ALBERT

Description: In den vergangenen zwei Jahren hat sich die Welt verändert und vermehrt beherrschen Krisen das Bild. Jahrzehntelange Gewissheiten gelten nicht mehr, Risiken und Unsicherheiten nehmen zu, die Herausforderungen werden immer komplexer und erfordern gleichzeitig immer schnelleres und konsequenteres Handeln.

Description: Seitdem Einweg-Plastikartikel wie Kunststofftüten und Strohhalme verboten wurden, sind Straßen und Strände sauberer geworden. Zudem wurde auch die öffentliche Diskussion über nachhaltigen Konsum intensiviert. Die Gesamtmenge an Kunststoff-Abfällen ließ sich mit "Plastikverboten" hingegen nicht signifikant reduzieren. Zu diesem Ergebnis kommt der vorliegende Polyproblem-Report der gemeinnützigen Röchling Stiftung und des Beratungshauses Wider Sense in Zusammenarbeit mit dem Wuppertal Institut. Die Autor*innen haben die Wirkung staatlicher Verbote von Einweg-Plastikprodukten unter die Lupe genommen und die Erfahrungen aus Deutschland, Kenia und Kalifornien analysiert.

Description: Within the Shaping Digitalisation project, we aim to highlight and discuss the opportunities that digitalisation can bring to Germany. In particular, we are discussing three stand-out areas where action is most needed to achieve ecological transformation: mobility, the circular economy, and agriculture and food. This report addresses the second area in need of action. Up until now, discussions on the circular economy have been limited to recycling and the re-use of materials. We must expand the scope of these discussions to include new, resource-efficient business models and the comprehensive transformation of value chains and industrial structures. Our analysis has found that digitalisation is indispensable for this transformation if used properly. We hope this report will provide the impetus needed to kick-start a climate- and resource-friendly industrial transformation in Germany. Here, we have incorporated the findings of our interdisciplinary workshop on "Shaping the Digital-Ecological Industrial Transformation - Business Models and Political Framework Conditions for Climate and Resource Protection" that was attended by experts from international research institutes, civil organizations, public authorities, and private companies.

Description: The introduction of a Digital Product Passport (DPP) is an opportunity to create a system that can store and share all relevant information throughout a product's life cycle. This would provide industry stakeholders, businesses, public authorities and consumers with a better understanding of the materials used in the product as well as their embodied environmental impact. With the COVID-19 pandemic, the Russian invasion of Ukraine and the cost-of-living crisis, now is a critical moment to transform our economic and business models, while also addressing the huge scale of material emissions. DPPs can be a pivotal policy instrument in this goal. Furthermore, DPPs can accelerate the twin green and digital transitions as part of EU efforts to deliver positive climate action and sustainable economies. In 2020, the European Commission (EC) adopted a new Circular Economy Action Plan (CEAP), which emphasised the need for circular economy initiatives to consider the entire life cycle of products, from the production of basic materials to end-of-life disposal. The Circular Economy Package published in March 2022 includes a proposal for an Ecodesign for Sustainable Products Regulation (ESPR), which builds upon the Ecodesign Directive that covers energy-related products. A DPP will form a key regulatory element of the ESPR by enhancing the traceability of products and their components. This will provide consumers and manufacturers with the information needed to make better informed choices by taking their environmental impact into consideration. As discussed in the report, there is widespread agreement amongst business leaders that a well-designed DPP could have both short- and longer-term benefits, improving access to reliable and comparable product sustainability information for businesses, consumers and policymakers. A well-designed DPP can unify information, making it more readily accessible to all actors in the supply chain. This will support businesses to ensure an effective transformation towards a decarbonised industry. It could also create incentives for companies to make their products more sustainable, as improving access to reliable and consistent information across supply chains will make it easier for customers to make comparisons.

Description: Die Dekarbonisierung der Mietwohnungsbestände ist zwingende Voraussetzung für die Einhaltung deutscher Klimaschutzziele. Hierzu ist eine schnelle und deutliche Verbesserung der Energieeffizienz unabdinglich. Aber: funktioniert der Markt für Energieeffizienz bei Mietwohnungen? Eine empirische Untersuchung auf dem Wuppertaler Mietwohnungsmarkt gibt Antworten darauf. Um die Sanierungsrate signifikant zu steigern, etwa durch eine höhere Zahlungsbereitschaft für Energieeffizienz, braucht es sowohl für Vermieter als auch für Mieter verbesserte Rahmenbedingungen.

Description: A main goal of this study - which also functions as deliverable 210078-D07 of the Circular Economy Beacons (CEB) project - is to evaluate currently available frameworks that measure and operationalise Circular Economy (CE), with a particular focus on the urban context. The regional focus lies on the Western Balkan region, which is at the centre of the project. Such "Urban Circularity Hotspot Frameworks" (UCHF) aim at providing decision support for policy makers, companies, citizens etc. regarding the transition to CE within cities. Based on the analysis of different frameworks, suggestions are derived regarding UCHF suitable for the specific characteristics of Western Balkan municipalities, i.e. a Circular Economy Beacons Urban Circularity Hotspot Framework (CEB-UCHF) ready for short-term implementation.

Description: Circular economy seems a vital enabler for sustainable use of natural resources which is also important for achieving the 2030 agenda for sustainable development goals. Therefore, a special session addressing issues of "sustainable solutions and remarkable practices in circular economy focusing materials downstream" was held at the 16th International Conference on Waste Management and Technology, where researchers and attendees worldwide were convened to share their experiences and visions. Presentations focusing on many key points such as new strategies, innovative technologies, management methods, and practical cases were discussed during the session. Accordingly, this article compiled all these distinctive presentations and gave insights into the pathway of circular economy towards the sustainable development goals. We summarized that the transition to circular economy can keep the value of resources and products at a high level and minimize waste production; the focus of governmental policies and plans with the involvement of public-private-partnership on 3Rs (reduce, reuse, and recycle) helps to improve the use of natural resources and take a step ahead to approach or achieve the sustainability.

Description: In Germany, the number of renewable energy prosumers has increased rapidly since 2000. However, the development of prosumers has faced and will continue to face various economic, social, and technological challenges, which have triggered the emergence of a number of innovative business models (BM). This paper enriches the empirical basis for prosumer-oriented BMs by investigating two BM innovations in Germany (P2P electricity trading and aggregation of small-size prosumers) drawing on business model and socio-technical transition theories. A mix of qualitative data collection methods, including document analysis and semi-structured expert interviews, was applied. We found that while both BMs can potentially address the challenges associated with renewable energy prosumer development in Germany, small-scale prosumers’ participation in both BMs has been limited so far. We identified various internal and external drivers and barriers for scaling up these BMs for prosumer development in Germany. Despite these barriers, both aggregation and centralized P2P targeting prosumers may potentially be also taken up by incumbent market actors such as utilities. Decentralized P2P on the other hand still faces significant internal and external barriers for upscaling. Based on the analysis, the paper provides policy recommendations with respect to the identified drivers and barriers. From a theoretical perspective, our findings provide further evidence to challenge the dichotomous understanding of niche actors and incumbents, the latter of which are often theorized to be resistant to radical innovations.

Description: How do recent changes in consumption in the wake of the COVID-19 pandemic affect the avoidance of packaging waste? How can an increase in packaging waste be countered and the previous trend towards unpackaged and reusable solutions be revived and promoted? To tackle these questions, we use a systemic approach that regards packaging as a network of interrelated interests of industry (manufacturing and logistics), trade (retail and catering), consumers and the waste management sector. To analyse this network, we applied three methods. First, we analysed secondary sources such as surveys. Second, we conducted semi-structured interviews with seven actors from industry, consumer education and waste management in May and June 2020. Third, we used the questions from the interview guideline to do an online survey among representatives of the public waste management industry.

