ALBERT

Description: Using the fault plane mechanisms of the shallow earthquakes occurring along the Hellenic arc and the extent of the intermediate seismic belt, we make a quantitative estimate of the relative motion occurring between the Hellenic arc and the adjacent sea floor. This estimate is then used to evaluate the deformation in the Aegean area and to reconstruct the pattern of motion over the Eastern Mediterranean region for the last 13 m.y. It is shown that this pattern is compatible with the neotectonic and seismicity studies in Aegea. We then discuss the dynamics of the area and propose that, since Serravallian-Tortonian time, Aegea has been spreading gravitationally in front of the southwestward advancing Turkey. The reasons for this gravitational spreading are discussed.

Description: Data gathered by recent “Islas Orcadas” cruises reveal the seafloor spreading pattern for a region south of the Agulhas/Falkland fracture zone system. The presence of a magnetic anomaly bight about the Agulhas Plateau indicates that the Agulhas Plateau may have developed at the site of a tectonic plate triple junction during the Late Cretaceous. A westward jump in the seafloor spreading center during the Late Maestrichtian (anomaly 34−31) reduced the offset across the Falkland/Agulhas fracture zone system and resulted in the formation of two conjugate aseismic ridges here described as the Meteor and Islas Orcadas Rises. The magnetic lineation pattern in the Agulhas Basin suggests that a tectonic plate (Malvinas Plate) existed during Campanian to Maestrichtian times. Relative rates of motion are calculated for Antarctica, South America, and Africa for the Late Cretaceous.

Description: This chapter discusses the carbon turnover, calcification, and growth in coral reefs. Carbon turnover within a total reef community is a function of two distinct, biochemically interacting cycles. The first is the metabolic cycle consisting of the photosynthetic fixation of CO2 and the release of CO2 by respiration and decomposition processes. Superimposed on this are the direct incorporation of organic compounds (dissolved or particulate; living or non-living) originating outside the reef systems (in the adjacent ocean waters), and the loss of organic compounds from the reef system into the out-flowing water. The second is the inorganic carbonate cycle involving the biological and non-biological precipitation and dissolution of carbonates. Superimposed on this is the loss of particulate carbonates in suspension in the out-flowing water. The main chemical component of a coral-reef system is calcium carbonate, which occurs either as high-Mg calcite, aragonite, or low-Mg calcite. The mean calcification values in various environments at One Tree Reef are presented in the chapter. These data may be converted to an implied vertical growth rate potential assuming that accrual is dominantly aragonite (density = 2.89 g cm–3) and that there is 50% porosity after normal compaction.

Description: The usually high concentrations of Zn, Pb, Cd, and Cu in the most recently accreted portions of ferromanganese nodules from the western Baltic Sea are thought to reflect increased metal input due to anthropogenic mobilization. If so, the point of increase represents a time horizon within the structure of the nodule. Similar trace metal distributions of radiometrically dated sediments from the same area suggest that the ferromanganese nodules have grown in thickness between 0.02 and 0.16 mm yr−1. From this growth rate anthropogenic Zn flux to the nodule surface was calculated to be 80 mg m−2 yr−1.

Description: Microbial decomposition of organic matter in recent sediments of the Landsort Deep—an anoxic basin of the central Baltic Sea—resulted in the formation of a characteristic assemblage of authigenic mineral precipitates of carbonates, sulfides. phosphates and amorphous silica, The dominant crystalline phases are a mixed Mn-carbonate [(Mn0.85Ca0.10Mg0.05)CO3]. Mn-sulfide [MnS] and Fecarbonate [FeCO3]. Amorphous Fe-sulfide [FeS]. Mn-phosphate [Mn3(PO4)2] and a mixed Fe-Ca-phosphate [(Fe0.86Ca0.14)3(PO4)2] were identified by their chemical compositions only. The variability in composition of these solid phases and their mode of occurrence as a co-existing assemblage constrains the conditions and solution composition from which they precipitated. Estimates of activities for dissolved Fe. Mn. PO4, CO3 and S in equilibrium with such an assemblage are close to those found in recent anoxic interstitial water-sediment systems. It is important to have detailed knowledge of the composition and stability conditions of these solid precipitates in order to refine stoichiometric models of interstitial nutrient regeneration in anoxic sediments.

Description: Goban Spur lies on the continental margin of northwest Europe, southwest of Ireland. It is a marginal plateau underlain by Hercynian granites and Palaeozoic sediments, which form large horsts, grabens and tilted fault blocks with a trend that is approximately parallel to the main Celtic/Armorican Shelf edge. The spur is thought to be a westward continuation of the buoyant Cornubian Ridge, and is bounded to the north and south by large fault lines which probably represent reactivation of Hercynian structural trends. The continental basement is further divided longitudinally into a low-lying outer zone (Intermediate Zone) and a high inner region (Goban Spur proper). The ocean/continent boundary is thought to lie at the outer edge of the Intermediate Zone, Sea-floor spreading anomalies immediately west of the Intermediate Zone suggest that the adjacent ocean crust was created prior to anomaly 33 (say at ca. 90 m.y. B.P.). The sedimentary sequence on Goban Spur can be subdivided into four layers which can be tentatively correlated with the stratigraphic succession on the Meriadzek Terrace (IPOD sites). Such a correlation suggests that the lowermost sediment layer (?Jurassic-Albian) represents a tectono-sedimentary rift infill, and that Layers 2–4 (Upper Cretaceous to Quaternary) were deposited during slow epeirogenic downwarping of the plateau and that the sedimentary processes involved both draping and strong current moulding. The relatively buoyant nature of Inner Goban Spur has inhibited the accumulation of a thick post-rifting sedimentary sequence (700–1000 m), and has shielded the Intermediate Zone from downslope mass movements of material. This has resulted in the accumulation of an anomalously thin post-rift stage outer margin sediment prism (ca. 1000 m) compared to most continent rises (up to 10 km).

Description: A bathymetric map of the deep-sea floor off southeastern Africa shows the Agulhas Plateau to be separated from the continental margin of southeastern Africa by a narrow (50 km) elongate depression, the Agulhas Passage, which acts as a deep-water connection between the Agulhas and Transkei basins. Three regionally developed sediment layers occur in the deep (〉 4500 m) Transkei Basin/Agulhas Passage area. With the aid of a simple ocean crust sinking/carbonate compensation level (CCL) model these layers are related to the sedimentation history of the area. The model suggests that acoustic basement (Horizon X) represents Lower Cretaceous limestones draped over oceanic basement, and that this is overlain by an acoustically transparent sequence of pelagic/terrigenous material (Horizon A) that was deposited during a lengthy period (95 m.y.) beneath the carbonate compensation level. Post-Late Miocene sedimentation (Horizons B and C) has probably taken place above the CCL. Local sedimentation has always been influenced by strong sea-floor currents, but since middle Palaeogene times these currents have operated on a regional scale and have generated numerous large ridge and billow-like bed forms.

Description: Many occurrences of mineral resources in ocean water, on the ocean floor and in its deeper parts have long been well-known. This is readily understandable, because numerous ancient mineral products which are exploited on land were originally formed in marine milieus as far back as the Precambrian , e.g., marine sedimentary iron ores, rock salt, potassium, phosphate and manganese , as well as petroleum and natural gas. This book deals with ores in sediments, and in sedimentary and volcanic rocks. According to the Concise Oxford Dictionary (Fowler and Fowler , 1964), ore is defined as "solid native mineral aggregate from which valuable constituents not necessarily metal may be usefully extracted". Therefore , in tllis chapter only mineral resources of inorganic origin in ocean water and on the ocean floor are discussed and not those of organic derivation, although the existence of petroleum, natural gas and, to some extent, of coal in the subsurface of the ocean shelves is of greater economic importance. The amount of oil and gas produced in 1969 represented more than 90% by value of all mineral resources obtained from the oceans and ocean floors. Ore deposits in bed-rock formations of the shelf region, such as those which are exploited near Cornwall (England) and Newfoundland for example, are also irrelevant, as these are merely extensions of discoveries on the nearby mainland. The purpose of this chapter is to give a general review of the (inorganic) mineral resources of the oceans and the ocean floors . In this respect, not only are the economically important products which are already in use discussed, but also those materials which, in their oceanic environment, can become of economic value in the near or more remote future. For a better understanding of the existence of such materials, some deposits have also had to be reviewed which will not become of economic value . Since some contributions in this book are specifically dedicated to Recent marine ferromanganese deposits and Recent phosphorite deposits, these mineral resources are only briefly discussed in tllis chapter. (For details on Recent marine and lacustrine manganese deposits see Chapters 7 and 8 by Glasby/Read and by Callender/Bowser, respectively, in Volume 7.) The litarature on the mineral (inorganic) resources of the oceans and ocean floors is extremely extensive, so that a choice had to be made and, therefore, the bibliography added to this chapter consists mainly of recent publications.

Description: Thick sediments (maximum of at least 4900 m) infill the Natal Valley, which lies between the coast of South Africa/Mozambique and the Mozambique Ridge. Eight physiographic provinces are recognised in the valley, and their boundaries can be related to well-defined sediment thickness or facies discontinuities within the basin infill. The acoustic stratigraphy of the area is established by reference to two regionally developed reflecting horizons, which, on the basis of previously published borehole and seismic data, are tentatively identified as mid-Cretaceous (McDuff) and mid-Cainozoic (Angus) hiatuses or important facies boundaries. Sedimentation began in the Natal Valley before mid-Cretaceous times and since then sediment dispersion has been strongly influenced by the disposition of large basement (? volcanic) highs: the approximately NE—SW Almirante Leite and Naudé ridges, and the larger N—S Mozambique Ridge. There is abundant evidence that sedimentation in the vicinity of these ridges has been current-controlled since at least mid-Cainozoic (Angus) times. The two main terrigenous sediment input points have been the Tugela and Limpopo rivers, which have large sediment cones adjacent to their mouths.

Description: Food production is affected by climate and by climate change. The indices for climate change may be recognized in long-term systematic observations of oceanic water columns at selected referential sites. The Mediterranean Sea, as part of the global oceanic circulation system, may be sensitive to climatic variation and may have an influence upon climate. The establishment of international referencestations for the Mediterranean area is suggested.

Description: Petrographic examination of amygdules and veins associated with moderately altered pillow basalts dredged from the Peru Trench has revealed that a consistent pattern of mineral crystallization has occurred. This sequence is: (1) green, weakly pleochroic clay (R.I. 〉 1.56); (2) dark yellowish brown, non-pleochroic clay (R.I. 〉 1.56); (3) light yellowish brown to colorless, fibrous, weakly pleochroic clay (R.I. 〈 1.56); and (4) calcite or celadonite. Chemical and X-ray diffraction analyses suggest that all clay mineral amygdule and vein fillings are dominated by intimate mixtures of an Fe-rich saponite and nontronite with very small admixtures of serpentine and illite. It is argued that sequential mineral fillings of fractures and vesicles may provide significant information about the chemistry of circulating interstitial fluids. For the pillow basalts studied the first-formed clays were enriched in nontronite, thereby suggesting Fe-rich fluids. These in turn were followed by saponite-rich clays and calcite. The change from Fe-and Mg-rich fluids to dominantly Ca-rich fluids is thought to correspond to a change from mafic mineral alteration to plagioclase alteration in the pillow basalts. An increase in the Fe3+/Fe2+ ratio of clays toward the centers of vesicles may indicate a change toward a more oxidizing environment of alteration.

Description: Five separate exposures of oceanic basalts were dredged in the vicinity of the Peru-Chile Trench between 9° and 27°S latitude. Each dredge is dominated by abundant pillow basalts. Approximately ten of the most unaltered, glassy and fine-grained samples were selected for detailed chemical and petrographic analyses from each dredge area. All basalts recovered in the Peru-Chile Trench are olivine and quartz-normative tholeiites that are believed to have formed at the now extinct Galapagos Rise 30–50 m.y. ago. Detailed chemical analyses of the basalts, including major and selected trace and rare earth elements, indicate that considerable compositional variability exists both within each of the dredged areas as well as between areas. Most of the inherent chemical variability observed within particular basement sections appears consistent with the concept of temporal evolution of magma bodies at a former spreading center by shallow-level fractional crystallization involving primarily plagioclase and olivine. In contrast, important chemical differences between the dredged areas suggest compositional heterogeneities in the mantle source regions. Our results indicate that although shallow-level fractionation has brought about large changes in composition of basalts in each area, compositional trends are distinct and appear to reflect original mantle-derived compositional differences.

Description: Thirty-four ash layers of Pleistocene and Pliocene age from DSDP Site 192, northwestern Pacific Ocean, have been subjected to detailed chemical and optical study to evaluate: (1) the chemical and optical variability in glass shards from deep-sea ash layers, and (2) secondary changes brought about by prolonged exposure to seawater. Glass shards from approximately half of the ash layers studied were found to have uniform compositions which approach the precision of the microprobe chemical analyses, whereas the remainder are compositionally diverse (e.g., SiO2, variations of 5–15% among shards from the same ash layer) and appear to be the eruptive products of compositionally zoned magma chambers. Optical studies of glass shards confirm the absence of devitrification or the formation of pervasive secondary alteration products. By contrast, chemical studies suggest that the glass shards have experienced progressive hydration with possible minor ion exchange of K, Mg, Ca and Si. The hydration occurs rapidly and leads to a rather uniform water content of 4.5–5% after several hundred thousands of years exposure to seawater. Step-wise heating dehydration experiments, optical effects, and published'oxygen isotope studies indicate that the water of hydration is incorporated uniformly within the glass. Systematic chemical differences between electron microprobe analyses of glass shard interiors and corresponding bulk chemical study by atomic absorption lead us to postulate that glass shard margins have undergone a minor chemical exchange with major cations in seawater. They have gained 0.10–0.20 wt. % K20, MgO, and CaO while losing a corresponding amount of Si2O. Although the glass shards from DSDP Site 192 are hydrated and may have experienced subtle, surficial ion exchange, we stress that they are the most chemically representative samples available of magmas that were explosively erupted from volcanic arcs.

Description: A complete set of linearly independent relationships among the different cross spectral components obtained from pairs of moored instruments is derived which can be utilized to test whether or not the observed fluctuations within the internal wave frequency band represent a field of propagating internal waves. A further complete set of relationships is derived which enables to test whether or not the internal wave field is horizontally isotropic and (or) vertically symmetric. These relations are compared with corresponding relations for alternative models (standing internal wave modes, three-dimensional isotropic turbulence) and their capability to discriminate between the various models is investigated. The tests are applied to a set of data for which it is found that the observed fluctuations are consistent with both propagating and standing internal waves whereas isotropic turbulence must be rejected for the most part of the internal wave frequency band.

Description: Several types of abyssal bedforms have been discovered during surveys with a deeply towed instrument package at water depths of 1.5–6 km in the Pacific and Atlantic Oceans. Cores and current-meter records obtained at the same sites provide data for interpreting their dynamics. Wave and current ripples are best portrayed in bottom photographs, but medium-scale bedforms, including sand waves, mud waves and erosional furrows, are described by interpreting high-resolution side-looking sonar records. The largest examples affect surface-ship echograms, though their shape and structure can seldom be resolved without near-bottom observations. Wave ripples are common on the slopes of seamounts and ridges, while current ripples and sand waves occur beneath some fast thermohaline currents whose beds are shallower than the foraminiferal compensation depth. Depositional and erosional bedforms in cohesive sediment have been found beneath the deepest thermohaline currents; they may be restricted to areas where the flow is unusually steady in direction.

