ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

Ihre E-Mail wurde erfolgreich gesendet. Bitte prüfen Sie Ihren Maileingang.

Leider ist ein Fehler beim E-Mail-Versand aufgetreten. Bitte versuchen Sie es erneut.

Vorgang fortführen?

Exportieren
Filter
  • Artikel  (9.820)
  • Weitere Quellen
  • Artikel: DFG Deutsche Nationallizenzen  (9.820)
  • General Chemistry  (4.762)
  • Life and Medical Sciences  (1.790)
  • Analytical Chemistry and Spectroscopy  (1.700)
  • Cell & Developmental Biology  (1.499)
  • Chemical Engineering  (956)
  • Engineering  (612)
  • Earth model, also for more shallow analyses !
  • Niederschlag
  • Wiley-Blackwell  (9.820)
  • 2010-2014
  • 1990-1994  (5.050)
  • 1980-1984
  • 1970-1974  (1.739)
  • 1930-1934  (752)
  • 1925-1929  (1.099)
  • 1920-1924  (1.180)
  • 1990  (5.050)
  • 1970  (1.739)
  • 1933  (752)
  • 1927  (1.099)
  • 1921  (744)
  • 1920  (436)
Sammlung
  • Artikel  (9.820)
  • Weitere Quellen
Datenquelle
  • Artikel: DFG Deutsche Nationallizenzen  (9.820)
Schlagwörter
Verlag/Herausgeber
  • Wiley-Blackwell  (9.820)
Erscheinungszeitraum
  • 2010-2014
  • 1990-1994  (5.050)
  • 1980-1984
  • 1970-1974  (1.739)
  • 1930-1934  (752)
  • +
Jahr
  • 1
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 22-29 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Polymer blends of nylon 66 and thermotropic polyester with long flexible spacers in the main chains were prepared by melt mixing. The samples were made as single filaments by passing the polymer blend through a small and round die of a capillary rheometer. Mechanical properties of blends showed that the modulus and strength of nylon 66 could be improved without reduction of extensibility. The morphology of fractured surfaces was observed by a scanning electron microscope (SEM). It showed that the microfibrillar structure of a thermotropic polyester was formed by extensional flow while the spherical and ellipsoidal particles in the nylon 66 (matrix polymer) were produced by shear flow. The polyester particles were occasionally covered with adhering matrix polymer because of good adhesion between these two polymers. They were highly elongated by tensile stress without loss of elongational characteristics of blends. This fact was explained by very good adhesion between the two phases.
    Zusätzliches Material: 8 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 2
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 83-89 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The physical behavior of the diglycidyl ether of bisphenol A, cured with different concentrations of 2-ethyl-4-methylimidazole, was examined with dynamic mechanical and dielectric analyses, differential scanning calorimetry, and solvent extraction studies, ‘The network formation process was shown to depend strongly on the imidazole concentration’. At high imidazole concentrations, the gel point was characterized by a decrease in sol fraction, the crossover of the dynamic moduli and a rapid increase in viscosity. At low imidazole concentrations, the viscosity remained low until the sol fraction approached zero. For this system, the gel point, which occurred prior to the dynamic moduli crossover, was characterized by comparing the thermal properties of the network with the viscosity and dielectric behavior of the resin system during cure.
    Zusätzliches Material: 12 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 3
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 108-117 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: We examine several practically important problems, related to the mechanical behavior of dual coated optical fibers: low temperature microbending, evaluation of spring constant due to coating layers, strength of the end portions of fibers clamped in terminal fixtures, and prediction of stresses caused by the misalignment of the openings in the frame and in the terminal fixture. The developed formulas are simple, easy-to-use, and clearly indicate the role of the major factors affecting the mechanical behavior of the fibers. The obtained results can be of help in physical design of dual coated fibers and optical interconnections.
    Zusätzliches Material: 7 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 4
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 129-133 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The “Efficiency of Energy Absorption” (or “Efficiency”) and “Ideality” parameters were evaluated for several plastic foams and were found to be very useful in choosing an appropriate cushion for the protection of a specific product. The maxima in these parameters were found to be in the same range of stresses, when derived from dynamic measurements or from predicted stress-strain curves based on previously proposed “Reference” and “Modified Boltzman Superposition” Models. For the rate independent foams the maxima in these parameters do not change with strain rate and can therefore be derived from slow, constant rate (“static”) experiments. For rate dependent foams however, the maxima from “static” measurements were found to be in a lower range of stresses than those derived from dynamic ones. As a result, slow rate compressive measurements do not predict well the behavior of the foams during impact and the use of the “Reference” and “Modified Boltzman Superposition” Models is required for good predictions. It was found that the suffer PS and PE foams attain maximum Efficiency and Ideality at higher stresses than the more flexible PUR foams.
    Zusätzliches Material: 11 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 5
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 96-107 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Sudden changes of compressive strain-rate on glassy poly(methyl methacrylate) lead to the conclusion that the post-yield state under a constant stress is a state of steady flow in the polymer. Non-linearity between the stress divided by temperature and the logarithm of strain rate for this steady plastic flow can successfully be analyzed using the Eyring equation with structural factors variable depending on stress and temperature. This analysis gives a unique functional relationship between the activation entropy and the activation enthalpy, which agrees fairly well with that for the melt derived from the WLF equation. This agreement provides a direct evidence verifying structural change of the glass into liquid-like structure and enables us to recognize the conformational arrangement as an essential structural parameter controlling molecular mobility. Another experimental relation between the Eyring factors - the activation volume and the activation enthalpy - permits us to estimate the magnitude of an elementary volume for the molecular movement in the melt as a function of temperature. Moreover, the experimental finding of the steady flow in the glassy polymer motivated us to propose a transition mechanism from elastic deformation to plastic flow in which the internal viscosity or the activation volume is introduced as a single parameter representing the transient state of the structure.
    Zusätzliches Material: 16 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 6
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 118-123 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: An apparatus was designed and assembled to study the solvent removal from solution-cast thin polymer films. The computer interfacing of a thermogravimetric analyzer, spectrophotometer, electronic flowmeters, and control valves for the apparatus enabled the preprogramming of the carrier gas velocity, carrier gas solvent content, and temperature profiles to simulate the environment experienced in large parallel flow industrial driers. The apparatus has also been designed and operated to enable the visual observation of the drying film with an optical microscope. Initial experimental studies conducted with the apparatus involved the effect of temperature on solvent removal. The results indicate that high dryer gas temperatures can apparently cause skinning of the film surface resulting in slower solvent removal rates. The skin formation can be suppressed by higher solvent concentration in the carrier gas. The visual observations revealed the formation of standing waves in the film surface during drying at high gas velocities (〉2OO cm/min). The wave formation at least partially overcomes the effect of skinning by increasing the surface area of the film, and may be the manifestation of flow instabilities involving circulation within the film.
    Zusätzliches Material: 9 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 7
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 147-152 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Ultrasonically induced bubble formation for the production of thermoplastic foam was investigated experimentally and theoretically as a basic study. A general purpose polystyrene and blends of low density polyethylene and polyethylene wax were saturated with nitrogen gas under various pressures and the ultrasonic excitation was applied to the polymer system upon release of gas pressure. The ultrasonic nucleation of bubbles in the polymer matrix was modeled by utilizing the classical nucleation theory. The negative pressure generated by the ultrasonic excitation was considered as the environmental pressure at the moment of nucleation. The experimental results showed that the heterogeneous nucleation must be used for ultrasonic foaming of the viscous fluid and the homogeneous nucleation for the low viscosity fluid. The theoretical analysis also indicated that the ultrasonic nucleation can be applied to the production of thermoplastic foam if the ultrasonic excitation generates large enough negative pressure.
