ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

Ihre E-Mail wurde erfolgreich gesendet. Bitte prüfen Sie Ihren Maileingang.

Leider ist ein Fehler beim E-Mail-Versand aufgetreten. Bitte versuchen Sie es erneut.

Vorgang fortführen?

Exportieren
Filter
  • Chemistry  (12.388)
  • Inorganic Chemistry  (1.101)
  • Engineering  (684)
  • 2005-2009  (54)
  • 1995-1999
  • 1990-1994  (11.193)
  • 1970-1974
  • 1950-1954  (1.822)
  • 1940-1944
  • 1925-1929
  • 2008  (54)
  • 1993  (11.193)
  • 1953  (1.822)
Sammlung
Sprache
Erscheinungszeitraum
  • 2005-2009  (54)
  • 1995-1999
  • 1990-1994  (11.193)
  • 1970-1974
  • 1950-1954  (1.822)
  • +
Jahr
  • 1
    Publikationsdatum: 2021-05-19
    Beschreibung: The anthropogenic affectation was evaluated on the coast N of the Gulf of Batabanó in May 2003 (corresponding to the provinces of Matanzas and Havana), in areas located in the line of the coast. The results were compared with the historical information of the sector. In the coast N and the Ensenada of the Broa, the parameters oxygen saturation, DBO5 and DQO showed characteristic high values of eutrofication. The biggest contribution in the Cianoficies was in the near coastal areas to sources of organic contamination. In the case of the nutrients they show specific data of mesothrofic waters with tendency to the eutrofization and the silts presented a high affectation for toxic metals. The area near to Guanímar is distinguished to present conditions of organic contamination that favor heterothrofic conditions, corroborated by a prevalence of the processes of mineralization of the organic matter over primary production and lows values of fitoplankton concentration. On the contrary, in the region of Surgidero of Batabanó, the processes of synthesis of organic matter prevail suggested by a high primary production, and concentration of fitoplankton, with low breathing levels and mineralization of the organic matter, that indicates that the system is behaving autothrofically. In a general way, this sector is very affected by the anthropogenic impact. The information obtained is of great importance for the development of the fishing and tourist industries in the area.
    Beschreibung: Published
    Schlagwort(e): Phytoplankton ; Water quality ; Primary production ; Chemistry ; Environmental monitoring ; Phytoplankton ; Water quality ; Primary production ; Chemistry ; Environmental monitoring
    Repository-Name: AquaDocs
    Materialart: Proceedings Paper
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 2
    facet.materialart.
    Unbekannt
    Nature Publishing Group (NPG)
    Publikationsdatum: 2008-12-30
    Beschreibung: 〈br /〉〈span class="detail_caption"〉Notes: 〈/span〉Schiermeier, Quirin -- England -- Nature. 2008 Nov 27;456(7221):540-1. doi: 10.1038/nj7221-540a.〈br /〉〈span class="detail_caption"〉Record origin:〈/span〉 〈a href="http://www.ncbi.nlm.nih.gov/pubmed/19112617" target="_blank"〉PubMed〈/a〉
    Schlagwort(e): Animals ; Conservation of Natural Resources/trends ; *Ecosystem ; Employment/statistics & numerical data ; Engineering ; Greenhouse Effect ; Industry/manpower ; Marine Biology/manpower/trends ; Oceanography/education/*manpower/*trends ; Oceans and Seas ; Petroleum ; Physics
    Print ISSN: 0028-0836
    Digitale ISSN: 1476-4687
    Thema: Biologie , Chemie und Pharmazie , Medizin , Allgemeine Naturwissenschaft , Physik
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 3
    facet.materialart.
    Unbekannt
    American Association for the Advancement of Science (AAAS)
    Publikationsdatum: 2008-11-22
    Beschreibung: 〈br /〉〈span class="detail_caption"〉Notes: 〈/span〉Bolon, Craig -- New York, N.Y. -- Science. 2008 Nov 21;322(5905):1187. doi: 10.1126/science.322.5905.1187a.〈br /〉〈span class="detail_caption"〉Record origin:〈/span〉 〈a href="http://www.ncbi.nlm.nih.gov/pubmed/19023062" target="_blank"〉PubMed〈/a〉
    Schlagwort(e): Engineering ; Lawyers ; *Occupations ; Physicians ; Science
    Print ISSN: 0036-8075
    Digitale ISSN: 1095-9203
    Thema: Biologie , Chemie und Pharmazie , Informatik , Medizin , Allgemeine Naturwissenschaft , Physik
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 4
    facet.materialart.
    Unbekannt
    American Association for the Advancement of Science (AAAS)
    Publikationsdatum: 2008-03-29
    Beschreibung: 〈br /〉〈span class="detail_caption"〉Notes: 〈/span〉Travis, John -- New York, N.Y. -- Science. 2008 Mar 28;319(5871):1750-2. doi: 10.1126/science.319.5871.1750.〈br /〉〈span class="detail_caption"〉Record origin:〈/span〉 〈a href="http://www.ncbi.nlm.nih.gov/pubmed/18369115" target="_blank"〉PubMed〈/a〉
    Schlagwort(e): *Awards and Prizes ; *Commerce ; *Diffusion of Innovation ; Drug Industry ; Engineering ; *Internet ; *Problem Solving ; Research ; *Science
    Print ISSN: 0036-8075
    Digitale ISSN: 1095-9203
    Thema: Biologie , Chemie und Pharmazie , Informatik , Medizin , Allgemeine Naturwissenschaft , Physik
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 5
    facet.materialart.
    Unbekannt
    American Association for the Advancement of Science (AAAS)
    Publikationsdatum: 2008-12-06
    Beschreibung: 〈br /〉〈span class="detail_caption"〉Notes: 〈/span〉Alberts, Bruce -- New York, N.Y. -- Science. 2008 Dec 5;322(5907):1435. doi: 10.1126/science.1168790.〈br /〉〈span class="detail_caption"〉Record origin:〈/span〉 〈a href="http://www.ncbi.nlm.nih.gov/pubmed/19056942" target="_blank"〉PubMed〈/a〉
    Schlagwort(e): Engineering ; *Government ; *Public Policy ; *Science ; United States
    Print ISSN: 0036-8075
    Digitale ISSN: 1095-9203
    Thema: Biologie , Chemie und Pharmazie , Informatik , Medizin , Allgemeine Naturwissenschaft , Physik
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 6
    Schlagwort(e): Chemistry ; Chemistry ; Mathematics ; Computer simulation ; Computer software ; Weights and measures
    ISBN: 9781402069451
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 7
    Unbekannt
    Dordrecht : Springer
    Schlagwort(e): Chemistry, Physical organic ; Chemistry, inorganic ; Chemistry ; Mathematics ; Materials ; Mathematics ; Physics
    ISBN: 9781402066603
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 8
    Schlagwort(e): Chemistry ; Chemistry, Organic
    ISBN: 9783211740194
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 9
    Unbekannt
    Berlin, Heidelberg : Springer
    Schlagwort(e): Analytical biochemistry ; Chemistry ; Chemistry, Organic ; Nanotechnology ; Polymers ; Surfaces (Physics)
    ISBN: 9783540783954
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 10
    Unbekannt
    Berlin, Heidelberg : Springer
    Schlagwort(e): Chemistry ; Materials ; Nanotechnology ; Polymers
    ISBN: 9783540693239
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 11
    Unbekannt
    Berlin, Heidelberg : Springer
    Schlagwort(e): Crystallography ; Engineering ; Particles (Nuclear physics) ; Surfaces (Physics)
    Ausgabe: Third Edition
    ISBN: 9783540738862
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 12
    Schlagwort(e): Biochemistry ; Biology ; Data processing ; Biomedical engineering ; Chemistry ; Chemistry, Physical organic ; Materials
    ISBN: 9781402081842
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 13
    Unbekannt
    New York, NY : Springer
    Schlagwort(e): Chemistry ; Chemistry, Physical organic
    ISBN: 9780387494890
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 14
    Unbekannt
    Berlin, Heidelberg : Springer
    Schlagwort(e): Condensed matter ; Engineering ; Nanotechnology
    ISBN: 9783540726753
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 15
    Unbekannt
    Berlin, Heidelberg : Springer
    Schlagwort(e): Engineering ; Optical materials ; Particles (Nuclear physics) ; Physical optics
    ISBN: 9783540745297
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 16
    Unbekannt
    Berlin, Heidelberg : Springer
    Schlagwort(e): Engineering ; Optical materials ; Particles (Nuclear physics) ; Physical optics ; Polymers
    ISBN: 9783540719236
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 17
    Unbekannt
    New York, NY : Springer
    Schlagwort(e): Chemistry ; Science (General)
    ISBN: 9780387758459
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 18
    Unbekannt
    New York, NY : Springer
    Schlagwort(e): Chemical engineering ; Chemistry ; Materials ; Particles (Nuclear physics) ; Superconductivity
    ISBN: 9780387785141
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 19
    Schlagwort(e): Engineering ; Laser physics ; Microwaves ; Optical materials ; Physical optics
    ISBN: 9780387686172
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 20
    Unbekannt
    Boston, MA : Springer
    Schlagwort(e): Chemistry ; Food science
    ISBN: 9780387722504
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 21
    Unbekannt
    Boston, MA : Springer
    Schlagwort(e): Engineering ; Machinery ; Materials
    ISBN: 9780387725284
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 22
    Schlagwort(e): Chemistry ; Food science
    ISBN: 9780387754307
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 23
    Unbekannt
    Boston, MA : Springer US
    Schlagwort(e): Chemistry ; Engineering ; Materials ; Mechanical engineering ; Surfaces (Physics)
    ISBN: 9780387476858
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 24
    Schlagwort(e): Condensed matter ; Engineering ; Optical materials
    ISBN: 9783540734567
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 25
    Schlagwort(e): Engineering ; Optical materials ; Physical optics
    ISBN: 9781402084256
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 26
    Unbekannt
    Berlin, Heidelberg : Springer
    Schlagwort(e): Analytical biochemistry ; Chemistry ; Chemistry, Physical organic ; Engineering
    ISBN: 9783540745983
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 27
    Unbekannt
    Dordrecht : Springer
    Schlagwort(e): Analytical biochemistry ; Chemistry ; Chemistry, Physical organic ; Crystallography ; Molecular structure ; Nanotechnology
    ISBN: 9781402059414
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 28
    Unbekannt
    New York, NY : Springer
    Schlagwort(e): Chemistry ; Chemistry, Physical organic ; Food science
    ISBN: 9780387752846
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 29
    Unbekannt
    Dordrecht : Springer
    Schlagwort(e): Chemistry ; Chemistry, Physical organic ; Chemistry ; Mathematics ; Quantum theory
    ISBN: 9781402085468
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 30
    Unbekannt
    New York, NY : Springer
    Schlagwort(e): Engineering ; Optical materials ; Physical optics
    ISBN: 9780387748016
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 31
    Unbekannt
    Dordrecht : Springer
    Schlagwort(e): Biology ; Data processing ; Chemistry ; Chemistry, Physical organic ; Materials ; Nanotechnology
