ALBERT

Description: With the increasingly close relations between cities in China, it is of great significance to explore the regular characteristics of the intercity connection. Through Tencent’s population migration heat and Baidu map big data, this paper analyzes the regular characteristics of the relations between complex cities based on such index as the rich node propensity index, preference level index, and relative heat index and also investigates the influence of geographical proximity factors on the external relations of different cities. The research has the following results. Firstly, the relations between cities have obvious club characteristics. The rich nodes tend to connect with the rich nodes, while the nonrich nodes tend to connect with the nonrich nodes. Secondly, the connection between cities has the effect of hierarchical proximity, and cities mainly establish spatial connections with cities of the same level and adjacent level. Thirdly, the relations between cities also have the effect of geographical proximity, and the degree of influence of geographical proximity in low-level cities is greater than that in high-level cities. Fourthly, the external connection mode of high-level cities is to establish close contact with high-level cities adjacent to the level, with strong attraction to low-level cities adjacent to the location at the same time. The low-level cities are closely related to the high-level cities adjacent to the location and other cities of geographical proximity or adjacent level. This study helps to further understand the complex characteristics and laws of intercity connections and urban networks.

Description: Electroencephalography-(EEG-) based control is a noninvasive technique which employs brain signals to control electrical devices/circuits. Currently, the brain-computer interface (BCI) systems provide two types of signals, raw signals and logic state signals. The latter signals are used to turn on/off the devices. In this paper, the capabilities of BCI systems are explored, and a survey is conducted how to extend and enhance the reliability and accuracy of the BCI systems. A structured overview was provided which consists of the data acquisition, feature extraction, and classification algorithm methods used by different researchers in the past few years. Some classification algorithms for EEG-based BCI systems are adaptive classifiers, tensor classifiers, transfer learning approach, and deep learning, as well as some miscellaneous techniques. Based on our assessment, we generally concluded that, through adaptive classifiers, accurate results are acquired as compared to the static classification techniques. Deep learning techniques were developed to achieve the desired objectives and their real-time implementation as compared to other algorithms.

Description: As the externalized carrier of intrinsic value, value decision-making is an important factor affecting the social value system. As an old Chinese saying goes, “A friend in need is a friend indeed,” crisis environment provides the background for the conflicts of multiple values, while individual social value orientation (SVO) determines the ranking of the value states. This paper defined the SVO types by means of Slider Measure method on the basis of environment description, constructed a decision-making game model in accordance with SVO differences, and finally analysed the mechanism of people’s decision-making. Taking the epidemic situation as the background, this paper conducted an empirical analysis with the sample of college students. The results showed that the most SVO types of college students were prosocial orientation, followed by individualistic orientation, altruistic orientation, and competitive orientation. In the crisis environment, individual SVO type and decision-making constituted a mapping relationship. There was an equilibrium point in the decision of prosocial orientation, and the dominant decision of altruistic orientation or individualistic orientation is relatively stable.

Description: To solve the problems of current short-term forecasting methods for metro passenger flow, such as unclear influencing factors, low accuracy, and high time-space complexity, a method for metro passenger flow based on ST-LightGBM after considering transfer passenger flow is proposed. Firstly, using historical data as the training set to transform the problem into a data-driven multi-input single-output regression prediction problem, the problem of the short-term prediction of metro passenger flow is formalized and the difficulties of the problem are identified. Secondly, we extract the candidate temporal and spatial features that may affect passenger flow at a metro station from passenger travel data based on the spatial transfer and spatial similarity of passenger flow. Thirdly, we use a maximal information coefficient (MIC) feature selection algorithm to select the significant impact features as the input. Finally, a short-term forecasting model for metro passenger flow based on the light gradient boosting machine (LightGBM) model is established. Taking transfer passenger flow into account, this method has a low space-time cost and high accuracy. The experimental results on the dataset of Lianban metro station in Xiamen city show that the proposed method obtains higher prediction accuracy than SARIMA, SVR, and BP network.

Description: Natural polyphenols contained in olive mill wastewaters (OMW) have been usually associated with great bioactive properties as “antioxidants”. In this work, we recovered the polyphenols after adsorption onto natural clay “ghassoul” by different solvents: water, ethyl acetate, and methanol (PPW, PPA, and PPM, respectively) to avoid environmental pollution. Also, we tested the antioxidant activity of the extracted polyphenols by two methods: 1,1-diphenyl-2-picrylhydrazyl (DPPH) and total antioxidant capacity (TAC). Then, we analyzed antimicrobial activity by the microdilution technique to determine at the minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC). The OMW of the Fez-Meknes region has a very acidic pH, considerable amounts of mineral matter, and a high concentration of polyphenols and organic content. The results of the test from DPPH showed good antiradical potential for polyphenols extracted with water, but the TAC showed an important capacity for all extracts unless PPA. The antibacterial activity is not the same on the four bacteria studied (Escherichia coli, Salmonella sp, Staphylococcus aureus, and Enterococcus faecalis), and all extracts inhibit most tested germs that do not have the same MIC and the same sensitivity. Only the PPW showed the minimum bactericidal concentration (MBC) that is equal to 0.290 mg/mL for Salmonella sp and Staphylococcus aureus, which confirms that the extraction by water of the adsorbed polyphenols is an original solution to recover the polyphenols and also to obtain a natural phenolic antioxidant which can be used in the pharmaceutical, nourishment, and cosmetic industry.

Description: People are the most important factors of economy and the primary carriers of social culture. Cross-border migration brings economic and cultural impacts to the origin and destination and is also a key to reflect the international relations of related countries. In fact, the migration relationships of countries are complex and multilateral, but most traditional migration models are bilateral. Network theories could provide a better description of global migration to show the structure and statistical characteristics more clearly. Based on the estimated migration data and disparity filter algorithm, the networks describing the global multilateral migration relationships have been extracted among 200 countries over fifty years. The results show that the global migration networks during 1960–2015 exhibit a clustering and disassortative feature, implying globalized and multipolarized changes of migration during these years. The networks were embed into a Poincaré disk, yielding a typical and hierarchical “core-periphery” structure, which is associated with angular density distribution, and has been used to describe the “multicentering” trend since 1990s. Analysis on correlation and evolution of communities indicates the stability of most communities, yet some structural changes still exist since 1990s, which reflect that the important historical events are contributable to regional and even global migration patterns.

Description: Most of the existing knowledge graph embedding models are supervised methods and largely relying on the quality and quantity of obtainable labelled training data. The cost of obtaining high quality triples is high and the data sources are facing a serious problem of data sparsity, which may result in insufficient training of long-tail entities. However, unstructured text encoding entities and relational knowledge can be obtained anywhere in large quantities. Word vectors of entity names estimated from the unlabelled raw text using natural language model encode syntax and semantic properties of entities. Yet since these feature vectors are estimated through minimizing prediction error on unsupervised entity names, they may not be the best for knowledge graphs. We propose a two-phase approach to adapt unsupervised entity name embeddings to a knowledge graph subspace and jointly learn the adaptive matrix and knowledge representation. Experiments on Freebase show that our method can rely less on the labelled data and outperforms the baselines when the labelled data is relatively less. Especially, it is applicable to zero-shot scenario.

Description: Portfolio investment is adopted by the venture capital to diversify those risks involved in project selection, investing or operating so that the venture capitalist can expect a relatively stable income and lower financing risks. Based on the design of portfolio investment contract with unlimited funds developed by Kanniainen and Keuschnigg, and Inderst et al., this article makes a modification and presents a model given the limitation of funds available for the venture capitalist. It is demonstrated that the marginal benefit of efforts paid by the entrepreneurs exceeds the marginal cost, given the limitation of funds available, which will conduce to a high-level engagement of the entrepreneurs. Thus, by adopting the design of renegotiation contract, the venture capitalist can manage to stimulate the entrepreneurs to make efforts, which is to result in moral hazard reduction.

Description: Huge data on the web come from discussion forums, which contain millions of threads. Discussion threads are a valuable source of knowledge for Internet users, as they have information about numerous topics. The discussion thread related to single topic comprises a huge number of reply posts, which makes it hard for the forum users to scan all the replies and determine the most relevant replies in the thread. At the same time, it is also hard for the forum users to manually summarize the bulk of reply posts in order to get the gist of discussion thread. Thus, automatically extracting the most relevant replies from discussion thread and combining them to form a summary are a challenging task. With this motivation behind, this study has proposed a sentence embedding based clustering approach for discussion thread summarization. The proposed approach works in the following fashion: At first, word2vec model is employed to represent reply sentences in the discussion thread through sentence embeddings/sentence vectors. Next, K-medoid clustering algorithm is applied to group semantically similar reply sentences in order to reduce the overlapping reply sentences. Finally, different quality text features are utilized to rank the reply sentences in different clusters, and then the high-ranked reply sentences are picked out from all clusters to form the thread summary. Two standard forum datasets are used to assess the effectiveness of the suggested approach. Empirical results confirm that the proposed sentence based clustering approach performed superior in comparison to other summarization methods in the context of mean precision, recall, and F-measure.

Description: This paper considers the two-player location game in a closed-loop market with quantity competition. Based on the Cournot and Hotelling models, a circle model is established for a closed-loop market in which two players (firms) play a location game under quantity competition. Using a two-stage (location-then-quantity) pattern and backward induction method, the existence of subgame-perfect Nash equilibria is proved for the location game in the circle model with a minimum distance transportation cost function. In addition, sales strategies are proposed for the two players for every local market on the circle when the players are in the equilibrium positions. Finally, an algorithm for simulating the competitive dynamics of the closed-loop market is designed, and two numerical simulations are provided to substantiate the effectiveness of the obtained results.

Description: A novel posture motion-based spatiotemporal fused graph convolutional network (PM-STGCN) is presented for skeleton-based action recognition. Existing methods on skeleton-based action recognition focus on independently calculating the joint information in single frame and motion information of joints between adjacent frames from the human body skeleton structure and then combine the classification results. However, that does not take into consideration of the complicated temporal and spatial relationship of the human body action sequence, so they are not very efficient in distinguishing similar actions. In this work, we enhance the ability of distinguishing similar actions by focusing on spatiotemporal fusion and adaptive feature extraction for high discrimination information. Firstly, the local posture motion-based attention (LPM-TAM) module is proposed for the purpose of suppressing the skeleton sequence data with a low amount of motion in the temporal domain, and the representation of motion posture features is concentrated. Besides, the local posture motion-based channel attention module (LPM-CAM) is introduced to make use of the strongly discriminative representation between different action classes of similarity. Finally, the posture motion-based spatiotemporal fusion (PM-STF) module is constructed which fuses the spatiotemporal skeleton data by filtering out the low-information sequence and enhances the posture motion features adaptively with high discrimination. Extensive experiments have been conducted, and the results demonstrate that the proposed model is superior to the commonly used action recognition methods. The designed human-robot interaction system based on action recognition has competitive performance compared with the speech interaction system.