    Zusätzliches Material: 10 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 8
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 7-12 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Extrusion measurements have been carried out on blends of nylon 6 and a liquid-crystalline copolyesteramide (LCP). The flow curves at low temperature show a behavior similar to that of pure LCP with a rapid rise of the viscosity at low shear rates. At high shear rates the viscosity is lower than that for each of the two components. This minimum has been attributed to the lack of interactions between the two phases and to the formation of fibrils of the LCP phase. The SEM analysis shows, indeed, that fibrils of the LCP phase are produced in the convergent flow at the inlet of the capillary at high shear rates. These fibrils are lost during the flow in the long capillary.
    Zusätzliches Material: 12 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 9
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 124-128 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Rheological studies of an experimental liquid crystalline (LC) copolyester were carried out using a capillary rheometer and a cone and plate rheometer. Rheological characteristics of the polymer in the nematic state were observed. The nematic melt was found to be pseudoplastic and the degree of pseudoplasticity varied with shear rate. Melt viscosity was found to decrease with shear rate. Negative die swelling was observed at the exit of the capillary rheometer at temperatures marginally above the solid-nematic transition temperature of the polymer and was also found to be a function of shear rate. The dynamic mechanical properties of the polymer were studied as a function of temperature. The activation energies of flow and of dynamic mechanical deformation were calculated.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 10
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 137-141 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Ion beam mixing was used to improve the adhesion between deposited Cu film (400 Å) and polyimide (PI) substrate. Ar+ ion with the energy levels between 180 and 200 keV, and the dose between 1014 to 4 × 1016 ions/cm2 were used. The surface analyses were carried out by Rutherford Backscattering Spectroscopy (SEM). RBS analysis, using 2 MeV He+ ions, showed mixing of Cu and FI and the mixing depended on the Ar+ energy and dose. The X-ray study showed a very broad halo for deposited Cu film but the (111) peak appeared after the Ar+ implantation and the peak increased with Ar+ ion dose. Optical micrographs showed that Cu film formed circular bubbles after many thermal cycles when adhesion was poor and fracture cracks when adhesion was good.
    Zusätzliches Material: 7 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 11
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 153-161 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The general domain in which this work resides is that of mixing in creeping flows. Mixing, in this context, refers to the stretch of an interfacial line, or area in a strain field. The advancement of mixing technology is applied to the design of continuous mixers used in polymer processing. The geometric designs included single screw extruders, static motionless mixers, and co- and counter-rotating twin screw extruders. The co-rotating twin screw extruder was chosen to be studied in detail since it enjoys wide applications and, for which, little understanding of the contribution to mixing in the different screw geometries is known. In order to evaluate the rate of mixing for the non-uniform strain history flows, the method for measuring mixing had to be reexamined and broadened. An automated method has been developed which incorporates a digital camera and a computer to analyze the cross-sections of interest. Two measures of mixing - the correlation function and the distribution function - are developed to describe mixing in these regimes. These measures are applied successfully to the mixer geometries revealing subtle differences as to the nature of mixing in each.
    Zusätzliches Material: 14 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 12
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 175-186 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: This paper describes the shear imposed interfacial segregation of release systems for the facilitated attenuation of polyurethane (PU) adhesion to metal coun-terfaces using a RI-RIM system. It is shown that the migration rate of the dispersed release additives due to a shear imposed stress in the resin fluid is much greater than that arising from Fickian diffusion, thereby removing a vital constraint from conventional practice. The novel rotary injection RIM system is presented to simulate the on-line injection and shear induced interfacial segregation in model PU/abherent systems. A wide range of recipes comprising single (liquids or solids) and multicomponent (liquid-liquid and solid-liquid) release materials were injected into the polymerizing resin mixture to provide cohesively weak and friable “particle” boundary layer assemblies at the PU/metal interface. An instrumented Blister Test was employed to evaluate the quality of the molded interfaces in terms of adhesion and the concentration distribution of the injected species in the final cured moldings was determined through high pressure liquid chromatography (HPLC). A comparison of the results on the shear modified and the compounded interfaces confirm an accentuated lateral migration of the additives to the interface resulting in an appreciable diminution in the adhesion of the system. Finally, transport models are suggested to account for the observed augmented transport.
    Zusätzliches Material: 12 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 13
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990) 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 14
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 197-201 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: It is the purpose of the present publication to show that most of the phenomenological viscoelastic theories developed for bulk polymers can be readily adapted to plastic foams in order to evaluate their mechanical properties. In addition it will be demonstrated how the mechanical properties of open cell plastic foams can be predicted from a few simple compression and relaxation experiments.
    Zusätzliches Material: 7 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 15
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 211-218 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: We have extended the essential work of fracture technique to allow for the determination of the plane-strain essential work of fracture. The new technique is to measure the specific work of fracture as a function of ligament length in deeply double edge notched samples. This type of data is then experimentally corrected to remove the plastic work of fracture and leave only the essential work of fracture as a function of ligament length. By extrapolating the essential work of fracture to zero-ligament length, we claim to be measuring the plane-strain essential work of fracture. This new technique was applied to two rubber toughened nylons and to a series of polyethylenes. The plane-strain essential work of fracture was found to be independent of thickness. Where comparison can be made to J-integral testing, the plane-strain essential work of fracture was similar to the critical J-integral, JIc.
    Zusätzliches Material: 9 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 16
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 228-234 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The objective of this work has been to study composite systems in which carbon fibers are dispersed in a liquid crystal polymer matrix. The fundamental point of interest here has been the interfacial response that fiber surfaces can potentially induce in self-ordering polymers. The matrix material used was a thermotropic liquid crystal polyester synthesized in our laboratory from the monomers p-acetoxybenzoic acid, diacetoxyhydroquinone, and pimelic acid. The aromatic-aliphatic polymer was characterized by NMR as a chemically disordered polymer of the three structural units which exhibits a nematic phase at temperatures above 150°C. Breadline proton NMR above the solid to liquid crystal transition was used to measure the rate of magnetic alignment of molecules in the matrix and polarized optical microscopy was used to analyze interfacial zones in composite samples. Fiber surfaces were found to influence the orientation and orientational dynamics of a liquid crystal polymer matrix. This was revealed by enhanced rates of magnetic orientation in the polymer melt when carbon fibers are dispersed in the medium. Fiber surfaces were also found to stabilize nematic ordering of the polymer as the melt was heated towards complete isotropization. The phenomena discovered here may originate in the development of zones around fibers with a common molecular orientation anchored by the carbon surface.
    Zusätzliches Material: 10 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 17
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 241-248 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: A series of impact tests are described in which the plane strain fracture toughness, Kc1, of five different polymers is measured using a three point bend specimen at striker speeds up to 5m/s. At low speeds Kc1 is determined using the maximum load and a static analysis, but at speeds greater than 1 m/s the dynamic effects render the load signal unusable. For the higher speeds the fracture is timed using contact and crack propagation gages and the analysis is performed using the striker displacement at fracture. A dynamic analysis is used to convert this measurement to the true specimen displacement and Kc1 is determined from this. The apparent downward trends in the Kc1 results obtained, especially at speeds above 3m/s, are discussed.
