ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • ENERGY PRODUCTION AND CONVERSION  (496)
  • FLUID MECHANICS AND HEAT TRANSFER  (362)
  • 1995-1999
  • 1980-1984  (858)
  • 1975-1979
  • 1935-1939
  • 1982  (858)
Collection
Keywords
Years
  • 1995-1999
  • 1980-1984  (858)
  • 1975-1979
  • 1935-1939
Year
  • 1
    facet.materialart.
    Unknown
    On the cause of the flat-spot phenomenon observed in silicon solar cells at low temperatures and low intensities (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A model that explains the flat-spot power loss phenomenon is presented. Evidence suggests that the effect is due to localized metallurgical interactions between the silicon substrate and the contact metallization. These reactions are shown to result in localized regions in which the P-N junction is destroyed and replaced with a metal semiconductor-like interface. The effects of thermal treatment, crystallographic orientation, junction depth, and metallization are shown along with a method of preventing the effect through the suppression of vacancy formation at the free surface of the contact metallization. Data indicating the effectiveness of a TiN diffusion barrier in preventing the effect are also given.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p 65-70
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 2
    facet.materialart.
    Unknown
    Full-coverage film cooling (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Transpiration cooling is treated and then full coverage discrete hole injection for three injection orientations. Spacings with pitch to diameter ratios of 5 and 10 are discussed. The array is staggered, with the transverse pitch and the streamwise pitch the same. Results are presented in terms of the Stanton number using the heat transfer coefficient defined in terms of the difference between the wall temperature and the free stream temperature. Two values of Stanton number are provided for each situation: one with the injectant at wall temperature, and the other with the injectant at free stream temperature. These two values are equivalent to knowing the heat transfer coefficient and the adiabatic effectiveness. The heat transfer coefficient thus defined is used with the actual wall temperature to and the actual gas temperature to calculate the heat load. The principle of superposition thus invoked is valid exactly when the governing equations are linear.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Von Karman Inst. for Fluid Dyn. Film Cooling and Turbine Blade Heat Transfer, Vol. 1; 27 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 3
    facet.materialart.
    Unknown
    NASA solar array flight experiment (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The NASA large flexible solar array space shuttle flight experiment is described. The 32 x 4 m wing is deployed from the shuttle bay, and experiments in electrical output, multiple deployment, and structural dynamics are planned. Both 2 x 4 cm and 5.9 x 5.9 cm cell assemblies on the array blanket are evaluated. Safety/hazards provisions are described, including emergency jettison provisions. Ground testing and hardware fabrication are summarized.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p 179-184
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 4
    facet.materialart.
    Unknown
    Large area low-cost space solar cell development (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A development program to produce 5.9 x 5.9 cm space quality silicon solar cells with a cost goal of 30 $/W is described. Cell types investigated include wraparound dielectric, mechanical wraparound and conventional contact configurations with combinations of 2 or 10 ohm/cm resistivity, back surface reflectors and/or fields, and diffused or ion implanted junctions. A single step process to cut cell and cover glass simultaneously is being developed. Results for cell and array tests are given. Large solar arrays that might use cells of this type are discussed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p 23-26
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 5
    facet.materialart.
    Unknown
    The swing to concentrator arrays (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Objectives and progress in both low concentration ratio (6 to 10) and high concentration ratio ( 100) array developments are summarized. Problems encountered include: thermal control, maldistribution of concentrated sunlight, current busing, and optical surface degradation. The potential advantages over planar arrays are an order of magnitude reduction in per unit cost of power plus increased immunity to radiation damage.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p xix-xxiv
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 6
    facet.materialart.
    Unknown
    Heat loss and drag of spherical drop tube samples (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Analysis techniques for three aspects of the performance of the NASA/MSFC 32 meter drop tube are considered. Heat loss through the support wire in a pendant drop sample, temperature history of a drop falling through the drop tube when the tube is filled with helium gas at various pressures, and drag and resulting g-levels experienced by a drop falling through the tube when the tube is filled with helium gas at various pressures are addressed. The developed methods apply to systems with sufficiently small Knudsen numbers for which continuum theory may be applied. Sample results are presented, using niobium drops, to indicate the magnitudes of the effects. Helium gas at one atmosphere pressure can approximately double the amount of possible undercooling but it results in an apparent gravity levels of up to 0.1 g.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: the 1981 NASA(ASEE Summer Fac. Fellowship Program; 31 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 7
    facet.materialart.
    Unknown
    Determination of optimum sunlight concentration level in space for 3-5 cascade solar cells (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Current-voltage curves were calculated for each cell in a cascade structure using a solar cell diode equation and superposition. Terms for the light generated current, diffusion current, space charge recombination current and series and shunt resistance are included. Individual current voltage curves are added in series with ohmic resistance losses for the cell interconnects to obtain the cascade cell performance. Temperature was varied with concentration, using several models, and ranged from 55 C at one Sun to between 80 and 200 C at 100 Suns. A variety of series resistance and internal resistances were used. Coefficients of the diffusion and recombination terms are strongly temperature dependent. The study indicates that maximum efficiency (30%) occurs in the 50 to 100X Sun concentration range, provided series resistance is below 0.015 ohm-sq cm and cell temperature is 80 C at 100 Suns.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p 265-270
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 8
    facet.materialart.
    Unknown
    Effects of processing and dopant on radiation damage removal in silicon solar cells (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Gallium and boron doped silicon solar cells, processed by ion implantation followed by either laser or furnace anneal were irradiated by 1 MeV electrons and their postirradiation recovery by thermal annealing was determined. During the postirradiation anneal, gallium doped cells prepared by both processes recovered more rapidly and exhibited none of the severe reverse annealing observed for similarly processed 2 ohm-cm boron doped cells. Ion implanted furnace annealed 0.1 ohm-cm boron doped cells exhibited the lowest post-irradiation annealing temperatures after irradiation. The drastically lowered recovery temperature is attributed to the reduced oxygen and carbon content of the 0.1 ohm-cm cells. Analysis based on defect properties and annealing kinetics indicates that further reduction in annealing temperature is attainable with further reduction in the silicon's carbon and/or divacancy content after irradiation.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p 89-93
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 9
    facet.materialart.
    Unknown
    Design, installation and operating experience of 20 photovoltaic medical refrigerator systems on four continents (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The NASA Lewis Research Center in cooperation with the World Health Organization, U.S.A. I.D., the Pan American Health Organization and national government agencies in some developing countries sponsored the installation of twenty photovoltaic powered medical vaccine storage refrigerator-freezer (R/F) systems. The Solar Power Corporation was selected as the contractor to perform the design, development and installation of these twenty units. Solar Power's experiences are described herein.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 10
    facet.materialart.
    Unknown
    Development of a photovoltaic module qualification test based on combined-environment accelerated stress data (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The U.S. Coast Guard has developed a qualification test to screen photovoltaic modules for utilization on marine aids to navigation. The test is based on a combined-environment of hot and cold saltwater immersion and air pressurization. The test has demonstrated a very high acceleration factor and excellent correlation of electrical failures with modules in a concurrent real-time marine exposure.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 11
    facet.materialart.
    Unknown
    Design principles for high efficiency small-grain polysilicon solar cells, with supporting experimental studies (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Design principles suggested here aim toward high conversion efficiency (greater than 15 percent) in polysilicon cells. The principles seek to decrease the liabilities of both intragranular and grain-boundary-surface defects. The advantages of a phosphorus atom concentration gradient in a thin (less than 50 microns) base of a p(+)/n(x)/n(+) drift-field solar cell, which produces favorable gradients in chemical potential, minority-carrier mobility and diffusivity, and recombination lifetime (via phosphorus gettering) are suggested. The degrading effects of grain boundaries are reduced by these three gradients and by substituting atoms (P, H, F or Li) for vacancies on the grain-boundary surface. From recent experiments comes support for the benefits of P diffusion down grain boundaries and, for quasi-grain-boundary-free and related structures. New analytic solutions for the n(x)-base include the effect of a power-law dependence between P concentration and lifetime. These provide an upper-bound estimate on the open circuit voltage. Finite-difference numerical solutions of the six Shockley equations furnish complete information about all solar-cell parameters and add insight concerning design.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 12
    facet.materialart.
    Unknown
    Residential photovoltaic power conditioning technology for grid connected applications (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Major advances in photovoltaic (PV) Power Conditioning (PC) with respect to performance and low-cost potential have been made. Solutions have been obtained to interface and control problems related to adapting available inverter designs to the grid-connected, residential photovoltaic experiments. A description is presented to contributing research and development activities. Attention is given to aspects of residential systems experience, conceptual design studies, questions of optimum topology development, and promising advanced designs for residential PV provided by development efforts of the private sector.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 13
    facet.materialart.
