting up a Regional Tsunami Early Warning System for the Indian Ocean.

Beschreibung: Rapid improvements in telemetry technology and the general decrease in communication costs have raised a growing interest in low-cost wireless sensing units. This is especially the case for structural monitoring purposes, where they are becoming a more valuable alternative to conventional wired monitoring system. The main advantages associated with the use of wireless sensing unit include a considerable decrease in installation costs, decentralization of data analysis, and the possibility of broadening the functional capabilities by exploiting the use, at the same time and place, of different sensors. In this work, the design of a low-cost wireless sensing unit able both to collect, analyze, store, and communicate data and estimated parameters is presented. The suitability of a network of these low-cost wireless instruments for monitoring the vibration characteristics and dynamic properties of strategic civil infrastructures is validated during a ambient vibration recording field test on the Fatih Sultan Mehmet Bridge in Istanbul, Turkey.

Beschreibung: We determined a high-resolution 3-D S-wave velocity model for a 26 km × 12 km area in the northern part of the basin of Santiago de Chile. To reach this goal, we used microtremor recordings at 125 sites for deriving the horizontal-to-vertical (H/V) spectral ratios that we inverted to retrieve local S-wave velocity profiles. In the inversion procedure, we used additional geological and geophysical constraints and values of the thickness of the sedimentary cover already determined by gravimetric measurements, which were found to vary substantially over short distances in the investigated area. The resulting model was derived by interpolation with a kriging technique between the single S-wave velocity profiles and shows locally good agreement with the few existing velocity profile data, but allows the entire area, as well as deeper parts of the basin, to be represented in greater detail. The wealth of available data allowed us to check if any correlation between the S-wave velocity in the uppermost 30 m (v30S) and the slope of topography, a new technique recently proposed by Wald and Allen, exists on a local scale. We observed that while one lithology might provide a greater scatter in the velocity values for the investigated area, almost no correlation between topographic gradient and calculated v30S exists, whereas a better link is found between v30S and the local geology. Finally, we compared the v30S distribution with the MSK intensities for the 1985 Valparaiso event, pointing out that high intensities are found where the expected v30S values are low and over a thick sedimentary cover. Although this evidence cannot be generalized for all possible earthquakes, it indicates the influence of site effects modifying the ground motion when earthquakes occur well outside of the Santiago basin.

Beschreibung: A series of linked marine and land studies have recently targeted the Sumatra subduction zone, focusing on the 2004 and 2005 plate boundary earthquake ruptures in Indonesia. A collaborative research effort by scientists from the United Kingdom (UK Sumatra Consortium), Indonesia, United States, France, and Germany is focusing on imaging the crustal structure of the margin to examine controls on along-strike and updip earthquake rupture propagation. The fundamental science objective is to examine how margin architecture and properties control earthquake rupture location and propagation.

Beschreibung: Ambient noise tomography is applied to the significant data resources now available across Tibet and surrounding regions to produce Rayleigh wave phase speed maps at periods between 6 and 50 s. Data resources include the permanent Federation of Digital Seismographic Networks, five temporary U.S. Program for Array Seismic Studies of the Continental Lithosphere (PASSCAL) experiments in and around Tibet, and Chinese provincial networks surrounding Tibet from 2003 to 2009, totaling ∼600 stations and ∼150,000 interstation paths. With such a heterogeneous data set, data quality control is of utmost importance. We apply conservative data quality control criteria to accept between ∼5000 and ∼45,000 measurements as a function of period, which produce a lateral resolution between 100 and 200 km across most of the Tibetan Plateau and adjacent regions to the east. Misfits to the accepted measurements among PASSCAL stations and among Chinese stations are similar, with a standard deviation of ∼1.7 s, which indicates that the final dispersion measurements from Chinese and PASSCAL stations are of similar quality. Phase velocities across the Tibetan Plateau are lower, on average, than those in the surrounding nonbasin regions. Phase velocities in northern Tibet are lower than those in southern Tibet, perhaps implying different spatial and temporal variations in the way the high elevations of the plateau are created and maintained. At short periods (〈20 s), very low phase velocities are imaged in the major basins, including the Tarim, Qaidam, Junggar, and Sichuan basins, and in the Ordos Block. At intermediate and long periods (〉20 s), very high velocities are imaged in the Tarim Basin, the Ordos Block, and the Sichuan Basin. These phase velocity dispersion maps provide information needed to construct a 3-D shear velocity model of the crust across the Tibetan Plateau and surrounding regions.

