ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • AERODYNAMICS  (594)
  • 1980-1984  (366)
  • 1970-1974  (228)
  • 1981  (366)
  • 1971  (228)
  • 1
    Publication Date: 2011-10-14
    Description: The test capabilities of the Stability Wind Tunnel of the Virginia Polytechnic Institute and State University are described, and calibrations for curved and rolling flow techniques are given. Oscillatory snaking tests to determine pure yawing derivatives are considered. Representative aerodynamic data obtained for a current fighter configuration using the curved and rolling flow techniques are presented. The application of dynamic derivatives obtained in such tests to the analysis of airplane motions in general, and to high angle of attack flight conditions in particular, is discussed.
    Keywords: AERODYNAMICS
    Type: AGARD Dyn. Stability Parameters; 13 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 2
    Publication Date: 2005-11-27
    Description: Applications of supercritical airfoils to transport aircraft designs
    Keywords: AERODYNAMICS
    Type: NASA AIRCRAFT SAFETY AND OPERATING PROBL., VOL. 1 1971; P 165-176
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 3
    Publication Date: 2005-11-27
    Description: Flight tests for evaluating effect of wing-tip vortex wake generated by large jet transports on smaller aircraft
    Keywords: AERODYNAMICS
    Type: NASA AIRCRAFT SAFETY AND OPERATING PROBL., VOL. 1 1971; P 115-126
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 4
    Publication Date: 2005-11-27
    Description: Effect of wing-tip vortex wakes generated by large jet transport aircraft on smaller airplanes
    Keywords: AERODYNAMICS
    Type: NASA AIRCRAFT SAFETY AND OPERATING PROBL., VOL. 1 1971; P 101-113
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 5
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2005-11-27
    Description: Alleviation of lateral and longitudinal gust effects on aircraft
    Keywords: AERODYNAMICS
    Type: PERFORMANCE AND DYN. OF AEROSPACE VEHICLES 1971; P 505-553
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 6
    Publication Date: 2005-11-27
    Description: Effects of aeroelasticity on static longitudinal aerodynamic derivatives
    Keywords: AERODYNAMICS
    Type: PERFORMANCE AND DYN. OF AEROSPACE VEHICLES 1971; P 375-438
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 7
    Publication Date: 2005-11-27
    Description: Minimizing drag and increasing performance of optimum shapes at hypersonic flight
    Keywords: AERODYNAMICS
    Type: PERFORMANCE AND DYN. OF AEROSPACE VEHICLES 1971; P 103-174
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 8
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2005-11-27
    Description: Least squares method and iteration technique for obtaining aerodynamic stability derivatives
    Keywords: AERODYNAMICS
    Type: PERFORMANCE AND DYN. OF AEROSPACE VEHICLES 1971; P 71-101
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 9
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2009-11-16
    Description: Aeroelasticity and unsteady flow problems of aircraft
    Keywords: AERODYNAMICS
    Type: PERFORMANCE AND DYN. OF AEROSPACE VEHICLES 1971; P 289-374
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 10
    Publication Date: 2006-02-14
    Description: The two body problem was analyzed with a specific drag model. The model treats drag as a force proportional to the vector velocity and inversely proportional to the distance to the center of attraction. The solution is expressed in terms of known functions and is of a simple and compact form. The time of flight is expressed as a quadrature in the true anomaly. The results are: (1) development of a vector differential equation which allows analysis of an infinite number of gravitational and drag models; and (2) obtaining the solution of a linear differential equation using the inverse method of laplace transforms.
    Keywords: AERODYNAMICS
    Type: Houston Univ. The 1981 NASA ASEE Summer Fac. Fellowship Program, Vol. 2; 22 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 11
    Publication Date: 2006-02-14
    Description: To determine the low speed performance characteristics of a representative high aspect ratio supercritical wing, two low speed jet transport models were fabricated. A 12-ft. span model was used for low Reynolds number tests in the Langley 4- by 7-Meter Tunnel and the second, a 7.5-ft. span model, was used for high Reynolds number tests in the Ames 12-foot Pressure Tunnel. A brief summary of the results of the tests of these two models is presented and comparisons are made between the data obtained on these two models and other similar models. Follow-on two and three dimensional research efforts related to the EET high-lift configurations are also presented and discussed.
    Keywords: AERODYNAMICS
    Type: Advan. Aerodyn.: Selected NASA Res.; p 55-77
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 12
    Publication Date: 2006-02-14
    Description: Highlight results are presented from subsonic and transonic pressure measurement studies conducted in the Langley Transonic Dynamics Tunnel on a supercritical wing model representative of an energy efficient transport design. Steady- and unsteady-pressure data were acquired on the upper and lower wing surface at an off-design Mach number of 0.60 and at the design Mach number of 0.78, for a Reynolds number of 2.2 x 10(6) (based on the wing average chord). The model configuration consisted of a sidewall-Mounted half-body fuselage and a semi-span wing with an aspect ratio of 10.76, a leading-edge sweepback angle of 28.8 degrees, and supercritical airfoil sections. The wing is instrumented with 252 static pressure orifices and 164 dynamic pressure gages. Model test variables included wing angle of attack, control-surface mean deflection angle, control-surface oscillating deflection angle and frequency, and phasing between oscillating leading-edge and trailing-edge controls when used together.
    Keywords: AERODYNAMICS
    Type: Advan. Aerodyn.: Selected NASA Res.; p 21-36
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 13
    Publication Date: 2011-08-16
    Description: Windward injection into supersonic stream at angle of attack, minimizing vortex disruption
    Keywords: AERODYNAMICS
    Type: ; 394-398. (
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 14
    Publication Date: 2011-08-16
    Description: Viscous slipstream flow downstream of triple shock wave intersection in supersonic diffuser air flow, using Pitot and static pressure probe measurements
    Keywords: AERODYNAMICS
    Type: ; - ASTRONOMY 1969- TE
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 15
    Publication Date: 2011-08-16
    Description: Results of aerodynamic balance and pressure measurements carried out in a hypersonic gun tunnel (at a free-stream Mach number of 8.2 and a Reynolds number of 800,000) on delta wings having sharp leading edges swept at 70 and 76 deg. The experimental force and pressure coefficients and shock angles are discussed in relation to simple prediction methods. Some transition data are also included.
