ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Other Sources  (3,091)
  • FLUID MECHANICS  (1,814)
  • AUXILIARY SYSTEMS  (1,277)
  • Biochemistry and Biotechnology
  • Chemical Engineering
  • General Chemistry
  • 1970-1974  (2,287)
  • 1960-1964  (804)
Collection
Source
Keywords
Years
Year
  • 1
    facet.materialart.
    Unknown
    The Coanda effect in gas-dynamic noise control (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: The principle types of silencers are discussed for gas dynamic noise of free steam and gas expansions, as well as the results of research in gas dynamics of jets and applied acoustics. Gas dynamic noise attenuation by means of the Coanda effect is due to fluid decompression in a Coanda ejector of the external type, where a structural change takes place in the acoustic frequency spectrum and in its direction, as well as a substantial decrease in the fluid's velocity, temperature and concentration. This process is continued in the second phase with absorption of the acoustic waves by means of an active structure.
    Keywords: FLUID MECHANICS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 143-149
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 2
    facet.materialart.
    Unknown
    New diagnostic technique for the study of turbulent boundary-layer separation (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Description of a diagnostic technique for determining the unsteady character of turbulent boundary-layer separation. The technique uses thin platinum films mounted flush with the model surface. Voltages from these films provide measurements related to the flow character above the film. For illustration, results obtained by this technique are presented for the interaction of a hypersonic shock wave and a turbulent boundary layer, with and without separation.
    Keywords: FLUID MECHANICS
    Type: AIAA Journal; 12; Oct. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 3
    facet.materialart.
    Unknown
    Reynolds-shear-stress measurements in a compressible boundary layer within a shock-wave-induced adverse pressure gradient (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: FLUID MECHANICS
    Type: Journal of Fluid Mechanics; 65; Aug. 12
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 4
    facet.materialart.
    Unknown
    Evolution of a moderately short turbulent boundary layer in a severe pressure gradient (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The early and intermediate development of a highly accelerated (or decelerated) turbulent boundary layer is analyzed. For sufficiently large accelerations (or pressure gradients) and for total normal strains which are not excessive, the equation for the Reynolds shear stress simplifies to give a stress that remains approximately constant as it is convected along streamlines. The theoretical results for the evolution of the mean velocity in favourable and adverse pressure gradients agree well with experiment for the cases considered. A calculation which includes mass injection at the wall is also given.
    Keywords: FLUID MECHANICS
    Type: Journal of Fluid Mechanics; 64; July 24
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 5
    facet.materialart.
    Unknown
    Turbulent diffusion with memories and intrinsic shear (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The first part of the present theory is devoted to the derivation of a Fokker-Planck equation. The eddies smaller than the hydrodynamic scale of the diffusion cloud form a diffusivity, while the inhomogeneous, bigger eddies give rise to a nonuniform migratory drift. This introduces an eddy-induced shear which reflects on the large-scale diffusion. The eddy-induced shear does not require the presence of a permanent wind shear and is intrinsic to the diffusion. Secondly, a transport theory of diffusivity is developed by the method of repeated-cascade and is based upon a relaxation of a chain of memories with decreasing information. The full range of diffusion consists of inertia, composite, and shear subranges, for which variance and eddy diffusivities are predicted. The coefficients are evaluated. Comparison with experiments in the upper atmosphere and oceans is made.
    Keywords: FLUID MECHANICS
    Type: Zeitschrift fuer Naturforschung; vol. 29a
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 6
    facet.materialart.
    Unknown
    On numerical methods to impose asymptotic boundary conditions of boundary-layer equations (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The error minimization method proposed by Nachtsheim and Swigert (1965) to satisfy the asymptotic boundary conditions of boundary layer equations is proved to be equivalent to imposing the condition of fastest decay. As a consequence, a uniqueness problem is not arising in the solutions of boundary layer equations obtained by their method.
    Keywords: FLUID MECHANICS
    Type: Computers and Fluids; 2; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 7
    facet.materialart.
    Unknown
    Method for producing a uniform, low Reynolds number jet (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: In one attempt to produce a simple inexpensive nozzle, a 2-in. diam plate with 37 holes was investigated (Stadler, 1960), anticipating that the small jets emanating from the plate would combine to form a uniform stream. This experiment was unsuccessful because a uniform flow was not established until the flow had progressed many nozzle diameters downstream. However, an extension of this concept to a much larger number of very small jets, viz., a porous plate, did provide a method for producing a uniform, low Reynolds number jet almost immediately downstream of the nozzle (Greene, 1973). The method is described and some typical jet velocity profiles for nozzle Reynolds numbers from 50 to 1000 are given.
    Keywords: FLUID MECHANICS
    Type: Journal of Spacecraft and Rockets; 11; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 8
    facet.materialart.
    Unknown
    Approach to the origin of turbulence on the basis of two-point kinetic theory (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Equations for the fluctuation correlation in an incompressible shear flow are derived on the basis of kinetic theory, utilizing the two-point distribution function which obeys the BBGKY hierarchy equation truncated with the hypothesis of 'ternary' molecular chaos. The step from the molecular to the hydrodynamic description is accomplished by a moment expansion which is a two-point version of the thirteen-moment method, and which leads to a series of correlation equations, viz., the two-point counterparts of the continuity equation, the Navier-Stokes equation, etc. For almost parallel shearing flows the two-point equation is separable and reduces to two Orr-Sommerfeld equations with different physical implications.
    Keywords: FLUID MECHANICS
    Type: Physics of Fluids; 17; Jan. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 9
    facet.materialart.
    Unknown
    Computation of steady nozzle flow by a time-dependent method (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The equations of motion governing steady, inviscid flow are of a mixed type, that is, hyperbolic in the supersonic region and elliptic in the subsonic region. These mathematical difficulties may be removed by using the so-called time-dependent method, where the governing equations become hyperbolic everywhere. The steady-state solution may be obtained as the asymptotic solution for large time. The object of this research was to develop a production type computer program capable of solving converging, converging-diverging, and plug two-dimensional nozzle flows in computational times of 1 min or less on a CDC 6600 computer.
    Keywords: FLUID MECHANICS
    Type: AIAA Journal; 12; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 10
    facet.materialart.
    Unknown
    Flow properties in expansion tube with helium, argon, air, and CO2 (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Test flow velocities from 5 to 7 km/sec were generated in a 6-in. expansion tube using helium, argon, air, and CO2 test gases. Pitot pressure profiles across the flow at the test section are presented for the four test gases, and measured flow quantities are compared to computer predicted values. Comparison of predicted and measured flow quantities suggests the expansion to be near thermochemical equilibrium for all test gases and implies the existence of a totally reflected shock at the secondary diaphragm. Argon, air, and CO2 flows were observed to attenuate while traversing the acceleration section, whereas no attenuation was observed for helium.
    Keywords: FLUID MECHANICS
    Type: AIAA Journal; 12; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 11
    facet.materialart.
    Unknown
    Non-equilibrium ionized blast wave (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The structure of a cylindrical blast wave with ionization at non-LTE conditions was calculated using equations previously developed by Wu and Fu (1970). The degree of ionization was predicted by a modified Saha equation. Temperature profiles show that the temperature at non-LTE conditions is lower than at LTE near the shock front. This corresponds to a higher degree of ionization for the non-LTE limit, which indicates that the neutral gas absorption is much more efficient at non-LTE than at the LTE limit. The decaying velocity under non-LTE is approximately 15% less than under LTE.
    Keywords: FLUID MECHANICS
    Type: Physical Society of Japan; vol. 36
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 12
    facet.materialart.
    Unknown
    Remarks on the decay of homogeneous turbulence from a given state (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A previous theory which did not require a usual closure assumption required three or more initial spectra. By allowing a simple physical assumption (a modification of Kovasznay's (1948) hypothesis), the required number of spectra is reduced to two. Agreement with experiment is good.
    Keywords: FLUID MECHANICS
    Type: Physics of Fluids; 17; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 13
    facet.materialart.
    Unknown
    Progress and problems in erosion prediction (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Methods for predicting erosion resulting from repeated localized impulsive loadings, such a impacts from droplets or in cavitation flow from microjets and bubbles, are examined. The parameters which determine the adequacy of a component to resist the loads put upon it are identified. The development of erosion rate models is discussed. The expected accuracy of the prediction and the sources of error are analyzed.
    Keywords: FLUID MECHANICS
    Type: NBS The Role of Cavitation in Mech. Failure; p 107-114
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 14
    facet.materialart.
    Unknown
    Effects of viscoelasticity on cavitation in drag reducing fluids (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: To study cavitation inception in polymer solutions, a blow-down water tunnel with short running times was used. Tests were made using 1/4 and 1/2 inch diameter models of hemispherical-nose cylinders. To accurately detect the inception of cavitation, a reliable technique was developed using a continuously operating He-Ne gas laser. The laser beam was adjusted to grazing incidence with the model at the minimum pressure point where cavitation inception was to be expected. A sensitive photocell was placed at ninety degrees to detect the beam. As incipient cavitation occurred, the bubbles caused scattering of the laser beam which was picked up by the photocell. Static pressure near the model in the working section of the tunnel was measured using a solid-state pressure pick-up. The signals from the photocell and the pressure pick-up were recorded on an oscillograph. Velocity field visualization was achieved using one microsecond duration light pulses scattered by small polystryrene latex spheres in the flow.