Beschreibung: The magnitude-8.8 Maule (Chile) earthquake of 27 February 2010 ruptured a segment of the Andean subduction zone megathrust that has been suspected to be of high seismic potential1,2,3,4,5,6. It is the largest earthquake to rupture a mature seismic gap in a subduction zone that has been monitored with a dense space-geodetic network before the event. This provides an image of the pre-seismically locked state of the plate interface of unprecedentedly high resolution, allowing for an assessment of the spatial correlation of interseismic locking with coseismic slip. Pre-seismic locking might be used to anticipate future ruptures in many seismic gaps6,7,8,9,10,11,12, given the fundamental assumption that locking and slip are similar. This hypothesis, however, could not be tested without the occurrence of the first gap-filling earthquake. Here we show evidence that the 2010 Maule earthquake slip distribution correlates closely with the patchwork of interseismic locking distribution as derived by inversion of global positioning system (GPS) observations during the previous decade. The earthquake nucleated in a region of high locking gradient and released most of the stresses accumulated in the area since the last major event in 1835. Two regions of high seismic slip (asperities) appeared to be nearly fully locked before the earthquake. Between these asperities, the rupture bridged a zone that was creeping interseismically with consistently low coseismic slip. The rupture stopped in areas that were highly locked before the earthquake but where pre-stress had been significantly reduced by overlapping twentieth-century earthquakes. Our work suggests that coseismic slip heterogeneity at the scale of single asperities should indicate the seismic potential of future great earthquakes, which thus might be anticipated by geodetic observations.

Beschreibung: For the first time, ambient noise tomography is used to clearly image the magma chamber beneath Lake Toba caldera, one of the largest Quaternary calderas on Earth. Using data from 40 seismic stations deployed between May and October 2008 around Lake Toba, empirical Green's functions are extracted from long term cross-correlations of continuous records. These functions are dominated by Rayleigh waves, whose group velocities can be measured in the period range from 2.5 to 12 seconds. Arrival times of these waves are picked for a given period and inverted using 2-D tomography to calculate lateral variations in velocity for the given period. This was done for six different periods, which all correspond to different sampling depths. Thus the six 2-D models presented together provide information on velocity variations with depth. The results show a low-velocity body coincident with the Lake Toba caldera, representing the magma chamber under the volcano. The chamber is observed to have a complex 3-D geometry, with at least two separate sub-chambers underlying the caldera. Other results include a deep low velocity body, possibly another magma chamber, south west of the lake with an upper limit of ∼7 km depth. The maximum depth to which this body reaches could not be resolved. The Sumatra Fault marks a velocity contrast, but only down to depths not greater than 5 km. The reliability of the results was further confirmed by checkerboard recovery tests.

Beschreibung: We investigate microseismic activity at the convergent plate boundary of the Hellenic subduction zone on- and offshore south-eastern Crete with unprecedented precision using recordings from an amphibian seismic network. The network configuration consisted of up to eight ocean bottom seismometers as well as five temporary short-period and six permanent broadband stations on Crete and surrounding islands. More than 2,500 local and regional events with magnitudes up to M L = 4.5 were recorded during the time period July 2003–June 2004. The magnitude of completeness varies between 1.5 on Crete and adjacent areas and increases to 2.5 in the vicinity of the Strabo trench 100 km south of Crete. Tests with different localization schemes and velocity models showed that the best results were obtained from a probabilistic earthquake localization using a 1-D velocity model and corresponding station corrections obtained by simultaneous inversion. Most of the seismic activity is located offshore of central and eastern Crete and interpreted to be associated with the intracrustal graben system (Ptolemy and Pliny trenches). Furthermore, a significant portion of events represents interplate seismicity along the NNE-ward dipping plate interface. The concentration of seismicity along the Ptolemy and Pliny trenches extends from shallow depths down to the plate interface and indicates active movement. We propose that both trenches form transtensional structures within the Aegean plate. The Aegean continental crust between these two trenches is interpreted as a forearc sliver as it exhibits only low microseismic activity during the observation period and little or no internal deformation. Interplate seismicity between the Aegean and African plates forms a 100-km wide zone along dip from the Strabo trench in the south to the southern shore-line of Crete in the north. The seismicity at the plate contact is randomly distributed and no indications for locked zones were observed. The plate contact below and north of Crete shows no microseismic activity and seems to be decoupled. The crustal seismicity of the Aegean plate in this area is generally confined to the upper 20 km in agreement with the idea of a ductile deformation of the lower crust caused by a rapid return flow of metamorphic rocks that spread out below the forearc. In the region of the Messara half-graben at the south coast of central Crete, a southward dipping seismogenic structure is found that coalesces with the seismicity of the Ptolemy trench at a depth of about 20 km. The accretionary prism south of Crete indicated by the Mediterranean Ridge showed no seismic activity during the observation period and seems to be deforming aseismically.