    Unknown
    Design solutions for the solar cell interconnect fatigue fracture problem (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Mechanical fatigue of solar cell interconnects is a major failure mechanism in photovoltaic arrays. A comprehensive approach to the reliability design of interconnects, together with extensive design data for the fatigue properties of copper interconnects, has been published. This paper extends the previous work, developing failure prediction (fatigue) data for additional interconnect material choices, including aluminum and a variety of copper-Invar and copper-steel claddings. An improved global fatigue function is used to model the probability-of-failure statistics of each material as a function of level and number of cycles of applied strain. Life-cycle economic analyses are used to evaluate the relative merits of each material choce. The copper-Invar clad composites demonstrate superior performance over pure copper. Aluminum results are disappointing.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 14
    facet.materialart.
    Unknown
    Optimal design of high-efficiency tandem cells (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Computer analysis indicates that a substantial increase in solar cell conversion efficiencies can be achieved by using two-cell, multi-bandgap tandem structures instead of single-junction cells. Practical AM1 efficiencies of about 30 percent at one sun and over 30 percent at multiple suns are to be expected. The further increases in efficiency calculated for a three-cell tandem structure are much smaller and may not justify the added complexity. For inexpensive two-cell tandem modules, Si is preferred for the bottom cell, and the top-cell material should have a bandgap of 1.75 to 1.80 eV. The GaAs-AlAs and GaAs-GaP systems are very attractive candidates for the top cell. Significant advances have been achieved in growing GaAs on Ge-coated Si substrates (for the two-terminal, two-cell structure) and in growing free-standing ultrathin GaAs layers (for the two-terminal or four-terminal structures). These advances should be transferable to the GaAs-AlAs and GaAs-GaP systems.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 15
    facet.materialart.
    Unknown
    Characterization of the electrical output of flat-plate photovoltaic arrays (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The electric output of flat-plate photovoltaic arrays changes constantly, due primarily to changes in cell temperature and irradiance level. As a result, array loads such as direct-current to alternating-current power conditioners must be able to accommodate widely varying input levels, while maintaining operation at or near the array maximum power point.The results of an extensive computer simulation study that was used to define the parameters necessary for the systematic design of array/power-conditioner interfaces are presented as normalized ratios of power-conditioner parameters to array parameters, to make the results universally applicable to a wide variety of system sizes, sites, and operating modes. The advantages of maximum power tracking and a technique for computing average annual power-conditioner efficiency are discussed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 16
    facet.materialart.
    Unknown
    Solar cell performance at low illumination and temperature for deep-space applications (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: (Previously cited in issue 12, p. 2037, Accession no. A81-29543)
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 17
    facet.materialart.
    Unknown
    Single crystal growth of upgraded metallurgical silicon by HEM for photovoltaic applications (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Commercially available metallurgical grade (MG) silicon has high B and P content which is not reduced significantly by directional solidification. By choosing high purity raw materials for an experimental Submerged Electrode Arc Furnace, most of the impurities are reduced to 10 ppmw. Directional solidification of upgraded metallurgical grade (UMG) silicon by the Heat Exchanger Method (HEM) has produced 16 cm x 16 cm cross section ingots with nearly single crystal structure. The main problem encountered during directional solidification was SiC impurities dispersed through the structure. Solar cells fabricated from UMG silicon that was directionally solidified twice by HEM have shown up to 12.33% (am1) conversion efficiency.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Silicon Ingot Casting, Phase 3 and Phase 4; 12 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 18
    facet.materialart.
    Unknown
    Origin of SiC impurities in silicon crystals grown from the melt in vacuums (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A main source of high carbon levels in silicon crystals grown from melt under reduced pressures and contained in silica crucibles supported by graphite retainer/susceptor was identified by thermodynamic analysis. The calculations were verified by experimental results and the carbon level is reduced by approximately 50% with the use of molybdenum retainers.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Crystal Systems, Inc. Silicon Ingot Casting, Phase 3 and Phase 4; 5 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 19
    facet.materialart.
    Unknown
    Silicon crystal growth in vacuum (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The most developed process for silicon crystal growth is the Czochralski (CZ) method which was in production for over two decades. In an effort to reduce cost of single crystal silicon for photovoltaic applications, a directional solidification technique, Heat Exchanger Method (HEM), was adapted. Materials used in HEM and CZ furnaces are quite similar (heaters, crucibles, insulation, etc.). To eliminate the cost of high purity argon, it was intended to use vacuum operation in HEM. Two of the major problems encountered in vacuum processing of silicon are crucible decomposition and silicon carbide formation in the melt.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Silicon Ingot Casting, Phase 3 and Phase 4; 4 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 20
    facet.materialart.
    Unknown
    Part 2: Multi-wire slicing. Fixed Abrasive Slicing Technique (FAST) (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The Fixed Abrasive Slicing Techniques (FAST) is a new slicing technique that was developed to slice ingots more effectively. It was demonstrated that 25 wafers/cm can be sliced from 10cm diameter and 19 wafers/cm from 15 cm diameter ingots. Over 99% yield (222 out of a possible 224) was demonstrated during slicing of a 10 cm diameter ingots at 25 wafers/cm. The average thickness of wafers was 0.249 mm and the kerf was 0.151 mm. Slicing rates as high as 0.14 mm/min were also demonstrated for 10 cm diameter ingots.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Silicon Ingot Casting, Phase 3 and Phase 4; 67 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 21
    facet.materialart.
    Unknown
    Silicon slicing by fixed abrasive slicing technique (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: One of the major cost factors in silicon ingot technology adaptation for terrestrial photovoltaic application is in slicing boules into wafers. The most developed industrial practice is the Internal Diameter (ID) slicing. This method utilizes diamond cutting. The diamond stands up for long periods, hence, the cost of expendable materials is low. However, the ID technology as practiced today has poor material utilization. The Multiblade Slurry (MBS) method has low equipment and labor costs but its expendable material costs are high. Recently Multiwire Slurry (MWS) technology has shown very good material utilization, but its expendable material costs are even higher than MBS. The multiwire Fixed Abrasive Slicing Technique (FAST) still in advanced development stage, combines the low expendable material costs of ID method, the low labor and equipment costs of MBS and high material utilization of MWS.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Silicon Ingot Casting, Phase 3 and Phase 4; 3 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 22
    facet.materialart.
    Unknown
    Part 1: Silicon ingot casting. Heat Exchanger Method (HEM) (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Directional solidification by the Heat Exchanger Method (HEM) is a viable approach for directional solidification of silicon ingots used for terrestrial solar cell applications. Some of the significant advances made during this phase of the program were: ingot size, 34 cm x 34 cm x 17 cm - 45 kg, usable material yield - 90%, solar cell efficiency averaged over the whole ingot - 85% of control CZ (35 kg ingot), very uniform resistivity over the boule, and cycle time for 36 kg ingots - 56 hours. Some of the problems encountered were growth rate decrease with increased ingot height, silicon carbide precipitates, and high dislocation density in HEM material. The silicon carbide is attributed to backstreaming of oil vapors from the vacuum pump; the high dislocation density is associated with the thermal history of the boule.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Silicon Ingot Casting, Phase 3 and Phase 4; 111 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 23
    facet.materialart.
    Unknown
    Turbulent boundary layer heat transfer (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Several environmental parameters presently acknowledged to affect heat transfer are discussed including: (1) the experimental apparatus used, (2) uniform and variable wall temperatures, (3) acceleration effects, (4) deceleration, (5) free stream turbulence, (6) surface roughness, (7) unsteady effects, and (8) secondary flows. Calculation procedures, and some physically based models that are successful in computing heat transfer rates are discussed.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Von Karman Inst. for Fluid Dyn. Film Cooling and Turbine Blade Heat Transfer, Vol. 1; 40 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 24
    facet.materialart.
    Unknown
    Curvature effects and turbulent boundary layers (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Results are examined from an experiment conducted to determine quantitatively the secondary factors which affect the response of a turbulent boundary layer to convex curvature and to examine the recovery process after curvature ended. The variation of Stanton number with streamwise distance and with enthalpy thickness Reynolds number for the baseline case is shown. The effect of delta sub .99/R on the velocity of the potential core would have if we extended to the wall with no viscous effects, of free stream acceleration, of an unheated starting length, and of boundary layer maturity are discussed. Mixing length and turbulent Prandtl number models are reviewed.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Von Karman Inst. for Fluid Dyn. Film Cooling and Turbine Blade Heat Transfer, Vol. 1; 29 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 25
    facet.materialart.
    Unknown
    An economic evaluation of solar energy (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The economic advantages of solar dish collectors are evaluated and compared with other energy systems. Labor, inflation and energy deregulation are considered.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Ann. Program Rev., Proc.; p 329-338
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 26
    facet.materialart.
