ALBERT

Description: Remote Sensing, Vol. 10, Pages 1171: Multi-Criteria Evaluation of Snowpack Simulations in Complex Alpine Terrain Using Satellite and In Situ Observations Remote Sensing doi: 10.3390/rs10081171 Authors: Jesús Revuelto Grégoire Lecourt Matthieu Lafaysse Isabella Zin Luc Charrois Vincent Vionnet Marie Dumont Antoine Rabatel Delphine Six Thomas Condom Samuel Morin Alessandra Viani Pascal Sirguey This work presents an extensive evaluation of the Crocus snowpack model over a rugged and highly glacierized mountain catchment (Arve valley, Western Alps, France) from 1989 to 2015. The simulations were compared and evaluated using in-situ point snow depth measurements, in-situ seasonal and annual glacier surface mass balance, snow covered area evolution based on optical satellite imagery at 250 m resolution (MODIS sensor), and the annual equilibrium-line altitude of glaciers, derived from satellite images (Landsat, SPOT, and ASTER). The snowpack simulations were obtained using the Crocus snowpack model driven by the same, originally semi-distributed, meteorological forcing (SAFRAN) reanalysis using the native semi-distributed configuration, but also a fully distributed configuration. The semi-distributed approach addresses land surface simulations for discrete topographic classes characterized by elevation range, aspect, and slope. The distributed approach operates on a 250-m grid, enabling inclusion of terrain shadowing effects, based on the same original meteorological dataset. Despite the fact that the two simulations use the same snowpack model, being potentially subjected to same potential deviation from the parametrization of certain physical processes, the results showed that both approaches accurately reproduced the snowpack distribution over the study period. Slightly (although statistically significantly) better results were obtained by using the distributed approach. The evaluation of the snow cover area with MODIS sensor has shown, on average, a reduction of the Root Mean Squared Error (RMSE) from 15.2% with the semi-distributed approach to 12.6% with the distributed one. Similarly, surface glacier mass balance RMSE decreased from 1.475 m of water equivalent (W.E.) for the semi-distributed simulation to 1.375 m W.E. for the distribution. The improvement, observed with a much higher computational time, does not justify the recommendation of this approach for all applications; however, for simulations that require a precise representation of snowpack distribution, the distributed approach is suggested.

Description: Remote Sensing, Vol. 10, Pages 1169: Multi-Year Analyses of Columnar Aerosol Optical and Microphysical Properties in Xi’an, a Megacity in Northwestern China Remote Sensing doi: 10.3390/rs10081169 Authors: Xiaoli Su Junji Cao Zhengqiang Li Kaitao Li Hua Xu Suixin Liu Xuehua Fan A thorough understanding of aerosol optical properties and their spatio-temporal variability are required to accurately evaluate aerosol effects in the climate system. In this study, a multi-year study of aerosol optical and microphysical properties was firstly performed in Xi’an based on three years of sun photometer remote sensing measurements from 2012 to 2015. The multi-year average of aerosol optical depth (AOD) at 440 nm was about 0.88 ± 0.24 (mean ± SD), while the averaged Ångström Exponent (AE) between 440 and 870 nm was 1.02 ± 0.15. The mean value of single scattering albedo (SSA) was around 0.89 ± 0.03. Aerosol optical depth and AE showed different seasonal variation patterns. Aerosol optical depth was slightly higher in winter (0.99 ± 0.36) than in other seasons (~0.85 ± 0.20), while AE showed its minimum in spring (0.85 ± 0.05) due to the impact of dust episodes. The seasonal variations of volume particle size distribution, spectral refractive index, SSA, and asymmetry factor were also analyzed to characterize aerosols over this region. Based on the aerosol products derived from sun photometer measurements, the classification of aerosol types was also conducted using two different methods in this region. Results show that the dominant aerosol types are absorbers in all seasons, especially in winter, demonstrating the strong absorptivity of aerosols in Xi’an.

Description: Remote Sensing, Vol. 10, Pages 1166: Inventory of Glaciers in the Shaksgam Valley of the Chinese Karakoram Mountains, 1970–2014 Remote Sensing doi: 10.3390/rs10081166 Authors: Haireti Alifu Yukiko Hirabayashi Brian Alan Johnson Jean-Francois Vuillaume Akihiko Kondoh Minoru Urai The Shaksgam Valley, located on the north side of the Karakoram Mountains of western China, is situated in the transition zone between the Indian monsoon system and dry arid climate zones. Previous studies have reported abnormal behaviors of the glaciers in this region compared to the global trend of glacier retreat, so the region is of special interest for glacier-climatological studies. For this purpose, long-term monitoring of glaciers in this region is necessary to obtain a better understanding of the relationships between glacier changes and local climate variations. However, accurate historical and up-to-date glacier inventory data for the region are currently unavailable. For this reason, this study conducted glacier inventories for the years 1970, 1980, 1990, 2000 and 2014 (i.e., a ~10-year interval) using multi-temporal remote sensing imagery. The remote sensing data used included Corona KH-4A/B (1965–1971), Hexagon KH-9 (1980), Landsat Thematic Mapper (TM) (1990/1993), Landsat Enhanced Thematic Mapper Plus (ETM+) (2000/2001), and Landsat Operational Land Imager (OLI) and Thermal Infrared Sensor (TIRS) (2014/2015) multispectral satellite images, as well as digital elevation models (DEMs) from the Shuttle Radar Topography Mission (SRTM), DEMs generated from Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) images (2005–2014), and Advanced Land Observing Satellite (ALOS) World 3D 30 m mesh (AW3D30). In the year 2014, a total of 173 glaciers (including 121 debris-free glaciers) (>0.5 km2), covering an area of 1478 ± 34 km2 (area of debris-free glaciers: 295 ± 7 km2) were mapped. The multi-temporal glacier inventory results indicated that total glacier area change between 1970–2014 was not significant. However, individual glacier changes showed significant variability. Comparisons of the changes in glacier terminus position indicated that 55 (32 debris-covered) glaciers experienced significant advances (~40–1400 m) between 1970–2014, and 74 (32 debris-covered) glaciers experienced significant advances (~40–1400 m) during the most recent period (2000–2014). Notably, small glaciers showed higher sensitivity to climate changes, and the glaciers located in the western part of the study site were exhibiting glacier area expansion compared to other parts of the Shaksgam Valley. Finally, regression analyses indicated that topographic parameters were not the main driver of glacier changes. On the contrary, local climate variability could explain the complex behavior of glaciers in this region.

Description: Remote Sensing, Vol. 10, Pages 1181: Improved Albedo Estimates Implemented in the METRIC Model for Modeling Energy Balance Fluxes and Evapotranspiration over Agricultural and Natural Areas in the Brazilian Cerrado Remote Sensing doi: 10.3390/rs10081181 Authors: Bruno Silva Oliveira Elisabete Caria Moraes Marcos Carrasco-Benavides Gabriel Bertani Guilherme Augusto Verola Mataveli In this study we assessed METRIC (Mapping Evapotranspiration at high Resolution with Internalized Calibration) model performance to estimate energy balance fluxes and evapotranspiration (ET) in two heterogeneous landscapes in the Brazilian Cerrado, including fluxes and ET in both agricultural and natural vegetation. The estimates were evaluated by comparing them to flux tower data collected over sugarcane (USR site), woody savanna (PDG site) and stricto-sensu savanna (RECOR site) areas. The selection of the study years (2005–2007 for USR/PDG sites and 2011–2015 for RECOR site) was based on the availability of meteorological data (to be used as inputs in METRIC) and of flux tower data for energy balance fluxes and ET comparisons. The broadband albedo submodel was adjusted in order to improve Net Radiation estimates. For this adjustment, we applied at-surface solar radiation simulations obtained from the SMARTS2 model under different conditions of land elevation, precipitable water content and solar angles. We also tested the equivalence between the measured crop coefficient (Kc_ec) and the reference evapotranspiration fraction (ETrF or F), seeking to extrapolate from instantaneous to daily values of actual evapotranspiration (ETa). Surface albedo was underestimated by 10% at the USR site (showing a better performance for full crop coverage), by 15% at the PDG site (following the woody savanna dynamics pattern through dry and wet seasons) and was overestimated by 21% at the RECOR site. METRIC was effective in simulating the spatial and temporal variability of energy balance fluxes and ET over agricultural and natural vegetation in the Brazilian Cerrado, with errors within those reported in the literature. Net radiation (Rn) presented consistent results (coefficient of determination (R2) > 0.94) but it was overestimated by 8% and 9% in sugarcane and woody savanna, respectively. METRIC-derived ET estimates showed an agreement with ground data at USR and PDG sites (R2 > 0.88, root mean square error (RMSE) up to 0.87 mm day−1), but at the RECOR site, ET was overestimated by 14% (R2 = 0.96, mean absolute error (MAE) = 0.62 mm.day−1 and RMSE = 0.75 mm day−1). Surface energy balance fluxes and ET were marked by seasonality, with direct dependence on available energy, rainfall distribution, soil moisture and other parameters like albedo and NDVI.

Description: Remote Sensing, Vol. 10, Pages 1182: Detection of Frozen Soil Using Sentinel-1 SAR Data Remote Sensing doi: 10.3390/rs10081182 Authors: Nicolas Baghdadi Hassan Bazzi Mohammad El Hajj Mehrez Zribi The objective of this paper is to evaluate the potential of Sentinel-1 Synthetic Aperture Radar “SAR” data (C-band) for monitoring agricultural frozen soils. First, investigations were conducted from simulated radar signal data using a SAR backscattering model combined with a dielectric mixing model. Then, Sentinel-1 images acquired at a study site near Paris, France were analyzed using temperature data to investigate the potential of the new Sentinel-1 SAR sensor for frozen soil mapping. The results show that the SAR backscattering coefficient decreases when the soil temperature drops below 0 °C. This decrease in signal is the most important for temperatures that ranges between 0 and −5 °C. A difference of at least 2 dB is observed between unfrozen soils and frozen soils. This difference increases under freezing condition when the temperature at the image acquisition date decreases. In addition, results show that the potential of the C-band radar signal for the discrimination of frozen soils slightly decreases when the soil moisture decreases (simulated data were used with soil moisture contents of 20 and 30 vol%). The difference between the backscattering coefficient of unfrozen soil and the backscattering coefficient of frozen soil decreases by approximately 1 dB when the soil moisture decreases from 30 to 20 vol%). Finally, the results show that both VV and VH allow a good detection of frozen soils but the sensitivity of VH is higher by approximately 1.5 dB. In conclusion, this study shows that the difference between a reference image acquired without freezing and an image acquired under freezing conditions is a good tool for detecting frozen soils.

Description: Algorithms, Vol. 11, Pages 112: A Novel Parallel Auto-Encoder Framework for Multi-Scale Data in Civil Structural Health Monitoring Algorithms doi: 10.3390/a11080112 Authors: Ruhua Wang Ling Li Jun Li In this paper, damage detection/identification for a seven-storey steel structure is investigated via using the vibration signals and deep learning techniques. Vibration characteristics, such as natural frequencies and mode shapes are captured and utilized as input for a deep learning network while the output vector represents the structural damage associated with locations. The deep auto-encoder with sparsity constraint is used for effective feature extraction for different types of signals and another deep auto-encoder is used to learn the relationship of different signals for final regression. The existing SAF model in a recent research study for the same problem processed all signals in one serial auto-encoder model. That kind of models have the following difficulties: (1) the natural frequencies and mode shapes are in different magnitude scales and it is not logical to normalize them in the same scale in building the models with training samples; (2) some frequencies and mode shapes may not be related to each other and it is not fair to use them for dimension reduction together. To tackle the above-mentioned problems for the multi-scale dataset in SHM, a novel parallel auto-encoder framework (Para-AF) is proposed in this paper. It processes the frequency signals and mode shapes separately for feature selection via dimension reduction and then combine these features together in relationship learning for regression. Furthermore, we introduce sparsity constraint in model reduction stage for performance improvement. Two experiments are conducted on performance evaluation and our results show the significant advantages of the proposed model in comparison with the existing approaches.

Description: Algorithms, Vol. 11, Pages 113: Improved Parameter Identification Method for Envelope Current Signals Based on Windowed Interpolation FFT and DE Algorithm Algorithms doi: 10.3390/a11080113 Authors: Xiangfeng Su Huaiqing Zhang Lin Chen Ling Qin Lili Yu Envelope current signals are increasingly emerging in power systems, and their parameter identification is particularly necessary for accurate measurement of electrical energy. In order to analyze the envelope current signal, the harmonic parameters, as well as the envelope parameters, need to be calculated. The interpolation fast Fourier transform (FFT) is a widely used approach which can estimate the signal frequency with high precision, but it cannot calculate the envelope parameters of the signal. Therefore, this paper proposes an improved method based on windowed interpolation FFT (WIFFT) and differential evolution (DE). The amplitude and phase parameters obtained through WIFFT and the envelope parameters estimated by the envelope analysis are optimized using the DE algorithm, which makes full use of the performance advantage of DE. The simulation results show that the proposed method can improve the accuracy of the harmonic parameters and the envelope parameter significantly. In addition, it has good anti-noise ability and high precision.

Description: Remote Sensing, Vol. 10, Pages 1186: Application of Multi-Sensor Satellite Data for Exploration of Zn–Pb Sulfide Mineralization in the Franklinian Basin, North Greenland Remote Sensing doi: 10.3390/rs10081186 Authors: Amin Beiranvand Pour Tae-Yoon S. Park Yongcheol Park Jong Kuk Hong Basem Zoheir Biswajeet Pradhan Iman Ayoobi Mazlan Hashim Geological mapping and mineral exploration programs in the High Arctic have been naturally hindered by its remoteness and hostile climate conditions. The Franklinian Basin in North Greenland has a unique potential for exploration of world-class zinc deposits. In this research, multi-sensor remote sensing satellite data (e.g., Landsat-8, Phased Array L-band Synthetic Aperture Radar (PALSAR) and Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER)) were used for exploring zinc in the trough sequences and shelf-platform carbonate of the Franklinian Basin. A series of robust image processing algorithms was implemented for detecting spatial distribution of pixels/sub-pixels related to key alteration mineral assemblages and structural features that may represent potential undiscovered Zn–Pb deposits. Fusion of Directed Principal Component Analysis (DPCA) and Independent Component Analysis (ICA) was applied to some selected Landsat-8 mineral indices for mapping gossan, clay-rich zones and dolomitization. Major lineaments, intersections, curvilinear structures and sedimentary formations were traced by the application of Feature-oriented Principal Components Selection (FPCS) to cross-polarized backscatter PALSAR ratio images. Mixture Tuned Matched Filtering (MTMF) algorithm was applied to ASTER VNIR/SWIR bands for sub-pixel detection and classification of hematite, goethite, jarosite, alunite, gypsum, chalcedony, kaolinite, muscovite, chlorite, epidote, calcite and dolomite in the prospective targets. Using the remote sensing data and approaches, several high potential zones characterized by distinct alteration mineral assemblages and structural fabrics were identified that could represent undiscovered Zn–Pb sulfide deposits in the study area. This research establishes a straightforward/cost-effective multi-sensor satellite-based remote sensing approach for reconnaissance stages of mineral exploration in hardly accessible parts of the High Arctic environments.

Description: Remote Sensing, Vol. 10, Pages 1184: An Evaluation of Forest Health Insect and Disease Survey Data and Satellite-Based Remote Sensing Forest Change Detection Methods: Case Studies in the United States Remote Sensing doi: 10.3390/rs10081184 Authors: Ian W. Housman Robert A. Chastain Mark V. Finco The Operational Remote Sensing (ORS) program leverages Landsat and MODIS data to detect forest disturbances across the conterminous United States (CONUS). The ORS program was initiated in 2014 as a collaboration between the US Department of Agriculture Forest Service Geospatial Technology and Applications Center (GTAC) and the Forest Health Assessment and Applied Sciences Team (FHAAST). The goal of the ORS program is to supplement the Insect and Disease Survey (IDS) and MODIS Real-Time Forest Disturbance (RTFD) programs with imagery-derived forest disturbance data that can be used to augment traditional IDS data. We developed three algorithms and produced ORS forest change products using both Landsat and MODIS data. These were assessed over Southern New England and the Rio Grande National Forest. Reference data were acquired using TimeSync to conduct an independent accuracy assessment of IDS, RTFD, and ORS products. Overall accuracy for all products ranged from 71.63% to 92.55% in the Southern New England study area and 63.48% to 79.13% in the Rio Grande National Forest study area. While the accuracies attained from the assessed products are somewhat low, these results are similar to comparable studies. Although many ORS products met or exceeded the overall accuracy of IDS and RTFD products, the differences were largely statistically insignificant at the 95% confidence interval. This demonstrates the current implementation of ORS is sufficient to provide data to augment IDS data.

Description: Algorithms, Vol. 11, Pages 114: Revisiting Chameleon Sequences in the Protein Data Bank Algorithms doi: 10.3390/a11080114 Authors: Mihaly Mezei The steady growth of the Protein Data Bank (PDB) suggests the periodic repetition of searches for sequences that form different secondary structures in different protein structures; these are called chameleon sequences. This paper presents a fast (nlog(n)) algorithm for such searches and presents the results on all protein structures in the PDB. The longest such sequence found consists of 20 residues.

Description: Algorithms, Vol. 11, Pages 115: Color-Based Image Retrieval Using Proximity Space Theory Algorithms doi: 10.3390/a11080115 Authors: Jing Wang Lidong Wang Xiaodong Liu Yan Ren Ye Yuan The goal of object retrieval is to rank a set of images by their similarity compared with a query image. Nowadays, content-based image retrieval is a hot research topic, and color features play an important role in this procedure. However, it is important to establish a measure of image similarity in advance. The innovation point of this paper lies in the following. Firstly, the idea of the proximity space theory is utilized to retrieve the relevant images between the query image and images of database, and we use the color histogram of an image to obtain the Top-ranked colors, which can be regard as the object set. Secondly, the similarity is calculated based on an improved dominance granule structure similarity method. Thus, we propose a color-based image retrieval method by using proximity space theory. To detect the feasibility of this method, we conducted an experiment on COIL-20 image database and Corel-1000 database. Experimental results demonstrate the effectiveness of the proposed framework and its applications.

Description: Future Internet, Vol. 10, Pages 71: Hybrid Approach with Improved Genetic Algorithm and Simulated Annealing for Thesis Sampling Future Internet doi: 10.3390/fi10080071 Authors: Shardrom Johnson Jinwu Han Yuanchen Liu Li Chen Xinlin Wu Sampling inspection uses the sample characteristics to estimate that of the population, and it is an important method to describe the population, which has the features of low cost, strong applicability and high scientificity. This paper aims at the sampling inspection of the master’s degree thesis to ensure their quality, which is commonly estimated by random sampling. Since there are disadvantages in random sampling, a hybrid algorithm combined with an improved genetic algorithm and a simulated annealing algorithm is proposed in this paper. Furthermore, a novel mutation strategy is introduced according to the specialty of Shanghai’s thesis sampling to improve the efficiency of sampling inspection; the acceleration of convergence of the algorithm can also take advantage of this. The new algorithm features the traditional genetic algorithm, and it can obtain the global optimum in the optimization process and provide the fairest sampling plan under the constraint of multiple sampling indexes. The experimental results on the master’s thesis dataset of Shanghai show that the proposed algorithm well meets the requirements of the sampling inspection in Shanghai with a lower time-complexity.

Description: Future Internet, Vol. 10, Pages 70: Multidiscipline Integrated Platform Based on Probabilistic Analysis for Manufacturing Engineering Processes Future Internet doi: 10.3390/fi10080070 Authors: Lijun Zhang Kai Liu Jian Liu Researchers from different disciplines, such as materials science, computer science, safety science, mechanical engineering and controlling engineering, have aimed to improve the quality of manufacturing engineering processes. Considering the requirements of research and development of advanced materials, reliable manufacturing and collaborative innovation, a multidiscipline integrated platform framework based on probabilistic analysis for manufacturing engineering processes is proposed. The proposed platform consists of three logical layers: The requirement layer, the database layer and the application layer. The platform is intended to be a scalable system to gradually supplement related data, models and approaches. The main key technologies of the platform, encapsulation methods, information fusion approaches and the collaborative mechanism are also discussed. The proposed platform will also be gradually improved in the future. In order to exchange information for manufacturing engineering processes, scientists and engineers of different institutes of materials science and manufacturing engineering should strengthen their cooperation.

