ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • General Chemistry  (4,266)
  • Cell & Developmental Biology  (1,276)
  • STRUCTURAL MECHANICS  (1,141)
  • ENERGY PRODUCTION AND CONVERSION
  • 1980-1984  (2,568)
  • 1970-1974  (4,616)
  • 1915-1919
  • 1982  (2,568)
  • 1973  (1,449)
  • 1972  (1,489)
  • 1971  (1,678)
Collection
Keywords
Publisher
Years
  • 1980-1984  (2,568)
  • 1970-1974  (4,616)
  • 1915-1919
Year
  • 1
    facet.materialart.
    Unknown
    On the cause of the flat-spot phenomenon observed in silicon solar cells at low temperatures and low intensities (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A model that explains the flat-spot power loss phenomenon is presented. Evidence suggests that the effect is due to localized metallurgical interactions between the silicon substrate and the contact metallization. These reactions are shown to result in localized regions in which the P-N junction is destroyed and replaced with a metal semiconductor-like interface. The effects of thermal treatment, crystallographic orientation, junction depth, and metallization are shown along with a method of preventing the effect through the suppression of vacancy formation at the free surface of the contact metallization. Data indicating the effectiveness of a TiN diffusion barrier in preventing the effect are also given.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p 65-70
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 2
    facet.materialart.
    Unknown
    Space shuttle solid rocket booster water entry cavity collapse loads (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Solid rocket booster cavity collapse flight measurements included external pressures on the motor case and aft skirt, internal motor case pressures, accelerometers located in the forward skirt, mid-body area, and aft skirt, as well as strain gages located on the skin of the motor case. This flight data yielded applied pressure longitudinal and circumferential distributions which compare well with model test predictions. The internal motor case ullage pressure, which is below atmospheric due to the rapid cooling of the hot internal gas, was more severe (lower) than anticipated due to the ullage gas being hotter than predicted. The structural dynamic response characteristics were as expected. Structural ring and wall damage are detailed and are considered to be attributable to the direct application of cavity collapse pressure combined with the structurally destabilizing, low internal motor case pressure.
    Keywords: STRUCTURAL MECHANICS
    Type: Shock and Vibration Inform. Center The Shock and Vibration Bull., No. 52. Part 2; p 21-26
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 3
    facet.materialart.
    Unknown
    NASA solar array flight experiment (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The NASA large flexible solar array space shuttle flight experiment is described. The 32 x 4 m wing is deployed from the shuttle bay, and experiments in electrical output, multiple deployment, and structural dynamics are planned. Both 2 x 4 cm and 5.9 x 5.9 cm cell assemblies on the array blanket are evaluated. Safety/hazards provisions are described, including emergency jettison provisions. Ground testing and hardware fabrication are summarized.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p 179-184
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 4
    facet.materialart.
    Unknown
    Large area low-cost space solar cell development (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A development program to produce 5.9 x 5.9 cm space quality silicon solar cells with a cost goal of 30 $/W is described. Cell types investigated include wraparound dielectric, mechanical wraparound and conventional contact configurations with combinations of 2 or 10 ohm/cm resistivity, back surface reflectors and/or fields, and diffused or ion implanted junctions. A single step process to cut cell and cover glass simultaneously is being developed. Results for cell and array tests are given. Large solar arrays that might use cells of this type are discussed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p 23-26
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 5
    facet.materialart.
    Unknown
    The swing to concentrator arrays (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Objectives and progress in both low concentration ratio (6 to 10) and high concentration ratio ( 100) array developments are summarized. Problems encountered include: thermal control, maldistribution of concentrated sunlight, current busing, and optical surface degradation. The potential advantages over planar arrays are an order of magnitude reduction in per unit cost of power plus increased immunity to radiation damage.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p xix-xxiv
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 6
    facet.materialart.
    Unknown
    A study of component design loads due to dynamic environment (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The random vibration of the components of the space shuttle causing internal cargo bay acoustic impingement on the payload was investigated. The import factors to be considered in the design of acoustically loaded structures are the prediction of acoustic environment, prediction of structural response to this environment, and to determine the effect of the response on the structural strength requirements. Two basic responses were analyzed. The primary structure response due to random vibration is first analyzed. The output of primary structure response is used as an input to the secondary structure to calculate the component response.
    Keywords: STRUCTURAL MECHANICS
    Type: Alabama Univ. in Huntsville The 1981 NASA(ASEE Summer Fac. Fellowship Program; 12 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 7
    facet.materialart.
    Unknown
    Surface contour of a biaxially strained, doubly curved antenna reflective mesh (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The elastic membrane equations which describe the deflection of a biaxially tensioned reflective mesh from an idealized surface were developed and solved. The conditions of equilibrium of the forces acting on a membrane element furnish equations which may be used to solve a variety of problems. Configurations considered include continuous, as well as incremental mesh attachment to structural members to form shapes which are approximately parabolic or spherical.
    Keywords: STRUCTURAL MECHANICS
    Type: Alabama Univ. in Huntsville The 1981 NASA(ASEE summer Fac. Fellowship Program; 11 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 8
    facet.materialart.
    Unknown
    Determination of optimum sunlight concentration level in space for 3-5 cascade solar cells (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Current-voltage curves were calculated for each cell in a cascade structure using a solar cell diode equation and superposition. Terms for the light generated current, diffusion current, space charge recombination current and series and shunt resistance are included. Individual current voltage curves are added in series with ohmic resistance losses for the cell interconnects to obtain the cascade cell performance. Temperature was varied with concentration, using several models, and ranged from 55 C at one Sun to between 80 and 200 C at 100 Suns. A variety of series resistance and internal resistances were used. Coefficients of the diffusion and recombination terms are strongly temperature dependent. The study indicates that maximum efficiency (30%) occurs in the 50 to 100X Sun concentration range, provided series resistance is below 0.015 ohm-sq cm and cell temperature is 80 C at 100 Suns.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p 265-270
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 9
    facet.materialart.
    Unknown
    Effects of processing and dopant on radiation damage removal in silicon solar cells (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Gallium and boron doped silicon solar cells, processed by ion implantation followed by either laser or furnace anneal were irradiated by 1 MeV electrons and their postirradiation recovery by thermal annealing was determined. During the postirradiation anneal, gallium doped cells prepared by both processes recovered more rapidly and exhibited none of the severe reverse annealing observed for similarly processed 2 ohm-cm boron doped cells. Ion implanted furnace annealed 0.1 ohm-cm boron doped cells exhibited the lowest post-irradiation annealing temperatures after irradiation. The drastically lowered recovery temperature is attributed to the reduced oxygen and carbon content of the 0.1 ohm-cm cells. Analysis based on defect properties and annealing kinetics indicates that further reduction in annealing temperature is attainable with further reduction in the silicon's carbon and/or divacancy content after irradiation.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: ESA Photovoltaic Generators in Space; p 89-93
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 10
    facet.materialart.
    Unknown
    Design, installation and operating experience of 20 photovoltaic medical refrigerator systems on four continents (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The NASA Lewis Research Center in cooperation with the World Health Organization, U.S.A. I.D., the Pan American Health Organization and national government agencies in some developing countries sponsored the installation of twenty photovoltaic powered medical vaccine storage refrigerator-freezer (R/F) systems. The Solar Power Corporation was selected as the contractor to perform the design, development and installation of these twenty units. Solar Power's experiences are described herein.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 11
    facet.materialart.
    Unknown
    Development of a photovoltaic module qualification test based on combined-environment accelerated stress data (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The U.S. Coast Guard has developed a qualification test to screen photovoltaic modules for utilization on marine aids to navigation. The test is based on a combined-environment of hot and cold saltwater immersion and air pressurization. The test has demonstrated a very high acceleration factor and excellent correlation of electrical failures with modules in a concurrent real-time marine exposure.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 12
    facet.materialart.
    Unknown
    Design principles for high efficiency small-grain polysilicon solar cells, with supporting experimental studies (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Design principles suggested here aim toward high conversion efficiency (greater than 15 percent) in polysilicon cells. The principles seek to decrease the liabilities of both intragranular and grain-boundary-surface defects. The advantages of a phosphorus atom concentration gradient in a thin (less than 50 microns) base of a p(+)/n(x)/n(+) drift-field solar cell, which produces favorable gradients in chemical potential, minority-carrier mobility and diffusivity, and recombination lifetime (via phosphorus gettering) are suggested. The degrading effects of grain boundaries are reduced by these three gradients and by substituting atoms (P, H, F or Li) for vacancies on the grain-boundary surface. From recent experiments comes support for the benefits of P diffusion down grain boundaries and, for quasi-grain-boundary-free and related structures. New analytic solutions for the n(x)-base include the effect of a power-law dependence between P concentration and lifetime. These provide an upper-bound estimate on the open circuit voltage. Finite-difference numerical solutions of the six Shockley equations furnish complete information about all solar-cell parameters and add insight concerning design.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 13
    facet.materialart.
