ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Other Sources  (4,143)
  • STRUCTURAL MECHANICS  (1,513)
  • THERMODYNAMICS AND COMBUSTION  (1,364)
  • AERODYNAMICS  (1,266)
  • 1970-1974  (4,129)
  • 1940-1944  (9)
  • 1925-1929  (1)
  • 1900-1904  (4)
Collection
  • Other Sources  (4,143)
Source
Keywords
Years
Year
  • 1
    facet.materialart.
    Unknown
    Noise and vibration level reduction by covering metal structures with layers of damping materials (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: One of the most important methods of reducing the noise and vibration level is the damping of the secondary sources, such as metal plates, often used in vehicle structures, by means of covering materials with high internal viscosity. Damping layers are chosen at an optimum thickness corresponding to the frequency and temperature range in which a certain structure works. The structure's response corresponding to various real situations is analyzed by means of a measuring chain including electroacoustical or electromechanical transducers. The experimental results provide the dependence of the loss factor and damping transmission coefficient as a function of the damping layer thickness or of the frequency for various viscoelastic covering materials.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 246-253
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 2
    facet.materialart.
    Unknown
    Vibration and recoil control of pneumatic hammers (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: Vibration sources are described for pneumatic hammers used in the mining industry (pick hammers), in boiler shops (riveting hammers), etc., bringing to light the fact that the principal vibration source is the variation in air pressure inside the cylinder. The present state of the art of vibration control of pneumatic hammers as it is practiced abroad, and the solutions adopted for this purpose, are discussed. A new type of pneumatic hammer with a low noise and vibration level is presented.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 79-84
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 3
    facet.materialart.
    Unknown
    Vibration control in forge hammers (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: Special measures are discussed for calculating, designing and executing a forge hammer foundation, so that the vibrations that occur during its working will not be transmitted to neighboring machinery, workrooms and offices. These vibrations are harmful to the workers near the forge hammer.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 73-78
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 4
    facet.materialart.
    Unknown
    Experimental determination of the vibration level in 5,100 kW electric locomotive assemblies (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: Because of the high vibration level occurring during the running of electric locomotives, mechanical defects occur in the control mechanisms of auxiliary services. This fact has given rise to the necessity of determining the values of these vibrations in electric locomotives during their running. Measurements were conducted on the Craiova-Drobeta-Turnu Severin line, and measures to reduce the vibration level in electric locomotives were instituted.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 50-54
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 5
    facet.materialart.
    Unknown
    Random vibrations of linear viscoelastic beams with lumped masses (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: A method is presented of determining the mean square transversal deflection of an isotropic and homogeneous linear viscoelastic beam having a certain number of lengthwise distributed lumped masses. It is assumed that the beam is acted upon by a stationary random process uniformly distributed along the beam. The method is useful in vibration level control by means of additional lumped masses.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 36-42
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 6
    facet.materialart.
    Unknown
    Random vibrations of quadratic damping systems (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: An oscillating system with quadratic damping subjected to white noise excitation is replaced by a nonlinear, statistically equivalent system for which the associated Fokker-Planck equation can be exactly solved. The mean square responses are calculated and the optimum damping coefficient is determined with respect to the minimum mean square acceleration criteria. An application of these results to the optimization of automobile suspension damping is given.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 29-35
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 7
    facet.materialart.
    Unknown
    The response of many-storied structures under seismic actions (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: A seismic action which is characterized by the acceleration function of the seismic motion is analyzed. The equations of motion in the direction of the seismic action are determined for a completely rigid ground and for a ground with linear deformability characteristics (rotation deformability). The equation for the rotation motion is derived by considering elastic and viscoelastic properties of the foundation ground. The differential equations are written by treating the mechanical model of a many-storied structure as a fixed vertical beam with a uniformly distributed mass as well as with concentrated masses on each floor.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 43-49
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 8
    facet.materialart.
    Unknown
    Insulation of nonlinear and random vibrations in the mining industry (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: The insulation of nonlinear and random vibrations is considered for some ore preparing and sorting implements: rotary crushers, resonance screens, hammer mills, etc. The appearance of subharmonic vibrations is analyzed, and the conditions for their appearance are determined. A method is given for calculating the insulation of these vibrations by means of elastic elements made of rubber. The insulation of the random vibrations produced by Symons crushers is calculated by determining the transmissability and deformation of the insulation system for a narrow band random response.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 22-28
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 9
    facet.materialart.
    Unknown
    A mathematical model for storied buildings subjected to automatic loom stresses (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: Expressions are derived for the displacements of a many storied building subjected to the action of classical weaving looms located at different levels of the building. The building is regarded as a vertical fixed beam with a uniformly distributed mass as well as concentrated masses at each level. The calculation relations are obtained on the assumption of harmonic variation of the forces acting at each level as well as the assumption of narrow band stationary random excitatory forces.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 15-21
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 10
    facet.materialart.
    Unknown
    Study of vibrations produced by a vibrating beam used for vibrating concretes (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: For compacting concretes in building, vibrating beams are used. The vibrations are generated by inertial vibrators, and the beam is normally displaced by the operator by means of a handle that is elastically fastened to the beam by means of rubber pads. Considered are vibrations transmitted to the operator, taking into account the beam's shock vibration motions. The steady state motion of a dynamic beam pattern is studied, and results of experimental tests with existing equipment are presented.
    Keywords: STRUCTURAL MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 9-14
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 11
    facet.materialart.
    Unknown
    Method of calculating gas dynamics and heat transfer in single stage refrigeration units (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: A generalized mathematical model of gas-dynamic and heat transfer processes in single-stage regenerative installations operating in Stirling, MacMahon, Gifford-MacMahon, and pulsating tube cycles is proposed. A numerical method os solving initial equations on a digital computer is given. This makes it possible to calculate the change in the thermodynamic parameters in the working cycle in different machine components, as well as the dependence of cold productivity on the temperature level in the steady regime.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Space Res. in the Ukraine, No. 3 (NASA-TT-F-15537); p 124-138
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 12
    facet.materialart.
    Unknown
    Stresses in dome-shaped shells of revolution with discontinuities at the apex (1974)
    In:  CASI
    Details
    Publication Date: 2006-04-02
    Description: Asymptotic solutions of Novozhilov's equations of shells of revolution are derived for axisymmetric and first harmonic loadings. The solutions obtained are valid throughout the shallow and nonshallow regions. Stresses in dome shaped shells of revolution with a discontinuity in the form of a circular hole, a circular rigid insert, or a nozzle at the apex have been investigated. Numerical results are obtained for spheres, ellipsoids, and paraboloids, containing a discontinuity under a internal pressure and moment. Curves depicting stress distributions are given. The influence of three types of discontinuity on the stresses of the shells is also given.
    Keywords: STRUCTURAL MECHANICS
    Type: Multivariant Function Model Generation; 118 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 13
    facet.materialart.
    Unknown
    Current structural vibration problems associated with noise (1974)
    In:  CASI
    Details
    Publication Date: 2011-10-14
    Description: As the performance of aerospace vehicles has increased, the noise generated by the propulsion system and by the passage of the vehicle through the air has also increased. Further increases in performance are now underway for space vehicles such as the space shuttle vehicle and for short distance takeoff and landing (STOL) aircraft, and are being planned for supersonic aircraft. The flight profiles and design features of these high-performance vehicles are reviewed and an estimate made of selected noise-induced structural vibration problems. Considerations for the prevention of acoustic fatigue, noise transmission, and electronic instrument malfunction are discussed.
    Keywords: STRUCTURAL MECHANICS
    Type: AGARD Noise Mech.; 16 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 14
    facet.materialart.
    Unknown
    Lifting-surface theory for a semi-infinite wing in oblique gust (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An unsteady lifting-surface theory is developed for the calculation of the airload on a semi-infinite-span thin wing in a compressible flow due to interaction with an oblique gust. By using the solutions obtained for a two-dimensional wing, the problem is formulated so that the unknown is taken to be the difference between the airload on the semi-infinite wing and that on a two-dimensional wing under the same gust conditions. Since this airload difference is nonzero only near the wing tip, the control points need be distributed in the tip region only; this significantly simplifies the numerical procedure. Results are presented for a wing with rectangular tip. The implication for noise and unsteady loads due to blade-vortex interaction for helicopter rotors is discussed.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 12; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 15
    facet.materialart.