Beschreibung: The Mw = 9.3 Sumatra earthquake of 26 December 2004 generated a tsunami that affected the entire Indian Ocean region and caused approximately 230 000 fatalities. In the response to this tragedy the German government funded the German Indonesian Tsunami Early Warning System (GITEWS) Project. The task of the GEOFON group of GFZ Potsdam was to develop and implement the seismological component. In this paper we describe the concept of the GITEWS earthquake monitoring system and report on its present status. The major challenge for earthquake monitoring within a tsunami warning system is to deliver rapid information about location, depth, size and possibly other source parameters. This is particularly true for coast lines adjacent to the potential source areas such as the Sunda trench where these parameters are required within a few minutes after the event in order to be able to warn the population before the potential tsunami hits the neighbouring coastal areas. Therefore, the key for a seismic monitoring system with short warning times adequate for Indonesia is a dense real-time seismic network across Indonesia with densifications close to the Sunda trench. A substantial number of supplementary stations in other Indian Ocean rim countries are added to strengthen the teleseismic monitoring capabilities. The installation of the new GITEWS seismic network – consisting of 31 combined broadband and strong motion stations – out of these 21 stations in Indonesia – is almost completed. The real-time data collection is using a private VSAT communication system with hubs in Jakarta and Vienna. In addition, all available seismic real-time data from the other seismic networks in Indonesia and other Indian Ocean rim countries are acquired also directly by VSAT or by Internet at the Indonesian Tsunami Warning Centre in Jakarta and the resulting "virtual" network of more than 230 stations can jointly be used for seismic data processing. The seismological processing software as part of the GITEWS tsunami control centre is an enhanced version of the widely used SeisComP software and the well established GEOFON earthquake information system operated at GFZ in Potsdam (http://geofon.gfz-potsdam.de/db/eqinfo.php). This recently developed software package (SeisComP3) is reliable, fast and can provide fully automatic earthquake location and magnitude estimates. It uses innovative visualization tools, offers the possibility for manual correction and re-calculation, flexible configuration, support for distributed processing and data and parameter exchange with external monitoring systems. SeisComP3 is not only used for tsunami warning in Indonesia but also in most other Tsunami Warning Centres in the Indian Ocean and Euro-Med regions and in many seismic services worldwide.

Beschreibung: We analyse broad-band SS waveformdata recorded by several networks in Europe with sources mainly in the west Pacific to study the underside reflections of teleseismic SS waves in the lithosphere and the upper mantle beneath eastern Asia and the NW Pacific ocean. SS bounce points sample a corridor from the Aleutian, Kamchatka and Japan subduction zones through the North China Craton and Central Asian Orogenic Belt to the Tibetan plateau. The corridor passes through different tectonic units such as subduction zones, an old continental shield, a fold belt and a high plateau. We investigate the seismic structure of the lithosphere and the mantle transition zone beneath the different geotectonic units along the profile and infer the correlation of geodynamic processes at different depths.We explore the short period frequency content in the SS waveform data and use moveout correction and common midpoint stack to acquire profiles with high lateral and depth resolution from the crust to the mantle transition zone. Clear SS precursors of the 410 and 660 km discontinuities show the effects of the interaction between the subducted oceanic lithosphere and the mantle transition zone beneath the NW Pacific subduction zones. A low-velocity layer has also been detected beneath the 410 km discontinuity and can be traced along the entire profile. Due to the improved resolution acquired by the method presented here we have been able to study the shallower structures such as the Moho and the lithosphere–asthenosphere boundary by SS precursors. The continental Moho can be clearly seen along this corridor. The depth variation agrees well with earlier receiver function results. We also see negative reflectors along the profile at varying depths, which can be interpreted as the lithosphere–asthenosphere boundary.