    Unknown
    Potential benefits from a successful solar thermal program (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Solar energy systems were investigated which complement nuclear and coal technologies as a means of reducing the U.S. dependence on imported petroleum. Solar Thermal Energy Systems (STES) represents an important category of solar energy technologies. STES can be utilized in a broad range of applications servicing a variety of economic sectors, and they can be deployed in both near-term and long-term markets. The net present value of the energy cost savings attributable to electric utility and IPH applications of STES were estimated for a variety of future energy cost scenarios and levels of R&D success. This analysis indicated that the expected net benefits of developing an STES option are significantly greater than the expected costs of completing the required R&D. In addition, transportable fuels and chemical feedstocks represent a substantial future potential market for STES. Due to the basic nature of this R&D activity, however, it is currently impossible to estimate the value of STES in these markets. Despite this fact, private investment in STES R&D is not anticipated due to the high level of uncertainty characterizing the expected payoffs.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 295-318
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 27
    facet.materialart.
    Unknown
    Dish Stirling system integration and test progress report (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The integration and check-out of a complete Dish Solar Stirling Thermal Power System is described. The preliminary results of the tests conducted thus far are presented. The results are very encouraging and show promise of high performance and efficiency. The outstanding performance and durability of the 4-95 Stirling engine was the highlight of this 6 month integration and test activity. Exposure to severe heat, dust, sand and wind during the summer months and heavy rains, high winds, including sand storms and freezing cold in recent months did affected the engine or the receiver in any noticable manner.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 191-200
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 28
    facet.materialart.
    Unknown
    Recent tests on the Carter small reciprocating steam engines (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The Jay Carter Enterprises (JCE) Paratransit Vehicle steam engine was tested over a range of conditions which might be experienced by the power converter subsystem of the Small Community Solar Thermal Power Experiment. Some difficulties were encountered getting the engine ready for testing. These difficulties were related to the five year dormancy of the entire system and to incomplete development work that had been going on at the time of cessation of steam engine work at JCE. Other difficulties were related to the fact that the particular expander being tested never ran before and possessed some manufacturing defects. Nevertheless, the engine was operated successfully and results of testing do verify results of computer simulations of the engine in regard to the effect of temperature and power level variations. Engine efficiency was good but generally lower than expected and performance dropped as testing continued. The effect of change in expansion ratio was not demonstrated because of deterioration in engine performance. Post-test inspection revealed numerous correctable defects.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 123-145
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 29
    facet.materialart.
    Unknown
    High-temperature ceramic heat exchanger element for a solar thermal receiver (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A study was performed by AiResearch Manufacturing Company, a division of The Garrett Corporation, on the development a high-temperature ceramic heat exchanger element to be integrated into a solar receiver producing heated air. A number of conceptual designs were developed for heat exchanger elements of differing configuration. These were evaluated with respect to thermal performance, pressure drop, structural integrity, and fabricability. The final design selection identified a finned ceramic shell as the most favorable concept. The shell is surrounded by a larger metallic shell. The flanges of the two shells are sealed to provide a leak-tight pressure vessel. The ceramic shell is to be fabricated by an innovative combination of slip casting the receiver walls and precision casting the heat transfer finned plates. The fins are bonded to the shell during firing. The unit is sized to produce 2150 F ar at 2.7 atm pressure, with a pressure drop of about 2 percent of the inlet pressure. This size is compatible with a solar collector providing a receiver input of 85 kw(th). Fabrication of a one-half scale demonstrator ceramic receiver has been completed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 233-246
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 30
    facet.materialart.
    Unknown
    Modifications and testing of a 4-95 Stirling engine for solar applications (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The modifications and testing of a standard Stirling engine, required for connection to a 25 kW induction alternator, for use with a solar thermal parabolic dish electric module is described. Power was absorbed by a GE induction alternator connected to the utility grid. Also included are the results from recent testing of another solar engine at the DOE-Georgia Tech solar site. It was done in parallel with the testing at Edwards for the purpose of comparing performance of two solar-only receivers, which were based on the standard 4-95 involute heat exchanger.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 179-189
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 31
    facet.materialart.
    Unknown
    Verification testing of the PKI collector at Sandia National Laboratories, Albuquerque, New Mexico (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Verification testing of a solar collector was undertaken prior to its operation as part of an industrial process heat plant at Capitol Concrete Products in Topeka, Kansas. Testing was performed at a control plant installed at Sandia National Laboratory, Albuquerque, New Mexico (SNLA). Early results show that plant performance is even better than anticipated and far in excess of test criteria. Overall plant efficiencies of 65 to 80 percent were typical during hours of good insolation. A number of flaws and imperfections were detected during operability testing, the most important being a problem in elevation drive alignment due to a manufacturing error. All problems were corrected as they occurred and the plant, with over 40 hours of operation, is currently continuing operability testing in a wholly-automatic mode.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 115-118
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 32
    facet.materialart.
    Unknown
    Organic Rankine power conversion subsystem development for the small community solar thermal power system (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The development and preliminary test results for an air-cooled, hermetically sealed 20 kW sub E organic Rankine cycle engine/alternator unit for use with point focussing distributed receiver solar thermal power system. A 750 F toluene is the working fluid and the system features a high speed, single-stage axial flow turbine direct-coupled to a permanent magnet alternator. Good performance was achieved with the unit in preliminary tests.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 101-113
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 33
    facet.materialart.
    Unknown
    A transmittance-optimized, point-focus Fresnel lens solar concentrator (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The development of a point-focus Fresnel lens solar concentrator for high-temperature solar thermal energy system applications is discussed. The concentrator utilizes a transmittance-optimized, short-focal-length, dome-shaped refractive Fresnel lens as the optical element. This concentrator combines both good optical performance and a large tolerance for manufacturing, deflection, and tracking errors. The conceptual design of an 11-meter diameter concentrator which should provide an overall collector efficiency of about 70% at an 815 C (1500 F) receiver operating temperature and a 1500X geometric concentration ratio (lens aperture area/receiver aperture area) was completed. Results of optical and thermal analyses of the collector, a discussion of manufacturing methods for making the large lens, and an update on the current status and future plans of the development program are included.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 35-47
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 34
    facet.materialart.
    Unknown
    Analysis of the decay of temperature fluctuations in isotropic turbulence (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The Lagrangian dispersion theory of Durbin (1980) is used to analyze experiments by Warhaft and Lumley (1978) and by Sreenivasan et al. (1980) on temperature fluctuations in grid-generated turbulence. Both theory and experiment show that the decay exponent m depends on the ratio of the initial length scales of velocity and temperature, although when this ratio is greater than 2.5 such dependence is negligible. The theory shows that m is not truly constant, but within the range covered by the experiments it is nearly so. The agreement between theory and experiment lends credence to the idea that the decay of fluctuations is controlled largely by turbulent relative dispersion.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Physics of Fluids; 25; Aug. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 35
    facet.materialart.
    Unknown
    Lightning protection of wind turbines (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Possible damages to wind turbine components due to lightning strikes are discussed and means to prevent the damage are presented. A low resistance path to the ground is noted to be essential for any turbine system, including metal paths on nonmetal blades to conduct the strike. Surge arrestors are necessary to protect against overvoltages both from utility lines in normal operation and against lightning damage to control equipment and contactors in the generator. MOS structures are susceptible to static discharge injury, as are other semiconductor devices, and must be protected by the presence of static protection circuitry. It is recommended that the electronics be analyzed for the circuit transient response to a lightning waveform, to induced and dc current injection, that input/output leads be shielded, everything be grounded, and lightning-resistant components be chosen early in the design phase.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 36
    facet.materialart.
    Unknown
    Effect of thickness on silicon solar cell efficiency (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A computer-aided-design study on the dependence of the efficiency peak of a back-surface field solar cell on the concentrations of the recombination and dopant impurities is presented. The illuminated current-voltage characteristics of more than 100 cell designs are obtained using the transmission line circuit model to numerically solve the Shockley equations. Using an AM 1 efficiency of 17% as a target value, it is shown that the efficiency versus thickness dependence has a broad maximum which varies by less than 1% over more than a three-to-one range of cell thicknesses from 30 to 100 microns. An optically reflecting back surface will give only a slight improvement of AM 1 efficiency, about 0.7%, in this thickness range. Attention is given to the dependence of the efficiency on patchiness across the back-surface field low-high junction in thin cells.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: IEEE Transactions on Electron Devices; ED-29; May 1982
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 37
    facet.materialart.
    Unknown
    Axisymmetric inviscid swirling flows produced by bellmouth and centerbody (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The effect of large deformation in the flow between the bellmouth and centerbody is considered analytically for application to studies of vortex breakdown in a pipe. Basic equations are defined for axisymmetric inviscid swirling flows at the inflow and outflow sections. Axial and circumferential velocity component profiles are presented, and comparisons are made with trials involving vane angles of 42 deg and Re of 2300. Axial components of the prediction matched well in the inner half of the pipe radius and not well with the outer, while circumferential predictions were good only at the axis. A lack of viscosity was concluded to result in the inaccuracies near the wall.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: AIAA Journal; 20; Apr. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 38
    facet.materialart.
