ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Wiley-Blackwell  (95,760)
  • Oxford University Press  (40,171)
  • 2020-2023  (41)
  • 1985-1989  (75,971)
  • 1980-1984  (59,919)
Collection
Years
Year
  • 1
    Publication Date: 2022-03-02
    Description: Crystalline rocks can produce dangerous radiation levels on the basis of their content in radioisotopes. Here, we report radiological data from 10 metamorphic and igneous rock samples collected from the crystalline basement of the Peloritani Mountains (southern Italy). In order to evaluate the radiological properties of these rocks, the gamma radiation and the radon emanation have been measured. Moreover, since some of these rocks are employed as building materials, we assess the potential hazard for population connected to their use. Gamma spectroscopy was used to measure the 226Ra, 232Th and 40K activity concentration, whereas the radon emanation was investigated by using a RAD 7 detector. The results show 226Ra, 232Th and 40K activity concentration values ranging from (17 ± 4) to (56 ± 8) Bq kg-1, (14 ± 3) to (77 ± 14) Bq kg-1 and (167 ± 84) to (1760 ± 242) Bq kg-1, respectively. Values of the annual effective dose equivalent outdoor range from 0.035 to 0.152 mSv y-1, whereas the gamma index is in the range of 0.22-0.98. The 222Rn emanation coefficient and the 222Rn surface exhalation rate vary from (0.63 ± 0.3) to (8.27 ± 1.6)% and from (0.12 ± 0.03) to (2.75 ± 0.17) Bq m-2 h-1, respectively. The indoor radon derived from the building use of these rocks induces an approximate contribution to the annual effective dose ranging from 8 to 176 μSv y-1. All the obtained results suggest that the crystalline rocks from the Peloritani Mountains are not harmful for the residential population, even though they induce annual effective doses due to terrestrial gamma radiation above the worldwide average values. Moreover, their use as building materials does not produce significant health hazards connected to the indoor radon exposure.
    Description: Published
    Description: 452–464
    Description: 6A. Geochimica per l'ambiente e geologia medica
    Description: JCR Journal
    Repository Name: Istituto Nazionale di Geofisica e Vulcanologia (INGV)
    Type: article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 2
    Publication Date: 2022-03-07
    Description: The Pollino range is a region of slow deformation where earthquakes generally nucleate on low-angle normal faults. Recent studies have mapped fault structures and identified fluid related dynamics responsible for historical and recent seismicity in the area. Here, we apply the coda-normalization method at multiple frequencies and scales to image the 3-D P-wave attenuation (QP) properties of its slowly deforming fault network. The wide-scale average attenuation properties of the Pollino range are typical for a stable continental block, with a dependence of QP on frequency of Q−1 P = (0.0011   0.0008) f (0.36 0.32). Using only waveforms comprised in the area of seismic swarms, the dependence of attenuation on frequency increases [Q−1 P = (0.0373   0.0011) f (−0.59 0.01)], as expected when targeting seismically active faults. A shallow very-low-attenuation anomaly (max depth of 4–5 km) caps the seismicity recorded within the western cluster 1 of the Pollino seismic sequence (2012, maximum magnitude Mw = 5.1). High-attenuation volumes below this anomaly are likely related to fluid storage and comprise the western and northern portions of cluster 1 and the Mercure basin. These anomalies are constrained to the NW by a sharp low-attenuation interface, corresponding to the transition towards the eastern unit of the Apennine Platform under the Lauria mountains. The low-seismicity volume between cluster 1 and cluster 2 (maximum magnitude Mw = 4.3, east of the primary) shows diffuse low-to-average attenuation features. There is no clear indication of fluid-filled pathways between the two clusters resolvable at our resolution. In this volume, the attenuation values are anyway lower than in recognized low-attenuation blocks, like the Lauria Mountain and Pollino Range. As the volume develops in a region marked at surface by small-scale cross-faulting, it suggests no actual barrier between clusters, more likely a system of small locked fault patches that can break in the future. Our model loses resolution at depth, but it can still resolve a 5-to-15-km-deep high-attenuation anomaly that underlies the Castrovillari basin. This anomaly is an ideal deep source for the SE-to-NW migration of historical seismicity. Our novel deep structural maps support the hypothesis that the Pollino sequence has been caused by a mechanism of deep and lateral fluid-induced migration.
    Description: Natural Environment Research Council (NERC) Centre for Doctoral Training (CDT) in Oil and Gas. University of Aberdeen.
    Description: Published
    Description: 536–547
    Description: 4T. Sismicità dell'Italia
    Description: JCR Journal
    Keywords: body waves ; seismic attenuation ; seismic tomography ; 04.06. Seismology
    Repository Name: Istituto Nazionale di Geofisica e Vulcanologia (INGV)
    Type: article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 3
    Publication Date: 2022-05-25
    Description: © The Author(s), 2020. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Carroll, E. L., Ott, P. H., McMillan, L. F., Galletti Vernazzani, B., Neveceralova, P., Vermeulen, E., Gaggiotti, O. E., Andriolo, A., Baker, C. S., Bamford, C., Best, P., Cabrera, E., Calderan, S., Chirife, A., Fewster, R. M., Flores, P. A. C., Frasier, T., Freitas, T. R. O., Groch, K., Hulva, P., Kennedy, A., Leaper, R., Leslie, M. S., Moore, M., Oliveira, L., Seger, J., Stepien, E. N., Valenzuela, L. O., Zerbini, A., & Jackson, J. A. Genetic diversity and connectivity of southern right whales (Eubalaena australis) found in the Brazil and Chile-Peru wintering grounds and the South Georgia (Islas Georgias del Sur) feeding ground. Journal of Heredity, 111(3), (2020): 263-276, doi:10.1093/jhered/esaa010.
    Description: As species recover from exploitation, continued assessments of connectivity and population structure are warranted to provide information for conservation and management. This is particularly true in species with high dispersal capacity, such as migratory whales, where patterns of connectivity could change rapidly. Here we build on a previous long-term, large-scale collaboration on southern right whales (Eubalaena australis) to combine new (nnew) and published (npub) mitochondrial (mtDNA) and microsatellite genetic data from all major wintering grounds and, uniquely, the South Georgia (Islas Georgias del Sur: SG) feeding grounds. Specifically, we include data from Argentina (npub mtDNA/microsatellite = 208/46), Brazil (nnew mtDNA/microsatellite = 50/50), South Africa (nnew mtDNA/microsatellite = 66/77, npub mtDNA/microsatellite = 350/47), Chile–Peru (nnew mtDNA/microsatellite = 1/1), the Indo-Pacific (npub mtDNA/microsatellite = 769/126), and SG (npub mtDNA/microsatellite = 8/0, nnew mtDNA/microsatellite = 3/11) to investigate the position of previously unstudied habitats in the migratory network: Brazil, SG, and Chile–Peru. These new genetic data show connectivity between Brazil and Argentina, exemplified by weak genetic differentiation and the movement of 1 genetically identified individual between the South American grounds. The single sample from Chile–Peru had an mtDNA haplotype previously only observed in the Indo-Pacific and had a nuclear genotype that appeared admixed between the Indo-Pacific and South Atlantic, based on genetic clustering and assignment algorithms. The SG samples were clearly South Atlantic and were more similar to the South American than the South African wintering grounds. This study highlights how international collaborations are critical to provide context for emerging or recovering regions, like the SG feeding ground, as well as those that remain critically endangered, such as Chile–Peru.
    Description: This work was supported by the EU BEST 2.0 medium grant 1594 and UK DARWIN PLUS grant 057 and additional funding from the World Wildlife Fund GB107301. The collection of the Chile–Peru sample was supported by the Global Greengrants Fund and the Pacific Whale Foundation. The collection of the Brazilian samples was supported through grants by the Brazilian National Research Council to Paulo H. Ott (CNPq proc. n° 144064/98-7) and Paulo A.C. Flores (CNPq proc. n° 146609/1999-9) and with support from the World Wildlife Fund (WWF-Brazil). The collection of the South African samples was supported by the Global Greengrants Fund, the Pacific Whale Foundation and Charles University Grant Agency (1140217). E.L.C. was partially supported by a Rutherford Discovery Fellowship from the Royal Society of New Zealand. This study forms part of the Ecosystems component of the British Antarctic Survey Polar Sciences for Planet Earth Programme, funded by the Natural Environment Research Council.
    Keywords: population structure ; connectivity ; migration ; gene flow
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 4
    Publication Date: 2022-03-16
    Description: This article has been accepted for publication in Geophysical Journal International ©: The Authors 2021. Published by Oxford University Press on behalf of the Royal Astronomical Society. All rights reserved. Uploaded in accordance with the publisher's self-archiving policy.
    Description: In a recent study (Jozinovi\'c et al, 2020) we showed that convolutional neural networks (CNNs) applied to network seismic traces can be used for rapid prediction of earthquake peak ground motion intensity measures (IMs) at distant stations using only recordings from stations near the epicenter. The predictions are made without any previous knowledge concerning the earthquake location and magnitude. This approach differs from the standard procedure adopted by earthquake early warning systems (EEWSs) that rely on location and magnitude information. In the previous study, we used 10 s, raw, multistation waveforms for the 2016 earthquake sequence in central Italy for 915 events (CI dataset). The CI dataset has a large number of spatially concentrated earthquakes and a dense station network. In this work, we applied the CNN model to an area around the VIRGO gravitational waves observatory sited near Pisa, Italy. In our initial application of the technique, we used a dataset consisting of 266 earthquakes recorded by 39 stations. We found that the CNN model trained using this smaller dataset performed worse compared to the results presented in the original study by Jozinovi\'c et al. (2020). To counter the lack of data, we adopted transfer learning (TL) using two approaches: first, by using a pre-trained model built on the CI dataset and, next, by using a pre-trained model built on a different (seismological) problem that has a larger dataset available for training. We show that the use of TL improves the results in terms of outliers, bias, and variability of the residuals between predicted and true IMs values. We also demonstrate that adding knowledge of station positions as an additional layer in the neural network improves the results. The possible use for EEW is demonstrated by the times for the warnings that would be received at the station PII.
    Description: RISE (Union's Horizon 2020 research and innovation programme, grant agreement No.821115)
    Description: Published
    Description: 704–718
    Description: 5T. Sismologia, geofisica e geologia per l'ingegneria sismica
    Description: JCR Journal
    Keywords: Physics - Geophysics; Physics - Geophysics ; machine learning ; ground motion prediction ; seismology
    Repository Name: Istituto Nazionale di Geofisica e Vulcanologia (INGV)
    Type: article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 5
    Publication Date: 2021-12-24
    Description: This article has been accepted for publication in Geophysical Journal International ©: The Authors 2021. Published by Oxford University Press on behalf of the Royal Astronomical Society. All rights reserved. Uploaded in accordance with the publisher's self-archiving policy.
    Description: Ambient-noise records from the AlpArray network are used to measure Rayleigh wave phase velocities between more than 150,000 station pairs. From these, azimuthally anisotropic phase-velocity maps are obtained by applying the Eikonal tomography method. Several synthetic tests are shown to study the bias in the Ψ2 anisotropy. There are two main groups of bias, the first one caused by interference between refracted/reflected waves and the appearance of secondary wavefronts that affect the phase travel-time measurements. This bias can be reduced if the amplitude field can be estimated correctly. Another source of error is related to the incomplete reconstruction of the travel-time field that is only sparsely sampled due to the receiver locations. Both types of bias scale with the magnitude of the velocity heterogeneities. Most affected by the spurious Ψ2 anisotropy are areas inside and at the border of low-velocity zones. In the isotropic velocity distribution, most of the bias cancels out if the azimuthal coverage is good. Despite the lack of resolution in many parts of the surveyed area, we identify a number of anisotropic structures that are robust: in the central Alps, we find a layered anisotropic structure, arc-parallel at midcrustal depths and arc-perpendicular in the lower crust. In contrast, in the eastern Alps, the pattern is more consistently E-W oriented which we relate to the eastward extrusion. The northern Alpine forleand exhibits a preferential anisotropic orientation that is similar to SKS observations in the lowermost crust and uppermost mantle.
    Description: German Science Foundation (SPP-2017, Project Ha 2403/21-1); Swiss National Science Foundation SINERGIA Project CRSII2-154434/1 (Swiss-AlpArray); Progetto Pianeta Dinamico, finanziamento MUR-INGV, Task S2 – 2021
    Description: Published
    Description: 151–170
    Description: 1T. Struttura della Terra
    Description: JCR Journal
    Keywords: Seismic anisotropy ; Seismic interferometry ; Seismic tomography ; Wave propagation ; Continental tectonics: compressional ; 04.01. Earth Interior ; 04.06. Seismology
    Repository Name: Istituto Nazionale di Geofisica e Vulcanologia (INGV)
    Type: article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 6
    Publication Date: 2021-12-15
    Description: This article has been accepted for publication in Geophysical Journal International ©: The Authors 2022. Published by Oxford University Press on behalf of the Royal Astronomical Society. All rights reserved. Uploaded in accordance with the publisher's self-archiving policy.
    Description: To understand the seismotectonics and the seismic hazard of the study sector of the Northern Apennines (Italy), one of the most important earthquakes of magnitude Mw = 6.5 which struck the Lunigiana and Garfagnana areas (Tuscany) on 7 September 1920 should be studied. Given the early instrumental epoch of the event, neither geometric and kinematic information on the fault-source nor its fault-plane solution were available. Both areas were candidates for hosting the source fault and there was uncertainty between a normal fault with Apenninic direction or an anti-Apenninic strike-slip. We retrieved 11 focal parameters (including the fault-plane solution) of the 1920 earthquake. Only macroseismic intensity information (from 499 inhabited centres) through the KF-NGA inversion technique was used. This technique uses a Kinematic model of the earthquake source and speeds up the calculation by a Genetic Algorithm with Niching. The result is a pure dip-slip focal solution. The intrinsic ambiguities of the KF-NGA method (±180° on the rake angle; choice of the fault plane between the two nodal planes) were solved with field and seismotectonic evidence. The earthquake was generated by a normal fault (rake angle = 265° ± 8°) with an Apennine direction (114° ± 5°) and dipping 38° ± 6° towards SW. The likely candidate for hosting the source-fault in 1920 is the Compione-Comano fault that borders the NE edge of the Lunigiana graben. The KF-NGA algorithm proved to be invaluable for studying the kinematics of early instrumental earthquakes and allowed us to uniquely individuate, for the first time ever, the seismogenic source of the 1920 earthquake. Our findings have implications in hazard computation and seismotectonic contexts.
    Description: Published
    Description: 1465–1477
    Description: 4T. Sismicità dell'Italia
    Description: JCR Journal
    Keywords: Inverse theory ; Body waves ; Earthquake source observations ; Seismicity and tectonics ; Dynamics: seismotectonics ; Fractures, faults, and high strain deformation zones ; 04.06. Seismology
    Repository Name: Istituto Nazionale di Geofisica e Vulcanologia (INGV)
    Type: article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 7
    Publication Date: 2021-12-22
    Description: Systematic variations in the crystal cargo and whole-rock isotopic compositions of mantle-derived basalts in the intraplate Dunedin Volcano (New Zealand) indicate the influence of a complex mantle-to-crust polybaric plumbing system. Basaltic rocks define a compositional spectrum from low-alkali basalts through mid-alkali basalts to high-alkali basalts. High-alkali basalts display clinopyroxene crystals with sector (hourglass) and oscillatory zoning (Mg#61–82) as well as Fe-rich green cores (Mg#43–69), whereas low-alkali basalts are characterized by clinopyroxenes with unzoned overgrowths (Mg#69–83) on resorbed mafic cores (Mg#78–88), coexisting with reversely zoned plagioclase crystals (An43–68 to An60–84 from core to rim). Complex magma dynamics are indicated by distinctive compositional variations in clinopyroxene phenocrysts, with Cr-rich zones (Mg#74–87) indicating continuous recharge by more mafic magmas. Crystallization of olivine, clinopyroxene and titanomagnetite occurred within a polybaric plumbing system extending from upper mantle to mid-crustal depths (485–1059 MPa and 1147–1286°C), whereas crystallization of plagioclase with subordinate clinopyroxene and titanomagnetite proceeded towards shallower crustal levels. The compositions of high-alkali basalts and mid-alkali basalts resemble those of ocean island basalts and are characterized by FOZO-HIMU isotopic signatures (87Sr/86Sri = 0.70277–0.70315, 143Nd/144Ndi = 0.51286–0.51294 and 206Pb/204Pb = 19.348–20.265), whereas low-alkali basalts have lower incompatible element abundances and isotopic compositions trending towards EMII (87Sr/86Sri = 0.70327–70397, 143Nd/144Ndi = 0.51282–0.51286 and 206Pb/204Pb = 19.278–19.793). High- and mid-alkali basalt magmas mostly crystallized in the lower crust, whereas low-alkali basalt magma recorded deeper upper mantle clinopyroxene crystallization before eruption. The variable alkaline character and isotope composition may result from interaction of low-alkaline melts derived from the asthenosphere with melts derived from lithospheric mantle, possibly initiated by asthenospheric melt percolation. The transition to more alkaline compositions was induced by variable degrees of melting of metasomatic lithologies in the lithospheric mantle, leading to eruption of predominantly small-volume, high-alkali magmas at the periphery of the volcano. Moreover, the lithosphere imposed a filtering effect on the alkalinity of these intraplate magmas. As a consequence, the eruption of low-alkali basalts with greater asthenospheric input was concentrated at the centre of the volcano, where the plumbing system was more developed.
    Description: Published
    Description: egab062
    Description: 2V. Struttura e sistema di alimentazione dei vulcani
    Description: 3V. Proprietà chimico-fisiche dei magmi e dei prodotti vulcanici
    Description: 4V. Processi pre-eruttivi
    Description: JCR Journal
    Keywords: alkali basalts ; Dunedin Volcano ; thermobarometry ; primary magma ; lithospheric mantle filter ; Igneous Petrology ; Thermobarometry ; Mantle melting and metasomatism ; Magmatic plumbing systems
    Repository Name: Istituto Nazionale di Geofisica e Vulcanologia (INGV)
    Type: article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 8
    Publication Date: 2022-06-24
    Description: © The Author(s), 2022. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Page, H. N., Bahr, K. D., Cyronak, T., Jewett, E. B., Johnson, M. D., & McCoy, S. J. Responses of benthic calcifying algae to ocean acidification differ between laboratory and field settings. Ices Journal of Marine Science, 79(1), (2022): 1–11, https://doi.org/10.1093/icesjms/fsab232.
    Description: Accurately predicting the effects of ocean and coastal acidification on marine ecosystems requires understanding how responses scale from laboratory experiments to the natural world. Using benthic calcifying macroalgae as a model system, we performed a semi-quantitative synthesis to compare directional responses between laboratory experiments and field studies. Variability in ecological, spatial, and temporal scales across studies, and the disparity in the number of responses documented in laboratory and field settings, make direct comparisons difficult. Despite these differences, some responses, including community-level measurements, were consistent across laboratory and field studies. However, there were also mismatches in the directionality of many responses with more negative acidification impacts reported in laboratory experiments. Recommendations to improve our ability to scale responses include: (i) developing novel approaches to allow measurements of the same responses in laboratory and field settings, and (ii) researching understudied calcifying benthic macroalgal species and responses. Incorporating these guidelines into research programs will yield data more suitable for robust meta-analyses and will facilitate the development of ecosystem models that incorporate proper scaling of organismal responses to in situ acidification. This, in turn, will allow for more accurate predictions of future changes in ecosystem health and function in a rapidly changing natural climate.
    Description: We would like to thank the Ocean Carbon and Biogeochemistry Program for organizing the fourth U.S. Ocean Acidification Principal Investigators meeting, which is where this synthesis was conceived. HNP was a postdoctoral research fellow at Mote Marine Laboratory. MDJ is a postdoctoral scholar at Woods Hole Oceanographic Institution. SJM is a Norma J. Lang early career fellow of the Phycological Society of America.
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 9
    Publication Date: 2022-06-22
    Description: In this paper we simulate the earthquake that hit the city of L'Aquila on the 6th of April 2009 using SPEED (SPectral Elements in Elastodynamics with Discontinuous Galerkin), an open-source code able to simulate the propagation of seismic waves in complex three-dimensional (3D) domains. Our model includes an accurate 3D recon- struction of the Quaternary deposits, according to the most up-to-date data obtained from the Microzonation studies in Central Italy and a detailed model of the topography incorporated using a newly developed tool (May et al. 2021). The sensitivity of our results with respect to dfferent kinematic seismic sources is inves- tigated. The results obtained are in good agreement with the recordings at the available seismic stations at epicentral distances within a range of 20km. Finally, a blind source prediction scenario application shows a reasonably good agreement between simulations and recordings can be obtained by simulating stochastic rupture realizations with basic input data. These results, although limited to nine simulated scenarios, demonstrate that it is possible to obtain a satisfactory reconstruction of a ground shaking scenario employing a stochastic source constrained on a limited amount of ex-ante information. A similar approach can be used to model future and past earthquakes for which little or no information is typically available, with potential relevant implications for seismic risk assessment.
    Description: Published
    Description: 29–49
    Description: 3T. Fisica dei terremoti e Sorgente Sismica
    Description: JCR Journal
    Repository Name: Istituto Nazionale di Geofisica e Vulcanologia (INGV)
    Type: article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 10
    Publication Date: 2022-06-22
    Description: This article has been accepted for publication in Geophysical Journal International ©: The Authors 2022. Published by Oxford University Press on behalf of the Royal Astronomical Society. All rights reserved. Uploaded in accordance with the publisher's self-archiving policy.