Description: Die GLS Bank finanziert gezielt nachhaltige Projekte und Unternehmen in den Bereichen erneuerbare Energien, nachhaltige Wirtschaft, Ernährung, Wohnen, Bildung & Kultur, Soziales & Gesundheit. Eine zentrale Herausforderung ist es, die Nachhaltigkeitswirkung der Finanz- und Anlagestrategie robust zu quantifizieren und transparent darzustellen. Die GLS Bank hat sich zum Ziel gesetzt, die hierfür notwendigen Methoden und Daten zur Bewertung der Nachhaltigkeitswirkungen ihres Finanz- und Anlagenportfolios schrittweise weiterzuentwickeln, um eine richtungssichere Portfoliosteuerung und Kundenbetreuung zu unterstützen. Ziel des Projektes ist zunächst, das Emissionsgeschehen der finanzierten Wertschöpfungskette abzubilden (Scope 3), aber auch die eingesparten Emissionen als einen Beitrag zum Klimaschutz zu bewerten (Scope 4). Es werden die Scope 3 Emissionen der GLS Bank in den folgenden Finanz- und Anlagebereichen für das Berichtsjahr 2019 bilanziert: 1. Aktien- und Klimafonds; 2. Kredite; 3. Unternehmensbeteiligung. Scope 4 Emissionen werden in Form vermiedener Emissionen (Carbon Handprint) dabei ausschließlich für Bereiche bilanziert, in denen THG-Reduktionspotentiale richtungssicher abgeschätzt werden können. Im vorliegenden Bericht wird der Untersuchungsrahmen, die vom Wuppertal Institut entwickelte Methodik sowie Lösungsstrategien für die Überbrückung geringer Datenqualität/-verfügbarkeit beschrieben. Die Robustheit der Ergebnisse wird durch Prüfungsmethoden reflektiert und dem Leser somit eine Interpretationsunterstützung gegeben. In einem Ausblick werden Weiterentwicklungsbedarfe und -möglichkeiten skizziert, um schrittweise eine zunehmend robuste und wissenschaftliche fundierte Methodik und Datengrundlage zur Bewertung der Klimawirkung sowie weiterer Nachhaltigkeitswirkungen des Finanz- und Anlageportfolios der GLS Bank in Zusammenarbeit mit relevanten Stakeholdern zu etablieren.

Description: Damit sich die weltweit zunehmend ambitionierten Klimaschutzziele erreichen lassen, müssen auch im Industriesektor weitgehende Emissionsreduktionen innerhalb weniger Jahrzehnte realisiert werden. Expertinnen und Experten sind sich einig, dass dies nicht ohne den Umstieg von fossilen auf erneuerbare Energieträger und Rohmaterialien - sogenannte Feedstocks - umsetzbar ist. Im Zuge der verstärkten Nutzung dieser grünen Energieträger ist denkbar, dass sich deren Verfügbarkeit und Kosten zu immer wichtigeren Standortfaktoren für die Produktion industrieller Güter entwickeln werden. Dies könnte dazu führen, dass zukünftig Standorte mit kostengünstiger Verfügbarkeit von erneuerbaren Energien attraktiver gegenüber anderen Standorten werden und es dann zu Standortverlagerungen kommt - insbesondere im Bereich der energieintensiven Industrie. In dem vorliegenden Artikel greifen die Autoren diese möglichen Verlagerungen industrieller Produktion auf. In diesem Zusammenhang führen sie auch den Begriff "Renewables Pull" ein. Die in bestimmten Regionen der Welt kostengünstig und in großen Mengen verfügbaren erneuerbaren Energien könnten nach Ansicht der Autoren künftig eine Sogwirkung auslösen und bestimmte Teile der industriellen Produktion anziehen - auch Pull-Effekt genannt.

Description: The transition from today's "take, make, waste" economic paradigm to a circular economy requires a joint effort from actors on all levels: governments, business, and civil society. While companies are among the drivers of the circular transformation, they find it hard to achieve a circular economy on their own. Hence, cross-industry collaboration is one of the imperatives for scaling a circular economy. Against this background, econsense, together with Accenture and the Wuppertal Institute, launched its study "Germany's Transition to a Circular Economy - How to Unlock the Potential of Cross-Industry Collaboration". Based on a survey and expert interviews within the econsense community, the study finds that companies are yet to unlock the full potential of cross-industry collaboration. While two thirds of analysed industry collaborations have a high potential for scaling the circular economy, only 43 per cent of those already show a high degree of interaction. The study provides concrete guidance for companies to get started with circularity and identify the right partners for cross-industry collaboration. Specifically, the report recommends companies: 1) Understand what circularity is about and map it on their own operations and processes. 2) Understand the different circular business models and identify the ones relevant to each business. 3) Discover areas where collaboration can help to create the needed foundation and to execute circular actions.

Description: Digitalisation is taking place at a fast pace in all European countries and it is transforming the economies, societies, communication, jobs and the necessary skills for the workplace and everyday life. The Covid-19 pandemic is also accelerating digitalisation at many levels. To address the great challenges resulting from this, the European Commission has launched the Green Deal, a long-term transformation strategy towards an innovative and sustainable society. Three important initiatives under the Green Deal are the New Circular Economy Action Plan, the Biodiversity Strategy for 2030 and the Zero Pollution Action Plan. The various strategies and action plans draw up a large portfolio of measures, instruments and milestones that are always linked to digital technologies. Ideally, these are eco-innovative and sustainable and contribute to improving living conditions in Europe. The EIO Biennial Report 2020, which looks at a different topic every two years, considers digitalisation a major opportunity to accelerate the transition to a circular Europe. In the current report, the authors provide an overview of eco-innovation trends, illustrated by digital technology and policy practices that can further drive the circular economy.

Description: Auf dem Weg zu einer ressourceneffizienten Gesellschaft bedarf es richtiger Rahmenbedingungen, Informationen und Handlungsalternativen. Eine Möglichkeit, diese Voraussetzungen zu schaffen, ist ein kommunales Zero-Waste-Konzept. Zero Waste lässt sich übersetzen mit "Null Abfall, null Verschwendung" und verfolgt das Ziel, möglichst wenig Abfall zu produzieren sowie effizient und sparsam mit Ressourcen umzugehen. Ein solches Konzept wie in Kiel ist die Basis für eine Zertifizierung als Zero Waste City, eine Auszeichnung, die der europäische Verein Zero Waste Europe vergibt. 2007 wurde die italienische Gemeinde Capannori zur ersten Zero Waste City in Europa erklärt, seitdem sind knapp 400 europäische Gemeinden dieser Bewegung gefolgt.

Description: Öffentliche Mittel für die Unterstützung von Unternehmen sollten bestenfalls so eingesetzt werden, dass sie eine möglichst große, nachhaltige Wirkung haben und mit einem gesellschaftlichen Nutzen verbunden sind. Das kann unmittelbar erfolgen, in dem die konkrete Förderung an bestimmte Vorgaben gebunden wird, wie etwa den Ausbau von zukunftsfähigen Infrastrukturen. Es besteht jedoch auch die Möglichkeit, die Risikoabsicherung von Unternehmen - beispielsweise über Bürgschaften oder andere geeignete Finanzierungskonditionen - an der Nachhaltigkeitsperformance der Unternehmen auszurichten. Der vorliegende vierstufige Leitfaden, den der WWF Deutschland und das Wuppertal Institut entwickelt haben, dient als Grundlage für die zielorientiertere Vergabe von Mitteln und deren praktische Umsetzung. Er baut auf der von der Europäischen Union entwickelten "Taxonomie" für nachhaltige Investitionen auf. Darin enthalten sind Grenzwerte, welche die Nachhaltigkeitsperformance wirtschaftlicher Aktivitäten definieren. Auf diese Weise lässt sich filtern, ob ein wirtschaftliches Vorhaben zukunftsfähig ist. Hierbei unterstützt der "Entscheidungsbaum" des Leitfadens die Anwendung der EU-Taxonomie als Regelwerk.

Description: Diese Kurzstudie ist Teil des Verbundvorhabens "Circular Economy als Innovationsmotor für eine klimaneutrale und ressourceneffiziente Wirtschaft (CEWI)" der Stiftung 2°, dem WWF Deutschland und dem Wuppertal Institut und hat zum Ziel, die Potenziale des Gebäudesektors und der dazugehörigen Wertschöpfung im Hinblick auf die Umsetzung von zirkulären Ansätzen zu analysieren und den Beitrag zur Ressourceneinsparung und dem Klimaschutz zu bewerten. Das Ergebnis dieser Kurzstudie leitet sich aus einem intensiven Bewertungsprozess verschiedener Maßnahmen-Cluster ab und besteht aus sechs Handlungsfeldern, die ein Potenzial für den Ausbau von Klimaneutralität und Ressourceneffizienz im Gebäudesektor aufweisen. Diese Handlungsfelder bilden die Grundlage für den weiteren Projektverlauf von CEWI, in dem Industrieakteure in Workshops gemeinsam Pilotprojekte modellieren werden.