Description: Remote Sensing, Vol. 10, Pages 1196: Evaluating the Best Spectral Indices for the Detection of Burn Scars at Several Post-Fire Dates in a Mountainous Region of Northwest Yunnan, China Remote Sensing doi: 10.3390/rs10081196 Authors: Davide Fornacca Guopeng Ren Wen Xiao Remote mountainous regions are among the Earth’s last remaining wild spots, hosting rare ecosystems and rich biodiversity. Because of access difficulties and low population density, baseline information about natural and human-induced disturbances in these regions is often limited or nonexistent. Landsat time series offer invaluable opportunities to reconstruct past land cover changes. However, the applicability of this approach strongly depends on the availability of good quality, cloud-free images, acquired at a regular time interval, which in mountainous regions are often difficult to find. The present study analyzed burn scar detection capabilities of 11 widely used spectral indices (SI) at 1 to 5 years after fire events in four dominant vegetation groups in a mountainous region of northwest Yunnan, China. To evaluate their performances, we used M-statistic as a burned-unburned class separability index, and we adapted an existing metric to quantify the SI residual burn signal at post-fire dates compared to the maximum severity recorded soon after the fire. Our results show that Normalized Burn Ratio (NBR) and Normalized Difference Moisture Index (NDMI) are always among the three best performers for the detection of burn scars starting 1 year after fire but not for the immediate post-fire assessment, where the Mid Infrared Burn Index, Burn Area Index, and Tasseled Cap Greenness were superior. Brightness and Wetness peculiar patterns revealed long-term effects of fire in vegetated land, suggesting their potential integration to assist other SI in burned area detection several years after the fire event. However, in general, class separability of most of the SI was poor after one growing season, due to the seasonal rains and the relatively fast regrowth rate of shrubs and grasses, confirming the difficulty of assessment in mountainous ecosystems. Our findings are meaningful for the selection of a suitable SI to integrate in burned area detection workflows, according to vegetation type and time lag between image acquisitions.

Description: Remote Sensing, Vol. 10, Pages 1192: Automating Parameter Learning for Classifying Terrestrial LiDAR Point Cloud Using 2D Land Cover Maps Remote Sensing doi: 10.3390/rs10081192 Authors: Chen-Chieh Feng Zhou Guo The automating classification of point clouds capturing urban scenes is critical for supporting applications that demand three-dimensional (3D) models. Achieving this goal, however, is met with challenges because of the varying densities of the point clouds and the complexity of the 3D data. In order to increase the level of automation in the point cloud classification, this study proposes a segment-based parameter learning method that incorporates a two-dimensional (2D) land cover map, in which a strategy of fusing the 2D land cover map and the 3D points is first adopted to create labelled samples, and a formalized procedure is then implemented to automatically learn the following parameters of point cloud classification: the optimal scale of the neighborhood for segmentation, optimal feature set, and the training classifier. It comprises four main steps, namely: (1) point cloud segmentation; (2) sample selection; (3) optimal feature set selection; and (4) point cloud classification. Three datasets containing the point cloud data were used in this study to validate the efficiency of the proposed method. The first two datasets cover two areas of the National University of Singapore (NUS) campus while the third dataset is a widely used benchmark point cloud dataset of Oakland, Pennsylvania. The classification parameters were learned from the first dataset consisting of a terrestrial laser-scanning data and a 2D land cover map, and were subsequently used to classify both of the NUS datasets. The evaluation of the classification results showed overall accuracies of 94.07% and 91.13%, respectively, indicating that the transition of the knowledge learned from one dataset to another was satisfactory. The classification of the Oakland dataset achieved an overall accuracy of 97.08%, which further verified the transferability of the proposed approach. An experiment of the point-based classification was also conducted on the first dataset and the result was compared to that of the segment-based classification. The evaluation revealed that the overall accuracy of the segment-based classification is indeed higher than that of the point-based classification, demonstrating the advantage of the segment-based approaches.

Description: Remote Sensing, Vol. 10, Pages 1197: Quantifying Drought Propagation from Soil Moisture to Vegetation Dynamics Using a Newly Developed Ecohydrological Land Reanalysis Remote Sensing doi: 10.3390/rs10081197 Authors: Yohei Sawada Despite the importance of the interaction between soil moisture and vegetation dynamics to understand the complex nature of drought, few land reanalyses explicitly simulate vegetation growth and senescence. In this study, I provide a new land reanalysis which explicitly simulates the interaction between sub-surface soil moisture and vegetation dynamics by the sequential assimilation of satellite microwave brightness temperature observations into a land surface model (LSM). Assimilating satellite microwave brightness temperature observations improves the skill of a LSM to simultaneously simulate soil moisture and the seasonal cycle of leaf area index (LAI). By analyzing soil moisture and LAI simulated by this new land reanalysis, I identify the drought events which significantly damage LAI on the climatological day-of-year of the LAI’s seasonal peak and quantify drought propagation from soil moisture to LAI in the global snow-free region. On average, soil moisture in the shallow soil layers (0–0.45 m) quickly recovers from the drought condition before the climatological day-of-year of the LAI’s seasonal peak while soil moisture in the deeper soil layer (1.05–2.05 m) and LAI recover from the drought condition approximately 100 days after the climatological day-of-year of the LAI’s seasonal peak.

Description: Future Internet, Vol. 10, Pages 72: Context Analysis of Cloud Computing Systems Using a Pattern-Based Approach Future Internet doi: 10.3390/fi10080072 Authors: Ludger Goeke Nazila Gol Mohammadi Maritta Heisel Cloud computing services bring new capabilities for hosting and offering complex collaborative business operations. However, these advances might bring undesirable side-effects, e.g., introducing new vulnerabilities and threats caused by collaboration and data exchange over the Internet. Hence, users have become more concerned about security and privacy aspects. For secure provisioning of a cloud computing service, security and privacy issues must be addressed by using a risk assessment method. To perform a risk assessment, it is necessary to obtain all relevant information about the context of the considered cloud computing service. The context analysis of a cloud computing service and its underlying system is a difficult task because of the variety of different types of information that have to be considered. This context information includes (i) legal, regulatory and/or contractual requirements that are relevant for a cloud computing service (indirect stakeholders); (ii) relations to other involved cloud computing services; (iii) high-level cloud system components that support the involved cloud computing services; (iv) data that is processed by the cloud computing services; and (v) stakeholders that interact directly with the cloud computing services and/or the underlying cloud system components. We present a pattern for the contextual analysis of cloud computing services and demonstrate the instantiation of our proposed pattern with real-life application examples. Our pattern contains elements that represent the above-mentioned types of contextual information. The elements of our pattern conform to the General Data Protection Regulation. Besides the context analysis, our pattern supports the identification of high-level assets. Additionally, our proposed pattern supports the documentation of the scope and boundaries of a cloud computing service conforming to the requirements of the ISO 27005 standard (information security risk management). The results of our context analysis contribute to the transparency of the achieved security and privacy level of a cloud computing service. This transparency can increase the trust of users in a cloud computing service. We present results of the RestAssured project related to the context analysis regarding cloud computing services and their underlying cloud computing systems. The context analysis is the prerequisite to threat and control identification that are performed later in the risk management process. The focus of this paper is the use of a pattern at the time of design systematic context analysis and scope definition for risk management methods.

Description: Algorithms, Vol. 11, Pages 111: A Weighted Histogram-Based Tone Mapping Algorithm for CT Images Algorithms doi: 10.3390/a11080111 Authors: David Völgyes Anne Catrine Trægde Martinsen Arne Stray-Pedersen Dag Waaler Marius Pedersen Computed Tomography (CT) images have a high dynamic range, which makes visualization challenging. Histogram equalization methods either use spatially invariant weights or limited kernel size due to the complexity of pairwise contribution calculation. We present a weighted histogram equalization-based tone mapping algorithm which utilizes Fast Fourier Transform for distance-dependent contribution calculation and distance-based weights. The weights follow power-law without distance-based cut-off. The resulting images have good local contrast without noticeable artefacts. The results are compared to eight popular tone mapping operators.

Description: Remote Sensing, Vol. 10, Pages 1202: Potential of Photochemical Reflectance Index for Indicating Photochemistry and Light Use Efficiency in Leaves of European Beech and Norway Spruce Trees Remote Sensing doi: 10.3390/rs10081202 Authors: Daniel Kováč Petra Veselovská Karel Klem Kristýna Večeřová Alexander Ač Josep Peñuelas Otmar Urban Hyperspectral reflectance is becoming more frequently used for measuring the functions and productivity of ecosystems. The purpose of this study was to re-evaluate the potential of the photochemical reflectance index (PRI) for evaluating physiological status of plants. This is needed because the reasons for variation in PRI and its relationships to physiological traits remain poorly understood. We examined the relationships between PRI and photosynthetic parameters in evergreen Norway spruce and deciduous European beech grown in controlled conditions during several consecutive periods of 10–12 days between which the irradiance and air temperature were changed stepwise. These regime changes induced significant changes in foliar biochemistry and physiology. The responses of PRI corresponded particularly to alterations in the actual quantum yield of photosystem II photochemistry (ΦPSII). Acclimation responses of both species led to loss of PRI sensitivity to light use efficiency (LUE). The procedure of measuring PRI at multiple irradiance-temperature conditions has been designed also for testing accuracy of ΔPRI in estimating LUE. A correction mechanism of subtracting daily measured PRI from early morning PRI has been performed to account for differences in photosynthetic pigments between irradiance-temperature regimes. Introducing ΔPRI, which provided a better estimate of non-photochemical quenching (NPQ) compared to PRI, also improved the accuracy of LUE estimation. Furthermore, ΔPRI was able to detect the effect of drought, which is poorly observable from PRI.

Description: Remote Sensing, Vol. 10, Pages 1200: Mapping up-to-Date Paddy Rice Extent at 10 M Resolution in China through the Integration of Optical and Synthetic Aperture Radar Images Remote Sensing doi: 10.3390/rs10081200 Authors: Xin Zhang Bingfang Wu Guillermo E. Ponce-Campos Miao Zhang Sheng Chang Fuyou Tian Rice is a staple food in East Asia and Southeast Asia—an area that accounts for more than half of the world’s population, and 11% of its cultivated land. Studies on rice monitoring can provide direct or indirect information on food security, and water source management. Remote sensing has proven to be the most effective method for the large-scale monitoring of croplands, by using temporary and spectral information. The Google Earth Engine (GEE) is a cloud-based platform providing access to high-performance computing resources for processing extremely large geospatial datasets. In this study, by leveraging the computational power of GEE and a large pool of satellite and other geophysical data (e.g., forest and water extent maps, with high accuracy at 30 m), we generated the first up-to-date rice extent map with crop intensity, at 10 m resolution in the three provinces with the highest rice production in China (the Heilongjiang, Hunan and Guangxi provinces). Optical and synthetic aperture radar (SAR) data were monthly and metric composited to ensure a sufficient amount of up-to-date data without cloud interference. To remove the common confounding noise in the pixel-based classification results at medium to high resolution, we integrated the pixel-based classification (using a random forest classifier) result with the object-based segmentation (using a simple linear iterative clustering (SLIC) method). This integration resulted in the rice planted area data that most closely resembled official statistics. The overall accuracy was approximately 90%, which was validated by ground crop field points. The F scores reached 87.78% in the Heilongjiang Province for monocropped rice, 89.97% and 80.00% in the Hunan Province for mono- and double-cropped rice, respectively, and 88.24% in the Guangxi Province for double-cropped rice.

Description: Remote Sensing, Vol. 10, Pages 1211: Evaluating Metal Effects on the Reflectance Spectra of Plant Leaves during Different Seasons in Post-Mining Areas, China Remote Sensing doi: 10.3390/rs10081211 Authors: Chao Zhou Shengbo Chen Yuanzhi Zhang Jianhua Zhao Derui Song Dawei Liu This study examined the relationship between the leaf reflectance of different seasons and the concentration of heavy metal elements in leaves, such as Co, Cu, Mo, and Ni in a post-mining area. The reflectance spectra and leaf samples of three typical plants were measured and collected in a whole growth cycle (June, July, August, and September). The Red Edge Position (REP), Readjustment Normalized Difference Vegetation Index (RE-NDVI), and Photochemical Reflectance Index (PRI) were extracted and used to explore its relation with the heavy metals concentrations in leaves between different seasons. The results show that all three Vegetation Indices (VIs) were insensitive indicators for monitoring the metal effects of vegetation in different seasons, which showed similar trends. Based on this, the Continuum Removal Indices (CRIs) were proposed from the continuum removed approach and extended for detecting the effects of heavy metal pollution over a full growth cycle. The relationship between the metal concentrations and CRIs of different plants was respectively analyzed by Stepwise Multiple Linear Regression (SMLR) and Partial Least Squares Regression (PLSR). It is found that a significant correlation exists between the band depth and the concentration of Cu and Ni based on the White birch data sets using the PLSR, resulting in a small deviation from the established relationships. Compared with VIs, the approach of coupling CRIs and multiple regressions was effective for improving the estimation accuracy. The presented study provides a detection model of leaf heavy metals that can be adapted to different growing cycles, even an arbitrary growing cycle.

Description: Remote Sensing, Vol. 10, Pages 1234: HOMPC: A Local Feature Descriptor Based on the Combination of Magnitude and Phase Congruency Information for Multi-Sensor Remote Sensing Images Remote Sensing doi: 10.3390/rs10081234 Authors: Zhitao Fu Qianqing Qin Bin Luo Hong Sun Chun Wu Local region description of multi-sensor images remains a challenging task in remote sensing image analysis and applications due to the non-linear radiation variations between images. This paper presents a novel descriptor based on the combination of the magnitude and phase congruency information of local regions to capture the common features of images with non-linear radiation changes. We first propose oriented phase congruency maps (PCMs) and oriented magnitude binary maps (MBMs) using the multi-oriented phase congruency and magnitude information of log-Gabor filters. The two feature vectors are then quickly constructed based on the convolved PCMs and MBMs. Finally, a dense descriptor named the histograms of oriented magnitude and phase congruency (HOMPC) is developed by combining the histograms of oriented phase congruency (HPC) and the histograms of oriented magnitude (HOM) to capture the structure and shape properties of local regions. HOMPC was evaluated with three datasets composed of multi-sensor remote sensing images obtained from unmanned ground vehicle, unmanned aerial vehicle, and satellite platforms. The descriptor performance was evaluated by recall, precision, F1-measure, and area under the precision-recall curve. The experimental results showed the advantages of the HOM and HPC combination and confirmed that HOMPC is far superior to the current state-of-the-art local feature descriptors.

Description: Remote Sensing, Vol. 10, Pages 1236: Progressive Degradation of an Ice Rumple in the Thwaites Ice Shelf, Antarctica, as Observed from High-Resolution Digital Elevation Models Remote Sensing doi: 10.3390/rs10081236 Authors: Seung Hee Kim Duk-jin Kim Hyun-Cheol Kim Ice rumples are locally-grounded features of flowing ice shelves, elevated tens of meters above the surrounding surface. These features may significantly impact the dynamics of ice-shelf grounding lines, which are strongly related to shelf stability. In this study, we used TanDEM-X data to construct high-resolution DEMs of the Thwaites ice shelf in West Antarctica from 2011 to 2013. We also generated surface deformation maps which allowed us to detect and monitor the elevation changes of an ice rumple that appeared sometime between the observations of a grounding line of the Thwaites glacier using Double-Differential Interferometric SAR (DDInSAR) in 1996 and 2011. The observed degradation of the ice rumple during 2011–2013 may be related to a loss of contact with the underlying bathymetry caused by the thinning of the ice shelf. We subsequently used a viscoelastic deformation model with a finite spherical pressure source to reproduce the surface expression of the ice rumple. Global optimization allowed us to fit the model to the observed deformation map, producing reasonable estimates of the ice thickness at the center of the pressure source. Our conclusion is that combining the use of multiple high-resolution DEMs and the simple viscoelastic deformation model is feasible for observing and understanding the transient nature of small ice rumples, with implications for monitoring ice shelf stability.

Description: Remote Sensing, Vol. 10, Pages 1232: Assessing Coastal SMAP Surface Salinity Accuracy and Its Application to Monitoring Gulf of Maine Circulation Dynamics Remote Sensing doi: 10.3390/rs10081232 Authors: Semyon A. Grodsky Douglas Vandemark Hui Feng Monitoring the cold and productive waters of the Gulf of Maine and their interactions with the nearby northwestern (NW) Atlantic shelf is important but challenging. Although remotely sensed sea surface temperature (SST), ocean color, and sea level have become routine, much of the water exchange physics is reflected in salinity fields. The recent invention of satellite salinity sensors, including the Soil Moisture Active Passive (SMAP) radiometer, opens new prospects in regional shelf studies. However, local sea surface salinity (SSS) retrieval is challenging due to both cold SST limiting salinity sensor sensitivity and proximity to land. For the NW Atlantic, our analysis shows that SMAP SSS is subject to an SST-dependent bias that is negative and amplifies in winter and early spring due to the SST-related drop in SMAP sensor sensitivity. On top of that, SMAP SSS is subject to a land contamination bias. The latter bias becomes noticeable and negative when the antenna land contamination factor (LC) exceeds 0.2%, and attains maximum negative values at LC = 0.4%. Coastward of LC = 0.5%, a significant positive land contamination bias in absolute SMAP SSS is evident. SST and land contamination bias components are seasonally dependent due to seasonal changes in SST/winds and terrestrial microwave properties. Fortunately, it is shown that SSS anomalies computed relative to a satellite SSS climatology can effectively remove such seasonal biases along with the real seasonal cycle. SMAP monthly SSS anomalies have sufficient accuracy and applicability to extend nearer to the coasts. They are used to examine the Gulf of Maine water inflow, which displayed important water intrusions in between Georges Banks and Nova Scotia in the winters of 2016/17 and 2017/18. Water intrusion patterns observed by SMAP are generally consistent with independent measurements from the European Soil Moisture Ocean Salinity (SMOS) mission. Circulation dynamics related to the 2016/2017 period and enhanced wind-driven Scotian Shelf transport into the Gulf of Maine are discussed.

Description: Remote Sensing, Vol. 10, Pages 1230: Assisting Flood Disaster Response with Earth Observation Data and Products: A Critical Assessment Remote Sensing doi: 10.3390/rs10081230 Authors: Guy J-P. Schumann G. Robert Brakenridge Albert J. Kettner Rashid Kashif Emily Niebuhr Floods are among the top-ranking natural disasters in terms of annual cost in insured and uninsured losses. Since high-impact events often cover spatial scales that are beyond traditional regional monitoring operations, remote sensing, in particular from satellites, presents an attractive approach. Since the 1970s, there have been many studies in the scientific literature about mapping and monitoring of floods using data from various sensors onboard different satellites. The field has now matured and hence there is a general consensus among space agencies, numerous organizations, scientists, and end-users to strengthen the support that satellite missions can offer, particularly in assisting flood disaster response activities. This has stimulated more research in this area, and significant progress has been achieved in recent years in fostering our understanding of the ways in which remote sensing can support flood monitoring and assist emergency response activities. This paper reviews the products and services that currently exist to deliver actionable information about an ongoing flood disaster to emergency response operations. It also critically discusses requirements, challenges and perspectives for improving operational assistance during flood disaster using satellite remote sensing products.

