ALBERT

Description: The Compass Final Report: Europa Tunnelbot, is a summary of three Compass concurrent engineering team designs for penetrating the ice of Europa and reaching the ocean, while sampling for biomarkers and communicating back to the surface. These conceptual designs, while providing complete conceptual layouts for these penetrators, or 'Tunnelbots' along with the associated communication 'Repeaters' primarily focused on the power and thermal systems needed for these devices. Trades for these systems will provide advantages and challenges for each option. These results will be used to guide power technology development.

Description: The solar tide in an ancient Venusian ocean is simulated using a dedicated numerical tidal model. Simulations with varying ocean depth and rotational periods ranging from minus 243 to 64 sidereal Earth days are used to calculate the tidal dissipation rates and associated tidal torque. The results show that the tidal dissipation could have varied by more than 5 orders of magnitude, from 0.001 to 780 gigawatts (GW), depending on rotational period and ocean depth. The associated tidal torque is about 2 orders of magnitude below the present day Venusian atmospheric torque, and could change the Venusian daylength by up to 72 days per million years depending on rotation rate. Consequently, an ocean tide on ancient Venus could have had significant effects on the rotational history of the planet. These calculations have implications for the rotational periods of similarly close-in exoplanetary worlds and the location of the inner edge of the liquid water habitable zone.

Description: The habitable zone (HZ) is commonly defined as the range of distances from a host star within which liquid water, a key requirement for life, may exist on a planet's surface. Substantially more CO2 than present in Earth's modern atmosphere is required to maintain clement temperatures for most of the HZ, with several bars required at the outer edge. However, most complex aerobic life on Earth is limited by CO2 concentrations of just fractions of a bar. At the same time, most exoplanets in the traditional HZ reside in proximity to M dwarfs, which are more numerous than Sun-like G dwarfs but are predicted to promote greater abundances of gases that can be toxic in the atmospheres of orbiting planets, such as carbon monoxide (CO). Here we show that the HZ for complex aerobic life is likely limited relative to that for microbial life. We use a 1D radiative-convective climate and photochemical models to circumscribe a Habitable Zone for Complex Life (HZCL) based on known toxicity limits for a range of organisms as a proof of concept. We find that for CO2 tolerances of 0.01, 0.1, and 1 bar, the HZCL is only 21%, 32%, and 50% as wide as the conventional HZ for a Sun-like star, and that CO concentrations may limit some complex life throughout the entire HZ of the coolest M dwarfs. These results cast new light on the likely distribution of complex life in the universe and have important ramifications for the search for exoplanet biosignatures and technosignatures.

Description: Four, quasi-circular, positive Bouguer gravity anomalies (PBGAs) that are similar in diameter (~90-190 km) and gravitational amplitude (〉 140 mGal contrast) are identified within the central Oceanus Procellarum region of the Moon. These spatially associated PBGAs are located south of Aristarchus Plateau, north of Flamsteed crater, and two are within the Marius Hills volcanic complex (north and south). Each is characterized by distinct surface geologic features suggestive of ancient impact craters and/or volcanic/plutonic activity. Here, we combine geologic analyses with forward modeling of high-resolution gravity data from the Gravity Recovery and Interior Laboratory (GRAIL) mission in order to constrain the subsurface structures that contribute to these four PBGAs. The GRAIL data presented here, at spherical harmonic degrees 6660, permit higher resolution analyses of these anomalies than previously reported, and reveal new information about subsurface structures. Specifically, we find that the amplitudes of the four PBGAs cannot be explained solely by mare-flooded craters, as suggested in previous work; an additional density contrast is required to explain the high-amplitude of the PBGAs. For Northern Flamsteed (190 km diameter), the additional density contrast may be provided by impact-related mantle uplift. If the local crust has a density ~2800 kg/cu.m, then ~7 km of uplift is required for this anomaly, although less uplift is required if the local crust has a lower mean density of ~2500 kg/cu.m. For the Northern and Southern Marius Hills anomalies, the additional density contrast is consistent with the presence of a crustal complex of vertical dikes that occupies up to ~50% of the regionally thin crust. The structure of Southern Aristarchus Plateau (90 km diameter), an anomaly with crater-related topographic structures, remains ambiguous. Based on the relatively small size of the anomaly, we do not favor mantle uplift; however, understanding mantle response in a region of especially thin crust needs to be better resolved. It is more likely that this anomaly is due to subsurface magmatic material given the abundance of volcanic material in the surrounding region. Overall, the four PBGAs analyzed here are important in understanding the impact and volcanic/plutonic history of the Moon, specifically in a region of thin crust and elevated temperatures characteristic of the Procellarum KREEP Terrane.

Description: While devoid of an active magnetic dynamo field today, Mars possesses a remanent magnetic field that may reach several thousand nanoteslas locally. The exact origin and the events that have shaped the crustal magnetization remain largely enigmatic. Three magnetic field data sets from two spacecraft collected over 13 cumulative years have sampled the Martian magnetic field over a range of altitudes from 90 up to 6,000 km: (a) Mars Global Surveyor (MGS) magnetometer (19972006), (b) MGS Electron Reflectometer (19992006), and (c) Mars Atmosphere and Volatile EvolutioN (MAVEN) magnetometer (2014 to today). In this paper we combine these complementary data sets for the first time to build a new model of the Martian internal magnetic field. This new model improves upon previous ones in several aspects: comprehensive data coverage, refined data selection scheme, modified modeling scheme, discrete-to-continuous transformation of the model, and increased model resolution. The new model has a spatial resolution of 160 km at the surface, corresponding to spherical harmonic degree 134. It shows small scales and well-defined features, which can now be associated with geological signatures.

Description: Amorphous solid water (ASW) is found on icy dust grains in the interstellar medium (ISM), as well as on comets and other icy objects in the outer solar system. The optical properties of ASW are thus relevant for many astrophysical environments, but in the ultravioletvisible (UVvis), its refractive index is not well constrained. Here, we introduce a new method based on UVvis broadband interferometry to measure the wavelength dependent refractive index n() of amorphous water ice from 10 to 130 K, i.e., for different porosities, in the wavelength range of 210757 nm. We also present n() for crystalline water ice at 150 K, which allows us to compare our new method with literature data. Based on this, a method to calculate n(, ) as a function of wavelength and porosity is reported. This new approach carries much potential and is generally applicable to pure and mixed ice, both amorphous and crystalline. The astronomical and physicalchemical relevance and future potential of this work are discussed.

Description: The Compact Reconnaissance Imaging Spectral Mapper (CRISM) onboard the Mars Reconnaissance Orbiter (MRO) obtains pole-to-pole observations (i.e., full MRO orbits) of vertical profiles for visible/near-IR spectra (=0.44.0 m), which are ideally suited to identifying the composition and particle sizes of Mars ice and dust aerosols over 50100 km altitudes in the Mars mesosphere. Within the coverage limitations of the CRISM limb data set, a distinct compositional dichotomy is found in Mars mesospheric ice aerosols. CO2 ice clouds appear during the aphelion period of Mars orbit (Solar Longitudes, Ls0160) at low latitudes (20S10N) over specific longitude regions (Meridiani, Valles Marineris) and at typical altitudes of 5575 km. Apart from faint water ice hazes below 55 km, mesospheric H2O ice clouds are primarily restricted to the perihelion orbital range (Ls160 350) at northern and southern mid-to-low latitudes with less apparent longitudinal dependences. Mars mesospheric CO2 clouds are presented in CRISM spectra with a surprisingly large range of particle sizes (cross section weighted radii, Reff=0.3 to 2.2 m). The smaller particle sizes (Reff 1 m) appear concentrated near the spatial (latitude and altitude) boundaries of their global occurrences. CRISM spectra of mesospheric CO2 clouds also show evidence of iridescence, indicating very narrow particle size distributions (effective variance, Veff0.03) and so very abrupt CO2 cloud nucleation. Furthermore, these clouds are sometimes accompanied by altitude coincident peaks in 1.27 m O2 dayglow, which indicates very dry, cold regions of formation. Mesospheric water ice clouds generally exhibit small particle sizes (Reff=0.10.3 m), although larger particle sizes (Reff=0.40.7 m) appear infrequently. On average, water ice cloud particle sizes decrease with altitude over 5080 km in the perihelion mesosphere. Water ice mass appears similar in clouds over a large range of observed cloud particle sizes, with particle number densities increasing to 10 cm3 for Reff=0.2 m. Near coincident Mars Climate Sounder (MCS) temperature and aerosol profile measurements for a subset of CRISM mesospheric aerosol measurements indicate near saturation (H2O and CO2) conditions for ice clouds and distinct mesospheric temperature increases associated with mesospheric dust loading. Dayside (3 pm) mesospheric CO2 clouds with larger particle sizes (Reff 0.5 m) scatter surface infrared emission in MCS limb infrared radiances, as well as solar irradiance in the MCS solar band channel. Scattering of surface infrared emission is most strikingly presented in nighttime (3 am) MCS observations at 5560 km altitudes, indicating extensive mesospheric nighttime CO2 clouds with considerably larger particle sizes (Reff7 m). Mesospheric CO2 ice clouds present cirrus-like waveforms over extensive latitude and longitude regions (1010), as revealed in coincident Mars Color Imager (MARCI) nadir imaging. Solar tides, gravity waves, and the large orbital variation of the extended thermal structure of the Mars atmosphere influence all of these behaviors. Mesospheric dust aerosols appear infrequently over the non-global (planet encircling) dust storm era of the CRISM limb data set (20092016), and exhibit smaller particle sizes (Reff=0.20.7 m) relative to dust in the lower atmosphere. One isolated case of an aphelion (Ls=96) mesospheric dust layer with large dust particle sizes (Reff 2 m) over Syria Planum may reflect high altitude, non-local transport of dust over elevated regions.

Description: Photometry from the Helios and STEREO spacecraft revealed regions of enhanced sky surface-brightness suggesting a narrow circumsolar ring of dust associated with Venus's orbit. We model this phenomenon by integrating the orbits of 10,000,000+ dust particles subject to gravitational and non-gravitational forces, considering several different kinds of plausible dust sources. We find that only particles from a hypothetical population of Venus co-orbital asteroids can produce enough signal in a narrow ring to match the observations. Previous works had suggested such objects would be dynamically unstable. However, we re-examined the stability of asteroids in 1:1 resonance with Venus and found that ~8% should survive for the age of the solar system, enough to supply the observed ring.