Description: The article addresses the extended Graetz–Nusselt problem in finite-length microchannels for prescribed wall heat flux boundary conditions, including the effects of rarefaction, streamwise conduction, and viscous dissipation. The analytical solution proposed, valid for low-intermediate Peclet values, takes into account the presence of the thermal development region. The influence of all transport parameters (Peclet Pe, Knudsen Kn, and Brinkman Br) and geometrical parameters (entry length and microchannel aspect ratio) is investigated. Performances of different wall heat flux functions have been analyzed in terms of the averaged Nusselt number. In the absence of viscous dissipation Br=0, the best heating protocol is a decreasing wall heat flux function. In the presence of dissipation Br〉0, the best heating protocol is a uniform wall heat flux.

Description: At present, there are two main standards, ISO 23828 : 2013 and SAE J 2572–2014, which prescribe the hydrogen consumption test using the pressure method, gravimetric method, and flow method. However, these methods do not meet the test requirements for electric energy consumption and the range of plug-in hybrid fuel cell vehicles (FCVs) which are the main technical considerations in China and Europe. In this paper, a new test method for the hydrogen consumption, electric energy consumption, and range of FCVs is proposed without the use of additional hydrogen supply, measurement instruments, or energy consumption correction, which can improve the operability of the test and avoid the conversion between electric energy and hydrogen. One plug-in hybrid FCV and one nonplug-in hybrid FCV were tested using the proposed method. The results show that the new method meets the requirements of fuel economy test for FCVs with hydrogen consumption rate, electric energy consumption rate, the range for plug-in hybrid FCVs, hydrogen consumption rate, and the range for nonplug-in FCVs.

Description: In this paper, a delayed control strategy for a class of nonlinear underactuated fourth-order systems is developed. The proposal is based on the implementation of the tangent linearization technique, differential flatness, and a study of the σ-stabilization of the characteristic equation of the closed-loop system. The tangent linearization technique allows obtaining a local controllability property for the analyzed class of systems. Also, it can reduce the complexity of the global control design, through the use of a cascade connection of two second-order controllers instead of designing a global controller of the fourth-order system. The stabilizing behavior of the delayed controller design is supported by the σ-stability criterion, which provides the controller parameter selection to reach the maximum exponential decay rate on the system response. To illustrate the efficiency of the theoretical results, the proposal is experimentally assessed in two cases of study: a flexible joint system and a pendubot.

Description: Recently, knowledge graph embedding methods have attracted numerous researchers’ interest due to their outstanding effectiveness and robustness in knowledge representation. However, there are still some limitations in the existing methods. On the one hand, translation-based representation models focus on conceiving translation principles to represent knowledge from a global perspective, while they fail to learn various types of relational facts discriminatively. It is prone to make the entity congestion of complex relational facts in the embedding space reducing the precision of representation vectors associating with entities. On the other hand, parallel subgraphs extracted from the original graph are used to learn local relational facts discriminatively. However, it probably causes the relational fact damage of the original knowledge graph to some degree during the subgraph extraction. Thus, previous methods are unable to learn local and global knowledge representation uniformly. To that end, we propose a multiview translation learning model, named MvTransE, which learns relational facts from global-view and local-view perspectives, respectively. Specifically, we first construct multiple parallel subgraphs from an original knowledge graph by considering entity semantic and structural features simultaneously. Then, we embed the original graph and construct subgraphs into the corresponding global and local feature spaces. Finally, we propose a multiview fusion strategy to integrate multiview representations of relational facts. Extensive experiments on four public datasets demonstrate the superiority of our model in knowledge graph representation tasks compared to state-of-the-art methods.

Description: Festivals are experiential products heavily depending on the recommendations of previous visitors. With the power of social media growing, understanding the antecedents of positive electronic word-of-mouth (eWOM) intentions of festival attendees is immensely beneficial for festival organizers to better promote their festivals and control negative publicity. However, there is still limited research regarding eWOM intentions in the festival context. Thus, this study aims to fill such a gap by investigating the relationships among festival attendees’ enjoyment seeking motivation, perceived value, visitor satisfaction, and eWOM intention in a local festival setting. Additionally, the moderating role of gender was tested as it is one of the most important demographic variables to show individual differences in behavioral intentions. The results of structural equation modeling showed a positive effect of enjoyment seeking motivation on perceived value, visitor satisfaction, and eWOM intention. Moreover, gender differences in eWOM intention and a full mediating effect of visitor satisfaction between perceived value and eWOM intention for female respondents were revealed. The findings of this study extend the existing festival literature and provide insights for strategically organizing and promoting festivals to generate more positive eWOM which can be utilized as an effective marketing tool and a feedback channel.

Description: A modified expression of the electron entropy production in a plasma is deduced by means of the Kelly equations of state instead of the ideal gas equations of state. From the Debye–Hückel model which considers the interaction between the charges, such equations of state are derived for a plasma and the entropy is deduced. The technique to obtain the modified entropy production is based on usual developments but including the modified equations of state giving the regular result plus some extra terms. We derive an expression of the modified entropy production in terms of the tensorial Hermitian moments hr1…rm(m) by means of the irreducible tensorial Hermite polynomials.

Description: As acidic deposition has decreased across Eastern North America, forest soils at some sites are beginning to show reversal of soil acidification. However, the degree of recovery appears to vary and is not fully explained by deposition declines alone. To assess if other site and soil factors can help to explain degree of recovery from acid deposition, soil resampling chemistry data (8- to 24-year time interval) from 23 sites in the United States and Canada, located across 25° longitude from Eastern Maine to Western Ontario, were explored. Site and soil factors included recovery years, sulfate (SO42−) deposition history, SO42− reduction rate, C horizon pH and exchangeable calcium (Ca), O and B horizon pH, base saturation, and exchangeable Ca and aluminum (Al) at the time of the initial sampling. We found that O and B horizons that were initially acidified to a greater degree showed greater recovery and B horizon recovery was further associated with an increase in recovery years and lower initial SO42− deposition. Forest soils that seemingly have low buffering capacity and a reduced potential for recovery have the resilience to recover from the effects of previous high levels of acidic deposition. This suggests, that predictions of where forest soils acidification reversal will occur across the landscape should be refined to acknowledge the importance of upper soil profile horizon chemistry rather than the more traditional approach using only parent material characteristics.

Description: The lack of a universal simulation method for triboelectric nanogenerator (TENG) makes the device design and optimization difficult before experiment, which protracts the research and development process and hinders the landing of practical TENG applications. The existing electrostatic induction models for TENGs have limitations in simulating TENGs with complex geometries and their dynamic behaviors under practical movements due to the topology change issues. Here, a dynamic finite element method (FEM) model is proposed. The introduction of air buffer layers and the moving mesh method eliminates the topology change issues during practical movement and allows simulation of dynamic and time-varying behaviors of TENGs with complex 2D/3D geometries. Systematic investigations are carried out to optimize the air buffer thickness and mesh densities, and the optimized results show excellent consistency with the experimental data and results based on other existing methods. It also shows that a 3D disk-type rotating TENG can be simulated using the model, clearly demonstrating the capability and superiority of the dynamic FEM model. Moreover, the dynamic FEM model is used to optimize the shape of the tribo-material, which is used as a preliminary example to demonstrate the possibility of designing a TENG-based sensor.

Description: In this paper, 3D-printed electromagnetic (or microwave) encoders with synchronous reading based on permittivity contrast, and devoted to the measurement of displacements and velocities, are reported for the first time. The considered encoders are based on two chains of linearly shaped apertures made on a 3D-printed high-permittivity dielectric material. One such aperture chain contains the identification (ID) code, whereas the other chain provides the clock signal. Synchronous reading is necessary in order to determine the absolute position if the velocity between the encoder and the sensitive part of the reader is not constant. Such absolute position can be determined as long as the whole encoder is encoded with the so-called de Bruijn sequence. For encoder reading, a splitter/combiner structure with each branch loaded with a series gap and a slot resonator (each one tuned to a different frequency) is considered. Such a structure is able to detect the presence of the apertures when the encoder is displaced, at short distance, over the slots. Thus, by injecting two harmonic signals, conveniently tuned, at the input port of the splitter/combiner structure, two amplitude modulated (AM) signals are generated by tag motion at the output port of the sensitive part of the reader. One of the AM envelope functions provides the absolute position, whereas the other one provides the clock signal and the velocity of the encoder. These synchronous 3D-printed all-dielectric encoders based on permittivity contrast are a good alternative to microwave encoders based on metallic inclusions in those applications where low cost as well as major robustness against mechanical wearing and aging effects are the main concerns.

Description: This paper presents a vulnerable road user (VRU) tracking algorithm capable of handling noisy and missing detections from heterogeneous sensors. We propose a cooperative fusion algorithm for matching and reinforcing of radar and camera detections using their proximity and positional uncertainty. The belief in the existence and position of objects is then maximized by temporal integration of fused detections by a multi-object tracker. By switching between observation models, the tracker adapts to the detection noise characteristics making it robust to individual sensor failures. The main novelty of this paper is an improved imputation sampling function for updating the state when detections are missing. The proposed function uses a likelihood without association that is conditioned on the sensor information instead of the sensor model. The benefits of the proposed solution are two-fold: firstly, particle updates become computationally tractable and secondly, the problem of imputing samples from a state which is predicted without an associated detection is bypassed. Experimental evaluation shows a significant improvement in both detection and tracking performance over multiple control algorithms. In low light situations, the cooperative fusion outperforms intermediate fusion by as much as 30%, while increases in tracking performance are most significant in complex traffic scenes.

Description: Flat surfaces captured by 3D point clouds are often used for localization, mapping, and modeling. Dense point cloud processing has high computation and memory costs making low-dimensional representations of flat surfaces such as polygons desirable. We present Polylidar3D, a non-convex polygon extraction algorithm which takes as input unorganized 3D point clouds (e.g., LiDAR data), organized point clouds (e.g., range images), or user-provided meshes. Non-convex polygons represent flat surfaces in an environment with interior cutouts representing obstacles or holes. The Polylidar3D front-end transforms input data into a half-edge triangular mesh. This representation provides a common level of abstraction for subsequent back-end processing. The Polylidar3D back-end is composed of four core algorithms: mesh smoothing, dominant plane normal estimation, planar segment extraction, and finally polygon extraction. Polylidar3D is shown to be quite fast, making use of CPU multi-threading and GPU acceleration when available. We demonstrate Polylidar3D’s versatility and speed with real-world datasets including aerial LiDAR point clouds for rooftop mapping, autonomous driving LiDAR point clouds for road surface detection, and RGBD cameras for indoor floor/wall detection. We also evaluate Polylidar3D on a challenging planar segmentation benchmark dataset. Results consistently show excellent speed and accuracy.

