ALBERT

Description: Fuel efficiency in aeronautics, for fuel conservation in general as well as for its effect on commercial aircraft operating economics is considered. Projects of the Aircraft Energy Efficiency Program related to propulsion are emphasized. These include: (1) engine component improvement, directed at performance improvement and engine diagnostics for prolonged service life; (2) energy efficient engine, directed at proving the technology base for the next generation of turbofan engines; and (3) advanced turboprop, directed at advancing the technology of turboprop powered aircraft to a point suitable for commercial airline service. Progress in these technology areas is reported.

Description: Two unique meteorites were identified by means of a mineralogical examination of the smaller-sized Yamato achondrites. Yamato-74130 is the most iron-rich ureilite with Na, Cr-rich augite instead of pigeonite. Yamato-74160 was extensively recrystallized, but the composition and proportion of olivine, orthopyroxene, augite, and plagioclase is consistent with LL7 chondrites. ALHA77005 is a unique achondrite with olivine, possibly three pyroxene assemblages, and maskelynite. These meteorites provide evidence that there may be other 'thermalized' asteroids than the howardite parent body. Detailed petrologic descriptions of the unique achondrites, recrystallized diogenite Yamato-74013, and the rapidly cooled eucrite Yamato-74450 with pyroxene phenocrysts are given. It is inferred from the bulk chemistry and the mineralogical reexamination of Yamato-75028 that it is composed of the H5-type clasts and chondrule-rich H(L)3-like matrix with the H5 fragments. A close relationship in the collisional evolution of some asteroids with these materials is inferred.

Description: Data have been accumulated from a series of studies in which men have been subjected to weightlessness in orbital space flight for periods of up to 12 weeks. These data are used to predict the long term consequences of weightlessness upon the skeletal system. Space flight induced a loss of calcium which accelerated exponentially from about 50 mg/d at the end of 1 week to approx. 300 mg/d at the end of 12 weeks. The hypercalciuria reached a constant level within 4 weeks while fecal calcium losses continued to increase throughout the period of exposure. This apparent diminution of gastrointestinal absorptive efficiency was accompanied by a slight decline in the plasma level of parathyroid hormone and a slight elevation in the plasma level of calcium and phosphorus. Although losses in mineral from the calcaneus were closely correlated with the calcium imbalance, no changes were detected in the mineral mass of the ulna and radius. From the data presented it is concluded that the process of demineralization observed in space flight is more severe than would be predicted on the basis of observations in immobilized, bed rested, or paralyzed subjects. It is, moreover, suggested that the process may not be totally reversible.

Description: This review describes the renal-endocrine mechanisms related to the early losses of fluid-electrolytes from the body during weightlessness as well as their contribution to longer term adaptation of fluid-electrolyte balance. The hypotheses presented were generated by a systematic analysis of body fluid and renal dynamics observed under conditions of actual and simulated spaceflight. These have increased our understanding of the effects of acute headward fluid shifts on renal excretion, the factors promoting excess sodium excretion and the regulation of extracellular fluid composition.

Description: The third in a series of Spacelab Mission Development tests was conducted at the Johnson (correction of Johnston) Space Center as a part of the development of Life Sciences experiments for the Space Shuttle era. The latest test was a joint effort of the Ames Research and Johnson Space Centers and utilized animals and men for study. The basic objective of this test was to evaluate the operational concepts planned for the Space Shuttle life science payloads program. A three-man crew (Mission Specialist and two Payload Specialists) conducted 26 experiments and 12 operational tests, which were selected for this 7-day mission simulation. The crew lived on board a simulated Orbiter/Spacelab mockup 24 hr a day. The Orbiter section contained the mid deck crew quarters area, complete with sleeping, galley and waste management provisions. The Spacelab was identical in geometry to the European Space Agency Spacelab design, complete with removable rack sections and stowage provisions. Communications between the crewmen and support personnel were configured and controlled as currently planned for operational shuttle flights. For this test a Science Operations Remote Center was manned at the Ames Research Center and was managed by simulated Mission Control and Payload Operation Control Centers at the Johnson Space Center. This paper presents the test objectives, description of the facilities and test program, and the results of this test.

Description: The weathering of silicate rocks and minerals, an important concern of geologists and geochemists for many years, traditionally has been approached from strictly physical and chemical points of view. Biological effects were either unrecognized, ignored, or were mentioned in passing to account for such phenomena as the accumulation of organic matter in sediments or the generation of reducing environments. A major exception occurred in soil science where agricultural scientists, studying the factors important in the development of soils and their ability to nourish and sustain various crops, laid the foundation for much of what is known of the biological breakdown of silicate rocks and minerals. The advent of the space age accelerated the realization that many environmental problems and geochemical processes on Earth can only be understood in terms of ecosystems. This in turn, spurred renewed interest and activity among modem biologists, geologists and soil scientists attempting to unravel the intimate relations between biology and the weathering of silicate rocks and minerals of the earth's surface.

