ALBERT

Description: This paper presents the results of the correlation analysis of the Skylab S-193 13.9 GHz Radiometer/Scatterometer data. Computer analysis of the S-193 data shows more than 50 percent of the radiometer and scatterometer data are uncorrelated. The correlation coefficients computed for the data gathered over various ground scenes indicates the desirability of using both active and passive sensors for the determination of various Earth phenomena.

Description: The Challenge Awards are designed to provide a unique perspective to students gifted in the arts and humanities from which to understand scientific endeavor by giving students an opportunity to participate in an ongoing research project. In the graduate program, seven students who had participated in previous Challenge Awards programs were selected to help develop the tools for Earth observations for the astronauts on the Space Radar Laboratory (SRL) missions. The goal of the Challenge Awards program was to prepare a training manual for the astronauts on the SRL missions. This paper describes the observations to be made by the astronauts on the SRL missions. The emphasis is on the dynamic seasonal features of the Earth's surface and atmosphere which justify the need for more than one flight of the SRL. Complete notebooks of the sites, global seasonal patterns, examples of radar and the Measurement of Air Pollution from Satellites data, and shuttle photographs have been given to each of the SRL crews.

Description: MacSigma0 is an interactive tool for the Macintosh which allows you to display and make computations from radar data collected by the following sensors: the JPL AIRSAR, ERS-1, JERS-1, and Magellan. The JPL AIRSAR system is a multi-polarimetric airborne synthetic aperture radar developed and operated by the Jet Propulsion Laboratory. It includes the single-frequency L-band sensor mounted on the NASA CV990 aircraft and its replacement, the multi-frequency P-, L-, and C-band sensors mounted on the NASA DC-8. MacSigma0 works with data in the standard JPL AIRSAR output product format, the compressed Stokes matrix format. ERS-1 and JERS-1 are single-frequency, single-polarization spaceborne synthetic aperture radars launched by the European Space Agency and NASDA respectively. To be usable by MacSigma0, The data must have been processed at the Alaska SAR Facility and must be in the "low-resolution" format. Magellan is a spacecraft mission to map the surface of Venus with imaging radar. The project is managed by the Jet Propulsion Laboratory. The spacecraft carries a single-frequency, single-polarization synthetic aperture radar. MacSigma0 works with framelets of the standard MIDR CD-ROM data products. MacSigma0 provides four basic functions: synthesis of images (if necessary), statistical analysis of selected areas, analysis of corner reflectors as a calibration measure (if appropriate and possible), and informative mouse tracking. For instance, the JPL AIRSAR data can be used to synthesize a variety of images such as a total power image. The total power image displays the sum of the polarized and unpolarized components of the backscatter for each pixel. Other images which can be synthesized are HH, HV, VV, RL, RR, HHVV*, HHHV*, HVVV*, HHVV* phase and correlation coefficient images. For the complex and phase images, phase is displayed using color and magnitude is displayed using intensity. MacSigma0 can also be used to compute statistics from within a selected area. The statistics computed depend on the image type. For JPL AIRSAR data, the HH, HV, VV, HHVV* phase, and correlation coefficient means and standard deviation measures are calculated. The mean, relative standard deviation, minimum, and maximum values are calculated for all other data types. A histogram of the selected area is also calculated and displayed. The selected area can be rectangular, linear, or polygonal in shape. The user is allowed to select multiple rectangular areas, but not multiple linear or polygonal areas. The statistics and histogram are displayed to the user and can either be printed or saved as a text file. MacSigma0 can also be used to analyze corner reflectors as a measure of the calibration for JPL AIRSAR, ERS-1, and JERS-1 data types. It computes a theoretical radar cross section and the actual radar cross section for a selected trihedral corner reflector. The theoretical cross section, measured cross section, their ratio in dBs, and other information are displayed to the user and can be saved into a text file. For ERS-1, JERS-1, and Magellan data, MacSigma0 simultaneously displays pixel location in data coordinates and in latitude, longitude coordinates. It also displays sigma0, the incidence angle (for Magellan data), the original pixel value (for Magellan data), and the noise power value (for ERS-1 and JERS-1 data). Grey scale computed images can be saved in a byte format (a headerless format which saves the image as a string of byte values) or a PICT format (a standard format readable by other image processing programs for the Macintosh). Images can also be printed. MacSigma0 is written in C-language for use on Macintosh series computers. The minimum configuration requirements for MacSigma0 are System 6.0, Finder 6.1, 1Mb of RAM, and at least a 4-bit color or grey-scale graphics display. MacSigma0 is also System 7 compatible. To compile the source code, Apple's Macintosh Programmers Workbench (MPW) 3.2 and the MPW C language compiler version 3.2 are required. The source code will not compile with a later version of the compiler; however, the compiled application which will run under the minimum hardware configuration is provided on the distribution medium. In addition, the distribution media includes an executable which runs significantly faster but requires a 68881 compatible math coprocessor and a 68020 compatible CPU. Since JPL AIRSAR data files can be very large, it is often desirable to reduce the size of a data file before transferring it to the Macintosh for use in MacSigma0. A small FORTRAN program which can be used for this purpose is included on the distribution media. MacSigma0 will print statistics on any output device which supports QuickDraw, and it will print images on any device which supports QuickDraw or PostScript. The standard distribution medium for MacSigma0 is a set of five 1.4Mb Macintosh format diskettes. This program was developed in 1992 and is a copyrighted work with all copyright vested in NASA. Version 4.2 of MacSigma0 was released in 1993.

Description: VICAR (Video Image Communication and Retrieval) is a general purpose image processing software system that has been under continuous development since the late 1960's. Originally intended for data from the NASA Jet Propulsion Laboratory's unmanned planetary spacecraft, VICAR is now used for a variety of other applications including biomedical image processing, cartography, earth resources, and geological exploration. The development of this newest version of VICAR emphasized a standardized, easily-understood user interface, a shield between the user and the host operating system, and a comprehensive array of image processing capabilities. Structurally, VICAR can be divided into roughly two parts; a suite of applications programs and an executive which serves as the interfaces between the applications, the operating system, and the user. There are several hundred applications programs ranging in function from interactive image editing, data compression/decompression, and map projection, to blemish, noise, and artifact removal, mosaic generation, and pattern recognition and location. An information management system designed specifically for handling image related data can merge image data with other types of data files. The user accesses these programs through the VICAR executive, which consists of a supervisor and a run-time library. From the viewpoint of the user and the applications programs, the executive is an environment that is independent of the operating system. VICAR does not replace the host computer's operating system; instead, it overlays the host resources. The core of the executive is the VICAR Supervisor, which is based on NASA Goddard Space Flight Center's Transportable Applications Executive (TAE). Various modifications and extensions have been made to optimize TAE for image processing applications, resulting in a user friendly environment. The rest of the executive consists of the VICAR Run-Time Library, which provides a set of subroutines (image I/O, label I/O, parameter I/O, etc.) to facilitate image processing and provide the fastest I/O possible while maintaining a wide variety of capabilities. The run-time library also includes the Virtual Raster Display Interface (VRDI) which allows display oriented applications programs to be written for a variety of display devices using a set of common routines. (A display device can be any frame-buffer type device which is attached to the host computer and has memory planes for the display and manipulation of images. A display device may have any number of separate 8-bit image memory planes (IMPs), a graphics overlay plane, pseudo-color capabilities, hardware zoom and pan, and other features). The VRDI supports the following display devices: VICOM (Gould/Deanza) IP8500, RAMTEK RM-9465, ADAGE (Ikonas) IK3000 and the International Imaging Systems IVAS. VRDI's purpose is to provide a uniform operating environment not only for an application programmer, but for the user as well. The programmer is able to write programs without being concerned with the specifics of the device for which the application is intended. The VICAR Interactive Display Subsystem (VIDS) is a collection of utilities for easy interactive display and manipulation of images on a display device. VIDS has characteristics of both the executive and an application program, and offers a wide menu of image manipulation options. VIDS uses the VRDI to communicate with display devices. The first step in using VIDS to analyze and enhance an image (one simple example of VICAR's numerous capabilities) is to examine the histogram of the image. The histogram is a plot of frequency of occurrence for each pixel value (0 - 255) loaded in the image plane. If, for example, the histogram shows that there are no pixel values below 64 or above 192, the histogram can be "stretched" so that the value of 64 is mapped to zero and 192 is mapped to 255. Now the user can use the full dynamic range of the display device to display the data and better see its contents. Another example of a VIDS procedure is the JMOVIE command, which allows the user to run animations interactively on the display device. JMOVIE uses the concept of "frames", which are the individual frames which comprise the animation to be viewed. The user loads images into the frames after the size and number of frames has been selected. VICAR's source languages are primarily FORTRAN and C, with some VAX Assembler and array processor code. The VICAR run-time library is designed to work equally easily from either FORTRAN or C. The program was implemented on a DEC VAX series computer operating under VMS 4.7. The virtual memory required is 1.5MB. Approximately 180,000 blocks of storage are needed for the saveset. VICAR (version 2.3A/3G/13H) is a copyrighted work with all copyright vested in NASA and is available by license for a period of ten (10) years to approved licensees. This program was developed in 1989.

Description: The Interactive Image Display Program (IMDISP) is an interactive image display utility for the IBM Personal Computer (PC, XT and AT) and compatibles. Until recently, efforts to utilize small computer systems for display and analysis of scientific data have been hampered by the lack of sufficient data storage capacity to accomodate large image arrays. Most planetary images, for example, require nearly a megabyte of storage. The recent development of the "CDROM" (Compact Disk Read-Only Memory) storage technology makes possible the storage of up to 680 megabytes of data on a single 4.72-inch disk. IMDISP was developed for use with the CDROM storage system which is currently being evaluated by the Planetary Data System. The latest disks to be produced by the Planetary Data System are a set of three disks containing all of the images of Uranus acquired by the Voyager spacecraft. The images are in both compressed and uncompressed format. IMDISP can read the uncompressed images directly, but special software is provided to decompress the compressed images, which can not be processed directly. IMDISP can also display images stored on floppy or hard disks. A digital image is a picture converted to numerical form so that it can be stored and used in a computer. The image is divided into a matrix of small regions called picture elements, or pixels. The rows and columns of pixels are called "lines" and "samples", respectively. Each pixel has a numerical value, or DN (data number) value, quantifying the darkness or brightness of the image at that spot. In total, each pixel has an address (line number, sample number) and a DN value, which is all that the computer needs for processing. DISPLAY commands allow the IMDISP user to display all or part of an image at various positions on the display screen. The user may also zoom in and out from a point on the image defined by the cursor, and may pan around the image. To enable more or all of the original image to be displayed on the screen at once, the image can be "subsampled." For example, if the image were subsampled by a factor of 2, every other pixel from every other line would be displayed, starting from the upper left corner of the image. Any positive integer may be used for subsampling. The user may produce a histogram of an image file, which is a graph showing the number of pixels per DN value, or per range of DN values, for the entire image. IMDISP can also plot the DN value versus pixels along a line between two points on the image. The user can "stretch" or increase the contrast of an image by specifying low and high DN values; all pixels with values lower than the specified "low" will then become black, and all pixels higher than the specified "high" value will become white. Pixels between the low and high values will be evenly shaded between black and white. IMDISP is written in a modular form to make it easy to change it to work with different display devices or on other computers. The code can also be adapted for use in other application programs. There are device dependent image display modules, general image display subroutines, image I/O routines, and image label and command line parsing routines. The IMDISP system is written in C-language (94%) and Assembler (6%). It was implemented on an IBM PC with the MS DOS 3.21 operating system. IMDISP has a memory requirement of about 142k bytes. IMDISP was developed in 1989 and is a copyrighted work with all copyright vested in NASA. Additional planetary images can be obtained from the National Space Science Data Center at (301) 286-6695.

