ALBERT

Description: This release note discusses the planetary transit search data products produced by the Science Processing Operations Center at Ames Research Center from Sectors 1-2 observations made with the TESS (Transiting Exoplanet Survey Satellite) spacecraft and cameras as a means to document instrument performance and data characteristics.

Description: The Compass Final Report: Europa Tunnelbot, is a summary of three Compass concurrent engineering team designs for penetrating the ice of Europa and reaching the ocean, while sampling for biomarkers and communicating back to the surface. These conceptual designs, while providing complete conceptual layouts for these penetrators, or 'Tunnelbots' along with the associated communication 'Repeaters' primarily focused on the power and thermal systems needed for these devices. Trades for these systems will provide advantages and challenges for each option. These results will be used to guide power technology development.

Description: In order to observe the lunar sodium exosphere out to one-half degree around the Moon, we designed, built and installed a small robotically controlled coronagraph at the Winer Observatory in Sonoita, Arizona. Observations are obtained remotely every available clear night from our home base at Goddard Space Flight Center or from Prescott, Arizona. We employ an Andover temperature-controlled 1.5-angstrom-wide narrow-band filter centered on the sodium D2 line, and a similar 1.5-angstrom filter centered blueward of the D2 line by 3 angstroms for continuum observations. Our data encompass lunations in 2015, 2016, and 2017, thus we have a long baseline of sodium exospheric calibrated images. During the course of three years we have refined the observational sequence in many respects. Therefore this paper only presents the results of the spring, 2017, observing season. We present limb profiles from the south pole to the north pole for many lunar phases. Our data do not fit any power of cosine model as a function of lunar phase or with latitude. The extended Na exosphere has a characteristic temperature of about 22506750 degrees Kelvin, indicative of a partially escaping exosphere. The hot escaping component may be indicative of a mixture of impact vaporization and a sputtered component.

Description: We present Zwicky Transient Facility (ZTF) observations of the tidal disruption flare AT2018zr/PS18kh reported by Holoien et al. and detected during ZTF commissioning. The ZTF light curve of the tidal disruption event (TDE) samples the rise-to-peak exceptionally well, with 50 days of g- and r-band detections before the time of maximum light. We also present our multi-wavelength follow-up observations, including the detection of a thermal (kT 100 eV) X-ray source that is two orders of magnitude fainter than the contemporaneous optical/UV blackbody luminosity, and a stringent upper limit to the radio emission. We use observations of 128 known active galactic nuclei (AGNs) to assess the quality of the ZTF astrometry, finding a median host-flare distance of 0farcs2 for genuine nuclear flares. Using ZTF observations of variability from known AGNs and supernovae we show how these sources can be separated from TDEs. A combination of light-curve shape, color, and location in the host galaxy can be used to select a clean TDE sample from multi-band optical surveys such as ZTF or the Large Synoptic Survey Telescope.

Description: This release note discusses the science data products produced by the Science Processing Operations Center at Ames Research Center from the Sector 1-9 transiting planet search with observations made with the TESS spacecraft and cameras as a means to document instrument performance and data characteristics.

Description: We present multiwavelength observations of the tidal disruption event (TDE) iPTF15af, discovered by the intermediate Palomar Transient Factory survey at redshift z = 0.07897. The optical and ultraviolet (UV) light curves of the transient show a slow decay over 5 months, in agreement with previous optically discovered TDEs. It also has a comparable blackbody peak luminosity of L(sub peak) approx. = 1.5 x 10(exp 44) erg s(exp -1). The inferred temperature from the optical and UV data shows a value of (35) 10(exp 4) K. The transient is not detected in X-rays up to L(sub X) 〈 3 x 10(exp 42) erg s(exp -1) within the first 5 months after discovery. The optical spectra exhibit two distinct broad emission lines in the He ii region, and at later times also H emission. Additionally, emission from [N iii] and [O iii] is detected, likely produced by the Bowen fluorescence effect. UV spectra reveal broad emission and absorption lines associated with high-ionization states of N v, C iv, Si iv, and possibly P v. These features, analogous to those of broad absorption line quasars (BAL QSOs), require an absorber with column densities N(sub H) 〉 10(exp 23) cm(exp -2). This optically thick gas would also explain the nondetection in soft X-rays. The profile of the absorption lines with the highest column density material at the largest velocity is opposite that of BAL QSOs. We suggest that radiation pressure generated by the TDE flare at early times could have provided the initial acceleration mechanism for this gas. Spectral UV line monitoring of future TDEs could test this proposal.

Description: The first measurements of infrared (IR) band intensities of solid dimethyl carbonate are presented along with measurements of this compounds refractive index and density near 15 K, neither of which has been reported. Molar refractions are used to compare these results to other new data from ices made of methyl acetate, acetone, acetic acid, and acetaldehyde, four molecules known to exist in the interstellar medium. Comparisons are made to IR intensities taken from the literature on amorphous ices. The value and importance of comparisons based on molecular structures, to predict and test laboratory results, are highlighted.

Description: We have adapted the algorithmic tools developed during the Kepler mission to vet the quality of transit-like signals for use on the K2 mission data. Using the four sets of publicly available light curves at MAST, we produced a uniformly vetted catalog of 772 transiting planet candidates from K2 as listed at the NASA Exoplanet Archive in the K2 Table of Candidates. Our analysis marks 676 of these as planet candidates and 96 as false positives. All confirmed planets pass our vetting tests. Sixty of our false positives are new identifications, effectively doubling the overall number of astrophysical signals mimicking planetary transits in K2 data. Most of the targets listed as false positives in our catalog show either prominent secondary eclipses, transit depths suggesting a stellar companion instead of a planet, or significant photocenter shifts during transit. We packaged our tools into the open-source, automated vetting pipeline Discovery and Vetting of Exoplanets (DAVE), designed to streamline follow-up efforts by reducing the time and resources wasted observing targets that are likely false positives. DAVE will also be a valuable tool for analyzing planet candidates from NASA's TESS mission, where several guest-investigator programs will provide independent light-curve setsand likely many more from the community. We are currently testing DAVE on recently released TESS planet candidates and will present our results in a follow-up paper.

Description: This release note discusses the planetary transit search data products produced by the Science Processing Operations Center at Ames Research Center from Sectors 1-6 observations made with the TESS (Transiting Exoplanet Survey Satellite) spacecraft and cameras as a means to document instrument performance and data characteristics.

Description: Most violent and energetic processes in our universe, including mergers of compact objects,explosions of massive stars and extreme accretion events, produce copious amounts of X-rays. X-ray follow-up is an efficient tool for identifying transients: (1) X-rays can quickly localize transients with large error circles; (2) X-rays reveal the nature of transients that may not have unique signatures at other wavelengths. Here, we identify key science questions about several extragalactic multi-messenger andmulti-wavelength transients, and demonstrate how X-ray follow-up helps answer these questions.

Description: In 2012 during the entry, descent, and landing of the Mars Science Laboratory (MSL), the MSL Entry, Descent, and Landing Instrumentation (MEDLI) sensor suite was collecting in-flight heatshield pressure and temperature data. The data collected by the MEDLI instruments has since been used for reconstruction of vehicle aerodynamics, atmospheric conditions, aerothermal heating, and Thermal Protection System (TPS) performance as well as material response model validation and refinement. The Mars Entry, Descent, and Landing Instrumentation 2 (MEDLI2) sensor suite for the Mars 2020 heatshield and backshell is being designed to expand on the measurements and knowledge gained from MEDLI. Similar to MEDLI, MEDLI2 will measure the pressure and temperature of the heatshield. MEDLI2 will additionally measure the temperature, pressure, total heat flux, and radiative heat flux on the backshell.Since the backshell instrumentation is new to MEDLI2, Do No Harm (DNH) testing was conducted on instrumented backshell TPS (SLA-561V) panels. The panels consisted of four pressure port holes, one Mars Entry Atmospheric Data System (MEADS) pressure port plug, one MEDLI2 Integrated Sensor Plug (MISP) thermal plug, and one heat flux sensor. DNH testing was conducted to ensure the performance of the TPS was not degraded due to sensor integration and to characterize any TPS performance changes. The testing consisted of environmental testing vibration, shock, thermal vacuum (TVAC) cycling and bounding aerothermal (arc jet) testing. During arc jet testing, the heat flux sensors embedded in the SLA-561V panels exhibited an unexpected temporary reduction in the heat flux sensor temperature and response. After review of the test results, it was determined that this unexpected response was confined to the two heat flux sensors that experienced the greatest thermal shock condition. This condition consisted of a liquid nitrogen (LN2) bath that induced temperatures of approximately -190C, and then a transition (thermal shock) to an arc jet test at a heat rate of approximately 21 W/cm2. Both heat flux sensors that were exposed to this thermal shock experienced a blister in the thermal coating during the arc jet test.Two heat flux sensor thermal shock test series were performed to investigate the cause of the blistering and subsequent energy release. In these tests, the heat flux sensor was first cold soaked in either a dry ice or LN2 bath to induce temperatures of approximately -78C or -190C, respectively. Then the sensors were thermally shocked using two propane torches with a heat rate of either approximately 8 W/cm2 or 21 W/cm2. The key findings indicated that there is a correlation between thermal shock and the blistering observed in the DNH test series, and that the cause appeared to be rooted in the heat flux sensor epoxy that encapsulates the sensor thermopile.Since the heat flux sensors are required to measure heat fluxes up to 15 W/cm2 during the Mars 2020 entry, a third test series was designed to determine if blistering is an issue at this maximum expected flight heat flux. Results from all three thermal shock test series and a discussion about whether or not blistering of the heat flux sensor thermal coating could be an issue for the Mars 2020 mission will be presented.