    Keywords: AERODYNAMICS
    Type: Aeronautical Society of India; vol. 23
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 16
    Publication Date: 2011-08-16
    Description: Modified asymptotic perturbation expansion method application to free flow rotation effect on boundary layer for hypersonic flow about blunt body
    Keywords: AERODYNAMICS
    Type: ; 35 (
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 17
    Publication Date: 2011-08-16
    Description: Axisymmetric inlet design for turboramjet powered hypersonic cruise vehicle, examining effects of spillage and cowl drags on air flow characteristics
    Keywords: AERODYNAMICS
    Type: ; UG REVUE(
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 18
    Publication Date: 2011-08-16
    Description: Small curvature radius/throat radius ratio supersonic nozzles mass flow rate coefficients at high Reynolds numbers, appraising isentropic flow prediction methods
    Keywords: AERODYNAMICS
    Type: ; VUE SCIENTIFIQUE ET
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 19
    Publication Date: 2011-08-16
    Description: Maximum stagnation temperature on swept wing leading edge for equilibrium glide entry of space shuttle
    Keywords: AERODYNAMICS
    Type: ; 63 (
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 20
    Publication Date: 2011-08-16
    Description: Shock tunnel drag measurements on sharp slender cones in near free molecule hypersonic flow in air and He
    Keywords: AERODYNAMICS
    Type: ; YAL SOCIETY (
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 21
    Publication Date: 2011-08-16
    Description: Vortex-induced heating alleviation to lee side of slender wings in hypersonic flow by contouring leading edge planform
    Keywords: AERODYNAMICS
    Type: ; YAL SOCIETY (
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 22
    Publication Date: 2011-08-16
    Description: Hypersonic theoretical/experimental correlations of aerodynamic characteristics for space shuttle design
    Keywords: AERODYNAMICS
    Type: NASA, WASHINGTON NASA SPACE SHUTTLE TECHNOL. CONF., VOL. 1 APR. 1971; P 455-492
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 23
    Publication Date: 2011-08-16
    Description: Reynolds number simulation requirements for subsonic wind tunnel tests of space shuttle configurations
    Keywords: AERODYNAMICS
    Type: NASA, WASHINGTON NASA SPACE SHUTTLE TECHNOL. CONF., VOL. 1 APR. 1971; P 423-453
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 24
    Publication Date: 2011-08-16
    Description: Aerodynamic characteristics of delta wing space shuttle configurations
    Keywords: AERODYNAMICS
    Type: NASA SPACE SHUTTLE TECHNOL. CONF., VOL. 1 APR. 1971; P 311-373
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 25
    Publication Date: 2011-08-16
    Description: Approximate solution for position and strength of shock waves about cones in steady supersonic flow
    Keywords: AERODYNAMICS
    Type: ; ADEMIE DES SCIENCES
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 26
    Publication Date: 2011-08-16
    Description: Description of additional results indicating that a unique relationship exists between rms sound pressure level and transition Reynolds number, provided all other parameters are held nearly invariant. The results illustrate the different levels of the transition Reynolds numbers obtained in six facilities with nearly invariant laminar boundary layers on the different models (at the same local unit Reynolds number) and indicate that some facility characteristic has a strong influence on the transition Reynolds numbers.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 9; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 27
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-18
    Description: Promising current theoretical and simulational developments in the field of leading edge vortex-generating delta, arrow ogival wings are reported, along with the history of theory and experiment leading to them. The effects of wing slenderness, leading edge nose radius, Mach number and incidence variations, and planform on the onset of vortex generation and redistribution of aerodynamic loads are considered. The range of design possibilities in this field are consequential for the future development of strategic aircraft, supersonic transports and commercial cargo aircraft which will possess low-speed, high-lift capability by virtue of leading edge vortex generation and control without recourse to heavy and expensive leading edge high-lift devices and compound airfoils. Attention is given to interactive graphics simulation devices recently developed.
    Keywords: AERODYNAMICS
    Type: Astronautics and Aeronautics; 19; May 1981
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 28
    Publication Date: 2011-08-18
    Description: Wind tunnel test results are presented for four axisymmetric bluff body configurations in order to determine their effect on form and pressure drag. It was found that drag reductions on the order of 40% are obtainable with an afterbody incorporating four longitudinal 'V' grooves. Although this effect may be due to the functioning of the grooves as longitudinal, continuous vortex generators, it is concluded that further research is needed to elucidate the physical basis of the test results. Optimization of the effect will be useful in base drag reduction for such vehicles as automobiles and cargo aircraft with sharply upswept afterbodies.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 19; Apr. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 29
    Publication Date: 2011-08-18
    Description: A fundamental analysis of two-dimensional supersonic boundary layer flow, both laminar and turbulent, is presented for a wide range of normal and nonnormal mass-transfer velocities. The analysis is based on the numerical solution of the Navier-Stokes equations, and results are compared with available theoretical and experimental data. Certain cases of practical importance, for which results are not presently available, are referred to.
    Keywords: AERODYNAMICS
    Type: Computer Methods in Applied Mechanics and Engineering; 25; Jan. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 30
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-18
    Description: Interactions between theoretical aerodynamics and the NTF are discussed. The development and validation of computational fluid dynamics computer codes, the determination of Reynolds number scaling laws, and extension of the data bases of entrainment type turbulence models to include high Reynolds number data are recommended areas of study. The major benefit theoretical aerodynamics could have on the NTF is in the quantitative description of wind tunnel wall interference effects.
    Keywords: AERODYNAMICS
    Type: High Reynolds Number Res. - 1980; p 277-286
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 31
    Publication Date: 2011-08-18
    Description: Requirements of entry vehicle design requiring high Reynolds number wind tunnel testing are discussed. The space shuttle orbiter, development of future space transportation systems, and planetary entry data analysis are considered.
    Keywords: AERODYNAMICS
    Type: High Reynolds Number Res. - 1980; p 265-274
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 32
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-18
    Description: The status of recommended areas of study for the NTF are reviewed. Transonic and control surface unsteady aerodynamics, and buffet onset and loads are considered. Testing of dynamically scaled flutter models is discussed.
    Keywords: AERODYNAMICS
    Type: High Reynolds Number Res. - 1980; p 237-246
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 33
    Publication Date: 2011-08-18
    Description: The model building, development, and testing experience gained during 8 years of operation of the 0.3-m Transonic Cryogenic Tunnel (TCT) is summarized. The summary is divided into four portions: (1) models tested in the 0.3-m TCT's original octagonal test section; (2) models tested in the present two dimensional test section; (3) models tested as a part of tunnel calibration and the development of advanced technology airfoils; and (4) development of a new way to construct two dimensional airfoil models. Design requirements imposed on the models by high Reynolds number testing at cryogenic temperatures are reviewed.
    Keywords: AERODYNAMICS
    Type: High Reynolds Number Res. - 1980; p 53-73
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 34
    Publication Date: 2011-08-18
    Description: A series of wind tunnel tests were run on 60 and 75 deg sweep delta wings to examine the effectiveness of leading-edge vortex flaps. Tests results showed that leading-edge vortex flaps are effective in giving large increases in lift-to-drag ratio and decreases in drag over a wide range of angle of attack. Tests on inverted flaps on the 60 deg delta wing showed substantial increases in lift and drag and may indicate a possibility of using inverted flaps on delta wings in the landing portion of flight. The 60 deg data were compared with that for a 75 deg sweep delta wing confirming that leading-edge vortex flap effectiveness is stronger as sweep is increased. Pitching moment effects due to vortex flaps use were also examined.
