ALBERT

Description: The establishment of the Leveraging a Climate-neutral Society–strategic Research Network (LCS–RNet) (then named the International Research Network for Low Carbon Societies) was proposed at the Group of Eight (G8) Environment Ministers’ Meeting in 2008. Its 12th annual meeting in December 2021 focused on the discussion on how to transition into a just and sustainable society and how to reduce the risks associated with the transition. This requires comprehensive studies including on the concept of transition, pathways to net-zero societies and how to realise the pathways by collaborating with various stakeholders. This Special Feature provides new insights into sustainability science by linking the scientific knowledge with practical science for the transition through the exploration of studies presented at the annual meeting. Following the opening paper, "A challenge for sustainability science: can we halt climate change?", a wide range of topics were discussed, including practices for sustainable transformation in the Erasmus University, practices in industry, energy transition and international cooperation.

Description: This paper examines the current and prospective greenhouse gas (GHG) emissions of e-fuels produced via electrolysis and Fischer-Tropsch synthesis (FTS) for the years 2021, 2030, and 2050 for use in Germany. The GHG emissions are determined by a scenario approach as a combination of a literature-based top-down and bottom-up approach. Considered process steps are the provision of feedstocks, electrolysis (via solid oxide co-electrolysis; SOEC), synthesis (via Fischer-Tropsch synthesis; FTS), e-crude refining, eventual transport to, and use in Germany. The results indicate that the current GHG emissions for e-fuel production in the exemplary export countries Saudi Arabia and Chile are above those of conventional fuels. Scenarios for the production in Germany lead to current GHG emissions of 2.78-3.47 kgCO2-eq/L e-fuel in 2021 as the reference year and 0.064-0.082 kgCO2-eq/L e-fuel in 2050. With a share of 58-96%, according to the respective scenario, the electrolysis is the main determinant of the GHG emissions in the production process. The use of additional renewable energy during the production process in combination with direct air capture (DAC) are the main leverages to reduce GHG emissions.

Description: Direct air capture (DAC) combined with subsequent storage (DACCS) is discussed as one promising carbon dioxide removal option. The aim of this paper is to analyse and comparatively classify the resource consumption (land use, renewable energy and water) and costs of possible DAC implementation pathways for Germany. The paths are based on a selected, existing climate neutrality scenario that requires the removal of 20 Mt of carbon dioxide (CO2) per year by DACCS from 2045. The analysis focuses on the so-called "low-temperature" DAC process, which might be more advantageous for Germany than the "high-temperature" one. In four case studies, we examine potential sites in northern, central and southern Germany, thereby using the most suitable renewable energies for electricity and heat generation. We show that the deployment of DAC results in large-scale land use and high energy needs. The land use in the range of 167-353 km2 results mainly from the area required for renewable energy generation. The total electrical energy demand of 14.4 TWh per year, of which 46% is needed to operate heat pumps to supply the heat demand of the DAC process, corresponds to around 1.4% of Germany's envisaged electricity demand in 2045. 20 Mt of water are provided yearly, corresponding to 40% of the city of Cologne's water demand (1.1 million inhabitants). The capture of CO2 (DAC) incurs levelised costs of 125-138 EUR per tonne of CO2, whereby the provision of the required energy via photovoltaics in southern Germany represents the lowest value of the four case studies. This does not include the costs associated with balancing its volatility. Taking into account transporting the CO2 via pipeline to the port of Wilhelmshaven, followed by transporting and sequestering the CO2 in geological storage sites in the Norwegian North Sea (DACCS), the levelised costs increase to 161-176 EUR/tCO2. Due to the longer transport distances from southern and central Germany, a northern German site using wind turbines would be the most favourable.

Description: A clear understanding of socio-technical interdependencies and a structured vision are prerequisites for fostering and steering a transition to a fully renewables-based energy system. To facilitate such understanding, a phase model for the renewable energy (RE) transition in MENA countries has been developed and applied to the country case of Morocco. It is designed to support the strategy development and governance of the energy transition and to serve as a guide for decision makers. Such a phase model could be shared widely as part of Morocco's engagement in international platforms of multilateral collaboration, such as the Energy Transition Council (chaired by the United Kingdom (UK) and managed by the British Embassy - Rabat). The analysis shows that Morocco has fully embarked on the energy transition. According to the MENA phase model, Morocco can be classified as being in the second phase "System Integration of Renewables". Nevertheless, Morocco plans to considerably increase the use of natural gas in order to back up intermittent solar and wind energy sources. The diversification of energy sources and a diverse portfolio of storage options, including solar thermal power and hydrogen, can foster flexibility options. To this end, a roadmap for power-to-X (PtX) should be considered for a smooth transition of the Moroccan energy supply and demand system. The expansion of local REs can significantly contribute to reducing Morocco's high fossil fuel imports that are causing a high fiscal burden. With this regard, energy security can be strengthened. Next to large-scale deployment, decentralisation of the energy system must be built to encourage an energy transition on all societal levels. The results of the analysis along the transition phase model towards 100% RE are intended to stimulate and support the discussion on Morocco's future energy system by providing an overarching guiding vision for energy transition and the development of appropriate policies.

Description: Green hydrogen and synthetic fuels are increasingly recognized as a key strategic element for the progress of the global energy transition. The Middle East and North Africa (MENA) region, with its large wind and solar potential, is well positioned to generate renewable energy at low cost for the production of green hydrogen and synthetic fuels, and is therefore considered as a potential future producer and exporter. Yet, while solar and wind energy potentials are essential, other factors are expected to play an equally important role for the development of green hydrogen and synthetic fuels (export) sectors. This includes, in particular, adequate industrial capacities and infrastructures. These preconditions vary from country to country, and while they have been often mentioned in the discussion on green hydrogen exports, they have only been examined to a limited extent. This paper employs a case study approach to assess the existing infrastructural and industrial conditions in Jordan, Morocco, and Oman for the development of a green hydrogen and downstream synthetic fuel (export) sector.

Description: As society's reliance on software systems escalates over time, so too does the cost of failure of these systems. Meanwhile, the complexity of software systems, as well as of their designs, is also ever-increasing, influenced by the proliferation of new tools and technologies to address intended societal needs. The traditional response to this complexity in software engineering and software architecture has been to apply rationalistic approaches to software design through methods and tools for capturing design rationale and evaluating various design options against a set of criteria. However, research from other fields demonstrates that intuition may also hold benefits for making complex design decisions. All humans, including software designers, use intuition and rationality in varying combinations. The aim of this article is to provide a comprehensive overview of what is known and unknown from existing research regarding the use and performance consequences of using intuition and rationality in software design decision-making. To this end, a systematic literature review has been conducted, with an initial sample of 3909 unique publications and a final sample of 26 primary studies. We present an overview of existing research, based on the literature concerning intuition and rationality use in software design decision-making and propose a research agenda with 14 questions that should encourage researchers to fill identified research gaps. This research agenda emphasizes what should be investigated to be able to develop support for the application of the two cognitive processes in software design decision-making.

Description: Leftovers are particularly at risk of being discarded, and therefore a main component of household food waste. This study provides insights into sources of heterogeneity in leftover management behaviours, with a particular focus on the use of meal kits providing matched portion and ingredient sizes, and identifies consumer segments via a latent class analysis. We investigate whether belonging to a segment with positive attitudes toward leftovers, and engagement in conscious leftover management behaviours decreases the amounts of dinner leftovers and food waste. Besides, we demonstrate that several food waste antecedents, emotions, personal norms, intention and dinner procurement routines elicit leftover management segment membership. In addition to examining such individual differences, we also investigate the role of meal-level determinants, in particular, whether meal kits heterogeneously affect dinner leftovers depending on the consumer's leftover management segment. Data was collected from 868 households from six countries, using an online survey and diaries. Results of the latent class analysis point towards five consumer segments. We found differences in dinner leftovers amount across classes and detected heterogeneous effects of meal kits. That is, meal kits were able to diminish leftovers in two segments, but not in the other segments. These results provide novel insights into consumer heterogeneity regarding the occurrence, antecedents, and potential solutions of leftovers and resulting household food waste. Implications for both theory and policy are discussed.

Description: The production of green hydrogen in Germany is more competitive than expected compared to imports. This is the key finding of a meta-analysis conducted by the Wuppertal Institute on behalf of the North Rhine-Westphalia Association for Renewable Energies (Landesverband Erneuerbare Energien NRW). The hydrogen study focuses primarily on the year 2030 and beyond - and confirms the advantages of green hydrogen produced in Germany from domestic renewable energies, especially when the evaluation is viewed from a holistic system perspective.

Description: The food system faces a multitude of challenges, including high greenhouse gas emissions, threats to biodiversity, increased diet-related diseases due to unbalanced diets, and socially problematic complex supply chains. This requires not only a transformation of the agricultural economy but also a change in the diet and lifestyles of all consumers. Developing and using digital and technological innovations can help to solve these challenges. In this context, the study provides impulses on how digitalisation can contribute to transforming production and consumption and which prerequisites have to be given to achieve this. The study describes the approaches for digitalisation along the value chain. These include optimising the use of resources in agriculture - for example with the help of smart farming - and supporting consumers with digital tools and assistance systems - such as apps designed to support grocery shopping. In addition, new business models and a better connection between production and consumption processes are also possible. This includes, for example, new digital sales channels or tracking and communicating sustainability indicators such as CO2 emissions across all steps of the value chain in order to enable all stakeholders to take reliable action.

Description: The ecological challenges of this decade have been clearly identified. The pressure of problems is increasing drastically; progress in climate protection or the preservation of biodiversity is insufficient. Little time is left to act. In consequence, we can only achieve and permanently secure social and environmental prosperity through far-reaching changes in economy and society. As a socio-technical innovation, digitalisation can realise its full ecological potential above all where it helps to profoundly change today's lifestyles, consumption patterns, and economic practices with a clear commitment to sustainability. As the most urgent design task of the 21st century, it is important to put digitalisation's enormous creative power at the service of the great transformation. The "great transformation" refers to the comprehensive restructuring of technology, the economy, and society in order to deal with the social and ecological challenges of the 21st century. This is a task for state action in terms of both regulatory policy orientation and facilitating collective processes of change - new tasks call for new governance. A digital-ecological statecraft is the indispensable prerequisite for effective state action to shape the social-ecological digital transformation. Using the example of the platform economy, we explore challenges, starting points, and (policy) measures.

Description: In the energy sector, few topics, if any, are more hyped than hydrogen. Countries develop hydrogen strategies to provide a perspective for hydrogen production and use in order to meet climate-neutrality goals. However, in this topical field the role of water is less accentuated. Hence, in this study, we seek to map the interrelations between the water and wastewater sector on the one hand and the hydrogen sector on the other hand, before reflecting upon our findings in a country case study. We chose the Hashemite Kingdom of Jordan because (i) hydrogen is politically discussed not least due to its high potentials for solar PV, and (ii) Jordan is water stressed - definitely a bad precondition for water-splitting electrolyzers. This research is based on a project called the German-Jordanian Water-Hydrogen-Dialogue (GJWHD), which started with comprehensive desk research mostly to map the intersectoral relations and to scope the situation in Jordan. Then, we carried out two expert workshops in Wuppertal, Germany, and Amman, Jordan, in order to further discuss the nexus by inviting a diverse set of stakeholders. The mapping exercise shows various options for hydrogen production and opportunities for planning hydrogen projects in water-scarce contexts such as Jordan.