Description: Highlights • Coupled geomicrobiology and geomechanics to investigate alterations in shales. • Microbial process can alter the mechanics, mineralogy, and microstructure of shales. • Biogeomechanical alterations reduced permeability by 93% and porosity by 38%. • Microfractures in shales can be sealed during biogeomechanical alterations. • Biogeomechanical alterations can enhance CO2 storage security and caprock integrity. Shales have been a major focus of the energy industry over the past few decades. Recently, there is a paradigm shift in the energy industry to low-carbon solutions, such as carbon capture and storage (CCS), to mitigate global warming caused by carbon footprint. The problem of long-term safe and efficient geological CO2 storage (GCS) and caprock integrity are some of the major challenges impeding large-scale CCS application. Here, we investigated how localized and bulk biogeomechanical alterations could potentially impact caprock integrity and CO2 storage in depleted shale reservoirs. We cultivated the shale core samples (containing both artificial-induced and pre-existing natural fractures) with a cultured microbial solution at specific temperature, time, and growth conditions. Subsequently, we obtain the properties of the fractured shale rock samples impacted by this microbial process. We investigate the impact of the mechanical responses due to the microbial process, on the long-term integrity and storage potentials of CO2 in shale reservoirs. Our results suggest that in Eagle Ford, Marcellus, and Niobrara shale formations, microbially-altered local and bulk mechanical properties can enhance the long-term caprock integrity and CO2 storage security by: (1.) Increasing the localized (+19% unconfined compressive strength, −20% Poisson’s ratio, +35% fracture toughness) and bulk (+50% unconfined compressive strength, −13% Poisson’s ratio) mechanical integrity; (2.) Decreasing permeability (−93%) and porosity (−38%); (3.) Altering the clay mineral content (−56%), calcite content (+21%), and morphology; (4.) Occluding microfractures; and (5.) Mitigating any potential leakage to the atmosphere through the caprock. This study considers the heterogeneity of shales, and provide valuable insights and viable assessment in solving the long-term GCS application in depleted hydrocarbon reservoirs.

Description: Highlights • Internal diffusion often controls the releases of flame retardants from microplastics. • Fick's law can describe the releases of additive flame retardants from microplastics. • Effects of temperature, plastic matrix, and particle size can be predicted by models. • Weathering of plastic matrix can greatly accelerate the releases of flame retardants. • Low fluxes of flame retardants released from microplastics pose no risk to ecosystem. The widely occurring debris of plastic materials, particularly microplastics, can be an important source of flame retardants, which are one of the main groups of chemicals added in the production of plastics from polymers. This review provides an overview on the use of flame retardants in plastic manufacturing, the kinetics of their releases from microplastics, the factors affecting their releases, and the potential environmental and ecosystem risk of the released flame retardants. The releases of flame retardants from microplastics typically involve three major steps: internal diffusion, mass transfer across the plastic-medium boundary layer, and diffusion in the environmental medium, while the overall mass transfer rate is commonly controlled by diffusion within the plastic matrix. The overall release rates of additive flame retardants from microplastics, which are dependent on the particle's geometry, can often be described by the Fick's Law. The physicochemical properties of flame retardant and plastic matrix, and ambient temperature all affect the release rate, which can be predicted with empirical and semi-empirical models. Weathering of microplastics, which reduces their particle sizes and likely disrupts their polymeric structures, can greatly accelerate the releases of flame retardants. Flame retardants could also be released directly from the microplastics ingested by aquatic organisms and seabirds, with physical and chemical digestion in the bodies significantly enhancing their release rates. Limited by the extremely slow diffusion in plastic matrices, the fluxes of flame retardants released from microplastics are very low, and are unlikely to pose significant risk to the ecosystem in general. More research is needed to characterize the mechanical, chemical, and biological processes that degrade microplastics and accelerate the releases of flame retardants and to model their release kinetics from microplastics, while efforts should also be made to develop environmentally benign flame retardants to ultimately minimize their risk to the environment and ecosystem.

Description: The ubiquitous use of microplastics and their release into the environment especially the water bodies by anthropogenic/industrial activities are the major resources for microplastic contamination. The widespread and often injudicious use of antimicrobial drugs or antibiotics in various sectors including human health and hygiene, agriculture, animal husbandry and food industries are leading to the release of antibiotics into the wastewater/sewage and other water bodies, particularly in urban setups and thus leads to the antimicrobial resistance (AMR) in the microbes. Microplastics are emerging as the hubs as well as effective carriers of these microbial pathogens beside their AMR-genes (ARGs) in marine, freshwater, sewage/wastewater, and urban river ecosystems. These drug resistant bacteria interact with microplastics forming synthetic plastispheres, the ideal niche for biofilm formations which in turn facilitates the transfer of ARGs via horizontal gene transfer and further escalates the occurrence and levels of AMR. Microplastic-associated AMR is an emerging threat for human health and healthcare besides being a challenge for the research community for effective management/address of this menace. In this review, we encompass the increasing prevalence of microplastics in environment, emphasizing mainly on water environments, how they act as centers and vectors of microbial pathogens with their associated bacterial assemblage compositions and ultimately lead to AMR. It further discusses the mechanistic insights on how microplastics act as hosts of biofilms (creating the plastisphere). We have also presented the modern toolbox used for microplastic-biofilm analyses. A review on potential strategies for addressing microplastic-associated AMR is given with recent success stories, challenges and future prospects.

Description: In the present work, an untargeted metabolomic approach based on ultra-high-performance liquid chromatography coupled with high-resolution mass spectrometry (UHPLC–HRMS) was performed for the discrimination of 25 accessions of white quinoa from main production zones of Peru. From the fingerprint analysis, a total of eighty-four metabolites were tentatively identified based on their accurate mass measurements and MS/MS data. Among them, forty-six compounds are reported here for the first time in C. quinoa (eight phenolics, one ecdysteroid, and thirty-seven saponins), twenty-four of them would correspond to new structures. Principal component analysis (PCA) and orthogonal partial least square discriminant analysis (OPLS-DA) were used to analyze the metabolomic data. As a result, the samples were distributed into two groups. The compounds contributing to the differences between these groups were identified by S-plot analysis.

Description: Highlights • UAV-based thermal imaging allows precise mapping of diffusive thermal water discharge. • High tidal ranges affect fluid flow and promote larger thermal anomaly. • The La Jolla thermal anomaly is caused by a discharge of 330 ± 44 L s−1 of thermal water. • The La Jolla advective heat output (40.5 ± 5.2 MWt) can power a desalinization plant. The exploration of unexploited geothermal resources is required to encourage the use of renewable energy. This study focuses on La Jolla beach, Ensenada, Mexico. The beach hosts a thermal anomaly with temperatures of up to 52 °C at the surface and up to 93 °C at 20 cm depth. The objectives were to: map the thermal anomaly, understand the impact of tides, quantify the thermal water discharge rate and heat output, and discuss a direct use of the energy. The mapping was performed with Unmanned Aerial Vehicles equipped with optical and thermal cameras at two different dates. Additional temperature measurements were performed with a thermocouple, while the total fluid discharge was estimated from flow measurements. A comparison between the campaigns indicated that the highest surface temperature area was more than three times larger in 2019 than in 2018 (259 m2 vs. 69 m2). Such change was due to the tidal range and associated hydrostatic pressure variations. The total thermal water discharge is 330 ± 44 L s−1, which corresponds to an advective heat output of 40.5 ± 5.2 MWt. The use of this energy in a Multi-Effect Distillation desalinization plant can contribute to cover the shortage of freshwater in Ensenada.

Description: The Neolithic Revolution began approximately 10,000 years ago and is characterized by the ultimate, nearly complete transition from hunting and gathering to agricultural food production on land. The Neolithic Revolution is thought to have been catalyzed by a combination of local population pressure, cultural diffusion, property rights and climate change. We undertake a thought experiment that examines trends in these key hypothesized catalysts of the Neolithic Revolution and patterns of today to explore whether society could be on a path towards another paradigm shift in food production: away from hunting of wild fish towards a transition to mostly fish farming. We find similar environmental and cultural pressures have driven the rapid rise of aquaculture, during a period that has now been coined the Blue Revolution, providing impetus for such a transition in coming decades to centuries (as opposed to millennia). However, we also highlight the interacting and often mutually reinforcing impacts of 1) technological and scientific advancements, 2) environmental awareness and collective action and 3) globalization and trade influencing the trajectory and momentum of the Blue Revolution from patterns and processes of the Neolithic Revolution. We present two qualitative narratives that broadly fall within two future trajectories of seafood production: 1) a ubiquitous aquaculture transition and 2) commercial aquaculture and fisheries coexistence. Each narrative contains two sub-narratives based on differing management and regulatory strategies for aquaculture and fisheries. This scenarios approach aims to encourage logical, forward thinking, and innovative solutions to complex systems’ dynamics. Scenario-based thought experiments are useful to explore large scale questions, increase the accessibility to a wider readership, and ideally catalyze discussion around proactive governance mechanisms. We argue the future is not fixed and society now has greater foresight and capacity to choose the workable balance between fisheries and aquaculture that supports economic, environmental, cultural and social objectives through combined planning, policies, and management.

Description: The European Union cap-and-trade emissions trading system (EU ETS) faces two challenges in the context of the European Green Deal. First, to meet the Paris temperature target, emissions in the energy and industrial sectors must fall to net-zero and then even become net-negative. Second, there is a concern that excessive CO2 price spikes and volatility on this path will jeopardize the political acceptance and support for emissions trading as a climate policy instrument. Conditional supply of carbon removal credits (CRCs) to support dynamic carbon price caps would make it possible to stabilize the market in the transition from positive to net-negative emissions trading while keeping the net-emissions path unchanged. CRCs would be assigned for carbon removal achieved for example with methods like Direct Air Carbon Capture and Storage or Bioenergy with Carbon Capture and Storage and would be used by companies under the EU ETS to compensate for their emissions. However, we suggest that there would be no direct exchange between emitting companies under the EU ETS and carbon removal companies, i.e., the demand and supply side of CRCs, during an initial phase. Instead, we suggest assigning an institutional mandate to for example a carbon central bank (CCB) to organize the supply of CRCs. Under this mandate, carbon removal would be procured, would be translated into a corresponding number of CRCs, and a fraction of it could be auctioned to the market at a later point in time, provided that market prices exceed a certain (dynamic) price cap.

Description: Algae synthesise structurally complex glycans to build a protective barrier, the extracellular matrix. One function of matrix glycans is to slow down microorganisms that try to enzymatically enter living algae and degrade and convert their organic carbon back to carbon dioxide. We propose that matrix glycans lock up carbon in the ocean by controlling degradation of organic carbon by bacteria and other microbes not only while algae are alive, but also after death. Data revised in this review shows accumulation of algal glycans in the ocean underscoring the challenge bacteria and other microbes face to breach the glycan barrier with carbohydrate active enzymes. Briefly we also update on methods required to certify the uncertain magnitude and unknown molecular causes of glycan-controlled carbon sequestration in a changing ocean.

Description: The depth of the Labrador Sea mixed layer during winter convection is a balance between atmospheric buoyancy loss and lateral buoyancy exchange, and is notoriously difficult to represent accurately in ocean and climate models. This study shows that lateral exchanges of heat and salt between the shelf and the interior are smaller in a regional coupled ocean–sea ice model at higher vertical resolution (75 levels compared with 50 levels), due in part to altered bathymetry along the Greenland shelf. Reduced lateral exchange results in a stronger stratification in the interior of the Labrador Sea, with stronger convection resistance which results in unrealistically shallow mixed layers. The westward fluxes of heat and salt associated with Irminger Water at Cape Farewell are 50 % and 33 % lower, respectively, with higher vertical resolution. Exchanges south of the Labrador Sea from the North Atlantic Current are also smaller, contributing to a reduction in salt and heat import into the Labrador Sea interior. When the high resolution model is forced with a stronger wintertime buoyancy loss at the ocean surface, this weakens the Labrador Sea stratification, allowing the forcing to break through the freshwater cap and increasing convection, bringing mixed layer depths back to observed values. A strong atmospheric forcing can therefore compensate for a reduction in lateral advection. The mixed layer depths, which are representative of convection and Labrador Sea water formation, will be the focus in this study. Therefore, this study suggests that convection and Labrador Sea Water formation is a complex interplay of surface and lateral fluxes, linked to stratification thresholds.

Description: Ongoing discoveries of terrestrial exoplanets and the desire to determine their habitability have created an increasing demand for studies of a wide range of climatic regimes and atmospheric circulations. These studies have, in turn, challenged our understanding of our own planet’s atmospheric dynamics and provided new frameworks with which we can further our understanding of planetary atmospheres. In this work, we use an idealized moist general circulation model in aquaplanet configuration to study the atmospheric circulation of terrestrial planets with high obliquities. With seasonally varying insolation forcing and a shallow slab ocean as a lower boundary, we emphasize seasonal phenomena that might not be captured in simulations with annual mean forcing and that might involve nonlinear behaviors. By progressively increasing obliquity, we explore the response of the large-scale atmospheric circulation to more extreme seasonal cycles and a reversed annual mean equator-to-pole insolation distribution, and its impact on the energy and water cycles. We show that for high obliquities, the large-scale atmospheric circulation and the meridional energy transport are dominated by seasonally reversing broad cross-equatorial Hadley cells that transport energy from the summer to the winter hemisphere and significantly mitigate temperature extremes. These overturning cells also play a major role in shaping the planet’s hydrological cycle, with the associated ascending branches and precipitation convergence zones becoming progressively broader and more poleward shifted into the summer hemisphere with higher obliquities. While not embedded within the Hadley cell ascending branches, the hot summer poles of high obliquity planets experience nonnegligible precipitation during and at the end of the warm season: during the summer, lower-level moist static energy maxima at the summer poles force locally enhanced convective activity. As temperatures rapidly drop at the end of the summer and convective activity decreases, the water-holding capacity of the atmosphere decreases and water vapor stored in the atmospheric column rapidly condenses out, extending the duration of the summer pole rainy season into the corresponding autumn. Our study reveals novel understanding of how atmospheric dynamics might influence a planet’s overall climate and its variability.

Description: The analysis of three extreme African dust outbreaks over the Iberian Peninsula (IP) shows that a double Rossby wave breaking (RWB) process in the polar jet (PJ) creates the conditions for dust storm formation over subtropical deserts in North Africa and the restructuring of upper-level air flows critical for the dust transport poleward after ablation. Two consecutive anticyclonic RWBs initiate over the IP and the adjacent Atlantic, the first commencing 10 days before dust reaches the IP and the second three to five days later. The first RWB becomes quasi-stationary over the eastern Mediterranean when the second RWB develops. In turn, the first RWB blocks downstream propagation of the second, which is amplified by energy reflection poleward from the first break causing vortex intensification and equatorward propagation over the Atlas as well as a strengthening and coupling of the subtropical jet (STJ) to circulations in the ITCZ. Zonal flows are blocked and sustained low-level northeasterlies/easterlies are induced across northwest Africa. The three events present substantial differences in the location and geometry of key upper- and low-level subsynoptic features that organize the dust storms over the Sahara following the second break. Dust lifted by either the cold outflow from convective downdrafts or by orographic gravity waves interacts with terrain-induced and larger scale circulations and is transported to the IP. The location of the cyclonic large scale signal from the second RWB to the west or over the Atlas and the blocking of zonal flows are key for the poleward dust transport.