    Keywords: AERODYNAMICS
    Type: Journal of Aircraft; 18; Apr. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 35
    Publication Date: 2011-08-18
    Description: Results of hot-wire measurements in an incompressible partially confined jet issuing from an array of rectangular nozzles, equally spaced with their small dimensions aligned are presented. The quantities measured include mean velocity and the Reynolds stress in the two central planes of the jet at stations covering up to 115 widths (small dimension of a nozzle) downstream of the nozzle exit. For downstream distances greater than 60 widths, the flowfield is observed to be nearly homogenous and the turbulence appears to be quite similar to that of a grid generated turbulence.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 19; Mar. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 36
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-18
    Description: Newtonian flow theory for unsteady flow at very high Mach numbers is completed by the addition of a centrifugal force correction to the impact pressures. The correction term is the unsteady counterpart of Busemann's centrifugal force correction to impact pressures in steady flow. For airfoils of arbitary shape, exact formulas for the unsteady pressure and stiffness and damping-in-pitch derivatives are obtained in closed form, which require only numerical quadratures of terms involving the airfoil shape. They are applicable to airfoils of arbitrary thickness having sharp or blunt leading edges. For wedges and thin airfoils these formulas are greatly simplified, and it is proved that the pitching motions of thin airfoils of convex shape and of wedges of arbitrary thickness are always dynamically stable according to Newton-Busemann theory. Leading-edge bluntness is shown to have a favorable effect on the dynamic stability; on the other hand, airfoils of concave shape tend toward dynamic instability over a range of axis positions if the surface curvature exceeds a certain limit. As a byproduct, it is also shown that a pressure formula recently given by Barron and Mandl for unsteady Newtonian flow over a pitching power-law shaped airfoil is erroneous and that their conclusion regarding the effect of pivot position on the dynamic stability is misleading.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 19; Mar. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 37
    Publication Date: 2011-08-18
    Description: Vortex phenomena encountered in an investigation of the streamwise development of the three-dimensional wake region behind the tip of a three-dimensional wedge model are reported. Pressure profiles were measured by pitot probes downstream of a tip with a nearly constant surface pressure level and a nearly continuous surface curvature in a blowdown air tunnel operating at Mach 6. Rather than the simple three-dimensional quasi-parallel shear flow expected, the measurements indicated the presence of a flow with large deficits in longitudinal pitot pressure, which are usually associated with the core region of quasi-steady longitudinal vortices. Vapor screen flow visualizations also support the presence of longitudinal vortices located primarily in the tip region and evidently forming in the vicinity of the wake neck. An increase in overall wake thickness by 100% is also observed. The origin of the vortices as quasi-steady Taylor-Gortler vortices generated in the concavely curved shear layer near the wake neck is considered. It is pointed out that the existence of longitudinal vortexes suggests that three-dimensional turbulence modeling may be much more difficult than previously supposed.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 19; Mar. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 38
    Publication Date: 2011-08-18
    Description: Tests that can exploit the capability of the NTF and the transonic cryogenic tunnel, or lead to improvements that could enhance testing in the NTF are discussed. Shock induced oscillation, supersonic single degree control surface flutter, and transonic flutter speed as a function of the Reynolds number are considered. Honeycombs versus screens to smooth the tunnel flow and a rapid tunnel dynamic pressure reducer are recommended to improve tunnel performance.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Research Center High Reynolds Number Res. - 1980; p 153-161
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 39
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-18
    Description: Basic calibration of the tunnel prior to conducting any tests, the areas requiring wind tunnel/flight test correlation for validating the NTF, and recommendations for achieving validation of the NTF are discussed.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Research Center High Reynolds Number Res. - 1980; p 249-262
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 40
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-18
    Description: The NASA Langley high lift technology program is reviewed and elements of the program which are considered Reynolds number sensitive are discussed. The Energy Efficient Transport (EET) and Supersonic Cruise Research (SCR) models proposed for high lift studies in the National Transonic Facility (NTF) are described. Recommendations regarding the NTF facility and test techniques are presented.
    Keywords: AERODYNAMICS
    Type: High Reynolds Number Res. - 1980; p 197-213
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 41
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-18
    Description: The interference technology incorporated into the NTF design (hardware) and the emerging transonic wall interference assessment correction procedures (software) to be employed when the NTF becomes operational was reviewed. It is anticipated that the early experiments will provide data relevant to wall interference effects.
    Keywords: AERODYNAMICS
    Type: High Reynolds Number Res. - 1980; p 123-241
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 42
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-18
    Description: Static aerodynamic research related to aircraft configurations in their cruise or combat modes is discussed. Subsonic transport aircraft, transonic tactical aircraft, and slender wing aircraft are considered. The status and plans of Langley's NTF configuration research program are reviewed. Recommendations for near term configuration research are made.
    Keywords: AERODYNAMICS
    Type: High Reynolds Number Res. - 1980; p 217-234
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 43
    Publication Date: 2011-08-18
    Description: The National Transonic Facility (NTF) capability to match the full scale Reynolds numbers of all but the largest airplanes is discussed. Conversion factors to enable calculation of Sl-unit equivalents for all U.S. units are listed. Using data from several facilities, analytic methods, and flight test data, a competetive aircraft in the relatively low Reynolds number was developed. The NTF offers the capability to obtain data at full scale Reynolds numbers in the cruise condition for most of the products, and will be much closer than previous tunnels to full scale Reynolds number for the operating envelopes. It is primarily on the operating envelope that Reynolds number effects are most important and least predictable.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Research Center High Reynolds Number Res. - 1980; p 143-148
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 44
    Publication Date: 2011-08-18
    Description: The paper presents numerical solutions of the full potential equation in conservative form. The iteration scheme used is a fully implicit approximate factorization technique and provides a significant improvement in convergence speed relative to standard successive line overrelaxation algorithms. The spatial differencing algorithm is centrally differenced in both subsonic and supersonic regions to maintain stability. This effectively approximates rotated differencing, thereby greatly improving the reliability of the algorithm.
    Keywords: AERODYNAMICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 45
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-18
    Description: The ILLIAC IV computer has been programmed with an implicit, finite-difference code for solving the thin layer compressible Navier-Stokes equation. Results presented for the case of the buffet boundaries of a conventional and a supercritical airfoil section at high Reynolds numbers are found to be in agreement with experimentally determined buffet boundaries, especially at the higher freestream Mach numbers and lower lift coefficients where the onset of unsteady flows is associated with shock wave-induced boundary layer separation.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 19; Nov. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 46
    Publication Date: 2011-08-18
    Description: A clarification is presented on recent work concerning the application of unsteady airfoil theory to rotary wings. The application of this theory may be seen as consisting of four steps: (1) the selection of an appropriate unsteady airfoil theory; (2) the resolution of that velocity which is the resultant of aerodynamic and dynamic velocities at a point on the elastic axis into radial, tangential and perpendicular components, and the angular velocity of a blade section about the deformed axis; (3) the expression of lift and pitching moments in terms of the three components; and (4) the derivation of explicit expressions for the components in terms of flight velocity, induced flow, rotor rotational speed, blade motion variables, etc.
    Keywords: AERODYNAMICS
    Type: Journal of Aircraft; 18; July 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 47
    Publication Date: 2011-08-18
    Description: It is now generally agreed that an external disturbance field, such as an incident acoustic wave, can effectively couple to instabilities of a flow past a trailing edge. One purpose of the present paper is to show that there are situations where a similar coupling can occur at a leading edge. The process is analyzed and the effects of experimentally controllable parameters are assessed. It is important to account for such phenomena when evaluating the effect of external disturbances on transition.
    Keywords: AERODYNAMICS
    Type: Journal of Fluid Mechanics; 104; Mar. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 48
    Publication Date: 2011-08-18
    Description: A discrete vortex method was used to analyze the separated non-steady flow about a cambered airfoil. The foil flow modelling is based on the thin lifting-surface approach, where the chordwise location of the separation point is assumed to be known from experiments or flow-visualization data. Calculated results provided good agreement when compared with the post-stall aerodynamic data of two airfoils. Those airfoil sections differed in the extent of travel of the separation point with increasing angle of attack. Furthermore, the periodic wake shedding was analyzed and its time-dependent influence on the airfoil was investigated.
    Keywords: AERODYNAMICS
    Type: Journal of Fluid Mechanics; 102; Jan. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 49
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-18
    Description: An overview of the Pathfinder Models Program is presented. The Pathfinder program is a major research and development activity in support of the National Transonic Facility Activation Plan. The program scope, models design approach, and Pathfinder model configurations are presented along with a discussion of major supportive program activities. The anticipated design criteria for NTF models are presented.
