ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Articles  (378)
  • Engineering General  (378)
  • Fisheries
  • 1995-1999  (154)
  • 1980-1984  (224)
  • 1925-1929
  • Geosciences  (378)
  • 1
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 4 (1980), S. 103-119 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The spontaneous shear band formation in the biaxial test on dry sand samples with constant cell pressure is treated as a bifurcation problem. The constitutive response of sand is described in terms of mobilized friction and dilatancy. Dilatancy is looked upon as an internal constraint and the hardening rule is expressed in terms of an adequate dimensionless stress measure. Owing to fail of normality in sand, localization always occurs in the hardening regime. The theoretical solution of the shear band inclination is a geometrical mean of the classical Coulomb and Roscoe solutions and is in good agreement with the experimental data. The incipient shear modulus is proportional to the stress level and can be estimated to be also proportional to these cant modulus.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 2
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 4 (1980), S. 175-184 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 3
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 4 (1980), S. 291-292 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 4
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 4 (1980), S. 293-311 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: Hysteretic and viscous material damping are compared in the context of soils. Popular assumptions about damping are shown to lead to different results for the rocking mode of surface foundations at low frequency.
    Additional Material: 14 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 5
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 4 (1980), S. 389-389 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 6
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 7
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 5 (1981), S. 57-78 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The trap-door problem with dry sand is treated in a statical analysis based upon model test kinematics. Integration of the equilibrium conditions along horizontal slices and introducing the mean value for the vertical stresses yields a differential equation for the trap-door force. Concerning the constitutive response of sand a statical model of a moving shear band is proposed as an internal boundary. Solutions for the trap-door force for the active and passive modes and for the ultimate and residual states are discussed.
    Additional Material: 17 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 8
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 4 (1980), S. i 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 9
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 4 (1980), S. 333-359 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The analysis of the stability of slopes using limiting equilibrium considerations necessitates the determination of the critical slip surface which yields the minimal factor of safety. The numerous methods currently available for slope stability analysis provide a procedure for assigning a factor of safety to a given slip surface, but do not consider the problem of identifying the critical conditions.This paper presents an effective minimization procedure based on dynamic programming by which the minimal factor of safety, and the corresponding surface, are determined simultaneously. This procedure SSDP (Slope Stability by Dynamic Programming), couples the minimization scheme with Spencer's method of slope stability analysis. It may be applied to slopes of any geometry, layering, pore pressure and external load distributions. No arbitrary restrictions are placed on the shape of the slip surfaces, and the analysis satisfies all equilibrium equations.Application of the procedure to slope stability problems reported in the literature shows that for a given slip surface the procedure yields factors of safety which are almost identical to those reported, but in every case a more critical slip surface, with a lower factor of safety, may be found.
    Additional Material: 14 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 10
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 4 (1980), S. 361-375 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: A new concept based on the use of a function expressed as a (complete) polynomial expansion in terms of the three invariants of the stress tensor is proposed for deriving yield, failure and plastic potential functions for use in plasticity based constitutive laws. A mathematical interpretation and physical meaning of the proposed concept are provided by using the idea of the singular nature of constiutive matrices in incremental hypoelastic laws. It is suggested that the proposed function and (polynomial) forms of material moduli can be synonymous. A number of specialized forms of the general function are adopted and their values at failure from advanced three-dimensional tests for a number of (geological) media are evaluated. The results indicate the possibility that there exist invariant numbers associated with the functions(s) that may apply to a wide range of materials. Some ideas on implementation of the proposed concept are also presented.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 11
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 5 (1981) 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 12
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 5 (1981), S. 139-163 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: A novel finite element method has been proposed in this paper for the solution of seepage problems economically and accurately. In this method the governing equation and the prescribed boundary conditions are transformed so that they refer to a suitable logarithmically condensed ‘image’ space; the physical problem domain is also mapped into the image space. The transformed equation is then solved in the image space using standard finite elements, subject to the transformed boundary conditions. Because physical space is logarithmically condensed in the image space, the proposed method is capable of dealing with large or very large aspect ratio seepage problems economically and accurately.The validity of the method has been demonstrated by means of a number of examples including anisotropy and non-linearity. In all cases an excellent degree of accuracy was achieved, efficiently and economically.
    Additional Material: 20 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 13
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 6 (1982), S. 77-94 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: It is commonly accepted that the mechanical behaviour of granular masses is strongly affected by their microstructure, namely the relative arrangement of voids and particles, i.e. the granular fabric. Therefore, parameters which characterize the granular fabric are of paramount importance in a fundamental description of the overall macroscopic stresses and deformation measures. In this paper several measures of granular fabric are introduced for a random assembly of spherical granules, using a statistical approach. In particular, a second-order symmetric tensor, Fij, emerges from this consideration, which seems to be of fundamental importance for the description of fabric, and which is closely related to the distribution of the contact normals in the assembly. The relation between fabric measures presented here and those discussed by other investigators is also discussed.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 14
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 6 (1982), S. 141-145 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: A mapping finite element method is proposed for the solution of elastic problems in two-dimensions. This method, based on the logarithmic condensation of physical space, is found to give significantly greater accuracy than when the problem is solved in the physical plane using the standard FEM. Logarithmic condensation of space also permits the solution of large aspect-ratio problems of this type, accurately and economically.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 15
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 6 (1982), S. i 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 16
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 6 (1982), S. 151-171 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: A method for the analysis of the consolidation of a horizontally layered soil under plane conditions is developed. The method depends upon the transformation of the governing equations by a Fourier trasform. This transformation has the effect of reducing the partial differential equations of consolidation to ordinary differential equations. The ordinary differential equations are then solved using a finite layer or finite difference approach. Once the solution in the transformed plane has been found, the actual solution is synthesized by Fourier inversion. The method leads to a considerable reduction in the amount of core storage necessary for solution and enables the solution of quite significant problems to be obtained on a mini-computer.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 17
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 4 (1980), S. 233-254 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: A new one-dimensional model for penetration analysis of a rigid projectile into a soil target is presented. The soil medium is represented by a set of discs of constant thickness, responding in the radial direction under plain strain regime. When penetration through a typical disc occurs, the projectile displaces soil material and a radial plastic shock wave propagates in the disc. The interaction pressure between the projectile and soil material is compatible with the motion of the contact boundary, between them. The instantaneous resistive force is obtained by summation of the contributions of all the discs which are in contact with the nose surface of the projectile. Soil is considered as a ‘floating’ ideally locking material, in which the locking volumetric strain is adjusted to the physical stress-strain properties of the soil material. Friction between projectile and soil is assumed to be negligible. Comparison is made with both twodimensional computer program results and experimental data, and very good agreement is observed. Comparison with other analytical methods reveals that the present model most closely resembles existing experimental results and permits further analysis of the problem as predictions of target response and of stress distribution on the projectile nose. The calculations require very small amounts of computer time. Analysis with the present model yields an efficient and comprehensive means to analyse penetration and perform parameter analysis.