    Keywords: FLUID MECHANICS
    Type: NBS The Role of Cavitation in Mech. Failures; p 100-106
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 15
    facet.materialart.
    Unknown
    Effect of cavitation on fluid stability in polymer thickened fluids and lubricants (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The effects of cavitating flow on the polymeric additives used in functional fluids are described. A comparison of thermal and mechanical stability tests for these polymer solutions show distinct differences in the machanism of the polymer degradation. The thermal degradation tests appear to cause an unzippering or depolymerization type of reaction in which there is no particular selectivity based on molecular weight. The mechanical degradation of these fluids appears to be based on molecular weight. Measurements of molecular weight distributions during mechanical degradation show that for a given level of intensity only molecules above a certain minimum size are degraded. The effects of ultrasonic radiation on polymer degradation are reported. Tests were conducted to demonstrate the mechanism of mechanical polymer degradiation in an orifice. A more severe test than the orifice test in which two tapered roller bearings loaded against each other produce the mechanical breakdown is discussed.
    Keywords: FLUID MECHANICS
    Type: NBS The Role of Cavitation in Mech. Failures; p 88-99
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 16
    facet.materialart.
    Unknown
    Lubricant pressure rippling in dynamic Hertzian contacts induced by surface roughness (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A numerical analysis of the pressure distribution of a lubricant in contact with a rough surface was conducted. The magnitude of the pressures was determined by their root mean square value for the contact of two dimensional cylinders. The pressure was found to vary in the following manner: (1) the location in the contact, (2) the spectrum or frequency content of the surface roughness, (3) the mean plateau film thickness, and (4) the root mean square value of the surface roughness. Mathematical models are developed to show the relationships of the parameters.
    Keywords: FLUID MECHANICS
    Type: NBS The Role of Cavitation in Mech. Failures; p 62-73
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 17
    facet.materialart.
    Unknown
    Examples of oil cavitation erosion in positive displacement pumps (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The effects of cavitation flow on piston type, positive displacement, hydraulic pumps are discussed. The operating principles of the pump and the components which are most subject to erosion effects are described. The mechanisms of cavitation phenomena are identified from photographic records. Curves are developed to show the solubility of air in water, oil-water emulsion, and industrial hydraulic oil.
    Keywords: FLUID MECHANICS
    Type: NBS The Role of Cavitation in Mech. Failures; p 48-53
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 18
    facet.materialart.
    Unknown
    Some practical examples of cavitation erosion and their prevention (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The problem of failures caused by cavitation erosion are discussed. The concepts of intensity of erosion, erosion strength, and the time dependence of erosion rate are analyzed. The relation of these parameters to system variables such as pressure and velocity, and to the properties of materials are investigated. Using several examples of actual cavitation erosion, methods of prevention and their limitations are examined.
    Keywords: FLUID MECHANICS
    Type: NBS The Role of Cavitation in Mech. Failures; p 39-47
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 19
    facet.materialart.
    Unknown
    Recent theories of cavitation damage including non-symmetrical bubble collapse effects (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Theories of cavitation damage mechanisms are discussed. Photographic evidence has shown that the actual collapse of bubbles near a symmetry-destroying feature such as a nearby wall results in a toroidal-like collapse, with the final generation of a liquid microjet oriented toward the wall. Numerical analyses indicate that the shock wave intensity emitted during collapse is not likely to be strong enough to be damaging to most materials. It has been determined that actual damage is usually a result of a combination of impact effect of the microjet and the shock wave pressures generated by bubble rebounds.
    Keywords: FLUID MECHANICS
    Type: NBS The Role of Cavitation in Mech. Failures; p 31-35
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 20
    facet.materialart.
    Unknown
    The role of mechanical properties in cavitation erosion resistance (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Methods for determining the correlations of erosion resistance and mechanical properties of materials are discussed. The most common method of testing cavitation erosion resistance of materials is the vibratory cavitation probe. The instrument and its operation are described. The use of the whirling arm device is considered as a second method. Metallographic investigations of the earliest stages of cavitation erosion damage of metallic materials was conducted. The materials show plastic deformation occurring during the incubation period and increasing until cracks form and metal fragments are lost. The parameters of the work done to cause material fractures are identified. The reactions obtained with specific materials are reported.
    Keywords: FLUID MECHANICS
    Type: NBS The Role of Cavitation in Mech. Failures; p 23-30
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 21
    facet.materialart.
    Unknown
    Role of physical properties of liquids in cavitation erosion (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The dependence of erosion rates on the ambient temperature of water is discussed. The assumption that the gas inside the bubble is compressed adiabatically during collapse gives better agreement with experiments than the assumption that the gas is isothermally compressed. Acoustic impedance is an important liquid parameter that governs the erosion intensity in vibratory devices. The investigation reveals that the major physical properties of liquids governing the intensity of erosion include density, sound speed, surface tension, vapor pressure, gas content, and nuclei distribution.
    Keywords: FLUID MECHANICS
    Type: NBS The Role of Cavitation in Mech. Failures; p 13-22
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 22
    facet.materialart.
    Unknown
    Physics associated with cavitation induced material damage (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The role of cavitation in mechanical failure is discussed. Some of the most common types of material damage associated with the presence of cavitation are surface material removal, delamination and structural vibration. This occurs in external flows such as on propellers, hydrofoils, and high speed non-lifting surfaces. In internal flows, pipe bends, inlets, constructions, pumps and turbines are typical. Nominally nonflowing liquids are also susceptible in, for example, strong acoustic fields and high energy particle detectors. For flowing systems, Bernoulli's equation shows how a local pressure is reduced as the fluid's velocity is increased. At sufficiently high velocities, a tension can actually develop and this has, in fact, been demonstrated experimentally. Once the pressure is reduced below the fluid vapor pressure a vapor cavity can be nucleated. Various aspects of this process are simply shown by considering the flow over a lifting surface.
    Keywords: FLUID MECHANICS
    Type: NBS The Role of Cavitation in Mech. Failures; p 3-12
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 23
    facet.materialart.
    Unknown
    Improvement of electric characteristics of lead accumulators under the action of ultrasounds (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Results are given of experiments conducted in order to improve the electric characteristics of lead accumulators by ultrasonic irradiation of their electrolytes. The experimental results discussed complete the research conducted on static Le2, Le3 and D. Quaiser cells whose solutions were irradiated beforehand with ultrasounds of the frequency of 1 MHz. It is demonstrated that the discharge currents and capacitances of the investigated cells keep to higher values even 1 year after ultrasonic irradiation of the electrolyte. The experimental results are discussed.
    Keywords: AUXILIARY SYSTEMS
    Type: The 4th Natl. Conf. on Acoustics, Vol. 2, B (NASA-TT-F-15663); p 204-209
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 24
    facet.materialart.
    Unknown
    Wall shear in strongly retarded and separated compressible turbulent boundary layers (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: FLUID MECHANICS
    Type: AIAA Journal; 12; Oct. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 25
    facet.materialart.
    Unknown
    Experimental study of the shock-induced unsteady laminar boundary layer on a flat plate (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The behavior of the unsteady laminar boundary layer induced by the incident shock wave passing over a flat plate mounted in a shock tube has been experimentally studied for shock speeds ranging from 2.35 to 7.34 km/sec by measuring unsteady heat transfer rates to the plate using thin-film heat-flux gages. Theoretical heat-transfer rates were predicted from analytical solutions in the literature which describe the unsteady flat plate boundary layer development for equilibrium real-gas flows. Experimental results obtained for both air and nitrogen were found to be in good agreement with the theoretical predictions.
    Keywords: FLUID MECHANICS
    Type: Physics of Fluids; 17; May 1974
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 26
    facet.materialart.
    Unknown
    Conservation equations of gasdynamics in curvilinear coordinate systems (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Description of a new method of writing the conservation equations of gasdynamics in curvilinear coordinates which eliminates undifferentiated terms. It is thus possible to readily apply difference schemes derived for Cartesian coordinates which conserve mass, momentum, and energy in the total flow field. The method is derived for orthogonal coordinates, and then extended to cover the most general class of coordinate transformations, using general tensor analysis. Several special features of the equations are discussed.
    Keywords: FLUID MECHANICS
    Type: Journal of Computational Physics; 14; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 27
    facet.materialart.
    Unknown
    Comments on Crocco's solution and the independence principle for compressible turbulent boundary layers (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The purpose of the present note is to show that on a flat plate where both the wall temperature and mean wall pressure are constant, neither of the limitations of parallel flow or of unity for the turbulent Prandtl number are required in order for the Crocco solution to apply to the turbulent boundary-layer flow. It is shown herein that this result is subject to restrictions on the magnitude of pressure fluctuations. The same analysis is generalized to show that the compressible turbulent boundary layer on an isothermal swept flat plate is independent of the spanwise flow if the molecular Prandtl number is unity.
    Keywords: FLUID MECHANICS
    Type: AIAA Journal; 12; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 28
    facet.materialart.
