ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Maps
  • Other Sources  (2,047)
  • STRUCTURAL MECHANICS  (1,192)
  • COMPOSITE MATERIALS  (855)
  • 1980-1984  (2,047)
  • 1
    facet.materialart.
    Unknown
    Finite element modelling of buried structures (1984)
    In:  CASI
    Details
    Publication Date: 2005-03-28
    Description: In many structures the final stress states are dependent on the sequence of construction or the stress states at various stages of construction are of interest. Such problems can be analyzed using finite element programs that have the capability of adding (birthing) elements to simulate the progress of construction. However, the usual procedure of assembling elements may lead to numerical instabilities or stress states that are unrealistic. Both problems are demonstrated in the analysis of a structure using the program ADINA. A technique which combines application of a preload with element birthing to overcome these problems is described and illustrated.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Dyn., 1984; p 395-404
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 2
    facet.materialart.
    Unknown
    Single-drop impact damage prediction for low density, coated ceramic materials (1984)
    In:  CASI
    Details
    Publication Date: 2005-03-28
    Description: A technique utilizing finite element analysis, liquid impact kinematics, and momentum theory is described and compared to single-drop impact test data performed on various configurations of coated ceramic material. The method correlates well with test data and is useful in predicting the single-drop impact damage velocity threshold for low-density, coated ceramic materials.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Dyn., 1984; p 385-393
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 3
    facet.materialart.
    Unknown
    Simulation of contact surface erosion for impact problems (1984)
    In:  CASI
    Details
    Publication Date: 2005-03-28
    Description: An algorithm is outlined for simulating the contact surface erosion for impact problems. The algorithm dynamically relocates the contact surface as projectile and target materials exceed their failure criterion. Example computations of axisymmetric and oblique impacts are compared with experimental data.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Dyn., 1984; p 315-324
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 4
    facet.materialart.
    Unknown
    Response and characteristics of structures subjected to S-H waves (1984)
    In:  CASI
    Details
    Publication Date: 2005-03-28
    Description: A study of the dynamic characteristics of a coupled translational-rotational system is given. The formulation of the problem considers the soil-structure interaction effects by utilizing the impedance functions at the foundation of a structure. Due to the fact that the coefficient matrix in the characteristic equation is frequency dependent in nature, iterations have to be performed to find the nature frequencies of the system. Examples and discussions are presented. Comparisons of the analytical results from various approaches are also given.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Dyn., 1984; p 289-296
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 5
    facet.materialart.
    Unknown
    Nonlinear dynamic analysis of sandwich panels (1984)
    In:  CASI
    Details
    Publication Date: 2005-03-28
    Description: Two analytical techniques applicable to large deflection dynamic response calculations for pressure loaded composite sandwich panels are demonstrated. One technique utilizes finite element modeling with a single equivalent layer representing the face sheets and core. The other technique utilizes the modal analysis computer code DEPROP which was recently modified to include transverse shear deformation in a core layer. The example problem consists of a simply supported rectangular sandwich panel. Included are comparisons of linear and nonlinear static response calculations, in addition to dynamic response calculations.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Dyn., 1984; p 251-268
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 6
    facet.materialart.
    Unknown
    Initial postbuckling analysis of elastoplastic thin-shear structures (1984)
    In:  CASI
    Details
    Publication Date: 2005-03-28
    Description: The design of thin shell structures with respect to elastoplastic buckling requires an extended analysis of the influence of initial imperfections. For conservative design, the most critical defect should be assumed with the maximum allowable magnitude. This defect is closely related to the initial postbuckling behavior. An algorithm is given for the quasi-static analysis of the postbuckling behavior of structures that exhibit multiple buckling points. the algorithm based upon an energy criterion allows the computation of the critical perturbation which will be employed for the definition of the critical defect. For computational efficiency, the algorithm uses the reduced basis technique with automatic update of the modal basis. The method is applied to the axisymmetric buckling of cylindrical shells under axial compression, and conclusions are given for future research.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Dyn., 1984; p 237-250
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 7
    facet.materialart.
    Unknown
    Fracture, failure, and fragmentation (1984)
    In:  CASI
    Details
    Publication Date: 2005-03-28
    Description: A general approach is required for describing matter of behavior when the failure is likely to involve growth and coalescence of a large number of fractures. Failures of this kind appear frequently in rapid dynamic processes, particularly in the formation of spall fragments. An approach to formulating constitutive relations that accounts for the opening, shear and growth of an ensemble of cracks is discussed. The approach accounts for plastic flow accompanying fragmentation. The resulting constitutive relations were incorporated into a Lagrangian computer program. A theoretical approach to coalescence is described. The simplest formulation uses a linear Liouville equation, with crack growth limited by the mean free path of cracks, assumed constant. This approach allows for an anisotropic distribution of cracks. An alternative approach in which the decrease of the mean free path with increasing crack size is accounted for, but the crack distribution is assumed isotropic is described. A reduction of the governing Liouville equation to an ordinary differential equation of third order is possible, and the result can be used to determine how mean free path decreases with increasing crack size.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Dyn., 1984; p 185-195
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 8
    facet.materialart.
    Unknown
    Composite laminate optimization program suitable for microcomputers (1984)
    In:  CASI
    Details
    Publication Date: 2005-03-28
    Description: The design of a composite panel requires some way of finding the minimum thickness laminate which will withstand the load requirements without failure. The mathematical complexity of this problem dictates the use of nonlinear optimization techniques. Specialized laminate optimization programs were developed which are compact and efficient enough to run on microcomputers. Only stresses at a point and inplane loads and deflections are considered. The programs are simple to use and require no knowledge of optimization. Techniques are developed which find minimum thickness laminates with either ply ratios or ply angles as design variables. A method is presented for finding the optimum orientation for the axis of symmetry of an orthotropic laminate. The orthotropic laminate program uses an approximate failure theory, which speed up computations dramatically.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Dyn., 1984; p 181-183
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 9
    facet.materialart.
    Unknown
    Sensitivity analysis of limit state functions for probability-based plastic design (1984)
    In:  CASI
    Details
    Publication Date: 2005-03-28
    Description: The evaluation of the total probability of a plastic collapse failure P sub f for a highly redundant structure of random interdependent plastic moments acted on by random interdepedent loads is a difficult and computationally very costly process. The evaluation of reasonable bounds to this probability requires the use of second moment algebra which involves man statistical parameters. A computer program which selects the best strategy for minimizing the interval between upper and lower bounds of P sub f is now in its final stage of development. The relative importance of various uncertainties involved in the computational process on the resulting bounds of P sub f, sensitivity is analyzed. Response sensitivities for both mode and system reliability of an ideal plastic portal frame are shown.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Dyn., 1984; p 159-179
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 10
    facet.materialart.
    Unknown
    A triangular finite element for thin plates and shells (1984)
    In:  CASI
    Details
    Publication Date: 2005-03-28
    Description: A finite element modeling technique which utilizes a triangular element called TSHEL with 45 degrees of freedom and seven point integration was tested for analysis of thin plate and shell structures. The element formulation is based on the degenerate solid shell concept and the mixed formulation with assumed independent inplane and transverse shear strains. The effectiveness of the present modeling technique which features combined use of elements with kinematic modes and those without kinematic modes to eliminate both locking and spurious kinematic modes at the global structural levels are shown.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Dyn., 1984; p 123-142
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 11
    facet.materialart.
    Unknown
    Stress-derivative control of keystoning deformation in finite element codes (1984)
    In:  CASI
    Details
    Publication Date: 2005-03-28
    Description: The stress derivative technique for control of keystoning deformation in under-integrated finte elements is based on expansion of the stress in a Taylor series about the element center and retention of additional terms beyond the constant stress term. It has the advantage over other control techniques that keystoning resistance is provided by actual rather than artificial material properties. Application of this technique to the quadrilateral ring elements used for modelling solids of revolution subjected to axisymmetric loads is described. In a cylindrical coordinate system additional terms appear in the formulation which must be dealt with in arriving at a workable keystoning control scheme.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Dyn., 1984; p 111-122
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 12
    facet.materialart.
    Unknown
    Initial experience with distributing structural calculations among computers operating in parallel (1984)
    In:  CASI
    Details
    Publication Date: 2005-03-28
    Description: An existing program is currently being adapted to perform finite element analysis by distributing substructures over a network of four Apple IIe microcomputers connected to a shared disk. In this network, one microcomputer controls the entire process while the others perform the analysis on each substructure in parallel. This substructure analysis is used in an iterative, fully stressed, structural resizing procedure. This procedure allows experimentatation with resizing in which all analyses are not completed during a single iteration. This research gives some insight on how to configure multidiscriplinary analysis and optimization procedures for decomposable engineering systems using either high performance engineering workstations or a parallel processor supercomputer. In addition, the operational experience gained facilitates the implementation of analysis programs on these new computers when they become available in an engineering environment.
    Keywords: STRUCTURAL MECHANICS
    Type: Res. in Struct. and Dyn., 1984; p 45-54
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 13
    facet.materialart.
    Unknown
    Application of concurrent processing to structural dynamic response computations (1984)
    In:  CASI
    Details
    Publication Date: 2005-03-28
    Description: Described are the experiences gained from solving for the dynamic response of two simple structures on an experimental Multiple Instruction Multiple Data (MIMD) computer called the finite element machine. Introduced are MIMD computing concepts, describing how the concurrent algorithmic techniques implemented and giving results for the two example problems. The results show computational speedups of up to 7.83 using eight of the finite element machine processors and indicate that significant computational speedups are possible for large order structural computations.