Beschreibung: S receiver functions obtained from seismograms of teleseismic events recorded at 78 European permanent broad-band stations are used to estimate the thickness of the European lithosphere. Our results provide new, independent information about the lithospheric thickness beneath the Precambrian platform of Eastern Europe and the Phanerozoic platform of central Europe. Detailed high-resolution images of the lithosphere–asthenosphere boundary (LAB) reveal indications for a typical continental lithosphere of about 100 km thickness beneath a majority of stations within Central Europe, whereas in the vicinity of the Trans-European Suture Zone (TESZ), the lithosphere thickens to about 130 km. A relatively thin lithosphere of 80 km was found beneath the Upper Rhine Graben region suggesting that the Cenozoic extension affects the whole lithosphere. No clear signal from the LAB was detected beneath the Alps and Carpathians. The LAB Sp phase might be disturbed by complicated structure due to ongoing collision/subduction in these regions, or the data are not yet sufficiently dense. A relatively thicker lithosphere of about 120 km was found beneath the SW part of the Bohemian Massif that was formed during the Variscan orogeny.We found an LAB depth of about 190 km near a single station located in the Vrancea area/Eastern Carpathians, which is characterized by the occurrence of intermediate deep earthquakes. Beneath the stations located in the Precambrian platform of Eastern Europe, the LAB deepens to approximately 〉200 km, even though the converted phase from the LAB is not as sharp as found beneath other stations located in Central Europe or even is missing.

Beschreibung: An automatic procedure is presented to retrieve rupture parameters for large earthquakes along the Sunda arc subduction zone. The method is based on standard array analysis and broadband seismograms registered within 30°–100° epicentral distance. No assumptions on source mechanism are required. By means of semblance the coherency of P waveforms is analysed at separate large-aperture arrays. Waveforms are migrated to a 10°×10° wide source region to study the spatio-temporal evolution of earthquakes at each array. The multiplication of the semblance source maps resulting at each array increases resolution. Start, duration, extent, direction, and propagation velocity are obtained and published within 25 min after the onset of the event. First preliminary results can be obtained even within 16 min. Their rapid determination may improve the mitigation of the earthquake and tsunami hazard. Real-time application will provide rupture parameters to the GITEWS project (German Indonesian Tsunami Early Warning System). The method is applied to the two M8.0 Sumatra earthquakes on 12 September 2007, to the M7.4 Java earthquake on 2 September 2009, and to major subduction earthquakes that have occurred along Sumatra and Java since 2000. Obtained rupture parameters are most robust for the largest earthquakes with magnitudes M≥8. The results indicate that almost the entire seismogenic part of the subduction zone off the coast of Sumatra has been ruptured. Only the great Sumatra event in 2004 and the M7.7 Java event on 17 July 2006 could reach to or close to the surface at the trench. Otherwise, the rupturing was apparently confined to depths below 25 km. Major seismic gaps seem to remain off the coast of Padang and the southern tip of Sumatra.

Beschreibung: In this essay we provide a short introduction to and overview of the basics of stable isotope geochemistry and its common application in petroleum geochemistry. We identify the processes that are responsible for the carbon and hydrogen isotopic compositions of biological and geological organic matter and indicate the utility of stable isotopes in oil-source rock correlations. Stable isotope analyses are also exploited in the investigation of different alteration processes within oils and petroleum reservoirs. State of the art work is presented, and future research needs are identified.