    Unknown
    Studies of liquid floating zones on SL-IV, the third Skylab mission (1974)
    In:  Other Sources
    Details
    Publication Date: 2019-01-25
    Description: The behavior of liquid floating zones in a zero-gravity environment was studied by Dr. E. Gibson on SL-4. These experiments were designed from the results of previous work on floating zones in a simulated zero-gravity model. Molten floating zones are used on earth for the crystal growth and zone refining of reactive materials. The Skylab studies give some insight into the problems associated with the development of the technique for the future space processing of materials. Preliminary results are presented on the stability of the liquid zone surface under static, rotational and vibrational conditions without gravitational constraints.
    Keywords: FLUID MECHANICS
    Type: NASA. Marshall Space Flight Center Proc. of the 3d Space Processing Symp. on Skylab Results, Vol. 2; p 837-856
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 29
    facet.materialart.
    Unknown
    Fluid motions in a low-G environment (1974)
    In:  Other Sources
    Details
    Publication Date: 2019-01-25
    Description: The importance of natural convection and other fluid motions in low-g space processing is now well recognized. Recent space experiments in the areas of natural convection and material processing, as well as results of theoretical studies, have yielded much needed information on fluid behavior in low-g environments. The state of knowledge of fluid motions in low-g environments is reviewed and the dimensional analysis approach used to assess the relative importances of various driving forces for fluid flow in four of the Skylab material processing experiments outlined. Results of dimensional analyses for the Skylab experiments, subsequently confirmed by actual space data, are presented. Finally, the limits of dimensional analysis in assessment studies are indicated.
    Keywords: FLUID MECHANICS
    Type: NASA. Marshall Space Flight Center Proc. of the 3d Space Processing Symp. on Skylab Results, Vol. 2; p 691-727
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 30
    facet.materialart.
    Unknown
    Experiments on confined turbulent jets in cross flow (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Results are reported of experiments on the effects of an opposite wall on the characteristics of turbulent jets injected into a cross flow, for unheated and heated jets. Longitudinal and transverse distributions of velocity and temperature are presented for single and multiple circular jets, and trajectories are presented for two-dimensional jets. The opposite wall has relatively little effect on a single jet unless the ratio of jet to cross flow momentum flux is large enough for the jet to impinge on the opposite wall. For a row of jets aligned perpendicularly to the cross flow, the opposite wall exerts progressively larger influence as the spacing between jets decreases. Much of the effect of jet and wall proximity can be understood by considering the interaction of the vortex flow which is the major feature of the structure of a single jet in a cross flow. Smoke photographs are shown to elucidate some of the interaction patterns.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-2392
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 31
    facet.materialart.
    Unknown
    Decay of far flow field in trailing vortices (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A finite difference machine code is used in the wake vortex problems in the quasi-cylindrical boundary layer approximation. A turbulent energy model containing new features is developed that accounts for the major effects disclosed by more advanced models in which the parameters are not yet established. Several puzzles that arose in previous theoretical investigations of wake vortices are resolved.
    Keywords: FLUID MECHANICS
    Type: NASA-TN-D-7568 , A-5181
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 32
    facet.materialart.
    Unknown
    Effect of throttling on interface behavior and liquid residuals in weightlessness (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An experimental investigation was conducted to study liquid-vapor interface behavior and subsequent vapor ingestion in a flat-bottomed cylindrical tank following a single-step throttling in outflow rate in a weightless environment. A throttling process in which the final Weber number was one-tenth of the initial Weber number tended to excite large-amplitude symmetric slosh, with the amplitude generally increasing as initial Weber number increased. As expected, liquid residuals were lower than those obtained without throttling and, for moderate values of initial Weber number, could be adequately predicted by assuming that all draining took place at the final Weber number. At large values of Weber number, residuals tended to be lower than this predicted value.
    Keywords: FLUID MECHANICS
    Type: NASA-TM-X-3034 , E-7833
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 33
    facet.materialart.
    Unknown
    Comparison of measured and calculated velocity profiles of a laminar incompressible free jet at low Reynolds numbers (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A comparison of the measured and calculated velocity profiles of a laminar, incompressible, low Reynolds number jet is presented. The experimental jet was produced by a nozzle which consists of a porous metal plate covering the end of a pipe. This nozzle produces a uniform exit velocity profile at Reynolds numbers well below those at which conventional contoured nozzles are completely filled by the boundary layer. A jet mixing analysis based on the boundary-layer equations accurately predicted the velocity field for each test condition. The Reynolds number based on nozzle diameter ranged from 50 to 1000 with jet exit velocity either 30 or 61 m/s (100 or 200 ft/sec).
    Keywords: FLUID MECHANICS
    Type: NASA-TN-D-7510 , L-9277
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 34
    facet.materialart.
    Unknown
    An experimental investigation of wall boundary layer transition Reynolds numbers in an expansion tube (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Experimental measurements of boundary-layer transition in an expansion-tube test-gas flow are presented along with radial distributions of pitot pressure. An integral method for calculating constant Reynolds number lines for an expansion-tube flow is introduced. Comparison of experimental data and constant Reynolds number calculations has shown that for given conditions, wall boundary-layer transition occurs at a constant Reynolds number in an expansion-tube flow. Operating conditions in the expansion tube were chosen so that the effects of test-gas nonequilibrium on boundary-layer transition could be studied.
    Keywords: FLUID MECHANICS
    Type: NASA-TN-D-7541 , L-9337
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 35
    facet.materialart.
    Unknown
    The application of Riegels' rule and time-like damping to transonic flow calculations (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Finite difference relaxation solutions of the nonlinear small perturbation equations have proven reliable and successful in determining the transonic flowfields about thin airfoils. However, application of the small perturbation approach to thick airfoils usually results in an accuracy less than desirable. The incorporation of Riegels' Rule and time-like damping into the small perturbation approach and their application to thick and thin airfoils in transonic flow are discussed. Studies for thick and thin airfoils are presented. It is concluded that Riegels' Rule and damping should both be included in small perturbation transonic flow calculations.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-138181 , TAMRF-3033-7401 , AIAA Southwestern Student Paper Competition; Arlington, TX; United States
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 36
    facet.materialart.
    Unknown
    A weak interaction study of the viscous flow about oscillating airfoils (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An incompressible inviscid and a viscous flow calculation procedure is developed by assuming the viscous correction to the inviscid flow pressure distribution is small (weak interaction) to predict the flow about airfoils oscillating in pitch and heave. The calculations made in the investigation predict the detailed viscous flow regions including transition and separation phenomena and provide a detailed analysis of leading edge separation, transition, and reattachment. Results from the calculation show the leading edge viscous flow field to be quasi-steady although the imposed inviscid pressure distribution shows significant unsteady effects. Although unable to predict the flow field about a stalled airfoil, the indications are that the present procedure can indicate the onset of catastrophic flow separation.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-132425
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 37
    facet.materialart.
    Unknown
    Topics in structural dynamics: Nonlinear unsteady transonic flows and Monte Carlo methods in acoustics (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The results are reported of two unrelated studies. The first was an investigation of the formulation of the equations for non-uniform unsteady flows, by perturbation of an irrotational flow to obtain the linear Green's equation. The resulting integral equation was found to contain a kernel which could be expressed as the solution of the adjoint flow equation, a linear equation for small perturbations, but with non-constant coefficients determined by the steady flow conditions. It is believed that the non-uniform flow effects may prove important in transonic flutter, and that in such cases, the use of doublet type solutions of the wave equation would then prove to be erroneous. The second task covered an initial investigation into the use of the Monte Carlo method for solution of acoustical field problems. Computed results are given for a rectangular room problem, and for a problem involving a circular duct with a source located at the closed end.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-138110 , ESS-4022-113-74
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 38
    facet.materialart.
    Unknown
    The development of a solar-powered residential heating and cooling system (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Efforts to demonstrate the engineering feasibility of utilizing solar power for residential heating and cooling are described. These efforts were concentrated on the analysis, design, and test of a full-scale demonstration system which is currently under construction at the National Aeronautics and Space Administration, Marshall Space Flight Center, Huntsville, Alabama. The basic solar heating and cooling system under development utilizes a flat plate solar energy collector, a large water tank for thermal energy storage, heat exchangers for space heating and water heating, and an absorption cycle air conditioner for space cooling.
    Keywords: AUXILIARY SYSTEMS
    Type: NASA-TM-X-70089 , M-TU-74-3
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 39
    facet.materialart.
    Unknown
    Comparative evaluation of solar, fission, fusion, and fossil energy resources. Part 1: Solar energy (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The utilization of solar energy to meet the energy needs of the U.S. is discussed. Topics discussed include: availability of solar energy, solar energy collectors, heating for houses and buildings, solar water heater, electric power generation, and ocean thermal power.
    Keywords: AUXILIARY SYSTEMS
    Type: NASA-CR-137242
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 40
    facet.materialart.
    Unknown
    High voltage solar array experiments (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The interaction between the components of a high voltage solar array and a simulated space plasma is studied to obtain data for the design of a high voltage solar array capable of 15kW at 2 to 16kV. Testing was conducted in a vacuum chamber 1.5-m long by 1.5-m diameter having a plasma source which simulated the plasma conditions existing in earth orbit between 400 nautical miles and synchronous altitude. Test samples included solar array segments pinholes in insulation covering high voltage electrodes, and plain dielectric samples. Quantitative data are presented in the areas of plasma power losses, plasma and high voltage induced damage, and dielectric properties. Limitations of the investigation are described.
