ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Life and Medical Sciences  (6,945)
  • Fluid Mechanics and Thermodynamics
  • 1985-1989  (6,321)
  • 1950-1954  (683)
Collection
Publisher
Years
Year
  • 1
    Publication Date: 2011-08-26
    Description: In the design of a combustor, information is necessary for the mixing of the fuel and air in order to determine the optimum combustor length. In scramjet combustors the mixing often takes place in a shear layer that is formed between the fuel and air. This research was an experimental study of shear layers in supersonic flows aimed at determining what mechanisms affect the shear layer so that the mixing could be better predicted. A second goal was to provide sufficient instream information for use in checking existing Computational Fluid Dynamic (CFD) codes. The shear layer between a supersonic two-dimensional air stream (M = 2 or M = 3) was mixed with a near sonic two-dimensional air stream (M = 1.2). Instream measurements of pitot pressure and cone static pressure were used to determine mean velocity profiles at various axial locations. These velocity profiles were used to determine the shear layer spreading rate and are compared with various predictions. Wall measurements of static pressure, temperature and skin friction were also taken and are presented. The instream measurements were also used for comparison with an existing CFD code. The upstream velocity, pressure and temperature profiles were used as a starting profile and the code was used to calculate downstream profiles for comparison with the experimental results. Reasonable agreement between the measured and calculated results was obtained.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: CN-164-463
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 2
    Publication Date: 2004-12-03
    Description: This paper presents a set of second-order closure models for low-Reynolds-number turbulence near the wall. Existing closure models for the Reynolds-stress equations were modified to show proper near-wall behavior. A dissipation-rate equation for the turbulent kinetic energy is also reformulated. The proposed models satisfy realizability and will not produce unphysical behavior. Fully developed channel flows are used for model testing. The equations are solved for the mean velocity, the Reynolds stresses, and the dissipation rate of the turbulent kinetic energy. The calculations are compared with both direct numerical simulations and with measurements. It is shown that the present models perform well in predicting the behavior of the turbulence near a wall. Significant improvements over previous models in predicting the components of the Reynolds stress tensor are obtained in the present models.
    Keywords: Fluid Mechanics and Thermodynamics
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 3
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2018-06-09
    Description: Hi-Tech Inc., a company which manufactures water jetting equipment, needed a high pressure rotating swivel, but found that available hardware for the system was unsatisfactory. They were assisted by Marshall, which had developed water jetting technology to clean the Space Shuttles. The result was a completely automatic water jetting system which cuts rock and granite and removes concrete. Labor costs have been reduced; dust is suppressed and production has been increased.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: Spinoff 1985; 85
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 4
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2018-06-09
    Description: Stars and Stripes racing yacht brought the American's Cup back to the United States. Originating from NASA's drag reduction technology, the boats "secret weapon" was that the hull's underside was coated with riblets. Riblets are small, barely visible grooves on the surface of an airplane intended to reduce skin friction by smoothing the turbulent airflow next to the skin. Grooves are V-shaped with the angle pointing in the direction of the airflow. No deeper than a scratch, they have a pronounced beneficial influence on air turbulence. *No longer commercially available.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: Spinoff 1987; 66-67
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 5
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2018-06-09
    Description: Macrodyne, Inc.'s laser velocimeter (LV) is a system used in wind tunnel testing of aircraft, missiles and spacecraft employing electro optical techniques to probe the flow field as the tunnel blows air over a model of flight vehicle and to determine velocity of air and its direction at many points around the model. However, current state-of-the-art minicomputers cannot handle the massive flow of real time data from several sources simultaneously. Langley developed instrument Laser Velocimeter Autocovariance Buffer Interface (LVABI). LVABI is interconnecting instrument between LV and computer. It acquires data from as many as six LV channels at high real time data rates, stores it in memory and sends it to computer on command. LVABI has application in variety of research, industrial and defense functions requiring precise flow measurement.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: Spinoff 1988; 87
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 6
    Publication Date: 2019-06-28
    Description: An approximate method for development of flow and thermal boundary layers in laminar regime on cylinders with arbitrary cross section and transpiration-cooled walls is obtained by use of Karman's integrated momentum equation and an analogous heat-flow equation. Incompressible flow with constant property values throughout boundary layer is assumed. Shape parameters for approximated velocity and temperature profiles and functions necessary for solution of boundary-layer equations are presented as charts, reducing calculations to a minimum. The method is applied to determine local heat-transfer coefficients and surface temperature-cooled turbine blades for a given flow rate. Coolant flow distributions necessary for maintaining uniform blade temperatures are also determined.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-RM-E51F22
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 7
    Publication Date: 2019-06-28
    Description: The presence of radomes and instruments that are sensitive to water films or ice formations in the nose section of all-weather aircraft and missiles necessitates a knowledge of the droplet impingement characteristics of bodies of revolution. Because it is possible to approximate many of these bodies with an ellipsoid of revolution, droplet trajectories about an ellipsoid of revolution with a fineness ratio of 10 were computed for incompressible axisymmetric air flow. From the computed droplet trajectories, the following impingement characteristics of the ellipsoid surface were obtained and are presented in terms of dimensionless parameters: (1) total rate of water impingement, (2) extent of droplet impingement zone, and (3) local rate of water impingement. These impingement characteristics are compared briefly with those previously reported for an ellipsoid of revolution with a fineness ratio of 5.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-TN-3147
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 8
    Publication Date: 2019-06-28
    Description: An investigation at a free-stream Mach number of 2.02 was made to determine the effects of a propulsive jet on a wing surface located in the vicinity of a choked convergent nozzle. Static-pressure surveys were made on a flat surface that was located in the vicinity of the propulsive jet. The nozzle was operated over a range of exit pressure ratios at different fixed vertical distances from the flat surface. Within the scope of this investigation, it was found that shock waves, formed in the external flow because of the presence of the propulsive jet, impinged on the flat surface and greatly altered the pressure distribution. An integration of this pressure distribution, with the location of the propulsive jet exit varied from 1.450 propulsive-jet exit diameters to 3.392 propulsive-jet exit diameters below the wing, resulted in an incremental lift for all jet locations that was equal to the gross thrust at an exit pressure ratio of 2.86. This incremental lift increased with increase in exit pressure ratio, but not so rapidly as the thrust increased, and was approximately constant at any given exit pressure ratio.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-RM-L54E05a
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 9
    Publication Date: 2019-06-28
    Description: Numerical solutions of the differential equation obtained from the momentum theorem for the development of a turbulent boundary layer along a thermally insulated surface in two-dimensional and in radial shock-free flow are presented in tabular form for a range of Mach numbers from 0.100 to 10. The solution can be used in a step-wise procedure with any given distribution of favorable pressure gradients and for zero pressure gradients. Solutions are also given for use with moderate adverse pressure gradients. The mean velocity in the boundary layer is approximated by a power-law profile. In view of the stepwise integration methods to be used, the exponent designated the profile shape can be varied along the surface between the integral fraction limits 1/5 and 1/11 through interpolation. Agreement obtained between theoretical and experimental boundary-layer development in a supersonic nozzle at a nominal Mach number of 2 indicates the general validity of the approximations used in the analysis - in particular, the method of extrapolating low-speed skin-friction relations to high Mach number flows. The extrapolation method used assumes that the skin-friction coefficient depend primarily on Reynolds number, provided that the density and the kinematic viscosity are evaluated at surface conditions.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-TN-2045
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 10
    Publication Date: 2019-06-28
    Description: The condensation pressure of air was determined over the range of temperature from 60 to 85 K. The experimental results were slightly higher than the calculated values based on the ideal solution law. Heat of vaporization of oxygen was determined at four temperatures ranging from about 68 to 91 K and of nitrogen similarly at four temperatures ranging from 62 to 78 K.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-TN-2969
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 11
    Publication Date: 2019-06-28
    Description: The heat requirements for the icing protection of two radome configurations have been studied over a range of design icing conditions. Both the protection limits of a typical thermal protection system and the relative effects of the various icing variables have been determined. For full evaporation of all impinging water, an effective heat density of 14 watts per square inch was required. When a combination of the evaporation and running wet surface systems was employed, a heat requirement of 5 watts per square inch provided protection at severe icing and operating conditions.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-RM-E53A22
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 12
    Publication Date: 2019-06-28
    Description: The Navier-Stokes equations of motion and the equation of continuity are transformed so as to apply to an orthogonal curvilinear coordinate system rotating with a uniform angular velocity about an arbitrary axis in space. A usual simplification of these equations as consistent with the accepted boundary-layer theory and an integration of these equations through the boundary layer result in boundary-layer momentum-integral equations for three-dimensional flows that are applicable to either rotating or nonrotating fluid boundaries. These equations are simplified and an approximate solution in closed integral form is obtained for a generalized boundary-layer momentum-loss thickness and flow deflection at the wall in the turbulent case. A numerical evaluation of this solution carried out for data obtained in a curving nonrotating duct shows a fair quantitative agreement with the measures values. The form in which the equations are presented is readily adaptable to cases of steady, three-dimensional, incompressible boundary-layer flow like that over curved ducts or yawed wings; and it also may be used to describe the boundary-layer flow over various rotating surfaces, thus applying to turbomachinery, propellers, and helicopter blades.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-TR-1067
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 13
    Publication Date: 2019-06-28
    Description: The trajectories of droplets in the air flowing past NACA 65(1)-208 airfoil and an NACA 65(1)-212 airfoil, both at an angle of attack of 4 degrees, were determined. The amount of water in droplet form impinging on the airfoils, the area of droplet impingement, and the rate of droplet impingement per unit area on the airfoil surface affected were calculated from the trajectories and are presented. The amount, extent, and rate of impingement of the NACA 65(1)-208 airfoil are compared with the results for the NACA 65(1)1-212 airfoil. Under similar conditions of operation, the NACA 65(1)-208 airfoil collects less water than the NACA 65(1)-212 airfoil. The extent of impingement on the upper surface of the NACA 65(1)-208 airfoil is much less than on the upper surface of the NACA 65(1)-212 airfoil, but on the lower surface the extents of impingement are about the same.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-TN-2952