Beschreibung: It is common practice in the seismological community to use, especially for large earthquakes, the moment magnitude Mw as a unique magnitude parameter to evaluate the earthquake’s damage potential. However, as a static measure of earthquake size, Mwdoes not provide direct information about the released seismicwave energy and its high frequency content,which is the more interesting information both for engineering purposes and for a rapid assessment of the earthquake’s shaking potential. Therefore, we recommend to provide to disaster management organizations besides Mw also sufficiently accurate energy magnitude determinations as soon as possible after large earthquakes. We developed and extensively tested a rapid method for calculating the energy magnitude Me within about 10–15 min after an earthquake’s occurrence. The method is based on pre-calculated spectral amplitude decay functions obtained from numerical simulations of Green’s functions. After empirical validation, the procedure has been applied offline to a large data set of 767 shallow earthquakes that have been grouped according to their type of mechanism (strike-slip, normal faulting, thrust faulting, etc.). The suitability of the proposed approach is discussed by comparing our rapid Me estimates with Mw published by GCMT as well as with Mw and Me reported by the USGS. Mw is on average slightly larger than our Me for all types of mechanisms. No clear dependence on source mechanism is observed for our Me estimates. In contrast, Me from the USGS is generally larger than Mw for strike-slip earthquakes and generally smaller for the other source types. For ∼67 per cent of the event data set our Me differs ≤ ±0.3 magnitude units (m.u.) from the respective Me values published by the USGS. However, larger discrepancies (up to 0.8 m.u.) may occur for strike-slip events. A reason of that may be the overcorrection of the energy flux applied by the USGS for this type of earthquakes. We follow the original definition of magnitude scales, which does not apply a priori mechanism corrections to measured amplitudes, also since reliable fault-plane solutions are hardly available within 10–15 min after the earthquake origin time. Notable is that our uncorrected Me data show a better linear correlation and less scatter with respect to Mw than Me of the USGS. Finally, by analysing the recordings of representative recent pairs of strong and great earthquakes, we emphasize the importance of combining Mw and Me in the rapid characterization of the seismic source. They are related to different aspects of the source and may differ occasionally even more than 1 m.u. This highlights the usefulness and importance of providing these two magnitude estimates together for a better assessment of an earthquake’s shaking potential and/or tsunamigenic potential.

Beschreibung: Temporary arrays installed in urban areas for investigating the upper-most geological structure typically comprised of a limited number of stations and are arranged in geometries constrained by environmental boundaries. Therefore, it is expected that the frequency–wavenumber images are significantly blurred by the array transfer function and are corrupted by noise. In this paper, the effect of the Richardson–Lucy regularization method applied to the problem of deblurring frequency–wavenumber images is investigated. The images are computed by analysing data from two small-aperture 2-D arrays, installed with different configurations in a test-site within the town of Potenza (Southern Italy) for near-surface investigations. We show that removing the effects of the array response from the frequency–wavenumber images improve the phase-velocity estimation, reducing the relevant level of uncertainty. Furthermore, the Richardson–Lucy regularization method is effective in reducing the level of noise related to spatial aliasing by eliminating spurious peaks, allowing the maxima related to different seismic sources to be better discriminated.

Beschreibung: Non-volcanic tremor (NVT) has been observed at several subduction zones and at the San Andreas Fault (SAF). Tremor locations are commonly derived by cross-correlating envelope-transformed seismic traces in combination with source-scanning techniques. Recently, they have also been located by using relative relocations with master events, that is low-frequency earthquakes that are part of the tremor; locations are derived by conventional traveltime-based methods. Here we present a method to locate the sources of NVT using an imaging approach for multiple array data. The performance of the method is checked with synthetic tests and the relocation of earthquakes. We also applied the method to tremor occurring near Cholame, California. A set of small-aperture arrays (i.e. an array consisting of arrays) installed around Cholame provided the data set for this study. We observed several tremor episodes and located tremor sources in the vicinity of SAF. During individual tremor episodes, we observed a systematic change of source location, indicating rapid migration of the tremor source along SAF.

Beschreibung: Large-scale volcanic deformation recently detected by radar interferometry (InSAR) provides new information and thus new scientific challenges for understanding volcano-tectonic activity and magmatic systems. The destabilization of such a system at depth noticeably affects the surrounding environment through magma injection, ground displacement and volcanic eruptions. To determine the spatiotemporal evolution of the Lazufre volcanic area located in the central Andes, we combined short-term ground displacement acquired by InSAR with long-term geological observations. Ground displacement was first detected using InSAR in 1997. By 2008, this displacement affected 1800 km2 of the surface, an area comparable in size to the deformation observed at caldera systems. The original displacement was followed in 2000 by a second, small-scale, neighbouring deformation located on the Lastarria volcano. We performed a detailed analysis of the volcanic structures at Lazufre and found relationships with the volcano deformations observed with InSAR. We…zeige mehr