    Unknown
    Inclusion of transverse shear deformation in finite element displacement formulations (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A stiffness matrix is derived for a beam element with transverse shear deformation. It is shown that straightforward energy minimization yields the correct stiffness matrix in displacement formulations when transverse shear effects are considered. Since the TIM4 beam element does not represent the geometric boundary conditions for a cantilever beam the rotation of the normal must be retained as a grid point degree of freedom.
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 12; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 16
    facet.materialart.
    Unknown
    Planetary entry aerothermodynamics. II - Computational analyses and flight experience (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Limitations concerning the possibility to simulate all the significant flow and thermal phenomena occurring during the entry of a space vehicle into a planetary atmosphere make it necessary to rely on computational analyses to obtain the required data for the design of the spacecraft needed for the NASA missions planned for the next two decades. 'Benchmark' computer programs concerned with complete, detailed, and accurate computational solutions of entry problems are considered along with programs representing engineering approximations for cases in which the accuracy provided by the benchmark programs is not needed. The information obtainable by computational analysis has to be supplemented by actual flight experience in order to meet the goals of the NASA entry-technology program. The individual space missions planned for the coming years are examined together with the possibilities for obtaining the data needed to satisfy the entry requirements in each case.
    Keywords: AERODYNAMICS
    Type: Astronautics and Aeronautics; 12; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 17
    facet.materialart.
    Unknown
    Analysis of acoustic radiation in a jet flow environment (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The analysis of sound fields from arbitrary source distributions in terms of Legendre and spherical Hankel functions is well known. The purpose of this paper is to extend this classical method of analysis to environments such as jet flows where flow and flow gradients are inherently present. The wave-equation governing the radiation of sound in such an environment is derived. The steady state flow and flow gradients in the axial and transverse directions appear as coefficients in the terms of the wave-equation. A semi-numerical method is used to solve the wave-equation in terms of modified spherical harmonics yielding the phase velocities and the directivities of an infinite set of modes. The directivity of each mode is obtained in terms of modified Legendre functions by numerical integration. Some results of these directivity and phase-velocity calculations are presented for a limited number of frequency and flow parameters. Both convective and shear refraction are shown to be important.
    Keywords: AERODYNAMICS
    Type: Journal of Sound and Vibration; 36; Sept. 8
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 18
    facet.materialart.
    Unknown
    Unified approach to aerodynamic sound generation in the presence of solid boundaries (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A general equation governing aerodynamic sound generation in the presence of solid boundaries is derived. It is shown that all the theories in the literature appear as special cases of this general equation. Derived special equations for propeller and fan noise are likewise shown to be more general than the conventional equations in that they make allowance for variation in retarded time over the blade surfaces.
    Keywords: AERODYNAMICS
    Type: Acoustical Society of America; vol. 56
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 19
    facet.materialart.
    Unknown
    Nonequilibrium boundary layer at a stagnation point for a hydrogen-helium stream over ablating graphite (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The nonequilibrium axisymmetric stagnation point boundary layer over an ablating graphite surface is considered. The external stream is a high temperature mixture of hydrogen and helium. Variable thermodynamic and transport properties are assumed. Lennard-Jones potential model is used to calculate the transport coefficients of each species. Although the mixture rules for viscosity of the gas mixture are used, the weighting functions are more sophisticated than those commonly employed. For the conductivity of the mixture, generalized Wassiljewa coefficients are used. Seven species with 28 dissociation/recombination reactions are considered. Hansen's model for the dissociation rate constants is employed. The recombination rate constants are obtained by invoking detailed balance principles assisted by the JANAF thermodynamic data and the Hansen-Pearson thermodynamic data for C3.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Acta Astronautica; 1; Mar
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 20
    facet.materialart.
    Unknown
    Microcraters formed in glass by projectiles of various densities (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An experiment was conducted investigating the effect of projectile density on the structure and size of craters in soda lime glass and fused quartz. The projectiles were spheres of polystyrene-divinylbenzene (PS-DVB), aluminum, and iron with velocities between 0.5 and 15 km/sec and diameters between 0.4 and 5 microns. The projectile densities spanned the range expected for primary and secondary particles of micrometer size at the lunar surface, and the velocities spanned the lower range of micrometeoroid velocities and the upper range of secondary projectile velocities. There are changes in crater morphology as the impact velocity increases, and the transitions occur at lower velocities for the projectiles of higher density. The sequence of morphological features of the craters found for PS-DVB impacting soda lime glass for increasing impact velocity, described in a previous work (Mandeville and Vedder, 1971), also occurs in fused quartz and in both targets with the more dense aluminum and iron projectiles. Each transition in morphology occurs at impact velocities generating a certain pressure in the target. High density projectiles require a lower velocity than low-density projectiles to generate a given shock pressure.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Geophysical Research; 79; Aug. 10
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 21
    facet.materialart.
    Unknown
    Effect of wall temperature spatial variations on aerodynamic heating to an actively cooled aircraft (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The design of cooled skin panels, which requires consideration of many parameters such as heat load, skin thickness, panel size, tube spacing, tube size, temperature limits, coolant flow, etc., must minimize weight and thermal stresses. A design procedure for such panels has been developed by Bell Aerospace Company (Helenbrook and Anthony, 1971). This design procedure assumes a uniform heating rate to the panel, i.e., the variation of aerodynamic heating rate due to the cyclic wall temperature distribution, which results from the discrete coolant tube locations in such a panel, has been neglected. This study was made to determine if these variations were sufficiently large to cause variations in aerodynamic heating rate which would require coupling of boundary layer and conductive thermal analysis solutions.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Journal of Aircraft; 11; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 22
    facet.materialart.
    Unknown
    Automatic numerical generation of body-fitted curvilinear coordinate system for field containing any number of arbitrary two-dimensional bodies (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A method for automatic numerical generation of a general curvilinear coordinate system with coordinate lines coincident with all boundaries of a general multi-connected region containing any number of arbitrarily shaped bodies is presented. With this procedure the numerical solution of a partial differential system may be done on a fixed rectangular field with a square mesh with no interpolation required regardless of the shape of the physical boundaries, regardless of the spacing of the curvilinear coordinate lines in the physical field, and regardless of the movement of the coordinate system. Numerical solutions for the lifting and nonlifting potential flow about Joukowski and Karman-Trefftz airfoils using this coordinate system generation show excellent comparison with the analytic solutions. The application to fields with multiple bodies is illustrated by a potential flow solution for multiple airfoils.
    Keywords: AERODYNAMICS
    Type: Journal of Computational Physics; 15; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 23
    facet.materialart.
    Unknown
    Approximate techniques of structural reanalysis (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A study is made of two approximate techniques for structural reanalysis. These include Taylor series expansions for response variables in terms of design variables and the reduced-basis method. In addition, modifications to these techniques are proposed to overcome some of their major drawbacks. The modifications include a rational approach to the selection of the reduced-basis vectors and the use of Taylor series approximation in an iterative process. For the reduced basis a normalized set of vectors is chosen which consists of the original analyzed design and the first-order sensitivity analysis vectors. The use of the Taylor series approximation as a first (initial) estimate in an iterative process, can lead to significant improvements in accuracy, even with one iteration cycle. Therefore, the range of applicability of the reanalysis technique can be extended. Numerical examples are presented which demonstrate the gain in accuracy obtained by using the proposed modification techniques, for a wide range of variations in the design variables.
    Keywords: STRUCTURAL MECHANICS
    Type: Computers and Structures; 4; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 24
    facet.materialart.