Description: PC-SEAPAK is a user-interactive satellite data analysis software package specifically developed for oceanographic research. The program is used to process and interpret data obtained from the Nimbus-7/Coastal Zone Color Scanner (CZCS), and the NOAA Advanced Very High Resolution Radiometer (AVHRR). PC-SEAPAK is a set of independent microcomputer-based image analysis programs that provide the user with a flexible, user-friendly, standardized interface, and facilitates relatively low-cost analysis of oceanographic satellite data. Version 4.0 includes 114 programs. PC-SEAPAK programs are organized into categories which include CZCS and AVHRR level-1 ingest, level-2 analyses, statistical analyses, data extraction, remapping to standard projections, graphics manipulation, image board memory manipulation, hardcopy output support and general utilities. Most programs allow user interaction through menu and command modes and also by the use of a mouse. Most programs also provide for ASCII file generation for further analysis in spreadsheets, graphics packages, etc. The CZCS scanning radiometer aboard the NIMBUS-7 satellite was designed to measure the concentration of photosynthetic pigments and their degradation products in the ocean. AVHRR data is used to compute sea surface temperatures and is supported for the NOAA 6, 7, 8, 9, 10, 11, and 12 satellites. The CZCS operated from November 1978 to June 1986. CZCS data may be obtained free of charge from the CZCS archive at NASA/Goddard Space Flight Center. AVHRR data may be purchased through NOAA's Satellite Data Service Division. Ordering information is included in the PC-SEAPAK documentation. Although PC-SEAPAK was developed on a COMPAQ Deskpro 386/20, it can be run on most 386-compatible computers with an AT bus, EGA controller, Intel 80387 coprocessor, and MS-DOS 3.3 or higher. A Matrox MVP-AT image board with appropriate monitor and cables is also required. Note that the authors have received some reports of incompatibilities between the MVP-AT image board and ZENITH computers. Also, the MVP-AT image board is not necessarily compatible with 486-based systems; users of 486-based systems should consult with Matrox about compatibility concerns. Other PC-SEAPAK requirements include a Microsoft mouse (serial version), 2Mb RAM, and 100Mb hard disk space. For data ingest and backup, 9-track tape, 8mm tape and optical disks are supported and recommended. PC-SEAPAK has been under development since 1988. Version 4.0 was updated in 1992, and is distributed without source code. It is available only as a set of 36 1.2Mb 5.25 inch IBM MS-DOS format diskettes. PC-SEAPAK is a copyrighted product with all copyright vested in the National Aeronautics and Space Administration. Phar Lap's DOS_Extender run-time version is integrated into several of the programs; therefore, the PC-SEAPAK programs may not be duplicated. Three of the distribution diskettes contain DOS_Extender files. One of the distribution diskettes contains Media Cybernetics' HALO88 font files, also licensed by NASA for dissemination but not duplication. IBM is a registered trademark of International Business Machines. MS-DOS is a registered trademark of Microsoft Corporation. HALO88 is a registered trademark of Media Cybernetics, but the product was discontinued in 1991.

Description: The Land Analysis System (LAS) is an image analysis system designed to manipulate and analyze digital data in raster format and provide the user with a wide spectrum of functions and statistical tools for analysis. LAS offers these features under VMS with optional image display capabilities for IVAS and other display devices as well as the X-Windows environment. LAS provides a flexible framework for algorithm development as well as for the processing and analysis of image data. Users may choose between mouse-driven commands or the traditional command line input mode. LAS functions include supervised and unsupervised image classification, film product generation, geometric registration, image repair, radiometric correction and image statistical analysis. Data files accepted by LAS include formats such as Multi-Spectral Scanner (MSS), Thematic Mapper (TM) and Advanced Very High Resolution Radiometer (AVHRR). The enhanced geometric registration package now includes both image to image and map to map transformations. The over 200 LAS functions fall into image processing scenario categories which include: arithmetic and logical functions, data transformations, fourier transforms, geometric registration, hard copy output, image restoration, intensity transformation, multispectral and statistical analysis, file transfer, tape profiling and file management among others. Internal improvements to the LAS code have eliminated the VAX VMS dependencies and improved overall system performance. The maximum LAS image size has been increased to 20,000 lines by 20,000 samples with a maximum of 256 bands per image. The catalog management system used in earlier versions of LAS has been replaced by a more streamlined and maintenance-free method of file management. This system is not dependent on VAX/VMS and relies on file naming conventions alone to allow the use of identical LAS file names on different operating systems. While the LAS code has been improved, the original capabilities of the system have been preserved. These include maintaining associated image history, session logging, and batch, asynchronous and interactive mode of operation. The LAS application programs are integrated under version 4.1 of an interface called the Transportable Applications Executive (TAE). TAE 4.1 has four modes of user interaction: menu, direct command, tutor (or help), and dynamic tutor. In addition TAE 4.1 allows the operation of LAS functions using mouse-driven commands under the TAE-Facelift environment provided with TAE 4.1. These modes of operation allow users, from the beginner to the expert, to exercise specific application options. LAS is written in C-language and FORTRAN 77 for use with DEC VAX computers running VMS with approximately 16Mb of physical memory. This program runs under TAE 4.1. Since TAE 4.1 is not a current version of TAE, TAE 4.1 is included within the LAS distribution. Approximately 130,000 blocks (65Mb) of disk storage space are necessary to store the source code and files generated by the installation procedure for LAS and 44,000 blocks (22Mb) of disk storage space are necessary for TAE 4.1 installation. The only other dependencies for LAS are the subroutine libraries for the specific display device(s) that will be used with LAS/DMS (e.g. X-Windows and/or IVAS). The standard distribution medium for LAS is a set of two 9~track 6250 BPI magnetic tapes in DEC VAX BACKUP format. It is also available on a set of two TK50 tape cartridges in DEC VAX BACKUP format. This program was developed in 1986 and last updated in 1992.

Description: Spaceborne Synthetic Aperture Radar (SAR) images are useful for planetary mapping and Earth sciences investigations. However, swath widths rarely exceed 100 Kilometers, and images must be patched together to create a mosaic in order to analyze larger areas. The primary function of this program is to generate large digital mosaics of SAR imagery without manually marked tiepoints. MOSK can produce multiframe mosaics by combining images in the along-track, adjacent cross-track swaths, or ascending and descending passes. Geocoded map registered images, such as the ones produced by MAPJTC (NPO-17718), are required as input. The output is a geocoded mosaic on a standard map grid which permits easy registration with other geocoded data sets. Mosaicking of geocoded SAR imagery involves three steps. First, a match point is selected at the center of the overlapping area, then an image patch around the match point is extracted from both images and cross-correlation is done on this area. Then, images with their refined match points are merged together to form a mosaic. To handle the large data volume of overlapping intermediate stages, large mosaics are divided into equal size quadrants with each quadrant cut from an intermediate mosaic. The full mosaic can then be assembled from the individual quadrants. Finally, radiometric disparities at the image seams are smoothed by a "feathering" technique. The automatic mosaic system generates output with minimal operator interaction. However, manual tiepointing is required in cases of a large registration error or two images with smooth surfaces such as ocean images. MOSK is implemented on a DEC VAX 11/785 running VMS 4.5. Most subroutines are in FORTRAN, but three are in MAXL and one is in APAL. The program requires 1 Mb of memory and a Floating Point Systems AP-5210 array processor. The system memory usage is approximately 1000 pages and the requirement of page file size is 2000 blocks. MOSK was developed in 1988.

Description: MAPJTC was designed to rectify and transform the standard image output of the digital Synthetic Aperture Radar (SAR) correlator into a geocoded map registered image without operator interaction or manual tiepointing. This is accomplished by modeling the distortions and predicting the pixel displacements based on platform and radar parameters. The map projection implemented in MAPJTC is the Universal Transverse Mercator. Since the re-sampling operation is independent of the transformation data generation, other cartographic projections can be implemented with few software modifications. MAPJTC makes a precise determination of the geodetic location of an arbitrary pixel within the image frame based on the simultaneous solution of a set of earth model equations, SAR Doppler equations, and SAR range equations that identify the slant range from the sensor to the target at a specific image pixel. Based on a table of geodetic coordinates of the image pixels, the image is then mapped onto the desired cartographic projection by applying the appropriate transformation equations. Typically, mapping involves a two-dimensional re-sampling and is very computationally intensive. MAPJTC reduces the procedure to two one-dimensional passes, which saves computer time. Geocoding transforms the rectified image into a grid defined by a specific map projection. (The image is rotated and rectified to match the map projection.) Again, the two dimensional re-sampling process can be separated into two one-dimensional re-sampling processes. Optionally, MAPJTC can correct terrain-induced distortions in SAR imagery when a digital elevation map is available. MAPJTC was developed on a DEC VAX 11/785 under VMS 4.5. The program is written in FORTRAN (84%), APAL (2%), and MAXL (14%). It requires 6Mb of memory and a Floating Point Systems AP-5210 Array Processor equipped with 1Mb of memory. MAPJTC can run interactively or as a batch job. MAPJTC was developed in 1987.