    Unknown
    Residential photovoltaic power conditioning technology for grid connected applications (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Major advances in photovoltaic (PV) Power Conditioning (PC) with respect to performance and low-cost potential have been made. Solutions have been obtained to interface and control problems related to adapting available inverter designs to the grid-connected, residential photovoltaic experiments. A description is presented to contributing research and development activities. Attention is given to aspects of residential systems experience, conceptual design studies, questions of optimum topology development, and promising advanced designs for residential PV provided by development efforts of the private sector.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 14
    facet.materialart.
    Unknown
    Design solutions for the solar cell interconnect fatigue fracture problem (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Mechanical fatigue of solar cell interconnects is a major failure mechanism in photovoltaic arrays. A comprehensive approach to the reliability design of interconnects, together with extensive design data for the fatigue properties of copper interconnects, has been published. This paper extends the previous work, developing failure prediction (fatigue) data for additional interconnect material choices, including aluminum and a variety of copper-Invar and copper-steel claddings. An improved global fatigue function is used to model the probability-of-failure statistics of each material as a function of level and number of cycles of applied strain. Life-cycle economic analyses are used to evaluate the relative merits of each material choce. The copper-Invar clad composites demonstrate superior performance over pure copper. Aluminum results are disappointing.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 15
    facet.materialart.
    Unknown
    Optimal design of high-efficiency tandem cells (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Computer analysis indicates that a substantial increase in solar cell conversion efficiencies can be achieved by using two-cell, multi-bandgap tandem structures instead of single-junction cells. Practical AM1 efficiencies of about 30 percent at one sun and over 30 percent at multiple suns are to be expected. The further increases in efficiency calculated for a three-cell tandem structure are much smaller and may not justify the added complexity. For inexpensive two-cell tandem modules, Si is preferred for the bottom cell, and the top-cell material should have a bandgap of 1.75 to 1.80 eV. The GaAs-AlAs and GaAs-GaP systems are very attractive candidates for the top cell. Significant advances have been achieved in growing GaAs on Ge-coated Si substrates (for the two-terminal, two-cell structure) and in growing free-standing ultrathin GaAs layers (for the two-terminal or four-terminal structures). These advances should be transferable to the GaAs-AlAs and GaAs-GaP systems.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 16
    facet.materialart.
    Unknown
    Characterization of the electrical output of flat-plate photovoltaic arrays (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The electric output of flat-plate photovoltaic arrays changes constantly, due primarily to changes in cell temperature and irradiance level. As a result, array loads such as direct-current to alternating-current power conditioners must be able to accommodate widely varying input levels, while maintaining operation at or near the array maximum power point.The results of an extensive computer simulation study that was used to define the parameters necessary for the systematic design of array/power-conditioner interfaces are presented as normalized ratios of power-conditioner parameters to array parameters, to make the results universally applicable to a wide variety of system sizes, sites, and operating modes. The advantages of maximum power tracking and a technique for computing average annual power-conditioner efficiency are discussed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 17
    facet.materialart.
    Unknown
    Solar cell performance at low illumination and temperature for deep-space applications (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: (Previously cited in issue 12, p. 2037, Accession no. A81-29543)
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 18
    facet.materialart.
    Unknown
    Determination of normal modes from measured complex modes (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A technique is presented for computing a set of normal modes from a set of measured complex modes. The number of elements in the modal vectors, which is equal to the number of measurements, can be larger than the number of modes under consideration. It is also shown that the practice of normal mode approximation to complex modes can lead to very large errors when the modes are too complex. A numerical example and a simulated experiment illustrate the concepts discussed and support the theory presented.
    Keywords: STRUCTURAL MECHANICS
    Type: Shock and Vibration Inform. Center The Shock and Vibration Bull., No. 52. Part 5; p 13-17
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 19
    facet.materialart.
    Unknown
    Required developments in structural dynamics (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The finite element method, modal component synthesis, and the use of fast Fourier transformation were key developments in structural dynamics in the past 15 to 20 years. Current areas requiring additional effort include: (1) the correct calculation of modal shape and natural frequencies for complex structures; (2) the correlation of math models with test data; (3) the establishment of a criteria for "goodness" of the correlation between analysis and test; (4) the selection of the correct displacement functions when using computer programs for modal synthesis; (5) accuracy of response calculations; and (6) the inverse problem of determining the force problem from the response data. Trends identified include the use of distributed computing, greater reliance on analysis, and the possible use of artificial intelligence techniques, or some way of feeding back information, to provide solution guidance to engineers.
    Keywords: STRUCTURAL MECHANICS
    Type: Shock and Vibration Inform. Center The Shock and Vibration Bull., No. 52. Part 1; p 49-54
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 20
    facet.materialart.
    Unknown
    Single crystal growth of upgraded metallurgical silicon by HEM for photovoltaic applications (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Commercially available metallurgical grade (MG) silicon has high B and P content which is not reduced significantly by directional solidification. By choosing high purity raw materials for an experimental Submerged Electrode Arc Furnace, most of the impurities are reduced to 10 ppmw. Directional solidification of upgraded metallurgical grade (UMG) silicon by the Heat Exchanger Method (HEM) has produced 16 cm x 16 cm cross section ingots with nearly single crystal structure. The main problem encountered during directional solidification was SiC impurities dispersed through the structure. Solar cells fabricated from UMG silicon that was directionally solidified twice by HEM have shown up to 12.33% (am1) conversion efficiency.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Silicon Ingot Casting, Phase 3 and Phase 4; 12 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 21
    facet.materialart.
    Unknown
    Origin of SiC impurities in silicon crystals grown from the melt in vacuums (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A main source of high carbon levels in silicon crystals grown from melt under reduced pressures and contained in silica crucibles supported by graphite retainer/susceptor was identified by thermodynamic analysis. The calculations were verified by experimental results and the carbon level is reduced by approximately 50% with the use of molybdenum retainers.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Crystal Systems, Inc. Silicon Ingot Casting, Phase 3 and Phase 4; 5 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 22
    facet.materialart.
    Unknown
    Silicon crystal growth in vacuum (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The most developed process for silicon crystal growth is the Czochralski (CZ) method which was in production for over two decades. In an effort to reduce cost of single crystal silicon for photovoltaic applications, a directional solidification technique, Heat Exchanger Method (HEM), was adapted. Materials used in HEM and CZ furnaces are quite similar (heaters, crucibles, insulation, etc.). To eliminate the cost of high purity argon, it was intended to use vacuum operation in HEM. Two of the major problems encountered in vacuum processing of silicon are crucible decomposition and silicon carbide formation in the melt.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Silicon Ingot Casting, Phase 3 and Phase 4; 4 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 23
    facet.materialart.
    Unknown
    Part 2: Multi-wire slicing. Fixed Abrasive Slicing Technique (FAST) (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The Fixed Abrasive Slicing Techniques (FAST) is a new slicing technique that was developed to slice ingots more effectively. It was demonstrated that 25 wafers/cm can be sliced from 10cm diameter and 19 wafers/cm from 15 cm diameter ingots. Over 99% yield (222 out of a possible 224) was demonstrated during slicing of a 10 cm diameter ingots at 25 wafers/cm. The average thickness of wafers was 0.249 mm and the kerf was 0.151 mm. Slicing rates as high as 0.14 mm/min were also demonstrated for 10 cm diameter ingots.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Silicon Ingot Casting, Phase 3 and Phase 4; 67 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 24
    facet.materialart.
    Unknown
    Silicon slicing by fixed abrasive slicing technique (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: One of the major cost factors in silicon ingot technology adaptation for terrestrial photovoltaic application is in slicing boules into wafers. The most developed industrial practice is the Internal Diameter (ID) slicing. This method utilizes diamond cutting. The diamond stands up for long periods, hence, the cost of expendable materials is low. However, the ID technology as practiced today has poor material utilization. The Multiblade Slurry (MBS) method has low equipment and labor costs but its expendable material costs are high. Recently Multiwire Slurry (MWS) technology has shown very good material utilization, but its expendable material costs are even higher than MBS. The multiwire Fixed Abrasive Slicing Technique (FAST) still in advanced development stage, combines the low expendable material costs of ID method, the low labor and equipment costs of MBS and high material utilization of MWS.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Silicon Ingot Casting, Phase 3 and Phase 4; 3 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 25
    facet.materialart.