    Unknown
    Analysis of propagation of waves of acoustic frequencies in curved ducts (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The propagation of waves of acoustic frequencies in curved ducts of rectangular cross section is studied for the first four modes. The analysis makes use of Bessel functions of the order (n + 1/2) to construct curves of wavenumber in the duct versus imposed wavenumber and to determine the profile of vibrational velocities. A wide range of duct widths and unrestricted radii of curvature have been considered. The characteristics of motion in a bend are compared with propagation of waves in a straight duct, and important differences in the behavior of waves are noted.
    Keywords: AERODYNAMICS
    Type: Acoustical Society of America; vol. 56
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 25
    facet.materialart.
    Unknown
    Axial flow measurements in trailing vortices (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A scanning laser Doppler velocimeter was used to measure the axial velocity defect in the cores of trailing vortices behind a lifting airfoil of rectangular planform. Data were obtained at several different angles of attack and downstream distances ranging from 30 to 1000 chord lengths. The test was designed to obtain continuous data from the near field into the far field while removing uncertainties associated with the interpretation of data obtained by the hydrogen bubble technique. The measured velocities of V sub x/U sub infinity are compared with those predicted. The agreement is remarkably good over the entire range of downstream distances, which supports the credibility of calculating axial velocities using the results of Moore and Saffman (1973).
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 12; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 26
    facet.materialart.
    Unknown
    Vortex measurements behind a swept wing transport model (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A backscatter laser Doppler velocimeter which simultaneously senses the axial and the tangential components of the velocity has been used to measure the velocity distributions in the near wake of a swept wing semispan transport model in a wind tunnel. The model configuration included nacelles, pylons, antishock bodies, and wing flaps which could be deflected 27 deg. Typical wake vortex velocity profiles are presented for the flaps-retracted and the flaps-deployed 27 deg configurations, respectively.
    Keywords: AERODYNAMICS
    Type: Journal of Aircraft; 11; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 27
    facet.materialart.
    Unknown
    Finite-amplitude thermal convection in a spherical shell (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The properties of finite-amplitude thermal convection for a Boussinesq fluid contained in a spherical shell are investigated. All nonlinear terms are retained in the equations, and both axisymmetric and nonaxisymmetric solutions are studied. The velocity is expanded in terms of poloidal and toroidal vectors. Spherical surface harmonics resolve the horizontal structure of the flow, but finite differences are used in the vertical. With a few modifications, the transform method developed by Orszag (1970) is used to calculate the nonlinear terms, while Green's function techniques are applied to the poloidal equation and diffusion terms.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Journal of Fluid Mechanics; 63; May 15
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 28
    facet.materialart.
    Unknown
    Static, stability, and dynamic analysis of shells of revolution by numerical integration - A comparison (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Recent innovations in digital computer technology have enabled engineers to analyze shell structures of complex configurations without unduly restrictive approximations. An attempt is made to compare the various programs now generally available from the point of view of the advantages of the relative technique utilized, as well as the programmed state of the art. Many of the comparisons are based on the sample problems solved by the STARS-2 system of programs. These examples indicate both the structural detail which can be analyzed by, and the analytical capabilities available in, the numerical shell-of-revolution programs. All advantages and differences are demonstrated by use of solutions for realistic shell problems in the areas of statics, stability, vibrations, and dynamic response of shells subjected to time-dependent loadings.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 29
    facet.materialart.
    Unknown
    Forced vibrations of multi-component compliant tanks and feedlines (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An analytical and experimental research program was performed to investigate the effects of flexible tanks and lines and the total system dynamic response of a simple physical system which had some of the essential features of a liquid-fueled launch vehicle. Several vessel-wall materials were used to obtain a range of elastic moduli. Water was used to simulate the fuel and an electromagnetic shaker provided external excitation such as might originate from a rocket-propulsion system. Experimental data were compared to values obtained from mathematical models for the many degree-of-freedom lumped-mass representation.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 30
    facet.materialart.
    Unknown
    On the propagation velocity of a detonation-shock combined wave (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A quasi-one-dimensional analysis and a generalized Chapman-Jouguet condition are developed for a gaseous free detonation in an inert environment. Two characteristic features derived from the results are that there exists a lower limit on the heat of combustion, the charge diameter, and the molecular weight of the ambient gas and that there are two propagation velocities for a parameter combination above a certain critical value. Therefore the detonation failure of a free gas column is a hydrodynamic rather than a chemical phenomenon.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Zeitschrift fuer angewandte Mathematik und Mechanik; 54; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 31
    facet.materialart.
    Unknown
    Nonproportional loading limit for structures (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The design of most structures involves ensuring integrity for several independent loading conditions. Often, it is rational to design these, exploiting the ductility of the materials to reduce structural costs. Then, ensuring integrity evokes the need for nonmonotonic limit analyses. A groundwork is laid for implementing these analyses. An alternate limit load characterization to that of Greenberg is provided, a mathematical statement of the problem leading to both monotonic (proportional) and nonmonotonic limit loads values is formulated, a direct limit load analysis procedure for analysis within a finite-element framework is described, and limit loads for sets of simple structures are evaluated. A direct limit analysis process is described, and monotonic limit loads are characterized. The process furnishes 'exact' values of limit loads with increasing efficiency as the number of structural elements and force redundancy decreases. Tests show that the accuracy of predicting nonmonotonic limit loads is very sensitive to the number of degrees of freedom in the analysis compared with the total number in the model.
    Keywords: STRUCTURAL MECHANICS
    Type: Computers and Structures; 4; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 32
    facet.materialart.
    Unknown
    Swept-slot film-cooling effectiveness in hypersonic turbulent flow (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Measurement results are presented for the surface equilibrium temperature downstream of swept slots, with sonic tangential air injection into a thick hypersonic turbulent boundary layer. These results are compared with unswept slot results for cooling effectiveness.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Journal of Spacecraft and Rockets; 11; May 1974
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 33
    facet.materialart.
    Unknown
    Mean flow development and surface heating for an attaching compressible free shear layer (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Journal of Spacecraft and Rockets; 11; May 1974
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 34
    facet.materialart.
    Unknown
    Shock shapes of blunt bodies in hypersonic helium, air, and CO2 flows (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A primary factor governing hypersonic flowfield characteristics of blunt vehicles entering planetary atmospheres is the normal shock density ratio. Hence, a means of duplicating or simulating the high density ratios experienced during planetary entry is needed. One facility having the capability of generating a range of hypersonic-hypervelocity flow conditions in arbitrary test gases is the expansion tube. Preliminary shock shape results obtained in the Langley 6-in. expansion tube at hypersonic conditions are presented. Normal shock density ratios from approximately 4 to 19 were generated using helium, air, and CO2 test gases at freestream velocities from 5 to 7 km/sec. Test models were a flat-faced cylinder and the Viking aeroshell.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 12; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 35
    facet.materialart.
    Unknown
    Adhesive fracture mechanics (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: In studies of fracture mechanics the adhesive fracture energy is regarded as a fundamental property of the adhesive system. It is pointed out that the value of the adhesive fracture energy depends on surface preparation, curing conditions, and absorbed monolayers. A test method reported makes use of a disk whose peripheral part is bonded to a substrate material. Pressure is injected into the unbonded central part of the disk. At a certain critical pressure value adhesive failure can be observed. A numerical stress analysis involving arbitrary geometries is conducted.
    Keywords: STRUCTURAL MECHANICS
    Type: International Journal of Fracture; 10; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 36
    facet.materialart.
    Unknown
    Computation of transonic flow about lifting wing-cylinder combinations (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Some results are described for a lifting rectangular wing centrally located on a circular-cylindrical body. This simple configuration has been utilized in order to assess the merits of a mapping technique for wing-body configurations. The procedure employed makes use of a coordinate transformation to simplify specification of the surface boundary condition in the computation of the flow about the wing. The method can be extended to incorporate wing sweep, finite length body of noncircular cross section, and arbitrary wing placement; however, these extensions involve a considerable increase in complexity of the problem.
    Keywords: AERODYNAMICS
    Type: Journal of Aircraft; 11; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 37
    facet.materialart.