Description: Highlights • Coupled microbiology and geomechanics to investigate alterations in shales. • Microbial process can alter the near-wellbore of shale gas reservoirs. • Microbial alterations of near-wellbore rock properties can weaken mechanical integrity. • Biogeomechanical alterations increased porosity (+42%) & permeability (+6430%). • Biogeomechanical alteration with other stimulation methods can improve gas recovery. Shale gas reservoirs, with typically ultra-low permeabilities, have been a major focus of hydrocarbon production over the past few decades. In this paper, we investigated how biogeomechanical alteration of near-wellbore properties could potentially impact hydrocarbon recovery from low-permeability reservoirs, using Wolfcamp shale and Niobrara shale formations. We first obtained the geomechanical properties using the scratch test method, in addition to the mineralogical, microstructural, and porosity and permeability measurements of the shale gas samples. Subsequently, we treated the core samples with a cultured microbial solution at distinct conditions. Further, we obtained the corresponding new geomechanical properties, in addition to the new mineralogical, microstructural, and porosity measurements of the samples impacted by the process. Finally, we showed the implications of the altered near-wellbore properties for hydrocarbon recovery from shale gas reservoirs. Our results suggest that in shale gas reservoirs, microbial-induced alterations of near well-bore properties could temporally reduce its mechanical integrity (Wolfcamp shale = −21% unconfined compressive strength, −42% scratch toughness; Niobrara shale = −24% unconfined compressive strength, −14% scratch toughness), increase porosity (+43%) and permeability (+6430%), and impact the microstructural and mineralogical properties. The near-wellbore biogeomechanical alterations could potentially improve hydrocarbon recovery by enhancing: (1.) the susceptibility for induced fractures to nucleate and propagate during reservoir-stimulation; (2.) flow pathways to improve hydrocarbon recovery.

Description: Both chemical and isotopic compositions of volcanic plumes are highly useful in evaluating the present status of active volcanoes. Monitoring their temporal changes can facilitate the forecasts of volcanic activity as well. In the present study, we developed a drone-borne automatic sampler for volcanic plumes in which an output signal from a sulfur dioxide (SO2) sensor triggered a pump to collect samples when its SO2 concentration exceeded a predefined threshold. First, we tested the automatic sampler while holding the device by hand at Iwo-yama volcano, Kirishima volcanic complex, Japan, where the fumaroles were accessible. Second, we fitted the sampler on a drone at Nakadake central cone, Aso volcano, Japan, where only the crater rim was accessible. In both sampling campaigns, good consistency in isotope ratios (2H/1H) of molecular hydrogen (H2) between samples collected by the automatic sampler and those collected directly into pre-evacuated flasks was obtained. Furthermore, by using the drone-borne sampler at Aso volcano, we obtained plume samples with higher concentrations of H2 and carbon dioxide than those taken directly into flasks at the crater rim. Our sampler can be utilized to collect volcanic plume samples for the determination of stable isotopic compositions in general by subsequent laboratory analysis and the remote establishment of fumarole outlet temperature based on the 2H/1H ratios of hydrogen, including their temporal changes.

Description: Volcaniclastic stratigraphy can be difficult to map and describe due to its complex nature. However, such stratigraphy preserves information about fluctuations in volcanic activity and sedimentation and is vital to understanding volcanic systems. Uncrewed aerial vehicle (UAV) based analysis of volcanic stratigraphy can enhance mapping and analysis, especially on vertical surfaces where outcrop exposure is greatest. Here we present a method for using small UAVs to produce vertical grain size and bedding measurement logs, or quantitative stratigraphic columns, of vertical volcaniclastic stratigraphy. We demonstrate the range of high-accuracy measurements and parameters that can be collected for building measurement logs using consumer grade UAVs through a case study in the Marysvale volcanic field where we collected 34,422 grain measurements from 21 individual units. The purpose of producing such measurement logs is to enhance lithofacies analysis through the use of large quantitative datasets and improve the reproducibility of data reporting. Whereas descriptions of volcaniclastic units such as those describing grading are often reported qualitatively, we describe methods for calculating numerical parameters for enhanced lithologic analysis including grain size, grading, clast to matrix ratios, and shape characteristics. The methods described in this paper can enhance field data acquisition, mapping, and quantitative analysis of volcaniclastic deposits and are applicable to a wide range of other geologic settings where coarse-grained clastic sedimentary deposits exist.

Description: Mussel aquaculture is heavily reliant on wild mussel populations that supply juveniles (spat) for seeding farms. However, little is often known about parent populations, representing a risk for the sustainability of the industry. We used hydrodynamic back-tracking models to identify potential parental areas that provision green-lipped mussel (Perna canaliculus) spat across a range of settlement sites in New Zealand's largest aquaculture area. Median parental area varied considerably between 19 km2 for sites located in enclosed bays and a maximum of 〉1150 km2 for sites located in open bays. Median distance to parent populations ranged between 1.8 and 21.4 km, with a maximum larval dispersal estimated to be ca. 100 km. Small seasonal variations in parental area and dispersal distance were detected in some regions, whereas inter-annual variability was relatively minor. Regional connectivity between settlement and parental regions ranged between a minimum of 45% of larvae originating in the same parental region, to maximum retention rates of 99.9% for sites in enclosed bays, implying a considerable regional variation in the potential for self-seeding and exporting mussel larvae other areas. Our results also delineate areas that support spatfall by identifying likely locations for wild or farmed parental populations, and by establishing the spatial extent where mussel reproduction and larval development through to settlement take place. These dispersal and connectivity patterns are crucial to support management decisions for the conservation and restoration of parental populations, and other environmental constraints, such as water quality, which are necessary to ensure the sustainability of spat catching operations that enable shellfish farming.

Description: Aqueous sorption processes play an important role in, for example, pollutant binding to natural nanoparticles, colloid stability, separation and enrichment of components and remediation processes. In this article, which is a tribute to Hans Lyklema, models of localized (ad)sorption of molecules and ions from aqueous solution on homogeneous and heterogeneous nanoparticles are presented. The discussed models range from ideal monocomponent sorption on homogeneous (Langmuir) and heterogeneous sites, to multicomponent ideal sorption on homogeneous and heterogeneous sites, multicomponent multisite ion complexation with charge distribution (CD-MUSIC) and non-ideal competitive adsorption on heterogeneous sites (NICA). Attention is also paid to lateral interaction, site-induced aggregation, binding stoichiometry and multilayer formation. Electrical double layer models are discussed in relation to ion binding on impermeable and permeable nanoparticles. Insight in models that can describe sorption of molecules and ions on nanoparticles leads to awareness of the limitations of using simple models for complex systems and is needed for the selection and application of an appropriate model for a given system. This is relevant for all practical sorption processes and for a better understanding of the role of natural nanoparticles in the binding of nutrients and pollutants.

Description: These are the first animals to pass mutations found outside sex cells

Description: Varying culture methods are commonly used for eastern oyster, Crassostrea virginica, aquaculture in the Northeast United States. Vibrio vulnificus and V. parahaemolyticus, two human pathogenic bacteria species, accumulate in this edible, filter feeding shellfish. This study examined the use of two methods in an intertidal area (oysters cultured in trays and in bags on sediment) and two methods in a subtidal area (oysters cultured in trays and loose on the sediment) in Massachusetts over the growing season in 2015. Abundance of total V. vulnificus along with total and pathogenic (tdh+/trh+) V. parahaemolyticus were determined in oysters, sediment and water using real-time PCR. Temperature, salinity, turbidity and chlorophyll were continually measured every 15 min at each location. There were significantly higher abundances of total and pathogenic V. parahaemolyticus in on-bottom cultured oysters, while significantly higher abundances of V. vulnificus were identified in oysters from off-bottom culture in a subtidal location in Duxbury Bay, MA. In an intertidal location, Wellfleet Bay, MA, significantly higher abundances of total and tdh+ V. parahaemolyticus were found in off-bottom oysters, but significantly higher abundances of V. vulnificus and trh+ V. parahaemolyticus were found in on-bottom oysters. Spearman's correlation indicated that temperature is positively associated with concentrations of Vibrio spp. in oysters, water and sediment, but positive correlations between salinity and Vibrio spp. was also observed. Conversely, turbidity had a negative effect on Vibrio spp. concentrations in all sample types. There was no observed relationship inferred between chlorophyll and Vibrio spp. abundances in oysters, water or sediment.

Description: Highlights: • Temperature anomalies for the Mid-Holocene compared to preindustrial are significantly different in the low- and high-resolution versions of the atmospheric model ECHAM5 • For summer, shortwave cloud radiative forcing emerges as an important factor. • For boreal winter, differences are mainly related to circulation changes. • Anomaly differences are regionally as large as the mid-Holocene minus preindustrial temperature signals. Abstract: This study evaluates the dependence of simulated surface air temperatures on model resolution and orography for the mid-Holocene. Sensitivity experiments with the atmospheric general circulation model ECHAM5 are performed with low (∼3.75°, 19 vertical levels) and high (∼1.1°, 31 vertical levels) resolution. Results are compared to the respective preindustrial runs. It is found that the large-scale temperature anomalies for the mid-Holocene (compared to preindustrial) are significantly different in the low- and high-resolution versions. For boreal winter, differences are mainly related to circulation changes caused by the response to thermal forcing in conjunction with orographic resolution. For summer, shortwave cloud radiative forcing emerges as an important factor. The anomaly differences (low minus high resolution version) in the Northern Hemisphere are regionally as large as the anomalous mid-Holocene temperature signals. Furthermore, they depend on the applied surface boundary conditions. We conclude that the resolution matters for the Northern Hemisphere response in mid-Holocene simulations, which should be taken into account in model-model and data-model comparisons.

Description: Saccharina japonica is a commercially farmed seaweed of global importance. However, disease occurrence during different stages of cultivation can result in substantial economic losses. Identification of the causative agents of disease remains a significant bottleneck to the large scale cultivation of S. japonica. In this study, an aerobic heterotrophic, flagellated, rod-shaped Gram-negative bacterial strain X-8 was isolated from the bleaching diseased S. japonica sporelings. Pathogenecity of strain X-8 was tested by re-infection assay. The ultrastructural changes of infected S. japonica cells by strain X-8 indicated that chloroplasts were the first organelle responding to X-8 infection with deformed structure and later followed by fragmented nucleus. However, the ultra-structure of mitochondria and cell wall remained intact during the re-infection. Based on 16S rRNA gene sequence, morphological and biochemical characteristics, strain X-8 was designated as Pseudoalteromonas piscicida X-8. The pathogenicity of P. piscicida X-8 was identified by Koch's Postulate under laboratory conditions. Our results will not only help to establish a stable experimental model between the pathogenic bacteria and the host S. japonica to further elucidate the virulence mechanisms, but will also provide information for disease management to effectively prevent and mitigate the occurrence of bleaching disease of S. japonica at nursery stage.

Description: Highlights • UAV surveys can be used for evaluating long-term hillslope morphology evolution. • Successive landslides influence frequency distributions of topographic features. • Successive landslides gradually reduce slope gradient, roughness and local relief. • The slope gradient changes with elevation. Landslides are recognized as dominant geomorphic events of morphological evolution in most mountainous and hilly landscapes. However, the lack of multitemporal high-resolution topographic data has resulted in a lack of quantitative estimates of topographic changes influenced by successive landslides. Taking a typical hillslope with successive loess landslides in the Heifangtai loess tableland, China, as an example, we conducted four unmanned aerial system (UAS) surveys and created corresponding high-resolution digital elevation models (HRDEMs) and orthophotos. We found that multitemporal UAS surveys have become a powerful new approach for addressing local topographic changes and evolution over a relatively long time series. Moreover, landslides can leave persistent geomorphic imprints on hillslope topography. The frequency distributions of topographic indexes are significantly influenced by successive landslides. The mean slope gradient, roughness and local relief decreased with successive landslide occurrences, whereas the mean topographic wetness index (TWI) increased. However, the mean slope aspect was almost unchanged by successive landslides. Furthermore, analysis of the coefficient of variation demonstrates that the frequency distribution of the slope gradient becomes more dispersed with landslide occurrences, while the slope aspect and TWI become more concentrated. The slope gradient changes with elevation. More broadly, this study provides new insights into the prediction of the local topographic feature changes and morphology evolution trends caused by successive landslides.

Description: Highlights • Shale samples were exposed to slick water under the condition of 120 °C and 20 MPa within 30–90 days. • Microindentation was conducted to probe the distance-dependent, gradient alteration to shale mechanical properties. • The average rate of softening advancement was estimated as 0.13 mm/day. • The dissolution of carbonate minerals, pyrite oxidation and clay mineral osmotic swelling determine the shale softening. The shale softening behavior caused by hydrofracturing fluid is of great influence for the fracture conductivity and ultimate recovery of oil and gas from reservoir formations. This paper presents an experimental study on the characterization of a shale after being softened by the coupled thermo-hydro-mechanical-chemical (THMC) treatments that simulate the high-temperature and high-pressure rock-fluid interactions occurring in deep reservoirs during and after hydraulic fracturing. Microindentation tests were conducted to characterize the degradation degree and rate of mechanical properties of THMC-treated samples, and X-ray diffraction (XRD), scanning electron microscope (SEM), and micro-computed tomography (micro-CT) were carried out to analyze compositional and microstructural alterations of samples prior to and after THMC treatment. The results show that Young's modulus, hardness, and fracture toughness degrade significantly upon THMC treatment, and the average softening rate was estimated as 0.13 mm/day. The degradation of mechanical properties of the softened zones is primarily owing to the porous microstructure and crack propagation, resulting from the dissolution of carbonates, pyrite oxidation and the clay mineral osmotic swelling. These findings can provide a good insight of shale-fracturing fluid interactions, phenomenological behavior of shale softening that take place in deep reservoirs at elevated temperatures and pressures, and shed lights on the design, and operation of shale gas exploration.

Description: The recent and growing development and availability of unmanned aerial vehicles/systems (UAV, UAS, or “drones”) in volcanology has promoted a significant advance in volcanic surveillance of active volcanoes and in the characterization of volcanic landforms and hazards. However, in the tropics with heavy rainfall, deep volcanic soils and high relief, UAV surveying for volcanic geomorphology and volcanic hazards seems to be a relatively unexplored technique. Our aim is to present and promote innovative low-cost (〈$3000) UAV applications in volcanology to reduce costs and improve high-resolution quality (up to 8 cm/pixel) data acquisition in highly dynamic landscapes. Our results contribute to the state of the art of UAV applications in volcanic landforms in tropical developing countries where nearly half of the globally active volcanoes are located. Our findings prove that UAV's are a low-cost technique that can map large extensions of geomorphological features with accessibility limitations due to geological hazards and/or private property restrictions in short time. We surveyed four active volcanic sites in Costa Rica, Central America to illustrate potential applications of UAV mapping and geomorphological analysis of lava flows, debris avalanches, lahar deposits (debris flows) and biogeomorphic landscape changes due to forest succession. Analysis derived from the digital imagery captured by the UAV allowed to determine accurate volume calculations, surface roughness characteristics, morphometric quantifications, supervised surface classifications, and in combination with hydraulic modelling to assess hazards in urban planning. We discuss the utility, limitations, and future directions of low-cost UAV surveying in the geomorphological and geological analysis of tropical volcanic landforms and processes.

Description: Mount Agung (the highest volcano in Bali, Indonesia) began to erupt on November 21, 2017, after having been dormant for 53 years. More than 100,000 people were evacuated within the hazard zone between September 2017 (when the highest volcanic alert was issued) and early 2018. The eruptions continued until June 2019, accompanied by at least 110 explosions. During the eruptive crisis, the observation of the lava dome's emplacement was essential for mitigating the potential hazard. Details of the lava dome growth, including the volumetric changes and effusion rates, provide valuable information about potential eruption scenarios and lahar depositions. In this paper, the essential role of multi-temporal unmanned aerial vehicle (UAV) images in the monitoring of Mt. Agung's lava dome, and in determining the areas of potential lahar hazards during the crisis between 2017 and 2019 is described. A fixed-wing UAV was launched outside the hazard zone to photograph the lava dome on five occasions. Image enhancement, machine learning, and photogrammetry were combined to improve image quality, remove point clouds outliers, and generate digital terrain models (DTMs) and orthoimages. The analysis of the obtained DTMs and orthoimages resulted in qualitative and quantitative data highlighting the changes inside the crater and on the surrounding slopes. These results reveal that, from November 25 to December 16, 2017, the lava dome grew vertically by 126 m and reached a volume of 26.86 ± 0.64 × 106 m3. In addition, its surface experienced a maximal uplift of approximately 52 m until July 2019 with the emergence of a new dome with a volume estimated at 9.52 ± 0.086 × 106 m3. The difference between the DTMs of 2017 and 2019 reveals the total volume of erupted material (886,100 ± 8000 m3) that was deposited on the surrounding slopes. According to the lahar inundation simulation, the deposited material may cause dangerous lahars in 21 drainages, which extend in the north (N), north-east (N-E), south (S), south-east (S-E), and south-west (S-W) sectors of the volcano. This paper presents the use of UAV remote sensing for the production of high-spatial resolution DTMs, which can be used to both observe the emplacement of a lava dome, and to identify areas with potential lahar risk during a volcano crisis.