Description: Ordinary Rayleigh-Schroudinger perturbation theory with Moller-Plesset (RSMP) partitioning is used to calculate second- and third-order correlation corrections to the CHF polarizability and dipole moment of the water molecule by a finite-field procedure. Pade approximants are found to be useful in accelerating the convergence of the property perturbation expansions. Field-induced polarization functions suitable for polarizability calculations are determined. The average polarizability calculated, neglecting vibrational averaging, with Dunning's (9s5p/4s-4s2p/2s) contracted GTO basis set augmented by field-induced lslp2d/lp polarization functions is within 3 per cent of the experimental result. Correlation corrections to the dipole moment and polarizability of the water molecule calculated by the finite-field RSMP and single + double excitation CI(SDCI) methods for the same basis set are found to be in close agreement. The RSMP approach has the advantages of being size-consistent and of being capable of greater efficiency than the SCDI method. Comparative calculations carried out using Epstein-Nesbet partitioning show that through third order RSEN correlation perturbation expansions for the dipole moment and polarizability are less rapidly convergent than RSMP expansions. However, reasonable accord with RSMP results can be achieved by using Pade approximants to accelerate the convergence of RSEN energy perturbation expansions. The convergence of RSMP property correlation expansions based on the zeroth-order uncoupled-Hartree-Fock (UCHF) and coupled-Hartree-Fock (CHF) approximations are compared through third order. Whereas the CHF + RSMP expansions are for practical purposes fully converged, the UCHF + RSMP expansions are not adequately converged.

Description: A research data-gathering system being developed for inflight measurement of direct and nearby lightning strike characteristics is described. Wideband analog recorders used to record the lightning scenario are supplemented with high-sample-rate digital transient recorders with augmented memory capacity for increased time resolution of specific times of interest. The endless-loop data storage technique employed by the transient recorders circumvents problems associated with oscilloscopic techniques and allows unattended operation. System integrity and immunity from induced effects is accomplished by fiber-optics signal-transmission links, shielded system enclosures, and the use of a dynamotor for power system isolation.

Description: The structure and strength of the magnetic fields of the Sun's active regions were studied to obtain information for short term forecasting. Intensity forecasts were then made using the information obtained on the gradients of the magnetic fields between sunspots of opposite polarity. A comparison of flare forecasting methods is presented.

Description: Long term and short term HF propagation prediction service is described. The long term prediction method is computer based. The short term prediction method is still a manual method which relies mainly on a number of continuous field strength recordings and on the forecaster's ability to interpret the recordings and to combine this information with all available solar-geophysical data. Examples of the predictions are given and are compared with actually observed HF propagation conditions.

Description: The metallurgical processing experiments on Skylab were chosen to: (1) elucidate the unknown effects of a low gravity environment on certain processes; (2) determine to what extent nongravitational driven flows operate in the processes; and (3) explore the possibilities of containerless solidification. Welding and brazing experiments were conducted to provide an understanding of solidification mechanics in a weightless environment.

Description: A list of the present state of knowledge in materials processing is presented. The fluid behavior in a low gravity environment is summarized. Materials processing in the Space Transportation System facility is discussed. Prospects for space commercialization are reported.

Description: The Apollo Soyuz Test Program is described. A modification of the Skylab furnace was developed for the ASTP mission that had a maximum temperature of 1200 C, a programmed cool down to give more uniform growth rates, and a He quench system to shorten the time required to reach allowable touch temperature. The Space Processing Applications Rocket (SPAR) program was initiated to provide some continuity in flight experimentation. Liquid mixing, immiscible alloy solidification, composite materials, bubbles and dispersed particles during solidification, and containerless processing techniques were studied in the SPAR program.

Description: Simulation studies were undertaken to determine the feasibility of a nuclear photon pumped excimer laser using a system where high pressure Xe is bombarded with electrons and protons to form 1720 A. Primary measurements included conversion efficiency and gain vs time measurements.

Description: Nuclear pumped laser technology was evaluated as a possible future weapons contender. It was determined that in order to become a primary weapon the following engineering problems must be solved: shielding, heat dissipation, high efficiency fixed focus pumping, good beam quality, and thermal blooming.

Description: Using a partially nuclear excited xenon flashlamp to pump an iodine laser, laser pulse shapes were analyzed with and without nuclear flashlamp augmentation. The pulse shapes indicate that the deposition of nuclear energy is equally as effective as electrical energy deposition in producing laser pulse energy output. The amplification of the E-beam pumped CF3I was measured at pressures of several atmospheres. Preliminary data shows that, for a part of the iodine laser pulse, amplification of almost a factor of two is measured. This measurement indicates that the gain in an E-beam pumped CF3I is an order of magnitude greater than in the coaxial laser tube.

Description: A technology assessment of CO2 and CO nuclear pumped laser experiments is presented.

Description: A model for an indirectly nuclear pumped laser experiment was developed. The apparatus consists of the usual cylindrical neutron moderator enclosing a gas filled quartz cell. The quartz cell in this case has two concentric compartments; the larger output compartment is filled with He-3 and fluorescent gases which are coupled radiatively to the inner compartment which is filled with a lasing gas for efficient optical pumping. The fluorescent gas in this study was a mixture of Ar, Kr and F2. Perfluoroalkyliodide was chosen as the lasant material of the inner compartment. The degree of photoabsorption in the lasant gas was calculated. The kinetic efficiencies of various gas combinations in the outer fluorescence tube were then evaluated in order to maximize the fluorescence output in the iodine pump band.