    Unknown
    A vortex entrainment model applied to slender delta wings (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A mathematical model of the vortex flow over a slender sharp-edged delta wing is proposed, and is shown to provide good agreement with the experiment. Although the technique requires experimental data in the form of the vortex core locations, it does account for the previously ignored mass entrainment of the vortex core.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 12; Jan. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 38
    facet.materialart.
    Unknown
    Extraction of derivatives from flight data for several aircraft, using the LRC interactive computer system (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Results are presented of a procedure for estimating stability and control parameters from flight data, by using maximum likelihood methods employing an interactive computer system, which was established at the NASA Langley Research Center. Problems encountered are discussed.
    Keywords: AERODYNAMICS
    Type: Parameter Estimation Tech. and Appl. in Aircraft Flight Testing; p 49-76
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 39
    facet.materialart.
    Unknown
    Identification of aircraft stability and control derivatives in the presence of turbulence (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A maximum likelihood estimator for a linear system with state and observation noise is developed to determine stability and control derivatives from flight data obtained in the presence of turbulence. The formulation for the longitudinal short-period mode is presented briefly, including a special case that greatly simplifies the problem if the measurement noise on one signal is negligible. The effectiveness and accuracy of the technique are assessed by applying it first to simulated flight data, in which the true parameter values and state noise are known, then to actual flight data obtained in turbulence. The results are compared with data obtained in smooth air and with wind-tunnel data. The complete maximum likelihood estimator, which accounts for both state and observation noise, is shown to give the most accurate estimate of the stability and control derivatives from flight data obtained in turbulence. It is superior to the techniques that ignores state noise and to the simplified method that neglects the measurement noise on the angle-of-attack signal.
    Keywords: AERODYNAMICS
    Type: Parameter Estimation Tech. and Appl. in Aircraft Flight Testing; p 77-114
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 40
    facet.materialart.
    Unknown
    A comparison of two methods of extracting stability derivatives from flight test data (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Two methods for extracting stability derivatives from flight data are compared. A modified Newton-Raphson quasilinearization minimization technique and a digital-analog (hybrid) matching technique were used to analyze the same data maneuvers obtained from two aircraft. About 70 maneuvers from an F-111E aircraft were analyzed over a Mach number range of 0.3 to 2.0 and an angle of attack range of 3 to 19 degrees. About 20 maneuvers were analyzed for the X-24A lifting body at Mach numbers of 0.5, 0.8, and 0.9, and an angle of attack range of 4 to 13 degrees. Stability derivatives were extracted from these maneuvers and the results from the two techniques, along with wind tunnel results, were compared.
    Keywords: AERODYNAMICS
    Type: NASA. Flight Res. Center Parameter Estimation Tech. and Appl. in Aircraft Flight Testing; p 43-48
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 41
    facet.materialart.
    Unknown
    New triangular plate-bending finite element with transverse shear flexibility (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 12; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 42
    facet.materialart.
    Unknown
    Correlation for estimating vortex rotational velocity downstream dependence (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Description of a correlation, derived from water tank measurements in the wake of wings towed under water, that makes it possible to predict the downstream distance behind an aircraft in flight where its trailing vortex will begin to decay. Comparisons of measured and predicted data are discussed.
    Keywords: AERODYNAMICS
    Type: Journal of Aircraft; 11; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 43
    facet.materialart.
    Unknown
    Roll-up of aircraft trailing vortices using artificial viscosity (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The artificial viscosity method of Kuwahara and Takami (1973) is used to calculate the roll-up of trailing vortices behind a number of practical aerodynamic configurations. Where possible, the results are compared for core location with available experimental data.
    Keywords: AERODYNAMICS
    Type: Journal of Aircraft; 11; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 44
    facet.materialart.
    Unknown
    Evolution of the heat transfer and flow in moderately short turbulent boundary layers in severe pressure gradients (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: International Journal of Heat and Mass Transfer; 17; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 45
    facet.materialart.
    Unknown
    Influence of ablation impurities on blunt body re-entry ionization (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Electron density profiles which include the effect of an ablated sodium impurity were computed for the boundary layer on a blunt-nosed body re-entering the atmosphere at 7.62 km/sec. Profiles are computed from the nose to a distance of four diameters along the RAM C-payload. A finite-difference, laminar, nonequilibrium chemistry boundary-layer program was used. Comparison of theory with S-band diagnostic antenna results, electron concentration deduced from X- and C-band attenuation data, and Langmuir probe data at several different aft body locations show that agreement is good at high altitude. At the lower altitudes there is disagreement between theory and S-band antenna data where the apparent discrepancy is attributed to the three-body recombination rate constant used for deionization of sodium coupled with the effect of angle of attack.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 12; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 46
    facet.materialart.
    Unknown
    Interactive design of large end rings on stiffened conical shells using composites (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Design study methods and results for a composite reinforced base ring for the conical aeroshell structure of the planetary lander vehicle for Project Viking, an unmanned mission to Mars, are presented. The aeroshell is a ring and stringer-stiffened conical shell structure having a half angle of 70 degrees with a large base ring mounted at the outer edge of the cone and a large pay-load ring in the interior with many smaller rings spaced along the inside shell surface. The purpose of the structure is to develop the aerodynamic drag required to decelerate the lander in the Mars atmosphere to facilitiate a soft landing. The design of a shell structure of this complexity requires the use of the latest technology available in a large general-purpose shell buckling program. The large general-purpose non-linear shell buckling program (BOSOR 2) which was used for this purpose is described.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 47
    facet.materialart.
    Unknown
    Aerodynamic heat transfer to RSI tile surfaces and gap intersections (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Review of the results of aerothermal heating tests of a simulated reusable surface insulation (RSI) tile array, performed on the sidewall of a Mach-10 hypersonic tunnel. In particular, the heating characteristics of the tile array, such as they result from heating inside the tile-expansion-space providing gaps between individual tiles, are investigated. The results include the finding that heating on the upstream face of a tile is strongly affected by the interacting longitudinal gap flow.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Journal of Spacecraft and Rockets; 11; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 48
    facet.materialart.
    Unknown
    Nonlinear unsteady contact heat conduction of two-layer shells in the presence of thermal radiation (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A technique is proposed for calculating the complex heat transfer of mated shells with the surrounding medium which also takes into account the temperature dependence of the contact thermal resistance between the shells. This technique can be used for thermal calculations and for calculations of the temperature stresses in two-layer space structure shells.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Space Studies in the Ukraine, No. 1 (NASA-TT-F-15535); p 169-177
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 49
    facet.materialart.
    Unknown
    Radiative cooling of bodies of arbitrary shape and variable volume in vacuum (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: On the basis of joint application of the Tolubinskii integral method and the perturbation method, the asymptotic unsteady temperature distribution is constructed for a region of arbitrary shape on the moving boundary of which there are located nonlinear heat sinks (sources), describing radiative cooling in a medium with zero temperature (in a vacuum).
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Space Studies in the Ukraine, No. 1 (NASA-TT-F-15535); p 160-168
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 50
    facet.materialart.
    Unknown
    Heat transfer with nucleate boiling of liquids under weak mass force field conditions (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The motion is examined of a vapor bubble growing and rising from a flat horizontal heater in the ideal fluid approximation and taking drag into account. Estimates are given of bubble lifetime, bubble radius at detachment, bubble detachment frequency, and time for the bubble to attain a constant rate of rise. The relations obtained for the microcharacteristics of the boiling process are used to determine the coefficients of heat transfer in developed nucleate boiling. A new form of the equations for describing heat transfer in nucleate boiling in dimensionless parameters is proposed.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Space Studies in the Ukraine, No. 1 (NASA-TT-F-15535); p 131-159
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 51
    facet.materialart.
    Unknown
    Thermocapillary convection in weightless condition (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Results are presented of studies on thermocapillary instability of a liquid in a spherical layer with free surface and convection in a rectangular channel with horizontal temperature gradient. It is shown that in vessels partly filled with a viscous incompressible fluid and under essentially weightless conditions free convection may arise due to the surface tension temperature dependence.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Space Studies in the Ukraine, No. 1 (NASA-TT-F-15535); p 121-130
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 52
    facet.materialart.
