ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Other Sources  (4,148)
  • FLUID MECHANICS AND HEAT TRANSFER  (2,608)
  • ASTRONAUTICS (GENERAL)  (1,540)
  • 1980-1984  (2,180)
  • 1975-1979  (1,963)
  • 1945-1949  (5)
Collection
  • Other Sources  (4,148)
Source
Keywords
Years
Year
  • 1
    facet.materialart.
    Unknown
    Astronautics (1977)
    In:  CASI
    Details
    Publication Date: 2009-11-17
    Description: Principles of rocket engineering, flight dynamics, and trajectories are discussed in this summary of Soviet rocket development and technology. Topics include rocket engine design, propellants, propulsive efficiency, and capabilities required for orbital launch. The design of the RD 107, 108, 119, and 214 rocket engines and their uses in various satellite launches are described. NASA's Saturn 5 and Atlas Agena launch vehicles are used to illustrate the requirements of multistage rockets.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Soviet Aircraft and Rockets (NASA-TT-F-770); p 198-271
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 2
    facet.materialart.
    Unknown
    Motions of a liquid in a pulsating bulb with application to problems of blood flow (1976)
    In:  CASI
    Details
    Publication Date: 2010-11-08
    Description: Potential flows may be utilized to represent motions produced in pulsating bulbs. While the initial bulb shape may be arbitrary, sequential shapes are related by affine transformations. Two components appear in the distribution of pressure, one dependent on the instantaneous velocity and the other on the acceleration. For flows with stationary streamlines the inertial impedance is that of a simple mass, and is proportional to the first moment of the actual mass of fluid contained within the bulb. Examples treated are: (1) Expanding and collapsing circular cylinders, and (2) elliptical cylinders in which the perimeter is held constant. The thickness of the pulsatile laminar boundary layer is found to be approximately on millimeter for conditions in the vicinity of the heart. Conditions for separation and turbulence differ from those in steady flow.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: NASA. Ames Res. Center Collected Works of Robert T. Jones; p 957-965
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 3
    facet.materialart.
    Unknown
    Investigation B: Laminar confined coaxial entrance flow with heat generation (1975)
    In:  CASI
    Details
    Publication Date: 2009-11-16
    Description: The results of a parametric study on the entrance flow region in a gas core nuclear reactor are presented. The physical system is modeled as laminar confined, coaxial flow with heat generation in the inner fluid. The governing equations include the boundary layer approximations and the assumptions of only radial radiative transport of energy represented as an energy diffusion term. The Von Mises transformation and a zeta transformation are used to transform the equations into nonlinear nonhomogeneous convective-diffusion equations. A unique combination of forward and backward difference equations which yields accurate results at moderate computational times, is used in the numerical method. Results show that the rapidly accelerating, heat generating inner stream actually shrinks in radius as it expands axially.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Turbulence Coefficients and Stability Studies for the Coaxial Flow or Dissimiliar Fluids; 76 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 4
    facet.materialart.
    Unknown
    Metallurgical processing (1979)
    In:  CASI
    Details
    Publication Date: 2006-07-06
    Description: The metallurgical processing experiments on Skylab were chosen to: (1) elucidate the unknown effects of a low gravity environment on certain processes; (2) determine to what extent nongravitational driven flows operate in the processes; and (3) explore the possibilities of containerless solidification. Welding and brazing experiments were conducted to provide an understanding of solidification mechanics in a weightless environment.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Early Space Expt. in Mater. Process.; 37 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 5
    facet.materialart.
    Unknown
    Early space experiments in materials processing: Future programs (1979)
    In:  CASI
    Details
    Publication Date: 2006-07-06
    Description: A list of the present state of knowledge in materials processing is presented. The fluid behavior in a low gravity environment is summarized. Materials processing in the Space Transportation System facility is discussed. Prospects for space commercialization are reported.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Early Space Expt. in Mater. Process.; 16 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 6
    facet.materialart.
    Unknown
    Post-Skylab activities (1979)
    In:  CASI
    Details
    Publication Date: 2006-07-06
    Description: The Apollo Soyuz Test Program is described. A modification of the Skylab furnace was developed for the ASTP mission that had a maximum temperature of 1200 C, a programmed cool down to give more uniform growth rates, and a He quench system to shorten the time required to reach allowable touch temperature. The Space Processing Applications Rocket (SPAR) program was initiated to provide some continuity in flight experimentation. Liquid mixing, immiscible alloy solidification, composite materials, bubbles and dispersed particles during solidification, and containerless processing techniques were studied in the SPAR program.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Early Space Expt. in Mater. Process.; 45 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 7
    facet.materialart.
    Unknown
    Fluid behavior in low g (1979)
    In:  CASI
    Details
    Publication Date: 2006-07-06
    Description: Several experiments and a number of demonstrations were performed during Skylab to elucidate the behavior of fluids in space. The purposes of these experiments were to confirm hypotheses on how systems would behave in a low-g environment, determine to what extent residual accelerations and nongravity-driven convection affected processes, and provide graphic demonstrations of fluid behavior in space for classroom use and to stimulate new ideas for low-g research.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Early Space Expt. in Mater. Process.; 33 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 8
    facet.materialart.
    Unknown
    Possible applications of space processing (1979)
    In:  CASI
    Details
    Publication Date: 2006-07-06
    Description: Numerous applications take advantage of low gravity. These range from research, such as study of basic properties of materials or developing a better understanding of various processes and how they might be controlled, to actual production of unique materials, either in very limited quantities for research purposes to serve as paradigms for determining the limiting results of processes in which gravity effects are removed, or in large quantities, to fill certain high technology needs that cannot be met by other means. Examples of these are given in the following topics discussed: (1) crystal growth; (2) metals, alloys and composite materials (metallurgy); (3) glass and ceramics (containerless processing); (4) fluid and chemical processes; and (5) processing of biological materials.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Early Space Expt. in Mater. Process.; 60 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 9
    facet.materialart.
    Unknown
    The evolution of apparatus for materials processing on Skylab (1979)
    In:  CASI
    Details
    Publication Date: 2006-07-06
    Description: The following topics are discussed: (1) the inception of space processing; (2) earth-based experimental activities prior to Skylab (drop tower and research aircraft experiments); (3) preliminary experiments in space (Apollo and sounding rocket experiments); and (4) Skylab experimental facilities. Apparatus for contained materials processing; for brazing in space; and containerless processing are presented and discussed. The Skylab materials processing system and miscellaneous design considerations are also discussed.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Early Space Expt. in Mater. Process.; 48 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 10
    facet.materialart.
    Unknown
    Modeling of the float zone process (1981)
    In:  CASI
    Details
    Publication Date: 2006-07-02
    Description: The interaction of heat, mass, and momentum transport in the floating zone method for growing single crystals from the melt is examined. Methods for detailed numerical simulation of the transport phenomena in a floating zone are developed. Results of the calculations are combined with experiments to determine the effects of solidification induced, surface tension driven, and buoyancy driven convection in establishing dopant redistribution in the melt and the roles of heat transfer in crystal and melt and melt/solid interface shape in determining crystal quality. State of the art finite element techniques were developed for calculating the influence of natural convection in the melt on the shape of a melt/crystal interface and dopant segregation in the crystal. These techniques are demonstrated for solidification by the Bridgman technique. Numerical techniques are developed that calculate the shapes of both the melt/solid and melt/gas interfaces simultaneously with the thermal fields in melt and solid. Models for the fluid flows due to the rotation of the feed and crystal rods are completed and the effects of these flows on dopant segregation are studied, especially in the case of zones longer than can be achieved on Earth.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Marshall Space Flight Center Float Zone Workshop; p 175-199
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 11
    facet.materialart.