Description: Remote Sensing, Vol. 10, Pages 1228: Generic and Automatic Markov Random Field-Based Registration for Multimodal Remote Sensing Image Using Grayscale and Gradient Information Remote Sensing doi: 10.3390/rs10081228 Authors: Li Yan Ziqi Wang Yi Liu Zhiyun Ye The automatic image registration serves as a technical prerequisite for multimodal remote sensing image fusion. Meanwhile, it is also the technical basis for change detection, image stitching and target recognition. The demands of subpixel level registration accuracy can be rarely satisfied with a multimodal image registration method based on feature matching. In light of this, we propose a Generic and automatic Markov Random Field (MRF)-based registration framework of multimodal image using grayscale and gradient information. The proposed approach performs non-rigid registration and formulates an MRF model while grayscale and gradient statistical information of a multimodal image is employed for the evaluation of similarity while the spatial weighting function is optimized simultaneously. Besides, the value space is discretized to improve the convergence speed. The developed automatic approach was validated both qualitatively and quantitatively, demonstrating its potential for a variety of multimodal remote sensing datasets and scenes. As for the registration accuracy, the average target registration error of the proposed framework is less than 1 pixel, while the maximum displacement error is less than 1 pixel. Compared with the polynomial model registration based on manual selection, the registration accuracy has been significantly improved. In the meantime, the proposed approach had the partial applicability for the multimodal image registration of large deformation scenes. It is also proved that the proposed registration framework using grayscale and gradient information outperforms the MRF-based registration using only grayscale information and only gradient information while the proposed registration framework using Gaussian function as spatial weighting function is superior to that using distance inverse weight method.

Description: Algorithms, Vol. 11, Pages 119: An Opportunistic Network Routing Algorithm Based on Cosine Similarity of Data Packets between Nodes Algorithms doi: 10.3390/a11080119 Authors: Yucheng Lin Zhigang Chen Jia Wu Leilei Wang The mobility of nodes leads to dynamic changes in topology structure, which makes the traditional routing algorithms of a wireless network difficult to apply to the opportunistic network. In view of the problems existing in the process of information forwarding, this paper proposed a routing algorithm based on the cosine similarity of data packets between nodes (cosSim). The cosine distance, an algorithm for calculating the similarity between text data, is used to calculate the cosine similarity of data packets between nodes. The data packet set of nodes are expressed in the form of vectors, thereby facilitating the calculation of the similarity between the nodes. Through the definition of the upper and lower thresholds, the similarity between the nodes is filtered according to certain rules, and finally obtains a plurality of relatively reliable transmission paths. Simulation experiments show that compared with the traditional opportunistic network routing algorithm, such as the Spray and Wait (S&W) algorithm and Epidemic algorithm, the cosSim algorithm has a better transmission effect, which can not only improve the delivery ratio, but also reduce the network transmission delay and decline the routing overhead.

Description: Algorithms, Vol. 11, Pages 120: Probabilistic Interval-Valued Hesitant Fuzzy Information Aggregation Operators and Their Application to Multi-Attribute Decision Making Algorithms doi: 10.3390/a11080120 Authors: Wenying Wu Ying Li Zhiwei Ni Feifei Jin Xuhui Zhu Based on the probabilistic interval-valued hesitant fuzzy information aggregation operators, this paper investigates a novel multi-attribute group decision making (MAGDM) model to address the serious loss of information in a hesitant fuzzy information environment. Firstly, the definition of probabilistic interval-valued hesitant fuzzy set will be introduced, and then, using Archimedean norm, some new probabilistic interval-valued hesitant fuzzy operations are defined. Secondly, based on these operations, the generalized probabilistic interval-valued hesitant fuzzy ordered weighted averaging (GPIVHFOWA) operator, and the generalized probabilistic interval-valued hesitant fuzzy ordered weighted geometric (GPIVHFOWG) operator are proposed, and their desirable properties are discussed. We further study their common forms and analyze the relationship among these proposed operators. Finally, a new probabilistic interval-valued hesitant fuzzy MAGDM model is constructed, and the feasibility and effectiveness of the proposed model are verified by using an example of supplier selection.

Description: Remote Sensing, Vol. 10, Pages 1242: Ocean Wave Measurement Using Short-Range K-Band Narrow Beam Continuous Wave Radar Remote Sensing doi: 10.3390/rs10081242 Authors: Jian Cui Ralf Bachmayer Brad deYoung Weimin Huang We describe a technique to measure ocean wave period, height and direction. The technique is based on the characteristics of transmission and backscattering of short-range K-band narrow beam continuous wave radar at the sea surface. The short-range K-band radar transmits and receives continuous signals close to the sea surface at a low-grazing angle. By sensing the motions of a dominant facet at the sea surface that strongly scatters signals back and is located directly in front of the radar, the wave orbital velocity can be measured from the Doppler shift of the received radar signal. The period, height and direction of ocean wave are determined from the relationships among wave orbital velocity, ocean wave characteristics and the Doppler shift. Numerical simulations were performed to validate that the dominant facet exists and ocean waves are measured by sensing its motion. Validation experiments were conducted in a wave tank to verify the feasibility of the proposed ocean wave measurement method. The results of simulations and experiments demonstrate the effectiveness of the short-range K-band narrow beam continuous wave radar for the measurement of ocean waves.

Description: Remote Sensing, Vol. 10, Pages 1241: Troposphere Water Vapour Tomography: A Horizontal Parameterised Approach Remote Sensing doi: 10.3390/rs10081241 Authors: Qingzhi Zhao Yibin Yao Wanqiang Yao Global Navigation Satellite System (GNSS) troposphere tomography has become one of the most cost-effective means to obtain three-dimensional (3-d) image of the tropospheric water vapour field. Traditional methods divide the tomography area into a number of 3-d voxels and assume that the water vapour density at any voxel is a constant during the given period. However, such behaviour breaks the spatial continuity of water vapour density in a horizontal direction and the number of unknown parameters needing to be estimated is very large. This is the focus of the paper, which tries to reconstruct the water vapor field using the tomographic technique without imposing empirical horizontal and vertical constraints. The proposed approach introduces the layered functional model in each layer vertically and only an a priori constraint is imposed for the water vapor information at the location of the radiosonde station. The elevation angle mask of 30° is determined according to the distribution of intersections between the satellite rays and different layers, which avoids the impact of ray bending and the error in slant water vapor (SWV) at low elevation angles on the tomographic result. Additionally, an optimal weighting strategy is applied to the established tomographic model to obtain a reasonable result. The tomographic experiment is performed using Global Positioning System (GPS) data of 12 receivers derived from the Satellite Positioning Reference Station Network (SatRef) in Hong Kong. The quality of the established tomographic model is validated under different weather conditions and compared with the conventional tomography method using 31-day data, respectively. The numerical result shows that the proposed method is applicable and superior to the traditional one. Comparisons of integrated water vapour (IWV) of the proposed method with that derived from radiosonde and European Centre for Medium-Range Weather Forecasts (ECMWF) ERA-Interim data show that the root mean square (RMS)/Bias of their differences are 3.2/−0.8 mm and 3.3/−1.7 mm, respectively, while the values of traditional method are 5.1/−3.9 mm and 6.3/−5.9 mm, respectively. Furthermore, the water vapour density profiles are also compared with radiosonde and ECMWF data, and the values of RMS/Bias error for the proposed method are 0.88/0.06 g/m3 and 0.92/−0.08 g/m3, respectively, while the values of the traditional method are 1.33/0.38 g/m3 and 1.59/0.40 g/m3, respectively.

Description: Remote Sensing, Vol. 10, Pages 1237: Detection of Methane Plumes Using Airborne Midwave Infrared (3–5 µm) Hyperspectral Data Remote Sensing doi: 10.3390/rs10081237 Authors: Rebecca Del’ Papa Moreira Scafutto Carlos Roberto de Souza Filho Methane (CH4) display spectral features in several regions of the infrared range (0.75–14 µm), which can be used for the remote mapping of emission sources through the detection of CH4 plumes from natural seeps and leaks. Applications of hyperspectral remote sensing techniques for the detection of CH4 in the near and shortwave infrared (NIR-SWIR: 0.75–3 µm) and longwave infrared (LWIR: 7–14 µm) have been demonstrated in the literature with multiple sensors and scenarios. However, the acquisition and processing of hyperspectral data in the midwave infrared (MWIR: 3–5 µm) for this application is rather scarce. Here, a controlled field experiment was used to evaluate the potential for CH4 plume detection in the MWIR based on hyperspectral data acquired with the SEBASS airborne sensor. For comparison purposes, LWIR data were also acquired simultaneously with the same instrument. The experiment included surface and undersurface emission sources (ground stations), with flow rates ranging between 0.6–40 m3/h. The data collected in both ranges were sequentially processed using the same methodology. The CH4 plume was detected, variably, in both datasets. The gas plume was detected in all LWIR images acquired over nine gas leakage stations. In the MWIR range, the plume was detected in only four stations, wherein 18 m3/h was the lowest flux sensed. We demonstrate that the interference of target reflectance, the low contrast between plume and background and a low signal of the CH4 feature in the MWIR at ambient conditions possibly explain the inferior results observed for this range when compared to LWIR. Furthermore, we show that the acquisition time and weather conditions, including specific limits of temperature, humidity, and wind speed, proved critical for plume detection using daytime MWIR hyperspectral data.

Description: Remote Sensing, Vol. 10, Pages 1238: Refining Land Cover Classification Maps Based on Dual-Adaptive Majority Voting Strategy for Very High Resolution Remote Sensing Images Remote Sensing doi: 10.3390/rs10081238 Authors: Guoqing Cui Zhiyong Lv Guangfei Li Jón Atli Benediktsson Yudong Lu Land cover classification that uses very high resolution (VHR) remote sensing images is a topic of considerable interest. Although many classification methods have been developed, the accuracy and usability of classification systems can still be improved. In this paper, a novel post-processing approach based on a dual-adaptive majority voting strategy (D-AMVS) is proposed to improve the performance of initial classification maps. D-AMVS defines a strategy for refining each label of a classified map that is obtained by different classification methods from the same original image, and fusing the different refined classification maps to generate a final classification result. The proposed D-AMVS contains three main blocks. (1) An adaptive region is generated by gradually extending the region around a central pixel based on two predefined parameters (T1 and T2) to utilize the spatial feature of ground targets in a VHR image. (2) For each classified map, the label of the central pixel is refined according to the majority voting rule within the adaptive region. This is defined as adaptive majority voting. Each initial classified map is refined in this manner pixel by pixel. (3) Finally, the refined classified maps are used to generate a final classification map, and the label of the central pixel in the final classification map is determined by applying AMV again. Each entire classified map is scanned and refined pixel by pixel based on the proposed D-AMVS. The accuracies of the proposed D-AMVS approach are investigated with two remote sensing images with high spatial resolutions of 1.0 m and 1.3 m. Compared with the classical majority voting method and a relatively new post-processing method called the general post-classification framework, the proposed D-AMVS can achieve a land cover classification map with less noise and higher classification accuracies.

Description: Future Internet, Vol. 10, Pages 46: A Tiered Control Plane Model for Service Function Chaining Isolation Future Internet doi: 10.3390/fi10060046 Authors: Håkon Gunleifsen Vasileios Gkioulos Thomas Kemmerich This article presents an architecture for encryption automation in interconnected Network Function Virtualization (NFV) domains. Current NFV implementations are designed for deployment within trusted domains, where overlay networks with static trusted links are utilized for enabling network security. Nevertheless, within a Service Function Chain (SFC), Virtual Network Function (VNF) flows cannot be isolated and end-to-end encrypted because each VNF requires direct access to the overall SFC data-flow. This restricts both end-users and Service Providers from enabling end-to-end security, and in extended VNF isolation within the SFC data traffic. Encrypting data flows on a per-flow basis results in an extensive amount of secure tunnels, which cannot scale efficiently in manual configurations. Additionally, creating secure data plane tunnels between NFV providers requires secure exchange of key parameters, and the establishment of an east–west control plane protocol. In this article, we present an architecture focusing on these two problems, investigating how overlay networks can be created, isolated, and secured dynamically. Accordingly, we propose an architecture for automated establishment of encrypted tunnels in NFV, which introduces a novel, tiered east–west communication channel between network controllers in a multi-domain environment.

Description: Remote Sensing, Vol. 10, Pages 929: Intercomparison and Validation of SAR-Based Ice Velocity Measurement Techniques within the Greenland Ice Sheet CCI Project Remote Sensing doi: 10.3390/rs10060929 Authors: John Peter Merryman Boncori Morten Langer Andersen Jørgen Dall Anders Kusk Martijn Kamstra Signe Bech Andersen Noa Bechor Suzanne Bevan Christian Bignami Noel Gourmelen Ian Joughin Hyung-Sup Jung Adrian Luckman Jeremie Mouginot Julia Neelmeijer Eric Rignot Kilian Scharrer Thomas Nagler Bernd Scheuchl Tazio Strozzi Ice velocity is one of the products associated with the Ice Sheets Essential Climate Variable. This paper describes the intercomparison and validation of ice-velocity measurements carried out by several international research groups within the European Space Agency Greenland Ice Sheet Climate Change Initiative project, based on space-borne Synthetic Aperture Radar (SAR) data. The goal of this activity was to survey the best SAR-based measurement and error characterization approaches currently in practice. To this end, four experiments were carried out, related to different processing techniques and scenarios, namely differential SAR interferometry, multi aperture SAR interferometry and offset-tracking of incoherent as well as of partially-coherent data. For each task, participants were provided with common datasets covering areas located on the Greenland ice-sheet margin and asked to provide mean velocity maps, quality characterization and a description of processing algorithms and parameters. The results were then intercompared and validated against GPS data, revealing in several cases significant differences in terms of coverage and accuracy. The algorithmic steps and parameters influencing the coverage, accuracy and spatial resolution of the measurements are discussed in detail for each technique, as well as the consistency between quality parameters and validation results. This allows several recommendations to be formulated, in particular concerning procedures which can reduce the impact of analyst decisions, and which are often found to be the cause of sub-optimal algorithm performance.

Description: Remote Sensing, Vol. 10, Pages 926: Comparison of SNAP-Derived Sentinel-2A L2A Product to ESA Product over Europe Remote Sensing doi: 10.3390/rs10060926 Authors: Najib Djamai Richard Fernandes Sentinel-2 is a constellation of two satellites launched by the European Space Agency (ESA), respectively on 23 June 2015 and 7 March 2017, to map geophysical parameters over land surfaces. ESA provides Level 2 bottom-of-atmosphere reflectance (BOA) products (ESA-L2A) for Europe, with plans for operational global coverage, as well as the Sen2Cor (S2C) offline processor. In this study, aerosol optical thickness (AOT), precipitable water vapour (WVP) and surface reflectance from ESA-L2A products are compared with S2C output when using identical input Level 1 radiance products. Additionally, AOT and WVP are validated against reference measurement. As ESA and S2C share the same input and atmospheric correction algorithm, it was hypothesized that they should show identical validation performance and that differences between products should be negligible in comparison to the uncertainty of retrieved geophysical parameters due to radiometric uncertainty alone. Validation and intercomparison was performed for five clear-sky growing season dates for each of three ESA-L2A tiles selected to span a range of vegetation and topography as well as to be close to the AERONET measurement site. Validation of S2C (ESA) products using AERONET site measurements indicated an overall root mean square error (RMSE) of 0.06 (0.07) and a bias of 0.05 (0.09) for AOT and 0.20 cm (0.22 cm) and the bias was −0.02 cm (−0.10 cm) for WVP. Intercomparison of S2C-L2A and ESA-L2A showed an overall agreement higher than 99% for scene classification (SCL) maps and negligible differences for WVP (RMSE under 0.09 and R2 above 0.99). Larger disagreement was observed for aerosol optical thickness (AOT) (RMSE up to 0.04 and R2 as low as 0.14). For BOA reflectance, disagreement between products depends on vegetation cover density, topography slope and spectral band. The largest differences were observed for red-edge and infrared bands in mountainous vegetated areas (RMSE up to 4.9% reflectance and R2 as low as 0.53). These differences are of similar magnitude to the radiometric calibration requirements for the Sentinel 2 imager. The differences had minimal impact of commonly used vegetation indices (NDVI, NDWI, EVI), but application of the Sentinel Level 2 biophysical processor generally resulted in proportional differences in most derived vegetation parameters. It is recommended that the consistency of ESA and S2C products should be improved by the developers of the ESA and S2C processors.

Description: Remote Sensing, Vol. 10, Pages 870: Low-Frequency Sea Surface Radar Doppler Echo Remote Sensing doi: 10.3390/rs10060870 Authors: Yury Yu. Yurovsky Vladimir N. Kudryavtsev Semyon A. Grodsky Bertrand Chapron The sea surface normalized radar backscatter cross-section (NRCS) and Doppler velocity (DV) exhibit energy at low frequencies (LF) below the surface wave peak. These NRCS and DV variations are coherent and thus may produce a bias in the DV averaged over large footprints, which is important for interpretation of Doppler scatterometer measurements. To understand the origin of LF variations, the platform-borne Ka-band radar measurements with well-pronounced LF variations at frequencies below wave peak (0.19 Hz) are analyzed. These data show that the LF NRCS is coherent with wind speed at 21 m height while the LF DV is not. The NRCS-wind correlation is significant only at frequencies below 0.01 Hz indicating either differences between near-surface wind (affecting radar signal) and 21-m height wind (actually measured) or contributions of other mechanisms of LF radar signal variations. It is shown that non-linearity in NRCS-wave slope Modulation Transfer Function (MTF) and inherent averaging within radar footprint account for NRCS and DV LF variance, with the exception of VV NRCS for which almost half of the LF variance is unexplainable by these mechanisms and perhaps attributable to wind fluctuations. Although the distribution of radar DV is quasi-Gaussian, suggesting virtually little impact of non-linearity, the LF DV variations arise due to footprint averaging of correlated local DV and non-linear NRCS. Numerical simulations demonstrate that MTF non-linearity weakly affects traditional linear MTF estimate (less than 10% for typical MTF magnitudes less than 20). Thus the linear MTF is a good approximation to evaluate the DV averaged over large footprints typical of satellite observations.

Description: Remote Sensing, Vol. 10, Pages 869: The Potential and Challenges of Using Soil Moisture Active Passive (SMAP) Sea Surface Salinity to Monitor Arctic Ocean Freshwater Changes Remote Sensing doi: 10.3390/rs10060869 Authors: Wenqing Tang Simon Yueh Daqing Yang Alexander Fore Akiko Hayashi Tong Lee Severine Fournier Benjamin Holt Sea surface salinity (SSS) links various components of the Arctic freshwater system. SSS responds to freshwater inputs from river discharge, sea ice change, precipitation and evaporation, and oceanic transport through the open straits of the Pacific and Atlantic oceans. However, in situ SSS data in the Arctic Ocean are very sparse and insufficient to depict the large-scale variability to address the critical question of how climate variability and change affect the Arctic Ocean freshwater. The L-band microwave radiometer on board the NASA Soil Moisture Active Passive (SMAP) mission has been providing SSS measurements since April 2015, at approximately 60 km resolution with Arctic Ocean coverage in 1–2 days. With improved land/ice correction, the SMAP SSS algorithm that was developed at the Jet Propulsion Laboratory (JPL) is able to retrieve SSS in ice-free regions 35 km of the coast. SMAP observes a large-scale contrast in salinity between the Atlantic and Pacific sides of the Arctic Ocean, while retrievals within the Arctic Circle vary over time, depending on the sea ice coverage and river runoff. We assess the accuracy of SMAP SSS through comparative analysis with in situ salinity data collected by Argo floats, ships, gliders, and in field campaigns. Results derived from nearly 20,000 pairs of SMAP and in situ data North of 50°N collocated within a 12.5-km radius and daily time window indicate a Root Mean Square Difference (RMSD) less than ~1 psu with a correlation coefficient of 0.82 and a near unity regression slope over the entire range of salinity. In contrast, the Hybrid Coordinate Ocean Model (HYCOM) has a smaller RMSD with Argo. However, there are clear systematic biases in the HYCOM for salinity in the range of 25–30 psu, leading to a regression slope of about 0.5. In the region North of 65°N, the number of collocated samples drops more than 70%, resulting in an RMSD of about 1.2 psu. SMAP SSS in the Kara Sea shows a consistent response to discharge anomalies from the Ob’ and Yenisei rivers between 2015 and 2016, providing an assessment of runoff impact in a region where no in situ salinity data are available for validation. The Kara Sea SSS anomaly observed by SMAP is missing in the HYCOM SSS, which assimilates climatological runoffs without interannual changes. We explored the feasibility of using SMAP SSS to monitor the sea surface salinity variability at the major Arctic Ocean gateways. Results show that although the SMAP SSS is limited to about 1 psu accuracy, many large salinity changes are observable. This may lead to the potential application of satellite SSS in the Arctic monitoring system as a proxy of the upper ocean layer freshwater exchanges with subarctic oceans.

