ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory  (183)
  • English  (183)
  • Undetermined
  • Bulgarian
  • 1985-1989  (53)
  • 1980-1984  (130)
  • 1
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-82/23
    In: CRREL Report, 82-23
    Description / Table of Contents: A direct filtration, water treatment pilot plant was operated on the Kenai River at Soldotna, Alaska, during the summer of 1980. The purpose of the pilot plant operations was to determine the feasibility of the direct filtration process for removal of glacial silt. The major criterion used to determine feasibility was production of water containing less than 1.0 NTU of turbidity. For the range of raw water turbidities encountered (22-34 NTU), the pilot plant testing indicated that direct filtration was feasible and could be considered as an alternative to conventional waiter treatment plants containing sedimentation tanks.
    Type of Medium: Series available for loan
    Pages: 26 Seiten , Illustrationen
    Series Statement: CRREL Report 82-23
    Language: English
    Note: CONTENTS Abstract Preface Conversion factors: U.S. customary to metric Introduction Glacial characteristics Water treatment Materials and methods Experimental design Pilot plant intake Hydrocyclone Chemical addition system Flocculation system Filtration system Pilot plant operations Coagulant chemical preparations Flow measurement Sampling Results and discussion Kenai River w ater quality Evaluation of pilot plant testing Performance of pilot plant elements Physical and chem ical variables Conclusions Recommendations Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 2
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/11
    In: CRREL Report, 83-11
    Description / Table of Contents: Investigations of ground radar performance over thawed and seasonally frozen silts, and sands and gravels containing artificial and natural reflectors were carried out in Alaska. The radar emitted 5-10 ns pulses, the center frequency of which was approximately 150 MHz. The artificial reflectors were metal sheets and discs and the natural reflectors were the groundwater table and interfaces between frozen and thawed material. The water table was profiled at three sites where the subsurface material was coarse-grained alluvium. Dielectric constants of 16 to 18 were measured for the thawed silts, 6 to 7 for the frozen silts and 3 to 9 for the sands and gravels. Signal penetration in the thawed high moisture content silts may be achieved only by use of a lower frequency radar, whereas in the sands and gravels greater depths may be detected with more sophisticated signal processing.
    Type of Medium: Series available for loan
    Pages: 16 Seiten , Illustrationen
    Series Statement: CRREL Report 83-11
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 3
    Call number: ZSP-201-83/22
    In: CRREL Report, 83-22
    Description / Table of Contents: A new experimental method for measuring the soil-water diffusivity of frozen soil under isothermal conditions is introduced. The theoretical justification of the method is presented and the feasibility of the method is demonstrated by experiments conducted using marine-deposited clay. The measured values of the soil-water diffusivity are found comparable to reported experimental data.
    Type of Medium: Series available for loan
    Pages: 13 Seiten , Illustrationen
    Series Statement: CRREL Report 83-22
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 4
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/23
    In: CRREL Report, 83-23
    Description / Table of Contents: The problems associated with measuring stresses in ice are reviewed. Theory and laboratory test results are then presented for a stiff cylindrical sensor made of steel that is designed to measure ice stresses in a biaxial stress field. Loading tests on freshwater and saline ice blocks containing the biaxial ice stress sensor indicate that the sensor has a resolution of 20 kPa and an accuracy of better than 15% under a variety of uniaxial and biaxial loading conditions. Principal stress directions can also be determined within 5 degrees. The biaxial ice stress sensor is not significantly affected by variations in the ice elastic modulus, ice creep or differential thermal expansion between the ice and gauge. The sensor also has a low temperature sensitivity (5 kPa/deg C).
    Type of Medium: Series available for loan
    Pages: 38 Seiten , Illustrationen
    Series Statement: CRREL Report 83-23
    Language: English
    Note: CONTENTS Abstract Preface Introduction Previous work Stress measurements Design considerations Stress sensors Biaxial ice stress sensor Biaxial stress sensor theory Gauge deformation Stresses associated with cylindrical sensors Determination of ice stresses Gauge calibration Evaluation of the biaxial ice stress sensor Temperature sensitivity Biaxial loading test equipment Biaxial loading test results Differential thermal expansion Long-term drift Discussion of test results Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 5
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/25
    In: CRREL Report, 83-25
    Description / Table of Contents: Ice action on two cylindrical and conical structures, located side by side, was investigated in a small-scale experimental study to determine the interference on the ice forces generated during ice-structure interaction. The proximity of the two structures changes the mode of ice failure, the magnitude and direction of ice forces on the individual structure, and the dominant frequency of ice force variations. Interference effects were determined by comparing the experimental results of tests at different structure spacings.
    Type of Medium: Series available for loan
    Pages: 42 Seiten , Illustrationen
    Series Statement: CRREL Report 83-25
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Experimental setup and procedure Results and discussion Cylindrical structures Conical structures Conclusions Literature cited Appendix A: Relationship between flexural strength and in-situ unconfined compressive strength Appendix B: Test data
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 6
    Call number: ZSP-201-83/24
    In: CRREL Report, 83-24
    Description / Table of Contents: Secondary recovery of oil at Prudhoe Bay, Alaska, will involve transporting large quantities of seawater in elevated pipelines across tundra for injection into oil-bearing rock strata. The possibility of a pipeline rupture raises questions concerning the effects of seawater on tundra vegetation and soils. To evaluate the relative sensitivities of different plant communities to seawater, eight sites representing the range of vegetation types along the pipeline route were treated with single, saturating applications of seawater during the summer of 1980. Within a month of the treatment 30 of 37 taxa of shrubs and forbs in the experimental plots developed clear symptoms of stress, while none of the 14 graminoid taxa showed apparent adverse affects. Live vascular plant cover was thus reduced by 89 and 91% in the two dry sites and by 54, 74 and 83% in the three moist sites, respectively. Live(green) bryophyte cover was markedly reduced in the moist experimental sites in 1981. Bryophytes in all but one of the wet-site experimental plots were apparently unaffected by the seawater treatment. Two species of foliose lichens treated with seawater showed marked deterioration in 1981. All other lichen taxa were apparently unaffected by the seawater treatment. The absorption and retention of salts by the soil is inversely related to the soil moisture regime. In the wet sites, conductivities approached prespill levels within about 30 days. In such sites, spills at the experimental volumes are quickly diluted and the salts flushed from the soil. In the dry sites, on the other hand, salts are retained in the soil, apparently concentrating at or near the seasonal thaw line.
    Type of Medium: Series available for loan
    Pages: 43 Seiten , Illustrationen
    Series Statement: CRREL Report 83-24
    Language: English
    Note: CONTENTS Abstract Preface Introduction Methods Site selection and preparation Prespill assessment Seawater application Postspill assessment Enzyme assay and analysis of soil flora Results and discussion Soil-solution conductivities Vascular plant response Cryptogam response Site factors and plant response Soil flora and extracellular soil enzymes Limitations of this study Summary and conclusions Literature cited Appendix: Plant taxa included in this study
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 7
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/18
    In: CRREL Report, 84-18
    Description / Table of Contents: This report investigates the influences of turbulence and water temperature on frazil ice formation. The rate and thequantity of frazil ice formed in a specified volume of supercooled water increase with both increasing turbulence inten-sitv and decreasing water temperature. The influence of turbulence intensity on the rate of frazil ice formation, how-ever. is more pronounced for larger initial supercooling. The turbulence characteristics of a flow affect the rate offrazil ice formation by governing the temperature to which the flow can be supercooled, by influencing heat transferfrom the frazil ice to surrounding water, and by promoting collision nucleation, particle and floc rupture and increasingthe number of nucleation sites. larger frazil ice particles formed in water supercooled to lower temperatures. The par-ticles usually were disks, with diameters several orders greater than their thickness. Particle size generally decreased with increasing turbulence intensity. This report develops an analytical model, in which the rate of frazil ice formation isrelated to temperature rise of a turbulent volume of water from the release of latent heat of fusion of liquid water toice. Experiments conducted in a turbulence jar with a heated, vertically oscillating grid served both to guide and tocalibrate thanalytical'model as well as to afford insights into frazil ice formation. The formation of frazil ice wasstudied for Vemperatures of supercooled water ranging from -0.9° to -0.050°C.
    Type of Medium: Series available for loan
    Pages: vi, 50 Seiten , Illustrationen
    Series Statement: CRREL Report 84-18
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Background Scope of study Literature review Introduction Incipient formation of frazil ice Particle size and evolution of frazil ice Influences of turbulence and water temperature on the rate of frazil ice formation Conclusions Analytical model Introduction Elements of heat transfer Elements of turbulence Experimentation Experimental apparatus Experimental procedure Results Introduction Nucleation of frazil ice Influences of turbulence on frazil ice formation Water temperature Influences of water temperature and turbulence on the concentration of frazil ice Frazil ice particle shape and size Conclusions Literature cited Appendix A: Preliminary frazil ice experiments Flume experiments Couette-flow Appendix B: Listing of computer program for calculation of frazil ice formation Appendix C: Water temperature rise attributable to frazil ice formation as computed usingthe analytical model .
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 8
    Call number: ZSP-201-84/16
    In: CRREL Report, 84-16
    Description / Table of Contents: Phase composition curves are presented for a typical saline silt from Lanzhou, P.R.C., and compared to some silts from Alaska. The unfrozen water content of the Chinese silt is much higher than that of the Alaskan silts due to the large amount of soluble salts present in the silts from China, which are not present in silt from interior Alaska. When the salt is removed, the unfrozen water content is then similar for both the Chinese and Alaskan silt. Here we introduce a technique for correcting the unfrozen water content of partially frozen soils due to high salt concentrations. We calculate the equivalent molality of the salts in the unfrozen water at various temperatures from a measurement of the electrical conductivity of the extract from saturated paste.
    Type of Medium: Series available for loan
    Pages: iii, 25 Seiten , Illustrationen
    Series Statement: CRREL Report 84-16
    Language: English
    Note: Contents Abstract Preface Introduction Background Materials Sample preparation Nuclear magnetic resonance Specific surface area Electrical conductivity Results and discussion Summary Literature cited Appendix A: Unfrozen water content vs temperature data for Lanzhou silt
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 9
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/11
    In: CRREL Report, 84-11
    Description / Table of Contents: Data obtained from two sets of data buoys either air-dropped or deployed by ship onto the Weddell Sea pack ice during the period from Dec 1978 to Nov 1980 are presented. The buoy data include position, pressure and temperature information and to date represent the most complete combined weather and pack ice drift records for the ice-covered Southern Ocean regions. The buoys tended to drift north initially and then to turn east generally between latitudes 62°S and 64°S. Buoy 1433 turned east farther south at approximately 67°S but at about the same time as buoy 0527, implying that the westerly wind belt was farther south than usual in 1979. The range of air pressures-from about 950 mb to about 1020 mb is typical of the circumpolar low pressure trough in the Southern Hemisphere. All buoys were equipped with an internal or compartment temperature sensor. The 1980 buoys also contained an external air temperature sensor in a ventilated, shielded can at 1-m height. Although differences of 10°C or more between recorded air and compartment temperatures are common, the correlation between the two measured temperatures is generally very good. The compartment temperatures are higher probably because the buoy is radiationally heated. We found that subtracting 3°C from the average daily compartment temperature yielded a good estimate of the average air temperature for any given day. This technique can be used to construct average daily air temperature records for the 1979 buoys which only contained the internal or compartment temperature sensor.
    Type of Medium: Series available for loan
    Pages: v, 21 Seiten , Illustrationen
    Series Statement: CRREL Report 84-11
    Language: English
    Note: CONTENTS Abstract Preface Introduction Methods and instrumentation Results Drift tracks Pressure data Temperature data Discussion Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 10
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/33
    In: CRREL Report, 84-33
    Description / Table of Contents: A small-scale experimental study was conducted to characterize the magnitude and nature of ice forces during continuous crushing of ice against a rigid, vertical, cylindrical structure. The diameter of the structure was varied from 50 to 500 mm, the relative velocity from 10 to 210 mm/s, and the ice thickness from 50 to 80 mm. The ice tended to fail repetitively, with the frequency of failure termed the characteristic frequency. The characteristic frequency varied linearly with velocity and to a small extent with structure diameter. The size of the damage zone was 10 to 50% of the ice thickness, with an average value of 30%. The maximum and mean normalized ice forces were strongly dependent on the aspect ratio (structure diameter/ice thickness). The forces increased significantly with decreasing aspect ratio, but were constant for large aspect ratios. The maximum normalized forces appeared to be independent of strain rate. The effect of velocity on the normalized ice forces depended on structure diameter. The mean effective pressure or specific energy of ice crushing depended on both aspect ratio and ice-structure relative velocity. The energy required to crush the ice for the one failure cycle was obtained from the ice force records for each test, and was compared to the energy calculated from an idealized sawtooth shape for the force record, the maximum force, velocity and characteristic frequency data. Originator - supplied keywords included: Cold regions, Cold regions construction, Cylindrical test structures, Ice, Ice crushing, Ice forces, and Test facilities.
    Type of Medium: Series available for loan
    Pages: vi, 47 Seiten , Illustrationen
    Series Statement: CRREL Report 84-33
    Language: English
    Note: Contents Abstract Preface Nomenclature Introduction Test objectives Experimental setup and procedures Facilities Test fixture Data acquisiton system Ice sheets Measurement of ice properties Daily test summary Experimental results and discussion Observations Ice force records Frequency of ice force variations Discussion Maximum crushing forces Mean effective pressure or specific energy of ice in crushing Failure energy of ice Ratio of maximum force to mean force Summary and conclusions Literature cited Appendix A: Data for continuous crushing tests
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 11
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-85/3
    In: CRREL Report, 85-3
    Description / Table of Contents: In the past all theoretical analyses for rapidly sheared granular flows assumed that the granular solids are either disks or spheres and are uniform in size. However, natural materials that create these granular flows are in general irregular in shape and have various spectra of sizes. The stress and rate of energy dissipation levels in granular flows are significantly influenced by the size distribution. In part 1 of this report series (AD-A154 045), the formulation of the constitutive equations considering a two-size granular mixture is presented, where the ratio of the two sizes is nearly one. In part 2, the constitutive equations for a two-size mixture are extended to include a general size ratio. In addition, a complete spectrum of size distribution is incorporated, which allows the quantification of the size distribution effect in the most general way. In analyzing the stresses, intergranular collision is assumed to be the major dynamic activity at the microscopic level. Because of the present limited knowledge of testing shape effects, the analysis is confined to the flow of either disks or spheres. The result of this work provides necessary information for a more realistic analysis of natural and industrial granular flow. Keywords: Granular flow, and Particle size distribution.
    Type of Medium: Series available for loan
    Pages: vi, 29 Seiten , Illustrationen
    Series Statement: CRREL Report 85-3
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Constitutive equations for a two-size mixture Limiting case of the two-size mixture Complete spectrum analysis for spheres and disks Conclusion Literature cited Appendix A: Derivation of collision frequency between neighboring spheres that follow the mean shear flow without fluctuations
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 12
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-85/1
    In: CRREL Report, 85-1
    Description / Table of Contents: An expensive drill has been modified to provide researchers with the ability to auger an open hole or to acquire continuous, undisturbed 76-mm-diam core samples of a variety of perennially frozen materials that are suitable for chemical and petrographic analysis. It was developed by field testing in support of research from 1980 to 1983. Operation of the drill is based mainly on using a minimum of power to cut through frozen ground with tungsten carbide cutters on a CRREL coring auger. The ice content, temperature and grain size of the frozen sediments are important variables determining the sampling depth. Perennially frozen sediments with temperatures in the range of -0.5 C to -8.5 C have been continuously cored with this drill. Drilling and sampling are most efficiently conducted when ambient air temperatures are below freezing and the active layer is frozen. The self-contained lightweight drill is readily transportable off-road by helicopter or tracked vehicle, or by towing over roads. It is locally self-mobile by use of a winch. Total cost of the drill and modifications is estimated at approximately $10,000.
    Type of Medium: Series available for loan
    Pages: v, 34 Seiten , Illustrationen
    Series Statement: CRREL Report 85-1
    Language: English
    Note: CONTENTS Abstract Preface Introduction Background on development Drill development and configuration Equipment Modifications Operations Assembly and disassembly Field transport and movement Typical operating procedures Effect of material properties, weather and water Depth and hole completion time Summary Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 13
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/32
    In: CRREL Report, 84-32
    Description / Table of Contents: Orwell Lake, in west-central Minnesota, is a flood-control, water-management reservoir first impounded in 1953. Subsequent erosion of the shoreline and a lack of knowledge of slope erosion processes in this region prompted this study to identify and quantify the processes there. The processes were measured at selected sites between June 1980 and June 1983. Erosion of the banks is primarily caused by three processes: rain, frost thaw, and waves. The first two processes tend to move sediment to the base of the steep slopes, forming 4 relatively gentle surface of accumulation. Wave action then tends to move this sediment into the lake. Analysis of the data collected over three years has confirmed that wave action is the dominant erosion process, providing almost 77% of the erosion during the 1981-82 study year. During the 1981 high pool level, 2,089 Mg of sediment, mostly colluvium, was removed from the lower slopes by wave action striking the 1.62 km of eroding shoreline. More than 4,300 Mg was eroded by waves accompanying the higher pool levels of 1982., During years in which the pool level does not exceed 325.5 m in elevation, the colluvium slope builds up at the expense of the steeper slope. But during successive years with higher pool levels, the resulting thin colluvium is quickly eroded. Erosion of the primary sediment, a compact till, then occurs, forming the S typical nearly vertical banks. In winter the upland surface adjacent to the lake freezes to a depth of between 1 and 2 m, depending on the surface temperature, the mow cover, and the distance from exposed banks. In late winter soil aggregates, released by the sublimation of interstitial ice within the banks, begin to accumulate at the base of the slopes, often veneering snowbanks there. Once thaw begins, slab failure of bank sediment is followed by mudflows and earthflows. Thaw failure at Orwell Lake in the winter of 1981-82 accounted for over 20% of the erosion; in the spring of 1982, 824 Mg was eroded by this process and 746 Mg the following spring. Such slope failure is most intense along north-facing banks and considerably less intense on south-facing banks, where more effective desiccation and sublimation reduce the soil moisture content. Summer rainfall is responsible for the remaining 3% of the total erosion, amounting to 102 Mg in 1981 and 208 Mg in 1982. Because the banks are steep and relatively short, rainwash is infrequent; rainsplash is the most consistent process during the summer, but the infrequent storms during which rainwash occurscause greater total erosion. Erosion by rain has increased in each of the past three summers, largely because of increased precipitation. Infrequent massive slope failures (slumps) have occurred at the east end of the lake where a buried clay rich unit is stratigraphically and topographically positioned to favor such failures. Drought years followed by heavy spring rains probably will result in additional slope failures of this type at the east end. Unless changes are made, the banks at Orwell Lake will continue to recede. Restriction of the pool level to less than 325.5-m elevation is the least expensive solution to the problem.