Description: In this study, we proposed a semi-automated and interactive scheme for organ contouring in radiotherapy planning for patients with non-small cell lung cancers. Several organs were contoured, including the lungs, airway, heart, spinal cord, body, and gross tumor volume (GTV). We proposed some schemes to automatically generate and vanish the seeds of the random walks (RW) algorithm. We considered 25 lung cancer patients, whose computed tomography (CT) images were obtained from the China Medical University Hospital (CMUH) in Taichung, Taiwan. The manual contours made by clinical oncologists were taken as the gold standard for comparison to evaluate the performance of our proposed method. The Dice coefficient between two contours of the same organ was computed to evaluate the similarity. The average Dice coefficients for the lungs, airway, heart, spinal cord, and body and GTV segmentation were 0.92, 0.84, 0.83, 0.73, 0.85 and 0.66, respectively. The computation time was between 2 to 4 min for a whole CT sequence segmentation. The results showed that our method has the potential to assist oncologists in the process of radiotherapy treatment in the CMUH, and hopefully in other hospitals as well, by saving a tremendous amount of time in contouring.

Description: An essential aspect in the interaction between people and computers is the recognition of facial expressions. A key issue in this process is to select relevant features to classify facial expressions accurately. This study examines the selection of optimal geometric features to classify six basic facial expressions: happiness, sadness, surprise, fear, anger, and disgust. Inspired by the Facial Action Coding System (FACS) and the Moving Picture Experts Group 4th standard (MPEG-4), an initial set of 89 features was proposed. These features are normalized distances and angles in 2D and 3D computed from 22 facial landmarks. To select a minimum set of features with the maximum classification accuracy, two selection methods and four classifiers were tested. The first selection method, principal component analysis (PCA), obtained 39 features. The second selection method, a genetic algorithm (GA), obtained 47 features. The experiments ran on the Bosphorus and UIVBFED data sets with 86.62% and 93.92% median accuracy, respectively. Our main finding is that the reduced feature set obtained by the GA is the smallest in comparison with other methods of comparable accuracy. This has implications in reducing the time of recognition.

Description: Automated tracking of physical fitness has sparked a health revolution by allowing individuals to track their own physical activity and health in real time. This concept is beginning to be applied to tracking of cognitive load. It is well known that activity in the brain can be measured through changes in the body’s physiology, but current real-time measures tend to be unimodal and invasive. We therefore propose the concept of a wearable educational fitness (EduFit) tracker. We use machine learning with physiological data to understand how to develop a wearable device that tracks cognitive load accurately in real time. In an initial study, we found that body temperature, skin conductance, and heart rate were able to distinguish between (i) a problem solving activity (high cognitive load), (ii) a leisure activity (moderate cognitive load), and (iii) daydreaming (low cognitive load) with high accuracy in the test dataset. In a second study, we found that these physiological features can be used to predict accurately user-reported mental focus in the test dataset, even when relatively small numbers of training data were used. We explain how these findings inform the development and implementation of a wearable device for temporal tracking and logging a user’s learning activities and cognitive load.

Description: : The main purpose of this work is to study the effectiveness of using FeCeOx nanocomposites doped with Nb2O5 for the purification of aqueous solutions from manganese. X-ray diffraction, energy–dispersive analysis, scanning electron microscopy, vibrational magnetic spectroscopy, and mössbauer spectroscopy were used as research methods. It is shown that an increase in the dopant concentration leads to the transformation of the shape of nanoparticles from spherical to cubic and rhombic, followed by an increase in the size of the nanoparticles. The spherical shape of the nanoparticles is characteristic of a structure consisting of a mixture of two phases of hematite (Fe2O3) and cerium oxide CeO2. The cubic shape of nanoparticles is typical for spinel-type FeNbO4 structures, the phase contribution of which increases with increasing dopant concentration. It is shown that doping leads not only to a decrease in the concentration of manganese in model solutions, but also to an increase in the efficiency of adsorption from 11% to 75%.

Description: A common design concept of the piezoelectric force sensor, which is to assemble a bump structure from a flat or fine columnar piezoelectric structure or to use a specific type of electrode, is quite limited. In this paper, we propose a new design of cylindrical piezoelectric sensors that can detect multidirectional forces. The proposed sensor consists of four row and four column sensors. The design of the sensor was investigated by the finite element method. The response of the sensor to various force directions was observed, and it was demonstrated that the direction of the force applied to the sensor could be derived from the signals of one row sensor and three column sensors. As a result, this sensor proved to be able to detect forces in the area of 225° about the central axis of the sensor. In addition, a cylindrical sensor was fabricated to verify the proposed sensor and a series of experiments were performed. The simulation and experimental results were compared, and the actual sensor response tended to be similar to the simulation.

Description: Access and use of seed of improved varieties of groundnut among farmers can improve farmers’ livelihoods and contribute to the potential of crop production in Tanzania. This paper analyzes factors underpinning the adoption of improved groundnut varieties among farmers to pave the way for upscaling quality seed used for increased production and commodity business in farming communities. A four-stage stratified sampling was used to collect data from 300 groundnut farmers in seven agro-ecological zones through individual interviews. Secondary data were collected from the literature and the Tanzania Agricultural Research Institute at Naliendele centre (TARI–Naliendele). Descriptive statistics and Probit regression model were used for data analysis. The empirical results showed that Johari 1985, Pendo 1998, Naliendele 2009, Mnanje 2009, Mangaka 2009 and Nachi 2015, are the main six improved groundnut varieties used by farmers, with Pendo 1998 having the highest adoption rate (17.1%). In the grain market, four varieties, namely Pendo 1998, Mnanje 2009, Nachi 2015 and Johari 1985, were observed to be highly preferred by grain off-takers. Furthermore, among the adopted improved varieties, Nachi 2015, is observed to be the most consistent high yielding variety, ranging from 1100 kg/ha to 1500 kg/ha in all agro-ecological zones. A farmer’s decision to adopt new varieties is affected by age and gender, farmer group membership, availability of improved seed and seed cost. Overall, male farmers are more likely to adopt improved varieties of groundnut than female farmers. The implications of these findings are also discussed, in particular in the area of policy support.

Description: Subcooled water is the primordial matrix for ice embryo formation by homogeneous and heterogeneous nucleation. The knowledge of the specific Gibbs free energy and other thermodynamic quantities of subcooled water is one of the basic prerequisites of the theoretical analysis of ice crystallization in terms of classical nucleation theory. The most advanced equation of state of subcooled water is the IAPWS G12-15 formulation. The determination of the thermodynamic quantities of subcooled water on the basis of this equation of state requires the iterative determination of the fraction of low-density water in the two-state mixture of low-density and high-density subcooled water from a transcendental equation. For applications such as microscopic nucleation simulation models requiring highly frequent calls of the IAPWS G12-15 calculus, a new two-step predictor-corrector method for the approximative determination of the low-density water fraction has been developed. The new solution method allows a sufficiently accurate determination of the specific Gibbs energy and of all other thermodynamic quantities of subcooled water at given pressure and temperature, such as specific volume and mass density, specific entropy, isothermal compressibility, thermal expansion coefficient, specific isobaric and isochoric heat capacities, and speed of sound. The misfit of this new approximate analytical solution against the exact numerical solution was demonstrated to be smaller than or equal to the misprediction of the original IAPWS G12-15 formulation with respect to experimental values.

Description: Green bonds are similar to conventional bonds but are specifically earmarked to raise money to finance climate or environmental projects. There have been anecdotes of green bonds being priced tighter than similar conventional bonds by the same issuers. Our survey of academic literature indicates that most papers show the yield of a green bond is lower than that of the equivalent conventional bond at issuance (also known as green premium or greenium). However, green bond pricing studies by Climate Bonds Initiative produce mixed results. The conflicting results are likely explained by differences in sample selections, time periods, methodologies, and the properties of the respective issuing entity and the bond. In addition, we examine investment returns from select green bond funds and green bond indexes. The assets under management of those funds are still small and they underperform their benchmark indexes.

Description: Information and communication technologies transform modern education into a more available learning matrix. One of the unexplored aspects of open education is the constant communicative interaction within the student group by using social media. The aim of the study was to determine principal functions of student-led communication in the educational process, the method for assessing its strong points and the disadvantages disrupting traditional learning. For the primary study of the phenomenon, we used methods that made it possible to propose approaches to further analysis. Netnography is the main research method defining the essence and characteristics of the student-led peer-communication. In our research, we applied data visualization, analytical and quantitative methods and developed a set of quantitative indicators that can be used to assess various aspects of student communication in chats. The elaborated visual model can serve as a simple tool for diagnosing group communication processes. We revealed that online group chats perform a support function in learning. They provide constant informational resource on educational and organizational issues and create emotional comfort. Identified features serve to define shortcomings (e.g., lack of students’ readiness to freely exchange answers to assignments) and significant factors (e.g., underutilized opportunities for self-organization) that exist in the modern system of higher education.

Description: Sugarcane is an important industrial crop because it is the major source of white sugar. It is also one of the crops for the alcohol and biofuel industries. Disease-causing organisms can significantly decrease the productivity of sugarcane plants and sugar quality. Among the disease-causing organisms, Colletotrichum falcatum Went causes the most significant economic loss (5–50%) in the sugarcane production due to red rot disease. This loss results in only 31% sugar recovery. It is reported that C. falcatum can kill sugarcane plants. Currently, there is no sustainable way of preventing red rot disease from spreading in sugarcane plantations. Many popular sugarcane varieties are no longer used in sugarcane cultivation because of their susceptibility to C. falcatum. The objectives of this manuscript were to: (i) summarize existing approaches for the early detection of red rot disease and controlling techniques of red rot disease in the field and laboratory and (ii) assess red rot disease control effectiveness so as to propose better methods for mitigating the spread C. falcatum. If our proposition is adopted or practiced, it could significantly contribute to the mitigation of C. falcatum infection in the sugarcane industry. This could enable achieving sustainable cultivation of sugarcanes to guarantee the sustainability of the sugar industry in the tropics and the subtropics.