Description: Remote Sensing, Vol. 10, Pages 934: Concentric Circle Pooling in Deep Convolutional Networks for Remote Sensing Scene Classification Remote Sensing doi: 10.3390/rs10060934 Authors: Kunlun Qi Qingfeng Guan Chao Yang Feifei Peng Shengyu Shen Huayi Wu Convolutional neural networks (CNNs) have been increasingly used in remote sensing scene classification/recognition. The conventional CNNs are sensitive to the rotation of the image scene, which will inevitably result in the misclassification of remote sensing scene images that belong to the same category. In this work, we equip the networks with a new pooling strategy, “concentric circle pooling”, to alleviate the above problem. The new network structure, called CCP-net can generate a concentric circle-based spatial-rotation-invariant representation of an image, hence improving the classification accuracy. The square kernel is adopted to approximate the circle kernels in concentric circle pooling, which is much more efficient and suitable for CNNs to propagate gradients. We implement the training of the proposed network structure with standard back-propagation, thus CCP-net is an end-to-end trainable CNNs. With these advantages, CCP-net should in general improve CNN-based remote sensing scene classification methods. Experiments using two publicly available remote sensing scene datasets demonstrate that using CCP-net can achieve competitive classification results compared with the state-of-art methods.

Description: Algorithms, Vol. 11, Pages 80: Scheduling a Single Machine with Primary and Secondary Objectives Algorithms doi: 10.3390/a11060080 Authors: Nodari Vakhania We study a scheduling problem in which jobs with release times and due dates are to be processed on a single machine. With the primary objective to minimize the maximum job lateness, the problem is strongly NP-hard. We describe a general algorithmic scheme to minimize the maximum job lateness, with the secondary objective to minimize the maximum job completion time. The problem of finding the Pareto-optimal set of feasible solutions with these two objective criteria is strongly NP-hard. We give the dominance properties and conditions when the Pareto-optimal set can be formed in polynomial time. These properties, together with our general framework, provide the theoretical background, so that the basic framework can be expanded to (exponential-time) implicit enumeration algorithms and polynomial-time approximation algorithms (generating the Pareto sub-optimal frontier with a fair balance between the two objectives). Some available in the literature experimental results confirm the practical efficiency of the proposed framework.

Description: Algorithms, Vol. 11, Pages 85: ILC with Initial State Learning for Fractional Order Linear Distributed Parameter Systems Algorithms doi: 10.3390/a11060085 Authors: Yong-Hong Lan Zhe-Min Cui This paper presents a second order P-type iterative learning control (ILC) scheme with initial state learning for a class of fractional order linear distributed parameter systems. First, by analyzing the control and learning processes, a discrete system for P-type ILC is established, and the ILC design problem is then converted to a stability problem for such a discrete system. Next, a sufficient condition for the convergence of the control input and the tracking errors is obtained by introducing a new norm and using the generalized Gronwall inequality, which is less conservative than the existing one. Finally, the validity of the proposed method is verified by a numerical example.

Description: Remote Sensing, Vol. 10, Pages 961: Temporal and Spatial Characteristics of EVI and Its Response to Climatic Factors in Recent 16 years Based on Grey Relational Analysis in Inner Mongolia Autonomous Region, China Remote Sensing doi: 10.3390/rs10060961 Authors: Dong He Guihua Yi Tingbin Zhang Jiaqing Miao Jingji Li Xiaojuan Bie The Inner Mongolia Autonomous Region (IMAR) is a major source of rivers, catchment areas, and ecological barriers in the northeast of China, related to the nation’s ecological security and improvement of the ecological environment. Therefore, studying the response of vegetation to climate change has become an important part of current global change research. Since existing studies lack detailed descriptions of the response of vegetation to different climatic factors using the method of grey correlation analysis based on pixel, the temporal and spatial patterns and trends of enhanced vegetation index (EVI) are analyzed in the growing season in IMAR from 2000 to 2015 based on moderate resolution imaging spectroradiometer (MODIS) EVI data. Combined with the data of air temperature, relative humidity, and precipitation in the study area, the grey relational analysis (GRA) method is used to study the time lag of EVI to climate change, and the study area is finally zoned into different parts according to the driving climatic factors for EVI on the basis of lag analysis. The driving zones quantitatively show the characteristics of temporal and spatial differences in response to different climatic factors for EVI. The results show that: (1) The value of EVI generally features in spatial distribution, increasing from the west to the east and the south to the north. The rate of change is 0.22/10°E from the west to the east, 0.28/10°N from the south to the north; (2) During 2000–2015, the EVI in IMAR showed a slightly upward trend with a growth rate of 0.021/10a. Among them, the areas with slight and significant improvement accounted for 21.1% and 7.5% of the total area respectively, ones with slight and significant degradation being 24.6% and 4.3%; (3) The time lag analysis of climatic factors for EVI indicates that vegetation growth in the study area lags behind air temperature by 1–2 months, relative humidity by 1–2 months, and precipitation by one month respectively; (4) During the growing season, the EVI of precipitation driving zone (21.8%) in IMAR is much larger than that in the air temperature driving zone (8%) and the relative humidity driving zone (11.6%). The growth of vegetation in IMAR generally has the closest relationship with precipitation. The growth of vegetation does not depend on the change of a single climatic factor. Instead, it is the result of the combined action of multiple climatic factors and human activities.

Description: Remote Sensing, Vol. 10, Pages 959: The Temperature Vegetation Dryness Index (TVDI) Based on Bi-Parabolic NDVI-Ts Space and Gradient-Based Structural Similarity (GSSIM) for Long-Term Drought Assessment Across Shaanxi Province, China (2000–2016) Remote Sensing doi: 10.3390/rs10060959 Authors: Ying Liu Hui Yue Traditional NDVI-Ts space is triangular or trapezoidal, but Liu et al. (2015) discovered that the NDVI-Ts space was bi-parabolic when the study area was covered with low biomass vegetation. Moreover, the numerical value of the indicator was considered in most of the study when the drought conditions in the space domain were evaluated. In addition, quantitatively assessing the spatial-temporal changes of the drought was not enough. In this study, first, we used MODIS NDVI and Ts data to reexamine if the NDVI-Ts space with “time” and a single pixel domain is bi-parabolic in the Shaanxi province of China, which is vegetated with low biomass to high biomass. This is compared with the triangular NDVI-Ts space and one of the well-known drought indexes called the temperature-vegetation index (TVX). The results demonstrated that dry and wet edges exhibited a parabolic shape again in scatter plots of Ts and NDVI in the Shaanxi province, which was linear in the triangular NDVI-Ts space. The Temperature Vegetation Dryness Index (TVDIc) was obtained from bi-parabolic NDVI-Ts andTVDIt was obtained from the triangular NDVI-Ts space and TVX were compared with 10-cm depth relative soil moisture. By estimating the 10-cm depth soil moisture, TVDIc was better than TVDIt, which were all apparently better than TVX. Second, combined with MODIS data, the drought conditions of the study area were assessed by TVDIc between 2000 to 2016. Spatially, the drought in the Shaanxi Province between 2000 to 2016 were mainly distributed in the northwest, North Shaanxi, and the North and East Guanzhong plain. The drought area of the Shaanxi province accounted for 31.95% in 2000 and 27.65% in 2016, respectively. Third, we quantitatively evaluated the variation of the drought status by using Gradient-based Structural Similarity (GSSIM) methods. The area of the drought conditions significantly changed and moderately changed at 5.34% and 40.22%, respectively, between 2000 and 2016. Finally, the possible reasons for drought change were discussed. The change of precipitation, temperature, irrigation, destruction or betterment of vegetation, and the enlargement of opening mining, etc., can lead to the variations of drought.

Description: Remote Sensing, Vol. 10, Pages 963: A Seismic Capacity Evaluation Approach for Architectural Heritage Using Finite Element Analysis of Three-Dimensional Model: A Case Study of the Limestone Hall in the Ming Dynasty Remote Sensing doi: 10.3390/rs10060963 Authors: Siliang Chen Shaohua Wang Chen Li Qingwu Hu Hongjun Yang A lot of architectural heritage in China are urgently in need to carry out seismic assessment for further conservation. In this paper, a seismic capacity evaluation approach for architectural heritage using finite element analysis with precision three-dimensional data was proposed. The Limestone Hall of Shaanxi Province was taken as an example. First, low attitude unmanned aerial vehicle photogrammetry and a close-range photogrammetry camera were used to collect multiple view images to obtain the precision three-dimensional current model of the Limestone. Second, the dimensions of internal structures of Limestone Hall are obtained by means of structural analysis; re-establishing the ideal model of Limestone Hall based on the modeling software. Third, a finite element analysis was conducted to find out the natural frequency and seismic stress in various conditions with the 3D model using ANSYS software. Finally, the seismic capacity analysis results were comprehensively evaluated for the risk assessment and simulation. The results showed that for architectural heritage with a multilayer structure, utilizing photogrammetric surveying and mapping, 3D software modeling, finite element software simulation, and seismic evaluation for simulation was feasible where the precision of the modeling and parameters determine the accuracy of the simulation. The precise degree of the three-dimensional model, the accurate degree of parameter measurement and estimation, the setting of component attributes in the finite element model and the strategy of finite element analysis have an important effect on the result of seismic assessment. The main body structure of the Limestone Hall could resist an VII-degree earthquake at most, and the ridge of the second floor could not resist a V-degree earthquake due to unsupported conditions. The maximum deformation of the Limestone Hall during the earthquake occurred in the tabia layer below the second roof.

Description: Algorithms, Vol. 11, Pages 86: Performance Optimal PI controller Tuning Based on Integrating Plus Time Delay Models Algorithms doi: 10.3390/a11060086 Authors: Christer Dalen David Di Ruscio A method for tuning PI controller parameters, a prescribed maximum time delay error or a relative time delay error is presented. The method is based on integrator plus time delay models. The integral time constant is linear in the relative time delay error, and the proportional constant is seen inversely proportional to the relative time delay error. The keystone in the method is the method product parameter, i.e., the product of the PI controller proportional constant, the integral time constant, and the integrator plus time delay model, velocity gain. The method product parameter is found to be constant for various PI controller tuning methods. Optimal suggestions are given for choosing the method product parameter, i.e., optimal such that the integrated absolute error or, more interestingly, the Pareto performance objective (i.e., integrated absolute error for combined step changes in output and input disturbances) is minimised. Variants of the presented tuning method are demonstrated for tuning PI controllers for motivated (possible) higher order process model examples, i.e., the presented method is combined with the model reduction step (process–reaction curve) in Ziegler–Nichols.

Description: Remote Sensing, Vol. 10, Pages 975: A Hybrid Analytic Network Process and Artificial Neural Network (ANP-ANN) Model for Urban Earthquake Vulnerability Assessment Remote Sensing doi: 10.3390/rs10060975 Authors: Mohsen Alizadeh Ibrahim Ngah Mazlan Hashim Biswajeet Pradhan Amin Beiranvand Pour Vulnerability assessment is one of the prerequisites for risk analysis in disaster management. Vulnerability to earthquakes, especially in urban areas, has increased over the years due to the presence of complex urban structures and rapid development. Urban vulnerability is a result of human behavior which describes the extent of susceptibility or resilience of social, economic, and physical assets to natural disasters. The main aim of this paper is to develop a new hybrid framework using Analytic Network Process (ANP) and Artificial Neural Network (ANN) models for constructing a composite social, economic, environmental, and physical vulnerability index. This index was then applied to Tabriz City, which is a seismic-prone province in the northwestern part of Iran with recurring devastating earthquakes and consequent heavy casualties and damages. A Geographical Information Systems (GIS) analysis was used to identify and evaluate quantitative vulnerability indicators for generating an earthquake vulnerability map. The classified and standardized indicators were subsequently weighed and ranked using an ANP model to construct the training database. Then, standardized maps coupled with the training site maps were presented as input to a Multilayer Perceptron (MLP) neural network for producing an Earthquake Vulnerability Map (EVM). Finally, an EVM was produced for Tabriz City and the level of vulnerability in various zones was obtained. South and southeast regions of Tabriz City indicate low to moderate vulnerability, while some zones of the northeastern tract are under critical vulnerability conditions. Furthermore, the impact of the vulnerability of Tabriz City on population during an earthquake was included in this analysis for risk estimation. A comparison of the result produced by EVM and the Population Vulnerability (PV) of Tabriz City corroborated the validity of the results obtained by ANP-ANN. The findings of this paper are useful for decision-makers and government authorities to obtain a better knowledge of a city’s vulnerability dimensions, and to adopt preparedness strategies in the future for Tabriz City. The developed hybrid framework of ANP and ANN Models can easily be replicated and applied to other urban regions around the world for sustainability and environmental management.

Description: Future Internet, Vol. 10, Pages 56: Big Data Perspective and Challenges in Next Generation Networks Future Internet doi: 10.3390/fi10070056 Authors: Kashif Sultan Hazrat Ali Zhongshan Zhang With the development towards the next generation cellular networks, i.e., 5G, the focus has shifted towards meeting the higher data rate requirements, potential of micro cells and millimeter wave spectrum. The goals for next generation networks are very high data rates, low latency and handling of big data. The achievement of these goals definitely require newer architecture designs, upgraded technologies with possible backward support, better security algorithms and intelligent decision making capability. In this survey, we identify the opportunities which can be provided by 5G networks and discuss the underlying challenges towards implementation and realization of the goals of 5G. This survey also provides a discussion on the recent developments made towards standardization, the architectures which may be potential candidates for deployment and the energy concerns in 5G networks. Finally, the paper presents a big data perspective and the potential of machine learning for optimization and decision making in 5G networks.

Description: Remote Sensing, Vol. 10, Pages 976: Physical Retrieval of Land Surface Emissivity Spectra from Hyper-Spectral Infrared Observations and Validation with In Situ Measurements Remote Sensing doi: 10.3390/rs10060976 Authors: Guido Masiello Carmine Serio Sara Venafra Giuliano Liuzzi Laurent Poutier Frank-M. Göttsche A fully physical retrieval scheme for land surface emissivity spectra is presented, which applies to high spectral resolution infrared observations from satellite sensors. The surface emissivity spectrum is represented with a suitably truncated Principal Component Analysis (PCA) transform and PCA scores are simultaneously retrieved with surface temperature and atmospheric parameters. The retrieval methodology has been developed within the general framework of Optimal Estimation and, in this context, is the first physical scheme based on a PCA representation of the emissivity spectrum. The scheme has been applied to IASI (Infrared Atmospheric Sounder Interferometer) and the retrieved emissivities have been validated with in situ observations acquired during a field experiment carried out in 2017 at Gobabeb (Namib desert) validation station. It has been found that the retrieved emissivity spectra are independent of background information and in good agreement with in situ observations.

Description: Remote Sensing, Vol. 10, Pages 993: Landslide Identification and Monitoring along the Jinsha River Catchment (Wudongde Reservoir Area), China, Using the InSAR Method Remote Sensing doi: 10.3390/rs10070993 Authors: Chaoying Zhao Ya Kang Qin Zhang Zhong Lu Bin Li Landslide identification and monitoring are two significant research aspects for landslide analysis. In addition, landslide mode deduction is key for the prevention of landslide hazards. Surface deformation results with different scales can serve for different landslide analysis. L-band synthetic aperture radar (SAR) data calculated with Interferometric Point Target Analysis (IPTA) are first employed to detect potential landslides at the catchment-scale Wudongde reservoir area. Twenty-two active landslides are identified and mapped over more than 2500 square kilometers. Then, for one typical landslide, Jinpingzi landslide, its spatiotemporal deformation characteristics are analyzed with the small baseline subsets (SBAS) interferometric synthetic aperture radar (InSAR) technique. High-precision surface deformation results are obtained by comparing with in-situ georobot measurements. The spatial deformation pattern reveals the different stabilities among five different sections of Jinpingzi landslide. InSAR results for Section II of Jinpingzi landslide show that this active landslide is controlled by two boundaries and geological structure, and its different landslide deformation magnitudes at different sections on the surface companying with borehole deformation reveals the pull-type landslide mode. Correlation between time series landslide motion and monthly precipitation, soil moisture inverted from SAR intensity images and water level fluctuations suggests that heavy rainfall is the main trigger factor, and the maximum deformation of the landslide was highly consistent with the peak precipitation with a time lag of about 1 to 2 months, which gives us important guidelines to mitigate and prevent this kind of hazard.

Description: Remote Sensing, Vol. 10, Pages 1000: Post-Fire Vegetation Succession and Surface Energy Fluxes Derived from Remote Sensing Remote Sensing doi: 10.3390/rs10071000 Authors: Xuedong Li Hongyan Zhang Guangbin Yang Yanling Ding Jianjun Zhao The increasing frequency of fires inhibits the estimation of carbon reserves in boreal forest ecosystems because fires release significant amounts of carbon into the atmosphere through combustion. However, less is known regarding the effects of vegetation succession processes on ecosystem C-flux that follow fires. This paper describes intra- and inter-annual vegetation restoration trajectories via MODIS time-series and Landsat data. The temporal and spatial characteristics of the natural succession were analyzed from 2000 to 2016. Finally, we regressed post-fire MODIS EVI, LST and LSWI values onto GPP and NPP values to identify the main limiting factors during post-fire carbon exchange. The results show immediate variations after the fire event, with EVI and LSWI decreasing by 0.21 and 0.31, respectively, and the LST increasing to 6.89 °C. After this initial variation, subsequent fire-induced variations were significantly smaller; instead, seasonality began governing the change characteristics. The greatest differences in EVI, LST and LSWI were observed in August and September compared to those in other months (0.29, 6.9 and 0.35, respectively), including July, which was the second month after the fire. We estimated the mean EVI recovery periods under different fire intensities (approximately 10, 12 and 16 years): the LST recovery time is one year earlier than that of the EVI. GPP and NPP decreased after the fire by 22–45 g C·m−2·month−1 (30–80%) and 0.13–0.35 kg C·m−2·year−1 (20–60%), respectively. Excluding the winter period, when no photosynthesis occurred, the correlation between the EVI and GPP was the strongest, and the correlation coefficient varied with the burn intensity. When changes in EVI, LST and LSWI after the fire in the boreal forest were more significant, the severity of the fire determined the magnitude of the changes, and the seasonality aggravated these changes. On the other hand, the seasonality is another important factor that affects vegetation restoration and land-surface energy fluxes in boreal forests. The strong correlations between EVI and GPP/NPP reveal that the C-flux can be simply and directly estimated on a per-pixel basis from EVI data, which can be used to accurately estimate land-surface energy fluxes during vegetation restoration and reduce uncertainties in the estimation of forests’ carbon reserves.

