ALBERT

Description / Table of Contents: This book on space geodesy presents pioneering geometrical approaches in the modelling of satellite orbits and gravity field of the Earth, based on the gravity field missions CHAMP, GRACE and GOCE in the LEO orbit. Geometrical approach is also extended to precise positioning in space using multi-GNSS constellations and space geodesy techniques in the realization of the terrestrial and celestial reference frame of the Earth. This book addresses major new developments that were taking place in space geodesy in the last decade, namely the availability of GPS receivers onboard LEO satellites, the multitude of the new GNSS satellite navigation systems, the huge improvement in the accuracy of satellite clocks and the revolution in the determination of the Earth's gravity field with dedicated satellite missions

Description / Table of Contents: The Mineralogical Society of America sponsored a short course for which this was the text at Stanford University December 9 and 10, 1995, preceding the Fall Meeting of the American Geophysical Union and MSA in San Fransisco, with about 100 professionals and graduate students in attendance. A silicate melt phase is the essential component of nearly all igneous processes, with dramatic consequences for the properties of the Earth's interior. Throughout Earth history and continuing to the present day, silicate melts have acted as transport agents in the chemical and physical differentiation of the Earth into core, mantle and crust. The occurrence of such magmatic processes leads to the definition of our planet as "active," and the resulting volcanism has a profound impact on the Earth's atmosphere, hydrosphere and biosphere. Although near-surface melts are observed directly during volcanic eruptions, the properties of magmas deep within the Earth must be characterized and constrained by laboratory experiments. Many of these experiments are designed to aid in developing an atomic level understanding of the structure and dynamics of silicate melts under the P- T conditions of the Earth's crust and mantle, which will make extrapolation from the laboratory results to the behavior of natural magmas as reliable as possible. Silicate melts are also the archetypal glass-forming materials. Because of the ready availability of raw materials, and the ease with which molten silicates can be vitrified, commercial "glass" has necessarily implied a silicate composition, over most of the history of glass technology. The properties of the melt, or "slag" in metallurgical extractions, determine the nature of the glass formed, and the needs of the glass industry have provided much of the impetus for understanding the structure-property relations of molten silicates as well as for the glasses themselves. It is now recognized that any liquid might become glassy, if cooled rapidly enough, and understanding the thermodynamic and kinetic aspects of the glass transition, or passage between the liquid and glassy states of matter, has become a subject of intense interest in fundamental physics and chemistry. Glasses have also been studied in many geochemical investigations, often as substitutes for the high temperature melts, with the results being extrapolated to the liquid state. In many cases, in situ techniques for direct investigation of these refractory systems have only recently become available. Much valuable information concerning the melt structure has been gleaned from such studies. Nevertheless, there are fundamental differences between the liquid and glassy states. In liquids, the structure becomes progressively more disordered with increasing temperature, which usually gives rise to major changes in all thermodynamic properties and processes. These changes must, in general, be investigated directly by in situ studies at high temperature. Studies of glass only represent a starting point, which reflect a frozen image of the melt "structure" at the glass transition temperature. This is generally hundreds of degrees below the near-liquidus temperatures of greatest interest to petrologists. Since the early 1980s, a much deeper understanding of the structure, dynamics, and properties of molten silicates has been developed within the geochemical community, applying techniques and concepts developed within glass science, extractive metallurgy and liquid state physics. Some of these developments have far-reaching implications for igneous petrology. The purpose of this Short Course and volume is to introduce the basic concepts of melt physics and relaxation theory as applied to silicate melts, then to describe the current state of experimental and computer simulation techniques for exploring the detailed atomic structure and dynamic processes which occur at high temperature, and finally to consider the relationships between melt structure, thermodynamic properties and rheology within these liquids. These fundamental relations serve to bridge the extrapolation from often highly simplified melt compositions studied in the laboratory to the multicomponent systems found in nature. This volume focuses on the properties of simple model silicate systems, which are usually volatile-free. The behavior of natural magmas has been summarized in a previous Short Course volume (Nicholls and Russell, editors, 1990: Reviews in Mineralogy, Vol. 24), and the effect of volatiles on magmatic properties in yet another (Carroll and Holloway, editors, 1994: Vol. 30). In the chapters by Moynihan, by Webb and Dingwell, and by Richet and Bottinga, the concepts of relaxation and the glass transition are introduced, along with techniques for studying the rheology of silicate liquids, and theories for understanding the transport and relaxation behavior in terms of the structure and thermodynamic properties of the liquid. The chapter by Dingwell presents applications of relaxation-based studies of melts in the characterization of their properties. Chapters by Stebbins, by Brown, Farges and Calas, and by McMillan and Wolf present the principal techniques for studying the melt structure and atomic scale dynamics by a variety of spectroscopic and diffraction methods. Wolf and McMillan summarize our current understanding of the effects of pressure on silicate glass and melt structure. Chapters by Navrotsky and by Hess consider the thermodynamic properties and mixing relations in simple and multicomponent aluminosilicate melts, both from a fundamental structural point of view and empirical chemical models which can be conveniently extrapolated to natural systems. The chapter by Chakraborty describes the diffusivity of chemical species in silicate melts and glasses, and the chapter by Poole, McMillan and Wolf discusses the application of computer simulation methods to understanding the structure and dynamics of molten silicates. The emphasis in this volume is on reviewing the current state of knowledge of the structure, dynamics and physical properties of silicate melts, along with present capabilities for studying the molten state under conditions relevant to melting within the Earth, with the intention that these techniques and results can then be applied to understanding and modeling both the nature of silicate melts and the role of silicate melts in nature.

Description / Table of Contents: This volume contains the contributions presented at a short course held in Golden, Colorado, October 25-27, 1996 in conjunction with the Mineralogical Society of America's (MSA) Annual Meeting with the Geological Society of America in Denver, Colorado. The field of reactive transport within the Earth Sciences is a highly multidisciplinary area of research. The field encompasses a number of diverse disciplines including geochemistry, geology, physics, chemistry, hydrology, and engineering. The literature on the subject is similarly spread out as can be seen by a perusal of the bibliographies at the end of the chapters in this volume. Because these distinct disciplines have evolved largely independently of one another, their respective treatments of reactive transport in the Earth Sciences are based on different terminologies, assumptions, and levels of mathematical rigor. This volume and the short course which accompanies it, is an attempt to some extent bridge the gap between these different disciplines by bringing together authors and students from different backgrounds. A wide variety of geochemical processes including such diverse phenomena as the transport of radiogenic and toxic waste products, diagenesis, hydrothermal ore deposit formation, and metamorphism are the result of reactive transport in the subsurface. Such systems can be viewed as open bio-geochemical reactors where chemical change is driven by the interactions between migrating fluids, solid phases, and organisms. The evolution of these systems involves diverse processes including fluid flow, chemical reaction, and solute transport, each with differing characteristic time scales. This volume focuses on methods to describe the extent and consequences of reactive flow and transport in natural subsurface systems. Our ability to quantify reactive transport in natural systems has advanced dramatically over the past decade. Much of this advance is due to the exponential increase in computer computational power over the past generation-geochemical calculations that took years to perform in 1970 can be performed in seconds in 1996. Taking advantage of this increase of computational power, numerous comprehensive reactive transport models have been developed and applied to natural phenomena. These models can be used either qualitatively or qualitatively to provide insight into natural phenomena. Quantitative models force the investigator to validate or invalidate ideas by putting real numbers into an often vague hypothesis and thereby starting the thought process along a path that may result in acceptance, rejection, or modification of the original hypothesis. Used qualitatively, models provide. insight into the general features of a particular phenomenon, rather than specific details. One of the major questions facing the use of hydrogeochemical models is whether or not they can be used with confidence to predict future evolution of groundwater systems. There is much controversy concerning the validity and uncertainties of non-reactive fluid flow systems. Adding chemical interaction to these flow models only confounds the problem. Although such models may accurately integrate the governing physical and chemical equations, many uncertainties are inherent in characterizing the natural system itself. These systems are inherently heterogeneous on a variety of scales rendering it impossible to know precisely the many details of the flow system and chemical composition of the host rock. Other properties of natural systems such as permeability and mineral surface area, to name just two, may never be known with any great precision, and in fact may be unknowable. Because of these uncertainties, it remains an open question as to what extent numerical models of groundwater flow and reactive transport wilI be useful in making accurate quantitative predictions. Nevertheless, reactive transport models should be able to predict the outcome for the particular representation of the porous medium used in the model. Finally, it should be mentioned that numerical models are often our only recourse to analyze such environmental problems as safe disposal of nuclear waste where predictions must be carried out over geologic time spans. Without such models it would be impossible to analyze such systems, because they involve times too long to perform laboratory experiments. The results of model calculations may affect important political decisions that must be made. Therefore, it is all the more important that models be applied and tested in diverse environments so that confidence and understanding of the limitations and strengths of model predictions are understood before irreversible decisions are made that could adversely affect generations to come.