    Unknown
    Study of incompressible turbulent channel flow by large eddy simulation (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Incompressible turbulent channel flow is investigated by large eddy simulation using improved numerical methods and boundary conditions. In downstream and spanwise directions, cyclic boundary conditions are imposed for velocity and pressure, and two types of boundary conditions near the wall are used and compared. One type is based on the logarithmic law of the mean velocity near the wall and has a slip boundary condition where the molecular-viscous term is neglected. The other type is based on a no-slip boundary condition, where fine mesh spacing near the wall is used to take account of the molecular viscosity. Although the present study employs a coarse mesh (16 x 16 x 21), its results are in good agreement with those of Moin and Kim (1981).
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 39
    facet.materialart.
    Unknown
    Developing flow in S-shaped ducts (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The velocity characteristics of laminar and turbulent developing flow in an S-duct formed from two 22.5-deg bends of rectangular cross-section have been studied experimentally using laser Doppler velocimetry. It is shown that pressure-driven secondary flows arise in the first bend of the duct and reach maxima of 0.22 and 0.15 of the bulk velocity in the laminar and turbulent flows, respectively. The velocities are greater in the laminar flow, mainly because of the thicker inlet boundary layers. On passing through the second half of the S-duct, a secondary flow is established over most of the section in the direction opposite to that in the first half. Near the outer wall of the second bend, however, the secondary flow generated in the first bend is sustained because of the local sign of radial vorticity. This effect contributes to a redistribution of the streamwise isotachs, by the end of the duct, comparable with that in unidirectional bends.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 40
    facet.materialart.
    Unknown
    Interaction between cast silicon properties and solar cell performance (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Three types of cast silicon, Silso, HEM (Heat-Exchanger Method) and UCP (Ubiquitous Crystallization Process) were studied for their use as solar cells. Optical microscopy after etching revealed a high density of uniform dislocations (approaching 1,000,000/sq cm), lines of dislocations indicating stress during crystal growth, and precipitates, some of which generate dislocations. Solar cells were fabricated by three processes. Results of solar cell processing revealed that these materials produce cells of lower efficiency than Czochralski control cells, and that the efficiencies of the three materials were quite close. Diffusion length and spectral response data are shown. Certain structural features are correlated with solar cell efficiency, diffusion length, and spectral response. Electron-beam induced current (EBIC) and light spot scanning are used to back up other measurements.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 41
    facet.materialart.
    Unknown
    Stability of erythrocyte suspensions layered on stationary and flowing liquids (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The apparent stability of erythrocyte suspensions layered on stationary and flowing Ficoll solutions was studied considering the effects of particle concentration, type and size, and the different flow rates of the particle suspensions and chamber liquid. The data from the flowing system were empirically fitted and, when extrapolated to zero chamber liquid flow rate, gave values comparable to the data from the stationary system, thus confirming the validity of the data and our approach to obtain that data.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Separation Science and Technology; 17; 6, 19; 1982
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 42
    facet.materialart.
    Unknown
    Configuration selection study for isolated loads using parabolic dish modules (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A configuration tradeoff study was conducted to determine optimum solar thermal parabolic dish power systems for isolated load applications. The specific application of an essentially constant power demand as required for MX missile shelters is treated. Supplying a continuous level of power with high reliability is shown to require a power system comprising modular parabolic dish power units where the heat engines of the modular power units can be driven by fossil fuels as well as solar-derived heat. Since constraints on reliability result in the provision of a power generating capability that exceeds the constant demand level, efficient utilization of the power system requires battery storage. Tradeoffs regarding the optimum size of storage are investigated as a function of the number of power modules and the cost of the fossil fuel.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 319-328
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 43
    facet.materialart.
    Unknown
    Ceramic high temperature receiver design and tests (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The High Temperature Solar Thermal Receiver, which was tested a Edwards AFB, CA during the winter of 1980-1981, evolved from technologies developed over a five year period of work. This receiver was tested at the Army Solar Furnace at White Sands, NM in 1976. The receiver, was tested successfully at 1768 deg F and showed thermal efficiencies of 85%. The results were sufficiently promising to lead ERDA to fund our development and test of a 250 kW receiver to measure the efficiency of an open cavity receiver atop a central tower of a heliostat field. This receiver was required to be design scalable to 10, 50, and 100 MW-electric sizes to show applicability to central power tower receivers. That receiver employed rectagular silicon carbide panels and vertical stanchions to achieve scalability. The construction was shown to be fully scalable; and the receiver was operated at temperatures up to 2000 deg F to achieve the performance goals of the experiment during tests at the GIT advanced components test facility during the fall of 1978.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc. 247-255 (SEE N83-10525 01-44)
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 44
    facet.materialart.
    Unknown
    The French thermo-helio-electricity-KW parabolic dish program (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The testing and development of parabolic dish solar thermal power plants to produce, thermal mechanical, or electrical energy are discussed. The design, construction, and experiments of prototype collectors to prove the feasibility of such collectors is described.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 225-231
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 45
    facet.materialart.
    Unknown
    Development status of the small community solar power system (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The development status and test results for the Small Community Solar Thermal Power Experiment are presented. Activities on the phase 2 power module development effort are presented with emphasis on the receiver, the plant control subsystem, and the energy transport subsystem. The components include a single prototype power module consisting of a parabolic dish concentrator, a power conversion assembly (PCA), and a multiple-module plant control subsystem. The PCA consists of a cavity receiver coupled to an organic Rankine cycle engine-alternator unit defined as the power conversion subsystem; the PCA is mounted at the focus of a parabolic dish concentrator. At a solar insolation of 100 W/sq m and ambient temperature of 28 C (82 F), the power module produces approximately 20 kW of 3-phase, 3 kHz ac power, depending on the concentrator employed. A ground-mounted rectifier to the central collection site where it is supplied directly to the common dc bus which collects the power from all modules in the plant.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 53-99
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 46
    facet.materialart.
    Unknown
    Acurex Parabolic Dish Concentrator (PDC-2) (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The design approach, rationale for the selected configuration, and the development status of a cost effective point-focus solar concentrator are discussed. The low-cost concentrator reflective surface design is based on the use of a thin, backsilvered mirror glass reflector bonded to a molded structural plastic substrate. The foundation, support, and drive subassembles are described. A hybrid, two-axis, Sun tracking control system based on microprocessor technology was selected. Coarse synthetic tracking is achieved through a microcomputer-based control system to calculate Sun position for transient periods of cloud cover as well as sundown and sunrise positioning. Accurate active tracking is achieved by two-axis optical sensors. Results of the reflective panel demonstration tests investigating slope error, hail impact survivability, temperature/humidity cycling, longitudinal strength/bending stiffness, and torsional stiffness are discussed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 15-20
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 47
    facet.materialart.
    Unknown
    Development status of the PDC-1 Parabolic Dish Concentrator (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The status of development of the 12 m diameter parabolic dish concentrator which is planned for use with the Small Community Solar Thermal Power System. The PDC-1 unit features the use of plastic reflector film bonded to structural plastic gores supported by front-bracing steel ribs. An elevation-over-azimuth mount arrangement is employed, with a conventional wheel-and-track arrangement; outboard trunnions permit the dish to be stored in the face down position, with the added advantage of easy access to the power conversion assembly. The control system is comprised of a central computer (LSI 1123), a manual control panel, a concentrator control unit, two motor controllers, a Sun sensor, and two angular position resolvers. The system is designed for the simultaneous control of several concentrators. The optical testing of reflective panels is described.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 3-13
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 48
    facet.materialart.
    Unknown
    Commercialization of parabolic dish systems (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The impact of recent federal tax and regulatory legislation on the commercialization of parabolic solar reflector technology is assessed. Specific areas in need of technical or economic improvement are noted.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 201-205
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 49
    facet.materialart.
    Unknown
    PKI solar thermal plant evaluation at Capitol Concrete Products, Topeka, Kansas (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A system feasibility test to determine the technical and operational feasibility of using a solar collector to provide industrial process heat is discussed. The test is of a solar collector system in an industrial test bed plant at Capitol Concrete Products in Topeka, Kansas, with an experiment control at Sandia National Laboratories, Albuquerque. Plant evaluation will occur during a year-long period of industrial utilization. It will include performance testing, operability testing, and system failure analysis. Performance data will be recorded by a data acquisition system. User, community, and environmental inputs will be recorded in logs, journals, and files. Plant installation, start-up, and evaluation, are anticipated for late November, 1981.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 119-121
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 50
    facet.materialart.