    Keywords: STRUCTURAL MECHANICS
    Type: Res. in Struct. and Dyn., 1984; p 31-44
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 14
    facet.materialart.
    Unknown
    The FLEX/32 multicomputing environment (1984)
    In:  CASI
    Details
    Publication Date: 2005-03-28
    Description: The FLEX/32 Multicomputer is a generic environment for cooperating multiple processors. The FLEX/32 supports a number of different processors, making it heterogeneous in terms of the instruction sets it supports, and homogeneous in its ability to provide consistent storage and input/output facilities to its differing processors. These facilities are accessed through standard 32-bit VMEbus connections. The FLEX/32 supports the full UNIX System V Operating System and languages associated with it, plus the extended ConCurrent C and Concurrent FORTRAN 77 languages that allow programming of concurrent software at a high level. Direct programming support at all levels is provided by the environment hardware for concurrent software execution and optimization, including hardware support for shared resource access arbitration, conditional critical region arbitration, and interprocessor messages.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Dyn., 1984; p 1-14
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 15
    facet.materialart.
    Unknown
    Finite element computation on nearest neighbor connected machines (1984)
    In:  CASI
    Details
    Publication Date: 2005-03-28
    Description: Research aimed at faster, more cost effective parallel machines and algorithms for improving designer productivity with finite element computations is discussed. A set of 8 boards, containing 4 nearest neighbor connected arrays of commercially available floating point chips and substantial memory, are inserted into a commercially available machine. One-tenth Mflop (64 bit operation) processors provide an 89% efficiency when solving the equations arising in a finite element problem for a single variable regular grid of size 40 by 40 by 40. This is approximately 15 to 20 times faster than a much more expensive machine such as a VAX 11/780 used in double precision. The efficiency falls off as faster or more processors are envisaged because communication times become dominant. A novel successive overrelaxation algorithm which uses cyclic reduction in order to permit data transfer and computation to overlap in time is proposed.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Res. in Struct. and Dyn., 1984; p 15-29
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 16
    facet.materialart.
    Unknown
    An investigation of possible electrical hazards of carbon fiber composites (1980)
    In:  CASI
    Details
    Publication Date: 2006-06-26
    Description: Results of an assessment of the public risk associated with the release of carbon fibers from crash-fire accidents of civil aircraft having carbon composite structures are presented. The overall national impact is shown to be extremely low in 1993. Personal injury is found to be extremely unlikely. Based on these findings, the risk of electrical failure from carbon fibers should not prevent the exploitation of composites in aircraft, and additional protection of aircraft avionics to guard aginst carbon fibers is unnecessary.
    Keywords: COMPOSITE MATERIALS
    Type: Selected NASA Res. in Composite Mater. and Struct.; p 183-234
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 17
    facet.materialart.
    Unknown
    Development of a laminate fatigue analysis (1980)
    In:  CASI
    Details
    Publication Date: 2006-06-26
    Description: A fatigue analysis technique developed to predict damage growth in notched laminates is described. Features of the analysis include: criteria to relate matrix failure to cyclic stresses in and between plies; correlation of delamination growth with strain-release rate; and in-plane shear modulus change is related to cyclic shear stresses. A simplified finite element model is used to determine stresses in laminates that contain matrix damage. Failure criteria are integrated with the finite element model to form the fatigue analysis.
    Keywords: COMPOSITE MATERIALS
    Type: Selected NASA Res. in Composite Mater. and Struct.; p 79-106
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 18
    facet.materialart.
    Unknown
    Damage tolerance research on composite compression panels (1980)
    In:  CASI
    Details
    Publication Date: 2006-06-26
    Description: The damage tolerance of composites was investigated. Results show that severe degradation in material strength may occur due to impact damage and that reduced strain allowables should be considered to compensate for possible impact damage. The mechanisms of failure involved in impact so that local damage will be reduced and arrest of propagating fracture initiated at impact locations are examined. Compression strength reductions for damage due to impact by a 1.27 cm diameter spherical projectile in thick laminates representative of wing skin panels are presented. Also discussed are the results of concepts recently evaluated to improve damage tolerance. These concepts range from improvements at the materials level to advanced structural configurations designed to arrest or limit the growth of propagating fractures. The results indicate that substantial improvements in the damage tolerance of graphite-epoxy composite structures can be achieved through the proper combination of materials and structural design.
    Keywords: COMPOSITE MATERIALS
    Type: Selected NASA Res. in Composite Mater. and Struct.; p 107-142
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 19
    facet.materialart.
    Unknown
    Buckling and postbuckling research on flat and curved composite panels (1980)
    In:  CASI
    Details
    Publication Date: 2006-06-26
    Description: Progress in the development of verified design technology for generic advanced-composite structural components loaded in compression is reported. Generic structural configurations material systems and load ranges of interest for a given application were investigated using structural procedures, structural analysis procedures, and laboratory testing of structural specimens. Both flat and curved composite compression panels that are designed either to be buckling resistant or to have postbuckling strength depending on the expected application of the panels were considered.
    Keywords: COMPOSITE MATERIALS
    Type: Selected NASA Res. in Composite Mater. and Struct.; p 35-78
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 20
    facet.materialart.
    Unknown
    Failure prediction techniques for compression loaded composite laminates with holes (1980)
    In:  CASI
    Details
    Publication Date: 2006-06-26
    Description: The degree of notch sensitivity of composites in compression and whether their failures can be predicted over a wide range of plate and hole sizes. The notch sensitivity of composites is investigated by comparing actual failure loads of laminates with circular holes, with the extreme failure that would be expected from an ideal notch insensitive material and from an ideal notch sensitive material. The predictability question is addressed by applying the point stress failure criterion to a wide range of plate widths and hole sizes and comparing with available experimental data. The severity of impact is explored by comparing strength reductions resulting from impact with those resulting from comparable size circular holes. Finally, comparison is made of the differences to be expected from the effects of cracks and circular holes on failure strength.
    Keywords: COMPOSITE MATERIALS
    Type: Selected NASA Res. in Composite Mater. and Struct.; p 1-33
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 21
    facet.materialart.
    Unknown
    Vibration isolation system for testing in a vacuum (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The design, manufacture, and testing of an isolation system placed under a bench which simulates a space platform during testing in a hard vacuum are described. A low natural frequency isolation system is used to decouple ground vibrations from the bench. The materials used are vacuum compatible and do not introduce unwanted matter which would contaminate the payload optics and/or the testing environment. The system accommodates payloads of varying weights and envelopes.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Goddard Space Flight Center 13th Space Simulation Conf.; p 320-339
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 22
    facet.materialart.
    Unknown
    The NASA welding assessment program (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The potential cost and performance advantages of welding was understood but ignored by solar panel manufacturers in the U.S. Although NASA, DOD and COMSAT have supported welding development efforts, soldering remains the only U.S. space qualified method for interconnecting solar cells. The reason is that no U.S. satellite prime contractor found it necessary, due to mission requirements, to abandon the space proven soldering process. It appears that the proposed NASA space station program will provide an array requirement, a 10 year operation in a low Earth orbital environment, that mandates welding. The status of welding technology in the U.S. is assessed.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Lewis Research Center Space Photovoltaic Res. and Technol. 1983; p 220-222
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 23
    facet.materialart.
    Unknown
    Space shuttle solid rocket booster water entry cavity collapse loads (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Solid rocket booster cavity collapse flight measurements included external pressures on the motor case and aft skirt, internal motor case pressures, accelerometers located in the forward skirt, mid-body area, and aft skirt, as well as strain gages located on the skin of the motor case. This flight data yielded applied pressure longitudinal and circumferential distributions which compare well with model test predictions. The internal motor case ullage pressure, which is below atmospheric due to the rapid cooling of the hot internal gas, was more severe (lower) than anticipated due to the ullage gas being hotter than predicted. The structural dynamic response characteristics were as expected. Structural ring and wall damage are detailed and are considered to be attributable to the direct application of cavity collapse pressure combined with the structurally destabilizing, low internal motor case pressure.
    Keywords: STRUCTURAL MECHANICS
    Type: Shock and Vibration Inform. Center The Shock and Vibration Bull., No. 52. Part 2; p 21-26
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 24
    facet.materialart.
    Unknown
    Research on ultra-high-temperature materials, monolithic ceramics, ceramic matrix composites and carbon/carbon composites (1982)
    In:  CASI
    Details
    Publication Date: 2006-04-12
    Description: Research on three classes of materials that show potential for allowing significant increases in operating temperatures in gas turbine engines is discussed. Monolithic ceramics, ceramic matrix composites, and carbon-carbon composites are discussed. Sintering, hot pressing, and densification are discussed.
    Keywords: COMPOSITE MATERIALS
    Type: NASA. Langley Research Center Advan. Mater. Technol.; p 275-292
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 25
    facet.materialart.
    Unknown
    Processing composite materials (1982)
    In:  CASI
    Details
    Publication Date: 2006-04-12
    Description: The fabrication of several composite structural articles including DC-10 upper aft rudders, L-1011 vertical fins and composite biomedical appliances are discussed. Innovative composite processing methods are included.
    Keywords: COMPOSITE MATERIALS
    Type: Advan. Mater. Technol.; p 115-140
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 26
    facet.materialart.
    Unknown
    Opportunities for composites in commercial transport structures (1982)
    In:  CASI
    Details
    Publication Date: 2006-04-12
    Description: Manufacturers are developing composite versions of structural components on existing aircraft. Development involves testing of various material options before selecting one and then extensive testing to develop an adequate data base of material strength and stiffness properties. Design options are narrowed through analysis and a varied spectrum of development tests on small and large subcomponents. In parallel with this, a suitable production process including economical ply preparation and cure at high temperature and pressure is evolved, tools are designed and fabricated, and full scale components are then manufactured for ground qualification tests, flight tests, and airline service. The various tests include many that are required by the FAA for flight certification, which must precede airline service. Inspection and repair methods to insure adequate maintenance in service are also developed.