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 14
    Publication Date: 2019-07-13
    Description: A conservative zoning technique, wherein the flow field for a finite-difference calculation is divided into several regions to simplify grid generation, is discussed and is applied in the solution of a two-dimensional problem of complex topology. Calculations are performed on two zonal, or patched, grid systems for the supersonic flow over a double-airfoil configuration. The solution is smooth and continuous across the zonal interfaces, and shock waves pass through the boundaries without distortion. In addition, the time accuracy of the zonal boundary method is verified by a two-zone cylinder calculation with a stationary inner and a rotating outer mesh. The feasibility of the zonal approach for use in the solution of geometrically complex and unsteady problems is thus demonstrated.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: Fluid Dynamics; Jun 25, 1984 - Jun 27, 1984; Snowmass, CO; United States|Computers and Fluids (ISSN 0045-7930); 14; 1; 43-58
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 15
    Publication Date: 2019-06-27
    Description: An investigation of forced-convection heat transfer and associated pressure drops was conducted with air flowing through electrically heated Inconel tubes having various degrees of square-thread-type roughness, an inside diameter of 1/2 inch, and a length of 24 inches. were obtained for tubes having conventional roughness ratios (height of thread/radius of tube) of 0 (smooth tube), 0.016, 0.025, and 0.037 over ranges of bulk Reynolds numbers up to 350,000, average inside-tube-wall temperatures up to 1950deg R, and heat-flux densities up to 115,000 Btu per hour per square foot. Data The experimental data showed that both heat transfer and friction increased with increase in surface roughness, becoming more pronounced with increase in Reynolds number; for a given roughness, both heat transfer and friction were also influenced by the tube wall-to-bulk temperature ratio. Good correlation of the heat-transfer data for all the tubes investigated was obtained by use of a modification of the conventional Nusselt correlation parameters wherein the mass velocity in the Reynolds number was replaced by the product of air density evaluated at the average film temperature and the so-called friction velocity; in addition, the physical properties of air were evaluated at the average film temperature. The isothermal friction data for the rough tubes, when plotted in the conventional manner, resulted in curves similar to those obtained by other investigators; that is, the curve for a given roughness breaks away from the Blasius line (representing turbulent flow in smooth tubes) at some value of Reynolds number, which decreases with increase in surface roughness, and then becomes a horizontal line (friction coefficient independent of Reynolds number). A comparison of the friction data for the rough tubes used herein indicated that the conventional roughness ratio is not an adequate measure of relative roughness for tubes having a square-thread-type element. The present data, as well as those of other investigators, were used to isolate the influence of ratios of thread height to width, thread spacing to width, and the conventional roughness ratio on the friction coefficient. A fair correlation of the friction data was obtained for each tube with heat addition when the friction coefficient and Reynolds number were defined on the basis of film properties; however, the data for each tube retained the curve characteristic of that particular roughness. The friction data for all the rough tubes could be represented by a single line for the complete turbulence region by incorporating a roughness parameter in the film correlation. No correlation was obtained for the region of incomplete turbulence.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-RM-E52D17 , E-2482
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 16
    Publication Date: 2019-06-27
    Description: Research was conducted to determine the effect of the electrode parameters of spacing, configuration, and material' on the energy required for ignition of a flowing propane-air mixture. In addition, the data were used to indicate the energy distribution along the spark length and to confirm previous observations concerning the effect of spark duration on ignition energy requirements. The data were obtained with a mixture at a fuel-air ratio of 0.0835 (by weight), a pressure of 3 inches of mercury absolute, a temperature of 80 F, and a mixture velocity of 5 feet per second. Results showed that the energy required for ignition decreased as the electrode spacing was increased; a minimum energy occurred at. a spacing of 0.65 inch for large electrodes. For small electrodes, the spacing for minimum energy was not sharply defined. Small-diameter electrodes required less energy than large-diameter electrodes if the spacing was less than the optimum distance of 0.65 inch; at a spacing equal to the optimum distance, no difference was noted. Significant effects of electrode material on ignition energy were ascribed to differences in the type of spark discharges produced; glow discharges required higher energy than the arc-glow discharges. With pure glow discharges, the ignition energy was substantially constant for lead, cadmium, brass, aluminum, and tungsten electrodes. A method is described for determining the energy distribution along a glow discharge. It was found that one-third to one-half of the energy in the spark was concentrated in a small region near the cathode electrode, and the remainder was uniformly distributed across the spark gap. It was impossible to ascertain the dependence of ignition on. this distribution. It was also observed that long-duration (600 microsec) sparks required much less energy for ignition than did short-duration (1 microsec) sparks.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-RM-E51J12 , E-2394
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 17
    Publication Date: 2019-06-27
    Description: No abstract available
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-RM-E50I29A , REPT-2003
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 18
    Publication Date: 2019-06-27
    Description: No abstract available
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-RM-E50I29A
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 19
    Publication Date: 2019-08-17
    Description: A vapor block resistant liquid artery structure for heat pipes. A solid tube artery with openings is encased in the sintered material of a heat pipe wick. The openings are limited to that side of the artery which is most remote from the heat source. The liquid in the artery can thus exit the artery through the openings and wet the sintered sheath, but vapor generated at the heat source is unlikely to move around the solid wall of the artery and reverse its direction in order to penetrate the artery through the openings. An alternate embodiment uses finer pore size wick material to resist vapor entry.
    Keywords: Fluid Mechanics and Thermodynamics
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 20
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2019-08-17
    Description: A thermal microstructure measurement system (TMMS) operates autonomously h its own internal power supply and telemeters data to a platform. A thermal array is mounted on a cross-braced frame designed to orient itself normal to existing currents with fixed sensor positioning bars protruding from the cross bars. A plurality of matched thermistors, conductivity probes and inclinometers are mounted on the frame. A compass and pressure transducer are contained in an electronics package suspended below the array. The array is deployed on a taut mooring below a subsurface float. Data are digitized, transmitted via cable to a surface buoy and then telemetered to the platform where the data is processed via a computer, recorded and/or displayed. The platform computer also sends commands to the array via telemetry.
    Keywords: Fluid Mechanics and Thermodynamics
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 21
    Publication Date: 2019-07-12
    Description: Tests of a 1/5 scale model of a proposed 153-foot high-speed submarine have been conducted in the Langley full-scale tunnel at the request of the Bureau of Ships, Department of the Navy. The test program included: (1) force tests to determine the drag, control effectiveness, and static stability characteristics for a number of model configurations, both in pitch and in yaw, (2) pressure measurements to determine the boundary-layer conditions and flow characteristics in the region of the propeller, and (3) an investigation of the effects of propeller operation on the model aerodynamic characteristics. In response to oral requests from the Bureau of Ships representatives t hat the basic data obtained in these tests be made available to them as rapidly as possible, this data report has been prepared to present some of the more pertinent results. All test results given in the present paper are for the propeller-removed condition and were obtained at a Reynolds number of approximately 22,300,000 based on model length.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-RM-SL50E09a
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 22
    Publication Date: 2019-07-12
    Description: Transfer functions descriptive of the response of most engine variables were determined from transient data that were obtained from approximate step inputs in fuel flow and in exhaust-nozzle area. The speed responses of both spools to fuel flow and to turbine-inlet temperature appeared as identical first-order lags. Response to exhaust-nozzle area was characterized by a first-order lag response of the outer-spool speed, accompanied by virtually no change in inner-spool speed.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-RM-E54J11
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 23
    Publication Date: 2019-07-12
    Description: The static lateral- and directional-stability characteristics of a high-speed fighter-type airplane, obtained from wind-tunnel tests of a model, are presented. The model consisted of a thin, unswept wing of aspect ratio 2.3 and taper ratio 0.385, a body, and a horizontal tail mounted in a high position on a vertical tail. Rolling-moment, yawing moment, and cross-wind-force coefficients are presented for a range of sideslip angles of -5 deg. to +5 deg, for Mach numbers of 0.90, 1.45, and 1.90. Data are presented which show the effects on the lateral and directional stability of: (1) component parts of the complete model, (2) modification of the empennage so as to provide different heights of the horizontal tail above the wing plane, (3) angle of attack, and (4) dihedral of the wing.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-RM-SA54H26b
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 24
    Publication Date: 2019-07-12
    Description: An improved efficiency arcjet thruster has a constrictor and electrically-conductive nozzle anode defining an arc chamber, and an electrically-conductive rod having a tip spaced upstream from the constrictor and defining a cathode spaced from the anode by a gap generally coextensive with the arc chamber. An electrical potential is applied to the anode and cathode to generate an electrical arc in the arc chamber from the cathode to anode. Catalytically decomposed hydrazine is supplied to the arc chamber with generation of the arc so as to produce thermal heating and expansion thereof through the nozzle. The constrictor can have a electrically insulative portion disposed between the cathode tip and the nozzle anode, and an electrically-conductive anode extension disposed along the insulative portion so as to define an auxiliary gap with the cathode tip substantially smaller than the gap defined between the cathode and nozzle anode for facilitating startup of arc generation. The constrictor can also include an electrically-conductive electrode with a variable electrical potential to vary the shape of the arc generated in the arc chamber. Also, the cathode is mounted for axial movement such that the gap between its tip and the nozzle anode can be varied to facilitate a generally nonerosive generation of the electrical arc at startup and reliable steady state operation. Further, the arc chamber can have a nonparallel subsonic-to-supersonic transition configuration, or alternatively solely a nonparallel supersonic configuration, for improved arc attachment.
    Keywords: Fluid Mechanics and Thermodynamics
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 25
    Publication Date: 2019-08-15
    Description: A vapor block resistant liquid artery structure for heat pipes. A solid tube artery with openings is encased in the sintered material of a heat pipe wick. The openings are limited to that side of the artery which is most remote from the heat source. The liquid in the artery can thus exit the artery through the openings and wet the sintered sheath, but vapor generated at the heat source is unlikely to move around the solid wall of the artery and reverse its direction in order to penetrate the artery through the openings. An alternate embodiment uses finer pore size wick material to resist vapor entry.