    Keywords: AUXILIARY SYSTEMS
    Type: NASA-CR-121280
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 41
    facet.materialart.
    Unknown
    Drag and distribution measurements of single-element fuel injectors for supersonic combustors (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The drag caused by several vortex generating fuel injectors for scramjet combustors was measured in a Mach 2 to 3.5 airstream. Injector drag was found to be strongly dependent on injector thickness ratio. The distribution of helium injected into the stream was measured both in the near field and the far field of the injectors for a variety of pressure ratios. The far field results differed appreciably from measurements in the near field. Injection pressure ratio was found to profoundly influence the penetration. One of the aerowing configurations tested yielded low drag consistent with desirable penetration and spreading characteristics.
    Keywords: FLUID MECHANICS
    Type: NASA-TM-X-3015 , E-7662
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 42
    facet.materialart.
    Unknown
    Numerical calculations of two dimensional, unsteady transonic flows with circulation (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The feasibility of obtaining two-dimensional, unsteady transonic aerodynamic data by numerically integrating the Euler equations is investigated. An explicit, third-order-accurate, noncentered, finite-difference scheme is used to compute unsteady flows about airfoils. Solutions for lifting and nonlifting airfoils are presented and compared with subsonic linear theory. The applicability and efficiency of the numerical indicial function method are outlined. Numerically computed subsonic and transonic oscillatory aerodynamic coefficients are presented and compared with those obtained from subsonic linear theory and transonic wind-tunnel data.
    Keywords: FLUID MECHANICS
    Type: NASA-TN-D-7605 , A-5265
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 43
    facet.materialart.
    Unknown
    Design of H2-O2 space shuttle APU. Volume 1: APU design (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The H2-O2 space shuttle auxiliary power unit (APU) program is a NASA-Lewis effort aimed at hardware demonstration of the technology required for potential use on the space shuttle. It has been shown that a hydrogen-oxygen power unit (APU) system is an attractive alternate to the space shuttle baseline hydrazine APU system for minimum weight. It has the capability for meeting many of the heat sink requirements for the space shuttle vehicle, thereby reducing the amount of expendable evaporants required for cooling in the baseline APU. Volume 1 of this report covers preliminary design and analysis of the current reference system and detail design of the test version of this reference system. Combustor test results are also included. Volume 2 contains the results of the analysis of an initial version of the reference system and the computer printouts of system performance. The APU consists of subsystems for propellant feed and conditioning, turbopower, and control. Propellant feed and conditioning contains all heat exchangers, valves, and the combustor. The turbopower subsystem contains a two-stage partial-admission pressure-modulated, 400-hp, 63,000-rpm turbine, a 0-to 4-g lubrication system, and a gearbox with output pads for two hydraulic pumps and an alternator (alternator not included on test unit). The electronic control functions include regulation of speed and system temperatures; and start-and-stop sequences, overspeed (rpm) and temperature limits, failsafe provisions, and automatic shutdown provisions.
    Keywords: AUXILIARY SYSTEMS
    Type: NASA-CR-121214 , AIRESEARCH-74-9874-PT-1
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 44
    facet.materialart.
    Unknown
    Wind tunnel investigation of aerodynamic characteristics of a scale model of a D5 bulldozer and an M109 self-propelled 155 mm Howitzer (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Wind tunnel tests were conducted on a scale model of a D5 bulldozer and an M109 self-propelled 155 MM howitzer to determine the aerodynamic characteristics of these typical externally-suspended heavy lift helicopter cargo configurations. Tests were made over a large range of pitch and yaw attitudes at a nominal Reynolds number per unit length of 1.5 x 10 to the 6th power.
    Keywords: FLUID MECHANICS
    Type: NASA-TM-X-62330
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 45
    facet.materialart.
    Unknown
    Design of H2-O2 space shuttle APU. Volume 2: Appendixes (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: For abstract, see N74-15737.
    Keywords: AUXILIARY SYSTEMS
    Type: NASA-CR-134485 , AIRESEARCH-74-9874-PT-2
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 46
    facet.materialart.
    Unknown
    Nonlinear cellular motions in Poiseuille channel flow (1974)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: In a number of nonlinear solutions to the equations of channel flow the velocity is decomposed into a mean part plus a nonlinear disturbance. The idea that nonlinear effects place a limitation on the amplitudes of the disturbance flow is considered. In the reported investigation the disturbance flow is represented by drastically limited Fourier expansions in the downstream coordinate. The resulting equations are solved numerically with high accuracy to obtain a good representation of the cross-stream structure of the solution. The results of the investigation show that indeed the nonlinear terms always limit the amplitude of the disturbance flow in this approximation.
    Keywords: FLUID MECHANICS
    Type: Journal of Fluid Mechanics; 64; June 19
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 47
    facet.materialart.
    Unknown
    Computer extension and analytic continuation of Stokes' expansion for gravity waves (1974)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: Stokes' infinitesimal-wave expansion for steady progressive free-surface waves has been extended to high order using a computer to perform the coefficient arithmetic. Stokes' expansion has been found to be incapable of yielding the highest wave for any value of the water depth since convergence is limited by a square-root branch-point some distance short of the maximum. By reformulating the problem using a different independent parameter, the highest waves are obtained correctly. Series summation and analytic continuation are facilitated by the use of Pade approximants. The method is valid in principle for any finite value of the wavelength and solutions of high accuracy can be obtained for most values of the wave height and water depth.
    Keywords: FLUID MECHANICS
    Type: AD-A000773 , AFOSR-74-1574TR , Journal of Fluid Mechanics; 62; Feb. 11
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 48
    facet.materialart.
    Unknown
    Boundary-layer transition and displacement thickness effects on zero-lift drag of a series of power-law bodies at Mach 6 (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Wave and skin-friction drag have been numerically calculated for a series of power-law bodies at a Mach number of 6 and Reynolds numbers, based on body length, from 1.5 million to 9.5 million. Pressure distributions were computed on the nose by the inverse method and on the body by the method of characteristics. These pressure distributions and the measured locations of boundary-layer transition were used in a nonsimilar-boundary-layer program to determine viscous effects. A coupled iterative approach between the boundary-layer and pressure-distribution programs was used to account for boundary-layer displacement-thickness effects. The calculated-drag coefficients compared well with previously obtained experimental data.
    Keywords: FLUID MECHANICS
    Type: NASA-TN-D-7723 , L-9646
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 49
    facet.materialart.
    Unknown
    Turbulent transport of heat and momentum in a boundary layer subject to deceleration, suction and variable wall temperature (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The relationship between the turbulent transport of heat and momentum in an adverse pressure gradient boundary layer was studied. An experimental study was conducted of turbulent boundary layers subject to strong adverse pressure gradients with suction. Near-equilibrium flows were attained, evidenced by outer-region similarity in terms of defect temperature and defect velocity profiles. The relationship between Stanton number and enthalpy thickness was shown to be the same as for a flat plate flow both for constant wall temperature boundary conditions and for steps in wall temperature. The superposition principle used with the step-wall-temperature experimental result was shown to accurately predict the Stanton number variation for two cases of arbitrarily varying wall temperature. The Reynolds stress tensor components were measured for strong adverse pressure gradient conditions and different suction rates. Two peaks of turbulence intensity were found: one in the inner and one in the outer regions. The outer peak is shown to be displaced outward by an adverse pressure gradient and suppressed by suction.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-139655 , SU-HMT-17
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 50
    facet.materialart.
    Unknown
    Investigation of an anomalous flow condition of the Langley pilot model expansion tube (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Free-stream flow velocity measurements were made in the Langley pilot model expansion tube during the test flow interval. During this interval, an anomalous dip in pitot pressure occurs for the expansion tube operating conditions employed. Within the test flow interval, the main conclusions reached from comparison of the measured flow velocity, pitot pressure, and tube wall pressure are: the variations which occur in velocity and wall pressure are small compared with the variations in pitot pressure; a corresponding dip in the derived flow density is associated with the dip in pitot pressure; and the value of the average density over the interval, which results from the expansion from the shocked intermediate chamber condition, is approximately one-half of the value that can result from only an isentropic process.
    Keywords: FLUID MECHANICS
    Type: NASA-TN-D-7704 , L-9633
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 51
    facet.materialart.
    Unknown
    Boundary layer integral matrix procedure code modifications and verifications (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A summary of modifications to Aerotherm's Boundary Layer Integral Matrix Procedure (BLIMP) code is presented. These modifications represent a preliminary effort to make BLIMP compatible with other JANNAF codes and to adjust the code for specific application to rocket nozzle flows. Results of the initial verification of the code for prediction of rocket nozzle type flows are discussed. For those cases in which measured free stream flow conditions were used as input to the code, the boundary layer predictions and measurements are in excellent agreement. In two cases, with free stream flow conditions calculated by another JANNAF code (TDK) for use as input to BLIMP, the predictions and the data were in fair agreement for one case and in poor agreement for the other case. The poor agreement is believed to result from failure of the turbulent model in BLIMP to account for laminarization of a turbulent flow. Recommendations for further code modifications and improvements are also presented.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-120364 , AEROTHERM-74-95
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 52
    facet.materialart.