Description: The recent experiment and theoretical results obtained for noble gas nuclear laser systems are presented. It is shown that the noble gas lasers are among the easiest systems to pump by nuclear excitation and as a result, all of the noble gases except He have lased under nuclear excitation. The noble gas systems are not ideal for high-power applications but they do give valuable insight into the operation and pumping mechanisms associated with nuclear lasers. At present, the Ar-Xe system is the best noble gas candidate for (U-235)F6 pumping. It appears that the quenching of Ar-Xe lasing is a result of the fluorine and not the uranium or fission fragments themselves. Thus, to achieve lasing with UF6, a fluorine compatible system must be found.

Description: Results of atomic carbon and XeF* nuclear pumping experiments are briefly discussed. Features of escimer lasers important for nuclear pumping are included.

Description: The development of nuclear pumped lasers with improved efficiency, energy storage capability, and UF6 volume pumping is reviewed. Results of nuclear pumped laser experiments using a TRIGA-type pulsed reactor are outlined.

Description: The vacuum-ultraviolet spectroscopy system and MCFIG capsule were filled with a He-3:Ar:Xe:Br (534:195:12:6) torr mixture and irradiatied by a CW flux of 17 x 10 to the 11th power neutrons/sq cm sec. The XeBr* emission was observed, but the Br2 emission normally observed in argon-bromine mixtures predominates. This spectrum is typical of these mixtures with XeBr* probably peaking with 0.1 percent Bromine in 2 atmosphere argon with 2 percent xenon. The addition of a large partial pressure of He-3 produces additional unknowns. The typical vibrational structure of XeBr* was not observed. Sapphire emission continuums were present. Energy deposition was 0.43 watts and the capsule output under the XeBr* and Br2 bands was 0.0016 watts, giving an efficiency of 0.37 percent.

Description: The rate at which UF6 decomposes into UF5 and UF4 was determined as a function of neutron fluence. To study UF6 decomposition rate, an absorption cell for VUV and the associated VUV spectroscopy system was used to measure UF6 while under irradiation. The cell contains 50 torr of UF6 at room temperature to insure that the UF6 is in a gaseous state. It is shown that by determining the absorption coefficient below 2100A for UF6, above 2100A for F2, and at 4100A for cell degradation, UF6 decomposition can be measured at a neutron flux of 10 to the 12th power/sq cm for 72 continuous hours.

Description: The results of a study on the CW nuclear pumped lasing of the He-Ne system are presented. Preliminary experiments measured single pass gain for the 6328.2A laser transition at neutron fluxes up to 1 x 10 to the 14th power neutrons/sq cm sec. Peak gain for a 300 torr (He-3)-Ne (5:1 mixture) was found to be 8.84 dB/meter at a 2 x 10 to the 12th power neutrons/sq cm sec neutron flux. Further experiments measured the gain in the flux region from one million to 2 x 10 to the 12th power neutrons/sq cm sec. In addition, gain vs. probe laser intensity at various neutron fluxes was measured. These measurements resulted in the construction of a laser cavity and the subsequent CW nuclear pumped lasing at 6328.2A in (He-3)-Ne. Experiments were also carried out on the 3.39 micrometer superradiant line in (He-3)-Ne. On three separate occasions, at two different facilities, lasing was observed. Although (He-3)-Ne was found to have the lowest threshold for lasing found so far, it also had the lowest output power on the order of tens of microwatts.

Description: The He-3 (n,p)T reaction was examined as an energy source for a CO2 laser. For this purpose He-3 was added to a functioning CO2 electrically excited laser. Initially the laser was run electrically with 12 torr total pressure. The gas mixture was 1:1:8, CO2:N2:He. At zero reactor power, the laser was tested in place next to the core of the Georgia Tech. Research Reactor. After verification of laser action He-3 was added to the system. The He-3 partial pressures of 10 torr, 50 torr, and 300 torr were added in three separate reactor runs. Reactor power ranged from zero to 5 million watts, which corresponds to a peak flux of 10 to the 14th power/sq cm. At reactor powers greater than 10 kW, gain of up to 30 percent was shown. However, indications are this may be due to gamma excitation rather than caused by the He-3 (n,p)T reaction. These results do agree with the data of past CO2 nuclear pumped laser experiments.

Description: The mechanism of excitation of laser gases by fast ions (triton, proton, or fission fragments) and especially any role UF6 might play in radiative deexcitation of these gases were investigated. Population densities of excited important for laser action were obtained. Nuclear pumped CW-laser systems, especially He-Ne and CO2, were studied using steady state reactors. It was demonstrated that He-Ne lases in a CW-mode with nuclear pumping at both the red and the infrared transition. The infrared transition was observed to be superradiant.

Description: Propulsion needs of high performance military aircraft are discussed. Inlet performance, nozzle performance and cooling, and afterburner performance are covered. It is concluded that nonaxisymmetric nozzles provide cleaner external lines and enhanced maneuverability, but the internal flows are more complex. Swirl afterburners show promise for enhanced performance in the high altitude, low Mach number region.

Description: Propulsion problems and advanced technology requirements of VTOL aircraft are discussed. Specific topics covered include inlets with high angle of attack capability, rapid thrust modulation fans, and propulsion-system/aircraft-control integration.