    Zusätzliches Material: 14 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 18
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970) 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 19
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 3-3 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 20
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 2-2 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 21
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 5-32 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: The program given here assembles and solves symmetric positive-definite equations as met in finite element applications. The technique is more involved than the standard band-matrix algorithms, but it is more efficient in the important case when two-dimensional or three-dimensional elements have other than corner nodes. Artifices are included to improve efficiency when there are many right hand sides, as in automated design. The organization of the program is described with reference to diagrams, full notation, specimen input data and supplementary comments on the ASA FORTRAN print-out.
    Zusätzliches Material: 9 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 22
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 33-43 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: In the design of a guyed mast the design specification often imposes limits on the allowable deflection of the mast under wind and other lateral loads. While the deflected form of a mast depends on many different design parameters, the guy erection tensions form one of the simplest means of controlling the lateral displacements. The paper describes a procedure for calculating these tensions in the case of a mast required to have a specified set of displacements under a given set of lateral loads. It also discusses the case where specified deflections are not to be exceeded under a number of different loading conditions.
    Zusätzliches Material: 5 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 23
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 45-59 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: This paper is concerned with the development of a computational algorithm for the solution of the uncoupled, quasi-static boundary value problem for a linear viscoelastic solid undergoing thermal and mechanical deformation. The method evolves from a finite element discretization of a stationary value problem, leading to the solution of a system of linear integral equations determining the motion of the solid. An illustrative example is included.
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 24
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 61-71 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: The transient field problem of the type encountered in heat conduction problems is formulated in terms of the finite element process using the Galerkin approach. Curved two-dimensional and three-dimensional, isoparametric elements are used in a time-stepping solution and their advantages illustrated by means of several examples.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 25
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: The proposed finite element model is based on separate assumptions of interior and interelement displacements and on the assumed boundary tractions of each individual element. The associated variational functional for this model is presented. This method has the same merits of the assumed stress method (References 3 and 4) in that a compatible displacement function at the interelement boundary can be easily constructed, while it can easily be used for shells with distributed loads.
    Zusätzliches Material: 1 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 26
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 117-131 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A numerical method for the analysis of field problems is described. The algorithm is based upon the generalized Betti-Maxwell theorem. Using a set of known solutions to problems with similar boundary conditions produces a set of ‘integral’ equations for the required solution. Using any convenient numerical integration formula reduces the problem to the solution of a set of simultaneous algebraic equations. The accuracy of the solution depends upon the accuracy of the integration formula as applied to the problem under consideration and is independent of the known auxiliary solutions. The method is described in detail as applied to harmonic problems.
    Zusätzliches Material: 8 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 27
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 85-98 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: Considerable attention has been devoted in the literature on numerical methods towards securing energy convergence of solutions for, say, linearly elastic plate bending problems. Although energy convergence is necessary it by no means follows that the derived bending moments and shearing forces converge uniformly at a given point and it is this kind of feature which the engineer is really seeking.This question is examined in the context of a problem which is of particular interest to the civil engineering field and concerns the bending of a square plate under uniformly distributed load; the plate has simply supported edges and contains a central square hole with free edges. The solution to this multiply connected and mixed boundary value problem is obtained through a recently developed modification to the Rayleigh-Ritz method which has very general application and renders the solution mathematically valid up to the internal corner points where the bending moments are singular. Use is made of triangular equilibrium finite elements in conjunction with continuous eigenfunctions. Although it is already known that the order (i.e. the eigenvalue) of the singularity at the internal corners is available by inspection, it is an interesting feature of the present solution that a good approximation to the amplitude is also obtained by an inspection of the finite element results.
    Zusätzliches Material: 5 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 28
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 99-116 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: The convergence rates of eigenvalue solutions using two finite plate bending elements are studied. The elements considered are the well-known 12 degree of freedom, non-conforming rectangular element and the 16 degree of freedom, conforming rectangular element. Three problems are analysed, a square plate simply supported on two opposite sides with the other two sides clamped, simply supported, or free. Closed form, finite element solutions for these problems are obtained by using shifting E-operators.With few exceptions, eigenvalue solutions found with the non-conforming element converge from below the exact answers at an asymptotic rate of n-2, where n is the number of elements on a side. However, since the array size needed for such convergence is very large, little can be said about the convergence rates for practical arrays. The conforming element solutions converge from above at an asymptotic rate of n-4. A comparison of the errors involved in using these two elements shows that the conforming element is far superior to the non-conforming element.
    Zusätzliches Material: 9 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 29
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 145-146 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 30
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970) 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 31
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 146-147 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 32
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 133-144 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: This paper presents a labour-saving method of discretizing irregular and inhomogeneous two-dimensional continua into triangular elements. The method uses a magnetic pen to record node point data and a computer program to generate element data. This technique eliminates the tedium in the manual generation of data and the delay due to mistakes which would otherwise arise frequently for a complex mesh.
    Zusätzliches Material: 10 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 33
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 151-157 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A finite element formulation which includes the piezoelectric or electroelastic effect is given. A strong analogy is exhibited between electric and elastic variables, and a ‘stiffness’ finite element method is deduced. The dynamical matrix equation of electroelasticity is formulated and found to be reducible in form to the well-known equation of structural dynamics, A tetrahedral finite element is presented, implementing the theorem for application to problems of three-dimensional electroelasticity.
    Zusätzliches Material: 1 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 34
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 175-188 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A numerical method is presented for the solution of the radially symmetric heat conduction problem in a melting sphere. The method employs the embedding technique; this permits the solution to be written in the form of an ordinary integro-differential equation which is readily solved numerically by means of a forward integration scheme. The accuracy of the method is briefly discussed and numerical results for both constant and variable heat inputs are presented.
    Zusätzliches Material: 8 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 35
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 159-174 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: This paper is concerned with the development of general discrete models for the analysis of boundary-value problems in the first strain-gradient theory of elasticity. Extensions of the finite element method are constructed for this purpose, and general equations of motion are derived for finite elements of a class of micro-polar materials which are characterized by strain energy functions involving strains and second gradients of strains or displacements. The notion of generalized nodal doublets is introduced. The problem of a composite consisting of a strain-gradient sensitive microlayer embedded between semi-infinite bodies is examined as an example problem. Some of the results are compared with available exact solutions.
    Zusätzliches Material: 7 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 36
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: Methods for the analysis of complex, highly redundant structures subjected to intermittent loads causing biaxial membrane stress and stress reversal into the plastic range are presented. The Bauschinger effect in multi-axial stress is taken into account by the use of Ziegler's modification of Pragers kinematic hardening theory. The implementation of this plasticity theory in the discrete element methods involves the application of the loading in small increments. A linear relationship between increments of plastic strain and of stress, arising out of the theory, is used in conjunction with a linear matrix equation that governs the elastic behaviour of the structure. In the latter equation, plastic strains are interpreted as initial strains. A solution to the linear matrix equation, expressed in terms either of stress or of total strain, may be obtained by utilizing one of two alternative procedures. The methods are capable of treating materials which exhibit elastic-plastic behaviour involving ideal plasticity, linear or non-linear strain hardening, or limited strain hardening. Application is made to several representative structures. Comparison of some of the results with existing test data for both monotonic and reversed loading shows good correlation.