    ISBN: 9781402081897
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 32
    Schlagwort(e): Engineering ; Materials
    ISBN: 9781402085840
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 33
    Unbekannt
    New York, NY : Springer
    Schlagwort(e): Chemistry ; Food science ; Microbiology
    ISBN: 9780387752136
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 34
    Unbekannt
    New York, NY : Springer
    Schlagwort(e): Biochemical engineering ; Biochemistry ; Biomaterials ; Biotechnology ; Chemistry
    Ausgabe: First
    ISBN: 9780387769219
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 35
    Schlagwort(e): Chemistry ; Chemistry, Physical organic ; Condensed matter ; Quantum theory
    ISBN: 9781402087073
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 36
    Unbekannt
    Berlin, Heidelberg : Springer
    Schlagwort(e): Chemistry ; Particles (Nuclear physics) ; Polymers
    ISBN: 9783540759300
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 37
    Unbekannt
    Berlin, Heidelberg : Springer
    Schlagwort(e): Analytical biochemistry ; Biochemistry ; Chemistry ; Chemistry, Organic ; Chemistry, Physical organic
    ISBN: 9783540490807
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 38
    Unbekannt
    Berlin, Heidelberg : Springer
    Schlagwort(e): Chemistry ; Chemistry, Organic ; Chemistry, Physical organic
    ISBN: 9783540778691
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 39
    Unbekannt
    Berlin, Heidelberg : Springer
    Schlagwort(e): Engineering ; Nanotechnology ; Particles (Nuclear physics)
    ISBN: 9783540745570
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 40
    Unbekannt
    Basel : Birkhäuser
    Schlagwort(e): Biochemistry ; Chemistry ; Chemistry, Organic ; Human physiology ; Plant physiology
    ISBN: 9783764374990
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 41
    Unbekannt
    Dordrecht : Springer
    Schlagwort(e): Chemistry ; Engineering ; Magnetism ; Materials ; Optical materials
    ISBN: 9781402087967
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 42
    Unbekannt
    Dordrecht : Springer
    Schlagwort(e): Condensed matter ; Engineering ; Materials ; Nanotechnology ; Optical materials
    ISBN: 9781402089039
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 43
    Unbekannt
    Berlin, Heidelberg : Springer
    Schlagwort(e): Electronics ; Engineering ; Optical materials ; Physical optics
    ISBN: 9783540718925
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 44
    Schlagwort(e): Electronics ; Engineering ; Nanotechnology ; Thermodynamics
    ISBN: 9783540736073
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 45
    Schlagwort(e): Chemistry ; Chemistry, Physical organic ; Chemistry ; Mathematics
    ISBN: 9783540773047
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 46
    Unbekannt
    Boston, MA : Springer US
    Schlagwort(e): Chemistry ; Chemistry, inorganic ; Nanotechnology ; Surfaces (Physics)
    ISBN: 9780387787015
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 47
    Unbekannt
    New York, NY : Springer
    Schlagwort(e): Biotechnology ; Chemistry ; Food science
    ISBN: 9780387793825
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 48
    Schlagwort(e): Computer science ; Engineering ; Materials ; Nuclear engineering ; Thermodynamics
    ISBN: 9781402084225
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 49
    Unbekannt
    New York, NY : Springer
    Schlagwort(e): Chemistry ; Chemistry, Physical organic ; Food science
    ISBN: 9780387719474
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 50
    Unbekannt
    Berlin, Heidelberg : Springer
    Schlagwort(e): Biochemistry ; Chemistry ; Chemistry, Organic
    ISBN: 9783540758136
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 51
    Unbekannt
    Dordrecht : springer
    Schlagwort(e): Biochemistry ; Chemistry ; Chemistry, inorganic
    ISBN: 9781402065002
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 52
    Unbekannt
    Berlin, Heidelberg : Springer
    Schlagwort(e): Chemistry ; Electric engineering ; Materials ; Polymers ; Soft condensed matter
    ISBN: 9783540697572
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 53
    Unbekannt
    Berlin, Heidelberg : Springer
    Schlagwort(e): Chemistry ; Electric engineering ; Materials ; Polymers ; Soft condensed matter
    ISBN: 9783540697657
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 54
    Schlagwort(e): Biochemistry ; Chemistry ; Chemistry, Organic
    ISBN: 9783540758150
    Sprache: Englisch
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 55
    Digitale Medien
    Digitale Medien
    Springer
    Journal of science education and technology 2 (1993), S. 397-406 
    ISSN: 1573-1839
    Schlagwort(e): Engineering ; technological literacy ; hands-on experiments ; active learning ; content instruction ; videotaping
    Quelle: Springer Online Journal Archives 1860-2000
    Thema: Allgemeine Naturwissenschaft , Technik allgemein
    Notizen: Abstract Media reports indicate the decline of the technological literacy of American youth, especially that students in other countries are better prepared in science and mathematics. Our active-learning program, which consists of numerous hands-on experiments, introduces engineering applications into science and math programs, that will demonstrate to students the usefulness of the theory that they currently do not see as useful. The program, when fully developed, will make optimum use of technology, especially computers and videotapes. The hands-on experiments allow students to discover fundamental principles through data analysis and then use the principles to synthesize a solution to a technological problem. This discovery-based education will help school systems better meet performance standards such as those in the Maryland School Performance Plan. The experimental approach to science education is especially important in a technology-oriented economy where children use the new technologies without understanding the principles on which they are based.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 56
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 204 (1993), S. 51-61 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Dielektrizitätskonstante (ε′) nd dielektrischer Verlust (ε″) von drei Carboxymethylcellulose-Proben mit verschiedenem Substitutions- und Polymerisationsgrad wurden im Frequenzbereich 0,1 - 10000kHz bei Temperaturen zwischen 10 und 60oC gemessen. Im Gegensatz zu nativer Baumwollecellulose, die zwei Relaxztionsprozesse (β und γ) zeigt, wurde nur jeweils ein Relaxationsprozeß zwischen 0,1 und 1kHz gefundern. Die dielektrischen Eigenschaften hängen dabei nicht nur vo Substritutionsgrad, sondern auch vom gewichtsmittleren Polymerisationsgrad und der Homogenität der Substitution ab.
    Notizen: The dielectric constant, ε′, and dielectric loss, ε″, were determined for three solid carboxymethyl cellulose samples having different levels of substitution and different degrees of polymerization over a frequency range of 0.1 - 10 000 kHz at temperatures from 10-60°C. In contrast to the two relaxation processes, γ and β, previously observed in native cotton cellulose, only one relaxation process within a frequency range of 0.1 - 1 kHz was identified. It was found that the dielectric properties do not only depend on the degree of substitution, but also on the weight-average degree of polymerization and uniformity of distribution.
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 57
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 204 (1993), S. 63-71 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Es wird ein neues Kapillar-Rheometer beschrieben, bei dem der Druck, mit dem die Meßflüssigkeit durch die Kapillaren gepreßt wird, durch eine hydraulische Vorrichtung erzeugt wird. Das Gerät ist voll zautomatisiert und wird durch einen PC gesteuert. Verschiedene Meß-Moden können vorgewählt und dann automatisch ausgeführt werden. Einige vorläufige Ergebnisse an Newtonschen Flüssigkeiten und an Polymerlösungen zeigen das Funktionieren des neuen Rheometers.
    Notizen: A new capillary rheometer design is described, in which a hydraulic device is used to produce the pressure driving the sample fluid through capillaries. The device is fully automated and controlled by a PC unit. Various measuring modes can be preselected and are automatically executed. Some preliminary results with New tonian fluids and with polymer solutions show the functioning of the new rheometer.
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 58
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 204 (1993), S. 73-83 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Naphthochinonderivate wurden als Elektronen- und Protonenüberträger in Polymermembranen für Redoxreaktionen eingesetzt. Eine solche, Vitamin K1 enthaltende Membran, läßt den Oxidations-Reduktions-Prozeß zwischen zwei wäßrigen Lösungen von Eisen(III) cyanid bzw. Natriumdithionit nur ziemlich langsam ablaufen. Ein effektiverer Überträger war Vitamin K3; die Reaktion verlief zunächst rasch, jedoch beiweideerholten Anwendungen immer langsamer, da ein Teil dieses, in senier reduzierten Form wasserlöslichen Überträgers während der Reaktion aus der Membran herausgelöst wurde. 2-Alkyloxy-1,4-naphthochinone wie z.B. das Hexyloxyderivat erwiesen sich als wirksame, die Reaktion unterstützende Elektronen- und Protonenüberträger, und in diesen Fällen führten wiederholte Anwendungen nicht zu Verzögerungen.
    Notizen: A redox reaction was mediated by polymeric membranes which contain naphthoquinone derivatives as electron and proton carriers. When such a membrane containing vitamin K1 was placed between two aqueous solutions of potassium ferricyanide and sodium dithionite, the oxidation-reduction of them took place, but the reaction was rather slow. Although vitamin K3 was a more effective carrier and the reaction proceeded fast, the reaction rate decreased in the repeated runs. Since the reduced form of this carrier is slightly soluble in water, a part of the carrier got dissolved in the aqueous phase from the membrane during the reaction. 2-Alkyloxy-1,4-naphthoquinones such as 2-hexyloxy-1,4-naphthoquinone effectively transported electrons and protons through the polymeric membranes, promoting the membrane-mediated reaction; in these cases no retardation was observed in the repeated runs.
    Zusätzliches Material: 12 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 59
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: The peroxide-initiated copolymerisation of an unsaturated polyester with zinc acrylate, diallyl phthalate prepolymer and a solid vinyl ester resin was investigated. The curing was followed by means of gelation curves and differential scanning calorimetry. The studies showed that zinc acrylate has the highest reactivity.