Description: Seeker is an automated extravehicular free-flying inspector CubeSat designed and built in-house at the Johnson Space Center (JSC). As a Class 1E project funded by the International Space Station (ISS) Program, Seeker had a streamlined process to flight certification, but the vehicle had to be designed, developed, tested, and delivered within approximately one year after authority to pro-ceed (ATP) and within a $1.8 million budget. These constraints necessitated an expedited Guidance, Navigation, and Control (GNC) development schedule, development began with a navigation sensor trade study using Linear Covariance (LinCov) analysis and a rapid sensor downselection process, resulting in the use of commercial off-the-shelf (COTS) sensors which could be procured quickly and subjected to in-house environmental testing to qualify them for flight. A neural network was used to enable a COTS camera to provide bearing measurements for visual navigation. The GNC flight software (FSW) algorithms utilized lean development practices and leveraged the Core Flight Software (CFS) architecture to rapidly develop the GNC system, tune the system parameters, and verify performance in simulation. This pace was anchored by several Hardware-Software Integration (HSI) milestones, which forced the Seeker GNC team to develop the interfaces both between hardware and software and between the GNC domains early in the project and to enable a timely delivery.

Description: This release note discusses the science data products produced by the Science Processing Operations Center at Ames Research Center from Sector 3 observations made with the TESS spacecraft and cameras as a means to document instrument performance and data characteristics.

Description: This release note discusses the planetary transit search data products produced by the Science Processing Operations Center at Ames Research Center from Sectors 1-3 observations made with the TESS spacecraft and cameras as a means to document instrument performance and data characteristics.

Description: No abstract available

Description: No abstract available

Description: This release note discusses the science data products produced by the Science Processing Operations Center at Ames Research Center from Sector 7 observations made with the TESS spacecraft and cameras as a means to document instrument performance and data characteristics.

Description: OuroboroSat (also known as MRMSS: the Modular Rapidly Manufactured Spacecraft System) is a modular instrumentation platform consisting of multiple 3 inch (7.5 centimeter) square printed circuit boards that are mechanically and electrically connected to one another in order to produce a fully- functioning payload facility system. Each OuroboroSat module consists of a microcontroller, a battery, conditioning and monitoring circuitry for the battery, optional space for solar panels, and an expansion area where an experimental payload or specialized functionality (such as wireless communication submodules) can be attached.

Description: NASA's Determination of Offgassed Products (Test 7) from materials and assembled articles for spaceflight has evolved since the Apollo program for over 50 years to meet various habitable spacecraft nonmetallic programmatic requirements. Now mandated by NASA STD-6016A, Standard Materials and Processes Requirements for Spacecraft, all nonmetallic materials used in habitable flight compartments, with the exception of ceramics, metal oxides, inorganic glasses, and materials used in sealed containers, must meet the offgassing requirements in NASA-STD-6001B Test 7. This manuscript presents the history of Test 7, beginning with the Apollo spacecraft nonmetallic materials selection guidelines and test requirements in 1967, in which tests were performed in mostly oxygen atmospheres. It progresses through Skylab, Space Shuttle, International Space Station nonmetals testing, and acceptance requirements with milder test environments. This review of the history of Test 7 presents the reader with a perspective on the development and changes undergone since inception to the present. Related NASA standard tests (some now former, discontinued, combined, or supplemental) including Test 6, Odor Assessment, Test 16, Determination of Offgassed Products from Assembled Articles, and Test 12, Total Spacecraft Cabin Offgassing, are discussed in context

Description: The Lunar Reconnaissance Orbiter (LRO) was launched in 2009 and, with itsseven science instruments, has made numerous contributions to our understandingof the moon. LRO is in an elliptical, polar lunar orbit and nominally maintainsa nadir orientation. There are frequent slews off nadir to observe various sciencetargets. LRO attitude control system (ACS) has two star trackers and a gyro forattitude estimation in an extended Kalman filter (EKF) and four reaction wheelsused in a proportional-integral-derivative (PID) controller. LRO is equipped withthrusters for orbit adjustments and momentum management. In early 2018, thegyro was powered off following a fairly rapid decline in the laser intensity on theX axis. Without the gyro, the EKF has been disabled. Attitude is provided by asingle star tracker and a coarse rate estimate is computed by a back differencingof the star tracker quaternions. Slews have also been disabled. A new rate estimationapproach makes use of a complementary filter, combining the quaterniondifferentiated rates and the integrated PID limited control torque (with reactionwheel drag and feedforward torque removed). The filtered rate estimate replacesthe MIMU rate in the EKF, resulting in minimal flight software changes. The paperwill cover the preparation and testing of the new gyroless algorithm, both inground simulations and inflight.

Description: This release note discusses the science data products produced by the Science Processing Operations Center at Ames Research Center from Sector 8 observations made with the TESS spacecraft and cameras as a means to document instrument performance and data characteristics.

Description: This release note discusses the science data products produced by the Science Processing Operations Center at Ames Research Center from Sector 4 observations made with the TESS spacecraft and cameras as a means to document instrument performance and data characteristics.

Description: This release note discusses the science data products produced by the Science Processing Operations Center at Ames Research Center from Sector 6 observations made with the TESS spacecraft and cameras as a means to document instrument performance and data characteristics.

Description: This release note discusses the science data products produced by the Science Processing Operations Center at Ames Research Center from Sector 5 observations made with the TESS spacecraft and cameras as a means to document instrument performance and data characteristics.

Description: The Orion European Service Module - Structural Test Article (E-STA) underwent sine vibration testing in 2016 using the Mechanical Vibration Facility (MVF) multi-axis shaker system at NASA Glenn Research Centers (GRC) Plum Brook Station (PBS) Space Power Facility (SPF). The main objective was to verify the structural integrity of the European Service Module (ESM) under sine sweep dynamic qualification vibration testing. A secondary objective was to perform a fixed-base modal survey, while E-STA was still mounted to MVF, in order to achieve a test correlate the finite element model (FEM). To facilitate the E-STA system level correlation effort, a building block test approach was implemented. Modal tests were performed on two major subassemblies, the crew module/launch abort structure (CM/LAS) and the crew module adapter (CMA) mass simulators. These subassembly FEMs were individually correlated and then integrated into the E-STA FEM prior to the start of the E-STA sine vibration test. This paper summarizes the modal testing and model correlation efforts of both of these subassemblies and how the building block approach assisted in the overall correlation of the E-STA FEM. This paper will also cover modeling practices that should be avoided, recommended instrumentation positioning on complex structures, and the importance of the FEM geometrically matching CAD in sufficient detail in order to adequately replicate internal load paths. The goal of this paper is to inform the reader of the hard earned lessons learned and pitfalls to avoid when applying a building block test approach.

Description: Advances in Entry Systems Technologies -- Continuing the Ames' Innovation Heritage" will provide an overview of recent accomplishments in the areas of entry systems, TPS materials, arcjet testing, etc.Hypervelocity Entry is a Hard Problem !Use of atmospheric drag is the most efficient way to slow down. Protection fromthe entry heating demands comprehensive understanding of the hypervelocity,reacting flow (aero-thermodynamics), and selection, design, testing and verificationof the integrated entry system, especially thermal protection system.

Description: Atomic oxygen erosion of polymers in low Earth orbit (LEO) poses a serious threat to spacecraft performance and durability. Forty thin film polymer and pyrolytic graphite samples, collectively called the PEACE (Polymer Erosion and Contamination Experiment) Polymers, were exposed to the LEO space environment on the exterior of the ISS for nearly four years as part of the Materials International Space Station Experiment 1 & 2 (MISSE 1 & 2) mission. The purpose of the MISSE 2 PEACE Polymers experiment was to determine the atomic oxygen (AO) erosion yield (E(sub y), volume loss per incident oxygen atom) of a wide variety of polymers exposed to the LEO space environment. The Ey values were determined based on mass loss measurements. Because many polymeric materials are hygroscopic, the pre-flight and post-flight mass measurements were obtained using dehydrated samples. To maximize the accuracy of the mass measurements, obtaining dehydration data for each of the polymers was desired to ensure that the samples were fully dehydrated before weighing. A comparison of dehydration and rehydration data showed that rehydration data mirrors dehydration data, and is easier and more reliable to obtain. Tests were also conducted to see if multiple samples could be dehydrated and weighed sequentially. Rehydration curves of 43 polymers and pyrolytic graphite were obtained. This information was used to determine the best pre-flight, and post-flight, mass measurement procedures for the MISSE 2 PEACE Polymers experiment, and for subsequent NASA Glenn Research Center MISSE polymer flight experiments.

Description: On 5 February 2015, a previously unknown meteor shower, the Lyrids were observed for the first time. Because of the Sun-Earth-Moon viewing geometry, however, stream members were observed almost exclusively by the Canadian Meteor Orbit Radar (CMOR). The Lyrids did not appear again until 2018, and that outburst was stronger than in 2015. This study analyzed the 2015 and 2018 CMOR data in order to determine the orbital parameters of the stream in an attempt to determine the Lyrid parent body. Of primary importance is to determine if the Lyrids will recur in a predictable manner. Two bodies, with dramatically different orbital parameters and evolutionary behaviors, emerged as the leading candidates: 2003 EH1 and 1854 R1.

Description: Spacecraft charging can occur when a spacecraft vehicle is subject to space plasma environments and varying sunlit conditions. The trajectory of the spacecraft will determine the specific impinging environment while the spacecraft geometry and material properties determine the susceptibility to various charging issues. In general, spacecraft charging is separated into two categories, surface charging (~〈100 keV) and internal charging (~〉100keV).

