ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
  • 1
    Call number: ZSP-201-87/17
    In: CRREL Report, 87-17
    Description / Table of Contents: The ability to map frazil ice deposits and water channels beneath an ice-covered river in central Alaska using the magnetic induction conductivity (MI) technique has been assessed. The study was performed during the first week of March of 1986 on the Tanana River near Fairbanks and employed a commercially available instrument operating at a fixed frequency with a fixed antenna (coil) spacing and orientation. Comparisons of the MI data with theoretical models based upon physical data measured along three cross sections of the river demonstrate the sensitivity of the MI technique to frazil ice deposits. The conductivity generally derived for the frazil ice deposits encountered is very low (approx. .00063 s/m) when compared with the measured value for water (approx. 0.011 S/m), and is similar to the calculated values for gravel and sandy gravel bed sediments. In all three cross sections, maxima in the apparent conductivity profiles correlated with frazil ice deposits. Difficulties, possibly due to adverse effects of cold weather upon instrument calibration, affected the quantitative performance of the instrument on one cross section, although the interpretation of the data (locations of open channels vs frazil deposits) was qualitatively unaffected.
    Type of Medium: Series available for loan
    Pages: iii, 17 Seiten , Illustrationen
    Series Statement: CRREL Report 87-17
    Language: English
    Note: CONTENTS Abstract Preface Introduction Magnetic induction conductivity method Site description and survey methods Cross section field data and modeling results X6 X3A X4 Conclusions and recommendations Literature cited Appendix A: Discussion of errors Appendix B: Modeling data
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 2
    Call number: ZSP-201-86/11
    In: CRREL Report, 86-11
    Description / Table of Contents: This initial study of the ice-covered Tanana River, near Fairbanks, Alaska, attempted to 1) establish field methods for systematic and repetitive quantitative analyses of an ice-covered river's regime, 2) evaluate the instruments and equipment for sampling, and 3) obtain the initial data of a long-term study of ice cover effects on the morphology, hydraulics and sediment transport of a braided river. A methodology was established, and detailed measurements and samplings, including profiling by geophysical techniques, were conducted along cross sections of the river. A small, portable rotary drill rig equipped with a 356-mm (14-in.) ice auger was used to cut large diameter holes in the ice cover for through-the-ice measurements. Portable heat sources and a heated shelter were required to continuously thaw and dry equipment for the repetitive measurements. Measurements included ice cover thickness, water level, water depth, temperature, flow velocity, suspended load and bed load, frazil ice distribution and bed material composition. Remotely gathered data included apparent resistivity and subsurface radar profiling. The various techniques, sampling gear and problems encountered during use in the subfreezing cold are described in detail in this report.
    Type of Medium: Series available for loan
    Pages: v, 49 Seiten , Illustrationen
    Series Statement: CRREL Report 86-11
    Language: English
    Note: CONTENTS Abstract Preface Introduction Study objectives and field locale Study site Equipment Vehicles Drilling equipment Sampling equipment Geophysical equipment Shelter and icing control Surveying equipment Miscellaneous equipment Field techniques and methodology Logistics Drilling procedures Data collection Geophysical analyses Experiences summary Morphology, transport and hydraulic data Mid-winter physical characteristics Hydraulic characteristics Sediment transport Late winter physical characteristics Seasonal morphology Geophysical data interpretation Spatial morphology Frazil ice characteristics Discussion and conclusions Recommendations Equipment Research Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 3
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-85/1
    In: CRREL Report, 85-1
    Description / Table of Contents: An expensive drill has been modified to provide researchers with the ability to auger an open hole or to acquire continuous, undisturbed 76-mm-diam core samples of a variety of perennially frozen materials that are suitable for chemical and petrographic analysis. It was developed by field testing in support of research from 1980 to 1983. Operation of the drill is based mainly on using a minimum of power to cut through frozen ground with tungsten carbide cutters on a CRREL coring auger. The ice content, temperature and grain size of the frozen sediments are important variables determining the sampling depth. Perennially frozen sediments with temperatures in the range of -0.5 C to -8.5 C have been continuously cored with this drill. Drilling and sampling are most efficiently conducted when ambient air temperatures are below freezing and the active layer is frozen. The self-contained lightweight drill is readily transportable off-road by helicopter or tracked vehicle, or by towing over roads. It is locally self-mobile by use of a winch. Total cost of the drill and modifications is estimated at approximately $10,000.
    Type of Medium: Series available for loan
    Pages: v, 34 Seiten , Illustrationen
    Series Statement: CRREL Report 85-1
    Language: English
    Note: CONTENTS Abstract Preface Introduction Background on development Drill development and configuration Equipment Modifications Operations Assembly and disassembly Field transport and movement Typical operating procedures Effect of material properties, weather and water Depth and hole completion time Summary Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...