Description: Diese Kurzstudie ist Teil des Verbundvorhabens "Circular Economy als Innovationsmotor für eine klimaneutrale und ressourceneffiziente Wirtschaft (CEWI)" der Stiftung 2°, dem WWF Deutschland und dem Wuppertal Institut und hat zum Ziel, die Potenziale des Automobilsektors und der dazugehörigen Wertschöpfung im Hinblick auf die Umsetzung von zirkulären Ansätzen zu analysieren und den Beitrag zur Ressourceneinsparung und dem Klimaschutz zu bewerten. Das Ergebnis dieser Kurzstudie leitet sich aus einem intensiven Bewertungsprozess verschiedener Maßnahmen-Cluster ab und besteht aus sechs Handlungsfeldern, die ein Potenzial für den Ausbau von Klimaneutralität und Ressourceneffizienz im Automobilsektor aufweisen. Diese Handlungsfelder bilden die Grundlage für den weiteren Projektverlauf von CEWI, in dem Akteure aus der Praxis in Workshops gemeinsam Pilotprojekte modellieren werden.

Description: Die Wirtschaftsförderung Region Stuttgart GmbH (WRS) unterstützt die Transformation der Region Stuttgart in Richtung Nachhaltigkeit und sieht die Bioökonomie als eine wichtige Strategie zu diesem Zweck. Die WRS hat das Wuppertal Institut mit dieser Kurzstudie mit dem Fokus auf die industrielle Bioökonomie beauftragt, um eine Informationsgrundlage für die Spezifikation weiterer Aktivitäten der WRS im Kontext der Bioökonomie zu schaffen. Die Studie gibt einen Überblick über definitorische Ansätze und Diskurslinien der Bioökonomie. Sie fasst Einschätzungen des deutschen Bioökonomierates zu Marktpotenzialen der Bioökonomie in verschiedenen Branchen zusammen, die u.a. für Automobil, Biotechnologie und IKT als gut eingeschätzt werden. Anschließend umreißt die Studie die Innovationsansätze Biomimikry und Biointelligenz. Für den Ansatz Biointelligenz zur biologischen Transformation der industriellen Wertschöpfung werden die in Studien von Dritten identifizierten Marktpotenziale der Biointelligenz zusammengefasst, u.a. in den Bereichen Unterstützungssysteme, Produktionssysteme/-technologien und Baumaterialien. Darüber hinaus stellt die Studie Schnittstellen relevanter Landesstrategien in Baden-Württemberg zu Bioökonomiethemen dar, die synergetisch genutzt werden könnten. Ergänzend gibt die Studie einen Überblick über die Akteurslandschaft in Baden-Württemberg. Der Überblick basiert insbesondere auf dem Bioökonomie Kompetenzatlas wissenschaftlicher Akteure, der von der Landeskoordinierungsstelle an der Universität Hohenheim herausgegeben wird, sowie einer Akteursanalyse aus dem Projekt "Bioökonomie in Baden-Württemberg", das am KIT durch das ITAS durchgeführt wurde und durch die BIOPRO Baden-Württemberg GmbH unterstützt wurde. Auf Basis dieser Informationssammlung entwirft die Studie weiterführende Fragen in Bezug auf mögliche weitere Aktivitäten der WRS im Kontext der Bioökonomie, u.a. die mögliche Nutzung von Innovationsansätzen aus dem Bereich der Living Lab und Reallaborforschung.

Description: Two thirds of today's world trade is based on global value chains and supply networks. Purely regional supply chains have become less important in recent decades. The effects of these globalised structures are manifold. On the one hand, they promote employment and generate prosperity. On the other hand, they are beset by extreme social, ecological and economic imbalances. The COVID-19 pandemic has demonstrated the fragility of existing supply chain systems. The lockdown continues to disrupt complex supply chains and many problems of existing production and consumption continue to worsen. COVID-19 is one example of the crises that can shake globally networked supply chains in the short term. Other crises, such as climate change, develop more insidiously and are less immediately recognisable. Different as they are, such crises have one thing in common: they highlight the vulnerability of global social and economic structures and illustrate the impact of global trade on the regions and people of the world. This is precisely where global sustainability strategy comes in - it aims to fundamentally reduce differences and inequalities in opportunities and quality of life. The COVID-19 pandemic has forced the entire world into upheaval, creating an opportunity to make sustainability a central political resilience strategy. In the wake of the Corona pandemic, the discussion about resilient communities has flared up. In order to guarantee supply in the face of such crises, these should be more strongly regional and circular in their economic approach and global and sustainable in their perspective. The aim should be sustainable, transparent, non-exploitative supply chains that guarantee the security of supply to cover basic needs and public services despite sudden changes and crises. This discussion paper draws a future scenario of globally cooperative, circular regional economies that fundamentally reduce global inequalities in opportunities and quality of life, while at the same time permanently preserving the natural foundations of life.

Description: Immer mehr Unternehmen verkünden, klimaneutral sein zu wollen und zahlreiche Firmen bieten bereits klimaneutrale Produkte oder Dienstleistungen an: Von der klimaneutralen Paketzustellung bis zur Flugreise. Doch was bedeuten die Neutralitätsziele der Unternehmen genau? Ist das gesetzte Ziel ambitioniert? Und welche Rolle spielt Offsetting, also der Ankauf von Klimaschutzzertifikaten und deren Anrechnung auf das eigene Klimaschutzziel? Die hinter den verkündeten Zielen stehenden Ansätze sind häufig nur schwer nachvollziehbar. Vor diesem Hintergrund gibt der vorliegende Zukunftsimpuls zehn Empfehlungen für die Festlegung und Umsetzung von Neutralitätszielen. Die Autorinnen und Autoren sprechen sich dabei unter anderem für die Nutzung einer robusten Datenbasis als Grundlage für Neutralitätsziele aus, betonen die Bedeutung einer transparenten Kommunikation und zeigen auf, welche Rolle Offsetting spielen sollte. So sollten angekaufte Klimaschutz-Zertifikate einen möglichst begrenzten Beitrag zur Zielerfüllung leisen und ausschließlich zum Ausgleich von Emissionen genutzt werden, die nicht reduziert oder vermieden werden können. Insgesamt sollten Neutralitätsziele nicht zum alleinigen Kriterium für ambitionierten Klimaschutz von Unternehmen gemacht werden, sie stellen vielmehr ein Baustein einer weitaus umfassenderen unternehmerischen Klimaschutzstrategie dar.

Description: With increasing world population and an unsettling resource scarcity in the back, sustainble consumption has moved to the foreground of political, economical and social discussions. One major school-of-thought is Circular Economy (CE), an approach summarizing various sustainable consumption activites under one roof. However, quantitative studies on the consumer are rare, yet crucial for a transfer from linear to circular consumption. This dissertation adds to literature by providing pioneer insights into consumer behavior in CE as an overarching concept, instead limiting research on singular subconcepts. Namely, four consumer activities are studied: recycling, upcycling, renting and sharing. In order to identify relevant insights for both academics and practitioners in CE, the research question ("what drives participation in CE?") is broken down into sub-hypotheses, which are addressed by three empirical studies. Using the SOR-Model (adaption Belk 1975) as overarching logic, the three studies deal with (1) the consumer (and their motivation) and situational stimuli (both (2) offline and (3) online). Respectively, three data sets are consulted to assess the sub-hypotheses and to identify overarching insights on how to accelerate consumer participation in CE, The research methodology employed ranges from a structured equation model (SEM), a random allocation field experiment during Fashion Week in Berlin to a discrete-choice model with best-worst scaling. The dissertation succeeds in revealing that (1) different activities in CE can be summarized in one latent variable, proving CE as a wholesome concept in consumer-related activities; that (2) Trust has a leveraging effect on participation in CE activities. Further, Trust can be enhanced offline via face-to-face interaction and online via third-party online attributes.; and that (3) experience in CE activities affects perception of online attributes, implying the need for adapted measures when dealing with CE-unexperienced consumers as compared to consumers with prior experience in CE activities.