Description: Planetary entry vehicles employ ablative TPS materials to shield the aeroshell from entry aeroheating environments. To ensure mission success, it must be demonstrated that the heat shield system, including local features such as seams, does not fail at conditions that are suitably margined beyond those expected in flight. Furthermore, its thermal response must be predictable, with acceptable fidelity, by computational tools used in heat shield design. Mission assurance is accomplished through a combination of ground testing and material response modelling. A material's robustness to failure is verified through arcjet testing while its thermal response is predicted by analytical tools that are verified against experimental data. Due to limitations in flight-like ground testing capability and lack of validated high-fidelity computational models, qualification of heat shield materials is often achieved by piecing together evidence from multiple ground tests and analytical simulations, none of which fully bound the flight conditions and vehicle configuration. Extreme heating environments (〉2000 W/sq. cm heat flux and 〉2 atm pressure), experienced during entries at Venus, Saturn and Ice Giants, further stretch the current testing and modelling capabilities for applicable TPS materials. Fully-dense Carbon Phenolic was the material of choice for these applications; however, since heritage raw materials are no longer available, future uses of re-created Carbon Phenolic will require re-qualification. To address this sustainability challenge, NASA is developing a new dual-layer material based on 3D weaving technology called Heat shield for Extreme Entry Environments (HEEET). Regardless of TPS material, extreme environments pose additional certification challenges beyond what has been typical in recent NASA missions. Scope of this presentation: This presentation will give an overview of challenges faced in verifying TPS performance at extreme heating conditions. Examples include: (1) Bounding aeroheating parameters (heat flux, pressure, shear and enthalpy) in ground facilities. How to certify TPS if environments can't be bounded or aeroheating parameters can't be simultaneously achieved. (2) Higher uncertainties in ground test environments (facility calibration and analytical predictions) at extreme conditions. (3) Testing in flows similar to planetary atmosphere composition (H2/He for Gas and Ice Giants). (4) Test sample size limitations for qualifying seam designs. (5) Lack of computational tools capable of simulating all significant aspects of TPS performance (including initiation and propagation of failures). This presentation will provide recommendations on how the EDL community can address these challenges and mitigate some of the risks involved in flying TPS materials at extreme conditions. Examples include: (1) Dedicated activity to understanding TPS failure modes. Develop computational tools capable of modelling fluid interaction with material's thermostructural response. Validate these tools through failure testing. A better understanding of failure mechanisms may eliminate the need to fully bound all aeroheating parameters in ground testing. (2) Enhancements to current testing facilities to simulate flight-like ablation mechanism (ex. testing in Nitrogen at Ames Interaction Heating Facility to limit oxidation in favor of more sublimation). (3) Improved characterization of test conditions with new diagnostic methods and determination of environment uncertainty through rigorous statistical analysis of available data. (4) Design margin policies that are directly tied to uncertainties in ground test environments and modelling fidelity

Description: Vibration testing spaceflight hardware is a vital, but time consuming and expensive endeavor. Traditionally modal tests are performed at the component, subassembly, or system level, preferably free-free with mass loaded interfaces or fixed base on a seismic mass to identify the fundamental structural dynamic (modal) characteristics. Vibration tests are then traditionally performed on single-axis slip tables at qualification levels that envelope the maximum predicted flight environment plus 3 dB and workmanship in order to verify the spaceflight hardware can survive its flight environment. These two tests currently require two significantly different test setups, facilities, and ultimately reconfiguration of the spaceflight hardware. The vision of this research is to show how traditional fixed-base modal testing can be accomplished using vibration qualification testing facilities, which not only streamlines testing and reduces test costs, but also opens up the possibility of performing modal testing to untraditionally high excitation levels that provide for test-correlated finite element models to be more representative of the spaceflight hardware's response in a flight environment. This paper documents the first steps towards this vision, which is the comparison of modal parameters identified from a traditional fixed-based modal test performed on a modal floor and those obtained by utilizing a fixed based correction method with a large single-axis electrodynamic shaker driving a slip table supplemented with additional small portable shakers driving on the slip table and test article. To show robustness of this approach, the test article chosen is a simple linear weldment, whose mass, size, and modal parameters couple well with the dynamics of the shaker/slip table. This paper will show that all dynamics due to the shaker/slip table were successfully removed resulting in true fixed-base modal parameters, including modal damping, being successfully extracted from a traditional style base-shake vibration test setup.

Description: Space structures are one of the most critical components for any spacecraft, as they must provide the maximum amount of livable volume with the minimum amount of mass. Deployable structures can be used to gain additional space that would not normally fit under a launch vehicle shroud. This expansion capability allows it to be packed in a small launch volume for launch, and deploy into its fully open volume once in space. Inflatable, deployable structures in particular, have been investigated by NASA since the early 1950s and used in a number of spaceflight applications. Inflatable satellites, booms, and antennas can be used in low-Earth orbit applications. Inflatable heatshields, decelerators, and airbags can be used for entry, descent and landing applications. Inflatable habitats, airlocks, and space stations can be used for in-space living spaces and surface exploration missions. Inflatable blimps and rovers can be used for advanced missions to other worlds. These applications are just a few of the possible uses for inflatable structures that will continued to be studied as we look to expand our presence throughout the solar system.

Description: Plans call for human cislunar operations and lunar surface access, to prepare for eventual Mars missions. NASA will also develop new opportunities in lunar orbit that provide the foundation and act as a gateway for human exploration deeper into the solar system. Current human spaceflight is complex and requires as many as fifty people to support the International Space Station (ISS) Mission Control Center (MCC) in Houston, Texas. These flight controllers in the front and back rooms of the MCC, serve as an extra pair of eyes overseeing the numerous station systems. Deep space missions - to the moon, Mars, and beyond - will be more complex and place challenging mission constraints on the crew. As the round-trip communication delays increase in deep space exploration, more on-board systems autonomy and functionality will be needed to maintain and control the vehicle. These mission constraints will change the Earth-based ground control approach and will demand efficient and effective human-computer interfaces (HCI) to control a highly complex vehicle or habitat system. All of this necessitates a different approach to designing and developing spacecraft and habitats. In the beginning of new human spaceflight programs, focus is typically on launch vehicle and uncrewed spacecraft design and development. The reasoning behind this focus to enable flight testing of an integrated launch vehicle and spacecraft system to ensure it will be safe enough to allow humans on board. This is an essential process for new spacecraft, however, the practical effect is a lack of funding for the spacecrafts human interfaces development. It can be many years before the human interface development begins, putting it late in the spacecraft lifecycle, when almost all other spacecraft systems and subsystems are already in place. This forces the usage of existing and proven technologies for the HCI interfaces. We posit that putting the human first in a spacecraft design process will yield a more effective spacecraft for exploration and long duration missions. NASA Human Research Program (HRP) has identified inadequate HCI as a risk for future missions. New tools and procedures to aid the crew in operating a complex spacecraft will be required. This paper discusses ongoing activities in the development of the next generation HCI components and systems, and a new approach toward human interfaces for spacecraft.

Description: This release note discusses the science data products produced by the Science Processing Operations Center at Ames Research Center from Sector 2 observations made with the TESS spacecraft and cameras as a means to document instrument performance and data characteristics.

Description: Astronauts on a mission to Mars will require several vehicles working together to get to Mars orbit, descend to the surface of Mars, support them while theyre there, and return them to Earth. The Mars Ascent Vehicle (MAV) transports the crew off the surface of Mars to a waiting Earth return vehicle in Mars orbit and is a particularly influential part of the mission architecture because it sets performance requirements for the lander and in-space transportation vehicles. With this in mind, efforts have been made to minimize the MAV mass, and its impact on the other vehicles. A minimal mass MAV design using methane and in situ generated oxygen propellants was presented in 2015. Since that time, refinements have been made in most subsystems to incorporate findings from ongoing research into key technologies, improved understanding of environments and further analysis of design options. This paper presents an overview of the current MAV reference design used in NASAs human Mars mission studies, and includes a description of the operations, configuration, subsystem design, and a vehicle mass summary.

Description: NASA's Determination of Offgassed Products (Test 7) from materials and assembled articles for spaceflight has evolved since the Apollo program for over 50 years to meet various habitable spacecraft non-metallic programmatic requirements. Now mandated by NASA-STD-6016B Standard Materials and Processes Requirements for Spacecraft, all nonmetallic materials used in habitable flight compartments,with the exception of ceramics, metal oxides, inorganic glasses, and materials used in sealed containers must meet the offgassing requirements of in NASA-STD-6001B Test 7. This manuscript presents the history of Test 7 beginning with the Apollo spacecraft nonmetallic materials selection guidelines and test requirements in 1967

Description: Impact cratering is the dominant geo-logic process affecting the surfaces of solid bodies throughout our solar system. Because large impacts are (luckily) rare on Earth, the process is studied through experiments, observations of existing structures, numerical modeling, and theory, most of which make the simplifying assumptions that the target is homogeneous, with no substantial topography. Craters do not always form on level targets com-posed of homogeneous loose material. Rather (Fig. 1), they often form on sloped surfaces and in layered tar-gets, both of which significantly influence the excavation and ejecta deposition processes. Such craters are common on the Moon and asteroids. We are investigating crater formation in two separate suites of experiments using sloped and layered targets (Fig. 2) at the Experimental Impact Laboratory at NASA Johnson Space Center. An experiment was also performed in a flat, homogenous target to serve as a reference.

Description: Over the past 50 years, great advances have been achieved in both analytical modal analysis (i.e. finite element models and analysis) and experimental modal analysis (i.e. modal testing) in aerospace and other fields. With the advent of more powerful computers, higher performance instrumentation and data acquisition systems, and powerful linear modal extraction tools, analysts and test engineers have a breadth and depth of technical resources only dreamed of by our predecessors. However, some observed recent trends indicate that hard lessons learned are being forgotten or ignored, and possibly fundamental concepts are not being understood. These trends have the potential of leading to the degradation of the quality of and confidence in both analytical and test results. These trends are a making of our own doing, and directly related to having ever more powerful computers, programmatic budgetary pressures to limit analysis and testing, and technical capital loss due to the retirement of the senior component of a bimodal workforce. This paper endeavors to highlight some of the most important lessons learned, common pitfalls to hopefully avoid, and potential steps that may be taken to help reverse this trend.

Description: The Photon Sieve (PS) team at NASA Langley Research Center (LaRC) began receiving support for the development and characterization of PS devices through the NASA Internal Research & Development Program (IRAD) in 2015. The project involves ascertaining the imaging characteristics of various PS devices. These devices hold the potential to significantly reduce mission costs and improve imaging quality by replacing traditional reflector telescopes. The photon sieve essentially acts as a lens to diffract light to a concentrated point on the focal plane like a Fresnel Zone Plate (FZP). PSs have the potential to focus light to a very small spot which is not limited by the width of the outermost zone as for the FZP and offers a promising solution for high resolution imaging. In the fields of astronomy, remote sensing, and other applications that require imaging of distant objects both on the ground and in the sky, it is often necessary to perform post-process filtering in order to separate noise signals that arise from multiple scattering events near the collection optic. The PS exhibits a novel filtering technique that rejects the unwanted noise without the need for time consuming post processing of the images. This project leverages key Langley resources to design, manufacture, and characterize a series of photon sieve specimens. After a prototype was developed and characterized in the Langley ISO5 optical cleanroom and laboratory, outside testing was conducted via the capture of images of the moon by using a telescopic setup. This next goal of the project is to design and develop a telescope and image capture system as a drone-based instrument payload. The vehicle utilized for the initial demonstration was a NASA hive model 1200 XE-8 research Unmanned Aerial Vehicle (UAV), capable of handling a 20-pound maximum payload with a 25-minute flight time. This NASA Technical Memorandum (NASA-TM) introduces preliminary results obtained using a PS-based imaging system on the UAV. The next version of the telescope structure will be designed around diffractive optical components and commercially available camera electronics to create a lightweight payload.