Description: The Spectral Analysis Manager (SPAM) was developed to allow easy qualitative analysis of multi-dimensional imaging spectrometer data. Imaging spectrometers provide sufficient spectral sampling to define unique spectral signatures on a per pixel basis. Thus direct material identification becomes possible for geologic studies. SPAM provides a variety of capabilities for carrying out interactive analysis of the massive and complex datasets associated with multispectral remote sensing observations. In addition to normal image processing functions, SPAM provides multiple levels of on-line help, a flexible command interpretation, graceful error recovery, and a program structure which can be implemented in a variety of environments. SPAM was designed to be visually oriented and user friendly with the liberal employment of graphics for rapid and efficient exploratory analysis of imaging spectrometry data. SPAM provides functions to enable arithmetic manipulations of the data, such as normalization, linear mixing, band ratio discrimination, and low-pass filtering. SPAM can be used to examine the spectra of an individual pixel or the average spectra over a number of pixels. SPAM also supports image segmentation, fast spectral signature matching, spectral library usage, mixture analysis, and feature extraction. High speed spectral signature matching is performed by using a binary spectral encoding algorithm to separate and identify mineral components present in the scene. The same binary encoding allows automatic spectral clustering. Spectral data may be entered from a digitizing tablet, stored in a user library, compared to the master library containing mineral standards, and then displayed as a timesequence spectral movie. The output plots, histograms, and stretched histograms produced by SPAM can be sent to a lineprinter, stored as separate RGB disk files, or sent to a Quick Color Recorder. SPAM is written in C for interactive execution and is available for two different machine environments. There is a DEC VAX/VMS version with a central memory requirement of approximately 242K of 8 bit bytes and a machine independent UNIX 4.2 version. The display device currently supported is the Raster Technologies display processor. Other 512 x 512 resolution color display devices, such as De Anza, may be added with minor code modifications. This program was developed in 1986.

Description: The Spectral Analysis Manager (SPAM) was developed to allow easy qualitative analysis of multi-dimensional imaging spectrometer data. Imaging spectrometers provide sufficient spectral sampling to define unique spectral signatures on a per pixel basis. Thus direct material identification becomes possible for geologic studies. SPAM provides a variety of capabilities for carrying out interactive analysis of the massive and complex datasets associated with multispectral remote sensing observations. In addition to normal image processing functions, SPAM provides multiple levels of on-line help, a flexible command interpretation, graceful error recovery, and a program structure which can be implemented in a variety of environments. SPAM was designed to be visually oriented and user friendly with the liberal employment of graphics for rapid and efficient exploratory analysis of imaging spectrometry data. SPAM provides functions to enable arithmetic manipulations of the data, such as normalization, linear mixing, band ratio discrimination, and low-pass filtering. SPAM can be used to examine the spectra of an individual pixel or the average spectra over a number of pixels. SPAM also supports image segmentation, fast spectral signature matching, spectral library usage, mixture analysis, and feature extraction. High speed spectral signature matching is performed by using a binary spectral encoding algorithm to separate and identify mineral components present in the scene. The same binary encoding allows automatic spectral clustering. Spectral data may be entered from a digitizing tablet, stored in a user library, compared to the master library containing mineral standards, and then displayed as a timesequence spectral movie. The output plots, histograms, and stretched histograms produced by SPAM can be sent to a lineprinter, stored as separate RGB disk files, or sent to a Quick Color Recorder. SPAM is written in C for interactive execution and is available for two different machine environments. There is a DEC VAX/VMS version with a central memory requirement of approximately 242K of 8 bit bytes and a machine independent UNIX 4.2 version. The display device currently supported is the Raster Technologies display processor. Other 512 x 512 resolution color display devices, such as De Anza, may be added with minor code modifications. This program was developed in 1986.

Description: MSIS is an empirical model of the thermosphere based on Mass Spectrometer and Incoherent Scatter data. It provides a description of atmospheric temperature, density, and composition for altitudes higher than 85 kilometers. There are coefficients in MSIS to account for yearly and daily variations, geodetic latitude and longitude, altitude, and solar activity. Variations due to magnetic storms are represented by three-hour magnetic ap indices. The MSIS model enables a more timely prediction of aeronomic densities for specific events, such as rocket flights. The database for this model is a comprehensive summary of rocket flight, satellite, incoherent scatter radar, grenade, and falling sphere measurements. Subsets of data were formed by random selection after sorting on altitude, latitude, time of day, etc. Curve fitting was done with four to five thousand data points at a time. The resulting coefficients are presented in subroutines which calculate thermospheric composition and temperature for a user-supplied position and time. MSIS is written in FORTRAN 77 for use with batch or interactive programs and has been implemented on a DEC VAX series computer operating under VMS 4.3 with a central memory requirement of approximately 25K of 8 bit bytes. MSIS is based on a 1977 thermosphere model and was last updated in 1987 to reflect the CIRA 1986 Neutral Thermosphere Model.

Description: The Science and Technology Laboratory Applications Software (ELAS) was originally designed to analyze and process digital imagery data, specifically remotely-sensed scanner data. This capability includes the processing of Landsat multispectral data; aircraft-acquired scanner data; digitized topographic data; and numerous other ancillary data, such as soil types and rainfall information, that can be stored in digitized form. ELAS has the subsequent capability to geographically reference this data to dozens of standard, as well as user created projections. As an integrated image processing system, ELAS offers the user of remotely-sensed data a wide range of capabilities in the areas of land cover analysis and general purpose image analysis. ELAS is designed for flexible use and operation and includes its own FORTRAN operating subsystem and an expandable set of FORTRAN application modules. Because all of ELAS resides in one "logical" FORTRAN program, data inputs and outputs, directives, and module switching are convenient for the user. There are over 230 modules presently available to aid the user in performing a wide range of land cover analyses and manipulation. The file management modules enable the user to allocate, define, access, and specify usage for all types of files (ELAS files, subfiles, external files etc.). Various other modules convert specific types of satellite, aircraft, and vector-polygon data into files that can be used by other ELAS modules. The user also has many module options which aid in displaying image data, such as magnification/reduction of the display; true color display; and several memory functions. Additional modules allow for the building and manipulation of polygonal areas of the image data. Finally, there are modules which allow the user to select and classify the image data. An important feature of the ELAS subsystem is that its structure allows new applications modules to be easily integrated in the future. ELAS has as a standard the flexibility to process data elements exceeding 8 bits in length, including floating point (noninteger) elements and 16 or 32 bit integers. Thus it is able to analyze and process "non-standard" nonimage data. The VAX (ERL-10017) and Concurrent (ERL-10013) versions of ELAS 9.0 are written in FORTRAN and ASSEMBLER for DEC VAX series computers running VMS and Concurrent computers running MTM. The Sun (SSC-00019), Masscomp (SSC-00020), and Silicon Graphics (SSC-00021) versions of ELAS 9.0 are written in FORTRAN 77 and C-LANGUAGE for Sun4 series computers running SunOS, Masscomp computers running UNIX, and Silicon Graphics IRIS computers running IRIX. The Concurrent version requires at least 15 bit addressing and a direct memory access channel. The VAX and Concurrent versions of ELAS both require floating-point hardware, at least 1Mb of RAM, and approximately 70Mb of disk space. Both versions also require a COMTAL display device in order to display images. For the Sun, Masscomp, and Silicon Graphics versions of ELAS, the disk storage required is approximately 115Mb, and a minimum of 8Mb of RAM is required for execution. The Sun version of ELAS requires either the X-Window System Version 11 Revision 4 or Sun OpenWindows Version 2. The Masscomp version requires a GA1000 display device and the associated "gp" library. The Silicon Graphics version requires Silicon Graphics' GL library. ELAS display functions will not work with a monochrome monitor. The standard distribution medium for the VAX version (ERL~10017) is a set of two 9-track 1600 BPI magnetic tapes in DEC VAX BACKUP format. This version is also available on a TK50 tape cartridge in DEC VAX BACKUP format. The standard distribution medium for the Concurrent version (ERL-10013) is a set of two 9-track 1600 BPI magnetic tapes in Concurrent BACKUP format. The standard distribution medium for the Sun version (SSC-00019) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the Masscomp version, (SSC-00020) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the Silicon Graphics version (SSC-00021) is a .25 inch streaming magnetic IRIS tape cartridge in UNIX tar format. Version 9.0 was released in 1991. Sun4, SunOS, and Open Windows are trademarks of Sun Microsystems, Inc. MIT X Window System is licensed by Massachusetts Institute of Technology.

Description: The Science and Technology Laboratory Applications Software (ELAS) was originally designed to analyze and process digital imagery data, specifically remotely-sensed scanner data. This capability includes the processing of Landsat multispectral data; aircraft-acquired scanner data; digitized topographic data; and numerous other ancillary data, such as soil types and rainfall information, that can be stored in digitized form. ELAS has the subsequent capability to geographically reference this data to dozens of standard, as well as user created projections. As an integrated image processing system, ELAS offers the user of remotely-sensed data a wide range of capabilities in the areas of land cover analysis and general purpose image analysis. ELAS is designed for flexible use and operation and includes its own FORTRAN operating subsystem and an expandable set of FORTRAN application modules. Because all of ELAS resides in one "logical" FORTRAN program, data inputs and outputs, directives, and module switching are convenient for the user. There are over 230 modules presently available to aid the user in performing a wide range of land cover analyses and manipulation. The file management modules enable the user to allocate, define, access, and specify usage for all types of files (ELAS files, subfiles, external files etc.). Various other modules convert specific types of satellite, aircraft, and vector-polygon data into files that can be used by other ELAS modules. The user also has many module options which aid in displaying image data, such as magnification/reduction of the display; true color display; and several memory functions. Additional modules allow for the building and manipulation of polygonal areas of the image data. Finally, there are modules which allow the user to select and classify the image data. An important feature of the ELAS subsystem is that its structure allows new applications modules to be easily integrated in the future. ELAS has as a standard the flexibility to process data elements exceeding 8 bits in length, including floating point (noninteger) elements and 16 or 32 bit integers. Thus it is able to analyze and process "non-standard" nonimage data. The VAX (ERL-10017) and Concurrent (ERL-10013) versions of ELAS 9.0 are written in FORTRAN and ASSEMBLER for DEC VAX series computers running VMS and Concurrent computers running MTM. The Sun (SSC-00019), Masscomp (SSC-00020), and Silicon Graphics (SSC-00021) versions of ELAS 9.0 are written in FORTRAN 77 and C-LANGUAGE for Sun4 series computers running SunOS, Masscomp computers running UNIX, and Silicon Graphics IRIS computers running IRIX. The Concurrent version requires at least 15 bit addressing and a direct memory access channel. The VAX and Concurrent versions of ELAS both require floating-point hardware, at least 1Mb of RAM, and approximately 70Mb of disk space. Both versions also require a COMTAL display device in order to display images. For the Sun, Masscomp, and Silicon Graphics versions of ELAS, the disk storage required is approximately 115Mb, and a minimum of 8Mb of RAM is required for execution. The Sun version of ELAS requires either the X-Window System Version 11 Revision 4 or Sun OpenWindows Version 2. The Masscomp version requires a GA1000 display device and the associated "gp" library. The Silicon Graphics version requires Silicon Graphics' GL library. ELAS display functions will not work with a monochrome monitor. The standard distribution medium for the VAX version (ERL~10017) is a set of two 9-track 1600 BPI magnetic tapes in DEC VAX BACKUP format. This version is also available on a TK50 tape cartridge in DEC VAX BACKUP format. The standard distribution medium for the Concurrent version (ERL-10013) is a set of two 9-track 1600 BPI magnetic tapes in Concurrent BACKUP format. The standard distribution medium for the Sun version (SSC-00019) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the Masscomp version, (SSC-00020) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the Silicon Graphics version (SSC-00021) is a .25 inch streaming magnetic IRIS tape cartridge in UNIX tar format. Version 9.0 was released in 1991. Sun4, SunOS, and Open Windows are trademarks of Sun Microsystems, Inc. MIT X Window System is licensed by Massachusetts Institute of Technology.