Description: Highlights • A new approach using UAS to map and classify volcanic deposits is described. • Tephra and lava are distinguished by their roughness and solar heating rate. • Solar heating rate decreases as lava transitions from pāhoehoe to ʻaʻā. • We compare manual and machine learning classification methods. The deposits from volcanic eruptions represent the record of activity at a volcano. Identification, classification, and interpretation of these deposits are crucial to the understanding of volcanic processes and assessing hazards. However, deposits often cover large areas and can be difficult or dangerous to access, making field mapping hazardous and time-consuming. Remote sensing techniques are often used to map and identify the deposits of volcanic eruptions, though these techniques present their own trade-offs in terms of image resolution, wavelength, and observation frequency. Here, we present a new approach for mapping and classifying volcanic deposits using a multi-sensor unoccupied aerial system (UAS) and demonstrate its application on lava and tephra deposits associated with the 2018 eruption of Sierra Negra volcano (Galápagos Archipelago, Ecuador). We surveyed the study area and collected visible and thermal infrared (TIR) images. We used structure-from-motion photogrammetry to create a digital elevation model (DEM) from the visual images and calculated the solar heating rate of the surface from temperature maps based on the TIR images. We find that the solar heating rate is highest for tephra deposits and lowest for ʻaʻā lava, with pāhoehoe lava having intermediate values. This is consistent with the solar heating rate correlating to the density and particle size of the surface. The solar heating rate for the lava flow also decreases with increasing distance from the vent, consistent with an increase in density as the lava degasses. We combined the surface roughness (calculated from the DEM) and the solar heating rate of the surface to remotely classify tephra deposits and different lava morphologies. We applied both supervised and unsupervised machine learning algorithms. A supervised classification method can replicate the manual classification while the unsupervised method can identify major surface units with no ground truth information. These methods allow for remote mapping and classification at high spatial resolution (〈 1 m) of a variety of volcanic deposits, with potential for application to deposits from other processes (e.g., fluvial, glacial) and deposits on other planetary bodies.

Description: How do people’s perceptions about when they work affect their intrinsic motivation? We find that working during non-standard work time (weekends/holidays) versus standard work time (Monday-Friday, 9-to-5) undermines people’s intrinsic motivation for their professional and academic pursuits. Working during non-standard work time decreases intrinsic motivation by causing people to consider better uses of their time. That is, people generate more upward counterfactual thoughts, which mediates the effect of work time on reduced intrinsic motivation. As a causal test of this process, increasing consideration of upward counterfactuals during standard work time reduces intrinsic motivation, whereas decreasing consideration of upward counterfactuals during non-standard work time helps employees and students maintain intrinsic motivation for their professional and academic pursuits. Overall, we identify a novel determinant of intrinsic motivation and address a real challenge many people face: How changing work schedules affect interest and enjoyment of work, with important consequences for work outcomes.

Description: Seagrasses are complex benthic coastal ecosystems that play a crucial role in organic matter cycling and carbon sequestration. However, little is known about how seagrasses influence the structure and carbon utilization potential of benthic bacterial communities. This study examined the bacterial communities in monospecific and mixed meadows of seagrasses and compared with bulk (unvegetated) sediments from Chilika, a brackish water coastal lagoon of India. High-throughput sequencing of 16S rRNA genes revealed a vegetation effect in terms of differences in benthic bacterial community diversity, composition, and abundances in comparison with bulk sediments. Desulfobacterales, Chromatiales, Enterobacteriales, Clostridiales, Vibrionales, and Acidimicrobiales were major taxa that contributed to differences between seagrass and bulk sediments. Seagrasses supported ∼5.94 fold higher bacterial abundances than the bulk due to rich organic carbon stock in their sediments. Co-occurrence network demonstrated much stronger potential interactions and connectedness in seagrass bacterial communities compared to bulk. Chromatiales and Acidimicrobiales were identified as the top two keystone taxa in seagrass bacterial communities, whereas, Dehalococcoidales and Rhizobiales were in bulk communities. Seagrasses and local environmental factors, namely, water depth, water pH, sediment salinity, redox potential, total organic carbon, available nitrogen, sediment texture, sediment pH, and sediment core depth were the major drivers of benthic bacterial community composition. Carbon metabolic profiling revealed that heterotrophic bacteria in seagrass sediments were much more metabolically diverse and active than bulk. The utilization of carbon substrate guilds, namely, amino acids, amines, carboxylic acids, carbohydrates, polymers, and phenolic compounds was enhanced in seagrass sediments. Metabolic mapping predicted higher prevalence of sulfate-reducer and N2 fixation metabolic functions in seagrass sediments. Overall, this study showed that seagrasses control benthic bacterial community composition and diversity, enhance heterotrophic carbon substrate utilization, and play crucial roles in organic matter cycling including degradation of hydrocarbon and xenobiotics in coastal sediments.

Description: The total cultivable microbiota of the ice-stored European sea bass (Dicentrarchus labrax), the most important commercial fish species of the Mediterranean aquaculture, was determined using 16S rRNA gene sequence analysis. High Resolution Melting (HRM) curve profiles and sequencing analysis (V3–V4 region of the 16S rRNA gene) were used respectively for the differentiation and identification of the collected isolates from six time intervals (day 0, 4, 8, 12, 14 and 16) while fish were stored in ice. HRM analysis differentiated the unknown microbiota in ten groups (208 isolates) and in two single isolates based on their HRM curve profiles. The isolates with HRM profiles which were 〉91% similar within each group were found to belong to the same species using sequencing analysis. Thus, the ten groups consist of representatives of Psychrobacter glacincola, Ps. alimentarius, Ps. cryohalolentis, Ps. maritimus, Ps. fozii, Pseudomonas sp., Paeniglutamicibacter sp., Carnobacterium sp., Leucobacter aridicolis and Bacillus thuringiensis. Based on this approach, Ps. cryohalolentis was found to be the most dominant phylotype at the beginning of fish shelf-life compared to other species. The abundance of this bacterium decreased throughout storage, while Ps. glacincola increased and dominated at the time of the sensory minimum acceptability (day 14) and rejection (day 16). To conclude, HRM could be used for the rapid determination of sea bass microbiota, using the representatives of each group as reference bacterial strains, in order for scientists to solve rapidly stakeholders problems related with microbial quality or safety of fish.

Description: Ringed seals (Pusa hispida) are slowly recovering in the eastern and northern parts of the Baltic Sea after years of hunting pressure and contaminant exposure. Still, consequences of anthropogenic activities such as contaminant exposure and increasing temperatures are stressors that continue to have deleterious effects on their habitat and health. Transcription profiles of seven health-related genes involved in xenobiotic metabolism, endocrine disruption and stress were evaluated in blood, blubber, and liver of Baltic ringed seals in a multi-tissue approach. Selected persistent organic pollutants and total mercury concentrations were measured in blubber and liver, and muscle and liver of these animals, respectively. Concentrations of contaminants varied across tissues on a lipid weight basis but not with sex. mRNA transcript levels for all seven target genes did not vary between sexes or age classes. Transcript levels of thyroid hormone receptor alpha (TRα), retinoic acid receptor alpha (RARα) and heat shock protein 70 (HSP70) correlated with levels of persistent organic pollutants. TRα transcript levels also correlated positively with mercury concentrations in the liver. Of the three tissues assessed in this multi-tissue approach, blubber showed highest transcription levels of aryl hydrocarbon receptor nuclear translocator (ARNT), thyroid stimulating hormone receptor beta (TSHβ), oestrogen receptor alpha (ESR1) and peroxisome proliferator activated receptor alpha (PPARα). The wide range of genes expressed highlights the value of minimally invasive sampling (e.g. biopsies) for assessing health endpoints in free-ranging marine wildlife and the importance of identifying optimal matrices for targeted gene expression studies. This gene transcript profile study has provided baseline information on transcript levels of biomarkers for early on-set health effects in ringed seals and will be a useful guide to assess the impacts of environmental change in Baltic pinnipeds for conservation and management.

Description: Highlights • Our data split method handles spatial autocorrelation and imposes prediction fairness. • The sets impose fair algorithms with similar difficulty in all machine learning steps. • Kriging variance is a surrogate of spatial prediction difficulty. • The resulting training and test sets are compatible with any machine learning model. Machine learning supports prediction and inference in multivariate and complex datasets where observations are spatially related to one another. Frequently, these datasets depict spatial autocorrelation that violates the assumption of identically and independently distributed data. Overlooking this correlation result in over-optimistic models that fail to account for the geographical configuration of data. Furthermore, although different data split methods account for spatial autocorrelation, these methods are inflexible, and the parameter training and hyperparameter tuning of the machine learning model is set with a different prediction difficulty than the planned real-world use of the model. In other words, it is an unfair training-testing process. We present a novel method that considers spatial autocorrelation and planned real-world use of the spatial prediction model to design a fair train-test split. Demonstrations include two examples of the planned real-world use of the model using a realistic multivariate synthetic dataset and the analysis of 148 wells from an undisclosed Equinor play. First, the workflow applies the semivariogram model of the target to compute the simple kriging variance as a proxy of spatial estimation difficulty based on the spatial data configuration. Second, the workflow employs a modified rejection sampling to generate a test set with similar prediction difficulty as the planned real-world use of the model. Third, we compare 100 test sets' realizations to the model's planned real-world use, using probability distributions and two divergence metrics: the Jensen-Shannon distance and the mean squared error. The analysis ranks the spatial fair train-test split method as the only one to replicate the difficulty (i.e., kriging variance) compared to the validation set approach and spatial cross-validation. Moreover, the proposed method outperforms the validation set approach, yielding a minor mean percentage error when predicting a target feature in an undisclosed Equinor play using a random forest model. The resulting outputs are training and test sets ready for model fit and assessment with any machine learning algorithm. Thus, the proposed workflow offers spatial aware sets ready for predictive machine learning problems with similar estimation difficulty as the planned real-world use of the model and compatible with any spatial data analysis task.

Description: Deep-sea polymetallic nodule mining is expected to start within the next decade. There is currently a pressing need to develop best practices to minimise the potential environmental impacts of this new industry. Project-specific environmental management processes, such as environmental impact assessment (EIA), and the associated environmental management and monitoring plan (EMMP), must be effective to sufficiently mitigate environmental impacts of deep-sea mining (DSM) projects. This paper identifies the key drivers, barriers, and enablers to polymetallic nodule mining from a review of recent literature and develops an environmental management framework prior to any exploitation licenses being approved. We explore how the drivers to polymetallic nodule mining are framed in a global context, including claims that it will facilitate clean energy transitions, increase mineral supply diversity, and improve life cycle sustainability. We highlight the key barriers to effective environmental management, including epistemic uncertainty about deep-sea ecosystems, assessment of harmful effects from mining activities, and stakeholder support for a social license. We identify three enablers, including the precautionary approach, the ecosystem approach, and adaptive management, all of which are highly interdependent and must be operationalised to address the identified barriers. The results of this analysis indicate a complex social-ecological narrative infused throughout recent literature, emphasising the need for systems-level thinking and broader stakeholder participation. We present an environmental management framework designed to support good industry practice and guide future research.

Description: Northern peatlands store 300–600 Pg C, of which approximately half are underlain by permafrost. Climate warming and, in some regions, soil drying from enhanced evaporation are progressively threatening this large carbon stock. Here, we assess future CO2 and CH4 fluxes from northern peatlands using five land surface models that explicitly include representation of peatland processes. Under Representative Concentration Pathways (RCP) 2.6, northern peatlands are projected to remain a net sink of CO2 and climate neutral for the next three centuries. A shift to a net CO2 source and a substantial increase in CH4 emissions are projected under RCP8.5, which could exacerbate global warming by 0.21°C (range, 0.09–0.49°C) by the year 2300. The true warming impact of peatlands might be higher owing to processes not simulated by the models and direct anthropogenic disturbance. Our study highlights the importance of understanding how future warming might trigger high carbon losses from northern peatlands.

Description: Increased water temperature is considered an important cause of the loss of seagrass beds. This paper quantified the interactive influence of different combinations of water temperature and duration on the responses of Zostera marina plants in terms of survivorship, morphology, growth and physiology. The LT50 (lethal temperature that caused an increase in mortality to 50% of that of the control) and ET50 (effect time that caused a decrease in growth to 50% of that of the control) were calculated to reveal the quantitative relationship between temperature and duration that resulted in limiting effects on the survival and growth of Z. marina plants. Z. marina plants were exposed to different combinations of water temperature [23 (control), 25, 27, 29, and 31 °C] and duration (5, 10, 15 and 20 days), and then the plants were transferred to the control condition for over 30 days under laboratory conditions. The results showed that the survival rate of plants at the end of recovery were significantly lower than those of plants at the end of direct impact under the temperature levels of 29 and 31 °C in each duration, indicating that short-term periods of obviously increased water temperature would lead to long-term effects on the survival of Z. marina plants. Regression analysis revealed that the relationship between water temperature and duration that resulted in limiting effects on the survival and growth of Z. marina could be described as a strong power function. Pearson correlation analysis showed that the survival and growth of Z. marina plants exposed to different temperature levels were significantly correlated with leaf soluble sugar contents. This study will further develop our understanding of the degradation and disappearance of seagrass beds induced by increased temperature.

Description: Highlights: • Wind-PV power mix beneficial for balancing variability due to weather. • Ratio of 45–57% for PV over PV plus wind power maximises balancing effects. • Simultaneous extremes in wind and PV power occur on less than 10% of the days. Abstract: The increasing use of wind and solar power requires interventions to balance the associated variability in energy production. One option to reduce the costly interventions is to exploit the natural de-correlation of wind and irradiance. This study characterises the balancing potential of the natual variability in wind and photovoltaic energy production within and across eleven European countries. We use 20 years of highly resolved meteorological data from a post-processed regional reanalysis with a 6 km horizontal grid to calculate daily photovoltaic and wind power. Our results suggest a country-dependent reduction of the day-to-day variability in energy production by 29%–42% due to installing both PV and wind power capacities, compared to wind power only. The optimized photovoltaic to photovoltaic plus wind power generation ratios are 45–57% for maximizing balancing effects associated with the changing weather. We further identify on less than 10% of the days a simultaneous occurrence of extremes in photovoltaic and wind power across European countries. The cross-border balancing potentials for the extremes in renewable energy production are therefore high due to the spatio-temporal differences of the local weather.

Description: Highlights • Shear strength in the BPT is estimated based on tensorial strain partitioning. • Accounting for full strain components resolves problems in the two-mechanism model. • Inclination of slip planes causes weakening relative to the friction law. • Fault-parallel compression is significant in the BPT and brittle regimes. A constitutive law of shear zones in the brittle-plastic transition (BPT) is of great importance to understanding loading at the bottom of the seismogenic layer preceding large earthquakes. Previous microphysics-based models are based on the partitioning of slip and dilation normal to the shear zone into different deformation mechanisms. Here, I account for the remaining 2-D strain component, inelastic extension of the shear zone, and associated stress buildup parallel to the shear zone, and investigate the steady-state behavior of a shear zone in which slip on inclined planes and bulk plastic flow coexist. Kinematic constraints and constitutive laws of the two mechanisms were solved numerically. The results show that the inclination of slip planes causes weakening relative to the friction law. Whereas the previous two-mechanism model yields a larger strength than the friction law for a rate-weakening slip element in the BPT, the present model qualitatively resolves this problem. Fault-parallel compression buildup can exceed the normal stress in the BPT and the brittle regime if the friction coefficient of the slip planes is in the range of Byerlee's law. This study illuminates the importance of fault-parallel compression in understanding the fabrics and strengths of shear zones.