    Notizen: Die Peroxid-initiierte Copolymerisation eines ungesättigten Polyesters mnit Zinkacrylat, Diallylphthalat-Prepolymer und einem Vinylesterharz wurde untersucht. Der Härtungsverlauf wurde anhand der Gelierungskurven und mitels Differentialkalorimetrie verfolgt. Die Prüfungen zeigten, daß Zinkacrylat die größte Reaktivität hat.
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 60
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 204 (1993), S. 91-100 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Die Kinetik der isothermen Kristallisation des anionisch hergestellten Copolyamids PA 8/12 aus ω-Octanlactam (OL) und ω-Laurinlactam (12-Dodecanlactam) (LL) wurde nach der Avrami-Gleichung über den gesamten Zusammensetzungsbereich mittels DSC untersucht. Die Kristallisationsparameter Halbwertszeit (t1/2), Avrami-Index (n), Geschwindigkeitskonstante (k) und Kristallinitätsgrad wurden für verschiedene Kristallisationstemperaturen bestimmt. Eine Beziehung dieser Parameter zur Copolyamidzusammensetzung sowie zu Kristallisations- und Unterkühlungstemperaturen wurde untersucht und die Ergebnisse diskutiert. Desweiteren wurden die Werte de hier behandelten mit denen der in der Literaturgeschriebenen Homopolymeren verglichen.
    Notizen: The isothermal crystallization kinetics of the anionic copolyamides of ω-octanelactam (OL) with ω-laurolactam (LL) (nylon-8/nylon-12), covering a wide composition range (0/100 - 100/0 OL/LL, mol/mol), was established according to the Avrami equation by the use of differential scanning calorimetry. The crystallization parameters half-time crystallization (t1/2), Avrami index (n), rate constant (k), and reduced crystallinity were determined for various crystallization temperatures. These parameter values are correlated to the composition of the copolyamides, the crystallization and supercooling temperature, and the results are discussed.Differences in kinetic parameter values between the homopolymers of this paper and those for the hydrolytic nylon-8 and nylon-12 reported in literature were observed and discussed.
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 61
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 204 (1993), S. 111-118 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Abhängig von den Fällbedingungen tritt Poly(p-phenylen-1,3,4-oxadiazole) in zwei Modifikationen auf. Dies kann sowohl durch FTIR-Spektroskopie als auch mit Röntgenweitwinkelstreuung nachgewiesen werden. In beiden Fällen zeigt jede Modifikation charakteristische Peaks. Bei der Verarbeitung zu Fäden oder Filmen aus Lösungen in konzentrierter Schwefeläure durch Fällen in Wasser wird die im thermodynamischen Ungleichgweicht stehende β-Modifikation erhalten. Unter speziellen Bedingungen ist es möglich, die dreidimensional geordnete Gleichgewichtsstruktur direkt herzustellen. Verarbeitungsprodukte aus dieser α-Modifikation weisen merklich höhere Festigkeiten auf.
    Notizen: Depending on the coagulation conditions, poly(p-phenylene-1,3,4-oxadiazole) in the solid state forms two modifications, as can be evidenced by FTIR spectroscopy and by wide-angle X-ray scattering curves (WAXS). In both cases each modification is detectable by characteristic peaks. Processing of fibers or films from solutions in concentrated sulfuric acid by coagulation in water results in the formation of a thermodynamically non-equilibrium form, defined as β-modification. Under special conditions it is possible to obtain the three-dimensionally ordered equilibrium α-structure that leads to processing products with markedly higher tenacities.
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 62
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 204 (1993), S. 101-110 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: By a new technique for the addition of monomers it is possible to increase the reproducibility of the synthesis of poly(1,4-phenylene-1,3,4-oxadiazoles) by one order of magnitude in relation to the known method, measured by the standard deviation of the relative viscosity of polymer solutions in concentrated sulfuric acid. This method leads to polymers with very high molecular weights under markedly milder reaction conditions and in shorter reaction times than by the classic method.The influence of the most important reaction parameters on the reaction rate and equilibrium of the polycondensation was investigated. An [η]/Mw-relation was established based on light-scattering and viscometric investigations of polymer solutions in concentrated sulfuric acid.
    Notizen: Die Reproduzierbarkeit der Synthese von Poly(p-phenylen-1,3,4-oxadiazolen) in Oleum Kann durch eine veränderte Monomerzugabetechnik, gemessen an der Standardabweichung der relativen Lösungsviskosität, um eine Größenordunung verbessert werden. Die Polykondensation verläft unter deutlich milderen Bedingungen in kürzeren Reaktionszeiten zu Polymeren mit höheren Molmassen als nach der bekannten Methode.Der Einfluß verschiedener Parameter auf die Reaktionsgeschwindigkeit und das Polykondensationsgleichgewicht wurde eingehend untersucht. Auf der Basis streulicht photometrischer und viskosimetrischer Messungen an Polymerlösungen in konzentrierter Schwefelsäure wurde eine [η]/Mw-Bezeihung ermittelt.
    Zusätzliches Material: 3 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 63
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 204 (1993), S. 127-137 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Water-borne paints have received greater attention. Existing concepts related to suitable binders are polymethacrylate dispersions crosslinkable by autoxidation. Essential synthesis steps of such dispersions and characteristic properties also of adequate coatings are described.Oil fatty acid structure units are enriched in the shell-region of the dispersed particles and the rest of nearly 30% is localized in the water phase as substituent of a water-soluble copolymer.
    Notizen: Wäßrige Anstrichsysteme setzen sich in zunehmendem Maße durch. Als eine Entwicklungsvariante für diesbezüglich geeignete Bindemittel kommen autoxidativ vernet zende Polymethacfrylatdispersionen in Betracht. Es werden wesentliche Schritte der Synthese derartiger Dispersionen un dcharakteristische Eigenschaften auchvon Beschichtungen vorgestellt.Die Ölfettsäurestruktureinheiten sind im Schalenbereich der disperigierten Teilchen angereichert, und sie befinden sich außerden zu etwa 30% in der wäßrigen Phase als Substituenten eines löslichen Copolymeren.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 64
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 204 (1993), S. 153-159 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Ein hochvernetztes duroplastisches Epoxidharz wurde durch “reactive blending” in Gegenwart von Bisphenol A-Polycarbonat (PC) modifiziert. FTIR-Untersuchungen zeigten, daß der Umsatz nach dem Härtungs- und Nachhärtungsprozeß durch den PC-Anteil im Blend erniedrigt wird. Darüber hinaus wurde beobachtet, daß Bruch festigkeit des Blendsystems mit wachsendem PC-Gehalt merklich steigt. Für die Phasentrennung der Unterschußkomponente während der Vernetzung wurden keine Beweise gefunden.
    Notizen: A highly crosslinked thermosetting epoxy resin was modified by a reactive blending process carried out in the presence of bisphenol-A polycarbonate (PC). FTIR spectroscopy investigations demonstrated that the presence of PC in the blend decreases the reactants conversion after the curing and postcuring processes. Moreover, it was found that the fracture toughness of this blend system increases markedly by increasing the PC content in the blend. No evidence of phase separation of the minor component during the crosslinking reaction steps was observed.
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 65
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 204 (1993), S. 119-125 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Die antibakterielle Wirkung von Homopolymeren von Cetyldimethyl(4-vinylbenzyl)ammoniumchlorid (VB16), Lauryldimethyl(4-vinylbenzyl) ammoniumchlorid (VB12) und TRimethyl(4-vinylbenzyl)ammoniumchlorid (VB1) und deren Copolymeren mit Acrylnitril wurde untersucht. Alle Homo- und Copolymeren wirkten bei den getesteten Bakterienarten-B. subtilis, S. aureus, E. coli und P. aeruginosa - keimtötend. Besondrs stake Effekte zeigten sich bei gram-positiven B.-subtilis- und S.-aureus-Kulturen. Die keimtötende Wirkung nahim in der Reihe VB16 〉 VB12 ≫ VB1 ab.
    Notizen: Homopolymers of cetyldimethyl(4-vinylbenzyl)ammonium chloride (VB16), lauryl-dimethyl(4-vinylbenzyl)ammonium chloride (VB12), and trimethyl (4-vinylbenzyl)ammonium chloride (VB1), and copolymers of these compounds with acrylonitrile were examined for antibacterial activity using B. subtilis, S. aureus, E. coli, and P. aeruginosa. All homopolymers and copolymers showed germicidal action to the bacterias, especially strong action to gram-positive B. subtilis and S. aureus. The strength of the germicidal action of the quaternary ammonium branches was in the order: VB16 〉 VB12 ≫ VB1.
    Zusätzliches Material: 3 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 66
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 204 (1993), S. 161-175 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: The permeability of gases in films and membranes of thermoplastic starch (TPS) was investigated. The permeability- and diffusion coefficients were measured with the time-lag method on films on TPS with different plasticizer contents and at different temperatures. The experimentally determined low permeabilities were comparable to those of synthetic polymers available on the market. TPS shows at low water activities permeabilities similar to good gasbarrier materials. With increasing water content - as it is already shown for other hydrophilic polymers - the gasbarrier property of TPS gets lost. Together with earlier works on the structure and the thermodynamical behaviour of the starch, the molecular parameters and their influence on the permeability were discussed.
    Notizen: Als Alternative zu den heutigen Massenkunststoffen wurde die Möglichkeit eines Einsatzes von thermoplastischer Stärke (TPS) als Barrierewerkstoff in Filmen und Membranen untersucht. Die Permeations- und Diffusionskoeffizienten wurden mitels der Induktionszeit-Methode an Filmen aus TPS in Abhängigkeit von Temperatur und Weichmachergehalt ermitelt. Die expermentell gefundence gute Gasbarriereeigen schaft der Stärke gegenüber Sauerstoff und Stickstoff wurde durch vergleichende Messungen an Handelsprodukten ergänzt. Die TPS zeigt bei nieedrigen Wassergehalten denhandelsüblichen Barrierepolymeren vergleichbare Gaspermeationsraten. Mit steigen dem Wassergehalt verliert sie- wie die meisten hydrophilen Polymere - ihre Gasbarrierewirkung.Gemeinsam mit früheren Arbeiten über die Struktur und die Eigenschaften von thermoplastischer Stärke wurden die molekularen Parameter und ihr Einfluß auf die Gasdurchlässigkeit diskutiert.