    Type of Medium: Series available for loan
    Pages: ix, 110 Seiten , Illustrationen
    Series Statement: CRREL Report 84-32
    Language: English
    Note: CONTENTS Abstract Preface Summary Chapter 1. Introduction Location Purpose of study Previous work Chapter 2. Methodology Geology Overland erosion Wave erosion Frost penetration and heave Thaw failure Bank recession Ground water Soil moisture Chapter 3. Results Geology Geotechnical properties Overland erosion Wave erosion Freeze-thaw phenomena Ground water fluctuations Other slope failures Chapter 4. Discussion Overland erosion Wave erosion Thaw failure Universal soil loss equation Chapter 5. Summary and conclusions Techniques Erosion processes at Orwell lake Bank recession Literature cited Appendix A1: Average cumulative change of surface at erosion stations #2-12, 1980-81 Appendix A2: Cumulative net changes at overland erosion stations #1-12, 1980-81 Appendix A3: Cumulative net changes at overland erosion stations #1 -12, 198 1-82 Appendix A4: Cumulative average erosion at overland erosion stations #1-12, 1980-81 Appendix AS: Cumulative average erosion at overland erosion stations #1-12, 1981-82 Appendix A6: Cumulative average erosion at overland erosion stations #1 -1 2A, 1982 Appendix B: Dimensions of erosion sections, Orwell Lake, Minnesota Appendix C: Piezometer installation data, Orwell Lake, Minneso
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 14
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-89/19
    In: CRREL Report, 89-19
    Description / Table of Contents: Recent efforts to improve airborne electromagnetic induction- measurement technology and to downsize the related helicopter-towed antenna assembly from about 7.5 m long to about 3.5 m long for use in airborne measurement of sea ice thickness are discussed, as are the results from arctic field testing. Also outlined are the system noise and drift problems encountered during arctic field evaluation, problems that adversely affected the quality of the sounding data. The sea ice sounding results indicate that it should be possible to determine thickness to within 5% for ice floes with moderate relief but that, because of sounding footprint size and current model algorithm constraints, steepsided pressure ridge keels cannot be well defined. The findings also indicate that routine sea ice thickness profiling from an airborne platform is close at hand with further system improvement, as is the apparent capability to determine the conductivity of the sea ice, from which an assessment of sea ice strength can be made.
    Type of Medium: Series available for loan
    Pages: iii, 54 Seiten , Illustrationen
    Series Statement: CRREL Report 89-19
    Language: English
    Note: CONTENTS Abstract Preface Introduction Pre-field-deployment activities Software development System optimization Improvements of the calibration procedure Real-time processing Small bird design and implementation Other improvements Field activities Snow, ice and seawater data AEM surveys Calibration AEM data processing Post-survey results Processing problem Ground truth data Floe freeboard vs thickness analysis AEM sounding results Concluding remarks Literature cited Appendix A: Blowup of Figure 28
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 15
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-82/14
    In: CRREL Report, 82-14
    Description / Table of Contents: A comparative study was made of design criteria and analytical methods for footings and pile foundations on perma­frost employed in U.S.S.R. Design Code SNiP II-18-76 (1977) and U.S. Army Cold Regions Research and Engineering Laboratory Special Report 80-34 developed in the early 1970's by the U.S. Army Corps of Engineers and published in 1980. The absence of adequate constitutive equations for frozen soils and of rigorous solutions of the boundary prob­lems has made it necessary to incorporate (explicitly or implicitly) various safety factors in the foundation analyses. From the review it is concluded that the principal difference between these practices is in the assessment and application of appropriate values of safety factors, which leads to a substantial discrepancy in the dimensions and cost of footings and pile foundations in permafrost.
    Type of Medium: Series available for loan
    Pages: iv, 20 Seiten , Illustrationen
    Series Statement: CRREL Report 82-14
    Language: English
    Note: CONTENTS Abstract Preface Introduction U.S.S.R. system of standards U.S.S.R. Design Code SNiP 11-18-76 (1977) subsoils and foundations on permafrost General regulations Classification of soils Basic regulations for foundation design Analysis of subsoils and foundations Design of foundations for special soil conditions, and appendices SR 80-34 (1980) design and construction of foundations in areas of deep seasonal frost and permafrost General information Foundation design Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 16
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-82/12
    In: CRREL Report, 82-12
    Description / Table of Contents: From a high-quality set of velocity, temperature, and humidity profiles collected upwind and downwind of a step change in surface roughness, temperature, and moisture, we have calculated upwind and downwind values of the heat fluxes and friction velocity. The surface change is from smooth to rough; upwind, the sensible heat flux is upward and the latent heat flux is zero; downwind, the surface is well-watered so that the latent heat flux is upward while the sensible heat flux is downward. The downwind latent heat flux in this fetch-limited flow obeys NL=0.08 Rx 0.76 where NL is the latent heat Nusselt number and Rx is the fetch Reynolds number, a parameter for characterizing fetch-limited flows. Because this relation is virtually the same as one found to describe the sensible heat and condensate fluxes over arctic leads, we conclude that the Nusselt numbers nondimensionalizing scalar fluxes are the same for a given fetch Reynolds number when boundary conditions are similar.
    Type of Medium: Series available for loan
    Pages: vii, 18 Seiten , Illustrationen
    Series Statement: CRREL Report 82-12
    Language: English
    Note: CONTENTS Abstract Preface List of symbols Introduction Upwind: flux gradient method Downwind: integral method ResulIts Energy budget Latent heat flux Surface stress Downwind humidity profiles Discussion Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 17
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-82/10
    In: CRREL Report, 82-10
    Description / Table of Contents: Dielectric measurements have been performed on silt and sand samples from permafrost areas using Time Domain Reflectometry. The sample temperatures were varied from +25 °C to -25 °C, and volumetric water content was varied between oven-dry and 0.55 gH2O/cm3. The data were processed for frequencies between 0.1 and 5.0 GHz. The results show a constant K' and a low K' for frequencies up to 1 GHz. A frequency dependence seen on the data above 2 GHz is probably the result of unfrozen, adsorbed water. At moisture levels near saturation at all temperatures, these soils have excellent propagation characteristics for ground-probing radar operating below 0.3 GHz. Massive ice should be easily detectable in permafrost within a few degrees of 0 °C.
    Type of Medium: Series available for loan
    Pages: 7 Seiten , Illustrationen
    Series Statement: CRREL Report 82-10
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 18
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-80/8
    In: CRREL Report, 80-8
    Description / Table of Contents: This report presents the results of the tests on the new U.S. Coast Guard 140-ft icebreaker Katmai Bay (WTGB-101) in the level plate ice and brash ice in Whitefish Bay and the St. Marys River. The results indicate that the vessel can penetrate 22 in. of level freshwater ice with 2-3 in. of snow cover. It can also penetrate up to 48 in. of brash ice in a continuous mode and at least 30 in. of plate ice by backing and ramming. The installed bubbler system decreased the required power of the vessel from 10 to 30% in brash ice and 25 to 35% in level ice. The low friction coating appears to be effective in decreasing the friction factor when it remains intact; when it peels off it appears to make conditions worse than plain paint. An average dynamic friction factor of 0.15 could be used over the entire hull for these tests.
    Type of Medium: Series available for loan
    Pages: iv, 28 Seiten , Illustrationen
    Series Statement: CRREL Report 80-8
    Language: English
    Note: CONTENTS Abstract Preface Metric conversion table Introduction Roughness and friction measurements Level plate ice performance Brash ice performance Ramming icebreaking performance Analysis of the data Propulsion efficiency in ice Regression analysis Conclusions and recommendations Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 19
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-80/6
    In: CRREL Report, 80-6
    Description / Table of Contents: Weekly measurements of the thickness of lake, river and fast sea ice made over a period of 10 to 15 years at 66 locations in Canada and Alaska are analyzed, and the portion of the data relating to maximum ice thickness and decay (i.e. the decrease in ice thickness) is examined. Ice thickness curves revealed individual patterns of ice decay, and comparisons between locations disclosed major contrasts in the amount of ice accretion and the times of maximum ice and ice clearance. Although many factors affect the ice decay process, this study investigates in detail the effect of thawing temperatures. Concurrent measurements of the air temperature at each location made it possible to analyze the relationship between accumulated thawing degree-days (ATDD) and ice cover decay. Other factors affecting ice ablation and breakup, such as snow-ice formation, snow cover depth, solar radiation and wind are also discussed.
    Type of Medium: Series available for loan
    Pages: v, 160 Seiten , Illustrationen
    Series Statement: CRREL Report 80-6
    Language: English
    Note: CONTENTS Abstract Preface Introduction Data sources and literature review Canada Alaska Data tabulation Station selection Description of tabulated data Station location and ice measurement site descriptions Review of previous studies on maximum ice in North America Maximum ice thickness maps Date of maximum ice Plotting of the ice decay curves General procedures Categories of water bodies Ice decay at sea ice locations Envelope curves Average curves Snow-ice formation Ice decay at lake ice locations Average curves Regional variations and similarities Ice decay at river ice locations Variations in ice thickness Rapid ice clearance Comparison between Alaskan and Canadian river ice decay curves Incremental extraction of ice decay data for analysis purposes Selection of ice decay intervals Preliminary evaluation of the methodology Further considerations of the methodology Relationships between ice decay and thawing air temperatures Average daily vs maximum daily air temperature 10-day increments vs accumulated values Total years vs year-to-year analysis Evaluation of use of 0°C as a base Final format of the relationship between ice decay and ATDD Evaluation of the final form Possible causes for variations in slope values Decreasing sea ice thickness and thawing air temperatures Factors affecting sea ice decay Relationship between ATDD and sea ice decay Influence of solar radiation and wind on sea ice decay Literature cited Selected bibliography Appendix A. Ice thickness measurements and other related (or associated) observations for stations in Canada and Alaska Appendix B. Maps of least and greatest ice thickness observed at the time of maximum growth, and average date of occurrence Appendix C. Annual ice decay curves for stations in Canada and Alaska
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 20
    Call number: ZSP-201-80/5
    In: CRREL Report, 80-5
    Description / Table of Contents: This research comprised laboratory testing to determine the properties of asphalt-aggregate mixtures containing three grades of asphalt cements, and analyses to project the performance of pavements containing each of the asphalts, in resisting thermally induced distress and traffic-associated distress. From the results it is concluded that only the softest asphalt cement tested (AC 2.5) would perform satisfactorily in a cold climatic zone. The moderately soft (AC 5) and moderately hard (AC 20) asphalt cements showed little susceptibility to thermal cracking in a moderate and a warm climatic zone, respectively. The AC 2.5 and AC 5 asphalts are not recommended for use in warm climates, however, owing to increased susceptibility to rutting under traffic.
    Type of Medium: Series available for loan
    Pages: vi, 55 Seiten , Illustrationen
    Series Statement: CRREL Report 80-5
    Language: English
    Note: CONTENTS Abstract Preface Introduction Research setting Objectives Materials, mixture designs, and tests Materials Mixture design tests Brazil test Resilient modulus test Data analysis Marshall tests Asphalt grade Compactive effort Aggregate type Data analysis Brazil tests Indirect tensile strength Tensile strain Vertical deformation Summary of Brazil test results Data analysis-resilIient modulus. Comparison of mixture susceptibility to temperature cracking General asphalt concrete stiffness Thermal cracking. Influence of asphalt cement properties Summary Comparison of mixture susceptibility to traftic-load-associated distress Stress/strain analysis Fatigue damage analysis Rutting analysis Strength correlations Marshall stability and indirect tensile strength Indirect tensile strength and resilient modulus Summary Summary and conclusions Recapitulation of investigations Summary of results Conclusions Literature cited Appendix A: Asphalt adggregate mixture properties by Marshall method Appendix B: Equations for calculating specimen properties from Brazil tests Appendix C: Calculated displacements, strains and stresses
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 21
    Call number: ZSP-201-80/4
    In: CRREL Report, 80-4
    Description / Table of Contents: The primary objectives of this study were to 1) prepare a map from Landsat imagery of the Upper Susitna River Basin drainage network, lakes, glaciers and snowfields, 2) identify possible faults and lineaments within the upper basin and within a 100-km radius of the proposed Devil Canyon and Watana dam sites as observed on Landsat imagery, and 3) prepare a Landsat-derived map showing the distribution of surficial geologic materials and poorly drained areas. The EROS Digital Image Enhancement System (EDIES) provided computer- enhanced images of Landsat-1 scene 5470-19560. The EDIES false color composite of this scene was used as the base for mapping drainage network, lakes, glaciers and snowfields, six surficial geologic materials units and poorly drained areas. We used some single-band and other color composites of Landsat images during interpretation. All the above maps were prepared by photointerpretation of Landsat images without using computer analysis, aerial photographs, field data, or published reports. These other data sources were used only after the mapping was completed to compare and verify the information interpreted and delineations mapped from the Landsat images. Four Landsat-1 MSS band 7 winter scenes were used in the photomosaic prepared for the lineament mapping. We mapped only those lineaments related to reported regional tectonics, although there were many more lineaments evident on the Landsat photomosaic.
    Type of Medium: Series available for loan
    Pages: iii, 41 Seiten , Illustrationen
    Series Statement: CRREL Report 80-4
    Language: English
    Note: CONTENTS Abstract Preface Summary Objectives Conclusions Introduction Background Previous cooperative investigations Project rationale and coordination Approach Landsat imagery Interpretation techniques Part I. Use of Landsat imagery in mapping the drainage network, lakes, glaciers and snowfields (Lawrence W. Gatto) Objective Methods Results Conclusions Part II. Use of Landsat imagery in mapping and evaluating geologiclineaments and possible faults (Carolyn J. Merry) Objective Geologic structure Methods Results Conclusions Part Ill. Use of Landsat imagery in mapping surficial materials Section A. Landsat mapping (Harlan L. McKim) Objective Methods Results Section B. Field evaluation (Daniel E. Lawson) Objectives Methods Results Discussion Section C. Conclusions (Daniel E. Lawson and Harlan L. McKim) Literature cited Glossary
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 22
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-80/3
    In: (DE-B103)105551, CRREL Report
    Description / Table of Contents: Revegetation techniques were investigated for gravel soils in cold regions. Two gravel soil test sites were established in Hanover, New Hampshire, and Fairbanks, Alaska. During three growing seasons, we studied the applicability and cost effectiveness of various nutrient sources and mulch materials. The nutrient sources included sewage sludge (at 40, 60 and 80 tons/acre) and commercial fertilizer (at 200, 400 and 600 lb/acre). The mulching materials were wood fiber mulch with various types of tackifiers, peat moss, and sewage sludge. The effects of refertilization during the second growing season were also studied. At both sites the use of sewage sludge produced superior results in many respects to the use of fertilizer at the application rates studied. Grasses receiving sludge showed better establishment rates and greater plant cover and growth, and were able to withstand the hot drying conditions encountered during the summer months. Slightly quicker grass establishment was noted at the higher rates of application of each nutrient source in Fairbanks, while grass establishment at all sludge rates was good in Hanover. All fertilizer treatments performed poorly in Hanover. No evidence of winter injury to the grasses was noted in any of the treatments. Supplemental applications of nitrogen fertilizer in Hanover during spring of the second growing season proved highly beneficial. The fertilizer helped maintain grass growth even during dry summer conditions. The mulches were applied at the rate of 2,000 lb/acre. They were found to be important in providing a more nearly optimum environment for seedling establishment. Wood fiber mulch and the commercial Wood Fiber Mulch 2000, generally, were the best performers.
    Type of Medium: Series available for loan
    Pages: vi, 21 Seiten , Illustrationen
    Series Statement: CRREL Report 80-3
    Language: English
    Note: CONTENTS Abstract Preface Introduction Literature review Experimental design Climate Results and discussion Nutrient sources Mulches Soil fertility Cost analysis Summary and conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 23
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-80/2
    In: CRREL Report, 80-2
    Description / Table of Contents: Winter thermal structure and ice conditions in the land-fast ice cover of Lake Champlain were studied in detail for the winters of 1975-76 and 1976-77. The lake was instrumented to a depth of 8.5 m with a string of highly calibrated thermistors attached to an ice mooring system and connected to a data logger at Shelburne Point, Vermont, during the winter of 1975-76 and at Gordon Landing on Grand Isle, Vermont, during 1976-77. This data logger automatically recorded water temperatures from the surface of the lake though snow, ice and water vertical profiles to the bottom of the lake every four hours. Pertinent meteorological parameters are presented for the appropriate measurement sites during the two winter periods, November '75-April '76, and November '76-April '77. Computations were made of freezing degree days (C) for both winters and correlated with ice formation dates. Predictions of ice growth, using the Stefan equation with an empirical coefficient, were correlated with actual ice growth. Documentation was made of the Lake Champlain Transportation Company's first attempt at wintertime navigation by ferry from Gordon Landing, Vermont, to Cumberland Head, New York, in a land fast ice cover during one of the coldest winters of this century.
    Type of Medium: Series available for loan
    Pages: iv, 26 Seiten , Illustrationen
    Series Statement: CRREL Report 80-2
    Language: English
    Note: CONTENTS Abstract Preface Introduction Objectives Climate Site preparation and data collection Instrumentation, measurements and calibration Relocation of measurement site, Fall 1976 Visual observations, ice conditions, and pertinent photography Analysis Air temperature comparisons Degree days of freezing Prediction of ice growth Water and ice temperature Wind Solar radiation Grand Isle ferry operations 1976-77 Conclusions Recommendations Literature cited Appendix A. General observations of ice conditions on Lake Champlain
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 24
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-87/10
    In: CRREL Report, 87-10
    Description / Table of Contents: Uniaxial constant-stress and constant-strain-rate compression tests were conducted on more than 200 remolded, saturated, frozen specimens of Fairbanks silt under various conditions. A series of curves of stress vs strain rate for various temperatures of strain rates ranging from about 6x10-2 to 10-8s-1show a close strength correspondence between the constant-stress and-costant strain-rate tests. All of these "complete" stress vs strain rate curves could not be described by a single power law or exponential equation, indicating that different deformation mechanisms are dominant within different ranges of strainrate Two critical strain rates for distinguishing between the different deformation mechanisms were ob-served to be near 10- 3 and 10-6 s-1 for the medium-dense frozen Fairbanks silt. The former indicates the transition from ductile failure to moderate brittle fracture as strain rate increases, while the latter indicates the transition from dislocation creep to glide creep (by the authors' definition). Based on the change in flow law, two fundamental creeps were classified: short-term creep, which is governed by glide creep, and long-term creep, which is governed by dislocation creep. The failure criterion of frozen silt has a general form of em x tm = Ef, where m depends only on density, and tm is in minutes if m is not 1. The failure strain Ef was not sensitive to temperature and strain rate over a certain range of strain rates, but it was very sensitive to density. Assur's creep model (1980) for ice was used to fit the creep data in this study. It works well for short-term creep but does not fit as well for long-term creep. The rate process theory was applied to the creep data. A very high value of experimental activation energy was obtained for lower stresses, and a very high value of apparent activation energy was observed for higher temperatures. The peak compressive strength was very sensitive to temperature and strain rate but relatively insensitive to density. While the initial tangent modulus is not-sensitive to strain rate, it increases with decreasing temperature and density.