    Additional Material: 20 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 18
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 4 (1980), S. 377-387 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: A new and simple concept based on the idea of correcting for non-associative characteristics of (geologic) media is presented. A special form of the concept is adopted and introduced in a critical state plasticity model. An example problem of behaviour of a soil tested under triaxial conditions is included. The concept can permit a simplified treatment of non-associativeness and under certain assumptions can allow use of existing formulations of plasticity by maintaining symmetry of the associated matrices.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 19
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 5 (1981) 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 20
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 8 (1984) 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 21
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 8 (1984), S. 187-196 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: Localization of deformation in elastic-plastic solids subject to plane strain deformation are investigated numerically. It is shown that the localization may be captured accurately in finite element models by employing (1) the elastic-plastic material stiffness to form the global stiffness, (2) in the case of symmetrical configurations, an imperfection in the form of a weak element, and (3) in the case of incompressible materials, a reduced selective integration scheme which alleviates mesh ‘locking’. Accuracy of the technique is demonstrated by applying it to analyse the classical punch and slope stability problems. Its versatility is illustrated by applying it to analyse finite deformation problems and shear bands formations in associative and non-associative elastic-plastic solids.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 22
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 6 (1982), S. 95-108 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The notion of overall macroscopic stress in granular masses is examined from a fundamental point of view by a statistical consideration of the contact forces that are transmitted by the contacting granules at the microscale. This examination leads in a natural way to relations between the macroscopic stress and the resulting granular fabric. The overall stresses are expressed in terms of the contact forces in two different but complementary ways: (1) by a statistical averaging over the sample volume of contact forces and “branches” which are vectors connecting the centroids of two contacting granules; and (2) by defining the overall tractions transmitted across an interior imagined plane as the sum of the contact forces which represent the mechanical effect of granules on one side of a unit area of this plane, upon those on the other side. Conditions under which the two representations of overall stresses are equivalent, are examined in detail. In addition, explicit results are given, which, define stresses in terms of the fabric and other microstructural characteristics of the granular mass.
    Additional Material: 2 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 23
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 8 (1984), S. 306-308 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 24
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 6 (1982), S. 195-209 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: During the last ten years the Calculus of variations technique has been applied to solve the problem of stability of slopes. All published methods are essentially based on the attainment of a functional and the search for its absolute minimum or maximum by vanishing its first variation.Obviously this statement of the problem is valid only if such a minimum or maximum exists and can be obtained by making the first variation of the functional equal to zero. So, these implicit hypotheses must be checked.This work analyses from this point of view the validity of the methods proposed by ‘Baker and Garber’, ‘Chen’ and ‘Castillo and Revilla’, and demonstrates that the first two methods are incorrectly stated while the third one is correct at least in the case of a frictionless soil.
    Additional Material: 1 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 25
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 8 (1984), S. 513-517 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: A method is devised for measuring soil thermal diffusivity in situ. It is based on direct experimental simulation of the finite difference approximation to the one-dimensional heat conduction equation.The method does not require the soil to be homogeneous except between the three thermometers that are used, at depths z + d, z and z - d. Nor need the energy input curve be sinusoidal. However, it must be fairly smooth for the finite difference approximation to be accurate.Experimental results for London Clay are presented, obtained using thermometers at depths of 1, 6 and 11 cm to give a mean thermal diffusivity of 0.0074 cm2/s at a depth of 6 cm. This value is consistent with other estimates of diffusivity for clay soils.The method is capable of automation, and should be suitable for use on engineering sites, at low cost.The method is capable of generalization to other linear diffusion equations containing one independent parameter. The same limitation also applies to its application to constitutive or geometrical non-linear one dimensional diffusion equations, and each equation requires individual study to assess feasibility of use of the method.The method in effect uses the usual finite difference approximation, not to prepare a numerical solution, but to design an experiment carried out essentially within the finite difference ‘molecule’. The measured parameter of the diffusion equation is the usable product of the method.