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 67
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 204 (1993), S. 139-152 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Durch Phasengrenzflächenpolykondensation von 4,4'-Bis(mercaptomethyl)biphenyl mit ausgewählten aliphatischen und isomeren Phthalsäuredichloriden wurden neue Polythioester erhalten.Um die optimalen Bedingungen der Phasengrenzflächenploykondensation zu bestimmen, wurde der Einfluß folgender Faktoren auf die reduzierte Viskosität and die Ausbeute der Polythioester ermittelt: Art der organischen Phase, Konzentration der Reagenzien. Verhältnis der wässeigen zur organischen Phase, Art und Konzentration des HCI-Akzeptors, Reaktionstemperatur und -zeit. Die Polykondensation von Dithiol mit Adipinisäuredichlorid und Isophthalsäuredichlorid wurde als Modellsystem genauer untersucht. Die Polythioesterstrukturen wurden mittels Elementaranalyse, IR-Spektroskopie und Röntgenstrukturanalyse bestätigt. Aus der thermogravimetrischen Analyse wurde die Zersetzungstemperatur, der Gewichtsverlust bei dieser Temperatur und das Maximum der Zersetzungsgeschwindigkeit erhalten. Es wurden weiterhin einige physikalisch-chemische, mechanische und dielektrische Eigenschaften ermittelt. Aufgrund der schlechten Löslichkeit der Polythioester konnten die mittleren Molekulargewichte nicht bestimmt werden.
    Notizen: New polythioesters were synthesized by interfacial polycondensation of 4,4'-bis(mercaptomethyl)biphenyl with selected aliphatic and isomeric phthaloyl dichlorides.To determine optimum polycondensation conditions, the influence of the following factors on reduced viscosity and yield were studied: type of organic phase, concentration of reagents, aqueous/organic phase ratio, type and concentration of hydrogen chloride acceptor, rate of acid chloride addition, reaction temperature and reaction time.A thorough examination was carried out only for the polycondensation of dithiol with adipoyl and isophthaloyl dichlorides chosen as a model system. The structures of polythioesters were confirmed by elemental analysis, X-ray analysis and infrared spectroscopy. The temperature of initial decomposition, the percentage of its mass loss, and temperature of the fastest decomposition process from curves of differential and thermogravimetric analysis were determined. Some physicochemical, mechanical and electrical properties were determined. The molecular weights were not measured because of the low solubility of the obtained polythioesters.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 68
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 204 (1993), S. 177-189 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Investigations on chemical coupling of heterogeneous polystyrene-polybutadiene blends were carried out using an organic sulfonylazide. The coupling process was realized in the melt mixing process on a laboratory melt kneader. The efficiency of the coupling agent was evaluated by IR-spectroscopical, microscopical, and dynamic-mechanical analysis and by mechanical properties of the blends. The graft copolymers forming in the melt cause an increase of the stress-strain properties and the impact strength of the blends.
    Notizen: Es wurden Untersuchungen zur chemischen Kopplung heterogener Polystyrol-Polybutadien-Blends bei Einsatz eines organischen Sulfonylazids während des Schmelzemischens im Laborinnenmischer angestellt. Die Wirksamkeit des Kopplungsagens wurde anhand infrarotspektroskopischer, mikroskopischer und dynamisch-mechanischer Analysen sowie anhand des merchanischen Eigenschaftsbildes der Belends beurteilt. Die sich in der Schmelze bildenden Pfropfcopolymeren führen zu einer Erhöhung der Phasenwechselwirkungen un dami zu einer Verbesserung der Festigkeits- und Zähigkeits-eigenschaften der Blends.
    Zusätzliches Material: 7 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 69
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 205 (1993), S. 19-30 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Interpenetrating polymer networks (IPN) were obtained by the simultaneous crosslinking of unsaturated polyester resins and Bisphenol A dicyanate. The copolymerization of the unsaturated polyester with styrene occurred according to the radical mechanism, whereas Bisphenol A dicyanate underwent a cyclotrimerization, thus forming a polytriazine (polycyanurate) network. The IPNs are characterized by elevated glass transition temperature and increased mechanical strength in comparison with corresponding unsaturated polyester resin without Bisphenol A dicyanate.
    Notizen: Interpenetrierende Polymernetzwerke (IPN) wurden durch die gleichzeitige Vernetzung ungesättigter Polyesterharze und Dian-Dicyanat erhalten. Die Copolymerisation von ungesättigtem Polyester mit Styrol erfolgte nach dem radikalischen Mechanismus, während das Dian-Dicyanat cyclotrimerisierte, wodurch sich ein Polytriazin(Polycyanurant)- Netzwerk bildete. Die IPN zeichnen sich durch erhöhte Glastemperatur und mechanische Festigkeit im Vergleich zum entsprechenden ungesättigten Polyesterharz ohne Dian-Dicyanat-Zusatz aus.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 70
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 205 (1993), S. 1-17 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Simultaneous TG/DTA analysis has been used for determination of surface coating of CaCO3-filler with stearic acid (STS) or isopropyl triisostearoyl titanate (titanate). The method has been used for several model samples as well as for commercial fillers with surface coating concentrations of 0-2.7% for stearic acid and 0-4.0% for titanate. A reliable agreement of surface coating concentration of STS determined by simultaneous TG/DTA analysis and C-analysis was achieved if the temperature range of decomposition of the surface-modifying agent was taken into account. This was found for stearic acid between 180 and 450°C (〉1% STS at 500°C) and for titanate between 120 and 450°C (〉 1% titanate at 500°C) from the slopes of the TG- and DTA curves. The mass loss in the range of decomposition is equal to the concentration of surface coating in the case of STS. For titanate-modified fillers an amount of 10% of the mass loss must be added. For determination of surface coating of CaCO3-fillers having higher contents of humidity (〉 0.2%) it is necessary to know this amount, otherwise the STS determination has to be performed by oxidation heat.
    Notizen: Zur Bestimmung des Modifikatorgehaltes von Stearinsäure(STS)-bzw. Isopropyltriisostearyltitanat(Titanat)-modifizierten CaCO3-Füllstoffen wurde die simultane TG/DTA-Analyse genutzt. die Methode wurde für Modellproben sowie für verschiedene kommerzielle Füllstoffe mit einem Konzentrationsbereich von 0 - 2,7% STS bzw. 0 - 4% Titanat angewendet. Eine ausreichende Übereinstimmung der Modifikatorkonzentrationen für STS, bestimmt durch simultane TG/DTA-Analyse sowie eine C-Analyse, wird erreicht, wenn der Zersetzungsbereich des Modifikators berücksichtigt wird. Dieser liegt für Stearinsäurezwischen180°C und 450°C (bei STS 〉 1% bei 500°C) und für Isopropyltriisostearyltitanat zwischen 120 und 450°C (Titanat 〉 1% bei 500°C) und wird aus dem Anstieg der TG-bzw. DTA-Kurve erhalten. Der diesem Zersetzungsbereich zuzuordnende Masseverlust entspricht bei STS-modifizierten Füllstoffen dem Stearinsäuregehalt. Bei Titanat-modifizierten CaCo3-Füllstoffen ist ein Betrag von 10% des Masseverlustes hinzuzufügen. Für die Modifikatorgehaltsbestimmung von CaCo3-Füllstoffen, die einen höheren Feuchtigkeitsgehalt (〈 0,2%) aufweisen, ist die Kenntnis dieser Größe notwendig, anderenfalls ist die STS-Bestimmung über die Oxidationswärme zu realisieren.
    Zusätzliches Material: 9 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 71
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 204 (1993), S. 191-191 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 72
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 205 (1993), S. 31-45 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Die Entfernung von Methylorgane (MO) aus Wasser oder einer Pufferlösung (pH7) durch Adsorption and Reaktionsprodukten von Poly(gylcidylmethacrylat) (PGMA) mit Tetraethylenpentamin oder mit einem Polyethylenimin mit einem Molekulargewicht von 600 (PE1600) wurde untersucht. Das Adsorptionsverhalten läßt sich besser mit der Freundlich-Gleichung als mit der Klotz-Gleichung beschreiben. Adsorptionsgeschwindigkeit und adsorbierte Menge waren in Wasser größer als in der Pufferlösung, in der durch Salzbildung die Adsorption vermindert wird. Die adsorbierte Menge hängt nicht immer von der Menge der an PGMA gebundenen PE1600-Gruppen ab.
    Notizen: A study was made of the removal of methyl orange (MO) solutes in water and in a pH 7 buffer solution by the reaction products of insoluble poly(glycidyl methacrylate) (PGMA) with tetraethylenepentamine (TEP) or polyethylenimine (PEI) having molecular weight of about 600 (PEI600). An examination was made of the adaptability of the Freundlich adsorption formula and the Klotz equation to removal behaviour of these polymers, which was noted to conform better to the Klotz equation than to the Freundlich adsorption formula. The removal rate and the amount removed were greater in water than in a pH 7 buffer solution, and decreased due to coexisting salts. The amount removed does not always depend on the amount of PEI600 groups bound to PGMA.
    Zusätzliches Material: 8 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 73
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 205 (1993), S. 59-74 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Das Zug-Dehnungs-Verhalten von verschiedenen Blends aus Poly(ethylen-co-vinylacetat) (EVA, 28 wt.-% VA-Anteil) und Polyethylen (LDPE) wurde bei unterschiedlichen Dehnungsgeschwindigkeiten und Temperaturen untersucht. Die Zug-Dehungs-Kurven solcher semikristalliner Polymerblends bestehen aus drei Teilen - elastischer oder Hookescher Bereich, Bereich des Aneinanderabgleitens der Ketten sowie Dehnungshärtungsbereich. Eine Verminderung der Dehnungsgeschwindigkeit bewirkt eine Vergrößerung des Dehnungshärtungsbereiches. Die Erhöhung der Meßtemperatur beeinflußt der Dehnungshärtung bei erhöhten Temperaturen vom Kristallschmelzpunkt der Hauptkomponente des Blends abhängt. Röntgen- und DSC-Untersuchun-gen zeigen, daß die Dehnungshärtung von einer Veränderung der Kristallistruktur in LDPE und LDPE-reichen Blends ausgeht, während sie in EVA und EVA-reichen Blends auf eine induzierte Kristallisation in der amorphen Phase zurückzuführen ist.
    Notizen: Stress-strain behaviour of different blends of poly(ethylene-co-vinyl acetate) (EVA) (28 wt.-% VA content) and low density polyethylene (LDPE) is studied under various strain rates and temperatures. It is found that stress-strain plots of such semicrystalline polymer blends consist of three parts, namely, elastic or Hookeian region, region of chain slippage and region of strain hardening. Decrease in strain rate has an increasing effect on the strain hardening region. Increase in measurement temperature adversely affects the whole stress-strain plot. It is apparent from the study that at an elevated temperature the process of strain hardening is dependent on the crystalline melting point of the major component in the blend. The X-ray and DSC studies reveal that the process of strain hardening is mainly due to a change in internal order of crystallites in LDPE and LDPE-rich blends, whereas in EVA and EVA-rich blends it is due to induced crystallization in the amorphous phase.