    Unknown
    Comparison of interference-free numerical results with sample experimental data for the AEDC wall-interference model at transonic and subsonic flow conditions (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Numerical results obtained from two computer programs recently developed with NASA support and now available for use by others are compared with some sample experimental data taken on a rectangular-wing configuration in the AEDC 16-Foot Transonic Tunnel at transonic and subsonic flow conditions. This data was used in an AEDC investigation as reference data to deduce the tunnel-wall interference effects for corresponding data taken in a smaller tunnel. The comparisons were originally intended to see how well a current state-of-the-art transonic flow calculation for a simple 3-D wing agreed with data which was felt by experimentalists to be relatively interference-free. As a result of the discrepancies between the experimental data and computational results at the quoted angle of attack, it was then deduced from an approximate stress analysis that the sting had deflected appreciably. Thus, the comparisons themselves are not so meaningful, since the calculations must be repeated at the proper angle of attack. Of more importance, however, is a demonstration of the utility of currently available computational tools in the analysis and correlation of transonic experimental data.
    Keywords: FLUID MECHANICS
    Type: NASA-TM-X-71991
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 53
    facet.materialart.
    Unknown
    Evaluation program for secondary spacecraft cells. Initial evaluation tests of General Electric Company standard and teflonated negative electrode 20.0 ampere-hour, nickel-cadmium spacecraft cells with auxiliary electrodes (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The standard plate cells exhibited higher average end-of-charge (EOC) voltages than the cells with teflonated negative plates; they also delivered a higher capacity output in ampere hours following these charges. All the cells reached a pressure of 20 psia before reaching the voltage limit of 1.550 volts during the pressure versus capacity test. The average ampere hours in and voltages at this pressure were 33.6 and 1.505 volts respectively for the teflonated negative plate cells and 35.5 and 1.523 volts for the standard plate cells. All cells exhibited pressure decay in the range of 1 to 7 psia during the last 30 minutes of the 1-hour open circuit stand. Average capacity out for the teflonated and standard negative plate cells was 29.4 and 29.9 ampere hours respectively.
    Keywords: AUXILIARY SYSTEMS
    Type: NASA-CR-139654 , WQEC/C-74-337
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 54
    facet.materialart.
    Unknown
    An experimental investigation of the flow field for double-wedge configurations in a Mach 4.97 stream (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The viscous-inviscid interactions which perturb the flow around the wing leading edge are discussed. The flow field perturbation results when the fuselage-generated shock wave interacts with the wing-generated shock wave. Three types of shock interference patterns are possible for the wing leading edge of the orbiter.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-134386 , REPT-74003
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 55
    facet.materialart.
    Unknown
    Quantized vortices around wavefront nodes, 2 (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Quantized vortices can occur around nodal points in wavefunctions. The derivation depends only on the wavefunction being single valued, continuous, and having continuous first derivatives. Since the derivation does not depend upon the dynamical equations, the quantized vortices are expected to occur for many types of waves such as electromagnetic and acoustic. Such vortices have appeared in the calculations of the H + H2 molecular collisions and play a role in the chemical kinetics. In a companion paper, it is shown that quantized vortices occur when optical waves are internally reflected from the face of a prism or particle beams are reflected from potential energy barriers.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-139530 , WIS-TCI-515
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 56
    facet.materialart.
    Unknown
    An experimental and theoretical study of the flow phenomena within a vortex sink rate sensor (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Tests were conducted to obtain a description of the flow field within a vortex sink rate sensor and to observe the influence of viscous effects on its performance. The characteristics of the sensor are described. The method for conducting the test is reported. It was determined that for a specific mass flow rate and the geometry of the vortex chamber, the flow in the vortex chamber was only affected, locally, by the size of the sink tube diameter. Within the sink tube, all three velocity components were found to be higher for the small sink tube diameters. As the speed of rotation of the sensor was increased, the tangential velocities within the vortex chamber, as well as in the sink tube, increased in proportion to the speed of rotation.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-139648 , TR-74-T2
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 57
    facet.materialart.
    Unknown
    Improvements to embedded shock wave calculations for transonic flow-applications to wave drag and pressure rise predictions (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The numerical solution of a single, mixed, nonlinear equation with prescribed boundary data is discussed. A second order numerical procedure for solving the nonlinear equation and a shock fitting scheme was developed to treat the discontinuities that appear in the solution.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-139487
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 58
    facet.materialart.
    Unknown
    The use of digital techniques to examine the intermittent region of a turbulent jet (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Voltage signals, sampled at a high rate in the intermittent region of a round jet, are analyzed to provide instantaneous velocity vector information and measures of the vorticity and dissipation scales. A clustering routine to assess the feasibility of using the voltage readings to define the vortical, nonvortical state of the flow is also utilized. The results indicate that the clustering routine is partially successful; more sophisticated discrimination techniques will be required for a complete specification.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-139396
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 59
    facet.materialart.
    Unknown
    Transonic conical flow (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The problem of inviscid, steady transonic conical flow, formulated in terms of the small disturbance theory, is studied. The small disturbance equation and similarity rules are presented, and a boundary value problem is formulated for the case of a supersonic freestream Mach number. The equation for the perturbation potential is solved numerically using an elliptic finite difference system. The difference equations are solved with a point relaxation algorithm that is also capable of capturing the shock wave during the iteration procedure by using the boundary conditions at the shock. Numerical calculations, for shock location, pressure distribution and drag coefficient, are presented for a family of nonlifting conical wings. The theory of slender wings is also presented and analytical results for pressure and drag coefficients are obtained.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-139564 , UCLA-ENG-7382
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 60
    facet.materialart.
    Unknown
    A modified Newton-Raphson analysis of flight measurements of the trailing vortices of a heavy jet transport (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A modified Newton-Raphson method has been used to determine the parameters in equations describing the vortex flow to obtain a best match with flight measurements of the flow behind the C-5A airplane. The flight measurements were made using a specially instrumented T-33 airplane which passed as closely as possible to the centers of the trailing vortices at several distances behind the C-5A airplane. The flight measurements were transformed to flow velocity relative to an inertial frame of reference. The assumed form of the flow consisted of the superposition of two counterrotating, finite core vortices. The positions of the vortex centers, their total circulation, the effective eddy viscosity and measurement bias were the parameters adjusted. The assumed form of vortex flow fit well the measured velocities for the numerous sets of data, both flaps up and down for the C-5A airplane. The resulting values of total circulation, however, were about two-thirds that expected of a wing with an elliptical loading. A partial explanation of the less than expected circulation is a dip in the spanwise lift distribution at the airplane's center line. The distance between the trailing vortices at the smallest times encountered is somewhat less than that expected for an elliptical wing loading.
    Keywords: FLUID MECHANICS
    Type: NASA-TN-D-7404 , L-8838
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 61
    facet.materialart.
    Unknown
    Performance of finned thermal capacitors (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The performance of typical thermal capacitors, both in earth and orbital environments, was investigated. Techniques which were used to make predictions of thermal behavior in a one-g earth environment are outlined. Orbital performance parameters are qualitatively discussed, and those effects expected to be important under zero-g conditions are outlined. A summary of thermal capacitor applications are documentated, along with significant problem areas and current configurations. An experimental program was conducted to determine typical one-g performance, and the physical significance of these data is discussed in detail. Numerical techniques were employed to allow comparison between analytical and experimental data.
    Keywords: AUXILIARY SYSTEMS
    Type: NASA-TN-D-7690
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 62
    facet.materialart.
    Unknown
    Transport dynamics of a high-power-density matrix-type hydrogen-oxygen fuel cell (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Experimental transport dynamics tests were made on a space power fuel cell of current design. Various operating transients were introduced and transport-related response data were recorded with fluidic humidity sensing instruments. Also, sampled data techniques were developed for measuring the cathode-side electrolyte concentration during transient operation.
    Keywords: AUXILIARY SYSTEMS
    Type: NASA-TN-D-7757 , E-7876
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 63
    facet.materialart.
    Unknown
    Analysis of sound propagation in ducts using the wave envelope concept (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A finite difference formulation is presented for sound propagation in a rectangular two-dimensional duct without steady flow for plane wave input. Before the difference equations are formulated, the governing Helmholtz equation is first transformed to a form whose solution does not oscillate along the length of the duct. This transformation reduces the required number of grid points by an order of magnitude, and the number of grid points becomes independent of the sound frequency. Physically, the transformed pressure represents the amplitude of the conventional sound wave. Example solutions are presented for sound propagation in a one-dimensional straight hard-wall duct and in a two-dimensional straight soft-wall duct without steady flow. The numerical solutions show evidence of the existence along the duct wall of a developing acoustic pressure diffusion boundary layer which is similar in nature to the conventional viscous flow boundary layer. In order to better illustrate this concept, the wave equation and boundary conditions are written such that the frequency no longer appears explicitly in them. The frequency effects in duct propagation can be visualized solely as an expansion and stretching of the suppressor duct.