    Unknown
    Part 1: Silicon ingot casting. Heat Exchanger Method (HEM) (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Directional solidification by the Heat Exchanger Method (HEM) is a viable approach for directional solidification of silicon ingots used for terrestrial solar cell applications. Some of the significant advances made during this phase of the program were: ingot size, 34 cm x 34 cm x 17 cm - 45 kg, usable material yield - 90%, solar cell efficiency averaged over the whole ingot - 85% of control CZ (35 kg ingot), very uniform resistivity over the boule, and cycle time for 36 kg ingots - 56 hours. Some of the problems encountered were growth rate decrease with increased ingot height, silicon carbide precipitates, and high dislocation density in HEM material. The silicon carbide is attributed to backstreaming of oil vapors from the vacuum pump; the high dislocation density is associated with the thermal history of the boule.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Silicon Ingot Casting, Phase 3 and Phase 4; 111 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 26
    facet.materialart.
    Unknown
    An economic evaluation of solar energy (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The economic advantages of solar dish collectors are evaluated and compared with other energy systems. Labor, inflation and energy deregulation are considered.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Ann. Program Rev., Proc.; p 329-338
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 27
    facet.materialart.
    Unknown
    Potential benefits from a successful solar thermal program (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Solar energy systems were investigated which complement nuclear and coal technologies as a means of reducing the U.S. dependence on imported petroleum. Solar Thermal Energy Systems (STES) represents an important category of solar energy technologies. STES can be utilized in a broad range of applications servicing a variety of economic sectors, and they can be deployed in both near-term and long-term markets. The net present value of the energy cost savings attributable to electric utility and IPH applications of STES were estimated for a variety of future energy cost scenarios and levels of R&D success. This analysis indicated that the expected net benefits of developing an STES option are significantly greater than the expected costs of completing the required R&D. In addition, transportable fuels and chemical feedstocks represent a substantial future potential market for STES. Due to the basic nature of this R&D activity, however, it is currently impossible to estimate the value of STES in these markets. Despite this fact, private investment in STES R&D is not anticipated due to the high level of uncertainty characterizing the expected payoffs.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 295-318
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 28
    facet.materialart.
    Unknown
    Dish Stirling system integration and test progress report (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The integration and check-out of a complete Dish Solar Stirling Thermal Power System is described. The preliminary results of the tests conducted thus far are presented. The results are very encouraging and show promise of high performance and efficiency. The outstanding performance and durability of the 4-95 Stirling engine was the highlight of this 6 month integration and test activity. Exposure to severe heat, dust, sand and wind during the summer months and heavy rains, high winds, including sand storms and freezing cold in recent months did affected the engine or the receiver in any noticable manner.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 191-200
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 29
    facet.materialart.
    Unknown
    Recent tests on the Carter small reciprocating steam engines (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The Jay Carter Enterprises (JCE) Paratransit Vehicle steam engine was tested over a range of conditions which might be experienced by the power converter subsystem of the Small Community Solar Thermal Power Experiment. Some difficulties were encountered getting the engine ready for testing. These difficulties were related to the five year dormancy of the entire system and to incomplete development work that had been going on at the time of cessation of steam engine work at JCE. Other difficulties were related to the fact that the particular expander being tested never ran before and possessed some manufacturing defects. Nevertheless, the engine was operated successfully and results of testing do verify results of computer simulations of the engine in regard to the effect of temperature and power level variations. Engine efficiency was good but generally lower than expected and performance dropped as testing continued. The effect of change in expansion ratio was not demonstrated because of deterioration in engine performance. Post-test inspection revealed numerous correctable defects.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 123-145
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 30
    facet.materialart.
    Unknown
    High-temperature ceramic heat exchanger element for a solar thermal receiver (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A study was performed by AiResearch Manufacturing Company, a division of The Garrett Corporation, on the development a high-temperature ceramic heat exchanger element to be integrated into a solar receiver producing heated air. A number of conceptual designs were developed for heat exchanger elements of differing configuration. These were evaluated with respect to thermal performance, pressure drop, structural integrity, and fabricability. The final design selection identified a finned ceramic shell as the most favorable concept. The shell is surrounded by a larger metallic shell. The flanges of the two shells are sealed to provide a leak-tight pressure vessel. The ceramic shell is to be fabricated by an innovative combination of slip casting the receiver walls and precision casting the heat transfer finned plates. The fins are bonded to the shell during firing. The unit is sized to produce 2150 F ar at 2.7 atm pressure, with a pressure drop of about 2 percent of the inlet pressure. This size is compatible with a solar collector providing a receiver input of 85 kw(th). Fabrication of a one-half scale demonstrator ceramic receiver has been completed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 233-246
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 31
    facet.materialart.
    Unknown
    Modifications and testing of a 4-95 Stirling engine for solar applications (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The modifications and testing of a standard Stirling engine, required for connection to a 25 kW induction alternator, for use with a solar thermal parabolic dish electric module is described. Power was absorbed by a GE induction alternator connected to the utility grid. Also included are the results from recent testing of another solar engine at the DOE-Georgia Tech solar site. It was done in parallel with the testing at Edwards for the purpose of comparing performance of two solar-only receivers, which were based on the standard 4-95 involute heat exchanger.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 179-189
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 32
    facet.materialart.
    Unknown
    Verification testing of the PKI collector at Sandia National Laboratories, Albuquerque, New Mexico (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Verification testing of a solar collector was undertaken prior to its operation as part of an industrial process heat plant at Capitol Concrete Products in Topeka, Kansas. Testing was performed at a control plant installed at Sandia National Laboratory, Albuquerque, New Mexico (SNLA). Early results show that plant performance is even better than anticipated and far in excess of test criteria. Overall plant efficiencies of 65 to 80 percent were typical during hours of good insolation. A number of flaws and imperfections were detected during operability testing, the most important being a problem in elevation drive alignment due to a manufacturing error. All problems were corrected as they occurred and the plant, with over 40 hours of operation, is currently continuing operability testing in a wholly-automatic mode.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 115-118
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 33
    facet.materialart.
    Unknown
    The usage of substructuring analyses in the Get Away Special (GAS) program (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The use of automatic multi-stage substructing analysis is demonstrated for a hypothetical case of a GAS container supported by structural channels with a simulated experimental package inside the container. The GAS program purpose is stated and potential candidate structures to support experimental packages are discussed. The GAS container model and the substructuring analysis capabilities of NASTRAN make it possible to study the experiments inside the container as well as the design constraints resulting from the support structures holding the containers. The use of substructuring in the GAS program could be an important factor in increasing the number of flight opportunities.
    Keywords: STRUCTURAL MECHANICS
    Type: Georgia Univ. 10th NASTRAN User's Colloq.; p 204-215
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 34
    facet.materialart.
    Unknown
    Organic Rankine power conversion subsystem development for the small community solar thermal power system (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The development and preliminary test results for an air-cooled, hermetically sealed 20 kW sub E organic Rankine cycle engine/alternator unit for use with point focussing distributed receiver solar thermal power system. A 750 F toluene is the working fluid and the system features a high speed, single-stage axial flow turbine direct-coupled to a permanent magnet alternator. Good performance was achieved with the unit in preliminary tests.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 101-113
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 35
    facet.materialart.
    Unknown
    A transmittance-optimized, point-focus Fresnel lens solar concentrator (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The development of a point-focus Fresnel lens solar concentrator for high-temperature solar thermal energy system applications is discussed. The concentrator utilizes a transmittance-optimized, short-focal-length, dome-shaped refractive Fresnel lens as the optical element. This concentrator combines both good optical performance and a large tolerance for manufacturing, deflection, and tracking errors. The conceptual design of an 11-meter diameter concentrator which should provide an overall collector efficiency of about 70% at an 815 C (1500 F) receiver operating temperature and a 1500X geometric concentration ratio (lens aperture area/receiver aperture area) was completed. Results of optical and thermal analyses of the collector, a discussion of manufacturing methods for making the large lens, and an update on the current status and future plans of the development program are included.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 35-47
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 36
    facet.materialart.