Description: IMAGEP is a FORTRAN computer algorithm containing various image processing, analysis, and enhancement functions. It is a keyboard-driven program organized into nine subroutines. Within the subroutines are other routines, also, selected via keyboard. Some of the functions performed by IMAGEP include digitization, storage and retrieval of images; image enhancement by contrast expansion, addition and subtraction, magnification, inversion, and bit shifting; display and movement of cursor; display of grey level histogram of image; and display of the variation of grey level intensity as a function of image position. This algorithm has possible scientific, industrial, and biomedical applications in material flaw studies, steel and ore analysis, and pathology, respectively. IMAGEP is written in VAX FORTRAN for DEC VAX series computers running VMS. The program requires the use of a Grinnell 274 image processor which can be obtained from Mark McCloud Associates, Campbell, CA. An object library of the required GMR series software is included on the distribution media. IMAGEP requires 1Mb of RAM for execution. The standard distribution medium for this program is a 1600 BPI 9~track magnetic tape in VAX FILES-11 format. It is also available on a TK50 tape cartridge in VAX FILES-11 format. This program was developed in 1991. DEC, VAX, VMS, and TK50 are trademarks of Digital Equipment Corporation.

Description: On an hourly time-scale the different roles of the solar wind and interplanetary magnetic field (IMF) parameters on ground micropulsation activity can be better investigated than at longer time-scales. A long-term comparison between ground measurements made at L'Aquila and IMP 8 observations confirms the solar wind speed as the key parameter for the onset of pulsations even at low latitudes, although additional control of the energy transfer from the interplanetary medium to the earth's magnetosphere is clearly exerted by the cone angle. Above about 20 mHz the frequency of pulsations is confirmed to be closely related to the IMF magnitude while, in agreement with model predictions, the IMF magnitude is related to the amplitude of the local fundamental resonant mode. We provide an interesting example in which high resolution measurements simultaneously obtained in the foreshock region and on the ground show that external transversal fluctuations do not penetrate deep into the low latitude magnetosphere.

Description: This paper discusses in situ measurements of O3, aerosol number density, and aerosol size obtained during NASA Arctic Boundary Layer Expedition aircraft flights over the Alaskan Arctic region. The major source of summer O3 for the troposphere in the intrusion of stratospheric air and subsequent transport to lower altitudes. Photochemistry of mixed layer emissions and O3 transported from high northern latitude urban/industrialized areas do not appear to play major roles as sources of O3 for the Alaska region. O3 gradients reflect the loss at the surface and supply from the stratosphere. Free tropospheric O3 averaged 74 ppbv compared to 32 ppbv for the mixed layer. O3 loss mechanisms are a combination of the destruction via photochemistry, chemical reaction with surface emissions, and direct loss through deposition to the surface. The boreal forest in the most efficient of the O3 sinks and has the largest increase in aerosol number density relative to the free troposphere.

Description: The most important investigations leading to the International Reference Ionosphere 1990 (IRI-90) are overviewed, and the latest version of the model is described. The shortcomings and limitations of the IRI-90 are pointed out, together with the ways of overcoming them. The list of studies that the IRI group has yet to carry out includes the investigations of magnetic storm effects as the highest priority. This paper discusses determinations of and the available data on the electron density, plasma temperatures, ion composition, and ion drift in the ionosphere, together with future improvements needed on these parameters.

Description: In the aftermath of the eruption of Mt. Pinatubo, multiwavelength stratospheric aerosol extinction measurements by the satellite-borne Stratospheric Aerosol and Gas Experiment (SAGE II) revealed the presence of a previously unobserved mode of aerosol that exhibited high extinction but a small inferred particle size. This mode may represent a transitional phase between the very small aerosol created by gas-to-particle conversion and a quasi-steady state, post-volcanic aerosol that exhibits both large extinction and large particle size. The presence of a transitional small aerosol mode may have a significant impact on chemical and radiative processes in the stratosphere.

Description: CO2 exchange rates were measured at selected tundra sites near Bethel, Alaska using portable, climate-controlled, instrumented enclosures. The empirically modeled exchange rate for a representative area of vegetated tundra was 1.2 +/- 1.2 g/sq m/d, compared to a tower-measured exchange over the same time period of 1.1 +.0- 1.2 g/sq m/d. Net exchange in response to varying light levels was compared to wet meadow and dry upland tundra, and to the net exchange measured by the micrometeoroidal tower technique. The multispectral reflectance properties of the sites were measured and related to exchange rates in order to provide a quantitative foundation for the use of satellite remote sensing to monitor biosphere/atmosphere CO2 exchange in the tundra biome.

Description: Enhanced concentrations of CH4 in the unpolluted atmospheric mixed layer over both Arctic and subarctic tundra landscapes are documented here using data from the NASA Arctic Boundary Layer Expedition (ABLE 3A). The CH4 concentration gradients were determined mainly by interactions of biogenic emission from wet tundra and turbulent mixing proceses. The gradient were most frequently associated with intrusion of upper tropospheric or stratospheric air into the midtroposphere, emissions from forest and tundra fires, and long-range transport of enhanced concentration of these gases from unidentified sources. Summertime haze layers exhibited midtropospheric enhancements of CH4 similar to those measured in winter Arctic events. The observations confirm the importance of Arctic and Subarctic wetland environments as a regional source of global atmospheric CH4.

Description: The oxidation of the earth's crust and the increase in atmospheric oxygen early in earth history have been linked to the accumulation of reduced carbon in sedimentary rocks. Trends in the carbon isotope composition of sedimentary organic carbon and carbonate show that during the Proterozoic aeon (2.5-0.54 Gyr ago) the organic carbon reservoir grew in size, relative to the carbonate reservoir. This increase, and the concomitant release of oxidizing power in the environment, occurred mostly during episodes of global rifting and orogeny.

Description: Recently available spectral O3 line parameters are summarized and progress in remote sensing based on these parameters is discussed. Particular attention is given to covering line positions, line intensities and linewidths for both the main isotopic species (O-16)3 and the isotopic variants (O-16)(O-18)(O-16) and (O-16)(O-16)(O-18).

Description: The paper presents Alouette 2/ISIS 1 data which furnish evidence for the stimulation of high-order D(n) resonances (n greater than 4) by topside sounders, confirming the prediction of Osherovich (1990) based on an analogy with naturally occurring narrowband magnetospheric emissions. The results indicate that observations of stimulated ionospheric emissions and naturally occurring magnetospheric emissions can be used as complementary data sets to address such fundamental questions as the nature of the excitation mechanism for these emissions and the nature of the waves (i.e., whether the waves predominantly electrostatic or with a significant magnetic component present), and the question of the dominance among the Dn, Dn(+), and Dn(-) resonances and the conditions required for all three to be present at the same time.

Description: Ground magnetic field perturbations recorded by the CANOPUS magnetometer network in the 7 to 13 MLT sector are used to examine how reconfigurations of the dayside polar ionospheric flow take place in response to north-south changes of the IMF. During the 6-h interval in question, IMF Bz oscillates between +/- 7 nT with about a 1-h period. Corresponding variations in the ground magnetic disturbance are observed which we infer are due to changes in ionospheric flow. Cross correlation of the data obtained from two ground stations at 73.5 deg magnetic latitude, but separated by about 2 hours in MLT, shows that changes in the flow are initiated in the prenoon sector (about 10 MLT) and then spread outward toward dawn and dusk with a phase speed of about 5 km/s over the longitude range about 8 to 12 MLT, slowing to about 2 km/s outside this range. Cross correlating the data from these ground stations with IMP 8 IMF Bz records produces a MLT variation in the ground response delay relative to the IMF which is compatible with these deduced phase speeds.

Description: The particle scattering and current sheet stability features in the geomagnetic tail during the phase of substorm growth were investigated using Tsyganenko's (1989) magnetic field model. In a study of four substorm events which were observed both in the high-altitude nightside tail and in the auroral ionosphere, the model magnetic field was adjusted to each case so as to represent the global field development during the growth phase of the substorms. The model results suggest that the auroral brightenings are connected with processes taking place in the near-earth region inside about 15 earth radii. The results also suggest that there is a connection between the chaotization of the electrons and the auroral brightenings at substorm onset.

Description: Alternative geometries for the present-day configuration of plate boundaries in northeast Asia and Japan are tested using NUVEL-1 and 256 horizontal earthquake slip vectors from the Japan and northern Kuril trenches. Statistical analysis of the slip vectors is used to determine whether the North American, Eurasian, or Okhotsk plate overlies the trench. Along the northern Kuril trench, slip vectors are well-fit by the NUVEL-1 Pacific-North America Euler pole, but are poorly fit by the Pacific-Eurasia Euler pole. Results for the Japan trench are less conclusive, but suggest that much of Honshu and Hokkaido are also part of the North American plate. The simplest geometry consistent with the trench slip vectors is a geometry in which the North American plate extends south to 41 deg N, and possibly includes northern Honshu and southern Hokkaido. Although these results imply that the diffuse seismicity that connects the Lena River delta to Sakhalin Island and the eastern Sea of Japan records motion between Eurasia and North America, onshore geologic and seismic data define an additional belt of seismicity in Siberia that cannot be explained with this geometry. Assuming that these two seismic belts constitute evidence for an Okhotsk block, two published kinematic models for motion of the Okhotsk block are tested. The first model, which predicts motion of up to 15 mm/yr relative to North America, is rejected because Kuril and Japan trench slip vectors are fit more poorly than for the simpler geometry described above. The second model gives a good fit to the trench slip vectors, but only if Okhotsk-North America motion is slower than 5 mm/yr.

Description: This paper discusses the biophysical stratification of the FIFE site, implementation of the stratification utilizing geographic information system methods, and validation of the stratification with respect to field measurements of biomass, Bowen ratio, soil moisture, and the greenness vegetation index (GVI) derived from TM satellite data. Maps of burning and topographic position were significantly associated with variation in GVI, biomass, and Bowen ratio. The stratified design did not significantly alter the estimated site-wide means for surface climate parameters but accounted for between 25 and 45 percent of the sample variance depending on the variable.

Description: During the intensive field campaigns of the First International Satellite Land Surface Climatology Project (ISLSCP) Field Experiment (FIFE) in May-October of 1987, several nearly simultaneous measurements were made with low-altitude flights of the L-band radiometer and C- and X-band scatterometers over two transects in the Konza Prairie Natural Research Area, some 8 km south of Manhattan, Kansas. These measurements showed that although the scatterometers were sensitive to soil moisture variations in most regions under the flight path, the L-band radiometer lost most of its sensitivity in regions unburned for many years. The correlation coefficient derived from the regression between the radar backscattering coefficient and the soil moisture was found to improve with the increase in antenna incidence angle. This is attributed to a steeper falloff of the backscattering coefficient as a function of local incidence at angles near nadir than at angles greater than 30 deg.