Description: Infrared excesses due to dusty disks have been observed orbiting white dwarfs with effective temperatures between 7200 and 25,000 K, suggesting that the rate of tidal disruption of minor bodies massive enough to create a coherent disk declines sharply beyond 1 Gyr after white dwarf formation. We report the discovery that the candidate white dwarf LSPM J0207+3331, via the Backyard Worlds: Planet 9 citizen science project and Keck Observatory follow-up spectroscopy, is hydrogen dominated with a luminous compact disk (L IR/L star = 14%) and an effective temperature nearly 1000 K cooler than any known white dwarf with an infrared excess. The discovery of this object places the latest time for large-scale tidal disruption events to occur at ~3 Gyr past the formation of the host white dwarf, making new demands of dynamical models for planetesimal perturbation and disruption around post-main-sequence planetary systems. Curiously, the mid-infrared photometry of the disk cannot be fully explained by a geometrically thin, optically thick dust disk as seen for other dusty white dwarfs, but requires a second ring of dust near the white dwarf's Roche radius. In the process of confirming this discovery, we found that careful measurements of WISE source positions can reveal when infrared excesses for white dwarfs are co-moving with their hosts, helping distinguish them from confusion noise.

Description: Found on all terrestrial planets, wrinkle ridges are anticlines formed by thrust faulting and folding resulting from crustal shortening. The MErcury Surface, Space Environment, Geochemistry, and Ranging (MESSENGER) spacecraft's orbital phase returned high resolution images and topographic data of the previously unimaged northern high latitudes of Mercury where there are large expanses of smooth plains deformed by wrinkle ridges. Concurrently, the Lunar Reconnaissance Orbiter (LRO) is obtaining high resolution images and topographic data covering lunar mare wrinkle ridges. These data allow quantitative comparison of the scale of wrinkle ridges in smooth plains volcanic units on Mercury with mare wrinkle ridges. We evaluate the topographic relief of 300 wrinkle ridges within and outside of mascon basins on the Moon and Mercury. Measured wrinkle ridges range from ~112 to 776 m in relief with a mean of ~350 m (median = ~340 m, n = 150) on Mercury and from ~47 to 678 m in relief with a mean of ~198 m (median = ~168 m, n = 150) on the Moon. Wrinkle ridges on Mercury thus are approximately twice as large in mean relief compared to their counterparts on the Moon. The larger scale of Mercury's wrinkle ridges suggests that their formation can be attributed, in part, to global contraction. As global contraction on the Moon is estimated to be an order of magnitude smaller than on Mercury, the smaller scale of lunar wrinkle ridges suggests they most likely form primarily by load induced subsidence of the mare basalt. Wrinkle ridges located in lunar mascon basins and in the Caloris mascon on Mercury are not statistically significantly different in relief than ridges in non-mascon regions, suggesting comparable levels of contractional strain. The fact that mascon basins do not host wrinkle ridges with greater structural relief relative to non-mascon units may indicate the critical role lithospheric thickness plays in controlling subsidence and contraction of thick volcanic sequences on the Moon and Mercury.

Description: This document describes the trajectory and atmosphere reconstruction of the Mars Phoenix Entry, Descent, and Landing using the New Statistical Trajectory Estimation Program. The approach utilizes a Kalman filter to blend inertial measurement unit data with initial conditions and radar altimetry to obtain the inertial trajectory of the entry vehicle. The nominal aerodynamic database is then used in combination with the sensed accelerations to obtain estimates of the atmosphere-relative state. The reconstructed atmosphere pro le is then blended with pre-flight models to construct an estimate of the as-flown atmosphere.

Description: In 2012 during the entry, descent, and landing of the Mars Science Laboratory (MSL), the MSL Entry, Descent, and Landing Instrumentation (MEDLI) sensor suite was collecting in-flight heatshield pressure and temperature data. The data collected by the MEDLI instruments has since been used for reconstruction of vehicle aerodynamics, atmospheric conditions, aerothermal heating, and Thermal Protection System (TPS) performance as well as material response model validation and refinement. The Mars Entry, Descent, and Landing Instrumentation 2 (MEDLI2) sensor suite for the Mars 2020 heatshield and backshell is being designed to expand on the measurements and knowledge gained from MEDLI. Similar to MEDLI, MEDLI2 will measure the pressure and temperature of the heatshield. MEDLI2 will additionally measure the temperature, pressure, total heat flux, and radiative heat flux on the backshell.Since the backshell instrumentation is new to MEDLI2, Do No Harm (DNH) testing was conducted on instrumented backshell TPS (SLA-561V) panels. The panels consisted of four pressure port holes, one Mars Entry Atmospheric Data System (MEADS) pressure port plug, one MEDLI2 Integrated Sensor Plug (MISP) thermal plug, and one heat flux sensor. DNH testing was conducted to ensure the performance of the TPS was not degraded due to sensor integration and to characterize any TPS performance changes. The testing consisted of environmental testing vibration, shock, thermal vacuum (TVAC) cycling and bounding aerothermal (arc jet) testing. During arc jet testing, the heat flux sensors embedded in the SLA-561V panels exhibited an unexpected temporary reduction in the heat flux sensor temperature and response. After review of the test results, it was determined that this unexpected response was confined to the two heat flux sensors that experienced the greatest thermal shock condition. This condition consisted of a liquid nitrogen (LN2) bath that induced temperatures of approximately -190C, and then a transition (thermal shock) to an arc jet test at a heat rate of approximately 21 W/cm2. Both heat flux sensors that were exposed to this thermal shock experienced a blister in the thermal coating during the arc jet test.Two heat flux sensor thermal shock test series were performed to investigate the cause of the blistering and subsequent energy release. In these tests, the heat flux sensor was first cold soaked in either a dry ice or LN2 bath to induce temperatures of approximately -78C or -190C, respectively. Then the sensors were thermally shocked using two propane torches with a heat rate of either approximately 8 W/cm2 or 21 W/cm2. The key findings indicated that there is a correlation between thermal shock and the blistering observed in the DNH test series, and that the cause appeared to be rooted in the heat flux sensor epoxy that encapsulates the sensor thermopile.Since the heat flux sensors are required to measure heat fluxes up to 15 W/cm2 during the Mars 2020 entry, a third test series was designed to determine if blistering is an issue at this maximum expected flight heat flux. Results from all three thermal shock test series and a discussion about whether or not blistering of the heat flux sensor thermal coating could be an issue for the Mars 2020 mission will be presented.

Description: We scoured the full set of blue-wavelength Hubble Space Telescope images of Neptune, finding one additional dark spot in new Hubble data beyond those discovered in 1989, 1994, 1996, and 2015. We report the complete disappearance of the SDS-2015 dark spot, using new Hubble data taken on 2018 September 910, as part of the Outer Planet Atmospheres Legacy (OPAL) program. Overall, dark spots in the full Hubble data set have lifetimes of at least one to two years, and no more than six years. We modeled a set of dark spots randomly distributed in time over the latitude range on Neptune that is visible from Earth, finding that the cadence of archival Hubble images would have detected about 70% of these spots if their lifetimes are only one year, or about 85%95% of simulated spots with lifetimes of two or more years. Based on the Hubble data set, we conclude that dark spots have average occurrence rates of one dark spot every four to six years. Many numerical models to date have simulated much shorter vortex lifetimes, so our findings provide constraints that may lead to improved understanding of Neptunes wind field, stratification, and humidity.

Description: This document is derived from the former National Aeronautics and Space Administration (NASA) Constellation Program (CxP) document CxP 70023, titled The Design Specification for Natural Environments (DSNE), Revision C. The original document has been modified to represent updated Design Reference Missions (DRMs) for the NASA Exploration Systems Development (ESD) Programs.

Description: The Submillimeter Enceladus Life Fundamentals Instrument (SELFI) is a passive remote sensing submillimeter heterodyne spectrometer being developed at NASA GSFC under NASA's Maturation of Instruments for Solar System Exploration (MatISSE) program. SELFI will advance submillimeter receiver technology by 1) investigating the chemical and isotopic compositions and corresponding densities of Enceladus' plume material, their vertical thermal structures, and the transport mechanisms within the plumes, and 2) characterizing the source regions from which the plumes emerge. The Enceladus plumes are important in the context of life and habitability of its subsurface ocean environment. SELFI remote sensing measurements will 1) measure the spatial and temporal variabilities in the plume chemical compositions, 2) provide insight in to Enceladus' subsurface ocean environment by monitoring H2O, HDO, d18O, and d17O, 3) constrain the oxidation state of the subsurface ocean using H2O2 and O3, and 4) utilize the SO2 and H2S spectral signatures to constrain the impact arising from both the sea-floor volcanoes and pre-biotic molecules. Moreover, the detection of the remaining molecular species (14 in total) is vital to improving the current state of knowledge of Enceladus' subsurface ocean habitability this also permits us to explore the chemical alteration processes arising from primordial volatiles that have been observed in comets. Lastly, SELFI's continuum observations enable the correlation between observed variations in plume activity with surface temperatures.SELFI is currently being developed under a technology maturation program that will advance the RF-to-digital electronics of a submillimeter-wave heterodyne spectrometer to simultaneously observe fourteen molecular species with resonances between 530 GHz and 600 GHz. SELFI will have fine radiometric resolution, high spectral resolution (resolving power R 〉 106), multiple continuum channels and a high dynamical range, necessary to map Enceladus across its 30 K to 250 K temperature range. Under the MatISSE program, SELFI will advance from TRL 4 to 6 four key technologies of the RF-to-digital subsystem, which are: 1) the RF low noise amplifier design; 2) the single-sideband (SSB) mixer and local oscillator; 3) the IF assembly down-converter that maps the fourteen species to 2 x 500 MHz bandwidth; and 4) the digital spectrometer electronics.

Description: Seeker is an automated extravehicular free-flying inspector CubeSat designed and built in-house at the Johnson Space Center (JSC). As a Class 1E project funded by the International Space Station (ISS) Program, Seeker had a streamlined process to flight certification, but the vehicle had to be designed, developed, tested, and delivered within approximately one year after authority to pro-ceed (ATP) and within a $1.8 million budget. These constraints necessitated an expedited Guidance, Navigation, and Control (GNC) development schedule, development began with a navigation sensor trade study using Linear Covariance (LinCov) analysis and a rapid sensor downselection process, resulting in the use of commercial off-the-shelf (COTS) sensors which could be procured quickly and subjected to in-house environmental testing to qualify them for flight. A neural network was used to enable a COTS camera to provide bearing measurements for visual navigation. The GNC flight software (FSW) algorithms utilized lean development practices and leveraged the Core Flight Software (CFS) architecture to rapidly develop the GNC system, tune the system parameters, and verify performance in simulation. This pace was anchored by several Hardware-Software Integration (HSI) milestones, which forced the Seeker GNC team to develop the interfaces both between hardware and software and between the GNC domains early in the project and to enable a timely delivery.