    Unknown
    Calculations of the surface tensions of liquid metals (1981)
    In:  CASI
    Details
    Publication Date: 2006-07-02
    Description: The understanding of the surface tension of liquid metals and alloys from as close to first principles as possible is discussed. The two ingredients which are combined in these calculations are: the electron theory of metals, and the classical theory of liquids, as worked out within the framework of statistical mechanics. The results are a new theory of surface tensions and surface density profiles from knowledge purely of the bulk properties of the coexisting liquid and vapor phases. It is found that the method works well for the pure liquid metals on which it was tested; work is extended to mixtures of liquid metals, interfaces between immiscible liquid metals, and to the temperature derivative of the surface tension.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Marshall Space Flight Center Float Zone Workshop; p 169-172
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 12
    facet.materialart.
    Unknown
    Ground based silicon zoning program (1981)
    In:  CASI
    Details
    Publication Date: 2006-07-02
    Description: The preparation of building flight hardware and carrying out experiments in space was investigated. The ground based investigation phase A/B of the experimental float zoning of silicon is outlined. The overall program goals, leading to recommending experiments to be done in phase C/D are spelled out. Thermophysical properties which must be accurately known to compare thermophysical models to experimental zoning of silicon are listed.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Float Zone Workshop; p 111-124
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 13
    facet.materialart.
    Unknown
    Present growth technology of silicon germanium alloys and possible advantages of microgravity growth (1981)
    In:  CASI
    Details
    Publication Date: 2006-07-02
    Description: The growth technology of Silicon-germanium (Si-Ge) alloys and the possible advantages of growth in microgravity is reviewed. The Si-Ge alloys have a continuous variation of bandgap energy from the germanium bandgap to the silicon bandgap. The unusual two slope behavior of Eg versus composition is due to the differences in the conduction band structure between Si and Ge. Below 17% (atomic), the germanium band structure dominates; and above it, the bands are "silicon like". It is found that the growth of Si-Ge alloys in microgravity is very attractive. In particular, the float zone method, in which a liquid zone of controlled starting composition, used to grow a large amount of useful alloy crystal. Large temperature gradients and relatively flat growth interfaces are necessary to obtain homogeneous crystal growth.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Marshall Space Flight Center Float Zone Workshop; p 151-163
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 14
    facet.materialart.
    Unknown
    Review of literature surface tension data for molten silicon (1981)
    In:  CASI
    Details
    Publication Date: 2006-07-02
    Description: Measurements of the surface tension of molten silicon are reported. For marangoni flow, the important parameter is the variation of surface tension with temperature, not the absolute value of the surface tension. It is not possible to calculate temperature coefficients using surface tension measurements from different experiments because the systematic errors are usually larger than the changes in surface tension because of temperature variations. The lack of good surface tension data for liquid silicon is probably due to its extreme chemical reactivity. A material which resists attack by molten silicon is not found. It is suggested that all of the sessile drip surface tension measurements are probably for silicon which is contaminated by the substrate materials.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Marshall Space Flight Center Float Zone Workshop; p 167-168
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 15
    facet.materialart.
    Unknown
    The historical trend in float zone crystal diameters and power requirements for float zoned silicon crystals (1981)
    In:  CASI
    Details
    Publication Date: 2006-07-02
    Description: The power needed to zone silicon crystals by radio frequency heating was analyzed. The heat loss mechanisms are examined. Curves are presented for power as a function of crystal diameter for commercial silicon zoning.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Marshall Space Flight Center Float Zone Workshop; p 99-106
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 16
    facet.materialart.
    Unknown
    Electric power needs in space (1981)
    In:  CASI
    Details
    Publication Date: 2006-07-02
    Description: The power requirements for specific float zone experiments in space are presented. Power figures for the Space Shuttle and projected available power for advanced vehicles are given. The following power related trends are derived: (1) float zone processing of up to 5 cm diameter silicon and 16.0 cm diameter cadmium telluride can be conducted on a Shuttle pallet mission; (2) float zone processing of up to 8.5 cm diameter silicon for 70% total heating efficiency can be conducted on the initial MEC/space platform; (3) projected available host vehicle power for float zone sample heating; (4) induction heating is found to be the most promising heating method; (5) process control and ease of equipment integration into the host vehicle influence heating method selection.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Marshall Space Flight Center Float Zone Workshop; p 89-98
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 17
    facet.materialart.
    Unknown
    Power requirements for space crystal growth (1981)
    In:  CASI
    Details
    Publication Date: 2006-07-02
    Description: The need for power to grow silicon of a size suitable to make into devices is addressed. The expected results are tied to available power. The projection of the size of float zone crystals as a function of time is discussed. An accompanying graph shows that 4 in. will be the normally used diameter by 1985 and 5 in. by 1990. Material to be tested in device lines in this time frame should be 4 in. or more. The various power losses, 25 kW with a 50% power efficiency, which is much improved over present RF heating efficiencies.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Float Zone Workshop; p 83-88
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 18
    facet.materialart.
    Unknown
    Role of substrate quality on IC performance and yields (1981)
    In:  CASI
    Details
    Publication Date: 2006-07-02
    Description: The development of silicon and gallium arsenide crystal growth for the production of large diameter substrates are discussed. Large area substrates of significantly improved compositional purity, dopant distribution and structural perfection on a microscopic as well as macroscopic scale are important requirements. The exploratory use of magnetic fields to suppress convection effects in Czochralski crystal growth is addressed. The growth of large crystals in space appears impractical at present however the efforts to improve substrate quality could benefit from the experiences gained in smaller scale growth experiments conducted in the zero gravity environment of space.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Marshall Space Flight Center Float Zone Workshop; p 65-80
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 19
    facet.materialart.
    Unknown
    Industry needs for silicon crystals and standards (1981)
    In:  CASI
    Details
    Publication Date: 2006-07-02
    Description: The trend of the device fabrication industry requirement for larger crystals is reviewed. The ranges of properties and uniformities measurement standards needed for resistivity (four-point probe and spreading resistance) and for the chemical composition of oxygen and carbon impurities are presented.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Marshall Space Flight Center Float Zone Workshop; p 59-64
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 20
    facet.materialart.
    Unknown
    Air Force future technical requirements for silicon (1981)
    In:  CASI
    Details
    Publication Date: 2006-07-02
    Description: Technical requirements for silicon-based bulk materials are presented, and related work on other materials and on thin layer silicon is summarized. Programs supported by the Wright-Patterson materials laboratory and the capabilities of the materials laboratory in house characterization facility are listed.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Marshall Space Flight Center Float Zone Workshop; p 55-58
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 21
    facet.materialart.
    Unknown
    Growth of III-V and II-VI alloy crystals in space by vertical zone leveling (1981)
    In:  CASI
    Details
    Publication Date: 2006-07-02
    Description: The process of vertical zone melting of CdTe and InP is illustrated, and the growth of Cd sub x Hg sub (1 - x)Te and InP sub y As sub (1-y) is considered.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Marshall Space Flight Center Float Zone Workshop; p 46-54
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 22
    facet.materialart.
    Unknown
    Material and processing needs for silicon solar cells in space (1981)
    In:  CASI
    Details
    Publication Date: 2006-07-02
    Description: The technical concerns of NASA in the area of space grade solar cells are summarized. Solar power needs are projected through 1987. The degradation of solar cell performance due to the effects of radiation on impurities and crystal defects and the improved performance of float zone silicon are illustrated. The reduction of oxygen and carbon in float zone silicon allows for much faster low temperature annealing of the defects. The effects of improved crystal purity on cell performance are summarized.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Marshall Space Flight Center Float Zone Workshop; p 33-41
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 23
    facet.materialart.