    Additional Material: 1 Tab.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 26
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 8 (1984), S. 519-529 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The pressure versus settlement response is highly non-linear for soils, in general. In the present study, a cubic equation of the type p = K1w - K2w3 is suggested to incorporate the non-linear behaviour. A trapezoidal footing with constant depth resting on a subgrade having non-linear response is analysed. The resulting fourth order non-linear differential equation with variable coefficients is solved by using the Galerkin technique and beam characteristic functions are employed to obtain faster convergence. The results are presented in the form of non-dimensional charts for valid ranges of footings and soil parameters.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 27
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 8 (1984), S. 589-604 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The analysis of mechanisms which could control the growth of fractures in non-homogeneous regions is of paramount importance. One such mechanism is the behavior of the fracture as it reaches a frictional interface; coupled with this is the question of re-initiation, e.g. whether a fracture can be contained within the region of initiation. Though the problems of slippage have been dealt with by other investigators, the present paper gives a more comprehensive picture and detailed treatment: effects of various frictional models at an interface are considered for a crack which intersects it at any angle; specialization then allows comparison with existing results in the literature.The problem of re-initiation, after slippage has occurred at a frictional interface, is also considered, using two different models. First, by introducing microcracks in the adjacent stratum and looking at the effects on propagation criteria and, secondly, by examining the actual distribution of the stress tangential to the slip surface; detailed computations are performed and a simple criterion for re-initiation is given, relating the re-initiation stress dominantly to the confining stress on the interface.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 28
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 7 (1983), S. 117-127 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: A coupled finite element-rigid block model for the transient analysis of caverns in jointed media is presented. This coupling permits the modelling of lined openings in a jointed rock mass as well as the propagation of stress waves to the cavern. Both the finite element and the rigid block algorithms employ explicit time integration; an efficient, stable scheme is developed for coupling the two algorithms. Two numerical examples are given: one is a simple validation, the second is a representation of a lined cavern in a sparsely jointed medium.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 29
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 7 (1983) 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 30
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 7 (1983), S. 385-393 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 31
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 7 (1983), S. ii 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 32
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 7 (1983), S. 457-468 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: This paper sets forth the theoretical background and basic numerical expressions for the incorporation of elastic-plastic constitutive equations for ductile rock into a finite element computer code. The derivation of an expression for the total strain rate is performed both for a total stress formulation and for a formulation that employs the concept of effective stress for inelastic behaviour. Specific expressions for the incremental strain rate are presented for the case of a porous material having a quadratic initial yield surface and observing the associated flow rule with a special hardening law for subsequent plastic deformation. A final section of the paper summarizes the expressions required to insert the quadratic yield surface model into a finite element code.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 33
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 6 (1982), S. 491-492 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 34
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 7 (1983), S. 1-7 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The Finite Element Method is frequently used to analyse problems involving an ‘infinite domain’. A typical problem is an underground excavation in prestressed infinite medium in either tunnelling or mining operations or a foundation in an infinite half space.This paper examines the implications of mesh truncation on the accuracy of the accuracy of the solution.At the same time, a more economical and accurate method of analysing these problems using special ‘infinite domain’ Finite Elements is presented.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 35
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 7 (1983), S. 57-74 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The problem of an impervious dam on a poro-elastic foundation is solved analytically. Using the known solution for the fluid pressure in the pores, the elastostatic stress field in the solid skeleton is analysed by reduction to two simpler problems whose solutions can be obtained by complex variable techniques. For welded contact, the rotation of the dam base is then found along with the stresses and strains in the ground. Modification for finite friction along the base is outlined in the appendix.
    Additional Material: 8 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 36
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 7 (1983), S. 269-272 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: This paper corrects an impression, created by a recent contribution to the International Journal for Numerical and Analytical Methods in Geomechanics, that the mathematical equivalence of the direct and indirect boundary element methods for the diffusion equation implies that their respective computational needs with regard to the body integral terms are equal. It is shown that in a stepwise implementation of the numerical procedure for solving a finite body problem, indirect methods requirean integration over an infinite region and not merely over the body as is the case for the direct version.
    Additional Material: 2 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 37
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 7 (1983), S. 286-286 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 38
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 8 (1984), S. 57-70 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The paper deals with the propagation of shock waves at the surface of soils. Heterogeneity and damping are introduced into analytical half-space solutions. The suggested model explains two phenomena, often observed with shock propagation in actual soils, that differ from the behaviour of the homogeneous half-space: the pronounced decay of the disturbances with distance and the elongation of the disturbance into a train of waves. The effects of heterogeneity and damping are discussed quantitatively.The response of footings on heterogeneous soils has been investigated by several authors. Awojobi4 considered the Gibson soil in which the shear modulus increases linearly with depth. Luco5 and Gazetas and Roesset6 investigated a multi-layered soil, the shear modulus being constant within each layer. Gazetas7, using a technique suggested by Gupta8 extended this method to layers with linearly varying shear modulus. Little work is available on the propagation of waves in heterogeneous bodies. Some results concerning the modes and the mode shapes in heterogeneous soils were reported by Ewing, Jardetzky and Press9 and Bath.10 The modes have to be superposed in an appropriate way to obtain the displacement field at the surface. This has been approximately achieved by the finite element formulations of Lysmer, 11, Lysmer and Waas12 and Waas.13 Auersch14 applied this method to a homogeneous layer on a rigid base. He found some dispersion of the Rayleigh wave within a narrow frequency range. Finite elements combined with discrete Laplace transforms, however, consume much computer time. Rao and Goda15 and Rao16 calculated surface vibrations of a half-space with exponentially varying shear modulus and density. Their method is similar to Lamb'S1 procedure for the homogeneous half-space. Only one mode-the Rayleigh wave-occurs in their heterogeneous half-space. The examples show the considerable effect of heterogeneity on wave propagation. In the present paper, more general variations of the shear modulus are considered.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 39
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 8 (1984), S. 141-155 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The stress and deformation resulting from rapidly applied axial traction on the face of a cylindrical cavity in a saturated soil are analysed. A simple rate-type constitutive model is used for the effective stress response.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 40
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 19 (1995), S. 267-288 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The present paper describes the numerical implementation of constitutive relationships previously developed for modelling the elastoplastic behaviour of bolted rockmass regarded as a homogenized anisotropic medium on the macroscopic scale. Attention is more particulary focused on the iterative algorithm involved in such a numerical method, which makes use of projection formulas onto the yield surface. Those formulas are made explicit in the case of a purely cohesive rock material obeying a von Mises yield condition with associated flow rule. Combined with a finite element code, the proposed numerical procedure is then carried out for simulating the advancement of a bolt-supported tunnel and calculating its convergence as the excavation proceeds. The results of this numerical simulation prove to agree perfectly well with those derived from an analytical model, thus validating the proposed numerical scheme. A quantitative study, varying some relevant parameters of the problem (bolt density, length of bolts, delay of placement behind the tunnel facing), is finally undertaken. It points to the versatility of the numerical approach, whose range of applicability can be further extended to various kinds of geotechnical structures reinforced by regularly distributed inclusions.