    Zusätzliches Material: 7 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 37
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 221-228 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A general digital computer method based on a Sturm sequence procedure is described for determining the natural frequencies and associated modes of undamped free vibration of frames and other structures whose stiffness and mass matrices are of band form. A program which uses the method for the analysis of plane multi-storey building frames is outlined, and numerical results are presented for a simple test case and for a 19-storey frame.
    Zusätzliches Material: 2 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 38
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 207-219 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A newly developed numerical Laplace transform inversion technique is described. A derivation of the method, termed the ‘multidata method’, is presented along with a description of a similar collocation method. Similarities and differences between the two numerical methods are described and discussed. Results of parameter studies of both methods are presented which demonstrate the sensitivity to error displayed by the collocation method and the magnitude of the improvement in accuracy obtainable with the multidata method as compared with the collocation method, especially when errors exist in the function to be inverted.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 39
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 229-241 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: In this study, finite element solution procedures are developed for an elastica problem of inextensible beams. The element stiffness matrices are obtained by using Galerkin's method. Results of a numerical example compare reasonably well with those obtained by using the elliptical integral.Extensions of this research are currently being made to include membrane effects of beams and to develop plate element stiffness matrices for elastica problems of plate structures.
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 40
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 243-252 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: This report summarizes an experimental application of the finite element approach to two-dimensional inviscid fluid flow.The method results in a matrix equation relating the vector of velocities at the nodal points with the vector of singularities. The singularities, which are concentrated at the nodes, consist of a source and a vortex.On solution of this equation (defining the flow in the region), boundary conditions must te stipulated. This usually involves setting the internal singularities to zero and making certain modifications ro those lying on the boundary of the region.Some results of the application to a particular problem are included in the paper.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 41
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 253-257 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: Some typical results of an extensive series of evaluations of parallelogram-shaped plate bending elements with increasing levels of sophistication are presented. It is shown that, contrary to experience in other fields of stress analysis, this sophistication does not lead to striking improvements in accuracy in the solution of simple rectangular and skew plate problems. A computational procedure is described whereby stiffness matrices may be automatically generated from the minimum of input data specifying the displacement modes prescribed for the element.
    Zusätzliches Material: 2 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 42
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 259-264 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A conforming plate bending solution using simple polynomial deflection functions of third-degree inside each triangular element is presented. In order to avoid normal slope discontinuities along the sides of the elements, the plate displacement parameters are subjected to ‘slope continuity conditions’ acting as constraints to the minimum potential energy problem. This is then solved by the classical method of Lagrange introducing multipliers as new auxiliary variables. If a special variational formulation of the problem is used, it can be shown that the Lagrangean multipliers are generalized stress parameters. The suggested solution is therefore basically a ‘mixed’ solution, the unknown variables of the problem being both displacement and stress parameters. Several numerical results are presented.
    Zusätzliches Material: 2 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 43
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 265-275 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: Approximate formulations of non-uniform beam element stiffness matrices for dynamic and elastic instability analysis are derived. Displacement functions for the uniform beam segment are employed in this development. Moment of inertia and area of the element are prescribed by arbitrary powers of the axial co-ordinate. Numerical results are obtained and compared with both analytical solutions and numerical solutions based upon stepped representations using uniform section elements. The significance of the inclusion of taper considerations within individual elements upon solution accuracy and convergence characteristics is also examined. This subject problem and solution approach demonstrates that the upper bound character of minimum energy solutions may be difficult to exploit under practical circumstances.
    Zusätzliches Material: 8 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 44
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 277-282 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: This article describes-a new method, suitable for use on a digital computer, for evaluating the singular double integral of Hayes which determines the transonic wave drag of a slender body. Comparison with known exact results and with an earlier computer program described by Eminton shows the present method to be accurate as well as economic in computer time.
    Zusätzliches Material: 2 Tab.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 45
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 283-293 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: The complementary variational principle has been used to derive the differential equations and the associated boundary conditions of the vibrating plate in terms of bending moments. It is shown that in this formulation, the plate possesses an infinite number of zero frequency modes in which the plate remains in a state of constant strain under a set of self-equilibrating bending moments. In applying the Rayleigh Ritz procedure for the non-zero frequency modes of the plate, it is shown that it the assumed functions are orthogonal to only a finite number of zero frequency modes, then one may obtain frequencies which are lower than the true frequencies of the plate. An iliustrative example is given in the paper.
    Zusätzliches Material: 1 Tab.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 46
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 47
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 299-299 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 48
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 301-303 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 49
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970) 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 50
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 307-310 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: Convergence of a finite element procedure for the solution of the fourth-order equations is proved. A generalization of this result is mentioned and some remarks concerning the numerical results obtained at the Computing Centre of the Technical University in Brno are given.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 51
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 311-333 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: Digital filters are finding wide applications in signal processing aspects of such fields as engineering, geophysics and biosignal analysis. The design of a digital filter and its realization with near minima computer word length are two problems which can be solved by computer-aided design techniques In this paper, the automated design of the initial filter (recursive type) only is considered. Both of the basic design methods - the direct and indirect approaches - have been analysed, and compute programs have been written to implement the various design techniques. The present program are limited to the design of flat loss type filters specified by their gain rather than their phase character istics. although provision has been made to allow for other types of design in the indirect approach Design examples are given, and the results analysed with a view to the suitability and limitations of the different design techniques.
    Zusätzliches Material: 9 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 52
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 353-361 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: This paper demonstrates the applicability of general non-linear programming methods to the solution of buckling problems. The minimum energy formulation of the buckling condition is shown to yield an unconstrained non-linear programming problem, for which several numerical methods of solution are readily available. Some of these methods are discussed and numerical results are presented for stiffened plates with in-plane as well as lateral loads.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 53
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 335-352 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: Stiffness matrices are formulated for the torsional and lateral stability analysis of structures composed of flexural members by the matrix displacement method. The formulations are based upon approximate displacement fields which represent the action of the element in simple flexure. Example problems, for which exact solutions are known, illustrate the accuracy and convergence characteristics of the derived formulations.
    Zusätzliches Material: 8 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 54
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 363-385 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A solution has been formulated, which allows one to analyse all the major performance characteristics in a chain of impacting elastic ‘rods’. By allowing one end of the elastic chain to impact against a surface which resists penetration according to a specified penetration law it is possible to analyse the impact system of a variety of mechanical devices such as percussive tools and squeeze film dampers. Virtually, unlimited variety in the number and geometry of the impacting rods, and virtually unlimited complexity in the form of the reaction of the terminal face is permitted. A computer program for treating one or two elastic rods has been developed. The program prints out all important stresses as well as the stress history at several selected points. It also prints out the depth of penetration, the energy transferred from rod to rod, the overall energy transfer into the receiver, rebound velocities and times of separation between rods and between rod and 4receiver. Agreement with exact solutions and experiments is demonstrated.
    Zusätzliches Material: 14 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 55
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 387-395 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A technique of differential displacements is presented whereby problems involving elastic contact are solved by the finite element method. The technique is applied to axisymmetric situations in which statically indeterminate conditions occur and is shown to provide a means for resolving these conditions in terms of contact stresses. Three typical engineering problems are analysed to demonstrate the technique in cases where body forces, thermal gradients and external applied forces are acting.
    Zusätzliches Material: 8 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 56
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 415-418 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: Recent advances in finite element techniques have enabled full three-dimensional stress analyses to be undertaken. Economy and accuracy can only be achieved simultaneously if the characteristics of the element are understood. Preparatory work is described in which suitable pitching and disposition of brick-type elements are established for the analysis of cylinders.The information derived is put to use in the analysis of a cylinder-cylinder intersection. A favourable comparison is made with an independently computed solution.