    Unknown
    Float zone space processing rationale (1981)
    In:  CASI
    Details
    Publication Date: 2006-07-02
    Description: The role of float zone silicon in integrated circuits is surveyed. The problem of oxygen thermal donors and their inhomogeneous distribution is predicted to be a critical issue.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Marshall Space Flight Center Float Zone Workshop; p 42-45
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 24
    facet.materialart.
    Unknown
    The need for growing crystals in space (1981)
    In:  CASI
    Details
    Publication Date: 2006-07-02
    Description: Payoffs of crystal growth in space in the areas of understanding growth and melt flow mechanisms, the growth of more uniform crystals with fewer defects, and the growth of crystals difficult or impossible to grow on Earth are summarized. The advantages of various heating methods are summarized. Critical devices requiring the uniformity and lower defect density of crystals grown in space are listed.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Float Zone Workshop; p 23-33
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 25
    facet.materialart.
    Unknown
    The nature of melt process changes in microgravity (1981)
    In:  CASI
    Details
    Publication Date: 2006-07-02
    Description: The effects on melt impurities of the lack of buoyancy-driven convection in melts and the gas phase are outlined. Probable effects noted are: retardation of convective flow by a thin adsorbed impurity layer because of surface tension gradients (Marangoni flow); changes in the transport of volatile impurities to the melt surface and the consequent reduction of evaporation; and the change in dependence of evaporation rates on pressure due to the absence of convective flow in the gas next to the melt.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Marshall Space Flight Center Float Zone Workshop; p 16-19
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 26
    facet.materialart.
    Unknown
    Review of past flight experiments pertinent to float zone (1981)
    In:  CASI
    Details
    Publication Date: 2006-07-02
    Description: Materials processing experiments performed in space since 1973 are listed. Experiments carried out in Skylab, the Apollo Soyuz mission, and on SPAR sounding rockets are included.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Float Zone Workshop; p 13-15
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 27
    facet.materialart.
    Unknown
    Float Zone Workshop, introduction (1981)
    In:  CASI
    Details
    Publication Date: 2006-07-02
    Description: The purposes of the float zone working group are summarized. Present and proposed U.S. and European research programs are listed, and power needs for float zoning surveyed. A 1981 to 1991 schedule for development efforts is presented.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Float Zone Workshop; p 1-10
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 28
    facet.materialart.
    Unknown
    A numerical comparison with an exact solution for the transient response of a cylinder immersed in a fluid (1979)
    In:  CASI
    Details
    Publication Date: 2006-07-02
    Description: The transient response of an elastic cylindrical shell immersed in an acoustic media that is engulfed by a plane wave is determined numerically. The method applies to the USA-STAGS code which utilizes the finite element method for the structural analysis and the doubly asymptotic approximation for the fluid-structure interaction. The calculations are compared to an exact analysis for two separate loading cases: a plane step wave and an exponentially decaying plane wave.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Shock and Vibration Inform. Center The Shock and Vibration Bull., Pt. 3; p 23-28
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 29
    facet.materialart.
    Unknown
    NASA workshop on outgassing (1979)
    In:  CASI
    Details
    Publication Date: 2006-06-20
    Description: The materials and processing constraints that are involved in the construction of a molecular wake shield for the shuttle orbiter are discussed. Stainless steel, having outgassing rates less than the required 10 to the minus 12th power Torr-liters/sq cm per second was the primary material suggested for the construction of the shield.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Proc. of Workshops to Define Eng. Requirements for a Space Vacuum Res. Facility; 17 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 30
    facet.materialart.
    Unknown
    Report of the Ad Hoc Committee on the assessment of models of a wake shield environment around various spacecraft, Universities Space Research Association (1979)
    In:  CASI
    Details
    Publication Date: 2006-06-20
    Description: Models depicting the ambient atmosphere which can overtake the spacecraft vacuum shield are presented. The subject areas discussed are: possible changing effects on the wake shield environment; possible utilization of the induced environmental contamination monitor; present state of the knowledge of the parameters used to describe the intermolecular collisions; the possibility of using simple models to describe the wake shield environment; possible errors associated with using kinetic theory to calculate that part of the atmosphere overtaking the shield; and a general assessment of the Monte Carlo techniques used to calculate the shield environment.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Marshall Space Flight Center Proc. of Workshops to Define Eng. Requirements for a Space Vacuum Res. Facility; 6 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 31
    facet.materialart.
    Unknown
    Proceedings of workshops to define engineering requirements for a space vacuum research Facility: Summary (1979)
    In:  CASI
    Details
    Publication Date: 2006-06-20
    Description: Models depicting the collision dynamics in the near vicinity of a body orbiting in the upper atmosphere were studied to investigate degassing techniques for a vacuum facility.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Proc. of Workshops to Define Eng. Requirements for a Space Vacuum Res. Facility; 3 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 32
    facet.materialart.
    Unknown
    Space environment effects (M0006) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The effects of long term exposure to the near Earth space environment on advanced electrooptical and radiation sensor components were examined. The effect of long duration spaceflight on the germination rate of selected terrestrial plant seeds is observed in exobiological experiments.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 185-187
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 33
    facet.materialart.
    Unknown
    Effect of shear stress on cell cultures and other reactor problems (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Anchorage dependent cell cultures in fluidized beds are tested. Feasibility calculations indicate the allowed parameters and estimate the shear stresses therein. In addition, the diffusion equation with first order reaction is solved for the spherical shell (double bubble) reactor with various constraints.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Houston Univ. The 1981 NASA ASEE Summer Fac. Fellowship Program, Vol. 2; 19 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 34
    facet.materialart.
    Unknown
    Full-coverage film cooling (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Transpiration cooling is treated and then full coverage discrete hole injection for three injection orientations. Spacings with pitch to diameter ratios of 5 and 10 are discussed. The array is staggered, with the transverse pitch and the streamwise pitch the same. Results are presented in terms of the Stanton number using the heat transfer coefficient defined in terms of the difference between the wall temperature and the free stream temperature. Two values of Stanton number are provided for each situation: one with the injectant at wall temperature, and the other with the injectant at free stream temperature. These two values are equivalent to knowing the heat transfer coefficient and the adiabatic effectiveness. The heat transfer coefficient thus defined is used with the actual wall temperature to and the actual gas temperature to calculate the heat load. The principle of superposition thus invoked is valid exactly when the governing equations are linear.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Von Karman Inst. for Fluid Dyn. Film Cooling and Turbine Blade Heat Transfer, Vol. 1; 27 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 35
    facet.materialart.
    Unknown
    Electrophoresis of biological materials (1975)
    In:  CASI
    Details
    Publication Date: 2006-04-10
    Description: The selection of biological products was studied for electrophoresis in space. Free flow electrophoresis, isoelectric focusing, and isotachophoresis are described. The candidates discussed include: immunoglobulins and gamma globulins; isolated islet of langerhans from pancreas; bone marrow; tumor cells; kidney cells, cryoprecipitate; and column separated cultures.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Econ. Analysis of Materials Processing in Space; p 177-190
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 36
    facet.materialart.
    Unknown
    High purity tungsten targets (1975)
    In:  CASI
    Details
    Publication Date: 2006-04-10
    Description: High purity tungsten, which is used for targets in X-ray tubes was considered for space processing. The demand for X-ray tubes was calculated using the growth rates for dental and medical X-ray machines. It is concluded that the cost benefits are uncertain.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Econ. Analysis of Materials Processing in Space; p 159-176
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 37
    facet.materialart.
    Unknown
    Costs and benefits of turbine blades (1975)
    In:  CASI
    Details
    Publication Date: 2006-04-10
    Description: The potential demand for space processed turbine blades, and the dollar benefits to be derived from this technology were analyzed. It was found that an adequate demand to justify space processed blades will exist. The cost benefits per blade for replacements in existing aircraft is estimated to be $997.50 per blade, and for new aircraft the savings per blade would be over $21,000.00.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Econ. Analysis of Materials Processing in Space; p 40-90
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 38
    facet.materialart.