Description: Research on hydrogen fueled scramjet engines for hypersonic flight is reviewed. Component developments, computational methods, and preliminary ground tests of subscale scramjet engine modules at Mach 4 and 7 are emphasized. Airframe integration, structures, and flow diagnostics are also discussed. It is shown that mixed-mode perpendicular and parallel fuel injection controls heat release over a wide Mach range and the fixed geometry inlet gives good performance over a wide range of Mach numbers.

Description: An overview of engine control technology is presented with emphasis on gas turbine engine controls. The role of the government, and NASA in particular, in advancing this technology is discussed.

Description: Propulsion concepts for commercial supersonic transports are discussed. It is concluded that variable cycle engines, together with advanced supersonic inlets and low noise coannular nozzles, provide good operating performance for both supersonic and subsonic flight. In addition, they are reasonably quiet during takeoff and landing and have acceptable exhaust emissions.

Description: Research on bearings, gears, seals, and rotor dynamics (specifically high speed balancing and dampers) is presented. The research pertains to problems in both aircraft turbine engines and helicopter transmissions.

Description: Some of the efforts made in applying technologically new tools to today's propulsion measurement problems are described. They include: (1) a blade-tip clearance system; (2) a pulsed thermocouple system used to measure gas temperature with a thermocouple at temperatures above the melting point of the thermocouple; (3) an optical technique for measuring blade flutter; (4) a probe for dynamic flow and flow angle measurement; and (5) a laser anemometer system for rapidly mapping the flow profiles between the blades of a rotating compressor.

Description: A technology assessment of turbomachinery is presented. The design of the fan, compressor, and turbine components for future advanced aircraft engines is discussed. Basic flow characteristics in compressors and turbines and the heat transfer phenomena in cooled turbines are also discussed.

Description: Major solution techniques for internal computational fluid mechanics are discussed and some examples are presented. The major steps involved in developing a large computer code are then discussed.

Description: Potential changes in jet aircraft fuel specifications due to shifts in supply and quality of refinery feedstocks are discussed with emphasis on the effects these changes would have on the performance and durability of aircraft engines and fuel systems. Combustion characteristics, fuel thermal stability, and fuel pumpability at low temperature are among the factors considered. Combustor and fuel system technology needs for broad specification fuels are reviewed including prevention of fuel system fouling and fuel system technology for fuels with higher freezing points.

Description: Materials and structures performance limitations, particularly for the hot section of the engine in which these limitations limit the life of components, are considered. Failure modes for components such as blades, vanes, and combustors and how they are affected by the environment for such components are discussed. Methods used to improve the materials used for such components are: (1) application of directional structures to turbine components for high strength at high temperatures; (2) improved coatings to increase oxidation and corrosion resistance; (3) increase strength and stiffness with reduced weight by applying higher specific properties of composite materials; and (4) cost effective processing such as near net shape powder methods applied to disks. Life prediction techniques developed to predict component life accurately in advance of service and progress in improving the intermediate and cold section components of turbine engines are covered.

Description: The turbofan engine's noise-producing components are discussed in terms of efficient and economical noise reduction techniques that do not penalize the engine performance or weight significantly. Specific topics covered include fan noise, acoustic suppression, jet noise technology, combustor noise, and aircraft noise prediction.

Description: Control of the gaseous pollutant emissions of aircraft engines is considered in terms of the emission standards for six classes of aircraft engines. Emphasis is placed on combustor design concepts to significantly reduce emissions levels and lean-burning techniques to lower flame temperature, to reduce the oxides of nitrogen in the gaseous emissions.

Description: Several experiments and a number of demonstrations were performed during Skylab to elucidate the behavior of fluids in space. The purposes of these experiments were to confirm hypotheses on how systems would behave in a low-g environment, determine to what extent residual accelerations and nongravity-driven convection affected processes, and provide graphic demonstrations of fluid behavior in space for classroom use and to stimulate new ideas for low-g research.

Description: Numerous applications take advantage of low gravity. These range from research, such as study of basic properties of materials or developing a better understanding of various processes and how they might be controlled, to actual production of unique materials, either in very limited quantities for research purposes to serve as paradigms for determining the limiting results of processes in which gravity effects are removed, or in large quantities, to fill certain high technology needs that cannot be met by other means. Examples of these are given in the following topics discussed: (1) crystal growth; (2) metals, alloys and composite materials (metallurgy); (3) glass and ceramics (containerless processing); (4) fluid and chemical processes; and (5) processing of biological materials.

Description: The following topics are discussed: (1) the inception of space processing; (2) earth-based experimental activities prior to Skylab (drop tower and research aircraft experiments); (3) preliminary experiments in space (Apollo and sounding rocket experiments); and (4) Skylab experimental facilities. Apparatus for contained materials processing; for brazing in space; and containerless processing are presented and discussed. The Skylab materials processing system and miscellaneous design considerations are also discussed.

Description: Service problems encountered on the F-4 aircraft showed that the environmental qualification requirements for the UHF blade antenna were not adequate. Although the individual environmental levels were stringent enough, only combined environmental testing could duplicate the conditions in which service problems occurred. Techniques for applying static side load simultaneously with vibration and temperature were developed. The combined environment testing was instrumental in the rapid assessment of antenna modifications and resulted in a final configuration which proved satisfactory in service. A need to include combined environmental testing for qualification of blade antennas was established.