Description: Four radiometric correction methods for the reduction of slope-aspect effects in a Landsat TM data set are tested in a mountainous test site with regard to their physical soundness and their influence on forest classification, as well as on the visual appearance of the scene. Excellent ground reference information and a fine-resolution DEM allowed precise assessment of the applicability of the methods under investigation. The results of the study presented here demonstrate the weakness of the classical cosine correction method for radiometric correction in rugged terrain. The statistical, Minnaert and C-correction approaches, however, yielded an improvement of the forest classification and an impressive reduction of the visual topography effect.

Description: Newell and Meng (1992) present maps of the occurrence probability of various classifications of particle precipitation as seen in the dayside topside ionosphere. It is argued that these are maps of the magnetospheric regions, a contention with which their critics disagree. The latter conclude that, because of convection, any one population of particles seen at low altitudes will have originated from a wide variety of locations, and particle characteristics cannot be mapped back to those in the magnetosphere without detailed knowledge of both the convection and magnetic field. Steplike boundaries between the regions will arise from nonsteady-state conditions and cannot be envisaged as steady-state magnetospheric boundaries between two plasma populations. In their reply Newell and Meng contend that convection does not move plasma from the LLBL into the cusp. Most of the LLBL plasma comes from the magnetosheath, so the direction of plasma transfer is in the other direction.

Description: Development of a first-order radiative transfer model for predicting backscatter from tree canopies has been underway at the University of Michigan Radiation Laboratory for some time. This model is known as the Michigan Microwave Canopy Scattering (MIMICS) model. This article presents the second-generation MIMICS model (MIMICS II) which accounts for canopies with discontinuous (open) crown layer geometries. MIMICS II models open crown layers by treating the location, size, and shape of the individual tree crowns as random variables. The backscattering coefficients for the canopy are then determined by introducing statistics derived from these parameters into the radiative transfer solution. Application of the radiative transfer equations to the discontinuous canopy geometry is presented. The resulting model is a robust fully polarimetric solution that is applicable over a wide variety of canopy architectures. Model simulations are compared to results generated with the continuous canopy model. The effect of the open crown geometry is found to be most significant at shallow incidence angles and at high frequencies for trees with well-developed crowns. Under these conditions, the gaps in the crown layer give rise to a notable increase in crown layer transmissivity which allows the radar to see through to the lower layers of the canopy more easily, thereby directly affecting the backscatter contribution of the trunks and ground.

Description: Experimental studies are performed on some coniferous trees (Austrian pine, Nordmann spruce, and Norway spruce) to investigate the relation between the tree architecture and radar signal at X-band. For a single tree, the RCS is measured as a function of the scatterer location at 90 deg incidence. It is found that the main scatterers are the leafy branches and the difference between sigma(vv) and sigma(hh) is significant at the upper portion of the tree. At the lower portion of the tree, sigma(vv) and sigma(hh) have almost the same level. For a group of trees the angular trends of sigma(vv) and sigma(hh) are measured. It is found that the levels of sigma(vv) and sigma(hh) are of the same order, but their angular trends vary from one tree species to the other depending on the tree species structure. The interpretation of these experimental results is carried out with the help of a theoretical model which accounts for the structure of the tree. According to this theoretical study, the major scattering trend is due to the leaves, while the perturbation to the angular trend and the level difference between sigma(vv) and sigma(hh) are due to the branch orientation distributions (i.e., the tree architecture).

Description: To monitor future global temperature trends, it would be extremely useful if parameters nonlinearly related to surface temperature could be found, thereby amplifying any warming signal that may exist. Evidence that global thunderstorm activity is nonlinearly related to diurnal, seasonal and interannual temperature variations is presented. Since global thunderstorm activity is also well correlated with the earth's ionospheric potential, it appears that variations of ionospheric potential, that can be measured at a single location, may be able to supply valuable information regarding global surface temperature fluctuations. The observations presented enable a prediction that a 1 percent increase in global surface temperatures may result in a 20 percent increase in ionospheric potential.

Description: The largest known effusive eruptions during the Cenozoic and Mesozoic Eras, the voluminous flood basalts, have long been suspected as being associated with major extinctions of biotic species. Despite the possible errors attached to the dates in both time series of events, the significance level of the suspected correlation is found here to be 1 percent to 4 percent. Statistically, extinctions lag eruptions by a mean time interval that is indistinguishable from zero, being much less than the average residual derived from the correlation analysis. Oceanic flood basalts, however, must have had a different biological impact, which is still uncertain owing to the small number of known examples and differing physical factors. Although not all continental flood basalts can have produced major extinction events, the noncorrelating eruptions may have led to smaller marine extinction events that terminated at least some of the less catastrophically ending geologic stages. Consequently, the 26 Myr quasi-periodicity seen in major marine extinctions may be only a sampling effect, rather than a manifestation of underlying periodicity.

Description: A radar system based on a network analyzer has been developed to study the backscatter from vegetation. The radar is operated at L-band. Radar measurements of a grass field were made in 1991. The radar returns from the grass were measured at three incidence angles. Ground truth and canopy parameters such as blade and stem dimensions, moisture content of the grass and the soil, and blade and stem density, were measured. These parameters are used in a distorted Born approximation model to compute the backscatter coefficients from the grass layer. The model results are compared with the radar data.

Description: The direction angle sensitivity of agricultural field backscatter is studied. The direction angle is defined as the angle between the incident plane and the perpendicular to the row direction. Maximum backscatter power from an angricultural field is expected to occur when the furrow induced slopes are oriented towards the radar, i.e., for a 0 deg direction angle. This effect is known as the cardinal effect. Because of the way the looks are formed in the NASA/JPL airborne synthetic aperture radar (AIRSAR) processor, each look corresponds to a slightly different squint angle. This provides a unique data set to analyze the cardinal effect, as it allows simultaneous observations of the backscatter of a field for sixteen different direction angles. The backscatter variations of the agricultural fields with direction angle at P-, L-, and C-bands is described. The observed variations in backscatter are compared with model predictions. The model predicts that the maximum backscatter occurs for a 0 deg direction angle, but underestimates the backscatter variations with direction angle by more than 10 dB.

Description: C-, L-, and P-band polarimetric signatures of wet snow surfaces have been analyzed, based on airborne synthetic aperture radar (AIRSAR) surveys of an Alpine test site. The importance of surface roughness is evident in the C- and L-band signatures, whereas the diffuse scattering contribution by internal inhomogeneities in the snowpack increases from the C- to the P-band at incidence angles below 50 deg due to increasing penetration.

Description: The Jet Propulsion Laboratory (JPL) airborne synthetic aperture radar (AIRSAR) L-band along-track interferometer images currents and waves on the ocean surface. By modifying the operating procedure of this two antenna interferometer, a technique has been developed to enable interferometric measurements to be made simultaneously at two different baselines. The availability of such data allows measurement of the decorrelation process of the ocean in greater detail. The coherence time of the ocean surface can be measured at high resolution over large areas. In addition to the L-band interferometer, a C-band along-track interferometer has been developed. It allows C-band dual-baseline measurements to be made simultaneous with the L-band measurements. The dual-baseline technique and AIRSAR implementation are described, and some example data are presented.

Description: The authors discuss the feasibility of determining the surface flux of sensible heat from forests with surface temperatures measured by satellites together with temperature soundings in the unstable atmospheric boundary layer (ABL). The latent heat flux is derived from the sensible heat flux by means of the energy budget. The study makes use of data collected during HAPEX-MOBILHY (Hydrologic Atmospheric Pilot Experiment-Modelization du Bilan Hydrique). The methodology is based on turbulence similarity for the unstable ABL. The surface temperature data were derived from measurements by the advanced very high resolution radiometer (AVHRR) aboard the NOAA-9 satellite; the atmospheric profiles were obtained by radiosondes.

Description: The authors examine the hypothesis that some part of the ecosystem-dependent variability of the vegetation indices is attributable to the effects of specular reflection of sunlight by leaves. A new class of vegetation indices, or 'minus specular' vegetation indices, is defined to account for the effects of specularly reflected light. Results show that the 'minus specular' indices, when compared to the traditional vegetation indices, potentially provide better estimates of the photosynthetic activity of a canopy than the traditional vegetation indices, particularly as a function of sun and view angles.

Description: The field experiment described took place in the Sayani Mountains of Siberia. The purpose of the joint field campaign was to observe and exchange methodologies with Russian scientists with regard to the development of remote sensing techniques for the early detection and assessment of forest decline damage believed to be associated with atmospheric deposition and/or insect and disease infestations. Several types of passive and active remote sensing measurements were made in conjunction with biophysical measurements on vegetative samples collected from four study sites representing a strong elevational gradient. Relatively cloud-free SPOT data were also acquired over the study area. Moderate canopy damage was recorded at the mid-elevation site (3400 ft/1037 m). The lowest levels of damage were recorded at the lowest elevation site (2300 ft/701 m.) At all sites, east versus west flagging of the canopy was noted (i.e., full canopy on the west-facing side of the canopy, significantly less foliage on the east-facing side).

Description: Earth photography from the Space Shuttle is used to examine the ice cover on Lake Baikal and correlate the patterns of weakened and melting ice with known hydrothermal areas in the Siberian lake. Particular zones of melted and broken ice may be surface expressions of elevated heat flow in Lake Baikal. The possibility is explored that hydrothermal vents can introduce local convective upwelling and disrupt a stable water column to the extent that the melt zones which are observed in the lake's ice cover are produced. A heat flow map and photographs of the lake are overlaid to compare specific areas of thinned or broken ice with the hot spots. The regions of known hydrothermal activity and high heat flow correlate extremely well with circular regions of thinned ice, and zones of broken and recrystallized ice. Local and regional climate data and other sources of warm water, such as river inlets, are considered.

Description: A new method is presented for estimating the aerodynamic roughness length of heterogeneous land surfaces and complex landscapes using elevation measurements performed with an airborne laser altimeter and the Seasat radar altimeter. Land surface structure is characterized at increasing length scales by considering three basic landscape elements: (1) partial to complete canopies of herbaceous vegetation; (2) sparse obstacles (e.g., shrubs and trees); and (3) local relief. Measured parameters of land surface geometry are combined to obtain an effective aerodynamic roughness length which parameterizes the total atmosphere-land surface stress.

Description: An iterative parallel region growing (IPRG) algorithm previously developed by Tilton (1989) produces hierarchical segmentations of images from finer to coarser resolution. An ideal segmentation does not always correspond to one single iteration but to several different ones, each one producing the 'best' result for a separate part of the image. With the goal of finding this ideal segmentation, the results of the IPRG algorithm are refined by utilizing some additional information, such as edge features, and by interpreting the tree of hierarchical regions.