Description: 22 years are left until the German target for climate neutrality should be reached. For the industrial sector, this implies a fundamental change and an acceleration of emission reduction, as from 2000 to 2021 the sector has reduced its greenhouse gas (GHG) emissions by only 13% (ERK, 2022). For the large structures, plants and assets that are characteristic for the energy intensive industrial sectors, the timespan implies no room for delay. One sector facing particular challenges is the chemical industry. Here, fossil resources are used not only for energetic purposes but for feedstock as well, in the petrochemical industry in particular. The efforts made in the petrochemical sector thereby not only affects the sectors own emissions, but the chemicals value chain at large, including the management of end-of-life products. The dependency on energetic resources for material use also means that there is a particular connection from the chemical industry to the energy system at large, which also entails special consideration. The chemical industry also has a particular relevance to the Antwerp-Rotterdam-Rhine-Ruhr-Area (ARRRA) which hosts several large petrochemical clusters in Germany as well as the Netherlands and Belgium, with complexly interlinked production chains. In reaching the climate targets, these regions especially face significant changes and may have the opportunity to position themselves as frontrunners for industrial transformation. That is, if a successful strategy can be found. In the recent years, numerous scenario analyses and roadmaps have been released drawing out pathways for chemical industries to develop in line with national and international climate targets. This can entail mapping of technological options, important prerequisites, particular challenges as well as important opportunities and timeframes. This meta-analysis summarizes and compares the findings of some of the most recent previous works at the national, European and global level. As the goal is to investigate the various strategic options and development paths for Germany and the ARRRA, it has a particular focus on roadmaps for Germany, the Netherlands and Belgium. It takes a quantitative as well as qualitative approach, looking both at resource and production volumes, different emission reduction strategies relative importance, as well as policy recommendations and other important framework conditions. A particular focus is put on the use of non-fossil feedstocks to reduce emissions.

Description: The EU Horizon 2020 project HiEff-BioPower (grant agreement No 727330, duration: 10/2016 - 09/2021) aimed at the development of a new, innovative, fuel flexible and highly efficient biomass CHP technology for a capacity range of 1 to 10 MW total energy output, suitable e.g. for on-site generation at larger residential apartment buildings or local heat grids. The new technology shall define a new milestone in terms of CHP efficiency and contribute to a sustainable energy supply based on renewable energies using otherwise unused residual biomass. It consists of a fuel-flexible updraft gasification technology with ultra-low particulate matter emissions, an integrated gas cleaning system and a solid oxide fuel cell (SOFC). The technology shall be applicable for a wide fuel spectrum for residual biomass (wood pellets, wood chips or selected agricultural fuels like agro-pellets) and achieve high gross electric (40%) and overall (90%) efficiencies as well as almost zero gaseous and particulate matter (PM) emissions (close or below the level of detection) as non-energy benefits. At the end of the project, final technology data has become available, as well as techno-economic analyses and market studies. Based on this data, this paper presents final results from the environmental impact assessment of the new HiEff-BioPower technology.

Description: To combat climate change, it is anticipated that in the coming years countries around the world will adopt more stringent policies to reduce greenhouse gas emissions and increase the use of clean energy sources. These policies will also affect the industry sector, which means that industrial production is likely to progressively shift from CO2-emitting fossil fuel sources to renewable energy sources. As a result, a region's renewable energy resources could become an increasingly important factor in determining where energy-intensive industries locate their production. We refer to this pull factor as the "renewables pull" effect. Renewables pull could lead to the relocation of some industrial production as a consequence of regional differences in the marginal cost of renewable energy sources. In this paper, we introduce the concept of renewables pull and explain why its importance is likely to increase in the future. Using the examples of direct reduced iron (DRI) and ammonia production, we find that the future costs of climate-neutral production of certain products is likely to vary considerably between regions with different renewable energy resources. However, we also identify the fact that many other factors in addition to energy costs determine the decisions that companies make in term of location, leaving room for further research to better understand the future relevance of renewables pull.

Description: Established in 2016, the German-Japanese Energy Transition Council (GJETC) strives to promote bilateral cooperation between Germany and Japan on energy transition. Among other studies and topical papers, an output paper in 2020 (Rauschen et al., 2020) already compared the energy efficiency in buildings in both countries with a particular focus on heating and cooling. One important finding of this output paper was that further efforts in the building sector are needed to improve the energy efficiency of buildings in Germany and Japan. Following the more ambitious climate protection targets in both countries, this study seeks to analyze the German and Japanese policies put in place to accelerate the decarbonization of the building sector. The decarbonization of the vast number of buildings that both Japan and Germany are facing will be a major contribution to achieving the GHG reduction targets of both countries and should continue to be discussed among experts and developed into a discussion among policy makers. This report examines and compares the characteristics of the building stock in both countries, as well as existing policies and new strategies and policies that are planned or discussed to achieve energy conservation and decarbonization of buildings. The current shape of buildings, especially houses, is greatly influenced by the land area of the country corresponding to the available space for buildings, the natural environment surrounding the country, the natural resources available, and the lifestyle and cultural ideas that have been passed down and taken root over time. Therefore, it might be difficult to compare them and the corresponding strategies and policies with the same yardstick, so we also discuss common or deviant situations. Through this joint research, we aim to find each other's advantages and challenges and to develop useful and concrete policy recommendations that will contribute to decarbonization policies in both countries.

Description: While digital technologies hold significant transformational potential, anecdotal evidence suggests that the digital transformation might not be directed towards sustainable development sufficiently. Drawing on a modified and extended version of the framework proposed by Wanzenböck et al. (2020), we explore the cases of the circular economy and the transition towards a sustainable energy system in the twin transition. Making use of insights from 20 expert interviews and two in-depth interviews, we aim to gain a first careful indication of the convergence/divergence in societal views on key problems and solutions across different dimensions (technological, economic, socio-cultural, regulatory) and derive insights for integrated policy-making. Thereby the study contributes to bridging the existing gap between mission-oriented policies and the twin transition. Overall, our first insights indicate that while showing high similarities in the structure of problems and solutions across cases, the variety in wickedness (contestation, complexity, uncertainty) calls for differentiated policy-making: Significant parts of the relatively young twin transition might be in a state of disorientation where societal views on problems and solutions diverge. This would require policy-makers to follow a "discovery-mode" (basic research, experiments and monitoring) with only selected diffusion-focused strategies. Further, we show that missions in the twin transition require highly flexible policy-making as different approaches need to be applied simultaneously. Finally, there are several options for exploiting synergies in policy-making due to some overlapping characteristics as well as learning opportunities between cases. We believe that particularly our holistic perspective on the twin transition can yield substantial guidance for researchers and policy-makers in the field.

Description: This case study examined the structural change in the Ruhr area caused by the low international competitiveness of German hard coal mining over the period from the late 1950s to 2015. It analysed the structural change process and the structural policies implemented as a reaction to this process with the objective to make this knowledge available for future structural change processes in other (coal) regions by deploying various qualitative and quantitative methods of empirical social and economic research. A discourse analysis helped to recognise who supported which structural policy approaches and why - and thus gives indications of the possible relevance of experiences for other regions.

Description: Dominant agricultural and food systems lead to continuous resource depletion and unacceptable environmental and social impacts. While current calls for changing agrifood systems are increasingly framed in the context of sustainability transitions, they rarely make an explicit link to transition studies to address these systemic challenges, nor do transition scholars sufficiently address agri-food systems, despite their global pertinence. From this viewpoint, we illustrate several gaps in the agri-food systems debate that sustainability transition studies could engage in. We propose four avenues for research in the next decade of transition research on agri-food systems: 1) Crossscale dynamics between coupled systems; 2) Social justice, equity and inclusion; 3) Sustainability transitions in low- and middle-income countries; 4) Cross-sectoral governance and system integration. We call for a decade of new transition research that moves beyond single-scale and sector perspectives toward more inclusive and integrated analyses of food system dynamics.

Description: Technological breakthroughs and policy measures targeting energy efficiency and clean energy alone will not suffice to deliver Paris Agreement-compliant greenhouse gas emissions trajectories in the next decades. Strong cases have recently been made for acknowledging the decarbonisation potential lying in transforming linear economic models into closed-loop industrial ecosystems and in shifting lifestyle patterns towards this direction. This perspective highlights the research capacity needed to inform on the role and potential of the circular economy for climate change mitigation and to enhance the scientific capabilities to quantitatively explore their synergies and trade-offs. This begins with establishing conceptual and methodological bridges amongst the relevant and currently fragmented research communities, thereby allowing an interdisciplinary integration and assessment of circularity, decarbonisation, and sustainable development. Following similar calls for science in support of climate action, a transdisciplinary scientific agenda is needed to co-create the goals and scientific processes underpinning the transition pathways towards a circular, net-zero economy with representatives from policy, industry, and civil society. Here, it is argued that such integration of disciplines, methods, and communities can then lead to new and/or structurally enhanced quantitative systems models that better represent critical industrial value chains, consumption patterns, and mitigation technologies. This will be a crucial advancement towards assessing the material implications of, and the contribution of enhanced circularity performance to, mitigation pathways that are compatible with the temperature goals of the Paris Agreement and the transition to a circular economy.

Description: This study presents in detail: the use of plastic products and the opportunities for recyclate use in the construction sector, quantities of plastic used, take-back systems, recycling techniques, current recyclate use and plastic construction product packaging.Potentials for increasing high-quality recyclate use were identified. Existing hurdles and options for action for industry and politics are presented. Current recyclate use as well as its potential use are strongly dependent on the application area of plastics. The biggest hurdles for the use of recycled materials are product life time, dismantling and technical requirements.

Description: CICERONE aims to bring national, regional and local governments together to jointly tackle the circular economy transition needed to reach net-zero carbon emissions and meet the targets set in the Paris Agreement and EU Green Deal. This document represents one of the key outcomes of the project: a Strategic Research & Innovation Agenda (SRIA) for Europe, to support owners and funders of circular economy programmes in aligning priorities and approaching the circular economy transition in a systemic way.

Description: The idea for the Green Recovery Tracker was born in spring 2020 when governments started making announcements on economic Corona recovery measures. From a climate and resilience perspective it is key that those recovery packages, investments and subsidies are in line with long-term climate and sustainability targets. Thus, recovery packages should not only boost the economy in the short-term, but also strike the path to a just transition towards climate neutrality. Against this background, Wuppertal Institute and E3G have launched the Green Recovery Tracker project in late summer 2020 to shed light on the following questions: What can be considered an effective green recovery? What are good examples, which can be used as an inspiration for recovery programs aiming to support sustainable development? Where do the individual Member States stand with respect to aligning their recovery activities with the climate policy agenda? In this report, you will find our Methodology as well our Policy Briefing highlighting our key takeaways of our country and sectoral analyses. It further includes a section on "What can we learn from our experience with the Green Recovery Tracker?". The briefing concludes with a "Guidance for future funding programs and achieving climate targets overall".

Description: By applying a phase model for the renewables-based energy transition in the MENA countries to Israel, the study provides a guiding vision to support the strategy development and steering of the energy transition process. The transition towards a renewable-based energy system can reduce import dependencies and increase the energy security in Israel. Key issues that need to be tackled in order to advance the energy transition in Israel are the expansion of flexibility options, discussion on the long-term role of natural gas, increasing participation and awareness, and exploring the future role of power-to-X in the energy system.