Description: Inflatable space structures have the potential to significantly reduce the required launch volume of large crewed pressure vessels for space exploration missions. Mass savings can also be achieved via the use of high specific strength softgoods materials, and the reduced design penalty from launching the structure in a densely packaged state. Inflatable softgoods structures have been investigated since the late 1950's, and several major development programs at NASA and in industry have helped advance the state-of-the-art in this technology area. This paper discusses the design, analysis, structural testing, and potential applications for inflatable softgoods structures. In particular, this paper will discuss the design of the multi-layer softgoods shell (inner layer, bladder, structural restraint layer, micrometeoroid orbital debris protection layers, thermal insulation layers, and atomic oxygen layer (for low earth orbit) and the results of material and module-level testing that has been conducted over the past two decades at NASA. Finally, the current utilization of expandable spacecraft structures is discussed, as well as potential future applications including airlocks and habitats on the Lunar Orbital Platform-Gateway, and the surface of the Moon and Mars.

Description: No abstract available

Description: Microsecond sparks and the resulting plume of hot gas/plasma were examined against a parametric pressure-distance matrix. Schlieren imaging is used to capture the spatial and temporal location of spark discharge exhaust for two milliseconds. Low pressure and larger gap widths created the largest size and intensity signal for the spark-affected plumes. Experimental exit-plume velocities trend well with analytic predictions using a mean pressure between the chamber and atmospheric conditions. Due to the quadratic relation of the annulus area and gap width, larger gap width velocities are more accurately represented by analytic predictions using atmospheric pressure as the larger exit area restricts the flow less. The same pressure adjustment, when applied to breakdown voltages, improves data alignment with Paschens Curve.

Description: This paper describes a new operational capability for fast attitude maneuvering that is being developed for the Lunar Reconnaissance Orbiter (LRO). The LRO hosts seven scientific instruments. For some instruments, it is necessary to per-form large off-nadir slews to collect scientific data. The accessibility of off-nadir science targets has been limited by slew rates and/or occultation, thermal and power constraints along the standard slew path. The new fast maneuver (FastMan) algorithm employs a slew path that autonomously avoids constraint violations while simultaneously minimizing the slew time. The FastMan algo-rithm will open regions of observation that were not previously feasible and improve the overall science return for LRO's extended mission. The design of an example fast maneuver for LRO's Lunar Orbiter Laser Altimeter that reduc-es the slew time by nearly 40% is presented. Pre-flight, ground-test, end-to-end tests are also presented to demonstrate the readiness of FastMan. This pioneer-ing work is extensible and has potential to improve the science data collection return of other NASA spacecraft, especially those observatories in extended mission phases where new applications are proposed to expand their utility.

Description: This PowerPoint presentation will discuss a new small spacecraft architecture which takes advantage of ESPA Class rideshare opportunities.

Description: Airdrop testing of parachutes is a complicated endeavor that requires the custom design and certification of many critical components. The most direct path to certifying a component is to perform full scale testing with margin over the maximum loads expected to be seen in operation. However, other constraints often preclude the opportunity to perform full scale testing. In this paper, we present a case study where a problem arises in a joint that had been certified with a full scale test. There was no time or budget available to repeat the full scale testing after a redesign of the joint. Instead, we present a method of testing each failure mode at the component level to support a certification by analysis approach. The analysis itself was not complicated, but tradeoffs had to be made between different failure modes to arrive at the optimal design. The same approach was also applied back to the original joint to confirm that the failure mode that was not seen in full scale testing would have been caught by the proposed analysis. In the end, the new design was certified by analysis and worked without issue for the final six airdrop tests that used this joint.

Description: The Orion Capsule Parachute System (CPAS) project has completed qualification testing. Throughout the airdrop test program, CPAS employed a number of test techniques, including Low Velocity Air Drop (LVAD), single parachute darts, subscale parachute airdrop, and full scale capsule and dart airdrop tests. This paper will discuss the advantages and disadvantages for each type of test technique, the challenges encountered, and the lessons learned. Special attention will be given to the issues and solutions required to perform airdrop test extraction at 35,000 feet above mean sea level (MSL).

Description: This paper presents the first set of experimental results from Laser Enhanced Arc-Jet Facility (LEAF-Lite) tests that were conducted shortly after the radiative LEAF-Lite system was added to the 60-MW Interaction Heating Facility at NASA Ames Research Center. Results were gathered to characterize the new radiative and combined heating capabilities as well as the convective heating resulting from the new IHF nozzle that was required for combined heating operations. Tests were ultimately conducted at several combinations of radiative and convective heating prompted by the need to understand the effect of combined heating on the Orion heatshield material prior to pursuing combined heating tests of the more complex block architecture.

Description: No abstract available

Description: No abstract available

Description: Entry, descent, and landing (EDL) has been identified as a core area of investment in NASA's Strategic Technology Investment Plan (NASA STIP). STIP lists the space technologies needed to help achieve NASA's science, technology, and exploration goals across the agency. Within the EDL core area, deployable hypersonic decelerators, also known as deployable entry vehicles (DEVs), have been identified as an area of investment, due to its potential to revolutionize payload delivery methods to Earth and other planets. These vehicles, which can deploy their heat shields or alter their shape before entry, exploit an increased and more effective drag ratio by using less mass than traditional blunt body vehicles with rigid aeroshells. DEVs like Adaptive Deployable Entry and Placement Technology (ADEPT) and Hypersonic Inflatable Aerodynamic Decelerator (HIAD) have demonstrated the capability of transporting the equivalent science payloads of blunt body rigid aeroshells, while using a significantly smaller diameter when stowed within a launch vehicle. While DEVs' increased energy dissipation for less mass is an attractive feature, their ability to contract and expand would require advancements in the current state-of-the-art guidance and control (G&C) architectures used by traditional rigid vehicles. Pterodactyl, a project funded by NASA's Space Technology Mission Directorate (STMD), aims to provide feasible integrated G&C solutions for DEVs, complete with optimized vehicle designs and packaging analyses. Structural and aerodynamic analyses for the explored control systems suggested a need for a bank angle guidance algorithm, a heritage guidance approach that has been used in many entry precision targeting vehicles, as well as an additional need for the development of a non-bank angle guidance. For this reason, Pterodactyl will consider four different G&C configurations during its design phase: i) a reaction control system for bank (sigma) control, ii) a mass movement system for angle of attack (alpha) sideslip (beta) control, iii) flaps for alpha - beta control, and iv) flaps for sigma control. To increase the applicability of each proposed integrated G&C architecture, an 11 km/s lunar return demonstration mission is selected to stress the developed technology capability. The Lifting Nano-ADEPT (LNA) vehicle is chosen as the DEV to demonstrate the integrated solutions. This paper will detail the trajectory design for a lunar return mission, using the validated bank control guidance algorithm Fully Numerical Predictor-Corrector Entry Guidance (FNPEG) and a newly developed guidance algorithm: FNPEG Uncoupled Range Control (URC). FNPEG-URC diverges from traditional bank angle guidances by producing alpha and beta commands to thereby decouple downrange and crossrange control. This presentation will discuss the development and overall performance of FNPEG and FNPEG-URC for each of the four G&C configurations. Successful G&C configurations are defined as those that can deliver payloads to the intended descent and landing site while abiding by trajectory constraints in the face of dispersions.

Description: The Laser Interferometer Space Antenna (LISA), requires high precision displacement measurement between widely spaced pairs of freely floating test masses. We describe a proposed design for the optical telescopes that form an essential part of the laser heterodyne interferometry measurement system and discuss how the design and implementation will address the unique challenges of this specialized application.

Description: On September 12th 2018, a sounding rocket flight test was conducted on a mechanically-deployed atmospheric entry system known as the Adaptable Deployable Entry and Placement Technology (ADEPT). The purpose of the Sounding Rocket One (SR-1) test was to gather critical flight data for evaluating the vehicle's in-space deployment performance and supersonic stability. This flight test was a major milestone in a technology development campaign for ADEPT: the application of ADEPT for small secondary payloads. The test was conducted above White Sands Missile Range (WSMR), New Mexico on a SpaceLoft XL rocket manufactured by UP Aerospace. This paper describes the system components, test execution, and test conclusions.

Description: The Large Ultraviolet/Optical/Infrared (LUVOIR) Surveyor is one of four large strategic mission concept studies commissioned by NASA for the 2020 Decadal Survey in Astronomy and Astrophysics. Slated for launch to the second Lagrange point (L2) in the mid-to-late 2030s, LUVOIR seeks to directly image habitable exoplanets around sun-like stars, characterize their atmospheric and surface composition, and search for biosignatures, as well as study a large array of astrophysics goals including galaxy formation and evolution. Two observatory architectures are currently being considered which bound the trade-off between cost, risk, and scientific return: a 15-meter diameter segmented aperture primary mirror in a three-mirror anastigmat configuration, and an 8-meter diameter unobscured segmented aperture design. To achieve its science objectives, both architectures require milli-Kelvin level thermal stability over the optics, structural components, and interfaces to attain picometer wavefront RMS stability. A 270 Kelvin operational temperature was chosen to balance the ability to perform science in the near-infrared band and the desire to maintain the structure at a temperature with favorable material properties and lower contamination accumulation. This paper will focus on the system-level thermal designs of both LUVOIR observatory architectures. It will detail the various thermal control methods used in each of the major components - the optical telescope assembly, the spacecraft bus, the sunshade, and the suite of accompanying instruments - as well as provide a comprehensive overview of the analysis and justification for each design decision. It will additionally discuss any critical thermal challenges faced by the engineering team should either architecture be prioritized by the Astro2020 Decadal Survey process to proceed as the next large strategic mission for development.