    Description: On 29 December 2020, a shallow earthquake of magnitude Mw 6.4 struck northern Croatia, near the town of Petrinja, more than 24 hours after a strong foreshock (Ml 5). We formed a reconnaissance team of European geologists and engineers, from Croatia, Slovenia, France, Italy and Greece, rapidly deployed in the field to map the evidence of coseismic environmental effects. In the epicentral area, we recognized surface deformation, such as tectonic breaks along the earthquake source at the surface, liquefaction features (scattered in the fluvial plains of Kupa, Glina and Sava rivers), and slope failures, both caused by strong motion. Thanks to this concerted, collective and meticulous work, we were able to document and map a clear and unambiguous coseismic surface rupture associated with the main shock. The surface rupture appears discontinuous, consisting of multi-kilometer en échelon right stepping sections, along a NW-SE striking fault that we call the Petrinja-Pokupsko Fault (PPKF). The observed deformation features, in terms of kinematics and trace alignments, are consistent with slip on a right lateral fault, in agreement with the focal solution of the main shock. We found mole tracks, displacement on faults affecting natural features (e. g. drainage channels), scarplets, and more frequently breaks of anthropogenic markers (roads, fences). The surface rupture is observed over a length of ∼13 km from end-to-end, with a maximum displacement of 38 cm, and an average displacement of ∼10 cm. Moreover, the liquefaction extends over an area of nearly 600 km² around the epicenter. Typology of liquefaction features include sand blows, lateral spreading phenomenon along the road and river embankments, as well as sand ejecta of different grain size and matrix. Development of large and long fissures along the fluvial landforms, current or ancient, with massive ejections of sediments is pervasive. These features are sometimes accompanied by small horizontal displacements. Finally, the environmental effects of the earthquake appear to be reasonably consistent with the usual scaling relationships, in particular the surface faulting. This rupture of the ground occurred on or near traces of a fault that shows clear evidence of Quaternary activity. Further and detailed studies will be carried out to characterize this source and related faults in terms of future large earthquakes potential, for their integration into seismic hazard models.
    Description: Published
    Description: 1394–1418
    Description: 2T. Deformazione crostale attiva
    Description: JCR Journal
    Keywords: Seismicity and tectonics ; Earthquake hazards ; Coseismic effects ; M6.4 Petrinja earthquake (Croatia)
    Repository Name: Istituto Nazionale di Geofisica e Vulcanologia (INGV)
    Type: article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 11
    Publication Date: 2022-09-01
    Description: In the last years the scientific literature has been enriched with new models of the Moho depth in the Antarctica Continent derived by the seismic reflection technique and refraction profiles, receiver functions and seismic surface waves, but also by gravimetric observations over the continent. In particular, the gravity satellite missions of the last two decades have provided data in this remote region of the Earth and have allowed the investigation of the crust properties. Meanwhile, other important contributions in this direction has been given by the fourth International Polar Year (IPY, 2007–2008) which started seismographic and geodetic networks of unprecedented duration and scale, including airborne gravimetry over largely unexplored Antarctic frontiers. In this study, a new model for the Antarctica Moho depths is proposed. This new estimation is based on no satellite gravity measures, thanks to the availability of the gravity database ANTGG2015, that collects gravity data from ground-base, airborne and shipborne campaigns. In this new estimate of the Moho depths the contribution of the gravity measures has been maximized reducing any correction of the gravity measures and avoiding constraints of the solution to seismological observations and to geological evidence. With this approach a pure gravimetric solution has been determined. The model obtained is pretty in agreement with other Moho models and thanks to the use of independent data it can be exploited also for cross-validating different Moho depths solutions.
    Description: Published
    Description: 1404–1420
    Description: 1T. Struttura della Terra
    Description: JCR Journal
    Keywords: Antarctica ; Moho ; Gravity inversion ; Collocation ; ANTGG2015
    Repository Name: Istituto Nazionale di Geofisica e Vulcanologia (INGV)
    Type: article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 12
    facet.materialart.
    Unknown
    Oxford University Press
    In:  EPIC3Geophysical Journal International, Oxford University Press, 231, pp. 1959-1981
    Publication Date: 2022-09-16
    Description: Seismic reflection and refraction data were collected in 2007 and 2012 to reveal the crustal fabric on a single long composite profile offshore Prydz Bay, East Antarctica. A P-wave velocity model provides insights on the crustal fabric, and a gravity-constrained density model is used to describe the crustal and mantle structure. The models show that a 230-km- wide continent–ocean transition separates stretched continental from oceanic crust along our profile. While the oceanic crust close to the continent–ocean boundary is just 3.5–5 km thick, its thickness increases northwards towards the Southern Kerguelen Plateau to 12 km. This change is accompanied by thickening of a lower crustal layer with high P-wave velocities of up to 7.5 km s–1, marking intrusive rocks emplaced beneath the mid-ocean ridge under increasing influence of the Kerguelen plume. Joint interpretations of our crustal model, seismic reflection data and magnetic data sets constrain the age and extent of oceanic crust in the research area. Oceanic crust is shown to continue to around 160 km farther south than has been interpreted in previous data, with profound implications for plate kinematic models of the region. Finally, by combining our findings with a regional magnetic data compilation and regional seismic reflection data we propose a larger extent of oceanic crust in the Enderby Basin than previously known.
    Repository Name: EPIC Alfred Wegener Institut
    Type: Article , isiRev
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 13
    Publication Date: 2022-05-26
    Description: © The Author(s), 2019. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Lasek-Nesselquist, E., & Johnson, M. D. A phylogenomic approach to clarifying the relationship of Mesodinium within the Ciliophora: a case study in the complexity of mixed-species transcriptome analyses. Genome Biology and Evolution, 11(11), (2019): 3218–3232, doi:10.1093/gbe/evz233.
    Description: Recent high-throughput sequencing endeavors have yielded multigene/protein phylogenies that confidently resolve several inter- and intra-class relationships within the phylum Ciliophora. We leverage the massive sequencing efforts from the Marine Microbial Eukaryote Transcriptome Sequencing Project, other SRA submissions, and available genome data with our own sequencing efforts to determine the phylogenetic position of Mesodinium and to generate the most taxonomically rich phylogenomic ciliate tree to date. Regardless of the data mining strategy, the multiprotein data set, or the molecular models of evolution employed, we consistently recovered the same well-supported relationships among ciliate classes, confirming many of the higher-level relationships previously identified. Mesodinium always formed a monophyletic group with members of the Litostomatea, with mixotrophic species of Mesodinium—M. rubrum, M. major, and M. chamaeleon—being more closely related to each other than to the heterotrophic member, M. pulex. The well-supported position of Mesodinium as sister to other litostomes contrasts with previous molecular analyses including those from phylogenomic studies that exploited the same transcriptomic databases. These topological discrepancies illustrate the need for caution when mining mixed-species transcriptomes and indicate that identifying ciliate sequences among prey contamination—particularly for Mesodinium species where expression from stolen prey nuclei appears to dominate—requires thorough and iterative vetting with phylogenies that incorporate sequences from a large outgroup of prey.
    Description: We thank David Beaudoin and Holly V. Moeller for their assistance in collecting cells and extracting RNA. We thank the Josephine Bay Paul Center for Comparative Molecular Biology and Evolution at the Marine Biological Laboratory for the generous use of their servers. This work was supported in part by a National Science Foundation grant to both authors (IOS 1354773).
    Keywords: Mesodinium ; Litostomatea ; ciliate phylogenomics ; mixed-species transcriptomes ; sequence contamination
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 14
    Publication Date: 2022-05-26
    Description: © The Author(s), 2019. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Xu, X., Li, G., Li, C., Zhang, J., Wang, Q., Simmons, D. K., Chen, X., Wijesena, N., Zhu, W., Wang, Z., Wang, Z., Ju, B., Ci, W., Lu, X., Yu, D., Wang, Q., Aluru, N., Oliveri, P., Zhang, Y. E., Martindale, M. Q., & Liu, J. Evolutionary transition between invertebrates and vertebrates via methylation reprogramming in embryogenesis. National Science Review, 6(5), (2019):993-1003, doi:10.1093/nsr/nwz064.
    Description: Major evolutionary transitions are enigmas, and the most notable enigma is between invertebrates and vertebrates, with numerous spectacular innovations. To search for the molecular connections involved, we asked whether global epigenetic changes may offer a clue by surveying the inheritance and reprogramming of parental DNA methylation across metazoans. We focused on gametes and early embryos, where the methylomes are known to evolve divergently between fish and mammals. Here, we find that methylome reprogramming during embryogenesis occurs neither in pre-bilaterians such as cnidarians nor in protostomes such as insects, but clearly presents in deuterostomes such as echinoderms and invertebrate chordates, and then becomes more evident in vertebrates. Functional association analysis suggests that DNA methylation reprogramming is associated with development, reproduction and adaptive immunity for vertebrates, but not for invertebrates. Interestingly, the single HOX cluster of invertebrates maintains unmethylated status in all stages examined. In contrast, the multiple HOX clusters show dramatic dynamics of DNA methylation during vertebrate embryogenesis. Notably, the methylation dynamics of HOX clusters are associated with their spatiotemporal expression in mammals. Our study reveals that DNA methylation reprogramming has evolved dramatically during animal evolution, especially after the evolutionary transitions from invertebrates to vertebrates, and then to mammals.
    Description: This work was supported by the National Key Research and Development Program of China (2018YFC1003303), the Strategic Priority Research Program of the CAS (XDB13040200), the National Natural Science Foundation of China (91519306, 31425015), the Youth Innovation Promotion Association of the CAS and the Key Research Program of Frontier Sciences, CAS (QYZDY-SSW-SMC016).
    Keywords: DNA methylation ; evolution ; development ; reprogramming
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 15
    Publication Date: 2022-05-26
    Description: © The Author(s), 2020. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Vallecillo-Viejo, I. C., Liscovitch-Brauer, N., Diaz Quiroz, J. F., Montiel-Gonzalez, Maria F., Nemes, Sonya E., Rangan, K. J., Levinson, S. R., Eisenberg, E., & Rosenthal, J. J. C. Spatially regulated editing of genetic information within a neuron. Nucleic Acids Research, (2020): gkaa172, doi: 10.1093/nar/gkaa172.
    Description: In eukaryotic cells, with the exception of the specialized genomes of mitochondria and plastids, all genetic information is sequestered within the nucleus. This arrangement imposes constraints on how the information can be tailored for different cellular regions, particularly in cells with complex morphologies like neurons. Although messenger RNAs (mRNAs), and the proteins that they encode, can be differentially sorted between cellular regions, the information itself does not change. RNA editing by adenosine deamination can alter the genome’s blueprint by recoding mRNAs; however, this process too is thought to be restricted to the nucleus. In this work, we show that ADAR2 (adenosine deaminase that acts on RNA), an RNA editing enzyme, is expressed outside of the nucleus in squid neurons. Furthermore, purified axoplasm exhibits adenosine-to-inosine activity and can specifically edit adenosines in a known substrate. Finally, a transcriptome-wide analysis of RNA editing reveals that tens of thousands of editing sites (〉70% of all sites) are edited more extensively in the squid giant axon than in its cell bodies. These results indicate that within a neuron RNA editing can recode genetic information in a region-specific manner.
    Description: National Science Foundation (NSF) [IOS1557748 to J.R.]; United States–Israel Binational Science Foundation [BSF2013094 to J.R. and E.E.]; The Grass Foundation grant in support of the Doryteuthis pealeii Genome Project, and a gift by Mr. Edward Owens. Funding for open access charge: United States–Israel Binational Science Foundation [BSF2013094].
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 16
    Publication Date: 2022-10-27
    Description: © The Author(s), 2020. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in da Fonseca, R. R., Couto, A., Machado, A. M., Brejova, B., Albertin, C. B., Silva, F., Gardner, P., Baril, T., Hayward, A., Campos, A., Ribeiro, A. M., Barrio-Hernandez, I., Hoving, H. J., Tafur-Jimenez, R., Chu, C., Frazao, B., Petersen, B., Penaloza, F., Musacchia, F., Alexander, G. C., Osorio, H., Winkelmann, I., Simakov, O., Rasmussen, S., Rahman, M. Z., Pisani, D., Vinther, J., Jarvis, E., Zhang, G., Strugnell, J. M., Castro, L. F. C., Fedrigo, O., Patricio, M., Li, Q., Rocha, S., Antunes, A., Wu, Y., Ma, B., Sanges, R., Vinar, T., Blagoev, B., Sicheritz-Ponten, T., Nielsen, R., & Gilbert, M. T. P. A draft genome sequence of the elusive giant squid, Architeuthis dux. Gigascience, 9(1), (2020): giz152. doi: 10.1093/gigascience/giz152.
    Description: Background: The giant squid (Architeuthis dux; Steenstrup, 1857) is an enigmatic giant mollusc with a circumglobal distribution in the deep ocean, except in the high Arctic and Antarctic waters. The elusiveness of the species makes it difficult to study. Thus, having a genome assembled for this deep-sea–dwelling species will allow several pending evolutionary questions to be unlocked. Findings: We present a draft genome assembly that includes 200 Gb of Illumina reads, 4 Gb of Moleculo synthetic long reads, and 108 Gb of Chicago libraries, with a final size matching the estimated genome size of 2.7 Gb, and a scaffold N50 of 4.8 Mb. We also present an alternative assembly including 27 Gb raw reads generated using the Pacific Biosciences platform. In addition, we sequenced the proteome of the same individual and RNA from 3 different tissue types from 3 other species of squid (Onychoteuthis banksii, Dosidicus gigas, and Sthenoteuthis oualaniensis) to assist genome annotation. We annotated 33,406 protein-coding genes supported by evidence, and the genome completeness estimated by BUSCO reached 92%. Repetitive regions cover 49.17% of the genome. Conclusions: This annotated draft genome of A. dux provides a critical resource to investigate the unique traits of this species, including its gigantism and key adaptations to deep-sea environments.
    Description: R.R.F. thanks the Villum Fonden for grant VKR023446 (Villum Fonden Young Investigator Grant), the Portuguese Science Foundation (FCT) for grant PTDC/MAR/115347/2009; COMPETE-FCOMP-01-012; FEDER-015453, Marie Curie Actions (FP7-PEOPLE-2010-IEF, Proposal 272927), and the Danish National Research Foundation (DNRF96) for its funding of the Center for Macroecology, Evolution, and Climate. H.O. thanks the Rede Nacional de Espectrometria de Massa, ROTEIRO/0028/2013, ref. LISBOA-01-0145-FEDER-022125, supported by COMPETE and North Portugal Regional Operational Programme (Norte2020), under the PORTUGAL 2020 Partnership Agreement, through the European Regional Development Fund (ERDF). A.C. thanks FCT for project UID/Multi/04423/2019. M.P. acknowledges the support from the Wellcome Trust (grant number WT108749/Z/15/Z) and the European Molecular Biology Laboratory. M.P.T.G. thanks the Danish National Research Foundation for its funding of the Center for GeoGenetics (grant DNRF94) and Lundbeck Foundation for grant R52–5062 on Pathogen Palaeogenomics. S.R. was supported by the Novo Nordisk Foundation grant NNF14CC0001. A.H. is supported by a Biotechnology and Biological Sciences Research Council David Phillips Fellowship (fellowship reference: BB/N020146/1). T.B. is supported by the Biotechnology and Biological Sciences Research Council-funded South West Biosciences Doctoral Training Partnership (training grant reference BB/M009122/1). This work was partially funded by the Lundbeck Foundation (R52-A4895 to B.B.). H.J.T.H. was supported by the David and Lucile Packard Foundation, the Netherlands Organization for Scientific Research (#825.09.016), and currently by the Deutsche Forschungsgemeinschaft (DFG) under grant HO 5569/2-1 (Emmy Noether Junior Research Group). T.V. and B. Brejova were supported by grants from the Slovak grant agency VEGA (1/0684/16, 1/0458/18). F.S. was supported by a PhD grant (SFRH/BD/126560/2016) from FCT. A.A. was partly supported by the FCT project PTDC/CTA-AMB/31774/2017. C.C. and Y.W. are partly supported by grant IIS-1526415 from the US National Science Foundation. Computation for the work described in this article was partially supported by the DeiC National Life Science Supercomputer at DTU.
    Keywords: Cephalopod ; Invertebrate ; Genome assembly
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 17
    Publication Date: 2022-10-27
    Description: © The Author(s), 2021. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Tassia, M. G., David, K. T., Townsend, J. P., & Halanych, K. M. TIAMMAt: leveraging biodiversity to revise protein domain models, evidence from innate immunity. Molecular Biology and Evolution, 38(12), (2021): 5806–5818, https://doi.org/10.1093/molbev/msab258.
    Description: Sequence annotation is fundamental for studying the evolution of protein families, particularly when working with nonmodel species. Given the rapid, ever-increasing number of species receiving high-quality genome sequencing, accurate domain modeling that is representative of species diversity is crucial for understanding protein family sequence evolution and their inferred function(s). Here, we describe a bioinformatic tool called Taxon-Informed Adjustment of Markov Model Attributes (TIAMMAt) which revises domain profile hidden Markov models (HMMs) by incorporating homologous domain sequences from underrepresented and nonmodel species. Using innate immunity pathways as a case study, we show that revising profile HMM parameters to directly account for variation in homologs among underrepresented species provides valuable insight into the evolution of protein families. Following adjustment by TIAMMAt, domain profile HMMs exhibit changes in their per-site amino acid state emission probabilities and insertion/deletion probabilities while maintaining the overall structure of the consensus sequence. Our results show that domain revision can heavily impact evolutionary interpretations for some families (i.e., NLR’s NACHT domain), whereas impact on other domains (e.g., rel homology domain and interferon regulatory factor domains) is minimal due to high levels of sequence conservation across the sampled phylogenetic depth (i.e., Metazoa). Importantly, TIAMMAt revises target domain models to reflect homologous sequence variation using the taxonomic distribution under consideration by the user. TIAMMAt’s flexibility to revise any subset of the Pfam database using a user-defined taxonomic pool will make it a valuable tool for future protein evolution studies, particularly when incorporating (or focusing) on nonmodel species.
    Description: This work was supported by The National Science Foundation (Grant No. IOS—1755377 to K.M.H., Rita Graze, and Elizabeth Hiltbold Schwartz), and K.T.D. was supported by The National Science Foundation’s Graduate Research Fellowship Program.
    Keywords: Protein evolution ; Domain annotation ; Animal evolution ; Innate immunity
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 18
    Publication Date: 2022-10-27
    Description: © The Author(s), 2021. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Shoshan, Y., Liscovitch-Brauer, N., Rosenthal, J. J. C., & Eisenberg, E. Adaptive proteome diversification by nonsynonymous A-to-I RNA editing in coleoid cephalopods. Molecular Biology and Evolution, 38(9), (2021): 3775–3788, https://doi.org/10.1093/molbev/msab154.
    Description: RNA editing by the ADAR enzymes converts selected adenosines into inosines, biological mimics for guanosines. By doing so, it alters protein-coding sequences, resulting in novel protein products that diversify the proteome beyond its genomic blueprint. Recoding is exceptionally abundant in the neural tissues of coleoid cephalopods (octopuses, squids, and cuttlefishes), with an over-representation of nonsynonymous edits suggesting positive selection. However, the extent to which proteome diversification by recoding provides an adaptive advantage is not known. It was recently suggested that the role of evolutionarily conserved edits is to compensate for harmful genomic substitutions, and that there is no added value in having an editable codon as compared with a restoration of the preferred genomic allele. Here, we show that this hypothesis fails to explain the evolutionary dynamics of recoding sites in coleoids. Instead, our results indicate that a large fraction of the shared, strongly recoded, sites in coleoids have been selected for proteome diversification, meaning that the fitness of an editable A is higher than an uneditable A or a genomically encoded G.
    Description: This research was supported by a grants from the United States–Israel Binational Science Foundation (BSF), Jerusalem, Israel (BSF2017262 to J.J.C.R. and E.E.), the Israel Science Foundation (3371/20 to E.E.) and the National Science Foundation (IOS 1827509 and 1557748 to J.J.C.R).
    Keywords: RNA editing ; Adaptation ; Evolution
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 19
    Publication Date: 2022-10-12
    Description: Author Posting. © The Author(s), 2022. This is the author's version of the work. It is posted here by permission of Oxford University Press for personal use, not for redistribution. The definitive version was published in Integrative & Comparative Biology 62(3), (2022): 805-816, https://doi.org/10.1093/icb/icac108.
    Description: Skates are a diverse group of dorso-ventrally compressed cartilaginous fish found primarily in high-latitude seas. These slow-growing oviparous fish deposit their fertilized eggs into cases, which then rest on the seafloor. Developing skates remain in their cases for 1–4 years after they are deposited, meaning the abiotic characteristics of the deposition sites, such as current and substrate type, must interact with the capsule in a way to promote long residency. Egg cases are morphologically variable and can be identified to species. Both the gross morphology and the microstructures of the egg case interact with substrate to determine how well a case stays in place on a current-swept seafloor. Our study investigated the egg case hydrodynamics of eight North Pacific skate species to understand how their morphology affects their ability to stay in place. We used a flume to measure maximum current velocity, or “break-away velocity,” each egg case could withstand before being swept off the substrate and a tilt table to measure the coefficient of static friction between each case and the substrate. We also used the programing software R to calculate theoretical drag on the egg cases of each species. For all flume trials, we found the morphology of egg cases and their orientation to flow to be significantly correlated with break-away velocity. In certain species, the morphology of the egg case was correlated with flow rate required to dislodge a case from the substrate in addition to the drag experienced in both the theoretical and flume experiments. These results effectively measure how well the egg cases of different species remain stationary in a similar habitat. Parsing out attachment biases and discrepancies in flow regimes of egg cases allows us to identify where we are likely to find other elusive species nursery sites. These results will aid predictive models for locating new nursery habitats and protective policies for avoiding the destruction of these nursery sites.
    Description: This work was supported by the NSF-REU and FHL Blinks-Beacon for funding JNE. And the Stephen and Ruth Wainwright Endowed Fellowship, BEACON and Hoag Awards, Robert T. Paine Experimental and Field Ecology Award, FHL Award, FHL Marine Science Fund, FHL Student Fund (Kohn), Patricia L. Dudley Endowment for funding KCH.
    Description: 2023-07-04
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 20
    Publication Date: 2022-05-27
    Description: Author Posting. © Oxford University Press, 2021. This article is posted here by permission of [publisher] for personal use, not for redistribution. The definitive version was published in Lund, S., Acton, G., Clement, B., Okada, M., & Keigwin, L. On the relationship between palaeomagnetic secular variation and excursions-records from MIS 8-ODP leg 172. Geophysical Journal International, 225(2), (2021): 1129-1141, https://doi.org/10.1093/gji/ggaa564.