    Keywords: Fluid Mechanics and Thermodynamics
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 26
    Publication Date: 2019-07-11
    Description: Investigations were conducted of a 12 degree 21-inch conical diffuser of 2:l area ratio to determine the interrelation of boundary layer growth and performance characteristics. surveys were made of inlet and exit from, longitudinal static pressures were recorded, and velocity profiles were obtained through an inlet Reynolds number range, determined From mass flows and based on inlet diameter of 1.45 x 10(exp 6) to 7.45 x 10(exp 6) and a Mach number range of 0.11 to approximately choking. These investigations were made to two thicknesses of inlet boundary layer. The mean value, over the entire range of inlet velocities, of the displacement thickness of the thinner inlet boundary layer was approximately 0.035 inch and that of the thicker inlet boundary layer was approximately six times this value. The loss coefficient in the case of the thinner inlet boundary layer had a value between 2 to 3 percent of the inlet impact pressure over most of the air-flow range. The loss coefficient with the thicker inlet boundary layer was of the order of twice that of the thinner inlet boundary layer at low speeds and approximately three times at high speeds. In both cases the values were substantially less than those given in the literature for fully developed pipe flow. The static-pressure rise for the thinner inlet boundary layer was of the order of 95 percent of that theoretically possible over the entire speed range. For the thicker inlet boundary layer the static pressure rise, as a percentage of that theoretically possible, ranged from 82 percent at low speeds to 68 percent at high speeds.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-RM-L9H10
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 27
    Publication Date: 2019-07-11
    Description: Performance and boundary-layer data were taken in a 12 degree 10-inch inlet-diameter conical diffuser of 2:1 exit- to inlet-area ratio. These data were taken for two inlet-boundary-layer conditions. The first condition was that of a thinner inlet boundary later (boundary-layer displacement thickness, delta* approximately equal to 0.034) produced by an inlet section approximately 1 inlet diameter in length between the entrance bell and the diffuser. The second condition was a thicker inlet boundary layer (delta* approximately equal to 0.120) produced by an additional inlet section length of approximately 6 diameters. Longitudinal static-pressure distributions were measured fro wall static orifices. Transverse total- and static-pressure surveys were made at the inlet and exit stations. Boundary-layer velocity distributions were measured at seven stations between the inlet and exit. These data were obtained for a Reynolds number (based on inlet diameter) range of 1 x 10(exp 6) to 3.9 x 10(exp 6). The corresponding Mach number range was from M = 0.2 to choking. At the maximum-power-available condition supersonic flow was obtained as far as 4.5 inches downstream from the diffuser inlet with a maximum Mach number of M approximately equal to 1.5. The total-pressure loss through the diffuser in percentage of inlet dynamic pressure was approximately 2.5 percent for the thinner inlet boundary later and 5.5 percent for the thicker inlet boundary later over the lower subsonic range. These valued increased with increasing flow rate- the values for the thicker inlet boundary later more than those for the thinner inlet boundary layer. The diffuser effectiveness, expressed as the ratio of the actual static-pressure rise to the ideal static-pressure rise, was about 85 percent for the thinner inlet boundary layer and about 67 percent for the thicker inlet boundary later in the lower subsonic range. These values decrease with increasing flow rate. Separated flow was observed for both inlet-boundary-layer conditions in the region of adverse pressure gradient just downstream of the transition curvature from inlet section to diffuser. The flow for the thinner-inlet-boundary-layer condition did not fully re-establish itself along the diffuser walls. The thicker inlet-boundary-layer flow, while not completely re-establishing the normal flow pattern downstream of the separated region, did re-establish more successfully than the thinner inlet boundary layer.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-RM-L50C02a
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 28
    Publication Date: 2019-08-28
    Description: Method and apparatus for obtaining dynamic calibrations of pressure transducers. A calibration head (15), a flexible tubing (23) and a bellows (20) enclose a volume of air at atmospheric pressure with a transducer (11) to be calibrated subject to the pressure inside the volume. All of the other apparatus in the drawing apply oscillations to bellows (20) causing the volume to change thereby applying oscillating pressures to transducer (11) whereby transducer (11) can be calibrated.
    Keywords: Fluid Mechanics and Thermodynamics
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 29
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2019-08-28
    Description: The invention does away with the necessity of moving parts such as a check valve in a nuclear reactor cooling system. Instead, a jet pump, in combination with a TEMP, is employed to assure safe cooling of a nuclear reactor after shutdown. A main flow exists for a reactor coolant. A point of withdrawal is provided for a secondary flow. A TEMP, responsive to the heat from said coolant in the secondary flow path, automatically pumps said withdrawn coolant to a higher pressure and thus higher velocity compared to the main flow. The high velocity coolant is applied as a driver flow for the jet pump which has a main flow chamber located in the main flow circulation pump. Upon nuclear shutdown and loss of power for the main reactor pumping system, the TEMP/jet pump combination continues to boost the coolant flow in the direction it is already circulating. During the decay time for the nuclear reactor, the jet pump keeps running until the coolant temperature drops to a lower and safe temperature where the heat is no longer a problem. At this lower temperature, the TEMP/jet pump combination ceases its circulation boosting operation. When the nuclear reactor is restarted and the coolant again exceeds the lower temperature setting, the TEMP/jet pump automatically resumes operation. The TEMP/jet pump combination is thus automatic, self-regulating and provides an emergency pumping system free of moving parts.
    Keywords: Fluid Mechanics and Thermodynamics
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 30
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2019-08-28
    Description: A space vehicle thermal heat rejection system 10 utilizing separate optimized heat pipe components for the functions of heat acquisition, heat transport, and heat rejection. A honeycomb panel heat pipe evaporator section 20 performs the function of heat acquisition, and forms a closed thermodynamic system with a dual channel heat pipe transport section 30, which performs the function of heat transport. A plurality of truss or channel core heat pipe rejection fins 41 form the condenser section 40, which performs the function of heat rejection. A common wall 32 separates the condenser section 40 from the transport section 30. Using the above heat pipe components and having efficient interfacing between them results in high performance factors for the overall system.
    Keywords: Fluid Mechanics and Thermodynamics
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 31
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2019-08-28
    Description: A fluid leak indicator (30) for detecting and indicating leaks in visually inaccessible fluid tubing joints (20, 21), such as those obstructed by insulation (24), includes a bag system (25) and a wicking system (30) surrounding or wrapping the joints (20, 21) under the visual obstructing material (24). Leaking fluid is collected in the bag (25) or on the wicking material (34) where it is conducted along the wicking material (34) to a visibly accessible capturing transparent indicator bulb (35) for providing a visual indication of the leak without requiring a chemical change in the capturing indicator bulb (35).
    Keywords: Fluid Mechanics and Thermodynamics
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 32
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2019-07-13
    Description: This document presents equations for the two-dimensional stationary problem of gas dynamics, and uses them to derive other equations, including equations for vorticity.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-TM-1260 , Prikladnaya Matematika I Mekhanica; 11; 193-198
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 33
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2019-07-13
    Description: The vortices forming in flowing water behind solid bodies are not represented correctly by the solution of the potential theory nor by Helmholtz's jets. Potential theory is unable to satisfy the condition that the water adheres at the wetted bodies, and its solutions of the fundamental hydrodynamic equations are at variance with the observation that the flow separates from the body at a certain point and sends forth a highly turbulent boundary layer into the free flow. Helmholtz's theory attempts to imitate the latter effect in such a way that it joins two potential flows, jet and still water, nonanalytical along a stream curve. The admissibility of this method is based on the fact that, at zero pressure, which is to prevail at the cited stream curve, the connection of the fluid, and with it the effect of adjacent parts on each other, is canceled. In reality, however, the pressure at these boundaries is definitely not zero, but can even be varied arbitrarily. Besides, Helmholtz's theory with its potential flows does not satisfy the condition of adherence nor explain the origin of the vortices, for in all of these problems, the friction must be taken into account on principle, according to the vortex theorem.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-TM-1256 , Zeitschrift fuer Mathematik und Physik; 56; 1; 1-37
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 34
    Publication Date: 2019-07-13
    Description: The use of the linearized equations of Chaplygin to calculate the subsonic flow of a gas permits solving the problem of the flow about a wing profile for absence and presence of circulation. The solution is obtained in a practical convenient form that permits finding all the required magnitudes for the gas flow (lift, lift moment velocity distribution over the profile, and critical Mach number). This solution is not expressed in simple closed form; for a certain simplifying assumption, however, the equations of Chaplygin can be reduced to equations with constant coefficients, and solutions are obtained by using only the mathematical apparatus of the theory of functions of a complex variable. The method for simplifying the equations was pointed out by Chaplygin himself. These applied similar equations to the solution of the flow problem and obtained a solution for the case of the absence of circulation.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-TM-1250 , Prikladnaya Matematika I Mekhanika; 11; 1; 105-118
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 35
    Publication Date: 2019-07-13
    Description: In the flow about a body with large subsonic velocity if the velocity of the approaching flow is sufficiently large, regions of local supersonic velocities are formed about the body. It is known from experiment that these regions downstream of the flow are always bounded by shock waves; a continuous transition of the supersonic velocity to the subsonic under the conditions indicated has never been observed. A similar phenomenon occurs in pipes. If at two cross sections of the pipe the velocity is subsonic and between these sections regions of local supersonic velocity are formed without completely occupying a single cross section, these regions are always bounded by shock waves.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-TM-1251 , Prikladnaya Matematika I Mekhanika; 11; 190-202
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 36
    Publication Date: 2019-07-13
    Description: A steady incompressible three-dimensional viscous flow analysis has been conducted for the Space Shuttle External Tank/Orbiter propellant feed line disconnect flapper valves with upstream elbows. The full Navier-Stokes code, INS3D, is modified to handle interior obstacles. Grids are generated by SVTGD3D code. Two dimensional initial grids in the flow cross section with and without the flappers are improved by elliptic smoothing to provide better orthogonality, clustering and smoothness to the three dimensional grid. The flow solver is tested for stability and convergence in the presence of interior flappers. An under-relaxation scheme has been incorporated to improve the solution stability. Important flow characteristics such as secondary flows, recirculation, vortex and wake regions, and separated flows are observed. Computed values for forces, moments, and pressure drop are in satisfactory agreement with water flow test data covering a maximum tube Reynolds number of 3.5 x 10(exp 6). The results will serve as a guide to improved design and enhanced testing of the disconnect.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: AIAA PAPER 88-3788 , AIAA/ASME/SIAM/APS National Fluid Dynamics Congress; Jul 25, 1988 - Jul 28, 1988; Cincinnati, OH; United States
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 37
    Publication Date: 2019-07-13
    Description: Combustion testing at total enthalpy conditions corresponding to flight Math numbers in excess of 12 requires the use of impulse facilities. The expansion tube is the only operational facility of its size which can provide these conditions without excessive oxygen dissociation or driver gas contamination. Expansio tube operation is described herein and the operational parameters having the largest impact on its performance are determined. These are: driver-to-intermediate chamber pressure ratio, driver gas molecular weight and specific heat ratio, and driver gas temperature. Increases in the lase named parameter will markedly affect the test section static pressure. Preliminary calibration tests are discussed and test gas conditions which have been achieved are presented. Calculated and experimental test times are compared and the parameters affecting test time are discussed. The direction of future work using this important experimental tool is indicated.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: AIAA Paper-89-2536 , AIAA/ASME/SAE/ASEE 25th Joint Propulsion Conference; Jul 10, 1989 - Jul 12, 1989; Monterey, CA; United States
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 38
    Publication Date: 2019-07-11
    Description: The two-dimensional motion of an incompressible fluid about a closed contour with a definite velocity in magnitude and direction at infinity is considered. If, without changing the direction of the velocity at infinity, the magnitude is increased, the configuration of the streamlines remains unchanged and only the numbering of the stream function changes. There exists only one family of curves that can serve as streamlines in the incompressible flow about a given contour (at a given angle of attack); for example, the contour of an airplane wing. The case is quite different with a compressible fluid.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-TM-1252 , Izvestia Akademii Nauk, SSSR, No. 3; 153-259; Rept-3
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 39
    Publication Date: 2019-07-12
    Description: The performance of a 16-stage axial-flow compressor, in which the mean-radius solidity was reduced from 1.28 to 1.02 in the fourteenth through sixteenth stage rotors was determined. The performance of this modification was compared with that of the compressor with original rotors. The reduced solidity resulted in slightly improved performance.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-RM-E52D22
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 40
    Publication Date: 2019-07-12
    Description: An investigation to determine the steady-state and surge characteristics of the J57-P-1 two-spool turbojet engine with various inlet air-flow distortions was conducted in the altitude wind tunnel at the NACA Lewis laboratory. Along with a uniform inlet total-pressure distribution, one circumferential and three radial pressure distortions were investigated. Data were obtained over a complete range of compressor speeds both with and without intercompressor air bleed at a flight Mach number of 0.8 and at altitudes of 35,000 and 50,000 feet. Total-pressure distortions of the magnitudes investigated had very little effect on the steady-state operating line for either the outer or inner compressor. The small radial distortions investigated also had engine over that obtained with the uniform inlet pressure distribution. The circumferential distortion, however, raised the minimum speed at which the engine could operate without encountering surge when the intercompressor bleeds were closed. This increase in minimum speed resulted in a substantial reduction in the operable speed range accompanied by a reduction in the altitude operating limit.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-RM-SE54K19
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 41
    Publication Date: 2019-07-12
    Description: The performance and operational characteristics of the J71-A2 turbojet-engine afterburner were investigated for a range of altitudes from 23,000 to 60,000 feet at a flight Mach number of 0,9 and at flight Mach numbers of 0.6, 0.9, and 1.0 at an altitude of 45,000 feet. The combustion performance and altitude operational limits, as well as the altitude starting characteristics have been determined.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-RM-SE54J06
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 42
    Publication Date: 2019-07-12
    Description: Inadvertent slot opening in a circulation controlled rotor due to plenum valve leakage is averted by venting duct pressure below a control minimum. A vent valve is disclosed.