Description: Industrial demand response can play an important part in balancing the intermittent production from a growing share of renewable energies in electricity markets. This paper analyses the role of aggregators - intermediaries between participants and power markets - in facilitating industrial demand response. Based on the results from semi-structured interviews with German demand response aggregators, as well as a wider stakeholder online survey, we examine the role of aggregators in overcoming barriers to industrial demand response. We find that a central role for aggregators is to raise awareness for the potentials of demand response, as well as to support implementation by engaging key actors in industrial companies. Moreover, we develop a taxonomy that helps analyse how the different functional roles of aggregators create economic value. We find that there is considerable heterogeneity in the kind of services that aggregators offer, many of which do create significant economic value. However, some of the functional roles that aggregators currently fill may become obsolete once market barriers to demand response are reduced or knowledge on demand response becomes more diffused.

Description: The study sheds light on the background of the prevention of plastic waste from packaging and disposable products by explaining the need for action, the environmental impacts and risks to human health. Experiences of the members of the PREVENT Waste Alliance and their partners in the prevention of plastic waste by multi-actor partnerships are presented by means of 17 best practice examples. Finally, the study gives recommendations for the reduction of plastic waste and the further work of the PREVENT Waste Alliance. These include success factors for waste prevention, necessary next steps and conclusions regarding the necessary political framework conditions.

Description: Die beiden mächtigsten Energiekonzerne in Deutschland fusionieren wechselseitig ihre Geschäftsfelder. Das Ergebnis wird eine bisher nie dagewesene Marktbeherrschung im Energiesektor darstellen. Die beiden Autoren beleuchten den Deal und kritisieren die Untätigkeit sämtlicher Aufsichtsbehörden.

Description: Prepaid-Stromzähler sind in Deutschland noch selten, bieten jedoch zukünftig einen interessanten Markt. Vor allem kleinere Anbieter, aber auch erste Regionalversorger kombinieren die Megatrends Digitalisierung und Energiewende und kreieren daraus neue Dienstleistungen. Zusammen mit IT-Firmen entwickeln sie daraus neue Geschäftsideen, die auch hinsichtlich sozialer Aspekte hohen Anforderungen genügen. Der Rollout von Smart Metering-Lösungen eröffnet zukünftig noch größere Chancen, durch Echtzeit-Datenerfassung den Energieverbrauch und damit auch Einsparpotenziale transparent zu machen. Hochaufgelöste Daten ermöglichen innovative Dienstleistungen und bringen die Kundenbeziehung auf eine neue Ebene.

Description: Mehr als sechs Millionen Tonnen Kunststoffabfälle fallen in Deutschland jährlich an, nur etwas weniger als die Hälfte kann werk- und rohstofflich genutzt werden, der Rest wird verbrannt. Gerade gemischte Kunststoffarten erschweren das Recycling. Hier bietet sich das chemische Recycling (Pyrolyse) an. Bei diesem Verfahren werden die Stoffe durch hohe Temperaturen zersetzt und in kleinere Moleküle aufgespalten. Diese lassen sich im Sinne der Kreislaufwirtschaft in neue Kunststoffe oder chemische Grundstoffe überführen. Die Schätzungen gehen von bis zu zwei Millionen Tonnen Kunststoffabfall jährlich aus, der auf diese Weise wiederverwendet werden könnte. Das vorliegende Diskussionspapier zeigt, dass Pyrolyse von gemischten Kunststoffabfällen die chemische Industrie sowie die Abfallwirtschaft klimafreundlicher gestalten kann. Im Papier geht das Autorenteam auf die Potenziale und Entwicklungsperspektiven für Nordrhein-Westfalen ein mit dem Ziel, wissenschaftliche Grundlagen für Investitionsentscheidungen und Projektentwicklung im Sinne der Kreislaufwirtschaft zu schaffen.

Description: Die Emscher-Lippe Region ist seit vielen Jahren von einer intensiven wirtschaftlichen Transformation geprägt. Die fortschreitende De-Industrialisierung bzw. die Neuorientierung der Industrie nach dem Wegfall der Kohle- und Stahlindustrie stellt regionale Entscheidungsträger vor große Herausforderungen, wenn es darum geht, der hohen Arbeitslosenquote zu begegnen, Beschäftigungsquoten zu sichern, mit der prekären Finanzsituation in den kommunalen Haushalten umzugehen und den Wirtschaftsstandort zu stabilisieren und neu aufzustellen. Der Strukturwandel der Region ist mit Schließung der letzten Steinkohle-Zeche Ende 2018 nicht abgeschlossen, sondern geht mit dem Kohleausstieg im Energiesektor in eine zweite Phase. Dies sollte auch als Chance verstanden werden, den Wirtschaftsstandort Emscher-Lippe mit seinen energiereichen Industrien innovativ neu zu gestalten und die Region sowohl energetisch, als auch stofflich von der Nutzung fossiler Träger abzukoppeln. Eine wichtige Säule der regionalen Wirtschaftsförderung besteht darin, strategische Netzwerke und regionale Wertschöpfungsketten zu stärken, um die in der Region ansässigen (mittelständischen) Unternehmen zu unterstützen und den Strukturwandel innerhalb der dominierenden Industrien aus den Bereichen Energieerzeugung und chemischer Industrie zu begleiten. Die vorliegende Studie bereitet auf, welche Bedeutung die Wasserstoffwirtschaft in der Emscher-Lippe Region in diesem Zusammenhang derzeit spielt und zukünftig spielen könnte.

Description: Die Europäische Union (EU) hat erkannt, dass das Ziel der Klimaneutralität bis 2050 ein zentraler Innovations- und Wachstumsmotor für Industrie und Wirtschaft in der EU sein kann. Neben großen Chancen stellt dies die europäische Wirtschaft und überwiegend die besonders emissionsintensiven sowie im international starkem Wettbewerb stehenden Grundstoffindustrien auch vor erhebliche Herausforderungen. Eine integrierte Klima- und Industriestrategie ist für den Klimaschutz von zentraler Bedeutung, da auf die Produktion von Stahl, Zement, Grundstoffchemikalien, Glas, Papier und anderen Materialien in der EU und weltweit rund 20 Prozent der gesamten Treibhausgasemissionen entfallen. Auch in einer treibhausgasneutralen Zukunft kann auf diese Materialien nicht verzichten werden. Zugleich ist die emissionsfreie Herstellung der Materialien technologisch sowie mit Blick auf die dafür erforderlichen Infrastrukturen besonders herausfordernd. Dies gilt vor allem für die Frage woher die hohen benötigten Mengen an grüner Energie - insbesondere Strom und Wasserstoff - zu wettbewerbsfähigen Preisen kommen sollen. Analysen zeigen, dass trotz erheblicher Kosten bei der Prozessumstellung die Kosten der Transformation der Grundstoffindustrie für die Gesellschaft insgesamt tragbar sind. Denn bezogen auf die Endprodukte betragen die Mehrkosten meist nur wenige Prozentpunkte; die Preise von Rohstahl oder Zement dagegen würden sich zwischen einem Drittel und 100 Prozent verteuern. Da fast alle Grundstoffhersteller in starker Weltmarktkonkurrenz stehen, können sie die Investitionen in eine klimaneutrale Produktion und die benötigten Energieinfrastrukturen aber nicht ohne Unterstützung tragen. Das vorliegende Papier skizziert ein integriertes Klima-Industriepolitikpaket, das der EU ermöglichen kann, die bestehende technologische Führung in vielen dieser Industrien zielgerichtet zum Aufbau einer treibhausgasneutralen Grundstoffindustrie zu nutzen.

Description: The concept Material Input per Service Unit (MIPS) was developed 20 years ago as a measure for the overall natural resource use of products and services. The material intensity analysis is used to calculate the material footprint of any economic activities in production and consumption. Environmental assessment has developed extensive databases for life cycle inventories, which can additionally be adopted for material intensity analysis. Based on practical experience in measuring material footprints on the micro level, this paper presents the current state of research and methodology development: it shows the international discussions on the importance of accounting methodologies to measure progress in resource efficiency. The MIPS approach is presented and its micro level application for assessing value chains, supporting business management, and operationalizing sustainability strategies is discussed. Linkages to output-oriented Life Cycle Assessment as well as to Material Flow Analysis (MFA) at the macro level are pointed out. Finally we come to the conclusion that the MIPS approach provides relevant knowledge on resource and energy input at the micro level for fact-based decision-making in science, policy, business, and consumption.