    Type of Medium: Series available for loan
    Pages: vi, 75 Seiten , Illustrationen
    Series Statement: CRREL Report 87-10
    Language: English
    Note: CONTENTS Abstract Preface Introduction Review of previous work Specimen preparation Material Molding Testing procedure and apparatus Test results Definition of strain and stress Definition of creep failure Definition of failure in constant-strain-rate tests Definition of initial yield strength Determination of initial tangent modulus and 50% peak strength modulus Creep behavior General nature of the creep process and the failure mode Minimum creep rate Time to creep failure Relationship between t, and tm Creep failure strain and failure criterion Creep model and prediction of creep strain Strength behavior General stress-strain behavior and failure mode Peak compressive strength Initial yield strength Failure strain Initial yield strain Initial tangent modulus 50% peak strength modulus Correspondence between constant-stress tests and constant-strain-rate tests Conclusions Literature cited Appendix A: Unfrozen water content data Appendix B: Physical properties of samples tested
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 25
    Call number: ZSP-201-87/14
    In: CRREL Report, 87-14
    Description / Table of Contents: During February and March 1980 the physical properties of Weddell Sea pack ice were investigated via core drilling of 66 floes located along the transect of 600 nautical miles from 64°S to 74°S latitude at roughly 40°W longitude. These studies revealed widespread frazil ice in amounts not known to exist in Arctic sea ice of comparable age and thickness. It is estimated from structure studies of 62 of the 66 floes that 54% of the total ice production of the Weddell Sea is generated as frazil. The disposition and exceptional thickness of the frazil show that mechanisms other than surface turbulence effects are involved and imply that the circulation and structure of the water in the upper levels of the Weddell Sea are significantly different from those in the Arctic basin. Salinities of both first-year and multi-year floes are notably higher than those of their Arctic counterparts because summer surface melting is rare or absent in the Weddell Sea; in the Arctic, downward percolating meltwater flushes through the ice and lowers its salinity. Fluorescence was evaluated as a means of revealing biological activity in Weddell Sea pack ice. It proved useful as an index of combined living and dead material in the ice, but measurements failed to establish any consistent relationship between fluorescence and salinity as suggested be earlier work in the Weddell Sea.
    Type of Medium: Series available for loan
    Pages: iv, 80 Seiten , Illustrationen
    Series Statement: CRREL Report 87-14
    Language: English
    Note: CONTENTS Preface Introduction Sea ice structure and classification Logistics and field operations Analytical techniques Crystalline structure Fluorescence Results Salinity Crystalline structure Fluorescence Description of selected floes Conclusions Literature cited Appendix A: Floe descriptions
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 26
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-87/19
    In: CRREL Report, 87-19
    Description / Table of Contents: The approximate heat balance integral method (HBIM) is extended to the case of a medium with variable properties such as snow. The case of linear variation of thermal conductivity was investigated. An alternative heat balance integral method (AHBIM) was developed. Both constant surface temperature and surface heat flux were considered. A comparison was made of the temperature distribution from the HBIM, AHBIM and an analytical method for the case of constant surface temperature. In general, results agree quite well with the analytical method for small values of dimensionless time τ, but the difference becomes more pronounced as τ increases. It was found that the AHBIM with a quadratic temperature profile gave a somewhat better result, especially when the value of the dimensionless distance η is small. For a specific property function of E(η) = eη, closed form solutions were obtained. The results, when compared with those from HBIM, AHBIM and the analytical method were found to agree exceptionally well with the analytical method, especially for large values of τ.
    Type of Medium: Series available for loan
    Pages: iv, 26 Seiten , Illustrationen
    Series Statement: CRREL Report 87-19
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Mathematical analysis Constant surface temperature Constant surface heat flux Comparison with exact solution Alternative method Conclusions and comments Literature cited Appendix A: Derivation of equation 25 Appendix B: Derivations of equations 37 and 40 Appendix C: Derivation of equations 37a and 40
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 27
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-87/20
    In: CRREL Report, 87-20
    Description / Table of Contents: The structure and salinity characteristics of saline ice slabs removed from ice sheets grown in an outdoor pool have been studied and related to the complex relative dielectric permittivity measured with free-space transmission techniques at 4.80 and 9.50 GHz. The saline ice closely simulated arctic sea ice in its structural and salinity characteristics, which were regularly monitored in a number of ice sheets grown during the winters of 1983-84 and 1984-85. In-situ transmission measurements at similar frequencies were also made on the ice sheets themselves using antennas located above and beneath the ice. The slab measurements were made during warming from -29° to -2°C on slabs grown during the winter of 1983-84 (4.75 GHz) and during a warming and cooling cycle over a slightly larger temperature range on slabs grown during the winter of 1984-85 (4.80 and 9.50 GHz).
    Type of Medium: Series available for loan
    Pages: v, 41 Seiten , Illustrationen
    Series Statement: CRREL Report 87-20
    Language: English
    Note: CONTENTS Abstract Preface Part I - Structural properties Introduction Experimental setup Analytical techniques Results and discussion 1983-84 experiments 1984-85 experiments Conclusions and recommendations Part Il - Microwave properties Introduction Measurement techniques Results 1983-84 experiments 1984-85 experiments 1984-85 in-situ experiments Discussion Comparison of data Analytical modeling Summary and conclusions Literature cited Appendix A: Dielectric mixing model of sea ice
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 28
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-87/22
    In: CRREL Report, 87-22
    Description / Table of Contents: This review discusses problems associated with the anomalous temperature-density relations of water. It covers a) onset of convection, b) temperature structure and natural convective heat transfer, and c) laminar forced convective heat transfer in the water/ice system. The onset of convection in a water/ice system was found to dependent on thermal boundary conditions, not a constant value as in the classical fluids that have a monotonic temperature-density relationship. The water/ice system also exhibits a unique temperature distribution in the melt layer immediately after the critical Rayleigh number is exceeded and soon after it establishes a more or less constant temperature region progressively deepening as the melt layer grows. The constant temperature is approximately 3.2°C for water layers formed from above but varies for melt layers from below. The heat flux across the water/ice interface was found to be a weak power function and to increase linearly with temperature for melted layers from above and below, respectively.
    Type of Medium: Series available for loan
    Pages: vi, 43 Seiten , Illustrationen
    Series Statement: CRREL Report 87-22
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Analytical studies on the onset of convection in a horizontal water layer Experimental studies on the onset of convection in a circular horizontal melt layer Temperature structure and heat transfer In a horizontal layer In a circular horizontal melt layer pHeat transfer studies in nonplanar geometries Forced convective heat transfer over a melting surface Discussion and conclusions Onset of convection Temperature structure and natural convective heat transfer Laminar forced convective heat transfer Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 29
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-80/31
    In: CRREL Report, 80-31
    Description / Table of Contents: Ice accretion on structures built on the earth’s surface is discussed. Sources of water are the atmosphere or water bodies near or surrounding the structure. Ice types include frost, rime, glaze, and spray; properties and conditions governing their formation are presented. Methods of estimating accretion rates and total accretion on structures are given, and extracts from U.S. and Canadian codes for ice and wind loads on structures are included. Techniques for preventing or removing ice accretion are presented.
    Type of Medium: Series available for loan
    Pages: iv, 18 Seiten , Illustrationen
    Series Statement: CRREL Report 80-31
    Language: English
    Note: CONTENTS Abstract Preface 1. Types of ice accretion a. Frost b. Rime c. Glaze d. Spray ice 2. Conditions governing type of accreted ice a. Meteorological b. Structural 3. Accretion rates a. Fundamentals b. Effect of height c. Geographical distribution 4. Spray icing 5. Structural design factors a. Dead loads b. Wind field in the boundary layer c. Windloads 6. Techniques for minimizing structural icing 7. Data collection needs 8. Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 30
    Call number: ZSP-201-82/26
    In: CRREL Report, 82-26
    Description / Table of Contents: The Caribou-Poker Creeks Research Watershed is a small (101.5-sq km) drainage basin located 48 km northwest of Fairbanks, Alaska. Elevations within the watershed range from 210 to 826 m, and approximately 28% of its area is underlain by permafrost. Climatic differences between the watershed and Fairbanks are primarily due to the higher elevation of the watershed. Generally the watershed climatic sites are warmer in winter and cooler in summer than Fairbanks. Within the watershed the greatest temperature contrasts exist in winter, when the valley-bottom sites are beneath the regional air temperature inversion, and the higher sites are above it. From May through September the total precipitation averages 270 mm, 1.47 times that received at Fairbanks. The annual precipitation is about 1.7 times that of Fairbanks. The historical precipitation record at Fairbanks indicates that summer precipitation was below the long-term normal in eight of the eleven years of watershed measurements (1969-1980); no climatic extremes occurred during this period. An analysis of annual streamflow data showed an inconsistency of baseflow recessions from year to year. The runoff-rainfall ratio for individual summer storms averaged 0.35 for Caribou Creek. Comparisons of spot discharge measurements of predominantly permafrost and non-permafrost subwatersheds showed that permafrost-dominated watersheds have a much flashier response to precipitation than non-permafrost watersheds. A comparison of the annual flow distribution of the watershed indicated that Caribou Creek has lower summer and higher winter discharges per unit area than the Chena or Salcha Rivers.
    Type of Medium: Series available for loan
    Pages: 42 Seiten , Illustrationen
    Series Statement: CRREL Report 82-26
    Language: English
    Note: CONTENTS Abstract Preface Introduction Setting Geology and soils Vegetation Climate Air temperature Precipitation Hydrology Annual and monthly runoff Individual storms Baseflow recessions Spatial flow variability Temporal flow variability Summary and conclusions Literature cited Appendix A: Station histories
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 31
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-82/27
    In: CRREL Report, 82-27
    Description / Table of Contents: Recommendations for economical thicknesses for building insulation result from a study of fuel and construction costs of 12 military installations in Alaska. A comparison between the insulation thickness that a building owner might choose today and what he might choose in 20 years indicates a trend for much thicker insulation in the future. An analysis of how much more expensive a building built today with the thickness that would be appropriate 20 years hence indicates only a small penalty in life-cycle costs for the additional insulation. Therefore, a minimum of R-32 walls and R-62 attics is recommended for most of Alaska.
    Type of Medium: Series available for loan
    Pages: 54 Seiten , Illustrationen
    Series Statement: CRREL Report 82-27
    Language: English
    Note: CONTENTS Abstract Preface Conversion factors Summary Introduction Determining economic thicknesses for insulation Background Analysis method for new construction Analysis method for reinsulating existing construction Sensitivity and longevity of the results Sensitivity Longevity Recommendations Saving money vs. saving energy Energy economics conservation Building energy performance standards Conclusion Literature cited Appendix A: Heating system costs Appendix B: Present worth factors Appendix C: Base case and incremental thermal properties Appendix D: LCC comparison graphs for wall and roof systems Appendix E: Cost penalties for energy conservatism Appendix F: Graphic aid for figuring energy savings thermal improvements
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 32
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-82/36
    In: CRREL Report, 82-36
    Description / Table of Contents: Camp construction and drilling activities in 1950 at the East Oumalik drill site in northern Alaska caused extensive degradation of ice-rich, perennially frozen silt and irreversible modification of the upland terrain. In a study of the long-term degradational effects at this site, the near-surface geology was defined by drilling and coring 76 holes (maximum depth of 34 m) in disturbed and undisturbed areas and by laboratory analyses of these cores. Terrain disturbances, including bulldozed roads and excavations, camp structures and off-road vehicle trails, were found to have severely disrupted the site's thermal regime. This led to a thickening of the active layer, melting of the ground ice, thaw subsidence and thaw consolidation of the sediments. Slumps, sediment gravity flows and collapse of materials on slopes bounding thaw depressions expanded the degradation laterally, with thermal and hydraulic erosion removing materials as the depressions widened and deepened with time. Degradational processes became less active after thawed sediments thickened sufficiently to slow the increase in the depth of thaw and permit slope stabilization. The site's terrain is now irregular and hummocky with numerous depressions. Seasonal thaw depths are deeper in disturbed areas than in undisturbed areas and reflect the new moisture conditions and morphology. The severity of disturbance is much greater at East Oumalik than at another old drill site, Fish Creek. The difference results primarily from differences in the physical properties of the sediments, including the quantity and distribution of ground ice.
    Type of Medium: Series available for loan
    Pages: 42 Seiten , Illustrationen
    Series Statement: CRREL Report 82-36
    Language: English
    Note: CONTENTS Abstract Preface Summary Introduction Methodology Geologic setting Camp construction and occupation Types of disturbance Degradational processes and the effective area of impact Areal effects of disturbance Topography Groundwater, surface water and drainage Sediment properties and near-surface stratigraphy Surficial processes Depth of thaw Comparison to Fish Creek Discussion and conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 33
    Call number: ZSP-201-82/39
    In: CRREL Report, 82-39
    Description / Table of Contents: Observations of a 4.4-m-high brine step in the McMurdo Ice Shelf, Antarctica, show that it has migrated about 1.2 km in 4 years. The present brine wave is overriding an older brine-soaked layer. This migration is proof of the dynamic nature of the step, which is the leading edge of a brine wave that originated at the shelf edge after a major break-out of the McMurdo Ice Shelf. The inland boundary of brine penetration is characterized by a series of descending steps that are believed to represent terminal positions of separate intrusions of brine of similar origin. The inland boundary of brine percolation is probably controlled largely by the depth at which brine encounters the firn/ ice transition (43 m). However, this boundary is not fixed by permeability considerations alone, since measurable movement of brine is still occurring at the inland boundary. Freeze-fractionation of the seawater as it migrates throught the ice shelf preferentially precipitates virtually all sodium sulfate, and concomitant removal of water by freezing in the pore spaces of the infiltrated firm produces residual brines approximately six times more concentrated than the original seawater.
    Type of Medium: Series available for loan
    Pages: v, 35 Seiten , Illustrationen
    Series Statement: CRREL Report 82-39
    Language: English
    Note: CONTENTS Abstract Preface Introduction Objectives Analytical techniques Radio echo profiling Core drilling Results and discussion Brine infiltration survey Brine layer steps Brine infiltration characteristics Brine infiltration mechanisms at inland boundary Confirmation of brine depths by drilling Density and temperature profiles Ice shelf freeboard Brine upwelling Brine chemistry Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 34
    Call number: ZSP-201-83/21
    In: CRREL Report, 83-21
    Description / Table of Contents: The probability density function of the gouge depths into the sediment is represented by a simple negative exponential over four decades of gouge frequency. The exceedance probability function is, therefore, e to the -lambda d, where d is the gouge depth in meters and lambda is a constant. The value of lambda shows a general decrease with increasing water depth, from 9/m in shallow water to less than 3/m in water 30 to 35 m deep. The deepest gouge observed was 3.6 m, from a sample of 20,354 gouges that have depths greater than or equal to 0.2 m. The dominant gouge orientations are usually unimodal and reasonably clustered, with the most frequent alignments roughly parallel to the general trend to the coastline. The value of N(bar) sub 1, the mean number of gouges (deeper than 0.2 m) per kilometer measured normal to the trend of the gouges, varies from 0.2 for protected lagoons to 80 in water between 20 and 38 m deep in unprotected offshore regions. The distribution of the spacings between gouges as measured along a sampling track is a negative exponential. The form of the frequency distribution of N sub 1 varies with water depth and is exponential for lagoons and shallow offshore areas, previously skewed for 10 to 20 m depths off the barrier islands, and near-normal for deeper water. As a Poisson distribution gives a reasonable fit to the N sub 1 distributions for all water depths, it is suggested that gouging can be taken as approximating a Poisson process in both space and time. The distributions of the largest values per kilometer of gouge depths, gouge widths, and the heights of the lateral embankment of sediments plowed from the gouges are also investigated.
    Type of Medium: Series available for loan
    Pages: 40 Seiten , Illustrationen, 1 Karte
    Series Statement: CRREL Report 83-21
    Language: English
    Note: CONTENTS Abstract Preface Introduction Background and environmental setting Data collection and terminology Data analysis Gouge depths Gouge orientation Gouge frequency Extreme value analysis Applications to offshore design Gouge depth Extreme value statistics Burial depths Conclusion Literature cited Appendix A: Detailed bathymetric map of the Alaskan portion of the Beaufort Sea
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 35
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/19
    In: CRREL Report, 83-19
    Description / Table of Contents: Small-scale laboratory experiments were conducted on model bridge piers in the CRREL test basin. The experiments were performed by pushing model ice sheets against structures and monitoring the ice forces during the ice/structure interaction. The parameters, varied during the test program, were the geometry of the bridge piers and the velocity, thickness, and flexural strength of the ice. The results are presented in the form of ice forces on sloping and vertical structures with different geometries. During ice action on sloping structures, a phenomenon of transition of failure mode from bending to crushing was observed as the ice velocity was steadily increased.
    Type of Medium: Series available for loan
    Pages: 17 Seiten , Illustrationen
    Series Statement: CRREL Report 83-19
    Language: English
    Note: CONTENTS Abstract Preface Introduction Tests Results Ice forces on inclined structures Transition of ice action due to velocity increase Aspect ratio Bridge pier nose geometry Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 36
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/18
    In: CRREL Report, 83-18
    Description / Table of Contents: An evaluation of an impulse radar system for detecting cavities under concrete pavement is discussed, and field results are presented. It was found that a dual antenna mode of surveying was ideal for void detection. In this mode one antenna operated in a transceive mode and a second, offset from the first, operated in a receive-only mode. This arrangement allowed a refraction-type profile survey to be performed, which enabled subpavement voids to be easily detected. Field trails were held at Plattsburgh Air Force Base, where 28 cavities were detected and mapped. Drilling of holes verified that a cavity existed and allowed cavity depth to be measured. The cavities varied from 1.5 in. to 23 in, depth and were up to 20 ft. long.