Description: Remote Sensing, Vol. 10, Pages 1018: An Appraisal of the Potential of Landsat 8 in Estimating Chlorophyll-a, Ammonium Concentrations and Other Water Quality Indicators Remote Sensing doi: 10.3390/rs10071018 Authors: Vassiliki Markogianni Dionissios Kalivas George P. Petropoulos Elias Dimitriou In-situ monitoring of lake water quality in synergy with satellite remote sensing represents the latest scientific trend in many water quality monitoring programs worldwide. This study investigated the suitability of the Operational Land Imager (OLI) instrument onboard the Landsat 8 satellite platform in accurately estimating key water quality parameters such as chlorophyll-a and nutrient concentrations. As a case study the largest freshwater body of Greece (Trichonis Lake) was used. Two Landsat 8 images covering the study site were acquired on 30 October 2013 and 30 August 2014 respectively. Near concurrent in-situ observations from two water sampling campaigns were also acquired from 22 stations across the lake under study. In-situ measurements (nutrients and chlorophyll-a concentrations) were statistically correlated with various spectral band combinations derived from the Landsat imagery of year 2014. Subsequently, the most statistically promising predictive models were applied to the satellite image of 2013 and validation was conducted using in-situ data of 2013 as reference. Results showed a relatively variable statistical relationship between the in-situ and reflectances (R logchl-a: 0.58, R NH4+: 0.26, R chl-a: 0.44). Correlation coefficient (R) values reported of up to 0.7 for ammonium concentrations and also up to 0.5 and up to 0.4 for chl-a concentration and chl-a concentrations respectively. These results represent a higher accuracy of Landsat 8 in comparison to its predecessors in the Landsat satellites series, as evidenced in the literature. Our findings suggest that Landsat 8 has a promising capability in estimating water quality components in an oligotrophic freshwater body characterized by a complete absence of any quantitative, temporal and spatial variance, as is the case of Trichonis lake. Yet, even with the presence of a lot of ground information as was the case in our study, a quantitatively accurate estimation of water quality constituents in coastal/inland waters remains a great challenge. The launch of sophisticated spaceborne sensing systems, such as that of Landsat 8, can assist in improving our ability to estimate freshwater lake properties from space.

Description: Remote Sensing, Vol. 10, Pages 1022: Improving the Estimation of Daily Aerosol Optical Depth and Aerosol Radiative Effect Using an Optimized Artificial Neural Network Remote Sensing doi: 10.3390/rs10071022 Authors: Wenmin Qin Lunche Wang Aiwen Lin Ming Zhang Muhammad Bilal Aerosols can absorb and scatter surface solar radiation (SSR), which is called the aerosol radiative forcing effect (ARF). Great efforts have been made for the estimation of the aerosol optical depth (AOD), SSR and ARF using meteorological measurements and satellite observations. However, the accuracy, and spatial and temporal resolutions of these existing AOD, SSR and ARF models should be improved to meet the application requirements, due to the uncertainties and gaps of input parameters. In this study, an optimized back propagation (BP) artificial neural network (Genetic_BP) was developed for improving the estimation of the AOD values. The retrieved AOD values using the Genetic_BP model and meteorological measurements at China Meteorological Administration (CMA) stations were used to calculate SSR and bottom of the atmosphere (BOA) ARF (ARFB) using Yang’s Hybrid model (YHM). The result show that the Genetic_BP could be used for estimating AOD values with high accuracy (R = 0.866 for CASNET (China Aerosol Remote Sensing Network) stations and R = 0.865 for AERONET (Aerosol Robotic Network) stations). The estimated SSR also showed a good agreement with SSR measurements at 96 CMA radiation stations, with RMSE, MAE, R and R2 of 29.27%, 23.77%, 0.948, and 0.899, respectively. The estimated ARFB values are also highly correlated with the AERONET ARFB ones with RMSE, MAE, R and R2 of −35.47%, −25.33%, 0.843, and 0.711, respectively. Finally, the spatial and temporal variations of AOD, SSR, and ARFB values over Mainland China were investigated. Both AOD and SSR values are generally higher in summer than in other seasons. The ARFB are generally stronger in spring and summer than in other seasons. The ranges for the monthly mean AOD, SSR and ARFB values over Mainland China are 0.183–0.333, 10.218–24.196 MJ m−2day−1 and −2.986 to −1.244 MJ m−2day−1, respectively. The Qinghai-Tibetan Plateau has always been an area with the highest SSR, the lowest AOD and the weakest ARFB. In contrast, the Sichuan Basin has always been an area with low SSR, high AOD, and strong ARFB. The newly proposed AOD model may be of vital importance for improving the accuracy and computational efficiency of AOD, SSR and ARFB estimations for solar energy applications, ecological modeling, and energy policy.

Description: Algorithms, Vol. 11, Pages 94: Tensor Completion Based on Triple Tubal Nuclear Norm Algorithms doi: 10.3390/a11070094 Authors: Dongxu Wei Andong Wang Xiaoqin Feng Boyu Wang Bo Wang Many tasks in computer vision suffer from missing values in tensor data, i.e., multi-way data array. The recently proposed tensor tubal nuclear norm (TNN) has shown superiority in imputing missing values in 3D visual data, like color images and videos. However, by interpreting in a circulant way, TNN only exploits tube (often carrying temporal/channel information) redundancy in a circulant way while preserving the row and column (often carrying spatial information) relationship. In this paper, a new tensor norm named the triple tubal nuclear norm (TriTNN) is proposed to simultaneously exploit tube, row and column redundancy in a circulant way by using a weighted sum of three TNNs. Thus, more spatial-temporal information can be mined. Further, a TriTNN-based tensor completion model with an ADMM solver is developed. Experiments on color images, videos and LiDAR datasets show the superiority of the proposed TriTNN against state-of-the-art nuclear norm-based tensor norms.

Description: Algorithms, Vol. 11, Pages 93: Layered Graphs: Applications and Algorithms Algorithms doi: 10.3390/a11070093 Authors: Bhadrachalam Chitturi Srijith Balachander Sandeep Satheesh Krithic Puthiyoppil The computation of distances between strings has applications in molecular biology, music theory and pattern recognition. One such measure, called short reversal distance, has applications in evolutionary distance computation. It has been shown that this problem can be reduced to the computation of a maximum independent set on the corresponding graph that is constructed from the given input strings. The constructed graphs primarily fall into a class that we call layered graphs. In a layered graph, each layer refers to a subgraph containing, at most, some k vertices. The inter-layer edges are restricted to the vertices in adjacent layers. We study the MIS, MVC, MDS, MCV and MCD problems on layered graphs where MIS computes the maximum independent set; MVC computes the minimum vertex cover; MDS computes the minimum dominating set; MCV computes the minimum connected vertex cover; and MCD computes the minimum connected dominating set. The MIS, MVC and MDS are computed in polynomial time if k=Θ(log|V|). MCV and MCD are computed polynomial time if k=O((log|V|)α), where α<1. If k=Θ((log|V|)1+ϵ), for ϵ>0, then MIS, MVC and MDS are computed in quasi-polynomial time. If k=Θ(log|V|), then MCV and MCD are computed in quasi-polynomial time.

Description: Remote Sensing, Vol. 10, Pages 1205: Examining the Accuracy of GlobCurrent Upper Ocean Velocity Data Products on the Northwestern Atlantic Shelf Remote Sensing doi: 10.3390/rs10081205 Authors: Hui Feng Douglas Vandemark Julia Levin John Wilkin This study provides a regional coastal ocean assessment of global upper ocean current data developed by the GlobCurrent (GC) project. These gridded data synthesize multiple satellite altimeter and wind model inputs to estimate both Geostrophic and Ekman-layer velocities. While the GC product was mostly devised and intended for open ocean studies, the present objective is to assess whether its data quality nearer the coast is suitable for other applications. The key ground truth sources are long-term mean and time series observations on the Northwestern Atlantic (NWA) shelf derived from Acoustic Doppler Current Profilers (ADCP) and high frequency (HF) radar networks in both the Mid-Atlantic Bight (MAB) and the Gulf of Maine (GoM). Results indicate that mean geostrophic currents across the MAB and the offshore GoM agree to roughly 10% in speed and 10 degree in direction with the in situ depth-averaged currents, with correlation levels of 0.5–0.8 at seasonal and longer time scales. Interior GoM comparisons at 5 coastal buoys show much less agreement. One likely source of GoM error is shown to be the GC mean dynamic topography near the coast. Comparison to near-surface MAB HF radar current measurements on the MAB shelf shows significant GC data improvement when including the surface Ekman term. Overall, the study results imply that application of GlobCurrent data may prove useful in coastal seas with broad continental shelves such as the MAB or Scotian shelf, but that large inaccuracies inside the GoM diminish its utility there.

Description: Algorithms, Vol. 11, Pages 116: A Robust and Energy-Efficient Weighted Clustering Algorithm on Mobile Ad Hoc Sensor Networks † Algorithms doi: 10.3390/a11080116 Authors: Huamei Qi Fengqi Liu Tailong Xiao Jiang Su In an Ad hoc sensor network, nodes have characteristics of limited battery energy, self-organization and low mobility. Due to the mobility and heterogeneity of the energy consumption in the hierarchical network, the cluster head and topology are changed dynamically. Therefore, topology control and energy consumption are growing to be critical in enhancing the stability and prolonging the lifetime of the network. In order to improve the survivability of Ad hoc network effectively, this paper proposes a new algorithm named the robust, energy-efficient weighted clustering algorithm (RE2WCA). For the homogeneous of the energy consumption; the proposed clustering algorithm takes the residual energy and group mobility into consideration by restricting minimum iteration times. In addition, a distributed fault detection algorithm and cluster head backup mechanism are presented to achieve the periodic and real-time topology maintenance to enhance the robustness of the network. The network is analyzed and the simulations are performed to compare the performance of this new clustering algorithm with the similar algorithms in terms of cluster characteristics, lifetime, throughput and energy consumption of the network. The result shows that the proposed algorithm provides better performance than others.

Description: Remote Sensing, Vol. 10, Pages 1215: Filtering Stems and Branches from Terrestrial Laser Scanning Point Clouds Using Deep 3-D Fully Convolutional Networks Remote Sensing doi: 10.3390/rs10081215 Authors: Zhouxin Xi Chris Hopkinson Laura Chasmer Terrestrial laser scanning (TLS) can produce precise and detailed point clouds of forest environment, thus enabling quantitative structure modeling (QSM) for accurate tree morphology and wood volume allocation. Applying QSM to plot-scale wood delineation is highly dependent on wood visibility from forest scans. A common problem is to filter wood point from noisy leafy points in the crowns and understory. This study proposed a deep 3-D fully convolution network (FCN) to filter both stem and branch points from complex plot scans. To train the 3-D FCN, reference stem and branch points were delineated semi-automatically for 14 sampled areas and three common species. Among seven testing areas, agreements between reference and model prediction, measured by intersection over union (IoU) and overall accuracy (OA), were 0.89 (stem IoU), 0.54 (branch IoU), 0.79 (mean IoU), and 0.94 (OA). Wood filtering results were further incorporated to a plot-scale QSM to extract individual tree forms, isolated wood, and understory wood from three plot scans with visual assessment. The wood filtering experiment provides evidence that deep learning is a powerful tool in 3-D point cloud processing and parsing.

Description: Remote Sensing, Vol. 10, Pages 1208: Seabed Mapping in Coastal Shallow Waters Using High Resolution Multispectral and Hyperspectral Imagery Remote Sensing doi: 10.3390/rs10081208 Authors: Javier Marcello Francisco Eugenio Javier Martín Ferran Marqués Coastal ecosystems experience multiple anthropogenic and climate change pressures. To monitor the variability of the benthic habitats in shallow waters, the implementation of effective strategies is required to support coastal planning. In this context, high-resolution remote sensing data can be of fundamental importance to generate precise seabed maps in coastal shallow water areas. In this work, satellite and airborne multispectral and hyperspectral imagery were used to map benthic habitats in a complex ecosystem. In it, submerged green aquatic vegetation meadows have low density, are located at depths up to 20 m, and the sea surface is regularly affected by persistent local winds. A robust mapping methodology has been identified after a comprehensive analysis of different corrections, feature extraction, and classification approaches. In particular, atmospheric, sunglint, and water column corrections were tested. In addition, to increase the mapping accuracy, we assessed the use of derived information from rotation transforms, texture parameters, and abundance maps produced by linear unmixing algorithms. Finally, maximum likelihood (ML), spectral angle mapper (SAM), and support vector machine (SVM) classification algorithms were considered at the pixel and object levels. In summary, a complete processing methodology was implemented, and results demonstrate the better performance of SVM but the higher robustness of ML to the nature of information and the number of bands considered. Hyperspectral data increases the overall accuracy with respect to the multispectral bands (4.7% for ML and 9.5% for SVM) but the inclusion of additional features, in general, did not significantly improve the seabed map quality.

Description: Remote Sensing, Vol. 10, Pages 1209: Fog and Low Cloud Frequency and Properties from Active-Sensor Satellite Data Remote Sensing doi: 10.3390/rs10081209 Authors: Jan Cermak An analysis of fog and low cloud properties and distribution is performed using satellite-based LiDAR. Recent years have seen great progress in the remote sensing of fog and low clouds using passive satellite-based sensors. On this basis, maps of fog distribution and frequency as well as baseline climatologies have been constructed. However, no information on fog altitude and vertical extent is available in this way, and fog/low cloud below other clouds cannot be detected in most cases. In this study, ten years of observations by the LiDAR aboard the CALIPSO (Cloud-Aerosol LiDAR and Pathfinder Satellite Observations) platform are used to construct a map and statistical evaluations of fog/low cloud distribution and properties. For the purpose of evaluation, a comparison is made to an evaluation of fog/low cloud distribution in Europe, derived from Meteosat measurements using the Satellite-Based Operation Fog Observation Scheme (SOFOS). Both maps show good agreement in spatial patterns in this region with very diverse fog formation mechanisms. It is found that fog/low cloud layers display distinct spatial differences in terms of geometrical thickness and detection accuracy. The number of fog/low cloud instances missed by passive-sensor retrievals due to multi-layer cloud situations is considerable, with clear regional differences.

Description: Remote Sensing, Vol. 10, Pages 1216: UAV Multispectral Imagery Can Complement Satellite Data for Monitoring Forest Health Remote Sensing doi: 10.3390/rs10081216 Authors: Jonathan P. Dash Grant D. Pearse Michael S. Watt The development of methods that can accurately detect physiological stress in forest trees caused by biotic or abiotic factors is vital for ensuring productive forest systems that can meet the demands of the Earth’s population. The emergence of new sensors and platforms presents opportunities to augment traditional practices by combining remotely-sensed data products to provide enhanced information on forest condition. We tested the sensitivity of multispectral imagery collected from time-series unmanned aerial vehicle (UAV) and satellite imagery to detect herbicide-induced stress in a carefully controlled experiment carried out in a mature Pinus radiata D. Don plantation. The results revealed that both data sources were sensitive to physiological stress in the study trees. The UAV data were more sensitive to changes at a finer spatial resolution and could detect stress down to the level of individual trees. The satellite data tested could only detect physiological stress in clusters of four or more trees. Resampling the UAV imagery to the same spatial resolution as the satellite imagery revealed that the differences in sensitivity were not solely the result of spatial resolution. Instead, vegetation indices suited to the sensor characteristics of each platform were required to optimise the detection of physiological stress from each data source. Our results define both the spatial detection threshold and the optimum vegetation indices required to implement monitoring of this forest type. A comparison between time-series datasets of different spectral indices showed that the two sensors are compatible and can be used to deliver an enhanced method for monitoring physiological stress in forest trees at various scales. We found that the higher resolution UAV imagery was more sensitive to fine-scale instances of herbicide induced physiological stress than the RapidEye imagery. Although less sensitive to smaller phenomena the satellite imagery was found to be very useful for observing trends in physiological stress over larger areas.

Description: Remote Sensing, Vol. 10, Pages 1219: Lidar Studies of Wind Turbulence in the Stable Atmospheric Boundary Layer Remote Sensing doi: 10.3390/rs10081219 Authors: Viktor A. Banakh Igor N. Smalikho The kinetic energy of turbulence, the dissipation rate of turbulent energy, and the integral scale of turbulence in the stable atmospheric boundary layer at the location heights of low-level jets (LLJs) have been measured with a coherent Doppler light detection and ranging (lidar) system. The turbulence is shown to be weak in the central part of LLJs. The kinetic energy of turbulence at the maximum velocity heights of the jet does not exceed 0.1 (m/s)2, while the dissipation rate is about 10−5 m2/s3. On average, the integral scale of turbulence in the central part of the jet is about 100 m, which is two to three times less than the effective vertical size of the LLJ.

Description: Remote Sensing, Vol. 10, Pages 1222: Systematic Comparison of Power Line Classification Methods from ALS and MLS Point Cloud Data Remote Sensing doi: 10.3390/rs10081222 Authors: Yanjun Wang Qi Chen Lin Liu Xiong Li Arun Kumar Sangaiah Kai Li Power lines classification is important for electric power management and geographical objects extraction using LiDAR (light detection and ranging) point cloud data. Many supervised classification approaches have been introduced for the extraction of features such as ground, trees, and buildings, and several studies have been conducted to evaluate the framework and performance of such supervised classification methods in power lines applications. However, these studies did not systematically investigate all of the relevant factors affecting the classification results, including the segmentation scale, feature selection, classifier variety, and scene complexity. In this study, we examined these factors systematically using airborne laser scanning and mobile laser scanning point cloud data. Our results indicated that random forest and neural network were highly suitable for power lines classification in forest, suburban, and urban areas in terms of the precision, recall, and quality rates of the classification results. In contrast to some previous studies, random forest yielded the best results, while Naïve Bayes was the worst classifier in most cases. Random forest was the more robust classifier with or without feature selection for various LiDAR point cloud data. Furthermore, the classification accuracies were directly related to the selection of the local neighborhood, classifier, and feature set. Finally, it was suggested that random forest should be considered in most cases for power line classification.

Description: Remote Sensing, Vol. 10, Pages 1220: Correction: Shao, Z.; et al. A Benchmark Dataset for Performance Evaluation of Multi-Label Remote Sensing Image Retrieval. Remote Sens. 2018, 10, 964 Remote Sensing doi: 10.3390/rs10081220 Authors: Zhenfeng Shao Ke Yang Weixun Zhou In our paper [1], we presented a dense labeling dataset that can be used for not only single-label and multi-label remote sensing image retrieval but also pixel-based problems such as semantic segmentation.[...]

Description: Remote Sensing, Vol. 10, Pages 1227: Towards Global-Scale Seagrass Mapping and Monitoring Using Sentinel-2 on Google Earth Engine: The Case Study of the Aegean and Ionian Seas Remote Sensing doi: 10.3390/rs10081227 Authors: Dimosthenis Traganos Bharat Aggarwal Dimitris Poursanidis Konstantinos Topouzelis Nektarios Chrysoulakis Peter Reinartz Seagrasses are traversing the epoch of intense anthropogenic impacts that significantly decrease their coverage and invaluable ecosystem services, necessitating accurate and adaptable, global-scale mapping and monitoring solutions. Here, we combine the cloud computing power of Google Earth Engine with the freely available Copernicus Sentinel-2 multispectral image archive, image composition, and machine learning approaches to develop a methodological workflow for large-scale, high spatiotemporal mapping and monitoring of seagrass habitats. The present workflow can be easily tuned to space, time and data input; here, we show its potential, mapping 2510.1 km2 of P. oceanica seagrasses in an area of 40,951 km2 between 0 and 40 m of depth in the Aegean and Ionian Seas (Greek territorial waters) after applying support vector machines to a composite of 1045 Sentinel-2 tiles at 10-m resolution. The overall accuracy of P. oceanica seagrass habitats features an overall accuracy of 72% following validation by an independent field data set to reduce bias. We envision that the introduced flexible, time- and cost-efficient cloud-based chain will provide the crucial seasonal to interannual baseline mapping and monitoring of seagrass ecosystems in global scale, resolving gain and loss trends and assisting coastal conservation, management planning, and ultimately climate change mitigation.

Description: Remote Sensing, Vol. 10, Pages 1229: A CNN-SIFT Hybrid Pedestrian Navigation Method Based on First-Person Vision Remote Sensing doi: 10.3390/rs10081229 Authors: Qi Zhao Boxue Zhang Shuchang Lyu Hong Zhang Daniel Sun Guoqiang Li Wenquan Feng The emergence of new wearable technologies, such as action cameras and smart glasses, has driven the use of the first-person perspective in computer applications. This field is now attracting the attention and investment of researchers aiming to develop methods to process first-person vision (FPV) video. The current approaches present particular combinations of different image features and quantitative methods to accomplish specific objectives, such as object detection, activity recognition, user–machine interaction, etc. FPV-based navigation is necessary in some special areas, where Global Position System (GPS) or other radio-wave strength methods are blocked, and is especially helpful for visually impaired people. In this paper, we propose a hybrid structure with a convolutional neural network (CNN) and local image features to achieve FPV pedestrian navigation. A novel end-to-end trainable global pooling operator, called AlphaMEX, has been designed to improve the scene classification accuracy of CNNs. A scale-invariant feature transform (SIFT)-based tracking algorithm is employed for movement estimation and trajectory tracking of the person through each frame of FPV images. Experimental results demonstrate the effectiveness of the proposed method. The top-1 error rate of the proposed AlphaMEX-ResNet outperforms the original ResNet (k = 12) by 1.7% on the ImageNet dataset. The CNN-SIFT hybrid pedestrian navigation system reaches 0.57 m average absolute error, which is an adequate accuracy for pedestrian navigation. Both positions and movements can be well estimated by the proposed pedestrian navigation algorithm with a single wearable camera.