Beschreibung: Vulkanische Deformationen in großem Maßstab, die mittels InSAR gemessen wurden, liefern neue Informationen und dadurch einen neuen Blickwinkel auf vulkan-tektonische Aktivitäten und das Verständnis von langlebigen, magmatischen Systemen. Die Destabilisierung eines solchen Systems in der Tiefe beeinflusst dauerhaft die Oberfläche durch Versatz des Bodens, magmatische Einflüsse und vulkanische Unruhen. Mit der Kombination aus kleinräumigem Bodenversatz gemessen mittels InSAR, numerischer Modellierung und langfristigen geologischen Beobachtungen, analysieren wir die Gegend um den Vulkan Lazufre in den Zentralanden, um die raumzeitliche Entwicklung der Region zu bestimmen. Bodenversatz wurde hierbei im Jahr 1997 mittels Radar-Interferrometrie (InSAR) gemessen, was eine Fläche von 1800 km² ausmacht, vergleichbar mit der Größe der Deformation des Kraters. Im Jahr 2000 wurde zusätzlich eine kleinräumige Deformation am Nachbarvulkan Lastarria entdeckt. Wir sehen räumliche als auch zeitliche Verbindungen zwischen der Deformation…zeige mehr

Beschreibung: The Sumatran margin suffered three great earthquakes in recent years (Aceh-Andaman 26 December 2004 Mw = 9.1, Nias 28 March 2005 Mw = 8.7, Bengkulu 12 September 2007 Mw = 8.5). Here we present local earthquake data from a dense, amphibious local seismic network covering a segment of the Sumatran margin that last ruptured in 1797. The occurrence of forearc islands along this part of the Sumatran margin allows the deployment of seismic land-stations above the shallow part of the thrust fault. In combination with ocean bottom seismometers this station geometry provides high quality hypocentre location for the updip end of the seismogenic zone in an area where geodetic data are also available. In this region, the Investigator Fracture Zone (IFZ), which consists of 4 sub-ridges, is subducted below the Sunda plate. This topography appears to influence seismicity at all depth intervals. A well-defined linear streak of seismicity extending from 80 to 200 km depth lies along the prolongation of closely spaced IFZ sub-ridges. More intermediate depth seismicity is located to the southeast of this string of seismicity and is related to subducted rough oceanic seafloor. The plate interface beneath Siberut Island which ruptured last in 1797 is characterised by almost complete absence of seismicity.

Beschreibung: We study a large Mw= 7.6 earthquake that occurred on 2007 November 14 in the Northern Chile seismic gap near the city of Tocopilla. Using a variety of seismic data we show that this earthquake ruptured only the lower part of the interplate seismic zone and generated a series of plate interface aftershocks. Two large aftershocks on 2007 November 15 ruptured the interplate zone oceanwards of the Mejillones Peninsula, a major geographical feature in the Antofagasta region. On 2007 December 16, a large Mw= 6.8 aftershock, that occurred near the southern bottom of the fault plane of the main event, is shown to be a slab-push earthquake located inside the subducted Nazca Plate and triggered by along slab compression. Aftershocks of this event demonstrate that it occurred on an almost vertical fault. The Tocopilla earthquake took place just after the installation of a new seismological network by Chilean, German and French researchers. The accelerometric data combined with far field seismic data provide a quite complete and consistent view of the rupture process. The earthquake broke a long (130 km) and narrow (about 30–50 km) zone of the plate interface just above the transition zone. Using a non-linear kinematic inversion method, we determined that rupture occurred on two well-defined patches of roughly elliptical shape. We discuss the consequences of this event for models of gap filling earthquakes in Chile proposed in the 1970s.

Beschreibung: We use traveltime data of local earthquakes and controlled sources observed by a large, temporary, amphibious seismic network to reveal the anatomy of the southcentral Chilean subduction zone (37–39°S) between the trench and the magmatic arc. At this location the giant 1960 earthquake (M = 9.5) nucleated and ruptured almost 1000 km of the subduction megathrust. For the three-dimensional tomographic inversion we used 17,148 P wave and 10,049 S wave arrival time readings from 439 local earthquakes and 94 shots. The resolution of the tomographic images was explored by analyzing the model resolution matrix and conducting extensive numerical tests. The downgoing lithosphere is delineated by high seismic P wave velocities. High v p/v s ratio in the subducting slab reflects hydrated oceanic crust and serpentinized uppermost oceanic mantle. The subducting oceanic crust can be traced down to a depth of 80 km, as indicated by a low velocity channel. The continental crust extends to approximately a 50-km depth near the intersection with the subducting plate. This suggests a wide contact zone between continental and oceanic crust of about 150 km, potentially supporting the development of large asperities. Eastward the crustal thickness decreases again to a minimum of about a 30-km depth. Relatively low v p/v s at the base of the forearc does not support a large-scale serpentinization of the mantle wedge. Offshore, low v p and high v p/v s reflect young, fluid-saturated sediments of forearc basins and the accretionary prism.