Description: Turbine generator (T-G) units with low tuned concrete foundations were investigated experimentally during both startup and normal operating conditions. The dynamic response of the turbine generators and their foundation systems were characterized by resonance curves obtained during the startup transient and by vibration mode shapes at the normal operating condition. No severe resonance at the fundamental frequencies of the system was observed. The deflection or displacement of the foundation pedestal does not lead to unacceptable T-G vibration. The experimental results are compared and discussed with some previous theoretical studies.

Description: The major elements of the structural acoustics program for the B-1 aircraft are considered. Acoustic pressures measured at 280 sites on the surface of the vehicle were used to develop pressure models for a resizing of airframe components for aircraft No. 4 (A/C4). Acoustical fatigue design data for two dynamically complex structural configurations were acquired in laboratory programs, the conceptions for and executions of which detailed significant departures from the conventional. Design requirements for mechanical fasteners for configurations other than these two made use of analytical extensions of regrettably limited available information.

Description: The vibration environment within air conditioner rotating machinery referred to as an air cycle machine (ACM) was investigated to effectively increase ACM reliability. To assist in the selection of design changes which would result in improved ACM performance, various design modifications were incorporated into a baseline ACM configuration. For each design change, testing was conducted with the best balance achieveable (baseline) and with various degrees of unbalance. Relationships between unbalance (within the context of design changes) and the parameters associated with design goals were established. The results of rotor dynamics tests used to establish these relationships are presented.

Description: The hydrofoil fatigue loads environment in the open sea is examined. The random nature of wave orbital velocities, periods and heights plus boat heading, speed and control system design are considered in the assessment of structural fatigue requirements. Major nonlinear load events such as hull slamming and foil unwetting are included in the fatigue environment. Full scale rough water load tests, field experience plus analytical loads work on the model 929 Jetfoil commercial hydrofoil are discussed. The problem of developing an overall sea environment for design is defined. State of the art analytical approaches are examined.

Description: The transient response of an elastic cylindrical shell immersed in an acoustic media that is engulfed by a plane wave is determined numerically. The method applies to the USA-STAGS code which utilizes the finite element method for the structural analysis and the doubly asymptotic approximation for the fluid-structure interaction. The calculations are compared to an exact analysis for two separate loading cases: a plane step wave and an exponentially decaying plane wave.

Description: Reinforced concrete cells composed of concrete slabs and used to limit the effects of accidental explosions during hazardous explosives operations are analyzed. An automated design procedure which considers the dynamic nonlinear behavior of the reinforced concrete of arbitrary geometrical and structural configuration subjected to dynamic pressure loading is discussed. The optimum design of the slab is examined using an interior penalty function. The optimization procedure is presented and the results are discussed and compared with finite element analysis.

Description: The high closing speed of 57km/s between the spacecraft and Halley poses special problems in the design of the required meteoroid protection. A double wall structure with a total thickness equal to 0.1 to 1 times the diameter of the largest meteoroid encountered is sufficient to stop that meteoroid. However, the unusually high number of meteoroid impacts on the Halley probe will cause significant erosion of the outer wall so that failure of the second wall is more likely to occur from a small meteoroid passing through a previously created hole in the outer wall and then penetrating the second wall. Calculations of the shielding required based on this failure mode, show that a double wall structure must actually have a total thickness 1.2 to 7.3 times the diameter of the largest meteoroid encountered, depending on the size distribution of the meteoroids.

Description: The materials and processing constraints that are involved in the construction of a molecular wake shield for the shuttle orbiter are discussed. Stainless steel, having outgassing rates less than the required 10 to the minus 12th power Torr-liters/sq cm per second was the primary material suggested for the construction of the shield.

Description: Models depicting the ambient atmosphere which can overtake the spacecraft vacuum shield are presented. The subject areas discussed are: possible changing effects on the wake shield environment; possible utilization of the induced environmental contamination monitor; present state of the knowledge of the parameters used to describe the intermolecular collisions; the possibility of using simple models to describe the wake shield environment; possible errors associated with using kinetic theory to calculate that part of the atmosphere overtaking the shield; and a general assessment of the Monte Carlo techniques used to calculate the shield environment.

Description: Models depicting the collision dynamics in the near vicinity of a body orbiting in the upper atmosphere were studied to investigate degassing techniques for a vacuum facility.

Description: The results of radio frequency interference tests and the derived telemetry bit SNR degradation model, which includes the telemetry data rate and the telemetry data power as independent variables for characterizing the continuous wave interference effects on telemetry data, are presented. The telemetry bit SNR degradation model was implemented in the second version of the Deep Space Interference Prediction software.

Description: Research on waveguide arcs is presented as well as an evaluation on an arc detector. Ways of improving the radio frequency arc generation include methods of generating RF arcs inside the resonator. Dc nitrogen arcs were used to study a spectroradiometer. The spectral strucutres obtained provide a general sketch of spectral distribution and their relative magnitude. The upgrading of a transmitter test light and the simulation of an LED array are reported.

Description: A dielectric model of waveguide arcs is presented to relate measurable electromagnetic quantities to the physical parameters characterizing the breakdown process.