Description / Table of Contents: When Van't Hoff calculated the effect of solution composition on the gypsum-anhydrite transition a century ago, he solved a significant geochemical problem (Hardie, 1967). Other well known examples of the early use of chemical thermodynamics in geology are Bowen's calculations of the plagioclase melting loop and the diopside-anorthite eutectic (Bowen, 1913, 1928). Except for a few specialists, however, these techniques were largely ignored by earth scientists during the first half of the 20th century. The situation changed dramatically by the 1950's when more and better thermodynamic data on geologic materials became available, and when thermodynamic arguments of increasing sophistication began to permeate the petrologic and geochemical literature. This rejuvenation was spearheaded by D.S. Korzhinskii, H. Ramberg, J.B. Thompson, J. Verhoogen and others. Today a graduating petrologist or geochemist can be expected to have a thorough grounding in geological thermodynamics. Rapid intellectual growth in a field brings with it the difficulty of keeping abreast of parallel and diverging specialties. In order to alleviate this problem, we asked a group of active researchers to contribute up-to-date summaries relating to their specialties in the thermodynamic modeling of geological materials, in particular minerals, fluids and melts. Whereas each of these topics could fill a book, by covering the whole range we hope to emphasize similarities as much as differences in the treatment of various materials. For instance, there are useful parallels to be noted between Margules parameters and Pitzer coefficients. The emphasis here is on modeling, after the required data have been collected, and the approach ranges form theoretical to empirical. We deliberately imposed few restrictions on the authors. Some chose to interpret modeling in the rigorous thermodynamic sense, while others approached their topics from more general geochemical viewpoints. We hope that any lack of unity and balance is compensated for by a collection of lively and idiosyncratic essays in which students and professionals will find new ideas and helpful hints. If the selection appears tilted towards fluids, it is because other recent summaries have emphasized minerals and melts. The editors and authors of this volume presented a short course, entitled "Thermodynamic Modeling of Geological Materials: Minerals, Fluids amd Melts," October 22-25, 1987, at the Wickenburg Inn near Phoenix, Arizona.

Description / Table of Contents: This volume was written in preparation for a short course by the same title, sponsored by the Mineralogical Society of America, October 22 and 23, 1999 in Golden, Colorado, prior to MSA's joint annual meeting with the Geological Society of America. Research emphasis in traditional mineralogy has often focused on detailed studies of a few hundred common rock-forming minerals. However, scanning the contents of a current issue of American Mineralogist or Canadian Mineralogist, or the titles of recent Reviews in Mineralogy volumes reveals that the emphasis of mineralogical research has undergone considerable change recently. Less-common, low-temperature minerals are receiving ever increasing attention, often owing to their importance to the environment. A tremendous challenge lies ahead for mineralogists and geochemists: the occurrences, structures, stabilities, and paragenesis of perhaps a thousand low-temperature minerals require detailed study if geoscientists are to be properly equipped to tackle environmental problems today and in the future. In many low-temperature environments mineral assemblages are extremely complex, with more than 10 species common in many em-size samples. This Reviews in Mineralogy volume provides detailed reviews of various aspects of the mineralogy and geochemistry of uranium; hopefully the reader will benefit from this presentation, and perhaps more importantly, the reader may develop a sense of the tremendous amount of work that remains to be done, not only concerning uranium in natural systems, but for low-temperature mineralogy and geochemistry in general. The low crustal abundance of uranium belies its mineralogical and geochemical significance: more than five percent of minerals known today contain uranium as an essential constituent. Uranium is a geochemical and geochronological indicator, and the U-Pb decay series has long been one of the most important systems for dating rocks and minerals. Uranium is an important energy source, and the uranium nuclear fuel cycle has generated a great deal of interest in uranium mineralogy and geochemistry since the first controlled nuclear fission reaction nearly sixty years ago. Current interest in uranium mineralogy and geochemistry stems in large part from the utilization of uranium as a natural resource. Environmental issues such as coping with uranium mine and mill tailings and other uranium-contaminated sites, as well as permanent disposal of highly radioactive uranium-based nuclear fuels in deep geologic repositories, have all refocused attention on uranium. More than twenty years have passed since the 1978 Mineralogical Association of Canada's Short Course on Uranium Deposits. A realignment of research focus has clearly occurred since then, from exploration and exploitation to environmental remediation and geological "forecasting" of potential future impacts of decisions made today. The past decades have produced numerous remarkable advances in our understanding of uranium mineralogy and geochemistry, as well as technological and theoretical advances in analytical techniques which have revolutionized research of trace-elements, including uranium. It was these advances that provided us the impetus to develop this volume. We have attempted to produce a volume that incorporates most important aspects of uranium in natural systems, while providing some insight into important applications of uranium mineralogy and geochemistry to environmental problems. The result is a blend of perspectives and themes: historical (Chapter 1), crystal structures (Chapter 2), systematic mineralogy and paragenesis (Chapters 3 and 7), the genesis of uranium ore deposits (Chapters 4 and 6), the geochemical behavior of uranium and other actinides in natural fluids (Chapter 5), environmental aspects of uranium such as microbial effects, groundwater contamination and disposal of nuclear waste (Chapters 8, 9 and 10), and various analytical techniques applied to uranium-bearing phases (Chapters 11-14).

Description / Table of Contents: We seek to understand the timing and processes by which our solar system formed and evolved. There are many ways to gain this understanding including theoretical calculations and remotely sensing planetary bodies with a number of techniques. However, there are a number of measurements that can only be made with planetary samples in hand. These samples can be studied in laboratories on Earth with the full range of high-precision analytical instruments available now or available in the future. The precisions and accuracies for analytical measurements in modern Earth-based laboratories are phenomenal. However, despite the fact that certain types of measurements can only be done with samples in hand, these samples will always be small in number and not necessarily representative of an entire planetary surface. Therefore, it is necessary that the planetary material scientists work hand-in-hand with the remote sensing community to combine both types of data sets. This exercise is in fact now taking place through an initiative of NASA's Curation and Analysis Planning Team for Extraterrestrial Materials (CAPTEM). This initiative is named "New Views of the Moon: Integrated Remotely Sensed, Geophysical, and Sample Datasets." As preliminary results of the Lunar Prospector mission become available, and with the important results of the Galileo and Clementine missions now providing new global data sets of the Moon, it is imperative that the lunar science community synthesize these new data and integrate them with one another and with the lunar-sample database. Integrated approaches drawing upon multiple data sets can be used to address key problems of lunar origin, evolution, and resource definition and utilization. The idea to produce this Reviews in Mineralogy (RIM) volume was inspired by the realization that many types of planetary scientists and, for that matter, Earth scientists will need access to data on the planetary sample suite. Therefore, we have attempted to put together, under one cover, a comprehensive coverage of the mineralogy and petrology of planetary materials. The book is organized with an introductory chapter that introduces the reader to the nature of the planetary sample suite and provides some insights into the diverse environments from which they come. Chapter 2 on Interplanetary Dust Particles (IDPs) and Chapter 3 on Chondritic Meteorites deal with the most primitive and unevolved materials we have to work with. It is these materials that hold the clues to the nature of the solar nebula and the processes that led to the initial stages of planetary formation. Chapter 4, 5, and 6 consider samples from evolved asteroids, the Moon and Mars respectively. Chapter 7 is a brief summary chapter that compares aspects of melt-derived minerals from differing planetary environments.