Description: Planetary entry vehicles employ ablative TPS materials to shield the aeroshell from entry aeroheating environments. To ensure mission success, it must be demonstrated that the heatshield system, including local features such as seams, does not fail at conditions that are suitably margined beyond those expected in flight. Furthermore, its thermal response must be predictable, with acceptable fidelity, by computational tools used in heatshield design. Mission assurance is accomplished through a combination of ground testing and material response modelling. A material's robustness to failure is verified through arcjet testing while its thermal response is predicted by analytical tools that are verified against experimental data. Due to limitations in flight-like ground testing capability and lack of validated high-fidelity computational models, qualification of heatshield materials is often achieved by piecing together evidence from multiple ground tests and analytical simulations, none of which fully bound the flight conditions and vehicle configuration. Extreme heating environments (〉2000 W/cm2 heat flux and 〉2 atm pressure), experienced during entries at Venus, Saturn and Ice Giants, further stretch the current testing and modelling capabilities for applicable TPS materials. Fully-dense Carbon Phenolic was the material of choice for these applications; however, since heritage raw materials are no longer available, future uses of re-created Carbon Phenolic will require re-qualification. To address this sustainability challenge, NASA is developing a new dual-layer material based on 3D weaving technology called Heatshield for Extreme Entry Environments (HEEET) [1]. Regardless of TPS material, extreme environments pose additional certification challenges beyond what has been typical in recent NASA missions.Scope of this presentation: This presentation will give an overview of challenges faced in verifying TPS performance at extreme heating conditions.

Description: This is a lightning talk at the inaugural SNOW meeting. The objective is to solicit input and feedback on white papers for the upcoming decadal survey.

Description: The capability of future X-ray telescopes depends on the quality of their Point Spread Function (PSF) and the size of their field of view. Traditional designs, such as Wolter, and Wolter-Schwarzschild telescopes are stigmatic on the optical axis but their PSF degrades rapidly off-axis. At the optimal focal surface, their PSFs can be significantly improved. We present a simple optimization process for Wolter (W), Wolter-Schwarzschild (WS) and Hyperboloid-Hyperboloid (HH) telescopes that substantially improves the off-axis PSF for either narrow or wide field of view applications. In this paper, we will compare the optical performance of conventional and optimized W-, WS-, and HH-telescopes for a wide range of telescope diameters that can be used to build up future x-ray telescopes.

Description: Orbit insertion operations that require large V maneuvers using conventional propulsive technologies are mass inefficient and challenging to package within SmallSat form factors such as the popular CubeSat. Aeroassist technologies offer an alternative approach for V maneuvers and could revolutionize the use of SmallSats for exploration missions and increase the science return while reducing costs for orbital or entry missions to Mars, Venus and return to Earth. Aeroassist refers to the use of an atmosphere to accomplish a transportation system function using techniques such as aerobraking, aerocapture, aeroentry, and aerogravity assist. Aeroassist technologies are power efficient and tolerant to the radiation and thermal environment encountered in deep space, and can be integrated around or within SmallSat geometries. This presentation will discuss various Aeroassist technologies including conventional rigid aeroshells, inflatable decelerators, mechanically deployable decelerators and other drag devices and control methods that should be considered by Small Satellite mission design teams.

Description: This presentation is an overview of Heatshield for Extreme Entry Environment Technology (HEEET) providing the motivation, implementation (2014-2019), documentation, final assessment, and mission infusion.

Description: Small launch vehicles are governed by the same physics as large launch vehicles of course, but due to their small size, some aspects and sensitivities become more important and others less. This paper shows semi-empirical correlations to quantify dry mass fraction for both stage and whole vehicle optimization: mass fraction due to density, mass fraction due to thrust-to-weight, and mass fraction due to size reduction. For single-stage optimizations, a stage performance requirement can be met by a locus of mass fraction vs. specific impulse. Based on the above correlations, this alone can recommend a solid or liquid rocket for a stage. Rocket designs of similar technology levels are compared, focusing on where stages become less mass-efficient as they get smaller. The Mars Ascent Vehicle is shown to exemplify a trade between a two-stage solids vehicle and a one- or two-stage liquids vehicle.

Description: Small launch vehicles are governed by the same physics as large launch vehicles of course, but due to their small size, some aspects and sensitivities become more important and others less. This paper shows semi-empirical correlations to quantify dry mass fraction for both stage and whole vehicle optimization: mass fraction due to density, mass fraction due to thrust-to-weight, and mass fraction due to size reduction. For single-stage optimizations, a stage performance requirement can be met by a locus of mass fraction vs. specific impulse. Based on the above correlations, this alone can recommend a solid or liquid rocket for a stage. Rocket designs of similar technology levels are compared, focusing on where stages become less mass-efficient as they get smaller. The Mars Ascent Vehicle is shown to exemplify a trade between a two-stage solids vehicle and a one- or two-stage liquids vehicle.

Description: The Bi-sat Observations of the Lunar Atmosphere above Swirls (BOLAS) is a NASA planetary CubeSat mission concept in low lunar orbit. The BOLAS lower CubeSat is at a 90 km altitude above the lunar surface during spiraling down from the Evolved Expendable Launch Vehicle (EELV) Secondary Payload Adapter (ESPA) to the Moon. Without phase change material (PCM), the worst hot case temperature prediction for the Command and Data Handling (C&DH) exceeds the 61C maximum operating limit, and those for the Iris solid state power amplifier (SSPA) and transponder exceed the 50C maximum operating limit. Miniature n-Tricosane PCM packs on the Iris SSPA and transponder, and miniature n-Hexacosane PCM packs on the C&DH are used to store thermal energy in sunlight and release it in the eclipse. With paraffin PCM, all the temperatures are within the maximum operating limits.

Description: Microporous black polytetrafluoroethylene (PTFE) flexible thin sheets are successfully flown as solar diffusers on NASA's Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) spacecraft. They serve as multilayer insulation (MLI) blanket outer covers for the arm of the Touch And Go Sample Acquisition Mechanism (TAGSAM), the sunshade of the OSIRIS-REx Camera Suite (OCAMS) PolyCam imager, and the motor riser of the OCAMS SamCam imager. Additionally, microporous white PTFE flexible thin sheets are successfully flown as a MLI blanket outer cover with a low ratio of absorptance to emittance for the Regolith X-ray Imaging Spectrometer (REXIS). For ground testing, microporous black and white PTFE flexible thin sheets were successfully used as optical targets of the Touch And Go Camera System (TAGCAMS) NavCam imagers in the flight system thermal vacuum test.

Description: This course will cover an overview of the Entry Systems and Technology Division (TS) at NASA Ames Research Center (ARC) and descriptions of the extensive arc jet testing complex managed within the branch. After a quick look at the Earth and Planetary Entry projects supported by TS, along with the inventions and software developed within the division, a description of the entry environments to which thermal protection systems (TPS) are exposed will be discussed. The question of "How do we insure TPS survival?" will be answered with descriptions of the various test facilities across the agency and beyond and their applicability. The Ames Arc Jet Complex will then be described, starting with how an arc heater works, adding in the associated infrastructure required to run an arc heater, and the capabilities of each of the test tunnels. Finally, examples of TPS test articles will round out the course.

Description: No abstract available

Description: A fast-tracked multifaceted approach that integrated NASA, industry, and academia was successfully executed to advance the novel concept of radiation pressure by means of a thin diffractive film. This pioneering new approach to light sailing was found to offer advantages over reflective sails - especially for missions that include close orbits or a close fly-by of the sun.The research effort included experiments, numerical modeling, and an "incubator meeting" that brought together over 35 researchers and stakeholders to uncover some of the most feasible means of advancing both the TRL and mission capabilities of diffractive sailcraft. One of the outcomes of the incubator meeting was to focus this Phase I research on a solar polar orbiter mission for heliophysics experiments. NASA decadal surveys and other reports have repeatedly pointed out that scientists have only a paucity of information about the sun beyond the ecliptic plane. The TRL has been advanced from 1 to 3 during this Phase I research with the help of experiments that have verified the predicted force and mechanical control afforded by diffractive sails. Knowledge gained from the experiments and numerical models was not only disseminated in peer reviewed publications and conferences, but it also resulted in a patent disclosure.

Description: NASA PROGRAMMATIC CHALLENGE: Locate hidden water ice in the darkest, coldest places on the moon using dozens of simple, autonomous robots. CONCEPTUAL SOLUTION: Use multiple small, autonomous bots to search for hidden water ice in permanently shadowed regions of the surface of the moon. Bots will locate and tag hidden water ice for follow up missions.Technical Basis for proposed solution: use of emerging and maturing technologies - MEMS, Cubesats, Sensor nets, integrated devices will minimize cost risk and maximize return. Benefits: Cricket will enable human exploration through in-situ resource utilization: Cricket will demonstrate a distributed constellation to achieve a key NASA goal of novel uses of commercially available technologies. Cricket will reignite public interest in lunar exploration through a sustained human, and robotic, presence on the moon. Technical Approach: The cricket constellation has three members: the "queen"; the "hive" and the "cricket" foragers. The queen transports the hive an its crickets to the moon. The hive lands on the surface and disperses the crickets (there may be more than one species of cricket). The crickets then use the hive as a communications and recharging hub. Each cricket hosts algorithms that allow it to explore its surroundings and monitor its power state - something like a lunar Roomba - and return for recharging. If they are lost due to power or surface condition problems, replacements can carry out the hive tasks. The two most successful types of bio-inspired algorithms (BIAs) are evolutionary algorithms and swarm-based algorithms which are inspired by the natural evolution and collective behavior in animals.The evolution of the idea is summarized in Table 1 and Figure 1. NIAC context: This system integrates key elements from other NIAC efforts; it uses them and extends them into a meaningful whole

Description: X-ray observations are indispensable for understanding the cosmos. Their power is immense because much of the baryonic matter and the sites for the most active energy releases in the Universe are primarily observable in X-rays. For the 2030s and beyond, an X-ray observatory with power matching the capabilities in other wavebands is a necessary discovery engine for full exploration of the Universe. JWST and other upcoming major space- and ground-based facilities are expected to greatly expand science frontiers in the coming decades. is presents both a great opportunity and a challenge for a next-generation X-ray observatory. In many areas, such as tracing black holes during the CosmicDawn and understanding the formation and evolution of galaxies, an X-ray observatory is the logical next step. e challenge is that the X-ray science at these new frontiers requires expansion of capabilities by orders of magnitude beyond the current state of the art or anything already planned. Until recently, such gains were not technologically possible. is has changed thanks to recent breakthroughs and sustained maturation of key technologies for X-ray mirrors and detectors. We are reaping the fruits of U.S. investments in these areas over the past 1015 years. An X-ray observatory that can extend the science frontiers of the post-JWST era is now entirely feasible. Lynx is the mission concept that realizes this vision. It will y revolutionary optics and instrumentation onboard a simple, proven spacecraft. In all aspects, Lynx will be a next-generation Great Observatory that is certain to make a profound impact across the astrophysical landscape. It will provide the depth and breadth to answer the fundamental questions that confront us today; just as importantly, it will have capabilities to address questions we have yet to even ask.