Description: Degassing volcanic systems, expressed by fumaroles, thermal anomalies, and hydrothermal alteration and deposition at the surface provide insights into the underlying structural architecture and the magmatic system. While the fumarole sites are easily identified and investigated, areas of diffuse degassing and associated hydrothermal alteration are barely explored. Here we investigate high-resolution optical and thermal infrared (TIR) data, acquired by unoccupied aircraft systems (UAS) at the La Fossa cone (Vulcano Island) in November 2018. The data provides insights into the structural complexity of degassing sites and associated processes at the surface. Applying the Structure from Motion (SfM) approach, we generate a photomosaic database with a 0.05 m and 0.7 m pixel resolution for the optical and infrared datasets, respectively. A Principal Component Analysis (PCA) was applied to the optical data to detect, define and extract areas of hydrothermal alteration and sulfuric deposition on a pixel base, with a feature detection threshold of up to 25 cm2. By comparing optical data, PCA results and the IR data, we found a broad alteration zone dominated by diffuse degassing surrounding the main fumaroles, which with ~ 60,000 m2 is ten times larger than the area covered by fumaroles and yellowish sulfuric deposits. Spectral and thermal characteristics of this alteration zone suggest a segmentation into at least 13 distinct subregions. Hydrothermal alteration and deposition were analyzed considering their pixel density and spectral signature (RGB) and show the highest pixel density in the center of the fumarole field, accompanied by a systematic color shift. The same region is characterized by a systematic change in azimuths of thermal lineaments and sulfuric clusters from the dominating trend NW-SE by ~90 degrees to NE-SW. We conjecture this to be controlled by a permeability contrast due to a subsurface structure or crater intersection, facilitating a more direct gas ascent in the center of the fumarole field. We provide a precise and complete database for the state and extent of the La Fossa fumarole field, which can be used for comparative monitoring of spatio-temporal changes within the hydrothermal system at the surface.

Description: Quinoa (Chenopodium quinoa Willd.), an herb belonging to the amaranth family, is rich in minerals, amino acids, vitamins, proteins, and flavonoids. Its grain, compared with other major grains, has unique nutritional value with tremendous applications. This study used four independently bred high-generation lines (seed colors) of quinoa as materials to further understand the metabolic differences in the filling periods of quinoa varieties. Additionally, the non-targeted metabolome of quinoa seeds 35 and 42 days after flowering, respectively, were studied via liquid chromatography-mass spectrometry. The two filling periods of yellow, white, black, and red quinoa grains resulted in significant differences in the metabolites, particularly in L-methionine, S-adenosyl-L-homocysteine, S-adenosyl-L-methionine, pyruvate, fumarate, and oxaloacetate. Soluble sugar, amino acid, and fatty acid contents in quinoa increased after 42 days of flowering. There were metabolic differences between the sugar phosphates (L-fucose, D-mannose-6-phosphate, xylulose-5-phosphate, sedoheptulose-7-phosphate), amino acid (alanine), and organic compounds (kynurenate, tryptamine, serotonin, bilirubin) among the four quinoa varieties. The relative difference in the metabolites was largest when the yellow quinoa grain was compared with the other quinoa varieties and smallest when the red and black varieties were compare. The results of this study provide a basis for the reproduction and identification of new quinoa varieties, as well as for screening potential quality control target genes by combining genomics and transcriptomics.

Description: Highlights • Release of additives from plastic pollution may harm wildlife. • Robust methods to characterise additives and their leaching behaviour are needed. • Extraction and leaching methods are informed from well-established industry methods. • Recommended approaches for extraction and leaching studies are presented. • The use of environmentally relevant methods and test materials is advised. Plastic pollution is prevalent worldwide and has been highlighted as an issue of global concern due to its harmful impacts on wildlife. The extent and mechanism by which plastic pollution effects organisms is poorly understood, especially for microplastics. One proposed mechanism by which plastics may exert a harmful effect is through the leaching of additives. To determine the risk to wildlife, the chemical identity and exposure to additives must be established. However, there are few reports with disparate experimental approaches. In contrast, a breadth of knowledge on additive release from plastics is held within the food, pharmaceutical and medical, construction, and waste management industries. This includes standardised methods to perform migration, extraction, and leaching studies. This review provides an overview of the approaches and methods used to characterise additives and their leaching behaviour from plastic pollution. The limitations of these methods are highlighted and compared with industry standardised approaches. Furthermore, an overview of the analytical strategies for the identification and quantification of additives is presented. This work provides a basis for refining current leaching approaches and analytical methods with a view towards understanding the risk of plastic pollution.

Description: We processed three quinoa ecotypes as they are commonly consumed in a daily diet. For the treatments, quinoa seeds were washed, cooked, and/or germinated. Following treated, we used 1H NMR-based metabolomic profiling to explore differences between the ecotypes. Then, for a non-targeted and targeted food fingerprint analysis of samples, we performed multivariable data analyses, including principal component analysis (PCA), orthogonal partial least squares discriminant analysis (OPLS-DA), and hierarchical cluster analysis. From our study, we were able to discriminate each quinoa ecotype regardless of treatment based on its metabolomic profiling. Additionally, we were able to identify 30 metabolites that were useful to determine the effect of each treatment on nutritional composition. Germination increased the content of most metabolites irrespective of ecotype. In general, ecotype CQE_03 was different from ecotypes CQE_01 and CQE_02. Our phytochemical analysis revealed the effects of washing, cooking, and/or germination, particularly on saponins content.

Description: Highlights • Carbon dioxide + propane mixtures are studied through accurate measurements of speeds of sound and phase equilibria. • Heat capacities and virial coefficients are obtained from speeds of sound. • Retrograde condensation zone is found for the (0.60 CO2 + 0.40 C3H8) mixture. • Results are compared with reference equations of state such as GERG-2008 and AGA8-DC92. This work presents phase envelope and speed of sound data for the (0.60 CO2 + 0.40 C3H8) and (0.80 CO2 + 0.20 C3H8) binary mixtures. Phase equilibria was measured using a cylindrical resonator working in the microwave band whereas an acoustic resonator was used for speed of sound measurements. The experimental results were compared with GERG-2008 equation of state, obtaining average absolute deviations by 0.24% in pressure for phase equilibria data and 0.025% for speed of sound data. Speed of sound values were used to derive perfect-gas heat capacities, acoustic virial coefficients, and second density virial coefficients. In addition, AGA8-DC92 equation of state performance was checked for the results derived from speeds of sound.

Description: Opportunities to include Cetancodontamorpha in the study of the evolution of the immune system in the clades of Artiodactylamorpha, Ruminantiamorpha, Suinamorpha, and Camelidamorpha have increased with the use of the bottlenose dolphin, Tursiops truncatus, as a sentinel species to study the effects of environmental pollutants on the health of marine mammals. Efforts are currently underway to increase the number reagents needed for detailed studies. Thus far, screening of monoclonal antibodies (mAbs) made to leukocyte differentiation molecules (LDM) and the major histocompatibility (MHC) class I and class II molecules in Ruminantiamorpha have yielded some mAbs that recognize conserved epitopes expressed on orthologues in the bottlenose dolphin. More direct approaches are in progress to identify additional mAbs to bottlenose LDM and cytokines. As reported here, both direct and indirect approaches were used to identify mAbs specific for cytokines useful in monitoring the effects of environmental pollutants on the immune system. Immunization of mice with expressed bottlenose dolphin cytokines yielded mAbs specific for IFN-γ, TNF-α, IL-6, IL-8, IL-10, and IL-17A. Screening of previously developed mAbs used in livestock immunology research revealed mAbs developed against ovine IFN-γ and bovine IL-17 and IL-1β recognize conserved epitopes in bottlenose dolphin orthologues. The mAbs identified in the present study expand the reagents available to study the function of the immune system in bottlenose dolphins and cattle.

Description: Knowledge of the spatial distribution of dust aerosols and their effects on crops is important for policy formulation and food security. This study aims to investigate the impact of dust source susceptibility areas (DSSA) on the loss of agricultural crop and corresponding water consumption in terms of Water Footprint in the Great Salt Desert, Iran. To this goal, MODIS satellite images during the 2005–2020 period were used to identify dust sources and 135 dust source zones were identified. Machine learning algorithm viz. Random Forest (RF), generalized linear model (GLM), and Artificial neural network (ANN) were tested to reproduce DSSA. The best method was RF and applied to calculate and classify DSSA in five risk levels from very low to very high. The amount of wheat production under high risk of DSSA was estimated using the average crop yield from recent years using agriculture statistics. We calculated the loss of crops and corresponding water consumption for three scenarios, assuming a typical loss of 20, 40, and 60% of the wheat production for better crop loss estimation. Finally, the spatial relationships between wheat farmland and high-risk DSSA were assessed using ordinary least squares regression (OLS) and geographically weighted regression (GWR) at sub-watershed scale. The area of wheat cultivation in high and very high risk of DSSA is 10188.04 km2, which is 36% of all agricultural land for wheat in the region. Loss of wheat crop to DSSA meant that 1270.58 to 3811 million m3 water used for the production of wheat were lost, corresponding to 2%, to 7% of lost water compared to the total water consumption for wheat production in the study area.

Description: Most air quality stations in Spain exceeded the European Union's daily PM10 limit due to the February 2016 Saharan dust outbreak, which resulted from two successive dust storms in Northwest Africa. This study identifies the meso-β/meso-γ-scale dynamical processes responsible for developing these dust storms using observations and high-resolution Weather Research and Forecasting model coupled with Chemistry simulations. The results revealed that the first dust storm was associated with a strong barrier jet (BJ). The BJ formed on the southeastern foothills of the Saharan Atlas Mountains (SAM) when an easterly-northeasterly low-level Mediterranean flow was blocked by a stably stratified layer close to the SAM. The BJ intensified just after sunrise on 20 February and the associated near-surface peak winds organized the first dust storm. The second dust storm was linked to a mesoscale gravity wave (MGW) and hydraulic jumps. A long-lived westward propagating MGW was triggered by a downslope flow interacting with the stable layer near the northeastern edge of the Tinrhert Plateau in eastern Algeria. When this MGW crossed the Tademaït Plateau, hydraulic jumps formed on its lee side. The strong winds accompanying these hydraulic jumps formed the second dust storm on 21 February. The lifted dust extended over a depth of 2–3 km in the growing daytime boundary layer and was advected poleward by the southerly/southeasterly mid-tropospheric winds. Our results underline the importance of resolving terrain-induced mesoscale processes to understand dust storm dynamics, which are difficult to represent in coarse-resolution numerical models.

Description: Pseudomonas is one the best studied bacterial genera, and it is the genus with the highest number of species among the gram-negative bacteria. Pseudomonas spp. are widely distributed and play relevant ecological roles; several species are commensal or pathogenic to humans, animals and plants. The main aim of the present minireview is the discussion of how the Pseudomonas taxonomy has evolved with the development of bacterial taxonomy since the first description of the genus in 1894. We discuss how the successive implementation of novel methodologies has influenced the taxonomy of the genus and, vice versa, how the taxonomic studies developed in Pseudomonas have introduced novel tools and concepts to bacterial taxonomy. Current phylogenomic analyses of the family Pseudomonadaceae demonstrate that a considerable number of named Pseudomonas spp. are not monophyletic with P. aeruginosa, the type species of the genus, and that a reorganization of several genera can be foreseen. Phylogenomics of Pseudomonas, Azomonas and Azotobacter within the Pseudomonadaceae is presented as a case study. Five new genus names are delineated to accommodate five well-defined phylogenetic branches that are supported by the shared genes in each group, and two of them can be differentiated by physiological and ecological properties: the recently described genus Halopseudomonas and the genus Stutzerimonas proposed in the present study. Five former Pseudomonas species are transferred to Halopseudomonas and 10 species to Stutzerimonas.

Description: Highlights • Broad analysis of bias propagation with seven irradiance data sets in PV model. • We identify seasonal and regional biases in irradiance and PV power. • There is no single data set performing best in all metrics for means and variability. Abstract Model estimates of expected photovoltaic (PV) power production rely on accurate irradiance data. Reanalysis and satellite products freely provide irradiance data with a high temporal and spatial resolution including locations for which no ground-based measurements are available. We assess differences in such gridded irradiance data and quantify the subsequent bias propagation from individual radiation components to capacity factors in a contemporary PV model. PV power production is simulated based on four reanalysis (ERA5, COSMO-REA6, COSMO-REA6pp, COSMO-REA2) and three satellite products (CAMS, SARAH-2, CERES Syn1Deg). The results are compared against simulations using measurements from 30 weather stations of the German Weather Service. We compute metrics characterizing biases in seasonal and annual means, day-to-day variability and extremes in PV power. Our results highlight a bias of −1.4% (COSMO-REA6) to ＋8.2% (ERA5) in annual and spatial means of PV power production for Germany. No single data set is best in all metrics, although SARAH-2 and the postprocessed COSMO-REA6 data (COSMO-REA6pp) outperform the other products for many metrics. SARAH-2 yields good results in summer, but overestimates PV output in winter by 16% averaged across all stations. COSMO-REA6pp represents day-to-day variability in the PV power production of a simulated PV fleet best and has a particularly small bias of 0.5% in annual means. This is at least in parts due to compensating biases in local and seasonal means. Our results imply that gridded irradiance data should be used with caution for site assessments and ideally be complemented by local measurements.

Description: Submarine geomorphology, the study of landforms and processes within the submarine domain, is a young discipline that owes its birth to technological achievements that made it possible to explore the underwater sphere of our Earth system. Submarine domains represent over 70% of Earth's surface, i.e. the largest geomorphic system on our planet (more than twice the size of what we can observe on Earth's land surface). From the middle of the last century onwards, technological advances have led to more and more high-performance acoustic equipment and robotic underwater systems, enabling us to depict and investigate, in ever greater detail, parts of the ocean floor long thought to be unfathomable. The present chapter gives an overview of the extent to which technological progress has strongly determined the way in which the study of landscapes and landforms within the submarine domain is approached, creating substantial differences to approaches used in classical studies of geomorphology. Main drivers of seafloor geomorphic changes are introduced to provide a representative summary of the variety of landforms generated by the action of a range of tectonic, sedimentary, and bio-geochemical processes, including the impact of human activity. The chapter concludes with a brief discussion on the relevance of the applied value of submarine geomorphological research, its new trends, and the key contribution it is providing to confirming the importance of geomorphology to the full range of Earth system sciences and environment-related topics.

Description: This chapter gives an overview of the general biogeochemistry in the Mediterranean Sea explaining the particularities of the main biogeochemical variables and the physical, biological, and geochemical processes driving their distribution in the main basins of this marginal sea. Each subsection focuses on one essential variable, starting from dissolved oxygen and following inorganic nutrients, dissolved organic carbon and the CO2 system. A brief overview on the utility of those biogeochemical variables to identify water masses is also given. The chapter concludes with a summary of the projections and threats on biogeochemistry in the Mediterranean Sea under different future climate change scenarios.