    Zusätzliches Material: 12 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 74
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 205 (1993), S. 47-58 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Methylmethacrylat (MMA) mit einem Prepolymergehalt von 6-8% wurde mit unterschiedlichen Anteilen (1-20%) 2-Ethylhexylmethacrylat (EMMA), n-Hexylmethacrylat (HMA), 2-Ethylhexylacrylat (EHA) oder n-Hexylacrylat (HA) copolymerisiert. Aus den erhaltenen Copolymeren wurden Folien hergestellt, an denen der Einfluß der Copolymerstruktur auf Lichtdurchlässigkeit, Dichte und mechanische Eigenschaften ermittelt wurde. zugsfestigkeit and Speichermodul nahmen mit zunehmendem Comonomergehalt ab. Die Dehnung stieg im Fall von MMA/EHA- und MMA/HA-Copolymerfolien mit 15 und 20 Gew.-% Comonomeranteil merklich an. Mittels DMTA wurde die Erweichungstemperatur der Copolymeren bestimmt. Die HDT und die Erweichungstemperatur nahmen unter Biegebelastung mit steigendem Comonomergehalt de Copolymeren ab.
    Notizen: The paper describes the fabrication of cast acrylic sheets by copolymerizing a prepolymer syrup of methyl methacrylate (MMA) with varying amounts (1-20 wt.-%) of 2-ethylhexyl methacrylate (EHMA), n-hexyl methacrylate (HMA), 2-ethylhexyl acrylate (EHA) and n-hexyl acrylate (HA). The effect of structure of copolymer on light transmittance, density and mechanical properties was evaluated. Tensile strength and storage modulus decreased with increasing comonomer content. Strain increased significantly in the case of MMA/EHA and MMA/HA copolymer sheets having 15 and 20 wt.-% of comonomer. Softening temperature of copolymer samples was determined using dynamic mechanical thermal analysis. Heat deflection temperature under flexural load and softening temperature decreased with increasing comonomer content in copolymer.
    Zusätzliches Material: 3 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 75
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 205 (1993), S. 75-90 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Poly[(N-(4-hydroxyphenyl)maleimid)-alt-(p-trimethylsilyl-a-methylstryol)] (a-PHTMMS) und einige N-(4-hydroxyphenyl)maleimid-alt-p-trimethylisilyl-a-methylstyrol-enthaltende Copolymere wurden synthetisiert, um mit Diazonaphtochinonsulfonat neue Resists für den nahen UV-Bereich (DNS) zu entwickeln.Durch die kettenversteifende Wirkung der Maleimid-Gruppe wurde eine hohe thermische Stabilität mit einer Glasübergangstemperatur von 240°C und einer Zersetzungstemperatur von 425°C erreicht. Daraus hergestellte lithographische Biler widerstanden noch bei 250°C thermischer Verformung. Die hergestellten siliciumhaltigen Resists wurden auch als oberste Schicht in zweischichtigen Materialien für die Anwendung in der Mikrolithographie untersucht.
    Notizen: Poly[(N-(4-hydroxyphenyl)maleimide)-alt-(p-trimethylsilyl-α-methylstyrene)] (α-PHTMMS) and several N-(4-hydroxyphenyl)maleimide -alt-p-α-methylstyrene related copolymers were synthesized for novel positive near-UV resists containing diazonaphthoquinone sulfonate (DNS). The chain-stiffening effect of the maleimide group was responsible for high thermal resistance. Thus, a high glass transition temperature of 240°C and thermal decomposition temperature of 425°C were obtained. Lithographic positive images were obtained which resisted thermal deformation at 250°C. The prepared silicon-containing resists were also used as the top imaging layer of a bilayer resist for microlithographic application.
    Zusätzliches Material: 9 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 76
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 205 (1993), S. 91-95 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Die Polymerisation von Styrol in Anwesenheit von Fluoreszenzfarbstoffen, Derivaten des Benzanthrons, wurde untersucht. Die Abhängigkeit der Polymerisationsgeschwindigkeit des Styrols vom Charakter des Farbstoffs wurde ermittelt. Spektrophotometrisch wurde festgestellt, daß 70-80% des Farbstoffs in das Polymere eingebaut werden, ohne daß dies zu einer bedeutenden Veränderung des Molekulargewichts und der Molekulargewichtsverteilung führt.
    Notizen: The polymerization of styrene in the presence of some fluorescent dyes, benzanthrone derivatives, has been investigated. The dependence of the polymerization rate of styrene on the character of the dye was determined. It was found spectrophotometrically that 70 - 80% of the dye reacted in the polymerization, thus the coloured fluorescent polymers were obtained. They are resistant to wet treatment and decolouration by solvent. The incorporation of the dye into the polymer chain does not significantly affect the molecular weight and polydispersity of the coloured polymers.
    Zusätzliches Material: 1 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 77
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 205 (1993), S. 97-106 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Im vorliegenden Beitrag wird über die Veränderungen der dynamischen Moduli und der thermiscen Übergänge von Polyvinylidenfluorid in kompatiblen Blends mit Polymethylmethacrylat und in nicht kompatiblen Blends mit Polystyrol berichtet. Die Wirkung des Sepioliths auf die Kompatibilität dieser Blends wurde untersucht.
    Notizen: This paper reports on a study of dynamic moduli and thermal transitions of poly(vinylidene fluoride) in compatible blends with poly(methylmethacrylate) and in non-compatible blends with polystyrene. The effects of sepiolite on the compatibility of these blends have been studied.
    Zusätzliches Material: 3 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 78
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 205 (1993), S. 107-115 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Die Strahlungsvulkanisation von Naturgummilatex (NRL) mit n-Butylacrylat führt bei daraus hergestellten Filmen zu höheren Zugfestigkeiten. Die Alterungseigenschaften von strahlungsvulkanisiertem Naturgummi (RVNRL) wurden in Gegenwart unterschiedlicher Antioxidantien untersucht. Um für die Filme aus RVNRL geeignete Antioxidantien zu finden, wurde die Gelfraktion mit Xylol in Gegenwart von 1-Gew.-% Antioxidans unter einem Luftstrom extrahiert. Antioxidantien, die während der Extraktion einer durch oxidativen Abbau bedingten Verringerung des Gelanteils entgegenwirken, sind für die Alterungssuntersuchungen mit RVNRL geeignet. Es zeigte sich, daß Tris(nonylphenyl)phosphit (Nonflex TNP) und 2,5-Di-tert-amylhydrochinon (Antage DAH) unter 12 getesteten Antioxidantien am effektivsten waren.
    Notizen: Radiation-vulcanization of natural rubber latex (NRL) with n-butyl acrylate gives a higher tensile strength for films obtained after casting. The ageing properties of radiation-vulcanized natural rubber in the presence of various antioxidants have been investigated. In order to find out suitable antioxidants for radiation-vulcanized natural rubber latex (RVNRL) films, extraction of the gel fraction was carried out in xylene with 1 wt.-% antioxidant and air bubbling. Antioxidants which give less reduction in gel fraction due to oxidative degradation during extraction are effective for ageing tests of RVNRL films. It was found that tris(nonylated phenyl) phosphite (Nonflex TNP) and 2,5-di-tert-amylhydroquinone (Antage DAH), among 12 different antioxidants tested, were the most effective antioxidants for RVNRL films.
    Zusätzliches Material: 3 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 79
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 205 (1993), S. 131-139 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Stearinsäure bzw. Dibutylphthalat wurden als Adhäsionsverbesserer zu mit Calciumcarbonat gefüllten ternären Blends, bestehend aus einem Polyethylen/Poly(strol-co-divinylbenzol)-Interpolymeren und Polypropylen, zugegeben. Daraus wurden nach einem bereits beschriebenen Verfahren poröse Ionenaustauschermembranen (PIEM) hergestelt. Die Adhäsionsverbesserer führen dabei zu einer beträchtlichen Erhöhung des Porendurchmessers, da die Diffusion von Chlorsulfonsäure zu den Calciumcarbonatkörnern und damit die Bildung großer Mengen Kohlendioxid erleichtert wird. Andere PIEM-Eigenschaften werden nicht sigifikant beeinflußt.
    Notizen: The previously described preparation of porous ion-exchange membranes (PIEM's) from the ternary blends of polyethylene interpolymer with poly(styrene-co-divinylbenzene) and polypropylene and calcium carbonate filler has been supplemented with the use of stearic acid and dibutyl phthalate as adhesion promoters. It was noted that both promoters govern the huge increase of pore diameter without any significant disturbances in the other PIEM's properties. The facilitating effect of chlorosulfonic acid diffusion toward calcium carbonate grains and large amounts of carbon dioxide volatilization was concluded. This is the basic point of pore creation to be discussed in this paper.
    Zusätzliches Material: 1 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 80
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Makroporöse Membranen aus Terpolymeren von 2,3-Epoxypropylmethacrylat, N-Vinyl-2-pyrrolidon und Ethylendimethacrylat, wurden durch radikalische Suspensionscopolymerisation hergestellt und danach mit Ammoniak modifiziert. Charakteristische Eigenschaften der Membranen wei Porosität, spezifische Oberfläche, Porengröße, Wasserdurchlässigkeit und mechanische Eigenschaften wurden bestimmt. Ein niedriger Gehalt an N-Vinyl-2-pyrrolidon verbessert die mechanischen Eigenschaften der Membranen. Der Mechanismus der Bildung der makroporösen Struktur und der Heterogenitäten wird diskutiert.
    Notizen: Macroporous membranes based on terpolymers of 2,3-epoxypropylmethacrylate, N-vinyl-2-pyrrolidone, and ethylenedimethacrylate were prepared by radical suspension copolymerization and subsequently modified with ammonia. The membranes were characterized by their porosity, specific surface area, pore size, water permeability and mechanical properties. The low content of N-vinyl-2-pyrrolidone improves the mechanical properties of the membranes. The mechanism of formation of the macroporous structure and heterogeneities is discussed.