    Keywords: AERODYNAMICS
    Type: High Reynolds Number Res. - 1980; p 37-52
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 50
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-18
    Description: Amiet's (1976, 1978) solution to the problem of airfoil trailing edge noise prediction is discussed in light of the results of evanescent wave theory's application to the measured surface pressure behavior near the trailing edge of an airfoil with a turbulent boundary layer. The method employed by Amiet has the advantage of incorporating the effect of finite chord in its solution. The assumed form of the pressure distribution is examined as well as the constant turbulent boundary layer convection assumption, which is found to be unnecessarily restrictive.
    Keywords: AERODYNAMICS
    Type: Journal of Sound and Vibration; 77; Aug. 8
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 51
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-18
    Description: It is shown that the mechanisms of forebody drag reduction by means of either a spike or a forward-facing jet are similar, with the maximum achievable drag reduction being of the same order. Because the jet may be a relatively cool gas, however, the forward facing jet has the additional capability of reducing the aerodynamic heating that is so severe at high Mach numbers. By means of the correlation presented, jet ejection parameters may be chosen to achieve maximum permissible forebody drag reduction. The correlation method uses a momentum coefficient that characterizes jet efflux and freestream conditions.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 19; Oct. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 52
    Publication Date: 2011-08-18
    Description: A complete Newtonian flow theory is presented for unsteady flow past oscillating bodies of revolution of general shape at very high Mach numbers, consideration being given to a centrifugal force correction to the impact pressures. Expressions are obtained for the unsteady pressure and the stability derivatives are presented in closed form. It is stressed that the correction for the centrifugal force, which arises because of the curved trajectories that fluid particles follow along the surface subsequent to their impact, must not be neglected. If the correction is included, the theory is shown to be in excellent agreement with experimental results for relatively sharp cones. Theoretical results are in poor agreement with experimental results in air for bodies having moderate or large-nose bluntness.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 19; Oct. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 53
    Publication Date: 2017-10-02
    Description: To inlet flow field and engine inlet performance data for an advanced fighter aircraft configuration were obtained over the Mach 0.6 to 2.0 range. The studies not only provided extensive data for the baseline arrangement, but also evaluated the effects of key aircraft configuration variables (inlet location, canopy-dorsal integration, wing leading-edge extension planform area, and variable incidence canards) on top inlet performance. In order to set these data in the context of practical aircraft systems top inlet performance is compared with that of more conventional inlet/airframe integrations. The results of these evaluations show that, for the top inlet configuration tested, relatively good inlet performance and compatibility characteristics are maintained during subsonic and transonic maneuver. However, at supersonic speeds, flow expansion over the forebody and wings causes an increase in local inlet Mach number subsequently reduces inlet performance levels. These characteristics infer that although top inlets many not pose a viable design option for aircraft requiring a high degree of supersonic maneuverability, they have distinct promise for vehicles with subsonic and transonic maneuver capabilities.
    Keywords: AERODYNAMICS
    Type: AGARD Aerodyn. of Power Plant Installation; 17 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 54
    Publication Date: 2017-10-02
    Description: The aerodynamic phenomena associated with high angles of attack and their effects on the dynamic stability characteristics of airplane and missile configurations are examined. Information on dynamic effects is limited. Steady flow phenomena and their effects on the forces and moments are reviewed. The effects of asymmetric vortices and of vortex bursting on the dynamic response of flight vehicles are reviewed with respect to their influence on: (1) nonlinearity of aerodynamic coefficients with attitude, rates, and accelerations; (2) cross coupling between longitudinal and lateral directional models of motion; (3) time dependence and hysteresis effects; (4) configuration dependencey; and (5) mathematical modeling of the aerodynamics.
    Keywords: AERODYNAMICS
    Type: AGARD Dyn. Stability Parameters; 18 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 55
    Publication Date: 2017-10-02
    Description: Topics discussed include shear flow models, simplified models for treating separation, classical linear theory, a local linearization theory, a transonic linear theory, a transonic nonlinear theory, the experiment of Davis, and the experiment of Tijdeman. It is concluded that shear flow models, which have proven very accurate in taking into account boundary layer effects for panel flutter, are likely to be less so for lifting surface flutter. For many applications in transonic flow, transonic linear theory will be adequate.
    Keywords: AERODYNAMICS
    Type: AGARD Boundary Layer Effects on Unsteady Airloads; 28 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 56
    Publication Date: 2017-10-02
    Description: Scale effects are discussed with reference to a conventional airfoil (NACA 64A010) and a supercritical airfoil (NLR 7301) at mean flow conditions that support both weak and strong shock waves. During the experiment the Reynolds number was varied from 3 x 10 to the sixth power at time history data are presented over the range of reduced frequencies that are important in aeroelastic applications. The experimental data show that viscous effects are important in the case of the supercritical airfoil at all flow conditions and in the case of the conventional airfoil under strong shock wave conditions. Some frequency dependent viscous effects were also observed.
    Keywords: AERODYNAMICS
    Type: AGARD Boundary Layer Effects on Unsteady Airfoils; 13 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 57
    Publication Date: 2018-12-01
    Description: Experimental results obtained at NASA Langley during studies of natural laminar flow (NLF) over commercially produced aircraft surfaces are reported. The general aviation aircraft examined were light aircraft, yet displayed NLF extents close to the maximum available and equivalent to high performance business aircraft flying envelopes. Sublimating chemicals and acoustic detection techniques were employed to measure the boundary layer transition. Theoretical predictions of boundary layer stability were found to match well with the experimental data, with consideration given to both swept wings and the amplitudes of allowable waves on the airfoil surfaces. The presence of the NLF on the airfoil surfaces confirmed the benefits available from use of composite materials for airfoil surfaces.
    Keywords: AERODYNAMICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 58
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2016-06-07
    Description: A supercritical airfoil section was designed with favorable pressure gradients on both the upper and lower surfaces. Wind tunnel tests were conducted in the Langley 8 Foot Transonic Pressure Tunnel. The outer wing panels of the F-111 TACT airplane were modified to incorporate partial span test gloves having the natural laminar, flow profile. Instrumentation was installed to provide surface pressure data as well as to determine transition location and boundary layer characteristics. The flight experiment encompassed 19 flights conducted with and without transition fixed at several locations for wing leading edge sweep angles which varied from 10 to 26 at Mach numbers from 0.80 to 0.85 and altitudes of 7620 meters and 9144 meters. Preliminary results indicate that a large portion of the test chord experienced laminar flow.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Research Center Advan. Aerodyn. and Active Controls; p 135-144
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 59
    Publication Date: 2019-06-28
    Description: The intent of the present experiment is to define a near optimum value of drag coefficient for a high volume type of vehicle through the use of a boattail, on a vehicle already having rounded front corners and an underbody seal, or fairing. The results of these tests will constitute a baseline for later follow-on studies to evaluate candidate methods of obtaining afterbody drag coefficients approaching the boattail values, but without resorting to such impractical afterbody extensions. The current modifications to the box-shaped vehicle consisted of a full and truncated boattail in conjunction with the faired and sealed underbody. Drag results from these configurations are compared with corresponding wind tunnel results of a 1/10 scale model. Test velocities ranged up to 96.6 km/h (60 mph) and the corresponding Reynolds numbers ranged up to 1.3 x 10 to the 7th power based on the vehicles length which includes the boattail. A simple coast-down technique was used to define drag.