    Keywords: Fluid Mechanics and Thermodynamics
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 43
    Publication Date: 2019-07-12
    Description: A freezing point method and device (10) are disclosed. The method and device pertain to an inflection point technique for determining the freezing points of mixtures. In both the method and device (10), the mixture is cooled to a point below its anticipated freezing point and then warmed at a substantially linear rate. During the warming process, the rate of increase of temperature of the mixture is monitored by, for example, thermocouple (28) with the thermocouple output signal being amplified and differentiated by a differentiator (42). The rate of increase of temperature data are analyzed and a peak rate of increase of temperature is identified. In the preferred device (10) a computer (22) is utilized to analyze the rate of increase of temperature data following the warming process. Once the maximum rate of increase of temperature is identified, the corresponding temperature of the mixture is located and earmarked as being substantially equal to the freezing point of the mixture. In a preferred device (10), the computer (22), in addition to collecting the temperature and rate of change of temperature data, controls a programmable power supply (14) to provide a predetermined amount of cooling and warming current to thermoelectric modules (56).
    Keywords: Fluid Mechanics and Thermodynamics
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 44
    Publication Date: 2019-07-12
    Description: Low efficiency heat transfer in evaporators subject to unusual gravitational conditions is avoided through the use of a spiral evaporator conduit 12 receiving at an inlet 14 a vaporizable coolant at least partly in the liquid phase. Flow of the coolant through the conduit 12 demists the coolant by centrifuging the liquid phase against a pressurre wall 44 of the conduit 12. Vapor flow 40 induces counterrotating vortices 46, 48 which circulate the liquid phase coolant around the interior of the conduit 12 to wet all surfaces thereof.
    Keywords: Fluid Mechanics and Thermodynamics
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 45
    Publication Date: 2019-07-12
    Description: Surge characteristics of the XJ34-WE-32 turbojet engine were determined over a range of altitudes. Several typical oscillograph traces during which surge occurred are presented. The effect of altitude on the surge line and it's relation to the steady-state operating region are shown.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-RME51J02
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 46
    Publication Date: 2019-07-12
    Description: An investigation of the nature of the flow field behind a rectangular circular-arc wing has been conducted in the Langley 9-inch supersonic tunnel. Pitot- and static-pressure surveys covering a region of flow behind the wing have been made together with detailed pitot surveys throughout the region of the wake. In addition, the flow direction has been measured using a weathercocking vane measurements. Theoretical calculations of the variation of both downwash and sidewash with angle of attack using Lagerstrom's superposition method have been made. In addition the effect of the wing thickness on the sidewash with the wing at 0 angle of attack has been evaluated. Near an angle of attack of 0, agreement between theory and experiment is good, particularly for the downwash results, except in the plane of the wing, inboard of the tip. In this region the proximity of the shed vortex sheet and the departure of the spanwise distribution of vorticity from theory would account for the disagreement. At higher angles of attack prediction of downwash depends on a knowledge of the location of the trailing vortex sheet, in order that the downwash may be corrected for its displacement and distortion. The theoretical location of the trailing vortex sheet, based on the theoretical downwash values integrated downstream from the wing trailing edge, is shown to differ widely from the experimental case. The rolling-up of the trailing vortex sheet behind the wing tip is evidenced by both the wake surveys and the flow-angle measurements.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-RM-L50G12 , NACA Rept 1340
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 47
    Publication Date: 2019-07-12
    Description: The first four stages were found to cause a major part of the poor low-speed efficiency of this compressor. The low design-speed over-all pressure ratio at surge was caused by the first and the twelfth to fifteenth stages. The multiple over-all performance curves in the intermediate-speed range were at least partly the result of double-branched characteristic curves for the third and seventh stages.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-RM-SE54J19
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 48
    Publication Date: 2019-07-12
    Description: A cooling assembly for fuel cells having a simplified construction whereby coolant is efficiently circulated through a conduit arranged in serpentine fashion in a channel within a member of such assembly. The channel is adapted to cradle a flexible, chemically inert, conformable conduit capable of manipulation into a variety of cooling patterns without crimping or otherwise restricting of coolant flow. The conduit, when assembled with the member, conforms into intimate contact with the member for good thermal conductivity. The conduit is non-corrodible and can be constructed as a single, manifold-free, continuous coolant passage means having only one inlet and one outlet. The conduit has an internal coil means which enables it to be bent in small radii without crimping.
    Keywords: Fluid Mechanics and Thermodynamics
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 49
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2019-07-12
    Description: Means for sealing the tip 18 of a rotor turbine blade 10 against tip leakage flow comprising a multiplicity of recesses 30 formed in the surface of the tip 18. The recesses 30 are preferably formed in a labyrinthine or slaggered pattern which interposes at least one recess 30 in every leakage flow path across the tip 18 from the pressure side 26 to the suction side 28 of the blade 10.
    Keywords: Fluid Mechanics and Thermodynamics
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 50
    Publication Date: 2019-07-13
    Description: Among the concepts being considered for future Earth-to-orbit transport vehicles are fully reusable single-stage systems which take off vertically and land horizontally. Because these vehicles carry their own propellant internally, they are much larger than the present Space Shuttle Orbiter. One such single-stage vehicle under study is the circular body configuration which has the advantages of simple structural design and large volume-to-weight ratio. As part of an overall evaluation of this configuration, a series of heat transfer and surface flow tests were conducted. The phase-change paint and oil-flow tests were performed in the Langley 31-Inch Mach-10 Tunnel at angles of attack from 20 through 40 degrees in 5-degree increments. Heat-transfer coefficient data are presented for all angles of attack and detailed oil-flow photographs are shown for windward and leeward surfaces at 25 and 40 degrees angle of attack. In many ways, heating was similar to that previously determined for the Shuttle Orbiter so that, in a cursory sense, existing thermal protection systems would appear to be adequate for the proposed circular-body configurations.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: AIAA Paper 85-0974 , AIAA 20th Thermophysics Conference; Jun 19, 1985 - Jun 21, 1985; Williamsburg, VA; United States
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 51
    Publication Date: 2019-07-12
    Description: The present status of available information relative to the prediction of shock-induced boundary-layer separation is discussed. Experimental results showing the effects of Reynolds number and Mach number on the separation of both laminar and turbulent boundary layer are given and compared with available methods for predicting separation. The flow phenomena associated with separation caused by forward-facing steps, wedges, and incident shock waves are discussed. Applications of the flat-plate data to problems of separation on spoilers, diffusers, and scoop inlets are indicated for turbulent boundary layers.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: NACA-RM-L53I16a
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 52
    Publication Date: 2019-07-12
    Description: A plasma electrothermal thruster includes a capillary passage in which a plasma discharge is formed and directed out of an open end of the passage into a supersonic nozzle. Liquid supplied to the capillary passage becomes partially atomized to cool a confining surface of the passage. The plasma discharge is formed as the atomized liquid flows out of the open end into a supersonic equilibrium nozzle. The discharge can have a duration greater than the two way travel time of acoustic energy in the capillary to cause the plasma to flow continuously through the nozzle during the time of the discharge pulse.
    Keywords: Fluid Mechanics and Thermodynamics
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 53
    Publication Date: 2019-07-12
    Description: An improved heat pipe with an external artery. The longitudinal slot in the heat pipe wall which interconnects the heat pipe vapor space with the external artery is completely filled with sintered wick material and the wall of the external artery is also covered with sintered wick material. This added wick structure assures that the external artery will continue to feed liquid to the heat pipe evaporator even if a vapor bubble forms within and would otherwise block the liquid transport function of the external artery.
    Keywords: Fluid Mechanics and Thermodynamics
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 54
    Publication Date: 2019-08-26
    Description: The theory of Taylor and Maccoll (Ref,1) gives the surface pressure on an infinite cone in supersonic flow as a function of the cone vertex angle and the free stream Mach number and static pressure for a gas of vanishing viscosity. When a slender conical probe is used together with an impact pressure probe to determine the static pressure and Mach number in a low density gas stream, it is desirable to have some theoretical estimate of the effect of viscous boundary layer on the probe readings. Theoretical and experimental results with respect to impact probes have been presented in Refs. 5 and 6. A simple approximation for a conical probe based on linearized supersonic flow and compressible boundary layer theory is presented here.
    Keywords: Fluid Mechanics and Thermodynamics
    Type: HE-150-80
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 55
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2019-08-15
    Description: A rotor stage disposed within an annular fluid flowpath in a turbomachine is disclosed. The rotor stage includes outer and inner rings and a plurality of first and second airfoils. The outer and inner rings define flowpath surfaces for said flowpath. The first and second airfoils extend between the rings for transferring energy between the fluid and the rotor stage. At least one of the first airfoils surrounds means for transmitting energy across the flowpath.
    Keywords: Fluid Mechanics and Thermodynamics
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 56
    Publication Date: 2019-08-15
    Description: Fluidics flow control of a multiphase supply using a cylindrical chamber is achieved by introducing the supply flow radially into the chamber. The supply flow exits through a port in the center at the chamber. A control fluid is then introduced tangentially about 90.degree. upstream from the supply port. A second control fluid port may be added about 90.degree. upstream from the first control fluid port, but preferably two sets of supply and control ports are added with like ports diametrically opposite each other. The control fluid flows against the circular wall of the control chamber, which introduces a vortex in the flow of the supply flow that decays into a spiral path to the exit port in the center of the chamber. The control flow rate may thus be used to control the spiral path, and therefore the supply flow rate through the exit port.