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 81
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: The aim of the studies was to characterize the ultrafiltration properties of a variety of photochemically modified membranes, made by a new approach starting with two types of PAN-UF membranes and using nine aromatic azides bearing different more or less hydrophilic or hydrophobic substituents. The influence of the surface functionalization (hydrophilization, introduction of charges/hydrophobization) realized by this means onto the water permeability, the dextrane selectivity, and the permeabilities during and after UF, resp., after simple contact with solutions of ovalbumine and lysozyme was the major subject. Modified membranes made using the aryl azides with hydrophilic groups, 4-azidobenzoic acid, Ib, (4-azidophenyl)trimethylammonium iodide, If, sodium (4-azido)-benzene sulfonate, Id, showed enhanced water fluxes and reduced dextrane retention. All the other azides caused reduced water permeability, enhanced dextrane selectivity, and significant flux reductions as a consequence of contact with ovalbumin solutions (pH = 5.0). The strongest effects were achieved with the two expecially hydrophobic compounds, 2-naphthyl azide, Ih, and 2-naphthoyl azide, IX. On the other hand, a pronounced positive effect of photo-modification on the protein fouling behaviour became evident in the UF of lysozyme (0.05%, pH = 10.5). Using the membranes modified with Id a much higher filtrate flux (Jv = 48.1 l/m2h) was observed as compared with the original PAN membrane (Jv = 13.1 I/m2h). The perspectives and the limitations of the developed modification strategy are discussed.
    Notizen: Nach einem neuartigen Verfahren mit Hilfe von neun, mit verschieden hydrophilen bzw. hydrophoben Substituenten synthetisierten aromatischen Aziden unterschiedlich photochemisch modifizierten Polyacrylnitril-Ultrafiltrations-Membranen wurden in UF-Versuchen charakterisiert. Dabei sollte der Einfluß der so erzielten Oberflächenfunktionalisierungen (Hydrophilierung, Einführung von Ladungen oder Hydrophobierung) auf das Trennverhalten (Wasserdurchläassigkeit und Selektivitäat für Dextrane, Permeabilität während und nach der UF bzw. nach einfachem Kontakt mit Ovalbuminund mit Lysozym-Lösungen) studiert werden. Die Modifizierung mit den Arylaziden, die hydrophile Gruppen enthalten (4-Azidobenzoäure, Ib, (4-Azidophenyl)-tri-methylammoniumiodid, If, Natrium-4-azidobenzolsuflfonat, Id), führt zu einer erhöhten Durchlässigkeit der Membranen für Wasser und Dextrane. Alle anderen Azide, darunter besonders stark die deutlich hydrophoben 2-Naphthoylazid, Ih, und 2-Naphthoylazid, IX, verringern die Wasserpermeabilität, erhöhen das Rückhaltevermögen für Dextrane und verstärken die Effekte der Wechselwirkungen mit Ovalbumin (pH = 5,0). Das wird in Flußreduzierungen verglichen mit der unmodifizierten PAN-UF-Membran sichtbar. Ein positiver Effekt der Photomodifizierung wird besonders deutlich bei der UF von Lyasozym (0,05%, pH = 10,5) mit der mit Id modifizierten Membran (Jv = 48,1 l/m2h) im Vergleich zur Ausgangs-Membran (Jv = 13,1 1/m2h). Die Perspektiven und die Grenzen des Modifizierungsverfahrens werden abschließend diskutiert.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 82
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 210 (1993), S. 197-205 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: For solving specific problems of separation, high demands on membrane materials will be made in relation to thermal stability and resistance in a wide pH-range and against organic solvents. Membranes from poly(p-phenylen-1,3,4-oxadiazole) are prepared by different methods and their separation properties in ultrafiltration are investigated.
    Notizen: Poly(p-phenylen-1,3,4-oxadiazol) (POD) ist aufgrund seiner thermischen Stabilität, pH- und Lösungsmittelbeständigkeit ein interessanter Werkstoff zur Herstellung von Membranen. Die Herstellung von POD-Membranen und deren Trenneigenschaften im Prozeß der Ultrafiltration werden untersucht.
    Zusätzliches Material: 3 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 83
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 211 (1993), S. 79-87 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Ein Poly(sulfidsulfon) wurde durch aktivierte nucleophile Substitution der Nitrogruppen von Bis(4-nitrophenyl)sulfon mit wasserfreiem Natriumsulfid bei 200 C in N-Methyl-2-pyrrolidon (NMP) hergestellt. Das Polymere löst sich in NMP, Dimethylformamid (DMF), Dimethylsulfoxid und anderen hochpolaren Lösungsmitteln. Das Molekulargewicht des Polymeren mit einer inhärenten Viskosität von 15 ml/g bei 30°C in DMF wurde mittels 1H-NMR-Spektroskopie zu Mn = 2500 bestimmt. Die Glastemperatur liegt bei ca. 73°C; der Veraschungsrückstand bei 600°C in Luft beträgt 36%, der Sauerstoffindex (LOI) ca. 37.
    Notizen: A poly(sulfide sulfone) was synthesized by activated nucleophilic displacement reaction between bis(4-nitrophenyl)sulfone and anhydrous sodium sulfide at 200°C in N-methyl-2-pyrrolidone (NMP). The polymer is soluble in NMP, dimethylformamide, dimethylsulfoxide and other highly polar solvents. The molecular weight of the polymer (M̄n = 2.500) having an inherent viscosity of 15 mL/g at 30°C in DMF was determined by 1H-NMR spectroscopy. The polymer has a glass transition at approx. 73°C and char residue of 36% at 600°C in air. The limiting oxygen index of the polymer is ∼37.
    Zusätzliches Material: 5 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 84
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 211 (1993), S. 35-51 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Es wurden Untersuchungen durchgeführt, um ein auf experimentellen Ergebnissen basierendes mathematisches Modell zu entwickeln, welches die Durchmischung und andere Polymerisationsparameter mit der Partikelgröße von PVC korreliert und die Grenzen der Rührgeschwindigkeit in einem definierten Rührersystem festlegt.Dazu wurde eine Computer-Regressionsanalyse von etwa 30 in Reaktoren von 10L bis 27 m3 Volomen durchgeführten Vinylchlorid-Polymerisationen berechnet. Die Partikelgröße (d50) hängt dabei ab von den Polymerisationsparametern Rührerdurchmesser (D), Rührergeschwindigkeit (N), Durchmesser des Reaktorbehälters (T), Flüssigkeitsstand (H1) und Volumen des Reaktorbehälters (V) (NWe = Weber-Zahl): d50 = 4346.8 (N)-0.905 (D)-0.901 (T)-0.514 (H1)-0.131d50/D = 273292.1 NWe-0.51 undNmin = 3049.1 D-1.1 (T/D)-0.113In diesen Gleichungen sind nur die Werte 3049, 1, -0,113, 4346, 8 und 273 292, 1 abhängig von der Zusammensetzung des Polymerisationsgemisches. Wird dieses geändert, müssen diese Variablen anhand von einer oder zweier Polymerisationen im Pilotmaßstab ermittelt werden, um die Beziehungen an die neue Zusammensetzung anzupassen und so eine Übertragung auf einen größeren Reaktor zu ermöglichen.
    Notizen: Studies were carried out to develop a mathematical model based on experimental results to correlate agitation and other polymerization parameters with the particle size of PVC and to specify the limits of agitation speed within the defined agitation system. Computer regression analysis of about 30 vinyl chloride polymerizations in reactors with 10 L to 27 m3 tank volume are carried out. The particle size of PVC (d50) is correlated to various polymerization parameters such as impeller diameter (D), impeller speed (N), reactor tank diameter (T), liquid height (H1) and tank volume (V) (NWe = Weber number): d50 = 4346.8 (N)-0.905 (D)-0.901 (T)-0.514 (H1)-0.131d50/D = 273292.1 NWe-0.51Nmin = 3049.1 D-1.1 (T/D)-0.113In these equations only the values 3049.1, -0.113, 4346.8 and 273 292.1 depend on the recipe. When the recipe is changed these variables must be determined by one or two bench-scale polymerizations to adjust the correlations to the new recipe conditions so that they can be also used for scale-up purposes with the new recipe.
    Zusätzliches Material: 2 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 85
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 211 (1993), S. 61-77 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: 4-Phenyl-4-(2,3-expoxypropyl)benzoate (I) can be cured to thermoset networks with a different degree of order by using isomeric aminophenyl aminobenzoates II to V as curing agents. The formation of intermediates during the curing reaction was studied by means of model compounds. From the reaction of the monoamino-substituted phenylbenzoates VI to IX the reactivities for the primary and the secondary aminoprotons towards epoxide was determined. The kinetic data were used for a stepwise simulation of the curing reaction. Arguments were found that in case of diamines with 4-aminobenzoate structure well ordered intermediates are formed, which crosslink in an early stage of the reaction.
    Notizen: Die Härtung von 4-Phenyl-4-(2,3-epoxypropoxy)benzoat (I) mit den isomeren Aminophenylaminobenzoaten II bis V führt zu unterschiedlich geordneten Epoxidnetzwerken. Die Bildung verschiedener Intemediate während der Härtungsreaktion wurde anhand von Modellverbindungen studiert. Aus der Reaktion der monoamino-substituierten Phenylbenzoate VI bis IX mit Epoxid wurden die Reaktionskostanten für die Addition an das primäre und das sekundäre Wasserstoffatom der Aminogruppen bestimmt. Die kinetischen Daten lassen sich für eine schrittweise Simulation des Härtungsverlaufs verwenden. Es wurden Argumente dafür gefunden, daß sich bei Verwendung der Amine mit 4-Aminobenzoat-Strukturen gut geordnete, schnell vernetzende Intermediate bilden.
    Zusätzliches Material: 5 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 86
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 211 (1993), S. 89-101 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Die diskontinuierliche Polymerisation von Butadien in Hexan bei 45°C mit einem in-situ-aktivierten Ziegler-Katalysator aus Neodymversatat, Ethylaluminiumsesquichlorid und Triisobutylauminium wurde untersucht. Die Polymerisationsgeschwindigkeit wurde durch Dichtemessungen verfolgt. Zur Beschreibung der Polymerisationskinetik bei verschiedenen Katalysatorzusammensetzungen wurde ein mathematisches Modell entwickelt. Bei einem molaren Aluminium/Neodym-Verhältnis über 40 kann mittels Gelpermeationschromatographie eine bimodale Molmassenverteilung beobachtet werden, was zu der Annahme führt, daß im Polymerisationssystem mehr als eine aktive Spezies anwesend ist.