Description / Table of Contents: In October 1975 a Short Course on Feldspar Mineralogy was held at the Hotel Utah, Salt Lake City, in conjunction with the annual meetings of the Mineralogical Society of America. Richard A. Yund, David B. Stewart, Joseph V. Smith and Paul R. Ribbe presented workshops on x-ray single-crystal and powder diffraction methods and electron optical techniques as applied to the study of feldspars and presented eight lectures, the substance of which became the nine chapters of the first edition of Feldspar Mineralogy. That book was published by the Mineralogical Society as the second volume of its series entitled Short Course Notes. In 1980 the MSA renamed the series Reviews in Mineralogy to more accurately reflect the scope and contents of the volumes, some of which -- including Volume 5 (1st and 2nd editions), this volume and a forthcoming one on fluid inclusions --were written without presentation at a short course. It will be noted by readers experienced with feldspars that there are many new ideas appearing in Chapters 3, 4 and 5 that have neither received scrutiny by review (other than ourselves) nor survived practical tests of time in the research community. There is some danger in this, but the editor decided the greater risk was to produce a review volume soon to be outdated. Inevitably, given the different goals of individual authors in their assigned topics, some repetition of material has occurred, although usually with quite different emphases. Chapters 1, 2, 9 and 10, in which plagioclase structures and diffraction patterns and their Al,Si distributions, phase equilibria and exsolution textures are featured, are notable in this regard. The editor has attempted to cross-reference these and as many other subjects throughout the volume as feasible. This is a luxury not afforded in other books of this series produced with a short course deadline, and it, together with the detailed Table of Contents, compensates to some degree for the lack of an index. Throughout this book repeated references are made to Smith (1974a,b); these are Volumes 1 and 2 of Feldspar Minerals, an encyclopedic work written by Joseph V. Smith and published by Springer-Verlag. We are particularly indebted to Drs. Konrad Springer and H. Wiebking for permission to reproduce many figures free of charge. The editor (and hopefully this volume) benefitted greatly from numerous stimulating discussions with David B. Stewart, some of which reached a high pitch, none of which came to blows, and several of which produced some palpable scientific progress. Stewart read and criticized many of the chapters. The authors are grateful to numerous individual scientists for figures, for data in advance of publication, and for encouragement and correction.