    Description: Palaeomagnetic secular variation (PSV) and excursion data obtained across MIS 8 (243–300 ka) from the western North Atlantic Ocean ODP (Ocean Drilling Program) sites 1060–1063 show composite high-resolution PSV records (both directions and relative palaeointensity) developed for each site and intercompared. Two methods of chronostratigraphy allow us to date these records. First, we used published results that compared the calcium carbonate records of ODP Leg 172 sediments and tuned them with Milankovich cyclicity. We also compared our palaeointensity records with the PISO-1500 global palaeointensity record that was dated with oxygen isotope stratigraphy. We prefer the PISO-1500 record to date our cores. Two excursions are preserved in our PSV records—Excursions 8α and 9α. Our revised age estimates for both excursions are 8α (236.7–239.8 ka) and 9α (283.7–286.9 ka). We have compared shipboard measurements of the two excursions with u-channel measurements of selected excursion intervals. Excursion 8α is interpreted as a ‘Class II’ excursion (local reversal) with in-phase inclination and declination changes; Excursion 9α is a ‘Class I’ excursion with 90° out-of-phase inclination and declination changes. Averaged directions (after removal of true excursional directions) and relative palaeointensity in 3 and 9 ka overlapping intervals show significant PSV directional variability over 104 yr timescales that is regionally correlatable among the four sites. A notable pattern of angular dispersion variability involves most time spent with low (∼10°) dispersion, with three shorter intervals of high (∼25°) dispersion. The relative palaeointensity variability also shows significant variability over 104 yr timescales with three notable intervals of low palaeointensity in all four records and a direct correspondence between the three low-palaeointensity intervals and the three intervals of high angular dispersion. The two magnetic field excursions occur in two of the three low-palaeointensity/high-dispersion intervals. This suggests that the geomagnetic field operates in two states between reversals, one with regular to high palaeointensity and low directional variability and one with low palaeointensity and significantly higher directional variability and excursions.
    Keywords: Geomagnetic excursions ; Palaeointensity ; Palaeomagnetic secular variation
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 21
    Publication Date: 2022-05-27
    Description: © The Author(s), 2021. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Suca, J. J., Wiley, D. N., Silva, T. L., Robuck, A. R., Richardson, D. E., Glancy, S. G., Clancey, E., Giandonato, T., Solow, A. R., Thompson, M. A., Hong, P., Baumann, H., Kaufman, L., & Llopiz, J. K. Sensitivity of sand lance to shifting prey and hydrography indicates forthcoming change to the northeast US shelf forage fish complex. Ices Journal of Marine Science, 78(3), (2021): 1023–1037, https://doi.org/10.1093/icesjms/fsaa251.
    Description: Northern sand lance (Ammodytes dubius) and Atlantic herring (Clupea harengus) represent the dominant lipid-rich forage fish species throughout the Northeast US shelf and are critical prey for numerous top predators. However, unlike Atlantic herring, there is little research on sand lance or information about drivers of their abundance. We use intra-annual measurements of sand lance diet, growth, and condition to explain annual variability in sand lance abundance on the Northeast US Shelf. Our observations indicate that northern sand lance feed, grow, and accumulate lipids in the late winter through summer, predominantly consuming the copepod Calanus finmarchicus. Sand lance then cease feeding, utilize lipids, and begin gonad development in the fall. We show that the abundance of C. finmarchicus influences sand lance parental condition and recruitment. Atlantic herring can mute this effect through intra-guild predation. Hydrography further impacts sand lance abundance as increases in warm slope water decrease overwinter survival of reproductive adults. The predicted changes to these drivers indicate that sand lance will no longer be able to fill the role of lipid-rich forage during times of low Atlantic herring abundance—changing the Northeast US shelf forage fish complex by the end of the century.
    Description: Research was funded by the Bureau of Ocean Energy Management (IA agreement M17PG0019; DNW, LK, HB, and JKL), including a subaward via the National Marine Sanctuary Foundation (18-11-B-203). Additional support came from the National Oceanic and Atmospheric Administration Woods Hole Sea Grant Program (NA18OAR4170104, Project No. R/O-57; JKL, HB, and DNW) and a National Science Foundation Long-term Ecological Research grant for the Northeast US Shelf Ecosystem (OCE 1655686; JKL). JJS was funded by the National Science Foundation Graduate Research Fellowship programme. ARR was funded by an NOAA Nancy Foster Scholarship.
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 22
    Publication Date: 2022-08-26
    Description: This article has been accepted for publication in Geophysical Journal International ©: The Authors 2022. Published by Oxford University Press on behalf of the Royal Astronomical Society. All rights reserved. Uploaded in accordance with the publisher's self-archiving policy.
    Description: Defining the regional variability of minimum magnitude for earthquake detection is crucial for planning seismic networks. Knowing the earthquake detection magnitude values is fundamental for the optimal location of new stations and to select the priority for reactivating the stations of a seismic network in case of a breakdown. In general, the assessment of earthquake detection is performed by analysing seismic noise with spectral or more sophisticated methods. Further, to simulate amplitude values at the recording sites, spectral methods require knowledge of several geophysical parameters including rock density, S-wave velocity, corner frequency, quality factor, site specific decay parameter and so on, as well as a velocity model for the Earth's interior. The simulation results are generally expressed in terms of Mw and therefore a further conversion must be done to obtain the values of local magnitude (ML), which is the parameter commonly used for moderate and small earthquakes in seismic catalogues. Here, the relationship utilized by a seismic network to determine ML is directly applied to obtain the expected amplitude [in mm, as if it were recorded by a Wood–Anderson (WA) seismometer] at the recording site, without any additional assumptions. The station detection estimates are obtained by simply considering the ratio of the expected amplitude with respect to the background noise, also measured in mm. The seismic noise level for the station is estimated starting from four waveforms (each signal lasting 1 min) sampled at various times of the day for a period of one week. The proposed method is tested on Italian seismic events occurring in 2019 by using the locations of 16.879 earthquakes recorded by 374 stations. The first results indicate that by evaluating the station noise level with 5-s windows, a representative sample of the variability in expected noise level is generated for every station, even if only 4 min of signal per day over a week of recordings is used. The method was applied to define the detection level of the Italian National Seismic Network (RSN). The RSN detection level represents a reference for the definition and application of guidelines in the field of monitoring of subsurface industrial activities in Italy. The proposed approach can be successfully applied to define the current performance of a local seismic network (managed by private companies) and to estimate the expected further improvements, requested to fulfil the guidelines with the installation of new seismic stations. This method has been tested in Italy and can be reproduced wherever the local magnitude ML, based on synthetic WA records, is used.
    Description: Published
    Description: 1283–1297
    Description: 4T. Sismicità dell'Italia
    Description: JCR Journal
    Keywords: Time-series analysis ; Earthquake ground motions ; Seismic noise ; Induced seismicity ; 04.06. Seismology ; 05.04. Instrumentation and techniques of general interest
    Repository Name: Istituto Nazionale di Geofisica e Vulcanologia (INGV)
    Type: article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 23
    Publication Date: 2022-08-19
    Description: © The Author(s), 2022. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Aoki, L. R., Brisbin, M. M., Hounshell, A. G., Kincaid, D. W., Larson, E., Sansom, B. J., Shogren, A. J., Smith, R. S., & Sullivan-Stack, J. Preparing aquatic research for an extreme future: call for improved definitions and responsive, multidisciplinary approaches. Bioscience, 72(6), (2022): 508-520, https://doi.org/10.1093/biosci/biac020.
    Description: Extreme events have increased in frequency globally, with a simultaneous surge in scientific interest about their ecological responses, particularly in sensitive freshwater, coastal, and marine ecosystems. We synthesized observational studies of extreme events in these aquatic ecosystems, finding that many studies do not use consistent definitions of extreme events. Furthermore, many studies do not capture ecological responses across the full spatial scale of the events. In contrast, sampling often extends across longer temporal scales than the event itself, highlighting the usefulness of long-term monitoring. Many ecological studies of extreme events measure biological responses but exclude chemical and physical responses, underscoring the need for integrative and multidisciplinary approaches. To advance extreme event research, we suggest prioritizing pre- and postevent data collection, including leveraging long-term monitoring; making intersite and cross-scale comparisons; adopting novel empirical and statistical approaches; and developing funding streams to support flexible and responsive data collection.
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 24
    Publication Date: 2022-06-07
    Description: Author Posting. © The Author(s), 2021. This is the author's version of the work. It is posted here by permission of Oxford University Press for personal use, not for redistribution. The definitive version was published in Toxicological Sciences 182(20), (2021): 310-326, https://doi.org/10.1093/toxsci/kfab066.
    Description: Harmful algal blooms produce potent neurotoxins that accumulate in seafood and are hazardous to human health. Developmental exposure to the harmful algal bloom toxin, domoic acid (DomA), has behavioral consequences well into adulthood, but the cellular and molecular mechanisms of DomA developmental neurotoxicity are largely unknown. To assess these, we exposed zebrafish embryos to DomA during the previously identified window of susceptibility and used the well-known startle response circuit as a tool to identify specific neuronal components that are targeted by exposure to DomA. Exposure to DomA reduced startle responsiveness to both auditory/vibrational and electrical stimuli, and even at the highest stimulus intensities tested, led to a dramatic reduction of one type of startle (short-latency c-starts). Furthermore, DomA-exposed larvae had altered kinematics for both types of startle responses tested, exhibiting shallower bend angles and slower maximal angular velocities. Using vital dye staining, immunolabeling, and live imaging of transgenic lines, we determined that although the sensory inputs were intact, the reticulospinal neurons required for short-latency c-starts were absent in most DomA-exposed larvae. Furthermore, axon tracing revealed that DomA-treated larvae also showed significantly reduced primary motor neuron axon collaterals. Overall, these results show that developmental exposure to DomA targets large reticulospinal neurons and motor neuron axon collaterals, resulting in measurable deficits in startle behavior. They further provide a framework for using the startle response circuit to identify specific neural populations disrupted by toxins or toxicants and to link these disruptions to functional consequences for neural circuit function and behavior.
    Description: This research was supported by a WHOI Von Damm and Ocean Ridge Initiative Fellowships to J.M.P. and the Woods Hole Center for Oceans and Human Health (NIH: P01ES021923 and P01ES028938; NSF: OCE-1314642 and OCE-1840381).
    Description: 2022-06-07
    Keywords: domoic acid ; harmful algal blooms ; harmful algal bloom toxins ; developmental toxicity ; startle response ; escape response ; startle circuit
    Repository Name: Woods Hole Open Access Server
    Type: Preprint
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 25
    Publication Date: 2022-05-26
    Description: © The Author(s), 2020. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Beckman, N. G., Asian, C. E., Rogers, H. S., Kogan, O., Bronstein, J. L., Bullock, J. M., Hartig, F., HilleRisLambers, J., Zhou, Y., Zurell, D., Brodie, J. F., Bruna, E. M., Cantrell, R. S., Decker, R. R., Efiom, E., Fricke, E. C., Gurski, K., Hastings, A., Johnson, J. S., Loiselle, B. A., Miriti, M. N., Neubert, M. G., Pejchar, L., Poulsen, J. R., Pufal, G., Razafindratsima, O. H., Sandor, M. E., Shea, K., Schreiber, S., Schupp, E. W., Snell, R. S., Strickland, C., & Zambrano, J. Advancing an interdisciplinary framework to study seed dispersal ecology. Aob Plants, 12(2), (2020): plz048, doi:10.1093/aobpla/plz048.
    Description: Although dispersal is generally viewed as a crucial determinant for the fitness of any organism, our understanding of its role in the persistence and spread of plant populations remains incomplete. Generalizing and predicting dispersal processes are challenging due to context dependence of seed dispersal, environmental heterogeneity and interdependent processes occurring over multiple spatial and temporal scales. Current population models often use simple phenomenological descriptions of dispersal processes, limiting their ability to examine the role of population persistence and spread, especially under global change. To move seed dispersal ecology forward, we need to evaluate the impact of any single seed dispersal event within the full spatial and temporal context of a plant’s life history and environmental variability that ultimately influences a population’s ability to persist and spread. In this perspective, we provide guidance on integrating empirical and theoretical approaches that account for the context dependency of seed dispersal to improve our ability to generalize and predict the consequences of dispersal, and its anthropogenic alteration, across systems. We synthesize suitable theoretical frameworks for this work and discuss concepts, approaches and available data from diverse subdisciplines to help operationalize concepts, highlight recent breakthroughs across research areas and discuss ongoing challenges and open questions. We address knowledge gaps in the movement ecology of seeds and the integration of dispersal and demography that could benefit from such a synthesis. With an interdisciplinary perspective, we will be able to better understand how global change will impact seed dispersal processes, and potential cascading effects on plant population persistence, spread and biodiversity.
    Description: Ideas for this manuscript initiated during the Seed Dispersal Workshop held in May 2016 at the Socio-Environmental Synthesis Center in Annapolis, MD and supported by the US National Science Foundation Grant DEB-1548194 to N.G.B. and the National Socio-Environmental Synthesis Center under the US National Science Foundation Grant DBI-1052875. D.Z. received funding from the Swiss National Science Foundation (SNF, grant: PZ00P3_168136/1) and from the German Science Foundation (DFG, grant: ZU 361/1-1).
    Keywords: Analytical models ; demography ; global change ; individual-based models ; long-distance seed dispersal ; population models ; seed dispersal
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 26
    Publication Date: 2022-05-26
    Description: © The Author(s), 2020. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Bowen, J. L., Giblin, A. E., Murphy, A. E., Bulseco, A. N., Deegan, L. A., Johnson, D. S., Nelson, J. A., Mozdzer, T. J., & Sullivan, H. L. Not all nitrogen is created equal: differential effects of nitrate and ammonium enrichment in coastal wetlands. Bioscience, 70(12), (2020): 1108-1119, doi:10.1093/biosci/biaa140.
    Description: Excess reactive nitrogen (N) flows from agricultural, suburban, and urban systems to coasts, where it causes eutrophication. Coastal wetlands take up some of this N, thereby ameliorating the impacts on nearshore waters. Although the consequences of N on coastal wetlands have been extensively studied, the effect of the specific form of N is not often considered. Both oxidized N forms (nitrate, NO3−) and reduced forms (ammonium, NH4+) can relieve nutrient limitation and increase primary production. However, unlike NH4+, NO3− can also be used as an electron acceptor for microbial respiration. We present results demonstrating that, in salt marshes, microbes use NO3− to support organic matter decomposition and primary production is less stimulated than when enriched with reduced N. Understanding how different forms of N mediate the balance between primary production and decomposition is essential for managing coastal wetlands as N enrichment and sea level rise continue to assail our coasts.
    Description: This work was supported by the following funding sources: National Science Foundation (NSF) grant no. DEB 1902712 to LAD, JLB, DSJ, and TJM; NSF grant no. DEB 1902695 to AEG; NSF grant no. DEB 1902704 to JAN; NSF grant no. DEB 1354214 to TJM; NSF grant no. DEB 1350491 to JLB; NSF grant no. OCE 1637630 to AEG and LAD; and additional funding from the Dorr Foundation, the Department of the Interior Northeast Climate Science Center (grant no. DOI G12AC00001), and a Bullard Fellowship (Harvard University) to LAD and from the National Academies of Science, Medicine, and Engineering Gulf Research Program to JAN. Resources purchased with funds from the NSF Biological Field Stations and Marine Laboratories program (grant no. DBI 1722553, to Northeastern University) were used to generate the data for the manuscript. Initial conversations on the effects of nutrient enrichment in marshes with Scott Warren and Bruce Peterson were critical in informing the work described in the manuscript. Sam Kelsey and Jane Tucker contributed to much of the N cycling biogeochemistry; Caitlin Bauer, Frankie Leach, Paige Weber, Emily Geoghegan and Sophie Drew assisted with field work; and Joe Vineis assisted with metagenomic analysis. This is contribution 3941 from the Virginia Institute of Marine Science. The data were compiled from multiple published sources. Links to published data can be found here: https://pie-lter.ecosystems.mbl.edu/data. The sequence data used to derive figure 6 are publicly available on the MG-RAST website under project number mgp84173.
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 27
    Publication Date: 2022-05-27
    Description: © The Author(s), 2021. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Hirschberger, C., Sleight, V. A., Criswell, K. E., Clark, S. J., & Gillis, J. A. Conserved and unique transcriptional features of pharyngeal arches in the skate (Leucoraja erinacea) and evolution of the jaw. Molecular Biology and Evolution, (2021): msab123, https://doi.org/10.1093/molbev/msab123
    Description: The origin of the jaw is a long-standing problem in vertebrate evolutionary biology. Classical hypotheses of serial homology propose that the upper and lower jaw evolved through modifications of dorsal and ventral gill arch skeletal elements, respectively. If the jaw and gill arches are derived members of a primitive branchial series, we predict that they would share common developmental patterning mechanisms. Using candidate and RNAseq/differential gene expression analyses, we find broad conservation of dorsoventral patterning mechanisms within the developing mandibular, hyoid and gill arches of a cartilaginous fish, the skate (Leucoraja erinacea). Shared features include expression of genes encoding members of the ventralising BMP and endothelin signalling pathways and their effectors, the joint markers nkx3.2 and gdf5 and pro-chondrogenic transcription factor barx1, and the dorsal territory marker pou3f3. Additionally, we find that mesenchymal expression of eya1/six1 is an ancestral feature of the mandibular arch of jawed vertebrates, while differences in notch signalling distinguish the mandibular and gill arches in skate. Comparative transcriptomic analyses of mandibular and gill arch tissues reveal additional genes differentially expressed along the dorsoventral axis of the pharyngeal arches, including scamp5 as a novel marker of the dorsal mandibular arch, as well as distinct transcriptional features of mandibular and gill arch muscle progenitors and developing gill buds. Taken together, our findings reveal conserved patterning mechanisms in the pharyngeal arches of jawed vertebrates, consistent with serial homology of their skeletal derivatives, as well as unique transcriptional features that may underpin distinct jaw and gill arch morphologies.
    Description: This work was supported by a Biotechnology and Biological Sciences Research Council Doctoral Training Partnership studentship to CH, by a Wolfson College Junior Research Fellowship and MBL Whitman Early Career Fellowship to VAS, and by a Royal Society University Research Fellowship (UF130182 and URF\R\191007), Royal Society Research Grant (RG140377) and University of Cambridge Sir Isaac Newton Trust Grant (14.23z) to JAG.
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 28
    Publication Date: 2022-05-27
    Description: © The Author(s), 2021. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Suca, J. J., Deroba, J. J., Richardson, D. E., Ji, R., & Llopiz, J. K. Environmental drivers and trends in forage fish occupancy of the Northeast US shelf. Ices Journal of Marine Science, 78(10), (2021): 3687–3708, https://doi.org/10.1093/icesjms/fsab214.
    Description: The Northeast US shelf ecosystem is undergoing unprecedented changes due to long-term warming trends and shifts in regional hydrography leading to changes in community composition. However, it remains uncertain how shelf occupancy by the region's dominant, offshore small pelagic fishes, also known as forage fishes, has changed throughout the late 20th and early 21st centuries. Here, we use species distribution models to estimate the change in shelf occupancy, mean weighted latitude, and mean weighted depth of six forage fishes on the Northeast US shelf, and whether those trends were linked to coincident hydrographic conditions. Our results suggest that observed shelf occupancy is increasing or unchanging for most species in both spring and fall, linked both to gear shifts and increasing bottom temperature and salinity. Exceptions include decreases to observed shelf occupancy by sand lance and decreases to Atlantic herring's inferred habitat suitability in the fall. Our work shows that changes in shelf occupancy and inferred habitat suitability have varying coherence, indicating complex mechanisms behind observed shelf occupancy for many species. Future work and management can use these results to better isolate the aspects of forage fish life histories that are important for determining their occupancy of the Northeast US shelf.
    Description: Funding came from the National Oceanic and Atmospheric Administration Woods Hole Sea Grant Program (NA18OAR4170104, Project number R/O-57; RJ and JKL) and a National Science Foundation Long-term Ecological Research grant for the Northeast US Shelf Ecosystem (OCE1655686; RJ and JKL). JJS was funded by the National Science Foundation Graduate Research Fellowship program.
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 29
    Publication Date: 2022-05-26
    Description: © The Author(s), 2020. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Doo, S. S., Kealoha, A., Andersson, A., Cohen, A. L., Hicks, T. L., Johnson, Z., I., Long, M. H., McElhany, P., Mollica, N., Shamberger, K. E. F., Silbiger, N. J., Takeshita, Y., & Busch, D. S. The challenges of detecting and attributing ocean acidification impacts on marine ecosystems. ICES Journal of Marine Science, 77(7-8), (2020): 2411-2422, https://doi.org/10.1093/icesjms/fsaa094.
    Description: A substantial body of research now exists demonstrating sensitivities of marine organisms to ocean acidification (OA) in laboratory settings. However, corresponding in situ observations of marine species or ecosystem changes that can be unequivocally attributed to anthropogenic OA are limited. Challenges remain in detecting and attributing OA effects in nature, in part because multiple environmental changes are co-occurring with OA, all of which have the potential to influence marine ecosystem responses. Furthermore, the change in ocean pH since the industrial revolution is small relative to the natural variability within many systems, making it difficult to detect, and in some cases, has yet to cross physiological thresholds. The small number of studies that clearly document OA impacts in nature cannot be interpreted as a lack of larger-scale attributable impacts at the present time or in the future but highlights the need for innovative research approaches and analyses. We summarize the general findings in four relatively well-studied marine groups (seagrasses, pteropods, oysters, and coral reefs) and integrate overarching themes to highlight the challenges involved in detecting and attributing the effects of OA in natural environments. We then discuss four potential strategies to better evaluate and attribute OA impacts on species and ecosystems. First, we highlight the need for work quantifying the anthropogenic input of CO2 in coastal and open-ocean waters to understand how this increase in CO2 interacts with other physical and chemical factors to drive organismal conditions. Second, understanding OA-induced changes in population-level demography, potentially increased sensitivities in certain life stages, and how these effects scale to ecosystem-level processes (e.g. community metabolism) will improve our ability to attribute impacts to OA among co-varying parameters. Third, there is a great need to understand the potential modulation of OA impacts through the interplay of ecology and evolution (eco–evo dynamics). Lastly, further research efforts designed to detect, quantify, and project the effects of OA on marine organisms and ecosystems utilizing a comparative approach with long-term data sets will also provide critical information for informing the management of marine ecosystems.
    Description: SSD was funded by NSF OCE (grant # 1415268). DSB and PM were supported by the NOAA Ocean Acidification Program and Northwest Fisheries Science Center, MHL was supported by NSF OCE (grant # 1633951), ZIJ was supported by NSF OCE (grant # 1416665) and DOE EERE (grant #DE-EE008518), NJS was supported by NSF OCE (grant # 1924281), ALC was supported by NSF OCE (grant # 1737311), and AA was supported by NSF OCE (grant # 1416518). KEFS, AK, and TLH were supported by Texas A&M University. This is CSUN Marine Biology contribution (# 306).