    Notizen: The batch polymerization of butadiene in hexane with an in-situ-activated Ziegler-Catalyst containing neodymium versatate, ethylaluminium sesquichloride and triisobutylaluminium was studied at 45°C. The rate of polymerization was determined by online density measurements. A mathematical model has been developed which is able to describe the kinetics of polymerization at different catalyst ratios. At molar ratios of aluminium/neodymium above 40 a bimodal molar mass distribution can be observed by gel permeation chromatography which leads to the assumption of more than one active species being present in the polymerization system.
    Zusätzliches Material: 8 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 87
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 206 (1993), S. 1-9 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Die Fähigkeit von zwei Polymeren zur Adsorption von Escherichia coli (E. coli) in sterilisierter physiologischer Kochsalzlösung wurde untersucht. Als Polymere wurden die Reaktionsprodukte von unlöslichen Poly(glycidylmethacrylat)-Kügelchen (PGMA) mit Tetraethylenpentamin (TEP) bzw. Polyethylenimin mit einem Molekulargewicht von 60 (PEI600) verwendet. Die Zahl der vermehrungsfähigen Zellen nahm in Gegenwart dieser Polymeren ab. Elektronenmikroskopisch konnte nachgewiesen werden, daß diese Abnahme durch Adsorption der Bakterien auf der Polymeroberfläche verursacht wird. Die Koeffizienten (D) der Abnahme der vermehrungsfähigen Zellen (E. coli) betragen 53 und 62 ml g-1 h-1 für PGMA-TEP bzw. PGMA-PEI600. Sie werden mit den Koeffizienten bereits untersuchter Polymerer verglichen.
    Notizen: A study was made of the removal of Escherichia coli (E. coli) from water by systems based on insoluble poly(glycidyl methacrylate)-g-tetraethylenepentamine and -g-polyethylenimine, i.e., the reaction products of insoluble poly(glycidyl methacrylate) (PGMA) beads with tetraethylenepentamine (TEP) or polyethylenimine having molecular weights of about 600 (PEI600). The polymers (PGMA-TEP and PGMA-PEI600) were brought into contact with E. coli in sterilized physiological saline. These polymers made the viable cell numbers decrease in this medium. It was confirmed by observation of polymer surfaces with a scanning electron microscope that this decrease was caused by adsorption of the bacterial cells onto these polymers. The decrease coefficients of viable cell numbers (D) for E. coli by these polymers were 53 ml g-1 h-1 for PGMA-TEP and 62 ml g-1h-1 for PGMA-PEI600, being compared with D by other polymers studied previously.
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 88
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 206 (1993), S. 11-20 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Die Dehydrochlorierungsgeschwindigkeit von PVC in Gegenwart von Gummisamenöl (RSO), epoxydiertem Gummisamenöl (ERSO) sowie Metallseifen der daraus hergestellten Fettsäuren wurde unter Stickstoff gemessen. Die Anfangsgeschwindigkeiten der Dehydrochlorierung und die Zeit bis zu einem Abbauumsatz von 1% zeigen einen stabilisierenden Effekt der RSO-Derivate mit der Reihenfolge ERSO-Metalseifen 〈 RSO-Metalliseifen 〈 ERSO 〈 RSO.
    Notizen: Dehydrochlorination rates of PVC in nitrogen atmosphere were determined in the presence of rubber seed oil (RSO), epoxidized rubber seed oil (ERSO), barium soap of rubber seed oil fatty acids and barium soap of epoxidized fatty acid of rubber seed oil. The initial rates of dehydrochlorination and the time required for the degradation to attain 1% conversion showed that the rubber seed oil derivatives exert a stabilizing effect on the degradation of PVC. The order of the stabilizing effect was found to be metal soaps of ERSO 〈 metal soaps of RSO 〈 ERSO 〈 RSO.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 89
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 206 (1993), S. 21-38 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: To improve materials performance like the temperature of deformation under flexural load of thermoplastic polyurethanes (TPU) blending with thermoplastics is sensible. A good compatibilization and phase adhesion of thermodynamical incompatible blend-components can be achieved by the use of the right coupling agents. In the case of blends with TPU and PA6 diisocyanate is given into the melt during the extrusion. Through the chemical reactions effects of compatibilization are achieved in the cases of blends with polyesterpolyurethanes and PA6 produced by extrusion and injection moulding and by reactions in solution, too. These could be perceived as consequence of MDI-initiated reactions within the phase boundary layer. The possible reactions with the PA6-phase will be discussed by the use of a model-system made in solution. No effects of compatibilization by MDI could be proved in the polyetherpolyurethan/PA6-system. The chemical characterization of the blends was realized by GPC and FTIR whereas the properties of the morphology are proved with the help of DSC, DMA and transmission electron microscopy (TEM).
    Notizen: Zur Verbesserung der Werkstoffeigenschaften von thermoplastischen Polyurethanen (TPU), wie etwa der Wärmeformbeständigkeit, ist es sinnvoll, ein Blending mit Thermoplasten vorzunehmen. Eine gute Phasenverträglichkeit und Phasenhaftung bei thermodynamisch unverträglichen Blendkomponenten kann durch geeignete reaktive Koppler erreicht werden. Bei den Blends aus TPU and PA6 wird Diisocyanat während der Extrusion in der Schmelze eingebracht. Durch die ablaufenden chemischen Reaktionen werden bei extrudierten und verspritzten Blends und bei aus der Lösung erzeugten Systemen aus Polyesterpolyurethan und PA6 verträglichkeitsverbessernde Wirkungen erreicht. Diese wurden als Folge von mit 4,4′-Diphenylmethandiisocyanat (MDI) initiierten Reaktionen in der Grenzschicht erkannt, wobei die möglichen Reaktionen mit der PA6-Phase anhand eines Modellsystems aus der Lösung diskutiert werden. Bei Blends aus Polyetherpolyurethan und PA6 wurde keine Verträglichkeitsvermittlung durch MDI nachgewiesen. Die chemische Charakterisierung der Blends erfolgte durch GPC und FTIR, während die morphologischen Eigenschaften mittels DSC, DMA und Elektronenmikroskopie dokumentiert wurden.
    Zusätzliches Material: 10 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 90
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 206 (1993), S. 39-52 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Die Reaktion von 4,9-Dioxa-1,12-dodecandiamin (DDDD) mit dem Diglycidylether von Bisphenol A (DGEBA) wurde mittels isothermer und dynamischer Differentialkalorimetrie untersucht. Die Enthalpie der Reaktion einer Epoxygruppe mit einem Amin-Wasserstoff wurde zu 112 ± 5 kJ/mol bestimmt.Die Gültigkeit eines kinetischen Modells wurde bestätigt. Es beinhaltet zwei konkurrierende Mechanismen: zum einen die Katalyse durch Hydroxy-Gruppen, die entweder an die Epoxykette gebunden sind oder während der Reaktion gebildet werden (Aktivierungsenergie 77 ± 5 kJ/mol), zum anderen eine nicht katalysierte Reaktion mit einer höheren Aktivierungsenergie (103 ± 3 kJ/mol).Eine Gelierung beeinflußt die Kinetik der isothermen Härtung nicht. Aus den Gelzeiten wurde die Bruttoaktivierungsenergie ermittelt (62 ± 2 kJ/mol).
    Notizen: The reaction between the diglycidylether of bisphenol A (DGEBA) and 4,9-dioxa-1,12-dodecanediamine (DDDD) has been studied by means of isothermal and dynamic differential scanning calorimetry. The enthalpy of the reaction of an epoxy group with an amino-hydrogen has been determined to be 112 ± 5 kJ/mol. A kinetic model has been validated. It involves two competitive mechanisms: one is catalysed by the hydroxy groups initially present on the epoxy chain or generated during the reaction (activation energy 77 ± 5 kJ/mol), the other is not catalysed with a higher activation energy (103 ± 3 kJ/mol).For each isothermal curing, the kinetics are not modified by gelation. Evaluated from the gel times, the overall activation energy of the reaction is equal to 62 ± 2 kJ/mol.
    Zusätzliches Material: 8 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 91
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 206 (1993), S. 63-68 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Durch Grenzflächen-Polykondensation von N,N′-bis(4-hydroxyphenyl)pyromellitsäurediimid mit Dichloriden verschiedener Phosphoramide wurden flammhemmende Polymere erhalten. Diese wurden mittels IR- und 1H-NMR-Spektroskopie und Elementaranalyse charakterisiert. Thermische Stabilität und Entflammbarkeit wurden thermogravimetrisch bzw. durch Bestimmung des Sauerstoff-Indexes untersucht.
    Notizen: Flame-retardant poly(pyromellitic imide aryl phosphoramide-ester)s were synthesized by interfacial polycondensation of N,N′-bis(p-hydroxyphenyl)pyromellitic diimide with aryl phosphoramidic dichlorides. The polymers were characterized by IR and 1H-NMR spectroscopy. The molecular composition was confirmed by elemental analysis. The thermal stability and flammability of the polymers were studied by thermogravimetry and limiting oxygen index, respectively.
    Zusätzliches Material: 3 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 92
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Der Einfluß von Zusammensetzung und chemischer Struktur auf die thermischen Eigenschaften von Polyimiden aus handelsüblichen Allyl-„Nadimid“-Harzen und Phosphor enthaltenden “Nadimid”-Harzen wurde untersucht. Thermogravimetrische Messungen unter Stickstoff an Harzen, die 1 h bei 300 gehärtet wurden, ergaben eine Erhöhung der thermischen Stabilität.
    Notizen: The effect of composition and chemical structure of addition polyimides on thermal characteristics was investigated using commercially available allyl nadic-imide resins and phosphorus-containing nadimide resins. Thermogravimetric analysis, in N2 atmosphere, of resins cured at 300°C for 1 h revealed improvement of thermal stability.
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 93
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Polyethylenglykol-Makromonomere mit Methacryloyl-Endgruppen wurden in Gegenwart von 2,2′-Azo(N,N′-dimethylenisobutyramidin) in einem Ethanol/Wasser-Gemisch (4:1, v/v) bei verschiedenen Temperaturen mit Styrol copolymerisiert. Die Gesamtaktivierungsenergie dieser Dispersionscopolymerisation beträgt 48 kJ/mol.
    Notizen: Copolymerization of poly(ethylene glycol) macromonomers with terminal meth-acryloyl groups with styrene was carried out in the presence of 2,2′-azobis(N,N′-dimethyleneisobutyramidine) in ethanol/water mixture (4:1, v/v) at various temperatures. The overall activation energy for the dispersion copolymerization was obtained as 48 kJ/mol.