Description: Increasing concerns regarding the world's natural resources and sustainability continue to be a major issue for global development. As a result several political initiatives and strategies for green or resource-efficient growth both on national and international levels have been proposed. A core element of these initiatives is the promotion of an increase of resource or material productivity. This dissertation examines material productivity developments in the OECD and BRICS countries between 1980 and 2008. By applying the concept of convergence stemming from economic growth theory to material productivity the analysis provides insights into both aspects: material productivity developments in general as well as potentials for accelerated improvements in material productivity which consequently may allow a reduction of material use globally.The results of the convergence analysis underline the importance of policy-making with regard to technology and innovation policy enabling the production of resource-efficient products and services as well as technology transfer and diffusion.​

Description: In globalen Energieszenarien spielt die Windenergie eine wichtige Rolle für den zukünftigen Strommix. Die Technologie hat sich bewährt und die Windbranche entwickelt sich zu einer reifen Industrie. Während der bisherige Ausbau der Windenergie stark von deutschen und europäischen Unternehmen bestimmt wurde, sind nun chinesische und amerikanische Unternehmen auf dem Weltmarkt weitgehend führend. Das vorliegende Buch untersucht daher maßgebende Erfolgsfaktoren der deutschen Windbranche auf dem internationalen Markt und konzentriert sich auf zwei Bereiche: Zum einen wird die Anwendbarkeit der Erfolgsfaktorenforschung - ein Konzept aus dem strategischen Management - einer kritischen Prüfung unterzogen. Zum anderen werden in einer qualitativen Analyse Erfolgsfaktoren diskutiert, die für die vergleichsweise junge Branche wichtig sind. Entscheidend ist es demnach, Lösungen, Strategien oder Technologieentwicklungen aus anderen Branchen zu transferieren (Transferkompetenz) und eine gemeinsame Technologieentwicklung in der Wertschöpfungskette (Joint Development) zu etablieren.

Description: Die systematisch-intentionale Förderung von innovativen Unternehmensgründungen aus Universitäten und Forschungseinrichtungen bedarf einer ergänzenden Neuausrichtung, will sie sich zukünftig als noch legitimierter und effizienter erweisen. Dabei wird im Rahmen einer integrativen Gründungs- und Innovationsförderung aus Universitäten und Forschungseinrichtungen eine Programmatik entworfen, die sich insbesondere in Prototypen komplexer Zukunftsinnovationen manifestiert.

Description: Aufgrund der Reform des Erneuerbare-Energien-Gesetzes soll die Förderhöhe für Strom aus Photovoltaik-Freiflächenanlagen nun wettbewerblich über Ausschreibungen ermittelt werden. Dafür muss eine entsprechende Rechtsverordnung geschaffen werden. Für die Eckpunkte eines solchen Ausschreibungsdesigns hat das Bundeswirtschaftsministerium eine öffentliche Konsultation in Gang gesetzt, zu der auch das Wuppertal Institut zusammen mit dem Fraunhofer-Institut für Solare Energiesysteme ISE und weiteren Unterstützern eine Stellungnahme abgegeben haben. Ihre Empfehlung ist, die Ressourcen-/bzw. Landnutzung von PV-Freiflächenanlagen als wesentliches Kriterium in die Förderung einzubeziehen. Vor dem Hintergrund eines erhöhten Nutzungsdrucks auf den ländlichen Raum weisen sie darauf hin, dass ihr angestrebter Ausbau zu ökonomischen, ökologischen, politischen und gesellschaftlichen Konfliktkonstellationen führen könnte. Zugleich machen sie deutlich, dass es zur herkömmlichen Technologie eine Alternative, die Agrophotovoltaik-Freiflächentechnologie gibt, ein Anbausystem zur Produktion von landwirtschaftlichen Gütern unterhalb von PV-Modulen. Sie ermöglicht die simultane Erzeugung von PV-Strom und die Produktion von Nahrungsmitteln. Folgerichtig wird empfohlen, nicht die PV-Anlagen, sondern Freiflächen-Technologien zum Gegenstand der geplanten Pilotausschreibungen zu machen. Die Ausweitung herkömmlicher Anlagen sollte sich auf unterdurchschnittlich fruchtbare Ackerflächen beschränken.

Description: There are a variety of economic and ecological benefits to increased resource efficiency. Social, institutional and technical innovations can all contribute towards efficiency increases. Companies face different hurdles in fostering such innovation. Small and medium-sized companies are subject to specific constraints that may prevent them from benefiting from innovation-induced resource efficiency improvements. Qualitative interviews were conducted among German small and medium-sized enterprises (SMEs) and intermediaries to identify barriers for resource efficiency innovations and to elaborate a policy mix at the federal level that could help SMEs to overcome these. We found five major barriers to resource efficiency innovations in German SMEs, comprising deficits in innovation culture, inter-firm cooperation along the value chain, finance, awareness and take-up of government funds. We propose a distinct policy mix as a response to this situation. The policy mix comprises the interlocking and synergistic elements of government funding schemes, innovation agents and innovation laboratories.

Description: Although there are already some qualification offers available for enterprises to support resource efficiency innovations, the high potentials that can be identified especially for small and medium sized enterprises (SMEs) have not been activated until now. As successful change lies in the hands of humans, the main aim of vocational education has to be the promotion of organisational and cultural changes in the enterprises. As there is already a small but increasing number of enterprises that perform very well in resource efficiency innovations one question arises: What are typical characteristics of those enterprises? Leaning on a good-practice approach, the project "ResourceCulture" is going to prove or falsify the hypothesis that enterprises being successful with resource efficiency innovations have a specific culture of trust, which substantially contributes to innovation processes, or even initially enables them. Detailed empirical field research will light up which correlations between resource efficiency, innovation and cultures of trust can be found and will offer important aspects for the improvement of management instruments and qualification concepts for workplace training. The project seizes qualification needs that were likewise mentioned by enterprises and consultants, regarding the implementation of resource efficiency. This article - based on first empirical field research results - derives preliminary indications for the design of the qualification module for the target groups resource efficiency consultants and managers. On this basis and in order to implement "ResourceCulture" conceptual and methodological starting points for workplace training are outlined.

Description: Die Krisen der internationalen Finanzmärkte waren 1998 noch nicht Realität, Atomkraft galt in Deutschland unter der Regierung Kohl immer noch als Zukunftsoption für die kommenden Jahrzehnte und für eine Bundespolitik in Richtung Energiewende war weit und breit kein gesellschaftlicher Konsens in Sicht. Dennoch gab es schon vor der Energiewende Projekte, die sich der Steigerung der Energieeffizienz verschrieben hatten. Mit kombinierten Einspar- und Solarkraftwerken, die an Schulen mit finanzieller Bürgerbeteiligungen entstehen, sollte der Weg zu einer umweltverträglichen Energieversorgung für vier Schulen in Nordrhein-Westfalen eingeschlagen werden. Wie der vorliegende Projektbericht zeigt, konnten die Ziele des Vorhabens erreicht werden: Steigerung der Endenergieeffizienz, verstärkte Nutzung erneuerbarer Energien und der Einsatz dezentraler Kraft-Wärme-Kopplung.

Description: The food and agricultural sector will face numerous challenges in the next decades, arising from changing global production and consumption patterns, which currently go along with high resource use, causing ecological and socio-economic impacts. The aim of this paper is to illustrate and evaluate the practical applicability of the Hot Spot Analysis methodology in the context of supply chain management in companies. The HSA is a method to identify social and ecological problems along the entire life cycle of a product. Special emphasis is put on a customized implementation in the value chain beef of McDonald's Germany. The HSA of McDonald's beef value chain shows that the main ecological problems arise in the phase of raw material extraction, whereas the main social problems can be identified in the phase of slaughtering. Finally, the paper shows potentials and shortcomings of such a customized application and how the results can be implemented in the sustainability management of a company.