Description: A clear understanding of socio-technical interdependencies and a structured vision are prerequisites for fostering and steering a transition to a fully renewables-based energy system. To facilitate such understanding, a phase model for the renewable energy transition in MENA countries has been developed and applied to the country case of Iraq. It is designed to support the strategy development and governance of the energy transition and to serve as a guide for decision makers. The transition towards renewable energies is still at a very early stage in Iraq. Despite the drop in renewable technology costs over the last decade and the increasing deployment of renewables in the MENA region, the pathway towards renewable energies seems to be challenging for Iraq. This is attributable to the country's political instability and the dominant economic role played by the fossil fuel sector. The most pressing concern for Iraq's electricity sector is the need to secure a constant electricity supply. At operational level, Iraq's electricity infrastructure requires significant investment to rebuilt, retro-fit and expand its overall capacity and to improve efficiencies. Yet, the need to rebuild the energy system after the war and the subsequent violent conflicts could offer an opportunity for a transition towards renewables that would benefit Iraq in the short term and also provide a long-term economic development perspective. To take advantage of this opportunity, Iraq needs to improve the framework conditions for renewable energies and raise awareness about the benefits it offers. Renewable energy regulations need to be introduced, market development supported, a realistic timeframe for the transition process established and an appropriate and reliable legal framework developed. The results of the analysis along the transition phase model towards 100% renewables are intended to stimulate and support the discussion about Iraq's future energy system by providing an overarching guiding vision for the energy transition and the development of appropriate policy strategies.

Description: A clear understanding of socio-technical interdependencies and a structured vision are prerequisites for fostering and steering a transition to a fully renewables-based energy system. To facilitate such understanding, a phase model for the renewable energy transition in MENA countries has been developed and applied to the country case of Egypt. It is designed to support the strategy development and governance of the energy transition and to serve as a guide for decision makers. Egypt, with its abundant solar and wind energy potential, has excellent preconditions to embark on the pathway towards a 100% renewable energy system. The country has successfully taken its first steps in this direction by attracting international finance and implementing several large-scale solar and wind projects. Yet, while Egypt has made significant progress, increased efforts are still required if the country aims to proceed towards a fully renewables-based system. The stronger system integration of renewable energies requires, for example, an alignment of regulations for the electricity, mobility and heat sectors. In this context, Egypt would be well advised to develop and implement an overall strategy for the energy transition that includes not only electricity generation but all sectors. By placing a stronger focus on renewable energy, also to decarbonise the industrial sector, Egypt, as Africa's second most industrialised country, could seize the opportunity for economic development within a decarbonising global economy. The results of the analysis along the transition phase model towards 100% renewable energy are intended to stimulate and support the discussion on Egypt's future energy system by providing an overarching guiding vision for the energy transition and the development of appropriate policies.

Description: With the move to a hydrogen-based primary steel production envisioned for the near future in Europe, existing regional industrial clusters loose major assets. Such a restructuring of industries may result in a new geographical distribution of the steel industry and also to another quality of vertical integration at sites. Both implications could turn out as drivers or barriers to invest in new technologies and are thus important in respect to vertical integration of sites and to regional policy. This paper describes an approach to model production stock invest for the steel industries in North-Western Europe. Current spatial structures are reproduced with capacity, technical and energy efficiency data on the level of single facilities like blast furnaces. With the model developed both investments in specific technologies and at specific production sites can be modelled. The model is used to simulate different possible future scenarios. The case with a clear move to hydrogen-based production is compared to a reference scenario without technological shift. The scenarios show that existing trends like movement of production to the coast may be accelerated by the new technology but that sites in the hinterland can also adapt to a hydrogen economy. Possible effects of business cycles or a circular economy on regional value chains are explored with a Monte-Carlo analysis.

Description: Direct Air Capture (DAC) is increasingly being discussed as a possibility to limit climate change. In this study, a possible rollout of the DAC technology at German coastal areas is analysed based on an existing climate neutrality scenario. For the year 2045 the resulting costs as well as land, water and energy consumption are examined. It is concluded that a realization of the DAC technology in Germany might be possible from a technical point of view. However, there is a high demand for land and energy. Since a rollout is needed to start in 20 years at the latest, the required discussion and evaluation should be initiated as quickly as possible.

Description: Model-based scenario analyses of future energy systems often come to deviating results and conclusions when different models are used. This may be caused by heterogeneous input data and by inherent differences in model formulations. The representation of technologies for the conversion, storage, use, and transport of energy is usually stylized in comprehensive system models in order to limit the size of the mathematical problem, and may substantially differ between models. This paper presents a systematic comparison of nine power sector models with sector coupling. We analyze the impact of differences in the representation of technologies, optimization approaches, and further model features on model outcomes. The comparison uses fully harmonized input data and highly simplified system configurations to isolate and quantify model-specific effects. We identify structural differences in terms of the optimization approach between the models. Furthermore, we find substantial differences in technology modeling primarily for battery electric vehicles, reservoir hydro power, power transmission, and demand response. These depend largely on the specific focus of the models. In model analyses where these technologies are a relevant factor, it is therefore important to be aware of potential effects of the chosen modeling approach. For the detailed analysis of the effect of individual differences in technology modeling and model features, the chosen approach of highly simplified test cases is suitable, as it allows to isolate the effects of model-specific differences on results. However, it strongly limits the model's degrees of freedom, which reduces its suitability for the evaluation of fundamentally different modeling approaches.

Description: The construction sector is the second largest area for the application for plastics. Due to the long life times of construction products, the implementation of the circular economy faces its own challenges. To investigate this challenge, the study covers a market study for Germany, voluntary take-back and recycling schemes of construction products, as well as the use of plastic recyclates in construction products. In addition, plastic packaging of construction products is covered. Opportunities and barriers to the use of recycled plastics in construction products are derived from the intersection of available technologies, recyclate supply, and technical requirements for construction products. The report concludes with recommendations to various stakeholders on how to promote the use of recyclates in construction products and their packaging. Important points here are the introduction of a recyclate quota for films as construction product packaging and the description of recycling possibilities and recyclate content in the technical documentation of construction products.

Description: A clear understanding of socio-technical interdependencies and a structured vision are prerequisites for fostering and steering a transition to a fully renewables-based energy system. To facilitate such understanding, a phase model for the renewable energy (RE) transition in the Middle East and North Africa (MENA) countries has been developed and applied to ten countries: Algeria, Egypt, Iraq, Israel, Jordan, Lebanon, Morocco, Palestine, Tunisia, and Yemen. This report synthesises the results of these ten studies. The analysis shows that the state of the energy sector in the MENA region varies from country to country, but some underlying trends are present in all countries. In the majority of countries, energy prices are subsidised, and energy markets are mostly not liberalised. The energy demand in all analysed countries is growing and most grid systems are poorly interconnected across borders. Still, the expansion of RE in the MENA region can benefit from significant global progress and cost reductions in RE technologies. Reducing greenhouse gas (GHG) emissions is not the only key driver for energy transition. In fact, the main motives for transition are that RE can help to meet growing demand, reduce dependence on imports, increase energy security, and provide opportunities for economic development. All countries studied have RE targets. While some countries are on track to meet these targets, others need to increase their efforts to expand renewable electricity generation in order to meet their goals. Strong progress has been made in countries with limited fossil energy resources, while in some countries that produce and export large amounts of fossil energy resources, the energy transition is progressing rather slowly.

Description: A clear understanding of socio-technical interdependencies and a structured vision are prerequisites for fostering and steering a transition to a fully renewables-based energy system. To facilitate such understanding, a phase model for the renewable energy (RE) transition in MENA countries has been developed and applied to the country case of Yemen. It is designed to support the strategy development and governance of the energy transition and to serve as a guide for decision makers. The transition towards REs is still at a quite early stage in Yemen. The military conflict has prevented the implementation of most of the planned large-scale renewable projects. The political instability, the high dependence on fossil fuels, and poor administrative performance are the most pressing concerns for Yemen's electricity sector. At an operational level, Yemen requires a total retrofit of the electricity infrastructure and needs to expand its overall capacity while improving its efficiencies. Despite these challenges, rebuilding the energy system after the political turmoil and the subsequent violent conflicts could offer Yemen the capability to transition towards renewables. This will provide short-term and long-term opportunities and avoid stranded investments in fossil-fuel capacities. The priority is to improve the framework conditions for RE in Yemen, starting with the development of a long-term strategy up to 2030 and beyond. Also, an appropriate and transparent legislation must be created. Furthermore, based on the legislation, clear regulations for REs must be introduced, and a realistic timeframe for expansion must be established in order to promote acceptance and market development on a large scale. The results of the analysis along the transition phase model towards 100% RE are intended to stimulate and support the discussion on Yemen's future energy system by providing an over-arching guiding vision for the energy transition and the development of appropriate policies.

Description: A clear understanding of socio-technical interdependencies and a structured vision are prerequisites for fostering and steering a transition to a fully renewables-based energy system. To facilitate such understanding, a phase model for the renewable energy (RE) transition in the Middle East and North Africa (MENA) countries has been developed and applied to the country case of Lebanon. It is designed to support the strategy development and governance of the energy transition and to serve as a guide for decision makers. Lebanon's energy transition towards REs stands at a very early stage of the first transformation phase. Although abundant solar and wind energy potential does exist, the pathway towards a 100% renewables energy seems very challenging for Lebanon, as a consequence of highly unstable political conditions. The most pressing concern for Lebanon's electricity sector is combating the country's fiscal imbalance, while providing secure and reliable electricity supply. At the operational level, Lebanon's grid network requires significant investments to rebuild, retrofit, and expand the overall capacity and energy efficiency improvements. The need to strengthen the energy system after the political turmoil of the civil war is likely to offer several long-term opportunities, such as developing the economy, reducing environmental pollution, and increasing the energy security. In order to move forward into the first phase, Lebanon needs to improve the framework conditions for REs and implement its visions. It needs to support the market development in a realistic timeframe, where structural reforms represent the highest priority. The results of the analysis along the transition phase model towards 100% renewables energy are intended to stimulate and support the discussion on Lebanon's future energy system by providing an overarching guiding vision for the energy transition and the development of appropriate policies.

Description: On the basis of a literature research, this subtask develops a conceptional framework for a common understanding of CE within the project team and for the following work packages and tasks. After a brief introduction into the objectives and the context of a circular economy, a more elaborated look into the necessity of an explicit understanding of CE, the objectives, the spatial perspective of CE and the specific challenges within the CICERONE context will be done, in order to develop a basis for a common understanding within the project context. Circular economy can and has to be understood as an (eco-)innovation agenda. Therefore, the paper investigates the role policy has to play to support innovation for a CE transition, for creating the framework conditions and why CE has also to be build from the ground up. Finally, the paper looks from two perspectives at emerging trends and business models in a CE to sketch next steps towards the transition in a selection of central sectors. Conclusions are drawn on the basis of the insights gained by the preceding chapters.

Description: The key objective of this deliverable is to gain insights on and assess how CE is being implemented and R&I is being funded at regional level, e.g., via the RIS3 strategy and Structural Funds. As such it sets the scope for the project and provides the background against which programmes and measures can be understood, assessed, developed and recommended in succinct tasks and work packages. The objective of this report is to provide a concise overview of the current R&I priorities, as expressed in running and newly introduced funding and legislative measures with respect to Circular Economy in European countries and regions.

Description: The EU aims to become the first climate neutral continent. To achieve this goal, the industry sector needs to reduce its GHG emissions to net zero or at least close to net zero. This is a particularly challenging task due to the high energy demand especially of primary materials production and the little potential to reduce this energy intensity when switching to other production processes based on electricity or hydrogen. In order to identify robust strategies for achieving a net-zero-compatible industry sector, the paper at hand analyses the transformation of the industry sector as described by a number of recent climate neutrality scenarios for Germany. Apart from overall industry, a focus is set on the sectors of steel, chemicals and cement. The analysed scenarios show very deep GHG emission reductions in industry and they appear to be techno-economically feasible by the mid of the century, without relying on offsets or on shifts from domestic production to imports. The scenarios agree on a suite of core strategies to achieve this, such as direct and indirect electrification, energy efficiency and recycling as well as new technological routes in steel making and cement. The scenarios differ, however, regarding the future mix of electricity, hydrogen and biomass and regarding the future relevance of domestic production of basic chemicals.