Description: We emphasize the importance of marine silicate weathering (MSiW) reactions in anoxic sediment as fundamental in generating alkalinity and cations needed for carbonate precipitation and preservation along continental margins. We use a model that couples thermodynamics with aqueous geochemistry to show that the CO2 released during methanogenesis results in a drop in pH to 6.0; unless these protons are buffered by MSiW, carbonate minerals will dissolve. We present data from two regions: the India passive margin and the active subduction zone off Japan, where ash and/or rivers supply the reactive silicate phase, as reflected in strontium isotope data. Offshore India and Korea, alteration of continent-derived silicates results in pore water enriched in radiogenic 87Sr, with 87Sr/86Sr ratios as high as 0.7095 and 0.7104, respectively. Off Japan, strontium in pore water influenced by ash alteration is depleted in 87Sr, with 87Sr/86Sr as low as 0.7065. Carbonate minerals formed by alkalinity and cations generated through MSiW carry these strontium isotopic signals, and are typically dolomite, siderite, and Fe-rich calcite. These contrast with the aragonite and high-magnesium calcite that form during anaerobic oxidation of methane and incorporate the coeval seawater 87Sr/86Sr signal. We show that MSiW is necessary for authigenic carbonate formation and preservation along continental margins, which remove carbon from Earth's surface at rates previously estimated to be at least 1012 mol yr−1. In addition, these authigenic carbonates are of relevance to studies of the deep biosphere, fluid flow, seismogenesis, slope stability, and reservoir characteristics.

Description: Highlights • Cadomian continental arc crust of NE Iran was built during ∼15 Myr of magmatism. • Magmatic flare-up in Iran Cadomia occurred over ∼45 Myr; 570 to 525 Ma. • Geochemical differentiation in “hot zones” built the stratified continental crust of Iran. Abstract The generation and differentiation of continental crust by arc magmatism is strongly influenced by episodes of high magmatic flux (“flare-ups”). Magmatic flare-ups encourage the development of deep crustal hot zones where magmatic differentiation and density stratification combine to form the upper felsic and lower mafic continental crust. Such processes, which are responsible for the construction of continental arc crust, are prolonged events, which build a ∼30-40 km arc crust over tens of million years (∼100 Myr). New zircon U-Pb data reveal that the construction of Cadomian crust from NE Iran occurred over ∼15 ± 0.3 Myr. However, compiled zircon U-Pb ages reveal a prolonged magmatic flare-up of ∼45 Myr; ∼570 to 525 Ma. Basement outcrops in NE Iran expose lower- and upper crust that show how magmatic-geochemical differentiation occurred deep beneath a Cadomian continental arc in a crustal hot zone. Isotopic data for igneous rocks produced during this 45 Myr episode reveal interactions between mantle-derived melts and old continental crust. Synthesis of new and published data indicates that this type of interaction is common during periods of high magmatic fluxes. Our results indicate that differentiation of mafic melts in the lower crust during prolonged magmatic flare-ups plays a key role in building a stratified continental crust.

Description: Highlights • Total amount of generated biogenic methane is estimated at ~3100 Gt. • Total amount of generated thermogenic methane is estimated at ~1,560 Gt. • The Maykop formation is partially productive in the central basin and not yet fully productive towards the basin peripherals. A new numerical model reconstructing the depositional history (98–0 Ma) of the Western Black Sea sub-basin is presented. The model accounts for changing boundary conditions (i.e. water depth, bottom water temperature, heat flow evolution over time) and estimates the rates and total amounts of the in-situ biogenic methane generation and thermally-driven organic matter maturation in the source rocks. The overall thermogenic and biogenic gas generation predicted by the model is estimated at ~1560 Gt and ~3100 Gt, respectively.

Description: The clumped isotope (Δ47) proxy is a promising geochemical tool to reconstruct past ocean temperatures far back in time and in unknown settings, due to its unique thermodynamic basis that renders it independent from other environmental factors like seawater composition. Although previously hampered by large sample-size requirements, recent methodological advances have made the paleoceanographic application of Δ47 on small (〈5 mg) foraminifer samples possible. Previous studies show a reasonable match between Δ47 calibrations based on synthetic carbonate and various species of planktonic foraminifers. However, studies performed before recent methodological advances were based on relatively few species and data treatment that is now outdated. To overcome these limitations and elucidate species-specific effects, we analyzed 14 species of planktonic foraminifers in sediment surface samples from 13 sites, covering a growth temperature range of ∼0–28 °C. We selected mixed layer-dwelling and deep-dwelling species from a wide range of ocean settings to evaluate the feasibility of temperature reconstructions for different water depths. Various techniques to estimate foraminifer calcification temperatures were tested in order to assess their effects on the calibration and to find the most suitable approach. Results from this study generally confirm previous findings that there are no species-specific effects on the Δ47-temperature relationship in planktonic foraminifers, with one possible exception. Various morphotypes of Globigerinoides ruber were found to often deviate from the general trend determined for planktonic foraminifers. Our data are in excellent agreement with a recent foraminifer calibration study that was performed with a different analytical setup, as well as with a calibration based exclusively on benthic foraminifers. A combined, methodologically homogenized dataset also reveals very good agreement with an inorganic calibration based on travertines. Our findings highlight the potential of the Δ47 paleothermometer to be applied to recent and extinct species alike to study surface ocean temperatures as well as thermocline variability for a multitude of settings and time scales.

Description: Deformation during CO2 injection can lead to problems, like seismicity or fluid leaks, but small strains have the potential to be a useful signal for monitoring. The objective of this paper is to evaluate the possible evolution of the strain field during injection, and then assess existing and emerging techniques for measuring the strain field. Poroelastic analyses show that normal strains caused by injection into a reservoir are tensile in the vicinity of the well, but everywhere else at least one strain component is compressive. The vertical strain is compressive in the confining unit, and the radial strain decreases and changes sign from tensile to compressive with distance from the well. Tilting is away from the injection well at the ground surface, but it is towards the well overlying the reservoir. Methods for measuring in-situ strain include instruments that are grouted in the annulus between casing and wall rock (∼ 0.1 microstrain resolution), portable strain sensors that are temporarily clamped to the borehole wall (∼ 0.01 microstrain resolution), and strainmeters that are grouted in place (∼0.001 microstrain resolution). Instruments for measuring in-situ normal strains at the magnitudes and rates expected during injection are emerging, but they have yet to be fully evaluated in applications related to CO2 storage. In-situ strain data measured with emerging instruments promises to fill an important gap between the episodes of fast strain rates measured by seismic data, and the slow strains measured over relatively long periods of time by InSAR and GPS.

Description: Estuarine systems are of key importance for the riverine input of silicon (Si) to the ocean, which is a limiting factor of diatom productivity in coastal areas. This study presents a field dataset of surface dissolved Si isotopic compositions (30SiSi(OH)4) obtained in the estuaries of three of the world’s largest rivers, the Amazon (ARE), Yangtze (YRE), and Pearl (PRE), which cover different climate zones. While 30SiSi(OH)4 behaved conservatively in the YRE and PRE supporting a dominant control by water mass mixing, significantly increased 30SiSi(OH)4 signatures due to diatom utilization of Si(OH)4 were observed in the ARE and reflected a Si isotopic enrichment factor 30 of −1.0±0.4‰ (Rayleigh model) or −1.6±0.4‰ (steady state model). In addition, seasonal variability of Si isotope behavior in the YRE was observed by comparison to previous work and most likely resulted from changes in water residence time, temperature, and light level. Based on the 30 value obtained for the ARE, we estimate that the global average 30SiSi(OH)4 entering the ocean is 0.2-0.3‰ higher than that of the rivers due to Si retention in estuaries. This systematic modification of riverine Si isotopic compositions during estuarine mixing, as well as the seasonality of Si isotope dynamics in single estuaries, needs to be taken into account for better constraining the role of large river estuaries in the oceanic Si cycle.

Description: Highlights: • Assessment of the Indian Ocean simulation from global forced sea- ice models. • SST biases are 2 times smaller in forced simulations than the coupled simulations. • Coupled model shows large inter-model spread over the eastern equatorial Indian Ocean. • Refinement in model horizontal resolution does not significantly improve simulations. • Uncover a secondary pathway of northward cross-equatorial transport along 75 °E. • Models are unable to capture the observed thick barrier layer in the north Bay of Bengal. Abstract: We present an analysis of annual and seasonal mean characteristics of the Indian Ocean circulation and water masses from 16 global ocean–sea-ice model simulations that follow the Coordinated Ocean-ice Reference Experiments (CORE) interannual protocol (CORE-II). All simulations show a similar large-scale tropical current system, but with differences in the Equatorial Undercurrent. Most CORE-II models simulate the structure of the Cross Equatorial Cell (CEC) in the Indian Ocean. We uncover a previously unidentified secondary pathway of northward cross-equatorial transport along 75 °E, thus complementing the pathway near the Somali Coast. This secondary pathway is most prominent in the models which represent topography realistically, thus suggesting a need for realistic bathymetry in climate models. When probing the water mass structure in the upper ocean, we find that the salinity profiles are closer to observations in geopotential (level) models than in isopycnal models. More generally, we find that biases are model dependent, thus suggesting a grouping into model lineage, formulation of the surface boundary, vertical coordinate and surface salinity restoring. Refinement in model horizontal resolution (one degree versus degree) does not significantly improve simulations, though there are some marginal improvements in the salinity and barrier layer results. The results in turn suggest that a focus on improving physical parameterizations (e.g. boundary layer processes) may offer more near-term advances in Indian Ocean simulations than refined grid resolution.

Description: Tracking climate change and its relationships with chemical weathering and massive volcanic activity in deep-time greatly improves our understanding of the Earth's climate system. The Permo-Carboniferous period is a critical time interval with million year-scale glacial-deglacial cycles and massive basaltic volcanism, such as the Skagerrak-Centered (also named Skagerrak or Jutland) large igneous province. To explore the volcanism-climate interactions in this period, we obtained high precision CA-TIMS U-Pb zircon ages for three tuffaceous layers from a cored upper Pennsylvanian-lower Permian marginal marine succession in southern North China. These ages calibrate the Permo-Carboniferous biostratigraphy between ∼301–296 Ma in North China. From this dated core succession, mudrock samples and their calculated weathering index values were screened to constrain the weathering trends for the source landscapes and demonstrate a rapid increase with a subsequent decrease in source chemical weathering intensity during the period of ∼299 to 296.5 Ma. These trends coincide with the southern Gondwana glacial records, low latitude temperature changes, relative sea-level variations, and shifts in atmospheric pCO2 that together document an earliest Permian climate warming-cooling perturbation with a temperature maximum at ∼298 Ma. This climate warming in the Permo-Carboniferous icehouse correlates with the emplacement of the Skagerrak-Centered large igneous province, which likely released voluminous CO2 that led to climate warming during the Permo-Carboniferous transition. The immediately following cooling could possibly result from the rapid post-eruptional weathering of the massive basaltic rocks of this province in tropical latitudes, which would have sequestered atmospheric CO2 and promoted return to cooler icehouse conditions. This study supports the assertation that massive basaltic volcanism could first cause rapid climate warming and then may have an overall net cooling effect as previously suggested for the Deccan Traps and the Central Atlantic Magmatic Province.

Description: Highlights • High-Ti lavas have the same composition as Walvis Ridge and Gough Subtrack. • Low-Ti lavas are derived from a distinct source compare to the high-Ti lavas. • High-Ti and low-Ti basalts reflect the spatial zonation of the plume head. • Tristan-type composition has not been discovered in the plume head stage. • Sr-Nd-Pb-Hf isotopes from Etendeka flood basalts. Abstract The origin and distribution of geochemically distinct source components in continental flood volcanism (generally associated with the initial phase of a mantle plume head) are poorly understood. Here we present new geochemical (major and trace element and Sr-Nd-Pb-Hf isotope) data from the Etendeka flood basalts and associated dikes from northern and central Namibia that are believed to have been produced during the initial stage of the Tristan-Gough hotspot. Following earlier studies, the Etendeka lava flows and dikes are divided into high-Ti and low-Ti groups. The trace element and isotopic composition of the high-Ti tholeiitic basalts, exclusively outcropping in northern Etendeka (northwestern Namibia), are similar to the Gough-type enriched mantle I (EMI) composition found on the Walvis Ridge (the Atlantic type locality for the EMI end member). The low-Ti tholeiitic basalts, primarily outcropping in Southern Etendeka (central western Namibia), have higher 143Nd/144Nd and 207Pb/204Pb but lower 208Pb/204Pb ratios than the Gough composition. Combining our data with newly published 3He/4He data and estimates of the magma source’s potential temperature from 1520-1680◦C, we conclude that the source of the low-Ti basalts was also intrinsic to the Tristan-Gough plume, consistent with a spatially-zoned plume head. The low-Ti basalts were derived from a distinct EMI-type source component that has thus far only been detected in the initial Tristan-Gough plume head (∼132 Ma), but not the later submarine hotspot track.

Description: Oceanic island basalts are targeted for geochemical study because they provide a direct window into mantle composition and a wealth of information on the dynamics and timescales associated with Earth mixing. Previous studies mainly focused on the shield volcanic stage of oceanic islands and the more fusible, enriched mantle components that are easily distinguished in those basalts. Mantle depleted compositions are typically more difficult to resolve unless large amounts of this material participated in mantle melting (e.g., mid-ocean ridges), or unique processes allow for their compositions to be erupted undiluted, such as very small degrees of melting of a source with minimal fusible enriched components (e.g., rejuvenated basalts) or as xenoliths (e.g., abyssal peridotites). Mantle depleted components, defined here as material with low time-integrated Rb/Sr (low 87Sr/86Sr) and high time-integrated Sm/Nd and Lu/Hf ratios (high 143Nd/144Nd and 176Hf/177Hf) relative to primitive mantle, derive from a potentially very large volume reservoir (up to 80% of the mantle), and therefore need adequate characterization in order estimate the composition of the Earth and mantle-derived melts. This review focuses on mantle depleted compositions in oceanic island basalts using the Hawaiian-Emperor chain as a case study. The Hawaiian-Emperor chain is the ∼6000 km long geological record of the deeply sourced Hawaiian mantle plume, active for 〉81 Myr. Hawaiian volcanism evolves through four volcanic stages as a volcano traverses the Hawaiian plume: alkalic preshield, tholeiitic shield (80–90% volcano volume), alkalic postshield (∼1%), and silica undersaturated rejuvenated (〈0.1%). We report Pb-Sr-Nd-Hf isotope compositions and trace element concentrations of three rejuvenated Northwest Hawaiian Ridge basalts and compare them to an exhaustive compiled dataset of basalts from the Hawaiian Islands to the Emperor Seamounts. The Northwest Hawaiian Ridge (NWHR) includes 51 volcanoes spanning ∼42 m.y. between the bend in the Hawaiian-Emperor chain and the Hawaiian Islands where there is no high-precision isotopic data published on the rejuvenated-stage over ∼47% of the chain. NWHR and Hawaiian Island rejuvenated basalts are geochemically similar, indicating a consistent source for rejuvenated volcanism over ∼12.5 million years. In contrast, shield-stage basalts from the oldest Emperor Seamounts are more depleted in isotopic composition (i.e., higher 176Hf/177Hf, and 143Nd/144Nd with lower 87Sr/86Sr and 208Pb*/206Pb*) and trace element concentrations (i.e., much lower concentrations of highly incompatible elements) than all other depleted Hawaiian basalts younger than the bend, including NWHR rejuvenated basalts. The strongly depleted source for the oldest Emperor Seamounts (〉70 Ma) was likely related to interaction with the Kula-Pacific-Izanagi mid-ocean ridge spreading system active near the Hawaiian plume in the Late Cretaceous. In contrast, the incompatible trace element ratios of NWHR rejuvenated basalts require a distinct source in the Hawaiian mantle plume that was imprinted by ancient (〉1 Ga) partial melting, likely ancient recycled oceanic lithosphere. This review of the geochemistry of Hawaiian depleted components documents the need for the sampling of multiple distinctive depleted compositions, each preferentially melted during specific periods of Hawaiian plume activity. This suggests that the composition of depleted components can evolve during the lifetime of the mantle plume, as observed for enriched components in the Hawaiian mantle plume. Changes in the composition of depleted components are dominantly controlled by the upper mantle tectonic configurations at the time of eruption (i.e., proximity to a mid-ocean ridge), as this effect overwhelms the signal imparted by potentially sampling different lower mantle components through time.