    Type of Medium: Series available for loan
    Pages: 49 Seiten , Illustrationen
    Series Statement: CRREL Report 83-18
    Language: English
    Note: CONTENTS Abstract Preface Introduction Plattsburgh Air Force Base Radar sounding system Survey procedure Cavity inspection Radar cavity detection test Radar profile results Falling-weight deflectometer tests Discussion and conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 37
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/24
    In: CRREL Report, 84-24
    Description / Table of Contents: This report describes the growth characteristics and crystalline textures of urea ice sheets which are now used extensively in the Cold Regions Research and Engineering Lab. (CRREL) test basin for modeling sea ice. The aims of the report are to describe the different kinds of crystalline texture encountered in urea ice sheets and to show that even small variations in texture can drastically influence the mechanical behavior of urea ice sheets. Standard petrographic techniques for studying microstructure in thin sections were used on 24 urea ice sheets. These investigations entailed observations of the crystalline texture of the ice (including details of the subgrain structure), grain size measurements, and studies of the nature and extent of urea entrapment and drainage patterns in the ice. Increased knowledge of the factors controlling the crystalline characteristics of urea ice sheets has progressed to the point where test basin researchers at CRREL are now able to fabricate ice sheets with prescribed structures leading to predictable mechanical properties. Originators supplied keywords include: Sea ice, and Mechanical properties.
    Type of Medium: Series available for loan
    Pages: iv, 55 Seiten , Illustrationen
    Series Statement: CRREL Report 84-24
    Language: English
    Note: Contents: Abstract Preface Introduction Objectives Analytical techniques Procedures for growing urea ice sheets Analysis of the crystalline structure of urea ice Characteristics of urea ice Results and discussion Ice sheet no. 1 Ice sheet no. 2 Ice sheet no. 3 Ice sheet no. 4 Ice sheet no. 5 Ice sheet no. 6 Ice sheet no. 7 Ice sheet no. 8 Ice sheet no. 9 Ice sheet no. 10 Ice sheet no. 11 Ice sheet no. 12 Ice sheet no. 13 Ice sheet no. 14 Ice sheet no. 15 Ice sheet no. 16 Ice sheet no. 17 Ice sheet no. 18 Ice sheet no. 19 Ice sheet no. 20 Ice sheet no. 21 Ice sheet no. 22 Ice sheet no. 23 Ice sheet no. 24 Urea concentrations in test tank solution and ice Discussion and conclusions E/σf ratio Thickness of incubation layer Crystal properties Literature cited Appendix A: Thin sections of urea ice sheets
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 38
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-85/9
    In: CRREL Report, 85-9
    Description / Table of Contents: Large temperature gradients applied to a snow cover drive water vapor upwards and result in rapid recrystallization of snow crystals. The same temperature gradients create gradients of air density that can cause flows of air through the snow cover. The formalism necessary to describe these flows I developed heroin an effort to include the convection of vapor in the understanding of snow metamorphism. The theory of convection through porous media is extended here to include the transport of water vapor, which is important because of its latent heat. Results are presented in terms of a Lewis number, defined as the ratio of thermal to mass diffusivities. For Lewis numbers greater than 1.0 phase change intensifies convection, and for Lewis numbers less than 1.0 phase change retards convection. Two boundary conditions of special interest in the study of snow, a constant heat flux bottom and a permeable top are investigated. Their influence on the transfer of heat is quantified, and it is found that heat transfer can be described as a linear function of the driving force for convection. Convection in sloped layers is quantified, and explained in a physically consistent manner. The effect of a permeable top on convection at low Rayleigh numbers is derived. Experiments are performed to measure the effects of convection on heat transfer through glass beads and snow. The model results using constant flux boundary conditions are confirmed by the experiments. Experiments show that convection can occur in snow, and that convection behaves in a manner consistent with our theoretical understanding of the phenomenon. Some uncertainty exists about the permeability and thermal conductivity of snow and hence it is uncertain if thermal convection would occur for a given temperature gradient, density and thickness. Also, for a given convective intensity, there is much uncertainty about how much the rate of snow metamorphism is increased.
    Type of Medium: Series available for loan
    Pages: vi, 70 Seiten , Illustrationen
    Series Statement: CRREL Report 85-9
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Snow metamorphism Mass transfer by diffusion in snow Heat transfer Background-porous media Structure of thermal convection Rayleigh number Onset problem Heat transfer attributable to thermal convection Layering and slope effects Studies of convection through snow Modeling Equation of motion Energy equation Finite difference methods Numerical solution Verification of the model Modeling results Effects of constant flux and permeable boundaries on convection in horizontal layers Effects of phase change on convection Convection in sloped layers Experiments Introduction Experimental apparatus Experimental results and discussion Glass beads Snow Applications and conclusions Onset of Benard convection in seasonal snow covers Applications to snow metamorphism Summary Recommendations Literature cited Appendix A: Derivation of fmite difference formulae Appendix B: Computer programs Appendix C: Sample calculations
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 39
    Call number: ZSP-201-86/11
    In: CRREL Report, 86-11
    Description / Table of Contents: This initial study of the ice-covered Tanana River, near Fairbanks, Alaska, attempted to 1) establish field methods for systematic and repetitive quantitative analyses of an ice-covered river's regime, 2) evaluate the instruments and equipment for sampling, and 3) obtain the initial data of a long-term study of ice cover effects on the morphology, hydraulics and sediment transport of a braided river. A methodology was established, and detailed measurements and samplings, including profiling by geophysical techniques, were conducted along cross sections of the river. A small, portable rotary drill rig equipped with a 356-mm (14-in.) ice auger was used to cut large diameter holes in the ice cover for through-the-ice measurements. Portable heat sources and a heated shelter were required to continuously thaw and dry equipment for the repetitive measurements. Measurements included ice cover thickness, water level, water depth, temperature, flow velocity, suspended load and bed load, frazil ice distribution and bed material composition. Remotely gathered data included apparent resistivity and subsurface radar profiling. The various techniques, sampling gear and problems encountered during use in the subfreezing cold are described in detail in this report.
    Type of Medium: Series available for loan
    Pages: v, 49 Seiten , Illustrationen
    Series Statement: CRREL Report 86-11
    Language: English
    Note: CONTENTS Abstract Preface Introduction Study objectives and field locale Study site Equipment Vehicles Drilling equipment Sampling equipment Geophysical equipment Shelter and icing control Surveying equipment Miscellaneous equipment Field techniques and methodology Logistics Drilling procedures Data collection Geophysical analyses Experiences summary Morphology, transport and hydraulic data Mid-winter physical characteristics Hydraulic characteristics Sediment transport Late winter physical characteristics Seasonal morphology Geophysical data interpretation Spatial morphology Frazil ice characteristics Discussion and conclusions Recommendations Equipment Research Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 40
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-85/10
    In: CRREL Report, 85-10
    Description / Table of Contents: Various methods of generating synthetic seismograms are reviewed and examples of recent applicatiors of the methods are cited. Body waves, surface waves, and normal modes are considered. The analytical methods reviewed include geometric ray theory, generalized ray theory (Cagniard-de Hoop method), asymptotic ray theory, reflectivity method, fullwave theory, and hybrid methods combining ray theory and mode theory. Two numerical methods, those of finite differences and finite elements, and a hybrid method combining finite differences with asymptotic ray theory are described Limitations on the application or validity of the various methods are stated.
    Type of Medium: Series available for loan
    Pages: v, 48 Seiten , Illustrationen
    Series Statement: CRREL Report 85-10
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Section 1. Introduction Section 2. Wave propagation in the earth Section 3. Body waves: ray theory and wave theory Geometric ray theory Wave theory Section 4. Surface waves Section 5. Normal modes Section 6. Finite-difference method Section 7. Finite-element method Section 8. Hybrid methods Section 9. Conclusion Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 41
    Call number: ZSP-201-85/16
    In: CRREL Report, 85-16
    Description / Table of Contents: This report presents the results of the second phase of a test program designed to obtain a comprehensive understanding of the mechanical properties of multi-year sea ice from the Alaskan Beaufort Sea. In Phase 2, 62 constant-strain-rate uniaxial compression tests were performed on horizontal and vertical ice samples from multi-year pressure ridges to examine the effect of sample orientation on ice strength. Also conducted were 36 constant-strain-rate tension tests, 55 conventional triaxial tests and 35 constant-load compression tests on multi-year pressure ridge samples to provide data for developing ice yield criteria and constitutive laws. Data are presented on the strength, failure strain and modulus of multi-year sea ice under different loading conditions. The effects of ice temperature, porosity, structure, strain rate, confining pressure and sample orientation on the mechanical properties of multi-year sea ice are examined.
    Type of Medium: Series available for loan
    Pages: vi, 89 Seiten , Illustrationen
    Series Statement: CRREL Report 85-16
    Language: English
    Note: CONTENTS Abstract Preface Introduction Field sampling program Site selection and description Coring procedures Core logging procedures Shipping and storage of ice samples Ice description Salinity and density Structure Constant-strain-rate compression tests Test variables Uniaxial compressive strength Strength and structure Strength and porosity Residual compressive strength Failure strain Initial tangent modulus Constant-strain-rate uniaxial tension tests Test variables Uniaxial tensile strength Failure strains Initial tangent modulus Constant-strain-rate triaxial tests Equipment Test variables Synthane end caps Triaxial strength Failure strains Initial tangent modulus Effect of sinthane end caps on results Constant-load compression tests Test variables Test results Conclusions Literature cited Appendix A: Ice structure profile of ridge C core Appendix H: Test data Appendix C: Static determination of Young's modulus in sea ice
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 42
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-85/17
    In: CRREL Report, 85-17
    Description / Table of Contents: This report presents the results of tests of the ice friction coefficient carried out during the May 1984 expedition of the F.S. Polarstern off the coast of Labrador. The test surfaces were Inerta-160-coated steel plates and bare steel plates, hand roughened and sandblasted. The main findings of the studies were: 1) columnar and granularpea ice showed no significant differences in friction coefficient; 2) for columnar ice was independent of ice crystal orientation with respect to test surface; 3) was Independent of normal pressure applied on ice sample; 4) initially decreased with increasing relative velocity between the Ice sample and the test surface and reached a steady value at higher speeds; 5) Uk increased with increasing surface roughness; 6) a wetting surface exhibited a higher friction coefficient than a non-wetting surface of the same or even higher roughness average.
    Type of Medium: Series available for loan
    Pages: iv, 26 Seiten , Illustrationen
    Series Statement: CRREL Report 85-17
    Language: English
    Note: CONTENTS Abstract Preface Introduction Test procedure Test apparatus Test surfaces Ice samples Test program Results and discussion Effect of wear of ice sample Effect of normal pressure Effect of velocity, crystal orientation and surface conditions Results summary Comparison with laboratory study Recommendations on test apparatus Literature cited Appendix A : Test results
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 43
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-85/18
    In: CRREL Report, 85-18
    Description / Table of Contents: Concern over the environmental fate of explosives has brought about the development of sensitive analytical methods for measuring them in groundwater. In turn this concern has been extended to validating the sampling procedures for groundwater. This report addresses the potential effects of residual drilling muds on the analysis for explosive contaminants (TNT, DNT, RDX, and HMX) in monitoring wells. The approach was to determine sorption isotherms for each contaminant. Sorption appeared to be independent of solids concentration. Linear isotherms were obtained for RDX and HMX over a range of analytic concentrations; therefore, a single constant can be used to estimate the amount sorbed when the solution concentration is known. Isotherms for TNT and DNT were not linear, however. Scatchard analysis suggested that the isotherms for these analytes could be resolved into two predominant components: a linear component above a certain sorbed quantity and a Langmuir-type component below this quantity. The experimental data were fitted by regression analysis using the appropriate model. The equations developed can be used to predict the sorbed fraction (analytical bias) for any combination of solids and analyte concentration. The amounts of bentonite found in some existing wells do not appear to be sufficient to cause significant bias in analyses for these explosive contaminants.
    Type of Medium: Series available for loan
    Pages: iv, 40 Seiten , Illustrationen
    Series Statement: CRREL Report 85-18
    Language: English
    Note: CONTENTS Abstract Preface Introduction Materials and methods Bentonite and water samples Sorbate solutions Sorption isotherms HPLC analysis Analyte standards Water solubilities Octanol-water partition coefficients Sorption isotherms Freundlich Langmuir BET Scatchard Gibbs Linear Polynomial Results and discussion TNT DNT RDX and HMX Effect of drilling muds on analysis SEM and EDXA analysis of bentonite wells Other studies Summary Literature cited Appendix A : Results for TNT Appendix B: Results for DNT Appendix C: Results for RDX Appendix D : Results for HMX Appendix E: Characteristics of Quik-Gel, Aqua-Gel and well water
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 44
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/8
    In: CRREL Report, 83-8
    Description / Table of Contents: In the course of model tests with urea-doped ice in the CRREL Ice Engineering Facility test basin, the growth process and the physical and mechanical properties of the model ice were investigated. The parameters which were varied were: urea concentration in the tank water, air temperature during growth, growth duration, and tempering time. Uniformity of ice thickness and ice mechanical properties over the whole tank area were found to be satisfactory. The structure of the urea-doped ice was found to be similar to that of the ice except for a relatively thick incubation layer over a dendritic bottom layer. Empirical relationships were established between: ice thickness and negative degree-hours; mechanical properties and growth temperature, urea concentration, and ice thickness; and reduction in mechanical properties and tempting time. The results of the study are presented in charts which permit reliable scheduling of model tests with required ice thickness and ice flexural strength.
    Type of Medium: Series available for loan
    Pages: vii, 53 Seiten , Illustrationen
    Series Statement: CRREL Report 83-8
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Experimental facility and procedures Ice test basin Ice growth procedure Measurements Ice growth and structure Ice thickness distribution Ice growth during freeze-up Ice growth during warm-up Structure of urea-doped ice Mechanical properties of urea-doped ice Introductory remarks Model of a two-layer elastic material Properties of urea-doped ice during freeze-up Properties of urea-doped ice during warm-up Applications to test program scheduling Summary and conclusions Literature cited Appendix A: Results of ice thickness measurements for various growth conditions Appendix B: Properties of untempered ice Appendix C: Properties of tempered ice
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 45
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-88/13
    In: CRREL Report, 88-13
    Description / Table of Contents: In many sea ice engineering problems the ice sheet has been assumed to be a homogeneous plate whose mechanical properties are estimated from the bulk salinity and average temperature of the ice sheet. Typically no regard has been given to the vertical variation of ice properties in the ice sheet or to the time of ice formation. This paper first reviews some of the mechanical properties of sea ice, including the ice tensile, flexural and shear strengths, as well as the ice modulus. Equations for these properties are given as functions of the ice brine volume, which can be determined from the ice salinity and temperature. Next a numerical, finite difference model is developed to predict the salinity and temperature profiles of a growing ice sheet. In this model ice temperatures are calculated by performing an energy balance of the heat fluxes at the ice surface. The conductive heat flux is used to calculate the rate of ice growth and ice thickness by applying the Stefan ice growth equation. Ice salinities are determined by considering the amount of initial salt entrapment at the ice/water interface and the subsequent brine drainage due to brine expulsion and gravity drainage. Ice salinity and temperature profiles are generated using climatological data for the Central Arctic basin. The predicted salinity and temperature profiles are combined with the mechanical property data to provide mechanical property profiles for first-year sea ice of different thicknesses, grown at different times of the winter. The predicted profiles give composite plate properties that are significantly different from bulk properties obtained by assuming homogeneous plates. In addition the failure strength profiles give maximum strength in the interior of the sheet as contrasted with the usual assumption of maximum strength at the cold, upper ice surface. Surprisingly the mechanical property profiles are only a function of the ice thickness, independent of the time of ice formation.
    Type of Medium: Series available for loan
    Pages: v, 63 Seiten , Illustrationen
    Series Statement: CRREL Report 88-13
    Language: English
    Note: CONTENTS Abstract Preface Introduction Structure Composition Mechanical properties Strength Elastic constants The temperature-salinity model Temperature profiles Salinity profiles Composite plate properties Results Conclusions Literature cited Appendix A: Details of the equations for ice surface temperature and conductive heat flux Appendix B: Calculated profile and bulk properties of an ice sheet of varying thickness Appendix C: Calculated profile and bulk properties of 30- and 91-cm-thick ice sheets
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 46
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-82/13
    In: CRREL Report, 82-13
    Description / Table of Contents: Frost heave is analyzed for the common case in which some ice penetrates the soil. In this situation, heave is due to the accumulation of soil-free ice just within the frozen zone, behind a frozen fringe of finite thickness. Heat and mass transport within and across that fringe are crucial processes in the dynamics of heave. This analysis concentrates on activity within the fringe, also connecting that activity to heat and mass flows in the more frozen and unfrozen zones. Each component in a set of governing differential equations is developed from rational physics and thermodynamics, using previous experimental work. It is assumed that the soil ice grows through interconnected interstices; hence it constitutes and can move as a rigid body. When the assumption is translated into mathematical terms, it completes the governing equations. The model resulting from these considerations is a one-dimensional finite element computer program that solves the equations for arbitrary initial and boundary conditions. The model is used to simulate the heave history of a hypothetical soil column frozen unidirectionally and subjected to a surcharge. The results are gratifying in that they predict qualitatively the characteristics of numerous laboratory observations. Some questions about the completeness of the theory remain, and strict verification of the model awaits further experimentation and better parameter identification.
    Type of Medium: Series available for loan
    Pages: iii, 11 Seiten , Illustrationen
    Series Statement: CRREL Report 82-13
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 47
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/4
    In: CRREL Report, 84-4
    Description / Table of Contents: Ice problems developed in the Sault Ste. Marie, Michigan, portion of the St. Marys River because of winter navigation. Passing ships and natural influences moved ice from Soo Harbor into Little Rapids Cut in sufficient quantities to jam, cause high water in the harbor, and prevent further ship passage. After physical model and engineering studies, two ice booms with a total span of 1375 ft (419 m) with a 250-ft (76-m) navigation opening between were installed at the head of Little Rapids Cut in 1975. A modest field study program on the booms was conducted for the ensuring four winters to determine ice and boom interaction and the effects of ship passages on the system. Forces on some anchors were recorded and supplemental data were taken by local personnel. Several reports have been written about the booms' early operations. This paper presents four-year summary of the main effects of the booms on ice and ship interaction and vice versa. Throughout the four winter seasons, the small quantities of ice lost over and between the booms were manageable. Ships usually passed through the boom without influencing the boom force levels, but at time they brought about large changes. One boom needed strengthening, and artificial islands were added for upstream ice stability. Coast Guard icebreakers were also a necessary part of winter navigation in this area.