Description: Critical metals are in great demand by the electrical and electronics industry, so waste electrical and eletronic equipment represents a significant source of secondary raw materials. Owing to low recycling rates and the concomitant supply risks associated with critical metals, the closure of the material cycles is highly relevant to the German economy. Losses of these metals occur from collection until their material recovery, along the entire disposal chain of waste electrical and electronic equipment. This paper develops planning criteria for the design of collection groups to achieve higher recovery amounts of such metals. The aim is to clarify what amounts of metals exist, both product-specific and on the market, how the dismantling of the products is constructed and how collection groups can be arranged with planning criteria oriented towards resource conservation. The analysis is a snapshot using the example of indium and selected products. A procedure is presented and findings identified which are transferable to various critical metals and to waste electrical and electronic equipment. The results show that grouping of products according to resource amounts and the dismantling effort enables forward-looking and resource-efficient planning of the treatment of every single collection group.

Description: This paper reflects the socio-economic power of renewable energy production cooperatives for a wider energy system transformation in Germany. Energy cooperatives have turned into important supporters of renewable and decentralised energy structures, due to their strong growth since the year 2006, their participation in local renewable energy projects and their democratic awareness. The cooperative form of coordinating local renewable energy projects applies to a decentralised energy system that is managed by many smaller firms - a system concept that is preferred by the majority of German citizens. However, there is not enough knowledge to understand to what extent this organisational form is able to unify a broad group of actors in promoting a renewable energy system (societal power) and to gather capital for elaborating renewable energy supply structures (economic power). The reflection is based on an empirical assessment of all energy cooperatives that were registered in Germany before 31st December 2013. Their growth dynamic and their business approaches are discussed. A special focus lies on renewable energy production cooperatives. The study presents the development of their members, their capital, their profit and loss, as well as their investment intensity over a timeframe of three years (2010-2012). The socio-economic potential of renewable energy production cooperatives for supporting a renewable energy system is discussed against the background of empirical results.

Description: Die elektrische Energieversorgung von Kommunen wird nach einer Privatisierungswelle Ende der 1990er Jahren mehr und mehr wieder in kommunale Hand zurückgeholt und Kommunen entdecken Chancen und Möglichkeiten, die sich dadurch ergeben. In Nordhessen ist ein Trend der Rekommunalisierung erkennbar durch die Neugründung von Stadt- und Gemeindewerken zur Elektrizitätsversorgung oder deren Weiterentwicklung. Dieser Prozess wird unter anderem durch die Städtische Werke Aktiengesellschaft, Kassel angetrieben, die als Partner die Kommunen insbesondere beim Rückkauf der Stromnetze, der Gründung von eigenen Stadtwerken und dem Vertrieb von Energieprodukten unterstützen. Gleichzeitig ist seit Mitte Dezember 2013 der Energieversorger E.ON Mitte AG von den nordhessischen und südniedersächsischen Landkreisen (zurück)gekauft und als Energie aus der Mitte GmbH & Co. KG (EAM) wieder in kommunaler Hand. Vor dem Hintergrund dieser Entwicklungen untersucht die vorliegende Arbeit den Prozess der Rekommunalisierung der Energieversorgung in Nordhessen und beschreibt die damit verbundenen Herausforderungen für die Kommunen. Am Beispiel von drei Kommunalwerken in Nordhessen wird die Fragestellung untersucht, wie der Prozess der Rekommunalisierung gestaltet werden kann und welche Teilprozesse wie Netzrückkauf, Vertrieb und Erzeugung mit welchen Herausforderungen verbunden sind. Auch die Frage, welche Bedeutung die Rekommunalisierung von E.ON Mitte AG hat, wird untersucht. Um möglichst viel Wissen über die Rekommunalisierungsvorgänge von beteiligten Personen zu erlangen, wurde das Erhebungsverfahren der leitfadengestützten Experteninterviews ausgewählt. Die Auswertung der erhobenen Daten erfolgte mit der Methodik Grounded Theory.

Description: PLLs for clock generation are essential for modern circuits, to generate specialized frequencies for many interfaces and high frequencies for chip internal operation. These circuits depend on analog circuits and careful tailoring for each new process, and making them fault tolerant is an incompletely solved problem. Until now, all digital PLLs have been restricted to sampled data DSP techniques and not available for the highest frequency baseband applications. This paper presents the design and preliminary evaluation of an all-digital baseband technique built entirely with an easily portable 10-cell digital library. The library is also described, as it aids in research and low volume design porting to new processes. The advantages of the digital approach are the wide variety of techniques available to give varying degrees of fault tolerance, and the simplicity of porting the design to new processes, even to exotic processes that may not have analog capability. The only tuning parameter is digital gate delay. An all-digital approach presents unique problems and standard analog loop stability design criteria cannot be directly used. Because of the quantization of frequency, there is effectively infinite gain for very small loop error feedback. The numerically controlled oscillator (NCO) based on a tapped delay line cannot be reliably updated while a pulse is active in the delay line, and ordinarily does not have enough frequency resolution for a low-jitter output.

Description: In this paper, a wireless capacitive pressure sensor developed for the health monitoring of aircraft engines has been demonstrated. The sensing system is composed of a Clapp-type oscillator that operates at 131 MHz. The Clapp oscillator is fabricated on a alumina substrate and consists of a Cree SiC (silicon carbide) MESFET (Metal Semiconductor Field Effect Transistors), this film inductor, Compex chip capacitors and Sporian Microsystem capacitive pressure sensor. The resonant tank circuit within the oscillator is made up of the pressure sensor and a spiral thin film inductor, which is used to magnetically couple the wireless pressure sensor signal to a coil antenna placed over 1 meter away. 75% of the power used to bias the sensing system is generated from thermoelectric power modules. The wireless pressure sensor is operational at room temperature through 400 C from 0 to 100 psi and exhibits a frequency shift of over 600 kHz.

Description: Previous work has shown that ultrasonic inspection provides a means of assessing electrical crimp quality that ensures the electrical and mechanical integrity of an initial crimp before the installation process is completed. The amplitude change of a compressional ultrasonic wave propagating at right angles to the wire axis and through the junction of a crimp termination was shown to correlate with the results of destructive pull tests, which is a standard for assessing crimp wire junction quality. Of additional concern are crimps made at high speed assembly lines for wiring harnesses, which are used for critical applications, such as in aircraft. During high-speed assembly it is possible that many faulty crimps go undetected until long after assembly, and fail in service. The position and speed of the crimping jaw become factors as the high-speed crimp is formed. The work presented in this paper is designed to cover the more difficult and more subtle area of high-speed crimps by taking into account the rate change of the measurements. Building on the previous work, we present an analysis methodology, based on transmitted ultrasonic energy and timing of the first received pulse that is shown to correlate to the gauge of the crimp/ferrule combination and the position of the crimping jaw. Results demonstrating the detectability of a number of the crimp failure pathologies, such as missing strands, partially inserted wires and incomplete crimp compression, are presented. The ability of this technique to estimate crimp height, a mechanical measure of crimp quality, is discussed.

Description: Overview presentation to the IAPG Chemical Working Group meeting, discussing current electrochemical power and energy storage R and D at NASA GRC including missions, demonstrations, and reserch projects. Activities such as ISS Lithium-Ion Battery Replacements, the Advanced Exploration Systems Modular Power Systems project, Enabling Electric Aviation with Ultra-High Energy Litium Metal Batteries, Advanced Space Power Systems project, and SBIR STTR work, will be discussed.

Description: A magnetic tunnel junction (MTJ)-based microwave detector is proposed and investigated. When the MTJ is excited by microwave magnetic fields, the relative angle between the free layer and pinned layer alternates, giving rise to an average resistance change. By measuring the average resistance change, the MTJ can be utilized as a microwave power sensor. Due to the nature of ferromagnetic resonance, the frequency of an incident microwave is directly determined. In addition, by integrating a mixer circuit, the MTJ-based microwave detector can also determine the relative phase between two microwave signals. Thus, the MTJ-based microwave detector can be used as an on-chip microwave phase and spectrum analyzer.

Description: NASA is developing high specific energy and high specific capacity lithium-ion battery (LIB) technology for future NASA missions. Current state-of-art LIBs have issues in terms of safety and thermal stability, and are reaching limits in specific energy capability based on the electrochemical materials selected. For example, the graphite anode has a limited capability to store Li since the theoretical capacity of graphite is 372 mAh/g. To achieve higher specific capacity and energy density, and to improve safety for current LIBs, alternative advanced anode, cathode, and electrolyte materials are pursued under the NASA Advanced Space Power System Project. In this study, the nanostructed metal oxide, such as Fe2O3 on carbon nanotubes (CNT) composite as an LIB anode has been investigated.