Description: More and more cities are setting themselves ambitious climate protection targets, including CO2 neutrality. Schools are important institutions of cities and therefore they have to play a central role in achieving this goal. With the investment backlog building up and pressure from the Friday for Future movement increasing, the Wuppertal Institute and Büro Ö-quadrat have initiated the project Schools4Future, aiming to support secondary schools to become climate-neutral. In cooperation with secondary school students and teachers, the project team evaluated the existing situation of the participating schools and developed GHG-balances and feasible climate protection concepts. For this purpose, an Excel-based carbon footprint (CF) assessment tool for schools has been developed which is freely available. The tool covers all important emission areas, including heating energy, electricity use, travel to and from schools, school trips, the school canteen and paper consumption. The students were found capable to conduct the CF assessment with the guidance of the teacher, information materials and support of the researchers. So far, six pilot schools have completed their CF assessment with emissions ranging between 335 and 944 kg CO2 per person. In this paper we present the tool and compare the CF assessment of some schools. We further elaborate on how the tool and project has increased the climate awareness and self-efficacy of students and even stimulated measures by the school board.

Description: This paper analyses the potential of digital information technology to enable the reliable provision of product information along the plastics supply chain. The authors investigate the possible contribution of a product passport equipped with decentralised identifiers and verifiable credentials to overcome information deficits and information asymmetry in the circular plastics economy. Through this, high-quality plastics recycling could be enabled on a larger scale than currently possible.

Description: Variations in quantity, quality and time availability of input materials pose a major risk to circular supply chains (CSC) and require new models for creating and evaluating adaptive and resilient CSC in the circular economy (CE). This can be achieved through consistent modelling of the overarching relationship between resource input- and output streams, without neglecting the associated risks. The model proposed below consists of five components based on five resilience requirements for supply-chains (SCs). It provides a data-based recommended course of action for managers with a low entry-barrier. It consists of a CSC visualization, safety stock calculation, risk monitoring for each SC node, reporting logic, and a measurement catalogue. The inspiration for this model came from an innovative case study ("Zirkelmesser") in the metal processing industry, where secondary products and materials are used to produce new products. Here, the problem of maintaining the resource supply arose and led to resilience issues. The mentioned case study serves as an application example for the model application and contributes to making emerging circular supply chains predictable and more controllable, thus increasing their resilience.

Description: Food production is responsible for approximately 17% of Germany's greenhouse gas (GHG) emissions. After retail, out-of-home catering is the second largest food sales channel in Germany. A variety of means on both the supply and demand side are necessary to stimulate, facilitate and encourage a more sustainable development and minimise GHG emissions in this sector. Nudges are one of these. This paper's focus lies on the demand side. Set in real-world laboratories, we use a standardised empirical approach to compare different nudging interventions belonging to the area of physical environment and consumers’ choice making process. We compare the effects of the same intervention across different settings and the effect of different, sequential nudging interventions in the same setting. Data was collected in eight workplace and school cafeterias in Germany over two project iterations (2016/2017; 2019/2020). A similar intervention design was applied. Comparability was assured by a harmonised menu. The first project iteration revealed that only one nudge (top menu position, +22.5%) led to significant increases in sustainable food choices, while results from the second iteration showed that all nudge interventions (best counter position, +11.6%; top menu position, +6,9%; label plus information, +15.9%) positively influenced consumer choice. Possible explanations such as the stricter compliance to the experimental design in the cafeterias but also societal developments such as the appearance of the Fridays for Future movement are discussed. As results vary between specific locations and settings, our findings suggest that nudges need to be adjusted to situational conditions for achieving highest efficacy.

Description: Household food waste is determined by a complex set of routinized behaviors, and disruption of these routines may allow for a decrease in this vast amount of food waste. The current study examines such a disruption of household routines: the meal box. The potential of meal boxes to diminish different types of household food waste is investigated for the first time, across different countries. After providing a framework comparing the effects of different types of meals on food waste, we subsequently examine the effects of subscription-based food supply (i.e., meal boxes) on total meal waste as well as on the different types of food waste: preparation, cooking, and plate waste. Our dataset contains 8747 meal observations from 955 households in six countries. Results from a Bayesian multilevel hurdle-lognormal model with random intercept show that, overall, meal boxes reduce total meal waste in comparison to traditionally cooked dinners (38% reduction). Meal boxes especially lower the occurrence and amount of pan-and-pot food that is wasted (i.e., cooking waste), and also lower the amount of meal preparation waste, yet lead to a higher occurrence of both preparation and plate waste compared to traditional meals. This shows how differences between meals affect household food waste, something that has received little prior research attention. Furthermore, whereas most prior research has focused on overall household food waste, our study illustrates that distinguishing between different types of household food waste can provide important new insights.

Description: The steel industry is responsible for a quarter of all industrial greenhouse gas emissions. So far, the environmental savings are mainly due to steel recycling. Besides recycling, the circular economy offers strategies to increase material efficiency and thus decrease the primary raw material demand. However, the potentials remain unexploited because circular economy concepts with a higher degree of circularity are not considered. The presented case study of an industrial machining knife illustrates how the production process can be improved by implementing various circular strategies. The environmental performance is analyzed by calculating and comparing the carbon footprint, the cumulative energy demand and the material footprint, and the material efficiency indicator. The results show that the implementation of the three overarching strategies of the circular economy - narrowing, closing, and slowing - contributes to a significant increase in material efficiency. The implementation also has a positive effect on the overall environmental performance. The circular production processes require less energy and resources and cause fewer emissions. Auxiliary processes such as additional transport routes are relevant, as they can reduce or even overcompensate for savings. These processes must be adequately considered and designed.

Description: The impending climate catastrophe gives rise to an increased environmental awareness among many designers, who direct their work towards the paradigm of sustainability. While designing with an "ecological lens" is necessarily oriented towards the future, we highlight the past as an inspiring realm to explore. Rather than recycling materials, we encourage the recycling of ideas as a combination of historiographic and speculative design methods. We will present a framework that extends the idea of design as a "projecting" activity into the idea of design as a constant negotiation process about the relevance and appropriateness of current and past technologies. Design revolves not just about what will be, but to a large extent about what should remain and what should recur, or as Jan Michl put it: "seeing design as redesign" (Michl 2002). We will illustrate the thought of designing futures with pasts by means of a research project that aims at developing a refrigerator for circular economy. The refrigerator - as the currently dominant technology to preserve food - will serve as a starting point to show how artefacts and architecture as well as human skills and knowledge in the preparation and preservation of food are historically interlinked. The history of food preservation unfolds not only along the evolution of the refrigerator, but encompasses household techniques like smoking, curing and fermenting, as well as long-forgotten architectural "answers" such as deep-freeze community buildings. We will revisit three historical examples of food preservation and present the method ‘throwing’ past ideas into the future. Three main arguments are presented in this richly illustrated paper: First, that historiography is a form of designing, second, that designing is constituted and influenced by path dependencies (cf. David 1985) that are deeply rooted in the past and third, that the past is a valuable source of inspiration when designing for sustainable development. Looking at history becomes a way of "mental window shopping" (Simon 1985, 188) for approaches that are to be reactivated and transformed.

Description: The challenges and also potentials of the energy transition are tremendous in Germany, as well as in Japan. Sometimes, structures of the old energy world need "creative destruction" to clear the way for innovations for a decarbonized, low-risk energy system. In these times of disruptive changes, a constructive and sometimes controversial dialog within leading industrial nation as Japan and Germany over the energy transition is even more important. The German-Japanese Energy Transition Council (GJETC) released a summarizing report for the first project phase 2016-2018. It includes jointly formulated recommendations for politics as well as a controversial dialogue part. The Council jointly states and recommends that: Ambitious long-term targets and strategies for a low-carbon energy system must be defined and ambitiously implemented; Germany and Japan as high technology countries need to take the leadership. Both countries will have to restructure their energy systems substantially until 2050 while maintaining their competitiveness and securing energy supply. Highest priority is given to the forced implementation of efficiency technologies and renewable energies, despite different views on nuclear energy. In both countries all relevant stakeholders - but above all the decision-makers on all levels of energy policy - need to increase their efforts for a successful implementation of the energy transition. Design of the electricity market needs more incentives for flexibility options and for the extensive expansion of variable power generation, alongside with strategies for cost reduction for electricity from photovoltaic and wind energy. The implementation gap of the energy efficiency needs to be closed by an innovative energy policy package to promote the principle of "Energy Efficiency First". Synergies and co-benefits of an enhanced energy and resource efficiency policy need to be realized. Co-existence of central infrastructure and the growing diversity of the activities for decentralization (citizens funding, energy cooperatives, establishment of public utility companies) should be supported. Scientific cooperation can be intensified by a joint working group for scenarios and by the establishment of an academic exchange program.

Description: The German-Japanese Energy Transition Council (GJETC) was established in 2016 by experts from research institutions, energy policy think tanks, and practitioners in Germany and Japan. The objectives and main activities of the Council and the supporting secretariats are to identify and analyze current and future issues regarding policy frameworks, markets, infrastructure, and technological developments in the energy transition, and to hold Council meetings to exchange ideas and propose better policies and strategies. In its second project phase (2018-2020), the GJETC had six members from academia on the Japanese side, and eight members on the German side, with one Co-Chair from each country. From October 2018 to March 2020, the GJETC worked on and debated six topics: 1) Digitalization and the energy transition. 2) Hydrogen society. 3) Review of German and Japanese long-term energy scenarios and their evaluation mechanism. 4) Buildings, energy efficiency, heating/cooling. 5) Integration costs of renewable energies. 6) Transport and sector coupling. The outputs and the recommendations of the second phase of the GJETC are summarized in this report.

Description: The transformation of society into sustainable structures is one of the most important tasks for the future. That cities have a decisive role to play in this transformation process has been known at least since Rio 1992. They have enormous pressure to act for change: They are at the same time problem and solution for sustainable development. Currently there is another significant development for cities - the need and external pressure to be "smart", often understood merely as applying the latest digital technologies to become more efficient. The Smart City and the Sustainable City can work hand in hand or hinder each other, depending on their interpretation. In this study we focus on five Smart Cities in Western Germany to get a closer look at how they shape their processes and whether the underlying motivation is to become a technologically Smart City, focus on sustainable development, or both. With the help of the innovation biography research method, we show how cities shape the dynamic process towards forming a Smart City, the role sustainable urban development plays in the process, who the actors involved are, and the important role improved knowledge management then plays for the diffusion of the Smart Sustainable City within the region. It becomes clear how important communication and narratives are both in the process within each City towards forming a Smart Sustainable City and for the first step of diffusion, the adaptation of other cities within the region. This study is intended to serve both as a basis for cross-regional consideration and dialogue for the transfer of successful processes.