Description / Table of Contents: This volume was prepared for a short course by the same title, organized by Russell J. Hemley and Ho-kwang Mao and sponsored by the Mineralogical Society of America, December 4-6, 1998 on the campus of the University of California at Davis. High-pressure mineralogy has historically been a vital part of the geosciences, but it is only in the last few years that the field has emerged as a distinct discipline as a result of extraordinary recent developments in high-pressure techniques. The domain of mineralogy is now no less than the whole Earth, from the deep crust to the inner core-the entire range of pressures and temperatures under which the planet's constituents were formed or now exist. The primary goal of this field is to determine the physical and chemical properties of materials that underlie and control the structural and thermal state, processes, and evolution of the planet. New techniques that have come 'online' within the last couple of years make it possible to determine such properties under extreme pressures and temperatures with an accuracy and precision that rival measurements under ambient conditions. These investigations of the behavior of minerals under extreme conditions link the scale of electrons and nuclei with global processes of the Earth and other planets in the solar system. It is in this broad sense that the term 'Ultrahigh-Pressure Mineralogy' is used for the title of this volume of Reviews in Mineralogy. This volume sets out to summarize, in a tutorial fashion, knowledge in this rapidly developing area of physical science, the tools for obtaining that knowledge, and the prospects for future research. The book, divided into three sections, begins with an overview (Chapter 1) of the remarkable advances in the ability to subject minerals-not only as pristine single-crystal samples but also complex, natural mineral assemblages-to extreme pressure-temperature conditions in the laboratory. These advances parallel the development of an arsenal of analytical methods for measuring mineral behavior under those conditions. This sets the stage for section two (Chapters 2-8) which focuses on high-pressure minerals in their geological setting as a function of depth. This top-down approach begins with what we know from direct sampling of high-pressure minerals and rocks brought to the surface to detailed geophysical observations of the vast interior. The third section (Chapters 9-19) presents the material fundamentals, starting from properties of a chemical nature, such as crystal chemistry, thermochemistry, element partitioning, and melting, and moving toward the domain of mineral physics such as melt properties, equations of state, elasticity, rheology, vibrational dynamics, bonding, electronic structure, and magnetism. The Review thus moves from the complexity of rocks to their mineral components and finally to fundamental properties arising directly from the play of electrons and nuclei. The following themes crosscut its chapters. Composition of the mantle and core Our knowledge of the composition of the Earth in part is rooted in information on cosmochemical abundances of the elements and observations from the geological record. But an additional and essential part of this enterprise is the utilization of the growing information supplied by mineral physics and chemistry in detailed comparison with geophysical (e.g. seismological) observations for the bulk of the planet. There is now detailed information from a variety of sources concerning crust-mantle interactions in subduction (Liou et aI., Chapter 2; Mysen et aI., Chapter 3). Petrological, geochemical, and isotope studies indicate a mantle having significant lateral variability (McDonough and Rudnick, Chapter 4). The extent of chemical homogeneity versus layering with depth in the mantle, a question as old as the recognition of the mantle itself, is a first-order issue that threads its way throughout the book. Agee (Chapter 5) analyzes competing models in terms of mineral physics, focusing on the origin of seismic discontinuities in the upper mantle. Bina (Chapter 6) examines the constraints for the lower mantle, with particular emphasis given to the variation of the density and bulk sound velocity with depth through to the core-mantle boundary region (Jeanloz and Williams, Chapter 7). Stixrude and Brown (Chapter 8) examine bounds on the composition of the core. Mineral elasticity and the link to seismology The advent of new techniques is raising questions of the mineralogy and composition of the deep Interior to a new level. As a result of recent advances in seismology, the depth-dependence of seismic velocities and acoustic discontinuities have been determined with high precision, lateral heterogeneities in the planet have been resolved, and directional anisotropy has been determined (Chapters 6 and 7). The first-order problem of constraining the composition and temperature as a function of depth alone is being redefined by high-resolution velocity determinations that define lateral chemical or thermal variations. As discussed by Liebermann and Li (Chapter 15), measurements of acoustic velocities can now be carried out simultaneously at pressures that are an order of magnitude higher, and at temperatures that are a factor of two higher, than those possible just a few years ago. The tools are in hand to extend such studies to related properties of silicate melts (Dingwell, Chapter 13). Remarkably, the solid inner core is elastically anisotropic (Chapter 8); with developments in computational methods, condensed-matter theory now provides robust and surprising predictions for this effect (Stixrude et aI., Chapter 19), and with very recent experimental advances, elasticity measurements of core material at core pressures can be performed directly (Chapters 1 and 15). Mantle dynamics The Earth is a dynamic planet: the rheological properties of minerals define the dynamic flow and texture of material within the Earth. Measurement of rheological properties at mantle pressures is a significant challenge that can now be addressed (Weidner, Chapter 16). Deviatoric stresses down to 0.1 GPa to pressures approaching 300 GPa can be quantified in high-pressure cells using synchrotron radiation (Chapter 1). The stress levels are an appropriate scale for understanding earthquake genesis, including the nature of earthquakes that occur at great depth in subducted slabs (deep-focus earthquakes) as these slabs travel through the Earth's mantle. Newly developed high-pressure, high-precision x-ray tools such as monochromatic radiation with modern detectors with short time resolution and employing long duration times are now possible with third-generation synchrotron sources to study the rheology of deep Earth materials under pressure (Chapter 1). Fate of subducting slabs One of the principal interactions between the Earth's interior and surface is subduction of lithosphere into the mantle, resulting in arc volcanoes, chemical heterogeneity in the mantle, as well as deep-focus earthquakes (Chapters 2 and 3). Among the key chemical processes associated with subduction is the role of water in the recycling process (Prewitt and Downs, Chapter 9), which at shallower levels is essential for understanding arc volcanism. Mass and energy transport processes govern global recycling of organic and inorganic materials, integration of these constituents in the Earth's interior, the evolution (chemically and physically) of descending slabs near convergent plate boundaries, and the fate of materials below and above the descending slab. Chapters 5 and 6 discuss the evidence for entrainment and passage of slabs through the 670 km discontinuity, and the possibility of remnant slabs in the anomalous D" region near the core-mantle boundary (Chapter 7). The ultimate fate of the materials cycled to such depths may affect interactions at the core-mantle boundary and may also hold clues to the initiation of diapiric rise. The evolution and fate of a subducting slab can now be addressed by experimental simulation of slab conditions, including in situ monitoring of a simulated slab in high-pressure apparatus in situ x-ray and spectroscopic techniques. The chemistry of volatiles changes appreciably under deep Earth conditions: they can be structurally bound under pressure (Prewitt and Downs, Chapter 9). Melting Understanding pressure-induced changes in viscosity and other physical properties of melts is crucial for chemical differentiation processes ranging from models of the magma ocean in the Earth's early history to the formation of magmatic ore deposits. (Chapter 13). Recent evidence suggests that melting may take place at great depth in the mantle. Seismic observations of a low-velocity zone and seismic anisotropy at the base of the mantle have given rise to debate about the existence of regions of partial melt deep in the mantle (Chapter 7). Deep melting is also important for mantle convection from subduction of the lithosphere to the rising of hot mantle plumes. Very recent advances in determination of melting relations of mantle and core materials with laser-heating techniques are beginning to provide accurate constraints (Shen and Heinz, Chapter 12). Sometimes lost in the debate on melting curves is the fact that a decade ago, there simply were no data for most Earth materials, only guesses and (at best) approximate models. Moreover, it is now possible to carry out in situ melting studies on multi-component systems, including natural assemblages, to deep mantle conditions. These results address whether or not partial melting is responsible for the observed seismic anomalies at the base of the mantle and provide constraints for mantle convection models (Chapter 7). The enigma of the Earth's core The composition, structure, formation, evolution, and current dynamic state of the Earth's core is an area of tremendous excitement (Chapter 8). The keys to understanding the available geophysical data are the material properties of liquid and crystalline iron under core conditions. New synchrotron-based methods and new developments in theory are being applied to determine all of the pertinent physical properties, and in conjunction with seismological and geodynamic data, to develop a full understanding of the core and its interactions with the mantle (Chapter 7). There has been considerable progress in determining the melting and phase relations of iron into the megabar range with new techniques (Chapter 12). Constraints are also obtained from theory (Chapter 19). These results feed into geophysical models for the outer and inner core flow, structural state, evolution, and the geodynamo. Moreover, there is remarkable evidence that the Earth's inner core rotates at a different rate than the rest of the Earth. This evidence in turn rests on the observation that the inner core is elastically anisotropic, a subject of current experimental and theoretical study from the standpoint of mineral physics, as described above. The thermodynamic framework Whole Earth processes must be grounded in accurate thermodynamic descriptions of phase equilibria in multi-component systems, as discussed by Navrotsky (Chapter 10). New developments in this area include increasingly accurate equations of state (Duffy and Wang, Chapter 14) required for modeling of phase equilibria as well as for direct comparison with seismic density profiles through the planet. Recent developments in in situ vibrational spectroscopy and theoretical models provide a means for independently testing available thermochemical data and a means for extending those data to high pressures and temperatures (Gillet et aI., Chapter 17). Accurate determinations of crystal structures provide a basis for understanding thermochemical trends (Chapter 9). Systematics for understanding solid-solution behavior and element partitioning are now available, at least to the uppermost regions of the lower mantle (Fei, Chapter 11). New measurements for dense hydrous phases are beginning to provide answers to fundamental questions regarding their stability of hydrous phases in the mantle (Chapters 3 and 9) and the partitioning of hydrogen and oxygen between the mantle and core (Chapter 8). Novel physical phenomena at ultrahigh pressures One of the key recent findings in high-pressure research is the remarkable effect of pressure on the chemistry of the elements, at conditions ranging from deep metamorphism of crustal minerals (Chapter 2) to "contact metamorphism" at the core-mantle boundary (Chapter 7). Pressure-induced changes in Earth materials represent forefront problems in condensed-matter physics. New crystal structures appear and the chemistry of volatiles changes (Chapter 9). Pressure-induced electronic transitions and magnetic collapse in transition metal ions strongly affect mineral properties and partitioning of major, minor, and trace elements (Chapter 11). Evidence for these transitions from experiment (Chapter 18) and theory (Chapter 19) is important for developing models for Earth formation and chemical differentiation. The conventional view of structurally and chemically complex minerals of the crust giving way to simple, close-packed structures of the deep mantle and a simple iron core is being replaced by a new chemical picture wherein dense silicates, oxides, and metals exhibit unusual electronic and magnetic properties and chemistry. In the end, this framework must dovetail with seismological observations indicating an interior of considerable regional variability, both radially and laterally depending on depth (e.g. Chapters 6 and 7). New classes of global models Information concerning the chemical and physical properties of Earth materials at high pressures and temperatures is being integrated with geophysical and geochemical data to create a more comprehensive global view of the state, processes, and history of the Earth. In particular, models of the Earth's interior are being developed that reflect the details contained in the seismic record but are bounded by laboratory information on the physics and chemistry of the constituent materials. Such "Reference Earth Models" includes the development of reference data sets and modeling codes. Tools that produce seismological profiles from hypothesized mineralogies (Chapters 4 and 5) are now possible, as are tools for testing these models against 'reference' seismological data sets (Chapter 6). These models incorporate the known properties of the Earth, such as crust and lithosphere structure, and thus have both an Earth-materials and seismological orientation. Other planets The Earth cannot be understood without considering the rest of the solar system. The terrestrial planets of our solar system share a common origin, and our understanding of the formation of the Earth is tied to our understanding of the formation of its terrestrial neighbors, particularly with respect to evaluating the roles of homogeneous and heterogeneous processes during accretion. As a result of recent developments in space exploration, as well as in the scope of future planetary missions, we have new geophysical and geochemical data for the other terrestrial planets. Models for the accretion history of the Earth can now be reevaluated in relation to this new data. Experiments on known Earth materials provide the thermodynamic data necessary to calculate the high-pressure mineralogy of model compositions for the interior of Mars and Venus. Notably, the outer planets have the same volatile components as the Earth, just different abundances. Studies of the outer planets provide both an additional perspective on our own planet as well as a vast area of opportunity for application of these newly developed experimental techniques (Chapter 1 and 17). New techniques in the geosciences The utility of synchrotron radiation techniques in mineralogy has exceeded the expectations of even the most optimistic. New spectroscopic methods developed for high-pressure mineralogy are now available for characterizing small samples from other types of experiments. For example, the same techniques developed for in situ studies at high pressures and temperatures are being used to investigate microscopic inclusions such as coesite in high-pressure metamorphic rocks (Chapter 2) and deep-mantle samples as inclusions in diamond (Chapter 3). With the availability of a new generation of synchrotron radiation sources (Chapter 1) and spectroscopic techniques (Chapter 17), a systematic application of new methods, including micro tomographic x-ray analysis of whole rock samples, is now becoming routinely possible. Contributions in technology. Finally, there are implications beyond the geosciences. Mineralogy has historically has led many to conceptual and technical developments used in other fields, including metallurgy and materials science, and the new area of ultrahigh pressure mineralogy continues this tradition. As pointed out in Chapter 1, many highpressure techniques have their origins in geoscience laboratories, and in many respects, geoscience leads development of high-pressure techniques in physics, chemistry, and materials science. New developments include the application of synthetic diamond for new classes of 'large-volume' high-pressure cells. Interestingly, information on diamond stability, including its metastable growth, feeds back directly on efforts to grow large diamonds for the next generation of such high-pressure devices (Chapter 1). Microanalytical techniques, such as micro-spectroscopy and x-ray diffraction, developed for high-pressure research are now used outside of this field of research as well. The study of minerals and mineral analogs under pressure is leading to new materials. As in the synthesis of diamond itself, these same scientific approaches promise the development of novel, technological materials.