    Keywords: FLUID MECHANICS
    Type: NASA-TN-D-7719 , E-7941
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 64
    facet.materialart.
    Unknown
    Calculation of turbulent shear stress in supersonic boundary layer flows (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An analysis of turbulent boundary layer flow characteristics and the computational procedure used are discussed. The integrated mass and momentum flux profiles and differentials of the integral quantities are used in the computations so that local evaluation of the streamwise velocity gradient is not necessary. The computed results are compared with measured shear stress data obtained by using hot wire anemometer and laser velocimeter techniques. The flow measurements were made upstream and downstream of an adiabatic unseparated interaction of an oblique shock wave with the turbulent boundary layer on the flat wall of a two dimensional wind tunnel. A comparison of the numerical analysis and actual measurements is made and the effects of small differences in mean flow profiles on the computed shear stress distributions are discussed.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-138302
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 65
    facet.materialart.
    Unknown
    Shock-induced separation of adiabatic turbulent boundary layers in supersonic axially symmetric internal flow (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An experimental investigation at Mach 4 of shock-induced turbulent boundary layer separation at the walls of axially symmetric flow passages is discussed, with particular emphasis placed on determining the shock strengths required for incipient separation. The shock waves were produced by interchangeable sting-mounted cones placed on the axes of the flow passages and aligned with the freestream flow. The interactions under study simulate those encountered in axially symmetric engine inlets of supersonic aircraft. Knowledges of the shock strengths required for boundary layer separation in inlets is important since for shocks of somewhat greater strength rather drastic alterations in the inlet flow field may occur.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-138303
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 66
    facet.materialart.
    Unknown
    Mean and fluctuating flow measurements in axisymmetric supersonic boundary layer flow subjected to distributed adverse pressure gradients (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Measurements have been made of the mean flow properties and turbulent fluctuations in adiabatic turbulent boundary layer flows subjected to distributed adverse pressure gradients. In the freestream region upstream of the adverse pressure gradient the Mach number was 3.86, the unit Reynolds number 5.3 million per foot. The boundary layer developed on the wall of an axisymmetric nozzle and straight test section. In order to avoid the effects of streamwise surface curvature the adverse pressure gradients at the test section wall were induced by contoured centerbodies mounted on the wind tunnel centerline. The flow under study simulated that which might be found in an axially symmetric engine inlet of a supersonic aircraft.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-139435
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 67
    facet.materialart.
    Unknown
    Combustion of hydrogen-air jets in local chemical equilibrium: A guide to the CHARNAL computer program (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A guide to a computer program, written in FORTRAN 4, for predicting the flow properties of turbulent mixing with combustion of a circular jet of hydrogen into a co-flowing stream of air is presented. The program, which is based upon the Imperial College group's PASSA series, solves differential equations for diffusion and dissipation of turbulent kinetic energy and also of the R.M.S. fluctuation of hydrogen concentration. The effective turbulent viscosity for use in the shear stress equation is computed. Chemical equilibrium is assumed throughout the flow.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-2407 , REPT-73-1
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 68
    facet.materialart.
    Unknown
    Solutions of the Navier-Stokes equations for vortex breakdown (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Steady solutions of the Navier-Stokes equations, in terms of velocity and pressure, for breakdown in an unconfined viscous vortex are obtained numerically using the artificial compressibility technique of Chorin combined with an ADI finite-difference scheme. Axisymmetry is assumed and boundary conditions are carefully applied at the boundaries of a large finite region in an axial plane while resolution near the axis is maintained by a coordinate transformation. The solutions, which are obtained for Reynolds numbers up to 200 based on the free-stream axial velocity and a characteristic core radius, show that breakdown results from the diffusion and convection of vorticity away from the vortex core which, because of the strong coupling between the circumferential and axial velocity fields in strongly swirling flows, can lead to stagnation and reversal of the axial flow near the axis.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-138901 , FM-74-6
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 69
    facet.materialart.
    Unknown
    Multi-kw dc power distribution system study program (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The first phase of the Multi-kw dc Power Distribution Technology Program is reported and involves the test and evaluation of a technology breadboard in a specifically designed test facility according to design concepts developed in a previous study on space vehicle electrical power processing, distribution, and control. The static and dynamic performance, fault isolation, reliability, electromagnetic interference characterisitics, and operability factors of high distribution systems were studied in order to gain a technology base for the use of high voltage dc systems in future aerospace vehicles. Detailed technical descriptions are presented and include data for the following: (1) dynamic interactions due to operation of solid state and electromechanical switchgear; (2) multiplexed and computer controlled supervision and checkout methods; (3) pulse width modulator design; and (4) cable design factors.
    Keywords: AUXILIARY SYSTEMS
    Type: NASA-CR-120241
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 70
    facet.materialart.
    Unknown
    Similitude requirements for hypersonic, rarefied, nonequilibrium flow (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Similitude requirements for hypersonic, rarefied flow with nonequilibrium chemistry and vibration are presented. The full Navier-Stokes equations with catalytic or noncatalytic walls and with or without slip conditions are nondimensionalized. The heat transfer coefficient is written in terms of fourteen dimensionless parameters and reduced to four by making the binary scaling assumption. Duplication of blunt and sharp nose heat transfer requires the use of air over a geometrically similar model with the same free stream velocity, wall temperature and product of free stream density and characteristic length. Estimates of this heat transfer coefficient are also presented.
    Keywords: FLUID MECHANICS
    Type: NASA-TM-X-64859
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 71
    facet.materialart.
    Unknown
    Development of a method of analysis and computer program for calculating the inviscid flow about the windward surfaces of space shuttle configurations at large angles of attack (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A general method developed for the analysis of inviscid hypersonic shock layers is discussed for application to the case of the shuttle vehicle at high (65 deg) angle of attack. The associated extensive subsonic flow region caused convergence difficulties whose resolution is discussed. It is required that the solution be smoother than anticipated.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-132453 , MML-TR-74-5C
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 72
    facet.materialart.
    Unknown
    Assessment and control of electrostatic charges (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The experience is described of NASA and DOD with electrostatic problems, generation mechanisms, and type of electrostatic hazards. Guidelines for judging possible effects of electrostatic charges on space missions are presented along with mathematical formulas and definitions.
    Keywords: AUXILIARY SYSTEMS
    Type: NASA-SP-8111
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 73
    facet.materialart.
    Unknown
    Structure and function of an inorganic-organic separator for electrochemical cells: Preliminary study (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The structure of a new separator material for electrochemical cells has been investigated. Investigation into details of the separator structure showed it to be multilayered and to consist mainly of a quasi-impervious organic skin, a porous region of mixed organic and inorganic material, and an area of nonuniformly treated substrate. The essential feature of the coating (slurry) is believed to be interconnected pores which allow ionic conductivity. The interconnected pores are believed to be formed by the interaction of the plasticizer and inorganic fibers. The major failure mode of silver zinc cells using such a separator (zinc nodules shorting adjacent plates) was investigated.
    Keywords: AUXILIARY SYSTEMS
    Type: NASA-TM-X-3080 , E-7871
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 74
    facet.materialart.
    Unknown
    General survey of solid-waste management (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Potential ways of providing solid-waste management for a building complex serviced by a modular integrated utility system (MIUS) were explored. Literature surveys were conducted to investigate both conventional and unusual systems to serve this purpose. The advantages and disadvantages of the systems most compatible with MIUS are discussed.
    Keywords: AUXILIARY SYSTEMS
    Type: NASA-TM-X-58133 , JSC-08696
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 75
    facet.materialart.
    Unknown
    Performance of a Brayton power system with a space type radiator (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Test results of an experimental investigation to measure Brayton engine performance while operating at the sink temperatures of a typical low earth orbit are presented. The results indicate that the radiator area was slightly oversized. The steady state and transient responses of the power system to the sink temperatures in orbit were measured. During the orbital operation, the engine did not reach the steady state operation of either sun or shade conditions. The alternator power variation during orbit was + or - 4 percent from its mean value of 9.3 kilowatts.
    Keywords: AUXILIARY SYSTEMS
    Type: NASA-TN-D-7708 , E-7799
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 76
    facet.materialart.
    Unknown
    Effect of mean-velocity profile shapes on sound transmission through two-dimensional ducts (1974)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: Acoustic propagation through a lined two-dimensional duct is examined in order to assess the influence of the shape of the mean-velocity profile on the attenuation rate. Five mean-velocity profiles are considered: linear, parabolic, Pohlhausen, 1/7th power law with a linear sub-layer, and linear with slip at the wall. It is shown that when the attenuation rate is tabulated as a function of the boundary-layer thickness, as is usually done, substantially different results are obtained from the several mean profiles. However, when the displacement thickness is used, a considerable collapse is achieved in the attenuation curves that are obtained from the various profiles. For downstream propagation, all profiles produce essentially the same results over a reasonable range of boundary-layer thickness. However, for many cases of upstream propagation, the results from the 'turbulent' boundary-layer profiles differ significantly from the results of the other profiles even when compared on the basis of displacement thickness.
    Keywords: FLUID MECHANICS
    Type: Journal of Sound and Vibration; 34; June 8
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 77
    facet.materialart.