Description: Food and nutrition systems are linked to all Sustainable Development Goals (SDGs), which makes their transition toward social-ecological behavior patterns crucial for an overarching sustainability transformation. The perspective of (urban) logistics is of special interest. It couples the production and consumption physically and virtually. In this context, we shed light on the design of the turnover point of food in urban areas from the supply chain toward consumers and contribute to an overarching systemic perspective toward establishing a sustainable multilevel food system. We describe current patterns in urban food systems and propose several principles for sustainable design of (urban) food systems based on concepts such as (regional) collaboration and food literacy. Using these principles, we provide four design scenarios that concretely imagine future urban food consumption and production patterns titled "slow stock supply service," "deliver into the daily walk," "central district food depot," "super food action place." With this work we provide a starting for reflecting whether certain combinations of principles actually lead to patterns of daily life that are feasible, acceptable, or desirable. Moreover, we provide an initial qualitative assessment to stimulate further research that explores scenario pathways and incorporates additional indicators regarding the impact on social-ecological. We open up various research questions with regard to the overarching question of how urban food logistics should be designed to be consistent with the SDGs.

Description: Transponder-based Aircraft Detection Lighting Systems (ADLS) are increasingly used in wind turbines to limit beacon operation times, reduce light emissions, and increase wind energy acceptance. The systems use digital technologies such as receivers of digital transponder signals, LTE/5G, and other information and communication technology. The use of ADLS will be mandatory in Germany both for new and existing wind turbines with a height of 〉100 m from 2023 (onshore) and 2024 (offshore), so a nationwide rollout is expected to start during 2022. To fully realize the benefits while avoiding risks and bottlenecks, a thorough and holistic understanding of the efforts required and the impacts caused along the life cycle of an ADLS is essential. Therefore, this study presents the first multi-aspect holistic evaluation of an ADLS. A framework for evaluating digital applications in the energy sector, previously developed by the authors, is refined and applied. The framework is based on multi-criteria analysis (MCA), life cycle assessment (LCA), and expert interviews. On an aggregated level, the MCA results show an overall positive impact from all stakeholders’ perspectives. Most positive impacts are found in the society and politics category, while most negative impacts are of technical nature. The LCA of the ADLS reveals a slightly negative impact, but this impact is negligible when compared to the total life cycle impact of the wind turbines of which the ADLS is a part. Besides the aggregated evaluation, detailed information on potential implementation risks, bottlenecks, and levers for life cycle improvement are presented. In particular, the worldwide scarcity of the required semiconductors, in combination with the general lack of technicians in Germany, lead to the authors’ recommendation for a limited prolongation of the planned rollout period. This period should be used by decision-makers to ensure the availability of technical components and installation capacities. A pooling of ADLS installations in larger regions could improve plannability for manufacturers and installers. Furthermore, an ADLS implementation in other countries could be supported by an early holistic evaluation using the presented framework.

Description: The study investigates if causal claims based on a theory-of-change approach for impact reporting are credible. The authors use their most recent impact report for a Social Bond to show how theory-based logic models can be used to map the sustainability claims of issuers to quantifiable indicators. A single project family (homeownership loans) is then used as a case study to test the underlying hypotheses of the sustainability claims. By applying Bayes Theorem, evidence for and against the claims is weighted to calculate the degree to which the belief in the claims is warranted. The authors found that only one out of three claims describe a probable cause–effect chain for social benefits from the loans. The other two claims either require more primary data to be corroborated or should be re-defined to link the intervention more closely and robustly with the overarching societal goals. However, all previous reported indicators are below the thresholds of the most conservative estimates for fractions of beneficiaries in the paper at hand. We conclude that the combination of a Theory-of-Change with a Bayesian Analysis is an effective way to test the plausibility of sustainability claims and to mitigate biases. Nevertheless, the method is - in the presented form - also too elaborate and time-consuming for impact reporting in the sustainable finance market.

Description: The food system plays a crucial role in mitigating climate change. Even if fossil fuel emissions are halted immediately, current trends in global food systems may prevent the achieving of the Paris Agreement's climate targets. The high degree of variability and uncertainty involved in calculating diet-related greenhouse gas emissions limits the ability to evaluate reduction potentials to remain below a global warming of 1.5 or 2 degrees. This study assessed Western European dietary patterns while accounting for uncertainty and variability. An extensive literature review provided value ranges for climate impacts of animal-based foods to conduct an uncertainty analysis via Monte Carlo simulation. The resulting carbon footprints were assessed against food system-specific greenhouse gas emission thresholds. The range and absolute value of a diet carbon footprint become larger the higher the amount of products with highly varying emission values in the diet. All dietary pattern carbon footprints overshoot the 1.5 degrees threshold. The vegan, vegetarian, and diet with low animal-based food intake were predominantly below the 2 degrees threshold. Omnivorous diets with more animal-based product content trespassed them. Reducing animal-based foods is a powerful strategy to decrease emissions. However, further mitigation strategies are required to achieve climate goals.

Description: Community-based approaches to natural resource management are being discussed and experienced as promising ways for pursuing ecological conservation and socio-economic development simultaneously. However, the multiplicity of levels, scales, objectives and actors that are involved in sustainability transformations tends to be challenging for such bottom-up approaches. Collaborative and polycentric governance schemes are proposed for dealing with those challenges. What has not been fully explored is how knowledge from local contexts of community-based initiatives can be diffused to influence practices on higher levels and/or in other local contexts. This study explores how theoretical advances in the diffusion of grassroots innovation can contribute to understanding and supporting the diffusion of knowledge and practices from community-based initiatives and proposes a transdisciplinary approach to diffusion. For that aim, we develop an analytical perspective on the diffusion of grassroots innovations that takes into consideration the multiplicity of actors, levels and scales, the different qualities/types of knowledge and practices, as well as their respective contributions. We focus on the multiplicity and situatedness of cognitive frames and conceptualize the diffusion of grassroots innovations as a transdisciplinary process. In this way three different diffusion pathways are derived in which the knowledge and practices of grassroots initiatives can be processed in order to promote their (re)interpretation and (re)application in situations and by actors that do not share the cognitive frame and the local context of the originating grassroots initiative. The application of the developed approach is illustrated through transdisciplinary research for the diffusion of sustainable family farming innovations in Colombia. This conceptualization accounts for the emergence of multiplicity as an outcome of diffusion by emphasizing difference as a core resource in building sustainable futures.

Description: Nigeria is Africa's top cement producer and could be on course to be one of the top producers globally. The goal of this study is to identify and critically examine the pathways available to Nigeria to meet its decarbonisation goals in the cement sector. Based on a literature review, the study assesses demand drivers and decarbonisation potentials for the sector. It then presents two different quantitative pathways for growth in production of cement by 2050, and three different pathways for decarbonisation of the sector. Using published data and a scenario analysis tool, the study calculates how the sector's emissions might evolve under each of these pathways. The results indicate that, in the most ambitious scenario, emissions from the sector can plateau by the late 2030s, resulting in an overall increase of 21% by 2050 (compared to 2015 levels). Achieving this scenario is necessary in order to put the sector on a path to net zero emissions beyond 2050. The scenario is driven by reductions in both energy-related and process emissions, as well as a small share of carbon capture and storage and demand management. A moderately ambitious scenario that relies mostly on savings on energy-related emissions results in an 84% increase in emissions by 2050. Finally, the Business-as-Usual scenario results in an almost tripling of emissions by 2050. The results indicate a strong potential for policies to drive improvements in energy efficiency and clinker-to-cement ratio. Critical areas of uncertainty within the assumptions include the production rates (including the evolution of the export market) and the fuel mix.

Description: The circle is a ubiquitous metaphor in the current scientific and political debate on possible strategies for coping with the changes brought by the so-called "Anthropocene". Terms such as "recycling", "upcycling", "downcycling", "life cycle" or "circular economy" all refer to the same geometric shape, which in turn can be found in numerous diagrams illustrating the respective design approaches and political strategies. But how does the circle shape the way we think and act as designers? Is it an appropriate metaphor to guide us to feasible actions, or is its degree of simplification too far removed from reality? In this article we look at the circular economy as a designed model, and question the circle as a communication tool for the cultural project of sustainability. As the circle may carry the risk of an oversimplified, unattainable, even disillusioning ideal, we discuss various alternative images and forms for their potential to become metaphors of alternative models. The hole, the plate, the pasture, the wheel, the mill wheel, the hamster wheel, the vortex, the double helix, the spider web and the rhizome - as metaphors, they each open up different perspectives and approaches to reality, they each construct different relationships and dependencies between nature and culture. The aim of this article is less about postulating the end of the circle as a metaphor in the sustainability debate, as it is about to fathom the circle's ends as a metaphorical tool. In other words, when does the metaphor of the circle become too abstract? As designers we can say that falling in love with a form right at the beginning of a design process can be rather limiting, as hardly any alternatives will be considered, and all further decisions are subordinated to achieving the desired shape. Therefore, we would like to emphasise the contingency of the circular economy as a model. We would like to welcome the thought that the circle has an "end".

Description: In the coming years, we must set a course that will allow as to protect our climate, reduce resource consumption, and preserve biodiversity. A profound ecological system change is on the horizon in all central areas of action of the economy and society, or transformation arenas. Digitalisation is a prerequisite for the success in this change and will impact these arenas at multiple levels: Digital technologies and applications will make it possible to improve current procedures, processes, and structures (Improve) and help us take the first steps towards new business models and frameworks (Convert). Despite this, digitalisation itself must be effective enough to facilitate a complete ecological restructuring of our society and lives to achieve more far-reaching economic transformation and value creation (Transform). The ability to obtain, link, and use data is a basic prerequisite for tapping into the potential of digitisation for sustainability transformation. However, data is not a homogeneous raw material. Data only gains value when we know the context in which it was collected and when we can use it for a specific purpose. The discussion on what structures and prerequisites are necessary for the system-changing use of data has only just begun. This study was conducted to serve as a starting point for this discussion as it describes the opportunities and prerequisites for a data-based sustainability transformation. This study focuses on environmental data, data from plants, machines, infrastructure, and IoT products. Our task will be to increase the use this data for systemic solutions (system innovation) within transformation arenas where different stakeholders are working together to initiate infrastructure, value chain, and business model transformation.

Description: In material development processes, the question if a new alloy is more sustainable than the existing one becomes increasingly significant. Existing studies on metals and alloys show that their composition can make a difference regarding the environmental impact. In this case study, a recently developed air hardening forging steel is used to produce a U-bolt as an example component in automotive engineering. The production process is analyzed regarding the environmental performance and compared with the standard quench and tempering steels 42CrMo4 and 33MnCrB5-2. The analysis is based on results from applying the method of Life Cycle Assessment. First, the production process and the alterations on material, product, and process level are defined. The resulting process flows were quantified and attributed with the environmental impacts covering Carbon Footprint, Cumulative Energy Demand, and Material Footprint as they represent best the resource-, energy- and thus carbon-intensive steel industry. The results show that the development of the air hardening forging steel leads to a higher environmental impact compared to the reference alloys when the material level is considered. Otherwise, the new steel allows changes in manufacturing process, which is why an additional assessment on process level was conducted. It is seen that the air hardening forging steel has environmental savings as it enables skipping a heat treatment process. Superior material characteristics enable the application of lightweight design principles, which further increases the potential environmental savings. The present work shows that the question of the environmental impact does not end with analyzing the raw material only. Rather, the entire manufacturing process of a product must be considered. The case study also shows methodological questions regarding the specification of steel for alloying elements, processes in the metalworking industry and the data availability and quality in Life Cycle Assessment.