Description: Mars is a dusty planet. Wind often lifts dust from the surface into the air forming clouds of dust at different locations across Mars. These dust storms typically last up to a couple days and grow to a few hundred km in size. However, once in a long while when conditions are just right, localized dust storms can interact in a way that optically thick suspended dust covers nearly the entire planet remaining aloft for weeks to months. These global-scale dust storms are the most dramatic of all weather phenomena on Mars, greatly altering the thermal structure and dynamics of the Martian atmosphere and significantly changing the global distribution of surface dust. Such a global-scale dust storm occurred during the summer of 2018, the first such event since 2007. The global dust storm was observed by an international fleet of spacecraft in Mars orbit and on the surface of Mars providing an unprecedented view of the initiation, growth, and decay of the storm as well as the physical properties of the dust during the storm's evolution. The 2018 global-scale dust storm was observed to grow from several localized dust-lifting centers with wind-blown dust suspended in the atmosphere encircling Mars after about two weeks of activity. Dust column optical depths recorded by the Opportunity and Curiosity rovers on the surface were the highest ever recorded on Mars. Peak global intensity of the dust storm was reached in early July 2018. Over the next couple months, the dust settled out and the atmosphere returned to its climatological average. Only a small number of global-scale dust storms have been observed on Mars, and so detailed analysis of the observations of this storm will provide important new insight into how these events occur and their effect on the current Mars climate.

Description: The crystallographic orientations of chondrule minerals can provide important insights into their formation and deformational history. For example, the orientations of the olivine bars and surrounding rim in barred olivine chondrules provide information and on the conditions of crystallization and the orientations and shapes of olivines within porphritic chondrules can record the reactions with the surrounding nebular gas during chondrule formation. Later deformation on the parent body can cause crystal-plastic deformation of chondrule minerals that is evident through their intracrystalline lattice misorientations. Typically these crystal orientations and lattice misorientations are determined using electron backscatter diffraction (EBSD) on thin sections but this gives only a 2D picture for what is actually a 3D texture. While it is possible to combine EBSD with serial sectioning to build a 3D dataset of texture, this is a destructive, time-intensive process. A recent technological development that enables non-destructive, 3D crystallographic orientation measurement is X-ray diffraction contrast tomography (DCT), which uses the X-ray diffraction of the crystal lattice to determine orientation. Originally only possible using monochromatic X-ray beams at 3rd generation synchrotron light sources, DCT has been recently adapted to polychromatic sources of laboratory X-ray microscopes (referred to as Lab-DCT). Up to this point LabDCT has only been applied to large, well-formed crystals of high symmetry (i.e., metals), but we recently acquired DCT datasets for a pair Bjurble chondrules to determine the applicability of the technique to natural, mutlimineralic samples composed predominately of olivine (i.e., chondrules).

Description: A number of new instrument capabilities are currently in maturation for future in situ use on planetary science missions. Moving beyond the impressive in situ instrumentation already operating in planetary environments beyond Earth will enable the next step in scientific discovery. The approach for developing beyond current instrumentation requires a careful assessment of science-driven capability advancement. To this end, two examples of instrument technology development efforts that are leading to new and important analytical capabilities for in situ planetary science will be discussed: (1) an instrument prototype enabling the interface between liquid separation techniques and laser desorption/ionization mass spectrometry and (2) an addressable excitation source enabling miniaturized electron probe microanalysis for elemental mapping of light and heavy elements.

Description: The occurrence of extensive valley networks and layered deposits of phyllosilicates and sulfates during the late Noachian/Hesperian periods (approx. 3-4 Gyrs) indicates a past martian climate that was capable of maintaining liquid water at the surface. The planets climate drastically changed after these early episodes of water to a drier and colder environment during the Amazonian period (past 3.0 Gyrs). The objective of this paper is to describe aqueous alteration/weathering scenarios on Mars based on observations returned by rover and lander missions. The chemistry of most outcrops, rocks, and soils that have interacted with water has not been extensively changed from average Mars crustal basaltic composition. Little chemical variation suggests closed hydrologic systems were prominent on early Mars and/or the water/rock ratios were low. Open hydrologic systems occur at local scales, e.g., high Si and Ti rocks and soil deposits around a volcanic feature in Gusev crater. Geochemical and mineralogical indicators for aqueous alteration include jarosite and other Fe-sulfates at several locations suggesting acid-sulfate alteration conditions. High Si and Ti rocks, sediments, and soil deposits are consistent with basaltic residues extenively leached by extremely acidic fluids. Variations in the Fe/Mn ratio of fracture veins infilled with sulfate-rich materials suggest changes in redox and/or pH conditions of the migrating fluids. The increase of nanophase iron oxides and salts with depth in several soil pits escavated by the Spirit rovers wheel in Gusev crater suggests the translocation/mobolization of these phases by liquid water. This pedogenic process is the result of limited water movement through the surface sediments during the Amazonian period; however, it is likely that paleosols exist on Mars that formed during the early wetter history of the planet. Soil scientists have the opportunity to continue to (and should) be involved in the exploration of the Red planet.

Description: We describe the current state of knowledge about Mercury's interior structure. We review the available observationalconstraints, including mass, size, density, gravity eld, spin state, composition, and tidal response. These data enablethe construction of models that represent the distribution of mass inside Mercury. In particular, we infer radial prolesof the pressure, density, and gravity in the core, mantle, and crust. We also examine Mercury's rotational dynamicsand the inuence of an inner core on the spin state and the determination of the moment of inertia. Finally, we discussthe wide-ranging implications of Mercury's internal structure on its thermal evolution, surface geology, capture in aunique spin-orbit resonance, and magnetic eld generation.

Description: Seismicity models for Mars usually estimate the long-term average annual seismic moment rate, and also the average annual event rate. This holds for estimations based on geological evidence (Golombek et al., 1992, Golombek, 2002, Taylor et al., 2013) as well as for models based on thermal evolution and cooling of the Martian interior (Phillips, 1991, Knapmeyer et al., 2006, Plesa et al., 2018). All studies are compatible with the conclusion based on the non-observation of any unambiguous event by Viking (Anderson et al., 1977, Goins & Lazarewicz, 1979) that Martian seismicity lies somewhere between that of the Moon and that of the Earth. We developed tools to derive reasonable estimations of the annual seismic moment rate from a number of events as small as one, provided that the observed events are beyond the global completeness threshold for observable events. Numerical tests as well as evaluation of terrestrial data shows the feasibility of the approach.

Description: Pluto was discovered in 1930 at Lowell Observatory in the belated resumption of a wide-field photographic search originally be-gun at Percival Lowells direction prior to his death in 1916. Photometry in the 1950s established the rotation period of 6.4 hours and a color redder than the Sun, but the mass, density, size and albedo were unknown. Near-infrared photometry in 1976 indicated the presence of CH4 frost, suggestive of a relatively high surface albedo and a diameter comparable to the Moon. The large satellite Charon was discovered in 1978, followed by an epoch of mutual transits and occultations of Pluto and Charon from 1985 to 1990, as viewed from Earth. These events resulted in reliable sizes and masses of the two bodies, as well as the orbit of Charon. The mutual events also demonstrated that Pluto and Charon are in locked synchronous rotation and revolution, a configuration unique among the planets. The atmosphere of Pluto was discovered in 1988 from a stellar occultation observed from the Kuiper Airborne Observatory and ground stations, with indications of a haze layer (or a temperature inversion) in the lower atmosphere. Sub-sequent stellar occultations showed that the extent of the atmosphere is variable on a timescale of a few years. The spectroscopic detection of N2 and CO ice in 1993 demonstrated that the atmosphere must be primarily composed of N2, with CH4 and CO as minor components; the spectroscopic detection of gaseous CH4 was reported in 1994.

Description: With the recent estimate of Mercury's surface composition from the X-Ray Spectrometer and Gamma-Ray Spectrometer that were onboard NASA's MErcury Surface, Space ENvironment, Geochemistry and Ranging (MESSENGER) spacecraft, we now have our first opportunity to directly investigate the compositions of lavas from the planet Mercury and indirectly investigate the chemical make-up of its interior. Results from MESSENGER showed exotic surface compositions with more than 3 wt% sulfur in some lavas and relatively low amounts of iron (less than 3 wt%) across the surface. These striking features are consistent with magmatism occurring under highly reducing conditions which has an impact on the thermal and chemical evolution of a planetary body. Here we'll explore the geochemical evolution of Mercury through a series of experimental studies and discuss the implications of low oxygen fugacity on elemental behavior and magmatic processes.

Description: Mars Ascent Vehicle (MAV) Study: Design challenges associated with Mars; Remote; Temperature; Atmosphere; Radiation; Dust. Challenges unique to MAV: No vehicle has ever left the surface of Mars; Completely autonomous; Physical system extremely limited; Martian environment creates a number of issues with traditional propulsion systems.

Description: Exploration of our Solar System has revealed a number of locations that are now habitable or could have supported life in the past. One approach to finding life involves detection of informational polymers like deoxyribonucleic acid (DNA) and ribonucleic acid (RNA) that are definitive biosignatures for life as we know it. Alternatively, structural variants of DNA and RNA, collectively termed xenonucleic acids (XNAs) have been shown in the laboratory to behave similarly. Nanopore-based sequencers differ from traditional sequencing technologies in that they do not explicitly require synthesis of DNA before or during analysis. Because of this, nanopore sequencers have been used for the direct sequencing of RNA, and could be used for the detection and analysis of other charged polymers. Here we describe results of exposing the MinION hardware, flow cells, and key reagents to ionizing radiation at doses relevant to Mars and Europa missions (10 to 3000 silicon-equivalent gray).

Description: An overview of three missions connected with NASA's Goddard Space Flight Center at the present time: (1) NASA's flagship mission, the James Webb Space Telescope, is nearing its 2021 launch date. The James Webb, which is considered the successor to the Hubble Space Telescope, will orbit at the Earth-Sun Lagrangian Point Two where it will peer back in time, using infrared detectors, to the beginnings of our Universe. (2) NASA is conducting pioneering work in the field of robotic satellite servicing in earth orbit. The RESTORE-L project, which is slated for a 2021 launch date, is expected to pave the way for the inception of robotic assembly for deep space exploration as well as the commercialization of satellite servicing. (3) The Transiting Exoplanet Survey Satellite (TESS) has been orbiting the Earth actively searching for new planets since April of 2018. The discoveries that TESS has made to-date have benefited from a careful characterization of the refractive lens assemblies on its science instruments. The presentation will provide a detailed description of how the index of refraction of the glasses used to fabricate the TESS lens assemblies were measured at Goddard to an accuracy that enables the ability to make exoplanet discoveries hundreds of light years from Earth.

Description: No abstract available

Description: Geochronology: More than just rock ages. What are the constraints on the time evolution ofthe dynamic solar system? When did the outerplanets migrate and the asteroid belt lose mass? How did it affect other bodies at that time?

Description: No abstract available

Description: Absolute age determination isnecessary to check and calibratethe relative Martian chronologypresently available from meteoriticcrater counting.