    Unknown
    The small community solar thermal power experiment (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: the objectives and current status of the Small Community Solar Thermal Power Experiment are discussed. The adjustments in programs goals made in response to the changing emphasis in the area of solar energy in national policy are addressed. Planned fabrication and testing activities for the test bed concentrator, power conversion assembly, and control system are outlined.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 49-52
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 51
    facet.materialart.
    Unknown
    The PKI collector (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The design and manufacturing of a solar thermal collector is discussed. The collector has three primary subsystems: concentrator, receiver/fluid loop, and controls. Identical curved reflective columns are utilized in a faceted Fresnel design to support 864 one foot square flat inexpensive second-surface, silvered glass mirrors. The columns are ganged together and rotated through their centers of gravity to provide elevation tracking. The concentrator is supported by a lightweight spaceframe structure which distributes all wind and gravity loads to the base supports. The base of the structure is a track which rotates on wheels mounted on concrete piers. A parallel tube steel heat exchanger is mounted at the concentrator focal area in a well insulated, galvanized steel housing. Two rows of vertical close-packed, staggered tubes connect a mud header and a steam header. Automatic two axis tracking and operational control is provided with a microprocessor based package. Concentrator-mounted shadowbands are the basis for active tracking. A software program provides azimuthal tracking during cloudy periods.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 25-34
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 52
    facet.materialart.
    Unknown
    Garrett solar Brayton engine/generator status (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The solar advanced gas turbine (SAGT-1) is being developed by the Garrett Turbine Engine Company, for use in a Brayton cycle power conversion module. The engine is derived from the advanced gas turbine (AGT101) now being developd by Garrett and Ford Motor Company for automotive use. The SAGT Program is presently funded for the design, fabrication and test of one engine at Garrett's Phoenix facility. The engine when mated with a solar receiver is called a power conversion module (PCU). The PCU is scheduled to be tested on JPL's test bed concentrator under a follow on phase of the program. Approximately 20 kw of electrical power will be generated.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 257-282
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 53
    facet.materialart.
    Unknown
    A point focusing collector for an integrated water/power complex (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The utilization potential of the point focusing parabolic dish is identified. Its main design parameters are summarized. Performance tests and the utilization of the collector as primary energy source in a food-water-power complex are described. Process heat, heat storage, heat transfer, and cogeneration are discussed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 207-223
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 54
    facet.materialart.
    Unknown
    A discrete gust model for use in the design of wind energy conversion systems (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A discrete gust model has been designed which includes an expression for the number of times per unit time thy wind exceeds a specific value. This expression, based on Rice's (1944, 1945) number-of-crossings model, assumes that the yearly mean wind speed is averaged over a period of 10 minutes to 1 (one) hour. Vertical and lateral coherence functions are the basis for a mathematical filter which isolates atmospheric disturbances of a characteristic size (e. g., those which would completely engulf a rotor). Predictions are calculated usising the given definition of cut-off frequency, then they are compared with actual data, showing that the model is reliable. The expression is provided in a format such that it may be used for engineering design calculations.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Journal of Applied Meteorology; 21; June 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 55
    facet.materialart.
    Unknown
    Cauchy integral method for two-dimensional solidification interface shapes (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A method is developed to determine the shape of steady state solidification interfaces formed when liquid above its freezing point circulates over a cold surface. The solidification interface, which is at uniform temperature, will form in a shape such that the non-uniform energy convected to it is locally balanced by conduction into the solid. The interface shape is of interest relative to the crystal structure formed during solidification; regulating the crystal structure has application in casting naturally strengthened metallic composites. The results also pertain to phase-change energy storage devices, where the solidified configuration and overall heat transfer are needed. The analysis uses a conformal mapping technique to relate the desired interface coordinates to the components of the temperature gradient at the interface. These components are unknown because the interface shape is unknown. A Cauchy integral formulation provides a second relation involving the components, and a simultaneous solution yields the interface shape.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: International Journal of Heat and Mass Transfer; 25; July 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 56
    facet.materialart.
    Unknown
    Calculation of radiation from argon shock layers (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The accuracy of calculations of the radiation emissions from argon plasmas produced by the shock layers over blunt bodies is assessed. The existing theoretical and experimental spectroscopic data on argon are collated. A set of such data is selected for use in the radiative transfer calculations. Calculations are performed for the stagnation regions of the shock layers over laboratory-sized models using these data, and the results are compared with the existing experimental results obtained in a shock-tube. Through this comparison and a parametric study it is shown that radiative heat fluxes at the stagnation point in an argon environment can be calculated within an uncertainty of about 15%. It is shown also that radiative heat fluxes of the order of 100 kW/sq cm can be produced in the existing laboratory facilities.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Journal of Quantitative Spectroscopy and Radiative Transfer; 28; July 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 57
    facet.materialart.
    Unknown
    Solar/hydrogen systems for the 1985-2000 time frame - A review and assessment (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A comprehensive state-of-the-art review of solar/hydrogen technologies has been conducted. From this, solar/hydrogen production systems which could be commercialized by the year 2000 have been characterized technically and economically. Incentives and disincentives for the early commercialization of four solar/hydrogen systems have been explored, conclusions drawn and recommendations made.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: International Journal of Hydrogen Energy; 7; 1, 19; 1982
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 58
    facet.materialart.
    Unknown
    Resonant entrainment of a confined pulsed jet (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: This paper reports the discovery of a new resonant entrainment phenomenon associated with a confined, pulsed jet flow. It was found that a confined jet, when pulsed at an organ-pipe resonant frequency of the confinement tube, experiences greatly enhanced entrainment and mixing near the exit end of the confinement tube compared to a steady confined jet. The mixing and entrainment rates for the resonantly pulsed confined jet approach, and in some cases slightly exceed, those for an unconfined pulsed jet. Both visual and quantitative evidence of this phenomenon is presented. The new effect should be of considerable interest in ejector and combustor design, both of which benefit from any enhancement in mixing between a primary and a secondary flow
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 59
    facet.materialart.
    Unknown
    Use of thermocapillary migration in a controllable heat valve (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: In accordance with the Marangoni effect, immiscible droplets in a host fluid in which a temperature gradient exists move in the direction of increasing temperature. It is proposed that this thermocapillary migration could be used to construct a 'liquid wick' that would return the condensed vapor at the condenser end of a heat pipe back to the evaporator, thus completing the fluid circuit. The droplets would be formed by capillary pressure forcing the condensate through a perforated diaphragm whose temperature would control the droplet flux, and hence the heat flux between the two ends of the heat pipe, thus making it a controllable heat valve.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Journal of Applied Physics; 53; Dec. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 60
    facet.materialart.
    Unknown
    Planar multijunction high voltage solar cell chip (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A new innovative planar multijunction solar cell chip for concentrated sunlight applications is proposed. The chip consists of many voltage-generating regions, called unit cells, which are connected in series within a single silicon wafer, thereby providing a high open-circuit voltage at multiple sun illumination levels. The unit cells are fabricated on 75 micron thick p-type single crystal silicon substrate. Each chip consists of 1.42 x 9.63 mm n(+)/p collecting junctions on the back of the wafer, while the illuminated front surface area is divided into 0.3 micron deep n(+) regions. The fabrication sequence includes standard degreasing and cleaning procedures, double-sided alignment photomasking, introduction of boron and phosphorus impurities, and photolithography. The open circuit voltage of the chip increased rapidly with illumination up to about 4 AM1 suns, and then began to saturate at the sum of the individual unit cell voltages of 3.5 above 4 AM1 suns. A short circuit density per unit cell of 300 mA/sq cm at 20 AM1 suns was observed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Journal of Applied Physics; 53; Nov. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 61
    facet.materialart.
    Unknown
    A review of resonance response in large, horizontal-axis wind turbines (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: (Previously announced in STAR as N82-23711)
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Solar Energy; 29; 5, 19; 1982
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 62
    facet.materialart.
    Unknown
    Calibration of solar cells by the reference cell method - The spectral mismatch problem (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The calibration of solar cells by means of solar simulators and calibrated reference cells has always been faced with the problem of errors due to source spectral irradiance mismatch and cell spectral response mismatch. A general expression is derived in this paper to enable calculation of mismatch error. The information required to make this calculation is the relative spectra responses of the test and reference cells, and the relative spectral irradiance of the simulator (over the spectral range defined by cell response). The spectral irradiance of the solar standard is assumed given. Experimental results are presented.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Solar Energy; 29; 4, 19; 1982
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 63
    facet.materialart.
    Unknown
    Determination of boundary shape of cooled porous region (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The shape of a cooled porous wall section is found that will provide a uniform surface temperature, as dictated by material limitations, when the surface is subjected to spatially nonuniform heating. In the analysis, local temperatures and pressures in the porous material are expressed in terms of a potential function. From the imposed thermal conditions, this potential function is governed by the dual constraints of both its value and its normal derivative being specified along the heated surface. The unknown shape of this surface is obtained by meeting these dual conditions. The analytical method uses a generalized conformal mapping procedure that includes a curved boundary. The coolant flow can be compressible or incompressible, and its viscosity can depend on temperature.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 64
    facet.materialart.