    Unknown
    Lightning protection of wind turbines (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Possible damages to wind turbine components due to lightning strikes are discussed and means to prevent the damage are presented. A low resistance path to the ground is noted to be essential for any turbine system, including metal paths on nonmetal blades to conduct the strike. Surge arrestors are necessary to protect against overvoltages both from utility lines in normal operation and against lightning damage to control equipment and contactors in the generator. MOS structures are susceptible to static discharge injury, as are other semiconductor devices, and must be protected by the presence of static protection circuitry. It is recommended that the electronics be analyzed for the circuit transient response to a lightning waveform, to induced and dc current injection, that input/output leads be shielded, everything be grounded, and lightning-resistant components be chosen early in the design phase.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 37
    facet.materialart.
    Unknown
    Effect of thickness on silicon solar cell efficiency (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A computer-aided-design study on the dependence of the efficiency peak of a back-surface field solar cell on the concentrations of the recombination and dopant impurities is presented. The illuminated current-voltage characteristics of more than 100 cell designs are obtained using the transmission line circuit model to numerically solve the Shockley equations. Using an AM 1 efficiency of 17% as a target value, it is shown that the efficiency versus thickness dependence has a broad maximum which varies by less than 1% over more than a three-to-one range of cell thicknesses from 30 to 100 microns. An optically reflecting back surface will give only a slight improvement of AM 1 efficiency, about 0.7%, in this thickness range. Attention is given to the dependence of the efficiency on patchiness across the back-surface field low-high junction in thin cells.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: IEEE Transactions on Electron Devices; ED-29; May 1982
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 38
    facet.materialart.
    Unknown
    A mixed formulation finite element for linear thin shell analysis (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: An eight node curved thin shell slement was tested. The element is based on the degenerate solid concept and the mixed formulation with the independent inplane and transverse shear strains. The number of unknown parameters in the assumed strains is chosen to alleviate the spurious constaining or locking effect. It is indicated that for a pinched cylindrical shell with diaphragmed ends and fixed ends the present element shows good performance.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Solid Mech., 1982; p 219-228
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 39
    facet.materialart.
    Unknown
    Application of a boundary element method to the study of dynamical torsion of beams (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: During dynamic torsion of beam elements, consideration of nonuniform warping effects involves a more general technical formulation then that of Saint-Venant. Nonclassical torsion constants appear in addition to the well known torsional rigidity. The adaptation of the boundary integral element method to the calculation of these constants for general section shapes is described. The suitability of the formulation is investigated with some examples of thick as well as thin walled cross sections.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Solid Mech., 1982; p 129-139
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 40
    facet.materialart.
    Unknown
    Application of the reduced basis method to nonlinear transient thermal analysis (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: An effort to apply the reduced basis method to nonlinear transient thermal analysis is described. The method combines the classical Rayleigh-Ritz and modal superposition techniques with contemporary finite element methods to retain modeling versatility as the degrees of freedom in a problem are reduced. The essence of the method is to use a few thermal modes from eigenvalue analyses as basis vectors to represent the temperature response for a given thermal problem similar to the use of vibration modes to represent displacements in a dynamic response problem. Approximate temperature distributions were obtained using the reduced basis method for a small section of the Shuttle Orbiter lower wing undergoing reentry heating. Good agreement was obtained between the reduced basis method solutions and full system solutions with reductions in the degrees of freedom of up to a factor of four. The good agreement indicates the reduced basis method has the potential for significant reduction in computing effort for thermal analysis; however, considerable work remains to determine techniques for selecting the type and number of basis vectors needed for approximate solutions to more complex transient thermal problems.
    Keywords: STRUCTURAL MECHANICS
    Type: Res. in Struct. and Solid Mech., 1982; p 49-65
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 41
    facet.materialart.
    Unknown
    Interaction between cast silicon properties and solar cell performance (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Three types of cast silicon, Silso, HEM (Heat-Exchanger Method) and UCP (Ubiquitous Crystallization Process) were studied for their use as solar cells. Optical microscopy after etching revealed a high density of uniform dislocations (approaching 1,000,000/sq cm), lines of dislocations indicating stress during crystal growth, and precipitates, some of which generate dislocations. Solar cells were fabricated by three processes. Results of solar cell processing revealed that these materials produce cells of lower efficiency than Czochralski control cells, and that the efficiencies of the three materials were quite close. Diffusion length and spectral response data are shown. Certain structural features are correlated with solar cell efficiency, diffusion length, and spectral response. Electron-beam induced current (EBIC) and light spot scanning are used to back up other measurements.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 42
    facet.materialart.
    Unknown
    Approximate analysis of postbuckled through-width delaminations (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: (Previously announced in STAR as N81-27202)
    Keywords: STRUCTURAL MECHANICS
    Type: Composites Technology Review; 4; Fall 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 43
    facet.materialart.
    Unknown
    Prediction of transonic flutter for a supercritical wing by modified strip analysis (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: (Previously cited in issue 12, p. 2022, Accession no. A81-29471)
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 44
    facet.materialart.
    Unknown
    Evaluation and reduction of errors induced by the Guyan transformation (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The Guyan reduction refers to a method used to reduce the number of degrees of freedom in a structural model for dynamic analysis. Experience shows that, if the method is properly employed, then this reduction method does in fact provide a "reasonably" accurate approximation of the dynamic characteristics of the unreduced model. A method that provides an accurate estimate of the error in each mode of the reduced eigenvalue problem and, in addition, gives first order correction terms that greatly improve the accuracy of the eigenvectors and eigenvalues is presented. The method is demonstrated by standard COSMIC NASTRAN DAMP alters to rigid format 3, real normal mode analysis. Comparative computer time of modal extraction versus error analysis is discussed for the VAX-11/780 version of COSMIC NASTRAN.
    Keywords: STRUCTURAL MECHANICS
    Type: 10th NASTRAN User's Colloq.; p 233-248
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 45
    facet.materialart.
    Unknown
    Improving a NASTRAN dynamic model with test data using LINWOOD (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The concept of expressing test modes as a linear combination of analytical modes was applied to the prediction of corrective terms in math model mass and stiffness. Test data for the Space Shuttle quarter scale solid rocket booster were analyzed by this method and significant improvements in frequency and mode shap correlation are noted. The applicability of the method is demonstrated.
    Keywords: STRUCTURAL MECHANICS
    Type: Georgia Univ. 10th NASTRAN User's Colloq.; p 74-86
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 46
    facet.materialart.
    Unknown
    Solution of axisymmetric fluid structure interaction problems with NASTRAN (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The solution of axisymmetric acoustic fluid structure interaction problems, employing the NASTRAN computer program is presented. A previously developed 3-D Cartesian Coordinates pressure element formulation is adapted especially for axisymmetric elements. Analogous to the 3-D Cartesian Coordinate predecessor, the fluid portion of the problem is modeled with finite elements wherein one of the displacement components serves as a dummy variable for the pressure unknowns. Two alternatives for implementation of the analogy are presented: (1) an approximate method by which dummy values of G, and nu are used to approximately invoke the analogy wherein the accuracy of the approximation is made as close as desired to the proper analogy within an arbitrary small parameter epsiton; (2) an exact method whereby the NASTRAN FORTRAN coding is slightly changed to invoke the analogy exactly. Comparison of the finite element solution to the exact solution to the same problem is given.
    Keywords: STRUCTURAL MECHANICS
    Type: Georgia Univ. 10th NASTRAN User's Colloq.; p 87-111
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 47
    facet.materialart.
    Unknown
    Recent developments of NASTRAN pre- amd post-processors: Response spectrum analysis (RESPAN) and interactive graphics (GIFTS) (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Two specific NASTRAN preprocessors and postprocessors are examined. A postprocessor for dynamic analysis and a graphical interactive package for model generation and review of resuls are presented. A computer program that provides response spectrum analysis capability based on data from NASTRAN finite element model is described and the GIFTS system, a graphic processor to augment NASTRAN is introduced.
    Keywords: STRUCTURAL MECHANICS
    Type: 10th NASTRAN User's Colloq.; p 19-44
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 48
    facet.materialart.
    Unknown
    Recent improvements and enhancements to NASTRAN (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Several improvements and enhancements recently made to NASTRAN are described. Some of the more important features are: streamlined rigid formats; improved rigid formats; changes related to plotting; checking of required PARAM bulk data cards; checkpoint/restart capability; unsorted and sorted bulk data deck echo; automatic output of the DMAP source listing; elimination of link switching caused by use of utility modules; paging the NASTRAN output; processing of mixed record data blocks by INPUT2/OUTPUT2 modules; module execute flag included in the OSCAR listing; and use of the multiple XDMAP cards in the DMAP. It is concluded that these changes increase the usefulness of the program.