Description: No abstract available

Description: OuroboroSat (also known as MRMSS: the Modular Rapidly Manufactured Spacecraft System) is a modular instrumentation platform consisting of multiple 3 inch (7.5 centimeter) square printed circuit boards that are mechanically and electrically connected to one another in order to produce a fully- functioning payload facility system. Each OuroboroSat module consists of a microcontroller, a battery, conditioning and monitoring circuitry for the battery, optional space for solar panels, and an expansion area where an experimental payload or specialized functionality (such as wireless communication submodules) can be attached.

Description: Landing space craft rocket plume exhaust interactions with the regolith surfaces on the Moon and Mars will result in cratering and regolith particle ejecta traveling at velocities up to 2,000 meters per second in the vacuum surroundings. This phenomenon creates hazards for the spacecraft that is landing or launching and may also cause damage to surrounding assets, personnel and infrastructure. One potential solution to this issue is to construct vertical takeoff and vertical landing (VTVL) pad infrastructure systems which will mitigate these rocket plume exhaust effects. Concepts will be presented for the construction and maintenance of such VTVL pads in lunar and martian environments.

Description: NASA's Determination of Offgassed Products (Test 7) from materials and assembled articles for spaceflight has evolved since the Apollo program for over 50 years to meet various habitable spacecraft nonmetallic programmatic requirements. Now mandated by NASA STD-6016A, Standard Materials and Processes Requirements for Spacecraft, all nonmetallic materials used in habitable flight compartments, with the exception of ceramics, metal oxides, inorganic glasses, and materials used in sealed containers, must meet the offgassing requirements in NASA-STD-6001B Test 7. This manuscript presents the history of Test 7, beginning with the Apollo spacecraft nonmetallic materials selection guidelines and test requirements in 1967, in which tests were performed in mostly oxygen atmospheres. It progresses through Skylab, Space Shuttle, International Space Station nonmetals testing, and acceptance requirements with milder test environments. This review of the history of Test 7 presents the reader with a perspective on the development and changes undergone since inception to the present. Related NASA standard tests (some now former, discontinued, combined, or supplemental) including Test 6, Odor Assessment, Test 16, Determination of Offgassed Products from Assembled Articles, and Test 12, Total Spacecraft Cabin Offgassing, are discussed in context

Description: Ocean worlds have thick icy shells covering subsurface oceans. Due to the potential habitability of the subsurface ocean, Europa has become a target for a potential lander mission. Seismology is the preeminent method for constraining the thickness of an icy shell. The Seismometer to Investigate Ice and Ocean Structure (SIIOS) uses flight-candidate instrumentation to develop approaches for seismic studies of icy bodies. The SIIOS team deployed small aperture seismic arrays on Gulkana Glacier in 2017 and in Northwest Greenland in 2018.

Description: The Lunar Reconnaissance Orbiter (LRO) was launched in 2009 and, with itsseven science instruments, has made numerous contributions to our understandingof the moon. LRO is in an elliptical, polar lunar orbit and nominally maintainsa nadir orientation. There are frequent slews off nadir to observe various sciencetargets. LRO attitude control system (ACS) has two star trackers and a gyro forattitude estimation in an extended Kalman filter (EKF) and four reaction wheelsused in a proportional-integral-derivative (PID) controller. LRO is equipped withthrusters for orbit adjustments and momentum management. In early 2018, thegyro was powered off following a fairly rapid decline in the laser intensity on theX axis. Without the gyro, the EKF has been disabled. Attitude is provided by asingle star tracker and a coarse rate estimate is computed by a back differencingof the star tracker quaternions. Slews have also been disabled. A new rate estimationapproach makes use of a complementary filter, combining the quaterniondifferentiated rates and the integrated PID limited control torque (with reactionwheel drag and feedforward torque removed). The filtered rate estimate replacesthe MIMU rate in the EKF, resulting in minimal flight software changes. The paperwill cover the preparation and testing of the new gyroless algorithm, both inground simulations and inflight.

Description: The thermal environment of the lunar surface is extreme. At the equator, temperatures drop ~300 K between local noon and night. Laboratory studies demonstrate that minerals common to the lunar surface (e.g.,pyroxene, olivine) show spectral changes with respect to temperature in near infrared wavelengths. Over temperature changes equivalent to the lunar thermal environment (T 300K), the reflectance of pure pyroxene samples can vary by a factor of two.

Description: Legacy of the Apollo samples is the link forged between radiometric ages of rocks and relative ages from crater counts. Lunar impact history innumerous reviews, including NVM-2.

Description: In its investigations of Vesta and Ceres, NASAs Dawn mission has returned spectacular data detailing the surfaces of these two prominent small bodies in our Solar Systems asteroid belt. In order to greatly facilitate dissemination, visualization, and analysis of this data, and public understanding of the mission, the Dawn mission has partnered with NASAs Solar System Treks Project (SSTP). SSTP has recently released an update to the Vesta Trek online portal (https://trek.nasa.gov/vesta/) and has released a new Ceres Trek portal (https://trek.nasa.gov/ceres/). This presentation will showcase the use of the Ceres Trek and Vesta Trek portals and demonstrate how they can be used to visualize and analyze particularly interesting landforms such as the pitted terrain on Vesta and relic cryovolcanoes on Ceres. We will also demonstrate the new VR capability that has been added to the portals, allowing users to generate their own virtual reality flyovers for any user-defined paths along the bodies surfaces. In addition to highlighting the portals for Ceres and Vesta, the presentation will preview additional portals being planned/developed for other small bodies. NASA and JAXA have requested the development of a portal for the asteroid Ryugu to facilitate dissemination, visualization, and analysis of data from Japans Hayabusa2 mission, and a portal for Mars moon Phobos in support of mission planning for Japans MMX mission. We are also planning a portal for the asteroid Bennu with data from the OSIRIS-Rex mission. All of these products are efforts in the NASA Solar System Treks Project (SSTP), available at https://trek.nasa.gov. NASA's Solar System Trek online portals provide web-based suites of interactive data visualization and analysis tools to enable mission planners, planetary scientists, students, and the general public to access mapped data products from past and current missions for a growing number of planetary bodies including the Moon, Mars, Vesta, etc. These portals are being used for site selection and analysis by NASA and a number of its international partners, supporting upcoming missions. In addition to demonstrating the capabilities of selected portals in this presentation, we will solicit input from the community for ideas for future enhancements to the portals.

Description: Current environmental conditions at the surface of Mars are hostile to life as we know it, but the near subsurface may well provide sufficient shielding to harbor simple life forms. This discussion focuses on methane which can be produced either abiotically or by microbial life and possible geological or biological sources for that methane in the subsurface.

Description: Mars has a sedimentary history that spans billions of years. Orbital images have allowed for the identification of vast regional sedimentary deposits that can be traced over 100s of kilometers and are 100s of meters thick including localized alluvial, deltaic, and lacustrine deposits. Detections of secondary minerals in these deposits from orbital spectroscopy suggest the aqueous history of early Mars varied as a function of space and time. Orbital observations, however, provide a simplified and incomplete picture of Mars sedimentary history because measurements for inferring sediment transport and deposition, such as lithology, grain size, and internal structures, and measurements for inferring sediment source and aqueous alteration, such as outcrop-scale mineralogic and geochemical composition and diagenetic features, cannot be identified from orbit. Rover observations have significantly enhanced our view of ancient and modern sedimentary environments on Mars, resulting in detailed reconstructions of paleo-environments and habitability.

Description: Recent work suggests that the mineralogical sequence of the Murray formation at Gale crater may have resulted from diagenetic alteration after sedimentation, or deposition in a stratified lake with oxic surface and anoxic bottom waters. Fe-containing clay minerals are common both at Gale crater, and throughout the Noachian-aged terrains on Mars. These clay minerals are primarily ferric (Fe3+), and previous work suggests that these ferric clay minerals may result from alteration of ferrous (Fe2+) smectites that were oxidized after deposition. The detection of trioctahedral smectites at Gale crater by CheMin suggests Fe2+ smectite was also deposited during the early Hesperian. However, due to their sensitivity to oxygen, Fe2+ smectites are difficult to analyze on Earth and very few saponite dissolution rates exist in the literature. To the best of our knowledge, no experiments have measured the dissolution rates of ferrous saponites under oxidizing and reducing conditions. In order to better understand the characteristics of water-rock interaction at Gale crater, particularly the oxidation state, we report our results to date on ongoing syntheses of ferrous and magnesium saponites and dissolution experiments of natural saponite under ambient conditions. Future experiments will include the dissolution of synthetic ferric, ferrous, and magnesium saponites under oxidizing and anoxic conditions at a range of pH values.

Description: Abundant evidence for liquid water exists at Gale crater, Mars. However, the characteristics of past water remain an area of active research. The first exposures of the Murray formation in Gale crater, Mars (Fig. 1) were studied with four samples analyzed using CheMin: Buckskin, Telegraph Peak, Mojave, and Confidence Hills. Analyses indicate differences in mineralogy and chemistry between the samples which have been attributed to changes in pH and oxidation state of depositional and diagenetic environments. Recent work also suggests that hydrothermal fluids may have been present based on the presence of Se, Zn, Pb, and other elements.

Description: Visible/near-infrared (VNIR) reflectance spectra of both Mars [1] and the Moon [2] include hydration bands that vary across the planet and are not well explained in some cases. Poorly crystalline phases have been found at ~30-70 wt.% by CheMin in Gale crater, Mars in all samples measured to date [3]. Here we report on VNIR reflectance spectra of a large collection of amorphous and poorly crystalline materials. These include opal, allophane, imogolite, iron hydroxides/ oxyhydroxides (FeOx), and several synthetic materials containing Si, Al and/or Fe. All of these contain hydration bands due to water and OH that can be used to identify these materials remotely on planetary bodies.

Description: Microbial contamination is of particular interest to geological curation as many microorganisms can change mineral composition and produce compounds used as biosignatures used for the detection of life. Microbial cells can change the mineral composition of rocks through organic acid production and direct enzymatic oxidation/reduction of transition metals. Enzymatic oxidation of iron and manganese can occur at a rate several orders of magnitude faster than under abiotic conditions and produce highly reactive nanoparticle- sized oxides that can react and sorb other metals and organic compounds. Many fungi can also produce organic acids that dissolve and chelate mineral matrices chemically reducing and dissolving rock surfaces. Finally, several common soil-associated bacteria and fungi produce secondary metabolites that contain unusual amino acid analogs and non-ribosomal peptides containing both L- and D- chirality used in characterizing carbonaceous chondrites and the detection of extraterrestrial life.