Description: The transition from intensive conventional agriculture to sustainable agriculture has become a global priority. This is due to the need for environmentally friendly agriculture to ensure sufficient food for a rapidly growing population. The bioeconomy is essential to progress in the field of sustainable agriculture. It contributes to the conservation of biological resources through circular and comprehensive management. The bioeconomy prioritizes the reduction and reuse of materials and products. The focus of this study is the use of biodegradable/compostable raffia in protected horticultural crops in the Province of Almería (Spain). The analysis and evaluations, based on an extensive literature review and information given by stakeholders, determined that biodegradable raffia use significantly improves the management of residual biomass in Almería. However, biodegradable raffia is only used in a small percentage of crops even though it is a sustainable alternative and profitable for farmers. The economic analysis incorporates the higher cost of recycling non-biodegradable raffia.

Description: Sustainable agricultural production is endangered by several ecological factors, such as drought, extreme temperatures, excessive salts, parasitic ailments, and insect pest infestation. These challenging environmental factors may have adverse effects on future agriculture production in many countries. In modern agriculture, conventional crop-breeding techniques alone are inadequate for achieving the increasing population’s food demand on a sustainable basis. The advancement of molecular genetics and related technologies are promising tools for the selection of new crop species. Gene pyramiding through marker-assisted selection (MAS) and other techniques have accelerated the development of durable resistant/tolerant lines with high accuracy in the shortest period of time for agricultural sustainability. Gene stacking has not been fully utilized for biotic stress resistance development and quality improvement in most of the major cultivated crops. This review emphasizes on gene pyramiding techniques that are being successfully deployed in modern agriculture for improving crop tolerance to biotic and abiotic stresses for sustainable crop improvement.

Description: Many human activities are tactile. Recognizing how a person touches an object or a surface surrounding them is an active area of research and it has generated keen interest within the interactive surface community. In this paper, we compare two machine learning techniques, namely Artificial Neural Network (ANN) and Hidden Markov Models (HMM), as they are some of the most common techniques with low computational cost used to classify an acoustic-based input. We employ a small and low-cost hardware design composed of a microphone, a stethoscope, a conditioning circuit, and a microcontroller. Together with an appropriate surface, we integrated these components into a passive gesture recognition input system for experimental evaluation. To perform the evaluation, we acquire the signals using a small microphone and send it through the microcontroller to MATLAB’s toolboxes to implement and evaluate the ANN and HMM models. We also present the hardware and software implementation and discuss the advantages and limitations of these techniques in gesture recognition while using a simple alphabet of three geometrical figures: circle, square, and triangle. The results validate the robustness of the HMM technique that achieved a success rate of 90%, with a shorter training time than the ANN.

Description: In recent years, field-effect transistors (FETs) have been very promising for biosensor applications due to their high sensitivity, real-time applicability, scalability, and prospect of integrating measurement system on a chip. Non-carbon 2D materials, such as transition metal dichalcogenides (TMDCs), hexagonal boron nitride (h-BN), black phosphorus (BP), and metal oxides, are a group of new materials that have a huge potential in FET biosensor applications. In this work, we review the recent advances and remarkable studies of non-carbon 2D materials, in terms of their structures, preparations, properties and FET biosensor applications. We will also discuss the challenges facing non-carbon 2D materials-FET biosensors and their future perspectives.

Description: Siamese network-based trackers consider tracking as features cross-correlation between the target template and the search region. Therefore, feature representation plays an important role for constructing a high-performance tracker. However, all existing Siamese networks extract the deep but low-resolution features of the entire patch, which is not robust enough to estimate the target bounding box accurately. In this work, to address this issue, we propose a novel high-resolution Siamese network, which connects the high-to-low resolution convolution streams in parallel as well as repeatedly exchanges the information across resolutions to maintain high-resolution representations. The resulting representation is semantically richer and spatially more precise by a simple yet effective multi-scale feature fusion strategy. Moreover, we exploit attention mechanisms to learn object-aware masks for adaptive feature refinement, and use deformable convolution to handle complex geometric transformations. This makes the target more discriminative against distractors and background. Without bells and whistles, extensive experiments on popular tracking benchmarks containing OTB100, UAV123, VOT2018 and LaSOT demonstrate that the proposed tracker achieves state-of-the-art performance and runs in real time, confirming its efficiency and effectiveness.

Description: The Internet of Medical Things (IoMT) couples IoT technologies with healthcare services in order to support real-time, remote patient monitoring and treatment. However, the interconnectivity of critical medical devices with other systems in various network layers creates new opportunities for remote adversaries. Since most of the communication protocols have not been specifically designed for the needs of connected medical devices, there is a need to classify the available IoT communication technologies in terms of security. In this paper we classify IoT communication protocols, with respect to their application in IoMT. Then we describe the main characteristics of IoT communication protocols used at the perception, network and application layer of medical devices. We examine the inherent security characteristics and limitations of IoMT-specific communication protocols. Based on realistic attacks we identify available mitigation controls that may be applied to secure IoMT communications, as well as existing research and implementation gaps.

Description: Monitoring biomass of forages in experimental plots and livestock farms is a time-consuming, expensive, and biased task. Thus, non-destructive, accurate, precise, and quick phenotyping strategies for biomass yield are needed. To promote high-throughput phenotyping in forages, we propose and evaluate the use of deep learning-based methods and UAV (Unmanned Aerial Vehicle)-based RGB images to estimate the value of biomass yield by different genotypes of the forage grass species Panicum maximum Jacq. Experiments were conducted in the Brazilian Cerrado with 110 genotypes with three replications, totaling 330 plots. Two regression models based on Convolutional Neural Networks (CNNs) named AlexNet and ResNet18 were evaluated, and compared to VGGNet—adopted in previous work in the same thematic for other grass species. The predictions returned by the models reached a correlation of 0.88 and a mean absolute error of 12.98% using AlexNet considering pre-training and data augmentation. This proposal may contribute to forage biomass estimation in breeding populations and livestock areas, as well as to reduce the labor in the field.

Description: Bioelectrocatalysis provides the intrinsic catalytic functions of redox enzymes to nonspecific electrode reactions and is the most important and basic concept for electrochemical biosensors. This review starts by describing fundamental characteristics of bioelectrocatalytic reactions in mediated and direct electron transfer types from a theoretical viewpoint and summarizes amperometric biosensors based on multi-enzymatic cascades and for multianalyte detection. The review also introduces prospective aspects of two new concepts of biosensors: mass-transfer-controlled (pseudo)steady-state amperometry at microelectrodes with enhanced enzymatic activity without calibration curves and potentiometric coulometry at enzyme/mediator-immobilized biosensors for absolute determination.

Description: Physical rehabilitation therapies for children present a challenge, and its success—the improvement of the patient’s condition—depends on many factors, such as the patient’s attitude and motivation, the correct execution of the exercises prescribed by the specialist or his progressive recovery during the therapy. With the aim to increase the benefits of these therapies, social humanoid robots with a friendly aspect represent a promising tool not only to boost the interaction with the pediatric patient, but also to assist physicians in their work. To achieve both goals, it is essential to monitor in detail the patient’s condition, trying to generate user profile models which enhance the feedback with both the system and the specialist. This paper describes how the project NAOTherapist—a robotic architecture for rehabilitation with social robots—has been upgraded in order to include a monitoring system able to generate user profile models through the interaction with the patient, performing user-adapted therapies. Furthermore, the system has been improved by integrating a machine learning algorithm which recognizes the pose adopted by the patient and by adding a clinical reports generation system based on the QUEST metric.

Description: Despite many studies reporting hemispheric asymmetry in the representation and processing of emotions, the essence of the asymmetry remains controversial. Brain network analysis based on electroencephalography (EEG) is a useful biological method to study brain function. Here, EEG data were recorded while participants watched different emotional videos. According to the videos’ emotional categories, the data were divided into four categories: high arousal high valence (HAHV), low arousal high valence (LAHV), low arousal low valence (LALV) and high arousal low valence (HALV). The phase lag index as a connectivity index was calculated in theta (4–7 Hz), alpha (8–13 Hz), beta (14–30 Hz) and gamma (31–45 Hz) bands. Hemispheric networks were constructed for each trial, and graph theory was applied to quantify the hemispheric networks’ topological properties. Statistical analyses showed significant topological differences in the gamma band. The left hemispheric network showed significantly higher clustering coefficient (Cp), global efficiency (Eg) and local efficiency (Eloc) and lower characteristic path length (Lp) under HAHV emotion. The right hemispheric network showed significantly higher Cp and Eloc and lower Lp under HALV emotion. The results showed that the left hemisphere was dominant for HAHV emotion, while the right hemisphere was dominant for HALV emotion. The research revealed the relationship between emotion and hemispheric asymmetry from the perspective of brain networks.

Description: The Karlsruhe Tritium Neutrino (KATRIN) experiment aims at measuring the effective electron neutrino mass with a sensitivity of 0.2 eV/c2, i.e., improving on previous measurements by an order of magnitude. Neutrino mass data taking with KATRIN commenced in early 2019, and after only a few weeks of data recording, analysis of these data showed the success of KATRIN, improving on the known neutrino mass limit by a factor of about two. This success very much could be ascribed to the fact that most of the system components met, or even surpassed, the required specifications during long-term operation. Here, we report on the performance of the laser Raman (LARA) monitoring system which provides continuous high-precision information on the gas composition injected into the experiment’s windowless gaseous tritium source (WGTS), specifically on its isotopic purity of tritium—one of the key parameters required in the derivation of the electron neutrino mass. The concentrations cx for all six hydrogen isotopologues were monitored simultaneously, with a measurement precision for individual components of the order 10−3 or better throughout the complete KATRIN data taking campaigns to date. From these, the tritium purity, εT, is derived with precision of

Description: In this paper, we present a navigation strategy exclusively designed for social robots with limited sensors for applications in homes. The overall system integrates a reactive design based on subsumption architecture and a knowledge system with learning capabilities. The component of the system includes several modules, such as doorway detection and room localization via convolutional neural network (CNN), avoiding obstacles via reinforcement learning, passing the doorway via Canny edge’s detection, building an abstract map called a Directional Semantic Topological Map (DST-Map) within the knowledge system, and other predefined layers within the subsumption architecture. The individual modules and the overall system are evaluated in a virtual environment using Webots simulator.

Description: In multi-target tracking scenarios with dense and heterogeneous clutter, there is a substantial increase in the false measurements that originated from the clutter within the validation gate, and consequently, the number of measurement-to-track association hypothesis grows rapidly in traditional multiple hypothesis tracker (MHT), leading to a sharp decrease in data association accuracy and tracking performance. A new multiple hypothesis tracker using validation gate with motion direction constraint (MHT-MDC) is proposed to solve these problems. In the MHT-MDC, a motion direction constraint (MDC) gate is designed by considering the prior target maneuvering information, which effectively reduces the volume of validation gate and, thus, diminishes the number of false measurements in the gate when the innovation covariance is large. Subsequently, the clutter density in the MDC gate is adaptively estimated by the conditional mean estimator of clutter density (CMECD), based on which the score functions in the MDC gate can be calculated. The MHT-MDC is compared with the MHT algorithm in simulations, and the experimental results demonstrate its superior tracking performance for weakly maneuvering targets in high clutter density scenarios.