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 30
    Publication Date: 2022-05-26
    Description: Author Posting. © The Author(s), 2020. This is the author's version of the work. It is posted here by permission of Oxford University Press for personal use, not for redistribution. The definitive version was published in Toxicological Sciences (2020): kfaa158, doi:10.1093/toxsci/kfaa158.
    Description: Chemical modifications of proteins, DNA, and RNA moieties play critical roles in regulating gene expression. Emerging evidence suggests the RNA modifications (epitranscriptomics) have substantive roles in basic biological processes. One of the most common modifications in mRNA and noncoding RNAs is N6-methyladenosine (m6A). In a subset of mRNAs, m6A sites are preferentially enriched near stop codons, in 3′ UTRs, and within exons, suggesting an important role in the regulation of mRNA processing and function including alternative splicing and gene expression. Very little is known about the effect of environmental chemical exposure on m6A modifications. As many of the commonly occurring environmental contaminants alter gene expression profiles and have detrimental effects on physiological processes, it is important to understand the effects of exposure on this important layer of gene regulation. Hence, the objective of this study was to characterize the acute effects of developmental exposure to PCB126, an environmentally relevant dioxin-like PCB, on m6A methylation patterns. We exposed zebrafish embryos to PCB126 for 6 h starting from 72 h post fertilization and profiled m6A RNA using methylated RNA immunoprecipitation followed by sequencing (MeRIP-seq). Our analysis revealed 117 and 217 m6A peaks in the DMSO and PCB126 samples (false discovery rate 5%), respectively. The majority of the peaks were preferentially located around the 3′ UTR and stop codons. Statistical analysis revealed 15 m6A marked transcripts to be differentially methylated by PCB126 exposure. These include transcripts that are known to be activated by AHR agonists (eg, ahrra, tiparp, nfe2l2b) as well as others that are important for normal development (vgf, cebpd, sned1). These results suggest that environmental chemicals such as dioxin-like PCBs could affect developmental gene expression patterns by altering m6A levels. Further studies are necessary to understand the functional consequences of exposure-associated alterations in m6A levels.
    Description: National Institute of Health National Institute of Environmental Health Sciences Outstanding New Environmental Scientist (NIH R01ES024915 to N.A.); Woods Hole Center for Oceans and Human Health [National Institutes of Health (NIH) (Grant P01ES028938); National Science Foundation (Grant OCE-1840381) to M. E. Hahn, J. J. Stegeman, N.A., and S.K.].
    Description: 2021-10-16
    Keywords: dioxin-like PCBs ; development ; zebrafish ; epitranscriptomics ; m6A ; MeRIP
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 31
    Publication Date: 2022-05-26
    Description: © The Author(s), 2020. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Lamb, D. C., Hargrove, T. Y., Zhao, B., Wawrzak, Z., Goldstone, J. V., Nes, W. D., Kelly, S. L., Waterman, M. R., Stegeman, J. J., & Lepesheva, G. I. Concerning P450 evolution: structural analyses support bacterial origin of sterol 14α-demethylases. Molecular Biology and Evolution, (2020): msaa260, doi:10.1093/molbev/msaa260.
    Description: Sterol biosynthesis, primarily associated with eukaryotic kingdoms of life, occurs as an abbreviated pathway in the bacterium Methylococcus capsulatus. Sterol 14α-demethylation is an essential step in this pathway and is catalyzed by cytochrome P450 51 (CYP51). In M. capsulatus, the enzyme consists of the P450 domain naturally fused to a ferredoxin domain at the C-terminus (CYP51fx). The structure of M. capsulatus CYP51fx was solved to 2.7 Å resolution and is the first structure of a bacterial sterol biosynthetic enzyme. The structure contained one P450 molecule per asymmetric unit with no electron density seen for ferredoxin. We connect this with the requirement of P450 substrate binding in order to activate productive ferredoxin binding. Further, the structure of the P450 domain with bound detergent (which replaced the substrate upon crystallization) was solved to 2.4 Å resolution. Comparison of these two structures to the CYP51s from human, fungi, and protozoa reveals strict conservation of the overall protein architecture. However, the structure of an “orphan” P450 from nonsterol-producing Mycobacterium tuberculosis that also has CYP51 activity reveals marked differences, suggesting that loss of function in vivo might have led to alterations in the structural constraints. Our results are consistent with the idea that eukaryotic and bacterial CYP51s evolved from a common cenancestor and that early eukaryotes may have recruited CYP51 from a bacterial source. The idea is supported by bioinformatic analysis, revealing the presence of CYP51 genes in 〉1,000 bacteria from nine different phyla, 〉50 of them being natural CYP51fx fusion proteins.
    Description: The study was supported by National Institutes of Health (Grant No. R01 GM067871 to G.I.L.) and by a UK-USA Fulbright Scholarship and the Royal Society (to D.C.L.).
    Keywords: sterol biosynthesis ; evolution ; cytochrome P450 ; CYP51 redox partner ; crystallography
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 32
    Publication Date: 2022-05-26
    Description: © The Author(s), 2019. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Zemeckis, D. R., Dean, M. J., DeAngelis, A. I., Van Parijs, S. M., Hoffman, W. S., Baumgartner, M. F., Hatch, L. T., Cadrin, S. X., & McGuire, C. H. Identifying the distribution of Atlantic cod spawning using multiple fixed and glider-mounted acoustic technologies. ICES Journal of Marine Science, 76(6), (2019): 1610-1625, doi: 10.1093/icesjms/fsz064.
    Description: Effective fishery management measures to protect fish spawning aggregations require reliable information on the spatio-temporal distribution of spawning. Spawning closures have been part of a suite of fishery management actions to rebuild the Gulf of Maine stock of Atlantic cod (Gadus morhua), but difficulties remain with managing rebuilding. The objective of this study was to identify the spatial and temporal distribution of cod spawning during winter in Massachusetts Bay to improve our understanding of cod spawning dynamics and inform fisheries management. Spawning was investigated in collaboration with commercial fishermen during three winter spawning seasons (October 2013–March 2016) using acoustic telemetry and passive acoustic monitoring equipment deployed in fixed-station arrays and mounted on mobile autonomous gliders. Tagged cod exhibited spawning site fidelity and spawning primarily occurred from early November through January with a mid-December peak and some inter-annual variability. The spatial distribution of spawning was generally consistent among years with multiple hotspots in areas 〉50 m depth. Current closures encompass most of spawning, but important areas are recommended for potential modifications. Utilizing multiple complementary technologies and deployment strategies in collaboration with commercial fishermen enabled a comprehensive description of spawning and provides a valuable model for future studies.
    Description: Year 1 was jointly funded by The Nature Conservancy and Massachusetts Division of Marine Fisheries. The remainder of this research was funded through the 2013–2014 NOAA Saltonstall Kennedy grant program (Award No. NA14NMF4270027) with additional support from the Nature Conservancy and Cabot Family Charitable Foundation.
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 33
    Publication Date: 2022-05-26
    Description: © The Author(s), 2019. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Dong, E., Zhang, Y., Song, Z., Zhang, T., Cai, C., & Fang, N. X. Physical modeling and validation of porpoises' directional emission via hybrid metamaterials. National Science Review, 6(5), (2019): 921-928, doi:10.1093/nsr/nwz085.
    Description: In wave physics and engineering, directional emission sets a fundamental limitation on conventional simple sources as their sizes should be sufficiently larger than their wavelength. Artificial metamaterial and animal biosonar both show potential in overcoming this limitation. Existing metamaterials arranged in periodic microstructures face great challenges in realizing complex and multiphase biosonar structures. Here, we proposed a physical directional emission model to bridge the gap between porpoises’ biosonar and artificial metamaterial. Inspired by the anatomical and physical properties of the porpoise's biosonar transmission system, we fabricated a hybrid metamaterial system composed of multiple composite structures. We validated that the hybrid metamaterial significantly increased directivity and main lobe energy over a broad bandwidth both numerically and experimentally. The device displayed efficiency in detecting underwater target and suppressing false target jamming. The metamaterial-based physical model may be helpful to achieve the physical mechanisms of porpoise biosonar detection and has diverse applications in underwater acoustic sensing, ultrasound scanning, and medical ultrasonography.
    Description: E.D., Y.Z., Z.S., T.Z. and C.C. acknowledge the financial support in part by the National Key Research and Development Program of China (2018YFC1407504), the National Natural Science Foundation of China (41676023, 41276040 and 41422604). N.X.F. acknowledges the support from the MIT Energy Initiative grant. Z.S. thanks the China Scholarship Council for the financial support of his oversea study in Woods Hole Oceanographic Institution.
    Keywords: porpoise's physical model ; metamaterials ; biosonar ; directional emission
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 34
    Publication Date: 2022-05-26
    Description: © The Author(s), 2019. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Lin, J., Xu, Y., Sun, Z., & Zhou, Z. Mantle upwelling beneath the South China Sea and links to surrounding subduction systems. National Science Review, 6(5), (2019): 877-881, doi:10.1093/nsr/nwz123.
    Description: The evolution of the South China Sea (SCS) is directly linked to the complex subduction systems of the surrounding Pacific, Philippine Sea and Indo-Australian Plates (Fig. 1a). Major advances in the last several years are providing new insights into the SCS-mantle dynamics, through regional seismic imaging of the upper mantle [1,2], unprecedented IODP drilling expeditions (349/367/368/368X) [3–5] that obtained the oceanic basement basalt samples for the first time, geochemical analyses of the SCS-mantle source compositions [6–8] and geodynamic modeling [9,10]. Furthermore, new geological mapping, seismic imaging [11,12] and IODP drilling [13,14] have revealed evidence for significantly greater magma production at the northern SCS rifted margin, in comparison to the magma-poor end-member of the Atlantic rifted margins. This paper provides a new perspective of the SCS-mantle dynamics inspired by new observations and geodynamic modeling. We first highlight new geophysical evidence for a broad region of low-seismic-velocity anomalies in the upper mantle beneath the northern SCS, abundant magmatism during continental breakup and post-seafloor spreading, and geochemical evidence for recycled oceanic components beneath the SCS. We then present new models of layered flows in the mantle beneath the SCS, revealing two modes of plate- and subduction-driven mantle upwelling, including (i) narrow centers of mantle upwelling at shallow depths induced by divergent plate motion at seafloor-spreading centers and (ii) broad zones of mantle upwelling as a result of subduction-induced mantle-return flows at greater depths. These new observations and geodynamic studies suggest strong links between mantle upwelling beneath the SCS and surrounding subducting plates.
    Description: This work was supported by the National Natural Science Foundation of China (41890813, 91628301, U1606401, 41976066, 91858207 and 41706056), the Chinese Academy of Sciences (Y4SL021001, QYZDY-SSW-DQC005 and 133244KYSB20180029), the Southern Marine Science and Engineering Guangdong Laboratory (Guangzhou, GML2019ZD0205), the National Key R&D Program of China (2018YFC0309800 and 2018YFC0310100), the State Oceanic Administration (GASI-GEOGE-02) and China Ocean Mineral Resources R&D Association (DY135-S2–1-04).
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 35
    Publication Date: 2022-05-26
    Description: © The Author(s), 2019. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Sun, Z., Lin, J., Qiu, N., Jian, Z., Wang, P., Pang, X., Zheng, J., & Zhu, B. The role of magmatism in the thinning and breakup of the South China Sea continental margin: Special Topic: the South China Sea Ocean Drilling. National Science Review, 6(5), (2019): 871-876, doi:10.1093/nsr/nwz116.
    Description: Magmatism plays a key role in the process of continental margin breakup and ocean formation. Even in the extremely magma-poor Iberia and Newfoundland margin, studies of field outcrops have shown that syn-rift magmatism had participated in rifting from a very early stage and contributed directly to the rifting process. The final transition from exhumed continental mantle to the ocean formation is also triggered by the accumulation and eruption of magma [1]. Therefore, Atlantic-type passive continental margins are classified into two end-members: magma-poor (non-volcanic) and magma-rich (volcanic). The differences between them lie in whether a large amount of intrusive and extrusive magmatism from the mantle plume/hotspot is involved in the syn-rift and breakup stages. A magma-rich margin [2] should include the following characteristics: (i) a high-velocity lower crust (HVLC) caused by syn-rift mafic magma underplating; (ii) continental crust intruded by abundant sills and dikes; (iii) a large volume of seaward-dipping reflectors (SDRs) caused by flood basalt eruption or tuffs. All other margins are classified as magma-poor margins.
    Description: We thank the research team project of Guangdong Natural Science Foundation (2017A030312002), IODP-China and South China Sea Deep Project (91628301) and K.C. Wong Education Foundation (GJTD-2018-13) for providing support for the research. This research was also supported by the China National Science and Technology Major Project (2016ZX05026–003), the joint foundation of the National Natural Science Foundation of China and Guangdong province (U1301233), as well as the National Natural Science Foundation of China (41576070 and 41890813).
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 36
    Publication Date: 2022-10-26
    Description: © The Author(s), 2020. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Johnson, W. M., Alexander, H., Bier, R. L., Miller, D. R., Muscarella, M. E., Pitz, K. J., & Smith, H. Auxotrophic interactions: A stabilizing attribute of aquatic microbial communities? FEMS Microbiology Ecology, (2020): fiaa115, doi: 10.1093/femsec/fiaa115.
    Description: Auxotrophy, or an organism's requirement for an exogenous source of an organic molecule, is widespread throughout species and ecosystems. Auxotrophy can result in obligate interactions between organisms, influencing ecosystem structure and community composition. We explore how auxotrophy-induced interactions between aquatic microorganisms affect microbial community structure and stability. While some studies have documented auxotrophy in aquatic microorganisms, these studies are not widespread, and we therefore do not know the full extent of auxotrophic interactions in aquatic environments. Current theoretical and experimental work suggests that auxotrophy links microbial community members through a complex web of metabolic dependencies. We discuss the proposed ways in which auxotrophy may enhance or undermine the stability of aquatic microbial communities, highlighting areas where our limited understanding of these interactions prevents us from being able to predict the ecological implications of auxotrophy. Finally, we examine an example of auxotrophy in harmful algal blooms to place this often theoretical discussion in a field context where auxotrophy may have implications for the development and robustness of algal bloom communities. We seek to draw attention to the relationship between auxotrophy and community stability in an effort to encourage further field and theoretical work that explores the underlying principles of microbial interactions.
    Description: This work was supported by the National Science Foundation [OCE-1356192].
    Keywords: Auxotrophy ; Microbial community stability ; Microbial interactions ; Aquatic
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 37
    Publication Date: 2022-10-26
    Description: © The Author(s), 2021. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Keller, A. G., Apprill, A., Lebaron, P., Robbins, J., Romano, T. A., Overton, E., Rong, Y., Yuan, R., Pollara, S., & Whalen, K. E. Characterizing the culturable surface microbiomes of diverse marine animals. FEMS Microbiology Ecology, 97(4), (2021): fiab040, https://doi.org/10.1093/femsec/fiab040.
    Description: Biofilm-forming bacteria have the potential to contribute to the health, physiology, behavior and ecology of the host and serve as its first line of defense against adverse conditions in the environment. While metabarcoding and metagenomic information furthers our understanding of microbiome composition, fewer studies use cultured samples to study the diverse interactions among the host and its microbiome, as cultured representatives are often lacking. This study examines the surface microbiomes cultured from three shallow-water coral species and two whale species. These unique marine animals place strong selective pressures on their microbial symbionts and contain members under similar environmental and anthropogenic stress. We developed an intense cultivation procedure, utilizing a suite of culture conditions targeting a rich assortment of biofilm-forming microorganisms. We identified 592 microbial isolates contained within 15 bacterial orders representing 50 bacterial genera, and two fungal species. Culturable bacteria from coral and whale samples paralleled taxonomic groups identified in culture-independent surveys, including 29% of all bacterial genera identified in the Megaptera novaeangliae skin microbiome through culture-independent methods. This microbial repository provides raw material and biological input for more nuanced studies which can explore how members of the microbiome both shape their micro-niche and impact host fitness.
    Description: Funding was provided by the National Science Foundation (Biological Oceanography) award #1657808 and National Institutes of Health grants 1R21-AI119311–01 to K. E. Whalen, as well as funding from the Koshland Integrated Natural Science Center and Green Fund at Haverford College. This constitutes scientific manuscript #298 from the Sea Research Foundation.
    Keywords: Bacteria ; SSU rRNA ; Coral ; Whale ; Microbiome ; Skin
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 38
    Publication Date: 2022-10-26
    Description: © The Author(s), 2019. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Wang, P., Huang, C., Lin, J., Jian, Z., Sun, Z., & Zhao, M. The South China Sea is not a mini-Atlantic: plate-edge rifting vs intra-plate rifting. National Science Review, 6(5), (2019): 902-913, doi:10.1093/nsr/nwz135.
    Description: The South China Sea, as ‘a non-volcanic passive margin basin’ in the Pacific, has often been considered as a small-scale analogue of the Atlantic. The recent ocean drilling in the northern South China Sea margin found, however, that the Iberian model of non-volcanic rifted margin from the Atlantic does not apply to the South China Sea. In this paper, we review a variety of rifted basins and propose to discriminate two types of rifting basins: plate-edge type such as the South China Sea and intra-plate type like the Atlantic. They not only differ from each other in structure, formation process, lifespan and geographic size, but also occur at different stages of the Wilson cycle. The intra-plate rifting occurred in the Mesozoic and gave rise to large oceans, whereas the plate-edge rifting took place mainly in the mid-Cenozoic, with three-quarters of the basins concentrated in the Western Pacific. As a member of the Western Pacific system of marginal seas, the South China Sea should be studied not in isolation on its origin and evolution, but in a systematic context to include also its neighboring counterparts.
    Description: This work was supported by the National Natural Science Foundation of China as a part of the ‘South China Sea Deep’ Project (91128000).
    Keywords: Rifting ; Marginal basin ; Passive margin ; South China Sea ; Western Pacific ; Subduction
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 39
    Publication Date: 2022-10-28
    Description: Relative relocation methods are commonly used to precisely relocate earthquake clusters consisting of similar waveforms. Repeating waveforms are often recorded at volcanoes, where, however, the crust structure is expected to contain strong heterogeneities and therefore the 1D velocity model assumption that is made in most location strategies is not likely to describe reality. A peculiar cluster of repeating low-frequency seismic events was recorded on the south flank of Katla volcano (Iceland) from 2011. As the hypocentres are located at the rim of the glacier, the seismicity may be due to volcanic or glacial processes. Information on the size and shape of the cluster may help constraining the source process. The extreme similarity of waveforms points to a very small spatial distribution of hypocentres. In order to extract meaningful information about size and shape of the cluster, we minimize uncertainty by optimizing the cross-correlation measurements and relative-relocation process. With a synthetic test we determine the best parameters for differential-time measurements and estimate their uncertainties, specifically for each waveform. We design a relocation strategy to work without a predefined velocity model, by formulating and inverting the problem to seek changes in both location and slowness, thus accounting for azimuth, take-off angles and velocity deviations from a 1D model. We solve the inversion explicitly in order to propagate data errors through the calculation. With this approach we are able to resolve a source volume few tens of meters wide on horizontal directions and around 100 meters in depth. There is no suggestion that the hypocentres lie on a single fault plane and the depth distribution indicates that their source is unlikely to be related to glacial processes as the ice thickness is not expected to exceed few tens of meters in the source area.
    Description: Published
    Description: 1244–1257
    Description: 5T. Sismologia, geofisica e geologia per l'ingegneria sismica
    Description: JCR Journal
    Keywords: Physics - Geophysics; Physics - Geophysics
    Repository Name: Istituto Nazionale di Geofisica e Vulcanologia (INGV)
    Type: article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 40
    Publication Date: 2022-11-10
    Description: © The Author(s), 2022. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Sassenhagen, I., Erdner, D., Lougheed, B., Richlen, M., & SjÖqvist, C. Estimating genotypic richness and proportion of identical multi-locus genotypes in aquatic microalgal populations. Journal of Plankton Research, 44(4), (2022): 559-572, https://doi.org/10.1093/plankt/fbac034.
    Description: The majority of microalgal species reproduce asexually, yet population genetic studies rarely find identical multi-locus genotypes (MLG) in microalgal blooms. Instead, population genetic studies identify large genotypic diversity in most microalgal species. This paradox of frequent asexual reproduction but low number of identical genotypes hampers interpretations of microalgal genotypic diversity. We present a computer model for estimating, for the first time, the number of distinct MLGs by simulating microalgal population composition after defined exponential growth periods. The simulations highlighted the effects of initial genotypic diversity, sample size and intraspecific differences in growth rates on the probability of isolating identical genotypes. We estimated the genotypic richness for five natural microalgal species with available high-resolution population genetic data and monitoring-based growth rates, indicating 500 000 to 2 000 000 distinct genotypes for species with few observed clonal replicates (〈5%). Furthermore, our simulations indicated high variability in genotypic richness over time and among microalgal species. Genotypic richness was also strongly impacted by intraspecific variability in growth rates. The probability of finding identical MLGs and sampling a representative fraction of genotypes decreased noticeably with smaller sample sizes, challenging the detection of differences in genotypic diversity with typical isolate numbers in the field.
    Description: This work was supported by the Olle Engkvist foundation [200-0564 to I.S.]; the Swedish Research Council (Vetenskapsrådet) [2018-04992 to B.C.L.]; the Academy of Finland [321609 to C.S.]; the National Science Foundation [NSF OCE-1841811 to D.L.E. and M.L.R.]; and the National Institute of Environmental Health [NIEHS P01ES028949 to M.L.R.].