    Unknown
    Transient cooling of solid bodies of classical form by radiation (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An approximate analytic method is presented for analysis of the unsteady process of radiative cooling of solid bodies of classical form. The nonlinear heat transfer problem is solved by the cascade linearization technique with use of the iteration method. Comparison of the results obtained even in the first approximation with the available numerical solutions indicates adequate engineering accuracy of the proposed technique.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Space Studies in the Ukraine, No. 1 (NASA-TT-F-15535); p 113-120
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 53
    facet.materialart.
    Unknown
    Thermal regime and temperature stresses in bodies during thermoradiational heating (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An approach is developed to the application of the perturbation method for the solution of problems with essential external nonlinearities, based on identification in the boundary condition of a small nonlinear complex which is considered a perturbing function. The solutions obtained in the first approximation with error of 1 to 2% in calculating the unsteady temperature fields are then used to determine the temperature stresses and deformations in solid bodies of classical form.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: Space Studies in the Ukraine, No. 1 (NASA-TT-F-15535); p 88-98
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 54
    facet.materialart.
    Unknown
    Some after-dinner reflections on system identification (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The growth of the field of system identification is discussed along with changes in methodology which have taken place in recent years. The similarity between pattern recognition and system identification is pointed out, involving the modelling in the latter and the feature selection problem in the former. It is stated that once a model is formulated, including the disturbances and measurement errors, the parameter finding can be formulated as a statistical estimation problem. The various techniques and their application are discussed.
    Keywords: AERODYNAMICS
    Type: NASA. Flight Res. Center Parameter Estimation Tech. and Appl. in Aircraft Flight Testing; p 381-385
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 55
    facet.materialart.
    Unknown
    Systems identification - reprise and projections (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A state-of-the-arts review is given for the field of system identification. Progress in the field is traced from the early models of dynamic systems by Sir Isaac Newton up to the present day use of advanced techniques for numerous applications.
    Keywords: AERODYNAMICS
    Type: Parameter Estimation Tech. and Appl. in Aircraft Flight Testing; p 375-379
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 56
    facet.materialart.
    Unknown
    A new criterion for modeling systems (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The criterion that is proposed is an expected value of the mean square response error as an alternative to testing a model against new data. Modeling with respect to this new criterion does not change the estimate for a given model format from a maximum likelihood estimate or mean square response error estimate. The new criterion does, however, provide a means of comparing models with different formats and varying complexity. A numerical example is used to illustrate the application of the proposed criteria and the problem of searching for the best model. For all but the most trivial system identification problems, it is shown that a prohibitive number of combinations of terms of the model must be investigated to ensure the final model is best.
    Keywords: AERODYNAMICS
    Type: Parameter Estimation Tech. and Appl. in Aircraft Flight Testing; p 291-313
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 57
    facet.materialart.
    Unknown
    Effects of flight instrumentation errors on the estimation of aircraft stability and control derivatives (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An error analysis program based on an output error estimation method was used to evaluate the effects of sensor and instrumentation errors on the estimation of aircraft stability and control derivatives. A Monte Carlo analysis was performed using simulated flight data for a high performance military aircraft, a large commercial transport, and a small general aviation aircraft for typical cruise flight conditions. The effects of varying the input sequence and combinations of the sensor and instrumentation errors were investigated. The results indicate that both the parameter accuracy and the corresponding measurement trajectory fit error can be significantly affected. Of the error sources considered, instrumentation lags and control measurement errors were found to be most significant.
    Keywords: AERODYNAMICS
    Type: Parameter Estimation Tech. and Appl. in Aircraft Flight Testing; p 261-280
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 58
    facet.materialart.
    Unknown
    Nonlinear parameter identification: Ballistic range experience applicable to flight testing (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The parameter identification scheme being used is a differential correction least squares procedure (Gauss-Newton method). The position, orientation, and derivatives of these quantities with respect to the parameters of interest (i.e., sensitivity coefficients) are determined by digital integration of the equations of motion and the parametric differential equations. The application of this technique to three vastly different sets of data is used to illustrate the versatility of the method and to indicate some of the problems that still remain.
    Keywords: AERODYNAMICS
    Type: Parameter Estimation Tech. and Appl. in Aircraft Flight Testing; p 191-195
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 59
    facet.materialart.
    Unknown
    Boundary value problems with incremental plasticity in granular media (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Discussion of the critical state concept in terms of an incremental theory of plasticity in granular (soil) media, and formulation of the governing equations which are convenient for a computational scheme using the finite element method. It is shown that the critical state concept with its representation by the classical incremental theory of plasticity can provide a powerful means for solving a wide variety of boundary value problems in soil media.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 60
    facet.materialart.
    Unknown
    A solution to the contact of two rough spherical surfaces (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The influence of roughness on the interfacial pressure distribution in the contact of two spherical surfaces is considered. An approximate general solution is presented and it is shown that the pressure for all radii can be determined solely from a reference pressure which is, in turn, a function of two parameters - a dimensionless roughness and a dimensionless hardness. Values for the radius of contact are also presented.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 61
    facet.materialart.
    Unknown
    Aerodynamics of jet flap and rotating cylinder flap STOL concepts (1974)
    In:  CASI
    Details
    Publication Date: 2012-05-22
    Description: The aerodynamic effectiveness of various propulsive lift concepts to provide for the low speed performance and control required for short takeoff and landing aircraft is discussed. The importance of the interrelationship between the propulsion system and aerodynamic components of the aircraft is stressed. The relative effectiveness of different lift concepts was evaluated through static and wind tunnel tests of various aerodynamic models and propulsion components, simulations of aircraft, and in some cases, flight testing of research aircraft incorporating the concepts under study. Results of large scale tests of lift augmentation devices are presented. The results of flight tests of STOL research aircraft with augmented jet flaps and rotating cylinder flaps are presented to show the steeper approach flight paths at low forward speeds.
    Keywords: AERODYNAMICS
    Type: AGARD V/STOL Aerodyn.; 6 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 62
    facet.materialart.
    Unknown
    Mixed mode stress field effect in adhesive fracture (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Numerical or analytical analyses were performed on seven different test specimens including blister test, 90-degree peel test, torsion test, and various cone tests. These specimens are in general subjected to complex stress fields having various amounts of Mode I, Mode II, and Mode III loads. The specimens were then constructed using polymethyl methacrylate for the adherends and a transparent polyurethane elastomer (Solithane 113) for the adhesive. This combination permitted direct observation of the bondline as load was applied. Although initial debonds as well as bond end termination singularities were present in all specimens, in some cases the debond did not initiate at the singularity points as would normally have been expected. An explanation for this behavior is presented, as well as a comparison of loading mode effect on those specimens for which the debond did propagate from a bond terminus singular point.
    Keywords: STRUCTURAL MECHANICS
    Type: International Journal of Fracture; 10; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 63
    facet.materialart.
    Unknown
    Dependence of plate-bending finite element deflections and eigenvalues on Poisson's ratio (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 12; Oct. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 64
    facet.materialart.
    Unknown
    A generalized-capacity-matrix technique for computing aerodynamic flows (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A numerical generalized-capacity-matrix technique is developed for application to aerodynamic flow computations. This technique allows the very fast direct (noniterative) numerical elliptic solvers to be used in problems with arbitrary internal boundaries and with a wide class of boundary conditions, including numerical application of the Kutta condition on an airfoil without iteration. Accuracy, speed, and usefulness of the technique are demonstrated with linear problems for potential flows over airfoil shapes. The method's main advantages, however, can be exploited within iterative procedures for a variety of complex flow problems governed by systems of equations not necessarily elliptic or linear.
    Keywords: AERODYNAMICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 65
    facet.materialart.