    Keywords: Fluid Mechanics and Thermodynamics
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 57
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2019-08-15
    Description: Systems are described for using multiple closely-packed spheres. In one system for passing fluid, a multiplicity of spheres lie within a container, with all of the spheres having the same outside diameter and with the spheres being closely nested in one another to create multiple interstitial passages of a known size and configuration and smooth walls. The container has an inlet and outlet for passing fluid through the interstitial passages formed between the nested spheres. The small interstitial passages can be used to filter out material, especially biological material such as cells in a fluid, where the cells can be easily destroyed if passed across sharp edges. The outer surface of the spheres can contain a material that absorbs a constitutent in the flowing fluid, such as a particular contamination gas, or can contain a catalyst to chemically react the fluid passing therethrough, the use of multiple small spheres assuring a large area of contact of these surfaces of the spheres with the fluid. In a system for storing and releasing a fluid such as hydrogen as a fuel, the spheres can include a hollow shell containing the fluid to be stored, and located within a compressable container that can be compressed to break the shells and release the stored fluid.
    Keywords: Fluid Mechanics and Thermodynamics
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 58
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2019-08-15
    Description: A high efficiency forced air heat sink assembly employs a split feed transverse flow configuration to minimize the length of the air flow path through at least two separated fin structures. Different embodiments use different fin structure material configurations including honeycomb, corrugated and serpentine. Each such embodiment uses a thermally conductive plate having opposed exterior surfaces; one for receiving a component to be cooled and one for receiving the fin structures. The serpentine structured fin embodiment employs a plurality of fin supports extending from the plate and forming a plurality of channels for receiving the fin structures. A high thermal conductivity bondant, such as metal-filled epoxy, may be used to bond the fin structures to either the plate or the fin supports. Dip brazing and soldering may also be employed depending upon the materials selected.
    Keywords: Fluid Mechanics and Thermodynamics
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 59
    Publication Date: 2019-08-15
    Description: The Direct Simulation Monte Carlo (DSMC) method is applied in this paper to the study of rarefied, hypersonic, reentry flows. The assumptions and simplifications involved with the treatment of ionization, free electrons and the electric field are investigated. A new method is presented for the calculation of the electric field and handling of charged particles with DSMC. In addition, a two-step model for electron impact ionization is implemented. The flow field representing a 10 km/sec shock at an altitude of 65 km is calculated. The effects of the new modeling techniques on the calculation results are presented and discussed.
    Keywords: Fluid Mechanics and Thermodynamics
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 60
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 5 (1985), S. 1-15 
    ISSN: 0886-1544
    Keywords: contractile non-actin filaments ; dinoflagellates ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: The motility and fine structure of the marine planktonic dinoflagellate Kofoidinium and members of other related genera have been investigated. Several types of shape change were found to occur: slow morphogenetic changes (which also occurred as restitution movements in response to injury), movements associated with the ingestion of food and the evacuation of wastes, and more rapid movements concerned with the capture of prey. All these movements seemed to be brought about by the contraction of refractile tracts within the cytoplasm, which were found to contain 2.3-nm filaments, some with a complex striated appearance. This and other evidence suggests that these filaments, which have counterparts in many other protists, are not actin filaments.
    Additional Material: 22 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 61
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 5 (1985) 
    ISSN: 0886-1544
    Keywords: Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 62
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 5 (1985), S. 175-193 
    ISSN: 0886-1544
    Keywords: primary cilia ; connective tissues ; secretory organelles ; extracellular matrix ; cybernetic probe ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: More than 300 primary cilia have been identified electronmicroscopically in a variety of embryonic and mature connective tissue cells. To further define the enigmatic function of these cilia, we examined the interrelationships between the basal apparatus and cytoplasmic organelles and the ciliary shaft and the extracellular matrix. The basal diplosome was consistently associated with the secretory organelles including the maturing face of the Golgi complex, Golgi vacuoles and vesicles, the microtubular network, the plasma membrane, and coated pits and vesicles. Small vesicles and amorphous granules were also observed within the ciliary lumen and adjacent to the ciliary membrane. Microtubule-membrane bridges linked axonemal tubules to the ciliary membrane. The position, projection, and orientation of the axoneme were influenced by the structural organisation and mechanical properties of the matrix and frequently caused angulation of the ciliary shaft relative to the basal body. Located midway between the secretory apparatus and the extracellular matrix, primary cilia would appear ideally situated to mediate the necessry interaction between the cell and its surrounding environment prerequisite to the formation and maintenance of a functionally effective matrix. We propose that primary cilia in connective tissue cells could act as multifunctional, cellular cybernetic probes, receiving, transducing, and conducting a variety of extrinsic stimuli to the intracellular organelles responsible for effecting the appropriate homeostatic feedback response to changes in the extracellular microenvironment.
    Additional Material: 17 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 63
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 5 (1985), S. 239-249 
    ISSN: 0886-1544
    Keywords: tektins ; microtubules ; flagella ; cilia ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: Affinity-purified antibodies against Strongylocentrotus purpuratus sperm flagellar tektin polypeptides have been tested for cross-reactivity with microtubules isolated from various sources, using indirect immunofluorescent staining and antibody binding to nitrocellulose replicas of SDS polyacrylamide gels. The antitektins reacted with sperm tail axonemes from four genera of sea urchins and with cilia from sea urchin embryos. Antibody binding was observed only if the specimens were prefixed by methods that would not preserve them well at an ultrastructural level. However, even after such fixation regimes, no antibody binding was detected to cytoplasmic microtubule arrays in the same embryos, to mitotic spindles isolated from sea urchin or to gill cilia from a mollusc. We conclude that, if tektins are present in sea urchin egg cytoplasmic microtubules, they are sufficiently different from the sperm tektins to have no common strongly antigenic determinants.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 64
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 5 (1985), S. 333-350 
    ISSN: 0886-1544
    Keywords: eel sperm ; 9+0 flagellum ; motility ; helicoidal bending ; reactivation ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: The sperm flagella of the eel, Anguilla anguilla, are capable of vigorous motion in spite of having an axoneme with reduced structure that lacks the outer dynein arms, radial spokes and spoke heads, the two central tubules and the central tubule projections that are all part of the standard “9+2” axoneme. These sperm progress forward rapidly as a result of the propagation of helicoidal waves distally along the flagellum. Their flagellar beat frequencies are high, 93 Hz at 21°C, and they roll at a frequency of about 19 Hz. Eel sperm could be demembranated with Nonidet P-40 and reactivated with MgATP2- in 0.22 M K acetate at pH 8.1. The reactivated motility closely resembles that of the live sperm, with a beat frequency of 69 Hz, but the demembranated flagella are unusually fragile, and commonly disintegrate by a combination of splitting, coiling, and sliding within a few minutes. Little reactivation is obtained if acetate is replaced by Cl- in the reactivating medium. The Michaelis constant for beat frequency (0.2 mM) is similar to that obtained for several “9+2” flagella. These sperm, however, appear to lack the mechanism by which Ca2+ regulates waveform. Our results indicate that eel sperm flagella, which at rest are straight, are induced to bend helicoidally by ATP, as the result of sliding between tubules that is blocked at both the base and tip of the organelle. The flagellar waveform consists of a series of planar bends separated by short regions of right-handed twist, which give it an overall left-handed helicoidal form.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 65
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 5 (1985), S. 377-392 
    ISSN: 0886-1544
    Keywords: newt ; lung ; cilia ; beat frequency ; waveform ; models ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: Highly coupled newt lung ciliated cell models were used to study the effects of MgATP concentration on ciliary beat frequency and waveform. Models were prepared from ciliated lung cells of the newt Taricha granulosa by trypsin dissociation of the epithelium, demembranation with Triton X-100, and reactivation with MgATP, as described previously [Weaver and Hard, 1985]. Beat frequencies were measured stroboscopically. Ciliary waveforms of reactivated models and intact mucociliary epithelial sheets were determined by single frame analysis of high-speed movies. Waveform parameters calculated included the durations of the effective and recovery strokes, the angular velocities of the ciliary base and tip, the position of the bend along the ciliary shaft during the recovery stroke, the velocity of recovery stroke bend propagation, and the ratio of the duration of recovery stroke bend propagation to the duration of the recovery stroke itself. We found that beat frequency varied biphasically in response to MgATP at 21°C, as shown previously for isolated, individual, newt lung axonemes. Apparent Fmax (maximum beat frequency) and Km values of 25 Hz and 0.14 mM, and 35 Hz and 0.47 mM, respectively, were obtained for each linear segment of the biphasic double reciprocal plot. Demembranation did not alter either ciliary waveform or the pattern of coordination. In this system, metachrony is antilaeoplectic and ciliary waveform appears to be regulated independent of beat frequency.