Description: Over the last decade, video surveillance systems have become a part of the Internet of Things (IoT). These IP-based surveillance systems now protect industrial facilities, railways, gas stations, and even one’s own home. Unfortunately, like other IoT systems, there are inherent security risks which can lead to significant violations of a user’s privacy. In this review, we explore the attack surface of modern surveillance systems and enumerate the various ways they can be compromised with real examples. We also identify the threat agents, their attack goals, attack vectors, and the resulting consequences of successful attacks. Finally, we present current countermeasures and best practices and discuss the threat horizon. The purpose of this review is to provide researchers and engineers with a better understanding of a modern surveillance systems’ security, to harden existing systems and develop improved security solutions.

Description: The work investigates the application of artificial neural networks and logistic regression for the recognition of activities performed by room occupants. KNX (Konnex) standard-based devices were selected for smart home automation and data collection. The obtained data from these devices (Humidity, CO2, temperature) were used in combination with two wearable gadgets to classify specific activities performed by the room occupant. The obtained classifications can benefit the occupant by monitoring the wellbeing of elderly residents and providing optimal air quality and temperature by utilizing heating, ventilation, and air conditioning control. The obtained results yield accurate classification.

Description: A multimode resource-constrained project scheduling problem (MRCPSP) may have multifeasible solutions, due to its nature of targeting multiobjectives. Given the NP-hard MRCPSP and intricate multiobjective algorithms, finding the optimized result among those solutions seems impossible. This paper adopts data envelopment analysis (DEA) to evaluate a series of solutions of an MRCPSP and to find an appropriate choice in an objective way. Our approach is applied to a typical MRCPSP in practice, and the results validate that DEA is an effective and objective method for MRCPSP solution selection.

Description: Okanin is a major flavonoid found in Coreopsis tinctoria Nutt., arousing huge interest recently for its considerable biological characteristics including antioxidant, antineurotoxic, and antidiabetic activities. An ultrahigh performance liquid chromatography triple-quadrupole tandem mass spectrometry (UPLC-MS) was successfully used to determine okanin in rat plasma after oral administration of okanin. Bavachalcone acted as an internal standard (IS). By gradient elution, IS and analyte were separated on a C18 column for 7 min at a flow rate of 0.25 mL/min with acetonitrile-0.1% acetic acid mobile phase. The stability, matrix effect, extraction recovery, accuracy, precision, linearity, and selectivity of the method were firstly demonstrated. The major pharmacokinetic parameters of okanin in rat plasma were then measured using the developed UPLC-MS method. An UPLC-quadrupole time-of-flight mass spectrometry (UPLC-Q-TOF-MS) was finally established to obtain the specific and accurate mass of okanin in rat plasma after oral administration, and its proposed fragmentation was further elaborated.

Description: The unstoppable quest for low-cost reinforcing agent gingered the enthusiasm towards developing and utilising the agro-based waste product as reinforcement since they are promptly accessible, sustainable, and inexpensive to purchase. In this study, AA6061/rice husk ash matrix composites were produced through metallurgical stir casting techniques. Different weight percentages of reinforcement in the range of 2%, 4%, 6%, and 8% were used to fabricate the composites. The reinforced composites were characterized by SEM/EDS for microstructural study. The mechanical behaviour was examined for all the produced samples. SEM/EDS analysis revealed the presence of silica, a major constituent of rice husk ash in the produced composites. The results of the mechanical behaviour show that upgrading the weight percentage of reinforcing agent increases the mechanical properties. AA6061/8% rice hush ash generated a consistent rise with filler concentration in comparison with the aluminium alloy in all operating functions.

Description: Based on the oligopoly game theory and the intellectual property rights protection policy, we investigate the complex dynamical behaviors of a mixed duopoly game with quadratic cost. In the new system, a few parameters are improved by considering intellectual property rights protection and the stability conditions of the Nash equilibrium point are discussed in detail. A set of the two-dimensional bifurcation diagrams is demonstrated by using numerical modeling, and these diagrams show abundant complex dynamical behaviors, such as coexistence of attractors, different bifurcation, and fractal structures. These dynamical properties can present the long-run effects of strengthening intellectual property protection.

Description: Implementing artificial neural networks is commonly achieved via high-level programming languages such as Python and easy-to-use deep learning libraries such as Keras. These software libraries come preloaded with a variety of network architectures, provide autodifferentiation, and support GPUs for fast and efficient computation. As a result, a deep learning practitioner will favor training a neural network model in Python, where these tools are readily available. However, many large-scale scientific computation projects are written in Fortran, making it difficult to integrate with modern deep learning methods. To alleviate this problem, we introduce a software library, the Fortran-Keras Bridge (FKB). This two-way bridge connects environments where deep learning resources are plentiful with those where they are scarce. The paper describes several unique features offered by FKB, such as customizable layers, loss functions, and network ensembles. The paper concludes with a case study that applies FKB to address open questions about the robustness of an experimental approach to global climate simulation, in which subgrid physics are outsourced to deep neural network emulators. In this context, FKB enables a hyperparameter search of one hundred plus candidate models of subgrid cloud and radiation physics, initially implemented in Keras, to be transferred and used in Fortran. Such a process allows the model’s emergent behavior to be assessed, i.e., when fit imperfections are coupled to explicit planetary-scale fluid dynamics. The results reveal a previously unrecognized strong relationship between offline validation error and online performance, in which the choice of the optimizer proves unexpectedly critical. This in turn reveals many new neural network architectures that produce considerable improvements in climate model stability including some with reduced error, for an especially challenging training dataset.

Description: Social networks are a complex system that members communicate, create new connections or destroy existing connections, and further deliver major impacts on each member’s life. Given the spread of the Internet and increased academic pressure, sedentary and prescreen behaviors are very common among adolescents; meanwhile, sports behaviors are gradually decreasing. This situation has had an adverse effect on health. This paper used a questionnaire survey to investigate the influence of social networks on adolescent sports behavior, including the intermediary role of social efficacy and moderating effect of self-presentation. The questionnaire survey was conducted on 568 students from 6 high schools in Shaanxi, Henan, and Shandong Provinces. After this, factor analysis and weighted least squares method were used for the empirical test. Based on theoretical and empirical analysis, this paper found the following: (1) Social networks of adolescents have obvious positive predictive effects on their sports behavior. A single online social network and an offline social network, instrumental network, emotional network, and mixed network have obvious positive predictive effects on adolescent sports behaviors. However, under the influence of multiple types of social networks, an offline social network has a negative predictive effect, while a mixed network has effects that are not as obvious. (2) Social efficacy plays an intermediary role in the relationship between social network and adolescent sports behavior. (3) The moderating effect of self-presentation is not significant.

Description: The aim of the study was to evaluate the changes in glomalin-related soil proteins (GRSP) content, microbial diversity and soil physical quality depending on the type of soil measures of soil improvement and changes in soil health. The study was based on a 100-year stationary field microplot experiment where the soil profiles were collected with preserving the natural soil horizons. The microplot experiment was carried out on eight different soil types: Brunic Arenosol (Dystric I), Rendzic Leptosol, Fluvic Cambisol, Haplic Cambisol (Eutric), Gleyic Phaeozem, Brunic Arenosol (Dystric II), Haplic Cambisol (Eutric II) and Haplic Cambisol (Dystric). These soils are the most common types of agricultural soils in Poland. Relatively significant correlations with the soil quality, physical parameters and the glomalin-related soil proteins have been found. The study determined the total GRSP (T-GRSP) and easily extractable GRSP (EE-GRSP) levels in soils as well as the soil physical quality index and soil’s microbial biodiversity. The GRSP depended on the type of soil and correlated with S-Index and also was responsible for the unique chemical and physical properties of soils. Soils characterized by the highest T-GRSP content belonged to the group of very good and good soil physical quality characterized also by high biological activity, for which there were strong correlations with such parameters as dehydrogenase activity (DHA), microbial biomass content (MBC), microbial nitrogen content (MBN) and total bacteria number (B). The highest T-GRSP content and higher microbial diversity were found in Gleyic Phaeozem, Rendzic Leptosol and Fluvic Cambisol. The T-GRSP and EE-GRSP content were additionally correlated with the number of AMF spores. Very poor and poor soil physical quality according to S-Index characterized Brunic Arenosol (Dystric I) and Haplic Cambisol (Dystric). This research indicates that a specific edaphone of soil microorganisms and GRSP content may be of great importance when assessing a soil’s quality and improvements in soil health. The abundance of glomalin-producing fungi significantly affects the quality of the soil. This effect is particularly important for agricultural soils are threatened by ongoing land degradation.

Description: In recent years, there has been increasing interest in the development of micron-scale devices utilizing thermal gradients to manipulate molecules and colloids, and to measure their thermophoretic properties quantitatively. Various devices have been realized, such as on-chip implements, micro-thermogravitational columns and other micron-scale thermophoretic cells. The advantage of the miniaturized devices lies in the reduced sample volume. Often, a direct observation of particles using various microscopic techniques is possible. On the other hand, the small dimensions lead to some technical problems, such as a precise temperature measurement on small length scale with high spatial resolution. In this review, we will focus on the “state of the art” thermophoretic micron-scale devices, covering various aspects such as generating temperature gradients, temperature measurement, and the analysis of the current micron-scale devices. We want to give researchers an orientation for their development of thermophoretic micron-scale devices for biological, chemical, analytical, and medical applications.

Description: In order to maximize energy efficiency in heterogeneous networks (HetNets), a turbo Q-Learning (TQL) combined with multistage decision process and tabular Q-Learning is proposed to optimize the resource configuration. For the large dimensions of action space, the problem of energy efficiency optimization is designed as a multistage decision process in this paper, according to the resource allocation of optimization objectives, the initial problem is divided into several subproblems which are solved by tabular Q-Learning, and the traditional exponential increasing size of action space is decomposed into linear increase. By iterating the solutions of subproblems, the initial problem is solved. The simple stability analysis of the algorithm is given in this paper. As to the large dimension of state space, we use a deep neural network (DNN) to classify states where the optimization policy of novel Q-Learning is set to label samples. Thus far, the dimensions of action and state space have been solved. The simulation results show that our approach is convergent, improves the convergence speed by 60% while maintaining almost the same energy efficiency and having the characteristics of system adjustment.