    Unknown
    Hybrid thermoelectric solar collector design and analysis (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A flat-plate solar collector is conceived where energy cascades through thermoelectric power modules generating direct-current electricity. The intent of this work was to choose a collector configuration and to perform a steady-state thermal performance assessment. A set of energy balance equations were written and solved numerically for the purpose of optimizing collector thermal and electrical performance. The collector design involves finned columns of thermoelectric modules imbedded in the absorber plate (hot junction) over a parallel array of vertical tubes. The thermoelectric power output is limited by the small hot-junction/cold-junction temperature difference which can be maintained under steady-state conditions. The electric power per unit tube pass area is found to have a maximum as a function of a geometric parameter, while electric power is maximized with respect to an electric resistance ratio. Although the electric power efficiency is small, results indicate that there is sufficient electric power production to drive a coolant circulator, suggesting the potential for a stand-alone system.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 65
    facet.materialart.
    Unknown
    Energy consumption analysis for the Mars deep space station (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Results for the energy consumption analysis at the Mars deep space station are presented. It is shown that the major energy consumers are the 64-Meter antenna building and the operations support building. Verification of the antenna's energy consumption is highly dependent on an accurate knowlege of the tracking operations. The importance of a regular maintenance schedule for the watt hour meters installed at the station is indicated.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: The Telecommun. and Data Acquisition Rept.; p 200-207
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 66
    facet.materialart.
    Unknown
    Analysis of capacitive heat exchangers, part 2 (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The performance of a simple capacitive heat exchanger was analyzed. The shooting method for solving the governing equations is presented. Simplified linear and nonlinear models are analyzed using this method and it is shown that capacitive heat exchangers are more efficient than conventional ones.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: The Telecommun. and Data Acquisition Rept.; p 126-144
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 67
    facet.materialart.
    Unknown
    A simplified solar cell array modelling program (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: As part of the energy conversion/self sufficiency efforts of DSN engineering, it was necessary to have a simplified computer model of a solar photovoltaic (PV) system. This article describes the analysis and simplifications employed in the development of a PV cell array computer model. The analysis of the incident solar radiation, steady state cell temperature and the current-voltage characteristics of a cell array are discussed. A sample cell array was modelled and the results are presented.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: The Telecommun. and Data Acquisition Rept.; p 167-185
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 68
    facet.materialart.
    Unknown
    Experience with specifications applicable to certification (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The Jet Propulsion Laboratory has developed a number of photovoltaic test and measurement specifications to guide the development of modules toward the requirements of future large-scale applications. Experience with these specifications and the extensive module measurement and testing that has accompanied their use is examined. Conclusions are drawn relative to three aspects of product certification: performance measurement, endurance testing and safety evaluation.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 69
    facet.materialart.
    Unknown
    Layered transition metal thiophosphates /MPX3/ as photoelectrodes in photoelectrochemical cells (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Layered crystals of the transition metal thiophosphates were synthesized and characterized for use as photoelectrodes in photoelectrochemical cells. Crystals incorporating tin and manganese show n-type response while those with iron and nickel show p-type response. These materials have a measured indirect bandgap of about 2.1 eV. They show ability to photoelectrolyze water in acid solutions with onset potentials which change in a Nernstian way as the PH of the solution changes. The onset potential is near zero volts versus a saturated calomel electrode at pH 2. At n-type crystals, oxygen could be evolved upon irradiation at underpotentials of 850 mV and at p-type crystals, hydrogen could be evolved at underpotentials of 400 mV, indicating a net gain in energy conversion. All crystals were unstable in basic solution. Liquid junction photovoltaic cells in iodide-triiodide acid solution using these layered materials were also constructed and found to have low efficiences.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Solar Energy Materials; 7; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 70
    facet.materialart.
    Unknown
    Spouts in a bed of silica powder associated with fluidization by outgassing of adsorbed water (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: International Journal of Multiphase Flow; 8; 4, 19; 1982
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 71
    facet.materialart.
    Unknown
    On current aspects of finite element computational fluid mechanics for turbulent flows (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A set of nonlinear partial differential equations suitable for the description of a class of turbulent three-dimensional flow fields in select geometries is identified. On the basis of the concept of enforcing a penalty constraint to ensure accurate accounting of ordering effects, a finite element numerical solution algorithm is established for the equation set and the theoretical aspects of accuracy, convergence and stability are identified and quantized. Hypermatrix constructions are used to formulate the reduction of the computational aspects of the theory to practice. The robustness of the algorithm, and the computer program embodiment, have been verified for pertinent flow configurations.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 72
    facet.materialart.
    Unknown
    An analytical approach to thermal modeling of Bridgman-type crystal growth. I - One-dimensional analysis (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A relatively simple one-dimensional thermal model of the Bridgman growth process has been developed which is applicable to the growth of small diameter samples with conductivities similar to those of metallic alloys. The heat flow in a translating rod is analyzed in a way that is applicable to Biot numbers less than unity. The model accommodates an adiabatic zone, different heat transfer coefficients in the hot and cold zones, and changes in sample material properties associated with phase change. The analysis is applied to several simplified cases. The effect of the rod's motion is studied in a three-zone furnace for a rod sufficiently long that end effects can be neglected; end effects are then investigated for a motionless rod. Finally, the addition of a fourth zone, an independently controlled booster heater between the main heater and the adiabatic zone, is evaluated for its ability to increase the gradient in the sample at the melt interface and to control the position of the interface.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Journal of Crystal Growth; 58; 1982
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 73
    facet.materialart.
    Unknown
    Panel discussions: Industrial support sector requirements (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Industrial support was the subject of a panel discussion on solar energy technology. Members of various energy-related businesses and agencies were present. Topics cofered include: (1) solar collectors; (2) solar energy policy; (3) government/industry relations; and (4) economic factors which influence the use of solar energy.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 339-353
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 74
    facet.materialart.
    Unknown
    Application of the subatmospheric engine to solar thermal power (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The development of a natural gas-fired Brayton engine is discussed. It is intended to be the prime mover for a 10-ton commercial heat pump. This engine has many attractive features that make it an ideal candidate for solar thermal-power generation applications. The unique feature of this engine is its subatmospheric mode of operation. It operates between atmospheric pressure and a partial vacuum. This means that heat is added to the cycle at atmospheric pressure; this permits the receiver to be unpressurized, greatly simplifying its design and cost.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 283-293
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 75
    facet.materialart.
    Unknown
    Thin film concentrator panel development (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The development and testing of a rigid panel concept that utilizes a thin film reflective surface for application to a low-cost point-focusing solar concentrator is discussed. It is shown that a thin film reflective surface is acceptable for use on solar concentrators, including 1500 F applications. Additionally, it is shown that a formed steel sheet substrate is a good choice for concentrator panels. The panel has good optical properties, acceptable forming tolerances, environmentally resistant substrate and stiffeners, and adaptability to low to mass production rates. Computer simulations of the concentrator optics were run using the selected reflector panel design. Experimentally determined values for reflector surface specularity and reflectivity along with dimensional data were used in the analysis. The simulations provided intercept factor and net energy into the aperture as a function of aperture size for different surface errors and pointing errors. Point source and Sun source optical tests were also performed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 25-34
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 76
    facet.materialart.
    Unknown
    A 400-kWe high-efficiency steam turbine for industrial cogeneration (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: An advanced state-of-the-art steam turbine-generator developed to serve as the power conversion subsystem for the Department of Energy's Sandia National Laboratories' Solar Total-Energy Project (STEP) is described. The turbine-generator, which is designed to provide 400-kW of net electrical power, represents the largest turbine-generator built specifically for commercial solar-powered cogeneration. The controls for the turbine-generator incorporate a multiple, partial-arc entry to provide efficient off-design performance, as well as an extraction control scheme to permit extraction flow regulation while maintaining 110-spsig pressure. Normal turbine operation is achieved while synchronized to a local utility and in a stand-alone mode. In both cases, the turbine-generator features automatic load control as well as remote start-up and shutdown capability. Tests totaling 200 hours were conducted to confirm the integrity of the turbine's mechanical structure and control function. Performance tests resulted in a measured inlet throttle flow of 8,450 pounds per hour, which was near design conditions.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 147-177
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 77
    facet.materialart.