Description: We have characterized the mineralogy, textures, bulk compositions, modal abundances and some mineral compositions in a suite of approximately 140 refractory inclusions from the MIL090019 carbonaceous chondrite. All of these 140 inclusions are found in a single thin section of this CO3.1 chondrite. These inclusions range from grossite- and hibonite-rich varieties, melilite-, spinel-, fassaite-diopside- and anorthite-rich types, and include a subset of aluminous AOAs (amoeboidal olivine aggregates). Grossite- and hibonite-bearing inclusions were discussed briefly in previous abstracts. X-ray mapping by energy dispersive spectrometry has permitted us to extract the bulk compositions of these inclusions from hyperspectral x-ray datasets. The bulk compositions of these inclusions represent the full range of recognized CAI (Calcium-Aluminumrich Inclusions) types.

Description: Comets are time capsules from the birth of our Solar System that record pre-solar history, the initial stages of planet formation, and the sources of prebiotic organics and volatiles for the origin of life. These capsules can only be opened in laboratories on Earth. CAESAR (Comet Astrobiology Exploration Sample Return)s sample analysis objectives are to understand the nature of Solar System starting materials and how these components came together to form planets and give rise to life. Examination of these comet nucleus surface samples in laboratories around the world will also provide ground truth to remote observations of the innumerable icy bodies of the Solar System.

Description: The Orion European Service Module - Structural Test Article (E-STA) underwent sine vibration testing in 2016 using the Mechanical Vibration Facility (MVF) multi-axis shaker system at NASA Glenn Research Centers (GRC) Plum Brook Station (PBS) Space Power Facility (SPF). The main objective was to verify the structural integrity of the European Service Module (ESM) under sine sweep dynamic qualification vibration testing. A secondary objective was to perform a fixed-base modal survey, while E-STA was still mounted to MVF, in order to achieve a test correlate the finite element model (FEM). To facilitate the E-STA system level correlation effort, a building block test approach was implemented. Modal tests were performed on two major subassemblies, the crew module/launch abort structure (CM/LAS) and the crew module adapter (CMA) mass simulators. These subassembly FEMs were individually correlated and then integrated into the E-STA FEM prior to the start of the E-STA sine vibration test. This paper summarizes the modal testing and model correlation efforts of both of these subassemblies and how the building block approach assisted in the overall correlation of the E-STA FEM. This paper will also cover modeling practices that should be avoided, recommended instrumentation positioning on complex structures, and the importance of the FEM geometrically matching CAD in sufficient detail in order to adequately replicate internal load paths. The goal of this paper is to inform the reader of the hard earned lessons learned and pitfalls to avoid when applying a building block test approach.

Description: Olivine-hosted melt inclusions (MIs) may retain trapped parent magma compositions as well as record progressive differentiation while magmas crystallize and ascend towards the surface [1,2 and references therein]. Major element compositions of the MIs, especially Fe and Mg, can be affected by post-entrapment re-equilibration with their host olivine [1,2]. Therefore, Fe/Mg ratio correction is required to obtain MI bulk compositions following equilibrium with their host olivine. Partition coefficients of most of the trace elements in olivine are very low (i.e. DOL/melt〈0.001). Thus, ratios of trace elements of olivine-hosted MIs are unlikely to be affected by post-entrapment re-equilibration and no correction is necessary [2]. Hence, tracking trace element behavior in MIs may constrain the composition of the parent magma and its evolution yielding insights on magma differentiation of shergottites. However, analyzing MIs for chemical compositions is a challenging task due to their low abundances and small sizes. Using a highly sensitive and precise micro-beam technique is essential to examine olivine-hosted MIs in order to measure trace element abundances. For this purpose, laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) is an excellent tool due to its wide range of laser spot sizes (1-150 m), ability to obtain raster analysis (several mm2) and lower detection limits (0.1 ppb) [3].

Description: The Phoenix Scout Lander mission investigated the north polar region of Mars in 2008 with the goal to study the history of water, assess the past/present Martian climate, search for organics, and evaluate the potential for past/present microbial habit-ability on Mars. To accomplish this goal, the Phoenix Landers Thermal and Evolved-Gas Analyzer (TEGA) instrument assessed the gas composition of the Martian atmosphere and evaluated the mineralogy of the Martian regolith. The TEGA instrument consisted of eight small ovens connected to a 4 channel magnetic sector mass spectrometer. The ovens heated soil samples from ambient to 1000C where the gases (e.g., H2O, CO2, etc.) evolved from thermal decomposition of mineral phases were analyzed by the mass spectrometer. Minerals thermally decomposed at characteristic temperatures and the evolving gases indicated the presence of perchlorate, carbonate, and hydrated phases in the Phoenix landing site soils.

Description: No abstract available

Description: We study the orbital architectures of planetary systems orbiting within 1 AU of their stars by analyzing the ensemble of Kepler systems having two or more planet candidates. We use data from the entire Kepler mission, and in many cases we apply improved analysis techniques (e.g., replacing histograms by top-hat Kernel Density Estimators that avoid the loss of information resulting from choosing a particular phase for the bin boundaries) to extend and enhance the studies of Lissauer et al. (2011, ApJS 197, 8) and Fabrycky et al. (2014, ApJ 790, 146).These data show ~ 1700 transiting planet candidates in 〉 600 multiple-planet systems, far more than were available for our previous two studies. The increased numbers and better information about planetary radii and the properties of stellar hosts made possible by Gaia DR2 allow more statistically-robust analyses of the entire ensemble of Kepler multis as well as independent analyses of subsets of the population. We are thus able to contrast the dynamical configurations of small and large planets, short-period and longer-period planets, and planets orbiting various types of host stars. We reinforce our previous findings that most pairs of planets within the same system are neither in nor near low-order mean motion resonances and that there is a substantial excess of planets having period ratios slightly larger than those of first-order mean-motion resonances. However, neglecting three systems whose planets are locked in 3- body resonances and summing over all first-order mean motion resonances, the deficit of planet pairs with period ratios just narrow of resonance is as large as the excess of planets wide of resonance (within statistical uncertainties), suggesting that overall there is no overall excess of planet pairs in the vicinity of resonance. Other aspects of our study, including estimates of the typical relative inclinations of planetary orbits and their variations as functions of orbital period, planet sizes and stellar properties, are in progress, with results expected to be available for presentation by the time of the conference.

Description: Advances in Entry Systems Technologies -- Continuing the Ames' Innovation Heritage" will provide an overview of recent accomplishments in the areas of entry systems, TPS materials, arcjet testing, etc.Hypervelocity Entry is a Hard Problem !Use of atmospheric drag is the most efficient way to slow down. Protection fromthe entry heating demands comprehensive understanding of the hypervelocity,reacting flow (aero-thermodynamics), and selection, design, testing and verificationof the integrated entry system, especially thermal protection system.

Description: Atomic oxygen erosion of polymers in low Earth orbit (LEO) poses a serious threat to spacecraft performance and durability. Forty thin film polymer and pyrolytic graphite samples, collectively called the PEACE (Polymer Erosion and Contamination Experiment) Polymers, were exposed to the LEO space environment on the exterior of the ISS for nearly four years as part of the Materials International Space Station Experiment 1 & 2 (MISSE 1 & 2) mission. The purpose of the MISSE 2 PEACE Polymers experiment was to determine the atomic oxygen (AO) erosion yield (E(sub y), volume loss per incident oxygen atom) of a wide variety of polymers exposed to the LEO space environment. The Ey values were determined based on mass loss measurements. Because many polymeric materials are hygroscopic, the pre-flight and post-flight mass measurements were obtained using dehydrated samples. To maximize the accuracy of the mass measurements, obtaining dehydration data for each of the polymers was desired to ensure that the samples were fully dehydrated before weighing. A comparison of dehydration and rehydration data showed that rehydration data mirrors dehydration data, and is easier and more reliable to obtain. Tests were also conducted to see if multiple samples could be dehydrated and weighed sequentially. Rehydration curves of 43 polymers and pyrolytic graphite were obtained. This information was used to determine the best pre-flight, and post-flight, mass measurement procedures for the MISSE 2 PEACE Polymers experiment, and for subsequent NASA Glenn Research Center MISSE polymer flight experiments.

Description: One important observation from the recent Ice Giants Study sponsored by NASA was that the predicted and margined thicknesses of HEEET (new NASA TPS technology) were much greater than could be woven with the currently established loom capabilities. Since the cost of a loom upgrade would be substantial, the present work explores the entry trajectory space to determine what combinations of entry parameters would result in HEEET thicknesses that fit within the existing loom infrastructure. Toward this end, the entry trajectory space, parameterized by ballistic coefficient and entry flight path angle, was systematically explored for 45 sphere-cone geometries of 3 different radii 0.2 m, 0.3 m, and 0.4 m which covered the range from Galileo-derived probes considered in the Ice Giants Study, and a follow-on study on the possibility of using a single probe architecture (in terms of size and mass) for various destinations, including Venus, Saturn, Uranus, and Neptune. The entry velocities, latitudes, and azimuths at Uranus and Neptune used in the present work were taken from the Ice Giants Study. For each 3D OF trajectory generated by a NASA Ames in-house code, TRAJ, the material response and thickness were computed using another NASA Ames code, FIAT, along with a margins policy proposed by the HEEET project. In the present work, ballistic coefficients ranging from 200 kg/sqm to 350 kg/sqm were considered along with entry flight path angles ranging from -16 to -36 (primarily to allow deceleration loads to vary between 50 g and 200 g).

Description: No abstract available

Description: No abstract available

Description: No abstract available

Description: No abstract available

Description: No abstract available

Description: Images of asteroid (101955) Bennu acquired by the OSIRIS-REx mission reveal a rocky world covered in rubble; Shape deviates from hydrostatic surface; Internal friction and/or cohesion even if no tensile strength; Understanding the deviation of the surface from idealized shape may help constrain mechanical properties of the interior; Geologic evolution of Bennu is driven by downslope migration of surface material and rubble; May be caused by YORP-induced spin-up, re-accumulation, impact-induced seismic shaking, thermal stresses, or tidal disruption by close encounters to larger bodies.

Description: This book chapter describes the issues surrounding managing planetary dust during surface operations. It summarizes the effects of dust on surface operations, the effects of planetary surface environments on dust transport, and a snapshot of current dust mitigation technologies.

Description: Spacecraft charging can occur when a spacecraft vehicle is subject to space plasma environments and varying sunlit conditions. The trajectory of the spacecraft will determine the specific impinging environment while the spacecraft geometry and material properties determine the susceptibility to various charging issues. In general, spacecraft charging is separated into two categories, surface charging (~〈100 keV) and internal charging (~〉100keV).