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 41
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 150 (1987), S. 189-192 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Notes: A morphological study was made to examine the friction and wear mechanisms of ultrahigh molecular weight polyethylene in air and water by means of transmission electron microscopy of a carbon replica film of a very thin layer of the polymer surface slid against a steel ball. Electron diffractions revealed that a molecular orientation with a typical fiber pattern was formed in the friction in air, while thin ribbon-like crystals with particular crystal orientations were formed in water in a way that the sliding took place on the crystallographic a - c plane, giving rise to a low friction coefficient of the polymer.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 42
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 150 (1987), S. 137-150 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Es wurde der relative Wirkungsgrad von fünf handelsüblichen Stabilisatoren bei Photooxidation und thermischer Alterung von Polypropylen (PP) anhand der Änderungen der mechanischen Eigenschaften untersucht. Es wurden Polypropylenproben mit unterschiedlichem Anteil an Cyasorb UV-531 hergestellt (bezeichnet als PC0.5-31, PC1-31, PC1.5-31 und PC2-31). Der Einfluß der Photooxidation auf das thermische Verhalten ist mit Hilfe der Differentialscanningkalorimetrie und durch thermogravimetrische Analysen untersucht worden. 2-Hydroxy-4-n-octyloxybenzophenon (2 Gew.-%) war am wirksamsten, Polypropylen, gegen Verfärbung und Brüchigkeit zu stabilisieren. Bei einer Probe mit 1% Stabilisatorzusatz fanden sich nach 32 h Bestrahlung noch 81% des ursprünglichen Wertes der Streckgrenze gegenüber 18% bei unstabilisiertem PP.
    Notes: The relative effectiveness of five commercially available stabilizers on the photooxidation and thermal ageing of polypropylene (PP) was investigated by following changes in mechanical properties. Samples of PP containing different percentages of Cyasorb UV-531 were prepared (designated as PC0.5-31, PC1-31, PC1.5-31, and PC2-31, respectively). The effect of photooxidation on thermal behaviour was investigated by differential scanning calorimetry and thermogravimetric analysis. 2-Hydroxy-4-n-octyloxy benzophenone (2% w/w) was most effective in stabilizing PP towards discolouration and brittleness. After 32 h irradiation, 81% retention in yield strength was observed in case of PC1-31 against 18% in case of PP.
    Additional Material: 8 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 43
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Notes: The effects of the nature of the polyols used in polyurethane (PUR) synthesis on the structural transformations after ageing by UV irradiation has been studied. The investigations were performed on PUR prepared from polyester and polyether diol oligomers.The characterization of the samples before and after ageing in view of the structural changes, which influence the course of the photooxidative degradation and photocrosslinking as well as in view of changes of mechanical properties has been done. Comparative investigations were performed by spectroscopic and viscometric measurements.The results show pronounced heterogeneity of the degradative reactions, including the existence of crosslinking processes and producing thus very inhomogeneous polymeric material. The course and the intensity of photooxidative degradation of PUR differ together with changes of mechanical properties depending whether polyester or polyether polyol have been used. The processes of photooxidative degradation is less expressed in polyesterurethane then in polyurethane based on polyether, under the same conditions of experiments. Different structures of polyester diols caused the various ageing behaviour of PUR too.
    Additional Material: 11 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 44
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Notes: QUALIFICATION OF HALS COMPOUNDSA complex method of examination has been developed suitable for the qualification of light stabilizers; by this method, according to experience, the efficacy of HALS compounds can be extensively and expediently characterized.Several light stabilizers of the HALS-type were examined and qualified, used alone or together with a UV-absorber.It has been found that, when selecting the appropriate structure for a given polymer, the weatherability of polyolefine foils is effectively increase to six-eightfold; the increase is even tenfold when the stabilizer is combined with a benzophenone-type compound.As a utilization of these experiences, a contract with the industry, led to the production of an LDPE based agricultural foil with a life-time of several years.
    Additional Material: 11 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 45
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Notes: Natural hail impact tests are scarcely available because hailstorms are limited to a small area and cannot be predicted regarding time, place and intensity. Therefore we relied on laboratory tests simulating natural hailstones by polyamide balls (5-50 mm dia.) whose final velocity could be varied according to meteorological data. So the influence of diameter (weight) and velocity of the artificial hailstones could be taken into consideration independently.The energy of damage or equivalent natural hailstone diameter were determined for 16 mm double skin sheet from PMMA as 0.2 J (14 mm dia.) for star shaped cracks and 2 J (26 mm dia.) for holes. These values do not significantly decrease after 10 years weathering. 10 mm double skin sheets from PC show an extremly high energy of damage of abt. 10 J (38 mm dia.) which decreases to a medium level of 2 J (26 mm dia.) after several years weathering. This decrease is remarkably reduced by weather resistant protective coating.As hailstorms consist to more than 80% of hailstones below 10 mm dia. (0.04 J) the mentioned sheet materials are quite hail resistant also after long weathering periods, but they cannot withstand an extreme hail catastrophe as in Munich July 12, 1984.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 46
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Notes: The influence of the specimen temperature on many ageing processes is well known. Two aspects is dealt with: -Measurements of the specimen temperature on several positions of a specimen in commercial weathering devices at different exposure conditions. Technical measures to achieve to uniform ageing at all positions of a planar and homogeneous specimen. Examples from practical use.-Changing specimen temperatures (+60°C to -20°C) during the course of accelerated weathering, i.e. a combination of conventional accelerated weathering with a temperature cycle test.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 47
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: An Folien (Dicke 100 pm) aus isotaktischem Polypropylen mit verschiedenen Antioxidansgehalten (0,0% bis 0,1%) wird die thermooxidative Alterunq mit der isothermen Langzeit-Differential-Thermo-Analyse (ILDTA) bis zu Temperaturen weit unter dem Kristallitschmelzbereich verfolqt und die Messwerte mit Ergebnissen aus dem Zeitstand-Zugversuch korreliert. Dabei zeigt sich, daß aus Messunqen mit der ILDTA bereits vor Einsetzen der autokatalytischen Zersetzunq sreaktion Ruckschlüsse auf die thermische Vorqeschichte der Proben und Aussagen auf das rnit einem Abfall der mechanischen Eigenschaften verbundene Ende der thermo-oxidativen Stabilität des Polymeren getroffen werden können.Weiters bietet die ILDTA die Moglichkeit, durch den direkten Zusamenhang zwischen Oxidationszeit und Antioxidansögehalt die örtliche Stabilisatorverteilung in Platten und in Folien zu bestimmen und damit Diffusionsvorqange zu verfolgen.
    Notes: Thermo-oxidative ageing processes were investigated in films (100 μm thick) made from isotactic polypropylene with different antioxidant concentrations between 0% and 0.1% using isothermal long-term differential thermal analysis (ILDTA). The end of the oven life of polypropylene coincided with the loss of mechanical properties which was confirmed by tensile tests at temperatures far below the crystallite melting range. Already prior to the beginning of autocatalytic decomposition, ILDTA experiments permits conclusions to be drawn on the thermal history of the specimens and statements made regarding the end of thermo-oxidative stability of the polymer, which is accompanied by a deterioration in the mechanical properties.In consequence of the correlation between oxidation time and antioxidant concentration the local antioxidant concentration in sheets or films can be measured by ILDTA. Thus, investigating the diffusion of an antioxidant in polypropylene using ILDTA is possible.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 48
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Die Größenverteilungsfunktion von Dispersionen mit extrem breiter Verteilung (Durchmesserbereich 20 〈 D 〈 2000 nm) kann in der analytischen Ultrazentrifuge (AUC) nicht durch eine Standardmethode, z. B. durch Messung der Trübung τ bei einer einzigen Konzentration, bestimmt werden, weil sich die spezifische Trübung τ/c von sehr kleinen und sehr großen Teilchen zu stark unterscheidet. Um dieses Problem zu lösen, haben wir eine neue AUC-Technik, die sogenannte Coupling-PSD-Technik entwickelt. Dabei werden zwei unterschiedliche Konzentrationen derselben Dispersion gleichzeitig in einem einzigen AUC-Lauf vermessen und zwei korrespondierende Lichtintensitiit-Zeit-Kurven aufgezeichnet. Bei einer niedrigen Standardkonzentration cs werden hauptsachlich die größeren Teilchen erfaßt während bei einer 5 bis 30 mal heheren Konzentration ch vor allem die kleineren Teilchen registriert werden. Die beiden I(t)-Kurven werden mathematisch verkniipft und unter Verwendung des Stokeschen Gesetzes und der Streutheorie von Mie für homogene isotrope Kugeln in die gesuchte breite Verteilungsfunktion umgerechnet. Wir benutzen eine mit einem 8-Zellen-Rotor und einem Multiplexer ausgestattete AUC. Da sehr groBe und sehr kleine Teilchen gleichzeitig in einem einzigen Zentrifugenlauf bestimmt werden, kennen wir nicht mehr wie zuvor eine konstante Rotorgeschwindigkeit N anwenden, sondern miissen diese mit Hilfe eines Geschwindigkeitsprogramms N(t) innerhalb einer Stunde von 0 auf 40000 U/min erhehen.
    Notes: The particle size distribution (PSD) of extremely broad distributed dispersions (diameter range 20 〈 D 〈 2000 nm) is not possible to be measured by analytical ultracentrifuge (AUC) using the standard technique, i.e. measuring turbidity τ at a single concentration c, because the specific turbidity τ/c varies too much between very small and very large particles. To solve this problem we have developed a new AUC technique, the so-called Coupling-PSD-Technique. Here two different concentrations of the same dispersion are measured simultaneously by one single AUC run with two corresponding curves of light intensity I vs. time t being registered. At a low standard concentration cs, mainly the larger particles are detected, while at a concentration ch 5 to 30 times higher mainly the smaller particles are registered. Both I(t)-curves are coupled mathematically and transformed into the requested broad distribution curve employing Stokes' law and Mie's light scattering theory for homogeneous isotropic spheres.We use an AUC together with an 8-cells-rotor and a multiplexer. Because very large and very small particles are to be measured simultaneously in one single run, we can no more apply a constant rotor speed N as before, but by means of a time program N(t) we always have to increase the rotor speed from 0 to 40000 rpm within one hour.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 49
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 162 (1988), S. 135-148 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Die chemische Modifizierung von Polyvinylchlorid (PVC) durch ein Amin verleiht dem Polymeren höhere Reaktivität gegenüber der Pfropfcopolymerisation mit einem Vinylmonomeren. Die Pfropfcopolymerisation von Methylmethacrylat auf mit n-Butylamin modifiziertes PVC wurde thermisch mit Benzoylperoxid (Bz2O2) als Initiator oder photoaktiviert mit Benzophenon (BP) als Photosensibilisator gestartet. Das aus bestimmten Experimenten erhaltene rohe Polymerprodukt wurde durch fraktionierte Fällung in die verschiedenen Bestandteile wie Polymethylmethacrylat (PMMA, Homopolymeres), PVC-g-PMMA (Pfropfcopolymeres) und unverändertes (aminiertes) PVC aufgespalten. Die getrennten Fraktionen wurden mit Hilfe der IR-Spektroskopie und der Thermogravimetrie charakterisiert. Der Mechanismus der Pfropfcopolymerisation von den beiden verschiedenen Systemen wurde erörtert. In beiden Fällen wurden Pfropfausbeuten um 30 - 70%* und Pfropfcopolymerzusammensetzungen, PMMA/PVC (w/w) zwischen 2 und 3 erhalten.
    Notes: Chemical modification of poly(vinyl chloride), PVC, by an amine renders the polymer more reactive towards graft copolymerization with a vinyl monomer. The graft copolymerization of methyl methacrylate (MMA) on PVC modified by treatment with n-butylamine (n-BA) was started thermally at 30° using benzoyl peroxide (Bz2O2) as initiator and under photoactivation at 40° using benzophenone (BP) as photo sensitizer. The gross polymer products from selected experiments were fractionally separated into the constituent polymeric entities viz., poly(methyl methacrylate), PMMA (homopolymer), PVC-g-PMMA (graft copolymer), and unreacted (aminated) PVC following a method of fractional precipitation. The separated fractions were characterized by IR spectroscopy and thermogravimetry. The mechanisms of graft copolymerization for the two different systems have been discussed. In each case, grafting efficiencies of the order of 30-70% and graft copolymers having compositions given as PMMA/PVC (w/w) equal to 2-3 were readily obtained.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 50
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 162 (1988), S. 193-201 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Eine Reihe oberflächensulfonierter, makroporöser Styrol-Divinylbenzol-Copolymerer mit unterschiedlichen Gehalten an SO3H-Gruppen wurden hergestellt. Sowohl von diesen Copolymeren als auch vom nichtsulfonierten Copolymeren wurden Porenstruktur, Oberflächenhydrophilie und -polarität sowie das Sorptionsverhalten gegenüber einigen in Blut vorkommenden Substanzen bestimmt. Der Sorptionsgrad wird umso kleiner, je größer die Oberflächenpolarität ist. Die teilsulfonierten Polymeren könnten eine Anwendung in der Hämoperfusion finden.
    Notes: A series of surface sulphonated macroporous styrene-divinylbenzene (S-DVB) copolymers containing various amounts of  - SO3H groups was obtained. Porous structure, surface hydrophilicity and polarity, and sorption properties of these copolymers as well as those of starting S-DVB resin towards some substances which are present in blood were determined. The sorption degree becomes the smaller the higher is the surface polarity. The partially sulphonated copolymers may find an application in hemoperfusion.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 51
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Der Einfluß einer chemischen Behandlung von dünnen Filmen einer Composit-Membran aus sulfoniertem Polyphenylenoxid wurde untersucht. Über den Einfluß der Konzentration von wáßrigen Lösungen von Formaldehyd, Schwefelsäure, Salzsäure, Phosporsäure, Natriumhydroxid sowie der Behandlungsdauer auf die Trenncharakteristik der inversen Osmose der Composit-Membranen mit einer Ionenaus-tauschkapazität von 2,14 und 2,50 meq/g in verschiedenen Kombinationen wird ausführlich berichtet. Die Ergebnisse zeigen, daß unter den besten chemischen Behandlungsbedingungen eine Erhöhung der Trenncharakteristik der inversen Osmose der sulfonierten Polyphenylenoxid/Polysulfon-Composit-Membran erreicht wird.
    Notes: The effect of chemical treatment on the reverse osmosis (RO) separation characteristics of sulfonated poly(phenylene oxide) (SPPO) thin film composite membranes was investigated. The effects of the concentrations of aqueous solutions of formaldehyde, sulfuric acid, hydrochloric acid, phosphoric acid, sodium hydroxide, and treatment time on the RO separation characteristics of the composite membranes with ion exchange capacity (IEC) of 2.14 and 2.50 meq/g in various combinations are reported in detail. The results indicate some enhancement in RO separation characteristics of the SPPO/polysulfone (PS) composite membrane under the best conditions of the chemical treatment.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 52
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Bei der Herstellung dünner Filme von sulfonierten Polyphenylenoxid/Polysulfon (SPPO/PS)-Composit-Membranen wurde untersucht, daß ein Zusatz von Nitromethan zu einer Lösung von sulfoniertem Polyphenylenoxidnatrium erhöhte Wirkung auf die Trenncharakteristik der inversen Osmose besitzt. Der Einfluß von gamma-Strahlung auf dünne Filme der Composit-Membran unter nassen und trockenen Bedingungen wurde ebenfalls untersucht. Um die maximal mögliche Verbesserung zu erreichen, wurden die Composit-Membranen einer kombinierten chemischen und Gammastrahlen-Behandlung unter nassen und trockenen Bedingungen unterworfen.Die experimentellen Ergebnisse dieser kombinierten Behandlung zeigen, dalß die SPPO/PS Composit-Membran dabei abgebaut wird.
    Notes: The enhancement effect of the addition of nitromethane into the coating solution of sulfonated sodium poly(phenylene oxide) (SPPONa) polymer for the synthesis of sulfonated poly(phenylene oxide)/polysulfone (SPPO/PS) thin film composite membranes on reverse osmosis (RO) separation characteristic was studied. The effect of gamma-ray irradiation on the SPPO/PS thin film composite membranes was also evaluated when the membrane samples were in the wet and dry conditions. The composite membranes were also subjected to a chemical treatment combined with gamma-ray irradiation in both wet and dry conditions in the hope of obtaining the maximum possible enhancement under each treatment. However, the experimental data of this combined treatment indicated the possibility of some degradation of the SPPO/PS composite membranes.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 53
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 163 (1988), S. 37-45 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Mischungen aus Poly(styrol-co-butadien)/Polybutadien, Naturkautschuk/Poly-(ethylen-co-propylen-co-dien und Naturkautschuk/Poly(butadien-co-acrylnitril)) wurden nach drei unterschiedlichen Verfahren compoundiert und Härtungsverhalten sowie Zugfestigkeit und Bruchdehnung der Vulkanisate wurden verglichen.
    Notes: Compounding of styrene-butadiene copolymer/polybutadiene, natural rubber/ethylene-propylene-diene terpolymer and natural rubber/butadiene-acrylonitrile copolymer blends was done in three different ways and their curing behaviour and the tensile properties of the vulcanizates are compared.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 54
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Methylmethacrylat (MMA) wurde mit Hilfe von Cerammoniumnitrat als Initiator auf Stärke gepfropft. Die Pfropfcopolymeren wurden durch selektive Lösungsextraktion in einem Soxhlet-Extraktor isoliert. Der Einfluß von Reaktionszeit, Initiatorkonzentration, Temperatur sowie der Monomer- und Särekonzentration auf die Pfropfausbeute wurde untersucht. Eine erste Studie der Kinetik dieser Pfropfcopolymerisationsreaktion zeigt, daß sie dem üblichen kinetischen Verhalten einer Radikalpolymerisation folgt.
    Notes: Methyl methacrylate (MMA) was grafted onto starch using ceric ammonium nitrate as initiator. The graft copolymers were isolated by selective solvent extraction in a Soxhlet apparatus. The effects of reaction time, initiator concentration, temperature, monomer, and acid concentrations on the graft yields were investigated. A preliminary kinetic study of the graft copolymerisation reactions shows that they follow the conventional kinetic behaviour of free radical polymerisation.
    Additional Material: 5 Tab.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 55
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 163 (1988), S. 47-61 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Durch Verwendung von Phenol-Formaldehyd-Harz mit gepreßten Olivenkenen im Gewichtsverháltnis 20/80 wurden kleine zylindrische Formkörper durch Härtung hergestellt. Diese wurden pyrolysiert und einige Proben mit Wasserdampf aktiviert. Für diese Formkörper und für zwei kommerzielle Aktivkohlen für Laboratoriumsbzw. Industrie-Anwendungen wurden folgende Eigenschaften bestimmt: die spezifische Oberfláche, die Struktur, die Adsorptionseigenschaften sowie die Adsorptionskapazität. Die Ergebnisse zeigen, daß die hergestellten kohlenstoffhaltigen Materialien durch Aktivierung höhere Werte für die untersuchten Eigenschaften ergeben als die nur pyrolysierten Proben und die zwei kommerziellen Aktivkohlen. Es wurde festgestellt, daß die Adsorption des 4-Nitrophenols für alle untersuchten kohlenstoffhaltigen Materialien gemäß der Freundlich-Gleichung stattfindet. Die Raster-Elektronenmikroskopie zeigt, daß die hergestellten kohlenstoffhaltigen Materialien andere Porenarten aufweisen als die kommerziellen Aktivkohlen. Die experimentellen Ergebnisse werden durch die molekularen Dimensionen der zur Adsorption verwendeten Substanzen und den Polarisationseffekt der Substituenten am Benzolring erklärt.
    Notes: Mixtures of phenol-formaldehyde-resin and pressed olive stones in a weight ratio of 20/80 were cured as small cylinders and then pyrolyzed. Some samples were also activated by steam. For these specimens and for two commercial activated carbons of laboratory or industrial uses the specific surface area, the structure, the adsorption properties, and the adsorption capacity were determined. The results indicate that the carbonaceous material produced by activation has greater values for the examined properties in comparison to the only pyrolyzed and the two commercial activated carbons, respectively. It was found that the Freundlich-equation is valid for the adsorption of 4-nitrophenol on all carbonaceous materials examined. The produced carbonaceous materials have different kinds of pores than the commercial activated carbons. The experimental results are explained with regard to the molecular dimensions of the adsorptive substances and the polarization effect of the substituents of the benzene ring.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 56
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 163 (1988), S. 101-114 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Durch Anwendung der nichtlinearen Programmiermethode basierend auf der mittleren harmonischen Näherung wurden aus den Kontaktwinkeldaten die freie Dispersions- und polare, freie Oberflächenenergie, γSVd und γSVp, sowie die kritische, freie Oberflächenenergie, γc, von Polymeren bestimmt. Die Komponenten der freien Oberflächenergie der zu untersuchenden Flüssigkeiten, γLVd und γLVp, die die Bedingungen für den maximalen Wechselwirkungsparameter, Φ, wiedergeben, wurden ebenfalls mit Hilfe dieser Methode bestimmt.
    Notes: The dispersion and polar surface free energy components, γSVd and γSVp, and the critical surface free energy, γc, of polymers were determined from contact angle data by the application of a nonlinear programming method using harmonic mean approximation.The surface free energy components of the probe liquids, γLVd and γLVp, which reflect the conditions of the maximized interaction parameter, Φ, were also simultaneously determined by this method.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 57
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 153 (1987), S. 113-124 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Käufliche Weizenmehlstärke wurde unter Verwendung verschiedener Mengen Schwefelkohlenstoff und Acrylnitril xanthogeniert und cyanethyliert und dann zur Herstellung von modifizierten Stärke-Naturkautschuk-Masterbatches eingesetzt. Weiterhin wurden die Einflüsse untersucht, die die Gleichgewichte der Xanthogenierung und Cyanethylierung gegenseitig aufeinander ausüben. Die Ergebnisse werden auf der Basis definierter Wechselwirkungen zwischen der Xanthogenatgruppe und dem freien Acrylnitril erklärt. Hierbei führen sowohl sterische Faktoren als auch die höhere Elektrophilie des Acrylnitrils zum Zerfall der Xanthogenatgruppe. Daher kann die Cyanethylierung nur noch in einem geringeren Ausmaß erfolgen.
    Notes: Common wheat flour starch was subjected to xanthation followed by cyanoethylation at various levels of carbon disulfide and acrylonitrile to prepare modified starchnatural rubber masterbatches. Mutual influences of the extents of equilibrium xanthation and cyanoethylation on each other have been studied. The results have been explained on the basis of a definite interaction between xanthate group and free acrylonitrile in which both the steric factors and higher electrophilicity of acrylonitrile lead to the decomposition of xanthate groups and reduced the extent of cyanoethylation.
    Additional Material: 8 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 58
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Aus Polychloropren und Polyvinylchlorid wurden Blends in verschiedenen Zusammensetzungen hergestellt und ihre Eigenschaften bestimmt. Die Eigenschaften der Blends zeigen, daß sie Polychloropren in vielen Anwendungen ersetzen können.
    Notes: Blends of polychloroprene rubber and plasticized polyvinylchloride have been prepared in various compositions and their properties evaluated. The properties of the blends show that they can be used to replace polychloroprene in many applications.