Description: Remote Sensing, Vol. 10, Pages 1244: The Locking Depth of the Cholame Section of the San Andreas Fault from ERS2-Envisat InSAR Remote Sensing doi: 10.3390/rs10081244 Authors: Guillaume Bacques Marcello de Michele Daniel Raucoules Hideo Aochi The Cholame section of the San Andreas Fault (SAF), which has been considered locked since 1857, has been little studied using geodetic methods. In this study, we propose to use Interferometric Synthetic Aperture Radar (InSAR) to contribute to the improvement of the knowledge of this section of the SAF. In particular, the objective of this work is to provide a description of the transition between the Parkfield and Cholame-Carrizo segments further southeast by producing an estimate of the locking depth of the Cholame segment by combining ERS2 (European Remote Sensing) and Envisat Advanced SAR (ASAR) satellites data. Our results indicate that the locking depth between the Parkfield and the Cholame-Carrizo segments deepens to the southeast. We then use these results as a hint to refine the tectonic loading on this section of the SAF.

Description: Remote Sensing, Vol. 10, Pages 1240: Identifying Establishment Year and Pre-Conversion Land Cover of Rubber Plantations on Hainan Island, China Using Landsat Data during 1987–2015 Remote Sensing doi: 10.3390/rs10081240 Authors: Bangqian Chen Xiangming Xiao Zhixiang Wu Tin Yun Weili Kou Huichun Ye Qinghuo Lin Russell Doughty Jinwei Dong Jun Ma Wei Luo Guishui Xie Jianhua Cao Knowing the stand age of rubber tree (Hevea brasiliensis) plantations is vitally important for best management practices, estimations of rubber latex yields, and carbon cycle studies (e.g., biomass, carbon pools, and fluxes). However, the stand age (as estimated from the establishment year of rubber plantation) is not available across large regions. In this study, we analyzed Landsat time series images from 1987–2015 and developed algorithms to identify (1) the establishment year of rubber plantations; and (2) the pre-conversion land cover types, such as old rubber plantations, evergreen forests, and cropland. Exposed soil during plantation establishment and linear increases in canopy closure during non-production periods (rubber seedling to mature plantation) were used to identify the establishment year of rubber plantations. Based on the rubber plantation map for 2015 (overall accuracy = 97%), and 1981 Landsat images since 1987, we mapped the establishment year of rubber plantations on Hainan Island (R2 = 0.85/0.99, and RMSE = 2.34/0.54 years at pixel/plantation scale). The results show that: (1) significant conversion of croplands and old rubber plantations to new rubber plantations has occurred substantially in the northwest and northern regions of Hainan Island since 2000, while old rubber plantations were mainly distributed in the southeastern inland strip; (2) the pattern of rubber plantation expansion since 1987 consisted of fragmented plantations from smallholders, and there was no tendency to expand towards a higher altitude and steep slope regions; (3) the largest land source for new rubber plantations since 1988 was old rubber plantations (1.26 × 105 ha), followed by cropland (0.95 × 105 ha), and evergreen forests (0.68 × 105 ha). The resultant algorithms and maps of establishment year and pre-conversion land cover types are likely to be useful in plantation management, and ecological assessments of rubber plantation expansion in China.

Description: Remote Sensing, Vol. 10, Pages 1250: Use of the SAR Shadowing Effect for Deforestation Detection with Sentinel-1 Time Series Remote Sensing doi: 10.3390/rs10081250 Authors: Alexandre Bouvet Stéphane Mermoz Marie Ballère Thierry Koleck Thuy Le Toan To detect deforestation using Earth Observation (EO) data, widely used methods are based on the detection of temporal changes in the EO measurements within the deforested patches. In this paper, we introduce a new indicator of deforestation obtained from synthetic aperture radar (SAR) images, which relies on a geometric artifact that appears when deforestation happens, in the form of a shadow at the border of the deforested patch. The conditions for the appearance of these shadows are analyzed, as well as the methods that can be employed to exploit them to detect deforestation. The approach involves two steps: (1) detection of new shadows; (2) reconstruction of the deforested patch around the shadows. The launch of Sentinel-1 in 2014 has opened up opportunities for a potential exploitation of this approach in large-scale applications. A deforestation detection method based on this approach was tested in a 600,000 ha site in Peru. A detection rate of more than 95% is obtained for samples larger than 0.4 ha, and the method was found to perform better than the optical-based UMD-GLAD Forest Alert dataset both in terms of spatial and temporal detection. Further work needed to exploit this approach at operational levels is discussed.

Description: Remote Sensing, Vol. 10, Pages 1245: Potential Applications of GNSS-R Observations over Agricultural Areas: Results from the GLORI Airborne Campaign Remote Sensing doi: 10.3390/rs10081245 Authors: Mehrez Zribi Erwan Motte Nicolas Baghdadi Frédéric Baup Sylvia Dayau Pascal Fanise Dominique Guyon Mireille Huc Jean Pierre Wigneron The aim of this study is to analyze the sensitivity of airborne Global Navigation Satellite System Reflectometry (GNSS-R) on soil surface and vegetation cover characteristics in agricultural areas. Airborne polarimetric GNSS-R data were acquired in the context of the GLORI’2015 campaign over two study sites in Southwest France in June and July of 2015. Ground measurements of soil surface parameters (moisture content) and vegetation characteristics (leaf area index (LAI), and vegetation height) were recorded for different types of crops (corn, sunflower, wheat, soybean, vegetable) simultaneously with the airborne GNSS-R measurements. Three GNSS-R observables (apparent reflectivity, the reflected signal-to-noise-ratio (SNR), and the polarimetric ratio (PR)) were found to be well correlated with soil moisture and a major vegetation characteristic (LAI). A tau-omega model was used to explain the dependence of the GNSS-R reflectivity on both the soil moisture and vegetation parameters.

Description: Remote Sensing, Vol. 10, Pages 1249: Canopy Hyperspectral Sensing of Paddy Fields at the Booting Stage and PLS Regression can Assess Grain Yield Remote Sensing doi: 10.3390/rs10081249 Authors: Kensuke Kawamura Hiroshi Ikeura Sengthong Phongchanmaixay Phanthasin Khanthavong Canopy hyperspectral (HS) sensing is a promising tool for estimating rice (Oryza sativa L.) yield. However, the timing of HS measurements is crucial for assessing grain yield prior to harvest because rice growth stages strongly influence the sensitivity to different wavelengths and the evaluation performance. To clarify the optimum growth stage for HS sensing-based yield assessments, the grain yield of paddy fields during the reproductive phase to the ripening phase was evaluated from field HS data in conjunction with iterative stepwise elimination partial least squares (ISE-PLS) regression. The field experiments involved three different transplanting dates (12 July, 26 July, and 9 August) in 2017 for six cultivars with three replicates (n = 3 × 6 × 3 = 54). Field HS measurements were performed on 2 October 2017, during the panicle initiation, booting, and ripening growth stages. The predictive accuracy of ISE-PLS was compared with that of the standard full-spectrum PLS (FS-PLS) via coefficient of determination (R2) values and root mean squared errors of cross-validation (RMSECV), and the robustness was evaluated by the residual predictive deviation (RPD). Compared with the FS-PLS models, the ISE-PLS models exhibited higher R2 values and lower RMSECV values for all data sets. Overall, the highest R2 values and the lowest RMSECV values were obtained from the ISE-PLS model at the booting stage (R2 = 0.873, RMSECV = 22.903); the RPD was >2.4. Selected HS wavebands in the ISE-PLS model were identified in the red-edge (710–740 nm) and near-infrared (830 nm) regions. Overall, these results suggest that the booting stage might be the best time for in-season rice grain assessment and that rice yield could be evaluated accurately from the HS sensing data via the ISE-PLS model.

Description: Remote Sensing, Vol. 10, Pages 1246: Efficient SfM for Oblique UAV Images: From Match Pair Selection to Geometrical Verification Remote Sensing doi: 10.3390/rs10081246 Authors: San Jiang Wanshou Jiang Accurate orientation is required for the applications of UAV (Unmanned Aerial Vehicle) images. In this study, an integrated Structure from Motion (SfM) solution is proposed, which aims to address three issues to ensure the efficient and reliable orientation of oblique UAV images, including match pair selection for large-volume images with large overlap degree, reliable feature matching of images captured from varying directions, and efficient geometrical verification of initial matches. By using four datasets captured with different oblique imaging systems, the proposed SfM solution is comprehensively compared and analyzed. The results demonstrate that linear computational costs can be achieved in feature extraction and matching; although high decrease ratios occur in image pairs, reliable orientation results are still obtained from both the relative and absolute bundle adjustment (BA) tests when compared with other software packages. For the orientation of oblique UAV images, the proposed method can be an efficient and reliable solution.

Description: Algorithms, Vol. 11, Pages 121: Stacked-GRU Based Power System Transient Stability Assessment Method Algorithms doi: 10.3390/a11080121 Authors: Feilai Pan Jun Li Bendong Tan Ciling Zeng Xinfan Jiang Li Liu Jun Yang With the interconnection between large power grids, the issue of security and stability has become increasingly prominent. At present, data-driven power system adaptive transient stability assessment methods have achieved excellent performances by balancing speed and accuracy, but the complicated construction and parameters are difficult to obtain. This paper proposes a stacked-GRU (Gated Recurrent Unit)-based transient stability intelligent assessment method, which builds a stacked-GRU model based on time-dependent parameter sharing and spatial stacking. By using the time series data after power system failure, the offline training is performed to obtain the optimal parameters of stacked-GRU. When the application is online, it is assessed by framework of confidence. Basing on New England power system, the performance of proposed adaptive transient stability assessment method is investigated. Simulation results show that the proposed model realizes reliable and accurate assessment of transient stability and it has the advantages of short assessment time with less complex model structure to leave time for emergency control.

Description: Remote Sensing, Vol. 10, Pages 1253: Automated Cobble Mapping of a Mixed Sand-Cobble Beach Using a Mobile LiDAR System Remote Sensing doi: 10.3390/rs10081253 Authors: Hironori Matsumoto Adam P. Young Cobbles (64–256 mm) are found on beaches throughout the world, influence beach morphology, and can provide shoreline stability. Detailed, frequent, and spatially large-scale quantitative cobble observations at beaches are vital toward a better understanding of sand-cobble beach systems. This study used a truck-mounted mobile terrestrial LiDAR system and a raster-based classification approach to map cobbles automatically. Rasters of LiDAR intensity, intensity deviation, topographic roughness, and slope were utilized for cobble classification. Four machine learning techniques including maximum likelihood, decision tree, support vector machine, and k-nearest neighbors were tested on five raster resolutions ranging from 5–50 cm. The cobble mapping capability varied depending on pixel size, classification technique, surface cobble density, and beach setting. The best performer was a maximum likelihood classification using 20 cm raster resolution. Compared to manual mapping at 15 control sites (size ranging from a few to several hundred square meters), automated mapping errors were <12% (best fit line). This method mapped the spatial location of dense cobble regions more accurately compared to sparse and moderate density cobble areas. The method was applied to a ~40 km section of coast in southern California, and successfully generated temporal and spatial cobble distributions consistent with previous observations.

Description: Remote Sensing, Vol. 10, Pages 1251: Land Cover Change Detection Using Multiple Shape Parameters of Spectral and NDVI Curves Remote Sensing doi: 10.3390/rs10081251 Authors: Boyu Liu Jun Chen Jiage Chen Weiwei Zhang Spectral and NDVI values have been used to calculate the change magnitudes of land cover, but may result in many pseudo-changes because of inter-class variance. Recently, the shape information of spectral or NDVI curves such as direction, angle, gradient, or other mathematical indicators have been used to improve the accuracy of land cover change detection. However, these measurements, in terms of the single shape features, can hardly capture the complete trends of curves affected by the unsynchronized phenology. Therefore, the calculated change magnitudes are indistinct such that changes and no-changes have a low contrast. This problem has prevented traditional change detection methods from achieving a higher accuracy using bi-temporal images or NDVI time series. In this paper, a multiple shape parameters-based change detection method is proposed by combining the spectral correlation operator and the shape features of NDVI temporal curves (phase angle cumulant, baseline cumulant, relative cumulation rate, and zero-crossing rate). The change magnitude is derived by integrating all the inter-annual differences of these shape parameters. The change regions are discriminated by an automated threshold selection method known as histogram concavity analysis. The results showed that the mean differences in the change magnitudes of the proposed method between 2100 changed and 2523 unchanged pixels was 32%, the overall accuracy was approximately 88%, and the kappa coefficient was 0.76. A comparative analysis was conducted with bi-temporal image-based methods and NDVI time series-based methods, and we demonstrate that the proposed method is more effective and robust than traditional methods in achieving high-contrast change magnitudes and accuracy.

Description: Remote Sensing, Vol. 10, Pages 1252: Application of Ensemble-Based Machine Learning Models to Landslide Susceptibility Mapping Remote Sensing doi: 10.3390/rs10081252 Authors: Prima Riza Kadavi Chang-Wook Lee Saro Lee The main purpose of this study was to produce landslide susceptibility maps using various ensemble-based machine learning models (i.e., the AdaBoost, LogitBoost, Multiclass Classifier, and Bagging models) for the Sacheon-myeon area of South Korea. A landslide inventory map including a total of 762 landslides was compiled based on reports and aerial photograph interpretations. The landslides were randomly separated into two datasets: 70% of landslides were selected for the model establishment and 30% were used for validation purposes. Additionally, 20 landslide condition factors divided into five categories (topographic factors, hydrological factors, soil map, geological map, and forest map) were considered in the landslide susceptibility mapping. The relationships among landslide occurrence and landslide conditioning factors were analyzed and the landslide susceptibility maps were calculated and drawn using the AdaBoost, LogitBoost, Multiclass Classifier, and Bagging models. Finally, the maps were validated using the area under the curve (AUC) method. The Multiclass Classifier method had higher prediction accuracy (85.9%) than the Bagging (AUC = 85.4%), LogitBoost (AUC = 84.8%), and AdaBoost (84.0%) methods.

Description: Remote Sensing, Vol. 10, Pages 1262: Land Surface Albedo Derived on a Ten Daily Basis from Meteosat Second Generation Observations: The NRT and Climate Data Record Collections from the EUMETSAT LSA SAF Remote Sensing doi: 10.3390/rs10081262 Authors: Dominique Carrer Suman Moparthy Gabriel Lellouch Xavier Ceamanos Florian Pinault Sandra C. Freitas Isabel F. Trigo Land surface albedo determines the splitting of downwelling solar radiation into components which are either reflected back to the atmosphere or absorbed by the surface. Land surface albedo is an important variable for the climate community, and therefore was defined by the Global Climate Observing System (GCOS) as an Essential Climate Variable (ECV). Within the scope of the Satellite Application Facility for Land Surface Analysis (LSA SAF) of EUMETSAT (European Organization for the Exploitation of Meteorological Satellites), a near-real time (NRT) daily albedo product was developed in the last decade from observations provided by the Spinning Enhanced Visible and Infrared Imager (SEVIRI) instrument on board the geostationary satellites of the Meteosat Second Generation (MSG) series. In this study we present a new collection of albedo satellite products based on the same satellite data. The MSG Ten-day Albedo (MTAL) product incorporates MSG observations over 31 days with a frequency of NRT production of 10 days. The MTAL collection is more dedicated to climate analysis studies compared to the daily albedo that was initially designed for the weather prediction community. For this reason, a homogeneous reprocessing of MTAL was done in 2018 to generate a climate data record (CDR). The resulting product is called MTAL-R and has been made available to the community in addition to the NRT version of the MTAL product which has been available for several years. The retrieval algorithm behind the MTAL products comprises three distinct modules: One for atmospheric correction, one for daily inversion of a semi-empirical model of the bidirectional reflectance distribution function, and one for monthly composition, that also determines surface albedo values. In this study the MTAL-R CDR is compared to ground surface measurements and concomitant albedo products collected by sensors on-board polar-orbiting satellites (SPOT-VGT and MODIS). We show that MTAL-R meets the quality requirements if MODIS or SPOT-VGT are considered as reference. This work leads to 14 years of production of geostationary land surface albedo products with a guaranteed continuity in the LSA SAF for the future years with the forthcoming third generation of European geostationary satellites.

Description: Remote Sensing, Vol. 10, Pages 1259: Direct Instantaneous Frequency Rate Estimation to Improve the Carrier Estimation Performance in Mars Entry, Descent, and Landing Flight Remote Sensing doi: 10.3390/rs10081259 Authors: Wanhong Hao Xiaowei Cui Jianguang Feng Guangliang Dong Zhiyong Zhu This paper focuses on the carrier estimation performance improvement in Mars entry, descent, and landing (EDL) flights. Carrier reconstruction could be used for trajectory derivation and Martian atmosphere profile inversion, and is the critical information for mission operations, as it helps determine the flight status of the spacecraft, demodulate the downlink information. The current approach is maximum likelihood estimation based on a two-dimensional (2D) maximum energy search algorithm, which computes the grid energy over all the combinations of frequency cells and frequency rate cells among the search space. Although it has good performance on robust estimation, the frequency estimation accuracy is limited due to the short coherent integration. An instantaneous frequency rate tracking approach based on the cubic phase function (CPF) is proposed that directly estimates the instantaneous frequency rate over the frequency rate cells, followed by the frequency estimation among the frequency cells. A sequential estimation method is introduced to propose the sequential CPF statistics, which uses the a priori Doppler phase information to suppress the noise squaring loss inherent in the standard CPF statistics. Simulations have been made on the released Mars Science Laboratory EDL trajectory for the two approaches, which show that considerable estimation improvement has been achieved for aerobraking flight by the new algorithm.

Description: Remote Sensing, Vol. 10, Pages 1258: Advancing Precipitation Estimation and Streamflow Simulations in Complex Terrain with X-Band Dual-Polarization Radar Observations Remote Sensing doi: 10.3390/rs10081258 Authors: Marios Anagnostou Efthymios Nikolopoulos John Kalogiros Emmanouil Anagnostou Francesco Marra Elisabeth Mair Giacomo Bertoldi Ulrike Tappeiner Marco Borga In mountain basins, the use of long-range operational weather radars is often associated with poor quantitative precipitation estimation due to a number of challenges posed by the complexity of terrain. As a result, the applicability of radar-based precipitation estimates for hydrological studies is often limited over areas that are in close proximity to the radar. This study evaluates the advantages of using X-band polarimetric (XPOL) radar as a means to fill the coverage gaps and improve complex terrain precipitation estimation and associated hydrological applications based on a field experiment conducted in an area of Northeast Italian Alps characterized by large elevation differences. The corresponding rainfall estimates from two operational C-band weather radar observations are compared to the XPOL rainfall estimates for a near-range (10–35 km) mountainous basin (64 km2). In situ rainfall observations from a dense rain gauge network and two disdrometers (a 2D-video and a Parsivel) are used for ground validation of the radar-rainfall estimates. Ten storm events over a period of two years are used to explore the differences between the locally deployed XPOL vs. longer-range operational radar-rainfall error statistics. Hourly aggregate rainfall estimates by XPOL, corrected for rain-path attenuation and vertical reflectivity profile, exhibited correlations between 0.70 and 0.99 against reference rainfall data and 21% mean relative error for rainfall rates above 0.2 mm h−1. The corresponding metrics from the operational radar-network rainfall products gave a strong underestimation (50–70%) and lower correlations (0.48–0.81). For the two highest flow-peak events, a hydrological model (Kinematic Local Excess Model) was forced with the different radar-rainfall estimations and in situ rain gauge precipitation data at hourly resolution, exhibiting close agreement between the XPOL and gauge-based driven runoff simulations, while the simulations obtained by the operational radar rainfall products resulted in a greatly underestimated runoff response.