Description: Current ringing in an Inductive Pulsed Plasma Thruster (IPPT) can lead to reduced energy efficiency, excess heating, and wear on circuit components such as capacitors and solid state devices. Clamping off the current using a fast turn-off power diode is an effective way to reduce current ringing and increase energy efficiency. A diode with a shorter reverse recovery time will allow the least amount of current to ring back through the circuit, as well as minimize switching losses. The reverse recovery response of a new 5.8 kilovolt SiC PiN diode from Cree, Inc. in the IPPT plasma drive circuit is investigated using a physicsbased Simulink model, and compared with that of a 5SDF 02D6004 5.5 kilovolt fast-switching Si diode from ABB. Parameter extraction was carried out for each diode using both datasheet specifications and experimental waveforms, in order to most accurately adapt the model to the specific device. Further experimental data will be discussed using a flat-plate IPPT developed at NASA Marshall Space Flight Center and used to verify the simulation results. A final quantitative measure of circuit efficiency will be described for both the Si and SiC diode configuration.

Description: No abstract available

Description: High power density is required for application of electric motors in hybrid electric propulsion. Potential path to achieve high power density in electric motors include advanced materials, lightweight thermal management, lightweight structural concepts, high power density power electronics, and advanced manufacturing. This presentation will focus on two key technologies for achieving high power density, advanced magnets and additive manufacturing. The maximum energy product in current magnets is reaching their theoretical limits as a result of material and process improvements. Future improvements in the maximum energy product for magnets can be achieved through development of nanocomposite magnets combining the hard magnetic phase and soft magnetic phase at the nanoscale level. The presentation will provide an overview of the current state of development for nanocomposite magnets and the future path for doubling the maximum energy product. The other part of the presentation will focus on the role of additive manufacturing in fabrication of high power density electric motors. The presentation will highlight the potential opportunities for applying additive manufacturing to fabricate electric motors.

Description: (1) High energy (〉100keV) electrons penetrate spacecraft walls and accumulate in dielectrics or isolated conductors; (2) Threat environment is energetic electrons with sufficient flux to charge circuit boards, cable insulation, and ungrounded metal faster than charge can dissipate; (3) Accumulating charge density generates electric fields in excess of material breakdown strenght resulting in electrostatic discharge; and (4) System impact is material damage, discharge currents inside of spacecraft Faraday cage on or near critical circuitry, and RF noise.

Description: In this presentation, we provide a brief glimpse at preliminary single event test results taken from two years of testing of the Xilinx V5QV Field Programmable Gate Array (FPGA). This presentation includes an overview of test philosophy and implementation.

Description: A new development of on-board data processing platform has been in progress at NASA Langley Research Center since April, 2012, and the overall review of such work is presented in this paper. The project is called High-Speed On-Board Data Processing for Science Instruments (HOPS) and focuses on a high-speed scalable data processing platform for three particular National Research Council's Decadal Survey missions such as Active Sensing of CO2 Emissions over Nights, Days, and Seasons (ASCENDS), Aerosol-Cloud-Ecosystems (ACE), and Doppler Aerosol Wind Lidar (DAWN) 3-D Winds. HOPS utilizes advanced general purpose computing with Field Programmable Gate Array (FPGA) based algorithm implementation techniques. The significance of HOPS is to enable high speed on-board data processing for current and future science missions with its reconfigurable and scalable data processing platform. A single HOPS processing board is expected to provide approximately 66 times faster data processing speed for ASCENDS, more than 70% reduction in both power and weight, and about two orders of cost reduction compared to the state-of-the-art (SOA) on-board data processing system. Such benchmark predictions are based on the data when HOPS was originally proposed in August, 2011. The details of these improvement measures are also presented. The two facets of HOPS development are identifying the most computationally intensive algorithm segments of each mission and implementing them in a FPGA-based data processing board. A general introduction of such facets is also the purpose of this paper.

Description: No abstract available

Description: No abstract available

Description: No abstract available

Description: This study was undertaken to determine the single event effect (SEE) susceptibility of the commercial silicon carbide 1200V Schottky diode manufactured by Cree, Inc. Heavy-ion testing was conducted at the Texas A&M University Cyclotron Single Event Effects Test Facility (TAMU). Its purpose was to evaluate this device as a candidate for use in the Solar-Electric Propulsion flight project.

Description: Because wire failure in aerospace vehicles could be catastrophic, smart wiring capabilities have been critical for NASA. Through the years, researchers at Kennedy Space Center (KSC) have developed technologies, expertise, and research facilities to meet this need. In addition to aerospace applications, NASA has applied its knowledge of smart wiring, including self-healing materials, to serve the aviation industry. This webinar will discuss the development efforts of several wiring technologies at KSC and provide insight into both current and future research objectives.

Description: Demonstrate a DC transformer; a new electro-mechanical component with potentially high power applications.

Description: The development of transportation systems that use new and sustainable energy technologies is of utmost importance due to the possible future shortfalls that current transportation modes will encounter because of increased volume and costs. The introduction and further research and development of new transportation and energy systems by materials researchers at the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) and the Department of Transportation are discussed in this Technical Memorandum. In this preliminary study, airship concepts were assessed for cargo transportation using various green energy technologies capable of 24-hour operation (i.e., night and day). Two prototype airships were successfully constructed and tested at LaRC to demonstrate their feasibility: one with commercially available solar cells for operation during the daytime and one with microwave rectennas (i.e., rectifying antennas) developed in-house for night-time operation. The test results indicate the feasibility of a cargo transportation airship powered by new green energy sources and wireless power technology. Future applications will exploit new green energy sources that use materials and devices recently developed or are in the process of being developed at LaRC. These include quantum well SiGe solar cells; low, mid-, and high temperature thermoelectric modules; and wireless microwave and optical rectenna devices. This study examines the need and development of new energy sources for transportation, including the current status of research, materials, and potential applications.

Description: This report describes a modeling and simulation approach for disturbance patterns representative of the environment experienced by a digital system in an electromagnetic reverberation chamber. The disturbance is modeled by a multi-variate statistical distribution based on empirical observations. Extended versions of the Rejection Samping and Inverse Transform Sampling techniques are developed to generate multi-variate random samples of the disturbance. The results show that Inverse Transform Sampling returns samples with higher fidelity relative to the empirical distribution. This work is part of an ongoing effort to develop a resilience assessment methodology for complex safety-critical distributed systems.

Description: In order to facilitate the use of electric vehicles at NASA Langley Research Center (LaRC), charging stations should be made available to LaRC employees. The implementation of charging stations would decrease the need for gasoline thus decreasing CO2 emissions improving local air quality and providing a cost savings for LaRC employees. A charging station pilot program is described that would install stations as the need increased and also presents a business model that pays for the electricity used and installation at no cost to the government.

Description: The Soldier-Warfighter Operationally Responsive Deployer for Space (SWORDS) rocket is a dedicated small satellite launcher that will minimize danger and complexity in order to allow soldiers in the field to put payloads of up to 25kg into orbit from the field. The SWORDSG2 project is the development of a model, simulation, and ultimately a working application that will control and monitor the cryogenic fluid delivery to the SWORDS rocket for testing purposes. To accomplish this, the project is using the programming language environment Gensym G2. The environment is an all-inclusive application that allows development, testing, modeling, and finally operation of the unique application through graphical and programmatic methods. In addition, observation of the current cryogenic fluid delivery system in the Kennedy Space Center Cry Lab has allowed me to gain valuable experience of fluid systems and propelant delivery that is valuable to our team when developing amd modeling our own system.The ultimate goal of having a test-ready application to show to the heads of the project, and demonstrating G2's capabilities, by late 2014 will require hard work and intense study and understanding of not only the programming aspect but also the physical phenomena we want to model, observe, and control.