    Additional Material: 8 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 66
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 6 (1986), S. 1-1 
    ISSN: 0886-1544
    Keywords: Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 67
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 5 (1985), S. 17-29 
    ISSN: 0886-1544
    Keywords: cell motility ; membrane recycling ; immunofluorescence microscopy ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: Mouse peritoneal macrophages subjected to gradients of activated mouse serum were found by immunofluorescence observations to have their Golgi apparatus and their microtubule-organizing center largely oriented in the direction of the gradient. By analogy with similar results obtained with motile fibroblasts, it is proposed that these two organelles are rapidly and coordinately reoriented inside the macrophages in order to direct the insertion of new membrane mass, via vesicles derived from the Golgi apparatus, into the leading edge of the cell. Consistent with the importance of such membrane insertion to cell migration, we found that the ionophore monensin, an inhibitor of Golgi functions, inhibited cell motility in the chemostactic gradient. It was further shown that several inhibitors of chemotaxis (monensin, cytochalasin D, cycloheximide) did not inhibit the reorientation of the Golgi apparatus/microtubule-organizing center in cells exposed to a chemotactic gradient, and that the reorientation required extracellular Ca+2.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 68
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 5 (1985), S. 491-506 
    ISSN: 0886-1544
    Keywords: Somitogenesis ; neurulation ; alpha-actinin ; morphogenesis ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: A discrete stage in two different morphogenetic processes has been examined employing fluorescently labelled alpha-actinin as a probe to localize native alpha-actinin and antibodies to localize fibronectin and collagen type I. The stage of somitogenesis examined is the transition from the compact mesenchymal somitic mass to the epithelial somitic vesicle (ie, epithelialization of the somite). The stage of neurulation examined is the transition from the relatively flat neuroepithelium to the approximation of the neural folds. Before these morphogenetic movements begin, the neuroepithelium is sitting upon a basal lamina and interstitial collagen, and the somite is surrounded by a meshwork of interstitial collagen. During both of these processes, the cells become narrowed at their apices in the region of the tissue that is becoming concave, and alpha-actinin is localized in the apices. The localization of intracellular alpha-actinin and extracellular fibronectin, and the distribution of collagen, suggest that there is a coordinated appearance and distribution of these molecules that is temporally associated with these discrete morphogenetic events.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 69
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 6 (1986), S. 2-14 
    ISSN: 0886-1544
    Keywords: Allogromia ; reticulopods ; cytoskeleton ; microtubules ; actin ; saltatory transport ; cell shape ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: Cytoskeletal inhibitors were used as probes to test the involvement of microtubules and actin microfilaments in the development, motility, and shape maintenance of the pseudopodial networks (i e, reticulopodia) of the foraminifers Allogromia sp strain NF and Allogromia laticcllaris. Agents that disassemble cytoplasmic microtubules (cold, colchicine, and nocodazole) arrest all movement but have variable effects on reticulopodial shape. Electron microscopy reveals a granulofibrillar matrix but few, if any, microtubules in these motility-arrested reticulopods. Allogromiids treated with cytochalasin B or D lose substrate adhesion and undergo dramatic changes in shape and motile behavior, highlighted by the coalescence of reticulopodial cytoplasm into irregularly shaped bodies with chaotic motility. Serial semithick sections of such preparations, viewed by high-voltage electron microscopy, document a striking rearrangement of microtubules within these cytochalasin-induced bodies. All aspects of cytochalasin-altered motility are completely inhibited by colchicine. Actin is present in reticulopodia, as determined by staining with rhodamine-phalloidin; this staining is not observed in cytochalasin-treated organisms. These data provide compelling evidence that microtubules are required for reticulopodial motility. An actin-based cytoskeleton is thought to play a role in maintaining shape, mediating pseudopod/substrate adhesion, and coordinating the various microtubule-dependent processes.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 70
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 5 (1985), S. 195-208 
    ISSN: 0886-1544
    Keywords: central pair ; radial spoke ; flagella ; mutant ; Chlamydomonas ; suppressor ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: Flash photomicrography at frequencies up to 300 Hz and computer-assisted image analysis have been used to obtain parameters describing the flagellar bending patterns of mutants of Chlamydomonas reinhardtii. All strains contained the uni1 mutation, to facilitate photography. The radial spoke head deficient mutant pf17, and the central pair deficient mutant, pf15, in combination with suppressor mutations that restore motility without restoring the ultrastructural or biochemical deficiencies, both generate forward mode bending patterns with increased shear amplitude and decreased asymmetry relative to the “wild-type” uni1 flagella described previously. In the reverse beating mode, the suppressed pf17 mutants generate reverse bending patterns with large shear amplitudes. Reverse beating of the suppressed pf15 mutants is rare. There is a reciprocal relationship between increased shear amplitude and decreased beat frequency, so that the velocity of sliding between flagellar microtubules is not increased by an increase in shear amplitude. The suppressor mutations alone cause decreased frequency and sliding velocity in both forward and reverse mode beating, with little change in shear amplitude or symmetry.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 71
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 5 (1985) 
    ISSN: 0886-1544
    Keywords: Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 72
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 5 (1985), S. 265-265 
    ISSN: 0886-1544
    Keywords: Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Additional Material: 1 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 73
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 6 (1986), S. 128-135 
    ISSN: 0886-1544
    Keywords: motion analysis ; axonal transport ; cytoplasmic transport ; Brownian motion ; AVEC-DIC microscopy ; saltatory particle motion ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: A survey study of organelle movements in a variety of cell types of plant and animal origin was made with the aid of video-enhanced contrast, differential interference contrast (AVEC-DIC) microscopy followed by fine analysis of the motile behavior of the individual organelles. We found that there exists besides Brownian motion a wide spectrum of active motions in cells, i.e. motion that is directionally biased through the expenditure of metabolic energy. The types of active motion seen range from a continuous motion (sometimes appearing as streaming) in plant cells and neurons to various types of less ordered and less well directed motion. We did not see any clear-cut qualitative difference between plant and animal cells or between systems presumed to be actin- and microtubule-based. A preliminary classification of the types of active motion is presented. The ongoing research activities, which aim at a more precise definition of the different types of motion by a set of quantitative parameters, are described, and the progress made so far is reported.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 74
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 5 (1985), S. 463-473 
    ISSN: 0886-1544
    Keywords: sponge dissociates ; cell migration ; time-lapse analysis ; cell aggregation ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: The production of both lamellipodia and peculiar thin protuberances (scleropodia) characterizes the preaggregative motility of cells after dissociation of the sponge Clathrina.The locomotory paths taken by cells before aggregation were recorded by time-lapse microcinematography. Changes of direction in successive 50-s time intervals and 50-s mean velocities of each cell were both taken into account as statistical variables. Their distributions give probability density curves that seem to fit bilateral exponential functions. The analysis of the angles of turn indicates a tendency for the cells to persist in their direction of motion and to make counter-clockwise turns. Implications of such in vitro cellular behaviors in aggregative and in vivo processes are suggested.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 75
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 6 (1986), S. 305-313 
    ISSN: 0886-1544
    Keywords: cytoplasmic streaming ; Setcreasea purpurea ; intracellular particle movements ; intercellular transport ; azide ; low temperature ; calcium ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: Cytoplasmic streaming and its response to azide and low temperature were examined by using high-resolution video-enhanced light microscopy in Setcreasea purpurea staminal hair cells of immature flowers. Particles and organelles examined moved along well-defined pathways, in repeated and unequal saltatory steps, at different rates and sometimes against the main direction of flow (bidirectionally) in both transvacuolar strand and peripheral cytoplasm. Particle movements were reversibly inhibited with azide. Low temperatures caused transvacuolar strands to shift or break. This cytoplasm accumulated in areas outside of the vacuole where spherosomes continued to saltate, but not along well-defined pathways. In the peripheral cytoplasm, however, the spherosomes continued to move normally, amyloplasts became swollen, and they plus the other organelles (except spherosomes) were stationary. Normal particle movements were obtained when chilled cells were rewarmed to 27°C for ca 15 min.
    Additional Material: 8 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 76
    ISSN: 0886-1544
    Keywords: Allogromia ; cytoplasmic transport ; microtubules ; reticulopod withdrawal ; tubulin-containing paracrystal ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: Bundles of microtubules (MTs) are readily visualized in vivo by videomicroscopy in highly flattened reticulopodia of the foraminiferan protozoan Allogromia sp. strain NF. In this report we use videomicroscopy, immunocytochemistry, and high-voltage electron microscopy to characterize the dynamic changes that occur in this extensive MT cytoskeleton, and in the associated cytoplasmic transport, during induced withdrawal and subsequent reextension of reticulopodia. Within seconds after application of the withdrawal stimulus (seawater substitute made hypertonic with MgCl2) intracellular bidirectional transport along linear MT-containing fibrils ceases and is replaced by an inward, constant-velocity flow of cytoplasm along the fibrils. As withdrawal continues, most fibrils become wavy and coalesce to form phase-dense pools. These wavy fibrils and phase-dense pools contain a paracrystalline material and few if any MTs. Same-section correlative immunofluorescence and high-voltage electron microscopy reveal that the paracrystalline material contains tubulin. During recovery linear fibrils (MTs) rapidly extend from the phase-dense pools (paracrystals), which concurrently shrink in size, thus reestablishing normal network morphology and motility. We conclude that the MT cytoskeleton in Allogromia reticulopodia is transfonned during withdrawal into a tubulin-containing paracrystal, which serves as a temporary reservoir of MT protein and an initiation site for MT regrowth.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 77
    ISSN: 0886-1544
    Keywords: marginal band ; spectrin ; vimentin ; surface-associated cytoskeleton ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: Platinum-carbon (Pt-C) replicas of freeze-dried erythrocyte cytoskeletons of the toad, Bufo marinus, were prepared using a modified Balzers 300 system. Examination in stereo of replicas of the microtubule-containing marginal band revealed filaments projecting from the microtubule walls to form links between adjacent microtubules. These cross-bridging proteins may bundle the microtubules into the configuration of the marginal band (MB) and may also serve to stabilize the structure. The MB appears to have linkages to components of the surface-associated cytoskeleton (SAC). The SAC forms a continuous matrix that spreads across the upper and lower surfaces of the cell adjacent to the plasma membrane and extends around the outer perimeter of the MB. Thus, the SAC encapsulates the MB and the central nucleus. After lysis, the elements of the cytoskeleton remain in a configuration similar to that found in the whole cell. Spectrin (fodrin) and actin were identified by immunofluorescence in the region of the SAC. When labeled with antibodies specific for vimentin and synemin, a network of intermediate filaments can be detected in the region between the nucleus and the MB. These vimentin filaments are also enclosed within the SAC and appear in Pt-C replicas to emerge from the area of the nuclear envelope. As the filaments extend toward the periphery of the cell, they form attachments to the SAC. Attachments of intermediate filaments to both the nucleus and the SAC thus appear to anchor the nucleus in its central position within the cytoskeleton.
    Additional Material: 11 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 78
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 6 (1986) 
    ISSN: 0886-1544
    Keywords: Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 79
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 6 (1986), S. 428-438 
    ISSN: 0886-1544
    Keywords: kinetochores ; spindle apparatus ; anaphase ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: We investigated the involvement of kinetochore microtubules (kMTs) in mediating chromosome-to-pole connections in crane-fly (Nephrotoma suturalis and Nephrotoma ferruginea) spermatocytes. Two experimental treatments were used to yield spindles with reduced numbers of nonkinetochore microtubules (nkMTs). Short-term (10-15 min) exposure of spermatocytes to 2°C caused depolymerization of the majority of nkMTs, resulting in a kMT:(kMT + nkMT) ratio of 0.76. Long-term (24h) exposure to 2°C followed by recovery at 6°C resulted in a kMT:(kMT + nkMT) ratio of 0.55, the spindle having more nkMTs than a 2°C-treated spindle but fewer than an untreated spindle, in which the kMT:(kMT + nkMT) ratio was 0.27. The numbers and lengths of kMTs in 6°C-grown spindles were similar to those in untreated cells, suggesting that the overall inhibition of MT assembly at 6°C apparently did not affect the mechanism by which kMTs are formed. We observed most kMTs of early anaphase spindles to be long (〉3 μm), and many extended to the polar regions of the spindle. Thus, the crane-fly spindle appears not to be as atypical as it was previously suggested to be.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 80
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 6 (1986), S. 469-478 
    ISSN: 0886-1544
    Keywords: plant microtubules ; mitosis ; cytokinesis ; plant cell culture ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: Treatment with 10 μm taxol disrupted mitotic and cytoplasmic arrays of microtubules (MT) in cultured cells of two higher plants, Vicia hajastana (vetch) and Zinnia elegans. When treated for 1, 24, and 48 h, cells in both cultures showed similar effects. After 1 h, multipolar arrays of MT were noted in prophase, large aster-like arrays of MT appeared in metaphase, and extra MT shared poles with otherwise normal-appearing metaphase and anaphase configurations. After 24 and 48 h, some phragmoplasts were multipartite or misplaced. In interphase cells, micronuclei and multinucleate cells were evidence of irregular mitosis and cytokinesis. Cytoplasmic MT in elongated cells were oriented parallel to, instead of at right angles to the long axis of the cell. Some interphase cells lost asymmetry while maintaining organized arrays of MT. Taxol appears to disrupt mitotic and cytoplasmic arrays of MT, seemingly overriding the mechanism(s) regulating MT polymerization and orientation.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 81
    ISSN: 0886-1544
    Keywords: basal body ; centrosome ; ciliated epithelium ; ciliary rootlet ; cortex of metozoan ciliated cells ; monoclonal antibody ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: Basal bodies from laying quail oviduct were semipurified and used as immunogen to produce monoclonal antibodies. On 38 clones obtained and among those staining the apical pole of the ciliated cell, CC-310 was chosen because it labeled the apical region with a punctated aspect, suggesting a staining of basal bodies or of basal body-associated structures; the basal pole was also labeled.The ultrastructural localization performed by the immunogold technique showed that the labeling was mainly associated with the striated rootlets. The basal feet, the side of the basal bodies, and the basal poles of the demembranated cells were also decorated. The identification of the antigen performed by immunoblots of deciliated cortices revealed two proteins of 175,000 and 40,000, whereas immunoblots of basal bodies showed only the 175,000-mw protein. The possibility of these two proteins sharing the same epitope, located at both poles of the cell, is discussed.Immunofluorescence ascertained that CC-310 decorated the striated rootlets in ciliated epithelia from other species: mussel, frog, and human tissue. Finally, when tested on cultured cell lines, CC-310 labeled the centrosome and its associated rootlets on PtK2 during interphase. During mitosis the poles of the mitotic spindle were stained without any apparent rootlet-like structure.