    Additional Material: 12 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 59
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: The present paper describes a rheo-optical apparatus consisting of an elongational rheometer (with rotary clamps) and a device to measure birefringence. This equipment was designed to perform homogeneous deformations on polymer melts in the simple elongational mode. Elongational experiments were performed on polyisobutylene samples at room temperature using different strain rates (from \documentclass{article}\pagestyle{empty}\begin{document}$\dot \varepsilon$\end{document} 0.01 s-1 to 1 s-1). In typical experiments homogeneous elongations up to λ ≈ 200 and stresses up to 2 · 106 Pa were achieved. The stress, the birefringence, and the deformation were obtained by measuring the force, the sample thickness, the optical retardation (the frequency of the sampling was 20 Hz) and the width of the sample (the frequency of the sampling was 3 Hz). It was found that the stress-optical coefficient was constant. The homogeneity of the deformations was carefully controlled because inhomogeneities cause serious errors in the measurements of elongational viscosity and birefringence.
    Notes: Es wird über eine rheo-optische Apparatur zur Verstreckung von Polymerschmelzen mit rotierenden Klemmen berichtet, die mit einer Doppelbrechungs-Meßeinrichtung ausgerüstet ist. Mit dieser Einrichtung können einfache Dehnungen an Polymerschmelzen bis zu hohen Verstreckgraden unter homogenen Bedingungen durchgeführt werden. Während des Deformationsvorganges können die Spannung, die Doppelbrechung und die Probendicke mit einer Meßrate von 20 Hz, sowie die Probenbreite mit ca. 3 Hz erfaßt werden.Wir haben Messungen an Polyisobutylen bei Raumtemperatur mit verschiedenen Dehngeschwindigkeiten (0,01 s-1 〈 \documentclass{article}\pagestyle{empty}\begin{document}$\dot \varepsilon$\end{document} 〈 1 s-1) bis zu einem Verstreckgrad von λ ≈ 200 durchgeführt. Dabei wurden Spannungen bis zu 2 · 106 Pa erhalten. Das spannungsoptische Gesetz war bei homogener Versuchsführung stets erfüllt. Es wird gezeigt, daß ohne Kontrolle der Dehngeschwindigkeit und insbesondere bei inhomogener Dehung nicht nur Abweichungen vom spannungsoptischen Gesetz, sondern auch große Fehler bei der Spannungs- bzw. Viskositätsberechnung auftreten. Deshalb wurde großer Wert auf die Prüfung der Homogenität der Dehnung gelegt.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 60
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 153 (1987), S. 187-195 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: The miscibility of various polymethylmethacrylate (PMMA)/polybutylmethacrylate (PBMA)/poly(methylmethacrylate-co-butylmethacrylate)systems has been studied. PMMA and PBMA are immiscible. Methacrylic homopolymers and copolymers are immiscible, too. A one-phase mixture from PMMA and PBMA is only accessible by copolymerization.
    Notes: Die Mischbarkeit von verschiedenen Systemen aus Polymethylmethacrylat (PMMA), Polybutylmethacrylat (PBMA) und Poly(methylmethacrylat-co-butylmethacrylat) (P(MMA-co-BMA)) wurde untersucht. PMMA und PBMA sind miteinander nicht mischbar. Die untersuchten Homopolymeren und entsprechende Methacrylatcopolymere bilden ebenfalls heterogene Systeme. Einphasige Mischungen aus PMMA und PBMA sind nur über Copolymerisation erreichbar.
    Additional Material: 2 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 61
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 163 (1988), S. 169-193 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: The condensation reaction of bisphenol A, melamine, and formaldehyde was investigated by gel permeation chromatography, 13C-NMR-spectroscopy, IR-spectroscopy and elemental analysis. Because of the high reaction rates the condensation could be investigated only in the range of pH 6-10. At pH 6 and 7 the reaction of melamine with formaldehyde is dominating.With increasing pH-value the condensation of bisphenol A with formaldehyde is observed preferably. At pH 10 the condensation results in high molecular products. Cocondensation of melamine and bisphenol A through methylene bridges does not take place. But as a separation of the bisphenol A-formaldehyde condensates from the other condensation products was not possible, the three components may be connected through methylene-ether groups and/or intermolecular hydrogen bridges.
    Notes: Die gemeinsame Kondensation von Bisphenol A, Melamin und Formaldehyd wurde mit Hilfe der Gelpermeationschromatographie, der 13C-NMR-Spektroskopie, IR-Spektroskopie und Elementaranalyse untersucht. Wegen der hohen Kondensationsgeschwindigkeit verläuft die Reaktion in Gegenwart der drei Komponenten nur im Bereich von pH 6-10 kontrollierbar. Bei pH 6 und 7 überwigt die Kondensation zwischen Melamin und Formaldehyd. Mit steigendem pH-Wert tritt die Reaktion von Bisphenol A mit Formaldehyd in den Vordergrund und führt bei pH 10 zu hochmolekularen Kondensationsprodukten.Auf direkte Cokondensation hinweisende Methylenverknüpfungen zwischen der phenolischen Komponente und Melamin konnten nicht nachgewiesen werden. Die Kondensationsprodukte des Melamins bzw. des Bisphenol A mit Formaldehyd lassen sich aber nicht mehr vollständig aus den Reaktionsgemischen der Vorkondensation abtrennen, was dafür spricht, daß die Komponenten über Methylenetherbrücken und/oder intermolekularen Wasserstoffbrücken miteinander verknüpft sind.
    Additional Material: 13 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 62
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Mit Hilfe der 13C-NMR-Spektroskopie wurde die Entwicklung der Oligomerenverteilung während der Polymerisation von 13C-angereichertem Ethylen mit dem löslichen Ziegler-Katalysatorsystem Cp2TiMeCl/AlMe2Cl verfolgt. Zuordnung und quantitative Auswertung aller Signale der verschiedenen wachsenden Ketten werden beschrieben. Die Geschwindigkeiten der Ethylen- und der Cp2 TiMeCl-Abnahme sowie die Bildungsgeschwindigkeit neuer Ketten konnten direkt aus den Spektren ermittelt werden. So läßt sich zum ersten Mal zeigen, daß die Konzentration der Ti-Propyl-und Ti-Pentylspezies in einen stationthen Zustand einlaufen. Dies ermbglicht, die Geschwindigkeitskonstanten der Ethyleninsertion in die Ti-Kohlenstoffbindung von Ti-Me, Ti-Pr und Ti-Pe zu ermitteln. Diese Ergebnisse fiihren zu einem detaillierten Ein-blick in den Ablauf der ersten Insertionsschritte und sind so eine Grundlage fur die mathematische Modellierung. Sie sind aufierdem ein weiterer unabhlngiger Beweis für die Giiltigkeit des dynamischen Modells des Mechanismus der Ethylenpolymerisation mit lbslichen Ziegler-Katalysatoren, nlmlich die Bildung der polymerisationsaktiven Spezies in zwei aufeinanderfolgenden sehr dynamischen Gleichgewichtsreaktionen.
    Notes: The development of the oligomer distribution during the polymerization of 13C-enriched ethylene by the soluble Ziegler catalyst system Cp2 TiMeCl/AlMe2Cl was followed by 13C-NMR spectroscopy. The assignment of the signals from the growing chains is described in full. It is shown that the rate of consumption of ethylene and Cp2 TiMeCl and the rate of formation of new chains can be monitored directly from the spectra. The concentrations of Ti-propyl and Ti-pentyl species during the polymerization were followed spectroscopically; both attain a steady state concentration. The relative rates were determined for the insertion of ethylene in the Ti-carbon bond of Ti-Me, Ti-Pr and Ti-Pe. These results give a detailed insight into the way that the oligomer distribution develops and provide a basis for its computer simulation. They also provide an independent proof that the dynamic model for the mechanism of ethylene polymerization with soluble Ziegler catalysts of the type Cp2 TiRCl/AlRnClm is correct.
    Additional Material: 8 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 63
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 154 (1987), S. 99-110 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Der Einfluß verschiedener Reaktionsbedingungen auf die Bromierung von ataktischem Poly(propylen) (APP) in Tetrachlorkohlenstofflösung wurde untersucht. Mit zunehmender Reaktionszeit steigt der Bromierungsgrad. Auch mit steigender Verdünnung der APP-Lösung nimmt die Bromierungsgeschwindigkeit zu, welche bezüglich der APP-Konzentration die Ordnung 0,66 hat. Dies wird erklärt durch die anfängliche Substitution eines Wasserstoffs am tertiären Kohlenstoffatom. Die folgende H-Abstraktion an den benachbaren sekundären und primären Kohlenstoffatomen ist erleichtert. Die scheinbare Aktivierungsenergie wurde zu 11,9 kcal/mol bestimmt. Die Bromierungsgeschwindigkeit steigt bis zu einem APP : Br2-Molverhältnis von 1 : 1 an, darüber hinaus wird die Geschwindigkeit unabhängig vom Molverhältnis. Die Bromierung scheint folgendermaßen zu verlaufen: Nach anfänglicher Substitution eines tertiären H-Atoms durch freie Bromradikale werden nach und nach auchdie sekundäen und primären H-Atome durch weitergehende Substitution oder durch Addition nach einem Eliminierungsschritt ersetzt. Das IR-Spektrum bestätigt die Anwesenheit von Brom in den Proben.
    Notes: Effects of various reaction conditions on bromination of atactic poly(propylene) (APP) in carbon tetrachloride solution were studied. It was found that with the increase of the reaction time the extent of bromination increases. Also with an increased dilution of APP the rate of bromination increased following a bromination order of 0.66 with respect to APP concentration. This has been ascribed to initial replacement of the hydrogen at the tertiary carbon atoms followed by enhanced ease of abstraction from the neighbouring secondary and primary carbon atoms. The apparent activation energy was found to be 11.9 kcal/mol. The rate of bromination increases with an increase of the APP: Br2 molar ratio up to 1 : 1, beyond which the rate becomes independent of this ratio. Mechanism of bromination appears to be an initial substitution of tertiary H-atoms by bromine radicals followed subsequently by replacement of secondary and primary H-atoms via either progressive substitution or elimination-addition. IR spectra confirm the presence of bromine in the samples.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 64
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 163 (1988), S. 205-207 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Notes: Cyclodextrin membrane-modified electrodes as sensor materials have been prepared by dipping platinum electrodes in the water suspensions of an oriented cyclodextrin polymer, followed by drying the polymer layers on the electrodes. The polymer is obtained by the solid-liquid reaction between the crystal of cyclodextrin inclusion complex and hexamethylene diisocyanate in anisole. The thickness (2 - 80 μm) of the cyclodextrin membrane is satisfactorily controlled by changing the concentration of the water suspension of the polymer. The cyclodextrin membranemodified electrodes show a significant response to p-nitrophenolate in water which is highly in contrast with no measurable response to o- and m-nitrophenolates.
    Additional Material: 1 Tab.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 65
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: In this part properties and efficiency of the developed model1,2 are discussed. A variation of the parameters shows that vigorous effects are caused by the effective aggregation. All calculations show that at low conversion there are little temporal steps between the sequential aggregation steps. In the range of 5% to 20% conversion the velocity of aggregation decreases and the aggregative stability agrees with experiences given in the literature. It is shown that the calculated results are in agreement with the experimental results and therefore the presented model is a suitable possibility to describe the formation of some PVC-morphology properties.
    Notes: In der vorliegenden Arbeit werden die Eigenschaften des früher1,2 entwickelten Modells untersucht und diskutiert. Die Variation der Modellparameter zeigt einen großen Einfluß der Aggregationsprozesse auf die Subkornmorphologie. Bei niedrigen Monomerumsätzen ist das Zeitintervall zwischen zwei aufeinanderfolgenden Aggregationsschritten sehr klein, so daß für das Teilchenwachstum die Geschwindigkeit der Aggregation der Unterstrukturen entscheidend ist. Im Bereich zwischen 5% und 20% Monomerumsatz sinkt die Aggregationsgeschwindigkeit sehr stark, so daß für das Teilchenwachstum zunehmend die Polymerisationsreaktion an Bedeutung gewinnt. Aggregative Stabilität wird nach dem Modell für einen Teilchengrößenbereich erhalten, der sich in Übereinstimmung mit experimentellen Daten aus der Fachliteratur befindet. Die berechneten Teilchengrößen entsprechen ebenfalls den in der Literatur publizierten experimentellen Werten, so daß das Modell eine gute Grundlage für die Beschreibung einiger morphologisch bestimmter Polymereigenschaften bildet.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 66
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 165 (1989), S. 21-34 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Es wurden unidirektionale Verbundwerkstoffe aus Novolakharz mit Kohlenstoff-Fasern gemäß der Prepreg-Methode verarbeitet. Das Novolakharz wurde durch Polymerisation von Phenol mit Formaldehyd (Mol-Verhältnis 1 : 0,82) und Oxalsäure als Katalysator (1,5 Gew.-% von Phenol) hergestellt. Die Härtung des Novolakharzes wurde mit Hexamethylentetramin (Hexa) durchgeführt, während das geeignete Verhältnis durch die IR-Spektroskopie bestimmt wurde.Es wurden Proben aus Novolak/Hexa (Gew.-Verhältnis 14: 1), verstärkt mit kommerziellen Kohlenstoff-Fasern, unter verschiedenen Bedingungen (z. B. verschiedene thermische Programme und verschiedene Verhältnisse von Novolakharz : Kohlenstoff-Fasern) hergestellt. Die mechanischen Eigenschaften der hergestellten Proben (wie Biegefestigkeit, Zugfestigkeit, usw.) wurden bestimmt, und ihre Struktur wurde mit Hilfe der Elektronenmikroskopie untersucht.Mit zunehmendem Volumenverhältnis der Kohlenstoff-Fasern werden nicht nur alle mechanischen Eigenschaften des verstärkten Materials verbessert, sondern auch sein Nutzungsgrad nimmt zu, und die Herstellungsbedingungen üben einen größeren Einfluß aus. Die mit dem gleichen Verhältnis von Kohlenstoff-Fasern (z. B. 15 Vol.-%) hergestellten Proben weisen mit zunehmendem Härtungsgrad des Novolaks verbesserte mechanische Eigenschaften auf. Der Häirtungsgrad des Novolaks während der Anfangsphase (Gel-Zeit) als auch während der Endphase (Nachhärtung) kann mit Hilfe der IR-Spektren des härtenden Novolaks verfolgt werden, während der Härtungsgrad der Zwischenphase nur indirekt aus den Werten der mechanischen Eigenschaften der entsprechenden Proben bestimmt werden kann.Aus der Korrelation zwischen den Herstellungsparametern und den mechanischen Eigenschaften der Proben ergeben sich optimale Bedingungen für die Verarbeitung in der Wärmepresse zur Herstellung von mit Kohlenstoff-Fasern verstärkten Novolakharzen (1. Phase: T1 = 125-145°C, t1 = 20 min - 1 h, ohne Druck; 2. Phase: T2 = 180-195°C, t2 = 40 min, P2 ≃ 1,5 kN /cm2).
    Notes: Unidirectional composite materials of novolac resin with carbon fibers were fabricated according to the prepreg method. Novolac resin was prepared by polymerization of phenol with formaldehyde (mole ratio 1 : 0.82) in the presence of oxalic acid as catalyst (1.5 wt.-% to phenol). The curing of novolac resin was performed with hexamethylenetetramine (hexa), while the appropriate proportion was determined by using the IR-spectroscopy.Specimens of novolac/hexa (weight ratio 14:1) reinforced with carbon fibers commercially available were fabricated under different conditions (e.g. different thermal programs and different proportions of novolac/carbon fibers). The mechanical properties of the fabricated specimens (like flexural strength, tensile strength, etc.) were determined and their structure was examined by scanning electron microscopy.By increasing the volume proportion of carbon fibers, not only all mechanical properties of the composite material were increased, but also their degree of utilization was increased and also the production conditions had greater influence. Concerning the specimens produced by the same proportion of carbon fibers (e.g. 15 vol.-%) their mechanical properties were improved by increasing the curing of novolac. The degree of curing of novolac during the initial phase (gel time) and during the ultimate phase (post-curing) can be followed with the aid of IR-spectra of the cured resin, while the degree of curing for the intermediate phase can be obtained only indirectly from the values of the mechanical properties of the corresponding specimens.From the correlation between the production parameters and the mechanical properties of the samples the optimal conditions for processing of the thermopress for the manufacture of carbon fiber reinforced novolac were concluded (1. phase: T1 = 125-145°C, t1 = 20 min - 1 h, without pressure; 2. phase: T2 = 180-195°C, t2 = 40 min, P2 ≃ 1,5 kN/cm2).
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 67
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 165 (1989), S. 69-78 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: In dieser Arbeit interessieren wir uns für den Einfluß von Konzentration und Temperatur auf den elektrischen Widerstand eines Butyl-Kautschuks (IIR), der mit zwei Typen von Ruß (Hoch-Abrasion-Schmelzofen-Ruß (HAF) und Schnell-Extrusion-Hochofen-Ruß (FEF)) versetzt ist. Ergebnis war, daß die Leitfähigkeit bei niedrigem Rußgehalt hauptsächlich durch thermische Aktivierung der Ladungsträger erreicht wird. Bei mittleren Konzentrationen überwiegt der Tunnel-Mechanismus bei niedriger Temperatur, gefolgt von der thermischen Aktivierung bei relativ hoher Temperatur. Dies gilt für beide Rußarten. Das metallartige Verhalten bei Gemischen mit hoher Rußkonzentration kann sowohl der thermischen Ausdehnung der Tunnelwege zwischen Kohlenstoff-Agglomeraten als auch dem Zusammenbruch der Kohlenstoff-Agglomerate bei steigender Temperatur zugeschrieben werden.
    Notes: In this study we are interested in the effect of concentration and temperature on the electrical resistivity of butyl rubber (IIR) loaded with two types of carbon black, (namely, high abrasion furnace black (HAF), and fast extrusion furnace black (FEF)). It was found that the conductivity at low carbon black concentrations is mainly achieved by thermal activation of carriers. Tunneling mechanism at low termperature followed by thermal activation at relatively high temperature is found to be predominant for moderate concentrations for both carbon blacks. The metal-like behaviour which was observed in highly loaded compounds was attributed to both, the thermal expansion of the tunneling paths between carbon-carbon agglomerates and the breakdown of carbon agglomerates with temperature.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 68
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 165 (1989), S. 79-87 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Die Arbeit beschreibt die Synthese von Halogenderivaten des Phenylglycidylethers und die Möglichkeiten der Verwendung von diesen Komponenten als Flammverzögerer und reaktive Verdünnungsmittel für Epoxidharze.Mit Hilfe der Nelder-Mead-Simplexmethode wurden die besten Reaktionsbedingungen gefunden. Die so hergestellten Produkte zeichnen sich durch eine hohe Qualität aus und wurden mit einem niedermolekularen Epoxidharz gemischt und mit Diaminodiphenylmethan gehärtet.Die Viskosität von Harzgemischen und die Brennbarkeit der gehärteten Systeme wurden untersucht. Mit dem erhöhten Gehalt an Halogen (Chlor oder Brom) steigt die Viskosität, und die Brennbarkeit der Epoxide wird reduziert.
    Notes: This study deals with the synthesis of halogenated derivatives of phenyl glycidyl ether and with possibilities of their use as flame retardants and reactive diluents of epoxy resin.The best reaction conditions optimized by Nelder-Mead simplex method were found. The products of very high quality were prepared. They were mixed with a lowmolecular epoxy resin and cured by diamino diphenyl methane.The viscosity of the resin mixtures and limiting oxygen index of cured systems were determined. It was found that a higher content of halogen, both chlorine and bromine, causes increasing viscosity and reduced flammability of the epoxides.
    Additional Material: 2 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 69
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Durch Messungen von Tg, Tm und Tc (Trübungspunkt) wurden Phasendiagramme der vier verträglichen Polymermischungen von chlorierten isotaktischen Polypropylenen (Chlorgehalt 39,2 (CPP-40) und 49,8 Gew.-% (CPP-50)) mit Poly(ethylen-co-vinylacetat)en (Vinylacetatgehalt 40 (EVA-40) und 45 Gew.-% (EVA-45)) untersucht. Von den vier Mischungspaaren war die Mischung von CPP-50 mit EVA-40 am besten verträglich.
    Notes: By measuring Tg, Tm and Tc (cloud point) phase diagrams for the four miscible blends of chlorinated isotactic polypropylenes (chlorine content 39.2 (CPP-40) and 49.8 wt.-% (CP-50)) with Poly(ethylene-co-vinyl acetate)s (vinyl acetate contents 40 (EVA-40) and 45 wt.-% (EVA-45)) were investigated. The blend of CPP-50 with EVA-40 was the most compatible of the four blend pairs.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 70
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Die Synthese und Charakterisierung von Kationenaustauschmembranen aus PE-PS-DVB-Interpolymeren für die Elektrolyse von Borax-Lösung zur Erzeugung von Borsäure und Natronlauge wurden durchgeführt und mit den Eigenschaften von im Handel erhältlichen Membranen („Nafion 324“ und „Permaplex C-20“) verglichen.
    Notes: The synthesis and the characterization of the PE-PS-DVB interpolymer cationexchange membranes in the electrolysis of borax solutions to produce boric acid and sodium hydroxide simultaneously was carried out. The characterization of the teflon based “Nafion 324” and polystyrene-DVB based “Permaplex C-20” membranes was also performed in the same system for comparison.The DVB contents were varied between 3 - 12% (by wt. in total monomers) and the increase of the cross-links resulted in the decrease of the water contents and ionexchange capacities of the membranes. The PE present in the membrane acted as a barrier for electroosmotic water transport. The membranes with high DVB contents showed better electrolysis performance due to their low water contents and low electroosmotic water transport properties. The use of the interpolymer membrane containing 11.6% DVB resulted in high current efficiency and high sodium cation dynamic transport number and worked satisfactorily at the process conditions of borax electrolysis.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 71
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 165 (1989), S. 125-131 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Aus Rizinusöl und difunktionellen Säuren, wie Oxal-, Malon-, Bernstein-, Glutar-, Adipin-, Suberin- und Sebacinsäure, wurden Prepolyester hergestellt. Diese Prepolyester (PPE) wurden anschließend mit Methylmethacrylat und 1% Ethylenglykoldimethacrylat als Vernetzer interpenetriert. Die Polymerisation wurde radikalisch mit Benzoylperoxid gestartet. Die neuen PPE/Polymethylmethacrylat (PMMA)-interpenetrierenden Netzwerke wurden als Pulver erhalten. Sie wurden durch ihr Löseverhalten, IR-Spektroskopie und ihr thermisches Verhalten charakterisiert.