Description: Inductive Pulsed Plasma Thruster (IPPT) pulse circuits, such as those needed to operate the Pulsed Inductive Thruster (PIT), are required to quickly switch capacitor banks operating at a period of s while conducting current at levels on the order of at least 10 kA. [1,2] For all iterations of the PIT to date, spark gaps have been used to discharge the capacitor bank through an inductive coil. Recent availability of fast, highpower solid state switching devices makes it possible to consider the use of semiconductor switches in modern IPPTs. In addition, novel preionization schemes have led to a reduction in discharge energy per pulse for electric thrusters of this type, relaxing the switching requirements for these thrusters. [3,4] Solid state switches offer the advantage of greater controllability and reliability, as well as decreased drive circuit dimensions and mass relative to spark gap switches. The use of solid state devices such as Integrated Gate Bipolar Transistors (IGBTs), Gate Turnoff Thyristors (GTOs) and SiliconControlled Rectifiers (SCRs) often involves the use of power diodes. These semiconductor devices may be connected antiparallel to the switch for protection from reverse current, or used to reduce power loss in a circuit by clamping off current ringing. In each case, higher circuit efficiency may be achieved by using a diode that is able to transition, or 'switch,' from the forward conducting state ('on' state) to the reverse blocking state ('off' state) in the shortest amount of time, thereby minimizing current ringing and switching losses. Silicon Carbide (SiC) PiN diodes offer significant advantages to conventional fastswitching Silicon (Si) diodes for high power and fast switching applications. A wider band gap results in a breakdown voltage 10 times that of Si, so that a SiC device may have a thinner drift region for a given blocking voltage. [5] This leads to smaller, lighter devices for high voltage applications, as well as reduced forward conduction losses, faster reverse recovery time (faster turnoff), and lowermagnitude reverse recovery current. In addition, SiC devices have lower leakage current as compared to their Si counterparts, and a high thermal conductivity, potentially allowing the former to operate at higher temperatures with a smaller, lighter heatsink (or no heatsink at all).

Description: A test was conducted on an Advanced Triple Junction (ATJ) coupon that was part of a risk reduction effort in the development of a high-powered solar array design by SSL. The ATJ coupon was a small, 4-cell, two-string configuration that has served as the basic test coupon design used in previous SSL environmental aging campaigns. The coupon has many attributes of the flight design; e.g., substrate structure with graphite face sheets, integrated by-pass diodes, cell interconnects, RTV grout, wire routing, etc. The objective of the present test was to evaluate the performance of the coupon after being subjected to induced electrostatic discharge testing at two string voltages (100 V, 150 V) and four array current (1.65 A, 2.0 A, 2.475 A, and 3.3 A). An ESD test circuit, unique to SSL solar array design, was built that simulates the effect of missing cells and strings in a full solar panel with special primary arc flashover circuitry. A total of 73 primary arcs were obtained that included 7 temporary sustained arcs (TSA) events. The durations of the TSAs ranged from 50 s to 2.9 ms. All TSAs occurred at a string voltage of 150 V. Post-test Large Area Pulsed Solar Simulator (LAPSS), Dark I-V, and By-Pass Diode tests showed that no degradation occurred due to the TSA events. In addition, the post-test insulation resistance measured was 〉 50 G-ohms between cells and substrate. These test results indicate a robust design for application to a high-current, high-power mission application.

Description: No abstract available

Description: Increasing cell spacing decreased adjacent cell damage center dotElectrically connected adjacent cells drained more than physically adjacent cells center dotRadiant barrier prevents propagation when fully installed between BP cells center dotBP cells vent rapidly and expel contents at 100% SOC -Slower vent with flame/smoke at 50% -Thermal runaway event typically occurs at 160 degC center dotLG cells vent but do not expel contents -Thermal runaway event typically occurs at 200 degC center dotSKC LFP modules did not propagate; fuses on negative terminal of cell may provide a benefit in reducing cell to cell damage propagation. New requirement in NASA-Battery Safety Requirements document: JSC 20793 Rev C 5.1.5.1 Requirements - Thermal Runaway Propagation a. For battery designs greater than a 80-Wh energy employing high specific energy cells (greater than 80 watt-hours/kg, for example, lithium-ion chemistries) with catastrophic failure modes, the battery shall be evaluated to ascertain the severity of a worst-case single-cell thermal runaway event and the propensity of the design to demonstrate cell-to-cell propagation in the intended application and environment. NASA has traditionally addressed the threat of thermal runaway incidents in its battery deployments through comprehensive prevention protocols. This prevention-centered approach has included extensive screening for manufacturing defects, as well as robust battery management controls that prevent abuse-induced runaway even in the face of multiple system failures. This focused strategy has made the likelihood of occurrence of such an event highly improbable. b. The evaluation shall include all necessary analysis and test to quantify the severity (consequence) of the event in the intended application and environment as well as to identify design modifications to the battery or the system that could appreciably reduce that severity. In addition to prevention protocols, programs developing battery designs with catastrophic failure modes should take the steps necessary to assess the severity of a possible thermal runaway event. Programs should assess whether there are reasonable design changes that could appreciably affect the severity of the outcome. Evaluation should include environmental effects to surrounding hardware (i.e., temperature, pressure, shock), contamination effects due to any expelled contaminates, and venting propulsive effects when venting overboard.

Description: No abstract available

Description: A dielectric material includes a network of nanosubstrates, such as but not limited to nanotubes, nanosheets, or other nanomaterials or nanostructures, a polymer base material or matrix, and nanoparticles constructed at least partially of an elemental metal. The network has a predetermined nanosubstrate loading percentage by weight with respect to a total weight of the dielectric material, and a preferential or predetermined longitudinal alignment with respect to an orientation of an incident electrical field. A method of forming the dielectric material includes depositing the metal-based nanoparticles onto the nanosubstrates and subsequently mixing these with a polymer matrix. Once mixed, alignment can be achieved by melt extrusion or a similar mechanical shearing process. Alignment of the nanosubstrate may be in horizontal or vertical direction with respect to the orientation of an incident electrical field.

Description: A waveguide structure for a dual polarization waveguide includes a first flange member, a second flange member, and a waveguide member disposed in each of the first flange member and second flange member. The first flange member and the second flange member are configured to be coupled together in a spaced-apart relationship separated by a gap. The first flange member has a substantially smooth surface, and the second flange member has an array of two-dimensional pillar structures formed therein.

Description: The present invention relates to an electrically conductive membrane that can be configured to be used in fuel cell systems to act as a hydrophilic water separator internal to the fuel cell, or as a water separator used with water vapor fed electrolysis cells, or as a water separator used with water vapor fed electrolysis cells, or as a capillary structure in a thin head pipe evaporator, or as a hydrophobic gas diffusion layer covering the fuel cell electrode surface in a fuel cell.

Description: Recent testing of Enhanced Power Conversion (EPC) eGaN FET devices design for power use has shown that the devices are susceptible to Single-Event Effects (SEE) that degrade or destroy the device. The exact mechanism of the SEE is not known. The testing so far has been in the static condition, in the fully off condition, and with minimal load conditions. These conditions may not be worst case. This report presents the results of a study that tests some of the load conditions for SEE. The EPC2012 and EPC1012 were chosen for the test. The tests were performed the TAMU radiation effects facility in May and June of 2013.

Description: Time dependence of absorption voltages (V(sub abs)) in different types of low-voltage X5R and X7R ceramic capacitors was monitored for a maximum duration of hundred hours after polarization. To evaluate the effect of mechanical defects on V(sub abs)), cracks in the dielectric were introduced either mechanically or by thermal shock. The maximum absorption voltage, time to roll-off, and the rate of voltage decrease are shown to depend on the crack-related leakage currents and insulation resistance in the parts. A simple model that is based on the Dow equivalent circuit for capacitors with absorption has been developed to assess the insulation resistance of capacitors. Standard measurements of the insulation resistance, contrary to the measurements based on V(sub abs)), are not sensitive to the presence of mechanical defects and fail to reveal capacitors with cracks.

Description: This specification covers the general workmanship requirements and procedures for the complete installation and assembly of electrical ground support equipment (EGSE) such as terminal distributors, junction boxes, conduit and fittings, cable trays and accessories, interconnecting cables (including routing requirements), motor-control equipment, and necessary hardware as specified by the applicable contract and drawings.

Description: The goal of this project was to provide support for three different projects including RESTOR, CHREC Space Processor, and EMIST. LabVIEW software was written to verify tags in an excel spreadsheet, testing preparation was accomplished for CHREC, and full payload integration was completed for EMIST. All of these projects will contribute to advanced exploration in space and provide valuable experience.

Description: This document describes the results of EMI tests conducted to evaluate the EMI emissions of a 120VDC ISS Power Inverter operating with loads that cause its output to be distorted.

Description: No abstract available