Description: Planetary entry vehicles employ ablative TPS materials to shield the aeroshell from entry aeroheating environments. To ensure mission success, it must be demonstrated that the heat shield system, including local features such as seams, does not fail at conditions that are suitably margined beyond those expected in flight. Furthermore, its thermal response must be predictable, with acceptable fidelity, by computational tools used in heat shield design. Mission assurance is accomplished through a combination of ground testing and material response modelling. A material's robustness to failure is verified through arcjet testing while its thermal response is predicted by analytical tools that are verified against experimental data. Due to limitations in flight-like ground testing capability and lack of validated high-fidelity computational models, qualification of heat shield materials is often achieved by piecing together evidence from multiple ground tests and analytical simulations, none of which fully bound the flight conditions and vehicle configuration. Extreme heating environments (〉2000 W/sq. cm heat flux and 〉2 atm pressure), experienced during entries at Venus, Saturn and Ice Giants, further stretch the current testing and modelling capabilities for applicable TPS materials. Fully-dense Carbon Phenolic was the material of choice for these applications; however, since heritage raw materials are no longer available, future uses of re-created Carbon Phenolic will require re-qualification. To address this sustainability challenge, NASA is developing a new dual-layer material based on 3D weaving technology called Heat shield for Extreme Entry Environments (HEEET). Regardless of TPS material, extreme environments pose additional certification challenges beyond what has been typical in recent NASA missions. Scope of this presentation: This presentation will give an overview of challenges faced in verifying TPS performance at extreme heating conditions. Examples include: (1) Bounding aeroheating parameters (heat flux, pressure, shear and enthalpy) in ground facilities. How to certify TPS if environments can't be bounded or aeroheating parameters can't be simultaneously achieved. (2) Higher uncertainties in ground test environments (facility calibration and analytical predictions) at extreme conditions. (3) Testing in flows similar to planetary atmosphere composition (H2/He for Gas and Ice Giants). (4) Test sample size limitations for qualifying seam designs. (5) Lack of computational tools capable of simulating all significant aspects of TPS performance (including initiation and propagation of failures). This presentation will provide recommendations on how the EDL community can address these challenges and mitigate some of the risks involved in flying TPS materials at extreme conditions. Examples include: (1) Dedicated activity to understanding TPS failure modes. Develop computational tools capable of modelling fluid interaction with material's thermostructural response. Validate these tools through failure testing. A better understanding of failure mechanisms may eliminate the need to fully bound all aeroheating parameters in ground testing. (2) Enhancements to current testing facilities to simulate flight-like ablation mechanism (ex. testing in Nitrogen at Ames Interaction Heating Facility to limit oxidation in favor of more sublimation). (3) Improved characterization of test conditions with new diagnostic methods and determination of environment uncertainty through rigorous statistical analysis of available data. (4) Design margin policies that are directly tied to uncertainties in ground test environments and modelling fidelity

Description: Among the 1800 Kepler targets that have candidate planets, 20% have two or more candidate planets. While most of these objects have not yet been confirmed as true planets, several considerations strongly suggest hat the vast majority of these multi-candidate systems are true planetary systems. Virtually all candidate systems are stable, as tested by numerical integrations (assuming a nominal mass-radius relationship). Statistical studies performed on these candidates reveal a great deal about the architecture of planetary systems, including the typical spacing of orbits and flatness of planetary systems. The distribution of observed period ratios shows that the vast majority ofcandidate pairs are neither in nor near low-order mean motion resonances. Nonetheless, there are small but statistically significant excesses of candidate pairs both in resonance and spaced slightly too far apart to be in resonance, particularly near the 2:1 resonance. The characteristics of the confirmed Kepler multi-planet systems will also be discussed.

Description: Fine-grained, spinel-rich Ca-Al-rich inclusions (FGIs) in carbonaceous chondrites, mostly CV3 chondrites, are interpreted as aggregates of nebular gas-solid condensates that escaped significant melting [1]. Multiple lines of evidence suggest a condensation origin for FGIs, including their layered structures and irregular shapes and the fine grain size of numerous spinel-cored nodules [e.g., 2,3], and the distinctive volatility-fractionated group II rare earth element patterns of bulk inclusions and their mineral constituents [e.g., 4,5]. The origin and nature of FGIs are poorly constrained because of their fine grain sizes and intimate intergrowths of refractory phases, combined with their susceptibility to secondary parent body alteration processes, making detailed mineralogical and petrologic characterizations difficult using scanning electron microscope (SEM) and electron microprobe techniques. In this study, we present preliminary transmission electron microscope (TEM) analyses of pristine FGIs from the reduced CV3 chondrite Efremovka in order to provide the detailed characterization of their micrometer- to nanometer-scale textures and chemical compositions. Our goals are to better understand the formation processes and conditions of FGIs in the early solar nebula and to explore their possible genetic relationship with other early-formed refractory inclusions and their rims.

Description: The Sample Analysis at Mars (SAM) instrument on the Mars Science Laboratory (MSL) rover Curiosity has analyzed 3 scooped samples and 15 drilled samples since landing in 2012. Oxychlorine compounds (perchlorate/chlorate) were detected in the first 9 drilled samples but have not been detected in the last 6, starting with the Oudam sample in the Hartmanns Valley member of the Murray formation (Table 1). Scooped samples have all contained detectable oxychlorine. These results suggest that oxychlorine formation and preservation spans the geologic record on Mars but has not been uniform spatially or temporally.

Description: Over the last decade, various datasets have shown evidence for unexpected Noachian felsic materials at the surface of Mars. The Martian meteorite NWA 7034, also well-known as Black Beauty, has been identified as a regolith breccia containing mafic clasts along with remarkable felsic igneous clasts dated at 4.43 Gyr and classified as monzonitic [1-2]. In addition, the Curiosity rover has been analyzing felsic materials within Gale crater since its landing in 2012 [3-4]. The X-ray diffractometer (XRD) in the CheMin instrument and the laser induced breakdown spectrometer (LIBS) ChemCam onboard Curiosity identified plagioclase and K-spar along with augite and pigeonite [3-5]. In sedimentary rocks, those minerals are detrital, coming from a magmatic source of Noachian age that was sufficiently evolved to form K-spar [1,6]. Several igneous materials analyzed by Chem- Cam have been classified as part of the alkaline trend including Harrison, a trachy-andesite [7].

Description: The Mars Science Laboratory (MSL) Curiosity rover has spent the last two years investigating a prominent resistant ridge, informally named the Vera Rubin Ridge (VRR), at the base of Mount Sharp (Aeolis Mons). The ridge has been a high priority science target for the MSL mission since landing in Gale crater more than 6 years ago because of the detection of a strong hematite spectral signature, and its distinct topography. Examining the chemistry of the ridge can aid in determining the relationship to other rocks analyzed during the rover traverse, specifically the Murray formation (fm) encountered below the ridge. We can also determine compositional trends with elevation and/or laterally within the ridge, and whether spectral properties observed on the ridge, both from orbit and in situ, correspond with changes in chemistry. The composition of the ridge, combined with mineralogy of drilled samples, can help to elucidate bigger picture questions regarding depositional environment, possible changing lake water chemistry and diagenetic/alteration history.

Description: Recent analyses of X-ray diffraction (XRD) data from the CheMin instrument using the FULLPAT program have documented the presence of X-ray amorphous materials at multiple sites within Gale Crater, Mars. These materials are believed to be to be iron-rich based on chemical data, and at least some of them are believed to be weathering products based on volatile contents. However, the characteristics of these proposed Fe-rich weathering products remain poorly understood. To better understand these X-ray amorphous materials on Mars, we are 1) examining weathering products formed on Fe-rich parent material in terrestrial soils across a range of climatic conditions, and 2) performing burial experiments of Fe- and Mg- rich olivine in these soils. We describe each of these approaches below.

Description: Drill fines created by the Curiosity rover at Gale Crater, Mars have exhibited variable visible/near-infrared spectral features attributable to the presence of ferrous and ferric minerals. Drilled locations within the Murray formation and on the Vera Rubin Ridge (VRR) were shown by the CheMin instrument to contain significant amounts of hematite. However, typical hematite spectral features (e.g., absorptions near 530 nm and 860 nm) have varied inconsistently with hematite abundances. This suggests that other factors such as hematite grain size or crystallinity, the presence of amorphous materials, and/or photometric effects play a role in the observed spectra. Using laboratory spectra of hematite acquired at difference grain sizes, we document the variability in key spectral features. We also compare spectral parameters computed from Mastcam spectra on Mars of three hematite-bearing ChemCam calibration target (CCCT) samples with known hematite and amorphous material abundances.

Description: The presence of solar flare particle tracks in mineral grains within interplanetary dust particles (IDPs) has long been accepted as proof of their extraterrestrial origin [e.g. 1]. The 10-20 micrometers diameter IDPs released by dust producing objects in the solar system (mainly comets and asteroids) spiral in towards the Sun under the influence of Poynting-Robertson (PR) drag forces [2] and accumulate solar flare energetic particle tracks during their journey. The number of IDPs with well-constrained track density measurements is small, owing to the difficulty in the measurements and the lack of appropriatelysized crystals in which to image them. In order to use track densities as a chronometer of space exposure, the track production rate must be known. All previous work relied on track production rates determined by chemical etching techniques [e.g. 3], but tracks in IDPs are measured using TEM imaging. Here we report measurements of track densities in IDPs from both the anhydrous and hydrated IDP groups. Using the track production calibration determined from TEM observations of anorthite and olivine in lunar rock 64455 [4] we estimate space exposure times for these IDPs to constrain their parent body sources.

Description: Volcanic surfaces are common and varied throughout the terrestrial planets. Remote spectroscopy is often the only method for determining surface chemistry and mineralogy of such provinces, and is thus critical for understanding petrologic processes and constraining planetary interior evolution and chemistry. Natural volcanic systems exhibit variability in magmatic chemical evolution, crystallinity, oxidation, and eruption-related alteration (e.g. hydrothermal). The extent to which spectroscopy can identify these characteristics alongside each other is thus a key question for interpreting volcanic processes from orbit. While the effects of each of these on visible/near infrared (VNIR) and thermal infrared (TIR) spectra of igneous rocks has been studied separately to varying degrees, their combined spectral effects (and interpretability of such spectra) are understudied.

Description: Vera Rubin Ridge (VRR) in Gale Crater, Mars, is a ~200 m wide ~6.5 km long northeast- southwest resistant geomorphological feature on the northern slopes of Aeolis Mons (Mt. Sharp). Analysis of Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) orbital data showed that VRR has strong hematite spectral signatures. Hematite was confirmed in-situ at VRR with the Curiosity rover and has been shown to be present throughout the Mur- ray formation. VRR is stratigraphically continu-ous with the underlying Murray formation. Previous thermochemical modelling showed how hematite at VRR could have formed as the result of open-system weathering at high water/rock ratios. Here we use thermochemical modelling to investigate possible reaction pathways for the hematite-clay- bearing assemblage observed at VRR, starting from an identified least-altered (minimum clay content) Murray composition, and a Mars basal brine.