Description: Algorithms, Vol. 11, Pages 122: Efficient Model-Based Object Pose Estimation Based on Multi-Template Tracking and PnP Algorithms Algorithms doi: 10.3390/a11080122 Authors: Chi-Yi Tsai Kuang-Jui Hsu Humaira Nisar Three-Dimensional (3D) object pose estimation plays a crucial role in computer vision because it is an essential function in many practical applications. In this paper, we propose a real-time model-based object pose estimation algorithm, which integrates template matching and Perspective-n-Point (PnP) pose estimation methods to deal with this issue efficiently. The proposed method firstly extracts and matches keypoints of the scene image and the object reference image. Based on the matched keypoints, a two-dimensional (2D) planar transformation between the reference image and the detected object can be formulated by a homography matrix, which can initialize a template tracking algorithm efficiently. Based on the template tracking result, the correspondence between image features and control points of the Computer-Aided Design (CAD) model of the object can be determined efficiently, thus leading to a fast 3D pose tracking result. Finally, the 3D pose of the object with respect to the camera is estimated by a PnP solver based on the tracked 2D-3D correspondences, which improves the accuracy of the pose estimation. Experimental results show that the proposed method not only achieves real-time performance in tracking multiple objects, but also provides accurate pose estimation results. These advantages make the proposed method suitable for many practical applications, such as augmented reality.

Description: Remote Sensing, Vol. 10, Pages 1273: Colour Classification of 1486 Lakes across a Wide Range of Optical Water Types Remote Sensing doi: 10.3390/rs10081273 Authors: Moritz K. Lehmann Uyen Nguyen Mathew Allan Hendrik Jan van der Woerd Remote sensing by satellite-borne sensors presents a significant opportunity to enhance the spatio-temporal coverage of environmental monitoring programmes for lakes, but the estimation of classic water quality attributes from inland water bodies has not reached operational status due to the difficulty of discerning the spectral signatures of optically active water constituents. Determination of water colour, as perceived by the human eye, does not require knowledge of inherent optical properties and therefore represents a generally applicable remotely-sensed water quality attribute. In this paper, we implemented a recent algorithm for the retrieval of colour parameters (hue angle, dominant wavelength) and derived a new correction for colour purity to account for the spectral bandpass of the Landsat 8 Operational Land Imager (OLI). We used this algorithm to calculate water colour on almost 45,000 observations over four years from 1486 lakes from a diverse range of optical water types in New Zealand. We show that the most prevalent lake colours are yellow-orange and blue, respectively, while green observations are comparatively rare. About 40% of the study lakes show transitions between colours at a range of time scales, including seasonal. A preliminary exploratory analysis suggests that both geo-physical and anthropogenic factors, such as catchment land use, provide environmental control of lake colour and are promising avenues for future analysis.

Description: Remote Sensing, Vol. 10, Pages 1274: A Performance Evaluation of a Geo-Spatial Image Processing Service Based on Open Source PaaS Cloud Computing Using Cloud Foundry on OpenStack Remote Sensing doi: 10.3390/rs10081274 Authors: Kiwon Lee Kwangseob Kim Recently, web application services based on cloud computing technologies are being offered. In the web-based application field of geo-spatial data management or processing, data processing services are produced or operated using various information communication technologies. Platform-as-a-Service (PaaS) is a type of cloud computing service model that provides a platform that allows service providers to implement, execute, and manage applications without the complexity of establishing and maintaining the lower-level infrastructure components, typically related to application development and launching. There are advantages, in terms of cost-effectiveness and service development expansion, of applying non-proprietary PaaS cloud computing. Nevertheless, there have not been many studies on the use of PaaS technologies to build geo-spatial application services. This study was based on open source PaaS technologies used in a geo-spatial image processing service, and it aimed to evaluate the performance of that service in relation to the Web Processing Service (WPS) 2.0 specification, based on the Open Geospatial Consortium (OGC) after a test application deployment using the configured service supported by a cloud environment. Using these components, the performance of an edge extraction algorithm on the test system in three cases, of 300, 500, and 700 threads, was assessed through a comparison test with another test system, in the same three cases, using Infrastructure-as-a-Service (IaaS) without Load Balancer-as-a-Service (LBaaS). According to the experiment results, in all the test cases of WPS execution considered in this study, the PaaS-based geo-spatial service had a greater performance and lower error rates than the IaaS-based cloud without LBaaS.

Description: Remote Sensing, Vol. 10, Pages 1272: Mapping Damage-Affected Areas after Natural Hazard Events Using Sentinel-1 Coherence Time Series Remote Sensing doi: 10.3390/rs10081272 Authors: Stephanie Olen Bodo Bookhagen The emergence of the Sentinel-1A and 1B satellites now offers freely available and widely accessible Synthetic Aperture Radar (SAR) data. Near-global coverage and rapid repeat time (6–12 days) gives Sentinel-1 data the potential to be widely used for monitoring the Earth’s surface. Subtle land-cover and land surface changes can affect the phase and amplitude of the C-band SAR signal, and thus the coherence between two images collected before and after such changes. Analysis of SAR coherence therefore serves as a rapidly deployable and powerful tool to track both seasonal changes and rapid surface disturbances following natural disasters. An advantage of using Sentinel-1 C-band radar data is the ability to easily construct time series of coherence for a region of interest at low cost. In this paper, we propose a new method for Potentially Affected Area (PAA) detection following a natural hazard event. Based on the coherence time series, the proposed method (1) determines the natural variability of coherence within each pixel in the region of interest, accounting for factors such as seasonality and the inherent noise of variable surfaces; and (2) compares pixel-by-pixel syn-event coherence to temporal coherence distributions to determine where statistically significant coherence loss has occurred. The user can determine to what degree the syn-event coherence value (e.g., 1st, 5th percentile of pre-event distribution) constitutes a PAA, and integrate pertinent regional data, such as population density, to rank and prioritise PAAs. We apply the method to two case studies, Sarpol-e, Iran following the 2017 Iran-Iraq earthquake, and a landslide-prone region of NW Argentina, to demonstrate how rapid identification and interpretation of potentially affected areas can be performed shortly following a natural hazard event.

Description: Future Internet, Vol. 10, Pages 81: Interactive 3D Exploration of RDF Graphs through Semantic Planes Future Internet doi: 10.3390/fi10080081 Authors: Fabio Viola Luca Roffia Francesco Antoniazzi Alfredo D’Elia Cristiano Aguzzi Tullio Salmon Cinotti This article presents Tarsier, a tool for the interactive 3D visualization of RDF graphs. Tarsier is mainly intended to support teachers introducing students to Semantic Web data representation formalisms and developers in the debugging of applications based on Semantic Web knowledge bases. The tool proposes the metaphor of semantic planes as a way to visualize an RDF graph. A semantic plane contains all the RDF terms sharing a common concept; it can be created, and further split into several planes, through a set of UI controls or through SPARQL 1.1 queries, with the full support of OWL and RDFS. Thanks to the 3D visualization, links between semantic planes can be highlighted and the user can navigate within the 3D scene to find the better perspective to analyze data. Data can be gathered from generic SPARQL 1.1 protocol services. We believe that Tarsier will enhance the human friendliness of semantic technologies by: (1) helping newcomers assimilate new data representation formats; and (2) increasing the capabilities of inspection to detect relevant situations even in complex RDF graphs.

Description: Future Internet, Vol. 10, Pages 80: A Fast and Lightweight Method with Feature Fusion and Multi-Context for Face Detection Future Internet doi: 10.3390/fi10080080 Authors: Lei Zhang Xiaoli Zhi Convolutional neural networks (CNN for short) have made great progress in face detection. They mostly take computation intensive networks as the backbone in order to obtain high precision, and they cannot get a good detection speed without the support of high-performance GPUs (Graphics Processing Units). This limits CNN-based face detection algorithms in real applications, especially in some speed dependent ones. To alleviate this problem, we propose a lightweight face detector in this paper, which takes a fast residual network as backbone. Our method can run fast even on cheap and ordinary GPUs. To guarantee its detection precision, multi-scale features and multi-context are fully exploited in efficient ways. Specifically, feature fusion is used to obtain semantic strongly multi-scale features firstly. Then multi-context including both local and global context is added to these multi-scale features without extra computational burden. The local context is added through a depthwise separable convolution based approach, and the global context by a simple global average pooling way. Experimental results show that our method can run at about 110 fps on VGA (Video Graphics Array)-resolution images, while still maintaining competitive precision on WIDER FACE and FDDB (Face Detection Data Set and Benchmark) datasets as compared with its state-of-the-art counterparts.

Description: Remote Sensing, Vol. 10, Pages 1308: Multispectral Pansharpening with Radiative Transfer-Based Detail-Injection Modeling for Preserving Changes in Vegetation Cover Remote Sensing doi: 10.3390/rs10081308 Authors: Andrea Garzelli Bruno Aiazzi Luciano Alparone Simone Lolli Gemine Vivone Whenever vegetated areas are monitored over time, phenological changes in land cover should be decoupled from changes in acquisition conditions, like atmospheric components, Sun and satellite heights and imaging instrument. This especially holds when the multispectral (MS) bands are sharpened for spatial resolution enhancement by means of a panchromatic (Pan) image of higher resolution, a process referred to as pansharpening. In this paper, we provide evidence that pansharpening of visible/near-infrared (VNIR) bands takes advantage of a correction of the path radiance term introduced by the atmosphere, during the fusion process. This holds whenever the fusion mechanism emulates the radiative transfer model ruling the acquisition of the Earth’s surface from space, that is for methods exploiting a multiplicative, or contrast-based, injection model of spatial details extracted from the panchromatic (Pan) image into the interpolated multispectral (MS) bands. The path radiance should be estimated and subtracted from each band before the product by Pan is accomplished. Both empirical and model-based estimation techniques of MS path radiances are compared within the framework of optimized algorithms. Simulations carried out on two GeoEye-1 observations of the same agricultural landscape on different dates highlight that the de-hazing of MS before fusion is beneficial to an accurate detection of seasonal changes in the scene, as measured by the normalized differential vegetation index (NDVI).

Description: Remote Sensing, Vol. 10, Pages 1300: Targeted Grassland Monitoring at Parcel Level Using Sentinels, Street-Level Images and Field Observations Remote Sensing doi: 10.3390/rs10081300 Authors: Raphaël d’Andrimont Guido Lemoine Marijn van der Velde The introduction of high-resolution Sentinels combined with the use of high-quality digital agricultural parcel registration systems is driving the move towards at-parcel agricultural monitoring. The European Union’s Common Agricultural Policy (CAP) has introduced the concept of CAP monitoring to help simplify the management and control of farmers’ parcel declarations for area support measures. This study proposes a proof of concept of this monitoring approach introducing and applying the concept of ‘markers’. Using Sentinel-1- and -2-derived (S1 and S2) markers, we evaluate parcels declared as grassland in the Gelderse Vallei in the Netherlands covering more than 15,000 parcels. The satellite markers—respectively based on crop-type deep learning classification using S1 backscattering and coherence data and on detecting bare soil with S2 during the growing season—aim to identify grassland-declared parcels for which (1) the marker suggests another crop type or (2) which appear to have been ploughed during the year. Subsequently, a field-survey was carried out in October 2017 to target the parcels identified and to build a relevant ground-truth sample of the area. For the latter purpose, we used a high-definition camera mounted on the roof of a car to continuously sample geo-tagged digital imagery, as well as an app-based approach to identify the targeted fields. Depending on which satellite-based marker or combination of markers is used, the number of parcels identified ranged from 2.57% (marked by both the S1 and S2 markers) to 17.12% of the total of 11,773 parcels declared as grassland. After confirming with the ground-truth, parcels flagged by the combined S1 and S2 marker were robustly detected as non-grassland parcels (F-score = 0.9). In addition, the study demonstrated that street-level imagery collection could improve collection efficiency by a factor seven compared to field visits (1411 parcels/day vs. 217 parcels/day) while keeping an overall accuracy of about 90% compared to the ground-truth. This proposed way of collecting in situ data is suitable for the training and validating of high resolution remote sensing approaches for agricultural monitoring. Timely country-wide wall-to-wall parcel-level monitoring and targeted in-season parcel surveying will increase the efficiency and effectiveness of monitoring and implementing agricultural policies.

Description: Remote Sensing, Vol. 10, Pages 1315: Difference and Potential of the Upward and Downward Sun-Induced Chlorophyll Fluorescence on Detecting Leaf Nitrogen Concentration in Wheat Remote Sensing doi: 10.3390/rs10081315 Authors: Min Jia Jie Zhu Chunchen Ma Luis Alonso Dong Li Tao Cheng Yongchao Tian Yan Zhu Xia Yao Weixing Cao Precise detection of leaf nitrogen concentration (LNC) is helpful for nutrient diagnosis and fertilization guidance in farm crops. Numerous researchers have estimated LNC with techniques based on reflectance spectra or active chlorophyll fluorescence, which have limitations of low accuracy or small scale in the field. Given the correlation between chlorophyll and nitrogen contents, the response of sun-induced chlorophyll fluorescence (SIF) to chlorophyll (Chl) content reported in a few papers suggests the feasibility of quantifying LNC using SIF. Few studies have investigated the difference and power of the upward and downward SIF components on monitoring LNC in winter wheat. We conducted two field experiments to evaluate the capacity of SIF to monitor the LNC of winter wheat during the entire growth season and compare the differences of the upward and downward SIF for LNC detection. A FluoWat leaf clip coupled with a ASD spectrometer was used to measure the upward and downward SIF under sunlight. It was found that three (↓FY687, ↑FY687/↑FY739, and ↓FY687/↓FY739) out of the six SIF yield (FY) indices examined were significantly correlated to the LNC (R2 = 0.6, 0.51, 0.75, respectively). The downward SIF yield indices exhibited better performance than the upward FY indices in monitoring the LNC with the ↓FY687/↓FY739 being the best FY index. Moreover, the LNC models based on the three SIF yield indices are insensitive to the chlorophyll content and the leaf mass per area (LMA). These findings suggest the downward SIF should not be neglected for monitoring crop LNC at the leaf scale, although it is more difficult to measure with current instruments. The downward SIF could play an increasingly important role in understanding of the SIF emission for LNC detection at different scales. These results could provide a solid foundation for elucidating the mechanism of SIF for LNC estimation at the canopy scale.

Description: Remote Sensing, Vol. 10, Pages 1316: Evaluation of Five Satellite-Based Precipitation Products in Two Gauge-Scarce Basins on the Tibetan Plateau Remote Sensing doi: 10.3390/rs10081316 Authors: Peng Bai Xiaomang Liu The sparse rain gauge networks over the Tibetan Plateau (TP) cause challenges for hydrological studies and applications. Satellite-based precipitation datasets have the potential to overcome the issues of data scarcity caused by sparse rain gauges. However, large uncertainties usually exist in these precipitation datasets, particularly in complex orographic areas, such as the TP. The accuracy of these precipitation products needs to be evaluated before being practically applied. In this study, five (quasi-)global satellite precipitation products were evaluated in two gauge-sparse river basins on the TP during the period 1998–2012; the evaluated products are CHIRPS, CMORPH, PERSIANN-CDR, TMPA 3B42, and MSWEP. The five precipitation products were first intercompared with each other to identify their consistency in depicting the spatial–temporal distribution of precipitation. Then, the accuracy of these products was validated against precipitation observations from 21 rain gauges using a point-to-pixel method. We also investigated the streamflow simulation capacity of these products via a distributed hydrological model. The results indicated that these precipitation products have similar spatial patterns but significantly different precipitation estimates. A point-to-pixel validation indicated that all products cannot efficiently reproduce the daily precipitation observations, with the median Kling–Gupta efficiency (KGE) in the range of 0.10–0.26. Among the five products, MSWEP has the best consistency with the gauge observations (with a median KGE = 0.26), which is thus recommended as the preferred choice for applications among the five satellite precipitation products. However, as model forcing data, all the precipitation products showed a comparable capacity of streamflow simulations and were all able to accurately reproduce the observed streamflow records. The values of the KGE obtained from these precipitation products exceed 0.83 in the upper Yangtze River (UYA) basin and 0.84 in the upper Yellow River (UYE) basin. Thus, evaluation of precipitation products only focusing on the accuracy of streamflow simulations is less meaningful, which will mask the differences between these products. A further attribution analysis indicated that the influences of the different precipitation inputs on the streamflow simulations were largely offset by the parameter calibration, leading to significantly different evaporation and water storage estimates. Therefore, an efficient hydrological evaluation for precipitation products should focus on both streamflow simulations and the simulations of other hydrological variables, such as evaporation and soil moisture.

Description: Remote Sensing, Vol. 10, Pages 1341: Assessment of Aquarius Sea Surface Salinity Remote Sensing doi: 10.3390/rs10091341 Authors: Hsun-Ying Kao Gary S. E. Lagerloef Tong Lee Oleg Melnichenko Thomas Meissner Peter Hacker Aquarius was the first NASA satellite to observe the sea surface salinity (SSS) over the global ocean. The mission successfully collected data from 25 August 2011 to 7 June 2015. The Aquarius project released its final version (Version-5) of the SSS data product in December 2017. The purpose of this paper is to summarize the validation results from the Aquarius Validation Data System (AVDS) and other statistical methods, and to provide a general view of the Aquarius SSS quality to the users. The results demonstrate that Aquarius has met the mission target measurement accuracy requirement of 0.2 psu on monthly averages on 150 km scale. From the triple point analysis using Aquarius, in situ field and Hybrid Coordinate Ocean Model (HYCOM) products, the root mean square errors of Aquarius Level-2 and Level-3 data are estimated to be 0.17 psu and 0.13 psu, respectively. It is important that caution should be exercised when using Aquarius salinity data in areas with high radio frequency interference (RFI) and heavy rainfall, close to the coast lines where leakage of land signals may significantly affect the quality of the SSS data, and at high-latitude oceans where the L-band radiometer has poor sensitivity to SSS.

Description: Remote Sensing, Vol. 10, Pages 1339: ERN: Edge Loss Reinforced Semantic Segmentation Network for Remote Sensing Images Remote Sensing doi: 10.3390/rs10091339 Authors: Shuo Liu Wenrui Ding Chunhui Liu Yu Liu Yufeng Wang Hongguang Li The semantic segmentation of remote sensing images faces two major challenges: high inter-class similarity and interference from ubiquitous shadows. In order to address these issues, we develop a novel edge loss reinforced semantic segmentation network (ERN) that leverages the spatial boundary context to reduce the semantic ambiguity. The main contributions of this paper are as follows: (1) we propose a novel end-to-end semantic segmentation network for remote sensing, which involves multiple weighted edge supervisions to retain spatial boundary information; (2) the main representations of the network are shared between the edge loss reinforced structures and semantic segmentation, which means that the ERN simultaneously achieves semantic segmentation and edge detection without significantly increasing the model complexity; and (3) we explore and discuss different ERN schemes to guide the design of future networks. Extensive experimental results on two remote sensing datasets demonstrate the effectiveness of our approach both in quantitative and qualitative evaluation. Specifically, the semantic segmentation performance in shadow-affected regions is significantly improved.