Description: In Argentina, renewable energies are promoted as a way of decarbonising the electricity mix and providing reliable energy services. The national goal is to generate 20% of electricity from renewable sources by 2025. However, despite significant natural potential, solar photovoltaic still represents only a small share of Argentina's total electricity generation. Although this picture may look bleak, a wide range of market segments relating to decentralised photovoltaic generation in Argentina have developed. The general objective of this study is to examine the dynamics that currently enable or constrain the diffusion of distributed photovoltaic systems in Argentina. By applying the Technical Innovation System (TIS) approach, the aim is to understand which functions of the system are strong/weak and how these are influenced by endogenous/exogenous system strengths and weaknesses. To that end, a mixed method research strategy is applied. The exploratory sequential research design allows first to explore system strengths and weaknesses based on qualitative approaches, and then to further analyse the contextual embeddedness and the level of importance of the identified variables using quantitative survey instruments. Thereby, this study provides an important analytical method that contributes to a more nuanced understanding of the interdependencies of the TIS. The empirical results indicate that system weaknesses are shaped to a large extent by the overall contextual dynamics - such as political instability, energy subsidies and high inflation rates. System strengths relate to both the TIS itself (particularly knowledge development through pilot projects and market formation through provincial and national support programmes), to contextual relationships (linked to the availability of educational institutions that enable the rapid diffusion of knowledge) and to the importance of rural areas as protected spaces for the application of photovoltaic systems. Consequently, the study highlights the challenges to overcome for the broader diffusion of distributed photovoltaic generation.

Description: In warm and hot climates, ceiling fans and/or air conditioners (ACs) are used to maintain thermal comfort. Ceiling fans provide air movement near the skin, which enhances the evaporation of sweat, reduces heat stress, and enhances thermal comfort. This is also called the cooling effect. However, AC usage behaviour and the effects of elevated air speed through the use of ceiling fans on indoor operative temperature during AC usage are not widely studied. This study investigated the optimum AC (cooling) set point temperature and air velocity necessary for maintaining thermal comfort while achieving energy conservation, in mixed-mode buildings in India, through field studies by using used custom-built Internet of Things (IOT) devices. In the current study, the results indicate a 79% probability that comfort conditions can be maintained by achieving a temperature drop of 3K. If this drop can be achieved, as much as possible, through passive measures, the duration of AC operation and its energy consumption are reduced, at least by 67.5 and 58.4%, respectively. During the air-conditioned period, there is a possibility that the cooing effect is reduced because of increase in operative temperature due to ceiling fan operation. Therefore, the optimum solution is to maintain the highest AC set point and minimum fan speed setting that are acceptable.

Description: The number of input-output assessments focused on energy has grown considerably in the last years. Many of these assessments combine data from multi-regional input-output (MRIO) databases with energy extensions that completely or partially depict the different stages through which energy products are supplied or used in the economy. The improper use of some energy extensions can lead to double accounting of some energy flows, but the frequency with which this happens and the potential impact on the results are unknown. Based on a literature review, we estimate that around a quarter of the MRIO-based energy assessments reviewed incurred into double accounting. Using the EXIOBASE MRIO database, we also analyse the effects of double accounting in the absolute values and rankings of different countries' and products' energy footprints. Building on the insights provided by our analysis, we offer a set of key recommendations to MRIO users to avoid the double accounting problem in the future. Likewise, we conclude that the harmonisation of the energy data across MRIO databases led by experts could simplify the choices of the data users until the provision of official energy extensions by statistical offices becomes a widespread practice.

Description: By use of macro-economic model EXIOMOD, the expected impacts of actions described in the Strategic Research and Innovation Agenda (SRIA) have been analyzed. The results of this analysis show that the R&I actions described in the SRIA contribute to decoupling economic growth from resource use. The actions are expected to cause an increasing gross domestic product and a decreasing raw material demand. This results in an increasing extracted resource productivity, a measure used to show the decoupling of economic growth and resource use. It can however be questioned whether the actions in the SRIA - or the measures implemented in the model - assume a strong enough pace for decoupling economic growth and material use. The actions contribute to the climate goals of the European Commission, by showing a pathway through which the emissions of greenhouse gas can be reduced.

Description: Roadmaps for India's energy future foresee that coal power will continue to play a considerable role until the middle of the 21st century. Among other options, carbon capture and storage (CCS) is being considered as a potential technology for decarbonising the power sector. Consequently, it is important to quantify the relative benefits and trade-offs of coal-CCS in comparison to its competing renewable power sources from multiple sustainability perspectives. In this paper, we assess coal-CCS pathways in India up to 2050 and compare coal-CCS with conventional coal, solar PV and wind power sources through an integrated assessment approach coupled with a nexus perspective (energy-cost-climate-water nexus). Our levelized costs assessment reveals that coal-CCS is expensive and significant cost reductions would be needed for CCS to compete in the Indian power market. In addition, although carbon pricing could make coal-CCS competitive in relation to conventional coal power plants, it cannot influence the lack of competitiveness of coal-CCS with respect to renewables. From a climate perspective, CCS can significantly reduce the life cycle GHG emissions of conventional coal power plants, but renewables are better positioned than coal-CCS if the goal is ambitious climate change mitigation. Our water footprint assessment reveals that coal-CCS consumes an enormous volume of water resources in comparison to conventional coal and, in particular, to renewables. To conclude, our findings highlight that coal-CCS not only suffers from typical new technology development related challenges - such as a lack of technical potential assessments and necessary support infrastructure, and high costs - but also from severe resource constraints (especially water) in an era of global warming and the competition from outperforming renewable power sources. Our study, therefore, adds a considerable level of techno-economic and environmental nexus specificity to the current debate about coal-based large-scale CCS and the low carbon energy transition in emerging and developing economies in the Global South.

Description: Water availability plays an important role in the expansion planning of utility-scale solar power plants, especially in the arid regions of the Middle East and North Africa. Although these power plants usually account for only a small fraction of local water demand, competition for water resources between communities, farmers, companies, and power suppliers is already emerging and is likely to intensify in future. Despite this, to date there has been a lack of comprehensive studies analyzing interdependencies and potential conflicts between energy and water at local level. This study addresses this research gap and examines the linkages between water resources and energy technologies at local level based on a case study conducted in Ouarzazate, Morocco, where one of the largest solar power complexes in the world was recently completed. To better understand the challenges faced by the region in light of increased water demand and diminishing water supply, a mixed-method research design was applied to integrate the knowledge of local stakeholders through a series of workshops. In a first step, regional socio-economic water demand scenarios were developed and, in a second step, water saving measures to avoid critical development pathways were systematically evaluated using a participatory multi-criteria evaluation approach. The results are a set of water demand scenarios for the region and a preferential ranking of water saving measures that could be drawn upon to support decision-making relating to energy and water development in the region.

Description: Agriculture is an economic sector with massive impact on biodiversity and agrobiodiversity. Sustainable diets represent a critical policy leverage and a realistic opportunity to reduce the environmental impact of the agro-food sector while improving human health at the same time. Eating out is an increasingly common habit for many consumers and, by offering sustainable dishes, catering companies can play a central role. To do this, they need to understand and correctly assess the sustainability of their food portfolio, but assessment tools are not well established yet. The NAHGAST project, of which this study was part, developed and tested a sustainability assessment tool for catering companies based on concrete targets defined per meal. This study addresses the lack of methods to evaluate the impact of food on biodiversity, with a particular focus on agrobiodiversity. The work illustrates a context-specific application of an enhanced DPSIR model to structure information and select indicators, and proposes a transdisciplinary use of existing metrics. Further research is needed in order to define scientifically sound target values or sustainability ranges for each indicator per meal, in order to calculate them. Strengths and limits of the study are discussed.

Description: Non-residential buildings in the European Union consume more than one third of the building sector's total. Many non-residential buildings are owned by municipalities. This paper reports about an energy saving competition that was carried out in 91 municipal buildings in eight EU member states in 2019. For each public building an energy team was formed. The energy teams' activities encompassed motivating changes in the energy use behaviour of employees and small investments. Two challenges added an element of gamification to the energy saving competition. To assess the success of the energy saving competition, an energy performance baseline was calculated using energy consumption data of each public building from previous years. Energy consumption in the competition year was monitored on a monthly base. After the competition the top energy savers from each country were determined by the percentage-based reduction of energy consumption compared to the baseline. On average, the buildings had an electricity and heat consumption in 2019 that was about 8 % and 7 %, respectively, lower than the baseline. As an additional data source for the evaluation, a survey among energy team members was conducted at the beginning and after the energy competition. Support from superiors, employee interest and motivation and behaviour change as assessed by energy team members show a positive, if weak or moderate, correlation with changes in electricity consumption, but not with changes in heat consumption.

Description: Nowadays, high expectations are set for a digitally enabled circular economy (CE), to enhance resource efficiency. Tracing, tracking, and storing information is most important for this. In this paper, the application of Internet of Things (IoT) and Distributed Ledger Technology (Blockchain) are hence discussed by presenting the case of professional Electrical and Electronic Equipment (EEE) in Italy. Within the context of CE, prevention of electronic waste (WEEE) is extremely relevant as it is a fast-growing waste stream, and the products contain environmentally damaging substances as well as valuable and rare materials. The use of a proper combination of IoT and blockchain can help the producers to keep control on products until EEE end-of-life, while promoting CE strategies and supporting decision-making. Based on the outcomes of five interviews conducted in 2019 to companies of the EEE sector, potential improvements in the EEE end-of-use management are discussed. After providing the definition of requirements for both the technical solution and its testing are provided, three solution variations and the related business models are created and presented, as well as considerations on their environmental and economic impacts. The study shows how digital technologies can support the appropriate and circular management of EEE products and WEEE.

Description: Electronics containing growing quantities of high value and critical metals are increasingly used in automobiles. The conventional treatment practice for end-of-life vehicles (ELV) is shredding after de-pollution and partial separation of spare parts. Despite opportunities for resource recovery, the selective separation of components containing relevant amounts of critical metals for the purpose of material recycling is not commonly implemented. This article is aimed to contribute to recycling strategies for future critical metal quantities and the role of extended material recovery from ELVs. The study examines the economic feasibility of dismantling electronic components from ELVs for high value metal recycling. The results illustrate the effects of factors as dismantling time, labour costs and logistics on the economic potential of resource recovery from ELVs. Manual dismantling is profitable for only a few components at the higher labour costs in western/northern parts of Europe and applicable material prices, including the inverter for hybrid vehicles, oxygen sensor, side assistant sensor, distance and near distance sensors. Depending on the vehicle model, labour costs and current material prices, manual dismantling can also be cost-efficient for also some other such as the heating blower, generator, starter, engine and transmission control, start/stop motor, drive control, infotainment and chassis control.

Description: Cities and urban consumers play a central role in the transition to a decarbonized society. Building on existing studies that identify the significant contributions of lifestyle changes, this study proposes a practical methodology for modeling and exploring city-specific carbon footprint reduction pathways through lifestyle changes to decarbonization. It uses an input-output approach with mixed-unit consumption data and the concept of adoption rates, which is applicable to multiple cities with widely available subnational household consumption data. This paper illustrates the use of this methodology by exploring the consumption-based mitigation pathways of 52 Japanese cities with 65 lifestyle change options covering mobility, housing, food, consumer goods, and leisure domains. The results revealed that city-specific impacts of a variety of lifestyle change options can differ by as much as a factor of five among cities, even in the urban context within the same country. Due to this city-level heterogeneity, the priority options of decarbonized lifestyles, such as among shared mobility, low-carbon diets, and longevity of consumer goods, have shifted between cities. The analysis suggests that ambitious urban lifestyle changes can potentially reduce their carbon footprints to meet the 1.5 ℃ target. However, due to the overlaps of mitigation potentials between multiple lifestyle change options, the necessary levels of adoption and coverage are extensive (i.e., adoption rates of 0.6-0.9). Importantly, adopting lifestyle changes with an efficiency strategy (e.g., the introduction of end-use technologies) or sufficiency strategy (e.g., behavioral changes in consumption amounts and modes) alone is not enough; the only way to succeed is through the combination of both strategies. This paper calls for a target-based exploration and identification of city-specific priorities of lifestyle change options to facilitate consumption-oriented mitigation policies and stakeholder actions to address the climate impacts of urban consumption.