    Additional Material: 15 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 41
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 19 (1995), S. 331-344 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: A micromechanics model for stress-strain behaviour of brittle rocks has been developed. Microcracking is the mechanism of the non-linear deformation behaviour for brittle rocks in the pre-peak stage. The non-linear behaviour in this stage is simulated by considering the local axial splitting of microcracks. The relationships between the compressive stresses, the growth of microcracks, and the fracture-induced deformation are analytically established. In the post-peak stage the shear faulting predominates the process of deformation, which is simulated by a damage model. This micromechanics model is helpful in understanding the failure process in brittle rocks. The model can be used to simulate the complete stress-strain behaviour of rock. The model simulations are consistent with experimental results.
    Additional Material: 11 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 42
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 20 (1996), S. 73-75 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 43
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 20 (1996), S. 153-154 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 44
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 20 (1996), S. 191-208 
    ISSN: 0363-9061
    Keywords: foundation design ; pavement design ; layer-stiffness technique ; moving strip load ; Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: Analytical determination of stresses and deformations caused by moving loads is vital to foundation and pavement designs. In current applications, moving loads are often approximated to be vertical impact loads. In this work, however, a live load is modelled as a uniform distribution of normal or shear stresses in actual motion. Then, a layer stiffness approach utilizing linear elasticity is followed in determining the surface and interior deformations due to the live load. By superimposing the two solutions for normal and shear surface stresses, the new approach can be made to provide an approximate solution to the problem of evaluating stresses and deformations caused by a wide wheel load rolling on a layered elastic system. Although elastic solutions in general are inadequate to explain the more significant consequences of pore pressure generation and dissipation in the soil subgrade, these results can certainly be useful to examine the shearing effects of wide rolling wheels on the asphalt layer and immediate settlement of the subgrade. It is found that the dynamic effects of a smoothly rolling wide load are significant at relatively low wheel velocities compared to those of shear waves in the subgrade and base.
    Additional Material: 15 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 45
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 19 (1995), S. 1-27 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The principal features involved in the implementation of the double-hardening constitutive law Monot1 into a general purpose computer algorithm called MONICA2,3 are described. These include details of general program structure and of steps taken to overcome problems such as computer storage, computer run-time, algorithm stability and problems associated with the stress-strain singularity which exists at the intersection of the two yield surfaces.
    Additional Material: 21 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 46
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 19 (1995) 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 47
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 19 (1995), S. 79-79 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 48
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 19 (1995), S. 127-148 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: Various computational procedures have from time to time been suggested to solve problems involving strain localization. One of these is adaptive remeshing  -  but here occasional failures were experienced if the original mesh was not suitably aligned. We show in this paper that such failures are mainly due to non-robust formulation of the plasticity problem  -  and illustrate an automatic and generally applicable adaptive procedure on several examples.
    Additional Material: 30 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 49
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 19 (1995) 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 50
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 19 (1995), S. 367-376 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The well-known linear relation between the specific volume and the logarithm of the pressure for the isotropic consolidation has been widely incorporated into elastoplastic constitutive equations of soils. It is, however, indicated in this article that this relation has several physically unaccepted properties. Instead of this relation it is recommended to incorporate the linear relation between both logarithms of the volume and the pressure into constitutive equations, which does not have any of the unrealistic properties.
    Additional Material: 1 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 51
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 19 (1995), S. 415-436 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: A new version of a hypoplastic constitutive equation is presented which is characterized by the introduction of a stress-like internal parameter called back stress. The back stress is a function of the void ratio and of the hydrostatic stress. Using a unique set of material constants, the new constitutive equation describes many aspects of the behaviour of cohesionless soils including the influence of density and stress level. This is demonstrated by a series of verification tests. The determination of the material constants from laboratory tests is described analytically.
    Additional Material: 14 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 52
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 19 (1995) 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 53
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 19 (1995), S. 157-179 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: A general analysis using an incremental elastic, perfectly plastic constitutive stress-strain relationship for poroelastoplastic materials is presented to simulate an opening in a low-permeability friable porous medium under non-isothermal conditions. Analytical solutions are obtained for the stresses and strains around a 2-D plane strain circular borehole. An expansion potential is introduced by combining the strains induced by temperature and pore pressure changes. Steady-state pressures and temperatures are considered, and a non-associated plastic flow rule is applied to calculate plastic strains. Focusing on stress distribution near a circular opening, the classic solutions for those stresses under dry and isothermal conditions are used to compare with the newly derived solution. The general poroelastoplastic effect and the thermal effect on sand production and borehole stability are addressed. We suggest that the knowledge of stress history is critical to achieve adequate solutions for displacement and stress in friable media such as clays, shales and oil sands.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 54
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 19 (1995), S. 345-366 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: A parallel numerical model, employing a finite difference explicit scheme for the analysis of coupled heat and moisture transfer in unsaturated soil, is employed to simulate a laboratory experiment of heating of medium sand. The model, written in a two-dimensional polar co-ordinate formulation, is programmed in the concurrent language Occam and executed on a parallel computing network of transputers. Parallelization is adopted as a means of overcoming computing difficulties, which limited numerical solutions to those at steady state, to enable transient behaviour to be simulated.The parallel algorithm was found to be very efficient, enabling a full solution of transient behaviour to be obtained. An investigation of the ability of the model to accurately simulate the complex, interrelated coupled nature of both two-dimensional transient and steady-state behaviour yielded very good correlation between experimental and numerical results. It can therefore be concluded that overall the results obtained provide confidence in the validity of the approach proposed.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 55
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 19 (1995), S. 399-413 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The motions of fluid and solid phases in saturated porous media are coupled by inertial, viscous and mechanical interactions as described by Biot's equations. A one-dimensional exact analytical solution of the Biot's equations for the completely general solution of the transient problem in saturated, linear, elastic, porous media is presented. The problem is solved by using the Fourier series. The transient response of porous media is shown for typical material properties of a natural granular deposit and for different degrees of viscous coupling. The analytical results show the mechanics of dispersive wave propagation in saturated porous media and they should provide a useful comparison term for the existing numerical solution methods.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 56