Description: Radar backscatter measurements over the Konza Prairie were obtained by means of C- and X-band scatterometers as a part of the first ISLSCP Field Experiment (FIFE) to determine soil moisture. Nearly simultaneous radar and radiometer data sets were collected along two transects that coincided with direct soil-moisture measurements. The results show that radars can be used for soil-moisture estimation over the complete transect, whereas radiometer sensitivity to soil moisture is drastically reduced over regions left unburned for many years. A combined rough-surface/volume scatter model was formulated. Calculated and measured scattering data are compared to determine the sensitivity of the scattering coefficient to different surface treatments.

Description: The synthetic aperture radar (SAR) data processing algorithm used by the Alaska SAR Facility (ASF) for the European Space Agency's first Remote-Sensing Satellite (E-ERS-1) SAR data are examined. Preprocessing highlights two features: signal measurement, which includes signal-to-noise ratio, replica measurement, and noise measurement; and Doppler measurement, which includes clutter lock and autofocus. The custom pipeline architecture performs the main processing with controls at the input interface, range correlator, corner-turn memory, azimuth correlator, and multi-look memory. The control software employs a flexible control scheme. The Committee on Earth Observation Satellites (CEOS) format encapsulates the ASF products. System performance for SAR image processing of E-ERS-1 data is reviewed.

Description: The monthly and daily samples of the Ap index for the interval from 1932 through 1982 were studied using the power spectrum technique. Results obtained for Bartel's period (about 27 days), the semiannual period, the dual-peak solar cycle distribution of geomagnetic storms, and certain other medium-scale periodicities are examined in detail. In addition, results on the cumulative occurrence number of storms per decade as a function of the Ap and Dst indices for the storm are presented.

Description: The circulation of polar wind ions from the high-latitude ionosphere to the plasma sheet is investigated. Single-particle trajectory simulations for the geomagnetic tail show, in addition to the breaking of adiabaticity, the possible creation of new high-altitude mirror points. This trajectory feature results from an intense parallel deceleration imparted by the magnetic field rotation during fast ExB transport. This centrifugal deceleration yields a critical parallel velocity which depends on the magnitude of the convection electric field and below which ions remain trapped inside the neutral sheet.

Description: Plot-scale hydrologic field studies were initiated at NASA Marshall Space Flight Center to a) investigate the spatial and temporal variability of surface and subsurface hydrologic processes, particularly as affected by vegetation, and b) develop experimental techniques and associated instrumentation methodology to study hydrologic processes at increasingly large spatial scales. About 150 instruments, most of which are remotely operated, have been installed at the field site to monitor ground atmospheric conditions, precipitation, interception, soil-water status, and energy flux. This paper describes the nature of the field experiment, instrumentation and sampling rationale, and presents preliminary findings.

Description: High resolution in situ measurements of reactive nitrogen (NO(y)) and O3 were made in the upper troposphere and lower stratosphere at a variety of latitudes and seasons. In the lower stratosphere, NO(y) and O3 are very highly positively correlated at all times and spatial scales sampled. The ratio NO(y)/NO3 is much less variable than either species measured separately. The ratio has a much weaker gradient with altitude than the mixing ratios of O3 or NO(y). The ratio is smaller and decreases more rapidly with altitude in the tropics than at midlatitudes. In the upper troposphere NO(y) and O3 are only weakly correlated. Their ratio in the tropical upper troposphere is about 0.005-0.025 and the ratio in the midlatitude upper troposphere is about 0.004-0.010. The NO(y) in the upper troposhere is probably partly due to lightning.

Description: The chemistry and dynamics of a convective system observed on February 2, 1987 in the EMEX and STEP campaigns are analyzed. Chemical and thermodynamic profiles in undisturbed air near the EMEX 9 system indicate that the troposphere was well mixed by previous convection. As a consequence there was little direct transport from the boundary layer to the upper troposphere and air transported upward was detrained throughout the middle and upper troposphere. There was minimal effect on O3 production. Other convective complexes located 800-900 km upstream produced greater perturbations on trace gas profile immediately below the tropopause. Ozone production was reduced by about 0.25 ppbv/d at these altitudes, representing a reduction in P(O3) of 15-20 percent over the column from 14.5 to 17 km. P(O3) from 12 to 17 km in a region distant from active convection and subject to lightning was 2-3 times higher than it would have been without lightning.

Description: Lateral variations of the temperature field in the lower mantle have been reconstructed using new results in mineral physics and seismic tomographic data. We show that, with the application of high-pressure experimental values of thermal expansivity and of sound velocities, the slow seismic anomalies in the lower mantle under the Pacific and Africa can be converted into realistic-looking plume structures with large dimensions of 0(1000 km). The outer fringes of the plumes have an excess temperature of around 400 K. In the core of the plumes are found tonguelike structures with extremely high thermal anomalies. These values can exceed 1200 K and are too high to be explained on the basis of thermal anomalies alone. We suggest that these major plumes in the deep mantle may be driven by both thermal and chemical buoyancies or that enhanced conductive heat-transfer may be important there.

Description: The largest known Cenozoic impact craters with the most accurately measured ages are found to correlate very closely with geologic stage boundaries. The level of confidence in this result is 98-99 percent even under the most pessimistic assumptions concerning dating errors. One or more large impacts may have led, in at least some cases, to the extinctions and first appearances of biotic species that mark many of the geologic stage boundaries.

Description: The feasibility of using imaging spectrometry in studies of playa evaporites is demonstrated by mapping efflorescent salt crusts in Death Valley (California), using Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data and a recently developed least-squares spectral band-fitting algorithm. It is shown that it was possible to remotely identify eight different saline minerals, including three borates that have not been previously reported for the Death Valley efflorescent crusts: hydroboracite, pinnoite, and rivadavite. The three borates are locally important phases in the crusts; at least one of them, rivadavite, appears to be forming directly from brine.

Description: Data on chlorophyll content and bathymetry of Lake Tahoe obtained on August 9, 1990 by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) are compared to concurrent in situ surface and in-water measurements. Measured parameters included profiles of percent transmission of monochromatic light, stimulated chlorophyll fluorescence, photosynthetically available radiation, spectral upwelling and downwelling irradiance, and upwelling radiance. Several analyses were performed illustrating the utility of the AVIRIS over a dark water scene. Image-derived chlorophyll concentration compared extremely well with that measured with bottle samples. A bathymetry map of the shallow parts of the lake was constructed which compares favorably with published lake soundings.

Description: Ozone profiles obtained with the Differential Absorption Lidar (DIAL) system at the National Institute for Environmental Studies (NIES) (Tsukuba, Japan) were compared with data provided by the satellite sensor SAGE II. The SAGE II data were selected based on criteria of spatial and temporal differences between the DIAL and the SAGE II measurements: five degrees in latitude and 15 degrees in longitude, within a latitudinal band from 31 deg to 41 deg N, and within one, three and five days after or before the DIAL measurements. Results show very good agreement for the individual and the zonal-mean profiles. The average mean difference between the DIAL and the SAGE II measurements over the altitudes 15-50 km was about 10 percent.

Description: The BATSE on-board burst system has been triggered by over 400 terrestrial electron precipitation events. These are the single largest cause of false triggers. Bremsstrahlung is generated as the precipitating electrons interact in the Earth's atmosphere, or in the spacecraft, and this radiation is detected by the Large Area Detectors, often triggering the instrument into burst mode. Several examples of such events are presented here, and the different classes of events are described. A possible correlation of events to strong magnetospheric activity is presented, and the association of a sub-set of events to a powerful VLF transmitter on the western coast of Australia is described.

Description: Detecting and imaging small wildfires with an Airborne Scanner is done against generally high background levels. The Airborne Scanner System used is a two-channel thermal IR scanner, with one channel selected for imaging the terrain and the other channel sensitive to hotter targets. If a relationship can be determined between the two channels that quantifies the background signal for hotter targets, then an algorithm can be determined that removes the background signal in that channel leaving only the fire signal. The relationship can be determined anywhere between various points in the signal processing of the radiometric data from the radiometric input to the quantized output of the system. As long as only linear operations are performed on the signal, the relationship will only depend on the system gain and offsets within the range of interest. The algorithm can be implemented either by using a look-up table or performing the calculation in the system computer. The current presentation will describe the algorithm, its derivation, and its implementation in the Firefly Wildfire Detection System by means of an off-the-shelf commercial scanner. Improvement over the previous algorithm used and the margin gained for improving the imaging of the terrain will be demonstrated.

Description: Remotely sensed optical and microwave data can be synergistically used to infer land surface properties. Optical data can be used to estimate surface albedo, radiation absorption by vegetation canopies and their photosynthetic efficiencies. Vegetation canopy reflectance at red and near-infrared wavelengths can be used to correct for vegetation effect on microwave emissivities at low frequencies for estimating soil moisture. Optical data can also provide information about surface and air temperatures, precipitable water vapor, cloud top temperature and its water content. This information can be utilized to correct microwave data for atmospheric effects. These points are illustrated with theoretical analyses and by application to satellite data. The basic physical mechanisms operative at the various wavelengths are also discussed.

Description: Quantitative use of remote multispectral measurements to study and map land surface evapotranspiration has been a challenging issue for the past 20 years. Past work is reviewed against process physics. A simple two-layer combination-type model is used which is applicable to both vegetation and bare soil. The theoretic analysis is done to show which land surface properties are implicitly defined by such evaporation models and to assess whether they are measurable as a matter of principle. Conceptual implications of the spatial correlation of land surface properties, as observed by means of remote multispectral measurements, are illustrated with results of work done in arid zones. A normalization of spatial variability of land surface evaporation is proposed by defining a location-dependent potential evaporation and surface temperature range. Examples of the application of remote based estimates of evaporation to hydrological modeling studies in Egypt and Argentina are presented.

Description: The Tsyganenko models contain 'modules' for two external current systems, the tail and ring currents; the former is the more detailed. No specific modules, however, cover the magnetopause and the Birkeland current system. The effects of these currents are represented by an all-purpose 'polynomial', and the resulting formulas involve about 30 parameters that specify the model. The dependence on magnetospheric indices is also simplified.

Description: Examples are presented of applications of a fast Fourier transform algorithm to analyze time series of images of Normalized Difference Vegetation Index values. The results obtained for a case study on Zambia indicated that differences in vegetation development among map units of an existing agroclimatic map were not significant, while reliable differences were observed among the map units obtained using the Fourier analysis.

Description: This paper discusses a multisensor satellite approach for the study of hydrological applications. Spectral as well as spatial and temporal characteristics of specific operational and planned instruments applicable to hydrology are presented. A hydrology specific series of sensors are proposed to fill the gaps not covered by the current and planned systems. We have called this hypothetical platform HYDROSAT. In addition, the trade-offs between a geostationary satellite and a polar orbiter are explored.