Description: To what extent can designers direct their professional practices towards serving the common good? Design constitutes itself anew with every project. Each project is both conditioned and made possible through a unique constellation of actors, timeframes, objectives, skills, etc. which arise from both social values and political agendas. We discuss the different approaches of two selected design projects by the authors, and the respective strategies and methods. While the designers' ambition in both projects was certainly to change an existing situation into a preferred one - the first by the means of interactive user engagement, the second through the idea of semi-finished product semantics - we emphasize on the challenges and ambiguities arising from the evolutionary process of design, aiming at the common good. Eventually we conclude that design processes can serve as a tool to debate rather than create the common good.

Description: Flexible, system-oriented operating strategies are becoming increasingly important in terms of achieving a climate-neutral energy system transformation. Solid-oxide electrolysis (SOEC) can play an important role in the production of green synthesis gas from renewable energy in the future. Therefore, it is important to investigate the extent to which SOEC can be used flexibly and which feedback effects and constraints must be taken into account. In this study, we derived a specific load profile from an energy turnaround scenario that supports the energy system. SOEC short-stacks were operated and we investigated the impact that the load profile has on electrical stack performance and stack degradation as well as the product gas composition by means of Fourier-transform infrared spectroscopy. The stacks could follow the grid-related requirement profiles of secondary control power and minute reserves very well with transition times of less than two minutes per 25% of relative power. Only short-term disturbances of the H2/CO ratio were observed during transitions due to the adjustment of feed gases. No elevated degradation effects resulting from flexible operation were apparent over 1300 h, although other causes of degradation were present.

Description: Local implementation projects for sector coupling play an important role in the transformation to a more sustainable energy system. Despite various technical possibilities, there are various barriers to the realisation of local projects. Against this backdrop, we introduce an inter- and transdisciplinary approach to identifying and evaluating different power-to-X paths as well as setting up robust local implementation projects, which account for existing drivers and potential hurdles early on. After developing the approach conceptually, we exemplify our elaborations by applying them to a use case in the German city of Wuppertal. It can be shown that a mix of several interlinked interdisciplinary methods as well as several participatory elements is suitable for triggering a collective, local innovation process. However, the timing and extent of end-user integration remain a balancing act. The paper does not focus on a detailed description of power-to-X (PtX) as a central pillar of the sustainable transformation of the energy system. Rather, it focuses on the innovative methodological approach used to select a suitable use path and design a corresponding business model. The research approach was successfully implemented in the specific case study. However, it also becomes clear that the local-specific consideration entails limitations with regard to the transferability of the research design to other spatial contexts.

Description: We conduct a systematic, interdisciplinary review of empirical literature assessing evidence on induced innovation in energy and related technologies. We explore links between demand-drivers (both market-wide and targeted); indicators of innovation (principally, patents); and outcomes (cost reduction, efficiency, and multi-sector/macro consequences). We build on existing reviews in different fields and assess over 200 papers containing original data analysis. Papers linking drivers to patents, and indicators of cumulative capacity to cost reductions (experience curves), dominate the literature. The former does not directly link patents to outcomes; the latter does not directly test for the causal impact of on cost reductions). Diverse other literatures provide additional evidence concerning the links between deployment, innovation activities, and outcomes. We derive three main conclusions. (1) Demand-pull forces enhance patenting; econometric studies find positive impacts in industry, electricity and transport sectors in all but a few specific cases. This applies to all drivers - general energy prices, carbon prices, and targeted interventions that build markets. (2) Technology costs decline with cumulative investment for almost every technology studied across all time periods, when controlled for other factors. Numerous lines of evidence point to dominant causality from at-scale deployment (prior to self-sustaining diffusion) to cost reduction in this relationship. (3) Overall Innovation is cumulative, multi-faceted, and self-reinforcing in its direction (path-dependent). We conclude with brief observations on implications for modeling and policy. In interpreting these results, we suggest distinguishing the economics of active deployment, from more passive diffusion processes, and draw the following implications. There is a role for policy diversity and experimentation, with evaluation of potential gains from innovation in the broadest sense. Consequently, endogenising innovation in large-scale models is important for deriving policy-relevant conclusions. Finally, seeking to relate quantitative economic evaluation to the qualitative socio-technical transitions literatures could be a fruitful area for future research.

Description: Cross-country evidence on the adoption of energy-efficient retrofit measures (EERMs) in residential buildings is critical to supporting the development of national and pan-European policies aimed at fostering the energy performance upgrade of the building stock. In this light, the aim of this paper is to advance in the understanding of the probability of certain EERMs taking place in eight EU countries, according to a set of parameters, such as building typology, project types, and motivation behind the project. Using these parameters collected via a multi-country online survey, a set of discrete-choice (conditional logit) models are estimated on the probability of selecting a choice of any combination of 33 EERMs across the sampled countries. Results show that actions related to the building envelope are the most often-addressed across countries and single building elements or technology measures have a higher probability of being implemented. The modelling framework developed in this study contributes to the scientific community in three ways: (1) establishing an empirical relationship among EERMs and project (i.e., retrofit and deep retrofit), (2) identifying commonalities and differences across the selected countries, and (3) quantifying the probabilities and market shares of various EERMs.

Description: This paper presents an approach for assessing lifestyle carbon footprints and lifestyle change options aimed at achieving the 1.5 °C climate goal and facilitating the transition to decarbonized lifestyles through stakeholder participatory research. Using data on Finland and Japan it shows potential impacts of reducing carbon footprints through changes in lifestyles for around 30 options covering food, housing, and mobility domains, in comparison with the 2030 and 2050 per-capita targets (2.5-3.2 tCO2e by 2030; 0.7-1.4 tCO2e by 2050). It discusses research opportunities for expanding the footprint-based quantitative analysis to incorporate subnational analysis, living lab, and scenario development aiming at advancing sustainability science on the transition to decarbonized lifestyles.

Description: The first step of complete transformation will be utilizing digital technologies and applications to improve current procedures, processes, and structures (Improve). Next, complete digitalisation will pave the way for new business models and framework conditions (Convert). Finally, comprehensive transformation of the economy and value creation will ensure the effective reorientation of society and lifestyles towards sustainability (Transform). This last step is critical for a successful ecological transformation, or a "green transformation", must be placed front and centre during international debate. Through this report, we aim to highlight and discuss the opportunities that digitalisation can bring to Germany. In particular, we will discuss three exemplary areas of ecological transformation where action is necessary: 1) A digital and circular economy that uses data to increase resource efficiency. 2) Intelligent, sustainable mobility that connects us in eco-friendly ways. 3) Transparent transitions towards sustainable food chains and agriculture. This report represents the first phase of the Shaping Digital Transformation project. In this report, we will outline the framework of our project to create a starting point for further debates.

Description: A clear understanding of socio-technical interdependencies and a structured vision are prerequisites for fostering and steering a transition to a fully renewables-based energy system. To facilitate such understanding, a phase model for the renewable energy transition in MENA countries has been developed and applied to the country case of Algeria. It is designed to support the strategy development and governance of the energy transition and to serve as a guide for decision makers. The analysis shows that Algeria has already taken first steps towards a renewable energy transition. According to the MENA phase model, Algeria can be classified as entering the "Take-Off Renewables" phase. Nevertheless, fossil fuels still play a dominant role in the Algerian energy sector and in the economy as a whole. To support the renewables take-off, strong support is therefore needed at all levels. Only then can the necessary framework conditions be created to encourage participation and to attract investment from the private sector. To this end, a long-term energy strategy should to be developed that takes into account the renewable energy potential to support an efficient transformation of the Algerian energy supply and enables a smooth transition.

Description: The basic materials industries are a cornerstone of Europe's economic prosperity, increasing gross value added and providing around 2 million high-quality jobs. But they are also a major source of greenhouse gas emissions. Despite efficiency improvements, emissions from these industries were mostly constant for several years prior to the Covid-19 crisis and today account for 20 per cent of the EU's total greenhouse gas emissions. A central question is therefore: How can the basic material industries in the EU become climate-neutral by 2050 while maintaining a strong position in a highly competitive global market? And how can these industries help the EU reach the higher 2030 climate target - a reduction of greenhouse gas emissions of at least 55 per cent relative to 1990 levels? In the EU policy debate on the European Green Deal, many suppose that the basic materials industries can do little to achieve deep cuts in emissions by 2030. Beyond improvements to the efficiency of existing technologies, they assume that no further innovations will be feasible within that period. This study takes a different view. It shows that a more ambitious approach involving the early implementation of key low-carbon technologies and a Clean Industry Package is not just possible, but in fact necessary to safeguard global competitiveness.

Description: Especially in the arid areas of the Middle East and North Africa (MENA), water availability plays an important role in the expansion planning of industrial-scale solar power plants. Although power plants may account for only a very small portion of local water demand, competition for water with other sectors is expected to increase when water resources are insufficient for meeting local needs. This can lead to conflicts between different users (such as communities, farmers, tourism, businesses and utilities). Despite the increasing attention on the water-energy nexus, comprehensive studies analysing the interdependencies and potential conflicts between energy and water at the local level are absent. To examine the linkages between water resources and energy technologies at the local level, this case study was selected because Morocco is one of the countries most affected by water scarcity and, at the same time, it is also one of the most promising countries in North Africa for the development of renewable energies and offers excellent conditions for solar and wind power plants. Nevertheless, the country's electricity system is still largely based on conventional energy sources, and the country is more than 95% dependent on energy imports. To strengthen the country's energy security and reduce the financial burden associated with energy imports, Morocco is pursuing an ambitious renewable energy expansion strategy: by 2020, around 42% of the national electricity demand should be met by renewable energies. In view of Morocco's ambitious plans, it is particularly important to identify the potential conflicts and synergies resulting from the expansion of renewable energies in relation to the water sector.

Description: The energy sector today accounts for about 10% to 15% of global freshwater withdrawal. Most water in the energy sector is used for generating electricity, especially for cooling processes in thermal power plants. At the same time the demand for electricity is expected to increase significantly due to population growth and economic development in emerging and developing economies. Growing demand is also driven by electrification strategies pursued by industrialized countries to decarbonize their economies. With the global demand for electricity expected to increase significantly in the coming decades also the water demand in the power sector is expected to rise. However, due to the on-going global energy transition, the future structure of the power supply - and hence future water demand for power generation - is subject to high levels of uncertainty because the volume of water required for electricity generation varies significantly depending on both the generation technology and cooling system. In light of these challenges the objective of this analysis is to provide more systematic and robust answers in terms of the impacts of different decarbonization strategies in the electricity sector on water demand at global and regional level. The focus is on operational water use for electricity generation.