Description: Toughened Unipiece Fibrous Reinforced Oxidation-resistant Composite (TUFROC) is a tiled Thermal Protection System (TPS) suitable for reusable entry heating at 2900+ F and with single use potential up to at least 3600 F. TUFROC was initially developed for NASA's X-37 project and ultimately resulted in use on the Air Force X-37B as the wing leading edge (WLE) of the vehicle. TUFROC has similar high temperature capability compared with carbon/carbon, but is manufactured at an order of magnitude lower cost & faster schedule.

Description: The Origins Space Telescope will trace the history of our origins from the time dust and heavy elements permanently altered the cosmic landscape to present-day life. How did galaxies evolve from the earliest galactic systems to those found in the universe today? How do habitable planets form? How common are life-bearing worlds? To answer these alluring questions, Origins will operate at mid- and far-infrared wavelengths and offer powerful spectroscopic instruments and sensitivity three orders of magnitude better than that of Herschel, the largest telescope flown in space to date. After a 3 year study, the Origins Science and Technology Definition Team will recommend to the Decadal Survey a concept for Origins with a 5.9-m diameter telescope cryo cooled to 4.5 K and equipped with three scientific instruments. A mid-infrared instrument (MISC-T) will measure the spectra of transiting exoplanets in the 2.8 20 m wavelength range and offer unprecedented sensitivity, enabling definitive biosignature detections. The Far-IR Imager Polarimeter (FIP) will be able to survey thousands of square degrees with broadband imaging at 50 and 250 m. The Origins Survey Spectrometer (OSS) will cover wavelengths from 25 588 m, make wide-area and deep spectroscopic surveys with spectral resolving power R ~ 300, and pointed observations at R ~ 40,000 and 300,000 with selectable instrument modes. Origins was designed to minimize complexity. The telescope has a Spitzer-like architecture and requires very few deployments after launch. The cryo-thermal system design leverages JWST technology and experience. A combination of current-state-of-the-art cryocoolers and next-generation detector technology will enable Origins natural background limited sensitivity.

Description: The Steam Propelled Autonomous Retrieval Robot (SPARROW) for Ocean Worlds was a Phase I mission concept study funded under the NASA NIAC program. This report represents the findings of that study and recommendations for future work. SPARROW, envisioned as a soccer ball-sized payload to a primary lander mission, is a propulsively hopping robot for the exploration of Europa's rugged, icy surface. A multi-thruster, passively gimballed robot within a protective, spherical shell, SPARROW is able to freely rotate, self-right, and tumble over chaotic terrains. Europa's abundant surface ice would be harvested as an in situ propellant source. The principal objective of SPARROW is to increase the science return of a Europa landed asset by enabling access to distal, spatially distributed geologic units. The design of mobility systems for Europa is challenging, due in part to its almost entirely unconstrained surface topography and strength. Images returned by Voyager and Galileo yielded resolutions on the order of hundreds of meters per pixel, with localized regions reaching 6 meters per pixelstill far larger than a typical rover. A key benefit of SPARROW's hopping, impact-tolerant design, is that it eliminates the need for a priori information regarding terrain topography and surface strength; no surface reaction forces are required for motion. In this context, SPARROW is believed to be entirely terrain agnostic. In this report we detail the results of three study objectives: i) to quantify the energy required to collect surface ice, change its phase, and maintain propellant temperature, ii) to identify control and estimation strategies that enable SPARROW to successfully reach, and return from, regions of scientific interest, and iii) to characterize the impact of SPARROW's range on likely science return. Five water-based propellant architectures are presented alongside their mass, power, and volume requirements. Monte Carlo simulations of SPARROW hopping and tumbling over 1 km of glacial ice are summarized, characterizing SPARROW's sensitivity to uncertainty in: initial pose, thrust profile, and vehicle-terrain interaction. A science traceability matrix is presented, which details the effect of sortie range on three science goals: constraining Europa's evolutionary morphology, assessing sub-surface ocean habitability, and searching for life and/or biosignatures.

Description: The Gateway Program (GW) System Requirements Document (SRD) is approved for the public domain to support NASA's Lunar Gateway Program. The main intent of these documents is to define top level functional and performance requirements for the systems that facilitate cooperative deep space exploration endeavors and execute lunar missions. The SRD defines NASA requirements for the procurement and development of the GW mission. The Gateway Program is a collaboration of US government, international partners and commercial providers. The Gateway SRD are expected to be used by all parties in development of the Gateway Program elements. For effective development and integration of the Gateway vehicle, all involved entities must use, and have awareness of, these high level program requirements to flow down to their respective developmental responsibilities so all Gateway elements will be operable as an entity. The Gateway SRD represents the requirements that are necessary for the Gateway mission. NASA has determined there is benefit to U.S. and foreign spacecraft developers to approve this information for the public domain because all the parties/participants need a common understanding of the requirements and the parameters under which they operate (size, shape, form fit and function). This will allow systems built by various nations and commercial entities to attach and function together properly and safely in the hostile environment of space.The Gateway SRD provides information regarding the current requirements for Gateway elements. Specifically, the Gateway SRD provide an overview of expected features and capabilities and requirements for safe integration of elements within the Gateway program. The SRD contains top-level functional and performance descriptions of the Gateway and definition of the interfaces limited to the scope necessary for integration purposes between Gateway elements. The documents do NOT contain detailed design information or any specifics of hardware or software implementation. The data approved for release does not include: manufacturing drawings, detailed interface control and design data, software code, detailed CAD models, structural or thermal models of the system, avionics or avionics box, board, or cable manufacturing information.

Description: In this paper, we investigate the static stability of a deployable entry vehicle called the Lifting Nano-ADEPT and design a control system to follow bank angle, angle-of-attack, and sideslip guidance commands. The control design, based on linear quadratic regulator optimal techniques, utilizes aerodynamic control surfaces to track angle-of-attack, sideslip angle, and bank angle commands. We demonstrate, using a nonlinear simulation environment, that the controller is able to accurately track step commands that may come from a guidance algorithm.

Description: Maintaining the cabin atmospheres pressure, composition, and quality within specified parameters is a necessity for successful crewed space exploration missions. A properly maintained environment minimizes health impacts on the occupants and maximizes their comfort. The challenge is to accomplish this outcome economically. The insight gained during the International Space Stations (ISS) operational lifetime is driving toward more challenging cabin atmospheric quality standards for future exploration missions. At the same time, the metabolic loads are increasing to accommodate a broader crew body size range and more rigorous exercise protocols to mitigate health effects associated with long duration microgravity exposure. Compounding this situation is new process equipment for handling trash and waste that may vent contaminants into the cabin. The limits placed on the cabin atmospheric quality parameters combined with the contaminant load define the design space for the atmosphere revitalization (AR) subsystem technologies to be deployed aboard the spacecraft. The impacts of changes to cabin atmospheric quality standards and contamination loads are evaluated and implications to future crewed exploration missions are explored.

Description: The purpose of this document is to provide a forecast of major meteor shower activity in low Earth orbit (LEO). Typical activity levels are expected for nearly all showers in 2020; only the Geminids, which are gradually increasing in strength over time, are expected to be stronger than in previous years. No meteor storms or outbursts are predicted for 2020.

Description: Due to the high number of systems in a space mission architecture and to their complex interactions, identifying risk and critical operational dependencies is not obvious. Traditional systems engineering methodology and risk assessment does not capture the impact of interactions between systems nor the cascading effects of disruptions. Based on these considerations, the Systems Operational Dependency Analysis methodology was developed for use by systems analysts and decision makers. This methodology utilizes a parametric model of interdependencies between systems to quantify the direct and indirect impact of system disruptions on other systems, as well as identify root causes. The results are effective at providing decision support for prioritizing technology investment based on risk reduction associated with potential system disruptions. Expanding on research presented at IAC 2018 and based on a collaboration with NASA Marshall Space Flight Center, this paper applies the Systems Operational Dependency Analysis methodology to NASA Lunar Gateway in collaboration with NASAs lunar exploration plans. The paper presents a hierarchical representation of the interdependencies between a Gateway habitats systems and subsystems, demonstrates quantification of the impact of disruption, and assesses the criticality of the constituent systems and subsystems.

Description: On September 12th 2018, a sounding rocket flight test was conducted on a mechanically-deployed atmospheric entry system known as the Adaptable Deployable Entry and Placement Technology (ADEPT). The purpose of the Sounding Rocket One (SR-1) test was to gather critical flight data for evaluating the vehicle's in-space deployment performance and supersonic stability. This flight test was a major milestone in a technology development campaign for Nano-ADEPT: the application of ADEPT for small secondary payloads. The test was conducted above White Sands Missile Range, New Mexico on a SpaceLoft XL rocket manufactured by UP Aerospace. This paper describes the system components, hardware development campaign, test execution, and test conclusions.