Description: Since the beginning of the Mars Science Laboratory (MSL) mission, Vera Rubin Ridge (VRR) has been a location of interest to the MSL science team because of its apparent erosional resistance and strong near-IR (~860 nm) absorption feature seen from orbit in the Mars Reconnaissance Orbiter mission's Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) data. The strong CRISM absorption feature along VRR was hypothesized to be primarily associated with an increased abundance of crystal-line hematite compared to lower Mt. Sharp units. How-ever, surface multispectral and mineralogic data, from the Mastcam and CheMin instruments onboard the Curiosity rover, suggest hematite is not the only mineral contributing to the near-IR absorption feature measured in VRR or the reason for its relative hardness.

Description: Carbonate minerals are germane to questions involving volatile and climate history on Mars [e.g., 1-2]. In particular, the abundance of carbonate-bearing minerals can provide broad useful bounds on the amount of CO2 out-gassed into the atmosphere over its history and their spatial distribution and mineralogy can yield constraints on the environments in which they were produced. Earth-based, orbital, and landed spectral observations provide evidence for the presence of carbonates in the Martian environment [3-6]. Infrared observations made from spacecraft near Mars were interpreted to indicate the presence of carbonates. [6] associated the carbonates with the surface dust and interpreted the mineralogy as being consistent with magnesite (MgCO3). Near- infrared observations from Mars orbit have been interpreted to suggest magnesite outcrops in restricted locations [7-9]. Quantitative estimates of the abundance of carbonates on Mars range from 0-3% [3], 2-5% [6], less than a few percent [10], and 〈10% [8]. With the growing evidence for magnesite on Mars additional quantitative estimates can be provided via theoretical modeling of the reflectance from the Martian surface. Calcite (CaCO3) and dolomite ((Ca,Mg)CO3) are identified in Asian dust [2-17%], [10] and calcite in Saharan dust [~8-10% [12-15]. The importance of op- tical constants at visible and near-infrared wavelengths as proxies for estimating the effects at infrared wave- lengths, has been investigated [15]. The growing evidence for Mg-carbonates on Mars, the presence of calcite and dolomite in terrestrial aero- sols, and general lack of optical constants for these materials in the visible- to mid-infrared (VMIR, ~0.3-6 m) has motivated the current effort to estimate the optical constants of calcite, dolomite, and magnesite in the VMIR.

Description: Germanium (Ge) and Zn enrichment in martian sedimentary rocks has been reported from rocks at Gale Crater, showing concentrations of Ge from tens to hundreds ppm [1]. The Ge concentrations in martian meteorites are significantly lower (0.5-2.5 ppm) [2]. Our recent studies [3-4] have revealed that Ge is lost from shergottites due to volatility. Recent experimental studies confirm that Ge and Zn are both significantly volatile under magmatic conditions [5-7]. Further, Ge is moderately incompatible during magmatic differentiation [8] so Ge contents in olivines or pyroxenes increase during igneous fractionation in nakhlites and chassignites [4]. Shergottites for which Ge abundances had been determined included rocks with ages of 150-600 Ma, while the enrichments reported from Gale Crater rocks likely occurred over 3 Ga ago. The recent discovery of two unpaired ancient (2.4 Ga) depleted shergottites, NWA 7635 [9] and NWA 8159 [10], afforded the prospect of obtaining an extended history of martian volcanic outgassing. Both of the ancient shergottites are depleted in incompatible elements and share a similar GCR exposure age to younger depleted shergottites implying derivation from a single, long-lived (〉2 Ga) volcanic center [9].

Description: Vibration testing spaceflight hardware is a vital, but time consuming and expensive endeavor. Traditionally modal tests are performed at the component, subassembly, or system level, preferably free-free with mass loaded interfaces or fixed base on a seismic mass to identify the fundamental structural dynamic (modal) characteristics. Vibration tests are then traditionally performed on single-axis slip tables at qualification levels that envelope the maximum predicted flight environment plus 3 dB and workmanship in order to verify the spaceflight hardware can survive its flight environment. These two tests currently require two significantly different test setups, facilities, and ultimately reconfiguration of the spaceflight hardware. The vision of this research is to show how traditional fixed-base modal testing can be accomplished using vibration qualification testing facilities, which not only streamlines testing and reduces test costs, but also opens up the possibility of performing modal testing to untraditionally high excitation levels that provide for test-correlated finite element models to be more representative of the spaceflight hardware's response in a flight environment. This paper documents the first steps towards this vision, which is the comparison of modal parameters identified from a traditional fixed-based modal test performed on a modal floor and those obtained by utilizing a fixed based correction method with a large single-axis electrodynamic shaker driving a slip table supplemented with additional small portable shakers driving on the slip table and test article. To show robustness of this approach, the test article chosen is a simple linear weldment, whose mass, size, and modal parameters couple well with the dynamics of the shaker/slip table. This paper will show that all dynamics due to the shaker/slip table were successfully removed resulting in true fixed-base modal parameters, including modal damping, being successfully extracted from a traditional style base-shake vibration test setup.

Description: Space structures are one of the most critical components for any spacecraft, as they must provide the maximum amount of livable volume with the minimum amount of mass. Deployable structures can be used to gain additional space that would not normally fit under a launch vehicle shroud. This expansion capability allows it to be packed in a small launch volume for launch, and deploy into its fully open volume once in space. Inflatable, deployable structures in particular, have been investigated by NASA since the early 1950s and used in a number of spaceflight applications. Inflatable satellites, booms, and antennas can be used in low-Earth orbit applications. Inflatable heatshields, decelerators, and airbags can be used for entry, descent and landing applications. Inflatable habitats, airlocks, and space stations can be used for in-space living spaces and surface exploration missions. Inflatable blimps and rovers can be used for advanced missions to other worlds. These applications are just a few of the possible uses for inflatable structures that will continued to be studied as we look to expand our presence throughout the solar system.

Description: Plans call for human cislunar operations and lunar surface access, to prepare for eventual Mars missions. NASA will also develop new opportunities in lunar orbit that provide the foundation and act as a gateway for human exploration deeper into the solar system. Current human spaceflight is complex and requires as many as fifty people to support the International Space Station (ISS) Mission Control Center (MCC) in Houston, Texas. These flight controllers in the front and back rooms of the MCC, serve as an extra pair of eyes overseeing the numerous station systems. Deep space missions - to the moon, Mars, and beyond - will be more complex and place challenging mission constraints on the crew. As the round-trip communication delays increase in deep space exploration, more on-board systems autonomy and functionality will be needed to maintain and control the vehicle. These mission constraints will change the Earth-based ground control approach and will demand efficient and effective human-computer interfaces (HCI) to control a highly complex vehicle or habitat system. All of this necessitates a different approach to designing and developing spacecraft and habitats. In the beginning of new human spaceflight programs, focus is typically on launch vehicle and uncrewed spacecraft design and development. The reasoning behind this focus to enable flight testing of an integrated launch vehicle and spacecraft system to ensure it will be safe enough to allow humans on board. This is an essential process for new spacecraft, however, the practical effect is a lack of funding for the spacecrafts human interfaces development. It can be many years before the human interface development begins, putting it late in the spacecraft lifecycle, when almost all other spacecraft systems and subsystems are already in place. This forces the usage of existing and proven technologies for the HCI interfaces. We posit that putting the human first in a spacecraft design process will yield a more effective spacecraft for exploration and long duration missions. NASA Human Research Program (HRP) has identified inadequate HCI as a risk for future missions. New tools and procedures to aid the crew in operating a complex spacecraft will be required. This paper discusses ongoing activities in the development of the next generation HCI components and systems, and a new approach toward human interfaces for spacecraft.

Description: Mars exploration is one of the major current scientific breakthroughs. NASA is actively developing its Mars Exploration Program through several rovers and orbiters to better understand the origin and current conditions of the Red Planet. Since Mars is more Earth-like than any other planet, understanding its formation and evolution could enable to better understand our own origin. Mars is also considered as a future destination for survival of humankind, assuming our ability to face remaining technical challenges, such as radiation risks, extreme conditions, food and medicine supplies. The recent evidence of liquid water on Mars suggests that life could exist, and will be seeked by NASA Mars 2020 rover. Thus, Mars exploration opens remarkable perspectives towards the discovery of new resources and the humanity's expansion. But this tremendous potential also implies completely new questions: what will happen to the Earth if humans are able to escape from global warming and pollution? How will the Martian land be shared between Nations? Will it be impacted by political conflicts on the Earth? If life exists on Mars, will it be compatible with humans? As we get closer to Mars colonization every day, these questions should be addressed and considered as a new chance to envision a world that could benefit from the lessons of History. So, in addition to technical and scientific progress, Mars exploration gives us the chance to redefine our society as a whole.

Description: Astronauts on a mission to Mars will require several vehicles working together to get to Mars orbit, descend to the surface of Mars, support them while theyre there, and return them to Earth. The Mars Ascent Vehicle (MAV) transports the crew off the surface of Mars to a waiting Earth return vehicle in Mars orbit and is a particularly influential part of the mission architecture because it sets performance requirements for the lander and in-space transportation vehicles. With this in mind, efforts have been made to minimize the MAV mass, and its impact on the other vehicles. A minimal mass MAV design using methane and in situ generated oxygen propellants was presented in 2015. Since that time, refinements have been made in most subsystems to incorporate findings from ongoing research into key technologies, improved understanding of environments and further analysis of design options. This paper presents an overview of the current MAV reference design used in NASAs human Mars mission studies, and includes a description of the operations, configuration, subsystem design, and a vehicle mass summary.

Description: NASA's Determination of Offgassed Products (Test 7) from materials and assembled articles for spaceflight has evolved since the Apollo program for over 50 years to meet various habitable spacecraft non-metallic programmatic requirements. Now mandated by NASA-STD-6016B Standard Materials and Processes Requirements for Spacecraft, all nonmetallic materials used in habitable flight compartments,with the exception of ceramics, metal oxides, inorganic glasses, and materials used in sealed containers must meet the offgassing requirements of in NASA-STD-6001B Test 7. This manuscript presents the history of Test 7 beginning with the Apollo spacecraft nonmetallic materials selection guidelines and test requirements in 1967

Description: Overview - What we know: Volcanically derived volatiles; Timing of volatile release; Current observations of lunar polar volatiles - How volatiles migrated on the Moon - Thickness of resulting deposits - Implications for the current distribution of lunar volatiles.

Description: Characterizing the structure and composition of phyllosilicates is important for interpreting the aqueous history of Mars and identifying potential habitable environments. Smectites and chlorites are the most dominant clay types on Mars, and there is evidence of the presence of smectite/chlorite intergrades. Smectite has been detected at Gale Crater, Mars, via orbital observations and in-situ measurements, in abundances up to approximately 25 weight percentage of bulk rock. John Klein (JK) and Cumberland (CB) were analyzed by the Chemistry and Mineralogy (CheMin) and Samples Analysis at Mars (SAM) evolved gas analysis experiment (EGA) instruments, onboard Mars Science Laboratory (MSL), Curiosity, to distinguish clay mineralogy. John Klein has a collapsed 2:1 smectite with a d-spacing of 10 Angstroms, whereas Cumberland smectite did not fully collapse and has a d-spacing of approximately 13.2 Angstroms. It has been suggested that partial chloritization or pillaring could be responsible for the expanded Cumberland smectite because pillaring inhibits the collapse of smectites down to 10 Angstrom, even under the desiccating conditions on the martian surface. Clay minerals have been detected in ancient fluvio-lacustrine rocks throughout Curiositys traverse and catalog the changes of the lake water chemistry and diagenetic conditions at Gale Crater, Mars. Investigating clay minerals is important for identifying them on the Martian surface, in particular as Curiosity proceeds into the upcoming Clay-bearing Unit.