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 19 (1995), S. 107-126 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: A neural network approach for the prediction of pile bearing capacity by the stress-wave matching technique is presented. The main advantage of this approach over the traditional manual or automated matching approach is that it avoids the time-consuming process of iterative adjustment. This makes it feasible to determine the static pile capacity in real time in the field. Another benefit of this approach is that as more case histories become available, the neural network can be improved by learning from these new examples.A three-layer back-propagation network is set up to illustrate the capability of the proposed approach for 70 dynamically tested concrete bored piles. A wave equation model developed at the National University of Singapore and coded in the NUSWAP computer program is used to formulate the problem. Up to 14 of the 70 piles (20 percent) are used in training the network. The NUSWAP program is used to generate simulation training examples based on the manually fitted training examples for further training of the network. Different network configurations are examined. The trained network produces results exhibiting good stress-wave matching qualities compared to those obtained by manual fitting. The pile bearing capacities predicted by the two approaches agree very closely. The load-settlement curve and axial load distribution in the pile computed using the network-predicted soil parameters are in good agreement with the field measurements obtained from a maintained load test.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 57
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 19 (1995), S. 153-155 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 58
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 19 (1995), S. 219-226 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: A stable crack extension is a precondition for fracture toughness tests using chevron-notched specimens. The paper analyses the stability problem for crack extension in two chevron-notched specimens suggested by ISRM. Stability factors are calculated with various compliances of testing machine under different loading conditions. It is pointed out that the loading manner, compliance of the testing machine, as well as the specimen configurations have great influence on crack growth stability.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 59
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 19 (1995), S. 229-231 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 60
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 19 (1995) 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 61
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 19 (1995), S. 233-247 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: Dense sands, overconsolidated clays and soft rocks exhibit strain-hardening and strain-softening behaviour in a certain range of confining pressure. The aim of the present paper is to construct a constitutive model of soft rock that can describe not only the strain-hardening behaviour, but also the strain-softening behaviour. An elasto-plastic constitutive model for soft rock is derived by introducing a stress history tensorThe preliminary idea was first reported in the reference, the conference paper16. This paper is a complete version of the theory with interpretations and experimental validations. The model is evaluated through a comparison of the calculated results and the experimental results of tests on sedimentary soft rock (porous tuff). In addition, the applicability of the model to numerical analyses is discussed in relation to the uniqueness of the solution in initial and boundary value problems.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 62
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 19 (1995), S. 249-265 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: This paper presents the results of a numerical simulation of field measured seasonal ground movement. The constitutive model employed was proposed as a practical method of modelling the complex stress/strain behaviour of unsaturated soil. Its use within a consolidation-type analysis is explored here, as a means of assessing its suitability for practical application. Comparisons are given of numerical results and field measured behaviour over a 9 month period of time. Overall good correlation is achieved, covering a series of drying and wetting cycles. Confidence can thus be ascribed to the performance of the constitutive model.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 63
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 19 (1995), S. 289-304 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The propagation of magnetoelastic shear waves in an infinite self-reinforced plate is studied in this paper. The frequency spectrum for SH-modes in the plate is drawn and it is shown that if the dimensionless wave number is real, the branches are hyperbolas while for imaginary wave numbers, they are ellipses. It is also observed that for higher modes, the dimensionless group velocity approaches 9·9754 as the wave number increases. The group velocity is normalized with respect to the phase velocity of shear waves.For a homogeneous and isotropic medium, on the other hand, the dimensionless group velocity approaches unity. So it is approximately 10 times larger in case of magnetoelastic shear waves in an infinite self-reinforced plate.It is also noted that in a reinforced medium, if both the values of the coupling parameter and the angle at which the wave crosses the primary magnetic field are increased, the values of the dimensionless frequency and group velocity are decreased.
    Additional Material: 12 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 64
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 20 (1996), S. 143-152 
    ISSN: 0363-9061
    Keywords: settlement ; axially loaded ; circular ; piles ; piers ; drilled shafts ; caissons ; numerical model ; variational principles ; Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: A variational model for the analysis of axially loaded piers is presented. A closed-form solution technique employing an iterative procedure, is developed to obtain the displacement and forces in the pier along its axial direction. The method is suitable for similar analyses of pile foundations. It is shown that displacements and the load distribution along the axis of the pier compare well with a more sophisticated finite element solution. Furthermore, the new model complements the well-known Reese model employing t-z curves for the analysis of settlement of axially loaded piers. This new formulation using continuum mechanics principles, distributes the work done by the applied load as compressive strain energy in the pier, and as shear strain energy in the soil, as well as, the compressive strain energy in the soil surrounding the pier and at the bottom of the pier.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 65
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 20 (1996), S. 77-77 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 66
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 20 (1996), S. 173-190 
    ISSN: 0363-9061
    Keywords: stress/stability analysis ; constitutive modelling ; non-linear fault behaviour ; Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: A boundary element model for stress/stability analysis of underground excavations in the vicinity of faults is presented. The boundary element formulation adopts the fictitious stress method for the simulation of excavation boundaries and the displacement discontinuity method for the representation of faults. The numerical model employs the Barton-Bandis non-linear joint model for the modelling of the fault behaviour and linear elastic behaviour for the rock. An incremental-iterative in situ stress relaxation algorithm is implemented for the non-linear analysis of the faults. Both deformation and peak strength models of Barton-Bandis are incorporated for modelling the mechanical behaviour of the fault. The non-linear deformation of fault considers the effects of coupling between shear and normal stresses and displacement, joint closure, joint separation, hardening followed by post-peak or residual behaviour. The peak strength model employs a mobilized non-linear shear strength envelope. The differences between linear and non-linear simulation of the fault models are discussed. A comparison of model predictions with the classical Mohr-Coulomb peak strength model with constant joint stiffness is presented. The numerical model is used for a case study of Canadian hard rock underground mine. The shear and normal displacements along the fault during four mining sequences with backfill simulation are presented and discussed.
    Additional Material: 16 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 67
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 20 (1996), S. 229-230 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 68
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 20 (1996), S. 253-273 
    ISSN: 0363-9061
    Keywords: elastic porous media ; wave propagation ; first-order silent boundary technique ; Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: Wave propagation both in one- and in two-dimensional saturated elastic porous media is analysed by means of a two-field finite element model with silent boundaries. An extension of the elastic ‘multidirectional’ transmitting boundary to two-phase media is developed to simulate the silent boundary condition. The theoretical assessment and the numerical formulation of the first-order silent boundary technique is presented in detail. Some examples are used to demonstrate the reliability of the first-order method, especially for problems with plane and axisymmetric waves having various angles of incidence. Finally, the wave propagation along a pile shaft is presented, to simulate a common non-destructive dynamic pile test.