Description: The intrinsic heterogeneity property of concrete causes strong multiple scatterings during wave propagation, forming coda wave that follows very complex trajectories. As a superposition of multiply scattered waves, coda wave shows great sensitivity to subtle changes, but meanwhile lose spatial resolution. To make use of its sensitivity and turn the limitation into advantage, this paper presents an experimental study of three-dimensionally imaging local changes in concrete by application of inverse algorithms to coda wave measurements. Load tests are performed on a large reinforced concrete beam that contains multiple pre-existing millimeter-scale cracks in order to match real life situation. The joint effects of cracks and stresses on coda waves have been monitored using a network of fixed transducers placed at the surface. The global waveform decorrelations and velocity variations are firstly quantified through coda wave interferometry technique. Subsequently, two inverse algorithms are independently applied to map the densities of changes at each localized position. Using this methodology, the stress changes and subtle cracks in the concrete beam are detected and imaged for both temporal and spatial domains.

Description: The heat-exchanger/reactor (HEX reactor) is a kind of plug-flow chemical reactor which combines high heat transfer ability with good chemical performances. It was designed under the popular trend of process intensification in chemical engineering. Previous studies have investigated its characteristics and developed its nominal model. This paper is concerned with its fault tolerant control (FTC) applications. To avoid the difficulties and nonlinearities of this HEX reactor under chemical reactions, a two-layer, multiple-model structure is proposed for designing the FTC scheme. The first layer focuses on representing the nonlinear system with a bank of local linear models while the second layer uses model banks for approaching faulty situations. Model banks are achieved by system identification, and the corresponding controller banks are designed using model predictive control (MPC). The unscented Kalman filter (UKF) is introduced to estimate the states and form the fault detection and isolation (FDI) section. Finally, the FTC simulation and validation results are presented. The idea of a two-layer, multiple-model structure presents a general framework for FTC design of complex and highly nonlinear systems, such as the HEX reactor, whose mathematical model has been created. It implements the design process in an unusual way and is also worth trying on other cases.

Description: Leaf rust (LR) and stem rust (SR) pose serious challenges to wheat production in Kazakhstan. In recent years, the susceptibility of local wheat cultivars has substantially decreased grain yield and quality. Therefore, local breeding projects must be adjusted toward the improvement of LR and SR disease resistances, including genetic approaches. In this study, a spring wheat segregating population of Pamyati Azieva (PA) × Paragon (Par), consisting of 98 recombinant inbred lines (RILs), was analyzed for the resistance to LR and SR at the seedling and adult plant-growth stages. In total, 24 quantitative trait loci (QTLs) for resistance to rust diseases at the seedling and adult plant stages were identified, including 11 QTLs for LR and 13 QTLs for SR resistances. Fourteen QTLs were in similar locations to QTLs and major genes detected in previous linkage mapping and genome-wide association studies. The remaining 10 QTLs are potentially new genetic factors for LR and SR resistance in wheat. Overall, the QTLs revealed in this study may play an important role in the improvement of wheat resistance to LR and SR per the marker-assisted selection approach.

Description: The range of applications of electromyography-based gesture recognition has increased over the last years. A common problem regularly encountered in literature is the inadequate data availability. Data augmentation, which aims at generating new synthetic data from the existing ones, is the most common approach to deal with this data shortage in other research domains. In the case of surface electromyography (sEMG) signals, there is limited research in augmentation methods and quite regularly the results differ between available studies. In this work, we provide a detailed evaluation of existing (i.e., additive noise, overlapping windows) and novel (i.e., magnitude warping, wavelet decomposition, synthetic sEMG models) strategies of data augmentation for electromyography signals. A set of metrics (i.e., classification accuracy, silhouette score, and Davies–Bouldin index) and visualizations help with the assessment and provides insights about their performance. Methods like signal magnitude warping and wavelet decomposition yield considerable increase (up to 16%) in classification accuracy across two benchmark datasets. Particularly, a significant improvement of 1% in the classification accuracy of the state-of-the-art model in hand gesture recognition is achieved.

Description: Emotion recognition has been gaining attention in recent years due to its applications on artificial agents. To achieve a good performance with this task, much research has been conducted on the multi-modality emotion recognition model for leveraging the different strengths of each modality. However, a research question remains: what exactly is the most appropriate way to fuse the information from different modalities? In this paper, we proposed audio sample augmentation and an emotion-oriented encoder-decoder to improve the performance of emotion recognition and discussed an inter-modality, decision-level fusion method based on a graph attention network (GAT). Compared to the baseline, our model improved the weighted average F1-scores from 64.18 to 68.31% and the weighted average accuracy from 65.25 to 69.88%.

Description: Height measurement for moving pedestrians is quite significant in many scenarios, such as pedestrian positioning, criminal suspect tracking, and virtual reality. Although some existing height measurement methods can detect the height of the static people, it is hard to measure height accurately for moving pedestrians. Considering the height fluctuations in dynamic situation, this paper proposes a real-time height measurement based on the Time-of-Flight (TOF) camera. Depth images in a continuous sequence are addressed to obtain the real-time height of the pedestrian with moving. Firstly, a normalization equation is presented to convert the depth image into the grey image for a lower time cost and better performance. Secondly, a difference-particle swarm optimization (D-PSO) algorithm is proposed to remove the complex background and reduce the noises. Thirdly, a segmentation algorithm based on the maximally stable extremal regions (MSERs) is introduced to extract the pedestrian head region. Then, a novel multilayer iterative average algorithm (MLIA) is developed for obtaining the height of dynamic pedestrians. Finally, Kalman filtering is used to improve the measurement accuracy by combining the current measurement and the height at the last moment. In addition, the VICON system is adopted as the ground truth to verify the proposed method, and the result shows that our method can accurately measure the real-time height of moving pedestrians.

Description: Since China’s first stock index futures, China Securities Index 300 (CSI300) stock index futures were published in 2010, and China’s stock index futures market is now in a period of rapid development and play a key role in price discovery. During 2014 to 2015, China’s stock index futures market fluctuated abnormally, and the overuse of high-frequency trading (HFT) strategies in the stock index futures market was blamed as the main reason of the abnormal volatility. To lower down market fluctuation, the regulatory institute then announced a series of trade restriction policy to prevent the overuse of HFT behaviour. However, until now, the impact of such trade restriction policy for HFT remains uncertain. To tackle this issue, based on minute-level HFT data from the CSI 300 index futures market, this paper aims to investigate the relationship between HFT and the exogenous liquidity risk and how HFT affects China’s stock index futures market on its liquidity using the liquidity-adjusted value at risk (LVaR) model. The findings indicate that HFT improves the return of the liquidity provider and reduces the exogenous liquidity risk significantly.

Description: Based on the conceptual basis of information theory, we propose a novel mutual information measure—‘path-based mutual information’. This information measure results from the representation of a set of random variables as a probabilistic graphical model. The edges in this graph are modeled as discrete memoryless communication channels, that is, the underlying data is ergodic, stationary, and the Markov condition is assumed to be applicable. The associated multilinear stochastic maps, tensors, transform source probability mass functions into destination probability mass functions. This allows for an exact expression of the resulting tensor of a cascade of discrete memoryless communication channels in terms of the tensors of the constituting communication channels in the paths. The resulting path-based information measure gives rise to intuitive, non-negative, and additive path-based information components—redundant, unique, and synergistic information—as proposed by Williams and Beer. The path-based redundancy satisfies the axioms postulated by Williams and Beer, the identity axiom postulated by Harder, and the left monotonicity axiom postulated Bertschinger. The ordering relations between redundancies of different joint collections of sources, as captured in the redundancy lattices of Williams and Beer, follow from the data processing inequality. Although negative information components can arise, we speculate that these either result from unobserved variables, or from adding additional sources that are statistically independent from all other sources to a system containing only non-negative information components. This path-based approach illustrates that information theory provides the concepts and measures for a partial information decomposition.

Description: In recent years, a series of matching pursuit and hard thresholding algorithms have been proposed to solve the sparse representation problem with ℓ0-norm constraint. In addition, some stochastic hard thresholding methods were also proposed, such as stochastic gradient hard thresholding (SG-HT) and stochastic variance reduced gradient hard thresholding (SVRGHT). However, each iteration of all the algorithms requires one hard thresholding operation, which leads to a high per-iteration complexity and slow convergence, especially for high-dimensional problems. To address this issue, we propose a new stochastic recursive gradient support pursuit (SRGSP) algorithm, in which only one hard thresholding operation is required in each outer-iteration. Thus, SRGSP has a significantly lower computational complexity than existing methods such as SG-HT and SVRGHT. Moreover, we also provide the convergence analysis of SRGSP, which shows that SRGSP attains a linear convergence rate. Our experimental results on large-scale synthetic and real-world datasets verify that SRGSP outperforms state-of-the-art related methods for tackling various sparse representation problems. Moreover, we conduct many experiments on two real-world sparse representation applications such as image denoising and face recognition, and all the results also validate that our SRGSP algorithm obtains much better performance than other sparse representation learning optimization methods in terms of PSNR and recognition rates.

Description: In this paper, we propose an adaptive entropy model (AEM), which incorporates the entropy measurement and the adaptability into the conventional Markowitz’s mean-variance model (MVM). We evaluate the performance of AEM, based on several portfolio performance indicators using the five-year Shanghai Stock Exchange 50 (SSE50) index constituent stocks data set. Our outcomes show, compared with the traditional portfolio selection model, that AEM tends to make our investments more decentralized and hence helps to neutralize unsystematic risks. Due to the existence of self-adaptation, AEM turns out to be more adaptable to market fluctuations and helps to maintain the balance between the decentralized and concentrated investments in order to meet investors’ expectations. Our model applies equally well to portfolio optimizations for other financial markets.

Description: Due to the growing success of neural machine translation (NMT), many have started to question its applicability within the field of literary translation. In order to grasp the possibilities of NMT, we studied the output of the neural machine system of Google Translate (GNMT) and DeepL when applied to four classic novels translated from English into Dutch. The quality of the NMT systems is discussed by focusing on manual annotations, and we also employed various metrics in order to get an insight into lexical richness, local cohesion, syntactic, and stylistic difference. Firstly, we discovered that a large proportion of the translated sentences contained errors. We also observed a lower level of lexical richness and local cohesion in the NMTs compared to the human translations. In addition, NMTs are more likely to follow the syntactic structure of a source sentence, whereas human translations can differ. Lastly, the human translations deviate from the machine translations in style.

Description: The emergence and outbreak of the novel coronavirus (COVID-19) had a devasting effect on global health, the economy, and individuals’ daily lives. Timely diagnosis of COVID-19 is a crucial task, as it reduces the risk of pandemic spread, and early treatment will save patients’ life. Due to the time-consuming, complex nature, and high false-negative rate of the gold-standard RT-PCR test used for the diagnosis of COVID-19, the need for an additional diagnosis method has increased. Studies have proved the significance of X-ray images for the diagnosis of COVID-19. The dissemination of deep-learning techniques on X-ray images can automate the diagnosis process and serve as an assistive tool for radiologists. In this study, we used four deep-learning models—DenseNet121, ResNet50, VGG16, and VGG19—using the transfer-learning concept for the diagnosis of X-ray images as COVID-19 or normal. In the proposed study, VGG16 and VGG19 outperformed the other two deep-learning models. The study achieved an overall classification accuracy of 99.3%.