Description: In some impact melt (IM) glasses in the shergottites such as EET79001, Shergotty and Tissint, recently showed that secondary mineral assemblages having large sulfur excesses cannot be produced in-situ by impact shock melting of the host rock constituents. Instead, these putative secondary minerals inferred to be present in IM glasses were produced somewhere else in the shergottite source region and were subsequently mobilized into the host rock voids (by lava erosion or aolian activity) prior to impact ejection. In this abstract, we examine the aqueous conditions (pH and water/rock ratios) under which the acid sulfate solutions could have interacted with the primary minerals in the basaltic rocks and precipitated the secondary minerals such as Fe-sulfates in some cases and Ca- and Al-sulfates in other cases under favorable conditions at the shergottite provenance on Mars.

Description: The Johnson Space Center Rocknest (JSC-RN) simulant was developed in response to a need by NASA's Advanced Exploration Systems (AES) In Situ Resource Utilization (ISRU) project for a simulant to be used in component and system testing for water extraction from Mars regolith. JSC-RN was de-signed to be chemically and mineralogically similar to material from the aeolian sand shadow named Rocknest in Gale Crater, particularly the 1-3 weight percentage water release as measured by the Sample Analysis at Mars (SAM) instrument. Rocknest material is a proxy for average martian soils, which are unconsolidated and could be easily scooped by rovers or landers in order to extract water. One way in which water can be extracted from aeolian material is through heating, where adsorbed and structural water is thermally removed from minerals. The water can then be condensed and used as drinking water or split and used as propellant for spacecraft or as a source of breathable O2. As such, it was essential that JSC-RN contained evolved gas profiles, especially low temperature water (less than 400 degrees Centigrade), that mimicked what is observed in martian soils. Because many of these ISRU tests require hundreds of kilograms of Mars soil simulant, it was essential that JSC-RN be cost-effective and based on com-ponents that could be purchased commercially (i.e., not synthesized in the lab). Here, we describe the JSC-RN martian soil simulant, which is ideal for large-scale production and use in ISRU water extraction studies.

Description: Carbonate minerals of martian origin are present in several martian meteorites in trace concentrations (less than 1 percent) and possess unique isotopic signatures that suggest that the martian environment and/or isotopic reservoirs are very different from the Earths. Carbonates are most common in the older martian meteorites (ALH 84001 and the nakhlites), however, there have been reports of carbonate in the younger shergottites including EETA 79001 (Mars meteorite Elephant Moraine 79001). Acidification studies of Zagami and Shergotty have shown that CO2 is released suggesting that carbonate phases are present in these meteorites, but the origin of these phases is controversial. The young ages of the shergottites makes them important samples for understanding the modern martian environment. The carbonates in EETA 79001 are the best-characterized secondary minerals in a shergottite, but their origin remains controversial. Gooding et al. argued that two types of carbonate occur with-in the glassy parts of the meteorite. One type, nearly pure CaCO3 associated with Ca-sulfate shows textural evidence for being present in the rock prior to it being shocked, suggesting formation on Mars. The second was more abundant and consists of Ca-rich carbonate, possibly with finely intergrown Mg-phosphate, but does not possess any textural relationships indicative of a martian origin. Carbon and oxygen isotopic studies of this carbonate yielded oxygen isotopes that potentially suggest a martian origin as well

Description: The Mars Curiosity rover has traversed nearly 20 km and gained over 350 meters in elevation since landing in Gale crater in August 2012. Through 2250 sols of surface operations, Curiosity has spent approximately 60% of its time investigating the Murray formation, a unit of layered sediments. The occurrence of sulfur compounds in the Murray formation has been established by imaging of light-toned veins by MastCam and MAHLI, chemical compositions measured by the Alpha Particle X-ray Spectrometer (APXS) and ChemCam, crystalline phase identifications by the CheMin X-ray diffractometer, and evolved gas analyses from the Sample Analysis at Mars (SAM) instrument.

Description: Over the past 50 years, great advances have been achieved in both analytical modal analysis (i.e. finite element models and analysis) and experimental modal analysis (i.e. modal testing) in aerospace and other fields. With the advent of more powerful computers, higher performance instrumentation and data acquisition systems, and powerful linear modal extraction tools, analysts and test engineers have a breadth and depth of technical resources only dreamed of by our predecessors. However, some observed recent trends indicate that hard lessons learned are being forgotten or ignored, and possibly fundamental concepts are not being understood. These trends have the potential of leading to the degradation of the quality of and confidence in both analytical and test results. These trends are a making of our own doing, and directly related to having ever more powerful computers, programmatic budgetary pressures to limit analysis and testing, and technical capital loss due to the retirement of the senior component of a bimodal workforce. This paper endeavors to highlight some of the most important lessons learned, common pitfalls to hopefully avoid, and potential steps that may be taken to help reverse this trend.

Description: The Photon Sieve (PS) team at NASA Langley Research Center (LaRC) began receiving support for the development and characterization of PS devices through the NASA Internal Research & Development Program (IRAD) in 2015. The project involves ascertaining the imaging characteristics of various PS devices. These devices hold the potential to significantly reduce mission costs and improve imaging quality by replacing traditional reflector telescopes. The photon sieve essentially acts as a lens to diffract light to a concentrated point on the focal plane like a Fresnel Zone Plate (FZP). PSs have the potential to focus light to a very small spot which is not limited by the width of the outermost zone as for the FZP and offers a promising solution for high resolution imaging. In the fields of astronomy, remote sensing, and other applications that require imaging of distant objects both on the ground and in the sky, it is often necessary to perform post-process filtering in order to separate noise signals that arise from multiple scattering events near the collection optic. The PS exhibits a novel filtering technique that rejects the unwanted noise without the need for time consuming post processing of the images. This project leverages key Langley resources to design, manufacture, and characterize a series of photon sieve specimens. After a prototype was developed and characterized in the Langley ISO5 optical cleanroom and laboratory, outside testing was conducted via the capture of images of the moon by using a telescopic setup. This next goal of the project is to design and develop a telescope and image capture system as a drone-based instrument payload. The vehicle utilized for the initial demonstration was a NASA hive model 1200 XE-8 research Unmanned Aerial Vehicle (UAV), capable of handling a 20-pound maximum payload with a 25-minute flight time. This NASA Technical Memorandum (NASA-TM) introduces preliminary results obtained using a PS-based imaging system on the UAV. The next version of the telescope structure will be designed around diffractive optical components and commercially available camera electronics to create a lightweight payload.

Description: Inflatable space structures have the potential to significantly reduce the required launch volume of large crewed pressure vessels for space exploration missions. Mass savings can also be achieved via the use of high specific strength softgoods materials, and the reduced design penalty from launching the structure in a densely packaged state. Inflatable softgoods structures have been investigated since the late 1950's, and several major development programs at NASA and in industry have helped advance the state-of-the-art in this technology area. This paper discusses the design, analysis, structural testing, and potential applications for inflatable softgoods structures. In particular, this paper will discuss the design of the multi-layer softgoods shell (inner layer, bladder, structural restraint layer, micrometeoroid orbital debris protection layers, thermal insulation layers, and atomic oxygen layer (for low earth orbit) and the results of material and module-level testing that has been conducted over the past two decades at NASA. Finally, the current utilization of expandable spacecraft structures is discussed, as well as potential future applications including airlocks and habitats on the Lunar Orbital Platform-Gateway, and the surface of the Moon and Mars.

Description: No abstract available

Description: Microsecond sparks and the resulting plume of hot gas/plasma were examined against a parametric pressure-distance matrix. Schlieren imaging is used to capture the spatial and temporal location of spark discharge exhaust for two milliseconds. Low pressure and larger gap widths created the largest size and intensity signal for the spark-affected plumes. Experimental exit-plume velocities trend well with analytic predictions using a mean pressure between the chamber and atmospheric conditions. Due to the quadratic relation of the annulus area and gap width, larger gap width velocities are more accurately represented by analytic predictions using atmospheric pressure as the larger exit area restricts the flow less. The same pressure adjustment, when applied to breakdown voltages, improves data alignment with Paschens Curve.

Description: This paper describes a new operational capability for fast attitude maneuvering that is being developed for the Lunar Reconnaissance Orbiter (LRO). The LRO hosts seven scientific instruments. For some instruments, it is necessary to per-form large off-nadir slews to collect scientific data. The accessibility of off-nadir science targets has been limited by slew rates and/or occultation, thermal and power constraints along the standard slew path. The new fast maneuver (FastMan) algorithm employs a slew path that autonomously avoids constraint violations while simultaneously minimizing the slew time. The FastMan algo-rithm will open regions of observation that were not previously feasible and improve the overall science return for LRO's extended mission. The design of an example fast maneuver for LRO's Lunar Orbiter Laser Altimeter that reduc-es the slew time by nearly 40% is presented. Pre-flight, ground-test, end-to-end tests are also presented to demonstrate the readiness of FastMan. This pioneer-ing work is extensible and has potential to improve the science data collection return of other NASA spacecraft, especially those observatories in extended mission phases where new applications are proposed to expand their utility.

Description: This package is for the conduct of a workshop during the International Space University Space Studies Program in the summer of 2019 being held in Strasbourg, France. It gives publicly available information on NASA and international plans to move beyond low Earth orbit to the Moon and discusses challenges and capabilities. This information will provide the participants a basic level of insight to develop a response on their perceived obstacles to a future vision of humans endeavors on the Moon.

Description: This PowerPoint presentation will discuss a new small spacecraft architecture which takes advantage of ESPA Class rideshare opportunities.

Description: We now know that water ice exists on the lunar surface thanks to the findings of multiple lunar missions such as LRO and LCROSS. However, before we develop systems that can utilize this precious resource at a useful scale, we need to acquire more data about the concentration of water in the lunar regolith and how it may vary by depth and location. The OVEN (Optimized Volatile Extraction Node) system is designed to determine the concentration of water as part of an instrument called WAVE (Water Analysis & Volatile Extraction) which can be deployed during a lunar resource prospecting mission. Experiments were carried out at the Johnson Space Center in order to better understand the potential losses of water that may occur during a prospecting mission when a sample is transferred from a drill to the OVEN. A description of the experiment as well as the results will be presented here.