    Unknown
    Materials science (1981)
    In:  CASI
    Details
    Publication Date: 2006-06-04
    Description: The first Spacelab space processing payload includes the following categories of hardware: (1) multiuser facilities, (2) common-support equipment, and (3) six autonomous experiments. All the hardware, with the exception of two elements (covering three experiments), will be integrated in a Spacelab double rack called the materials science double rack. The payload experimental facilities are intended to perform, during the first Spacelab mission, a number of significant pilot experiments in the fields of crystal growth, fluid physics and metallurgy, and, at the same time, to flight-verify the materials science hardware items developed (e.g., various furnaces, process chambers, etc.).
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Marshall Space Flight Center Spacelab Mission 1 Expt. Descriptions; 16 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 39
    facet.materialart.
    Unknown
    Application of fluidics to new control components (1978)
    In:  CASI
    Details
    Publication Date: 2006-03-02
    Description: The inherent tolerance for nuclear radiation makes fluidic devices candidates for nuclear rocket control systems. Also, they are being considered for supersonic jet engine inlet control because of their high temperature and vibration tolerance. Three new control components being considered for these applications are described. A fluidic circuit to control a pneumatic stepping motor for nuclear rocket control drum actuation is discussed. An all-fluidic sensor being developed for determining the position of the normal shock in the inlet of a supersonic jet engine is outlined. A new vortex valve configuration is developed to prevent supersonic jet engine inlet unstarts by regulating bypass flow.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: NASA, Washington Fourth Inter-Center Control Systems Conf.; p 365-386
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 40
    facet.materialart.
    Unknown
    Capillary priming characteristics of a dual passage heat pipe in zero-g (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Technical improvements of a long life heat rejection system, suitable for long duration high power missions, that can be constructed and deployed in orbit is discussed. A mathematical model is formulated and a computer program developed which describes the transient priming characteristics of a dual passage heat pipe. An experimental test package is described for flight in the KC-135 Zero-g Aircraft, to be used to verify the modeling predictions.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Houston Univ. The 1981 NASA ASEE Summer Fac. Fellowship Program, Vol. 2; 50 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 41
    facet.materialart.
    Unknown
    Drop dynamics (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The drop dynamics module is a Spacelab-compatible acoustic positioning and control system for conducting drop dynamics experiments in space. It consists basically of a chamber, a drop injector system, an acoustic positioning system, and a data collection system. The principal means of collecting data is by a cinegraphic camera. The drop is positioned in the center of the chamber by forces created by standing acoustic waves generated in the nearly cubical chamber (about 12 cm on a side). The drop can be spun or oscillated up to fission by varying the phse and amplitude of the acoustic waves. The system is designed to perform its experiments unattended, except for start-up and shutdown events and other unique events that require the attention of the Spacelab payload specialist.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Marshall Space Flight Center Spacecraft Dyn. as Related to Lab. Expt. in Space; p 32-33
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 42
    facet.materialart.
    Unknown
    Coalignment of spacecraft experiments (1981)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: On February 14, 1980, the solar maximum mission (SMM) satellite was launched into orbit with experiments to monitor solar activity. In order to obtain common object observations, experiments must be coaligned within 90 arc-seconds of the spacecraft pointing vector. Hardware designed to minimize structural and thermal distortions of the experiment support plate is described. Coalignment was provided through control of interface which combined flexible blades to limit load transfer and spherical seats for alignment reference.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Marshall Space Flight Center The 15th Aerospace Mech. Symp.; p 91-113
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 43
    facet.materialart.
    Unknown
    Flow phenomena peculiar to calculation of compressible turbulent boundary layers (1977)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: Calculation procedures for compressible turbulent boundary layers were based upon techniques, modeling constants, etc., developed originally for the low speed case. Significant differences and new or altered physics which occur in the compressible case were considered, as compared with the low speed situation. Possible pitfalls and sources of inaccuracy in the calculations were indicated.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Calculation Methods for Compressible Turbulent Boundary Layers, 1976; p 9-46
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 44
    facet.materialart.
    Unknown
    Skylab: A beginning (1977)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: A major goal of Skylab was to learn more about man and his responses to the space environment for missions lasting up to 84 days. A review of Skylab data pertaining to this goal is given.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Biomed. Results from Skylab; p 408-418
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 45
    facet.materialart.
    Unknown
    A survey of Rocketry and astronautics in Spain (1977)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: The entire field of rocketry and astronautics in Spain was studied. Congreve war rockets in military actions were emphasized in the African war, the Cuban campaign and the Spanish Civil War. Rockets in space travel were also summarized along with space science fiction.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA, Washington Essays on the History of Rocketry and Astronautics, Vol. 1; p 78-101
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 46
    facet.materialart.
    Unknown
    On the works of S. S. Nezhdanovsky in the field of flight based on reactive principles, 1880 - 1895 (1977)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: The work of a Soviet scientist and inventor of the 19th century, S. S. Nezhdanovsky, is discussed. Investigations in the field of aircraft science and technology are emphasized in relation to Nezhdanovsky's studies of using the jet principle in solving the problem of human flight. Nezhdanovsky dealt with calculations of the speed at which combustion products flow, and considered such problems as fuel feeding into the combustion chamber by means of pumps, and the use of one of the fuel components for cooling the walls of the combustion chamber.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA, Washington Essays on the History of Rocketry and Astronautics, Vol. 1; p 125-139
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 47
    facet.materialart.
    Unknown
    History of the development of rocket technology and astronautics in Poland (1977)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: The development of rocket technology in Poland is outlined. The history cites 13th century use of war rockets in combating Tartars as well as 20th century studies of the future and reality of space flights.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA, Washington Essays on the History of Rocketry and Astronautics, Vol. 1; p 102-111
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 48
    facet.materialart.
    Unknown
    First works by K. E. Tsiolkovsky and I. V. Meshchersky on rocket dynamics (1977)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: A study of rocket dynamics done by K. E. Tsiolkovsky in 1896 is reported. Problems in rectilinear movement of rockets were studied. Calculations were done on velocity efficiency, motion in free space, motion in a homogeneous gravitational field and motion with constant acceleration.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA, Washington Essays on the History of Rocketry and Astronautics, Vol. 1; p 115-124
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 49
    facet.materialart.
    Unknown
    Platforms in space: Evolutionary trends (1979)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: The problem of physical crowding and the proliferation of separate communication links and ground support systems for multiple free-flying satellites can be overcome by using space platforms and multiplexing the data streams. Pertinent features of the space shuttle orbiter payloads, the solar power satellite, and geostationary and geosynchronous platforms are discussed. Typical payload requirements data which are needed to allow meaningful study of payloads as candidates for platform implementation are cited and factors affecting the compatibility/grouping of payloads are outlined.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Proc.: Workshop on the Need for Lightning Observations from Space; p 159-182
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 50
    facet.materialart.
    Unknown
    Surface-tension-induced convection experiment MA-041 (1976)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: In the absence of gravity, stirring in a liquid is suppressed because of density differences caused by thermal or compositional gradients. However, other mechanisms resulting in natural convection in a microgravity environment exist. One of the most important mechanisms for liquid metals is surface tension driven convection, which becomes predominant in the low gravity environment. In this case, surface tension differences caused by compositional or temperature gradients have been demonstrated to cause stirring in liquids during experiments performed onboard Skylab. Compositional gradients were created by adding a soap solution to a large water globule, which caused vigorous fluid motion for some moments after the addition.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: NASA. Lyndon B. Johnson Space Center Apollo-Soyuz Test Project; 11 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 51
    facet.materialart.