    Additional Material: 8 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 82
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 5 (1985), S. 81-101 
    ISSN: 0886-1544
    Keywords: fast axonal transport ; isolated axoplasm ; video microscopy ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: The development of AVEC-DIC microscopy and the application of this method to the study of fast axonal transport in isolated axoplasm extruded from the giant axon of the squid Loligo pealei provides a new paradigm for analyzing the intracellular transport of membranous organelles. The size of the axon, the number of transported particles, and the absence of permeability barriers like the plasma membrane in this preparation permit many experiments that are difficult or impossible to perform using other model systems. The use and features of this preparation are described in detail and a number of properties are evaluated for the first time. The process of extrusion is characterized. Particle movement is evaluated both in the interior of extruded axoplasm and along individual fibrils that extend from the periphery of perfused axoplasm. The role of divalent cations, particularly Ca2+, and the effects of elevated Ca2+ on axoplasmic organization and transport are analyzed. A series of pharmacological agents and polypeptides that alter cytoskeletal organization are used to examine the role of microfilaments and microtubules in fast transport. Finally, the effects of depleting ATP and of adding ATP analogues are discussed. The extruded axoplasm preparation is shown to be an invaluable model system for biochemical and pharmacological analyses of the molecular mechanisms of intracellular transport.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 83
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 5 (1985), S. 225-237 
    ISSN: 0886-1544
    Keywords: neural crest ; migratory behavior ; microfilaments ; stress fibers ; tractional force ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: We have investigated one aspect of the migratory behavior of quail neural crest (NC) cells by comparing the organization of microfilament bundles and the ability to distort migratory substrata by NC, somite, and notochord cells in vitro. In contrast to the numerous cytoplasmic stress fibers in somite-derived fibroblasts and notochord cells revealed by rhodamine-phalloidin staining and thin-section electron microscopy, microfilaments in NC cells are restricted to the cell cortex. To test the relative degrees of tension generated by these cell types on the underlying substratum, cells were cultured in collagen gels and on distortable silicone rubber sheets. Explanted somites and notochords produced dramatic radial alignment of 750 μg/ml collagen gels, whereas neural crest cells only aligned gels of lower concentrations. Fibroblasts did not migrate individually from explanted somites and notochords into 250 μg/ml collagen gels as readily as into higher concentration collagen lattices. In contrast, neural crest cells migrated into matrices of low concentration as well as into higher concentration collagen gels. Neural crest cells and their pigmented derivatives did not distort silicone rubber sheets, whereas somite and notochord-derived fibroblasts wrinkle this substratum after 4 days in culture. Thus, the differences in organization of the actin cytoskeleton reflect the tractional force exerted by these cells on their substratum. We hypothesize that the migratory behavior of NC cells in vivo may be related to their ability to translocate through embryonic extracellular matrices while generating relatively weak adhesions with the substratum, whereas the stronger forces generated by other embryonic cell types upon the delicate extracellular matrix may restrict their migration and may be associated with other morphogenetic events.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 84
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 7 (1987) 
    ISSN: 0886-1544
    Keywords: Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 85
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 7 (1987), S. 87-93 
    ISSN: 0886-1544
    Keywords: movement ; flagellar ; beat, flagellar ; stigma ; high-speed microcinematography ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: Chlamydomonas cells sucked onto micropipettes were filmed at 500 frames/sec and analyzed as to their forward beating mode. A comparison with freely swimming cells revealed that the flagella of the sucked cells beat in a normal threedimensional manner, with beat frequencies that correspond to those of freely swimming cells. Most beats were synchronous. but not symmetrical; cis- and trans-flagellum appear to beat in a slightly different manner. Some cells beat synchronously throughout, but mostly synchrony was interrupted by a single asynchrony or up to incessant asynchronies, caused by transient accelerations of the trans- (fo-) flagellum. Only rarely did cis- and trans-flagella have different but constant beat frequencies. Helical swimming of Chlamydomonas more likely is due to the beat asymmetries of the two flagella than to differences of beat frequencies. In our records, the stigma is on the inside of the helical swimming path.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 86
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 7 (1987), S. 78-86 
    ISSN: 0886-1544
    Keywords: conservative nucleoskeletal epitopes ; in situ cross-reacting antibodies ; immunofluorescence microscopy ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: The vegetative giant nucleus of the unicellular and uninucleate marine green alga Acetabularia is a depot of conservative epitopes, homologous to antigenic determinants of vertebrate actin, myosin, actinin, and vinculin. The epitopes appear at the nucleolar surface (actin, actinin, vinculin determinants), in the caryoplasm (actin, myosin determinants), along “caryoplasmic” filaments (actin determinants), and in “nuclear envelope plus perinuclear bodies” (actin, myosin, actinin, vinculin determinants). The structure homologies of the nuclear antigenic determinants to those of the vertebrate muscular and/or microfilamental proteins were deduced from in situ cross-reaction of anti-chicken actin (cross-reaction also with rabbit actin), anti-chicken alpha actinin, anti-chicken vinculin, and anti-bovine myosin (cross-reaction also with chicken myosin), respectively, by indirect immunofluorescence microscopy. Artifacts which arise from the binding of contaminating unspecific markers or from unspecific adherence of specific ones to the algal nucleus have been overcome by the use of both polyclonal and/or monoclonal immunoglobulins as primary markers and different types of second markers each conjugated with fluorescein isothiocyanate (FITC). Fluorescein staining of primary markers was performed either with fluorescent anti-immunoglobulin antibodies in a one-step (AIA-FITC) or highly sensitive two-step procedure (AIA/AIA-FITC), covalently labeled F(ab′)2 specific for either Fc or F(ab′)2 (the latter anti-fragment antibody excluded both possible interactions between nuclear “lectins” and glycosidic residues of Fc and staining of glycosidic nuclear antigens by AIAs or anti-Fc specific for the glycosidic part of the immunoglobulin antigen) or fluorescent complex “protein A-biotin-avidin” (PABA-FITC, a highly sensitive nonimmunoglobulin second reagent). Three of four different AIA-FITC preparations tested alone and also “F(ab′)2 anti-Fc” showed reactivities with the nucleoli and the nuclear envelope. This indicates the presence of glycosidic determinants at the sites of reaction. Each of the other fluorescent markers, including AIA/AIA-FITC, reacted with the primary marker only, although they were different in sensitivity.The staining patterns of nuclear actin epitopes differed in certain details if primary marker (monoclonal against polyclonal), second marker (AIA-FITC against PABA-FITC), or nuclear preparation (degree of nuclear flattening by the cover slide and salt condition) were changed. It suggests that type and number of actin epitopes, valence, affinity, and number of anti-actin clones, but also subclass or class specificity of the second marker and accessibility of the nuclear actin determinant(s), were involved. The nuclear actin and myosin epitopes stained most intensively in a “high salt” environment (100 mM PBS, 50 mM/1 KC1; pH 7.2) if compared to “low salt staining.” This indicates local concentrations and/or accessibility of antigenic determinants which were hidden in “low salt” (1.5 mN/1 Na2HPO4, 8mM/1 KH2PO4, 2.7 mM/1KCl, 137 mM/1 KCl, 137 mM/1 NaCl; pH 7.4) conditions.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 87
    ISSN: 0886-1544
    Keywords: dynein ; mitosis ; chromosome movement ; immnunofluorescence observation ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: A monoclonal antibody against sea urchin (Hemicentrotus pulcherrimus) sperm flagellar 21S dynein was characterized and sued to identify and localized cytoplasmic dynein of sea urchin eggs by the methods of immunoblotting and indirect immunofluorescence microscopy. D57, the monoclonal antibody used in this study, was directed to the Aβ polypeptide of 21S dynein. D57 stained sperm flagella specifically but did not inhibit Mg-ATPase activity of 21S dynein, its recombination ability with NaCl-extracted axonemes, or the movement of demembranated sperm. D57 cross-reacted with sea urchin egg cytoplasmic dynein. High molecular weight cytoplasmic dynein polypeptide which had the same electrophoretic mobility s flagellar dynein. A chains was the only polypeptide that reacted with D57 in the crude extract from unfertilized sea urchin eggs. Indirect immunofluorescence observations showed that the mitotic apparatus was stained most intensely in the frozen sections and lysed eggs. In the mitotic apparatus isolated at metaphase, the half spindles were stained more strongly than the astral regions. The regions near chromosomes in the half spindle appeared to be stained particularly. Staining of the interzone was also observed in the mitotic spindle isolated at anaphase. Comparison of the staining patterns for cytoplasmic dynein with that for tubulin suggested that cytoplasmic dynein was localized where microtubules were densely organized, but its distribution may not necessarily be identical with that of microtubules.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 88
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 7 (1987), S. 110-115 
    ISSN: 0886-1544
    Keywords: microtubules ; antitubulin ; particle translocalion ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: Microtubules have been demonstrated to be a substrate for organelle transport and particle translocation in vitro and in vivo. Subsequent to a previous report of inhibition of axonal transport of exogenous tracers in vivo using antiserum NS-20 against tubulin (Johnston et al: Brain Res. 1986), we now show disruption of particle movement in extruded squid axoplnsm using this unique immunological probe. Using video-enhanced contract-differential interference contrast (AVEC-DIC) microscopy, we examined the properties of particle movement along microtubules and demonstrated that bolh the velocity of particle movement and the numbers of particles moving are decreased in the presence of NS-20 antiserum or NS-20 affinity-purified antibodies but. not in the presence of another antiserum against tubulin. The amount of microtubule substrate does not change in the presence of any of the antisera. In conclusion, we suggest that NS-20 antibodies bind near or at a site on the tubulin molecule which is critical in the mechanism of particle transport, and provide a direct immunological probe to examine the mechanism of microtubule involvement in axonal transport.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 89
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 6 (1986) 
    ISSN: 0886-1544
    Keywords: Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 90
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 6 (1986), S. 96-98 
    ISSN: 0886-1544
    Keywords: microtubules ; evolution ; eukaryotes ; phagotrophy ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: Earlier hypotheses of the origin of flagella appear untenable in the light of recent evidence on the ancestry of eukaryotes. It is suggested that microtubules and flagella evolved early in eukaryote evolution to enhance phagotrophy.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 91
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 7 (1987), S. 235-247 
    ISSN: 0886-1544