    Notes: Prepolyesters were obtained from castor oil and dibasic acids, viz oxalic, malonic, succinic, glutaric, adipic, suberic and sebacic acid. These prepolyesters (PPE) were subsequently interpenetrated with methyl methacrylate containing 1% ethylene glycol dimethacrylate as crosslinker by radical polymerization initiated with benzoyl peroxide. The novel PPE poly(methyl methacrylate) PPE/PMMA interpenetrating polymer networks (IPNs) were obtained as powder. They were characterized by solubility behaviour, IR spectral study and thermal behaviour.
    Additional Material: 4 Tab.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 72
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: 2,4-Ionen, ein polymeres quartäres Ammoniumsalz, wurde auf einem makroporösen chlormethylierten Poly(Styrol-co-Divinylbenzol)-Harz (XAD-2) immobilisiert. Der Ionen-Gehalt des Harzes, der durch CHN-Elementaranalyse bestimmt wurde, betrug 50,2 g/kg Harz. Der wichtigste Nebeneffekt des modifizierten Harzes, das Ausbluten des Katalysators 2,4-Ionen, kann durch eine spektrophotometrische Methode, die extrem geringe Konzentraionen an freiem Ionen an der Oberfläche des Harzes messen kann, ermittelt werden.Die Aktivität der immobilisierten 2,4-Ionen/Kobalt(II)-phthalocyanin-tetranatriumsulfonat-Komplexe in bezug auf die oxidative Kupplung von Thiolen ist viel niedriger als im homogenen Fall, aber noch beträchtlich höher als im polymerfreien System. Die beobachtete Abnahme der Reaktionsgeschwindigkeit resultiert nicht aus Behinderungen des Massentransports, sondern vorzugsweise aus den Katalysatoreigenschaften wie z. B. einem sehr niedrigen N+/Co-VerhtUtnis. Die aktiven Zentren scheinen nur in der äußeren Hiille der Harzpartikel vorhanden zu sein.
    Notes: A poly(quaternary ammonium) salt, 2,4-ionene, has been immobilized on a macroporous chloromethylated poly(styrene-divinylbenzene) resin (XAD-2). The ionene content of the resin, determined by CHN elemental analysis, was 50.2 g/kg resin. The most important side effect of the modified resin, catalyst (2,4-ionene) bleeding, can be detected by a spectrophotometric method capable of determining extremely low concentrations of free ionene in the supernatant of the resin.The activity of these immobilized 2,4-ionene/cobalt(II)phthalocyanine-tetrasodiumsulfonate (CoTSPc) complexes towards the oxidative coupling of thiols is much lower than in the homogeneous case, but still considerably higher than for the polymer free system. The observed decrease in reaction rate does not originate from the considerable mass transfer resistances but predominantly from catalyst properties like a very low local N+/Co ratio. The active sites appear to be present in the outer shell of the resin particles only.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 73
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Röntgendiffraktometrische Untersuchungen und DSC-Messungen an Blend-Filmen, die aus Lösungen von PEEK und PES hergestellt wurden, zeigen eine Phasenseparation bei den Filmen, die bei 340°C hergestellt wurden. Das Kristallisationsverhalten von Filmen, die bei 340°C hergestellt, anschließend abgeschreckt und bei 180°C getempert wurden, ist identisch mit dem von PEEK. Filme, die bei 300°C hergestellt wurden, kristallisierten erst durch Tempern bei 250°C. Blockcopolymere, die aus Oligomeren von PEEK und PES erhalten wurden, unterscheiden sich in dieser Hinsicht von Blends der gleichen Zusammensetzung. Die Glastemperatur von Copolymeren mit einem PEEK-Gehalt von mehr als 50% liegt höher als die von PEEK selbst, während der Schmelzpunkt dieser Copolymeren niedriger als der von PEEK ist.
    Notes: Polymer blends of PEEK with PES were prepared by the solution blending method. Copolymers composed of PEEK and PES components were synthesized from these oligomers. The formation conditions exerted an influence over the molecular aggregation and the crystallization behaviors of the blend films and block copolymers which were examined by X-ray diffractometry and DSC analysis. As a result, phase-separation in the blend films was found when the formation temperature was high. The blend films formed at 340°C, quenched and annealed at 180°C, exhibited the same crystallization behavior as those of PEEK. In the case of the blend films formed at 300°C, the annealing of the films at 250°C was required to crystallize the blend films. The Tg of a copolymer with a PEEK component content of more than 50% tends to shift toward a higher temperature than the Tg of PEEK itself, and the Tm of the copolymer toward a lower temperature than that of PEEK ist.
    Additional Material: 16 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 74
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Im Zusammenhang mit dem Studium des Wirkungsmechanismus von industriell hergestellten Antidegradantien vom Typus der N-Phenyl-N′-sek-alkyl-1,Cphenylendiamine wurde die Reaktion von N-Phenyl-1,4-benzochinonimin (I) und 4-Hydroxydiphenylamin (II) mit dem Kohlenstoff-Radikal 1-Cyano-l-methylethyl (R·) studiert. Das Gemisch von I und II reagiert mit R· sehr leicht unter Bildung der Verbindungen III, VI und VIII. I allein reagiert wesentlich langsamer, und das Reaktionsgemisch enthält mehrere Produkte. Neben der Verbindung III wurden auch die Verbindungen IV und VII identifiziert. II allein reagiert bei denselben Bedingungen nicht. Die Verbindung IV bildet die zwei isomeren Strukturen syn und anti. Die Verbindung VIII ist ziemlich unbeständig; aus ihren Umwandlungsprodukten wurde XI isoliert. Bei der Reduktion von IV entsteht die Verbindung V, die ähnlich wie VIII unbeständig ist.
    Notes: The reaction of N-phenyl-1,4-benzoquinoneimine (I)Decoding of abbreviations see p. 103/104. and 4-hydroxydiphenylamine (II) with the carbon centred 1-cyano-1-methylethyl radical (R·) was studied in connection with an investigation of the action mechanism of industrial antidegradants, such as N-phenyl-N′-sec-alkyl-1,4-phenylenediamines. The mixture of I and II reacts very readily with R·, giving rise to III, VI, and VIII. I alone reacts much slowlier, and the reaction mixture contains more products. IV and VII were identified along with III. Under the conditions used, II alone does not react at all. IV exists in two isomeric forms, syn and anti. VIII is very labile; XI was isolated from its transformation products. Reduction of IV gives V, which is labile, similarly to VIII.
    Additional Material: 2 Tab.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 75
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 156 (1988), S. 123-137 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Samples of polyoxymethylene (unstabilized and stabilized with the antiozonants N-isopropyl-N′-phenyl-p-phenylenediamin (IPPD) and bis-(1,2,3,6-tetrahydrobenzaldehyd)pentaerithritylacetal (Vulkazon AFS)) were ozonized under mechanical load in a special climate chamber. Surface damages were determined by IR-spectroscopy and scanning electron microscopy. During the ozonolysis a damaged layer is formed, the thickness of which increases with increasing time of ozonization. During this damaging reaction acetal groups are attacked and oligomers are formed.
    Notes: Proben von unstabilisiertem und mit den Antiozonantien N-Isopropyl-N′-phenyl-p-phenylendiamin (IPPD) und Bis-(1,2,3,6-tetrahydrobenzaldehyd)-pentaerithrityl-acetal (Vulkazon AFS) stabilisiertem Polyoxymethylen wurden unter mechanischer Belastung in einer Klimakammer ozonisiert. Die Schädigungen auf der Oberfläche wurden IR-spektroskopisch und rasterelektronenmikroskopisch untersucht. Während der Ozonisierung von POM bildet sich eine geschädigte Schicht, deren Dicke mit zunehmender Ozonisierungszeit wächst. Hierbei wird das Polymere an den Acetalbindungen angegriffen, wodurch Ketten gespalten werden und Oligomere entstehen.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 76
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 156 (1988), S. 105-121 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Mit Hilfe verschiedener Methoden wurde der Einfluß der Entfernung unterschiedlicher porenbildender Verdünner aus porösen Styrol-Ethylstyrol-Acrylnitril-Divinylbenzol-Copolymeren auf die Netzwerkstruktur untersucht. Der günstigste Weg, den ursprünglichen strukturellen Bau des porösen Netzwerkes zu bewahren, welches in Gegenwart von solvatisierenden Verdünnern erhalten wurde, ist das Entfernen des inerten Mediums mit Methanol. Wenn die Wasserdampfmethode angewendet wird, fin det der sog. Kollapseffekt statt, und die aus solchen Harzen hergestellten Anionenaustauscher adsorbieren weniger Farbstoff im Vergleich zu jenen, die aus Perlen hergestellt worden sind, die mit Methanol behandelt wurden; Grund hierfür ist die durch den Kollaps veränderte Porengröße. Es wurde ebenfalls festgestellt, daß die in Anwesenheit von solvatisierenden Verdünnern (Mischungen aus Quellungs- und Fällmitteln) hergestellten Copolymeren in Methanol sehr gut quellen, obwohl dieses ein Fällungsmittel für Polystyrol ist.
    Notes: The influence of the removal of various diluents, pore forming agents from the porous styrene-ethylstyrene-acrylonitrile-divinylbenzene copolymers on the structure of the matrix was investigated by several methods. The most advantageous pathway to preserve the initial structural edifice of the porous networks performed in the presence of solvating diluents consisted in the removal of the inert media with methanol as it was noticed from the experimental data. If the steam treatment is applied, the collapse effect takes place and the anion exchangers prepared from such matrices exchange/adsorb less dye stuff by comparison with ones formed from beads treated with methanol, because the pore size was changed. It was also noticed that the porous copolymers performed in the presence of the solvating diluents (mixtures of solvatings and precipitants) swell very well in methanol though it is a precipitating medium for the polystyrenic macromolecular chains.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 77
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 156 (1988), S. 139-149 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: An Styrol-Zinkacrylat-Copolymeren wurde die Abhängigkeit der Glasübergangstemperatur von der Aufheizgeschwindigkeit und der Zusammensetzung mit Hilfe der Differential-Scanning-Calorimetrie untersucht. Die Thermogravimetrie wurde benutzt, um die Pyrolyse dieser Copolymeren an Luft bei drei verschiedenen Aufheizge-schwindigkeiten zu untersuchen. Die thermische Zersetzung von Ionomeren ist ein 3-Stufen-Prozeß. Die Reaktionsordnung und Aktivierungsenergie wurde für jede Stufe der Zersetzung bestimmt unter Verwendung eines Computerprogramms, das auf den Methoden von Kissinger, Freeman-Carrol und Ozawa basiert. Es zeigte sich, daß die thermische Stabilität durch die ionischen Gruppen abnimmt.
    Notes: The dependence of glass temperature on the heating rate and the composition for styrene-zinc acrylate copolymers has been investigated by differential scanning calorimetry. Thermogravimetry was used in order to examine these copolymers undergoing pyrolysis in an atmosphere of air at three different heating rates. Thermal decomposition of ionomers is a three-stage process. The orders and activation energies have been determined for each stage of decomposition using the computer programs based on the methods of Kissinger, Freeman-Carrol, and Ozawa. It was found that the heat stability is lowered by the ionic groups.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 78
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 156 (1988), S. 151-162 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Die Pfropfung der hydrophilen Monomeren N-Vinylpyrrolidon, 2-Hydroxyethyl-methacrylat und Acrylamid auf ungesättigte segmentierte Polyurethane in N,N-Dimethylformamid mit 2,2′-Azobisisobutyronitril als Initiator wurde untersucht. Die Pfropfcopolymeren wurden von den Homopolymeren durch selektive Extraktion in Soxhlet-Apparaturen abgetrennt. Die kinetische Untersuchung der Pfropfcopolymerisation zeigte, daß die Reaktionen dem gewöhnlichen kinetischen Verhalten radikalischer Polymerisationen folgen. Die Abhängigkeiten der Pfropfungsgeschwindigkeit von der Initiator- und N-Vinylpyrrolidonkonzentration waren von 0,5 bzw. 1,0 Ordnung. Für 2-Hydroxyethylmethacrylat wurden sie zu jeweils 0,5 und 2,0 gefunden. Die Gesamtaktivierungsenergie der Pfropfcopolymerisation des 2-Hydroxyethylmethacrylats und des N-Vinylpyrrolidons betragen jeweilig 21,81 und 16,28 kJ/mol.
    Notes: Grafting of unsaturated segmented polyurethanes with some hydrophilic monomers such as N-vinyl pyrrolidone, 2-hydroxyethylmethacrylate and acrylamide in N,N-dimethylformamide have been studied using 2,2′-azobisisobutyronitrile (AIBN) as initiator. Graft copolymers were isolated from homopolymers by selected solvent extraction using a Soxhlet apparatus. A kinetic study of graft copolymerization reactions showed that the reactions follow the conventional kinetic behaviour of free radical polymerization. The dependencies of the grafting rate on initiator and N-vinyl pyrrolidone concentrations were of 0.5 and 1.00 order, respectively. However, for the 2-hydroxyethylmethacrylate, the dependencies of the grafting rate on initiator and monomer concentrations were found to be of 0.5 and 2.00 order, respectively. The overall activation energy for the graft copolymerization of the 2-hydroxyethylmethacrylate and N-vinyl pyrrolidone were 21.81 kJ/mol and 16.28 kJ/mol, respectively.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 79
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 156 (1988), S. 179-185 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Notes: Ultra fine particles were impregnated by using a finely porous cellulose gel membrane. The impregnated gel membrane is a green transparent one and looks like a solid solution. Highly dispersed Ni catalysts on carbon were obtained from thermal decomposition of these gel membranes. The particle size is in the range of several nm to a few ten nm. They show interesting catalytic properties for hydrogenation of olefins such as cyclooctadiene.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 80
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Notes: The thermo-oxidation resistance and weatherability of LDPE and HDPE compositions, containing up to 45 wt.% calcium carbonate, are investigated. The thermo-oxidation resistance is investigated by dynamic DTA and natural ageing is carried out in an exposure station in a seaside climate. The change in strength and colour after ageing is determined. The behaviours of filled and unfilled polymers are compared. Empirical equations are given, describing the change in the investigated parameters during natural ageing.
    Additional Material: 8 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 81
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: An Proben aus Polypropylen, die bei sehr unterschiedlichen Einstellungen von Spritzgußmaschinen und Extrudern hergestellt wurden, stellten sich deutliche Abhängigkeiten des Alterungsverhaltens von den thermischen und mechanischen Produktionsparametern ein, die nicht durch unterschiedliche Schmelzetemperaturen bedingt sind. Insbesondere kann ausgesagt werden, daß bei Spritzguß eine hähere Scherbelastung und damit stärkere Orientierungen -eine stärkere Veränderung der Eigenspannungen hervorrufen-einen früheren Glanzabfall und-eine geringere Initialzeit bis zur Rißbildung bewirken.Bei Extrusion fiihrt eine geringere Abkühlgeschwindigkeit und damit ein gröberes Gefüge zu -einer stärkeren Veränderung der Eigenspannungen-einem friiheren und ausgeprägteren Glanzverlust-sowie zu einem früheren Abfall der Reißdehnungen.Unbekannt ist, -ob diese Wirkungen auch bei anderen Thermoplasten als PP auftreten-ob sie auch bei stabilisierten Systemen in relativ gleichem Umfange auftreten-und ob es sich lohnt, die beobachteten Effekte ggf. durch ge zielte Maschineneinstellungen auszunutzen.Auf jeden Fall sollten auf diesem Gebiet weitere Arbeiten durchge-führt werden.
    Notes: Specimens of unmodified polypropylene have been manufactured using extreme adjustings of injection moulding machines and extruders. After artificial weathering, distinct relations of ageing processes to thermal and mechanical production parameters were found, which are not influenced by different melting temperatures. It can be started in particular, that during injection moulding a larger shear stress (resulting in more distinct orientation) results in -a greater change in residual stresses-an earlier gloss reduction-a shorter initial period before cracking.During extrusion a lower cooling rate (resulting in a coarser structure) leads to -a greater change in residual stresses-an earlier and more distinct gloss reduction-an earlier loss of ultimate strain.It remains unknown, whether -these relationships will be similar with other thermoplastic materials than PP-these relationships appear to the same relative extend with stabilized systems-it may be advantageous, to use the observed effects by adjusting the injection moulding and extrusion machines in a special way.It seems to be significant to do more research work in this field.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 82
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 160 (1988), S. 1-15 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Poly(tetramethylenadipat)diol mit einer Molmasse von 2000 wurde bei Temperaturen von 60 und 80°C in Gegenwart von Wasser bzw. 1,4-Butandiol sowie den gebräuchlichsten PUR-Katalysatoren (Dabco und Dibutylzinndilaurat) gelagert und die Solvolyse untersucht. Die Geschwindigkeit der Solvolyse nimmt mit steigender Temperatur deutlich zu. Die Alkoholyse wird durch Dibutylzinndilaurat weitaus stärker katalysiert als durch 1,4-Diazabicyclo[2.2.2]oktan. Die Hydrolyse verläuft langsamer, da vermutlich die Katalysatoren bei diesem Prozeß desaktiviert werden. Die mechanischen Eigenschaften von Polyurethanen, die mit den partiell abgebauten Diolen hergestellt wurden, korrelieren gut mit der Abnahme der Molmasse.
    Notes: Poly(tetramethylene adipate)diol having a molar mass of 2000 was stored at temperatures of 60 and 80°C in the presence of water or 1,4-butanediol and a common PUR-catalyst like 1,4-diazabicyclo [2.2.2]octane (DABCO) or dibutyltindilaurate (DBTL) and the solvolysis was investigated. The rate of solvolysis is low at 60°C except for DBTL and shows a drastic increase at 80°C. In the alcoholysis reaction DBTL is a much more active catalyst than DABCO. The rate of hydrolysis is slower probably because the catalysts are deactivated by the acidic products formed in this process. The mechanical properties of polyurethanes made from the degraded polyols are in good correlation with the decrease in molar mass.
    Additional Material: 11 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 83
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 160 (1988), S. 17-28 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Der Einfluß der Zugabe von Bis(allylphenyl) Typ (TM 120)-Monomeren auf die Eigenschaften von unidirektional mit Carbonfasern verstärkten 4,4′-Bismaleimidodiphenylmethan (BM) - 2,4-Tolylendiamin (A) (1:0,3 Molverhältnis) (BM-A)-Verbundkörpern wird vorgestellt. Das Aushärteverhalten sowie das thermische Verhalten in Luft wurde mit Hilfe der Differentialkalorimetrie (DSC) und der Thermogravimetrie (TGA) untersucht. Die thermische Stabilität nimmt mit ansteigenden Konzentrationen von TM 120 deutlich zu. Demgegenüber steht ein Anstieg der Biegefesigkeit, der interlaminaren Scherfestigkeit sowie der Schlagzähigkeit mit zunehmender Monomerkonzentration. Optimale mechanische Eigenschaften wurden bei etwa 20 Tle./100 Tle. TM 120 erreicht.
    Notes: The paper deals with the effect of addition of bis(allylphenyl) type (TM 120) monomer on the properties of unidirectionally carbon fibre reinforced 4,4′ bismaleimidodi-phenyl methane (BM) - 2,4-tolylene diamine (A) (1:0.3 molar ratio) (BM-A) composites. The curing and thermal behaviour of the blends was investigated by using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) in air atmosphere. A marginal decrease in thermal stability was observed with increasing concentration of TM 120. Flexural, interlaminar, and impact strength of the laminates increased in the presence of this monomer. Optimum mechanical properties were observed at ∼ 20 phr of TM 120.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 84
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: In dieser Arbeit wurden Veränderungen des verschweisßten Rohr- und Fittingmaterials (isotaktisches Polypropylen Homo- bzw. Copolymer PP-R grau pigmentiert) wührend der für die Praxis relevanten Innendruckversuche untersucht.Bei der technischen Verschweißung von Polyolefinen entstehen charakteristische Gefüigezonen im Schweißnahtbereich, welche vom Fßgematerial und den Fngebedingungen beeinflußt werden. In der vorliegenden Untersuchung wurden sowohl die Materialcbergange im Fiigebereich (mit den Methoden - schichtenweise Differentialkalorimetrie, Polarisations- bzw. Elektronenmikroskopie sowie Fluoreszenzspektroskopie mit extrem hoher Ortsauflösung) als auch die Eigenspannungen hinsichtlich ihrer Verlnderung bei Langzeitpriifung im Innendruckzeitstandversuch bei 95°C bis zu einer Prüfzeit von 18.100h untersucht.Die Abbauvorgänge der Makromoleküle bei der Langzeitprüfung der 364 untersuchten Schweißmuster werden in einer gesonderten Arbeit behandelt (1).Durch die Innendruckversuche bei 950 C findet eine Nachkristallisation und eine Gefügevergrijberung sowohl in der Schweißnaht als auch im Gefüge der Schweißpartner statt. Dabei werden die beim Schweißvorgang eingebrachten Orientierungen und Eigenspannungen unter dem Einfluß von Wärme beim Innendruckversuch weitgehend abgebaut. Durch die unter Druckeinwirkung einsetzenden Flieävorgange jedoch werden neue Eigenspannungen eingebracht.Es konnte gezeigt werden, daß bei guter Verschweißung von PP mit PPCO ein kontinuierlicher Übergang (Mischungsbereich) vom Homopolymeren zum Copolymeren auftritt, der auch beim Langzeiteinsatz im Innendruckversuch erhalten bleibt.