    Keywords: STRUCTURAL MECHANICS
    Type: Georgia Univ. 10th NASTRAN User's Colloq.; p 12-17
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 49
    facet.materialart.
    Unknown
    Configuration selection study for isolated loads using parabolic dish modules (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A configuration tradeoff study was conducted to determine optimum solar thermal parabolic dish power systems for isolated load applications. The specific application of an essentially constant power demand as required for MX missile shelters is treated. Supplying a continuous level of power with high reliability is shown to require a power system comprising modular parabolic dish power units where the heat engines of the modular power units can be driven by fossil fuels as well as solar-derived heat. Since constraints on reliability result in the provision of a power generating capability that exceeds the constant demand level, efficient utilization of the power system requires battery storage. Tradeoffs regarding the optimum size of storage are investigated as a function of the number of power modules and the cost of the fossil fuel.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 319-328
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 50
    facet.materialart.
    Unknown
    Ceramic high temperature receiver design and tests (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The High Temperature Solar Thermal Receiver, which was tested a Edwards AFB, CA during the winter of 1980-1981, evolved from technologies developed over a five year period of work. This receiver was tested at the Army Solar Furnace at White Sands, NM in 1976. The receiver, was tested successfully at 1768 deg F and showed thermal efficiencies of 85%. The results were sufficiently promising to lead ERDA to fund our development and test of a 250 kW receiver to measure the efficiency of an open cavity receiver atop a central tower of a heliostat field. This receiver was required to be design scalable to 10, 50, and 100 MW-electric sizes to show applicability to central power tower receivers. That receiver employed rectagular silicon carbide panels and vertical stanchions to achieve scalability. The construction was shown to be fully scalable; and the receiver was operated at temperatures up to 2000 deg F to achieve the performance goals of the experiment during tests at the GIT advanced components test facility during the fall of 1978.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc. 247-255 (SEE N83-10525 01-44)
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 51
    facet.materialart.
    Unknown
    The French thermo-helio-electricity-KW parabolic dish program (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The testing and development of parabolic dish solar thermal power plants to produce, thermal mechanical, or electrical energy are discussed. The design, construction, and experiments of prototype collectors to prove the feasibility of such collectors is described.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 225-231
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 52
    facet.materialart.
    Unknown
    Development status of the small community solar power system (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The development status and test results for the Small Community Solar Thermal Power Experiment are presented. Activities on the phase 2 power module development effort are presented with emphasis on the receiver, the plant control subsystem, and the energy transport subsystem. The components include a single prototype power module consisting of a parabolic dish concentrator, a power conversion assembly (PCA), and a multiple-module plant control subsystem. The PCA consists of a cavity receiver coupled to an organic Rankine cycle engine-alternator unit defined as the power conversion subsystem; the PCA is mounted at the focus of a parabolic dish concentrator. At a solar insolation of 100 W/sq m and ambient temperature of 28 C (82 F), the power module produces approximately 20 kW of 3-phase, 3 kHz ac power, depending on the concentrator employed. A ground-mounted rectifier to the central collection site where it is supplied directly to the common dc bus which collects the power from all modules in the plant.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 53-99
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 53
    facet.materialart.
    Unknown
    Acurex Parabolic Dish Concentrator (PDC-2) (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The design approach, rationale for the selected configuration, and the development status of a cost effective point-focus solar concentrator are discussed. The low-cost concentrator reflective surface design is based on the use of a thin, backsilvered mirror glass reflector bonded to a molded structural plastic substrate. The foundation, support, and drive subassembles are described. A hybrid, two-axis, Sun tracking control system based on microprocessor technology was selected. Coarse synthetic tracking is achieved through a microcomputer-based control system to calculate Sun position for transient periods of cloud cover as well as sundown and sunrise positioning. Accurate active tracking is achieved by two-axis optical sensors. Results of the reflective panel demonstration tests investigating slope error, hail impact survivability, temperature/humidity cycling, longitudinal strength/bending stiffness, and torsional stiffness are discussed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 15-20
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 54
    facet.materialart.
    Unknown
    Development status of the PDC-1 Parabolic Dish Concentrator (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The status of development of the 12 m diameter parabolic dish concentrator which is planned for use with the Small Community Solar Thermal Power System. The PDC-1 unit features the use of plastic reflector film bonded to structural plastic gores supported by front-bracing steel ribs. An elevation-over-azimuth mount arrangement is employed, with a conventional wheel-and-track arrangement; outboard trunnions permit the dish to be stored in the face down position, with the added advantage of easy access to the power conversion assembly. The control system is comprised of a central computer (LSI 1123), a manual control panel, a concentrator control unit, two motor controllers, a Sun sensor, and two angular position resolvers. The system is designed for the simultaneous control of several concentrators. The optical testing of reflective panels is described.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 3-13
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 55
    facet.materialart.
    Unknown
    Ultrasonic measurement of axial stress (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The theory of acoustic propagation in strained media is examined, with particular emphasis on rod (bolt) geometries. The continuous wave (CW) approach is the basis of the study, and the theory is developed from a frequency domain analysis standpoint in order to obtain an applied stress/normalized frequency shift relationship. CW measurements may be influenced by such factors as propagation effects, mode conversion, frequency, material properties, and geometry. After the first loading cycle, axial stress measurements for a preloading with an initial frequency of 4.995 36 MHz dropped to 4.989 19 MHz, indicating a 6.17 kHz change. CW and pseudo-CW ultrasonic techniques are found to be reliable for axial stress measurements, and acoustic attenuation measurements correlated to residual stress fields may possibly involve transducer phase cancellation. It is thus concluded that signal drop is an artifact of the transducer directivity, rather than an actual acoustic power decrease.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 56
    facet.materialart.
    Unknown
    Extended range stress intensity factor expressions for chevron-notched short bar and short rod fracture toughness specimens (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Keywords: STRUCTURAL MECHANICS
    Type: International Journal of Fracture; 19; July 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 57
    facet.materialart.
    Unknown
    Crack displacements for J/I/ testing with compact specimens (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The suggestion is made that the standard compact specimen (with opening displacement measured at the crack mouth) may be entirely suitable for J-integral determinations if a very simple conversion factor is used. Experimental determination of J-integral values requires the measurement of displacements at the points of load application. For the compact specimen this is a difficult task. On the basis of studies reported by Newman (1979) and Fisher and Buzzard (1980), it is suggested that for any J-based test the standard compact specimen can be used. A very good approximation to the load point displacement (within 3.4 percent) can be obtained by measuring the crack mouth displacement and multiplying by 0.773.
    Keywords: STRUCTURAL MECHANICS
    Type: International Journal of Fracture; 19; July 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 58
    facet.materialart.
    Unknown
    On restarts in NASTRAN (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The checkpoint/restart capability available in NASTRAN is very sophisticated. Improvements and enhancements to this capability made with a view to increasing its efficiency and usefulness are considered. Some important features resulting from these changes are discussed. In particular, the different types of restarts available in NASTRAN are described and how they are handled both in the rigid format and DMAP environments explained. The output to restart runs are also illustrated.
    Keywords: STRUCTURAL MECHANICS
    Type: Georgia Univ. 10th NASTRAN User's Colloq.; p 249-267
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 59
    facet.materialart.
    Unknown
    NASTRAN of the HEP (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Preliminary plans for the conversion of NASTRAN to DENELCOR's heterogeneous element processor (HEP) are presented. First, a brief history of computer architecture and the architecture of the HEP computer system are discussed. Second, a description of the HEP computer system is provided. Lastly, the preliminary NASTRAN conversion plans for link management, I/O management, memory management, and code optimization are discussed.
    Keywords: STRUCTURAL MECHANICS
    Type: Georgia Univ. 10th NASTRAN User's Colloq.; p 187-203
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 60
    facet.materialart.
    Unknown
    A new capability for elastic aircraft airloads via NASTRAN (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A new direct matrix abstract program for NASTRAN written to calculate internal stresses and airloads for a flexible wing is described. The difficulties encountered in interfacing the doublet lattice solution to the aerodynamic problem to the finite element solution to the structural problem are discussed. A brief numerical example is included.
    Keywords: STRUCTURAL MECHANICS
    Type: Georgia Univ. 10th NASTRAN User's Colloq.; p 165-186
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 61
    facet.materialart.