    Keywords: COMPOSITE MATERIALS
    Type: Advan. Mater. Technol.; p 1-28
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 27
    facet.materialart.
    Unknown
    Fatigue and fracture research in composite materials (1982)
    In:  CASI
    Details
    Publication Date: 2006-04-12
    Description: The fatigue, fracture, and impact behavior of composite materials are investigated. Bolted and bonded joints are included. The solutions developed are generic in scope and are useful for a wide variety of structural applications. The analytical tools developed are used to demonstrate the damage tolerance, impact resistance, and useful fatigue life of structural composite components. Standard tests for screening improvements in materials and constituents are developed.
    Keywords: COMPOSITE MATERIALS
    Type: Advan. Mater. Technol.; p 91-114
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 28
    facet.materialart.
    Unknown
    A conceptual basis for the design of damage-tolerant structural systems (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Researchers define damage-tolerant structural systems as those systems which not only have adeqate intact strength to withstand initial failure but also adequate residual strength to minimize the possibility of, and hence the consequences of, further failure. The incorporation of damage tolerance cannot be done in total isolation of the function being required of the system and the costs associated with obtaining improved damage tolerance. The approach, therefore, is to formulate multiple-objective, multi-level decision support problems (DSP), the solutions of which represent a compromise between higher costs and higher damage tolerance. Mulitple-objective decision support problems are easily solved in the linear domain. These formulations, however, include both linear and nonlinear constraints and goals, which in the past, have not been considered due to the resulting complexity. Here, researchers: (1) present a complete discussion and description of decision support problems; (2) identify what further research needs to be done in order to obtain information that is required but not known for solving problems using these models; and (3) identify what needs to be done to implement this prototype method in practice.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Recent Experiences in Multidisciplinary Analysis and Optimization, Part 2; 36 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 29
    facet.materialart.
    Unknown
    Structural optimization of large ocean-going structures (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Ocean-going vehicles and platforms are among the largest structures in the world and are subjected to relatively harsh conditions of motions and loads. Some of them, such as semi-submersible platforms, are a relatively new type of structure and hence there is no formal, well evolved and established structural design code as there is for more traditional structures. More recently, efforts have also been made to develop a design method of this type for ships and other ocean structures. One of the many advantages of a rationally based design method is versatility; it can be used for structures that have widely differing purposes, measures of merit, shapes and sizes. The purpose is to describe a rationally based design method that has been developed within the field of ocean structures, in order that persons dealing with other types of structure can judge whether and to what extent its various features may be useful for those other types. Also, even though some features may not be applicable they might stimulate some useful ideas.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Recent Experiences in Multidisciplinary Analysis and Optimization, Part 2; 18 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 30
    facet.materialart.
    Unknown
    A study of component design loads due to dynamic environment (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The random vibration of the components of the space shuttle causing internal cargo bay acoustic impingement on the payload was investigated. The import factors to be considered in the design of acoustically loaded structures are the prediction of acoustic environment, prediction of structural response to this environment, and to determine the effect of the response on the structural strength requirements. Two basic responses were analyzed. The primary structure response due to random vibration is first analyzed. The output of primary structure response is used as an input to the secondary structure to calculate the component response.
    Keywords: STRUCTURAL MECHANICS
    Type: Alabama Univ. in Huntsville The 1981 NASA(ASEE Summer Fac. Fellowship Program; 12 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 31
    facet.materialart.
    Unknown
    Surface contour of a biaxially strained, doubly curved antenna reflective mesh (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The elastic membrane equations which describe the deflection of a biaxially tensioned reflective mesh from an idealized surface were developed and solved. The conditions of equilibrium of the forces acting on a membrane element furnish equations which may be used to solve a variety of problems. Configurations considered include continuous, as well as incremental mesh attachment to structural members to form shapes which are approximately parabolic or spherical.
    Keywords: STRUCTURAL MECHANICS
    Type: Alabama Univ. in Huntsville The 1981 NASA(ASEE summer Fac. Fellowship Program; 11 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 32
    facet.materialart.
    Unknown
    Microcomputer design and analysis of the cable catenary large space antenna system (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The use of microcomputers in the design of a cable catenary large space antenna system is discussed. The development of a system design capability, data base utilization, systems integration, program structure and logic, and integrated graphics output are discussed.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Recent Experiences in Multidisciplinary Analysis and Optimization, Part 2; 14 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 33
    facet.materialart.
    Unknown
    Structural optimization with constraints on transients response (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: An exceptionally elegant method for structural optimization with constraints on the static response presented by Shield and Prager is discussed. Their derivation of the optimality condition was facilitated by a reformulation of the structural elasticity equations in terms of what was then a new variational principle, the principle of stationary mutual potential energy. Their optimality condition relates the design variable to an appropriately defined mutual strain energy. An alternative but related approach, based upon the principle of stationary mutual complementary energy, presented by N. C. Haung, is also discussed. The simplicity of these principles lies in the facts that the energy functionals are stationary at the solution to the field equations and that their stationary value is proportional to the quantity to be optimized.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Recent Experiences in Multidisciplinary Analysis and Optimization, Part 2; 11 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 34
    facet.materialart.
    Unknown
    The effects of the space environment on damping materials and damping designs on flexible structures (1984)
    In:  CASI
    Details
    Publication Date: 2006-04-03
    Description: The effects of space environments on damping materials and damping designs on flexible structures were investigated. The following items were examined: damping of flexible spacecraft appendages; composite loss factor (n sub s) vs. time in high vacuum for damped test beams and damping of flexible structures. The STEP experiments show inherent damping of flexible structures in space effective possible damping design configurations for space structures, effects of passively damped components on the system loss factor of flexible structures and the effect of space environment on properties of damping materials.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center STEP Expt. Requirements; p 79-102
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 35
    facet.materialart.
    Unknown
    Study of meteoroid impact craters on various materials (A0138-1) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Interplanetary dust particles (micrometeoroids) are expected to form well-defined craters upon impacting exposed material in space. Studying the frequency and features of these craters will provide data on the mass-flux distribution of micrometeoroids and, to a lesser extent, on the velocity magnitude and direction. This experiment will study impact craters produced by micrometeoroids on selected materials (metals and glasses in the form of thick targets) to obtain valuable technological and scientific data. Specifically, the studies will focus on determining micrometeoroid composition and mass-flux distribution. Analyses will also be made on the distribution of impact velocity vectors.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 121-123
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 36
    facet.materialart.
    Unknown
    The effect of space environment exposure on the properties of polymer matrix composite materials (A0180) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The objective of this experiment is to determine the effect of various lengths of exposure to a space environment on the mechanical properties of selected commercial polymer matrix composite materials. Fiber materials will include graphite, boron, S-glass, and PRD-49. The mechanical properties to be investigated are orthotropic elastic constants, strength parameters (satisfying the tensor polynomial relation), coefficients of thermal expansion, impact resistance, crack propagation, and fracture toughness. In addition, the effect of laminate thickness on property changes will also be investigated.
    Keywords: COMPOSITE MATERIALS
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 41-43
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 37
    facet.materialart.
    Unknown
    The effect of the space environment on composite materials (A0138-9) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The objective is to test different types of materials (laminates, thermal coatings, and adhesives) to determine their actual useful lifetime. These experiments will also make is possible to integrate the histories of the thermal and mechanical characteristics into models of the composite structures. The experiment is passive and is located in one of the boxes in a 12-in.-deep peripheral tray with nine other experiments from France. The box will provide protection for the samples from contamination during the launch and reentry phases of the Long Duration Exposure Facility mission. The experiment revolves around four themes of study: thermal coatings, adhesives, dimensional stability, and mechanical characteristics. The various materials will be arranged in six levels within the box, so only the first level will be subjected to direct solar radiation. Each level will consist of plates from which test specimens will be cut after the mission.
    Keywords: COMPOSITE MATERIALS
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 32-34
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 38
    facet.materialart.
    Unknown
    Space environment effects on spacecraft materials (M0003) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The immediate objectives of this experiment are to understand changes in the properties and structure of materials after exposure to the space environment and to compare these changes with predictions based on laboratory experiments. The experiment consists of 19 subexperiments involving a number of DOD laboratories and contractor organizations. In general, the experimental approach with each of the subexperiments will involve comparison of preflight and postflight analyses. Typical analyses will include the measurement of optical properties (reflectance, transmittance, and refractive index), and macrophysical properties. In addition to measuring changes in the macroscopic properties of the returned specimens, microstructural properties will also be examined. Thus, it may be possible to increase our understanding of the changes induced by the environment. This increased understanding can then be used to predict the performance of materials based on knowledge of the space environment and the results of laboratory tests. This experiment will be a coopperative effort and will provide an opportunity for DOD space programs and laboratories to evaluate materials and components after long exposures to the space environment.
    Keywords: COMPOSITE MATERIALS
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 44-48
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 39
    facet.materialart.