Description: Quantum turbulence deals with the phenomenon of turbulence in quantum fluids, such as superfluid helium and trapped Bose-Einstein condensates (BECs). Although much progress has been made in understanding quantum turbulence, several fundamental questions remain to be answered. In this work, we investigated the entropy of a trapped BEC in several regimes, including equilibrium, small excitations, the onset of turbulence, and a turbulent state. We considered the time evolution when the system is perturbed and let to evolve after the external excitation is turned off. We derived an expression for the entropy consistent with the accessible experimental data, which is, using the assumption that the momentum distribution is well-known. We related the excitation amplitude to different stages of the perturbed system, and we found distinct features of the entropy in each of them. In particular, we observed a sudden increase in the entropy following the establishment of a particle cascade. We argue that entropy and related quantities can be used to investigate and characterize quantum turbulence.

Description: At present, the state-of-the-art approaches of Visual Question Answering (VQA) mainly use the co-attention model to relate each visual object with text objects, which can achieve the coarse interactions between multimodalities. However, they ignore the dense self-attention within question modality. In order to solve this problem and improve the accuracy of VQA tasks, in the present paper, an effective Dense Co-Attention Networks (DCAN) is proposed. First, to better capture the relationship between words that are relatively far apart and make the extracted semantics more robust, the Bidirectional Long Short-Term Memory (Bi-LSTM) neural network is introduced to encode questions and answers; second, to realize the fine-grained interactions between the question words and image regions, a dense multimodal co-attention model is proposed. The model’s basic components include the self-attention unit and the guided-attention unit, which are cascaded in depth to form a hierarchical structure. The experimental results on the VQA-v2 dataset show that DCAN has obvious performance advantages, which makes VQA applicable to a wider range of AI scenarios.

Description: Present-day science indicates that developing sensors with excellent sensitivity and selectivity for detecting early signs of diseases is highly desirable. Electrochemical sensors offer a method for detecting diseases that are simpler, faster, and more accurate than conventional laboratory analysis methods. Primarily, exploiting non-noble-metal nanomaterials with excellent conductivity and large surface area is still an area of active research due to its highly sensitive and selective catalysts for electrochemical detection in enzyme-free sensors. In this research, we successfully fabricate Metal-Organic Framework (MOF) FeBDC-derived Fe3O4 for non-enzymatic electrochemical detection of glucose. FeBDC synthesis was carried out using the solvothermal method. FeCl2.4H2O and Benzene-1,4-dicarboxylic acid (H2BDC) are used as precursors to form FeBDC. The materials were further characterized utilizing X-ray Powder Diffraction (XRD), Scanning Electron Microscopy (SEM), and Fourier-Transform Infrared Spectroscopy (FTIR). The resulting MOF yields good crystallinity and micro-rod like morphology. Electrochemical properties were tested using Cyclic Voltammetry (CV) and Differential Pulse Voltammetry (DPV) with a 0.1 M of Phosphate Buffer Saline (PBS pH 7.4) solution as the supporting electrolyte. The measurement results show the reduction and oxidation peaks in the CV curve of FeBDC, as well as Fe3O4. Pyrolysis of FeBDC to Fe3O4 increases the peak of oxidation and reduction currents. The Fe3O4 sample obtained has a sensitivity of 4.67 µA mM−1.cm−2, a linear range between 0.0 to 9.0 mM, and a glucose detection limit of 15.70 µM.

Description: In this work, we present a network architecture with parallel convolutional neural networks (CNN) for removing perspective distortion in images. While other works generate corrected images through the use of generative adversarial networks or encoder-decoder networks, we propose a method wherein three CNNs are trained in parallel, to predict a certain element pair in the 3×3 transformation matrix, M^. The corrected image is produced by transforming the distorted input image using M^−1. The networks are trained from our generated distorted image dataset using KITTI images. Experimental results show promise in this approach, as our method is capable of correcting perspective distortions on images and outperforms other state-of-the-art methods. Our method also recovers the intended scale and proportion of the image, which is not observed in other works.

Description: Community is the core spatial unit for evaluating sustainable development. However, single data and method seem inadequate for conducting a scientific, effective, and innovative sustainable evaluation of complex community units. In this study, we perform a sustainable-oriented land use scheme using multisource remote sensing, machine learning, and object-based postclassification refinement. Furthermore, we assess the sustainability of the traffic community by data-driven and combined housing, ecosystem services, and landscape configuration. The results indicated that (1) the relationship between housing, ecosystem services, and landscape pattern has obvious synergistic effects, although with dissimilar importance in different sustainability levels. High sustainability level is intensely coordinated with landscape configuration, medium sustainability level is more affected by ecosystem services, and low sustainability level is more related to housing. (2) Community sustainability presents a significant spatial distribution. The communities of high sustainability level are mainly located in both sides of the Pearl River and emerging urban areas, while those of medium sustainability level are distributed sporadically in the study area and those of low sustainability level are concentrated in old towns. (3) Community transformation cannot be accomplished at one step. Along with the continuous optimization of landscape configuration, the priority should be given to housing reconstruction and improvement of ecosystem services further. We provide scientific and effective data-based evidence for urban decision-makers by integrating the advantages of the Earth Observation System and multifactor analysis.

Description: Practically, supply disruption may lead production process to entirely halt (completely disrupted) or the output to differ in the order size (partially disrupted), which makes it more difficult for the retailer to satisfy stochastic market demand. Under the circumstance, the retailer is likely to procure products from two suppliers to effectively alleviate the demand-supply mismatches. Thus, under supply disruption and stochastic demand, this paper develops both backup sourcing and simultaneous sourcing (SS) strategies to analyze the retailer’s performance, where backup sourcing includes wholesale price priority (WPP) and supply reliability priority (SRP). Specifically, (1) under WPP, when the selling price is relatively lower (higher), the retailer is suggested to activate the reliable backup supplier after the realization of supply disruption (demand uncertainty). (2) Under SRP, two scenarios including minor disruption and major disruption can be identified, where the retailer’s order quantity from the reliable (unreliable) supplier under minor disruption scenario is more (less) than that under major. (3) Finally, this paper systematically compares the retailer’s preferences among WPP, SRP, and SS via theoretical results and numerical examples. That is, when the unreliable supplier is more likely to work normally or shortage cost (selling price) is relatively lower, the retailer prefers SPR regarding the unreliable supplier as backup sourcing due to its lower wholesale price and acceptable supply disruption. Otherwise, the retailer is inclined to WPP regarding the reliable supplier as backup sourcing for ensuring all market demand to be satisfied. In addition, unless the emergency prices of two suppliers are extremely higher, backup sourcing strategies could perform better than simultaneous sourcing strategy.

Description: This study investigates a multidepot heterogeneous vehicle routing problem for a variety of hazardous materials with risk analysis, which is a practical problem in the actual industrial field. The objective of the problem is to design a series of routes that minimize the total cost composed of transportation cost, risk cost, and overtime work cost. Comprehensive consideration of factors such as transportation costs, multiple depots, heterogeneous vehicles, risks, and multiple accident scenarios is involved in our study. The problem is defined as a mixed integer programming model. A bidirectional tuning heuristic algorithm and particle swarm optimization algorithm are developed to solve the problem of different scales of instances. Computational results are competitive such that our algorithm can obtain effective results in small-scale instances and show great efficiency in large-scale instances with 70 customers, 30 vehicles, and 3 types of hazardous materials.

Description: Single image super-resolution (SISR) is a traditional image restoration problem. Given an image with low resolution (LR), the task of SISR is to find the homologous high-resolution (HR) image. As an ill-posed problem, there are works for SISR problem from different points of view. Recently, deep learning has shown its amazing performance in different image processing tasks. There are works for image super-resolution based on convolutional neural network (CNN). In this paper, we propose an adaptive residual channel attention network for image super-resolution. We first analyze the limitation of residual connection structure and propose an adaptive design for suitable feature fusion. Besides the adaptive connection, channel attention is proposed to adjust the importance distribution among different channels. A novel adaptive residual channel attention block (ARCB) is proposed in this paper with channel attention and adaptive connection. Then, a simple but effective upscale block design is proposed for different scales. We build our adaptive residual channel attention network (ARCN) with proposed ARCBs and upscale block. Experimental results show that our network could not only achieve better PSNR/SSIM performances on several testing benchmarks but also recover structural textures more effectively.

Description: With the gestation and development of new technologies, new products, new formats, and new models, venture capital investment, as one of the most important forms of open innovation in large companies, plays an increasingly important role in the innovation of mature large companies and entrepreneurial enterprises. To deal with the complex and dynamic environment, the niche of Corporate Venture Capital (CVC) ecological community is investigated from the perspective of the innovation ecosystem. By analyzing the innovation of CVC ecological community with the use of the logistic expansion model, this paper analyzes the stability of evolution game through the replicator dynamic equation and discusses ten parameters of niche state. In the end, we conclude that there are four optimization strategies in the coevolution of major corporations and entrepreneurial firms, namely, niche separation, niche expansion, niche K-R, and niche alliance.

Description: Multiobject detection tasks in complex scenes have become an important research topic, which is the basis of other computer vision tasks. Considering the defects of the traditional single shot multibox detector (SSD) algorithm, such as poor small object detection effect, reliance on manual setting for default box generation, and insufficient semantic information of the low detection layer, the detection effect in complex scenes was not ideal. Aiming at the shortcomings of the SSD algorithm, an improved algorithm based on the adaptive default box mechanism (ADB) is proposed. The algorithm introduces the adaptive default box mechanism, which can improve the imbalance of positive and negative samples and avoid manually set default box super parameters. Experimental results show that, compared with the traditional SSD algorithm, the improved algorithm has a better detection effect and higher accuracy in complex scenes.