    Zusätzliches Material: 3 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 57
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 397-414 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: The velocity field of a semi-contained turbulent jet, as constructed by Abramovich, is used to arrive at the temperature distributions in the initial region of a turbulent flow film cooling situation taking into account both the development of the jet boundary layer and the wall boundary layer. After suitable profiles of eddy thermal conductivity are established, a finite difference form of the thermal energy equation is derived, shown to be unconditionally stable, and solved numerically with the aid of an IBM System 360 computer to yield the temperature distributions. Wieghardt's parameter for collapsing the temperature profiles onto a single curve in film cooling situations, when suitably modified, also collapse the analytical results to essentially a single curve even as near as 2·7 slot heights from the injection point, thus verifying the temperature similarity in film cooling which has been experimentally observed even very near the injection point. Results in graphical form are presented which allows one to construct the actual temperature profile for a fairly wide range of the relevant parameters.
    Zusätzliches Material: 15 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 58
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970) 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 59
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 453-454 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Zusätzliches Material: 1 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 60
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 419-451 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A general formulation for the curved, arbitrary shape of thick shell finite elements is presented in this paper along with a simplified form for axisymmetric situations. A number of examples ranging from thin to thick shell applications are given, which include a cooling tower, water tanks, an idealized arch dam and an actual arch dam with deformable foundation.A new process using curved, thick shell finite elements is developed overcoming the previous approximations to the geometry of the structure and the neglect of shear deformation.A general formulation for a curved, arbitrary shape of shell is developed as well as a simplified form suitable for axisymmetric situations.Several illustrated examples ranging from thin to thick shell applications are given to assess the accuracy of solution attainable. These examples include a cooling tower, tanks, and an idealized dam for which many alternative solutions were used.The usefulness of the development in the context of arch dams, where a ‘thick shell’ situation exists, leads in practice to a fuller discussion of problems of foundation deformation, etc., so that practical application becomes possible and economical.
    Zusätzliches Material: 25 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 61
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Zusätzliches Material: 2 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 62
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 459-476 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: The stiffness equation is derived for curved elements of orthotropic axi-symmetric thin shells, and equivalent applied loads are found for shells subjected to initial strains, applied surface loads and body forces. The Lure approximation of thin shells and displacement field approximation by polynomials of arbitrary degree are included in the formulae derived.
    Zusätzliches Material: 11 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 63
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 477-494 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A computational procedure based on gradient iterative techniques is proposed for the solution of large problems to which the finite element method is applicable. In linear problems the procedure can be used either for solving the set of algebraic equations or for the complete inversion of the matrix of coefficients. Special attention is focused on the practical aspects of the procedure concerning its realization on the digital computer.
    Zusätzliches Material: 7 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 64
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 495-507 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A finite element method to determine unsteady aerodynamic influence coefficients, consistent with the stiffness and inertia properties of a lifting surface in supersonic flow, is described. This is basically a kinematic method, which reduces the dynamical equations of a non-conservative system to a simple and elegant form. It is illustrated by application to a delta wing using triangular elements to calculate steady and unsteady lift and moment coefficients. Throughout the calculations only a coarse grid system has been employed and the answers have been compared with available results.
    Zusätzliches Material: 7 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 65
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 509-522 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A simple program carrying out various vector operations in two- or three-dimensional spaces is presented. The listings are given in A.S.A. FORTRAN IV. The program is of particular application in various forms of three-dimensional and shell analysis as it can create and transform locally orthogonal co-ordinates, etc. While these applications motivated its design, it is of very general use one such application is illustrated by applying the program to general perspective projection.
    Zusätzliches Material: 1 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 66
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 523-533 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A procedure is presented for the automatic renumbering of network type equations prior to solution by sparse matrix techniques. The method takes an arbitrary input sequence and creates an order which makes possible solution of complex network systems by reducing demand for computer storage and time.Examples are presented to demonstrate the procedure in action and show that, even in cases where the system has been carefully numbered, considerable improvement can be achieved. The procedure is also applicable to band matrix solution techniques.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 67
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 579-595 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: The feasibility of achieving a preassigned stress state by changing the stiffness of determinate and indeterminate pin connected structures is presented. A new force method with all element forces (or stresses or areas) as independent variables is developed. The possibility but futility of getting the element areas by inverting and pre-multiplying the coefficient matrix with the external load vector when areas are chosen as variables is shown. The relationship existing between the compatibility equations and the plastic strength of pin connected structures is illustrated. Possible design methods for trusses under single or multiplicity of load conditions, the design of truss geometry and the relations between fully stressed and minimum weight structures are examined and illustrated through several examples.
    Zusätzliches Material: 11 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 68
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 563-577 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: This paper deals with solving two-dimensional variational problems of second- and third-order by the finite element method. To each meshpoint are associated three or six basic functions of class C1 or C2. The expression of the admissible functions on a triangular and rectangular element are given here in a general form which is specially suitable for computation.
    Zusätzliches Material: 8 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 69
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 535-549 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: The eigenvalue method is well-known as an aid to the solution of a wide range of engineering problems. In power system analysis it has relevance to travelling wave phenomena,1 sensitivity and dynamic stability in synchronous multimachine2 systems, critical speed calculation, vibration of structures and other related topics. The method of numerical solution of eigenvalues depends on the size and nature of the problem and often where large matrices are involved presents great difficulties.This paper describes in detail the application of the escalator method and diakoptics to large eigenvalue problems. The escalator method is a well-established one which consists of a systematic way of escalating from a 2 × 2 matrix up to any desired order in steps of one row and column at a time. The diakoptical method reduces computer storage, calculation time and improves accuracy. This results in the more economical solution of large and complicated problems which cannot be conveniently solved by any orthodox method. The paper deals with problems of degeneracy and means of overcoming these by simple routine processes. It concludes by indicating the particular advantages of the method and its usefulness for a wide variety of general engineering problems.
    Zusätzliches Material: 3 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 70
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 551-561 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A novel integral equation technique is employed for the analysis of dynamic stability problems. The governing equation of the linearized parametric resonance problem is transformed into an integral equation. The kernel of the integral equation is computed as the influence function for the deflection and/or bending moment of a corresponding beam.The highest derivative of the governing function (in our case fourth derivative of the displacement function) is chosen as the basic unknown. Using the formal analogy with the differential equation of the beam flexure this highest derivative is comprehended as some unknown transverse ‘load’. The distribution of this ‘load’ is a priori assumed to be polygonal. Using elementary methods of structural analysis, the displacements due to the assumed ‘load’ are determined. These displacements, arrayed into a square matrix, approximate the kernel of the governing integral equation.The subsequent procedure via Hill's determinant is a conventional one. The results prove to be accurate enough even for a very modest number of points of integration. This reflects the fact that the method is based on numerical integration rather than on numerical differentiation.