Description: No abstract available

Description: Apollo was designed to carry astronauts safely back from the Moon at return speeds exceeding 11 km/s and requireddevelopment of a new ablative thermal protection system (TPS) to protect the capsule from entry heating. Mercuryand Gemini, that preceded Apollo, were focused on Earth orbiting system demonstration and lessons learned fromthem were used in Apollo. The ablative material and associated system development for Lunar return conditionsrequired considerable ground and flight testing. Mars Viking Lander missions required a new lighter weight ablatoras entry heating was benign compared to Apollo. Pioneer-Venus and Galileo Probe missions required a new and morecapable ablator than Apollo. After two decades, Mars Pathfinder followed by Mars Exploration Rover missions,smaller than Viking but more demanding, were able to use Viking ablative TPS. At the same time, advances in manufacturing and materials technology led to development of innovative lightweight ablators. These new ablators enabled Stardust and Genesis Sample Return Missions. Around the turn of this century, NASA decided on a scaled-upversion of the Apollo capsule for human exploration of Moon and Mars and the ablative heat shield to protect the CrewExploration Vehicle ended up being the Apollo ablative TPS. The Artemis 1 mission is currently fitted with tiledsystem, different than Orion EFT-1 but with the Apollo ablative material as a result of lessons learned. NASA iscurrently planning on sample return missions from Mars, and this will require robust ablative TPS that can providehigher reliability than any other past mission. There are still unexplored high scientific value destinations in the solarsystem. In situ exploration of Uranus, Neptune, Saturn and sample return missions with return speed much higher thanStardust will require ablators capable of withstanding extreme entry that are also efficient. New ablative TPS havebeen developed in anticipation of these future missions. This paper is intended to tell the story of these ablators,illustrated through examples. We see the use of flight proven ablators was sometimes a risky proposition and newablators perceived to be higher risk have proved otherwise. The history of ablators illustrates the challenges eachmission had to address, either through the use of flight proven or new ablative TPS, to be successful.

Description: The Orbital Debris Program Office at NASA Johnson Space Center has a long history of an optical observational program. The Meter Class Autonomous Telescope, MCAT, was dedicated to Eugene Stansbery (now also known as ES-MCAT) in 2017. MCAT, a 1.3m DFM telescope, has a proven capability for tracking known objects from Low-Earth Orbits (LEO) out to Geosynchronous (GEO) orbits. Monitoring the population of the GEO belt is accomplished through surveys. A GEO survey statistically samples the GEO belt (0 to ~15 deg orbital inclinations) to detect both correlated and uncorrelated targets. A GEO survey, the initial focus for MCAT, will commence in 2019 to map out the current state of the GEO population as input for the ORbital Debris Engineering Model (ORDEM 4.x). If a break-up occurs, surveys of the break-up field can be followed for discovery and investigations of daughter debris fragments from the parent satellite. Discovery can be accomplished by surveying orbits near to and including the parent objects orbit. Targeted observations of debris can be taken with a suite of broadband filters for characterizing individual objects by rate-tracking their known or calculated orbital elements (Two-Line Element sets, TLEs). These observations can be used in conjunction with NASAs Standard Satellite Break-up Model (SSBM). In 2018, MCATs primary mirror was realuminized with a high-end protected, enhanced silver ZeCoat and the CCD chip was replaced in the Spectral Instruments camera. With these updates completed, MCAT is now well on track to reach Full Operational Capability (FOC) in 2019 for its survey and rate-track capabilities. A full overview of MCATs operational state, capabilities, and mission will be discussed.

Description: When Apollo was designed to carry astronauts safely back from the Moon, at return speeds exceeding 11 km/s, it required development of a new lightweight ablative material to protect the capsule and crew from the intense heat of entry. Soon after the Apollo program, successful Mars Viking Lander missions employed a different and much lighter ablator in more benign entry conditions. On the other hand, the Pioneer-Venus and Galileo Probe missions that followed required yet another ablative system, to manage the extreme heating at those destinations, which was like flying a ballistic missile nose tip into a thermonuclear explosion. NASA had to invent a new heat-shield concept based on the rocket nozzle and ballistic missile ablative materials. In the mid 1990's, as the Science focus returned to Mars, advances in manufacturing, testing and materials technology led to innovative lightweight ablators that enabled comet and asteroid sample return missions and facilitated large lander missions such as MSL and Mars 2020. NASA's current plans for robotic and human exploration of the Moon, Mars and beyond introduce different constraints and new expectations for ablators. Human missions to Moon and Mars, sample return missions from Mars, and exploration of Uranus and Neptune, the two planets we are yet to explore, will require ablators that can withstand extreme environments, with verifiable robustness, and with raw materials and manufacturing approaches that are sustainable in the longer term. This talk will review the history of ablators as well as current ablative TPS development that addresses the requirements for future missions to Moon, Mars and beyond.

Description: The upcoming Lunar IceCube (LIC) mission will deliver a 6U CubeSat to a low lunar orbit via a ride-share opportunity during NASAs Artemis 1 mission. This presents a challenging trajectory design scenario, as the vast change in energy required to transfer from the initial deployment state to the destination orbit is compounded by the limitations of the LICs low-thrust engine. This investigation addresses these challenges by developing a trajectory design framework that utilizes dynamical structures available in the Bicircular Restricted Four-Body Problem (BCR4BP) along with a robust direct collocation algorithm. Maps are created that expedite the selection of invariant manifold paths from a periodic staging orbit in the BCR4BP that offer favorable connections between the LIC transfer phases. Initial guesses assembled from these maps are passed to a direct collocation algorithm that corrects them in the BCR4BP while including the variable low-thrust acceleration of the spacecraft engine. Results indicate that the ordered motion provided by the BCR4BP and the robustness of direct collocation combine to offer an efficient and adaptable framework for designing a baseline trajectory for the LIC mission.

Description: The upcoming Lunar IceCube (LIC) mission will deliver a 6U CubeSat to a low lunar orbit via a ride-share opportunity during NASAs Artemis 1 mission. This presents a challenging trajectory design scenario, as the vast change in energy required to transfer from the initial deployment state to the destination orbit is compounded by the limitations of the LICs low-thrust engine. This investigation addresses these challenges by developing a trajectory design framework that utilizes dynamical structures available in the Bicircular Restricted Four-Body Problem (BCR4BP) along with a robust direct collocation algorithm. Maps are created that expedite the selection of invariant manifold paths from a periodic staging orbit in the BCR4BP that offer favorable connections between the LIC transfer phases. Initial guesses assembled from these maps are passed to a direct collocation algorithm that corrects them in the BCR4BP while including the variable low-thrust acceleration of the spacecraft engine. Results indicate that the ordered motion provided by the BCR4BP and the robustness of direct collocation combine to offer an efficient and adaptable framework for designing a baseline trajectory for the LIC mission.

Description: Analytic expressions for spacecraft attitude and rate estimation performance of an attitude estimation filter in terms of sensor specifications are useful tools for spacecraft design. Farrenkopf (1978) famously found analytic expressions for steady-state pre-update and post-update attitude and gyro bias estimate error variances for an attitude estimation filter for a single-axis spacecraft with a Rate Output Gyro (ROG). Markley and Reynolds (2000) extended the analysis for a Rate-Integrating Gyro (RIG) with angle white noise. These expressions allow for the rapid evaluation of system performance during preliminary mission design phases. One contribution of this paper is the analytic calculation of the steady-state pre-update and post-update angular rate estimate uncertainty for both the ROG and RIG cases. The primary contribution of this paper is the extension of the results for both the ROG and the RIG cases to the situation of an attitude sensor outage. This situation arises frequently in practice; for example when a star sensors field of view is occluded, when a star sensors readings are unreliable during a thruster burn that vibrates the spacecraft, or during star sensor outages due to radiation upsets. Analytic expressions for the attitude estimate uncertainty, gyro bias estimate uncertainty, and angular rate estimate uncertainty are given in terms of the attitude sensor outage interval, the star tracker measurement noise, and gyro noise parameters. Validity of the analytic results is demonstrated via Monte Carlo simulation.

Description: Missions to the surface of Venus have had limitedlife due to the extreme environmental conditions. Theshort life has limited the science that is achievable,and there are gaps in some science, such asseismology, which is enabled by long life. This worksummarizes technical advances that are preparing usfor long-duration (weeks to months) Venus surfacemissions.

Description: On October 2016, a capsule known as Schiaparelli, part of the European Space Agency (ESA) ExoMars mission, entered the Martian atmosphere. Measurements taken during the Schiaparelli descent will be used to validate computational models used to design the thermal protection system (TPS) of future Mars missions. One of the unique features of Schiaparelli entry was the possibility of a major dust storm occurring during the entry. Major dust storms are unpredictable but more likely during the Northern Autumn timeframe. In 2001, for example, regional dust storms merged into a global dust storm that blanketed much of the planet. Even though Schiaparelli did not enter during a major dust storm, future Mars missions will have to account for the possibility of dust erosion (depending on the time of year) when estimating the thickness of the TPS. Because weight is always a critical factor in designing entry vehicles, accurate assessment of dust erosion is necessary to avoid over-design of the TPS. This study will present computational results of heatshield erosion due to dust particle impacts on the Schiaparelli capsule if it had encountered a dust storm during entry.

Description: No abstract available

Description: No abstract available

Description: A solid propulsion system design is being considered for a conceptual Mars Ascent Vehicle (MAV) as part of a potential robotic Mars Sample Return campaign. A Preliminary Architecture Assessment for a MAV is being conducted at Marshall Space Flight Center. Experts from all relevant areas are involved in a rapid design and analysis cycle to define a MAV vehicle utilizing solid propulsion. The design presented here is the solid motor propulsion concept result of the study. Whereas solid motors have been used on Mars missions in the past during descent, none have been required to reside on the surface for a period of time prior to functioning. This difference will expose the MAV to relatively extreme temperatures. Other challenges exist in designing a solid propulsion system for MAV including performance interactions with other vehicle inert masses and minimizing orbit dispersions. These considerations were examined and a preliminary CAD model of the motors was created. Along with additional pertinent inputs from other disciplines, a solid propulsion vehicle concept for the MAV is described.