    Unknown
    Summary of calculation procedures for nonsimilar two- and three-dimensional compressible turbulent boundary layers (finite difference, finite element and weighted residual methods), appendix (1977)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: This numerical prediction summary indicates the wide variety of such procedures which are available. Most procedures have detailed user manuals, and in many cases the codes are available. Many of the special effects treated by various methods (such as nonequilibrium or equilibrium chemistry, transition, roughness etc.) are indicated.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Calculation Methods for Compressible Turbulent Boundary Layers, 1976; p 69-78
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 52
    facet.materialart.
    Unknown
    Calculation of three-dimensional compressible turbulent boundary layers (1977)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: From comparisons of high speed data with low speed closure procedures using variable mean density, there does not appear to be any appreciable influence of compressibility upon turbulent shear stress modeling in compressible turbulent boundary layers, even for extreme cases such as Mach 14 to 20 with a change in density across the layer of up to a factor of 100. Other evidence of apparent lack of compressibility caused new physics which may alter the shear stress for the compressible boundary layer cases including: (1) fluctuation Mach number was generally less than 1; (2) the shear stress distribution through the boundary layer was not a function of Mach number for zero pressure gradient flows; (3) the Morkovin hypothesis was valid up to Mach 5 (based on fluctuation data); (4) profile N power was not a function of Mach number, at least up to Mach 10; and (5) the nondimensional burst period was approximately the same as that for low speed.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Calculation Methods for Compressible Turbulent Boundary Layers, 1976; p 47-68
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 53
    facet.materialart.
    Unknown
    Equations and closure methods (1977)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: Basic differential equations governing compressible turbulent boundary layer flow are reviewed, including conservation of mass and energy, momentum equations derived from Navier-Stokes equations, and equations of state. Closure procedures were broken down into: (1) simple or zeroth-order methods, (2) first-order or mean field closure methods, and (3) second-order or mean turbulence field methods.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Calculation Methods for Compressible Turbulent Boundary Layers, 1976; p 6-8
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 54
    facet.materialart.
    Unknown
    Guido von Pirquet: Austrian pioneer of astronautics (1977)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: The works of Guido von Pirquet, Austrian pioneer of rocketry, were assessed. Major emphasis was given to Pirquet's calculation of the route to Venus which in fact was followed by the first Russian rocket to Venus. Of interest also is Pirquet's valuable construction of a space station and his analysis of interstellar space flight.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA, Washington Essays on the History of Rocketry and Astronautics, Vol. 1; p 140-155
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 55
    facet.materialart.
    Unknown
    Progress Report on Project Mercury (1976)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: Progress on Project Mercury, program for manned orbital space flight, is briefly reviewed. The original aims and concepts of the project are recounted. Various types of launch apparatus are mentioned along with safety factors.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Collected Works of Charles J. Donlan; 6 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 56
    facet.materialart.
    Unknown
    Guidelines for advanced manned space vehicle program, June 1960 (1976)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: A very broad mission objective was established; i.e., manned circumlunar flight and return to earth. It is implicit that the Saturn will be the primary propulsion system for this mission. The following attempts to: (1) define the objective so as to achieve as much capability in the vehicle as possible; (2) draw on Mercury experience to provide broad guidelines for vehicle performance and safety; (3) provide flexibility in the vehicle capability in the event that the manned lunar mission is proved to be subject to unacceptable risk in the target time period; and (4) indicate problem areas where work appears to be particularly needed.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Collected Works of Charles J. Donlan; 66 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 57
    facet.materialart.
    Unknown
    Extraction processes for the production of aluminum, titanium, iron, magnesium, and oxygen and nonterrestrial sources (1979)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: The suitability of existing terrestrial extractive metallurgical processes for the production of Al, Ti, Fe, Mg, and O2 from nonterrestrial resources is examined from both thermodynamic and kinetic points of view. Carbochlorination of lunar anorthite concentrate in conjunction with Alcoa electrolysis process for Al; carbochlorination of lunar ilmenite concentrate followed by Ca reduction of TiO2; and subsequent reduction of Fe2O3 by H2 for Ti and Fe, respectively, are suggested. Silicothermic reduction of olivine concentrate was found to be attractive for the extraction of Mg becaue of the technological knowhow of the process. Aluminothermic reduction of olivine is the other possible alternative for the production of magnesium. The large quantities of carbon monoxide generated in the metal extraction processes can be used to recover carbon and oxygen by a combination of the following methods: (1) simple disproportionation of CO,(2) methanation of CO and electrolysis of H2O, and (3) solid-state electrolysis of gas mixtures containing CO, CO2, and H2O. The research needed for the adoption of earth-based extraction processes for lunar and asteroidal minerals is outlined.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Ames Res. Center Space Resources and Space Settlements; p 257-274
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 58
    facet.materialart.
    Unknown
    The initial lunar supply base (1979)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: The first lunar supply base should have a mass less than 1000 tons, be deployed by 24 persons in 4 months, and be maintained by 10 persons. Output could be expanded 20 times in 5 years to 600,000 tons/yr by a factor of 10 expansion of the area of the solar array on the lunar surface, using low power soil beneficiation, increasing the fleet of mining vehicles, and illuminating the base continuously at night with lunar orbiting mirrors. The space manufacturing facility (SMF) will supply most of the mass (solar cells and orbiting mirrors) necessary for expansion. Several devices and procedures are suggested for development which could further reduce the total mass necessary to transport to the Moon to establish the initial lunar supply base.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Ames Res. Center. Space Resources and Space Settlements; p 207-224
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 59
    facet.materialart.
    Unknown
    Science demonstrations (1976)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: Three demonstrations of scientific concepts concerning liquids were performed during the Apollo-Soyuz Test Project mission. Chemical foaming, spreading of liquids, and capillary wicking were the subjects of each demonstration photographed in space. The results clearly illustrated the basic principles, and films suitable for educational uses are now available from the first author.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Apollo-Soyuz Test Project; 9 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 60
    facet.materialart.
    Unknown
    Zero-G processing of magnets experiment MA-070 (1976)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: Solidification of magnetic materials in the low gravity orbital environment was studied. The magnetic compounds under study, manganese bismuth and copper cobalt cerium ((Cu, Co)5Ce), both have the potential for the development of high coercive strength. Preliminary results indicate that static fluid configurations, in the absence of the gravitational body force, differ substantially from the documented terrestrial behavior. Chemical homogeneity is substantially enhanced on a macroscopic and microscopic level. Single crystal matrices have been grown in the coordinated growth regions of the flight samples. Primary crystals one order of magnitude greater than those grown terrestrially have been noted and are limited in size by the ampoule dimensions.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Lyndon B. Johnson Space Center Apollo-Soyuz Test Project; 13 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 61
    facet.materialart.
    Unknown
    Heat loss and drag of spherical drop tube samples (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Analysis techniques for three aspects of the performance of the NASA/MSFC 32 meter drop tube are considered. Heat loss through the support wire in a pendant drop sample, temperature history of a drop falling through the drop tube when the tube is filled with helium gas at various pressures, and drag and resulting g-levels experienced by a drop falling through the tube when the tube is filled with helium gas at various pressures are addressed. The developed methods apply to systems with sufficiently small Knudsen numbers for which continuum theory may be applied. Sample results are presented, using niobium drops, to indicate the magnitudes of the effects. Helium gas at one atmosphere pressure can approximately double the amount of possible undercooling but it results in an apparent gravity levels of up to 0.1 g.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: the 1981 NASA(ASEE Summer Fac. Fellowship Program; 31 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 62
    facet.materialart.