    Type of Medium: Series available for loan
    Pages: iv, 18 Seiten , Illustrationen
    Series Statement: CRREL Report 84-4
    Language: English
    Note: CONTENTS Abstract Preface Introduction St. Marys River Ice problems Remedial measures Field studies Highlights, trends, and major findings Modifications to boom Maximum forces Ship traffic Characteristics Effect of boom forces Effect on ice Conclusion Literature cited Appendix A: Ice boom forces
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 48
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-81/16
    In: CRREL Report, 81-16
    Description / Table of Contents: An air-transportable shelter designed and built at CRREL for use in cold regions underwent testing in Hanover, New Hampshire, and Ft. Greely, Alaska. The shelter demonstrated some of its capabilities for mobility by being towed for more than 60 miles behind various vehicles and by being transported on a C-130 cargo airplane, a CH-47 helicopter, and a trailer truck. The shelter proved to be very easy for a crew of two to four to set up in all weather conditions including -40 F cold. However, the gasoline-powered generator, which was a source for space heat as well as electricity, functioned very poorly. Overall, the prototype successfully demonstrated qualities of self-reliance, ease of operation and thermal efficiency.
    Type of Medium: Series available for loan
    Pages: v, 20 Seiten , Illustrationen
    Series Statement: CRREL Report 81-16
    Language: English
    Note: CONTENTS Abstract Preface Metric conversion factors Summary Introduction Description of shelter Test procedures and results Mobility Ease of erecting and striking Therinal efficiency and performance Heat output Electrical system Habitation Safety features Water system Shelter reliability Structure Performance of other shelters Conclusions Future studies Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 49
    Call number: ZSP-201-81/15
    In: CRREL Report, 81-15
    Description / Table of Contents: This report analyzes the results of a field study previously reported by Scrivner et al. (1969) for the National Cooperative Highway Research Program. These authors studied the seasonal pavement deflection characteristics of 24 test sites on roads in service in regions with freezing indexes ranging from 100 F-days to 2100 F-days. They used the Dynaflect cyclic pavement loading device to determine the pavement system response. Of specific interest to my analysis was the increased pavement deflection after freezing and thawing and the time to recovery of normal deflection characteristics. These characteristics were related to soil and climatic factors using statistical techniques. The most significant observations of this statistical analysis are: (1) that the freezing index is not a significant parameter in determining the percent increase in pavement deflection during thawing, and (2) that the recovery time is inversely proportional to the depth of freezing. As was expected, the most significant variable affecting the increase in pavement deflection was the frost susceptibility classification. This observation reinforces the necessity for careful selection of soil materials used in pavement systems.
    Type of Medium: Series available for loan
    Pages: v, 10 Seiten , Ilustrationen
    Series Statement: CRREL Report 81-15
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Description of test site Test results Method of analysis Results of analysis Change in resilient deflection due to thawing, A Recovery time after onset of thawing, t20 Discussion of results Change in resilient deflection due to thawing, A. Recovery time after thawing, t20 Conclusions Literature cited ILLUSTRATIONS Figure Pavement deflection and frost penetration vs time Data points and regression line for A and t2 0 versus F Data points and regression line for A and t2 0 versus W Data points and regression line for A and t2 0 versus I Data points and regression line for A and t20 versus N Data points and regression line for A and t20 versus D Data points and regression line for t20 versus A Permeability vs void ratio for the Toledo Penn 7 material TABLES Properties of test sections Test results from Scrivner et al Results of regression analysis
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 50
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-81/3
    In: CRREL Report, 81- 3
    Description / Table of Contents: Abstract: A 1:24 scale hydraulic model study of water intake under frazil ice conditions is presented. The intake, located 9 m below the surface of the St. Lawrence River in Massena, New York,has a through flow of 0.14 m^3/s. The model study, conducted in the refrigerated flume facility of the U.S. Army Cold Regions Research and Engineering Laboratory, investigated methods of minimizing the frazil ice blockage on the intake. Two protective structures were modeled and the relative benefits of each are presented. The additional cross-sectional area provided by the protective structures lowered the vertical velocity component of the intake water to 0.0027 m/s. At this velocity the buoyant force acting on the frazil ice particle is larger than the downward drag force, causing the particle to rise. The results demonstrate that under certain low flow conditions a protective structure can minimize frazil ice blockage problems.
    Type of Medium: Series available for loan
    Pages: 11 Seiten , Illustrationen
    Series Statement: CRREL Report 81-03
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 51
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-81/2
    In: CRREL Report, 81-2
    Description / Table of Contents: Abstract: Many hyperbolic reflections have been observed on marine seismic records obtained during oil exploration in the Beaufort Sea, and on USGS seismic sub-bottom profiles from the Prudhoe Bay vicinity. A hyperbolic projection system was designed to rapidly measure seismic velocities from the curves on the records. The velocities observed were approximately the velocity of sound in water. The hyperbolic signals also showed dispersion properties similar to acoustic normal modes in shallow water. These observations indicate that the signals responsible for the hyperbolic reflections propagate as normal modes within the water layer, with very limited penetration of the seabed. Determinations of the dominant frequency of these signals indicate that the penetration into the seabed has a characteristic attenuation depth (skin depth) of about 1.5 m for the sub-bottom profiles and 12 m for the marine records. It therefore appears that some hyperbolic reflections may be generated by variations in materials that occur near the seabed. There is some evidence of linearity of the anomalies, possibly related to sediment-filled or open ice gouges, or other changes in material properties at shallow depths.
    Type of Medium: Series available for loan
    Pages: iv, 16 Seiten , Illustrationen
    Series Statement: CRREL Report 81-2
    Language: English
    Note: CONTENTS Abstract Preface Introduction Methods of analysis Marine seismic records Seismic sub-bottom profiles Results and discussion Distribution of hyperbolic reflections Hyperbolas on oil exploration records Hyperbolas on sub-bottom profiles Conclusions Literature cited Appendix A: Hyperbola projector
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 52
    Call number: ZSP-201-81/6
    In: CRREL Report, 81-6
    Description / Table of Contents: Abstract: A procedure is described for monitoring the microfracturing activity in ice plates subjected to constant loads. Sample time records of freshwater ice plate deflections as well as corresponding total acoustic emission activities are presented. The linear elastic, as well as viscoelastic, response for a simply supported rectangular ice plate is given. Suggested future work using the above procedure is discussed.
    Type of Medium: Series available for loan
    Pages: iv, 19 Seiten , Illustrationen
    Series Statement: CRREL Report 81-6
    Language: English
    Note: CONTENTS Abstract Preface Notation Introduction Experimental procedure and considerations Growth of the ice plate Support of the ice plate Acoustic emission monitoring system Displacement transducers and data recording Mechanical loading System Analysis Experimental results Thin section analysis Summary and discussion Literature cited Appendix A : Ice plate linear elastic response Appendix B: Acoustic emission system sensitivity Appendix C: Ice plate linear viscoelastic response Appendix D: Equipment list
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 53
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-81/11
    In: CRREL Report, 81-11
    Description / Table of Contents: Abstract: Relative displacement data from high explosive, shallow-buried bursts in rock are combined with relative displacement data from the contained nuclear explosion MIGHTY EPIC. Analysis of these data yields a preliminary, semi-empirical technique for predicting the location, direction and magnitude of relative displacements in rock from contained explosions. This technique is used to make relative displacement predictions for the DIABLO HAWK nuclear blast.
    Type of Medium: Series available for loan
    Pages: iv, 23 Seiten , Illustrationen
    Series Statement: CRREL Report 81-11
    Language: English
    Note: CONTENTS Abstract Preface Introduction DIHEST analysis MIGHTY EPIC analysis Geological setting and relative displacement documentation Shear stress analysis 8 Displacement analysis DIABLO HAWK predictions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 54
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-85/22
    In: CRREL Report, 85-22
    Description / Table of Contents: Tests in level ice on an idealized icebreaker bow in the shape of a simple wedge were conducted in the test basin. The horizontal and vertical forces on the wedge were measured, and floe size distribution in the wake of the wedge was observed. From the force measurements, the ice wedge/hull friction factor was calculated and found to be in general agreement with the friction factor measured in separate friction tests. The ice floe length and ice floe area measured in the current study were found to follow log-normal probability distributions defined by the length average L and area average A and corresponding standard deviations SL and SA. The results of these tests and other tests conducted at another facility showed that the ratios A/h2 and L/h (A =average floe area, L averagefloe length, h = ice thickness) were, for the same type of model ice, directly proportional to the parameter y/-yh. (a = ice bending strength, tj7= specific weight of water) and a/y, respectively, and independent of the velocity and ice strain modulus or ice characteristic* length. However, the coefficients of proportionality appear to depend upon the type of model ice used in the tests. The ratios Si/A were independent of o/yh but varied with the bow shape and the type of ice. The available field data are not sufficient for meaningful comparison with the laboratory results.
    Type of Medium: Series available for loan
    Pages: iv, 53 Seiten , Illustrationen
    Series Statement: CRREL Report 85-22
    Language: English
    Note: CONTENTS Abstract Preface Introduction Experimental set-up and conditions Results of wedge resistance measurements Results of floe size measurements Statistical analysis of data Comparison between model and full-scale data Conclusions and recommendations Literature cited Appendix A: Wedge tests-floe size measurements Appendix B: Wedge tests-histograms of floe length and floe area Appendix C: Cumulative frequency distributions for floe length and floe area
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 55
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-86/14
    In: CRREL Report, 86-14
    Description / Table of Contents: Three methods for determining the frost susceptibility of soils are evaluated in this report. These methods are the U.S. Army Corps of Engineers frost design soil classification system, a moisture-tension/hydraulic-conductivity test, and a laboratory freeze-thaw test. The Corps method, which is based on particle size, soil classification, and a laboratory freezing test, was found to be useful for identifying frost-susceptibility. The moisture-hydraulic-conductivity test was found to be unacceptable because it required too much time and its results correlated poorly with field observations. The freeze-thaw test was determined to be the most accurate of the methods studied, including the freeze test that is a part of the Corps method. The freeze-thaw test is thoroughly described. It includes indexes of both frost-heave susceptibility (heave rate) and thaw-weakening susceptibility (CBR after thawing). It also accounts for the effects of freeze-thaw cycling and is completely automated to improve the repeatability of the test results. It is suggested that the freeze-thaw test considered as a replacement for the Corps freezing test.
    Type of Medium: Series available for loan
    Pages: v, 56 Seiten , Illustrationen
    Series Statement: CRREL Report 86-14
    Language: English
    Note: Contents Abstract Preface Introduction Description of the selected sites Corps of engineers frost design soil classification system Moisture-tension/hydraulic-conductivity tests Freezing test Validation Description of test sites and materials Sample preparation Results and analysis of laboratory tests Corps of engineers frost design soil classification system Moisture-tension/hydraulic-conductivity test Freezing test Discussion Conclusions Recommendations Literature cited Appendix A: Summary of frost-susceptibility tests on natural soil
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 56
    Call number: ZSP-201-87/2
    In: CRREL Report, 87-2
    Description / Table of Contents: This is the third in a series of four reports on the laboratory and field testing of a number of road and airfield subgrades, covering the laboratory repeated-load triaxial testing of five soils in the frozen and thawed states and analysis of the resulting resilient modulus measurements. The laboratory testing procedures allow simulation of the gradual increase in stiffnessfound in frost-susceptible soils after thawing. The resilient modulus is expressed in a nonlinear model in terms of the applied stresses, the soil moisture tension level (for unfrozen soil), the unfrozen water content (for frozen soil) and the dry density. The resilient modulus is about 10 GPa for the frozen material at temperatures in the range of -5° to -8° C. The decrease in modulus with increasing temperature was well-modeled in terms of the unfrozen water content. Upon thaw, the modulus dropped to about 100 MPa and generally increased with increasing confining stress and decreased with increasing principal stress ratio. The modulus also increased with the soil moisture tension level. The resilient Poisson's ratio did not appear to be a systematic function of any of the test variables.
    Type of Medium: Series available for loan
    Pages: iii, 36 Seiten , Illustrationen
    Series Statement: CRREL Report 87-2
    Language: English
    Note: CONTENTS Abstract Preface Introduction Test sections and materials Specimen preparation Test soils Asphalt concrete Laboratory testing Soil testing Waveforms of applied stress Asphalt concrete Data reduction and analysis Soil Asphalt concrete Results and discussion General Resilient modulus Summary Conclusions Literature cited Appendix A: Soil moisture tension versus water content for several test soils Appendix B: Tabulated results for all tests on frozen and thawed soils
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 57
    Call number: ZSP-201-86/18
    In: CRREL Report, 86-18
    Description / Table of Contents: Findings from a six-year yield and laboratory program of frost action research in four principal areas are summarized. Research on the first topic, frost susceptibility index tests, led to selection of the Corps of Engineers frost design soil classification system as a useful method at the simplest level of testing. At a much more complex level, a new freezing test combined with a CBR test after thawing is recommended as an index of susceptibility to both frost heave and thaw weakening. Under the second topic, a soil column and dual gamma system were developed and applied to obtain soil data used in improving and validating a mathematical model of frost heave, the objective of the third research topic. The model was effectively improved, a probabilistic component was added, and it was successfully tested against field and laboratory measurements of frost heave. A thaw consolidation algorithm was added, which was shown to be useful in predicting the seasonal variation in resilient modulus of granular soils, the objective of the fourth topic. A laboratory testing procedure was developed for assessing the resilient modulus of thawed soil at various stages of the recovery process, as a function of the applied stress and the soil moisture tension, which increases as the soil gradually desaturates during recovery. The procedure was validated by means of appropriate analyses of deflections measured on pavements by a falling-weight deflectometer. Frameworks for implementing findings from the principal research topics are outlined. Keywords: Airfields, Freezing thawing, Frost heave, Frozen soil, Resilient modulus, Roads.
    Type of Medium: Series available for loan
    Pages: v, 52 Seiten , Illustrationen
    Series Statement: CRREL Report 86-18
    Language: English
    Note: Contents Abstract Preface Introduction Field test sites Frost-susceptibility index testing Index tests selected Laboratory test results Conclusions Soil column and dual gamma system Design features Test results Mathematical model of frost heave and thaw settlement Model development Numerical approach Probabilistic concepts Model verification Discussion Seasonal variation in the resilient modulus of granular soils Characterization by laboratory testing Field verification Summary of predictive approach Simulating frost heave and pavement deflection Method of evaluation Results and discussion Summary of findings Frost-susceptibility index tests Soil column and dual gamma system Mathematical model of frost heave and thaw settlement Seasonal variation in resilient modulus of granular soils Implementation of research findings Corps of engineers frost design soil classification system New laboratory freeze-thaw test Frost-heave model Repeated-load triaxial test on frozen and thawed soil Evaluation of seasonal variation of resilient modulus Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 58
    Call number: ZSP-201-87/3
    In: CRREL Report, 87-3
    Description / Table of Contents: This report describes the structural analysis of multi-year sea ice samples that were tested in the first phase of a program designed to obtain a comprehensive understanding of the mechanical properties of multi-year sea ice from the Alaskan Beaufort Sea. Each test specimen is classified into one of three major ice texture categories: granular, columnar, or a mixture of columnar and granular ice. The crystallographic orientation, percent columnar ice, and grain size are then evaluated for the granular and/or columnar ice in the sample. Test results are interpreted with respect to these parameters. The overall composition of multi-year ridges is also considered, based on the extensive field sampling that was done in the program
    Type of Medium: Series available for loan
    Pages: iii, 40 Seiten , Illustrationen
    Series Statement: CRREL Report 87-3
    Language: English
    Note: CONTENTS Abstract Preface Introduction Sample analysis Continuous multi-year ridge core Tested multi-year ridge ice samples Tested multi-year floe ice samples Ice description Uniaxial constant-strain-rate compression tests Uniaxial constant-load compression tests Uniaxial constant-strain-rate tension tests Triaxial constant-strain-rate compression test Conclusions Literature cited Appendix A: Multi-year ridge sample data Appendix B: Multi-year floe sample data
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 59
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-87/4
    In: CRREL Report, 87-4
    Description / Table of Contents: In this report we present results of measurements of the crystalline structure and salinity characteristics of sea ice in Hebron Fiord and vicinity, Labrador. Structurally, the fiord ice was entirely first year and composed predominantly of congelation, columnar-type crystals. At most of the sampling sites the ice exhibited moderately to strongly aligned c-axes consistent with the inferred direction of near surface currents in the fiord. Generally diminished values of bulk salinity at five separate locations reflect the warm ice conditions encountered at the time of sampling (late May) and the effect of meltwater flushing in promoting loss of brine, vertically, from the ice sheet. Observations outside Hebron Fiord indicated the presence of only minor amounts of multiyear ice during the latter part of May.
    Type of Medium: Series available for loan
    Pages: iii, 25 Seiten , Illustrationen
    Series Statement: CRREL Report 87-4
    Language: English
    Note: Contents: Abstract Preface Introduction Sampling procedure Analytical techniques Salinities Crystal structure Results Salinity Crystal structure Brine layer spacing Incidental temperatures Conclusions Literature cited Appendix A: Vertical and horizontal thin section photographs of sea ice from various sites
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 60
    Call number: ZSP-201-87/6
    In: CRREL Report, 87-6
    Description / Table of Contents: Two-phase dielectric mixing model results are presented showing the electromagnetic properties of sea ice versus depth. The modeled data are compared with field measurements and show comparable results. It is also shown how the model data can be used in support of impulse radar and airborne electromagnetic(AEM) remote sensing of sea ice. Examples of the remote measurement of sea ice thickness using impulse radar operating in the 80- to 300-MHz frequency band and low-frequency (500 to 30,000 Hz) sounding techniques are presented and discussed. Keywords: Polar regions; Radar pulses.