Description: Highlights • The syntectonic Otjimbingwe alkaline complex (Namibia) is ca. 545 Ma old. • Metasomatized mantle-derived melts are modified by AFC and accumulation processes. • The alkaline melts intruded during extensional tectonics during flat subduction. The ~545 Ma-old syn-collisional Otjimbingwe alkaline complex is composed of pyroxene-amphibole-biotite-bearing, mildly nepheline-normative to quartz-normative rocks ranging in composition from monzogabbro to monzonite, syenite and granite. The alkaline rocks have moderate to high SiO2 (50.5–73.0 wt%) and Na2O + K2O (5.1–11.5 wt%) and moderate to low MgO (6.6–0.2 wt%) concentrations. All samples have high large ion lithophile element (LILE: Ba up to 4600 ppm) and high-field-strength element contents (HFSE; Zr: 155–1328 ppm; Nb: 16–110 ppm; Ta: 1.4–7.1 ppm and Hf: 4–24 ppm) and have strongly fractionated LREE patterns ((La/Yb)N = 14–51). The most primitive members lack significant negative Eu anomalies. Mantle-normalized multi-element diagrams show depletion in Ba, Rb, Nb (Ta), P and Ti. The alkaline rocks have moderate radiogenic initial 87Sr/86Sr ratios (0.7061–0.7087) and unradiogenic initial ɛNd values (−3.9 to −6.1). This isotope signature, associated with high LREE/HFSE ratios indicates that the parental melts were generated in enriched portions of the shallow lithospheric mantle, which was probably affected by previous subduction zone processes. In addition, correlations between Sr and Nd isotopes indicate that some of these variations result from combined crustal assimilation and fractional crystallization (AFC) processes. A new model of flat subduction is presented that explains most of the unsolved problems in the orogenic evolution of the Damara orogen, namely (i) the absence of early intrusive rocks with a clear subduction zone setting, (ii) the absence of high-pressure rocks such as blueschists and eclogites, (iii) the unusual distribution of igneous rocks with a clear predominance of granite and granodiorite and (iv) the need for a asthenospheric window during a classical subduction to explain the high T/moderate P granulite facies conditions in the overriding plate.

Description: Glacial meltwater is an important source of bioessential trace elements to high latitude oceans. Upon delivery to coastal waters, glacially sourced particulate trace elements are processed during early diagenesis in sediments and may be sequestered or recycled back to the water column depending on local biogeochemical conditions. In the glaciated fjords of Svalbard, large amounts of reactive Fe and Mn (oxyhydr)oxides are delivered to the sediment by glacial discharge, resulting in pronounced Fe and Mn cycling concurrent with microbial sulfate reduction. In order to investigate the diagenetic cycling of selected trace elements (As, Co, Cu, Mo, Ni, and U) in this system, we collected sediment cores from two Svalbard fjords, Van Keulenfjorden and Van Mijenfjorden, in a transect along the head-to-mouth fjord axis and analyzed aqueous and solid phase geochemistry with respect to trace elements, sulfur, and carbon along with sulfate reduction rates. We found that Co and Ni associate with Fe and Mn (oxyhydr)oxides and enter the pore water upon reductive metal oxide dissolution. Copper is enriched in the solid phase where sulfate reduction rates are high, likely due to reactions with H2S and the formation of sulfide minerals. Uranium accumulates in the solid phase likely following reduction by both Fe- and sulfate-reducing bacteria, while Mo adsorbs to Fe and Mn (oxyhydr)oxides in the surface sediment and is removed from the pore water at depth where sulfidization makes it particle-reactive. Arsenic is tightly coupled to Fe redox cycling and its partitioning between solid and dissolved phases is influenced by competition with FeS for adsorption sites on crystalline Fe oxides. Differences in trace element cycling between the two fjords suggest delivery of varying amount and composition of tidewater glacier (Van Keulenfjorden) and meltwater stream (Van Mijenfjorden) material, likely related to oxidative processes occurring in meltwater streams. This processing produces a partially weathered, more reactive sediment that is subject to stronger redox cycling of Fe, Mn, S, and associated trace elements upon delivery to Van Mijenfjorden. With climate warming, the patterns of trace element cycling observed in Van Mijenfjorden may also become more prevalent in other Svalbard fjords as tidewater glaciers retreat into meltwater stream valleys.

Description: Highlights • Highly variable sea-ice conditions off eastern North Greenland during the Holocene. • The mid to late Holocene is characterized by seasonal to marginal sea-ice conditions. • Seasonal formation of the Northeast-Water (NEW) Polynya during the last 1 ka. Understanding the processes controlling the natural variability of sea ice in the Arctic, one of the most dynamic components of the climate system, can help to constrain the effects of future climate change in this highly sensitive area. For the first time, a high-resolution biomarker study was carried out to reconstruct past sea-ice variability off eastern North Greenland. This area is strongly influenced by cold surface waters and drift ice transported via the East Greenland Current, meltwater pulses from the outlet glaciers of the Northeast Greenland Ice Stream and the build-up of landfast ice. The well-dated Holocene sedimentary section of Core PS93/025 provides insights into variations of the sea-ice conditions (regional and local sea-ice signal), oceanic and atmospheric circulation and the biotic response to these changes. These biomarker records show a reduced to variable sea-ice cover during the early Holocene between 10.2 and 9.3 ka, followed by a steady increase in sea-ice conditions during the mid Holocene. During the last 5–6 ka, sea-ice conditions remained more stable representing a seasonal to marginal sea-ice situation. Based on our biomarker records, stable sea-ice edge conditions, with a fully developed polynya situation occurred since the last 1 ka.

Description: Volcán Antuco (37°24′ S, 71°22′W; 2979 m asl) is the 13th ranked high threat volcano in Chile with 27 recorded historical eruptions, mostly (~96%) with volcanic explosivity indices (VEI) of ~1–2. An older eruptive record has been reconstructed from sections exposed on the western flank and is intimately related to a well-documented catastrophic sector collapse at ~7.2 cal ka BP. However, very little is known about Antuco's post-collapse eruptive history in other sectors, especially on the eastern flanks where prevalent westerly winds favor optimal eastward tephra transport and deposition. Our study reveals a more complete record of activity that has already been indicated from previous work with at least 23 tephra-forming explosive eruptions, most of them within the last c. 7.2 ka, including 4 events that have generated pyroclastic density currents that have widely inundated the lower eastern flanks. Tephra from these eruptive events are typically composed of scoria, free crystals and lithics, with occasional pumice. The composition of juvenile fragments varies between basalt and trachyandesite (50.2–62.2 wt% SiO2) and show phenocrysts of plagioclase, olivine and pyroxene. Our results show that most of the eruptions of Antuco (c. 79%) are Strombolian to violent Strombolian. These eruptions have an estimated longer repose times (c. 200 year) and are likely higher in magnitude than those registered during historical times. This study also shows that the composition, style and magnitude may change from one eruptive episode to the next. This eruptive variability seems in complete accord with recent findings from other centers in the Southern Volcanic Zone exhibiting similar temporal eruptive diversity and ultimately, has significant implications with respect to hazard assessment.

Description: The generation of magmas in the East African Rift System (EARS) is largely the result of either: (A) melting of easily fusible compositions located within the lithospheric mantle due to thermobaric perturbations of the lithosphere, or (B) melting of the convecting upper mantle due to decompression caused by thinning of the plate during extension. Melt generated from amphibole- or phlogopite-bearing metasomes within the lithospheric mantle yields alkaline, silica-undersaturated lavas, while more silica-saturated lavas are primarily a function of melting material within the convecting upper mantle. Sourcing of silica-undersaturated melts within the lithospheric mantle is consistent with the observed tendency for initial melts within any given region to exhibit trace element characteristics consistent with melting of lithospheric metasomes, likely reflecting the initial destabilization and thinning of the lithospheric mantle. With continued lithospheric thinning, the trend towards more silica-saturated compositions coincides with a shift towards compositions interpreted as melting of the convecting upper mantle. Contributions from these two sources may oscillate where extension is pulsed – melts of the convecting upper mantle are favored during periods of plate thinning; melting of either existing or recently formed metasomes may be favored during periods of relative extensional quiescence. The isotopic systematics of East African magmatism reveals significant complexity as to the specific reservoirs that may participate in the melting processes noted above. The lithospheric mantle beneath East Africa has undergone enrichment through the percolation of sub-lithospheric derived melts and fluids over an extended interval, which close to the Tanzania craton, has resulted in a layered lithospheric mantle exhibiting extreme isotopic ratios. Elsewhere, the lithospheric mantle has also undergone enrichment but given the more juvenile age of this lithosphere, less extreme isotopic values have developed. Material rising from the African Large Low Shear Velocity Province (LLSVP) has also metasomatized the lithospheric mantle, and thus lavas exhibiting a trace element signature linked to melting within the lithospheric mantle may exist as any number of reservoirs or mixtures of the same. Material derived from the convecting upper mantle incorporates the Afar Plume endmember, a depleted mantle endmember, and some form of lithospheric endmember. The isotopic characteristics of magma suites from throughout the region form arrays that broadly converge on the composition of the Afar Plume, despite some complexity where the plume material has formed a hybrid plume-lithosphere component. The convergence of these arrays strongly supports a model whereby the prevalent composition of material rising from the African LLSVP beneath the EARS is broadly equivalent to the composition of the Afar Plume.

Description: The current increase in atmospheric CO2 concentration induces changes in the seawater carbonate system resulting in decreased pH and calcium carbonate saturation state, a phenomenon called ocean acidification (OA). OA has long been considered as a major threat to echinoderms because their extensive endoskeleton is made of high‑magnesium calcite, one of the most soluble forms of calcium carbonate. Numerous studies addressed this question in sea urchins, but very few questioned the impact of OA on the sea star skeleton, although members of this taxon do not compensate their extracellular pH, contrary to most sea urchins. In the present study, adults of the common sea star, Asterias rubens from Kiel Fjord, a site experiencing natural acidification events exceeding pCO2 levels of 2500 μatm, were chronically exposed to different levels of simulated ocean acidification (pHT-SW 8.0, 7.4, 7.2), encompassing present and future conditions, for the duration of 109 days. Corrosion and mechanical properties of skeletal elements were studied using scanning electron microscopy, three-point bending tests as well as nanoindentation. The spines were significantly corroded at pHT-SW 7.4 and below while the ambulacral plates were only affected at pHT-SW 7.2. Nanoindentation of newly formed spines and ambulacral plates did not reveal significant CO2-induced differences in skeleton hardness or elasticity across treatments. Results of three-point bending tests revealed significantly reduced characteristic strength and fracture force of ambulacral plates from the median arm segment at pHT-SW 7.4 and below. These plates are those supporting the tube feet involved in the opening of bivalves during feeding and in the animal attachment to the substrate. Under reduced seawater pH, this might result in fracture of sea star plates during predation on mussel. The present results predict a possible impact of ocean acidification on the skeletal integrity of a marine keystone predator.

Description: In this study, we conducted an experimental panel survey in Norway, Germany and Portugal to explore consumers' willingness to pay more for products that are certified microplastic free. This is placed within the context of private certification schemes and private governance as mechanisms to increase consumer conscientiousness, establish a higher environmental standard in terms of microplastic and reduce marine pollution. We find that consumers in general are very conscious about the issue, would generally prefer products that are microplastics free, but would seldom choose these when there is a price premium on the label. This had a geographical offset though, with the results aligning with that of political trust in the nation, with Norwegians being less likely to purchase items with price premiums for private governance labels, and Portugal being most likely to – even with a price premium.

Description: Seamount phosphates are increasingly regarded as potential resources for rare earth elements (REE) and plus yttrium (REY). Carbonate fluorapatite (CFA) formed within seamount ferromanganese (FeMn) crusts is the most common seamount phosphate mineral. However, reports on the mineralogy and geochemistry of CFA are few and thus its origin and acquisition of trace elements are not well understood. In this study, we analyzed the major and trace elements of CFA in FeMn crusts collected from Western and Central Pacific seamounts to investigate the genesis of trace elements in the CFA. This is the first study to use in situ analytical techniques such as electron microprobe analyzer (EPMA) and laser ablation-inductively coupled plasma mass spectrometry (LA-ICP-MS) to analyze seamount CFA. We found that the CFA hosts abundant minor and trace elements and propose that ionic substitutions are responsible for the high contents of SO3, SiO2, REY, Sr, Na, Fe, and Mn in the CFA veins found in the FeMn crusts, i.e., SiO32− and SO42− substitute for PO42−, while REE3+, Y3+, Na+, Fe2+, and Mn2+ substitute for Ca2+. REE3+ substitutions for Ca2+ in the CFA are charge-compensated by Na+ substitution for Ca2+. Fourier transform infrared spectroscopy (FTIR) analysis shows that CO32– mainly substitutes for PO42− in the CFA crystal structure, and there is a minor substitution of PO42− by CO3F3−. Ocean water is the major source of the P and REY, which when precipitated as seamount CFA is characterized by high ∑REE (345 to 6016 ppm) and heavy-REE (HREE) enrichments. Monazite grains dispersed in the seamount CFA contribute trace amount of REY. These results shed light on the composition and element mobility of seamount CFA with economic potential, which also provides valuable insights into global ocean chemical cycling (e.g. REE).

Description: The desiccation tolerance of the intertidal seagrass Zostera japonica has been demonstrated in a number of studies; however, the factors limiting expansion of intertidal seagrass species into subtidal zones remain controversial. We transplanted Z. japonica shoots from the intermediate intertidal zone into the plots with and without Z. marina shoots in both the lower intertidal and shallow subtidal zones to investigate the factors controlling Z. japonica growth in these zones. Daily photon flux density at the Z. japonica canopy level was attenuated by both water depth and coexisting Z. marina shoots but more strongly by Z. marina shoots than water depth in the transplant plots. The shoot density and biomass of Z. japonica transplants were significantly lower in transplant plots in the subtidal zone than in the lower intertidal zone. Although the photon flux density was significantly lower in transplant plots containing Z. marina shoots, the growth of Z. japonica transplants did not differ significantly between plots with and those without Z. marina shoots. Z. japonica transplants exhibited photoacclimatory responses such as increased shoot height and chlorophyll content under the lower-light conditions, offsetting the reduced light availability so that no significant differences in transplant growth occurred between plots with and those without Z. marina shoots. As the growth of Z. japonica transplants decreased significantly in the subtidal zone, the interactive effects of environmental stresses associated with tidal inundation and reduced light availability may restrict penetration of the intertidal seagrass Z. japonica into the subtidal zone. The persistence of high photosynthetic performance after air exposure and a regular arrangement of the densely overlapped leaves atop wet sediments may be desiccation tolerance mechanisms for Z. japonica in the intertidal zone.

Description: Enrichment of the oceans with CO2 may be beneficial for some marine phytoplankton, including harmful algae. Numerous laboratory experiments provided valuable insights into the effects of elevated pCO(2) on the growth and physiology of harmful algal species, including the production of phycotoxins. Experiments close to natural conditions are the next step to improve predictions, as they consider the complex interplay between biotic and abiotic factors that can confound the direct effects of ocean acidification. We therefore investigated the effect of ocean acidification on the occurrence and abundance of phycotoxins in bulk plankton samples during a long-term mesocosm experiment in the Gullmar Fjord, Sweden, an area frequently experiencing harmful algal blooms. During the experimental period, a total of seven phycotoxin-producing harmful algal genera were identified in the fjord, and in accordance, six toxin classes were detected. However, within the mesocosms, only domoic acid and the corresponding producer Pseudo-nitzschia spp. was observed. Despite high variation within treatments, significantly higher particulate domoic acid contents were measured in the mesocosms with elevated pCO(2). Higher particulate domoic acid contents were additionally associated with macronutrient limitation. The risks associated with potentially higher phycotoxin levels in the future ocean warrants attention and should be considered in prospective monitoring strategies for coastal marine waters.