    Unknown
    Evaluation of long-duration exposure to the natural space environment on graphite-polyimide and graphite-epoxy mechanical properties (A0175) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The primary objective of this experiment is to accumulate the needed operational data associated with the exposure of graphite-polyimide and graphite-epoxy material to the environments of space. The experiment will be mounted in two 3-in.-deep peripheral trays. Graphite-polyimide specimens will occupy 1 1/3 trays and the graphite-epoxy specimens will occupy two-thirds of a tray. The experiment approach requires two matched sets of specimens with traceable records that are maintained for materials processing and specimen quality. After fabrication, one set of each test specimen will be sectioned and structurally tested to serve as a data baseline. After the flight, the other set of specimens will undergo extensive measurements of mechanical properties for comparison with the original data baseline. Structural testing of the graphite-polyimide specimens will provide strength and elastic data in tension, compression, and shear. Transverse tension microcracking and crack propagation will be evaluated by photomicroscopy. Structural testing of the graphite-epoxy specimens will include verification of laminate, core, adhesive, and fatigue properties as applied to the design and analysis of the payload bay door. Microcracking and crack propagation will also be analyzed by photomicroscopy.
    Keywords: COMPOSITE MATERIALS
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 38-40
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 40
    facet.materialart.
    Unknown
    Effect of space exposure of some epoxy matrix composites on their thermal expansion and mechanical properties (A0138-8) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: This experiment has three objectives. The first and main objective is to detect a possible variation in the coefficient of thermal expansion of composite samples during a 1-year exposure to the near-Earth orbital environment. A second objective is to detect a possible change in the mechanical integrity of composite products, both simple elements and honeycomb sandwich assemblies. A third objective is to compare the behavior of two epoxy resins commonly used in space structural production. The experimental approach is to passively expose samples of epoxy matrix composite materials to the space environment and to compare preflight and postflight measurements of mechanical properties. The experiment will be located in one of the three FRECOPA (French cooperative payload) boxes in a 12-in.-deep peripheral tray that contains nine other experiments from France. The FRECOPA box will protect the samples from contamination during the launch and reentry phases of the mission. The coefficients of thermal expansion are measured on Earth before and after space exposure.
    Keywords: COMPOSITE MATERIALS
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 27-31
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 41
    facet.materialart.
    Unknown
    Space exposure of composite materials for large space structures (A0134) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The objective of this experiment is to evaluate the effects of the near-Earth orbital environment on the physical and chemical properties of laminated continuous-filament composites and composites resin films for use in large space structures and advanced spacecraft. The experiment is passive and occupies about one-half of a 6-in.-deep peripheral tray. Specimens of composite materials and polymeric and resin films are arranged above and below the experiment mounting plate to enable both exposure and nonexposure to sunlight. This provides a comparison of the effects of ultraviolet plus vacuum plus thermal cycling and those of vacuum plus thermal cycling on these materials. The experiment tray is thermally isolated from the Long Duration Exposure Facility structure to allow the material specimens to experience a wide range of thermal cycles. Tensile and compression specimens will be used to evaluate the laminated composite materials. A number of the specimens are precut and ready for testing after space exposure, whereas other specimens will be prepared from larger samples.
    Keywords: COMPOSITE MATERIALS
    Type: Long Duration Exposure Facility (LDEF); p 24-26
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 42
    facet.materialart.
    Unknown
    Influence of extended exposure in space on mechanical properties of high-toughness graphite-epoxy composite material (A0019) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Graphite-epoxy composites are promising candidates for structural use in space vehicles because of their high strength and elastic modulus properties. The problem of low fracture toughness was solved by use of recently developed techniques of intermittent interlaminar bonding. Before this material can be adapted for space use, however, confidence must be gained that its mechanical properties are not degraded by exposure to the space environment. The objective of this experiment is to test the effect of extended exposure to a space environment on the mechanical properties of a specially toughened T300/5208 graphite-epoxy composite material. Specimens made by recently developed techniques of intermittent interlaminar bonding will be exposed and afterward tested for fracture toughness, tensile strength, and elastic modulus. The approach of this experiment is to provide a frame on which the specimens can be mounted with their flat sides normal to the Long Duration Exposure Facility radius, each specimen with an unobstructed exposure of about 2 pi sr. The specimens will be mounted so that they neither fracture from high stress nor fail from excessive heating during launch and return.
    Keywords: COMPOSITE MATERIALS
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 19-20
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 43
    facet.materialart.
    Unknown
    Durability of aircraft composite materials (1982)
    In:  CASI
    Details
    Publication Date: 2006-04-12
    Description: Confidence in the long term durability of advanced composites is developed through a series of flight service programs. Service experience is obtained by installing secondary and primary composite components on commercial and military transport aircraft and helicopters. Included are spoilers, rudders, elevators, ailerons, fairings and wing boxes on transport aircraft and doors, fairings, tail rotors, vertical fins, and horizontal stabilizers on helicopters. Materials included in the evaluation are boron/epoxy, Kevlar/epoxy, graphite/epoxy and boron/aluminum. Inspection, maintenance, and repair results for the components in service are reported. The effects of long term exposure to laboratory, flight, and outdoor environmental conditions are reported for various composite materials. Included are effects of moisture absorption, ultraviolet radiation, and aircraft fuels and fluids.
    Keywords: COMPOSITE MATERIALS
    Type: Advan. Mater. Technol.; p 335-356
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 44
    facet.materialart.
    Unknown
    Recent advances in carbon-carbon materials systems (1982)
    In:  CASI
    Details
    Publication Date: 2006-04-12
    Description: Carbon-carbon materials and new oxidation resistant coating developments are discussed. Potential areas of application are highlighted. A short bibliography of selected references is included that describe carbon-carbon materials and related technology in detail.
    Keywords: COMPOSITE MATERIALS
    Type: Advan. Mater. Technol.; p 293-312
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 45
    facet.materialart.
    Unknown
    An investigation into the probabilistic combination of quasi-static and random accelerations (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: STRUCTURAL MECHANICS
    Type: JPL, Proceedings of the Shuttle Payload Dynamic Environments and Loads Prediction Workshop, Volume 2; p 527-541
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 46
    facet.materialart.
    Unknown
    Fire-resistant material (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: COMPOSITE MATERIALS
    Type: NASA Technol. Appl. Team; p 38
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 47
    facet.materialart.
    Unknown
    Constitutive relationships for anisotropic high-temperature alloys (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: A constitutive theory is presented for representing the anisotropic viscoplastic behavior of high-temperature alloys that possess directional properties resulting from controlled grain growth or solidification. The theory is an extension of a viscoplastic model that has been applied in structural analyses involving isotropic metals. Anisotropy is introduced through the definition of a vector field that identifies a preferential (solidification) direction at each material point. Following the development of a full multiaxial theory, application is made to homogeneously stressed elements in pure shear and to a uniaxially stressed rectangular block in plane stress with the stress direction oriented at an arbitrary angle with the material direction. It is shown that an additional material parameter introduced to characterize the degree of anisotropy can be determined on the basis of simple creep tests.
    Keywords: STRUCTURAL MECHANICS
    Type: Nuclear Engineering and Design (ISSN 0029-5493); 83; 389-396
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 48
    facet.materialart.
    Unknown
    Simplified composite micromechanics equations of hygral, thermal, and mechanical properties (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A unified set of composite micromechanics equations of simple form is summarized and described. This unified set can be used to predict unidirectional composite (ply) geometric, mechanical, thermal and hygral properties using constituent material (fiber/matrix) properties. This unified set also includes approximate equations for predicting (1) moisture absorption; (2) glass transition temperature of wet resins; and (3) hygrothermal degradation effects. Several numerical examples are worked-out to illustrate ease of use and versatility of these equations. These numerical examples also demonstrate the interrelationship of the various factors (geometric to environmental) and help provide insight into composite behavior at the micromechanistic level.
    Keywords: COMPOSITE MATERIALS
    Type: SAMPE Quarterly (ISSN 0036-0821); 15; 14-23
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 49
    facet.materialart.
    Unknown
    Off-axis tensile properties and fracture in a unidirectional graphite/polyimide composite (Celion 6000/PMR 15) (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Tensile properties of unidirectional Celion 6000 graphite/PMR 15 polyimide composites prepared by hot molding and cold molding processes were measured at room temperature and 316 C, the upper use temperature of the polyimide resin, at both 45 and 90 deg to the fiber axis. The resulting fractures were characterized by scanning electron microscopy and materialographic techniques. Variation in tensile properties with processing history occurred in the elastic modulus and strain to failure for specimens loaded at 90 deg at 316 C, and in the fracture stress, and hence the in-plane shear stress, for those loaded at 45 deg at room temperature. Significant plastic deformation was observed in the 45 deg orientation at 316 C for material produced by both processing methods. In general, fracture occurred by both failure within the matrix and at the fiber-matrix interface; the degree of interfacial failure increased with temperature. Secondary cracking below the primary fracture surface was also observed.
    Keywords: COMPOSITE MATERIALS
    Type: Polymer Composites (ISSN 0272-8397); 5; 179-185
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 50
    facet.materialart.
    Unknown
    Geometrically nonlinear analysis of adhesively bonded joints (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A geometrically nonlinear finite element analysis of cohesive failure in typical joints is presented. Cracked-lap-shear joints were chosen for analysis. Results obtained from linear and nonlinear analysis show that nonlinear effects, due to large rotations, significantly affect the calculated mode 1, crack opening, and mode 2, inplane shear, strain-energy-release rates. The ratio of the mode 1 to mode 2 strain-energy-release rates (G1/G2) was found to be strongly affected by the adhesive modulus and the adherend thickness. The ratios between 0.2 and 0.8 can be obtained by varying adherend thickness and using either a single or double cracked-lap-shear specimen configuration. Debond growth rate data, together with the analysis, indicate that mode 1 strain-energy-release rate governs debond growth. Results from the present analysis agree well with experimentally measured joint opening displacements. Previously announced in STAR as N83-13497
    Keywords: STRUCTURAL MECHANICS
    Type: ASME, Transactions, Journal of Engineering Materials and Technology (ISSN 0094-4289); 106; 59-65
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 51
    facet.materialart.