Description: A quantitative model is developed of the magnetic field produced by the electric current system of region 2 Birkeland currents, closed via the partial ring current. The distribution of j-perpendicular is computed from a given axially asymmetric spatial distribution of hot isotropic magnetospheric plasma over an infinitely thin L shell in an axisymmetric purely dipolar geomagnetic field, while the field-aligned current density is found from the continuity of the net electric current. The magnetic field distribution is derived by a Biot-Savart integral over the electric current system. An assumed cosine dependence of the plasma pressure on local time makes it possible to reduce the problem of analytical representation of the B field to two dimensions. The obtained numerical fits for the partial ring current/region 2 Birkeland current magnetic field are relatively simple, continuous, and valid throughout the whole extraterrestrial space from ionospheric heights up to tens of earth radii.

Description: Decorrelation of the radar signals with time, which is indicative of changes in the surface occurring during the period of time spanned by the images, is examined. It is concluded that the decorrelation effects due to thermal noise can be easily evaluated and removed, while those due to slight angular changes between flight tracks are negligible. Spatial baseline and rotation-induced decorrelation can be derived using the Fourier transform of the impulse response intensity, and increases linearly with baseline or rotation in an ideal system. Empirical results confirm that as the baseline increases, the overall correlation decreases due to spatial baseline noise.

Description: A number of approaches for calibrating SAR imaging data including data from multipolarization and multifrequency systems developed at the Jet Propulsion Laboratory are discussed. It is shown how calibrated SAR data can be used to improve the understanding of the physical properties of the earth's surface layer and how calibration uncertainties and system noise should be handled by the SAR data user. Examples of calibrated SAR data from the NASA/JPL DC-8 SAR are used to demonstrate use of calibrated data to monitor temporal change and to improve the classification of land cover type.

Description: The effects of multiple phase transitions on mantle convection are investigated by numerical simulations that are based on three-dimensional models. These simulations show that cold sheets of mantle material collide at junctions, merge, and form a strong downflow that is stopped temporarily by the transition zone. The accumulated cold material gives rise to a strong gravitational instability that causes the cold mass to sink rapidly into the lower mantle. This process promotes a massive exchange between the lower and upper mantles and triggers a global instability in the adjacent plume system. This mechanism may be cyclic in nature and may be linked to the generation of superplumes.

Description: The size and complexity of AVIRIS data sets makes analysis difficult. We present a technique that allows the researcher to rapidly scan the full data set in image form in order to empirically find significant spatial patterns anywhere across the spectrum. Our approach takes advantage of the speed and power of computer graphics workstations to allow real-time, interactive data manipulation and display. Empirical data selection avoids the bias inherent in theoretical selection criteria, and allows discovery of unexpected relationships within the data set. Link Winds, a prototype data analysis system under development, provides the visualization tools used in this study. We are applying this approach to geological studies in the eastern Mojave Desert.

Description: Current atmospheric correction models applied to imaging spectroscopy data include such methods as residual or scene average, flat field correction, regression method or empirical line algorithm, the continuum interpolated band ratio (CIBR) derivation and the LOWTRAN 7 method. Due to the limitations of using residual and flat field corrections on vegetated scenes, three methods will be compared: regression, CIBR derivation and LOWTRAN 7. Field-measured bright and dark targets taken at the time of the 13 April, 1989 AVIRIS overflight of Jasper Ridge, California were used to formulate the regression method atmospheric correction. Using this corrected scene as 'ground truth', the CIBR derivation and the LOWTRAN 7 method with both input models are compared on the vegetated Jasper Ridge scene. Although representing a qualitative approach, this is a first approximation and shows the need for more quantitative analysis.

Description: This paper provides a guide for the acquisition, processing, and interpretation of Landsat Thematic Mapper (TM) imagery of desert terrains for use in regional exploration. Sun angle considerations, data quality cautions, noise suppression routines, band selections, data calibration, spectral enhancements, perceptual considerations of displays, and general interpretation guidelines are all discussed as components of an image-information extraction procedure.

Description: A new method has been developed to provide a direct test of the error calibrations of gravity models based on actual satellite observations. The basic approach projects the error estimates of the gravity model parameters onto satellite observations, and the results of these projections are then compared with data residual computed from the orbital fits. To allow specific testing of the gravity error calibrations, subset solutions are computed based on the data set and data weighting of the gravity model. The approach is demonstrated using GEM-T3 to show that the gravity error estimates are well calibrated and that reliable predictions of orbit accuracies can be achieved for independent orbits.

Description: The use of SAR data to study geologic processes for better understanding of recent tectonic activity and climate change as well as the mitigation of geologic hazards and exploration for nonrenewable resources is discussed. The geologic processes that are particularly amenable to SAR-based data include volcanism; soil erosion, degradation, and redistribution; coastal erosion and inundation; glacier fluctuations; permafrost; and crustal motions. When SAR data are combined with data from other planned spaceborne sensors including ESA ERS, the Japanese Earth Resources Satellite, and the Canadian Radarsat, it will be possible to build a time-series view of temporal changes over many regions of earth.

Description: SPOT panchromatic imagery is used to measure subresolution horizontal terrain displacements that are associated with earthquakes, sand dune migration, coastal processes, and glacial motion. The approach is aimed at detecting and measuring surface processes by statistically matching the radiometric patterns in the data that differ spatially in a consistent direction over many pixels. Data obtained from the satellite-derived imagery can facilitate the understanding of natural hazards and the determination of the rates of many environmental processes worldwide.

Description: The stability of TIROS-N Microwave Sounding Unit (MSU) channel 4, which monitors the deep-layer averaged temperature of the lower stratosphere, is tested by intercalibrating MSU channel 4 data from the NIROS-N series of NOAA satellites during 1979-1991. The monthly gridpoint anomalies are validated with 10 years of radiosonde data during 1979-1988. The results demonstrated that the satellite sensors are very stable in their calibration and that the previously reported uncertainties in the stratospheric temperature information produced by NOAA are not the result of calibration changes in the MSUs. It was found that the largest globally averaged temperature variations during 1979-1991 occur after the El Chichon (1982) and Pinatubo (1991) volcanic eruptions. These warm events are superimposed upon a net downward trend in temperatures during the period. The cooling trend is strongest in polar regions and the Northern Hemisphere middle latitudes.

Description: Discussed is a key element in the processing of topographic radar maps acquired by the NASA/JPL airborne synthetic aperture radar configured as an across-track interferometer (TOPSAR). TOPSAR utilizes a single transmit and two receive antennas; the three-dimensional target location is determined by triangulation based on a known baseline and two measured slant ranges. The slant range difference is determined very accurately from the phase difference between the signals received by the two antennas. This phase is measured modulo 2pi, whereas it is the absolute phase which relates directly to the difference in slant range. It is shown that splitting the range bandwidth into two subbands in the processor and processing each individually allows for the absolute phase. The underlying principles and system errors which must be considered are discussed, together with the implementation and results from processing data acquired during the summer of 1991.

Description: In the central Namib Desert, dune-free surfaces are separated abruptly from a sea of yellow and red sand dunes at the Kuiseb River canyon. The off-white hues of the dune-free area result from anomalously high surficial gypsum enrichment. Satellite imagery indicates that the gypsum surfaces are associated with lower surface maximum temperatures than those of the darker dune surfaces to the south. One of various sources of sulfate for the gypsum bodies is oceanic H2S, supplied to desert land-surfaces by regular fog incursions. Since fog events are widespread along the coast, the question of anomalous gypsum accumulations north of the dune sea arises. Satellite imagery, in conjunction with more detailed handheld photography from the space shuttle, indicates that the penetration of fog inland is significantly greater over the gypsum surfaces than it is over the dunes. It is postulated that the thermal gradient between these surfaces generates a heat low centered over the northern part of dune sea and that this enhances fog and H2S advection on its north side onto the nearby dune-free zone. In such a system, gypsum/caliche surfaces reinforce advection of fog over themselves in a positive feedback mode.

Description: Remote sensing of aerosol optical thickness from space is difficult over continental surfaces. There are two retrieval algorithms, one based on the use of dark targets and a second based on contrast reduction between selected pixels. Improvements in the contrast reduction method are reported. A procedure is developed for using the satellite image to evaluate whether conditions for applying the structure method are met. The theoretical background is discussed, and the usefulness of the structure functions is demonstrated. The method is applied to NOAA Advanced Very High Resolution Radiometer (AVHRR) imagery where simultaneous ground measurements are used for validation.

Description: A method for using congruent aircraft-satellite observations to calibrate a satellite sensor is presented. A calibrated spectroradiometer at an altitude of 19 km above White Sands, NM, is oriented to view White Sands at the satellite overpass time along the same view vector as the satellite sensor. Collected data are transformed into corresponding estimates of sensor band radiance at the satellite (derived from the aircraft measurements), and average count (from the sensor measurements). These are both averaged across the footprint of the spectroradiometer. Results are presented for the evolution of NOAA-11 Advanced Very High Resolution Radiometer (AVHRR) (Bands 1 and 2) gain between November 1988 and October 1990, and for GOES-6 and GOES-7 VISSR/VAS visible bands during the same period. Estimates of uncertainty in the results are presented, as well as ideas for their reduction in future flights.

Description: The inversion of the leaf area index (LAI) canopy parameter from optical spectral reflectance measurements is obtained using a backpropagation artificial neural network trained using input-output pairs generated by a multiple scattering reflectance model. The problem of LAI estimation over sparse canopies (LAI 〈 1.0) with varying soil reflectance backgrounds is particularly difficult. Standard multiple regression methods applied to canopies within a single homogeneous soil type yield good results but perform unacceptably when applied across soil boundaries, resulting in absolute percentage errors of 〉1000 percent for low LAI. Minimization methods applied to merit functions constructed from differences between measured reflectances and predicted reflectances using multiple-scattering models are unacceptably sensitive to a good initial guess for the desired parameter. In contrast, the neural network reported generally yields absolute percentage errors of 〈30 percent when weighting coefficients trained on one soil type were applied to predicted canopy reflectance at a different soil background.

Description: The fraction of photosynthetically active radiation (PAR) absorbed by a vegetated canopy (APARc) or landscape (APARs) is a critical parameter in climate processes. A grassland study examined: 1) whether APARs can be estimated from PAR bidirectional exitance fractions; and 2) whether APARs is correlated with spectral vegetation indices (SVIs). Data were acquired with a high resolution continuous spectroradiometer at 4 sun angles on grassland sites. APARs was computed from the scattered surface PAR exitance fractions. The nadir APARs value was the most variable diurnally; it provided a good estimate of the average surface APARs at ~95 percent. APARc was best represented by exitance factors between 30-60* forward.