    Zusätzliches Material: 3 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 71
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 2 (1970), S. 597-600 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: In any mesh, rules exist that interrelate the number of internal and external sides, vertices, etc. and the total number of elements. These are given explicitly for plane meshes of triangles and quadrilaterals, and for solid meshes of tetrahedra and cuboidal elements. The method is quite general and discovers all such independent rules that exist. Thus, for a plane mesh of T elements having Vi internal and Vb boundary vertices and Si internal and Sb boundary sides, then \documentclass{article}\pagestyle{empty}\begin{document}$$\begin{array}{l} T = \frac{1}{3}\left({S_b + 2S_i} \right) = V_b + 2V_i + 2H - 2\quad{\rm (for\,triangular\,elements)}\\ T = \frac{1}{4}\left({S_b + 2S_i} \right) = \frac{1}{2}\left({V_b + 2V_i} \right) + H - 1\quad{\rm (for\,quadrilateral\,elements)} \\ \end{array} $$\end{document} where H is the number of internal boundaries (holes) there might be. For solid meshes, these two-dimensional equations relating elements to sides generalize to \documentclass{article}\pagestyle{empty}\begin{document}$$ \begin{array}{l} T = \frac{1}{6}\left({F_b + 2Fi} \right){\rm\quad (for\,cuboid\,elements)} \\ T = \frac{1}{4}\left({F_b + 2Fi} \right){\rm\quad (for\,tetrahedral\,elements)} \\ \end{array} $$\end{document} where there are Fb boundary and Fi internal faces. Unfortunately, there is no direct generalization of the two-dimensional equations relating vertices and elements: it is only possible to do this by including the Ei internal and Eb boundary edges: \documentclass{article}\pagestyle{empty}\begin{document}$$ \begin{array}{l} T = \frac{1}{8}E_b + \frac{1}{2}\left({E_i - V_i + H - h - 1} \right){\rm\quad (for\,cuboid\,elements)} \\ T = \frac{1}{3}E_b + E_i - V_i + H - H - 1{\rm\quad (for\,tetrahedral\,elements)} \\ \end{array} $$\end{document} where there are H through holes and h cavities.
    Zusätzliches Material: 3 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 72
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990) 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 73
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 385-393 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: We have developed a new method to measure the true temperature of the polymer melt and its three-dimensional distribution of a shot stored in the reservoir during injection. By means of this method, it is demonstrated that the temperature distribution of the polymer melt stored in the reservoir is strongly dependent on the setup molding conditions, the polymer investigated, and the geometry of the screw used. Further, it is noted qualitatively that there are two major effects of screw geometry on the temperature distribution of polymer melts. One, which governs strongly the temperature in the high temperature zone, is shear heat generated within the polymer itself in the metering zone of the screw during the transporting process. The second is the ability to preheat and plasticate the polymer in the compression zone, which is indispensable for uniform plastication.
    Zusätzliches Material: 17 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 74
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 437-443 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The breaking strength, strain at break, and work to rupture of perfect fibers prepared with polymers of finite molecular weight are calculated by treating the perfect fiber as a stressed crystal undergoing a crystal-melt phase transition. In this view, a tensile load destabilizes the crystal and depresses its melting point. When the load is sufficient to lower the melting temperature to the ambient condition the fiber melts - i.e., fails. The theoretical equations (extremely simple) are applied to several common polymer fibers. The maximum tensile strength of polyethylene, for example, is calculated to be 7 to 9 GPa, in good agreement with current experimental results.
    Zusätzliches Material: 2 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 75
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Vinyl polymers containing pendant acetal groups were synthesized using (2,2-dimethyl-l,3-dioxolan-4-yl)methyl acrylate (DMA) and (2,2-dimethyl-l,3-dioxo-lan-4-yl)methyl methacrylate (DMM), and were evaluated as negative electron beam (EB) resists. It was found that the EB sensitivity of polymers containing acetal groups in the side chain was higher than that of polymers containing acetal groups in the main chain. A high sensitivity of 3.6 × 10-8 C/cm2 was observed. Copolymers of DMA or DMM with styrene were also synthesized in order to improve the durability for dry etching process. It was found that the copolymers had an excellent dry etching durability and were adaptable to EB lithography.
    Zusätzliches Material: 5 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 76
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 453-458 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The thermal behavior of poly(etheretherketone)(PEEK) film heated in an open differential scanning calorimetry (DSC) pan at 20°C/min is distorted by relaxation of the strained film. PEEK film in a closed pan or quenched PEEK in open or closed pans shows a glass-transition temperature (Tg) around 144°C, cold crystallization (∼22 J/g) at 177°C, melt-temperature (Tm) peaking at 335-340°C, with an enthalpy of fusion of 32-34 J/g, and recrystallization on cooling at 285°C, with a crystallization exotherm of about 40 J/g. The enthalpy of fusion decreases with increasing heating rate from 2-100°C/min and approaches the enthalpy of cold crystallization. With increasing heating rate, further crystallization of PEEK during the DSC scan is suppressed. With increasing cooling rate, PEEK melt crystallizes at larger supercoolings to a lesser extent. Crystallization on cooling the melt was more complete than cold crystallization and annealing on heating.
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 77
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 459-468 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The electrical and dielectric properties of compression-molded segregated polyethylene-carbon black mixtures are described in the frequency range between 10 and 8000 kHz as a function of frequency, temperature, and carbon black loading. The segregated systems investigated exhibit insulator-conductor transitions in the range 0.25-0.65% (volume/volume) carbon black. The dielectric constant and the dissipation factor of the conductive samples are relatively very high in the frequency range studied. The dielectric constant increased sharply with the carbon black concentration, and then increased moderately beyond the insulator-conductor transition. The dissipation factor-concentration curves for different carbon blacks show maximum values in the vicinity of the critical concentration values. The dielectric properties of these systems are discussed in terms of interfacial Maxwell-Wagner polarization effects.
    Zusätzliches Material: 9 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 78
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 476-479 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The heat capacities of isotactic polypropylene and its composite with glass fiber have been measured at high pressure, up to 7 MPa, in the melt state by high pressure differential scanning calorimetry (HPDSC). The values also have been calculated from the data of specific volume (V) measured by dilatometry and thermal conductivity (κ) and thermal diffusivity (α) measured by a compensating hot wire method. The values of the heat capacity measured from HPDSC are consistent with those from the calculation method. The heat capacities of molten polypropylene and its composite increase linearly with temperature at a constant pressure and decrease with pressure at a constant temperature. It was found that the heat capacity of polypropylene is insensitive to molecular weight. The heat capacities of molten polypropylene composites are found to be predicted by an additive rule from the weight fractions of heat capacities of polypropylene and glass fiber.
    Zusätzliches Material: 7 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 79
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 480-484 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The mutual diffusion coefficients for styrene-butadiene rubber (SBR)-ethylbenzene systems were measured using a sorption apparatus with a quartz spring at 100 and 130°C for mass fractions of ethylbenzene ranging from 0 to 0.17. The mutual diffusion coefficients were correlated with good agreement by the free-volume theory.
    Zusätzliches Material: 7 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 80
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990) 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 81
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 485-489 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Polymers were prepared from saturated (HMDS) and unsaturated (AN) monomers in a radio frequency discharge (plasma). The effect of selected parameters such as electrode type (such as Cu, Zn, Ni, Al), reactor type, and substrate temperature (other parameters constant) on chemical structure and the rate of polymer deposition was examined by Fourier transform infrared (FTIR) spectroscopy. Differences in the nature of electrodes and reactor types were found to yield similar plasma products with similar rates of deposition for two monomers. In the tubular reactor used, deposition rates were observed to decrease with increasing substrate temperatures showing different dependencies on temperature for the monomers tested.