    Unknown
    Metallurgical and tensile property analysis of several silicon carbide/titanium composite systems (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Several silicon-carbide fiber reinforced titanium matrix composite systems were investigated to determine composite degradation mechanisms and to develop techniques to minimize loss of mechanical properties during fabrication and in service. Emphasis was on interface control by fiber or matrix coatings. Fibers and matrix materials were sputter coated with various metals to determine the effects of the coatings on basic fiber properties, fiber-matrix interactions, and on composite properties. The effects of limited variations in fabrication temperature on composite properties were determined for composites consolidated by standard press-diffusion-bonding techniques.
    Keywords: COMPOSITE MATERIALS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 52
    facet.materialart.
    Unknown
    Effect of resin on impact damage tolerance of graphite/epoxy laminates (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Twenty-four different epoxy resin systems were evaluated by a variety of test techniques to identify materials that exhibited improved impact damage tolerance in graphite/epoxy composite laminates. Forty-eight-ply composite panels of five of the material systems were able to sustain 100 m/s impact by a 1.27-cm-diameter aluminum projectile while statically loaded to strains of 0.005. Of the five materials with the highest tolerance to impact, two had elastomeric additives, two had thermoplastic additives, and one had a vinyl modifier; all the five systems used bisphenol A as the base resin. An evaluation of test results shows that the laminate damage tolerance is largely determined by the resin tensile properties, and that improvements in laminate damage tolerance are not necessarily made at the expense of room-temperature mechanical properties. The results also suggest that a resin volume fraction of 40 percent or greater may be required to permit the plastic flow between fibers necessary for improved damage tolerance.
    Keywords: COMPOSITE MATERIALS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 53
    facet.materialart.
    Unknown
    Durability/life of fiber composites in hygrothermomechanical environments (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Statistical analysis and multiple regression were used to determine and quantify the significant hygrothermomechanical variables which influence the tensile durability/life (cycle loading, fatigue) of boron-fiber/epoxy-matrix (B/E) and high-modulus-fiber/epoxy-matrix (HMS/E) composites. The use of the multiple regression analysis reduced the variables from fifteen, assumed initially, to six or less with a probability of greater than 0.999. The reduced variables were used to derive predictive models for compression and intralaminar shear durability/life of B/E and HMS/E composites assuming isoparametric fatigue behavior. The predictive models were subsequently generalized to predict the durability/life of graphite/fiber-r generalized model is of simple form, predicts conservative values compared with measured data and should be adequate for use in preliminary designs. Previously announced in STAR as N82-14287
    Keywords: COMPOSITE MATERIALS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 54
    facet.materialart.
    Unknown
    Strain rate characterization of unidirectional graphite/epoxy composite (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: For an investigation of problems of composites at high strain rates with dominant wave propagation effects, such as dynamically loaded composite jet engine blades, the longitudinal, transverse, and in-plane shear properties of unidirectional SP 288/AS graphite/epoxy were measured at various strain rates ranging from quasi-static to over 500/s. The test specimens were rings 10.16 cm in diameter, 2.54 cm long, 6 to 8 plies thick, and with fibers at 0, 90, and 10 deg off-axis. Quasi-static testing was conducted in a fixture which applies hydraulic pressure to the ring specimens, and dynamic testing was conducted by applying an internal pressure pulse through a liquid in a special fixture. Dynamic stress-strain curves are presented. For the 0-deg specimens, the modulus increases with strain up to 20 percent of the static value. The modulus and strength increase sharply in the 90-deg rings with strain rate reaching values two to three times the corresponding static rate.
    Keywords: COMPOSITE MATERIALS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 55
    facet.materialart.
    Unknown
    Buffer strips in composites at elevated temperature (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The composite material 'buffer strip' concept is presently investigated at elevated temperatures for the case of graphite/polyimide buffer strip panels using a (45/0/45/90)2S layup, where the buffer strip material was 0-deg S-glass/polyimide. Each panel was loaded in tension until it failed, and radiographs and crack opening displacements were recorded during the tests to determine fracture onset, fracture arrest, and the extent of damage in the buffer strip after crack arrest. At 177 + or - 3 C, the buffer strips increased the panel strength by at least 40 percent in comparison with panels without buffer strips. Compared to similar panels tested at room temperature, those tested at elevated temperature had lower residual strengths, but higher failure strains.
    Keywords: COMPOSITE MATERIALS
    Type: Journal of Composite Materials (ISSN 0021-9983); 17; 549-560
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 56
    facet.materialart.
    Unknown
    The input mobility of an infinite circular cylindrical elastic shell filled with fluid (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The force input mobility of an infinite elastic circular cylindrical shell filled with fluid is derived by using the spectral equations of motion. Mobilities are evaluated and their physical interpretations are discussed for a steel shell of thickness h/a = 0.05 filled with water and vibrating in the n = 0, 1 and 2 circumferential modes. The results are subsequently used to analyze the related situations of wave transmission through a radial ring constraint and the far field vibrational energy distributions between the contained fluid and the shell wall for line and point driving forces.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Sound and Vibration (ISSN 0022-460X); 87; 409-427
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 57
    facet.materialart.
    Unknown
    Processing of fused silicide coatings for carbon-based materials (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The processing and oxidation resistance of fused Al-Si and Ni-Si slurry coatings on ATJ graphite was studied. Ni-Si coatings in the 70 to 90 percent Si range were successfully processed to melt, wet, and bond to the graphite. The molten coatings also infiltrated the porosity in graphite and reacted with it to form SiC in the coating. Cyclic oxidation at 1200 C showed that these coatings were not totally protective because of local attack of the substrate, due to the extreme thinness of the coatings in combination with coating cracks. Previously announced in STAR as N83-27019
    Keywords: COMPOSITE MATERIALS
    Type: Ceramic Engineering and Science Proceedings (ISSN 0196-6219); 4; 757-783
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 58
    facet.materialart.
    Unknown
    Cyclic debonding of adhesively bonded composites (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: To analyze the fatigue behavior of a simple composite-to-composite bonded joint, a combined experimental and analytical study of the cracked-lap-shear specimen subjected to constant-amplitude cyclic loading was undertaken. Two bonded systems were studied: T300/5208 graphite/epoxy adherends bonded with adhesives EC 3445 and with FM-300. For each bonded system, two specimen geometries were tested: (1) a strap adherend of 16 plies bonded to a lap adherend of 8 plies, and (2) a strap adherend of 8 plies bonded to a lap adherend of 16 plies. In all specimens tested, the fatigue failure was in the form of cyclic debonding with some 0 deg fiber pull-off from the strap adherend. The debond always grew in the region of adhesive that had the highest mode I (peel) loading and that region was close to the adhesive-strap interface. Furthermore, the measured cyclic debond growth rates correlated well with total strain energy release rates G(T) as well as with its components G(I) (peel) and G(II) (shear) for the mixed-mode loading in the present study.
    Keywords: COMPOSITE MATERIALS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 59
    facet.materialart.
    Unknown
    PMR polyimide composites for aerospace applications (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: A novel class of addition-type polyimides has been developed in response to the need for high temperature polymers with improved processability. The new plastic materials are known as PMR (for in situ polymerization of monomer reactants) polyimides. The highly processable PMR polyimides have made it possible to realize much of the potential of high temperature resistant polymers. Monomer reactant combinations for several PMR polyimides have been identified. The present investigation is concerned with a review of the current status of PMR polyimides. Attention is given to details of PMR polyimide chemistry, the processing of composites and their properties, and aerospace applications of PMR-15 polyimide composites.
    Keywords: COMPOSITE MATERIALS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 60
    facet.materialart.
    Unknown
    An elastic-plastic finite element analysis of crack initiation, stable crack growth, and instability (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: Studies have been conducted to develop efficient techniques to simulate crack extension and to examine various local and global fracture criteria. Of the considered criteria, the crack-tip-opening angle (CTOA) or displacement (CTOD) at a specified distance from the crack tip was shown to be most suited for modeling stable crack growth and instability during the fracture process. The results obtained in a number of studies show the necessity for studying different crack configurations when assessing the validity of any fracture criteria. One of the objectives of the present investigation is related to a critical evaluation of the CTOD growth criterion using an elastic-plastic finite element analysis under monotonic loading to failure. The analysis was found to predict three stages of crack growth behavior under monotonic loading to failure. Calculated CTOD values agreed well with experimental values for crack growth initiation.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 61
    facet.materialart.
    Unknown
    Prediction of composite hygral behavior made simple (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A convenient procedure is described to determine the hygral behavior (moisture expansion coefficients and moisture stresses) of angleplied fiber composites using a pocket calculator. The procedure consists of equations and appropriate graphs for various (+ or - theta) ply combinations. These graphs present reduced stiffness and moisture expansion coefficients as functions of (+ or - theta) in order to simplify and expedite the use of the equations. The procedure is applicable to all types of balanced, symmetric fiber composites including interply and intraply hybrids. The versatility and generality of the procedure is illustrated using several step-by-step numerical examples. Previously announced in STAR as N82-16181
    Keywords: COMPOSITE MATERIALS
    Type: SAMPE Quarterly (ISSN 0036-0821); 14; 30-39
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 62
    facet.materialart.