    Keywords: AERODYNAMICS
    Type: NASA-CR-176982 , NAS 1.26:176982
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 60
    Publication Date: 2016-06-07
    Description: Method which present a student with a more challenging and true to life situation of needing to conduct research in a problem solving context--and not thinking about organization of format until research and thinking are complete are investigated. Simulation-gaming techniques which attempt to teach initiative and creativity that library research are used for this purpose. However, it is shown case studies provide the greatest opportunities to engage the students in problem solving situations in which they develop skills as researchers and writers.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Research Center Tech. Commun., Pt. 1; p 99-103
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 61
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2019-01-25
    Description: Dynamic stall and its consequences which are important to aircraft design and operation are discussed. A certain degree of unsteadyness always accompanies the flow over streamlined bodies at high angle of attack, however, the stall of lifting surface undergoing unsteady motion is more complex than static stall. Dynamic stall remains a major unsolved problem with a variety of applications in aeronautics, hydrodynamics and wind engineering.
    Keywords: AERODYNAMICS
    Type: Von Karman Inst. for Fluid Dynamics Unsteady Airloads and Aeroelastic Probl. in Separated and Transonic Flow; 28 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 62
    Publication Date: 2019-01-25
    Description: The impulsive nature of noise due to the interaction of a rotor blade with a tip vortex is studied. The time signature of this noise is calculated theoretically based on the measured blade surface pressure fluctuation of an operational load survey rotor in slow descending flight and is compared with the simultaneous microphone measurement. Particularly, the physical understanding of the characteristic features of a waveform is extensively studied in order to understand the generating mechanism and to identify the important parameters. The interaction trajectory of a tip vortex on an acoustic planform is shown to be a very important parameter for the impulsive shape of the noise. The unsteady nature of the pressure distribution at the very leading edge is also important to the pulse shape. The theoretical model using noncompact linear acoustics predicts the general shape of interaction impulse pretty well except for peak amplitude which requires more continuous pressure information along the span at the leading edge.
    Keywords: AERODYNAMICS
    Type: DGLR Seventh European Rotorcraft and Powered Lift Aircraft Forum; 20 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 63
    Publication Date: 2019-06-28
    Description: An airfoil designed for helicopter rotor application is investigated. The airfoil is designed to increase maximum normal force coefficient while maintaining favorable drag divergence and pitching moment characteristics. Two modifications are also tested. Maximum normal force coefficient varies from 1.14 to 0.90 at Mach numbers from about 0.35 to 0.65. Both modifications decreased drag coefficient at zero normal force coefficient for Mach numbers near drag divergence, but were less beneficial at a normal force coefficient of -0.2.
    Keywords: AERODYNAMICS
    Type: NASA-TP-1965 , L-14825 , NAS 1.60:1965 , AVRADCOM-TR-81-B-6
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 64
    Publication Date: 2019-06-28
    Description: A task for the Energy Efficient Transport program conducted: (1) The design and wind tunnel development of high-aspect-ratio supercritical wings, investigating the cruise speed regime and also high-lift. (2) The preliminary design and evaluation of an aircraft combining a high-aspect-ratio supercritical wing with a winglet. (3) Active Controls: The determination of criteria, configuration, and flying qualities associated with augmented longitudinal stability of a level likely to be acceptable for the next generation transport; and the design of a practical augmentation system. The baseline against which the work was performed and evaluated was the Douglas DC-X-200 twin engine derivative of the DC-10 transport. The supercritical wing development showed that the cruise and buffet requirements could be achieved and that the wing could be designed to realize a sizable advantage over today's technology. Important advances in high lift performance were shown. The design study of an aircraft with supercritical wing and winglet suggested advantages in weight and fuel economy could be realized. The study of augmented stability, conducted with the aid of a motion base simulator, concluded that a negative static margin was acceptable for the baseline unaugmented aircraft.
    Keywords: AERODYNAMICS
    Type: NASA-CR-3469 , NAS 1.26:3469
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 65
    Publication Date: 2019-06-28
    Description: A high aspect ratio supercritical wing with oscillating control surfaces is described. The semispan wing model was instrumented with 252 static orifices and 164 in situ dynamic pressure gases for studying the effects of control surface position and sinusoidal motion on steady and unsteady pressures. Data from the present test (this is the second in a series of tests on this model) were obtained in the Langley Transonic Dynamics Tunnel at Mach numbers of 0.60 and 0.78 and are presented in tabular form.
    Keywords: AERODYNAMICS
    Type: NASA-TM-83201 , L-14831 , NAS 1.15:83201
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 66
    Publication Date: 2019-06-28
    Description: An experimental investigation was conducted in the Ames 12-Foot Pressure Wind Tunnel to determine the unpowered aerodynamic characteristics of a 15-percent-scale model of a twin-engine commuter aircraft. Model longitudinal aerodynamic characteristics were examined at discrete flap deflections for various angle-of-attack and wind-tunnel-velocity ranges with the empennage on and off. Data are presented for the basic model configuration consisting of the fuselage, wing, basic wing leading edge, double slotted flaps, midengine nacelles, and empennage. Other configurations tested include a particle-span drooped leading edge (dropped outboard of the engine nacelles), a full-span drooped leading edge, low- and high-mounted engine nacelles, and a single-slotted flap. An evaluation was made of the model mounting system by comparing data obtained with the model mounted conventionally on the wind-tunnel model-support struts and the model inverted.
    Keywords: AERODYNAMICS
    Type: NASA-TM-81284 , A-8552
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 67
    Publication Date: 2019-06-28
    Description: Calculations of the model frequency and damping for a hingeless rotor on a gimballed support in hover are compared with measured results for two configurations (differing in blade flap stiffness). Good correlation is obtaned when an inflow dynamics model is used to account for the influence of the unsteady aerodynamics. The effect of the unsteady aerodynamics is significant for this rotor system. The inflow dynamics model introduces additional states corresponding to perturbations of the wake-induced velocity at the rotor disk. The calculations confirm the experimental observation that the inflow mode introduced by these additional states is measurable for one configuration but not for the other.
    Keywords: AERODYNAMICS
    Type: NASA-TM-81302 , A-8635 , USAAVRADCOM-TR-81-B-16
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 68
    Publication Date: 2019-06-28
    Description: The aerodynamic performance of the inlet manifold and stator assembly of the compressor drive turbine was experimentally determined with cold air as the working fluid. The investigation included measurements of mass flow and stator-exit fluid torque as well as radial surveys of total pressure and flow angle at the stator inlet and annulus surveys of total pressure and flow angle at the stator exit. The stator-exit aftermixed flow conditions and overall stator efficiency were obtained and compared with their design values and the experimental results from three other stators. In addition, an analysis was made to determine the constituent aerodynamic losses that made up the stator kinetic energy loss.
    Keywords: AERODYNAMICS
    Type: NASA-TM-82682 , DOE/NASA/1011-34 , E-572 , AVRADCOM-TR-80-C-20
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 69
    Publication Date: 2019-06-28
    Description: A flight-test based research program was performed to investigate the aerodynamics and cooling of a horizontally-opposed engine installation. Specific areas investigated were the internal aerodynamics and cooling mechanics of the installation, inlet aerodynamics, and exit aerodynamics. The applicable theory and current state of the art are discussed for each area. Flight-test and ground-test techniques for the development of the cooling installation and the solution of cooling problems are presented. The results show that much of the internal aerodynamics and cooling technology developed for radial engines are applicable to horizontally opposed engines. Correlation is established between engine manufacturer's cooling design data and flight measurements of the particular installation. Also, a flight-test method for the development of cooling requirements in terms of easily measurable parameters is presented. The impact of inlet and exit design on cooling and cooling drag is shown to be of major significance.