Description / Table of Contents: Geochemistry is a science that is based on an understanding of chemical processes in the earth. One of the principal tools available to the chemist for understanding systems at equilibrium is thermodynamics. The awareness and application of thermodynamic techniques has increased at a very fast pace in geosciences; in fact, one may be so bold as to say that thermodynamics in geology has reached the "mature" stage, although much future thermodynamic research is certainly needed. However, the natural processes in the earth are often sluggish enough that a particular system may not reach equilibrium. This observation is being supported constantly by new experimental and field data available to the geochemist e.g. the non-applicability of the phase rule in some assemblages, the compositional inhomogeneities of mineral grains, the partial reaction rims surrounding original minerals, the lack of isotopic equilibration or the absence of minerals (e.g. dolomite), which should be present according to thermodynamics. The need to apply kinetics has produced a large number of papers dealing with kinetics in geochemistry. As an initial response to this growing field, a conference on geochemical transport and kinetics was conducted at Airlie House, VA, in 1973, sponsored by the Carnegie Institution of Washington. The papers there dealt with several kinetic topics including diffusion, exsolution, metasomatism and metamorphic layering. Since 1973 the number of kinetic papers has continued to increase greatly. Therefore, the time is ripe for a Short Course in Kinetics, which brings together the fundamentals needed to explain field observations using kinetic data. It is hoped that this book may serve, not only as a reference for researchers dealing with the rates of geochemical processes, but also as a text in courses on geochemical kinetics. One of us has found this need of a text in teaching a graduate course on geochemical kinetics at Harvard and at Penn State during the past several years. Finally, it is our hope that the book may itself further even more research into the rates of geochemical processes and into the quantification of geochemical observations. The book is organized with a rough temperature gradient in mind, i.e. low temperature kinetics at the beginning and igneous kinetics at the end (no prejudices are intended with this scheme!). However, the topics in each chapter are general enough that they can be applied often to any geochemical domain: sedimentary, metamorphic or igneous. The theory of kinetics operates at two complementary levels: the phenomenological and the atomistic. The former relies on macroscopic variables (e.g. temperature or concentrations) to describe the rates of reactions or the rates of transport; the latter relates the rates to the basic forces operating between the particular atomic or molecular species of any system. This book deals with both descriptions of the kinetics of geochemical processes. Chapter one sets the framework for the phenomenological theory of reaction rates. If any geochemical reaction is to be described quantitatively, the rate law must be experimentally obtained in a kinetically sound manner and the reaction mechanism must be understood. This applies to heterogeneous fluid-rock reactions such as those occurring during metamorphism, hydrothermal alteration or weathering as well as to homogeneous reactions. Chapter 2 extends the theory to the global kinetics of geochemical cycles. This enables the kinetic concepts of stability and feedback to be applied to the cycling of elements in the many reservoirs of the earth. Chapter 3 applies the phenomenological treatment of chapter 1 to diagenesis and weathering. The rate of dissolution of minerals as well as the chemical evolution of pore waters are discussed. The atomistic basis of rates of reaction, transition state theory, is introduced in Chapter 4. Transition state theory can be applied to relate the rate constants of geochemical reactions to the atomic processes taking place. This includes not only homogeneous reactions but also reactions that occur at the surface of minerals. Chapter 5 discusses the theory of irreversible thermodynamics and its application to petrology. The use of the second law of thermodynamics along with the expressions for the rate of entropy production in a system have been used successfully since 1935 to describe kinetic phenomena. The chapter applies the concepts to the growth of minerals during metamorphism as well as to the formation of differentiated layers (banding) in petrology. Chapter 6 describes the phenomenological theory of diffusion both in aqueous solutions and in minerals. In particular, the multicomponent nature of diffusion and its consequence in natural systems is elaborated. Chapter 7 provides the atomistic basis for the rates of reactions in minerals. Understanding of the rates of diffusion, conduction, order-disorder reactions or exsolution in minerals depends on proper description of the defects in the various mineral structures. Chapter 8 provides the kinetic theory of crystal nucleation and growth. While many of the concepts in the chapter can be applied to aqueous systems, the emphasis is on igneous processes occurring during crystallization of a melt. To fully understand both the mineral composition as well as the texture of igneous rocks, the processes whereby new crystals form and grow must be quantified by using kinetic theory. Due to space and time limitations (kinetics!) some topics have not been covered in detail. In particular, the mathematical solution of diffusion or conduction equations is discussed very well by Crank in his book, Mathematics of Diffusion, and so is not covered to a great extent here. The treatment of fluid flow (e.g. convection) is also not covered in the text.

Description / Table of Contents: Although it includes some discussion of chemically complex reactions and the chemographic relationships among amphiboles and other rockforming minerals, most of Volume 9A of Reviews in Mineralogy treats amphiboles and other hydrous pyriboles as isolated systems. In contrast, Volume 9B is dedicated more to an exploration of the social life of amphiboles and the amphibole personality in real rocks and in the experimental petrology laboratory. The chemical complexity of amphibole, which Robinson et al., refer to as "a mineralogical shark in a sea of unsuspecting elements," permits amphiboles to occur in a very wide variety of rock types, under a large range of pressure and temperature conditions, and in association with an impressive number of other minerals. The description of amphibole petrology and of petrologists' attempts to understand amphibole phase relations are therefore not simple matters, as the length of this volume suggests. Although they do not cover every type of amphibole occurrence, it is hoped that the papers in this volume will provide the amphibole student and researcher with an up-to-date summary of the most important aspects of amphibole petrology. Volume 9B, Amphiboles: Petrology and Experimental Phase Relations, was begun in 1981 in preparation for the Short Course on Amphiboles and Other Hydrous Pyriboles presented at Erlanger, Kentucky, October 29 - November 1, 1981, prior to the annual meetings of the Geological Society of America and associated societies. Unfortunately, only the first chapter was in manuscript form at the time of the short course, and publication was delayed by one year.