    Unknown
    Thermal and mechanical properties of advanced, high temperature ceramic-composite insulation (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: It is found that the mechanical properties of fibrous refractory composite insulation (FRCI) can be improved if a higher calcination temperature is used before final processing. The results also reveal that a higher density FRCI containing 60 wt pct aluminoborosilicate fibers will exhibit minimal surface recession at 1480 C in a convective-heating environment. Another finding is that the material performance in the convective-heating environment is limited by the coating and the temperature capability of its emittance agent. A table is included giving the coating compositions used with the composite insulation and tested in the convectively heated environment at a surface temperature of 1480 C.
    Keywords: COMPOSITE MATERIALS
    Type: Ceramic Engineering and Science Proceedings (ISSN 0196-6219); 4; 551-563
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 63
    facet.materialart.
    Unknown
    Analysis of an internally radially cracked ring segment subject to three-point radial loading (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The boundary collocation method was used to generate Mode 1 stress intensity and crack mouth opening displacement coefficients for externally radially cracked ring segments subjected to three point radial loading. Numerical results were obtained for ring segment outer-to-inner radius ratios (R sub o/R sub i) ranging from 1.10 to 2.50 and crack length to segment width ratios (a/W) ranging from 0.1 to 0.8. Stress intensity and crack mouth displacement coefficients were found to depend on the ratios R sub o/R sub i and a/W as well as the included angle between the directions of the reaction forces. Previously announced in STAR as N83-35413
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Testing and Evaluation (ISSN 0090-3973); 11; 357-359
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 64
    facet.materialart.
    Unknown
    Environmental and high strain rate effects on composites for engine applications (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Previously cited in issue 13, p. 2034, Accession no. A82-30118
    Keywords: COMPOSITE MATERIALS
    Type: AIAA Journal (ISSN 0001-1452); 22; 128-134
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 65
    facet.materialart.
    Unknown
    Mechanical properties of a fiberglass prepreg system at cryogenic and other temperatures (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Previously cited in issue 13, p. 2024, Accession no. A82-30099
    Keywords: COMPOSITE MATERIALS
    Type: AIAA Journal (ISSN 0001-1452); 21; 1722-172
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 66
    facet.materialart.
    Unknown
    Extensional collapse modes of structural members (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Attenuation of the load transmitted to a vehicle occupant by the structure, either by modifying structural assembly, changing geometry of its elements, or adding specific load limiting devices to help dissipate kinetic energy was studied. General aviation aircraft have fuselage subfloors of a built up structure which are generally very stiff perpendicular to the floor of the cabin. The subfloor structure, designed to crush at an appropriate force level, can be used to advantage in a crash by dissipating energy through plastic buckling of the floor beams and frames. Simple closed form solutions to predict the mean crushing force levels of subfloor designs is useful in engineering practice. The crushing process of thin walled, plate formed, open structures with particular emphasis on L and cruciform shapes was analyzed. Lower and upper bound solutions for the mean crushing strength of cruciforms are obtained by considering modes of deformation which account for both bending and extensional deformation. It is the importance of extensional deformation to the energy absorption process, representing at least one third of the dissipated energy is shown. Previously announced in STAR as N82-33765
    Keywords: STRUCTURAL MECHANICS
    Type: Computers and Structures (ISSN 0045-7949); 18; 3, 19; 447-458
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 67
    facet.materialart.
    Unknown
    A survey of strength analysis methods for laminates with holes (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: The methods for predicting the strength of composite laminates with fastener holes are reviewed for the cases of unloaded as well as loaded holes. Three categories of methods are discussed: (1) the hole-boundary stress (HBS) methods which compare the peak stresses and the laminate strength; (2) the linear elastic fracture (LEFM) methods which assume cracks emanating from the hole and predict failure when the stress intensity factor for a crack equals the laminate fracture toughness; and (3) two different two-parameter (TP) methods: the average-stress (ASTP) method, which predicts failure when the average stress over a distance from the hole equals the laminate strength; and the point-stress (PSTP) Whitney-Nuismer (1974) approach, which predicts failure when the stress near the hole equals the material strength. The PSTP is relatively accurate and is by far the most widely used of all the prediction methods. However, for large ranges of variables and cases, the current strength predictions may not always be accurate.
    Keywords: STRUCTURAL MECHANICS
    Type: Aeronautical Society of India, Journal (ISSN 0001-9267); 36; 287-303
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 68
    facet.materialart.
    Unknown
    Structural optimization using optimality criteria methods (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: Optimality criteria methods take advantage of some concepts as those of statically determinate or indeterminate structures, and certain variational principles of structural dynamics, to develop efficient algorithms for the sizing of structures that are subjected to stiffness-related constraints. Some of the methods and iterative strategies developed over the last decade for calculations of the Lagrange multipliers in stressand displacement-limited problems, as well as for satisfying the appropriate optimality criterion, are discussed. The application of these methods are illustrated by solving problems with stress and displacement constraints.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 69
    facet.materialart.
    Unknown
    Current research on shear buckling and thermal loads with PASCO - Panel analysis and sizing code (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: The stiffened composite structural panel analysis and sizing code designated 'PASCO' encompasses both the generality required for the exploitation of composite materials' design flexibility and an accurate buckling analysis for the detection of complex buckling modes. PASCO can accordingly design for buckling, frequency, material strength, and panel stiffness requirements. Attention is given to an additional thermal loading design capability. Design studies illustrate the importance of the multiple load condition capability when thermal loads are present.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 70
    facet.materialart.
    Unknown
    Natural frequencies of twisted rotating plates (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: A detailed comparison is presented of the predicted eigenfrequencies of twisted rotating plates as obtained by using two different shape functions. Primarily, rotating twisted plates of two different aspect ratios and two different thickness ratios are considered. The effects of rotation are included by using a 'stress smoothing' technique when calculating the augmented stiffness matrix. In addition, the effects of Coriolis acceleration, contributions from membrane behavior, setting angle and sweep angle are considered. The effects of geometric nonlinearity are briefly discussed. Finally, results of a brief study of cambered plates are presented.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Sound and Vibration (ISSN 0022-460X); 97; 429-449
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 71
    facet.materialart.
    Unknown
    Strain-energy release rate analysis of cyclic delamination growth in compressively loaded laminates (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: Delamination growth in compressively loaded composite laminates was studied analytically and experimentally. The configuration used was a laminate with an across-the-width delamination. An approximate super-position stress analysis was developed to quantify the effects of various geometric, material, and load parameters on mode 1 and mode 2 strain energy release rates G sub 1 and G sub 2, respectively. Calculated values of G sub 1 and G sub 2 were then compared with measured cyclic delamination growth rates to determine the relative importance of G sub 1 and G sub 2. High growth rates were observed only when G sub 1 was large. However, slow growth was observed even when G sub 1 was negligibly small. This growth was apparently due to a large value of G sub 2.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 72
    facet.materialart.
    Unknown
    Interlaminar fracture of random short-fiber SMC composite (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: In the experimental phase of the present study of the interlaminar fracture behavior of a randomly oriented short fiber sheet molding compound (SMC) composite, the double cantilever beam fracture test is used to evaluate the mode I interlaminar fracture toughness of different composite thicknesses. In the analytical phase of this work, a geometrically nonlinear analysis is introduced in order to account for large deflections and nonlinear load deflection curves in the evaluation of interlaminar fracture toughness. For the SMC-R50 material studied, interlaminar toughness is an order of magnitude higher than that of unreinforced neat resin, due to unusual damage mechanisms ahead of the crack tip, together with significant fiber bridging across crack surfaces. Composite thickness effects on interlaminar fracture are noted to be appreciable, and a detailed discussion is given on the influence of SMC microstructure.
    Keywords: COMPOSITE MATERIALS
    Type: Journal of Composite Materials (ISSN 0021-9983); 18; 574-594
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 73
    facet.materialart.
    Unknown
    Phosphorus-containing imide resins - Modification by elastomers (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: The syntheses and general features of addition-type maleimide resins based on bis(m-aminophenyl)phosphine oxide and tris(m-aminophenyl)phosphine oxide have been reported previously. These resins have been used to fabricate graphite cloth laminates having excellent flame resistance. These composites did not burn even in pure oxygen. However, these resins were somewhat brittle. This paper reports the modification of these phosphorus-containing resins by an amine-terminated butadiene-acrylonitrile copolymer (ATBN) and a perfluoroalkylene diaromatic amine elastomer (3F). An approximately two-fold increase in short beam shear strength and flexural strength was observed at 7 percent ATBN concentration. The tensile, flexural, and shear strengths were reduced when 18 percent ATBN was used. Anaerobic char yields of the resins at 800 C and the limiting oxygen indexes of the laminates decreased with increasing ATBN concentration. The perfluorodiamine (3F) was used with both imide resins at 6.4 percent concentration. The shear strength was doubled in the case of the bisimide with no loss of flammability characteristics. The modified trisimide laminate also had improved properties over the unmodified one. The dynamic mechanical analysis of a four-ply laminate indicated a glass transition temperature above 300 C. Scanning electron micrographs of the ATBN modified imide resins were also recorded.
    Keywords: COMPOSITE MATERIALS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 74
    facet.materialart.
    Unknown
    Analysis of laminated composite shells using a degenerated 3-D element (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: A special three-dimensional element based on the total Lagrangian description of the motion of a layered anisotropic composite medium is developed, validated and employed to analyze laminated anisotropic composite shells. The element contains the following features: geometric nonlinearity, dynamic (transient) behavior and arbitrary lamination scheme and lamina properties. Numerical results of nonlinear bending, natural vibration, and transient response are presented to illustrate the capabilities of the element.
    Keywords: STRUCTURAL MECHANICS
    Type: International Journal for Numerical Methods in Engineering (ISSN 0029-5981); 20; 1991-200
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 75
    facet.materialart.