    Zusätzliches Material: 10 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 82
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 469-475 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The dielectric and magnetic properties of polystyrene composites containing barium or nickel-zinc ferrites were studied as function of the ferrite concentration and field frequency. The composites were prepared by methods yielding a random distribution of the ferrite particles or segregated structures. Barium ferrite-poly-styrene composites exhibited a typical insulator behavior, and only above 60% ferrite were high values of the dielectric properties noted at the lower frequencies, decreasing gradually with frequency to the low values typical of the higher frequencies. The mode of barium ferrite particle distribution did not affect the dielectric properties. The nickel-zinc ferrite systems demonstrated a conductor type behavior. An apparent insulator-conductor transition was observed, having lower values for segregated than for random distributions. The magnetic permability of barium ferrite-polystyrene composites above 10% ferrite increases with the ferrite concentration, whereas the magnetic dissipation factor steeply increases with concentration above 40% ferrite.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 83
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 493-510 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Morphology and properties of polymer alloys can be controlled by thermody-namlcally reversible (structure freeze-in) or irreversible (structure lock-in) processes by simultaneously manipulating miscibility, mechanisms of phase separation, glass transition temperature (structural relaxation), and cure kinetics of polymer systems. Using phase diagrams consisting of binodal and spinodal curves, the morphology of epoxy/CTBN (carboxyl-terminated butadiene acryloni-trile copolymer) systems can be controlled by the mechanism of nucleation and growth or by spinodal decomposition via simultaneously manipulating the kinetic processes of phase separation and curing reactions. We have found that the particle size of the rubber reinforcement in epoxies is affected by the mechanisms of phase separation. Phase separation by nucleation and growth gives larger rubber particles than the corresponding phase separation by spinodal decomposition. This contrast in the morphology development is the consequence of controlling phase separation through chemorheological behavior. Medication of the phase separation kinetics in epoxy/CTBN systems was extremely effective at altering both morphology and properties of these alloys. This technique offers a means to shift the glass transition temperature of the rubber-rich phase drastically without reducing the glass transition temperature of the epoxy-rich phase significantly. Such control over morphology is the key to ultimately controlling material properties. This morphology manipulation allows us to tailor the mechanical properties of alloy systems.
    Zusätzliches Material: 16 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 84
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 511-518 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Blends of polypropylene (PP) and ethylene-propylene rubber (EPR) and blends of polystyrene (PS) and styrene-butadiene rubber (SBR) were prepared in a laboratory-scale internal mixer at various blend compositions and rotor rates. Blend morphology was studied by means of electron microscopy. For each blend pair under the given processing conditions, the phase inversion process occurred progressively with respect to the variation in blend composition; it is within this composition range of phase inversion that dual-phase continuity was observed. In addition, Characteristic torque values of blends were found to deviate negatively from a linear additivity rule; the composition range of maximum deviation from linear additivity corresponded approximately to the composition range where dual-phase continuity was observed. Sperling's predictive scheme was found to yield acceptable (although not completely satisfactory) estimates for compositions of dual-phase continuity in the present systems. It was also observed that partial cross-linking of SBR during the mechanical blending process, as suggested by the appearance of a cure peak in the torque curve and supported by infrared spectroscopic evidence, resulted in morphological features drastically different from those of the uncured blends.
    Zusätzliches Material: 10 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 85
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 519-526 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Blends of an engineering thermoplastic, poly(ethylene terephthalate) (PET), and two liquid crystalline polymers (LCPs) viz., copolyesters of PET and parahydrox-ybenzoic acid (PHB) in 40/60 mole percent (LCP60) and in 20/80 mole percent (LCP80) were prepared. A blend of LCP60 and LCP80 in 50/50 weight percent (LCP60-80) was blended with PET. Both flat films and rods were extruded and their properties examined. The morphology of the films investigated using Scanning Electron Microscopy (SEM) revealed that the LCP phase remained as dispersed droplets in the PET matrix. In spite of the lack of fibrillation in these films, the mechanical properties were enhanced to some extent with a maximum at 10 weight percent of the LCP phase. However, in the case of the rods thin fibrils of the LCP phase of the order of 1 μm in diameter were observed provided the composition of the LCP was 20 weight percent or greater. This success In achieving fibrillation is through to be due to the extensional flow fields present at the entrance of the capillary die and the fact that a short L/D ratio die was used. Differential Scanning Calorimetry (DSC) thermograms of the extruded films indicated that the LCP phase may act as a nucleating agent for the crystallization of PET. Rheology of the blends revealed that the complex viscosity of the blends is not much different from that of pure PET. This is attributed to the partial miscibility of the two components. Based on the DSC results and residence times in the extruder, it is concluded that no significant transesterification reactions appear to have: taken place in the blends. The rheology is studied further with respect to the cooling behavior of the pure components and factors important to the fibrillation of the LCP phase and the formation of in-situ reinforced composites are discussed.
    Zusätzliches Material: 7 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 86
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 618-618 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 87
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Eight commercial semiconductor grade epoxy compounds that are used to encapsulate 1C (integrated circuit) devices have been evaluated for their ability to minimize the development of thermal stresses which can cause failure during device temperature cycling. Thermal expansion, dynamic modulus and adhesion studies are used to describe the mechanical interaction between the plastic package and the silicon device it surrounds. A “figure of merit” is defined for the development of stress on the 1C device as it is cooled after the packaging process. The stress is shown to be proportional to the product of three terms: (αp-αs) Ep (Tanch-T) where αp and αs are the expansion coefficients for the plastic and silicon, respectively, Ep is the modulus of the epoxy and Tanch is the temperature at which the epoxy becomes anchored to the silicon device during transfer molding. In addition, the importance of good adhesion between the epoxy encapsulant and the silicon device to prevent package cracking has been demonstrated by finite element analysis and a novel adhesion test.
    Zusätzliches Material: 16 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 88
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 603-608 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Covalent grafting of mesogenic chains on carbon fiber surfaces was attempted as part of a study on composite materials containing liquid crystal polymer matrices. Grafting in these composite systems is viewed not only as a mechanism to achieve interfacial bonding but also as an approach to modify the interphase physical structure. The synthetic approach to grafting involved the in-situ polymerization of monomers in the presence of functionalized fibers in order to grow chains covalently attached to the fibers. The chemical mechanism may be viewed as the “transesterification of car boxy lated fibers” with acetylated monomers. The monomers used were pimelic acid, p-acetoxybenzoic acid and diacetoxy hydroquinone which are known to yield upon condensation a chemically aperiodic nematic polymer. Evidence for grafting was obtained from X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) analysis on fibers retrieved from composite samples. Interestingly, SEM micrographs of fractured composite specimens containing the mesogen-grafted fibers reveal excellent wetting and interfacial bonding of a liquid crystalline matrix on the carbon surfaces. Based on theoretical considerations for end-adsorbed macromolecules and the nematogenic nature of the grafted chains we infer that dense layers of adsorbed polymer may form at the interfaces studied. From a materials point of view the in situ growth of liquid crystal polymer chains on fibers may offer mechanisms to control composite properties through both bonding and molecular orientation in interfacial regions.
    Zusätzliches Material: 9 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 89
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: We present chain structure, phase morphology, and toughness relationships in thermoplastic polymers and polymer/rubber blends. In neat polymers, molecular aspects of craze/yield behavior are controlled by two chain parameters: entanglement density νe and characteristic ratio C∞. The crazing stress is proportional to νe1/2, and the yield stress is proportional to C∞. The dispersed rubber toughens a polymer/rubber blend mainly by promoting energy dissipation of the matrix. The toughening efficiency correlates with the rubber phase morphology and the chain structure of the matrix.