    Unknown
    Solar-induced variations of environment affecting manned space flight and spacecraft operations (1979)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: Estimates of short and long term solar activity are required for calculating variations in the environment with regard to spacecraft charging, radiation effects, and orbital lifetime. Correlations appear to exist between the time of solar activity and the time of operational anomalies due to electrical discharges when the dielectric surfaces of geosynchronous spacecraft are charged by interaction with the ambient plasma to levels above breakdown voltage. An ability to predict the solar induced variation variability of the plasmas could permit refinement of design criteria. The influence of the radiation on spacecraft materials, systems, and manned operations is summarized. Solar radition effects on the orbital altitude atmospheric density environment and spacecraft lifetimes are also considered.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Solar-Terrest. Predictions Proc., Vol. 2; p 89-103
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 63
    facet.materialart.
    Unknown
    User requirements of solar-terrestrial predictions for spacecraft applications (1979)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: Areas which are influenced by solar-terrestrial coupling effects and which are internal to the Earth's magnetosphere are of interest to mission planners, spacecraft hardware designers, and those engaged in the operation of already orbiting manned or unmanned spacecraft. Accurate models are needed to predict energetic particle flux density, interactions between low energy (10 eV to 100 eV) near-Earth plasma and space systems, and neutral atmospheres. Parameters required for each of these areas are discussed.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Marshall Space Flight Center Solar-Terrest. Predictions Proc., Vol. 2; p 1-20
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 64
    facet.materialart.
    Unknown
    Two-phase flow and heat transfer under low gravity (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Spacelab experiment to investigate two-phase flow patterns under gravity uses a water-air mixture experiment. Air and water are circulated through the system. The quality or the mixture or air-water is controlled. Photographs of the test section are made and at the same time pressure drop across the test section is measured. The data establishes a flow regime map under reduced gravity conditions with corresponding pressure drop correlations. The test section is also equipped with an electrical resistance heater in order to allow a flow boiling experiment to be carried out using Freon II. High-speed photographs of the test section are used to determine flow patterns. The temperature gradient and pressure drop along the duct can be measured. Thus, quality change can be measured, and heat transfer calculated.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: NASA. Marshall Space Flight Center Spacecraft Dyn. as Related to Lab. Expt. in Space; p 43-57
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 65
    facet.materialart.
    Unknown
    Effects of spacecraft motions on fluids experiments (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The equations of motion governing an incompressible fluid contained in an orbiting laboratory were examined to isolate various fictitious forces and their relative influence on the fluid. The forces are divided into those arising from the orbital motions and those arising from small local motions of the spacecraft about its center of mass. The latter dominate the nonrotating experiments. Both are important for rotating experiments. A brief discussion of the onset of time-dependence and violent instability in earth-based rotating and processing systems is given.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: NASA. Marshall Space Flight Center Spacecraft Dyn. as Related to Lab. Expt. in Space; p 96-102
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 66
    facet.materialart.
    Unknown
    Susceptibility of materials processing experiments to low-level accelerations (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The types of material processing experiments being considered for shuttle can be grouped into four categories: (1) contained solidification experiment; (2) quasicontainerless experiments; (3) containerless experiments; and (4) fluids experiments. Low level steady acceleration, compensated and uncompensated transient accelerations, and rotation induced flow factors that must be considered in the acceleration environment of a space vehicle whose importance depends on the type of experiment being performed. Some control of these factors may be exercised by the location and orientation of the experiment relative to shuttle and by the orbit vehicle attitude chosen for mission. The effects of the various residual accelerations can have serious consequence to the control of the experiment and must be factored into the design and operation of the apparatus.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Spacecraft Dyn. as Related to Lab. Expt. in Space; p 63-68
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 67
    facet.materialart.
    Unknown
    Convection in fluids at reduced gravity (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Natural convection is not always harmful and, therefore, to be avoided. In some situations it may be desirable to have fluid flows in space processes, e.g., to stir the fluid phase for mixing and cooling or to help maintain concentration gradients. In may event, it is important to know the extent and nature of convection in space and the factors on which it depends, in order either to minimize the effects to convection, or to utilize the convection to advantage. The information needed to assess both conventional and unstable convection includes: (1) the magnitude and direction of accelerations; (2) geometric configuration; (3) imposed boundary conditions; and (4) material properties.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: NASA. Marshall Space Flight Center Spacecraft Dyn. as Related to Lab. Expt. in Space; p 69-95
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 68
    facet.materialart.
    Unknown
    Geophysical fluid dynamics (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Systematic scaling or dimensional analysis reveals that certain scales of geophysical fluid flows (such as stellar, ocean, and planetary atmosphere circulations) can be accurately modeled in the laboratory using a procedure which differs from conventional engineering modeling. Rather than building a model to obtain numbers for a specific design problem, the relative effects of the significant forces are systematically varied in an attempt to deepen understanding of the effects of these forces. Topics covered include: (1) modeling a large-scale planetary atmospheric flow in a rotating cylindrical annulus; (2) achieving a radial dielectric body force; (3) spherical geophysical fluid dynamics experiments for Spacelab flights; (4) measuring flow and temperature; and (5) the possible effect of rotational or precessional disturbances on the flow in the rotating spherical containers.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Spacecraft Dyn. as Related to Lab. Expt. in Space; p 25-31
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 69
    facet.materialart.
    Unknown
    Crystal study and econometric model (1975)
    In:  CASI
    Details
    Publication Date: 2006-04-10
    Description: An econometric model was developed that can be used to predict demand and supply figures for crystals over a time horizon roughly concurrent with that of NASA's Space Shuttle Program - that is, 1975 through 1990. The model includes an equation to predict the impact on investment in the crystal-growing industry. Actually, two models are presented. The first is a theoretical model which follows rather strictly the standard theoretical economic concepts involved in supply and demand analysis, and a modified version of the model was developed which, though not quite as theoretically sound, was testable utilizing existing data sources.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Econ. Analysis of Materials Processing in Space; p 191-233
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 70
    facet.materialart.
    Unknown
    Turbine blade processing (1975)
    In:  CASI
    Details
    Publication Date: 2006-04-10
    Description: Space processing of directionally solidified eutectic-alloy type turbine blades is envisioned as a simple remelt operations in which precast blades are remelted in a preformed mold. Process systems based on induction melting, continuous resistance furnaces, and batch resistance furnaces were evaluated. The batch resistance furnace type process using a multiblade mold is considered to offer the best possibility for turbine blade processing.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Econ. Analysis of Materials Processing in Space; p 91-158
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 71
    facet.materialart.
    Unknown
    Extraterrestrial fiberglass production using solar energy (1979)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: A conceptual design is presented for fiberglass production systems in both lunar and space environments. The raw material, of lunar origin, will be plagioclase concentrate, high silica content slag, and calcium oxide. Glass will be melted by solar energy. The multifurnace in the lunar plant and the spinning cylinder in the space plant are unique design features. Furnace design appears to be the most critical element in optimizing system performance. A conservative estimate of the total power generated by solar concentrators is 1880 kW; the mass of both plants is 120 tons. The systems will reproduce about 90 times their total mass in fiberglass in 1 year. A new design concept would be necessary if glass rods were produced in space.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Ames Res. Center Space Resources and Space Settlements; p 225-232
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 72
    facet.materialart.
    Unknown
    Mutual assistance in space (1975)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: Operating principles, system functions, and technological problems associated with developing compatible spacecraft, station approach, and docking facilities between the U.S. and the U.S.S.R. are reported. Two designs, the probe cone and the androgynous docking device are examined.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Mod. Achievements of Cosmonautics (NASA-TT-F-16221); p 20-38
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 73
    facet.materialart.