    Type of Medium: Series available for loan
    Pages: vii, 55 Seiten , Illustrationen
    Series Statement: CRREL Report 87-6
    Language: English
    Note: Contents Abstract Preface Nomenclature Introduction Sea ice growth and structure Model sea ice Brine salinity Seawater and model brine conductivity Complex dielectric constant of brine Electromagnetic properties of model sea ice at 100 MHz Electromagnetic properties of model sea ice at 100 and 500 MHz and 1 and 5 GHz Example of impulse radar sea ice profiling results Example of frequency-domain electromagnetic sea ice thickness sounding Concluding remarks Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 61
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-87/13
    In: CRREL Report, 87-13
    Description / Table of Contents: Thermodynamic properties of electrolyte solutions change rapidly below 25C, but these properties are seldom measured over the low temperature range (below 0C), even though some salt solutions can remain unfrozen to -50C. The heat capacities of concentrated solutions (0.5-0.6 molal) of NaC-H2O were measured from 25C to -40C as part of a study to provide thermodynamic data of salt solutions for use in cold regions chemical and geophysical studies. A differential scanning calorimeter was used to measure specific heat capacity from cooling scans as a function of temperature and concentration. The heat capacity data were fit to the equations of Pitzer and coworkers to obtain activity and osmotic coefficients of NaC and H2O, respectively, below o C. Supercooling of the solutions was encouraged by using a fast scan rate (10d2/minute) so that specific heat could be measured to lower temperatures than would be possible if the solutions were allowed to equilibrate with the solid phases. The solubility of ice was calculated and compared to the experiment freezing point of NaC solutions.
    Type of Medium: Series available for loan
    Pages: ii, 16 Seiten , Illustrationen
    Series Statement: CRREL Report 87-13
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 62
    Call number: ZSP-201-82/19
    In: CRREL Report, 82-19
    Description / Table of Contents: Under proper design and management, a forest ecosystem in the central United States should renovate municipal wastewater as long or longer than conventional agricultural systems, especially when design limitations are hydraulic loading rate, heavy metals, P and N. Forest systems require smaller buffer zones than agricultural systems and lower sprinkler pressures. Immature forests are better wastewater renovators than mature forests.
    Type of Medium: Series available for loan
    Pages: iv, 22 Seiten , Illustrationen
    Series Statement: CRREL Report 82-19
    Language: English
    Note: CONTENTS Abstract Preface Introduction Forest systems design Pretreatment Distribution systems Public health considerations Buffer zone requirements Toxic effects Public access Hydraulic loading Nutrient uptake and loading Introduction Nitrogen Phosphorus Trace metals Design considerations Hydraulic loading rates Nitrogen loading rates Forest management options Reforestation Existing forest ecosystems Short term rotation plantations Potential long term effects on forest ecosystems Longevity of forest systems Consequences of overloading Soil chemical, physical and hydrologic properties Productivity Summary Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 63
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-82/17
    In: CRREL Report, 82-17
    Description / Table of Contents: Seismic P and SH wave refraction experiments at the NATO RSG-11 test site in Munster Nord, Federal Republic of Germany, reveal the presence of a nearly horizontal, three-layer velocity structure. The upper layer, composed of un­consolidated glacial till, is 1 m thick and has P (compressional) and SH (shear-horizontal) wave velocities of 240 and 165 m s-1. The second layer, made up of similar, more compacted material, is 9.5 m thick, with a P wave velocity of 470 m s-1 and an SH wave velocity of 275 m s-1. The third layer, interpreted as the groundwater table, is located at a depth of 10.5 m and has a P wave velocity of 1590 m s-1. The SH wave velocity of this layer is controlled by the matrix material and is the same as that of the second layer. A single, unreversed observation indicated a fourth layer at a depth of about 20 m, but the existence of this layer remains unconfirmed. The observed fundamental mode Love wave dispersion is in agreement with the theoretical dispersion predicted by the refraction velocities. Computed partial derivatives of phase velocity with respect to shear wave velocity show, for the frequencies observed, that the dispersion confirms the thicknesses and velocities of the two upper layers and is not affected by the deeper structure.
    Type of Medium: Series available for loan
    Pages: iv, 33 Seiten , Illustrationen
    Series Statement: CRREL Report 82-17
    Language: English
    Note: CONTENTS Abstract Preface Introduction Refraction experiments Procedure Equipment Results P waves Low velocity zone SH waves Surface wave experiments Summary and discussion Literature cited Appendix A: P wave refraction data Appendix B: SH wave refraction data. Appendix C: Surface wave dispersion calculations
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 64
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-80/26
    In: CRREL Report, 80-26
    Description / Table of Contents: A vital concern to the survivability of hardened underground structures in rock is the relative displacement induced along geologic discontinuities by nearby explosions. Such displacement, commonly termed block motion, can occur along faults, joints, bedding planes and other structural weaknesses in rock. This report documents all occurrences of block motion observed during the development of DIHEST, a series of shallow-buried high explosive experiments designed to simulate the direct induced ground motions from a nuclear surface burst. Instances of block motion are described, along with pertinent details of the explosive arrays, geology and ground motion fields. The influence of these and other factors on the direction and magnitude of block motion is discussed.
    Type of Medium: Series available for loan
    Pages: vi, 62 Seiten , Illustrationen
    Series Statement: CRREL Report 80-26
    Language: English
    Note: CONTENTS Abstract Preface Conversion factors Introduction STARMET Test description Test results PLANEWAVE II Test description Test results DATEX II Test description Test results HANDEC II Test description Test results ROCKTEST II Test description Test results Summary and discussion Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 65
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-82/40
    In: CRREL Report, 82-40
    Description / Table of Contents: The use of explosives to break floating ice sheets is described, and test data are used to develop design curves that predict explosives effects as ice thickness, charge size, and charge depth vary. Application of the curves to practical problems is illustrated by numerical examples. The general features of underwater explosions are reviewed and related to ice blasting. Quasi-static plate theory is considered, and is judged to be inapplicable to explosive cratering of ice plates. The specific energy for optimized ice blasting is found to compare quite favorably with the specific energy of icebreaking ships. All available field data for ice blasting are tabulated in appendices, together with details of the re­gression analyses from which the design curves are generated.
    Type of Medium: Series available for loan
    Pages: iv, 68 Seiten , Illustrationen
    Series Statement: CRREL Report 82-40
    Language: English
    Note: CONTENTS Abstract Preface Introduction General behavior of underwater explosions Regression analysis for ice-blasting data General features of the regression curves Use of the regression curves as design curves for ice blasting Row charges and pattern charges Response of floating ice sheets to underwater explosions Specific energy and “powder factor” Summary and conclusions Literature cited Appendix A: Basic data on ice blasting Appendix B: Scaled input data Appendix C: Initial regression analysis using complete polynomial Appendix D: Regression analysis with two coefficients of the original poly­nomial deleted
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 66
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-82/38
    In: CRREL Report, 82-38
    Description / Table of Contents: Extreme cold causes heavy buildup of frost, ice and condensation on many windows. It also increases the incentive for improving the airtightness of windows against heat loss. Our study shows that tightening specifications for Alaskan windows to permit only 30% of the air leakage allowed by current American airtightness standards is economically attractive. We also recommend triple glazing in much of Alaska to avoid window icing in homes and barracks. We base our conclusions on a two-year field study of Alaskan military bases that included recording humidity and temperature data, observing moisture accumulation on windows and measuring airtightness with a fan pressurization device.
    Type of Medium: Series available for loan
    Pages: v, 26 Seiten , Illustrationen
    Series Statement: CRREL Report 82-38
    Language: English
    Note: Contents Abstract Preface Nomenclature Introduction Previous work in cold weather window performance Investigation Data acquisition and analysis Modeling the window thermal regime Moisture and ice observations Airtightness testing and analysis Annual heat loss from air leakage Results and conclusions Moisture on windows Airtightness Airtightness economics Recommendations for windows in extreme cold Airtightness Multiple glazing Literature cited Appendix A: Moisture levels and airtightness Appendix B: Dewpoint data Appendix C: Sample observations of icing
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 67
    Call number: ZSP-201-82/37
    In: CRREL Report, 82-37
    Description / Table of Contents: This report presents a Landsat-derived land cover map of the northwest portion of the Arctic National Wildlife Refuge, Alaska. The report is divided into two parts. The first is devoted to the land cover map with detailed descriptions of the mapping methods and legend. The second part is a description of the study area. The classification system used for the maps is an improvement over existing methods of describing tundra vegetation. It is a comprehensive method of nomenclature that consistently applies the same criteria for all vegetation units. It is applicable for large- and small-scale mapping and is suitable for describing vegetation complexes, which are common in the patterned-ground terrain of the Alaskan Arctic. The system is applicable to Landsat-derived land cover classifications. The description of the study area focuses on five primary terrain types: flat thaw-lake plains, hilly coastal plains, foothills, mountainous terrain, and river flood plains. Topography, landforms, soils and vegetation are described for each terrain type. The report also contains area summaries for the Landsat-derived map categories. The area summaries are generated for the five terrain types and for the 89 townships within the study areas. Two land cover maps at 1:250,000 are included.
    Type of Medium: Series available for loan
    Pages: 68 Seiten , Illustrationen, 2 Karten
    Series Statement: CRREL Report 82-37
    Language: English
    Note: CONTENTS Abstract Preface Foreword Introduction A land cover map of the ANWR study area Legend development Mapping method Results Discussion Description of the ANWR study area General description Description of specific terrain types Conclusions Literature cited Appendix A: Descriptions of Landsat land cover categories for ANWR Appendix B: Area summaries Appendix C: Aproximate equivalent units in several systems of land cover, wetland and vegetation classifications used in northern Alaska Appendix D: Soil taxonomy Appendix E: Summary of principal Landsat land cover categories within the terrain types of the ANWR study area
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 68
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-82/24
    In: CRREL Report, 82-24
    Description / Table of Contents: Velocity data derived from petroleum industry seismic records from Harrison Bay show that high-velocity material ( or = 2 km/s) interpreted to be ice-bonded permafrost is common. In the eastern part of the bay, the depth to high velocity material increases and velocity decreases in an orderly manner with increasing distance from shore until the layer is no longer apparent. The western part of the bay is less orderly, possibly reflecting a different geological and thermal history. This western part may be an inundated section of the low coastal plain characterized by the region north of Teshekpuk Lake, and could have contained deep thaw lakes, creating low velocity zones. Along some seismic lines, the high-velocity material extends approximately 25 km offshore. Two anomalies have been found which could be associated with rapidly degrading permafrost. One is strong attenuation, which was interpreted as an indication of gas in the shallow deposits. The other is the presence of considerable seismic noise, including identifiable small seismic events. The origin of this noise has not been positively established, and it is proposed that it may indicate that some movement is occurring in the sediments due to thaw.
    Type of Medium: Series available for loan
    Pages: 65 Seiten , Illustrationen
    Series Statement: CRREL Report 82-24
    Language: English
    Note: CONTENTS Abstract Preface Introduction Methods Reading records Refractions Reflections Rayleigh waves Spatial resolution Anomalies Results and discussion Seismic velocity distribution Attenuation Low-level natural seismicity Summary Literature cited Appendix A: Error estimates Appendix B: Velocity profiles Appendix C: Seismic cross sections
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 69
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-82/30
    In: CRREL Report, 82-30
    Description / Table of Contents: Equations are developed that can be used to determine the amount of gas present in sea ice from measurements of the bulk ice density, salinity and temperature in the temperature range o f-2 to -30°C. Conversely these relationships can be used to give the density of sea ice as a function of its temperature and salinity, considering both the presence of gas and of solid salts in the ice. Equations are also given that allow the calculation of the gas and brine volumes in the ice at temperatures other than that at which the bulk density was determined.
    Type of Medium: Series available for loan
    Pages: 13 Seiten , Illustrationen
    Series Statement: CRREL Report 82-30
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 70
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-82/29
    In: CRREL Report, 82-29
    Description / Table of Contents: Ice grains in a snow cover with a low temperature gradient assume a well-rounded equilibrium form. However, at temperature gradients of 0.1 to 0.2 C/cm (depending somewhat on temperature and snow density), the rounded grains recrystallize into a faceted kinetic growth form. The large temperature gradient must play a decisive role in moving the vapor fast enough to sustain the rapid growth rate associated with the kinetic growth form. Once the large temperature gradient is removed, the grains recrystallize back to the equilibrium form. the recrystallization occurs in either direction without a change in bulk density. The growth of faceted crystals begins at the warmer base of the snow cover where the excess vapor pressure is largest. A transition between the overlying rounded grains moves upward in time. Faceted crystals also grow just below crusts of reduced permeability, where the increased vapor accumulation can sustain the excess vapor pressure neded for kinetic growth. The heat and vapor flows are described using a model based on thermodynamic equilibrium. The temperature distribution is shown to be quasi-linear at steady state in homogeneous snow. The recrystallization of the snow is modeled using the rounded grains as sources and the faceted grains as sinks. In the future this model should be extended to account for different temperatures among the sources and sinks.
    Type of Medium: Series available for loan
    Pages: 27 Seiten , Illustrationen
    Series Statement: CRREL Report 82-29
    Language: English
    Note: Contents: Abstract Preface Introduction Vapor flow Temperature profile Crystal growth rates Equilibirum versus kinetic growth forms of snow crystals Discussion Summary Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 71
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-82/34
    In: CRREL Report, 82-34
    Description / Table of Contents: The ice discharge through an opening in an ice control structure was documented to be a function of the floe size, ice type, ice floe conditions and vessel direction. The model data for the average ice discharge per vessel transit scaled to prototype values compared favorably with data taken at the St. Marys River ice control structure (ICS). The model results of the force measurements were also consistent with data taken at the St. Marys ICS. The dynamic loading conditions were independent of vessel direction. The dynamic loading to the structure using 3 types of ice (plastic, natural and urea-doped) showed a considerable difference in their means and standard deviations. The urea-doped ice was evaluated for dynamic loading conditions, and reasonable peak values of 3 to 5 times the mean load at each measuring position were recorded, independent of vessel direction. It appears that synthetic random ice floes may be used in model studies where ice discharge through an opening in a structure needs to be documented. This study shows the synthetic random ice floe discharge to fall reasonably within the values obtained for natural ice discharge for both rafted and non-rafted ice fields above the ICS. However, the question of whether synthetic ice can be used for analyzing force distributions and dynamic force loading criteria cannot be fully answered at this time because the load distributions of the synthetic and natural floes appear to differ.
    Type of Medium: Series available for loan
    Pages: 68 Seiten , Illustrationen
    Series Statement: CRREL Report 82-34
    Language: English
    Note: CONTENTS Abstract Preface Introduction Scope of work Ice discharge from Lake Huron into St. Clair River Water velocity profiles at Port Huron Ice conditions Physical model Basis for selection Description Instrumentation Model ice control structure Open water calibration Open water tests Experimental procedures and techniques Ice cover calibration Ice control structure orientation Analysis of ice discharge due to ship transits Natural ice Synthetic ice Forces on the ice control structure Static measurements Dynamic force measurements Potential additional shear stresses Anticipated ice conditions with ICS Conclusions Literature cited Appendix A. Application of model results Appendix B. Suggested additional studies Appendix C. Derivation of ice discharge
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 72
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/26
    In: CRREL Report, 83-26
    Description / Table of Contents: Ice accreted on high-speed rotors operating in supercooled fog can be thrown off by centrifugal force, creating severe unbalance and dangerous projectiles. A simple force balance analysis indicates that the strength of accreted ice and its adhesive strength can be obtained by measuring the thickness of the accretion, the location of the separation, the rotor speed, and the density. Such an analysis was applied to field and laboratory observations of self-shedding events. The results agree reasonably well with other observations.
    Type of Medium: Series available for loan
    Pages: 13 Seiten , Illustrationen
    Series Statement: CRREL Report 83-26
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 73
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/19
    In: CRREL Report, 84-19
    Description / Table of Contents: In this study a method for making long-range forecasts of freeze-up dates in rivers is developed. The method requires the initial water temperature at an upstream station, the long-range air temperature forecast, the predicted mean flow velocity in the river reach, and water temperature response parameters. The water temperature response parameters can be either estimated from the surface heat exchange coefficient and the average flow depth or determined empirically from recorded air and water temperature data. The method is applied to the St. Lawrence River between Kingston, Ontario, and Massena, New York, and is shown to be capable of accurately forecasting freeze-up. Originator-supplied keywords include: Ice formation, and River ice.
    Type of Medium: Series available for loan
    Pages: iii, 22 Seiten , Illustrationen
    Series Statement: CRREL Report 84-19
    Language: English
    Note: CONTENTS Abstract Preface Introduction Problem formulation Analytical treatment Application to the upper St. Lawrence River Summary Literature cited Appendix A: Basic program for St. Lawrence River freeze-up forecast
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 74
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/17
    In: CRREL Report, 84-17
    Description / Table of Contents: VHF-band radiowave short pulses were transmitted within the permafrost tunnel at Fox, Alaska, over distances between 2.2 and 10.5 m. The propagation medium was a frozen silt containing both disseminated and massive ice with temperatures varying from -7°C near the transmitter to probably -2 C near the center of the tunnel overburden. The short pulses underwent practically no dispersion in the coldest zones but did disperse and refract through the warmer overburden, as suggested by calculations of the effective dielectric constant. Most significantly the measured frequency content decreased as the effective dielectric constant increased. The results indicate that deep, cross-borehole pulse transmissions over distances greater than 10 m might be possible, especially when the ground is no warmer than -4°C. The information thus pined could be used for identifying major subsurface variations, including ground ice features.
    Type of Medium: Series available for loan
    Pages: ii, 14 Seiten , Illustrationen
    Series Statement: CRREL Report 84-17
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 75
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/15
    In: CRREL Report, 84-15
    Description / Table of Contents: Measurements of meltwater pH from annual layers of South Pole firn and ice samples ranging in age from 40 to 2000 years B.P. show that precipitation at this remote site has a higher natural acidity than that expected from atmospheric equilibrium with CO2. The average pH of deaerated (CO2-free) samples was 5.64 + or - 0.08, while air-equilibrated samples averaged 5.37 + or - 0.008, a pH that is about a factor of two more acidic than the expected background pH of 5.65. The observed 'excess' acidity can be accounted for by natural SO4(2)- and NO(3)- levels in the samples probably originating from non-anthropogenic H2SO4 and HNO3. Because of the presence of these naturally occurring acids in South Pole precipitation, a pH of 5.4 is considered a more representative baseline reference pH for acid precipitation studies.