Description: The performance history of the 20-kW S-band transmitter, installed at three 64-meter antennas and six 26-meter antennas in the DSN, is reviewed. A number of failures and discrepancy reports are characteristic of the wearout phase of a failure curve. The type of failures are reviewed and four options toward reducing the number and cost of failures are reviewed. These are: existing (no change), refurbish, redesign and replacement. The options are compared on a ten year life cycle cost basis using FY77 expenditures for existing equipment as a base. It was concluded that benefits, in terms of reduction of outrage time, increase with an increase of expenditure toward improvement.

Description: The results and methods used to derive data for the recent changes to the DSN 34- and 64-m stations at both S- and X-band frequencies are presented.

Description: The design and implementation of a computerized data base created to support the DSN Energy Conservation Project with data relating to energy use at Goldstone Deep Space Communications Complex are described. The results of development work to date, are presented along with work currently in progress or in the planning stage.

Description: Decoding schemes are proposed for the tracking systems of the galileo project. Quick look decoding schemes requiring only shift registers are given for the DSN (7, 1/2) and (7, 1/3) convolutional codes. These schemes are used when the communication channel is error free. The schemes decode the data, symbol errors, and the lack of node syncronization.

Description: The maintenance data base collected for 15 weeks of recent unattended and automated operation of DSS 13 is summarized. During this period, DSS 13 was receiving spacecraft telemetry while being controlled remotely from JPL in Pasadena. Corrective and preventive maintenance manhours are reported by subsystem for DSS 13 including the equipment added for the automation demonstration. The corrective and preventive maintenance weekly manhours at DSS 13 averaged 22 and 40, respectively. The antenna hydraulic and electronic systems accounted for about half of the preventive and corrective maintenance manhours for a comparable attended DSN station, DSS 11.

Description: A model is formulated to describe the effect of the time interval chosen for preventive maintenance upon the frequency of failure and frequency of total maintenance. Trade-offs between these two frequencies are determined by computation of an optimal interval in the case where the failure distribution is known. For unknown distributions, an adaptive statistical technique is developed that converges to an optimal preventive maintenance interval. A numerical illustration is given.

Description: Some codes for arbitration of priorities among subsystem computers or peripheral device controllers connected to a parallel data bus are described. At arbitration time, several subsystems present wire-OR, parallel code words to the bus, and the central computer can identify the subsystem of highest priority and determine which of two or more transmission services the subsystem requires. A mathematical discussion of the optimality of the codes with regard to the number of subsystems that may participate in the scheme for a given number of wires is presented along with the number of services that each subsystem may request.

Description: The development of a monitor system for the DSS 13 antenna is presented. The system checks for accumulator pressures, differential pressures, wind velocity, power supplies, fluid temperatures, and fluid levels. It was concluded that the system performed properly in high winds and correctly reported all malfunctions.

Description: Research on the behavior of the carrier tracking loop exposed to a continuous wave irradiation along with Bruno's closed form of approximation for the loop phase error are described.

Description: An analysis of the size of a class of binary codes capable of correcting a single asymmetric error is presented.

Description: The system design, hardware construction, and predicted performance of a Costas loop is presented. Its expected performance regarding steady state phase error under assumed Doppler conditions, rms phase jitter, and their respective sensitivities with respect to variations in signal to noise ratios are discussed.

Description: The reconstructed carrier of a telemetry return signal is used in deriving the Doppler and range information in the radiometric systems. When suppressed carrier BPSK signalling with Costas loop demodulation is used, there are concerns on the amount of shift in the reconstructed carrier phase, when the received signal suffers asymmetric bandpass filtering through the various stages of the receiver. It is concluded that the phase shifts due to asymmetric bandpass filtering on the Costas loop's reconstructed carrier can be slightly worse than those suffered by the residual carrier loop's reconstructed carrier. However, they are well within the error budgets of the radiometric system.

Description: Suppressed carrier binary phase-shift keyed (BPSK) signalling is currently being considered as a design alternative for future DSN telemetry in the multimegabit range. Carrier tracking of such signals is usually achieved by a Costas loop, as opposed to the ordinary phase lock loop. A Costas loop capable of demodulating BPSK signals with data rates up to 1 Msps was designed and constructed and its Doppler tracking performance with respect to a Block 3 receiver was tested at the Telecommunications Development Laboratory (TDL). The compatibility of suppressed carrier signalling with the current radiometric system, specifically Doppler tracking and ranging, was investigated. The experimental results obtained to-date with respect to Doppler tracking are presented.

Description: The closed-loop conical-scan (conscan) technique has proven to be a useful method for pointing the DSN antennas more accurately than is possible by open-loop methods. As presently implemented, the antenna beam is scanned about the received signal direction by physical movement of the antenna. While straightforward, this approach has at least two disadvantages. Firstly, because of structural distortions, finite angle encoder resolution, and drive servo response, the actual antenna beam direction only approximates the commanded beam direction. Secondly, because of the large mass moved during scan, the rate of scan is severely restricted. If there are significant gain or signal level variations during a scan period, the conscan system interprets these variations as antenna pointing error. Both of these disadvantages would be alleviated in an inertialess conscan system in which the beam scanning was performed electronically. Recently, standard JPL antenna feedhorn software was upgraded to calculate, among other things, asymmetric corrugated horn radiation patterns of the type that would be needed for electronic beam scan. The required horn excitation is discussed and the results were described.