Description: Remote Sensing, Vol. 10, Pages 1338: A Forest Attribute Mapping Framework: A Pilot Study in a Northern Boreal Forest, Northwest Territories, Canada Remote Sensing doi: 10.3390/rs10091338 Authors: Craig Mahoney Ron J. Hall Chris Hopkinson Michelle Filiatrault Andre Beaudoin Qi Chen A methods framework is presented that utilizes field plots, airborne light detection and ranging (LiDAR), and spaceborne Geoscience Laser Altimeter System (GLAS) data to estimate forest attributes over a 20 Mha area in Northern Canada. The framework was implemented to scale up forest attribute models from field data to intersecting airborne LiDAR data, and then to GLAS footprints. GLAS data were sequentially filtered and submitted to the k-nearest neighbour (k-NN) imputation algorithm to yield regional estimates of stand height and crown closure at a 30 m resolution. Resulting outputs were assessed against independent airborne LiDAR data to evaluate regional estimates of stand height (mean difference = −1 m, RMSE = 5 m) and crown closure (mean difference = −5%, RMSE = 9%). Additional assessments were performed as a function of dominant vegetation type and ecoregion to further evaluate regional products. These attributes form the primary descriptive structure attributes that are typical of forest inventory mapping programs, and provide insight into how they can be derived in northern boreal regions where field information and physical access is often limited.

Description: Remote Sensing, Vol. 10, Pages 1337: Toward Long-Term Aquatic Science Products from Heritage Landsat Missions Remote Sensing doi: 10.3390/rs10091337 Authors: Nima Pahlevan Sundarabalan V. Balasubramanian Sudipta Sarkar Bryan A. Franz This paper aims at generating a long-term consistent record of Landsat-derived remote sensing reflectance (Rrs) products, which are central for producing downstream aquatic science products (e.g., concentrations of total suspended solids). The products are derived from Landsat-5 and Landsat-7 observations leading to Landsat-8 era to enable retrospective analyses of inland and nearshore coastal waters. In doing so, the data processing was built into the SeaWiFS Data Analysis System (SeaDAS) followed by vicariously calibrating Landsat-7 and -5 data using reference in situ measurements and near-concurrent ocean color products, respectively. The derived Rrs products are then validated using (a) matchups using the Aerosol Robotic Network (AERONET) data measured by in situ radiometers, i.e., AERONET-OC, and (b) ocean color products at select sites in North America. Following the vicarious calibration adjustments, it is found that the overall biases in Rrs products are significantly reduced. The root-mean-square errors (RMSE), however, indicate noticeable uncertainties due to random and systematic noise. Long-term (since 1984) seasonal Rrs composites over 12 coastal and inland systems are further evaluated to explore the utility of Landsat archive processed via SeaDAS. With all the qualitative and quantitative assessments, it is concluded that with careful algorithm developments, it is possible to discern natural variability in historic water quality conditions using heritage Landsat missions. This requires the changes in Rrs exceed maximum expected uncertainties, i.e., 0.0015 [1/sr], estimated from mean RMSEs associated with the matchups and intercomparison analyses. It is also anticipated that Landsat-5 products will be less susceptible to uncertainties in turbid waters with Rrs(660) > 0.004 [1/sr], which is equivalent of ~1.2% reflectance. Overall, end-users may utilize heritage Rrs products with “fitness-for-purpose” concept in mind, i.e., products could be valuable for one application but may not be viable for another. Further research should be dedicated to enhancing atmospheric correction to account for non-negligible near-infrared reflectance in CDOM-rich and extremely turbid waters.

Description: Remote Sensing, Vol. 10, Pages 1340: Observations and Recommendations for the Calibration of Landsat 8 OLI and Sentinel 2 MSI for Improved Data Interoperability Remote Sensing doi: 10.3390/rs10091340 Authors: Dennis Helder Brian Markham Ron Morfitt Jim Storey Julia Barsi Ferran Gascon Sebastien Clerc Bruno LaFrance Jeff Masek David P. Roy Adam Lewis Nima Pahlevan Combining data from multiple sensors into a single seamless time series, also known as data interoperability, has the potential for unlocking new understanding of how the Earth functions as a system. However, our ability to produce these advanced data sets is hampered by the differences in design and function of the various optical remote-sensing satellite systems. A key factor is the impact that calibration of these instruments has on data interoperability. To address this issue, a workshop with a panel of experts was convened in conjunction with the Pecora 20 conference to focus on data interoperability between Landsat and the Sentinel 2 sensors. Four major areas of recommendation were the outcome of the workshop. The first was to improve communications between satellite agencies and the remote-sensing community. The second was to adopt a collections-based approach to processing the data. As expected, a third recommendation was to improve calibration methodologies in several specific areas. Lastly, and the most ambitious of the four, was to develop a comprehensive process for validating surface reflectance products produced from the data sets. Collectively, these recommendations have significant potential for improving satellite sensor calibration in a focused manner that can directly catalyze efforts to develop data that are closer to being seamlessly interoperable.

Description: Remote Sensing, Vol. 10, Pages 1334: Land-Use Carbon Emissions Estimation for the Yangtze River Delta Urban Agglomeration Using 1994–2016 Landsat Image Data Remote Sensing doi: 10.3390/rs10091334 Authors: Yifan Cui Long Li Longqian Chen Yu Zhang Liang Cheng Xisheng Zhou Xiaoyan Yang The amount and growth rate of carbon emissions have been accelerated on a global scale since the industrial revolution (1800), especially in recent decades. This has resulted in a significant influence on the natural environment and human societies. Therefore, carbon emission reduction receives continuously increasing public attention and has long been under debate. In this study, we made use of the land-use specific carbon emission coefficients from previous studies and estimated the land-use carbon emissions and carbon intensities of the Yangtze River Delta Urban Agglomeration (YRDUA)—which consists of 26 eastern Chinese cities—from Landsat image data and socio-economic statistics in 1995, 2005, and 2015. In addition, spatial autocorrelation models including both global and local Moran’s I were used to analyze the spatial autocorrelation of carbon emissions and carbon intensities. It was found that (1) the YRDUA witnessed a rapidly increasing trend for net carbon emissions and a decreasing trend for carbon intensity over the two decades; (2) the spatial differences in carbon intensity had gradually narrowed, but were large in carbon emissions and had gradually increased; and (3) the carbon emissions in 2005 and 2015 had significant spatial autocorrelations. We concluded that (1) from 1995 to 2015 in the YRDUA, carbon emissions were large for the cities along the Yangtze River and carbon intensities were high for Anhui province’s resource-based cities, while both carbon emissions and carbon intensities were small for Zhejiang province’s cities; (2) over two decades, the increase in carbon emissions from urban land was approximately twice the increase in urban land area. Our study can provide useful insights into the assignment of carbon reduction tasks within the YRDUA.

Description: Remote Sensing, Vol. 10, Pages 1332: Numerical Analysis of Microwave Scattering from Layered Sea Ice Based on the Finite Element Method Remote Sensing doi: 10.3390/rs10091332 Authors: Xu Xu Camilla Brekke Anthony P. Doulgeris Frank Melandsø A two-dimensional scattering model based on the Finite Element Method (FEM) is built for simulating the microwave scattering of sea ice, which is a layered medium. The scattering problem solved by the FEM is formulated following a total- and scattered-field decomposition strategy. The model set-up is first validated with good agreements by comparing the results of the FEM with those of the small perturbation method and the method of moment. Subsequently, the model is applied to two cases of layered sea ice to study the effect of subsurface scattering. The first case is newly formed sea ice which has scattering from both air–ice and ice–water interfaces. It is found that the backscattering has a strong oscillation with the variation of sea ice thickness. The found oscillation effects can increase the difficulty of retrieving the thickness of newly formed sea ice from the backscattering data. The second case is first-year sea ice with C-shaped salinity profiles. The scattering model accounts for the variations in the salinity profile by approximating the profile as consisting of a number of homogeneous layers. It is found that the salinity profile variations have very little influence on the backscattering for both C- and L-bands. The results show that the sea ice can be considered to be homogeneous with a constant salinity value in modelling the backscattering and it is difficult to sense the salinity profile of sea ice from the backscattering data, because the backscattering is insensitive to the salinity profile.

Description: Remote Sensing, Vol. 10, Pages 1333: Assessment of MODIS, OMI, MISR and CALIOP Aerosol Products for Estimating Surface Visual Range: A Mathematical Model for Hong Kong Remote Sensing doi: 10.3390/rs10091333 Authors: Muhammad Imran Shahzad Janet Elizabeth Nichol James R. Campbell Man Sing Wong Estimation of atmospheric visibility (VR) using ground and satellite sensors is ineffective under Hong Kong’s complex atmosphere and climate. Therefore, the relationship between columnar Aerosol Optical Depth (AOD) from four space-borne sensors (OMI, MODIS, MISR and CALIOP) and Bext from two visibility-recording stations was evaluated, to recommend an effective satellite-based method and spatial resolution, for estimation of VR over Hong Kong. Since most column-integrated aerosol particle extinction occurs within a mixing layer height (MLH) of 1–3 km, column-based AOD from satellites is expected to give a good indication of surface-level conditions, especially when MLH is a known input. The AOD from both MODIS and MISR showed high correlations with Bext; therefore, both were subjected to rigorous statistical analysis along with climatic data to simulate visibility. The best estimate of ground visibility was obtained from MODIS AOD combined with surface-level climatic data, and this explained 84% of the variance in VR, with a low distance error of 0.27 km. Results suggest that the water vapor mixing ratio (Q) alone can explain the combined effect of Atmospheric Pressure (P), Temperature (T) and Relative Humidity (RH) on VR, and that the advection term (VT) alone is sufficient to explain the effects of T, WS and WD on dispersion of aerosols, and hence on VR.

Description: Remote Sensing, Vol. 10, Pages 1335: Improved MODIS-Aqua Chlorophyll-a Retrievals in the Turbid Semi-Enclosed Ariake Bay, Japan Remote Sensing doi: 10.3390/rs10091335 Authors: Meng Meng Yang Joji Ishizaka Joaquim I. Goes Helga do R. Gomes Elígio de Raús Maúre Masataka Hayashi Toshiya Katano Naoki Fujii Katsuya Saitoh Takayuki Mine Hirokazu Yamashita Naoki Fujii Akiko Mizuno The accurate retrieval of chlorophyll-a concentration (Chl-a) from ocean color satellite data is extremely challenging in turbid, optically complex coastal waters. Ariake Bay in Japan is a turbid semi-enclosed bay of great socio-economic significance, but it suffers from serious water quality problems, particularly due to red tide events. Chl-a derived from the MODerate resolution Imaging Spectroradiometer (MODIS) sensor on satellite Aqua in Ariake Bay was investigated, and it was determined that the causes of the errors were from inaccurate atmospheric correction and inappropriate in-water algorithms. To improve the accuracy of MODIS remote sensing reflectance (Rrs) in the blue and green bands, a simple method was adopted using in situ Rrs data. This method assumes that the error in MODIS Rrs(547) is small, and MODIS Rrs(412) can be estimated from MODIS Rrs(547) using a linear relation between in situ Rrs(412) and Rrs(547). We also showed that the standard MODIS Chl-a algorithm, OC3M, underestimated Chl-a, which was mostly due to water column turbidity. A new empirical switching algorithm was generated based on the relationship between in situ Chl-a and the blue-to-green band ratio, max(Rrs(443), Rrs(448)/Rrs(547), which was the same as the OC3M algorithm. The criterion of Rrs(667) of 0.005 sr−1 was used to evaluate the extent of turbidity for the switching algorithm. The results showed that the switching algorithm performed better than OC3M, and the root mean square error (RMSE) of estimated Chl-a decreased from 0.414 to 0.326. The RMSE for MODIS Chl-a using the recalculated Rrs and the switching algorithm was 0.287, which was a significant improvement from the RMSE of 0.610, which was obtained using standard MODIS Chl-a. Finally, the accuracy of our method was tested with an independent dataset collected by the local Fisheries Research Institute, and the results revealed that the switching algorithm with the recalculated Rrs reduced the RMSE of MODIS Chl-a from 0.412 of the standard to 0.335.

Description: Remote Sensing, Vol. 10, Pages 1326: How Long should the MISR Record Be when Evaluating Aerosol Optical Depth Climatology in Climate Models? Remote Sensing doi: 10.3390/rs10091326 Authors: Huikyo Lee Michael J. Garay Olga V. Kalashnikova Yan Yu Peter B. Gibson This study used the nearly continuous 17-year observation record from the Multi- angle Imaging SpectroRadiometer (MISR) instrument on the National Aeronautics and Space Administration (NASA) Terra Earth Observing System satellite to determine which temporal subsets are long enough to define statistically stable speciated aerosol optical depth (AOD) climatologies (i.e., AOD by particle types) for purposes of climate model evaluation. A random subsampling of seasonally averaged total and speciated AOD retrievals was performed to quantitatively assess the statistical stability in the climatology, represented by the minimum record length required for the standard deviation of the subsampled mean AODs to be less than a certain threshold. Our results indicate that the multi-year mean speciated AOD from MISR is stable on a global scale; however, there is substantial regional variability in the assessed stability. This implies that in some regions, even 17 years may not provide a long enough sample to define regional mean total and speciated AOD climatologies. We further investigated the agreement between the statistical stability of total AOD retrievals from MISR and the Moderate Resolution Imaging Spectroradiometer (MODIS), also on the NASA Terra satellite. The difference in the minimum record lengths between MISR and MODIS climatologies of total AOD is less than three years for most of the globe, with the exception of certain regions. Finally, we compared the seasonal cycles in the MISR total and speciated AODs with those simulated by three global chemistry transport models in the regions of climatologically stable speciated AODs. We found that only one model reproduced the observed seasonal cycles of the total and non-absorbing AODs over East China, but the seasonal cycles in total and dust AODs in all models are similar to those from MISR in Western Africa. This work provides a new method for considering the statistical stability of satellite-derived climatologies and illustrates the value of MISR’s speciated AOD data record for evaluating aerosols in global models.

Description: Remote Sensing, Vol. 10, Pages 1330: Noise Removal Based on Tensor Modelling for Hyperspectral Image Classification Remote Sensing doi: 10.3390/rs10091330 Authors: Salah Bourennane Caroline Fossati Tao Lin With the current state-of-the-art computer aided manufacturing tools, the spatial resolution of hyperspectral sensors is becoming increasingly higher thus making it easy to obtain much more detailed information of the scene captured. However, the improvement of the spatial resolution also brings new challenging problems to address with signal dependent photon noise being one of them. Unlike the signal independent thermal noise, the variance of photon noise is dependent on the signal, therefore many denoising methods developed for the stationary noise cannot be applied directly to the photon noise. To make things worse, both photon and thermal noise coexist in the captured hyperspectral image (HSI), thus making it more difficult to whiten noise. In this paper, we propose a new denoising framework to cope with signal dependent nonwhite noise (SDNW), Pre-estimate—Whitening—Post-estimate (PWP) loop, to reduce both photon and thermal noise in HSI. Previously, we proposed a method based on multidimensional wavelet packet transform and multi-way Wiener filter which performs both white noise and spectral dimensionality reduction, referred to as MWPT-MWF, which was restricted to white noise. We get inspired from this MWPT-MWF to develop a new iterative method for reducing photon and thermal noise. Firstly, the hyperspectral noise parameters estimation (HYNPE) algorithm is used to estimate the noise parameters, the SD noise is converted to an additive white Gaussian noise by pre-whitening procedure and then the whitened HSI is denoised by the proposed method SDNW-MWPT-MWF. As comparative experiments, the Multiple Linear Regression (MLR) based denoising method and tensor-based Multiway Wiener Filter (MWF) are also used in the denoising framework. An HSI captured by Reflective Optics System Imaging Spectrometer (ROSIS) is used in the experiments and the denoising performances are assessed from various aspects: the noise whitening performance, the Signal-to-Noise Ratio (SNR), and the classification performance. The results on the real-world airborne hyperspectral image HYDICE (Hyperspectral Digital Imagery Collection Experiment) are also presented and analyzed. These experiments show that it is worth taking into account noise signal-dependency hypothesis for processing HYDICE and ROSIS HSIs.

Description: Remote Sensing, Vol. 10, Pages 1327: Comparing the Performance of Neural Network and Deep Convolutional Neural Network in Estimating Soil Moisture from Satellite Observations Remote Sensing doi: 10.3390/rs10091327 Authors: Lingling Ge Renlong Hang Yi Liu Qingshan Liu Soil moisture (SM) plays an important role in hydrological cycle and weather forecasting. Satellite provides the only viable approach to regularly observe large-scale SM dynamics. Conventionally, SM is estimated from satellite observations based on the radiative transfer theory. Recent studies have demonstrated that the neural network (NN) method can retrieve SM with comparable accuracy as conventional methods. Here, we are interested in whether the NN model with more complex structures, namely deep convolutional neural network (DCNN), can bring about further improvement in SM retrievals when compared with the NN model used in recent studies. To achieve this objective, the same input data are used for the DCNN and NN models, including L-band Soil Moisture and Ocean Salinity (SMOS) brightness temperature (TB), C-band Advanced Scatterometer (ASCAT) backscattering coefficients, Moderate Resolution Imaging Spectroradiometer (MODIS) Normalized Difference Vegetation Index (NDVI) and soil temperature. The target SM used to train the DCNN and NN models is the European Center for Medium-range Weather Forecasts Re-Analysis Interim (ERA-Interim) product. The experiment consists of two phases: the learning phase from 1 January to 31 December 2015 and the testing phase from 1 January to 31 December 2016. In the learning phase, we train the DCNN and NN models using the ERA-Interim SM. When evaluation between DCNN and NN against in situ measurements in the testing phase, we find that the temporal correlations between DCNN SM and in situ measurements are higher than those between NN SM and in situ measurements by 6 . 2 % and 2 . 5 % on ascending and descending orbits, respectively. In addition, from the perspective of temporal and spatial dynamics, the simulated SM values by DCNN/NN and the ERA-Interim SM agree relatively well at a global scale. Results suggest that both NN and DCNN models are effective in estimating SM from satellite observations, and DCNN can achieve slightly better performance than NN.

Description: Remote Sensing, Vol. 10, Pages 1344: Evaluating the Potential of ALS Data to Increase the Efficiency of Aboveground Biomass Estimates in Tropical Peat–Swamp Forests Remote Sensing doi: 10.3390/rs10091344 Authors: Paul Magdon Eduardo González-Ferreiro César Pérez-Cruzado Edwine Setia Purnama Damayanti Sarodja Christoph Kleinn Estimates of aboveground biomass (AGB) in forests are critically required by many actors including forest managers, forest services and policy makers. Because the AGB of a forest cannot be observed directly, models need to be employed. Allometric models that predict the AGB of a single tree as a function of diameter at breast height (DBH) are commonly used in forest inventories that use a probability selection scheme to estimate total AGB. However, for forest areas with limited accessibility, implementing such a field-based survey can be challenging. In such cases, models that use remotely sensed information may support the biomass assessment if useful predictor variables are available and statistically sound estimators can be derived. Airborne laser scanning (ALS) has become a prominent auxiliary data source for forest biomass assessments and is even considered to be one of the most promising technologies for AGB assessments in forests. In this study, we combined ALS and forest inventory data from a logged-over tropical peat swamp forest in Central Kalimantan, Indonesia to estimate total AGB. Our objective was to compare the precision of AGB estimates from two approaches: (i) from a field-based inventory only and, (ii) from an ALS-assisted approach where ALS and field inventory data were combined. We were particularly interested in analyzing whether the precision of AGB estimates can be improved by integrating ALS data under the particular conditions. For the inventory, we used a standard approach based on a systematic square sample grid. For building a biomass-link model that relates the field based AGB estimates to ALS derived metrics, we used a parametric nonlinear model. From the field-based approach, the estimated mean AGB was 241.38 Mgha − 1 with a standard error of 11.17 Mgha − 1 (SE% = 4.63%). Using the ALS-assisted approach, we estimated a similar mean AGB of 245.08 Mgha − 1 with a slightly smaller standard error of 10.57 Mgha − 1 (SE% = 4.30%). Altogether, this is an improvement of precision of estimation, even though the biomass-link model we found showed a large Root Mean Square Error (RMSE) of 47.43 Mgha − 1 . We conclude that ALS data can support the estimation of AGB in logged-over tropical peat swamp forests even if the model quality is relatively low. A modest increase in precision of estimation (from 4.6% to 4.3%), as we found it in our study area, will be welcomed by all forest inventory planners as long as ALS data and analysis expertise are available at low or no cost. Otherwise, it gives rise to a challenging economic question, namely whether the cost of the acquisition of ALS data is reasonable in light of the actual increase in precision.