    Unknown
    Finite element solution of torsion and other 2-D Poisson equations (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The NASTRAN structural analysis computer program may be used, without modification, to solve two dimensional Poisson equations such as arise in the classical Saint Venant torsion problem. The nonhomogeneous term (the right-hand side) in the Poisson equation can be handled conveniently by specifying a gravitational load in a "structural" analysis. The use of an analogy between the equations of elasticity and those of classical mathematical physics is summarized in detail.
    Keywords: STRUCTURAL MECHANICS
    Type: Georgia Univ. 10th NASTRAN User's Colloq.; p 153-164
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 62
    facet.materialart.
    Unknown
    Commercialization of parabolic dish systems (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The impact of recent federal tax and regulatory legislation on the commercialization of parabolic solar reflector technology is assessed. Specific areas in need of technical or economic improvement are noted.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 201-205
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 63
    facet.materialart.
    Unknown
    PKI solar thermal plant evaluation at Capitol Concrete Products, Topeka, Kansas (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A system feasibility test to determine the technical and operational feasibility of using a solar collector to provide industrial process heat is discussed. The test is of a solar collector system in an industrial test bed plant at Capitol Concrete Products in Topeka, Kansas, with an experiment control at Sandia National Laboratories, Albuquerque. Plant evaluation will occur during a year-long period of industrial utilization. It will include performance testing, operability testing, and system failure analysis. Performance data will be recorded by a data acquisition system. User, community, and environmental inputs will be recorded in logs, journals, and files. Plant installation, start-up, and evaluation, are anticipated for late November, 1981.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 119-121
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 64
    facet.materialart.
    Unknown
    The small community solar thermal power experiment (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: the objectives and current status of the Small Community Solar Thermal Power Experiment are discussed. The adjustments in programs goals made in response to the changing emphasis in the area of solar energy in national policy are addressed. Planned fabrication and testing activities for the test bed concentrator, power conversion assembly, and control system are outlined.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 49-52
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 65
    facet.materialart.
    Unknown
    The PKI collector (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The design and manufacturing of a solar thermal collector is discussed. The collector has three primary subsystems: concentrator, receiver/fluid loop, and controls. Identical curved reflective columns are utilized in a faceted Fresnel design to support 864 one foot square flat inexpensive second-surface, silvered glass mirrors. The columns are ganged together and rotated through their centers of gravity to provide elevation tracking. The concentrator is supported by a lightweight spaceframe structure which distributes all wind and gravity loads to the base supports. The base of the structure is a track which rotates on wheels mounted on concrete piers. A parallel tube steel heat exchanger is mounted at the concentrator focal area in a well insulated, galvanized steel housing. Two rows of vertical close-packed, staggered tubes connect a mud header and a steam header. Automatic two axis tracking and operational control is provided with a microprocessor based package. Concentrator-mounted shadowbands are the basis for active tracking. A software program provides azimuthal tracking during cloudy periods.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 25-34
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 66
    facet.materialart.
    Unknown
    Large displacements and stability analysis of nonlinear propeller structures (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The use of linear rigid formats in COSMIC NASTRAN without DMAP procedures for the analysis of nonlinear propeller structures is described. Approaches for updating geometry and applying follower forces for incremental loading are demonstrated. The COSMIC NASTRAN rigid formats and other independent finite element programs are compared. The comparisons include results from the four approaches for updating the geometry using RIGID FORMAT 1, RIGID FORMATS 4 and 13, MARC and MSC/NASTRAN. It is shown that user friendly updating approaches can be used to predict the large displacements and instability of these nonlinear structures. The approaches are easily implemented by the user and predict conservative results.
    Keywords: STRUCTURAL MECHANICS
    Type: Georgia Univ. 10th NASTRAN User's Colloq.; p 112-132
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 67
    facet.materialart.
    Unknown
    An interactive review system for NASTRAN (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: An interactive review system that addresses the problems of model display, model error checking, and postprocessing is described. The menu driven system consists of four programs whose advantages and limitations are detailed. The interface between NASTRAN and MOVIE-BYU, the modifications required to make MOVIE usable in a finite element context, and the resulting capabilities of MOVIE as a graphics postprocessor for NASTRAN are illustrated.
    Keywords: STRUCTURAL MECHANICS
    Type: Georgia Univ. 10th NASTRAN User's Colloq.; p 45-64
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 68
    facet.materialart.
    Unknown
    Garrett solar Brayton engine/generator status (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The solar advanced gas turbine (SAGT-1) is being developed by the Garrett Turbine Engine Company, for use in a Brayton cycle power conversion module. The engine is derived from the advanced gas turbine (AGT101) now being developd by Garrett and Ford Motor Company for automotive use. The SAGT Program is presently funded for the design, fabrication and test of one engine at Garrett's Phoenix facility. The engine when mated with a solar receiver is called a power conversion module (PCU). The PCU is scheduled to be tested on JPL's test bed concentrator under a follow on phase of the program. Approximately 20 kw of electrical power will be generated.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 257-282
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 69
    facet.materialart.
    Unknown
    A point focusing collector for an integrated water/power complex (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The utilization potential of the point focusing parabolic dish is identified. Its main design parameters are summarized. Performance tests and the utilization of the collector as primary energy source in a food-water-power complex are described. Process heat, heat storage, heat transfer, and cogeneration are discussed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 207-223
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 70
    facet.materialart.
    Unknown
    A discrete gust model for use in the design of wind energy conversion systems (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A discrete gust model has been designed which includes an expression for the number of times per unit time thy wind exceeds a specific value. This expression, based on Rice's (1944, 1945) number-of-crossings model, assumes that the yearly mean wind speed is averaged over a period of 10 minutes to 1 (one) hour. Vertical and lateral coherence functions are the basis for a mathematical filter which isolates atmospheric disturbances of a characteristic size (e. g., those which would completely engulf a rotor). Predictions are calculated usising the given definition of cut-off frequency, then they are compared with actual data, showing that the model is reliable. The expression is provided in a format such that it may be used for engineering design calculations.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Journal of Applied Meteorology; 21; June 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 71
    facet.materialart.
    Unknown
    Solar/hydrogen systems for the 1985-2000 time frame - A review and assessment (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A comprehensive state-of-the-art review of solar/hydrogen technologies has been conducted. From this, solar/hydrogen production systems which could be commercialized by the year 2000 have been characterized technically and economically. Incentives and disincentives for the early commercialization of four solar/hydrogen systems have been explored, conclusions drawn and recommendations made.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: International Journal of Hydrogen Energy; 7; 1, 19; 1982
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 72
    facet.materialart.
    Unknown
    Reliability of the finite element method for calculating free edge stresses in composite laminates (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The interlaminar normal stress distributions along the interface between the +45 deg and -45 deg plies of a graphite/epoxy laminate, obtained by various investigators, were found to disagree in both magnitude and sign. The reliability of the displacement-formulated finite element method in analyzing the edge-stress problem of a composite laminate is investigated. The history of the edge-stress problem is reviewed, and two well-known elasticity problems, one involving a stress discontinuity and one a singularity, are analyzed. The finite element analysis in these problems yields accurate stress distributions everywhere except in two elements closest to the stress discontinuity or singularity. Stress distributions for a + or -45 deg ply laminate near the singularity were similar to those of the two elasticity problems, demonstrating the methods, accuracy for calculating interlaminar stresses in composite laminates. The disagreement between the numerical methods was attributed to the unsymmetric stress tensor at singularity.
    Keywords: STRUCTURAL MECHANICS
    Type: Computers and Structures; 15; 1, 19; 1982
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 73
    facet.materialart.
    Unknown
    Planar multijunction high voltage solar cell chip (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A new innovative planar multijunction solar cell chip for concentrated sunlight applications is proposed. The chip consists of many voltage-generating regions, called unit cells, which are connected in series within a single silicon wafer, thereby providing a high open-circuit voltage at multiple sun illumination levels. The unit cells are fabricated on 75 micron thick p-type single crystal silicon substrate. Each chip consists of 1.42 x 9.63 mm n(+)/p collecting junctions on the back of the wafer, while the illuminated front surface area is divided into 0.3 micron deep n(+) regions. The fabrication sequence includes standard degreasing and cleaning procedures, double-sided alignment photomasking, introduction of boron and phosphorus impurities, and photolithography. The open circuit voltage of the chip increased rapidly with illumination up to about 4 AM1 suns, and then began to saturate at the sum of the individual unit cell voltages of 3.5 above 4 AM1 suns. A short circuit density per unit cell of 300 mA/sq cm at 20 AM1 suns was observed.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Journal of Applied Physics; 53; Nov. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 74
    facet.materialart.