    Unknown
    Thickness dependences of solar cell performance (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The significance of including factors such as the base resistivity loss for solar cells thicker than 100 microns and emitter and BSF layer recombination for thin cells in predicting the fill factor and efficiency of solar cells is demonstrated analytically. A model for a solar cell is devised with the inclusion of the dopant impurity concentration profile, variation of the electron and hole mobility with dopant concentration, the concentration and thermal capture and emission rates of the recombination center, device temperature, the AM1 spectra and the Si absorption coefficient. Device equations were solved by means of the transmission line technique. The analytical results were compared with those of low-level theory for cell performance. Significant differences in predictions of the fill factor resulted, and inaccuracies in the low-level approximations are discussed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Solid-State Electronics; 25; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 78
    facet.materialart.
    Unknown
    Reduction of solar cell efficiency by edge defects across the back-surface-field junction - A developed perimeter model (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Material imperfections, impurity clusters and fabrication defects across the back-surface-field junction can degrade the performance of high-efficiency solar cells. The degradation from defects appearing on the circumference of a solar cell is analyzed using a two-region developed perimeter device model. The width of the defective perimeter region is characterized by the range or the distance-of-influence of the defective edge and this width is about two diffusion lengths. The defective edge is characterized by a surface recombination velocity. Family of theoretical curves and numerical examples are presented to show that significant reduction of open-circuit voltage can occur in high-efficiency cells which are thin compared with the diffusion length. In one example, the degradation is decreased from 135 mV to 75 mV when the cell size is increased from 10 to 100 times the diffusion length in a thin cell whose thickness is 1% of the diffusion length.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Solid-State Electronics; 25; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 79
    facet.materialart.
    Unknown
    A technique for determining solar irradiance deficits (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: An analytic technique which determines the variation of solar irradiance from long term averages is presented. The technique involves computer-assisted data reduction techniques, and was designed to improve system reliability by determining the amount of storage capability required to supplement a baseline system. Variations in time intervals of up to 60 days can be determined, and 10 years of data collection are reviewed. The technique involves first calculating average monthly irradiance values, then examining the average irradiance deviation over time intervals. The calculation procedure is clarified by determining solar energy level probabilities and the long term solar energy deviation (achieved by repeatedly integrating actual irradiance figures). It is found that a 15% increase in collector area and the addition of energy storage or backup are essential contributions to achieving cost-effectiveness. In addition, one to seven no-sun day storage capacities are required to accommodate weather caused deficits.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: IEEE Transactions on Reliability; R-31; Aug. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 80
    facet.materialart.
    Unknown
    Investigating reliability attributes of silicon photovoltaic cells - An overview (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Reliability attributes are being developed on a wide variety of advanced single-crystal silicon solar cells. Two separate investigations: cell-contact integrity (metal-to-silicon adherence), and cracked cells identified with fracture-strength-reducing flaws are discussed. In the cell-contact-integrity investigation, analysis of contact pull-strength data shows that cell types made with different metallization technologies, i.e., vacuum, plated, screen-printed and soldered, have appreciably different reliability attributes. In the second investigation, fracture strength was measured using Czochralski wafers and cells taken at various stages of processing and differences were noted. Fracture strength, which is believed to be governed by flaws introduced during wafer sawing, was observed to improve (increase) after chemical polishing and other process steps that tend to remove surface and edge flaws.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: IEEE Transactions on Reliability; R-31; Aug. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 81
    facet.materialart.
    Unknown
    Qualification testing of flat-plate photovoltaic modules (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The placement of photovoltaic modules in various applications, in climates and locations throughout the world, results in different degrees and combinations of environmental and electrical stress. Early detection of module reliability deficiencies via laboratory testing is necessary for achieving long, satisfactory field service. This overview paper describes qualification testing techniques being used in the US Department of Energy's flat-plate terrestrial photovoltaic development program in terms of their significance, rationale for specified levels and durations, and test results.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: IEEE Transactions on Reliability; R-31; Aug. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 82
    facet.materialart.
    Unknown
    Accelerated stress testing of terrestrial solar cells (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The development of an accelerated test schedule for terrestrial solar cells is described. This schedule, based on anticipated failure modes deduced from a consideration of IC failure mechanisms, involves bias-temperature testing, humidity testing (including both 85-85 and pressure cooker stress), and thermal-cycle thermal-shock testing. Results are described for 12 different unencapsulated cell types. Both gradual electrical degradation and sudden catastrophic mechanical change were observed. These effects can be used to discriminate between cell types and technologies relative to their reliability attributes. Consideration is given to identifying laboratory failure modes which might lead to severe degradation in the field through second quadrant operation. Test results indicate that the ability of most cell types to withstand accelerated stress testing depends more on the manufacturer's design, processing, and worksmanship than on the particular metallization system. Preliminary tests comparing accelerated test results on encapsulated and unencapsulated cells are described.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: IEEE Transactions on Reliability; R-31; Aug. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 83
    facet.materialart.
    Unknown
    Photovoltaic array reliability optimization (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: An overview of the photovoltaic array reliability problem is presented, and a high reliability/minimum cost approach to this problem is presented. Design areas covered are cell failure, interconnect fatigue, and electrical insulation breakdown, and three solution strategies are discussed. The first involves controlling component failures in the solar cell (cell cracking, cell interconnects) and at the module level (must be statistically treated). Second, a fault tolerant circuit is designed which reduces array degradation, improves module yield losses, and controls hot-spot heating. Third, cost optimum module replacement strategies are also effective in reducing array degradation. This can be achieved by minimizing the life-cycle energy cost of the photovoltaic system. The integration of these solutions is aimed at reducing the 0.01% failure rate.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: IEEE Transactions on Reliability; R-31; Aug. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 84
    facet.materialart.
    Unknown
    Photovoltaic module reliability improvement through application testing and failure analysis (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: During the first four years of the U.S. Department of Energy (DOE) National Photovoltatic Program, the Jet Propulsion Laboratory Low-Cost Solar Array (LSA) Project purchased about 400 kW of photovoltaic modules for test and experiments. In order to identify, report, and analyze test and operational problems with the Block Procurement modules, a problem/failure reporting and analysis system was implemented by the LSA Project with the main purpose of providing manufacturers with feedback from test and field experience needed for the improvement of product performance and reliability. A description of the more significant types of failures is presented, taking into account interconnects, cracked cells, dielectric breakdown, delamination, and corrosion. Current design practices and reliability evaluations are also discussed. The conducted evaluation indicates that current module designs incorporate damage-resistant and fault-tolerant features which address field failure mechanisms observed to date.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: IEEE Transactions on Reliability; R-31; Aug. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 85
    facet.materialart.
    Unknown
    Curved ducts with strong secondary motion - Velocity measurements of developing laminar and turbulent flow (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Two orthogonal components of velocity and associated Reynolds stresses are determined in a square-sectioned, 90 degree bend of 2.3 radius ratio by utilizing laser-Doppler velocimetry for Reynolds numbers of 790 and 40,000. Results show that boundary layers at the bend inlet of 0.25 and 0.15 of the hydraulic diameter create secondary velocity maxima of 0.6 and 0.4 of the bulk flow velocity, respectively. It is concluded that the boundary layer thickness is important to the flow development, mainly in the first half of the bend, especially when it is reduced to 0.15 of the hydraulic diameter. Smaller secondary velocities are found for turbulent flow in an identical duct with a radius ratio of 7.0 than in the strongly curved bend, although their effect is more important to the streamwise flow development because of the smaller pressure gradients. In addition, the detail and accuracy of the measurements make them suitable for evaluation of numerical techniques and turbulence models.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 86
    facet.materialart.
    Unknown
    Numerical solutions for the spin-up of a stratified fluid (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The model of Warn-Varnas et al. (1978) is used to numerically examine the spin-up flow of a thermally stratified fluid in a cylinder with an insulating side wall, and comparison of the results with the laser-Doppler measurements of Lee (1975) shows excellent agreement. It is shown that flow gradients are created in the interior of the fluid during the meridional circulation spin-up phase, and that the azimuthal flow decayed faster than has been predicted by Wallin (1969). It is established that viscous diffusion in the interior, arising from the interior-flow gradients, is the cause of the discrepancy with Wallin's theory.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Journal of Fluid Mechanics; 117; Apr. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 87
    facet.materialart.
    Unknown
    Reduction of solar cell efficiency by bulk defects across the back-surface-field junction (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The degradation of solar cell performance due to bulk defects distributed across the back-surface field junction is analyzed in terms of a three-region developed-perimeter model. Families of curves are computed and their physical significance is discussed in detail with reference to three parameters used to characterize the defects: defect area, defect density, and defect surface recombination velocity. A reduction in the open-circuit voltage due to the presence of a defect is expressed as a function of the defect area, density, cell thickness, and defect surface recombination velocity. Numerical examples are presented to illustrate the importance of the particular defect parameters.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Journal of Applied Physics; 53; Apr. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 88
    facet.materialart.