    Keywords: AERODYNAMICS
    Type: NASA-CR-3405
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 70
    Publication Date: 2019-06-28
    Description: The goal of this research is the assessment of the validity of existing three dimensional numerical programs in the prediction of the flow fields about general three dimensional hypersonic bodies. A detailed experimental research program was performed in which surface and flow field pressures were mapped. The results of the experimental work were compared with existing inviscid programs. Improvements were made on the existing numerical methods to include angle of attack. A summary of this work is presented.
    Keywords: AERODYNAMICS
    Type: NASA-CR-164133
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 71
    Publication Date: 2019-06-28
    Description: An aerodynamic analysis system based on potential theory at subsonic/supersonic speeds and impact type finite element solutions at hypersonic conditions is described. Three dimensional configurations having multiple nonplanar surfaces of arbitrary planform and bodies of noncircular contour may be analyzed. Static, rotary, and control longitudinal and lateral directional chracteristics may be generated. The analysis has been implemented on a time sharing system in conjunction with an input tablet digitizer and an interactive graphics input/output display and editing terminal to maximize its responsiveness to the preliminary analysis problem. Typical simulation indicates that program provides an efficient analysis for systematically performing various aerodynamic configuration tradeoff and evaluation studies.
    Keywords: AERODYNAMICS
    Type: NASA-CR-165628 , NA-80-374-PT-2
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 72
    Publication Date: 2019-06-28
    Description: An investigation of approximate theoretical techniques for predicting aerodynamic characteristics and surface pressures for relatively slender vehicles at moderate hypersonic speeds was performed. Emphasis was placed on approaches that would be responsive to preliminary configuration design level of effort. Potential theory was examined in detail to meet this objective. Numerical pilot codes were developed for relatively simple three dimensional geometries to evaluate the capability of the approximate equations of motion considered. Results from the computations indicate good agreement with higher order solutions and experimental results for a variety of wing, body, and wing-body shapes for values of the hypersonic similarity parameter M delta approaching one.
    Keywords: AERODYNAMICS
    Type: NASA-CR-165651 , NA-80-611
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 73
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2019-06-28
    Description: The general features of dynamic stall on oscillating airfoils are explained in terms of the vortex shedding phenomenon, and the important differences between static stall, light dynamic stall, and deep stall are described. An overview of experimentation and prediction techniques is given.
    Keywords: AERODYNAMICS
    Type: NASA-TM-81264 , A-8464
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 74
    Publication Date: 2019-06-28
    Description: An investigation was conducted in the Langley 16 Foot Transonic Tunnel to determine the aeropropulsive characteristics of a single expansion ramp nozzle (SERN) and a two dimensional convergent divergent nozzle (2-D C-D) installed with both an aft swept and a forward swept wing. The SERN was tested in both an upright and an inverted position. The effects of thrust vectoring at nozzle vector angles from -5 deg to 20 deg were studied. This investigation was conducted at Mach numbers from 0.40 to 1.20 and angles of attack from -2.0 deg to 16 deg. Nozzle pressure ratio was varied from 1.0 (jet off) to about 9.0. Reynolds number based on the wing mean geometric chord varied from about 3 million to 4.8 million, depending upon free stream number.
    Keywords: AERODYNAMICS
    Type: NASA-TP-1778 , L-13902
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 75
    Publication Date: 2019-06-28
    Description: Forty-six different fins, which were members of twelve plan-form families, were tested. A two dimensional Boeing single element airfoil at an angle of attack of eight degrees and a sweepback angle of thirty-two was used to simulate a portion of the wing of a generator aircraft. Various free stream velocities were used to test any individual fin at its particular angle of attack. While the fin itself was mounted on the upper surface of the generator model, the angle of attack of each fin was varied until stall was reached and/or passed. The relative fin vortex strengths were measured in two ways. First, the maximum angular velocity of a four blade rotor placed in the fin vortex center was measured with the use of a stroboscope. Second, the maximum rolling moment on a following wing model placed in the fin vortex center was measured by a force balance.
    Keywords: AERODYNAMICS
    Type: NASA-CR-163874 , ISU-ERI-AMES-81112
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 76
    Publication Date: 2019-06-28
    Description: The effect of the specific heat ratio gamma of the incoming ideal gas on the flow properties, especially on pressure distributions along the base and sting surfaces and on reattachment distance, was investigated. The specific heat ratios considered were gamma = 1.2, 1.4, and 1.667. Also, effects of other major parameters, such as eddy-viscosity coefficient (or effective Reynolds number) and Mach number, on the afterbody pressure and reattachment distance were studied and are discussed. Evolution of shock induced flow and stabilization time were examined and are discussed for a transient problem. The important influence of the flow-field geometry, pressure distributions, and reattachment distance on the aerodynamics radiative heat transfer for an atmosphere entry probe in high speed flight are briefly described.
    Keywords: AERODYNAMICS
    Type: NASA-TP-1769 , A-8271
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 77
    Publication Date: 2019-06-28
    Description: The analysis is based on a primary secondary velocity decomposition in a given coordinate system, and leads to approximate governing equations which correct an a priori inviscid solution for viscous effects, secondary flows, total pressure distortion, heat transfer, and internal flow blockage and losses. Solution of the correction equations is accomplished as an initial value problem in space using an implicit forward marching technique. The overall solution procedure requires significantly less computational effort than Navier-Stokes algorithms. The solution procedure is effective even with the extreme local mesh resolution which is necessary to solve near wall sublayer regions in turbulent flow calculations. Computed solutions for both laminar and turbulent flow compared very favorably with available analytical and experimental results. The overall method appears very promising as an economical procedure for making detailed predictions of viscous primary and secondary flows in highly curved passages.
    Keywords: AERODYNAMICS
    Type: NASA-CR-3388 , R80-900007-12
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 78
    Publication Date: 2019-06-28
    Description: The clustering algorithm is controlled by a second-order, ordinary differential equation which uses the airfoil surface density gradient as a forcing function. The solution to this differential equation produces a surface grid distribution which is automatically clustered in regions with large gradients. The interior grid points are established from this surface distribution by using an interpolation scheme which is fast and retains the desirable properties of the original grid generated from the standard elliptic equation approach.
    Keywords: AERODYNAMICS
    Type: NASA-TM-81330 , A-8733
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 79
    Publication Date: 2019-06-28
    Description: The effect of leading-edge vortex flaps on the aerodynamic characteristics of highly swept-back wings is analytically investigated, using the free vortex sheet method. The method, based on a three-dimensional inviscid flow model, is an advanced panel type employing quadratic doublet distributions to represent the wing surface, rolled-up vortex sheet and wake and is capable of computing forces, moments and surface pressures.
    Keywords: AERODYNAMICS
    Type: Journal of Aircraft; 18; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 80
    Publication Date: 2019-06-28
    Description: The stability of three-dimensional rotating disk flow is investigated, including the effects of Coriolis forces and streamline curvature. The numerical results show that the critical Reynolds number for establishment of stationary vortex flow is 287. These vortices spiral outward at an angle of about 11.2 deg, and transition to turbulence occurs when their total amplification is about e to the 11th. New experimental results are also reported on the spatial growth rates of the stationary vortices. It is shown that the analysis gives growth rates that compare much better with the experimental results than do results obtained using the Orr-Sommerfeld equation. The experimental results tend to support the numerical prediction that the number of stationary vortices varies directly with the Reynolds number. The calculations also indicate the existence of weakly unstable propagating (type II) modes at low Reynolds numbers (Critical Reynolds Number being approximately equal to 49).