    Zusätzliches Material: 7 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 90
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 762-768 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The positron annihilation lifetime spectroscopy (PALS) technique is used to measure volume relaxation in physically aged glassy polycarbonate. The relaxation times and activation energy calculated for the isothermal relaxations in the aged polycarbonate are greater than those parameters calculated for unaged polycarbonate. The activation energy of 8.2 kcal/mol in the aged polycarbonate is used to identify the phenyl group motion or the cooperative carbonate-phenyl interaction as the molecular features responsible for the thermally induced open volume relaxations. It is postulated that the open volume relaxation kinetics as measured by PALS can be used as a nondestructive indication of property differences between aged and unaged polycarbonate.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 91
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 769-775 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The effect of added silica on the spherulite radial growth rates of isotactic poly(propylene oxide) (i-PPrO) has been investigated by optical photomicroscopy. Two different i-PPrO samples were used of different molecular weights and isotacticity, 87 and 100% as determined by 13C NMR. The addition of fine particle silica, an effective nucleating agent, depresses the spherulite growth rates throughout the entire temperature range, but the effect is more dramatic for the i-PPrO of lower isotacticity. For a given sample, the retardation increases as the quantity of filler increases. The growth rate-temperature behavior is analyzed in terms of the classical Hoffman-Lauritzen equation, modified to take into account the polymer-filler interaction.
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 92
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 835-840 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The effects of different cure procedures on the structure and properties of epoxy samples made from diglycidyl ether of bisphenol A (DGEBA) and mixtures of two linear aliphatic diamines were studied. The elastic modulus, fracture toughness, impact resistance, and glass transition temperature were determined for various cure schemes. The morphologies of the cured resins were characterized with small angle X-ray scattering. The results show that samples with the same average morphology (molecular network structure) have similar elastic moduli and glass transition temperatures. If some heterogeneity is introduced in the molecular network structure without changing the average structure, however, the experiments indicate that the toughness can be increased without significantly sacrificing other properties.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 93
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 841-847 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Viscoelastic properties of polypropylene melts filled with small (0.15 μm) and large (4.0 μm) CaCO3 particles have been measured. The effects of particle size, loading, and rheological history on the dispersion of particles have been investigated. The dispersion of particles was found to decisively influence the viscoelastic properties of these filled polymers. The systems filled with large particles exhibit a relatively stable viscoelastic behavior. The small particle-filled polymers with low loading are stable similarly to the large particle-filled system. For the system filled with 30 wt% small particles, there appears a “second plateau” in the storage modulus G′ curve in low frequency region and the height of the second plateau depends strongly on the rheological history. The results are interpreted in terms of the formation of an internal structure of particles. It was found that the internal structure of particles is broken up by a steady shear flow and the dispersion of particles is changed.
    Zusätzliches Material: 10 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 94
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 829-834 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Three copolymeric perfluoroethers with the structure CF3[(OCF2CF2)p(OCF2)q] OCF3, having different p/q ratios, have been fractionated. The fractions obtained have been characterized by Gel Permeation Chromatography and 19F-NMR. The viscosity η the specific volume v and the glass transition temperature, Tg have been measured by standard techniques for all the above samples as well as for some other perfluorinated polyethers.The temperature dependence of viscosity of the unfractionated samples is described by the W.L.F. equation. The values of fg (fractional free-volume at Tg) and of af (free-volume expansion coefficient) are independent of composition, for p/q ratios from 0.53 to 1.15. The critical molecular weight, Mc, is of the order of 8-9,000. From the molecular weight dependence of specific volume, the contribution to the molar volume of the in-chain CF2 group and the excess molar free volume of the chain ends have been determined. The limiting value of Tg for an infinite molecular weight polymer was found to depend linearly on the compositional ratio O/C and the extrapolated values for polytetrafluoroethylene and for the homopolymer (CF2O)n were found to be respectively 200 K and 120 K.
    Zusätzliches Material: 7 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 95
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1146-1150 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Divalent metal (I.e.) Ba(2+), Ca(2+i), Mg(2+), Mn(2+), Cd(2+), Zn(2+), Pb(2+), and Sn(2+) salts of monovalent organic acids (i.e. p-methoxycinnamic, cinnamic, p-methoxybenzoic, and 4-n-butoxybenzoic) were synthesized via the double decomposition reaction from aqueous solution. Optical microscopy and differential scanning calorimetry (DSC) analysis showed that this series of salts formed nematic liquid crystals. DSC thermograms were characterized by broad nematic-to-isotropic transitions indicative of biphasic regions in which the nematic and isotropic phases coexist. These liquid crystalline salts were polymeric when melted due to ionic crosslinking which took place through the coordination of the divalent metal ion. Except Sn (2+) and Pb(2+), all the liquid crystalline halato-polymers were spun into fibers.
    Zusätzliches Material: 2 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 96
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1158-1164 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The steady shear viscosity and dynamic moduli, at 180 and 200°C, of polystyrene composites, containing cross-linked monodisperse polystyrene beads varying in diameter from 0.2 to 0.8 μm, are independent of bead size and cross-link density, but increase with the volume fraction of beads. Steady shear viscosities exhibit power-law regions up to 40% concentration of beads, but no yield stress. Storage and loss moduli are initially linear with frequency, on double logarithmic plots, with limiting slopes of 1.3 and 0.9, respectively. Uncross-linked beads and beads cross-linked with 0.1% divinylbenzene are destroyed by thermomechanical dispersion in the melt.
    Zusätzliches Material: 10 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 97
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1140-1145 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Room temperature mechanical properties, such as flexural strength and impact resistance, of epoxies and graphite/epoxy composites go through a maximum as a function of epoxy conversion. For tetraglycidyl 4,4′-diaminodiphenylmethane (TGDDM)-4,4′-diamlnodiphenylsulfone (DDS) formulations, the recommended cure cycle prescribes a maximum temperature close to 177°C. The maximum extent of reaction that may be obtained at this temperature is determined from the vitrification curve. At this maximum conversion, balanced mechanical and physical properties are attained in the partially cured specimen. However, if the standard cycle is used to cure thick parts, the maximum temperature inside the sample increases beyond 177°C. This leads to a complete conversion in most of the part and a consequent impairment of resulting physical and mechanical properties. It is shown how numerical solutions of differential energy and mass balances may be used to propose alternative cure cycles such that the maximum conversion at every point remains bounded by the vitrification curve. An illustration for a particular thickness is provided.
    Zusätzliches Material: 9 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 98
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1165-1170 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Thermal lithography on poly(ethylene terephthalate) (PET) is carried out by inducing crystallization through selective exposure of amorphous films to Infrared radiation. The obtained images can be smaller than the wavelength of the CO2 laser light. This circumvention of the diffraction limit is accomplished by taking advantage of the non-linear temperature dependence of the crystallization rate. The optical marking process is reversible through simple melting of the crystalline images. The complementary process, selective melting of an initially crystalline film, can also be accomplished. The use as a heat sink of a mask which forms the image pattern is demonstrated.
    Zusätzliches Material: 5 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 99
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1182-1182 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 100
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Zusätzliches Material: 1 Tab.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
Schließen ⊗
Diese Webseite nutzt Cookies und das Analyse-Tool Matomo. Weitere Informationen finden Sie hier...