Description: The Near Earth Asteroid Scout flight mission is set to launch on the maiden voyage of the Space Launch System as a secondary payload. The spacecraft will be jettisoned in cis-lunar space and embark on an ambitious 2.5 year mission to image an asteroid. The spacecraft is uniquely equipped with an 85m2 solar sail as the main propulsion system. The monolithic sail system is designed to package within a 6U volume for launch and then deploy during flight. The NEA Scout team has presented in the past to the International Symposium on Solar Sailing topics related to the engineering development unit and design efforts to achieve flight hardware build. This paper will focus on the lessons learned from building and testing the NEA Scout flight system. Focus will be on the mechanical, software, and electrical interfaces as well as preparation for subsystem environmental tests, including thermal vacuum. Due to the unique design of the spacecraft, the solar sail subsystem was required to be located in the center of the spacecraft. This requirement lead to design challenges such as designing and accommodating critical cable harnesses to run through the center of the sail subsystem, packaging and deployment design of the sail subsystem, and integrated testing efforts through an avionics test bed to verify and validate a complete system architecture.

Description: For spacecraft entering an atmosphere, a reduction in TPS mass is directly proportional to the increase in payload mass. The HOLLOW TPS concept is a reusable material with lower density and similar thermal capabilities to traditional tiles. Using HOLLOW TPS to replace a percentage of the tiles on a flight vehicle could save up to 35% mass depending on the mission objectives and flight path. The HOLLOW TPS will also increase an equal amount of payload capacity, increasing the efficiency of the mission.

Description: The objective of the Heatshield for Extreme Entry Environment Technology (HEEET) projects is to mature a 3-D Woven Thermal Protection System (TPS) to Technical Readiness Level (TRL) 6 to support future NASA missions to destinations such as Venus and Saturn. Destinations that have extreme entry environments with heat fluxes 〉 3500 W/cm2 and pressures up to 5 atmospheres, entry environments that NASA has not flown since Pioneer-Venus and Galileo. The scope of the project is broad and can be split into roughly four areas, Manufacturing/Integration, Structural Testing and Analysis, Thermal Testing and Analysis and Documentation. Manufacturing/Integration covers from raw materials, piece part fabrication to final integration on a 1-meter base diameter 45-degree sphere cone Engineering Test Unit (ETU). A key aspect of the project was to transfer as much of the manufacturing technology to industry in preparation to support future mission infusion. The forming, infusion and machining approaches were transferred to Fiber Materials Inc. and FMI then fabricated the piece parts from which the ETU was manufactured. The base 3D-woven material consists of a dual layer weave with a high-density outer layer to manage recession in the system and a lower density, lower thermal conductivity inner layer to manage the heat load. At the start of the project it was understood that due to weaving limitations the heat shield was going to be manufactured from a series of tiles. And it was recognized that the development of a seam solution that met the structural and thermal requirements of the system was going to be the most challenging aspect of the project. It was also recognized that the seam design would drive the final integration approach and therefore the integration of the ETU was kept in-house within NASA. A final seam concept has been successfully developed and implemented on the ETU. The structural testing and analysis covers from characterization of the different layers of the infused material as functions of weave direction and temperature to sub-component level testing such as 4pt bend testing at sub-ambient and elevated temperature and culminates in testing of the ETU results from which will validate the structural models developed using the element and sub-component level tests. Given the seam has to perform both structurally and aerothermally during entry a novel 4pt bend test fixture was developed allowing articles to be tested while the front surface is heated with a laser. These tests are being utilized to establish the systems structural capability during entry.A broad range of aerothermal tests (arcjet tests) were performed to develop material response models for predicting the required TPS thickness to meet a missions needs and to evaluate failure modes and establish the capability of the system. The final aspect of the project is to develop a comprehensive Design and Data Book such that a future mission will have the information necessary to adopt the technology. This presentation will provide an overview for each of these areas and argue that HEEET has successfully achieved TRL 6.

Description: No abstract available

Description: Over the last 5 years, the Heatshield for Extreme Entry Environment Technology (HEEET) project has been working to mature a 3-D Woven Thermal Protection System (TPS) to Technical Readiness Level (TRL) 6 to support future NASA missions to destinations with extreme entry environments such as Venus, Saturn, Uranus, Neptune and high speed sample return missions to Earth. A key aspect of the project has been the building and testing of a 1-meter base diameter Engineering Test Unit (ETU) representative of what could be used for a Saturn probe. This paper provides a high level overview of the HEEET project including manufacturing and testing of the ETU which has been subjected to mission relevant thermal and mechanical loads, to verify structural models, establish system capability and verify manufacturing workmanship.

Description: A sounding rocket flight test was conducted on a mechanically-deployed entry vehicle (DEV) known as the Adaptable Deployable Entry and Placement Technology (ADEPT). This flight test was a major milestone in a technology development campaign for ADEPT: the application of ADEPT for small secondary payloads. The test was conducted above White Sands Missile Range (WSMR), New Mexico on a SpaceLoft XL rocket on September 12, 2018. The first objective of the SR-1 flight test was to demonstrate that ADEPT could transform from a compact stowed configuration, separate from the launch vehicle, and successfully deploy exo-atmospherically into the desired low ballistic coefficient entry configuration. The second objective was to characterize the aerodynamic performance of the deployed configuration in order to evaluate the faceted blunt body geometry dynamic stability characteristics as it decelerated from supersonic to subsonic speeds.The ADEPT DEV had several sensors on-board and also leveraged third-party data sources for post-flight analysis and trajectory reconstruction. Based upon data review, the launch vehicle met exo-atmospheric delivery performance requirements of spin rate, no re-contact, separation velocity, and delivery altitude. The unique ADEPT forebody geometry (blunted octagonal pyramid, 0.7 m diameter at the rib tips) and aftbody configuration has never flown before. The forebody half cone angle at the ribs is 70 deg, while the half cone angle mid gore is 68.5 deg. The aftbody, where the 3U CubeSat 'payload' resides is a rectangular prism that extends ~ the minimum forebody diameter behind the nose. Understanding DEV blunt body dynamic stability performance is critical for determining how they can be employed for atmospheric entry, descent and landing.The primary data products were used to perform flight mechanics analysis and reconstruct the as-flown trajectory. On-board video recovered post-flight demonstrated that the DEV achieved and maintained the desired entry configuration. Post-flight analyses showed that the vehicle met the threshold of achieving stable flight below Mach = 0.8. The ADEPT project has focused on ballistic, axisymmetric shapes as the logical 'first step' in mission infusion applications. With the current maturation and development of the ballistic (non-lifting) 1 m class ADEPT, the next step in ADEPT maturation is the focus on configurations that are capable of generating lift in order to accomplish aerocapture and precision landing mission capabilities. ADEPT is particularly attractive for evaluating various guidance and control approaches as the deployable structure enables attachment points for various actuation methods such as control surfaces, moving mass elements, or RCS thrusters. The ADEPT sounding rocket flight test provided a low-cost means of achieving significant system level maturity for the 1 m class ADEPT configuration. A description of the technology, system components, flight test execution, and conclusions will be described.

Description: This paper describes recent development of modeling and simulation technologies for entry systems and their infusion into NASA's exploration missions. Technology development is organized and prioritized using a system-level perspective, resulting in four broad technical areas of investment: (1) Thermal protection material modeling, (2) Shock layer kinetics and radiation, (3) Computational and experimental aerosciences, and (4) Guidance, navigation, and control. The paper will highlight key contributions from each of these areas, their impacts from a spacecraft and mission design perspective, and discuss planned future investment. Aspects of each technical area are only briefly summarized here. Thermal protection material modeling is geared toward high-fidelity, predictive models capable of optimizing design performance, post-flight reconstruction, and quantifying thermal protection system reliability. New computational tools and experimental techniques have been applied to Orion, MSL/Mars 2020, Mars InSight, and Mars Sample Return missions. Research and development in the area of shock layer kinetics has focused on air and CO2-based atmospheres. In both cases, substantial improvements in model uncertainty have directly impacted the development of mission margin policies, flight instrumentation design and analysis (Orion and Mars 2020), and have even revealed the importance of neglected phenomena like mid-wave infrared radiation of CO2. Aerosciences is a very broad area of interest in entry systems, yet a number of important challenges are being addressed: Coupled fluid-structure simulations of parachute inflation and dynamics affecting Orion, Commercial Crew, and Mars programs; Experimental and computational studies of vehicle dynamics; Multi-phase flow with dust particles to simulate augmentation of aerothermal environments at Mars during dust storms; and studies of roughness-induced heating augmentation relevant to tiled (Orion, Mars 2020) and woven (Mars Sample Return) thermal protection systems. Guidance and control in the context of entry systems has focused on development of methods for multi-axis control (i.e. pitch and yaw, rather than bank angle alone) of spacecraft during entry and descent, with precision landing requirements driven by Mars human exploration goals.

Description: The objective of the Heatshield for Extreme Entry Environment Technology (HEEET) projects is to mature a 3-D Woven Thermal Protection System (TPS) to Technical Readiness Level (TRL) 6 to support future NASA missions to destinations such as Venus and Saturn. Destinations that have extreme entry environments with heat fluxes 〉 3500 W/sq cm and pressures up to 5 atmospheres, entry environments that NASA has not flown since Pioneer-Venus and Galileo. The scope of the project is broad and can be split into roughly four areas, Manufacturing/Integration, Structural Testing and Analysis, Thermal Testing and Analysis and Documentation. Manufacturing/Integration covers from raw materials, piece part fabrication to final integration on a 1-meter base diameter 45-degree sphere cone Engineering Test Unit (ETU). A key aspect of the project was to transfer as much of the manufacturing technology to industry in preparation to support future mission infusion. The forming, infusion and machining approaches were transferred to Fiber Materials Inc. and FMI then fabricated the piece parts from which the ETU was manufactured.

Description: The development and validation of a capability to perform quantitative, physics-based analysis of alternatives of conceptual unmanned, reusable lunar cargo lander architectures is discussed. The lander is conceptualized as a suite of disciplines that need to be sized, synthesized, and optimized for a mission. As such, models of these disciplines were developed and integrated in a recently-developed multi-disciplinary analysis and optimization framework for space systems. The development of the disciplines, as well as how they are integrated into the framework, is discussed. Additionally, validation studies were performed against the Descent Module of the Altair lunar lander.

Description: No abstract available