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 19; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 81
    Publication Date: 2019-06-28
    Description: Hybrid wing planforms are studied for adoption on supersonic transport and fighter aircraft. The free vortex sheet method is used to determine effects of the leading-edge sweep angles on the aerodynamic performance of a double arrow wing with a strake. Results show lift and drag increase with the increase of the inboard and outboard leading-edge sweep angles. However, the lift-to-drag ratio is little influenced by the changes in these sweep angles. Spanwise surface pressure distributions on the aft region are influenced by the inboard sweep angle while the outboard sweep angle has no effect on these pressures. Finally, the experimental data and predicted results are compared to show good agreement.
    Keywords: AERODYNAMICS
    Type: Journal of Aircraft; 18; Aug. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 82
    Publication Date: 2019-06-28
    Description: The tests were conducted at Mach numbers from 0.40 to 0.90, at angles of attack up to 45 deg for the lower Mach numbers, and at angles of sideslip up to 15 deg. The model variations under study included adding a canard surface and deflecting horizontal tails, ailerons, and rudders.
    Keywords: AERODYNAMICS
    Type: NASA-TM-83171 , L-14433
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 83
    Publication Date: 2019-06-28
    Description: An unsteady potential flow analysis, which accounts for the effects of blade geometry and steady turning, was developed to predict aerodynamic forces and moments associated with free vibration or flutter phenomena in the fan, compressor, or turbine stages of modern jet engines. Based on the assumption of small amplitude blade motions, the unsteady flow is governed by linear equations with variable coefficients which depend on the underlying steady low. These equations were approximated using difference expressions determined from an implicit least squares development and applicable on arbitrary grids. The resulting linear system of algebraic equations is block tridiagonal, which permits an efficient, direct (i.e., noniterative) solution. The solution procedure was extended to treat blades with rounded or blunt edges at incidence relative to the inlet flow.
    Keywords: AERODYNAMICS
    Type: NASA-CR-3455 , R81-914777-7
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 84
    Publication Date: 2019-06-28
    Description: A wind tunnel investigation was conducted in the Langley 4 by 7 meter tunnel to determine the effects of leading edge sweep, aspect ratio, flap deflection, and elevon deflection on the longitudinal aerodynamic characteristics of a span distributed load advanced cargo aircraft (spanloader). Model configurations consisted of leading edge sweeps of 0, 15, 30 and 45 deg and aspect ratios of approximately 2, 4, 6, and 8. Data were obtained for angles of attack of -8 to 18 deg out of ground effect and at angles of attack of -2, 0, and 2 deg in ground effect at Mach number equal 0.14. Flap and elevon deflections ranged from -20 to 20 deg. The data are represented in tabulated form.
    Keywords: AERODYNAMICS
    Type: NASA-TM-80199
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 85
    Publication Date: 2019-06-28
    Description: Two dimensional wind tunnel test results obtained for supercritical airfoils indicated that substantial improvements in aircraft performance at high subsonic speeds could be achieved by shaping the airfoil to improve the supercritical flow above the upper surface. Significant increases in the drag divergence Mach number, the maximum lift coefficient for buffer onset, and the Mach number for buffet onset at a given lift coefficient were demonstrated for the supercritical airfoil, as compared with a NACA 6 series airfoil of comparable thickness. These trends were corroborated by results from three dimensional wind tunnel and flight tests. Because these indicated extensions of the buffet boundaries could provide significant improvements in the maneuverability of a fighter airplane, an exploratory wind tunnel investigation was initiated which demonstrated that significant aerodynamic improvements could be achieved from the direct substitution of a supercritical airfoil on a variable wing sweep multimission airplane model.
    Keywords: AERODYNAMICS
    Type: NASA-TM-81356 , H-1148
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 86
    Publication Date: 2019-06-28
    Description: A numerical procedure for the iterative solution of inviscid flow problems is described, and its utility for the calculation of steady subsonic and transonic flow fields is demonstrated. Application of the surrogate equation technique defined herein allows the formulation of stable, fully conservative, type dependent finite difference equations for use in obtaining numerical solutions to systems of first order partial differential equations, such as the steady state Euler equations. Steady, two dimensional solutions to the Euler equations for both subsonic, rotational flow and supersonic flow and to the small disturbance equations for transonic flow are presented.
    Keywords: AERODYNAMICS
    Type: NASA-TP-1866 , E-583
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 87
    Publication Date: 2019-06-28
    Description: A supersonic triplet singularity was developed which eliminates internal waves generated by panels having supersonic edges. The triplet is a linear combination of source and vortex distributions which gives directional properties to the perturbation flow field surrounding the panel. The theoretical development of the triplet singularity is described together with its application to the calculation of surface pressures on wings and bodies. Examples are presented comparing the results of the new method with other supersonic methods and with experimental data.
    Keywords: AERODYNAMICS
    Type: NASA-CR-3466 , AMI-8104
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 88
    Publication Date: 2019-06-28
    Description: A fast algorithm was developed for accurately generating boundary-conforming, three-dimensional, consecutively refined computational grids applicable to arbitrary wing-body and axial turbomachinery geometries. The method is based on using an analytic function to generate two-dimensional grids on a number of coaxial axisymmetric surfaces positioned between the centerbody and the outer radial boundary. These grids are of the O-type and are characterized by quasi-orthogonality, geometric periodicity, and an adequate resolution throughout the flow field. Because the built-in nonorthogonal coordinate stretching and shearing cause the grid lines leaving the blade or wing trailing edge to end at downstream infinity, the numerical treatment of the three-dimensional trailing vortex sheets is simplified.
    Keywords: AERODYNAMICS
    Type: NASA-TP-1920 , E-590
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 89
    Publication Date: 2019-06-28
    Description: Buffet tests of two wings with different leading-edge sweep show that it is feasible to use the standards wing root bending moment technique in a cryogenic wing tunnel. The results for the 65 deg sweep delta wing indicate the importance of matching the reduced frequency parameter in model tests for planforms which are sensitive to reduced frequency parameter if quantitative buffet measurements are required. The unique ability of a pressurized cryogenic wind tunnel to separate the effects of Reynolds number and of aeroelastic distortion by variations in the tunnel stagnation temperature and pressure was demonstrated.
    Keywords: AERODYNAMICS
    Type: NASA-TM-81923
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 90
    Publication Date: 2019-06-28
    Description: An experiment was conducted to determine wing-alone supersonic aerodynamic characteristics at high angles of attack. The wings tested varied in aspect ratio from 0.5 to 4.0 and in taper ratio from 0 to 1.0. The wings were tested at angles of attack ranging rom -5 deg to 60 deg and at Mach number from 1.60 to 4.60. The aerodynamic characteristics were obtained by integrating local pressures measured over the wing surfaces. Presented and discussed are results showing the effects of aspect ratio, taper ratio, Mach number, and angle of attack on force and moment coefficients and center of pressure locations. Also included are tabulations of the pressure measurements.
    Keywords: AERODYNAMICS
    Type: NASA-TP-1889 , L-14546
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 91
    Publication Date: 2019-06-28
    Description: Investigations were conducted in the Langley 16-Foot Transonic Tunnel to provide data on a 0.10-scale model of the prototype F-18 airplane and a 0.047-scale model of the F-15 three-surface configuration (canard, wing, and horizontal tails). Test data were obtained at static conditions and at Mach numbers from 0.6 to 1.2 over an angle-of-attack range from 2 deg to 15 deg. Nozzle pressure ratio was varied from jet off to about 8.0.