    Unknown
    Chemical feasibility of lithium as a matrix for structural composites (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: The chemical compatibility of lithium with tows of carbon and aramid fibers and silicon carbide and boron monofilaments was investigated by encapsulating the fibers in liquid lithium and also by sintering. The lithium did not readily wet the various fibers. In particular, very little lithium infiltration into the carbon and aramid tows was achieved and the strength of the tows was seriously degraded. The strength of the boron and silicon carbide monofilaments, however, was not affected by the liquid lithium. Therefore lithium is not feasible as a matrix for carbon and aramid fibers, but a composite containing boron or silicon carbide fibers in a lithium matrix may be feasible for specialized applications.
    Keywords: COMPOSITE MATERIALS
    Type: Composites (ISSN 0010-4361); 15; 305-309
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 76
    facet.materialart.
    Unknown
    Investigating compression failure mechanisms in composite laminates with a transient fiberglass-epoxy birefringent material (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: An experimental study is reported in which a nondestructive technique involving the use of a transparent fiberglass-epoxy composite birefringent material has been used to investigate compression failure mechanisms in graphite-epoxy laminates. It is shown that the birefringency and transparency of the fiberglass-epoxy material permits regions of high stress to be located and the mechanisms of local failure propagation to be identified within the laminate. The material may also be useful for studying stress fields and for identifying failure initiation and propagation mechanisms in a wide variety of composite-structure problems.
    Keywords: COMPOSITE MATERIALS
    Type: Experimental Techniques (ISSN 0732-8818); 8; 24
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 77
    facet.materialart.
    Unknown
    Practical implementation of the double linear damage rule and damage curve approach for treating cumulative fatigue damage (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Simple procedures are given for treating cumulative fatigue damage under complex loading history using either the damage curve concept or the double linear damage rule. A single equation is given for use with the damage curve approach; each loading event providing a fraction of damage until failure is presumed to occur when the damage sum becomes unity. For the double linear damage rule, analytical expressions are given for determining the two phases of life. The procedure comprises two steps, each similar to the conventional application of the commonly used linear damage rule. Once the sum of cycle ratios based on Phase I lives reaches unity, Phase I is presumed complete, and further loadings are summed as cycle ratios based on Phase II lives. When the Phase II sum attains unity, failure is presumed to occur. It is noted that no physical properties or material constants other than those normally used in a conventional linear damage rule analysis are required for application of either of the two cumulative damage methods described. Illustrations and comparisons are discussed for both methods.
    Keywords: STRUCTURAL MECHANICS
    Type: International Journal of Fracture; 17; Apr. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 78
    facet.materialart.
    Unknown
    Surface phenomena in elasticity (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Problems of elasticity associated with the behavior of free surfaces of elastic bodies are reviewed with particular reference to the propagation of characteristic waves and the criteria of wrinkling of free surfaces. All transformations are given for the case when a free surface of an elastic body is streamlined by the flow of inviscid fluid. The wrinkling phenomenon is illustrated by example.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Elasticity; 11; Apr. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 79
    facet.materialart.
    Unknown
    Carbon/graphite composite material study. Appendix C: NASA studies on modification of carbon/graphite fibers and alternative materials (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The feasibility of modifying resin matrix composites to reduce the potential of electrical shorting from fire released fiber was explored. The effort included modifications to or coatings for graphite fibers, alternative fibers, modifications to matrix materials, and hybrid composites. The objectives included reduction of the conductivity of the graphite fiber, char formation to reduce fiber release, glass formation to prevent fiber release, catalysis to assure fiber consumption in a fire, and replacement of the graphite fibers with nonconductive fibers of similar mechanical potential.
    Keywords: COMPOSITE MATERIALS
    Type: Executive Office of the President Carbon(Graphite Composite Material Study; p 101-105
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 80
    facet.materialart.
    Unknown
    Carbon-fiber technology (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The state of the art of PAN based carbon fiber manufacture and the science of fiber behavior is surveyed. A review is given of the stabilization by oxidation and the subsequent carbonization of fibers, of the apparent structure of fibers deduced from scanning electron microscopy, from X-ray scattering, and from similarities with soft carbons, and of the known relations between fiber properties and heat treatment temperature. A simplified model is invoked to explain the electrical properties of fibers and recent quantum chemical calculations on atomic clusters are used to elucidate some aspects of fiber conductivity. Some effects of intercalation and oxidative modification of finished fibers are summarized.
    Keywords: COMPOSITE MATERIALS
    Type: American Chemical Society The 16th Natl. Symp. on Polymers in the Serv. of Man; p 125-130
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 81
    facet.materialart.
    Unknown
    Measurements of mixed-mode crack surface displacements and comparison with theory (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The problem of a finite-width tension specimen containing a crack oriented at various angles to the load axis is attacked from experimental and theoretical viewpoints. Displacements of an electro-machined slot, 12.5 mm long and oriented at angles of 0, 15, 30, 45, 60, and 75 deg, are measured using a laser-based in-plane measuring technique. Various width specimens, ranging from a crack-length/width ratio of 0.167 to 0.794, are tested. A boundary-integral equation method is extended to deal with the presence of a sharp crack. Agreement between the two approaches is generally good except near the tips of the cracks.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 82
    facet.materialart.
    Unknown
    Green's function for a crack emanating from a circular hole in an infinite sheet (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Stress-intensity factors, K/I/ and K/II/, are obtained for a point loaded crack emanating from a circular hole in an infinite plate. A series approach and the Muskhelishvili formulation in the two-dimensional theory of elasticity are used to derive the solution. The applicability of the solution is demonstrated by using it as a Green's function to obtain K/I/ and K/II/ and the case of (1) biaxial tension of an infinite plate and (2) bending of a wide strip.
    Keywords: STRUCTURAL MECHANICS
    Type: International Journal of Fracture; 16; Aug. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 83
    facet.materialart.
    Unknown
    Response of a panel to a supersonic turbulent boundary layer - Studies on a theoretical model (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A study of the response of a clamped panel to a supersonic turbulent boundary layer, based on a recently developed theoretical model, is presented. It is demonstrated that the model incorporates the effect of coupling between the panel motion and the flow of the surrounding fluid. Further, a Ritz-Galerkin method is used to obtain approximate solutions for the statistics of the panel response to the turbulence. The numerical results are compared with previous experimental data and the theoretical model is assessed.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Sound and Vibration; 71; July 22
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 84
    facet.materialart.
    Unknown
    Vibration and buckling of rectangular plates under in-plane hydrostatic loading (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Numerical solutions are presented for the fundamental natural frequency and mode shape of a rectangular plate loaded by in-plane hydrostatic forces for a wide variety of aspect ratios, boundary conditions, and load magnitudes. All six possible combinations of simply supported and clamped edges are considered. The limiting conditions of unloaded vibration and buckling are discussed in detail, with emphasis on the preferred mode shape. Design curves and approximate formulae are presented which provide a simple means of determining the fundamental frequency parameter.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Sound and Vibration; 70; June 22
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 85
    facet.materialart.
    Unknown
    Preparation of cast aluminum alloy-mica particle composites (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A method for making aluminum-mica particle composites is presented in which mica particles are stirred in molten aluminum alloys followed by casting in permanent molds. Magnesium is added either as an alloying element or in the form of pieces to the surface of the alloy melts to disperse up to 3 wt% mica powders in the melts and to obtain high recoveries of mica in the castings. The mechanical properties of the aluminum alloy-mica composite decrease with increasing mica content; however, even at 2.2% it has a tensile strength of 14.22 kg/sq mm with 1.1% elongation, a compression strength of 42.61 kg/sq mm, and an impact strength of 0.30 kgm/sq cm. Cryogenic and self-lubricating bearing are mentioned applications.
    Keywords: COMPOSITE MATERIALS
    Type: Journal of Materials Science; 15; May 1980
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 86
    facet.materialart.
    Unknown
    Identification of large flexible structures mass/stiffness and damping from on-orbit experiments (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Two methods for identifying the mass, damping and stiffness matrices of a linear vibrating system are presented. Both methods require the measurement of acceleration, velocity and displacement at various locations of the system. In the first method, the response of the system subjected to known forces is used while the second method employs the free vibration data. The unknown parameters are recovered through the standard least squares procedure. Numerical results are presented for several examples.
    Keywords: STRUCTURAL MECHANICS
    Type: JPL Proc. of the Workshop on Appl. of Distributed System Theory to the Control of Large Space Struct.; p 511-520
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 87
    facet.materialart.
    Unknown
    Vibration suppression in large space structures (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The problem of potential instability caused by actuator dynamics is examined. Two ways of overcoming it are discussed: rate feedback with compensation and position feedback with tuning filters.
    Keywords: STRUCTURAL MECHANICS
    Type: JPL Proc. of the Workshop on Appl. of Distributed System Theory to the Control of Large Space Struct.; p 119-142
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 88
    facet.materialart.
    Unknown
    Nonlinear structural and life analyses of a combustor liner (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: (Previously announced in STAR as N82-24501)
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 89
    facet.materialart.
    Unknown
    Determination of normal modes from measured complex modes (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A technique is presented for computing a set of normal modes from a set of measured complex modes. The number of elements in the modal vectors, which is equal to the number of measurements, can be larger than the number of modes under consideration. It is also shown that the practice of normal mode approximation to complex modes can lead to very large errors when the modes are too complex. A numerical example and a simulated experiment illustrate the concepts discussed and support the theory presented.
    Keywords: STRUCTURAL MECHANICS
    Type: Shock and Vibration Inform. Center The Shock and Vibration Bull., No. 52. Part 5; p 13-17
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 90
    facet.materialart.