    Additional Material: 12 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 69
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 20 (1996), S. 287-294 
    ISSN: 0363-9061
    Keywords: torsional surface waves ; propagation ; hoterogeneous half-space ; Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The paper discusses the propagation of torsional surface wave in a homogeneous substratum over a half-space with linearly varying rigidity and density. The study reveals that under assumed conditions, a torsional surface wave propagates in the medium. The velocities of torsional surface waves have been calculated numerically and are presented in a number of graphs. It is also observed that for a stratum over a homogeneous half-space, the velocity of torsional surface waves coincides with that of Love waves. For a non-homogeneous half-space it is observed that the velocity of torsional surface waves is always higher than that of Love waves propagated in a homogeneous layer over a homogeneous half-space. An attempt is also made to assess the possible propagation of torsional surface waves in a half-space with linearly varying rigidity and density, lacking a superficial layer. It is concluded that such a half-space allows two solutions for torsional waves while a homogeneous half-space has one.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 70
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 20 (1996), S. 381-401 
    ISSN: 0363-9061
    Keywords: Poroelasticity ; FEM ; borehole ; anisotropy ; rock mechanics ; Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The finite element equations for non-linear, anisotropic poroelasticity are cast in the form of measurable engineering constants. Two problems of importance to the rock and petroleum industry are analysed by the FEM. First, the classical Mandel's problem with an extension to transversely isotropic case is investigated. Second, the problem of an inclined borehole is explored. In particular, the effect of material anisotropy on stress concentration near the wall with implication to borehole instability is examined in detail.
    Additional Material: 17 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 71
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 20 (1996) 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 72
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 20 (1996), S. 489-516 
    ISSN: 0363-9061
    Keywords: cavity expansion ; critical state models ; plasticity ; pile installation ; normally and overconsolidated clays ; Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: Boundary value problems for hardening/softening soils, such as Cam-Clay, usually require the extensive use of finite element methods. Here analytical and semi-analytical solutions for the undrained expansion of cylindrical and spherical cavities in critical state soils are presented. The strain is finite, the initial cavity radius is arbitrary and the procedure applicable to any isotropically hardening materials. In all cases only simple quadratures are involved, and in the case of the original Cam-Clay a complete analytical solution can be found. In addition to providing models of the behaviour of displacement piles and pressuremeters these results also provide valuable benchmark solutions for verifying various numerical methods.
    Additional Material: 24 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 73
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 20 (1996), S. 595-604 
    ISSN: 0363-9061
    Keywords: compressibility ; elastic settlement ; geosynthetic-reinforced soil ; mechanical foundation model ; prestressing ; Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: In the present paper, a new foundation model has been proposed by introducing a stretched rough elastic membrane in the Pasternak shear layer sandwiched between two spring layers which is an extension of Kerr model. Considering the equilibrium of different elements, the equations governing the elastic settlement response of the model are derived. Finite difference scheme has been employed to solve the governing equations. The parametric studies carried out show the effect of several parameters on the elastic settlement response of the model. The proposed model is well suited for idealizing the behavior of geosynthetic-reinforced granular fill - soft soil system besides other applications.
    Additional Material: 8 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 74
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 20 (1996), S. 571-593 
    ISSN: 0363-9061
    Keywords: methane gas ; finite element ; coal mining ; diffusion ; adsorption ; outbursts ; Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: This paper presents the development of a mathematical model for methane gas migration in coal seams. The major focus of this model is the coupling between the gas flow and deformation of solid coal. The effect of diffusion of adsorbed methane gas from the solid matrix to the voids has been taken into account. The adsorption of gas in the coal seam causes a two-phase state of gas flow. The governing equation for the two-phase gas flow is a non-linear partial differential equation with non-linear boundary conditions. A finite element model has been developed for simulation of the distribution of pressure and concentration of methane gas due to gas migration in coal seams.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 75
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 20 (1996), S. 673-690 
    ISSN: 0363-9061
    Keywords: tunnel analysis ; new implicit method (NIM) ; Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: Tunnel excavation is a coupled three-dimensional problem dealing with two different structures: lining and rockmass. For a simple application it is useful to develop simplified methods by treating the problem as plane strain.If the problem of tunnel face advance presents an axisymmetric geometry, then we show that the major parameter governing the ground-interface-lining interaction is the convergence of the tunnel U0 at the moment of the lining installation.The ‘New Implicit Method’ (NIM) presented in this paper makes use of principles similar to those of the ‘convergence-confinement’ method, but it provides a better appreciation of the coupled behaviour of rockmass and lining. For independent time constitutive laws (elasticity and plasticity), we point out that the convergence U0 depends not only on the mechanical behaviour of the rockmass and on the distance from the tunnel face, as predicted by the ‘convergence-confinement’ method, but also on the stiffness of the lining previously set.We present the ‘NIM’ for elastic and perfect elastoplastic rockmasses without dilatancy for many criteria. The development of this new method is based on the results of tunnel calculations with an axisymmetric FEM numerical model that takes into account the three-dimensional aspect of the problem.Using this method is simple and its results agree well with the FEM numerical results. Its accuracy is highly satisfactory for a geotechnical study.