    Unknown
    A review of resonance response in large, horizontal-axis wind turbines (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: (Previously announced in STAR as N82-23711)
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Solar Energy; 29; 5, 19; 1982
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 75
    facet.materialart.
    Unknown
    Calibration of solar cells by the reference cell method - The spectral mismatch problem (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The calibration of solar cells by means of solar simulators and calibrated reference cells has always been faced with the problem of errors due to source spectral irradiance mismatch and cell spectral response mismatch. A general expression is derived in this paper to enable calculation of mismatch error. The information required to make this calculation is the relative spectra responses of the test and reference cells, and the relative spectral irradiance of the simulator (over the spectral range defined by cell response). The spectral irradiance of the solar standard is assumed given. Experimental results are presented.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Solar Energy; 29; 4, 19; 1982
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 76
    facet.materialart.
    Unknown
    Hybrid thermoelectric solar collector design and analysis (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A flat-plate solar collector is conceived where energy cascades through thermoelectric power modules generating direct-current electricity. The intent of this work was to choose a collector configuration and to perform a steady-state thermal performance assessment. A set of energy balance equations were written and solved numerically for the purpose of optimizing collector thermal and electrical performance. The collector design involves finned columns of thermoelectric modules imbedded in the absorber plate (hot junction) over a parallel array of vertical tubes. The thermoelectric power output is limited by the small hot-junction/cold-junction temperature difference which can be maintained under steady-state conditions. The electric power per unit tube pass area is found to have a maximum as a function of a geometric parameter, while electric power is maximized with respect to an electric resistance ratio. Although the electric power efficiency is small, results indicate that there is sufficient electric power production to drive a coolant circulator, suggesting the potential for a stand-alone system.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 77
    facet.materialart.
    Unknown
    Energy consumption analysis for the Mars deep space station (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Results for the energy consumption analysis at the Mars deep space station are presented. It is shown that the major energy consumers are the 64-Meter antenna building and the operations support building. Verification of the antenna's energy consumption is highly dependent on an accurate knowlege of the tracking operations. The importance of a regular maintenance schedule for the watt hour meters installed at the station is indicated.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: The Telecommun. and Data Acquisition Rept.; p 200-207
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 78
    facet.materialart.
    Unknown
    Analysis of capacitive heat exchangers, part 2 (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The performance of a simple capacitive heat exchanger was analyzed. The shooting method for solving the governing equations is presented. Simplified linear and nonlinear models are analyzed using this method and it is shown that capacitive heat exchangers are more efficient than conventional ones.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: The Telecommun. and Data Acquisition Rept.; p 126-144
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 79
    facet.materialart.
    Unknown
    Solution of Von Karman's plate equation with perturbation and series summation (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A nonliner series summation technique was combined with Chien's small parameter perturbation technique to solve the problem of the finite deflection of a simply supported circular plate subjected to a uniform transverse load. Problems involving finite deflections of plates with simply supported or free edges were regarded as almost intractable. The great advantage of incorporating the summation method into the solution procedure is demonstrated.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Centre Res. in Struct. and Solid Mech., 1982; p 349-361
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 80
    facet.materialart.
    Unknown
    Susceptibility of symmetric structures to nonlinear torsional coupling (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The susceptibility to induced torsional response of symmetric building structures with nonliner resisting elements was investigated. Stability curves show the effect of the arrangement of the load resisting elements on induced torsional coupling in these nonliner but other wise symmetric structures. Universal upper and lower bound instability curves are also derived; these identify the susceptibility to torsional coupling of symmetric structures with different stiffness arrangements but which have equal mass and total lateral stiffness, and which are intended to model alternative structural strategies for lateral load resistance.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Solid Mech., 1982; p 313-328
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 81
    facet.materialart.
    Unknown
    Synthesis of frameworks under multilevel performance constraints (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A method for the minimum weight design of practical planar frameworks under both service and ultimate loading conditions is presented. Acceptable elastic stresses and displacements are ensured at the service load level while, simultaneously, adequate safety against plastic collapse is ensured at the ultimate load level. The features of the design method for an industrial steel mill building are illustrated.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Solid Mech., 1982; p 285-299
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 82
    facet.materialart.
    Unknown
    A simplified solar cell array modelling program (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: As part of the energy conversion/self sufficiency efforts of DSN engineering, it was necessary to have a simplified computer model of a solar photovoltaic (PV) system. This article describes the analysis and simplifications employed in the development of a PV cell array computer model. The analysis of the incident solar radiation, steady state cell temperature and the current-voltage characteristics of a cell array are discussed. A sample cell array was modelled and the results are presented.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: The Telecommun. and Data Acquisition Rept.; p 167-185
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 83
    facet.materialart.
    Unknown
    An exact zooming method for finite element analyses (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: An exact zooming technique which employs static condensation and exact structural reanalysis methods was developed. Successive application of static condensation reduces the system to one that is only associated with the degrees of freedom (dof) of the original model. Application of an exact static reanalysis technique permits the displacements at the dof of the original model that are contained in the zoomed portion of the structure to be obtained first. The response external to the zoom, as well as the response of additional dof within various levels of zooming, is computed. With the triangular factor of the stiffness matrix of the original system available, this approach involves only the solution of a system of equations of small order.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. Solid Mech., 1982; p 229-249
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 84
    facet.materialart.
    Unknown
    An emulator for minimizing finite element analysis implementation resources (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A finite element analysis emulator providing a basis for efficiently establishing an optimum computer implementation strategy when many calculations are involved is described. The SCOPE emulator determines computer resources required as a function of the structural model, structural load-deflection equation characteristics, the storage allocation plan, and computer hardware capabilities. Thereby, it provides data for trading analysis implementation options to arrive at a best strategy. The models contained in SCOPE lead to micro-operation computer counts of each finite element operation as well as overall computer resource cost estimates. Application of SCOPE to the Memphis-Arkansas bridge analysis provides measures of the accuracy of resource assessments. Data indicate that predictions are within 17.3 percent for calculation times and within 3.2 percent for peripheral storage resources for the ELAS code.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Solid Mech., 1982; p 185-199
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 85
    facet.materialart.
    Unknown
    Interaction of heat production, strain rate and stress power in a plastically deforming body under tensile test (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: At high strain rates the heat produced by plastic deformation can give rise to a rate dependent response even if the material has rate independent constitutive equations. This effect has to be evaluated when interpreting a material test, or else it could erroneously be ascribed to viscosity. A general thermodynamic theory of tensile testing of elastic-plastic materials is given in this paper; it is valid for large strain at finite strain rates. It enables discovery of the parameters governing the thermodynamic strain rate effect, provides a method for proper interpretation of the results of the tests of dynamic plasticity, and suggests a way of planning experiments in order to detect the real contribution of viscosity.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Solid Mech., 1982; p 113-127
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 86
    facet.materialart.
    Unknown
    Nonlinear constitutive theory for turbine engine structural analysis (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A number of viscoplastic constitutive theories and a conventional constitutive theory are evaluated and compared in their ability to predict nonlinear stress-strain behavior in gas turbine engine components at elevated temperatures. Specific application of these theories is directed towards the structural analysis of combustor liners undergoing transient, cyclic, thermomechanical load histories. The combustor liner material considered in this study is Hastelloy X. The material constants for each of the theories (as a function of temperature) are obtained from existing, published experimental data. The viscoplastic theories and a conventional theory are incorporated into a general purpose, nonlinear, finite element computer program. Several numerical examples of combustor liner structural analysis using these theories are given to demonstrate their capabilities. Based on the numerical stress-strain results, the theories are evaluated and compared.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Solid Mech., 1982; p 67-96
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 87
    facet.materialart.
    Unknown
    A semi-implicit dynamic relaxation algorithm for static nonlinear structural analysis (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A semiimplicit dynamic relaxation technique for solution of the nonlinear structural equlibrium equation is presented. A previously presented basic transient response analysis algorithm is employed, permitting use of one solution method and one software module for both static and dynamic analyses. A theoretical comparison of the method with explicit dynamic relaxation techniques shows that it offers a substantially improved convergence property without additional computational overhead.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Solid Mech., 1982; p 1-10
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 88
    facet.materialart.