    Unknown
    Unsteady flow in turbomachinery: An overview (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The importance of understanding and modeling the unsteady flow phenomena in turbomachinery is discussed. Historical events in the application and development of gas turbines for aircraft propulsion are traced. Technology advancements over the years are highlighted with focus on the compression system components. Trends in compressor research within the National Advisory Committee for Aeronautics (NACA)/National Aeronautics and Space Administration (NASA) are noted. The impact of technology advancements on the increased occurrences of unsteady flow related problems in advanced engine development programs is discussed. The impact of the new and more demanding requirements being imposed on the propulsion system to meet advanced aircraft mission needs are also noted. Brief discussions on the present day understanding and modeling capability of the unsteady flow phenomena are presented to include discussions on rotating stall, surge, flutter, forced response and noise generation.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Von Karman Inst. for Fluid Dynamics Unsteady Flow in Turbomachines, Vol. 1; p 1-20
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 74
    facet.materialart.
    Unknown
    Cascade variable-conductance heat pipe (A0076) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The objective is to verify the capability of a cascade variable conductance heat pipe (CVCHP) system to provide precise temperature control of long life spacecraft without the need for a feedback heater or other power sources for temperature adjustment under conditions of widely varying power input and ambient environment. Solar energy is the heat source and space the heat sink for thermally loading two series connected variable conductance heat pipes. Electronics and power supply equipment requirements are minimal. A 7.5 V lithium battery supplies the power for thermistor type temperature sensors for monitoring system performance, and a 28 V lithium battery supplies power for valve actuation.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 66-69
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 75
    facet.materialart.
    Unknown
    Transverse flat-plate heat pipe experiment (S1005) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The objective of this experiment is to evaluate the zero-g performance of a number of transverse flat plate heat pipe modules. Performance will include the transport capability of the pipes, the temperature drop, and the ability to maintain temperature over varying duty cycles and environments. Additionally, performance degradation, if any, will be monitored over the length of the Long Duration Exposure Facility (LDEF) mission. This information is necessary if heat pipes are to be considered for system designs where they offer benefits not available with other thermal control techniques.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 74-77
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 76
    facet.materialart.
    Unknown
    Low-temperature heat pipe experiment package (HEPP) for LDEF (S1001) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The principal objectives of the experiment are to determine zero-g start-up performance for conventional and diode low temperature heat pipes, to evaluate heat pipe performance in zero-g for an extended period of time, to determine zero-g transport capability of each heat pipe, and to determine diode operation, including forward conductance, turndown ratio, and transient behavior. Two heat pipes, a fixed conductance transporter heat pipe and a thermal diode heat pipe, are coupled with a radiant cooler system. Both pipes are charged with ethane. Also integrated with the radiator is a phase change material (PCM) canister which provides temperature stability during transport tests. N-heptane, which has a melting/freezing point of 182 K, is used as the PCM. The high heat capacity (28 W-hr of latent heat) provided by the canister permits high power heat pipe testing at constant temperature.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 70-73
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 77
    facet.materialart.
    Unknown
    Introduction to Long-Duration Exposure Facility (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A description of the structure and uses of the Long Duration Exposure Facility (LDEF) is given. The LDEF was designed to provide a large number of economical opportunities for science and technology experiments that require modest electrical power and data processing while in space and which benefit from postflight laboratory investigations with the retrieved experiment hardware. Like the Shuttle, the LDEF is reusable, and repeat missions are planned, each with a new complement of experiments. The LDEF is essentially a free-flying cylindrical structure. The experiments on LDEF are totally self-contained in trays mounted on the exterior of the structure. LDEF can accommodate 86 experiment trays, 72 around the circumference and 14 on the two ends. The LDEF is delivered to Earth orbit by the Shuttle. In orbit, the Shuttle remote manipulator system removes the LDEF from the Shuttle payload bay and places it in a gravity-gradient-stabilized attitude. After an extended period in orbit, which is set by experiment requirements, the LDEF is retrieved on a subsequent Shuttle flight.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 1-5
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 78
    facet.materialart.
    Unknown
    Analysis of low-g heat transfer for a cryogenic oxygen pressurization heater (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: After the external tank separates from the Orbiter about 2000 pounds of residual liquid oxygen remain in the main propulsion system lines. The pressurization of liquid oxygen from a subcritical to a supercritical state by the use of the heaters of the PRSA tanks while in a low-g environment is investigated. The performance of the heaters while bringing the state of the substance from the subcritical state to the supercritical one is studied, with particular emphasis on the time the pressurization process takes, and the temperature of the heater as the process proceeds.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Houston Univ. The 1981 NASA ASEE Summer Fac. Fellowship Program, Vol. 2; 38 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 79
    facet.materialart.
    Unknown
    The processing of semiconductor materials (1979)
    In:  CASI
    Details
    Publication Date: 2006-07-06
    Description: Five experiments involving the processing of semiconductor materials were performed during the Skylab mission. After discussions on semiconductors and their unique electronic properties, and techniques of crystal growth, these five experiments are presented. Four melt growth experiments were attempted: (1) steady state growth and segregation under zero gravity (InSb); (2) seeded, containerless solidification of InSb; (3) influence of gravity-free solidification on microsegregation; and (4) directional solidification of InSb-GaSb alloys. One vapor growth experiment, crystal growth by vapor transport, was attempted.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Early Space Expt. in Mater. Process.; 45 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 80
    facet.materialart.
    Unknown
    The promise of space processing (1979)
    In:  CASI
    Details
    Publication Date: 2006-07-06
    Description: The long exposure to a virtually zero-gravity environment is a truly unique situation that cannot be duplicated or even approximated for any length of time on earth. The topics discussed are: (1) low gravity; (2) atmospheric effects; (3) potential advantages of materials processing in space; (4) the absence of buoyancy-driven convection; (5) the absence of hydrostatic pressure; (6) the absence of sedimentation and buoyancy; (7) containerless processing; and (8) ultrahigh vacuum processing.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Early Space Expt. in Mater. Process.; 37 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 81
    facet.materialart.
    Unknown
    Summary and recommendations (1975)
    In:  CASI
    Details
    Publication Date: 2006-04-10
    Description: An economic analysis using econometric and cost benefit analysis techniques was performed to determine the feasibility of space processing of certain products. The overall objectives of the analysis were (1) to determine specific products or processes uniquely connected with space manufacturing, (2) to select a specific product or process from each of the areas of semiconductors, metals, and biochemicals, and (3) to determine the overall price/cost structure of each product or process considered. The economic elements of the analysis involved a generalized decision making format for analyzing space manufacturing, a comparative cost study of the selected processes in space vs. earth manufacturing, and a supply and demand study of the economic relationships of one of the manufacturing processes. Space processing concepts were explored. The first involved the use of the shuttle as the factory with all operations performed during individual flights. The second concept involved a permanent unmanned space factory which would be launched separately. The shuttle in this case would be used only for maintenance and refurbishment. Finally, some consideration was given to a permanent manned space factory.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Econ. Analysis of Materials Processing in Space; p 234-251
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 82
    facet.materialart.
    Unknown
    Economic analysis of materials processing in space: Introduction (1975)
    In:  CASI
    Details
    Publication Date: 2006-04-10
    Description: Space processing concepts investigated included an unmanned space factory, and a permanently launched factory. Product lines chosen for analysis were: (1) turbine blades, (2) tungsten targets for X-ray machines, (3) 1 sub G subclass separation by electrophoresis, and (4) high-price exotic crystals. The turbine blade, and 1 sub G products are considered promising candidates.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Econ. Analysis of Materials Processing in Space; p 1-7
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 83
    facet.materialart.
    Unknown
    Solution adaptive grid generation (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: NASA. Langley Research Center, Theoretical Aerodynamics Contractors' Workshop, Volume 2; p 651-68
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 84
    facet.materialart.
    Unknown
    Navier-Stokes solution for quasi-three dimensional flow (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: NASA. Langley Research Center, Theoretical Aerodynamics Contractors' Workshop, Volume 1; p 329-33
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 85
    facet.materialart.