Description / Table of Contents: Fourteen years ago the American Geological Institute (AGI) sponsored a Short Course on Chain Silicates. At that time, a substantial amount was known about the crystal chemistry and phase equilibria of pyroxenes, and this knowledge has been of fundamental importance in guiding research on pyroxenes in the years following the AGI Short Course. In 1966, single-crystal x-ray diffractometry was well advanced and good crystal structure refinements were available for jadeite, spodumene, hypersthene, c1inoferrosi1ite, orthoferrosi1ite, and omphacite; the distinction between the c1inoenstatite (pigeonite) and diopside (augite) structures had been established, and the structure of protoenstatite was known, although some doubt existed about the space group of protoenstatite. Phase diagrams for several joins in the pyroxene quadrilateral had been published, but often equilibrium had not been established in the experiments and not enough was known about the effects of pressure, oxygen fugacity, and non-quad elements such as aluminum on the phase equilibria. Also, inversion relations of Ca-poor pyroxenes were not well understood, and petrologists had just become aware of the effect of stress on orthoto-clinopyroxene transitions. In 1966 few of us would have guessed how-much new data and new analytical results would become available in the next fourteen years. Although most, if not all, of the important instrumental techniques we use today were available in 1966, the truly spectacular development and application of these techniques did not take place until the Apollo 11 samples and the attendant funding from NASA became available. Pyroxene research has profited immensely from the application of Mossbauer, optical, and infrared spectroscopy, x-ray and electron diffraction, transmission electron microscopy, automated electron microprobes, and digital computers. During these years experimentalists extended the capabilities of their equipment to examine the behavior of pyroxenes under conditions of controlled oxygen fugacity, pressure, and temperature, conditions more nearly like those under which pyroxenes crystallize in natural systems. Looking back, one remembers the excitement of seeing the first lunar samples. We were surprised at the large amounts of pigeonite and the quality of crystals unaffected by water or the presence of sodium. The influence of the lunar program on pyroxene research was extraordinary, and our understanding of pyroxene relationships in terrestrial occurrences benefited tremendously because the lunar pyroxenes provided a basis for comparison with the more complex chemical and structural behavior of terrestrial environments. Probably the most impressive development in the early lunar sample studies was the application of transmission electron microscopy to mineralogy. We were able to see exsolution and other textural features in crystals that looked homogeneous in the optical microscope, thus opening up a wide range of research possibilities that had not existed previously. Advanced crystal growth experiments, detailed phase equilibria, x-ray diffraction at high temperatures, and statistical analyses of microprobe data were all applied to lunar pyroxenes and then extended to terrestrial and meteorite investigations, making this period one of the most productive in history. In the compilation of this volume, an attempt has been made to review the essential aspects of pyroxene research, primarily those of the last ten or fifteen years. Although the largest fraction of pyroxene research has been performed in the U.S.A., significant advances have been made in other countries, particularly in Europe, Japan, Canada, and Australia, with interest and activity in these countries probably growing at a faster rate than in the United States. Recently, Deer, Howie and Zussman (DHZ) published a second edition of their volume in the Rock-Forming Minerals series, Single-Chain Silicates, Vol. 2A (John Wiley, New York, 1978). The present volume is intended to be complementary to DHZ and to provide material covered lightly or not at all in DHZ, such as electron microscopy, spectroscopy, and detailed thermodynamic treatments. However, because the range of pyroxene research has grown so much in recent years, there still are important areas not covered comprehensively in either of these volumes. Some of these areas are kinetics, diffusion, crystal defects, deformation, and nonsilicate pyroxene crystal chemistry. Because of these omissions and because this volume is intended for use with the MSA Short Course on Pyroxenes to be held at Emory University in conjunction with the November, 1980 meeting of the Society, a Symposium on Pyroxenes was organized by J. Stephen Huebner for the meeting that is designed to present the latest research results on several different topics, including those above. With DHZ, this volume, and publications from the Symposium, the student of pyroxenes should be well-equipped to advance our knowledge of pyroxenes in the decades ahead.

Description / Table of Contents: In 1978 the Short Course Committee decided to forego activities because the annual meeting of the M.S.A. was held together with the Mineralogical Association of Canada, who sponsored a Short Course in Uranium Deposits and published a book by the same title. A number of mineralogists expressed regret at the potential loss of momentum in MSA's production of this series and encouraged several authors of this book to press on with their idea of publishing Volume 5 -- Orthosilicates. Work was begun in 1978; however, without the pressure of a deadline associated with presenting the material to students of a short course at the annual meeting, procrastination set in and the first edition of this volume was not completed until September 1980 (with the exception of Chapters 1 and 2 which were submitted in their present form in 1978). In the meantime Volume 6, Marine Minerals, appeared in time for the annual meeting of the Society and a Short Course in San Diego in November 1979. In 1980 the Council of the MSA changed the name of the published volumes from SHORT COURSE NOTES to REVIEWS in MINERALOGY in order to more aptly describe the material contained in this now highly successful series. The First Edition of Orthosilicates was the first volume to appear under the REVIEWS banner. This is the Second Edition of Orthosilicates. It contains an updating and minor revisions of Chapters 3 through 10 (only) and two new chapters originally intended for the First Edition. The intent of this volume is to emphasize the crystal chemistry and related physical properties of the major rock-forming orthosilicates. Though in some chapters more attention is given to phase equilibria and paragenesis than in others, these are for the most part cursorily treated with references to the more important papers and to review articles (also see Deer, Howie and Zussman, 1962, Rock-forming Minerals, Vol. 1, Ortho- and Ring Silicates). Some confusion will inevitably result from the definition of the term used as the title for this volume. In Chapter 1 Liebau (p. 14) says that "silicates containing (SiO4) groups should be called monosilicates rather than orthosilicates or nesosilicates." The editor chose not to adopt Liebau's terminology for the title, because monosilicate is not yet widely accepted (although it might well be). To set manageable boundaries for the scope of the First Edition of Orthosilicates, an editorial option was exercised in rejecting as "orthosilicates" those minerals with both (SiO4) tetrahedra and (Si2O7) groups (zoisite, epidote, vesuvianite, etc.), as well as those with (SiO4) tetrahedra that are polymerized to other tetrahedra by sharing corners with (BeO4), (BO4), (A1O4), (ZnO4), etc. However, as mentioned in the Foreword, Chapter 13 has been added to the Second Edition to correct for the latter omission. Chapter 12 contains very brief descriptions of the paragenesis and crystal chemistry of many orthosilicates that fit the description stated in the Preface (p. iv). It may be used as an index, because all orthosilicates are listed alphabetically, including those discussed in Chapters 2 through 11.

Description / Table of Contents: This volume of was prepared in conjunction with the Mineralogical Society of America Short Course on Amphiboles and Other Hydrous Pyriboles, Fall, 1981. Had it not been split into two volumes, 9A and 9B, it would have resembled in some respects the Manhattan telephone directory (it is hoped, however, that the content is more readable and relevant to the geological sciences). The length of this collection of papers appears to result from a combination of phenomena. The amphiboles themselves must accept most of the blame: their structural complexity and resulting chemical variability and diversity of petrologic behavior preclude brief description. In addition, while some of these papers are relatively brief summaries of the published literature that easily and quickly can be consumed by students, others are exhaustive (and lengthy) discourses that may not be digestible in one sitting by even the most dedicated amphibole researcher. Finally, it appears that some geologists, probably with justification, love amphiboles so much that they would never have stopped writing had there been no publication deadline. The extremely short time between the preparation of papers and publication of Reviews in Mineralogy and the authors' intimate knowledge of their fields ensure that the papers reflect the very latest in research results. The rapid production of the "Reviews," however, inevitably results in a few errors that might be caught in a more leisurely publication process; the editors apologize for any such errors that are included in this volume. In addition, the sequence of presentation of papers reflects not only the editors' notions of order in the amphibole universe, but also somewhat the order in which papers were received. Although a collection of reviews of this sort cannot claim to give exhaustive coverage to all aspects of a topic, it is hoped that the papers presented here do review most of the important areas of active amphibole research. The papers have been split in a somewhat arbitrary fashion into Volume 9A, Amphiboles and Other Hydrous Pyriboles - Mineralogy, and Volume 9B, Amphiboles: Petrology and Experimental Phase Relations. Everyone is encouraged to purchase both volumes, however, because there is a hefty dose of petrology in 9A (witness the paper by Thompson, for example) and not a little mineralogy in 9B.