    Keywords: AERODYNAMICS
    Type: NASA-TP-1890 , L-14531
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 92
    Publication Date: 2019-06-28
    Description: An inviscid analytical study was conducted to determine the upstream flow perturbations caused by placing choke bumps in a wind tunnel. A computer program based on the stream-tube curvature method was used to calculate the resulting flow fields for a nominal free-stream Mach number range of 0.6 to 0.9. The choke bump geometry was also varied to investigate the effect of bump shape on the disturbance produced. Results from the study indicate that a region of significant variation from the free-stream conditions exists upstream of the throat of the tunnel. The extent of the disturbance region was, as a rule, dependent on Mach number and the geometry of the choke bump. In general, the upstream disturbance distance decreased for increasing nominal free-stream Mach number and for decreasing length-to-height ratio of the bump. A polynomial-curve choke bump usually produced less of a disturbance than did a circular-arc bump and going to an axisymmetric configuration (modeling choke bumps on all the tunnel walls) generally resulted in a lower disturbance than with the corresponding two dimensional case.
    Keywords: AERODYNAMICS
    Type: NASA-TP-1892 , L-14415
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 93
    Publication Date: 2019-06-28
    Description: Data from wind tunnel tests of a powered propeller and nacelle mounted on a supercritical wing are analyzed. Installation of the nacelle significantly affected the wing flow and the flow on the upper surface of the wing is separated near the leading edge under powered conditions. Comparisons of various theories with the data indicated that the Neumann surface panel solution and the Jameson transonic solution gave results adequate for design purposes. A modified wing design was developed (Mod 3) which reduces the wing upper surface pressure coefficients and section lift coefficients at powered conditions to levels below those of the original wing without nacelle or power. A contoured over the wing nacelle that can be installed on the original wing without any appreciable interference to the wing upper surface pressure is described.
    Keywords: AERODYNAMICS
    Type: NASA-CR-166214 , ACEE-25-FR-1564
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 94
    Publication Date: 2019-06-28
    Description: The performance of a conventional engine/inlet installation, in which inlet and engine flow field interaction occurs, was compared to the performance of the same inlet remote coupled to the engine. The remote coupled inlet configuration decouples the influence of the engine on the inlet flow field and simulates current small scale inlet test techniques in which inlet airflow is provided by a vacuum source or coupled engine. The investigation was conducted in the NASA-Ames 40- by 80-foot wind tunnel using a General Electric TF-34 turbofan engine and a subsonic inlet having an average inlet contraction ratio of 1.26. Test results indicated that engine interaction allows the inlet to operate with lower distortion levels at and beyond the separation angle-of-attack experienced without engine interaction.
    Keywords: AERODYNAMICS
    Type: NASA-CR-166136 , D6-49228
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 95
    Publication Date: 2019-06-28
    Description: Tests were conducted in the Ames 9 by 7 ft supersonic wind tunnel to measure the aerodynamic characteristics of two horizontal attitude takeoff and landing V/STOL fighter/attack aircraft concepts. One concept featured a jet diffuser ejector for its vertical lift system and the other employed a remote augmentation lift system (RALS). Test results for Mach numbers from 1.6 to 2.0 are reported. Effects of varying the angle of attack (-4 deg to +17 deg), angle of sideslip (-4 deg to +8 deg) Mach number, and configuration building were investigated. The effects of wing trailing edge flap deflections, canard incidence, and vertical tail deflections were also explored as well as the effects of varying the canard longitudinal location and shapes of the inboard nacelle body strakes.
    Keywords: AERODYNAMICS
    Type: NASA-TM-81286 , A-8559
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 96
    Publication Date: 2019-06-28
    Description: The AEROX aerodynamic computer program which provides accurate predictions of induced drag and trim drag for the full angle of attack range and for Mach numbers from 0.4 to 3.0 is described. This capability is demonstrated comparing flight test data and AEROX predictions for 17 different tactical aircraft. Values of minimum (skin friction, pressure, and zero lift wave) drag coefficients and lift coefficient offset due to camber (when required) were input from the flight test data to produce total lift and drag curves. The comparisons of trimmed lift drag polars show excellent agreement between the AEROX predictions and the in flight measurements.
    Keywords: AERODYNAMICS
    Type: NASA-TM-81237 , A-8344
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 97
    Publication Date: 2019-06-28
    Description: An improved version of Woodward's chord plane aerodynamic panel method for subsonic and supersonic flow is developed for cambered wings exhibiting edge separated vortex flow, including those with leading edge vortex flaps. The exact relation between leading edge thrust and suction force in potential flow is derived. Instead of assuming the rotated suction force to be normal to wing surface at the leading edge, new orientation for the rotated suction force is determined through consideration of the momentum principle. The supersonic suction analogy method is improved by using an effective angle of attack defined through a semi-empirical method. Comparisons of predicted results with available data in subsonic and supersonic flow are presented.
    Keywords: AERODYNAMICS
    Type: NASA-CR-3449 , CRINC/FRL-426-1
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 98
    Publication Date: 2019-06-28
    Description: Results from analytical and experimental studies of the aerodynamic characteristics of a turbojet-boosted launch vehicle concept through a Mach number range of 1.50 to 2.86 are presented. The vehicle consists of a winged orbiter utilizing an area-ruled axisymmetric body and two winged turbojet boosters mounted underneath the orbiter wing. Drag characteristics near zero lift were of prime interest. Force measurements and flow visualization techniques were employed. Estimates from wave drag theory, supersonic lifting surface theory, and impact theory are compared with data and indicate the ability of these theories to adequately predict the aerodynamic characteristics of the vehicle. Despite the existence of multiple wings and bodies in close proximity to each other, no large scale effects of boundary layer separation on drag or lift could be discerned. Total drag levels were, however, sensitive to booster locations.
    Keywords: AERODYNAMICS
    Type: NASA-TP-1888 , L-14509
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 99
    Publication Date: 2019-06-28
    Description: The wind tunnel testing of a scale model of a tandem fan nacelle designed for a type (subsonic cruise) V/STOL aircraft configuration is discussed. The performance for the isolated front inlet and for the combined front and aft inlets is reported. Model variables include front and aft inlets with aft inlet variations of short and long aft inlet cowls, with a shaft simulator and diffuser vortex generators, cowl lip fillets, and nacelle strakes. Inlet pressure recovery, distortion, and inlet angle-to-attack separation limits were evaluated at tunnel velocity from 0 to 240 knots, angles-of-attack from -10 to +40 degrees and inlet flow rates corresponding to throat Mach number from 0.0 to 0.6. Combined nacelle pitch and yaw runs up to 30 deg. were also made.
    Keywords: AERODYNAMICS
    Type: NASA-CR-165310 , TR-2-53020/IR-52726
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 100
    Publication Date: 2019-06-28
    Description: A direct inverse method is presented for computing the flow about low speed airfoils under high lift massive separation conditions. On the lower surface the flowfield is determined using an iterative inviscid relaxation technique coupled to a laminar turbulent momentum integral boundary layer scheme direct boundary conditions. On the upper surface, the flowfield is also computed directly with viscous interaction up to the separation point, with the separation point and separated pressure level determined as part of the solution. Downstream of separation, inverse boundary conditions are utilized; and the flowfield and displacement surface are calculated. Typical results and comparisons with experimental data for GA(W)-2 and NACA 4412 airfoils are presented, including pressure distributions, lift, and drag coefficients versus angle of attack.
    Keywords: AERODYNAMICS
    Type: AGARD Computation of Viscous-Inviscid Interactions; 10 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...