    Unknown
    Fast direct numerical solution of the nonhomogeneous Cauchy-Riemann equations (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A fast direct (noniterative) 'Cauchy-Riemann Solver' is developed for solving the finite-difference equations representing systems of first-order elliptic partial differential equations in the form of the nonhomogeneous Cauchy-Riemann equations. The method is second-order accurate and requires approximately the same computer time as a fast cyclic-reduction Poisson solver. The accuracy and efficiency of the direct solver are demonstrated in an application to solving an example problem in aerodynamics: subsonic inviscid flow over a biconvex airfoil. The analytical small-perturbation solution contains singularities, which are captured well by the computational technique. The algorithm is expected to be useful in nonlinear subsonic and transonic aerodynamics.
    Keywords: AERODYNAMICS
    Type: Journal of Computational Physics; 15; May 1974
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 66
    facet.materialart.
    Unknown
    Estimation of longitudinal aerodynamic coefficients and comparison with wind-tunnel values (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Some recent experience at Ames Research Center in the estimation of aerodynamic coefficients for the Lear-Jet and the Augmentor Wing Jet STOL Research Aircraft is reviewed. The coefficients estimated from flight data are compared with values based on large-scale wind-tunnel tests. The results obtained by the regression and quasilinearization identification techniques are also compared. The regression method generally provides the lower standard deviation in the coefficient estimates and provides the better fit to the wind-tunnel values. The addition of nonlinear terms in the aerodynamic equations decreases the difference between the estimated and measured time histories but also increases the standard deviation in the estimated coefficient values.
    Keywords: AERODYNAMICS
    Type: Parameter Estimation Tech. and Appl. in Aircraft Flight Testing; p 125-148
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 67
    facet.materialart.
    Unknown
    Fracture initiation and propagation in a cylindrical shell containing an initial surface flaw (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An attempt is made to provide the necessary analytical tools for the application of two different types of fracture criteria to shell structures. Of particular interest is the problem of fracture propagation and arrest in a cylindrical pressure vessel containing an initial surface flaw. It is assumed that the flaw has the most unfavorable geometry and orientation, namely, it is a crack lying on a meridional plane. Stress intensity factor for a part-through crack, and a surface or internal crack with a fully yielded net ligament are considered. Attention is given to constant delta curves for depressurization studies and to depressurization and crack arrest in pressure vessels.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 68
    facet.materialart.
    Unknown
    Vortex-induced heating to cone flaps at Mach 6 (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Discussion of the local heating effect on the lee-side control flaps of supersonic configurations due to the interaction between vortices and leeward control surfaces at an angle of attack. Considerations are given for an appropriate positioning of control flaps to alleviate such interactions and the resulting thermal effect. Tests are carried out on a sharp right circular cone with two types of flap configurations in a study of oil flow patterns about the cone at selected angles of attack. Splitting of flaps and moving them to positions away from the symmetry plane did reduce the heating but also reduced the average flap pressure and increased flow complexity.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 11; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 69
    facet.materialart.
    Unknown
    An improved static probe design (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A new static probe design is described in which the static holes are located much closer to the tip than in conventional probes. The new probe shows promise for use in some situations where conventional probes become highly inaccurate. An additional advantage of the new design is that, when used in static pressure survey rakes, the probes can be located much closer together than in conventional designs and still ensure that disturbances from neighboring probe tips do not affect the static readings.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 12; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 70
    facet.materialart.
    Unknown
    Vortex-induced heating to a cone-cylinder body at Mach 6 (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Presented data on vortex-induced heating in a cone-cylinder body at Mach 6 show that the most severe heating need not occur as a result of the interaction of the primary vortices with the lee surface, even though this interaction produces a large, well-defined featherline oil smear. It is pointed out that the severity of vortex-induced heating is extremely sensitive to Reynolds number and geometry and that there exists a 'threshold Reynolds number' below which vortex-induced heating decreases abruptly.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 11; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 71
    facet.materialart.
    Unknown
    Simulation of real-gas effects for Mars entry (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The changes in aerodynamic characteristics due to real-gas effects associated with high speed flight (characterized by large shock density ratios) are primarily the result of changes in surface pressures acting on the forebody. The surface pressures are affected by a change in shock density ratio (real-gas effects) in two ways. First, the level of pressure at the stagnation point relative to freestream dynamic pressure is changed, and second, the distribution of surface pressure relative to stagnation-point pressure is changed. The density-ratio effect on the stagnation point pressure level can be estimated by considering the flow of a perfect gas about a blunt body.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 11; Jan. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 72
    facet.materialart.
    Unknown
    V/STOL aerodynamics: A review of the technology (1974)
    In:  CASI
    Details
    Publication Date: 2012-05-22
    Description: An analysis of the development and technological applications of V/STOL aircraft is presented. The use of V/STOL aircraft to overcome the limitations of conventional aircraft is discussed. The aspects of V/STOL aircraft which are considered are: (1) economic penalties of propulsive lift, (2) advantages of propulsive lift, (3) potential improvements in V/STOL aircraft, (4) the aerodynamics of V/STOL aircraft, and (5) proposals for additional research in V/STOL development.
    Keywords: AERODYNAMICS
    Type: AGARD V/STOL Aerodyn.; 13 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 73
    facet.materialart.
    Unknown
    An overview of high temperature metal fatigue: Aspects covered by the 1973 International Conference on Creep and Fatigue (1974)
    In:  CASI
    Details
    Publication Date: 2012-05-22
    Description: A summary of papers is presented which covers the following broad aspects of high temperature metal fatigue: (1) materials development and characterization; (2) environmental factors, including air, vacuum, helium, iodine, sodium, and radiation environments; (3) general fatigue life relationships; (4) crack growth laws; (5) design code activities; and (6) design and service experience. Illustrative tables accompany the summary.
    Keywords: STRUCTURAL MECHANICS
    Type: AGARD Low Cycle High Temp. Fatigue; 47 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 74
    facet.materialart.
    Unknown
    A general purpose stabilised balloon platform (1974)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The development of a three axis stabilized balloon platform capable of being operated in three modes of increasing accuracy is discussed. The system relies on angular motion sensing for primary feedback with linear accelerometers, magnetometers, and a star sensor for positional information. When under primary control the system will acquire and stabilize on any accessible part of the celestial sphere. A video verification system is included to provide pointing confirmation. Under improved accuracy control, the star sensor is used to lock onto a target star.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Telescope Systems for Balloon-Borne Res.; p 284-293
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 75
    facet.materialart.
    Unknown
    Air Force Cambridge Research Laboratories balloon operations (1974)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The establishment and functions of the AFCRL balloon operations facility are discussed. The types of research work conducted by the facility are defined. The facilities which support the balloon programs are described. The free balloon and tethered balloon capabilities are analyzed.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Telescope Systems for Balloon-Borne Res.; p 160-164
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 76
    facet.materialart.
    Unknown
    Balloon platform for extended-life astronomy research (1974)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A configuration has been developed for a long-life balloon platform to carry pointing telescopes weighing as much as 80 pounds (36 kg) to point at selected celestial targets. A platform of this configuration weighs about 375 pounds (170 kg) gross and can be suspended from a high altitude super pressure balloon for a lifetime of several months. The balloon platform contains a solar array and storage batteries for electrical power, up and down link communications equipment, and navigational and attitude control systems for orienting the scientific instrument. A biaxial controller maintains the telescope attitude in response to look-angle data stored in an on-board computer memory which is updated periodically by ground command. Gimbal angles are computed by using location data derived by an on-board navigational receiver.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Telescope Systems for Balloon-Borne Res.; p 136-144
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 77
    facet.materialart.
    Unknown
    An orientable, stabilized balloon-borne gondola for around-the-world flights (1974)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A system capable of pointing a balloon-borne telescope at selected celestial objects to an accuracy of approximately 10 arc minutes for an extended period (weeks to months) without reliance on telemetry is described. A unique combination of a sun/star tracker, an on-board computer, and a gyrocompass is utilized for navigation, source acquisition and tracking, and data compression and recording. The possibilities for intelligent activities by the computer are also discussed.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Telescope Systems for Balloon-Borne Res.; p 71-80
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 78
    facet.materialart.