Description / Table of Contents: The development of modern isotope geochemistry is without doubt attributed to the efforts, begun in the 1930's and 1940's, of Harold Urey (Columbia University and the University of Chicago) and Alfred O.C. Nier (University of Minnesota). Urey provided the ideas, theoretical foundation, the drive, and the enthusiasm, but none of this would have made a major impact on Earth Sciences without the marvelous instrument developed by Nier and later modified and improved upon by Urey, Epstein, McKinney, and McCrea at the University of Chicago. Harold Urey's interest in isotope chemistry goes back to the late 1920's when he and I.I. Rabi returned from Europe and established themselves at Columbia to introduce the then brand-new concepts of quantum mechanics to students in the United States. Urey, of course, rapidly made an impact with his discovery of deuterium in 1932, the 'magical' year in which the neutron and positron were also discovered. Urey followed up his initial important discovery with many other experimental and theoretical contributions to isotope chemistry. During this period, Al Nier developed the most sophisticated mass spectrometer then available anywhere in the world, and made a series of surveys of the isotopic ratios of as many elements as he could. Through these studies, which were carried out mainly to obtain accurate atomic weights of the various elements, Nier and his co-workers clearly demonstrated that there were some fairly large variations in the isotopic ratios of the lighter elements. However, the first inkling of a true application to the Earth Sciences didn't come until 1946 when Urey presented his Royal Society of London lecture on 'The Thermodynamic Properties of Isotopic Substances' (now a classic paper referenced in most of the published papers on stable isotope geochemistry). With the information discovered by Nier and his co-workers that limestones were about 3 percent richer in 18O than ocean water, and with his calculations of the temperature coefficient for the isotope exchange reaction between CaCO3 and H2O, Urey realized that it might be possible to apply these concepts to determining the paleotemperatures of the oceans. Urey was never one to overlook important scientific problems, regardless of the field of scientific inquiry involved. In fact, he always admonished his students to 'work only on truly important problems!' Urey, then a Professor at the University of Chicago, decided to take a hard look into the experimental problems of developing an oxygen isotope paleotemperature scale. Although the necessary accuracy had not yet been attained, the design of the Nier instrument seemed to offer a good possibility, with suitable modifications, of making the kinds of precise measurements necessary for a sufficiently accurate determination of the 18O/16O ratios of both CaCO3 (limestone) and ocean water. Enormous efforts would be required to do this, because even if all the mass spectrometric problems could be solved, every analytical and experimental procedure would have to be invented from scratch, including the experimental calibration of the temperature coefficient of the equilibrium fractionation factor between calcite and water at low temperatures. To carry out this formidable study, Urey gathered around himself a remarkable group of students, postdoctoral fellows, and technicians, as well as his paleontologist colleague Heinz Lowenstam. With Sam Epstein at the center of the effort and acting as the principal driving force, the rest, as they say, 'is history.' The marvelous nature of the Nier-Urey mass spectrometer is attested to by the fact that the basic design is still being used, and that there are now hundreds of laboratories throughout the world where this kind of work is being done. For example, the original instrument built by Sam Epstein and Chuck McKinney at Caltech in 1953 is still in use and has to date produced more than 90,000 analyses. University, government, and industrial laboratories have found these instruments to be an indispensable tool. Enormous and widely varying application of the original concepts have been made throughout the whole panoply of Earth, Atmospheric, and Planetary Sciences. In the present volume we concentrate on an important sub-field of this effort. That particular sub-field was inaugurated in Urey's laboratories at Chicago by Peter Baertschi and Sol Silverman, who developed the fluorination technique for extracting oxygen from silicate rocks and minerals. This technique was later refined and improved in the late 1950's by Sam Epstein, Hugh Taylor, Bob Clayton, and Toshiko Mayeda, and has become the prime analytical method for studying the oxygen isotope composition of rocks and minerals. The original concepts and potentialities of high-temperature oxygen isotope geochemistry were developed by Samuel Epstein and his first student, Bob Clayton. Also, Bob Clayton, A.E.J. Engel, and Sam Epstein carried out the first application of these techniques to the study of ore deposits. The first useful experimental calibrations of the high-temperature oxygen isotope geothermometers quartz-calcite-magnetite-H2O were carried out initially by Bob Clayton, and later with his first student Jim O'Neil. In the meantime, Sam Epstein and his second student, Hugh Taylor, had begun a systematic study of 18O/16O variations in igneous and metamorphic rocks, and were the first to point out the regular order of 18O/16O fractionations among coexisting minerals, as well as their potential use as geochemical tracers of petrologic processes. During this period, a parallel development of sulfur isotope geochemistry was being carried out by Harry Thode and his group at McMaster University in Canada. They developed all the mass spectrometric and extraction techniques for this element, and also provided the theoretical and experimental foundation for understanding the equilibrium and kinetic isotope chemistry of sulfur. Starting from these beginnings, most of which took place either at the University of Chicago, Caltech, or McMaster University (but also with important input from Irving Friedman's laboratory at the U.S. Geological Survey, from Athol Rafter's laboratory in New Zealand, and from Columbia, Penn State, and the Vernadsky Institute in Moscow), there followed during the decades of the late 60's, 70's, and early 80's the development and maturing of the sub-field of high-temperature stable isotope geochemistry. This discipline is now recognized as an indispensable adjunct to all studies of igneous and metamorphic rocks and meteorites, particularly in cases where fluid-rock interactions are a major focus of the study. The twin sciences of ore deposits and the study of hydrothermal systems, both largely concerned with such fluid-rock interactions, have been profoundly and completely transformed. Virtually no issue of Economic Geology now appears without 3 or 4 papers dealing with stable isotope variations. No one writes papers on the development of the hydrosphere, hydrothermal alteration, ore deposits, melt-fluid-solid interactions, etc. without taking into account the ideas and concepts of stable isotope geochemistry. Although the present volume represents only a first effort to fill the need for a general survey of this sub-field for students and for workers in other disciplines, and although it is still obviously not completely comprehensive, it should give the interested student an idea of the present 'state-of-the-art' in the field. It should also provide an entry into the pertinent literature, as well as some understanding of the basic concepts and potential applications. Some thought went into the arrangement and choice of chapters for this volume. The first three chapters focus on the theory and experimental data base for equilibrium, disequilibrium, and kinetics of stable isotope exchange reactions among geologically important minerals and fluids. The fourth chapter discusses the primordial oxygen isotope variations in the solar system prior to formation of the Earth, along with a discussion of isotopic anomalies in meteorites. The fifth chapter discusses isotopic variations in the Earth's mantle and the sixth chapter reviews the variations in the isotopic compositions of natural waters on our planet. In Chapters 7, 8, 9 and 10, these isotopic constraints and concepts are applied to various facets of the origin and evolution of igneous rocks, bringing in much material on radiogenic isotopes as well, because these problems require a multi-dimensional attack for their solution. In Chapters 11 and 12, the problems of hydrothermal alteration by meteoric waters and ocean water are considered, together with discussions of the physics and chemistry of hydrothermal systems and the 18O/16O history of ocean water. Finally, in Chapters 13 and 14, these concepts are applied to problems of metamorphic petrology and ore deposits, particularly with respect to the origins of the fluids involved in those processes. It seems clear to us (the editors) that this sub-field of stable isotope geochemistry can only grow and become even more pertinent and dominant in the future. One of the most fruitful areas to pursue is the development of microanalytical techniques so that isotopic analyses can be accurately determined on ever smaller and smaller samples. Such techniques would open up vast new territories for exploitation in every aspect of stable isotope geochemistry. Exciting new methods have recently been developed whereby a few micromoles of CO2 and SO2 can be liberated for isotopic analyses from polished sections of carbonates and sulfides by laser impact. There are also new developments in mass spectrometry like RIMS (resonance ionization mass spectrometry), Fourier transform mass spectrometry and the ion microprobe that offer considerable promise for these purposes. Stable isotope analyses of large-sized samples (even those that must be obtained by reactions of silicates with fluorinating reagents) have now become so routine and so rapid that they represent an 'easy' way to gather a lot of data in a hurry. In fact 'mass production' techniques for rapidly processing samples are starting to become prevalent, so much so that one of the biggest worries in the future may be that a flood of data will overwhelm us and outstrip our abilities to carefully define and carry out sampling strategies, as well as to think carefully and in depth about the data. An organized system of handling the D/H, 13C/12C, 15N/14N, 18O/16O, and 34S/32S data, and/or a computerized data base that could be manipulated and added to would be a useful path to follow in the future, particularly if it were integrated into a larger data base containing radiogenic isotope data, major- and trace-element analyses, electron microprobe data, x-ray crystallographic data, and petrographic data (particularly modal data on mineral abundances in the rocks).