    Additional Material: 16 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 76
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 20 (1996), S. 693-713 
    ISSN: 0363-9061
    Keywords: unfrozen layer ; osmotic ; diffusion ; transport ; moisture ; temperature ; optimization ; Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: Two series of freezing column tests with distilled water and municipal solid waste leachate were investigated, using illitic silty clay. Temperature distributions along the freezing column were recorded as a function of distance and time. Unfrozen moisture content and osmotic pressures as a function of temperature were calculated.It was shown that temperature distributions as a function of distance and time were similar in all tests, probably as a result of the limited amount of moisture intake. The amount of moisture intake was directly related to freezing time and temperature gradient in the freezing column. Unfrozen moisture contents, ion concentrations and temperature gradients were identified as the controlling parameters that contributed to the boundary layer transport (BLT) of metal ions in frozen specimens. Na+ concentration profiles were mostly dependent on water movement in the freezing column. The behaviour of Ca2+ and Mg2+ cations was similar to Na+; their concentrations in the soil solution decreased with freezing time due to ion exchange.Temperature, moisture content in an unfrozen boundary layer (UBL), and concentration gradient were taken into consideration in the development of a boundary layer transport model (BLTM). Based on the experimental results and Powell's optimization technique, the diffusivity parameters of various metal ions were calculated. Comparison of experimental and predicted results indicated that the BLTM can predict the migration of metal ions in UBL.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 77
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 20 (1996), S. 725-751 
    ISSN: 0363-9061
    Keywords: damage mechanics ; earthquakes ; gravity dam ; damage evolution ; absorbing boundary ; anisotropic behaviour ; Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: In this paper, the seismic response analysis of concrete gravity dams is presented using the concept of Continuum Damage Mechanics. The analysis is performed using the finite element technique and a proper material degradation/damage model. The damage criterion used here is a second order tensor model based on elastic-brittle characterization and on a power function of the principal tensile stress. The methodology employed is shown to be computationally efficient and consistent in its treatment of both damage growth and propagation. Other important features considered in the analysis are: (1) dam-foundation interaction (2) appropriate modelling of joined rock mass using continuum damage mechanics, and (3) proper modelling of unbounded domain of foundation rock. The infinite media representation of the foundation material has been achieved by using doubly asymptotic approximation. The results of the analysis indicate that the seismic response of a damaged concrete dam could be significantly different from that of an undamaged one. In particular, the analysis shows that during a seismic event, the microstructure of a damaged zone can significantly change due to growth and propagation of microcracks.
    Additional Material: 18 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 78
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 20 (1996), S. 831-844 
    ISSN: 0363-9061
    Keywords: double porosity ; consolidation ; fissured material ; coupled problems ; Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The mathematical base of the double porosity concept, consisting of the continuity and equilibrium equation respectively, is briefly reviewed. A quasi-steady-state transfer function, the so-called leakage term, is used. Important aspects of the developed code, based on the double porosity theory, are presented together with two hypothetical example problems. The resulting trend of the settlements are compared to those from previous work and was found to be significantly different. However, the implications are that the present study exhibits a more realistic prediction for the settlement.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 79
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 20 (1996), S. 907-908 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: No Abstract
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 80
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 20 (1996), S. 887-905 
    ISSN: 0363-9061
    Keywords: creep ; modelling ; long-term ; triaxial ; drainage ; marine clay ; Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: A new finite element program is introduced and its predictive capabilities are compared to results from two long-term, drained laboratory creep tests on a deep sea clay. The constitutive behaviour is based on Cam clay critical state plasticity theory with creep and time-dependent hardening. Creep is computed using either Singh-Mitchell's three-dimensional equation or Taylor's secondary compression relationship. The experimental creep data include a triaxial specimen subjected to two deviatoric stress increments and a one-dimensional consolidation specimen subjected to three vertical stress increments. In addition, the pore pressure behaviour following an increase in stress is examined in the triaxial sample. Predictions compare favourably to test data, which provide confidence for applying the chosen constitutive model and numerical formulation to solve seabed-related problems on the continental slope that are of interest to geologists, the oil industry and the navy, among others.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 81
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 4 (1980) 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 82
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 4 (1980), S. 121-129 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: This paper examines the problem of the eccentric loading of a rigid circular disc-shaped foundation embedded in bonded contact with an istropic elastic medium of infinite extent. The solution of this problem is achieved by using a Hankel integral transform technique which reduces the problem to two sets of dual integral equations. These systems of dual integral equations represent the equations which govern the axisymmetric and asymmetric states of deformation induced by the loaded foundation. Explicit results are derived both for the displacement and rotation of the circular foundation and for the contact stress at the interface.
    Additional Material: 1 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 83
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 5 (1981), S. 345-368 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: A method allowing for the presence of infinitely distant boundaries in prismatic bodies is developed. The method is closely related to the consistent boundary concept used in dynamic applications but the development presented is algebraic and context free and is thus applicable to a wide variety of geotechnical problems both static and dynamic.
    Additional Material: 14 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 84
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 5 (1981), S. 455-457 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 85
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 5 (1981), S. 460-461 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 86
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 87
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 6 (1982), S. 1-20 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The paper studies certain dynamic characteristics of soil deposits with wave velocities increasing with depth according to (1 + μz)m, where m = 1, 2/3, 1/2, 1/4 and 0. Analytical solutions are presented for the fundamental periods, mode shapes and amplification functions due to vertically propagating shear waves and the effects of type (m) and rate (μ) of heterogeneity are systematically investigated. The analytical-numerical techniques are used to study the attenuation with depth in a deposit of the vertical and horizontal displacements due to travelling of Rayleigh waves. Differences attributed to different heterogeneities are discussed in connection with the machine isolation problem and the steady-state vibration technique for soil exploration. Finally, the dependence on soil heterogeneity of the time-distance response curves, obtained during seismic refraction surveys, is graphically illustrated.
    Additional Material: 12 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 88
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 4 (1980), S. 1-23 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: One major problem encountered when using the finite element method to simulate the load-deformation behaviour of an elasto-plastic soil mass is that the theoretical collapse load is generally exceeded, and in some cases the numerical solution fails to exhibit a collapse load. A mixed variational principle is used as the basis for developing the governing equations of deformation and the results from this are compared with those obtained from the use of the virtual power equation. The former is found to give improved results and is generalized to include description of finite deformation. An Eulerian frame of reference is used. The method of approximating configuration changes in the numerical solution procedure is found to determine the shape of the load-deformation curve. Finally, a simple method of accounting for anisotropy of yield is presented.