Description: The NASA/Jet Propulsion Laboratory Airborne Synthetic Aperture Radar (JPL AIRSAR) system has now completed four flight campaigns. The authors describe the current state of this system and provide insight into how flight seasons are planned for this instrument. The data processors and data products are described. A table containing relevant system parameters is provided.

Description: Preliminary results from an analysis of the multitemporal radar backscatter signatures of tree species acquired by European Remote Sensing Satellite (ERS-1) synthetic aperture radar (SAR) data are presented. Significant changes in radar backscatter are detected. Correlation of these differences with ground truth observations indicate that these are due to changes in soil and liquid water content as a result of freeze/thaw events. C-band observations acquired by the NASA/Jet Propulsion Laboratory Airborne SAR (JPL AIRSAR) instrument demonstrate the potential of a C-band radar instrument to monitor drought/flood events. The potential of ERS-1 for monitoring phenologic changes in the forest and for classifying tree species is less promising.

Description: An experiment that has been performed to verify the relationship between the dielectric constant of several tree species and their respective water potentials is described. The water potential, xylem flow and dielectric properties of five tree species were continuously monitored while simultaneously manipulating canopy transpiration and water status. An analysis of the data recorded during these manipulations is presented. Results of this analysis demonstrate a clear coincidence of change in dielectric constant and water status. The implication of this relationship for the utilization of remotely sensed data to study canopy water relations is explored. Preliminary backscatter modeling results demonstrate that the changes in dielectric constant that occur as a result of changes in water status are significant enough to be observable with microwave radar.

Description: The advantages and disadvantages of three different approaches to solving the problem of the radiometric correction of synthetic aperture radar (SAR) images of varying terrain heights are presented. The first approach involves registration of a digital elevation model (DEM) of the terrain to the image, determination of the local elevation and incidence angles, and appropriate radiometric correction. The second approach uses a DEM generated from interferometric SAR data to derive the elevation and incidence angle maps. In the third approach, a monopulse technique is employed to determine the elevation angle only. The relative errors in radiometric correction between these approaches are assessed. Calibration errors are estimated using corner reflectors deployed within some of the scenes imaged by the Jet Propulsion Laboratory airborne SAR (JPL AIRSAR).

Description: The functions and capabilities of the NASA Environment Remote Sensing Analysis Facility (ERSAF) located at the Johnson Space Center are described. ERSAF provides dedicated support to earth-observation activities and Earth-looking payloads conducted aboard the Space Shuttle. This support merges environmental satellite imagery with high-resolution film products and digital imagery acquired aboard the Space Shuttle. ERSAF utilizes several computer systems with specialized software to process and analyze environmental information as well as data acquired from the Space Shuttle. These computer systems and the image analysis capabilities are discussed.

Description: Relative phase calibration of radar polarimetry data may be achieved by utilizing the phase information of the receiver calibration tone and knowledge of the antenna path differences among channels measured upon installation of the radar polarimeter. This calibration method does not require any assumptions on the scattering behavior of the scene. This method of phase calibration may be verified by examining the polarization signatures of calibration instruments such as the trihedral corner reflectors.

Description: The measurement of soil moisture from space requires putting relatively large microwave antennas in orbit. Aperture synthesis, an interferometric technique for reducing the antenna aperture needed in space, offers the potential for a practical means of meeting these requirements. An aircraft prototype, electronically steered thinned array L-band radiometer (ESTAR), has been built to develop this concept and to demonstrate its suitability for the measurement of soil moisture. Recent flights over the Walnut Gulch Watershed in Arizona show good agreement with ground truth and with measurements with the Pushbroom Microwave Radiometer (PBMR).

Description: A radar interferometric technique for topographic mapping of surfaces yields a high resolution, globally consistent approach to generation of digital elevation models. The technique is illustrated with maps generated from SEASAT and European Space Agency Remote Sensing Satellite (ERS-1) data. A SEASAT interferometric image of a forested area which includes some unvegetated lava flows is analyzed. An analysis of errors expected from application of the technique to maps generated from ERS-1 data is presented. An orbital scenario for a global mapping mission is outlined.

Description: An MHD simulation was performed to obtain a self-consistent model of magnetic field and plasma density near the X point reconnection region. The MHD model was used to perform extensive ray tracing calculations in order to clarify the propagation characteristics of the plasma waves near the X point reconnection region. The dynamic wave spectra possibly observed by the Geotail spacecraft during a typical cross-tail trajectory are reconstructed. By comparing the extensive ray tracing calculations with the plasma wave data from Geotail, it is possible to perform a kind of 'remote sensing' to identify the location and structure of potential X point reconnection regions.

Description: The 1992 global average total ozone, measured by the Total Ozone Mapping Spectrometer (TOMS) on the Nimbus-7 satellite, was 2 to 3 percent lower than any earlier year observed by TOMS (1979 to 1991). Ozone amounts were low in a wide range of latitudes in both the Northern and Southern Hemispheres, and the largest decreases were in the regions from 10 to 20 deg S and 10 to 60 deg N. Global ozone in 1992 is at least 1.5 percent lower than would be predicted by a statistical model that includes a linear trend and accounts for solar cycle variation and the quasi-biennial oscillation. These results are confirmed by comparisons with data from other ozone monitoring instruments: the SBUV/2 instrument on the NOAA-11 satellite, the TOMS instrument on the Russian Meteor-3 satellite, the World Standard Dobson Instrument 83, and a collection of 22 ground-based Dobson instruments.

Description: Multispectral thermal infrared radiance measurements of the Kupaianaha flow field were acquired with the NASA airborne Thermal Infrared Multispectral Scanner (TIMS) on the morning of 1 October 1988. The TIMS data were used to map both the temperature and emissivity of the surface of the flow field. The temperature map depicted the underground storage and transport of lava. The presence of molten lava in a tube or tumulus resulted in surface temperatures that were at least 10 C above ambient. The temperature map also clearly defined the boundaries of hydrothermal plumes which resulted from the entry of lava into the ocean. The emissivity map revealed the boundaries between individual flow units within the Kupaianaha field. Distinct spectral anomalies, indicative of silica-rich surface materials, were mapped near fumaroles and ocean entry sites. This apparent enrichment in silica may have resulted from an acid-induced leaching of cations from the surfaces of glassy flows.

Description: This paper shows how the radar scattering from vegetated areas is affected by the topography of the surface underneath the vegetation. It is shown, using a discrete scatterer model, that the dominant scattering mechanism may change drastically when the ground surface is tilted relative to the horizontal. In the case of a horizontal ground surface, total scattering may be dominated by scattering off the tree trunks, followed by a reflection off the ground surface. For a relatively small tilt in the ground surface (about 2 deg from horizontal), the ground-trunk interaction term may be replaced by scattering from the branches alone as the dominant scattering mechanism. We also show that the effect of the topography is more pronounced for scattering by longer wavelengths, and discuss the implications on algorithms designed to infer forest woody biomass and soil and vegetation moisture using polarimetric SAR data. The effect of the topography on the scattering behavior from forested areas is illustrated with images acquired by the NASA/JPL three-frequency polarimetric SAR over the Black Forest in Germany.

Description: Land surface hydrologic-atmospheric interactions in humid and semi-arid watersheds were investigated. Active and passive microwave sensors were used to estimate the spatial and temporal distribution of soil moisture at the catchment scale in four areas. Results are presented and discussed. The eventual use of this information in the analysis and prediction of associated hydrologic processes is examined.

Description: Regional ecological studies are considered in the context of the global change problem. The Kursk-91 international experiment is used to illustrate applications of remote sensing data and data bases of field experiments for assessment of parameters of the state of the soil and vegetative cover and subsequent study of biospheric stability on the basis of regular satellite observations.

Description: Accounts are given of the development status and prospective efficacy of the Geoscience Environmental Data Display, the Space Environment Laboratory Data Acquisition and Display System, and the Geospace Environment Modeling program, which are all concerned with the 3D definition of the earth's magnetosphere. Attention is given to current and prospective improvements in the integration of all these data-gathering systems.

Description: Activities at the NASA Langley Research Center's distributed active archive centers (DAACs) intended to capitalize on existing centers of scientific expertise and to prevent a single point of failure are described. A Version 0 Langley DAAC, a prototype of an Earth Observing System Data and Information System, started archiving and distributing existing datasets on the earth's radiation budget, clouds, aerosols, and tropospheric chemistry in late 1992. The major goals of the LaRC Version 0 effort include to enhance scientific use of existing data; to develop institutional expertise in maintaining and distributing data; to encourage cooperative interagency and international involvement with datasets and research; and to use institutional capability for processing data from previous missions to prepare for processing the future EOS satellite data.

Description: As a result of the 1991 Persian Gulf war, between mid-January and June 1991, the Persian Gulf was contaminated with an estimated 4 to 6 million barrels of crude oil, released directly into the Gulf from refinement facilities, transhipment terminals, and moored tankers along the coast of Kuwait, and precipitated from oil fire smoke plumes. To assess the environmental impact of the oil, an international team of marine scientists representing 14 nations was assembled under the auspices of the United Nations International Oceanic Commission and the Regional Organization for Protection of the Marine Environment to conduct detailed surveys of the Persian Gulf, the Strait of Hormuz, and the Gulf of Oman, including hydrographic, chemical, and biological measurements. To supplement the field surveys and to serve as an aid in data interpretation, astronauts aboard the Space Shuttle Atlantis photographed water features and coastal habitats in the Persian Gulf during mission STS-45 (24 March to 02 April 1992). The astronauts collected 111 hand-held, color photographs of the Gulf (72 70-mm photographs and 39 5-inch photographs) from an altitude of 296 km (160 n.mi.). The photographs reveal distributions in water turbidity associated with outflow from the Shatt-al-Arab and water circulation along the entire coast of Iran and the Strait of Hormuz, coastal wetlands and shallow-water habitats, and sticks appearing in the sunglint pattern, which appear to be oil.

Description: A description is presented of the activities and results of the Space Shuttle mission STS-45, known as the Mission to Planet Earth. Observations of Mount St. Helens, Manila Bay and Mt. Pinatubo, the Great Salt Lake, the Aral Sea, and the Siberian cities of Troitsk and Kuybyshev are examined. The geological features and effects of human activity seen in photographs of these areas are pointed out.

Description: Space geodetic data from very long baseline interferometry (VLBI) was used to estimate velocity relative to the plate interiors of two sites on the deforming leading edge at the Japan trench. Elastic models of interseismic deformation and results obtained were used to put constraints on the slip rate along the main thrust of the Japan subduction zone. Observed velocities reflect the sum of permanent west-northwest shortening in Honshu, elastic deformation due to locking of the main thrust fault at the Japan trench, and deformation associated with the subducting Phillipine plate. These velocities limit the locked segment of the main thrust at the Japan trench to 27 km vertically and 100 km along the dip. This indicates that the main Pacific plate thrust fault is not strongly coupled and probably does not generate strong earthquakes.