    Unknown
    Turbulent vortex streets and the entrainment mechanism of the turbulent wake (1974)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: The results of an experimental investigation of a turbulent vortex street in the range from 1000 to 20,000 are presented. The vortex street was created by the motion of a circular cylinder in a motionless fluid (mercury). Photographs obtained showed that the turbulent street, created by the vortex shedding behind the cylinder, persisted at longer downstream distances and higher Reynolds numbers than previously reported in the literature. A theory was developed to account for the experimental measurements pertaining to the change of the geometrical characteristics, (the distance between the two rows of vortices and the longitudinal distance between two consecutive vortices on the same row), of the street in the downstream direction. The implications of the structure of the vortex street on the entrainment mechanism of the turbulent wake are discussed.
    Keywords: FLUID MECHANICS
    Type: Journal of Fluid Mechanics; 62; Jan. 8
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 78
    facet.materialart.
    Unknown
    Cavitation in liquid cryogens. 4: Combined correlations for venturi, hydrofoil, ogives, and pumps (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The results of a series of experimental and analytical cavitation studies are presented. Cross-correlation is performed of the developed cavity data for a venturi, a hydrofoil and three scaled ogives. The new correlating parameter, MTWO, improves data correlation for these stationary bodies and for pumping equipment. Existing techniques for predicting the cavitating performance of pumping machinery were extended to include variations in flow coefficient, cavitation parameter, and equipment geometry. The new predictive formulations hold promise as a design tool and universal method for correlating pumping machinery performance. Application of these predictive formulas requires prescribed cavitation test data or an independent method of estimating the cavitation parameter for each pump. The latter would permit prediction of performance without testing; potential methods for evaluating the cavitation parameter prior to testing are suggested.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-2448
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 79
    facet.materialart.
    Unknown
    Use of hexafluoroethane to simulate the inviscid real-gas effects on blunt entry vehicles (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Results are presented of an experimental and theoretical investigation of the use of equilibrium hexafluoroethane C2F6 as an undissociated test gas in a wind tunnel to simulate the inviscid aerodynamic characteristics of blunt bodies in high-speed flight where dissociation occurs. The results indicate that the use of C2F6 as a test gas in wind tunnels is a practical and relatively simple and inexpensive method of obtaining test conditions with large normal-shock density ratios. Equations for the thermodynamic and transport properties of C2F6 are also included.
    Keywords: FLUID MECHANICS
    Type: NASA-TN-D-7701 , L-9459
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 80
    facet.materialart.
    Unknown
    Improved curve fits for the thermodynamic properties of equilibrium air suitable for numerical computation using time-dependent or shock-capturing methods, part 1 (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Simplified curve fits for the thermodynamic properties of equilibrium air were devised for use in either the time-dependent or shock-capturing computational methods. For the time-dependent method, curve fits were developed for p = p(e, rho), a = a(e, rho), and T = T(e, rho). For the shock-capturing method, curve fits were developed for h = h(p, rho) and T = T(p, rho). The ranges of validity for these curves fits were for temperatures up to 25,000 K and densities from 10 to the minus 7th power to 10 to the 3d power amagats. These approximate curve fits are considered particularly useful when employed on advanced computers such as the Burroughs ILLIAC 4 or the CDC STAR.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-2470
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 81
    facet.materialart.
    Unknown
    Measurement and correlation of aerodynamic heating to surface corrugation stiffened structures in thick turbulent boundary layers (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The flow conditions for which heating distributions were measured on corrugated surfaces and wavy walls in turbulent boundary layers are shown, along with the ratio of the displacement thickness to the roughness height versus the local edge Mach number for an equivalent smooth surface. The present data are seen to greatly extend the range of data available on corrugated surfaces in turbulent boundary layers. These data were obtained by testing fullscale corrugation roughened panels in the wall boundary layer of a supersonic and hypersonic wind tunnel. The experimental program used to obtain the data is described. The data are analyzed and correlated in terms of the pertinent flow and geometric parameters. The developed correlations are compared with the available thin boundary layer data, as well as with previously published correlation techniques.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-132503
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 82
    facet.materialart.
    Unknown
    On conditional sampling for turbulent flow studies (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The conditional sampling technique is analyzed as a weighted time average for turbulent flow. The various conditional averages are obtained by using different types of weighting functions. A second averaging relation is obtained between the conventional averages and the conditional averages. A few examples are given in which simplified expressions are used.
    Keywords: FLUID MECHANICS
    Type: NASA-TM-X-64886
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 83
    facet.materialart.
    Unknown
    Analysis of dynamic stall using unsteady boundary-layer theory (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The unsteady turbulent boundary layer and potential flow about a pitching airfoil are analyzed using numerical methods to determine the effect of pitch rate on the delay in forward movement of the rear flow reversal point. An explicit finite difference scheme is used to integrate the unsteady boundary layer equations, which are coupled at each instant of time to a fully unsteady and nonlinear potential flow analysis. A substantial delay in forward movement of the reversal point is demonstrated with increasing pitch rate, and it is shown that the delay results partly from the alleviation of the gradients in the potential flow, and partly from the effects of unsteadiness in the boundary layer itself. The predicted delay in flow-reversal onset, and its variation with pitch rate, are shown to be in reasonable agreement with experimental data relating to the delay in dynamic stall. From the comparisons it can be concluded (a) that the effects of time-dependence are sufficient to explain the failure of the boundary layer to separate during the dynamic overshoot, and (b) that there may be some link between forward movement of the reversal point and dynamic stall.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-2462
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 84
    facet.materialart.
    Unknown
    Study of oxygen gas production phenomenon during stand and discharge in silver-zinc batteries (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Standard production procedures for manufacturing silver zinc batteries are evaluated and modified to reduce oxygen generation during open circuit stand and discharge. Production predictions of several variable combinations using analysis models are listed for minimum gassing, with emphasis on the concentration of potassium hydroxide in plate formation. A recommendation for work optimizing the variables involved in plate processing is included.
    Keywords: AUXILIARY SYSTEMS
    Type: NASA-CR-140306
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 85
    facet.materialart.
    Unknown
    Energy and economic analysis of total energy systems for residential and commercial buildings (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Energy and economic analyses were performed for an on-site power-plant with waste heat recovery. The results show that for any specific application there is a characteristic power conversion efficiency that minimizes fuel consumption, and that efficiencies greater than this do not significantly improve fuel consumption. This type of powerplant appears to be a reasonably attractive investment if higher fuel costs continue.
    Keywords: AUXILIARY SYSTEMS
    Type: NASA-TM-X-71617 , E-8099
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 86
    facet.materialart.
    Unknown
    Solar energy to heat and cool a new NASA Langley office building (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A solar heating and cooling system will be installed at a new NASA office building. The objective of this project is to establish a full-scale working test-bed facility to investigate solar energy for heating and cooling buildings. The energy collected will provide between 80 and 100 percent of the heating and cooling requirements during the cool months and between one-half and two-thirds of the cooling requirements in the summer. Thermal energy storage will be provided to bridge the gap between cloudy and clear days.
    Keywords: AUXILIARY SYSTEMS
    Type: NASA-TM-X-71615 , E-8103
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 87
    facet.materialart.
    Unknown
    Long life, rechargeable nickel-zinc battery (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A production version of the inorganic separator was evaluated for improving the life of the nickel-zinc system. Nickel-zinc cells (7-10 Ah capacities) of different electrode separator configurations were constructed and tested. The nickel-zinc cells using the inorganic separator encasing the zinc electrode, the nickel electrode, or both electrodes had shorter lives than cells using Visking and cellophane separation. Cells with the inorganic separation all fell below 70% of their theoretical capacity within 30 cycles, but the cells constructed with organic separation required 80 cycles. Failure of the cells using the ceramic separator was irreversible capacity degradation due to zinc loss through cracks developed in the inorganic separator. Zinc loss through the separator was minimized with the use of combinations of the inorganic separator with Visking and cellophane. Cells using the combined separation operated 130 duty cycles before degrading to 70% of their theoretical capacity.
    Keywords: AUXILIARY SYSTEMS
    Type: NASA-CR-134658 , GOULD-742-031
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 88
    facet.materialart.
    Unknown
    Improved solution for potential flow about arbitrary axisymmetric bodies by the use of a higher-order surface source method. Part 2. User's manual for computer program (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The surface-source method of calculating potential flow is improved by refining the underlying numerical analysis. The present analysis uses parabolic elements and linearly-varying source density which results in a large increase in computing speed and accuracy. The computer program including all relevant input and output is described.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-134695 , MDC-J6627-02
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 89
    facet.materialart.
    Unknown
    Improved solution for potential flow about arbitrary axisymmetric bodies by the use of a higher-order surface source method. Part 1. Theory and results (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The surface-source method of calculating potential flow is improved by refining the underlying numerical analysis. The analysis uses parabolic elements and linearly-varying source density. The result is a large increase in computing speed and accuracy. The theory is described, and the effectiveness of the modification is illustrated.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-134694 , MDC-J6627-01
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 90
    facet.materialart.