    Unknown
    Required developments in structural dynamics (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The finite element method, modal component synthesis, and the use of fast Fourier transformation were key developments in structural dynamics in the past 15 to 20 years. Current areas requiring additional effort include: (1) the correct calculation of modal shape and natural frequencies for complex structures; (2) the correlation of math models with test data; (3) the establishment of a criteria for "goodness" of the correlation between analysis and test; (4) the selection of the correct displacement functions when using computer programs for modal synthesis; (5) accuracy of response calculations; and (6) the inverse problem of determining the force problem from the response data. Trends identified include the use of distributed computing, greater reliance on analysis, and the possible use of artificial intelligence techniques, or some way of feeding back information, to provide solution guidance to engineers.
    Keywords: STRUCTURAL MECHANICS
    Type: Shock and Vibration Inform. Center The Shock and Vibration Bull., No. 52. Part 1; p 49-54
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 91
    facet.materialart.
    Unknown
    The usage of substructuring analyses in the Get Away Special (GAS) program (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The use of automatic multi-stage substructing analysis is demonstrated for a hypothetical case of a GAS container supported by structural channels with a simulated experimental package inside the container. The GAS program purpose is stated and potential candidate structures to support experimental packages are discussed. The GAS container model and the substructuring analysis capabilities of NASTRAN make it possible to study the experiments inside the container as well as the design constraints resulting from the support structures holding the containers. The use of substructuring in the GAS program could be an important factor in increasing the number of flight opportunities.
    Keywords: STRUCTURAL MECHANICS
    Type: Georgia Univ. 10th NASTRAN User's Colloq.; p 204-215
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 92
    facet.materialart.
    Unknown
    Ultrasonic and mechanical characterizations of fatigue states of graphite epoxy composite laminates (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Results of an exploration of the relationship between ultrasonic attenuation and fatigue survivability of graphite fiber epoxy composites fabricated under different cure conditions are reported. A total of 9 27 x 40 cm eight-ply graphite epoxy laminated specimens were formed, and fatigue tests were run on five partial samples at 73.5 N varying at 30 Hz, with tests ending at a 1.27 cm deflection. A pulsed oscillator generated sinusoidal waves and transducers recorded the passage of the ultrasonic waves for display on oscilloscopes. Cure pressures ranged from 0.52-0.85 MPa and cure temperatures were in the 150-200 C interval. Ultrasonic through-transmission at 4 MHz was performed prior to and during fatigue testing. The minimum void volume fraction occurred at 175 C and 0.86 MPa. The flexural stiffness decreased with the number of fatigue cycles past 10,000, when the attenuation also increased. Correlations were found between the 4.0 MHz signal attenuation and the void volume fraction, and between the number of fatigue cycles to failure and the 4.0 MHz signal attenuation.
    Keywords: COMPOSITE MATERIALS
    Type: Materials Evaluation; 40; Apr. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 93
    facet.materialart.
    Unknown
    Reliability-based optimization under random vibration environment (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A methodology of formulating the optimum design problem for structural systems with random parameters and subjected to random vibration as a mathematical programming problem is presented. The proposed method is applied to the optimum design of a cantilever beam with a tip mass and a truss structure supporting a water tank. The excitations are assumed to be Gaussian processes and the geometric and material properties are taken to be normally distributed random variables. The probabilistic constraints are specified for individual failure modes since it is easier to specify the reliability level for each failure mode keeping in view the consequences of failure in that particular mode. The time parameter appearing in the random vibration based constraints is eliminated by replacing the probabilities of failure by suitable upper bounds. The numerical results demonstrate the feasibility and effectiveness of applying the reliability-based design concepts to structures with random parameters and operating in random vibration environment.
    Keywords: STRUCTURAL MECHANICS
    Type: Computers and Structures; 14; 5-6,; 1981
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 94
    facet.materialart.
    Unknown
    SPAR analysis of LDEF vibration characteristics (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: This paper presents a structural dynamic modeling of the Long Duration Exposure Facility (LDEF), which is a Space Shuttle payload of passive scientific experiments contained in trays mounted on a large cylindrically shaped structure. Special detailed finite element modeling, using the SPAR system of computer programs was required to obtain good agreement between analytical and test vibrations modes. Experimental trays contributed significantly to overall LDEF stiffnesses, and these contributions were realistically represented for each tray by the stiffness matrix of an equivalent orthotropic panel in the overall LDEF SPAR model. Orthotropic stiffnesses for this panel were obtained from finely detailed statically loaded tray SPAR models in which stiffness coupling was accounted for along with partial relative sliding allowed by the tray clamping attachments. Joint boundary conditions were also significant in the structural dynamic modeling of LDEF, and static data proved valuable in assessing modeling of local end fittings.
    Keywords: STRUCTURAL MECHANICS
    Type: Computers and Structures; 13; Aug. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 95
    facet.materialart.
    Unknown
    Property changes of a graphite/epoxy composite exposed to nonionizing space parameters (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A study has been made of the changes in the mass, thickness and flexural properties of initially wet and dry specimens of graphite/epoxy composite material due to the equivalent of eight weeks of exposure to nonionizing space environmental parameters. The parameters were near and middle solar UV irradiance, high vacuum, and temperature. The flexural properties were not affected by the exposures. Changes occurred to the mass, dimensions, and surface morphology of the specimens which varied with individual and combined parameter exposures. The combined UV and elevated thermal environment had synergistic effects on the properties of the specimens.
    Keywords: COMPOSITE MATERIALS
    Type: Journal of Composite Materials; 14; Oct. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 96
    facet.materialart.
    Unknown
    Existence of axisymmetric modes of thin cylindrical shells with axial displacement restraint (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A necessary and sufficient condition is derived for the existence of the axisymmetric mode of cylindrical shells with a radial displacement having one half wave along the axis and axial displacement restrained at both ends. The condition is purely geometric and consists of an upper bound on the mean radius of thickness ratio for a given fixed value of the length to mean radius ratio, above which the mode with one half wave in radial displacement along the axis ceases to exist. The proof is based on enforcing two basic lemmas concerned with the simplicity of the eigenvalues of the shell and the uniform ordering of these eigenvalues with the number of nodes of their corresponding radial displacement eigenfunctions.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Sound and Vibration; 74; Feb. 8
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 97
    facet.materialart.
    Unknown
    An assessment of buffer strips for improving damage tolerance of composite laminates (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Graphite/epoxy panels with buffer strips were tested in tension to measure their residual strength with crack-like damage. Panels were made with (45/0/-45/90)2S and (45/0/-45/0)2S layups. The buffer strips were parallel to the loading direction. They were made by replacing narrow strips of the 0 deg graphite plies with strips of either 0 deg S-Glass/epoxy or Kevlar-90/epoxy on either a one-for-one or a two-for-one basis. In a third case, 0 deg graphite/epoxy was used as the buffer material and thin, perforated Mylar strips were placed between the 0 deg plies and the cross-plies to weaken the interfaces and thus to isolate the 0 deg plies. Some panels were made with buffer strips of different width and spacings. The buffer strips arrested the cracks and increased the residual strengths significantly over those of plain laminates without buffer strips. A shear-lag type stress analysis correctly predicted the effects of layup, buffer material, buffer strip width and spacing, and the number of plies of buffer material
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Composite Materials Supplement; 14; 1, 19; 1980
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 98
    facet.materialart.
    Unknown
    Development and evaluation of two non-linear shell elements (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Two plate and shell displacement elements are developed for use in large deflection non-linear analysis. The elements are of the 'stability' type, in which non-linear strains are included, with their values optimized by added higher order membrane functions and special types of elemental level constraints. The paper summarizes formulation and computational procedures, and discusses numerical results in detail. Conclusions are given regarding the effectiveness of the elements for solving both linear and non-linear shell analysis problems.
    Keywords: STRUCTURAL MECHANICS
    Type: International Journal for Numerical Methods in Engineering; 16; Oct. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 99
    facet.materialart.
    Unknown
    Positron annihilation studies of moisture in graphite-reinforced composites (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The positron lifetime technique of monitoring absorbed moisture is applied to several composites, including graphite/polymides which are candidates for high-temperature (over 260 C) applications. The experimental setup is a conventional fast-slow coincidence system wherein the positron lifetime is measured with respect to a reference time determined by the detection of a nuclear gamma ray emitted simultaneously with the positron. From the experiments, a rate of change of positron mean lifetime per unit mass of water can be determined for each type of specimen. Positron lifetime spectra are presented for a graphite/polyimide composite and for a pure polyimide.
    Keywords: COMPOSITE MATERIALS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 100
    facet.materialart.
    Unknown
    Carbon/graphite composite material study, appendix A and appendix B (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A comprehensive assessment of the possible damage to electrical and electronic equipment caused by accidental release of carbon fibers from burning civil aircraft with carbon composite parts was completed. The study concluded that the amount of fiber likely to be released is much lower than initially predicted. Carbon fiber released from an aircraft crash fire was found (from atmospheric dissemination models) to disperse over a much larger area than originally estimated, with correspondingly lower fiber concentrations. Long term redissemination of fiber was shown to be insignificant if reasonable care is exercised in accident cleanup. The vulnerability of electrical equipment to structural fibers in current use was low. Consumer appliances, industrial electronics, and avionics were essentially invulnerable to carbon fibers. Shock hazards (and thus potential injury or death) were found to be extremely unlikely.
    Keywords: COMPOSITE MATERIALS
    Type: Executive Office of the President Carbon(Graphite Composite Material Study; p 48-100
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...