    Keywords: diethylstilbestrol ; estradiol ; microtubules ; mitotic apparatus ; cytoplasmic microtubule complex ; indirect immunofluorescence ; electron microscopy ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: We tested diethylstilbestrol (DES) and 17 β-estradiol as mitotic arrestants to determine their effects on chromosome distribution, spindle microtubules, and the cytoplasmic microtubule complex (CMTC) in the Chinese hamster strain Don. Cytological experiments assessed micronuclei induction, chromosome displacement, and anaphase recovery Indirect immunofluorescence microscopy with antibody to tubulin and electron microscopy were used to illustrate effects on microtubules. Both DES and estradiol were potent inhibitors of mitosis when applied to cells in vitro. Estradiol induced micronuclei at a greater frequency than did DES. Estradiol-arrested metaphases often contained misaligned chromosomes despite the presence of a bipolar spindle and an equatorial plate. Equatorial plates were not observed in DES-arrested cells. Cells recovered quickly from estradiol exposure upon removal of the steroid. The frequency of abnormal metaphases and abnormal anaphases declined as the recovery period increased. Microtubule experiments showed that DES inhibited spindle assembly and disassembled the CMTC, whereas estradiol, at similar concentrations, arrested mitosis in a manner that allowed spindle assembly. A definite effect on the CMTC by estradiol could not be determined. However, changes in cell morphology were observed. In the presence of estradiol, centrosomes organized microtubules that joined with kinet-ochores of chromosomes at the equatorial plate as well as with those of misaligned chromosomes. Misaligned chromosomes appeared predominantly at polar regions of mitotic cells. Following drug removal, the pole-oriented chromosomes reoriented at the equatorial plate. The unique arresting properties of estradiol may prove useful in studies of chromosome migration and segregation during mitosis.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 92
    ISSN: 0886-1544
    Keywords: cytoplasmic fibril ; birefringence ; microfilament ; contraction-relaxation cycle ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: The contractility of Physarum plasmodium was investigated using cell models that were prepared by treating thin-spread plasmodia with ice-cold 0.2% Triton X-100. Cell models obtained from the anterior regions of the thin-spread plasmodia in the contraction phase retained many birefringent cytoplasmic fibrils. The fibrils vigorously contracted on addition of ATP, inducing simultaneous contraction of the whole cell models. In contrast, cell models prepared from the anterior regions in the relaxation phase scarcely contained the birefringent fibrils and exhibited only weak contractility on addition of ATP. The posterior regions of the thinspread plasmodia, which were composed of ramified plasmodial strands, always retained many fibrils when treated with the Triton solution and showed intensive contraction on addition of ATP.SDS-polyacrylamide gel electrophoresis showed that the model was enriched for actin and myosin. About 40% of the actin was extracted from the plasmodium by the Triton treatment, while scarcely any myosin was extracted.Fragmin, a F-actin-fragmenting factor, caused the birefringent fibrils to diminish in the presence of Ca2+, but more than 30 minutes was required for their complete disappearance. The birefringent fibrils weakened by 30-minute fragmin treatment disappeared immediately on addition of ATP or AMP-PNP.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 93
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 7 (1987), S. 258-271 
    ISSN: 0886-1544
    Keywords: video and fluorescence microscopy ; saltatory particle movements ; cytoskeleton ; microtubules ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: We recorded live, undifferentiated amebae of Dictynstelium discoideum by video microscopy and analyzed the behavior of cytoplasmic particles and granules. Cytoplasmic streaming and saltatory movements are the two major types of particle movements that occur in interphase amebae. Saltatory movements predominated in an area around the nucleus-associated body (NAB) and many were radial toward or away from it, the velocity being very similar in both directions. Some saltations were simple forward movements, and others were complex to-and-fro movements with as many as seven turnabouts. For a given leg of movement the velocity was not uniform along the path. Small particles (〈 1 μm) moved faster (X = 2.8 μm/s) than large (∼ 1 μm; X = 2.1 μm/s) and very large (〉 1 μm; X = 1.4 μm/s) particles, but the smallest particles were visible only in the running image and could not be analyzed. Ultrastructurally, saltating particles are digestive vacuoles and vesicles of various sizes, appearances, and contents, which are numerous particularly in the vicinity of the NAB. Several lines of evidence pointed to a role of microtubules (MTs) in saltatory particle movements. Composites of particle tracks corresponded closely to MT arrays visualized by immunofluorescence. No saltations occurred in mitotic amebae that lack cytoplasmic MTs, but the movements resumed toward the end of division, concurreduced with the rebuilding of the complex of cytoplasmic MTs. Nocodazole reduced and eventually slopped saltatory movements over a period of 3 h, when aberrant MT patterns were the rule. Saltations in slime mold amebae may be an eye-catching feature of intracellular transport functioning in endo- and exocytosis in the shuffling of vesicles containing factors involved in ameboid movement, and in the transduction of external signals to the cell center.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 94
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 7 (1987), S. 291-292 
    ISSN: 0886-1544
    Keywords: Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 95
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 6 (1986) 
    ISSN: 0886-1544
    Keywords: Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 96
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 6 (1986), S. 537-548 
    ISSN: 0886-1544
    Keywords: microtubules ; sea urchins ; kinesin ; mitosis ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: In this report, we describe an in vitro system for analyzing microtubule-based movements in supernatants of sea urchin egg and embryo homogenates. Using video enhanced DIC microscopy, we have observed bidirectional saltatory particle movements on native taxol-stabilized microtubules assembled in low speed supernatants of Lytechinus egg homogenates, and gliding of these microtubules across a glass surface. A high speed supernatant of soluble proteins, depleted of organelles, microtubules, and their associated proteins supports the gliding of exogenous microtubules and translocation of polystyrene beads along these microtubules. The direction of microtubule gliding has been determined directly by observation of the gliding of flagellar axonemes in which the (+) and (-) ends could be distinguished by biased polar growth of microtubules off the ends. Microtubule gliding is toward the (-) end of the microtubule, is ATP sensitive, and inhibited only by high concentrations of vanadate. These characteristics suggest that the transport complex responsible for microtubule gliding in S2 is kinesin-like. The implications of these molecular interactions for mitosis and other motile events are discussed.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 97
    ISSN: 0886-1544
    Keywords: microinjection ; mitosis ; microtubule-associated proteins ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: Microtubule-associated protein 2 (MAP2) derivatized with iodoacetamidotetramethylrhodamine or with iodoacetamidofluorescein binds to microtubules after injection into living interphase cells [Scherson et al, 1984]. The binding of derivatized MAP2 stabilized microtubules in vitro; it was therefore important to check if the binding of MAP2 in vivo perturbed the dynamics and organization of the microtubule network. We have addressed these questions by studying the effect of the injection of derivatized MAP2 on mitosis in PtK 1 cells and on the recovery of the microtubule network from low temperature incubation in interphase cells. We found that the presence of derivatized MAP2 did not change the duration of any mitotic stage and that the injected cell normally completed mitosis. We subsequently showed that the injected MAP2 bound to the microtubules within 5 minutes after injection and remained bound throughout the course of mitosis. The reorganization of the microtubule network upon cooling and rewarming was studied in the cytoplasm of human foreskin fibroblasts (356 cells). During the recovery, the distribution of the fluorescent MAP2 in living cells was identical with the microtubule pattern visualized by immunofluorescence in lysed and fixed cells.In these experiments, the fluorescent MAP2 bound to microtubules can be considered as a nonperturbing reporter of the microtubule network. This result is discussed in terms of the role of MAPs in the dynamics and organization of microtubules in living cells.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 98
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 6 (1986), S. 595-603 
    ISSN: 0886-1544
    Keywords: tissue culture ; Swann cell ; pulsatile movement ; time-lapse cinemicrography ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: Slow pulsatile movements of Schwann cells in vitro were studied quantitatively by using time-lapse cinemicrography. Schwann cells from peripheral nerves of 3-day-old rats were cultured in serum-free medium. Most Schwann cells showed intermittent episodes of pulsatile movement; each episode consisted of one or several contractile pulses. About half of the episodes consisted of a single pulse, and episodes with more than four pulses were rare. The average episode of activity lasted 2.6 min, while the average duration of a single pulse was 1.5 min. The mean quiescent interval between episodes of activity was 3.7 min. Some cells showed no pulsatile activity. Active cells averaged 6.6 episodes/h. The fraction of time which a Schwann cell spent in pulsatile activity varied widely, with an average of 28%. Behavior of Schwann cells in HEPES-buffered Hanks saline was generally similar to that in the complete medium. Raising K+ to 40 mM or Ca++ to 10 mM did not markedly affect the time course of the pulsatile motility, although the contractions were more vigorous in the high Ca++. Pulsatile movement was reversibly inhibited by cytochalasin B and appeared to be potentiated by drugs that disrupt microtubules.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 99
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 6 (1986), S. 628-639 
    ISSN: 0886-1544
    Keywords: monoclonal antibody ; cytokeratins ; desmoplakins ; Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Notes: We describe here antigenic cross-reactivity between the human 40-kilodalton cytokeratin polypeptide [Moll et al] and components of bovine desmosomal plaque, namely desmoplakins I and II. This relationship was revealed by an antibody (KM 4.62), raised against cytoskeletal preparation of cultured human breast adenocarcinoma cells (MCF-7) and selected by immunoblotting and immunofluorescent labeling. In cultured human cells that contain the 40-kD cytokeratin, antibody KM 4.62 labeled arrays of filaments throughout the cytoplasm. This antibody labeled the basal layer of nonkeratinizing squamous epithelia as well as various simple (normal and malignant) epithelia and epithelial elements of the thymus. In liver tissue, labeling was obtained only in bile ducts and canaliculi but not in the hepatocytes.In bovine cells and tissues, on the other hand, immunofluorescent labeling with antibody KM 4.62 was strictly confined to desmosomes. This was verified by double immunolabeling with both antibody KM 4.62 and specific cytokeratin or desmosomal antibodies. Immunoblotting analysis indicated that the former antibody reacts specifically with the high molecular weight components of the bovine desmosomal plaque, namely desmoplakins I and II. These immunochemical results suggest that bovine desmoplakins share same structural relationship with the human acidic, 40-kD cytokeratin.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 100
    Electronic Resource
    Electronic Resource
    New York, NY : Wiley-Blackwell
    Cell Motility and the Cytoskeleton 6 (1986), S. 674-678 
    ISSN: 0886-1544
    Keywords: Life and Medical Sciences ; Cell & Developmental Biology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Medicine
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...