Description: This report was prepared by the Wuppertal Institute in cooperation with the German Economic Institute as part of the SCI4climate.NRW project. The report aims to shed light on the possible phenomenon that the availability and costs of "green" energy sources may become a relevant location factor for basic materials produced in a climate-neutral manner in the future. For this purpose, we introduce the term "Renewables Pull". We define Renewables Pull as the initially hypothetical phenomenon of a shift of industrial production from one region to another as a result of different marginal costs of renewable energies (or of secondary energy sources or feedstocks based on renewable energies). Shifts in industrial production in the sense of Renewables Pull can in principle be caused by differences in the stringency of climate policies in different countries, as in the case of Carbon Leakage. Unlike Carbon Leakage, however, Renewables Pull can also occur if similarly ambitious climate policies are implemented in different countries. This is because Renewables Pull is primarily determined by differences in the costs and availability of renewable energies. In addition, Renewables Pull can also be triggered by cost reductions of renewable energies and by changing preferences on the demand side towards climate-friendly products. Another important difference to Carbon Leakage is that the Renewables Pull effect does not necessarily counteract climate policy. Similar to Carbon Leakage, it is to be expected that Renewables Pull could become relevant primarily for very energy-intensive products in basic materials industries. In these sectors (e.g. in the steel or chemical industry), there is also the possibility that relocations of specific energy-intensive parts of the production process could trigger domino effects. As a result, large parts of the value chains previously existing in a country or region could also be subjected to an (indirect) Renewables Pull effect. For the federal state of NRW, in which the basic materials industry plays an important role, the possible emergence of Renewables Pull is associated with significant challenges as climate policy in Germany, the EU and also worldwide is expected to become more ambitious in the future. This report aims to enable and initiate a deeper analysis of the potential future developments and challenges associated with the Renewables Pull effect. Thus, in the final chapter of the report, several research questions are formulated that can be answered in the further course of the SCI4climate.NRW project as well as in other research projects.

Description: The expansion of photovoltaics in German cities has so far fallen short of expectations. The concept of "tenant electricity" ("Mieterstrom" in German), in which tenants of a building are supplied with solar power produced on site, offers great potential here. A study on behalf of the German Federal Ministry for Economic Affairs and Energy estimated the number of tenant households with good conditions for solar tenant electricity at 3.8 million. At the same time, the federal tenant electricity promotion scheme has been in place since 2017, but only about 1% of the annual budget has been claimed. The aim of this study is to identify the barriers for and drivers of diffusion of the tenant electricity model. To this end, a qualitative document analysis and a range of semi-structured expert interviews have been conducted. The theoretical framework used to guide the analysis is the multi-level perspective. The main barrier found for tenant electricity diffusion is the legal framework on the regime level, which also leads to high transaction costs of implementing tenant electricity. A social barrier is the inertia of some residents to actively concern themselves with their electricity supply and switch to a tenant electricity contract. Among its drivers are long-term trends such as the increasing electricity demand in urban areas, technical developments like blockchain technology and the increasing deployment of smart meters, and the EU Renewable Energy Directive. As long as the restrictive legal framework prevails, the further diffusion of tenant electricity will remain limited.

Description: Practices and research on measuring traditionally urban sustainability abound, therefore the challenge now is related to how the urban carbon issues are included into current measuring methods, thus there is a need to develop methods for measuring urban low-carbon sustainability. In this paper, a simple method, which is based on low-carbon sustainability index, is developed. The overall urban low-carbon sustainability index is the weighted sum of 11 single indices, and each single index is defined as the indicator assessing the development level against the baseline. The baseline is often the criteria or the minimum requirement of low-carbon sustainability. Case studies in four Chinese cities have put this method into practice, and the results show that all four selected cities fail to pass the testing of sensible low-carbon sustainability rule and they are all in weakly low-carbon sustainable development. Although the four cities have made great progress in their capacity building on pollution control and their capacities on wastewater treatment, main pollutants' removal and household and hazardous wastes treatment are enough to meet the needs of local development, they are all facing the great challenges on using of sustainable energy, offsetting of CO2 emissions and adoptions of nature-based solutions. The method developed by this research is a useful tool for decision makers identifying whether the local development is not on a low-carbon sustainable path.

Description: A clear understanding of socio-technical interdependencies and a structured vision are prerequisites for fostering and steering a transition to a fully renewables-based energy system. To facilitate such understanding, a phase model for the renewable energy (RE) transition in the Middle East and North Africa (MENA) countries has been developed and applied to the country case of Tunisia. It is designed to support the strategy development and governance of the energy transition and to serve as a guide for decision makers. The analysis shows that Tunisia has already taken important steps towards a RE transition. According to the MENA phase model, Tunisia can be classified as being in the "Take-Off Renewables" phase. Nevertheless, natural gas still plays the dominant role in Tunisia's highly subsidised electricity generation. In addition to the elevated political uncertainty, there are numerous structural, political, social, and economic challenges within the energy sector that hinder progress in the transition to REs. Strong support at all levels is needed to promote the breakthrough of RE. This includes more detailed long-term planning and improving the regulatory framework, as well as reducing offtaker risks to improve the bankability of RE projects in order to attract private investment. Furthermore, institutional buy-in needs to be increased and the engagement of key non-state stakeholders must be strengthened. In light of the growing domestic energy demand and with the on-going global decarbonisation efforts in favour of sustainable fuels, Tunisia would be well advised to embark on a sustainable energy path sooner rather than later to seize economic opportunities that can arise from RE development.

Description: The recently finalized research project "ZRR for municipal waste" aimed at testing and evaluating the automation of municipal waste sorting plants by supplementing or replacing manual sorting, with sorting by a robot with artificial intelligence (ZRR). The objectives were to increase the current recycling rates and the purity of the recovered materials; to collect additional materials from the current rejected flows; and to improve the working conditions of the workers, who could then concentrate on, among other things, the maintenance of the robots. Based on the empirical results of the project, this paper presents the main results of the training and operation of the robotic sorting system based on artificial intelligence, which, to our knowledge, is the first attempt at an application for the separation of bulky municipal solid waste (MSW) and an installation in a full-scale waste treatment plant. The key questions for the research project included (a) the design of test protocols to assess the quality of the sorting process and (b) the evaluation of the performance quality in the first six months of the training of the underlying artificial intelligence and its database.

Description: Cities are becoming digital and are aiming to be sustainable. How they are combining the two is not always apparent from the outside. What we need is a look from inside. In recent years, cities have increasingly called themselves Smart City. This can mean different things, but generally includes a look towards new digital technologies and claim that a Smart City has various advantages for its citizens, roughly in line with the demands of sustainable development. A city can be seen as smart in a narrow sense, technology wise, sustainable or smart and sustainable. Current city rankings, which often evaluate and classify cities in terms of the target dimensions 2smart" and "sustainable", certify that some cities are both. In its most established academic definitions, the Smart City also serves both to improve the quality of life of its citizens and to promote sustainable development. Some cities have obviously managed to combine the two. The question that arises is as follows: What are the underlying processes towards a sustainable Smart City and are cities really using smart tools to make themselves sustainable in the sense of the 2015 United Nations Sustainability Goal 11? This question is to be answered by a method that has not yet been applied in research on cities and smart cities: the innovation biography. Based on evolutionary economics, the innovation biography approaches the process towards a Smart City as an innovation process. It will highlight which actors are involved, how knowledge is shared among them, what form citizen participation processes take and whether the use of digital and smart services within a Smart City leads to a more sustainable city. Such a process-oriented method should show, among other things, to what extent and when sustainability-relevant motives play a role and which actors and citizens are involved in the process at all.

Description: The demand for metals from the entire periodic table is currently increasing due to the ongoing digitalization. However, their use within electrical and electronic equipment (EEE) poses problems as they cannot be recovered sufficiently in the end-of-life (EoL) phase. In this paper, we address the unleashed dissipation of metals caused by the design of EEE for which no globally established recycling technology exists. We describe the European Union's (EU) plan to strive for a circular economy (CE) as a political response to tackle this challenge. However, there is a lack of feedback from a design perspective. It is still unknown what the implications for products would be if politics were to take the path of a CE at the level of metals. To provide clarification in this respect, a case study for indium is presented and linked to its corresponding recycling-metallurgy of zinc and lead. As a result, a first material-specific rule on the design of so-called "anti-dissipative" products is derived, which actually supports designing EEE with recycling in mind and represents an already achieved CE on the material level. In addition, the design of electrotechnical standardization is being introduced. As a promising tool, it addresses the multi-dimensional problems of recovering metals from urban ores and assists in the challenge of enhancing recycling rates. Extending the focus to other recycling-metallurgy besides zinc and lead in further research would enable the scope for material-specific rules to be widened.

Description: Supply risks and environmental concerns drive the interest in critical raw material recycling in the European Union. Globally, waste electrical and electronic equipment (WEEE) is projected to increase by almost 40% until 2030. This waste stream can be a source of secondary raw materials. The determination of the economic feasibility of recycling and recovering specific materials is a data-intensive, time-consuming, and case-specific task. This study introduced a two-part evaluation scheme consisting of upper continental crust concentrations and raw material prices as a simple tool to indicate the potential and limitations of critical raw material recycling. It was applied to the case of light-emitting diodes (LED) lamps in the EU. A material flow analysis was conducted, and the projected waste amounts were analyzed using the new scheme. Indium, gallium, and the rare earth elements appeared in low concentrations and low absolute masses and showed only a small revenue potential. Precious metals represented the largest revenue share. Future research should confirm the validity and usefulness of the evaluation scheme.

Description: The development of digital technologies is accelerating, enabling increasingly profound changes in increasingly short time periods. The changes affect almost all areas of the economy as well as society. The energy sector has already seen some effects of digitalization, but more drastic changes are expected in the next decades. Besides the very positive impacts on costs, system stability, and environmental effects, potential obstacles and risks need to be addressed to ensure that advantages can be exploited while adverse effects are avoided. A good understanding of available and future digital applications from different stakeholders' perspectives is necessary. This study proposes a framework for the holistic evaluation of digital applications in the energy sector. The framework consists of a combination of well-established methods, namely the multi-criteria analysis (MCA), the life cycle assessment (LCA), and expert interviews. The objective is to create transparency on benefits, obstacles, and risks as a basis for societal and political discussions and to supply the necessary information for the sustainable development and implementation of digital applications. The novelty of the proposed framework is the specific combination of the three methods and its setup to enable sound applicability to the wide variety of digital applications in the energy sector. The framework is tested subsequently on the example of the German smart meter roll-out. The results reveal that, on the one hand, the smart meter roll-out clearly offers the potential to increase the system stability and decrease the carbon emission intensity of the energy system. Therefore, the overall evaluation from an environmental perspective is positive. However, on the other hand, close attention needs to be paid to the required implementation and operational effort, the IT (information technology) and data security, the added value for the user, the social acceptance, and the realization of energy savings. Therefore, the energy utility perspective in particular results in an overall negative evaluation. Several areas with a need for action are identified. Overall, the proposed framework proves to be suitable for the holistic evaluation of this digital application.

Description: A clear understanding of socio-technical interdependencies and a structured vision are prerequisites for fostering and steering a transition to a fully renewables-based energy system. To facilitate such understanding, a phase model for the renewable energy (RE) transition in the Middle East and North Africa (MENA) countries has been developed and applied to the country case of Jordan. It is designed to support the strategy development and to serve as a guide for decision-makers. The analysis shows that Jordan has taken essential steps towards a RE transition. According to the MENA energy transition phase model, Jordan can be classified as being in a transitional stage between the first phase, "Take-Off Renewables", and the second phase, "System Integration". However, fossil fuels continue to play a dominant role in the Jordanian energy sector, and the fluctuating world market prices for fossil fuels impact the economy. The expansion of domestically produced RE could significantly contribute to reducing Jordan's high imports of fossil fuels. This simultaneously increases energy security and reduces the trade deficit. To move towards a sustainable energy system, Jordan needs to embrace comprehensive flexibility measures. These include developing storage options, improving load management, upgrading the existing grid infrastructure, enhancing energy efficiency, exploring the electrification of end use sectors, and creating strong cooperation between stakeholders.