Description: The HYBRIDHORN computer program was developed to serve as an item of general purpose antenna feedhorn design and analysis software. The formulation contains a small flare angle approximation which is subject to question for designs such as the S- and X-band feedhorn. Additionally, the original formulation did not allow azimuthal variation indexes other than unity. The HYBRIDHORN program was upgraded to correct both of these deficiencies. A large flare angle formulation was found. In the upgrade, all of the major program elements were converted to Univac 1108 compatible structured FORTRAN (SFTRAN) for ease of software maintenance. The small and large angle formulations are described and sample numerical results are presented.

Description: To meet the phase stability requirements of certain experiments performed with the Deep Space Network, transmission lines carrying reference signals must be stabilized to reduce changes in their electrical length due to mechanical movement or changes in ambient temperature. A transmission line phase stabilizer being developed at JPL to perform this function is described.

Description: If the VCO of a phase-locked receiver is to be replaced by a digitally programmed synthesizer, the phase error signal must be sampled and quantized. Effects of quantizing after the loop filter (frequency quantization) or before (phase error quantization) are investigated. Constant Doppler or Doppler rate noiseless inputs are assumed. The main result gives the phase jitter due to frequency quantization for a Doppler-rate input. By itself, however, frequency quantization is impractical because it makes the loop dynamic range too small.

Description: The Mu2 ranging system has been installed at DSS 42/43 in Australia. It was used to support the 1979 Viking relativity experiment and is currently supporting Voyager navigation and the advanced systems program. These tasks as well as Mu2 software and hardware modifications prior to installation are described.

Description: A nonuniform sampling strategy, phase quadrature sampling, in which a process of bandwith B is sampled at rate B in each of two channels where the two channels are pi/2 out of phase at frequency B is described. Phase quadrature sampling is a special case of sampling, where the phase between channels is fixed but arbitrary. A simple method for recovering the spectrum of the input process from syncopated samples is derived. The derivation indicates what values of phase between channels result in lossless sampling.

Description: Stability of the multimegabit telemetry digital Costas loop is considered. It is shown that the present design is stable with about 35.2 dB gain margin, and therefore is quite stable. The bandpass filter implementation of the data filters is covered.

Description: A candidate pre-Analog to Digital filter bandwidth versus data rate design is presented for the multimegabit telemetry demodulator/detector. The design is based on considerations of Analog to Digital bias, quantization errors, and automatic gain control effects, as well as the deleterious effects of filtering. Two methods of gain control of the input level to the analog to Digital converter are considered. The first method uses a particular value of gain, according to which bandwidth is selected. The second method uses a second narrowband noncoherent Automatic Gain Controls (in the LPF bandwidth) to attempt to keep the Analog to Digital input level constant. This second method reduces the bit error rate degradation slightly but appears to be more difficult to implement.

Description: The Deep Space Network support of the Pioneer Venus Mission is reported. The orbiter's Venus orbit insertion, multiprobe entry, and orbiter occultation experiment support are included.

Description: The Deep Space Network (DSN) support Viking spacecraft activities during the period 1 September 1978 through 31 March 1979 is reported. The DSN Viking command and tracking support is included.

Description: The objectives, functions, and organization of the Deep Space Network are summarized; deep space station, ground communication, and network operations control capabilities are described.

Description: A continuation of the Deep Space Network report on tracking and data acquisition for Project Voyager is presented. The Jupiter encounter period for Voyager 1, from 1 January through March 1979 is covered.

Description: The effects of anomalous D region ionization upon radio wave propagation are described for the main types of disturbances: sudden ionospheric disturbances, relativistic electron events, magnetic storms, auroral disturbances, polar cap events, and stratospheric warmings. Examples of radio wave characteristics for such conditions are given for the frequencies between the extremely low (3-3000 Hz) and high (3-30 MHz) frequency domains. Statistics on the disturbance effects and radio wave data are given in order to contribute towards the evaluation of possibilities for predicting the radio effects.

Description: Ionization processes for the D region are reviewed. Levels of ionization range from the fairly steady rates produced through galactic cosmic rays to the large rates generated during solar flares and associated geomagnetic storms. The normal quiescent daytime D region is ionized by solar UV radiation available because of certain windows and solar X-rays, although this later source is generally weak. Cosmic rays are important roughly below 65 km. At night, stellar X-ray sources may be important along with precipitating electrons at high latitudes from the quiet magnetosphere. Solar flares can result in ionization rates due to X-rays, electrons, or nuclei which are greatly enhanced over quiet conditions. Typical ionization production rates from these various sources are illustrated.

Description: Present knowledge of D region phenomena is briefly reviewed and the status of current methods of predicting their effects on radio propagation considered. The ELF, VLF and LF navigational and timing systems depend on the stability of the lower part of the D layer where these waves are reflected, whereas MF and HF waves are absorbed as they penetrate the region, in most cases mainly in the upper part of the layer. Possible methods of improving predictions, warnings, and real time operations are considered with particular stress on those which can be implemented in the near future.

Description: Results obtained at high latitude observatories on the behavior of E and F region ionization are presented including a bibliography. Behavior of E and F region ionization during day and night for quiet and disturbed conditions in the auroral and polar regions is described. Daily, seasonal and sunspot variations are also outlined.