    Unknown
    Identification of structural parameters from helicopter dynamic test data (1974)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A method is presented for obtaining the mass, stiffness, and damping parameters of a linear mathematical model, having fewer degrees of freedom than the structure it represents, directly from dynamic response measurements on the actual helicopter without a priori knowledge of the physical characteristics of the fuselage. The only input information required in the formulation is the approximate natural frequency of each mode and mobility data measured proximate to these frequencies with sinusoidal force excitation applied at only one point on the vehicle. The practicality and numerical soundness of the theoretical development was demonstrated through a computer simulation of an experimental program.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Ames Res. Center Rotorcraft Dyn.; p 239-248
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 79
    facet.materialart.
    Unknown
    Experimental and analytical studies in tilt-rotor aeroelasticity (1974)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: An overview of an experimental and analytical research program underway for studying the aeroelastic and dynamic characteristics of tilt-rotor VTOL aircraft is presented. Selected results from several investigations of scaled models in the transonic dynamics tunnel, as well as some results from a test of a flight-worthy proprotor in the full-scale wind tunnel are shown and discussed with a view toward delineating various aspects of dynamic behavior peculiar to proprotor aircraft. Included are such items as proprotor/pylon stability, whirl flutter, gust response, and blade flapping. Theoretical predictions are shown to be in agreement with the measured stability and response behavior.
    Keywords: AERODYNAMICS
    Type: Its Rotorcraft Dyn.; p 171-184
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 80
    facet.materialart.
    Unknown
    Theory and comparison with tests of two full-scale proprotors (1974)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A nine degrees-of-freedom theoretical model was developed for investigations of the dynamics of a proprotor operating in high inflow axial flight on a cantilever wing. The theory is described, and the results of the analysis are presented for two proprotor configurations: a gimballed, stiff-inplane rotor, and a hingeless, soft-inplane rotor. The influence of various elements of the theory are discussed, including the modeling used for the blade and wing aerodynamics, and the influence of the rotor lag degree of freedom. The results from full-scale tests of the two proprotors are presented and compared with the theoretical results.
    Keywords: AERODYNAMICS
    Type: Its Rotorcraft Dyn.; p 159-169
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 81
    facet.materialart.
    Unknown
    Application of antiresonance theory to helicopters (1974)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Antiresonance theory is the principle underlying nonresonant nodes in a structure, and covers both nonresonant nodes occurring naturally and those introduced by devices such as dynamic absorbers and antiresonant isolators. The dynamic antiresonant vibration isolator (DAVI) and the nodale module are examples of the applications of transfer antiresonances. It is shown that antiresonances are eigenvalues, and that they can be determined by matrix iteration. Applications of antiresonance theory to helicopter engineering problems, using the antiresonant eigenvalue equation are suggested.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Ames Res. Center Rotorcraft Dyn.; p 101-106
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 82
    facet.materialart.
    Unknown
    Correlation of finite-element structural dynamic analysis with measured free vibration characteristics for a full-scale helicopter fuselage (1974)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The correlation achieved with each program provides the material for a discussion of modeling techniques developed for general application to finite-element dynamic analyses of helicopter airframes. Included are the selection of static and dynamic degrees of freedom, cockpit structural modeling, and the extent of flexible-frame modeling in the transmission support region and in the vicinity of large cut-outs. The sensitivity of predicted results to these modeling assumptions are discussed. Both the Sikorsky Finite-Element Airframe Vibration analysis Program (FRAN/Vibration Analysis) and the NASA Structural Analysis Program (NASTRAN) have been correlated with data taken in full-scale vibration tests of a modified CH-53A helicopter.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Ames Res. Center Rotorcraft Dyn.; p 67-80
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 83
    facet.materialart.
    Unknown
    Comparison of the experimental aerodynamic characteristics of theoretically and experimentally designed supercritical airfoils (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: A lifting airfoil theoretically designed for shockless supercritical flow utilizing a complex hodograph method has been evaluated in the Langley 8-foot transonic pressure tunnel at design and off-design conditions. The experimental results are presented and compared with those of an experimentally designed supercritical airfoil which were obtained in the same tunnel.
    Keywords: AERODYNAMICS
    Type: NASA-TM-X-3082 , L-9548 , NAS 1.15:X-3082
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 84
    facet.materialart.
    Unknown
    A study of the nonlinear aerodynamics of bodies in nonplanar motion (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Concepts from the theory of functionals are used to develop nonlinear formulations of the aerodynamic force and moment systems acting on bodies in large-amplitude, arbitrary motions. The analysis, which proceeds formally once the functional dependence of the aerodynamic reactions upon the motion variables is established, ensures the inclusion, within the resulting formulation, of pertinent aerodynamic terms that normally are excluded in the classical treatment. Applied to the large-amplitude, slowly varying, nonplanar motion of a body, the formulation suggests that the aerodynamic moment can be compounded of the moments acting on the body in four basic motions: steady angle of attack, pitch oscillations, either roll or yaw oscillations, and coning motion. Coning, where the nose of the body describes a circle around the velocity vector, characterizes the nonplanar nature of the general motion.
    Keywords: AERODYNAMICS
    Type: NASA-TR-R-421 , A-5057
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 85
    facet.materialart.
    Unknown
    Transonic single-mode flutter and buffet of a low aspect ratio wing having a subsonic airfoil shape (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Transonic flutter and buffet results obtained from wind-tunnel tests of a low aspect ratio semispan wing model are presented. The tests were conducted to investigate potential transonic aeroelastic problems of vehicles having subsonic airfoil sections. The model employed NACA 00XX-64 airfoil sections in the streamwise direction and had a 14 deg leading edge sweep angle. Aspect ratio, and average thickness were 4.0, 0.35, and 8 percent, respectively. The model was tested at Mach numbers from 0.6 to 0.95 at angles of attack from 0 deg to 15 deg. Two zero lift flutter conditions were found that involved essentially single normal mode vibrations. With boundary layer trips on the model, flutter occurred in a narrow Mach number range centered at about Mach 0.90. The frequency and motion of this flutter were like that of the first normal mode vibration. With the trips removed flutter occurred at a slightly high Mach number but in a mode strongly resembling that of the second normal mode.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-TN-D-7346 , A-4966
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 86
    facet.materialart.
    Unknown
    Simple methods for determining the virtual origin of turbulent boundary layers in hypersonic flow on sharp-edged flat plates (1974)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: Two methods for determining the virtual origin of turbulent boundary layers in hypersonic flow are evaluated. The results of the analyses are restricted to wind-tunnel models having sharp-edged surfaces with zero or small pressure gradients. Virtual origin and skin friction estimates from these two methods are compared with values from a base method for which the virtual origin is calculated from the measured momentum thickness at a station downstream of boundary layer transition.
    Keywords: AERODYNAMICS
    Type: ASME PAPER 74-APM-V
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 87
    facet.materialart.
    Unknown
    Transverse vibrations of non-uniform beams (1974)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: The free vibrations of elastic beams with nonuniform characteristics are investigated theoretically by a new method. The new method is seen to combine the advantages of a finite element approach and of a Rayleigh-Ritz analysis. Comparison with the known analytical results for uniform beams shows good convergence of the method for natural frequencies and modes. For internal shear forces and bending moments, the rate of convergence is less rapid. Results from experiments conducted with a cantilevered helicopter blade with strong nonuniformities and also from alternative theoretical methods, indicate that the theory adequately predicts natural frequencies and mode shapes. General guidelines for efficient use of the method are presented.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Sound and Vibration; 37; Dec. 22
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 88
    facet.materialart.
    Unknown
    Full wave modulator-demodulator amplifier apparatus (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A full-wave modulator-demodulator apparatus is described including an operational amplifier having a first input terminal coupled to a circuit input terminal, and a second input terminal alternately coupled to the circuit input terminal. A circuit is ground by a switching circuit responsive to a phase reference signal and the operational amplifier is alternately switched between a non-inverting mode and an inverting mode. The switching circuit includes three field-effect transistors operatively associated to provide the desired switching function in response to an alternating reference signal of the same frequency as an AC input signal applied to the circuit input terminal.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 89
    facet.materialart.