    Notes: The present study deals with changes of welded material of pipes and fittings (isotactic polypropylene homo and copolymer PP-R grey pigmented) during the standardized internal pressure tests, which are commonly used for these products.Technical welding of polyolefines causes characteristic structures, which depend on the natural of the welded material and the welding conditions.In this investigation both the transition of material in the welding seam and the changes of internal stresses during internal pressure tests at 95°C until 18.100h test time were examined. The methods we used were Differential calorimetry of think layers, Polarization- and Electron microscopy, Fluorescence spectroscopy with extreme high local resolution.The effects of decomposition of the macromolecules in the welded samples during the internal pressure tests will be described in a separate paper (1).The internal pressure tests at 95O C cause a recrystallization and an increase of the particle size in the structure of the welding seam and in the structure of the welded parts themselves. Under the above described testing conditions the orientations and internal stresses initiated by the welding procedure will relaxe influenced by heat. However the creep effects that occur in the material when exposed to pressure introduce new internal stresses. It could be shown that in perfectly welded parts a continuous transition from PP to PPCO occurs, which did not change after long time application of internal pressure tests.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 85
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 168 (1989), S. 129-134 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Das Reaktionsprodukt eines Cyclohexanon-Formaldehyd-Harzes mit dem Säurechlorid des Radikalinitiators 4,4′-Azo-bis(4-cyanopentansäure) wurde als Initiator für die Styrolpolymerisation eingesetzt, um ein Cyclohexanon-Formaldehyd-Harz/Polystyrol-Copolymeres zu bilden. Das Copolymere zeigte ähnliche Löslichkeit wie Polystyrol.
    Notes: The reaction product of cyclohexanone-formaldehyde resin with an acid chloride of a radical initiator, 4,4′-azo-bis(4-cyano pentanoic acid) was used as initiator for styrene polymerization to form a cyclohexanone-formaldehyde resin/polystyrene copolymer. The copolymer showed similar solubility as polystyrene.
    Additional Material: 1 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 86
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 168 (1989), S. 145-155 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Entgegengesetzte Ladungen wurden durch tertiäre Amin- und Carboxylgruppen in Polyurethan (PU) und Polystyrol (PS) eingeführt, um durch gemeinsame Massepolymerisation ein interpenetrierendes PU/PS Polymernetzwerk (IPN) zu erhalten. Vier IPNs wurden hergestellt: ein Voll-IPN, zwei Semi-IPNs und ein lineares Blend. Die Wirkung der geladenen Gruppen auf die mechanischen Eigenschaften und die Morphologie der vier Polymermischungen wurde untersucht.Es wurde gefunden, daß PU/PS IPNs mit geladenen Gruppen keine Phasenseparation und somit homogene Verteilung aufweisen, was durch elektronenmikroskopische (SEM) Aufnahmen nachgewiesen wurde. Dynamisch-mechanische Messungen zeigen, daß die Übergangspeaks des Verlust-Moduls E″ in die Mitte zwischen den beiden Übergangspeaks der beiden Komponenten ohne geladene Gruppen liegen. Dies ist von der Zunahme des Gehaltes an geladenen Gruppen abhängig. Gleichzeitig nimmt der Speichermodul E′ in einer Stufe ab, was im Gegensatz zu der zweistufigen Abnahme bei Proben ohne Ladungsträger steht.Die Zugfestigkeit nimmt in allen vier Polymermischungen mit der Zunahme an Acrylsäure (AA) in Poly(Styrol-Acrylsäue) PSAA zu, was in dem PU/PSAA Voll-IPN besonders deutlich wird.
    Notes: Opposite charges, namely tertiary amine and carboxyl groups, were introduced into polyurethane (PU) and polystyrene (PS), respectively, to prepare PU/PS interpenetrating polymer networks (IPNs) by means of simultaneous bulk polymerization. Four IPNs were synthesized: a full-IPN, two semi-IPNs and a linear blend. The effect of charge groups on the mechanical properties and morphology of the four polymer alloys was investigated.It is found that the PU/PS IPN which was incorporated with charge groups is free of any phase-separation, and sufficiently uniformly distributed, as can be seen from the corresponding scanning electron microscopy (SEM) photographs. Dynamic mechanical analysis indicates that the transition peak of the loss modulus E″ will move towards the centre between the two transition peaks of both components in the absence of charge groups, as a function of an increase in the contents of the opposite charge groups. Meanwhile the storage modulus E′ will decrease in a single-stage way from the previous two-stage mode.The tensile strength in all the four polymer alloys increased markedly along with an increase in the contents of acrylic acid (AA) in the poly(styrene-acrylic acid) (PSAA), which clearly can be seen for the PU/PSAA full-IPN.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 87
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 168 (1989), S. 157-168 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Pyrolysis behaviour and coke characteristics of different precursors for carbon processing: thermosetting resins (resol, novolak), hydrolytic lignin, pitch, tar as well as their blends were studied using differential thermal analysis (DTA) and X-ray diffraction techniques. The blends novolak-pitch, resol-tar and resol-hydrolytic lignin show a higher coke yield after carbonisation up to 1000°C compared to the corresponding individual substances. A good correlation between the integral procedural decomposition temperature T*A of the investigated precursors and their coke yield is found.
    Notes: Mittels Thermo- und Röntgenstrukturanalyse wird eine vergleichende Untersuchung des Pyrolysevorganges und der Mikrostruktur des aus zwei Gruppen organischer Bindemittel und deren Mischungen gewonnenen Koksrückstandes durchgeführt. Gruppe I umfaßt reine und mit Hydrolyselignin gefüllte Resol- und Novolak-Phenol-Formaldehydharze und Gruppe II Steinkohlenpech und -teer. Es wird festgestellt, daß sich die Mischungen Novolakharz-Pech, Resolharz-Teer und Resolharz-Hydrolyselignin beim Erhitzen nicht wie mechanische Gemische verhalten und eine erhöhte Ausbeute an Koksrückstand liefern. Weiterhin wird gefunden, daß die integrale Endtemperatur der Pyrolyse (T*A) dieser Substanzen als quantitatives Maß für die Ausbeute an Koksrückstand im Anschluß an die Carbonisierung der Proben dienen kann.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 88
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 168 (1989), S. 217-223 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Notes: The paper describes the successful synthesis of silicon containing bismaleimide resin 4,4′-carbo(4,4′-bismaleimido phenoxy)diphenyl silane. The char yield of the bismaleimide resin in N2 atmosphere was found to be 55% at 800°C. Chain extension of bismaleimide with 4,4′-diamino diphenyl sulfone reduced the char yield and thermal stability.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 89
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 160 (1988), S. 67-81 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Es wurden neue Coordinationspolymere mit Schiffschen Basen aus Terephthalal dehyd und S-Benzyldithiocarbazol als Liganden in DMF-Lösung hergestellt. Die erhaltenen Coordinationspolymeren wurden durch Elementaranalyse, magnetische Suszeptibilität, elektronische und IR-Spektroskopie charakterisiert. Die durch Thermogravimetrie bestimmte thermische Stabilität der Coordinationspolymeren nahm in der folgenden Reihenfolge ab: \documentclass{article}\pagestyle{empty}\begin{document}${\rm Zn} \simeq {\rm Fe} 〉 {\rm Co} 〉 {\rm Ni} 〉 {\rm Min} \simeq {\rm Cu}$\end{document} Mn(II)-, Fe(II)-, Co(II)- und Ni(II)-Coordinationspolymere haben eine Oktaederstruktur mit der Koordinationszahl6, während bei den Cu(II)- und Zn(II)-Coordinationspolymeren eine 4-fach koordinierte quadratisch-planare bzw. eine tetraedrische Struktur gefunden wurde. Ligandenfeld- und nephelawetische Parameter wurden aus den Spektren errechnet. Dam wurde die Ligandenfeldtheorie spin-erlaubter Übergänge angewandt, die sich als konsistent mit einer 6-fach koordinierten Struktur für Mn(II)-, Fe(II)-, Co(II)- und Ni(II)-Coordinationspolymere erwies. Die Elementaranalysen ergaben bei allen Coordinationspolymeren ein Ligand: Metall-Verhältnis von 1 : 1 und deuteten bei den Mn(II)-, Fe(II)-, Co(II)- und Ni(II)-Coordinationspolymeren auf am Zentralatom assoziierte Wassermoleküle hin.
    Notes: New Mn(II), Fe(II), Co(II), Ni(II), Cu(II), and Zn(II) coordination polymers of Schiff base ligand derived from terephthalaldehyde and S-benzyldithiocarbazate have been synthesized in DMF media. The coordination polymers have been characterized by their elemental analysis, magnetic susceptibility, and by electronic and infrared spectral measurements.The thermal stability of each polymer was found out by thermogravimetric analysis. The thermal stability of coordination polymers obtained from thermograms has the following order: \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm Zn} \simeq {\rm Fe} 〉 {\rm Co} 〉 {\rm Ni} 〉 {\rm Min} \simeq {\rm Cu}$\end{document} Mn(II), Fe(II), Co(II), and Ni(II) coordination polymers are of a six-coordinated octahedral structure while Cu(II) and Zn(II) coordination polymers are found to be four-coordinated square planar and tetrahedral structure, respectively. The ligand-field and nephelauxetic parameters have been determined from the spectra, using ligand-field theory of spin-allowed transitions which are found consistent with six-coordinate structure for Mn(II), Fe(II), Co(II), and Ni(II) coordination polymers. Elemental analyses indicates a ligand: metal ratio of 1 : 1 in all the coordination polymers and the association of water molecules with central metal atom in case of Mn(II), Fe(II), Co(II), and Ni(II) coordination polymers.
    Additional Material: 4 Tab.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 90
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 160 (1988), S. 91-106 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Emulsionen von aromatischen Polyamidsären (PMPE and PBPPM) in DMF und Methanol wurden benutzt, um gleichmäßige Filme auf Leiteroberflächen durch Elektrophorese abzuscheiden. Die Ausbeute und Qualität der abgeschiedenen Filme hängen von der Art der Polyamidsäre, dem Lösemittel, dem Fällungsmittel, dem oberflächenaktiven Mittel, dem pH-Wert und dem Polymergehalt ab. Die Bedingungen zum Erreichen der höchsten Abscheidungsausbeuten wurden bestimmt.
    Notes: The emulsions of aromatic polyamic acids (PMPE and PBPPM) in DMF and methanol were used to coat uniform films on conductor surfaces by electrodeposition. The deposition yield and quality of the deposited films are dependent on sort of polyamic acid, solvent (DMF), precipitant (MeOH), surfactant (TEA), pH value and solid content. To get maximum deposition yields from PMPE and PBPPM, the best conditions of electrodeposition were required as follows: pH value 5.7 and 5.58, MeOH/DMF weight ratio 3.0 and 2.8, solid content 3.5 and 2.4 wt.-%. Deposition yield was found to obey Faraday's law of electrolysis, and the higher the equivalent weight of the polyamic acid, the higher the coulombic yield.
    Additional Material: 13 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 91
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 160 (1988), S. 107-115 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Ein einfaches Modell von Doppelassoziaten wurde verwendet, um die Doppelschichtsorption von binären Gasgemischen an flexiblen linearen Polymerketten zu beschreiben. Die Isothermengleichung nach diesem Modell ist ein einfaches Produkt der isothermen Gleichung, die die Doppelschichtadsorption von binären Gasgemischen an einer homogenen festen Oberfläche beschreibt und einer Funktion, die die spezifischen Merkmale der Sorption an Polymeren widerspiegelt.
    Notes: A simple model of double associates is used to represent bilayer sorption of binary gas mixtures on a flexible linear chain of a polymer. The isotherm equation derived in terms of this model is a simple product of the isotherm equation describing bilayer adsorption of binary gas mixtures on a homogeneous solid surface and a function reflecting specific features of sorption on polymers.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 92
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 160 (1988), S. 131-140 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: For a polymer system sulfur-styrene containing 10 wt.-% styrene the morphologie depending on the polymerization temperature and time is described. Besides the characteristical orthorhombic phase a monoclinic and a pseudoorthorhombic phase were detected. Moreover amorphous material exists, depending on the polymerisation parameters.
    Notes: Für ein Polymersystem Schwefel-Styrol mit 10% Styrol wird die Abhängigkeit der Morphologie von der Polymerisationstemperatur und -zeit beschrieben. Neben der charakteristischen orthorhombischen Phase wurden röntgenographisch eine monokline und eine pseudoorthorhombische Phase nachgewiesen. Außerdem liegt, abhängig von den Polymerisationsparametern, ein amorpher Anteil vor.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 93
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 160 (1988), S. 117-129 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Für eine anionische Polymerisation mit langsamer Start- und schneller Wachstumsreaktion wurde ein analytischer Ausdruck entwickelt, der es erlaubt, mittlere Molekulargewichte und Molekulargewichtsverteilungen von Polymeren vorauszuberechnen, die in einem halbkontinuierlichen Polymerisationsverfahren bei Zulauf einer verunreinigten Monomerlösung zu einer vorgelegten Initiatolösung entstehen. Die Gültig keit des Modells wurde an der Polymerisation von Isopren mit n-Butyllithium in n-Heptan überprüft. Die beobachteten Unterschiede zwischen theoretischen und experimentellen Werten werden auf die Änderungen in den Geschwindigkeitskonstanten von Start- und Wachstumsreaktion zurückgeführt, die dadurch hervorgerufen werden, daß sich die Polarität der Lösung durch die Anreicherung mit polaren Verbindungen ändert. Weiterhin wird gezeigt, daß bimodale Molekulargewichtsverteilungen entstehen, wenn sich an die halbkontinuierliche Verfahrensweise eine diskontinuierliche zur Erhöhung des Monomerumsatzes anschließt.
    Notes: For anionic polymerization with slow initiation and rapid propagation step analytical expressions are presented to calculate average molecular weights and molecular weight distributions for a semi-batch process, in which a monomer solution contaminated by impurities is fed to an initiator solution in the reactor. The validity of the model was checked for the case of the polymerization of isoprene by n-butyllithium in n-heptane. The differences observed between theoretical and experimental values are explained by the changes in the rate constants of the initiation and the propagation step caused by the change in the polarity of the reaction solution by the continuously fed impurities. Furthermore it is shown that polymers with bimodal molecular weight distributions are formed if the semi-batch procedure is followed by a batch one to increase the monomer conversion.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 94
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 160 (1988), S. 141-154 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Der Wärmehärtungsmechanismus von zu Anstrichen verwendeten Polyethersulfonen wurde unter Verwendung von FTIR/PAS und ESCA untersucht. Als Ergebnis wurde bestätigt, daß der Luftsauerstoff Einfluß auf den Wärmehärtungsmechanismus hat. Das heißt, die Härtung des Polyethersulfonfilms beginnt an der Oberfläche und verläuft entsprechend Reaktion (4) weiter.
    Notes: Thermosetting mechanism of paint-use polyethersulfones was studied by utilizing FTIR/PAS and ESCA. As a result, it was confirmed that the oxygen in the air has an effect on the thermosetting mechanism. That is, the polyethersulfone film were baked from the surface, and proceeded according to reaction (4).
    Additional Material: 8 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 95
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 160 (1988), S. 155-162 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Es wurde der Mechanismus der Reaktion von 4-Ethylphenol mit Zimtaldehyd mittels HET 2DJ 13C-NMR Spektroskopie, 1H-NMR Spektroskopie und GPC untersucht. In der ersten Stufe findet die Addition des 4-Ethylphenols an die Carbonylgruppe und an die Doppelbindung des Zimtaldehyds statt. In der zweiten Stufe reagiert die —CH(OH)-Gruppe mit 4-Ethylphenol und bildet verzweigte Produkte in rötlich gefärbten Harzen mit einem Durchschnittsmolekulargewicht on 600. Die Reaktion verläuft bei Temperaturen über 100°C in stark saurem Medium.
    Notes: The mechanisms of the reaction between 4-ethylphenol and cinnamaldehyde were studied by means of HET 2DJ 13C-NMR spectroscopy, 1H-NMR spectroscopy and GPC. In the first step of the reaction the addition of 4-ethylphenol to carbonyl group and to double bond of cinnamaldehyde takes place. In the second step of the reaction the —CH(OH)-group reacts with 4-ethylphenol to form branched products of red coloured resins with an average molecular weight of 600. The reaction takes place at temperatures above 100°C in strong acid medium.
    Additional Material: 2 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 96
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 160 (1988), S. 163-173 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Die elektrischen und paramagnetischen Eigenschaften des durch eine direkte Methode aus Benzol und Schwefel synthetisierten Poly(phenylensulfid)s wurden untersucht. Die Geichstromdunkelleitfähigkeit dieses Polymeren im nativen Zustand ist 10-10 S/m. Sie nimmt während des Dotierens mit Jod um 8 Größenordnungen zu. Es wurde für undotierte Proben n-Typ- und für die mit Jod dotierten Proben p-Typ-Leitfähigketi beobachtet. Anhand der ESR-Messungen wurden die Zahl der paramagnetischen Zentren und der g-Faktor bestimmt, die entsprechend gleich 0.80 · 1017 Spins/g und 2.0037 für das undotierte Polymere bei Raumtemperatur betragen. Änderungen der Spinkonzentration sowohl für die mit Jod dotierten als auch für die im Temperaturbereich von 513 - 903 K getemperten Proben werden dargestellt. Es wird versucht, die Form der ESR-Linien auf eine quantitative Weise zu diskutieren.
    Notes: Electrical and paramagnetic properties of poly(phenylene sulphide) synthesized by a direct method from benzene and sulphur were investigated. In darkness dc conductivity of the polymer in its pristine state is of the order 10-10 S/m. Upon doping with iodine it increases by 8 orders of magnitude. For undoped samples the n-type conductivity and for those doped with iodine the p-type conductivity was observed. On the basis of ESR experiments the number of spins and g-value were determined, which for undoped polymer at room temperature are equal to 0.80 · 1017 spins/g and 2.0037, respectively. Next, the changes in spin concentration both for the iodine doped samples and these annealed within the temperature range 513 - 903 K were described. An attempt to discuss the ESR lineshape in a quantitative way was also made.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 97
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 160 (1988), S. 175-186 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: 3-Carboxy-4-hydroxyacetophenon (CHAP) wurde in verschiedenen Mengenverhältnissen mit Formaldehyd unter Verwendung von Alkali als Katalysator polykondensiert. Die erhaltenen Polykondensate (CHAP-F) wurden durch Elementaranalyse, IR-Spektroskopie, Bestimmung des Zahlenmittels der Molmasse (M̄n), Thermogravimetrie und Bestimmung der Grenzviskosität charakterisiert. Es wurden polymere Metallchelate mit Cu2+ -, Fe3+ -, Co2+ -, Ni2+ - und UO2+2 -Ionen hergestellt und charakterisiert. Mit Hilfe der Batch-Austauschmethode wurden Ionenaustauschereigenschaften eines CHAP-F Harzes gegen Fe3+ - Cu2+ - und Ni2+ -Ionen bestimmt.
    Notes: 3-Carboxy-4-hydroxyacetophenone (CHAP) was polycondensed with various proportions of formaldehyde using alcoholic alkali as catalyst. The resin samples, designated as CHAP-F, have been characterized by elemental analyses and IR spectroscopy, by estimation of their number average molecular weights (M̄n), by measurement of intrinsic viscosity, and by TGA. Polymeric metal chelates of one CHAP-F sample with Cu2+, Fe3+, Co2+, Ni2+, and UO22+ ions have been prepared and characterized.Ion-exchanging properties of one CHAP-F resin sample for Fe3+, Cu2+, and Ni2+ metal ions are studied by the application of the batch-equilibration method.
    Additional Material: 5 Tab.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 98
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 160 (1988), S. 187-192 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: Die Reaktionsenthalpien für die Addition von Hydroxidanion an substituierte Phenylisocyanate wurden mit MNDO berechnet. Die erhaltenen Werte stimmen sehr gut mit den Reaktionsgeschwindigkeiten der Addition von 2-Ethylhexanol an Phenylisocyanate überein. Dies ermöglicht eine Abschätzung der Reaktionsgeschwindigkeiten für nucleophile Additionen innerhalb vernünftiger Grenzen, ohne daß experimentelle Arbeiten durchgeführt werden müssen.
    Notes: The enthalpies for the addition of hydroxide anion to substituted phenylisocyanates have been calculated with MNDO. The results obtained correlate well with the rates of addition of 2-ethylhexanol to phenylisocyanates. This allows us to estimate the rates for nucleophilic addition within reasonable limits without the need for experiments.
    Additional Material: 2 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 99
    Electronic Resource
    Electronic Resource
    Weinheim : Wiley-Blackwell
    Angewandte Makromolekulare Chemie 160 (1988), S. 211-211 
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 100
    ISSN: 0003-3146
    Keywords: Chemistry ; Polymer and Materials Science
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Physics
    Description / Table of Contents: As hard blocks in polyether block amides, polyamides are used whose length is intensively regulated by dicarboxylic acids. Since, with regard to melting and crystallization behaviour, this acid constitutes an interfering structural unit in the chain, and in the case of a completely converted product each chain contains one acid molecule, it is essential to know where in the chain incorporation will occur. As opposed to monofunctional chain regulators which always form a chain end, a bifunctional chain regulator can a priori also be randomly incorporated into the inner part of the chain. This leads to a far greater interference than occurs if the chain regulator molecule and the chain end, which acts as an interfering unit in any case, coincide with each other.By means of adipic acid-regulated oligoamides based on lauryl lactam, the incorporation of the chain regulator was examined by NMR spectroscopy and compared with model calculations. This resulted in a close match only if it was presupposed that the incorporation was carried out randomly with the same degree of probability at any point whatsoever between two lauryl lactam structural units or at the chain end.Further calculations illustrate the effects of the incorporation of the chain regulator on the size of the amorphous portion.
    Notes: Als Hartblöcke in Polyetherblockamiden werden durch Dicarbonsäuren stark geregelte Polyamide eingesetzt. Da die Säure in Hinblick auf das Schmelz- und Kristallisationsverhalten einen Störbaustein in der Kette darstellt und bei einem ausgeregelten Produkt jede Kette ein Säuremolekül enthält, ist es von Bedeutung zu wissen, wo in der Kette der Einbau erfolgt. Anders als bei monofunktionellen Reglern, wo der Regler stets ein Kettenende bildet, kann ein bifunktioneller Regler a priori auch statistisch im Inneren der Kette eingebaut werden. Dies führt zu einer viel stärkeren Störung, als wenn das Reglermolekül und das sowieso als Störstelle wirkende Kettenende zusammenfallen. Anhand adipinsäuregeregelter Oligoamide auf Basis von Laurinlactam wird kernresonanzspektroskopisch der Einbau des Reglers untersucht und mit Rechnungen verglichen. Es ergibt sich nur dann gute Übereinstimmung, wenn vorausgesetzt wird, daß der Einbau statistisch erfolgt und dabei mit gleicher Wahrscheinlichkeit für jede beliebige Stelle zwischen zwei Laurinlactambausteinen oder am Kettenende abläuft. Weitere Rechnungen verdeutlichen den Einfluß des Reglereinbaus auf die Größe des amorphen Anteils.
    Additional Material: 6 Tab.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...