    Additional Material: 14 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 89
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 4 (1980), S. 73-88 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: We continue our study of the consolidation of inhomogeneous clay soils with an analysis of the response of a soil mass, whose shear modulus increases linearly with depth, to axially symmetric pressure on its surface. This extends the work reported in Part I on the corresponding one-dimensional problem of a clay column, and generalizes researches of Gibson and coworkers on the elastic model of the soil (i.e., the initial response).Because of great mathematical complexity when Poisson's ratio is allowed to assume arbitrary values, we have confined ourselves (as did Gibson in several of his papers) to variations of the modulus from a zero surface value, this being in reasonable accord with published test results on London clay. The deflection of points within this region, the deflection relative to the central one (that is, the shape of the deformed loading area), as well as the absolute deflection of surface points exterior to the load.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 90
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 4 (1980), S. 57-72 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The settlement and excess pore pressure are calculated for a column of water-saturated clay in which the permeability and/or shear modulus vary with depth. Several fairly general laws of variation are investigated. In each case, the soil is assumed to have a permeable top surface and to rest on an impervious substrate.For all the variations examined, in which the shear modulus increases with depth below the surface but the permeability of the soil remains constant, the deflection at a given instant after imposition of the load decreases and the degree of settlement increases with increasing rate at which the change with depth takes place. It is found that, when the variation over the height of the column is one order of magnitude or less, the curve of degree-of-consolidation versus time is reasonably wellapproximated by the curve for a homogeneous soil whose modulus equals the depth-averaged value. When, in addition, the permeability decreases with depth, the approximation becomes less accurate.The same approximation, for moderate increase in shear modulus with depth, predicts satisfactorily the process of dissipation of excess pore pressure at a given depth, but breaks down when the variation in modulus is large.Finally, it is shown that the effect of variable modulus on the settlement is greater than of a comparable variation in permeability.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 91
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 7 (1983), S. 39-55 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The theory of consolidation is extended to partly saturated clay soils, and formulated for finite element analyses. This formulation couples the effects of both stress and flow. It takes account of variations of this permeability of the soil and compressibility of the pore fluid with changes in void ratio, and the non-linear stress-strain behaviour of soil. The Cam Clay model is revised to model the stress-strain behaviour of compacted soils. The compressibility of pore fluid is derived using Boyle's Law and Henry's Law, taking into account the effect of surface tension. An empirical equation is developed for permeability of pore fluid. An example of settlement of a footing on partly saturated soil is described and discussed.
    Additional Material: 11 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 92
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 7 (1983) 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 93
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 7 (1983), S. 245-268 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: Using the correspondence principle of viscoelasticity the Displacement Discontinuity Method has been extended to model the rate-dependent behaviour of a jointed rock mass. The intact rock is assumed to behave as a linear viscoelastic material while, in general, a non-linear rate-dependent behaviour of the rock joints can be accounted for. A number of numerical examples are presented which illustrate the accuracy and potential of the method for analysing complex engineering problems.
    Additional Material: 22 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 94
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 7 (1983), S. 273-281 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: In many cases the analysis of the consolidation of axi-symmetric bodies subjected to non axi-symmetric loading may be carried out without recourse to a full three-dimensional treatment. Advantage may be taken of the axi-symmetric nature of the body and field quantities such as displacement and pore pressure can be given a Fourier representation. The problem is then reduced from one in three spatial dimensions (r, θ, z) and the time domain to one in two spatial dimensions (r, z) and the time domain.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 95
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 7 (1983), S. i 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 96
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 7 (1983), S. 337-356 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: A theory describing plastic deformation of granular (purely frictional) materials is presented. The theory is developed from postulates for energy dissipation and for the mode of plastic deformation. The postulates are based on some restrictions for the properties of granular materials and on a frictional analogy. A distinction is made between the description of plastic behaviour of a locally homogeneous and a locally non-homogeneous material. An interpretation of the deformation process is presented which implies that the theory accounts for the changes in the density of some local non-homogeneities underlying a plastic hardening effect. Based on this interpretation, an analogy between elastic-plastic behaviour of granular materials and frictional, sliding of two solid bodies is assumed. In the general case, the presented constitutive equations describe two hardening (softening) effects and are capable of describing both initial and advanced plastic deformations. A special, simplest form of the constitutive equations is examined in detail and a yield condition and a stress-strain relationship are derived. An example of elastic-plastic stress-strain-strength behaviour is presented for the cuboidal loading conditions.
    Additional Material: 12 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 97
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 7 (1983), S. 395-395 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 98
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 7 (1983), S. ii 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 99
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 7 (1983), S. 435-455 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: The consolidation problem in a plane strain porous elastic medium is treated by adopting a consistent formulation of the finite element model. To this purpose, the fluid-phase behaviour is modelled in static terms through a piecewise linear description of the pore pressure field and the behaviour of the two-phase medium is consistently modelled through rigorously equilibrated piec̰ewise linear stress distribution.Incompressibility of the pore fluid and of the skeleton grains is assumed, as is linear elastic behaviour of the solid phase.After a compact description of the model, the governing equations for the continuum problem are recalled and the solution system for the discretized problem is obtained following Galerkin's method of weighted residuals. Some examples are finally illustrated, in order to assess the reliability of the approach and to introduce possible comparisons with other methods.
    Additional Material: 12 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 100
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    International Journal for Numerical and Analytical Methods in Geomechanics 7 (1983), S. 371-384 
    ISSN: 0363-9061
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Architecture, Civil Engineering, Surveying , Geosciences
    Notes: A simple friction-contact interface element is introduced which simulates frictional slippage, separation, and re-bonding of two bodies initially mating at a common interface and subsequently deforming with an arbitrary static loading schedule. Constraint equations between initially mating node pairs and the general principle of virtual work are used to formulate the interface element for a finite element solution procedure. Some advantages of the interface element include; easy implementation intostandard finite element programs, direct determination of interface forces without round-off problems, and the generality afforded by the virtual work formulation to include other non-conservative models in the system.The application of the interface element to an idealized buried culvert problem illustrates that the model behaves properly. A second application, for a long-span culvert installation with incremental soil loading, demonstrates the importance of modelling slippage at the culvert-soil interface in order to conform with experimental observations.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...