    Unknown
    Heat transfer to surface and gaps of RSI tile arrays in turbulent flow at Mach 10.3 (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Heat transfer to gap walls and surface of a simulated reusable surface insulation (RSI) tile array are presented. The data were obtained in the thick, turbulent tunnel wall boundary layer of the Langley Continuous Flow Hypersonic Tunnel at a freestream Mach number of 10.3 and a freestream unit Reynolds number of one million. Pertinent test variables were: (1) tile array orientation (staggered and in-line), (2) gap width, (3) flow angularity, and (4) tile mismatch.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Type: NASA-TM-X-71945
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 90
    facet.materialart.
    Unknown
    Forward slanted slot throat stability bypass to increase the stable airflow range of a Mach 2.5 inlet with 60 percent internal contraction (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The results of an experimental investigation to increase the stable airflow operating range of a supersonic mixed-compression inlet are presented. Two forward-slanted slot stability-bypass entrance configurations were tested. In terms of diffuser-exit corrected airflow, a large inlet stable airflow range of 18.5 percent was obtained with the superior configuration if a constant pressure was maintained in the bypass plenum. Limited unstart angle-of-attack data are presented.
    Keywords: AERODYNAMICS
    Type: NASA-TM-X-2973 , E-7706
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 91
    facet.materialart.
    Unknown
    Effect of screen-induced total-pressure distortion on axial-flow compressor stability (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An experimental investigation was made to determine the effects of screen-induced total-pressure distortions on two J85-GE-13 turbojet engines. Results were compared to those from a previous program run with a third engine. All compressors were found to be sensitive to a critical angle of circumferential distortion equal to 60 deg., and they all adhered closely to the parallel compressor model. The sensitivity of compressor exit pressure to virtually any type of distortion pattern can be determined by defining stall lines for undistorted, hub radial distorted, and tip radial distorted inflows. The effect of multiple sectors of circumferential distortion is defined.
    Keywords: AERODYNAMICS
    Type: NASA-TM-X-3017 , E-7792
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 92
    facet.materialart.
    Unknown
    Non-linear behavior of fiber composite laminates (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The non-linear behavior of fiber composite laminates which results from lamina non-linear characteristics was examined. The analysis uses a Ramberg-Osgood representation of the lamina transverse and shear stress strain curves in conjunction with deformation theory to describe the resultant laminate non-linear behavior. A laminate having an arbitrary number of oriented layers and subjected to a general state of membrane stress was treated. Parametric results and comparison with experimental data and prior theoretical results are presented.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-CR-2313 , TFR/7309
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 93
    facet.materialart.
    Unknown
    Failure criteria for viscoelastic materials (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Research projects concerned with developing a theory of fracture of materials are discussed. The effects of the geometry of the structure and the loads acting on the structure as they influence the failure process are analyzed. The effects of the viscoelastic deformation characteristics of the bulk elastomer on failure behavior are examined. Additional material parameters which control the fracture process are identified.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-CR-138125 , GALCIT-120
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 94
    facet.materialart.
    Unknown
    Advance development of a technique for characterizing the thermomechanical properties of thermally stable polymers (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The torsional braid experiment has been interfaced with a centralized hierarchical computing system for data acquisition and data processing. Such a system, when matched by the appropriate upgrading of the monitoring techniques, provides high resolution thermomechanical spectra of rigidity and damping, and their derivatives with respect to temperature.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA-CR-138123
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 95
    facet.materialart.
    Unknown
    Bio-isolated dc operational amplifier (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A bio-isolated dc operational amplifier is described for use in making bioelectrical measurements of a patient while providing isolation of the patient from electrical shocks. The circuit contains a first operational amplifier coupled to the patient with its output coupled in a forward loop through a first optic coupler to a second operational amplifier. The output of the second operational amplifier is coupled to suitable monitoring circuitry via a feedback circuit including a second optic coupler to the input of the first operational amplifier.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 96
    facet.materialart.
    Unknown
    Combined Quadrupole-dipole Model for Inlet Flow Distortion Noise from a Subsonic Fan (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A combined quadrupole-dipole model has been developed for the noise generated by inlet flow distortion in a subsonic fan. A formula is derived for the total upstream-radiated acoustic power in each tone as a function of the design parameters of the fan and the properties of the inlet flow distortion. Numerical results are obtained for values of the parameters corresponding to various quiet fans. The analysis is compared with noise measurements taken on a 51-cm (20-in.) diameter research fan as well as with those taken on a number of full-scale fan stages. Fairly good agreement was obtained. It should therefore be possible to use this model to study the noise-reduction potential of the various fan design parameters.
    Keywords: AERODYNAMICS
    Type: NASA-TN-D-7676 , E-7881
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 97
    facet.materialart.
    Unknown
    Low speed aerodynamic characteristics of NACA 6716 and NACA 4416 airfoils with 35 percent-chord single-slotted flaps (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An investigation was conducted in a low-turbulence pressure tunnel to determine the two-dimensional lift and pitching-moment characteristics of an NACA 6716 and an NACA 4416 airfoil with 35-percent-chord single-slotted flaps. Both models were tested with flaps deflected from 0 deg to 45 deg, at angles of attack from minus 6 deg to several degrees past stall, at Reynolds numbers from 3.0 million to 13.8 million, and primarily at a Mach number of 0.23. Tests were also made to determine the effect of several slot entry shapes on performance.
    Keywords: AERODYNAMICS
    Type: NASA-TM-X-2623 , L-8410
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 98
    facet.materialart.
    Unknown
    LC-oscillator with automatic stabilized amplitude via bias current control (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A stable excitation supply for measurement transducers is described. It consists of a single-transistor oscillator with a coil connected to the collector and a capacitor connected from the collector to the emitter. The output of the oscillator is rectified and the rectified signal acts as one input to a differential amplifier; the other input being a reference potential. The output of the amplifier is connected at a point between the emitter of the transistor and ground. When the rectified signal is greater than the reference signal, the differential amplifier produces a signal of polarity to reduce bias current and, consequently, amplification.
    Keywords: THERMODYNAMICS AND COMBUSTION
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 99
    facet.materialart.
    Unknown
    Flight Reynolds number effects on a contoured boattail nozzle at subsonic speeds (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A contoured boattail nozzle typical of those used on a twin-engine fighter was tested on an underwing nacelle mounted on an F-106B aircraft. The gas generator was a J85-GE-13 turbojet engine. The effects of Reynolds number, Mach number, and angle of attack on boattail drag and boattail pressure profiles were investigated. Increasing Reynolds number caused a slight reduction in boattail drag at both Mach 0.7 and 0.9. The nozzle had relatively low boattail drag even though the flow was separated over a large portion of the boattail.
    Keywords: AERODYNAMICS
    Type: NASA-TM-X-3053 , E-7818
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 100
    facet.materialart.
    Unknown
    An Analytical Investigation of Wing-Jet Interaction (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The aerodynamic interaction between the wing and an inviscid jet with Mach number nonuniformity is formulated by using a two-vortex-sheet model for the jet. One of the vortex sheets accounts for the induced jet flow and the other the induced outer flow. No additional source distribution is needed for the jet at an angle of attack. The above problem is solved by satisfying the jet and wing tangency and the jet pressure-continuity conditions and using a quasi vortex lattice method for computing the induced flow field. The latter method is derived through theoretical consideration by properly accounting for singularities present in the equations and possesses the same simplicity and generality as the conventional vortex lattice method but has a better rate of numerical convergence. The resulting system of algebraic equations is solved by Purcell's vector method. The numerical formulation is first applied to the wing-slipstream interaction problem. Results for one centered-jet configuration are compared with those predicted by some existing theories.
    Keywords: AERODYNAMICS
    Type: NASA-CR-138140 , CRINC-FRL-74-001
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...