    Unknown
    The effects of forward speed on fan inlet turbulence and its relation to tone noise generation (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The effect of forward speed on fan inlet turbulence was studied to determine the feasibility of using a wind tunnel to simulate various flight conditions where turbulence of atmospheric origin enters the engine inlet. The investigation was conducted in the Ames 7- by 10-foot Wind Tunnel with a small-scale low pressure-ratio fan. Results indicate that a wind tunnel of this size does produce large turbulence scale appropriate for simulation of atmospheric scale. But the tunnel's low turbulence intensity seems to cause results contrary to existing theories on the effects of fan inlet velocity ratio on turbulence scale. Limited results with artificially increased turbulence intensity removed this contradiction. Acoustic measurements showed the impact of inlet turbulence on fantone noise.
    Keywords: FLUID MECHANICS
    Type: NASA-TM-X-62381
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 91
    facet.materialart.
    Unknown
    Two stage low noise advanced technology fan. 1: Aerodynamic, structural, and acoustic design (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A two-stage fan was designed to reduce noise 20 db below current requirements. The first-stage rotor has a design tip speed of 365.8 m/sec and a hub/tip ratio of 0.4. The fan was designed to deliver a pressure ratio of 1.9 with an adiabatic efficiency of 85.3 percent at a specific inlet corrected flow of 209.2kg/sec/sq m. Noise reduction devices include acoustically treated casing walls, a flowpath exit acoustic splitter, a translating centerbody sonic inlet device, widely spaced blade rows, and the proper ratio of blades and vanes. Multiple-circular-arc rotor airfoils, resettable stators, split outer casings, and capability to go to close blade-row spacing are also included.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-134662 , PWA-5069
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 92
    facet.materialart.
    Unknown
    Unsteady Subsonic and Transonic Potential Flow over Helicopter Rotor Blades (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Differential equations and boundary conditions for a rotor blade in forward flight, with subsonic or transonic tip Mach number, are derived. A variety of limiting flow regimes determined by different limits involving blade thickness ratio, aspect ratio, advance ratio and maximum tip Mach number is discussed. The transonic problem is discussed in some detail, and in particular the conditions that make this problem quasi-steady or essentially unsteady are determined. Asymptotic forms of equations and boundary conditions that are valid in an appropriately scaled region of the tip and an azimuthal sector on the advancing side are derived. The equations are then put in a form that is valid from the blade tip inboard through the strip theory region.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-2463 , REPT-74-2
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 93
    facet.materialart.
    Unknown
    Flow in a discrete slotted nozzle with massive injection (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An experimental investigation has been conducted to determine the effect of massive wall injection on the flow characteristics in a slotted nozzle. Some of the experiments were performed on a water table with a slotted-nozzle test section. This has 45 deg and 15 deg half angles of convergence and divergence, respectively, throat radius of 2.5 inches, and throat width of 3 inches. The hydraulic analogy was employed to qualitatively extend the results to a compressible gas flow through the nozzle. Experimental results from the water table include contours of constant Froude and Mach number with and without injection. Photographic results are also presented for the injection through slots of CO2 and Freon-12 into a main-stream air flow in a convergent-divergent nozzle in a wind tunnel. Schlieren photographs were used to visualize the flow, and qualititative agreement between the results from the gas tunnel and water table is good.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-134505
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 94
    facet.materialart.
    Unknown
    Force sharing in high-power parallel servo-actuators (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The various existing force sharing schemes were examined by conducting a literature survey. A list of potentially applicable concepts was compiled from this survey, and a brief analysis was then made of each concept, which resulted in two competing schemes being selected for in-depth evaluation. A functional design of the equalization logic for the two schemes was undertaken and specific space shuttle application was chosen for experimental evaluation. The application was scaled down so that existing hardware could be utilized. Next, an analog computer study was conducted to evaluate the more important characteristics of the two competing force sharing schemes. On the basis of the computers study, a final configuration was selected. A load simulator was then designed to evaluate this configuration on actual hardware.
    Keywords: AUXILIARY SYSTEMS
    Type: NASA-CR-120469 , MR-E-1905
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 95
    facet.materialart.
    Unknown
    Fabrication and testing of negative-limited sealed nickel-cadmium cells (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Negative-limited sealed nickel-cadmium cells are a possible means toward increasing the life of nickel-cadmium cells to about a decade or more. The purpose of this program is to design, construct, and test 100, 20 Ah and 100, 30 Ah negative-limited sealed cells. The cell design was completed and hardware was ordered during the first quarter. Electrode fabrication was started in the first quarter and carried on through the second quarter. The fabrication and selection of the necessary electrodes has been completed during the third quarter. Cell construction has been completed and the preparatory cell cycling is underway. The preliminary testing to select the initial delivery cell has been started.
    Keywords: AUXILIARY SYSTEMS
    Type: NASA-CR-139374 , REPT-732-015-3
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 96
    facet.materialart.
    Unknown
    Linear viscous stability analysis of the stratified Bickley jet (1974)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: The stability of the stably stratified Bickley jet to small disturbances in a viscous, heat conducting fluid is explored by numerical integration of the governing differential equation. Curves of neutral stability are presented in the alpha-R plane and the parametric dependence of these curves upon Richardson number and Prandtl number is examined. The results show a curious bimodal behavior of the curve of neutral stability for small Richardson numbers. In addition, closed neutral curves are found for Richardson numbers in excess of the critical value for the inviscid flow. The unstable regions in the interior of these curves increase with decreasing Prandtl number. Energy balances are computed which show the relative magnitude of the Reynolds stress production, buoyancy dissipation, and viscous dissipation terms across the flow. As the thermal diffusivity becomes large compared with the kinematic viscosity, the buoyancy term is suppressed and the thermal stratification becomes irrelevant.
    Keywords: FLUID MECHANICS
    Type: Physics of Fluids; 17; May 1974
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 97
    facet.materialart.
    Unknown
    A study of forced flow separation in rocket nozzle (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The characteristics of flow profile in a rocket nozzle during the start transient were investigated as well as possibilities of reducing the side-load thrust by sticking trip wires in the nozzle. To simplify the geometry of flow configuration around the trip wire, it was assumed that the flow is passing through square steps instead of round wires. Since a purely analytic solution is not available, a series of semiempirical solutions was proposed.
    Keywords: FLUID MECHANICS
    Type: NASA-CR-120422
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 98
    facet.materialart.
    Unknown
    An experimental and numerical study of wave motion and upstream influence in a stratified fluid (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A system consisting of two superimposed layers of liquid of different densities, with a thin transition layer at the interface, provides a good laboratory model of an ocean thermocline or of an atmospheric inversion layer. This research was to gain knowledge about the propagation of disturbances within these two geophysical systems. The technique used was to observe the propagation of internal waves and of upstream influence within the density-gradient region between the two layers of liquid. The disturbances created by the motion of a vertical flat plate, which was moved longitudinally through this region, were examined both experimentally and numerically. An upstream influence, which resulted from a balance of inertial and gravitational forces, was observed, and it was possible to predict the behavior of this influence with the numerical model. The prediction included a description of the propagation of the upstream influence to steadily increasing distances from the flat plate and the shapes and magnitudes of the velocity profiles.
    Keywords: FLUID MECHANICS
    Type: NASA-TN-D-7744 , G-7440
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 99
    facet.materialart.
    Unknown
    Vibrational relaxation in expanding N2 and air (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: New N2 vibrational temperature data, obtained in expanding N2 and air using the electron beam technique, are analyzed permitting the vibrational relaxation times to be determined as a function of temperature. In addition, the effects on N2 vibrational relaxation times of direct vibrational energy transfer between N2 and H2O, between N2 and O2, and between N2 and free electrons introduced from arc contaminants are analyzed. The vibrational relaxation times determined from the present measurements agree with those measured in the expanding flows of shock tunnels and impact tubes. These expanding data also agree with relaxation times observed in acoustical resonant cavities where alternating compressions and expansions take place. The relaxation times in expanding flows (vib-tran exchange process) are found to be approximately 50 times faster than those measured in the compressing flow of shock tubes (tran-vib exchange process). This evidence strongly supports the concept that one relaxation time distribution cannot be applied to both exchange processes.
    Keywords: FLUID MECHANICS
    Type: NASA-TM-X-71988
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 100
    facet.materialart.
    Unknown
    Interference heating from interactions of shock waves with turbulent boundary layers at Mach 6 (1974)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An experimental investigation of interference heating resulting from interactions of shock waves and turbulent boundary layers was conducted. Pressure and heat-transfer distributions were measured on a flat plate in the free stream and on the wall of the test section of the Langley Mach 6 high Reynolds number tunnel for Reynolds numbers ranging from 2 million to 400 million. Various incident shock strengths were obtained by varying a wedge-shock generator angle (from 10 deg to 15 deg) and by placing a spherical-shock generator at different vertical positions above the instrumented flat plate and tunnel wall. The largest heating-rate amplification factors obtained for completely turbulent boundary layers were 22.1 for the flat plate and 11.6 for the tunnel wall experiments. Maximum heating correlated with peak pressures using a power law with a 0.85 exponent. Measured pressure distributions were compared with those calculated using turbulent free-interaction pressure rise theories, and separation lengths were compared with values calculated by using different methods.
    Keywords: FLUID MECHANICS
    Type: NASA-TN-D-7649 , L-9458
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...