    Unknown
    the finite element machine: An experiment in parallel processing (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The Finite Element Machine at the NASA Langley Research Center is a prototype computer designed to support parallel solutions to structural analysis problems. The hardware architecture and support software for the machine, initial solution algorithms and test applications, and preliminary results are described. Directions for future work are presented.
    Keywords: STRUCTURAL MECHANICS
    Type: Res. in Struct. and Solid Mech., 1982; p 201-217
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 89
    facet.materialart.
    Unknown
    Integration of multidimensional regions with applications to finite element analysis (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Alternatives to Gaussian integration methods for multidimensional regions are presented. These rules preserve the convergence behavior of the exact integrated element but require fewer evaluation points than the Gauss methods. Numerical examples are given to verify the behavior of the new integration rules.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Solid Mech., 1982; p 171-183
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 90
    facet.materialart.
    Unknown
    A novel boundary element method program for heat transfer analysis of composite materials (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A boundary element method computer program developed for heat transfer analysis of two dimensional composite structures is described. The program runs on a time share mode and interacts with the user for multirun analysis. During a run, the geometry can be modified interactively by the user as many times as desired by using various options available and the new results printed or plotted. A concept of plotting the results for boundary element method is introduced. The advantage of such a program over the finite element method for simple design problems is demonstrated.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Solid Mech., 1982; p 141-152
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 91
    facet.materialart.
    Unknown
    Operator split methods in the numerical solution of the finite deformation elastoplastic dynamic problem (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The spatial formulation of the elastoplastic dynamic problem for finite deformations is considered. A thermodynamic argument leads to an additive decomposition of the spatial rate of deformation tensor and allows an operator split of the evolutionary equations of the problem into elastic and plastic parts. This operator split is taken as the basis for the definition of a global product algorithm. In the context of finite element discretization the product algorithm entails, for every time step, the solution of a nonlinear elastodynamic problem followed by the application of plastic algorithms that operate on the stresses and internal variables at the integration points and bring in the plastic constitutive equations. Suitable plastic algorithms are discussed for the cases of perfect and hardening plasticity and viscoplasticity. The proposed formalism does not depend on any notion of smoothness of the yield surface and is applicable to arbitrary convex elastic regions, with or without corners. The stabiity properties of the global product algorithm are shown to be identical to those of the algorithm used for the integration of the nonlinear elastodynamic problem. Numerical examples illustrate the accuracy of the method.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Solid Mech., 1982; p 25-47
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 92
    facet.materialart.
    Unknown
    Dynamic response of lined tunnels by boundary elements (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The dynamic stress concentration manifested around a lined cylindrical tunnel buried in an infinitely extending linear elastic or viscoelastic medium due to the passage of transient disturbances was investigated. Plane strain is assumed to hold and the transient disturbances can be of any arbitrary time variation. The boundary element method formulated in the Laplace transform domain is employed. Isoparametric boundary elements are used in the discretization of the liner and tunnel surfaces. Viscoelastic material behavior can be readily obtained from the linear elastic case in the Laplace transform domain through the use of the correspondence principle. The transient solution is recovered by numerical inversion of the solution obtained in the transformed domain.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Solid Mech., 1982; p 251-264
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 93
    facet.materialart.
    Unknown
    Experience with specifications applicable to certification (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The Jet Propulsion Laboratory has developed a number of photovoltaic test and measurement specifications to guide the development of modules toward the requirements of future large-scale applications. Experience with these specifications and the extensive module measurement and testing that has accompanied their use is examined. Conclusions are drawn relative to three aspects of product certification: performance measurement, endurance testing and safety evaluation.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 94
    facet.materialart.
    Unknown
    Layered transition metal thiophosphates /MPX3/ as photoelectrodes in photoelectrochemical cells (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Layered crystals of the transition metal thiophosphates were synthesized and characterized for use as photoelectrodes in photoelectrochemical cells. Crystals incorporating tin and manganese show n-type response while those with iron and nickel show p-type response. These materials have a measured indirect bandgap of about 2.1 eV. They show ability to photoelectrolyze water in acid solutions with onset potentials which change in a Nernstian way as the PH of the solution changes. The onset potential is near zero volts versus a saturated calomel electrode at pH 2. At n-type crystals, oxygen could be evolved upon irradiation at underpotentials of 850 mV and at p-type crystals, hydrogen could be evolved at underpotentials of 400 mV, indicating a net gain in energy conversion. All crystals were unstable in basic solution. Liquid junction photovoltaic cells in iodide-triiodide acid solution using these layered materials were also constructed and found to have low efficiences.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: Solar Energy Materials; 7; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 95
    facet.materialart.
    Unknown
    Using NASTRAN to solve symmetric structures with nonsymmetric loads (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A method for computation of reflective dihedral symmetry in symmetrical structures under nonsymmetric loads is described. The method makes it possible to confine the analysis to a half, a quarter, or an octagonal segment. The symmetry of elastic deformation is discussed, and antisymmetrical deformation is distinguished from nonsymmetrical deformation. Modes of deformation considered are axial, bending, membrane, and torsional deformation. Examples of one and two dimensional elements are presented and extended to three dimensional elements. The method of setting up a problem within NASTRAN is discussed. The technique is applied to a thick structure having quarter symmetry which was modeled with polyhedra and subjected to five distinct loads having varying degrees of symmetry.
    Keywords: STRUCTURAL MECHANICS
    Type: 10th NASTRAN User's Colloq.; p 216-232
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 96
    facet.materialart.
    Unknown
    On elastic-plastic analysis of an overloaded breech ring using NASTRAN (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The piece-wise linear analysis option of the NASTRAN code was used to analyze a photoplastic model for a sliding breech mechanism. A two dimensional finite element representation for the breech ring was chosen and the material was made of polycarbonate resin. The aluminum block was regarded as rigid and the width of contact was assumed to remain unchanged during loading. The displacements and stresses in the breech ring were obtained for loading in the elastic as well as plastic range. The maximum tensile stresses before and after complete unloading were obtained and compared with numerical and experimental results.
    Keywords: STRUCTURAL MECHANICS
    Type: Georgia Univ. 10th NASTRAN User's Colloq.; p 143-152
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 97
    facet.materialart.
    Unknown
    Prediction of bead area contact load at the tire-wheel interface using NASTRAN (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The theoretical prediction of the bead area contact load at the tire wheel interface using NASTRAN is reported. The application of the linear code to a basically nonlinear problem results in excessive deformation of the structure and the tire-wheel contact conditions become impossible to achieve. A psuedo-nonlinear approach was adopted in which the moduli of the cord reinforced composite are increased so that the computed key deformations matched that of the experiment. Numerical results presented are discussed.
    Keywords: STRUCTURAL MECHANICS
    Type: Georgia Univ. 10th NASTRAN User's Colloq.; p 133-142
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 98
    facet.materialart.
    Unknown
    On the use of harmonic expansions in magnetic field problems in NASTRAN (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The use of a prolate spheroidal harmonic expansion to compute far field results in magnetics problems with the DTNSRDC version of NASTRAN is demonstrated. When field problems with infinite exterior domains are solved by the finite element method, the domain must be modeled to infinity. The density of the finite element mesh usually decreases as the distance from the structure increases, thus degrading the results in the far field.
    Keywords: STRUCTURAL MECHANICS
    Type: Georgia Univ. 10th NASTRAN User's Colloq.; p 65-73
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 99
    facet.materialart.
    Unknown
    Operating in the age of NASTRAN (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The history of the development of the NASTRAN computer program, a general purpose finite element code for structural analysis, is described. The need for research programs to improve analysis of structures, and the writing of a computer program to give numerical solutions for shell behavior, were the impetus for the program design. The use of finite elements to obtain engineering solutions was introduced. The architecture, solution structure, DMAP language, decomposition technique for banded matrices with active columns, general purpose plotter, engineering data inputs, elastic element routines, programmer manuals, of NASTRAN's system design are described.
    Keywords: STRUCTURAL MECHANICS
    Type: 10th NASTRAN User's Colloq.; p 1-11
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 100
    facet.materialart.
    Unknown
    Panel discussions: Industrial support sector requirements (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Industrial support was the subject of a panel discussion on solar energy technology. Members of various energy-related businesses and agencies were present. Topics cofered include: (1) solar collectors; (2) solar energy policy; (3) government/industry relations; and (4) economic factors which influence the use of solar energy.
    Keywords: ENERGY PRODUCTION AND CONVERSION
    Type: JPL Parabolic Dish Solar Thermal Power Ann. Program Rev., Proc.; p 339-353
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...