Description: The formation and variation of the ionosphere is addressed with regard to the ability to understand, specify, and predict the low and mid latitude E and F regions. A brief survey of prediction methods and techniques is given for long and short term variability in the E and F regions. It is indicated that the usefulness of theoretical models to predict electron density distribution in the low and mid latitude ionospheric E and F regions is limited by the ability to predict the parameters which enter the relevant equations; i.e., neutral atmospheric constituents, neutral and charged particle temperatures, neutral wind, electric fields, and ionizing sources such as solar (E sub uv) radiation and energetic particles. It is recommended that areas for research include improving knowledge of the input parameters and how they respond to changing solar and geophysical conditions.

Description: The major properties of polar ionospheric main anomalous events are summarized. The monitoring of large scale features of the ionization distribution that are the projections of large scale structural characteristics of magnetospheric plasma on the upper ionosphere is suggested as a basic principle of polar ionospheric condition forecasting. It is concluded that the processes of the magnetosphere/ionosphere interaction appear to play a predominant role in the creation of the polar ionosphere.

Description: The physical processes and morphology of the high latitude E and F layers are discussed. The existence and adequacy of models, and features to be included are examined, as well as reliability of ionospheric predictions.

Description: Effects of solar variations on energetic particle propagation are discussed, as well as prediction techniques for such particles within the magnetosphere. Magnetic field models, magnetic energy stored in the tail, magnetic monitoring measurements in the geostationary orbit and at certain ground based stations are important elements concerning improving such techniques.

Description: The determination of the Mars-centered ephemerides of the Viking Orbiters and positions of the Landers from two way Doppler and range data is described. An overview of mission satellite orbit determination functions and methods is given. Topics covered include: postmaneuver orbit convergence, local orbit knowledge accuracies, the effects of interplanetary media, use of constrained solutions, and solving through trim burns. Procedure and results relevant to the determination of the planet gravity field are included. Results relative to sensing Mars' gravity field during the extended mission are presented along with a discussion of the Phobos Flyby Experiment conducted during February 1977.

Description: The launch, interplanetary, encounter, and Mars orbit phases of the Viking 1 and 2 spacecraft trajectories are described. Time history plots of several parameters relative to the trajectories are presented along with tables of the geocentric, heliocentric, aerocentric, and injection orbital elements appropriate to each of the spacecraft trajectories.

Description: A general description of the Viking interplanetary orbit determination activity extending from launch to Mars encounter is given. The emphasis is on the technical fundamentals of the problem, basic strategies and data types used, quantitative results, and specific conclusions derived from the inflight experience. Special attention is given to the use of the spacecraft-based optical measurements and their first application as a principal navigational data type for an interplanetary mission. The optical-based orbit determination, in fact, was the primary contributor to the exceptional interplanetary navigation accuracy experienced by both Viking missions. The Viking application of optical orbit determination relied in large part on the technology developed and demonstrated by the Mariner 9 Optical Navigation Demonstration.

Description: The four Dimensional Ionospheric Model (4-D) is described. The 4-D integrates a wide variety of ionospheric data types into a consistent ionospheric specification. At each observing location, the 4-D reduces an entire electron density profile to four weighting coefficients. These weighting coefficients are interconnected in time and space by spectral analysis techniques. The resultant field of spectral coefficients can be used to reconstruct an electron density profile at any latitude, longitude and time.

Description: The procedure to predict solar activity indexes for use in upper atmosphere density models is given together with an example of the performance. The prediction procedure employs a least square linear regression model to generate the predicted smoothed vinculum R sub 13 and geomagnetic vinculum A sub p(13) values. Linear regression equations are then employed to compute corresponding vinculum F sub 10.7(13) solar flux values from the predicted vinculum R sub 13 values. The output is issued principally for satellite orbital lifetime estimations.

Description: Methods for forecasting the state of the space environment, Sun, interplanetary field, magnetosphere, and ionosphere are discussed. Areas requiring scientific advancements to support the increasing operational requirements of systems that use or are affected by the environment above 50 km are identified.

Description: The monthly and weekly T indices are discussed. Some possibilities for improving the reliability of the weekly T index are considered, including extending its applicability to daily variations of the global ionosphere.

Description: East-West solar scans produced daily on 692 and 1415 MHz are analyzed for the period 1968 to 1973. The analysis confirms that coronal holes are stable features displaying significantly reduced electromagnetic emission which can persist for many solar rotations. The coronal hole observations are summarized in a series of tables.

Description: The operation of the Sydney Regional Warning Centre is reviewed. Routine data reports are issued daily, while disturbance warnings (short-term forecasts) are issued as necessary. An outline of the methods used in forecasting solar activity and geomagnetic disturbances is given.

Description: The solar-geophysical events of 1977 September 7-26 are presented. A variety of disturbance forecasting problems, viz, disc transit of a center of activity with high microwave flux but relatively low meter-wave flux, flares in this region near east limb, central meridian, and west limb with major radio events, and the presence of two coronal holes, were observed. The Sydney daily GEOSYD message and IPS Disturbance Warnings issued during this period are related to the solar geophysical data available, at the time, about these events.