    Unknown
    Topology of three-dimensional separated flows (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A Legendre formulation for a pattern of streamlines adjacent to a surface considered as trajectories with properties consistent with those of a constant vector field is used to develop a mathematical framework for three-dimensional separated flows. Convergence of skin-friction lines onto a particular skin-friction line originating from a particular saddle point is defined as a necessary condition for flow separation. Steady, three-dimensional flow is considered, and singular points occurring in the skin-friction lines are shown to happen where the skin friction or the surface vorticity become zero, and become nodal or saddle points. The separation initiates and continues only globally, as a mixture of an infinite set of friction lines, or locally, with one line. The topography of streamlines in two-dimensional sections of three-dimensional flows is discussed, and examples are provided of a round-nosed body of revolution at varying angles of attack.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 89
    facet.materialart.
    Unknown
    Heat transfer from combustion gases to a single row of closely spaced tubes in a swirl crossflow Stirling engine heater (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: This paper describes an experimental program to determine the heat-transfer characteristics of a combustor and heat-exchanger system in a hybrid solar receiver which utilizes a Stirling engine. The system consists of a swirl combustor with a crossflow heat exchanger composed of a single row of 48 closely spaced curved tubes. In the present study, heat-transfer characteristics of the combustor/heat-exchanger system without a Stirling engine have been studied over a range of operating conditions and output levels using water as the working fluid. Nondimensional heat-transfer coefficients based on total heat transfer have been obtained and are compared with available literature data. The results show significantly enhanced heat transfer for the present geometry and test conditions. Also, heat transfer along the length of the tubes is found to vary, the effect depending upon test condition.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 90
    facet.materialart.
    Unknown
    The dependence of the shape and stability of captive rotating drops on multiple parameters (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Asymptotic and numerical techniques in bifurcation theory are applied to the Young-Laplace equation governing meniscus shape in order to analyze the dependence of the shape and stability of rigidly rotating drops held captive between corotating solid faces on multiple parameters. Asymptotic analysis of the evolution of drop shape from the cylindrical as a function of distance between the solid faces, drop volume, rotational Bond number and gravitational Bond number shows that some shape bifurcations from cylinders to wavy, axisymmetric menisci are ruptured by small changes in drop volume or gravity. Computer calculations of axisymmetric drop shapes based on a finite element representation of the interface and numerical algorithms for tracking shape families and singular points are then used to map drop stability for the four-dimensional parameter space. The results of the asymptotic and numerical analyses are shown to agree well within the limited range of parameters where the asymptotic analysis is valid.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Philosophical Transactions, Series A (ISSN 0080-4614); 306; 1493,; Aug. 27
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 91
    facet.materialart.
    Unknown
    ADI on staggered mesh - A method for the calculation of compressible convection (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: An alternating direction implicit (ADI) method has been applied to a staggered grid for the computation of convection in a highly stratified fluid. Since artificial viscosity is not needed, subtle effects like the onset of convection can be studied. These computations compare well with the 2-D results by Graham (1975) and also agree with standard Boussinesq results when taken to that limit. Good efficiency has been achieved with a time step hundreds of times larger than the stability limit imposed by the explicit treatment of diffusion and the Courant number is not restricted to be below 1. The Navier-Stokes equation contains cross spatial derivatives which are treated explicitly in most ADI schemes. The destabilizing effect of such a practice on a 2-D model system with second-order spatial derivative terms only was analyzed and found to be not excessive.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Journal of Computational Physics (ISSN 0021-9991); 47; July 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 92
    facet.materialart.
    Unknown
    Minimum silicon wafer thickness for ID wafering (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: An analytical model, based on fracture mechanics analysis, is proposed for estimating the minimum wafer thickness as a function of the diameter requirement for solar cells. The conditions under which the model can be applied are discussed with reference to the critical flaw size, the applied force, and the width of the side support. It is shown that the equivalent cantilever force applied during ID slicing can be estimated from the wafering mechanical yield data. The width of the wafer side support was found to be a significant factor in controlling the minimum allowable wafer thickness during slicing. Wafer side support width requirements were found to increase with decreasing wafer thickness.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Electrochemical Society; vol. 129
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 93
    facet.materialart.
    Unknown
    Cost estimates for flat plate and concentrator collector arrays (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The current module and installation costs for the U.S. National Photovoltaic Program's grid-connected systems are significantly higher than required for economic viability of this alternative. Attention is accordingly given to the prospects for installed module cost reductions in flat plate, linear focus Fresnel concentrator, and point focus Fresnel concentrator candidate systems. Cost projections indicate that all three systems would meet near-term and midterm goals, provided that module costs of $2.80/W(p) and $0.70/W(p), respectively, are met. The point focus Fresnel system emerges as the most viable for the near term.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Japanese Journal of Applied Physics (ISSN 0021-4922); 21; 143-153
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 94
    facet.materialart.
    Unknown
    A high-resolution numerical technique for inviscid gas-dynamic problems with weak solutions (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The shock resolution of Harten's (1982) second-order explicit method for one-dimensional hyperbolic conservation laws is investigated for a two-dimensional gas-dynamic problem. The possible extension to a high resolution implicit method for both one- and two-dimensional problems is also investigated. Applications of Harten's method to the quasi-one-dimensional nozzle problem with two nozzle shapes (divergent and convergent-divergent) and the two-dimensional shock-reflection problem resulted in high shock resolution steady-state numerical solutions.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 95
    facet.materialart.
    Unknown
    Numerical solution of viscous flow in unbounded fluid (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Incompressible viscous flow fields induced by initial vorticity distributions with bounded support or exponential decay in the far field are investigated. A numerical scheme for the solution of the vorticity distribution and the velocity field is presented with special emphasis on the treatment of the boundary data. The efficiency of the scheme is demonstrated. The present method has been applied to the study of the merging and collision of vortex rings.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 96
    facet.materialart.
    Unknown
    Simulation of large turbulent vortex structures with the parabolic Navier-Stokes equations (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The theoretical basis for well posed marching of a Parabolic Navier-Stokes (PNS) computational technique for supersonic flow is discussed and examples given to verify the analysis. It is demonstrated that stable computations can be made even with very small steps in the marching direction. The method is applied to cones at large angle of attack in high Reynolds number, supersonic flow. Streamline trajectories generated from the numerical solutions demonstrate the development of vortex structures of the lee side of the cone. Previously announced in STAR as N83-22551
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 97
    facet.materialart.
    Unknown
    Relaxation solution of the full Euler equations (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A numerical procedure for the relaxation solution of the full steady Euler equations is described. By embedding the Euler system in a second order surrogate system, central differencing may be used in subsonic regions while retaining matrix forms well suited to iterative solution procedures and convergence acceleration techniques. Hence, this method allows the development of stable, fully conservative differencing schemes for the solution of quite general inviscid flow problems. Results are presented for both subcritical and shocked supercritical internal flows. Comparisons are made with a standard time dependent solution algorithm. Previously announced in STAR as N82-24859
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 98
    facet.materialart.
    Unknown
    Pointwise and scanning laser anemometer measurements in steady and unsteady separated turbulent boundary layers (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The physical features of steady and unsteady freestream separating turbulent boundary layers that have been determined by pointwise laser anemometer measurements are outlined. It is seen that the large-scale structures control the outer region's backflow behavior. Near the wall, the mean backflow velocity profile for both the steady and unsteady cases is found to scale on the maximum negative mean velocity and its distance from the wall. A description is given of a scanning laser anemometer that produces nearly instantaneous velocity profiles for examing the temporal features of these large-scale structures. Also described is a 'zero-wake' seeder that supplies particles to the outer shear layer and freestream flow with a minimal disturbance.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 99
    facet.materialart.
    Unknown
    The worldwide market for photovoltaics in the rural sector (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Attention is given to the assessment of results obtained by three NASA studies aimed at determining the global market for stand-alone photovoltaic (PV) power systems in the village power, cottage industry, and agricultural applications areas of the rural sector. An attempt was made to identify technical, social, and institutional barriers to PV system implementation, as well as the funding sources available to potential users. Country- and sector-specific results are discussed, and marketing strategies appropriate for each sector are suggested for the benefit of American PV products manufacturers.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 100
    facet.materialart.
    Unknown
    Empirical testing of structural deflection modeling of large photovoltaic modules (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The objective of the structural deflection test was to verify the analytical models used to predict solar cell stress, load-bearing layer stress, and module deflection that result from a uniform pressure load on the module surface. The verification process consisted of measuring module deflection, stress in the solar cell, and stress in the load-bearing member as a functon of normal pressure load, pottant modulus of elasticity, pottant thickness, and cell location. Four glass superstrate modules, two plain wood substrate modules, two ribbed wood substrate modules, and a steel substrate module were tested. Consistent with analysis predictions, all unribbed specimens exhibited nonlinear load vs. deflection characteristics. With the exception of the steel module, test results and analysis predictions for panel deflectons agreed to within 10 percent. A wider variation of agreement was found for stress in the load-bearing members and cells.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...