    Zusätzliches Material: 3 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 94
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 212 (1993), S. 147-155 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Magnetische Zellulosepartikel wurden aus Viskose und Eisenpulver mit einer den thermischen Sol-Gel-Übergang nutzenden Suspensionsmethode hergestellt. Die so erhaltenen Teilchen konnen mit einem von außen angelegten, rotierenden Magnetfeld eines üblichen Permanentmagneten durchmischt werden. Die Abtrennung der Partikel von der Reaktionssuspension sollte in einer dünnen Schicht des Materials durch ein starkes Magnetfeld erfolgen. Magnetische Zellulosepartikel, die mit einer SmCoFe-Legierung anstelle des Ferrits hergestellt wurden, besitzen bessere magnetische Eigenschaften.
    Notizen: Mangetic bead cellulose was prepared from viscose and ferrite powder by employing the suspension procedure using the thermal sol-gel transition. The particles thus obtained can be stirred if acted upon by an external rotary magnetic field of a common permanent magnet. Isolation of the particles from reaction suspensions should proceed in a thin layer using a strong magnetic field. Magnetic bead cellulose prepared from supermagnetic powder of the SmCoFe alloy shows a better behaviour in the magnetic field than ferrite materials.
    Zusätzliches Material: 1 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 95
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 212 (1993), S. 103-119 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Unterschiedliche Methoden zur Messung der thermo-oxidativen Stabilität von Polypropylen wurden verglichen. Die Induktionszeiten des oxidativen Abbaus wurden mittels Differentialkalorimetrie (DSC) zwischen 160 und 240°C bis zu 10000 min gemessen. Die gleichen Proben wurden bei 130 bis 160°C 13000 h einer Alterung im Heizofen ausgesetzt.Unterschiedlich stabilisierte Proben ergaben bei dynamischen DSC-Messungen unterschiedliche Ergebnisse. Die Übereinstimmung zwischen dynamischen und statischen Experimenten waren bei kleinen Heizraten am besten.Die Arrhenius-Diagramme der isothermen DSC-Messungen unterscheiden sich von denen der Alterungsversuche; die erhaltenen Geraden schneiden sich entweder in der Nähe der Polypropylen-Schmelzpunkte oder verschieben sich bei den durch Temperung gealterten Proben zu längeren Zeiten. Die scheinbaren Aktivierungsenergien aus den Ofen-Temperungsmessungen sind sehr vie1 niedriger als die aus den DSC-Messungen berechneten und liegen bei allen Proben in einem einheitlichen Bereich, während bei den DSC-Experimenten ein Einfluß des Stabilisators zu erkennen ist.Die thermische Stabilität von Polypropylen wird auch von Antistatika und Farbpigmenten beeinflufßt. Besonders Rot-Pigment wirkt als Stabilisator für Polypropylen, was aus den Ofen-Alterungsversuchen hervorgeht; es verliert diesen Effekt aber bei höheren Temperaturen.
    Notizen: The correlation between different methods of measuring thermo-oxidative stability of polypropylene has been studied. The oxidation induction times were measured using differential scanning calorimetry (DSC) in the temperature range from 160°C to 240°C up to 10000 min. The same samples were oven-aged in the temperature range from 130°C to 160°C up to 13000 h.The dynamic experiments performed by DSC show different results for differently stabilized samples. At slow heating rates the results of the dynamic experiments corresponded best to the results of the isothermal experiments.The straight-line Arrhenius plots of the isothermal DSC measurements do not correlate with the straight-line Arrhenius plots of the oven-aging tests. The Arrhenius plots obtained by these two methods either intersect close to the melting temperature of polypropylene or show jumps towards longer times when switching from DSC to oven-aging. It was found that the apparent activation energies obtained from the oven-aging tests are much lower than these obtained by DSC measurements. Almost the same activation energies were obtained for all the samples in oven-aging, while for the differently stabilized samples the activation energies from DSC measurements showed different results.Antistatic additives and colour pigments influence the thermal stability of polypropylene. Especially red pigment acts like a stabilizer for polypropylene, which is noticed at oven-aging testing, but at higher temperatures it loses this stabilizing effect.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 96
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 212 (1993), S. 201-202 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 97
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 207 (1993), S. 31-41 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Aktiviertes Aluminiumoxid wurde mit den Produkten der Reaktionen von chlormethyliertem Polystyrol mit Diethylamin, von Poly(styro1-co-chlormethylstyrol) mit Diethanolamin und von Poly(styro1-co-glycidylmethacrylat) mit Diethanolamin belegt und zur Adsorption von Escherichia-coli-Bakterien aus Wasser eingesetzt. 100 mg belegtes Trägermaterial wurden mit einer E.-coli-Suspension (20 ml, 107-8 Zellen/ml) gerührt, wobei die Zahl der lebensfähigen Zellen durch Adsorption abnahm; das Adsorptionsgleichgewicht wurde nach etwa 2 h erreicht. Der Abnahme-Koeffizient D (entspricht der Adsorptionsgeschwindigkeitskonstante) wurde aus der Abnahme der Zahl der lebensfähigen Zellen nach 2 h Adsorption gemessen.
    Notizen: Reaction products of soluble chloromethylated polystyrene with diethylamine, poly(styrene-co-chloromethylstyrene) with diethanolamine, and poly(styrene-co-glycidyl methacrylate) with diethanolamine were prepared and supported on activated alumina granules. A study was made of removal of Escherichia coli cells from water by these supported alumina granules. When these granules (0.100 g) were stirred in a viable cell suspension (107-8 cells/ml, 20 ml), the viable cell number decreased by the adsorption of the cells to the granules. The adsorption attained approximately to the equilibrium (saturated adsorption) after about 2 h from the start of the adsorption. The decrease coefficient (D, which corresponds to the adsorption rate constant) was determined from the decrease in the viable cell number in the adsorption for about 2 h from the start.
    Zusätzliches Material: 3 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 98
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 207 (1993), S. 43-52 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Die radikalische Polymerisation von Bisphenol-S enthaltenden Mono- und Dimethacrylsaureestern (BPS-M und BPS-DM) wurde bezüglich Polymerisationsgeschwindigkeit, Läsungsmitteleinfluß, Copolymerisation und Kinetik der Photovernetzung untersucht. Es zeigte sich, daß das Lösungsmittel die Polymerisationsgeschwindigkeit signifikant beeinflußt; polare Lösungsmittel wie DMSO und Acetonitril verlangsamen die Polymerisationsgeschwindigkeit. Die Copolymerisation von BPS-M (M1) mit MMA (M1) wurde in Aceton bei 60°C untersucht. Die Copolymerisationsparameter wurden nach der Fineman-Ross-Methode zu r1 = 3,72 ± 0,0l und r2 = 0,80 ± 0,0l berechnet. Die hohe Reaktivität von BPS-M in diesem Copolymerisationssystem kann vermutlich dem „Matrix-Effekt“ zugeschrieben werden. Funktionelle Polymere mit Methacrylat- Seitengruppen wurden erfolgreich modifiziert und durch Bestrahlung in Gegenwart von Benzoinisopropylether photovernetzt. Die Kinetik der Photovernetzung ist zweiter Ordnung.
    Notizen: Radical polymerizations of mono- and di-methacrylic esters containing bisphenol-S (BPS-M and BPS-DM) were studied in terms of polymerization rate, solvent effect, copolymerization and kinetic measurements of photocrosslinking. The solvents were found to affect significantly the polymerization rate. Polar solvents such as DMSO and acetonitrile were found to slow down the polymerization rate. Copolymerization of BPS-M(M1) with MMA(M2) was studied in acetone at 60°C. The monomer reactivity ratios were calculated to be r1 = 3.72 ± 0.01 and r2 = 0.80 ± 0.01 by the Fineman-Ross method. The high reactivity of BPS-M observed in this copolymerization system may be due to the “matrix effect”. Functional polymers containing methacrylate side-groups were successfully modified and photocrosslinked by irradiation in the presence of benzoin isopropyl ether. The photocrosslinking process is found to be of second order kinetics.
    Zusätzliches Material: 3 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 99
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Die Reaktion von Chlorsilanen (Me3SiCl, R2SiCl2, SiCl4; R=Me, Ph) mit MgCl2 · 6 H2O wurde bezüglich der Entfernung des Kristallwassers untersucht. Die Dehydratisierungsgeschwindigkeit hängt von der Art des Chlorsilans ab. Bei der Reaktion mit Dichlordiphenylsilan entsteht in hoher Ausbeute ungelöstes, wasserfreies Magnesiumchlorid, das als Trägermaterial für die Herstellung eines Titan-Katalysators verwendet wurde. Dieser zeigt mit Et3Al und Ph2Si(OMe), als Cokatalysatoren eine hohe Aktivität für die Propylenpolymerisation.
    Notizen: Reaction of chlorosilanes (Me3SiCl, R2SiCl2, SiCl4; R=Me, Ph) with MgCl2 · 6 H2O were investigated for the efficiency of removal of water. The nature of chlorosilane is found to govern the rate of dehydration. The treatment of hydrated magnesium chloride with dichlorodiphenylsilane gives unsolvated anhydrous magnesium chloride in high yields. Anhydrous MgCl2 is used as support for the preparation of titanium catalyst. The catalyst in conjunction with Et3Al and Ph2Si(OMe)2 as cocatalyst system shows high activity for propylene polymerization.
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 100
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 207 (1993), S. 65-79 
    ISSN: 0003-3146
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Physik
    Beschreibung / Inhaltsverzeichnis: Es wird die Synthese verschiedener, mindestens bifunktioneller Azoverbindungen und deren Einbau in eine Polymerhauptkette mittels Grenzflächenpolykondensation beschrieben. Die thermischen und photochemischen Eigenschaften von Modellverbindungen sowie der Polymeren wurden durch UV-Spektroskopie und DSC-Messungen untersucht. Mit Hilfe von Viskositätsmessungen wurde der Kettenabbau eines Azopolymeren nachgewiesen.
    Notizen: The synthesis of new, unsymmetrically functionalized azo compounds and their incorporation into polymers is described. Their photochemical decomposition and thermal stability was studied by UV spectroscopy and differential scanning calorimetry (DSC), respectively. Chemical degradation was followed by viscosity measurements.
    Zusätzliches Material: 5 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
Schließen ⊗
Diese Webseite nutzt Cookies und das Analyse-Tool Matomo. Weitere Informationen finden Sie hier...