Description: Massive cyanobacteria blooms occur almost every summer in the Baltic Sea but the capability to quantitatively predict their extent and intensity is poorly developed. Here we analyse statistical relationships between multi-decadal satellite-derived time series of the frequency of cyanobacteria surface accumulations (FCA) in the central Baltic Sea Proper and a suite of environmental variables. Over the decadal scale (∼5-20 years) FCA was highly correlated (R2 ∼ 0.69) with a set of biogeochemical variables related to the amount of phosphorus and hypoxia in bottom layers. Water temperature in the surface layer was also positively correlated with FCA at the decadal scale. In contrast, the inter-annual variations in FCA had no correlation with the biogeochemical variables. Instead, significant correlations were found with the solar shortwave direct flux in July and the sea-surface temperature, also in July. It thus appears that it is not possible to predict inter-annual fluctuations in cyanobacteria blooms from water chemistry. Moreover, environmental variables could only explain about 45% of the inter-annual variability in FCA, probably because year-to-year variations in FCA are significantly influenced by biological interactions.

Description: Studies integrating mangrove in-situ observations and remote sensing analysis for specific sites often lack precise estimates of carbon stocks over time frames that include disturbance events. This study quantifies change in mangrove area from 1985 to 2018 with Landsat time series analysis, estimates above and belowground stored carbon using field data, and evaluates aboveground carbon stock changes after the 2004 Category 4, Hurricane Charley, in J.N. “Ding” Darling National Wildlife Refuge. Two allometric equation methods yielding similar results were used to estimate aboveground carbon content in three mangrove species found in the refuge. Aboveground carbon contained 67 (SE = 2) MgC ha−1 with a total refuge estimate of 74,504 MgC in 2018. Sediment contained 259 (SE = 28) MgC ha−1 for a total of 288,008 MgC in the refuge. The initial reduction in mangrove area caused by Hurricane Charley was between 0.6% and 5.3%, equivalent to between 427 MgC and 3,599 MgC under three different scenarios of carbon loss. As a result of the hurricane, approximately 61 ha of mangroves were disturbed, of which 24 ha had recovered by 2018, with 37 ha (~3% of the pre-hurricane mangrove area) still not recovered 14 years after the event. The 37 ha of mangroves that have not recovered are located in a tidally restricted area of the refuge. A longer recovery time in this area will likely result in a greater loss of carbon storage than in the rest of the refuge.

Description: Highlights • Geochemically diverse Late Cretaceous small-volume magmatism in the Sava-Vardar Zone. • Late Cretaceous ultrapotassic lava, equivalent of minette and kersantite. • Magma derivation from a LREE and K enriched, garnet-bearing anciently metasomatized mantle source. • Magmatism occurred either in a fore-arc setting or is associated with transtensional tectonics. Abstract Late Cretaceous global plate reorganization associated with the inception of counterclockwise rotation of Africa relative to Europe initiated in the Balkan region small-volume magmatism of diverse geochemical signature along the enigmatic Sava-Vardar Zone. We study a Late Cretaceous lamprophyric sill in Ripanj village near Belgrade to constrain this magmatic episode. The lamprophyre is characterized by high contents of Na, P, Fe and Al, and low contents of K, Ca and Mg. Its original nature (Na, K, Ca and Mg) is concealed by intense alteration (albitization of feldspar and partial chloritization of phlogopite) that erased the ultrapotassic affinity of the rocks and resulted in extremely low K/Na ratios. The recalculated chemical composition demonstrates that the rocks are ultrapotassic, with K2O and MgO 〉3 wt % and K2O/Na2O 〉 2, and belong to the durbachite-vaugnerite series, i. e., the plutonic equivalents of minettes and kersantites. Two phlogopite concentrates gave Ar–Ar ages of 86.80 ± 0.5 Ma and 86.90 ± 0.5 Ma. Our combined elemental and Sr–Nd–Pb isotope data (87Sr/86Sr 0.70667–0.70677, 143Nd/144Nd 0.512426–0.512429, 206Pb/204Pb 18.82–19.13, 207Pb/204Pb 15.67–15.68, 208Pb/204Pb 38.92–39.19) for representative lamprophyric samples suggests magma derivation from a light rare earth elements (LREE) and K enriched, metasomatized mantle source. The content of LREE of the rocks is enriched, whereas heavy rare earth elements (HREE) is depleted. Rare earth elements (REE) of the whole rock and REE of diopside all indicate that garnet was present in their source. There are two viable and mutually-excluding geodynamic scenarios for the Late Cretaceous magmatism in the Balkans: (i) If the Sava-Vardar ocean still existed in the Late Cretaceous and was subducted under the European plate with arc volcanism along the Apuseni-Banat-Timok-Panagyurishte-Srednjogorje belt, coeval magmatism in the Sava-Vardar Zone occurred in a fore-arc setting, and may be related to ridge subduction; (ii) If the Mesozoic ocean closed already during the Upper Jurassic or Lower Cretaceous, the Late Cretaceous volcanism within the Sava-Vardar Zone represents intracontinental volcanism associated with transtensional tectonics.

Description: The marine sulphur cycle is driven by the reduction of sulphate to sulphide coupled to microbial decomposition of organic matter. The sulphide produced by sulphate reduction may either react with Fe or organic matter to be buried as pyrite or organic sulphur, respectively; or may be oxidised through different pathways and intermediates. The amount of sulphide that is oxidised in marine sediments is not well constrained, yet oxidative sulphur cycling has critical implications for hypoxic coastal waters and oxygen minimum zones, carbon mineralisation, microbial metabolism and the interpretation of ancient and modern stable isotope signatures. Here, we present an experimental method to directly determine sulphide oxidation rates in undiluted marine sediment incubations. We find that sulphide oxidation rates in the top two centimetres of organic-rich coastal sediments were greater than rates of sulphide production through sulphate reduction and calculate that in the top 6 centimetres, up to 92 % of sulphide produced during sulphate reduction was reoxidised. The rates decreased steeply with depth, however, and sulphide oxidation to sulphate could no longer be quantified 10 cm below the seafloor. Fe oxides were the primary oxidant for sulphide and the sulphide oxidation rate was related to the amount and reactivity of the Fe minerals. These results provide important insights into the magnitude and processes of the sulphur cycle in marine sediments.

Description: Mantle convection is the principal mechanism by which heat is transferred from the deep Earth to the surface. Cold subducting slabs sink into the mantle and steadily warm, whilst upwelling plumes carry heat to the base of lithospheric plates where it can subsequently escape by conduction. Accurate estimation of the total heat carried by these plumes is important for understanding geodynamic processes and Earth's thermal budget. Existing estimates, based upon swell geometries and velocities of overriding plates, yield a global heat flux of ∼2 TW and indicate that plumes play only a minor role in heat transfer. Here, we revisit the Icelandic and Hawaiian plumes to show that their individual flux estimates are likely to be incorrect due to the assumption that buoyancy is mainly produced within the lithosphere and therefore translates at plate velocities. We develop an alternative methodology that depends upon swell volume, is independent of plate velocities, and allows both for decay of buoyancy through time and for differential motion between asthenospheric buoyancy and the overlying plate. Reanalysis of the Icelandic and Hawaiian swells yields buoyancy fluxes of Mg s−1 and Mg s−1, respectively. Both swells are used to calibrate a buoyancy decay timescale of ∼45 Myr for the new volumetric approach, which enables buoyancy fluxes to be estimated for a global inventory of 53 swells. Estimates from magmatic hotspots yield a cumulative lower bound on global plume flux of 2 TW, which increases to 6 TW if amagmatic swells are also included and if all buoyancy is assumed to be thermal in origin. Our results suggest that upwelling plumes play a significant role in the transfer of heat into the uppermost mantle.

Description: Continental shelves in arid tropical settings present particular challenges to 210Pb-based analysis of sedimentation rates and surface mixing owing to the combination of coarse sediment, deep and year-round bioturbation, and lower atmospheric flux of 210Pb. The modern continental shelf at the northern terminus of the hyper-arid Gulf of Eilat/Aqaba (GOE) receives flood-runoff of siliciclastics, producing a mixed seabed with ~20% carbonate that is dominated by larger benthic foraminifera and mollusks. Focusing analysis on only the fine-fraction of deep-penetrating cores (≥70 cm) from 15 to 40 m water depths yields reliable 210Pb profiles, in contrast to analysis of bulk sediment (graphical abstract). Sedimentation rates increase offshore five-fold, from 0.01–0.04 cm/y in 15 m water depth to 0.21–0.27 cm/y in 30–40 m depths, reflecting offshore redistribution of flood-delivered siliciclastic sediments away from the wadi mouth, a result also supported by an offshore increase in the inventory of excess 210Pb. In contrast, the thickness of the surface mixed layer (SML) decreases from 〉30 cm to ~20 cm with proximity to anthropogenic stressors (channelized flood runoff, historic release of sewage and operation of fish cages), which we attribute to the suppression of macrobenthic burrowers. The rate of sedimentation on the Gulf shelf –away from dynamic bypassing in the 15 m shoreface – is comparable to other tropical carbonate shelves rich in large benthic foraminifera, and is higher than rates documented on the adjacent slope, increasing confidence in this approach to 210Pb analysis using only the fine fraction. Analysis of the fine fraction rather than bulk sediment would be a useful adjustment to 210Pb methodology in any area with scarce fine-grained sediment.

Description: Deep-water volcanoes are emplaced in water depths 〉1.0 km and are widespread along continental margins and in ocean basins. Whilst the external morphology of deep-water volcanoes can be mapped using bathymetric surveys, their internal structure and true volume remain enigmatic. It is thus difficult to determine how deep-water volcanoes grow. We investigate 13 Late Miocene-to-Quaternary, deep-water volcanoes that are imaged in 3D by seismic reflection data from the northern South China Sea, which allow us to quantify their external morphology and examine their internal structure. These deep-water volcanoes were emplaced in water depths 〉1.5 km, are relatively small (〈3.0 km diameter, 〈0.56 km tall, and 〈0.92 km3 in volume), and have steep slopes (up to 42°). Most of the volcanoes have erosional, ‘crater-like’ bases, infilled with sub-horizontal seismic reflections. These crater-like bases are overlain by downward-converging, conical seismic reflections delineating the classical volcano morphology. We suggest the crater-like bases formed by excavation of cold, wet, and poorly consolidated near-seabed sediment during expulsion of hydrothermal fluid, and not by explosive magmatic eruptions or gravitational subsidence. Erupted igneous material infilled the precursor craters with the observed sub-horizontal layers, likely comprising hyaloclastites. After this initial phase of volcanism, the buildup of volcanic material produced layers that are now represented by the flank-parallel or downward-converging, conical seismic reflections. We suggest high hydrostatic pressures of 〉15 MPa, which are typical of water depths 〉1.5 km, inhibited degassing and fragmentation of ascending magma and thus erupted lava. This lack of degassing and fragmentation permitted effusive eruptions during the latter stages of volcanism. Our models for volcano growth in the deep submarine realm demonstrate the power of using 3D seismic data when investigating the internal structure and total volume of deep-water volcanoes.

Description: Arctic fjord sediments of Svalbard receive terrestrial material from glacial runoff and organic matter from marine primary productivity. Organic carbon mineralization proceeds primarily through sulfate and iron reduction in the fjord sediment. The ongoing retreat of glaciers in the high Arctic is altering the input of glacial material to the fjords, with unknown consequences for the iron and sulfur cycles in the fjord sediments. We measured sulfate reduction rates in sediment cores and analyzed porewater geochemistry, then compared these results to long-term sediment incubations to determine the rates of iron reduction and sulfide oxidation in three glacially influenced fjords on the west coast of Spitsbergen, Svalbard. Despite an abundance of glacially-sourced Fe(III)-oxide minerals, active sulfate reduction took place throughout the sediment. Analyses of the sulfur and oxygen isotopic composition of porewater sulfate and sulfate concentrations suggest that sulfide produced from biological sulfate reduction is reoxidized to sulfate. Long-term sediment incubations indicated sulfide oxidation at all three stations. The rate of sulfide oxidation was controlled by both the rate of sulfate reduction and the quantity and reactivity of Fe(III)-oxides. In our experimental incubations, we detected a decrease in Fe(III) content of the 0.5 M HCl and ascorbate-extractable fractions, but not in the 6 M HCl fraction, indicating that the highly reactive Fe(III) fraction is utilized by microorganisms and serves as the oxidant for sulfide oxidation. Our results show that sulfide oxidation in glacially-influenced fjord sediments is a wide-spread geochemical process. Further warming will drive glacial retreat onto land, where sediment-laden glacial meltwater will be altered during flow through proglacial streams and lakes before entering the marine environment. Fjord sediments will likely become more sulfidic, as glaciers deliver less particulate, highly-reactive metal oxides to the marine environment.

Description: Highlights • Nd isotope data reflect advection and dilution of Mediterranean Outflow Water on its way north in the Bay of Biscay. • Combined Hf and Nd isotopes are a sensitive indicator of inputs from land as well as long distance advection and mixing. • Nd isotope results of this and earlier studies demonstrate the temporally variable flow path of Mediterranean Sea Water. We present dissolved neodymium and hafnium concentrations and isotope compositions of surface and deep-water masses from the Bay of Biscay. Neodymium isotope signatures in surface waters of the Bay of Biscay are mostly dominated by local weathering inputs from the surrounding continental margin. Subsurface Eastern North Atlantic Central Water (ENACW) shows a distinct Nd isotope signature (εNd ≅ −12) at the southwestern-most station and is significantly diluted by mixing with more radiogenic waters or shifted by inputs of relatively radiogenic particulate Nd on its way north along the European margin. Furthermore, the Nd isotope data clearly show a declining fraction of Mediterranean Sea Water (MSW) at intermediate depths on its way north indicating that only 40% to 60% of MSW still present in the mixture at the Galician margin arrive at the stations further north in the Bay of Biscay. An interannual variability of the flow path of MSW is identified when comparing the results of the Nd isotope compositions and salinity data of this study with those of earlier studies from the area. In agreement with Nd isotope and concentration analyses the Hf isotope composition of MSW is set by large-scale inputs of terrigenous material into the Mediterranean as can be deduced from elevated Hf concentrations still observable at the Galician margin. Hf isotope signatures of all water masses of the Bay of Biscay, moreover, are overprinted by local weathering inputs and do not reflect water mass mixing. However, combined dissolved Nd and Hf isotopes serve as indicators of local weathering influences on signatures expected from long distance water mass mixing.

Description: Highlights: • Feeding overlap was highly expressed between native and non-native oyster. • Differences were recorded in zooplankton but not in phytoplankton consumption. • O. edulis larvae in C. gigas stomach content was confirmed by DNA analysis. • O. edulis had broader isotopic niche than C. gigas. Abstract: In order to detect the possible regulatory effect of non-native C. gigas on the native O. edulis, under aquaculture conditions, feeding interactions between them were investigated in a highly productive environment of Lim Bay (Adriatic Sea). The present study uses a multi-methodological approach, including stomach content, DNA barcoding and stable isotope analysis to elucidate the feeding ecology of two oyster species. The research confirmed a high overlap throughout the year in the feeding traits among native and non-native oyster species. Competition for food was not the only relationship that exists between the investigated species as the presence of O. edulis larvae in C. gigas stomach content was confirmed by DNA analysis. Findings are not in favour of introducing C. gigas to commercial aquaculture in any new areas in the Adriatic Sea and support the need to improve the existing O. edulis aquaculture and conserve its wild stocks.