    Unknown
    Vectorized, implicit Navier-Stokes solver for 2-D incompressible flows (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: NASA. Langley Research Center, Theoretical Aerodynamics Contractors' Workshop, Volume 1; p 273-31
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 86
    facet.materialart.
    Unknown
    Clebsch velocity decomposition for rotational conical flows (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: NASA. Langley Research Center, Theoretical Aerodynamics Contractors' Workshop, Volume 1; p 183-19
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 87
    facet.materialart.
    Unknown
    Transient thermocapillary flow in thin liquid layers (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Surface-Tension Gradient Induced Flows at Reduced Gravity; 24 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 88
    facet.materialart.
    Unknown
    Surface-tension gradient induced flows at reduced gravity, introduction (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Surface-Tension Gradient Induced Flows at Reduced Gravity; 21 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 89
    facet.materialart.
    Unknown
    Thermal convection during Bridgman crystal growth (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: Numerical experiments are used to study thermally driven flows which occur during vertical Bridgman crystal growth of a single component fluid. The solid-liquid interface was specified as parabolic and flow patterns were calculated for various insulation thicknesses, Grashof, Prandtl, and Biot numbers. When the melt is on top and the gravity vector is axially downward it is shown that flow persists as long as a radial temperature gradient is present. If the interface is convex, as viewed from the liquid, a single cell is observed. A concave interface exhibits multiple counterrotating cells. The insulation thickness and Grashof, Prandtl, and Biot numbers influence the flow in a quantitative manner.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Journal of Crystal Growth (ISSN 0022-0248); 68; 747-756
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 90
    facet.materialart.
    Unknown
    Coupled convective instabilities at crystal-melt interfaces (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: The stability of the parallel flow between a vertical crystal-melt interface and a vertical wall held at a temperature above the melting point of the crystal is analyzed for Prandtl numbers, P, ranging from 0.01 to 100. Three modes of instability occur: (1) a buoyant mode, (2) a shear mode, and (3) a coupled crystal-melt mode. The buoyant and shear modes are similar to those that occur for flow between two vertical rigid walls held at different temperatures. For Prandtl numbers greater than approximately two, the coupled crystal-melt mode occurs at a lower Grashof number than the other two modes. Specific results are given for succinonitrile (P = 22.8) and lead (P = 0.0225). These calculations and similar calculations for a cylindrical geometry were motivated by and are in general agreement with recent experiments on succinonitrile.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Journal of Crystal Growth (ISSN 0022-0248); 66; 514-524
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 91
    facet.materialart.
    Unknown
    Solidification behavior of low and high thermal conductivity materials in a Bridgman-Stockbarger furnace (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: The solid-liquid interface position and the temperature gradients in both the solid and liquid at the interface have been studied in a modified Bridgman-Stockbarger crystal growth furnace. These crystal growth factors have been studied as a function of ampoule translation rate, materials properties, and the size and temperature of a small auxiliary heater placed at the edge of the furnace hot zone. It has been found that the interface position with respect to a furnace reference point is essentially constant during a run for a low thermal conductivity material whereas the interface position changes continuously during a run with high thermal conductivity material. However, the ampoule translation rate and auxiliary heater conditions produce interface position changes in both high and low thermal conductivity materials.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Journal of Crystal Growth (ISSN 0022-0248); 69; 509-514
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 92
    facet.materialart.
    Unknown
    Influence of convection on the growth of crystals from solution (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: This is a review of the influence of convection on the growth of crystals from solution. The growth rate is increased by convection up to the point where interface kinetics becomes rate controlling. Compositional inhomogeneity and morphological instability (inclusion formation) are probably worse for gentle convection than for either no convection or for vigorous stirring. Stirring, particularly of crystal suspensions, can cause an orders of magnitude increase in the rate of formation of new crystals. This is called 'secondary nucleation'.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Journal of Crystal Growth (ISSN 0022-0248); 65; 133-142
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 93
    facet.materialart.
    Unknown
    Heat pipes in space: A NASA summary (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Experiences derived from the development, integration, and flight of NASA spacecraft and sounding rockets are presented. They include the International Heat Pipe Experiment, OAO 3, and ATS-6. Typical flight data are presented to show the performance.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: ESA Heat Pipes; p 647-653
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 94
    facet.materialart.
    Unknown
    Man in space - A time for perspective (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Factors affecting crew performances in long-term space flights are examined with emphasis on the Space Shuttle-Spacelab program. Biomedical investigations carried out during four Skylab missions indicate that initially rapid changes in certain physiological parameters, notably in cardiovascular response and red-blood-cell levels, lead to an adapted condition. Calcium loss remains a potential problem. Space Shuttle environmental control and life-support systems are described together with technology facilitating performance of mission objectives in a weightless environment. It is concluded that crew requirements are within the physical and psychological capability of astronauts, but the extent to which nonastronaut personnel will be able to participate without extensive training and pre-conditioning remains to be determined.
    Keywords: ASTRONAUTICS (GENERAL)
    Type: Astronautics and Aeronautics; 13; Oct. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 95
    facet.materialart.
    Unknown
    Empirical correlations for heat transfer and flow friction characteristics of rectangular offset-fin plate-fin heat exchangers (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 96
    facet.materialart.
    Unknown
    Inviscid interpenetration of two streams with unequal total pressures (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A theory is proposed for analyzing the inviscid interpretation of two streams in the case when the difference in total pressure between the streams is relatively small. A stream is considered which discharges from a nozzle or reservoir into a partially moving and partially stationary environment in such a way that the flows leave the solid boundaries in a tangential direction where the two streams first interact. The problem is solved by expanding in a small parameter related to the difference in total pressure between the streams, the zeroth-order solution is obtained by classical methods, and a technique similar to that employed in thin-airfoil theory is used to transfer the first-order boundary conditions to the zeroth-order boundary. A procedure is developed to transform the problem into one that can be solved by standard techniques of the theory of sectionally analytic functions. Solutions are obtained for flows with and without free streamlines, and the general theory is applied to several specific flow configurations.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Journal of Fluid Mechanics; 70; Aug. 12
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 97
    facet.materialart.
    Unknown
    Radiation exchange for a system with partially transmitting wall (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An approach is presented for applying the net radiation method developed by Siegel and Howell (1972) and Sparrow and Cess (1966) to systems involving opaque and partially transmitting walls. The results obtained from the basic equations for various values of plate emissivities and temperatures are presented in graphs. Attention is given to the window temperature relative to the temperature of the hot wall and the heat transferred relative to that transferred without the window.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Letters in Heat and Mass Transfer; 2; Mar
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 98
    facet.materialart.
    Unknown
    Derivation and application of the reciprocity relations for radiative transfer with internal illumination (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A Green's function formulation is used to derive basic reciprocity relations for planar radiative transfer in a general medium with internal illumination. Reciprocity (or functional symmetry) allows an explicit and generalized development of the equivalence between source and probability functions. Assuming similar symmetry in three-dimensional space, a general relationship is derived between planar-source intensity and point-source total directional energy. These quantities are expressed in terms of standard (universal) functions associated with the planar medium, while all results are derived from the differential equation of radiative transfer.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Journal of Quantitative Spectroscopy and Radiative Transfer; 15; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 99
    facet.materialart.
    Unknown
    Radiation from an array of longitudinal fins of triangular profile (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Radiation from an array of longitudinal fins of triangular profile is analyzed, including fin-to-fin and fin-to-base interactions. The effect of base cylinder radiation and the fin-base radiative interaction is found to be significant for fin width/tube radius ratios less than 8. Results presented may be used to optimize the design of a fin array with respect to weight.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: AIAA Journal; 13; May 1975
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 100
    facet.materialart.
    Unknown
    Comment on 'subsonic and supersonic boundary-layer flow past a wavy wall' (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: AIAA Journal; 13; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...