    Type of Medium: Series available for loan
    Pages: ii, 12 Seiten , Illustrationen
    Series Statement: CRREL Report 84-15
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 76
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/12
    In: CRREL Report, 84-12
    Description / Table of Contents: Icing on stationary structures such as oil rigs is becoming an increasingly serious problem as offshore drilling operations in the subpolar regions become more common. Little information exists on this subject. Extensive observations have been made of icing on the upper structures of moving ships, but the complexity of this problem makes analysis of the results very difficult. Even the generation of water drops in this case involves many factors, such as windspeed, wave direction relative to the bearing of the ship, and size and free-board of the ship. On stationary structures, however, the problem is much simpler, since the major factor in drop generation is whitecaps produced by wind, and no motion of the structure is involved. In the present study, a theoretical calculation was made by combining the data available on the generation of drops by wind with data on the proportion of ice frozen from the collected water. The rate of ice accumulation on stationary structures was calculated using published data. The results were compared with icing measured on board ships. Although the general trend of this calculation indicated parallelism with the onboard measurements, the measured ice accumulation rate on ships needed a 5 to 8 m/s higher windspeed to correspond with the calculated rate for stationary structures.
    Type of Medium: Series available for loan
    Pages: ii, 13 Seiten , Illustrationen
    Series Statement: CRREL Report 84-12
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 77
    Call number: ZSP-201-84/9
    In: CRREL Report, 84-9
    Description / Table of Contents: This report presents the results of the first phase of a test program designed to obtain a comprehensive understanding of the mechanical properties of multi-year sea ice from the Alaskan Beaufort Sea. In Phase I, 222 constant-strain-rate uni-axial compression tests were performed on ice samples from ten multi-year pressure ridges to examine the magnitude and variation of ice strength within and between pressure ridges. A limited number of constant-strain-rate compression and tension tests, constant-load compression tests, and conventional triaxial tests were also performed on ice samples from a multi-year floe to provide preliminary data for developing ice yield criteria and constitutive laws for multi-year sea ice. Data are presented on the strength, failure strain, and modulus of multi-year sea ice under different loading conditions. The statistical variation of ice strength within and between pressure ridges is examined, as well as the effects of ice temperature, porosity, structure, strain rate and confining pressure on the mechanical properties of multi-year sea ice.
    Type of Medium: Series available for loan
    Pages: v, 107 Seiten , Illustrationen
    Series Statement: CRREL Report 84-9
    Language: English
    Note: CONTENTS Abstract Preface Introduction Field Sampling Site selection and description Ice sampling procedures Shipping and storage of ice samples Testing Techniques Multi-year Pressure Ridge Tests Ice description Sampling scheme and test variables Uniaxial compressive strength Residual compressive strength Failure strains Initial tangent modulus Statistical Variations in Ice Strength Differences in strength above and below level ice Sources of the variation in strength Shape of the strength histograms Multi-year Floe Ice Tests Ice description Uniaxial compressive strength Constant-load compression tests Constant-strain-rate tension tests Triaxial tests Conclusions Literature Cited Appendix A: Structural profile of a multi-year pressure ridge core Appendix B: Ridge uniaxial compression test data Appendix C: Structural profile of the continuous multi-year floe core Appendix D: Multi-year floe test data
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 78
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/30
    In: CRREL Report, 83-30
    Description / Table of Contents: Ice sheets are formed and retained in several ways in nature, and an understanding of these factors is needed before most structures can be successfully applied. Many ice sheet retention structures float and are somewhat flexible; others are fixed and rigid or semirigid. An example of the former is the Lake Erie ice boom and of the latter, the Montreal ice control structure. Ice sheet retention technology is changing. The use of timber cribs is gradually but not totally giving way to sheet steel pilings and concrete cells. New structures and applications are being tried but with caution. Ice-hydraulic analyses are helpful in predicting the effects of structures and channel modifications on ice cover formation and retention. Often, varying the flow rate in a particular system at the proper time will make the difference between whether a structure will or will not retain ice. The structure, however, invariably adds reliability to the sheet ice retention process.
    Type of Medium: Series available for loan
    Pages: iv, 39 Seiten , Illustrationen , 1 Beilage
    Series Statement: CRREL Report 83-30
    Language: English
    Note: Contents Abstract Preface Introduction Natural ice sheets Choosing an ice control structure Flexible structures Ice booms Frazil collector lines Fence booms Rigid or semirigid structures Pier-mounted booms Stone groins Artificial islands Removable gravity structures Timber cribs Weirs Pilings and dolphins Structures built for other purposes Hydroelectric dams Wicket dams Light piers and towers Bridge piers Breakwaters Ice control not using Structures Channel improvements Ice sheet tying Ice sheet bridges Conclusions Literature cited Appendix A: Ice control structure
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 79
    Call number: ZSP-201-86/13
    In: CRREL Report, 86-13
    Description / Table of Contents: Stress-deformation data for six granular soils ranging from sandy silt to dense-graded crushedstone were obtained from in-situ tests and laboratory tests. Surface deflections were measured in the in-situ tests, with repeated-load plate-bearing and falling-weight deflectometer equipment, when the six granular soils were frozen, thawed, and at various stages of recovery from thaw weakening. The measured deflections were used to judge the validity of procedures developed for laboratory triaxial tests to determine nonlinear resilient moduli of specimens in the frozen, thawed, and recovering states. The validity of the nonlinear resilient moduli, expressed as functions of externally applied stress and moisture tension, was confirmed by using the expressions tocalculate surface deflections that were found to compare well with deflections measured in the in-situ tests. The tests on specimens at various stages of recovery are especially significant because they show a strong dependence of the resilient modulus on moisture tension, leading to the conclusion that predictions or in-situ measurements of moisture tension can be used to evaluate expected seasonal variation in the resilient modulus of granular soils.
    Type of Medium: Series available for loan
    Pages: iv, 148 Seiten , Illustrationen
    Series Statement: CRREL Report 86-13
    Language: English
    Note: CONTENTS Abstract Preface Introduction Test sections Installing instruments and sampling Laboratory tests Asphalt concrete Base, subbase and subgrade soils Data analysis for base, subbase and subgrade soils Field tests Analysis of plate loading tests Analytical approach Results Discussion Conclusions Literature cited Appendix A: Field data Appendix B: Ground temperatures, moisture tension, water table and freezing iso-therms prevailing during plate loading tests Appendix C: Measured surface deflections compared with deflections calculated by NELAPAV Appendix D: Resilient moduli and supporting data calculated by NELAPA V at radius 0.0, taxiways A and B.
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 80
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-85/5
    In: CRREL Report, 85-5
    Description / Table of Contents: A dynamic-thermodynamic sea ice model is extended to include a full thermodynamic code and a complete multilevel ice thickness distribution. The variable thickness formulation includes a more realistic parameterization of ice ridging than used in previous models. Seasonal simulations have been performed using this model and the results have been analyzed with particular emphasis on examination of the ridge buildup results off the Canadian Archipelago and off the North Slope. This report presents a complete description of this model and discusses progress made on examining and testing the variable thickness extensions.
    Type of Medium: Series available for loan
    Pages: vi, 60 Seiten , Illustrationen
    Series Statement: CRREL Report 85-5
    Language: English
    Note: CONTENTS Abstract Preface Summary Introduction Description of the model Ice thickness equations Heat budget and oceanic boundary layer Analytic examination of the ridge redistribution process Theoretical framework Some specific redistributors Comparison to ridge morphological data Ice strength for different redistributors Numerical simulation results Basin-wide ice thickness and velocity characteristics Ice edge evolution and sensitivity Ice thickness characteristics off the Canadian Archipelago Comparison of observed and simulated ice drift Mass balance characteristics Concluding remarks Literature cited Appendix A: Mechanical redistributor Appendix B: Heat budget code Appendix C: Thickness finite difference code
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 81
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/26
    In: CRREL Report, 84-26
    Description / Table of Contents: Observations of shore ice pile-up and ride-up along the Alaska Beaufort Sea coast in 1983 and 1984 are presented. New information on historical accounts of onshore ice movement, uncovered since publication of Part I in this series, is reported. An account is given of ice overtopping a concrete caisson exploration island in the Canadian Beaufort Sea.
    Type of Medium: Series available for loan
    Pages: iii, 33 Seiten , Illustrationen
    Series Statement: CRREL Report 84-26
    Language: English
    Note: CONTENTS Abstract Preface Introduction Observations Discussion Literature cited Appendix A: Site location maps
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 82
    Call number: ZSP-201-86/12
    In: CRREL Report, 86-12
    Description / Table of Contents: Stress-deformation data for six granular soils ranging from sandy silt to dense-graded crushed stone were obtained from in-situ tests and laboratory tests. Surface deflections were measured in the in-situ tests, with repeated-load plate-bearing and falling-weight deflectometer equipment, when the six granular soils were frozen, thawed, and at various stages of recovery from thaw weakening. The measured deflections were used to judge the validity of procedures developed for laboratory triaxial tests to determine nonlinear resilient moduli of specimens in the frozen, thawed, and recovering states. The validity of the nonlinear resilient moduli, expressed as functions of externally applied stress and moisture tension, was confirmed by using the expressions to calculate surface deflections that were found to compare well with deflections measured in the in-situ tests. The tests on specimens at various stages of recovery are especially significant because they show a strong dependence of the resilient modulus on moisture tension, leading to the conclusion that predictions or in-situ measurements of moisture tension can be used to evaluate expected seasonal variation in the resilient modulus of granular soils.
    Type of Medium: Series available for loan
    Pages: v, 70 Seiten , Illustrationen
    Series Statement: CRREL Report 86-12
    Language: English
    Note: CONTENTS Abstract Preface Introduction Sampling of test section Laboratory tests Asphalt concrete Natural subgrade material Test soils Field tests Analysis of field-loading tests Discussion Conclusions Literature cited Appendix A: Field data Appendix 8: Ground temperatures prevailing during plate-loading tests Appendix C: Measured surface deflections compared with deflections calculated by NELAPAV Appendix D: Resilient moduli and supporting data calculated by NELAPAV
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 83
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/6
    In: CRREL Report, 83-6
    Description / Table of Contents: During the austral summers of 1976-77 and 1978-79, several ice cores were taken from the McMurdo Ice Shelf brine zone to investigate its thermal, physical and chemical properties. This brine zone consists of a series of super-imposed brine layers (waves) that originate at the seaward edge of the ice shelf and migrate at various rates, depending upon their age and position in the ice shelf. The brine in these layers becomes increasingly concentrated as the waves migrate inland through the permeable ice shelf firn. Chemical analyses of brine samples from the youngest (uppermost) brine wave show that it contains sea salts in normal seawater proportions. Further inland, deeper and older brine layers, though highly saline (S 〉 200 ‰), are severely depleted in SO2-4 with the SO2-4/Na+ ratio being an order of magnitude less than that of normal seawater. Analyses of Na+, K+, Ca2+, Mg2+, SO2-4 and CI-, together with solubility and temperature considerations, show that the sulfate depletion is due to selective precipitation of mirabilite, Na2SO4*10H2O. The location of the inland boundary of brine penetration is closely related to the depth at which the brine en-counters the firn/ice transition. However, a small but measurable migration of brine is still occurring in otherwise impermeable ice; this is attributed to eutectic dissolution of the ice by concentrated brine as it moves into deeper and warmer parts of the McMurdo Ice Shelf.
    Type of Medium: Series available for loan
    Pages: iii, 16 Seiten , Illustrationen
    Series Statement: CRREL Report 83-6
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 84
    Call number: ZSP-201-83/7
    In: CRREL Report, 83-7
    Description / Table of Contents: Peak power generation with hydropower creates tailwater flow conditions characterized by high and low flows with abrupt transitions between these states. Flows occurring in tailwaters typically form sharp-fronted, large-amplitude waves of relatively short period. An understanding of the mechanics of downstream propagation of these waves is important both for direct application in studies of the tailwater and because of the similarity of these waves to those following a dam break. An analysis of the dynamic equations of open channel flow is used to quantify the relative importance of flow wave convection, diffusion and dispersion in rivers. The relative importance of each process is re­lated to the relative magnitude of terms in the dynamic equations, providing a physical basis for model formulation. A one-dimensional diffusion wave flow routing model, modified for tailwaters, simulates the important physical pro­cesses affecting the flow and is straightforward to apply. The model is based upon a numerical solution of the kine­matic wave equation. The “modified equation,” Hirt, and von Neumann analyses are used to gain insight into the stability and dissipative and dispersive behavior of the numerical solution, and results of these analyses are compared. A set of linear routings is used to demonstrate the dissipative and dispersive behavior predicted by the analyses and to verify the accuracy of an expression that quantifies the numerical diffusion of the model. The analyses provide a basis for selection of numerical parameters for model applications. The capability and accuracy of the model are enhanced when physical wave diffusion is balanced by numerical diffusion in the model. Maintaining the diffusion balance re­quires that the time derivative weighting parameter 0 be variable and in some instances negative. Though some amount of phase error is introduced, negative 0 values have no adverse effect upon model stability. Field studies were con­ducted to demonstrate the benefits of careful model development and analysis, and to verify the diffusion wave model for rapidly varying tailwater flow. The bed slope and roughness characteristics of the field study reaches (below Apalachia and Norris Dams) differ greatly, spanning those of a large number of rivers of practical interest. The accurate simulation of flow in both of these tailwaters attests to the soundness of both the physical basis of the model and the numerical solution technique. The field studies confirm, for the extreme case of rapidly varying flow in a mildly sloped river, that inertia has a negligible effect upon unsteady flow waves at low Froude numbers. Additionally, these studies verify that diffusion of short-period waves in rivers is generally significant.
    Type of Medium: Series available for loan
    Pages: vi, 41 Seiten , Illustrationen
    Series Statement: CRREL Report 83-7
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Physical diffusion and dispersion in open channel flow Modeling approach Description of the diffusion wave flow routing model Analysis of the numerical model Modified equation and Hirt analyses of diffusion wave model von Neumann analysis of the diffusion wave model Linear case studies Accuracy considerations of the numerical solution Field studies Apalachia Dam tailwater Norris Dam tailwater Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 85
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/5
    In: CRREL Report, 83-5
    Description / Table of Contents: This report presents the results of dynamic ice-structure interaction model tests conducted at the CRREL Ice Engineering Facility. A flexible, single-pile, bottom-founded offshore structure was simulated by a test pile with about a one-to-ten scale ratio. Urea (instead of sodium chloride) was used as dopant to scale down the ice properties, resulting in good model ice properties. Six ice fields were frozen and 18 tests carried out. In all cases distinctive dynamic ice structure interaction vibrations appeared, from which abundant data were collected. In tests with linear ice velocity sweep, sawtooth-shaped ice force fluctuations occurred first. With increasing velocity the natural modes of the test pile were excited, and shifts from one mode to another occurred. The maximum ice force values appeared mostly with low loading rates, but high forces appeared random'y at high ice velocities. As a general trend, ice force maximums, averages and standard deviations decreased with increasing ice velocities. The aspect ratio effect of the ice force in continuous crushing follows the same dependence as in static loadings. The frequency of observed ice forces is strongly dominated by the natural modes of the structure. Dynamically unstable natural modes tend to make the developing ice force frequencies the same as the natural frequencies. Otherwise the resulting frequency depends directly on structural stiffness and ice velocity and inversely on the ice force range. During vibrations the displacement rates of the structure overcome the velocity of ice, making low loading rates and hence high ice forces possible. During crushing, ice induces both positive and negative damping.
    Type of Medium: Series available for loan
    Pages: iv, 53 Seiten , Illustrationen
    Series Statement: CRREL Report 83-5
    Language: English
    Note: CONTENTS Abstract Preface Introduction Test arrangements Ice properties Crushing patterns Maximum ice force vs velocity Dynamic aspect ratio effect and crushing strength Measured ice force frequencies Calculated ice force frequencies Accelerations, velocities and displacements Damping Ice-induced negative damping Limit cycles Buckling load Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 86
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/2
    In: CRREL Report, 83-2
    Description / Table of Contents: A numerical model of rime ice accretion on an arbitrary two-dimensional airfoil is presented. The physics of the model are described and results are presented that demonstrate, by comparison with other theoretical data and experimental data, that the model predictions are believable. Results are also presented that illustrate the capability of the model to handle time-dependent rime ice accretion, taking into account the feedback between the ice accretion and the airflow and droplet trajectory fields.
    Type of Medium: Series available for loan
    Pages: vi, 81 Seiten , Illustrationen
    Series Statement: CRREL Report 83-2
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Methodology Potential flow around an arbitrary airfoil Incompressible velocity field Droplet trajectory equation Computational procedure for trajectories Determining the point of impact Calculation of collision efficiencies Accreting an ice layer Determining the accuracy of the flow field Determining the accuracy of the trajectories Results and discussion Comparing results with and without the history term Collision efficiency of NACA 0015 airfoil at 8° attack angle Time-dependent accretion on NACA 0015 airfoil at 8° attack angle Time-dependent accretion on NACA 0015 airfoil at 0° attack angle Conclusions and recommendations Literature cited Appendix A : Sample input Appendix B: Sample output Appendix C : Program listing
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 87
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/1
    In: CRREL Report, 83-1
    Description / Table of Contents: Roof snow load case studies gathered throughout the United States over a three-year period are analyzed. The objective of the analysis is to determine a relationship between the snow load on the ground and the corresponding uniform snow load on flat and sloped roofs. The main parameters considered are the thermal characteristics of the roof, the roof slope and the exposure of the structure. Exposure has the strongest effect on the ratio of ground to roof snow loads. Comparisons are made with existing and proposed building codes and standards.
    Type of Medium: Series available for loan
    Pages: iv, 47 Seiten , Illustrationen
    Series Statement: CRREL Report 83-1
    Language: English
    Note: CONTENTS Abstract Preface Metric conversion table Introduction Data base Conversion factor Ground load effects Exposure effects Thermal effects Slope effects Expected value relationship Comparison with existing codes and standards Comparison with relationships proposed in new ANSI standard Summary and conclusions Literature cited Appendix A. Roof snow load case history reports Appendix B. Roofs in the snow load case study data base Appendix C. Ground and roof snow load data Appendix D. Conversion factors from the 1982 ANSI standard
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 88
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/4
    In: CRREL Report, 83-4
    Description / Table of Contents: Measurements and analysis of seasonal ice growth and decay on Post Pond, New Hampshire, for the period 1973-1982 are presented. Observations included ice thickness measurements, examination of the various ice types contributing to the ice cover, and measurements of meteorological parameters for correlation with and modeling of the ice growth process. The overall nature of ice growth and decay (ice loss) on the Post Pond has been ascertained, the seasonal variability in the timing of freeze-up and ice-out and the duration of the ice cover have been determined, and the relationship of ice growth to freezing-degree-day (deg C) records evaluated on the basis of a Stefan conduction equation modified to deal with ice sheets covered with or free of snow. Ice growth occurs predominantly by the direct freezing of lake water, but snow ice may compose as much as 50% of the ice cover in winters with higher than average snowfall. Freeze-up leading to the establishment of a stable ice cover occurs during the 4-week period from the end of November to the end of December. Maximum seasonal ice thicknesses were from 45 to 67 cm and are generally attained during the first two weeks of March; ice-out, marking the final disappearance of ice from Post Pond, usually occurs by the third week of April. The overall rate of the ice loss is three to four times that of ice growth, and is dominated initially by melting from the top. As much as 50% of the ice may be lost in this way before the onset of any bottom melting. Final dissipation of the ice cover is usually expedited by candling resulting from preferential melting and disintegration of the ice at crystal boundaries.