Description / Table of Contents: This book reviews current thinking on the fundamental processes that control chemical weathering of silicates, including the physical chemistry of reactions at mineral surfaces, the role of experimental design in isolating and quantifying these reactions, and the complex roles that water chemistry, hydrology, biology, and climate play in weathering of natural systems. The chapters in this volume are arranged to parallel this order of development from theoretical considerations to experimental studies to characterization of natural systems. Secondly, the book is meant to serve as a reference from which researchers can readily retrieve quantitative weathering rate data for specific minerals under detailed experimental controls or for natural weathering conditions. Toward this objective, the authors were encouraged to tabulate available weathering rate data for their specific topics. Finally this volume serves as a forum in which suggestions and speculations concerning the direction of future weathering research are discussed. The comprehensive nature of the volume provides opportunities to address important temporal and spacial issues that often separate the work and thinking of investigators working on specific aspects of chemical weathering. As has become apparent in assembling this volume, a number of important issues related to chemical weathering are unresolved. No effort was made to reach a consensus on these issues. Divergences in opinion were accepted between various authors and are apparent in the chapters of this volume.

Description / Table of Contents: At the time of the first printing (1996), interest in the element boron was growing rapidly. We felt that it was an opportune moment to ask investigators active in research on boron to review developments in their respective fields so that readers could learn what was-and wasn't-known about boron and its minerals, geochemistry and petrology. Since 1996, interest in boron has, if anything, increased, and continued demand for the Reviews in Mineralogy "boron bible" has motivated the Mineralogical Society of America to reprint the volume. Demand is reflected in citations, and according to ISI's Science Citation Index, the number of citations since publication to the volume is about 380, with some individual chapters having been cited as many as 44 times. In preparation for this printing, authors of 15 of the 19 original chapters have updated, corrected or added to their chapters within the constraints that no pages be added. Most addenda are bibliographies of literature published since 1996; a few also include summaries of significant findings. Addenda for each chapter follow the chapter, except for those for Chapters 1 and 2, which are merged onto pages 115-116 and 385. A table of new B-minerals since 1996 is given on p. 28, and many modifications were made to the table (p. 7-27) of B-minerals known prior to 1996 (corrections to formulae, mineral names, localities, etc.). Similar up-datings of Table 1 (p. 223) in Chapter 5 and numerous tables in Chapter 9 (p. 387) were undertaken, and Figure 15 in Chapter 11 (p. 619), which-embarrassingly-was missing from the first printing, has been supplied. Addenda to Chapter 13 are introduced on p. 744 and completed on p. 863 and 864. The following salient developments in research related to B are mentioned in the addenda: New minerals. Twenty-two boron minerals have been or are about to be described, and four more have been approved by the International Mineralogical Association, representing an increase of 10%, comparable to the increase in the number of all new minerals described during the same period (Anovitz and Grew, Chapter 1) Tourmaline group. In addition to four new tourmaline species, a new classification has been proposed. Another tourmaline, olenite, has been shown to contain substantial amounts of excess B in tetrahedral coordination, a finding that has revolutionized our view of tourmaline crystal chemistry (Werding and Schreyer, Chapter 3; references in addendum to Henry and Dutrow, Chapter 10). Boron isotopes. New techniques for measuring isotope ratios using secondary ion mass spectroscopy (SIMS) with the ion microprobe open up new opportunities for in situ analyses of individual grains and fluid inclusions (Hervig, Chapter 16). Boron isotopes have found applications in paleoceanography and thus add to the tools available for the study of past climates (Palmer and Swihart, Chapter 13). One of the major questions facing the use of hydrogeochemical models is whether or not they can be used with confidence to predict future evolution of groundwater systems. There is much controversy concerning the validity and uncertainties of non-reactive fluid flow systems. Adding chemical interaction to these flow models only confounds the problem. Although such models may accurately integrate the governing physical and chemical equations, many uncertainties are inherent in characterizing the natural system itself. These systems are inherently heterogeneous on a variety of scales rendering it impossible to know precisely the many details of the flow system and chemical composition of the host rock. Other properties of natural systems such as permeability and mineral surface area, to name just two, may never be known with any great precision, and in fact may be unknowable. Because of these uncertainties, it remains an open question as to what extent numerical models of groundwater flow and reactive transport wilI be useful in making accurate quantitative predictions. Nevertheless, reactive transport models should be able to predict the outcome for the particular representation of the porous medium used in the model. Finally, it should be mentioned that numerical models are often our only recourse to analyze such environmental problems as safe disposal of nuclear waste where predictions must be carried out over geologic time spans. Without such models it would be impossible to analyze such systems, because they involve times too long to perform laboratory experiments. The results of model calculations may affect important political decisions that must be made. Therefore, it is all the more important that models be applied and tested in diverse environments so that confidence and understanding of the limitations and strengths of model predictions are understood before irreversible decisions are made that could adversely affect generations to come.

Description / Table of Contents: With the ever increasing spatial resolution in the characterization of microstructures, textures and chemical as well as isotopic patterns and the continuously improving sensitivity and precision in mineral chemical and isotopic analysis, increasing evidence has emerged indicating that phase relations in rocks from high-temperature environments may be modified during exhumation and cooling and that the original equilibrium phase relations may not have been preserved or that equilibrium may never have been attained fully even at high temperatures. This volume accompanies an EMU School intended bring contemporary research on mineral reaction kinetics to the attention of young researchers and to put it into the context of recent developments in related disciplines. The school and the accompanying volume cannot give a comprehensive review of the current state of geomaterials research. Rather a selection of topics, methods and concepts, which the contributors deem currently most relevant and instructive, is presented. The aim is to provide a methodologically sound insight into the theoretical foundations of mineral reaction kinetics, to help students to become acquainted with contemporary methods in experimentation and analytical techniques, and to give worked examples that illustrate recent advances in geoscience based on an improved characterization and understanding of mineral and rock systems.