    Type of Medium: Series available for loan
    Pages: iv, 30 Seiten , Illustrationen
    Series Statement: CRREL Report 83-4
    Language: English
    Note: CONTENTS Abstract Preface Introduction Location of study Study methods Ice thickness Ice-cover composition Surface air temperatures Freeze-up and ice-out characteristics Results and discussion Ice-growth record Freezing-degree-day records Ice-growth predictions Summary and conclusions Literature cited Appendix A: Ice-growth records Appendix B: Measured and computed ice-growth curves
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 89
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-87/21
    In: CRREL Report, 87-21
    Description / Table of Contents: The author measured time series of longitudinal (u) and vertical (w) velocity and temperature (t) and humidity (q) fluctuations with fast-responding sensors in the near-neutrally stable surface layer over a snow-covered field. These series yielded individual spectra and u-w, w-t, w-q and t-q cospectra, phase spectra and coherence spectra for nondimensional frequencies (fz/U) from roughly 0.001 to 10. With the exception of the u-w cospectra, all the spectra and cospectra displayed the expected dependence on frequency in an inertial or inertial-convective subrange. All, however, contained significantly more energy at low frequency than the Kansas neutral-stability spectra and cospectra. This excess low-frequency energy and the erratic behavior of the u-w cospectra imply that forested hills bordering the site on two sides were producing disturbances in the flow field at scales roughly equal to the height of the hills, 100 m. The phase and coherence spectra suggest that internal gravity waves were also frequently present, since the atmospheric boundary layer generally had slightly stable stratification. Consequently, at this complex site, turbulence alone determines the spectra and cospectra at high frequency; at low frequency the spectra and cospectra reflect a combination of topographically generated turbulence and internal waves. From the measured temperature and humidity spectra and the t-q cospectra, the author computed refractive index spectra for light of 0.55-micrometer and millimeter wavelengths. The refractive index spectra had shapes like the other scalar spectra: excess energy at low frequency and an inertial-convective subrange at high frequency.
    Type of Medium: Series available for loan
    Pages: v, 50 Seiten , Illustrationen
    Series Statement: CRREL Report 87-21
    Language: English
    Note: CONTENTS Abstract Preface Introduction Measurements Spectra u and w velocity spectra Temperature and humidity spectra Inertial-dissipation estimates Cospectra u-w cospectra w-t and w-q cospectra t-q cospectra Refractive index spectra Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 90
    Call number: ZSP-201-88/1
    In: CRREL Report, 88-1
    Description / Table of Contents: The Cornish-Windsor bridge is the longest covered bridge in the United States and has significant historical value. At a large peak flow, dynamic ice breakup of the Connecticut River can threaten the bridge and cause flood damage in the town of Windsor, Vermont. Throughout the 1985-86 winter we regularly monitored ice conditions, including a midwinter dynamic ice breakup on 27 January. We conducted controlled release tests over the operating range of the turbines at Wilder Dam upstream during both open water and ice cover conditions. These data and observations were analyzed in light of more than 60 years of temperature and discharge records. Our analysis indicates that river regulation presents alternatives for ice management that would minimize the probability of bridge damage and flooding during breakup. The flow can be regulated early in the winter to promote the growth of a stable ice cover, minimizing the total ice production in the reach. In the weeks prior to breakup, sustained releases and above-freezing air temperatures cause melting, weakening and gradual breakup of the ice, greatly reducing the flooding potential. Also, it is possible to produce a controlled ice breakup prior to an imminent natural event at lower stage and discharge. All of these ice control alternatives have associated power production costs.
    Type of Medium: Series available for loan
    Pages: iii, 21 Seiten , Illustrationen
    Series Statement: CRREL Report 88-1
    Language: English
    Note: CONTENTS Abstract Preface Introduction Background Analysis of historical data Field observations Controlled release tests January 1986 ice breakup Connecticut River ice control Minimizing ice production Hydrothermal melting Controlled ice breakup Conclusions Literature cited Appendix A: Detailed ice breakup chronology
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 91
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-88/2
    In: CRREL Report, 88-2
    Description / Table of Contents: While many materials undergo phase change at a fixed temperature, soil systems exhibit a definite zone of phase change. The variation of unfrozen water with temperature causes a soil system to freeze of thaw over a finite temperature range. Exact and approximate solutions are given for conduction phase change of plane layers of soil with unfrozen water contents that vary linearly and quadratically with temperature. The temperature and phase change depths were found to vary significantly from those predicted for the constant-temperature or Neumann problem. The thermal conductivity and specific heat of the soil within the mushy zone varied as a function of unfrozen water content. It was found that the effect of specific heat is negligible, while the effect of variable thermal conductivity can be accounted for by a proper choice of thermal properties used in the constant-thermal-property solution.
    Type of Medium: Series available for loan
    Pages: v, 30 Seiten , Illustrationen
    Series Statement: CRREL Report 88-2
    Language: English
    Note: CONTENTS Abstract Nomenclature Preface Introduction Basic equations Two-zone problems Linear unfrozen water function Quadratic unfrozen water function Three-zone problems Linear unfrozen water function Quadratic unfrozen water function Conclusions Literature cited Appendix A: Derivation of the mushy zone equation Appendix B: Solution of the two-zone problem with a linear t and variable thermal properties
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 92
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-88/11
    In: CRREL Report, 88-11
    Description / Table of Contents: This study assesses the effects of atmospheric icing on broadcast transmission reflections on two mountains- Mount Mansfield in northern Vermont and Mount Washington in New Hampshire. Experience and theory suggest that antenna ice accretions produce large signal reflections. Correlations between reflection coefficients and ice accretions on Rosemount ice detectors adjacent to antennas were low and occasionally negative. The unexpected correlations may be due to factors not measured, such as antenna tuning, ice type and ice location on the antenna system. Other confounding factors may include ice detector performance and methods used to compute antenna ice accretions from the ice detectors.
    Type of Medium: Series available for loan
    Pages: iii, 19 Seiten , Illustrationen
    Series Statement: CRREL Report 88-11
    Language: English
    Note: CONTENTS Abstract Preface Introduction Data sources Study location and icing conditions Icing data Antenna reflection data Data preparation Analyses Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 93
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-88/15
    In: CRREL Report, 88-15
    Description / Table of Contents: The main points covered are: (1)modeling criteria for ships in ice, which must take into account the presence of a solid boundary at the water surface; (2) types of model ice used in various tanks-saline ice, urea-doped ice, EG/AD/S ice and synthetic ice; (3) techniques for growing model ice sheets, and achieving and monitoring the required ice properties; (4) limitations of both model ice and property measurement techniques; (5) model testing procedures for EHP and SHP tests and their limitations; (6) comparison between model test results and available full-scale trials data; (7) existing empirical and analytical or semi-analytical algorithms for predicting ship performance in level ice; (8) current research at CRREL and other research facilities to improve modeling techniques and data interpretation; and (9) novel bow designs for ice-transiting vessels.
    Type of Medium: Series available for loan
    Pages: v, 39 Seiten , Illustrationen
    Series Statement: CRREL Report 88-15
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction General considerations Ice properties Modulus, E Characteristic length, Ic Flexural strength, σf Com pressive strength, σc Shear strength, σs Poisson's ratio, ϑ Fracture toughness, Kic Density, ρi Ice-hull friction factor, fi Model ice Synthetic ice Columnar saline ice Columnar carbamide ice Fine-grained ice EG/AD/S model ice Model test procedures Ice growth and monitoring EHP tests SHP test Test data analysis--comparison with full scale Analysis of test results Comparison with full-scale data Analytical and empirical predictors Empirical predictors Analytical and semi-analytical schemes Current research efforts in ice modeling International cooperative research Ice testing CRREL research on ship-ice interaction Novel icebreaking bow designs Conclusions and final remarks Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 94
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-89/2
    In: CRREL Report, 89-2
    Description / Table of Contents: A brash ice jam in the South Channel of the St. Clair River was profiled in February 1987 using a helicopter-borne short-pulse radar operating in the UHF band near 500 MHz. During the same time, measurements of the brash ice depth and water temperature were made from a Coast Guard icebreaker. The returned radar pulses consisted of a strong coherent reflection from the water surface, preceded (and followed) by incoherent returns from the brash ice. The measured waveform time delays were then converted to mean freeboard height of the brash ice pieces above the water surface. Given the mean freeboard height, an estimate of the total brash ice thickness was made. This estimate was greater than the range of the direct shipboard measurements. The difference is believed due to differences between ice porosity above and below the water line, to melting within the ice and to partial submergence of some of the surface pieces. It is concluded that this technique could be used for mapping relative brash ice depth if the complexities of automating waveform analysis could be overcome.
    Type of Medium: Series available for loan
    Pages: iv, 25 Seiten , Illustrationen
    Series Statement: CRREL Report 89-2
    Language: English
    Note: CONTENTS Abstract Preface Introduction Objectives and procedures Equipment Radar Brash ice probe Temperature measurements St. Clair River ice conditions Results and discussion Thickness and temperature Size distribution Radar survey Discussion of errors Porosity Phase state of the ice Partial submergence of individual pieces Spectra of reflected energy Conclusions and recommendations Literature cited Appendix A: Laboratory verification of surface scattering from a simulated ice jam Appendix B: Display of digitized and processed data
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 95
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-88/20
    In: CRREL Report, 88-20
    Description / Table of Contents: This study develops design criteria for a new sludge dewatering unit operation called a sludge freezing bed. This bed uses natural freeze-thaw to condition the sludge. The total depth of sludge that can be frozen, thawed and dewatered by this process in a year is the main criterion needed for design. Laboratory tests assessed the dewaterability of freeze-thaw conditioned water treatment plant sludge and both anaerobically and aerobically digested wastewater sludges at various depths. Mathematical models for predicting the design depth were developed; values for the input parameters to the models were obtained from the literature or from laboratory and pilot-scale experiments. The dewaterability tests indicated that the depth of sludge that can be applied is not limited by drainability. Up to 2.0 m of each sludge drained in minutes after freeze-thaw conditioning. Except for the aerobically digested sludge, the solids content after drainage is high enough to permit mechanical removal. The physical and thermal characteristics of frozen sludge were found to be equivalent to those of ice. An analysis of the freezing and thawing models reveals that the design of a freezing bed will depend on the duration and intensity of the freezing and thawing seasons.
    Type of Medium: Series available for loan
    Pages: v, 58 Seiten , Illustrationen
    Series Statement: CRREL Report 88-20
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Background Purpose Scope Literature review Fundamentals of freeze separation Applications of freeze separation technology Conclusions Concept development Background Site visits Final concept Dewaterability studies Sludge characteristics Specific resistance and capillary suction time Filtrate quality Drainage tests Drying tests Development of design models Basic energy balance relationship Development of freezing model Development of thawing model Other models Evaluation of sludge input parameters Frozen sludge density, ϱf Layer thickness, ϵ Settled solids fraction, θ Thermal conductivities, Kfs, Kss Latent heat of fusion, L Absorptance, α Freezing point, Tf Summary Evaluation of climatic input parameters Ambient air temperatures, Taf, Tat Insolation, I Convection coefficient, hc Use of models for design Freezing design depth Thawing design depth Validation Example Conclusions anid recommendations Literature cited Appendix A: Sludge freezing at the Salem, New Hampshire, Wastewater Treatment Plant
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 96
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-82/18
    In: CRREL Report, 82-18
    Description / Table of Contents: Snow and ice control on highways has come to rely heavily on the use of sodium chloride to maintain a trafficable surface for unimpeded movement. Empirical approaches have led to a wide range of application rates, some clearly excessive, but justified on the ground of safety and expediency. The combination of environmental degradation from the huge quantities of salt entering the environment, along with the increased cost of salt itself and the cost of its application have spurred the search for more precise knowledge of the proper amount of salt to apply to a pavement, considering a range of environmental, traffic and chemical parameters. Since controlled tests in the field are extremely difficult to make, a circular test track of three test pavements, dense-graded asphaltic concrete (DGA), open-graded asphaltic concrete (DGA) and portland cement concrete (PCC), was constructed in a coldroom. Natural snow and ice were applied to the pavements and an instrumented slipping wheel was driven over the surfaces to generate frictional forces. These forces were measured and then used to evaluate the response to salt application with time for three test temperatures. OGA had the lowest friction values at a temperature near the freezing point, but higher initial values or more rapidly increasing values than DGA and PCC following salt application at the two lower temperatures. Optimum application rate of salt on PCC and DGA lies between 100 and 300 lb/lane mile (LM), and a higher rate resulted in slight or no improvement in friction. DGA showed anomalous results: lower friction for 300 Ib/LM and higher friction for both 100 and 500 Ib/LM.
    Type of Medium: Series available for loan
    Pages: vi, 55 Seiten , Illustrationen
    Series Statement: CRREL Report 82-18
    Language: English
    Note: CONTENTS Abstract Preface Introduction Objectives Background Approach Influencing factors Field factors Laboratory Laboratory trafficking tests Force measurement and coefficient of friction Test tire slip Surface friction gauge Test procedure British portable tester Experimental results Conclusions Recommendations Literature cited Appendix A. Test pavements Appendix B. Pennsylvania State University field study Appendix C. Rochester Institute of Technology field study
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 97
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/31
    In: CRREL Report, 83-31
    Description / Table of Contents: A mathematical model is described that is used to determine the maximum ice conveyance capacity of a river channel. Based upon this model, computer programs were developed that enable the ice discharge to be calculated for steady-state flow conditions. For rivers that have uniform flow, the maximum ice-conveying capacity can be described with a simple function expressed in terms of the size of the ice fragments, channel geometry, and the flow of water in the river. For nonuniform flows, the computer program determines the elevation profile of the surface layer in addition to other flow characteristics, such as the velocity and surface concentration of the ice fragments. The location along this surface profile where the ice conveyance capacity becomes less than the upstream supply is determined and is considered to be the position where a surface ice jam or ice bridge will be formed.
    Type of Medium: Series available for loan
    Pages: iv, 21 Seiten , Illustrationen
    Series Statement: CRREL Report 83-31
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Constitutive relationships Equations of motion Uniform flow Nonuniform flow Ice transport: Uniform flow Symmetric channel Asymmetric channel Ice transport: Nonuniform flow Further considerations Basis for model improvement Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 98
    Call number: ZSP-201-83/32
    In: CRREL Report, 83-32
    Description / Table of Contents: Ice forces on a bridge pier in the Ottauquechee River, in Quechee, Vermont, were measured by installing fourpanels-each capable of measuring forces in the normal and tangential direction - on both sides of a vertical V-shaped pier nose. The measured forces are presented for a short period during an ice run. After the ice run, the thickness and sizes of the ice floes were measured and the compressive strength of the ice was determined in the laboratory from the ice samples collected along the river banks. The water level measurements made at several locations along theriver are also presented for the period of the ice run.
    Type of Medium: Series available for loan
    Pages: ii, 8 Seiten , Illustrationen
    Series Statement: CRREL Report 83-32
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 99
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/33
    In: CRREL Report, 83-33
    Description / Table of Contents: A thermodynamic model has been developed that for the first time describes the entire creep process, including primary, secondary, and tertiary creep, and failure for both constant stress (CSR) tests (σ= const.) and constant strain rate (CSR) tests (ϵ = const.), in the form of a unified constitutive equation and unified failure criteria. Deformation and failure areconsidered as a single thermoactivated process in which the dominant role belongs to the change of entropy. Failure occurs when the entropy change is zero. At that moment the strain rates in CS tests reach the minima and stress in CSR tests reaches the maximum (peak) values. Families of creep (ϵ vs τ) and stress-strain (σ vs ϵ) curves, obtained from uni-axial compression CS and CSR tests of frozen soil, respectively (both presented in dimensionless coordinates), are plotted as straight lines and are superposed, confirming the unity of the deformation and failure process and the validity of the model. A method is developed for determining the parameters of the model, so that creep deformation and the stress-strain relationship of ductile materials such as soils can be predicted based upon information obtained from either type of test.
    Type of Medium: Series available for loan
    Pages: v, 25 Seiten , Illustrationen
    Series Statement: CRREL Report 83-33
    Language: English
    Note: CONTENTS Abstract Nomenclature Introduction Principal relationships Constitutive equation Failure criteria Secondary creep: Flow equations Creep at constant stress (σ = Const.) Creep model Creep strain (σ = Const.) Creep at constant strain rate (ϵ = Const.) Stress-strain relationship Stress/strain/strain rate at failure Test data Preliminary analysis Constant stress tests (σ = Const.) Constant strain rate tests (ϵ = Const.) The principle of superposition Thermodynamic equation of creep Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 100
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/5
    In: CRREL Report, 84-5
    Description / Table of Contents: Diatom species composition and relative abundances were determined for ice cores obtained from Weddell Sea pack ice during the October-November 1981 Weddell Polynya Expedition (WEPOLEX). Ice thickness and salinity indicate that the ice was less than one year old. The predominant ice type (70%) was frazil, which has the capacity to mechanically incorporate biological material through nucleation and scavenging. Diatoms were found throughout the length of the cores. Species showed down-core fluctuations in abundance that appeared to be correlated with changes in ice type. Pennate forms were more abundant than centrics, the average ratio being 16:1. Diatom frustules with intact organic material were more abundant (5 billion cells/liter). Differences in species abundances are attributed initially to incorporation of algal cells from a temporally changing water column and subsequently to diatom reproduction within the ice. Scanning electron micrographs illustrating the morphologic characteristics of the predominant species are included.
    Type of Medium: Series available for loan
    Pages: iv, 46 Seiten , Illustrationen
    Series Statement: CRREL Report 84-5
    Language: English
    Note: Contents Abstract Preface Introduction Materials and methods Results Discussion Conclusions Literature cited Appendix A: Taxonomic terms Appendix B: Differences in species composition and abundance in duplicate samples examined under optical and inverted light microscopes Appendix C: Morphologic descriptions and SEM micrographs
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...