Description: The nonlinear resonant responses, mode interactions, and multitime periodic and chaotic oscillations of the cantilevered pipe conveying pulsating fluid are studied under the harmonic external force in this research. According to the nonlinear dynamic model of the cantilevered beam derived using Hamilton’s principle under the uniformly distributed external harmonic excitation, we combine Galerkin technique and the method of multiple scales together to obtain the average equation of the cantilevered pipe conveying pulsating fluid under 1 : 3 internal resonance and principal parametric resonance. Based on the average equation in the polar form, several amplitude-frequency response curves are obtained corresponding to the certain parameters. It is found that there exist the hardening-spring type behaviors and jumping phenomena in the cantilevered pipe conveying pulsating fluid. The nonlinear oscillations of the cantilevered pipe conveying pulsating fluid can be excited more easily with the increase of the flow velocity, external excitation, and coupling degree of two order modes. Numerical simulations are performed to study the chaos of the cantilevered pipe conveying pulsating fluid with the external harmonic excitation. The simulation results exhibit the existence of the period, multiperiod, and chaotic responses with the variations of the fluid velocity or excitation. It is found that, in the cantilevered pipe conveying pulsating fluid, there are the multitime nonlinear vibrations around the left-mode and the right-mode positions, respectively. We also observe that there exist alternately the periodic and chaotic vibrations of the cantilevered pipe conveying pulsating fluid in the certain range.

Description: Objective. Since early diagnosis is very important for treating gastric cancer (GC), we aimed to detect serum small proline-rich protein2A (SPRR2A) to verify its diagnostic value for GC patients. Methods. Serum samples were collected from 200 patients with GC, 100 patients with gastritis, 40 patients with rectal cancer (RC), 50 patients with colon cancer (CC), and 100 healthy controls. An enzyme-linked immunosorbent assay (ELISA) detection kit was applied to measure serum SPRR2A concentration. The correlations between serum SPRR2A and carcinoembryonic antigen (CEA), clinical pathological parameters of GC, and receiver operating characteristic (ROC) curve were also analyzed. Results. The median serum SPRR2A concentration in GC patients was significantly higher than those in healthy controls and gastritis or colorectal cancer patients (P

Description: In a general Markov decision progress system, only one agent’s learning evolution is considered. However, considering the learning evolution of a single agent in many problems has some limitations, more and more applications involve multi-agent. There are two types of cooperation, game environment among multi-agent. Therefore, this paper introduces a Cooperation Markov Decision Process (CMDP) system with two agents, which is suitable for the learning evolution of cooperative decision between two agents. It is further found that the value function in the CMDP system also converges in the end, and the convergence value is independent of the choice of the value of the initial value function. This paper presents an algorithm for finding the optimal strategy pair (πk0,πk1) in the CMDP system, whose fundamental task is to find an optimal strategy pair and form an evolutionary system CMDP(πk0,πk1). Finally, an example is given to support the theoretical results.

Description: Children with autistic spectrum disorder (ASD) often exhibit uncontrollable disruptive behaviour during transfer to the operating room and operating table and at the induction of anaesthesia (sleep). This process often involves the physical restraining of children. These children are then lifted onto the operating table by healthcare staff after being anaesthetized. This predisposes children to fall risk and hospital staff to musculoskeletal injuries. We developed two concept mobility devices, IMOVE-I and -II, based on robotics systems comprising of restraint modules and multi-positional modality (sitting, supine, Trendelenburg). The aim was to intuitively secure children to facilitate the safe induction of sleep and ease of transfer onto operating tables upon sleep. IMOVE-I loads the child in standing position using a dual arm restraint module that is activated by trained healthcare staff. IMOVE-II loads the child in the sitting position by motivating the self-application of restraints. Opinions were obtained from 21 operating theatre healthcare staff with experience in the care of ASD children and parents with ASD children. The mean satisfaction rating of IMOVE-I was 5.62 (95% CI 5.00, 6.27) versus 8.10 (95% CI 7.64, 8.55) in IMOVE-II, p 〈 0.001. IMOVE-II is favoured over IMOVE-I in system operation and safety, ease of use and module functionality.

Description: In this work, we demonstrate how the blockchain and the off-chain storage interact via Oracle-based mechanisms, which build an effective connection between a distributed database and real assets. For demonstration purposes, smart contracts were drawn up to deal with two different applications. Due to the characteristics of the blockchain, we may still encounter severe privacy issues, since the data stored on the blockchain are exposed to the public. The proposed scheme provides a general solution for resolving the above-mentioned privacy issue; that is, we try to protect the on-chain privacy of the sensitive data by using homomorphic encryption techniques. Specifically, we constructed a secure comparison protocol that can check the correctness of a logic function directly in the encrypted domain. By using the proposed access control contract and the secure comparison protocol, one can carry out sensitive data-dependent smart contract operations without revealing the data themselves.

Description: Healthcare facilities are constantly deteriorating due to tight budgets allocated to the upkeep of building assets. This entails the need for improved deterioration modeling of such buildings in order to enforce a predictive maintenance approach that decreases the unexpected occurrence of failures and the corresponding downtime elapsed to repair or replace the faulty asset components. Currently, hospitals utilize subjective deterioration prediction methodologies that mostly rely on age as the sole indicator of degradation to forecast the useful lives of the building components. Thus, this paper aims at formulating a more efficient stochastic deterioration prediction model that integrates the latest observed condition into the forecasting procedure to overcome the subjectivity and uncertainties associated with the currently employed methods. This is achieved by means of developing a hybrid genetic algorithm-based fuzzy Markovian model that simulates the deterioration process given the scarcity of available data demonstrating the condition assessment and evaluation for such critical facilities. A nonhomogeneous transition probability matrix (TPM) based on fuzzy membership functions representing the condition, age and relative deterioration rate of the hospital systems is utilized to address the inherited uncertainties. The TPM is further calibrated by means of a genetic algorithm to circumvent the drawbacks of the expert-based models. A sensitivity analysis was carried out to analyze the possible changes in the output resulting from predefined modifications to the input parameters in order to ensure the robustness of the model. The performance of the deterioration prediction model developed is then validated through a comparison with a state-of-art stochastic model in contrast to real hospital datasets, and the results obtained from the developed model significantly outperformed the long-established Weibull distribution-based deterioration prediction methodology with mean absolute errors of 1.405 and 9.852, respectively. Therefore, the developed model is expected to assist decision-makers in creating more efficient maintenance programs as well as more data-driven capital renewal plans.

Description: Athletes usually take nutritional supplements and perform the specialized training to improve the performance of sport. A quick assessment of their athletic status will help to understand the current physical function of athletes’ status and the effect of nutritional supplementation. Human urine, as one of the most important body indicators, is composed of many metabolites, which can provide effective monitoring information for physical conditions. In this study, temperature-dependent near-infrared spectroscopy (NIRS) technology was used to collect the spectra of athlete’s urine for evaluating the feasibility of rapidly detecting the exercise state of the basketball player. To obtain the detection results accurately, several chemometrics methods including principal component analysis (PCA), variables selection method of variable importance in projection (VIP), continuous 1D wavelet transform (CWT), and partial least square-discriminant analysis (PLS-DA) were employed to develop a classifier to distinguish the physical status of athletes. The optimal classifying results were obtained by wavelet-PLS-DA classifier, whose average precision, sensitivity, and specificity are all above 0.95, and the overall accuracy of all samples is 0.97. These results demonstrate that temperature-dependent NIRS can be used to rapidly assess the physical function of athlete’s status and the effect of nutritional supplementation is feasible. It can be believed that temperature-dependent NIR spectroscopy will obtain applications more widely in the future.

Description: Surface electromyogram (EMG) is a noninvasive measure of muscle electrical activity and has been widely used in a variety of applications. When recorded from the trunk, surface EMG can be contaminated by the cardiac electrical activity, i.e., the electrocardiogram (ECG). ECG may distort the desired EMG signal, complicating the extraction of reliable information from the trunk EMG. Several methods are available for ECG removal from the trunk EMG, but a comparative assessment of the performance of these methods is lacking, limiting the possibility of selecting a suitable method for specific applications. The aim of the present study is therefore to review and compare the performance of different ECG removal methods from the trunk EMG. To this end, a synthetic dataset was generated by combining in vivo EMG signals recorded on the biceps brachii and healthy or dysrhythmia ECG data from the Physionet database with a predefined signal-to-noise ratio. Gating, high-pass filtering, template subtraction, wavelet transform, adaptive filtering, and blind source separation were implemented for ECG removal. A robust measure of Kurtosis, i.e., KR2 and two EMG features, the average rectified value (ARV), and mean frequency (MF), were then calculated from the processed EMG signals and compared with the EMG before mixing. Our results indicate template subtraction to produce the lowest root mean square error in both ARV and MF, providing useful insight for the selection of a suitable ECG removal method.

Description: In recent years, industrial production has become more and more automated. Machine cutting tool as an important part of industrial production have a large impact on the production efficiency and costs of products. In a real manufacturing process, tool breakage often occurs in an instant without warning, which results a extremely unbalanced ratio of the tool breakage samples to the normal ones. In this case, the traditional supervised learning model can not fit the sample of tool breakage well, which results to inaccurate prediction of tool breakage. In this paper, we use the high precision Hall sensor to collect spindle current data of computer numerical control (CNC). Combining the anomaly detection and deep learning methods, we propose a simple and novel method called CNN-AD to solve the class-imbalance problem in tool breakage prediction. Compared with other prediction algorithms, the proposed method can converge faster and has better accuracy.

Description: Organic amendments can reportedly sustain and increase lowland rice productivity in smallholder systems. Few studies have assessed locally-available substrates in hydrologically variable floodplain environments. We investigated the effects of green and farmyard manures on rice yields, and total soil C and N in the Kilombero floodplain, Tanzania. At both the fringe and the middle positions, five treatments were applied in 2016 and 2017, comprising (1) non-amended control, (2) farmyard manure, (3) pre-rice legumes, (4) post-rice legumes and (5) a combination of green and farmyard manures. Residual treatment effects were assessed in 2018 when rice plots were uniformly non-amended. Depending on the year and the position, organic amendments increased rice grain yields by 0.7–3.1 Mg ha–1 above the non-amended control. Sole green and farmyard manure applications had similar effects on grain yield, while a combination of green and farmyard manure led to a significant increase in grain yield above both the control and sole applications of organic amendments in both years. The contribution from biological N2 fixation by legumes ranged from 4 to 61 kg N ha–1. Despite partial N balances being mostly negative, we observed positive residual effects on the yield of the non-amended rice in the third year. Such effects reached up to 4 Mg ha−1 and were largest with post-rice legumes, sole or combined with farmyard manure. Irrespective of the position in the floodplain, manures significantly increased soil C and N contents after two years, hence enhancing soil fertility and resulting in increased rice grain yields. Comparable benefits may be obtained along the hydrological gradients of other large river floodplains of the region and beyond.

Description: The aim of this study was to analyse the genetic and phenotypic differentiation of bacteria isolated from root nodules of Trifolium rubens, a rare clover species. The symbiotic compatibility of selected isolates was investigated using two agronomically important plants, red clover (Trifolium pratense L.) and pea (Pisum sativum L.). A high genetic diversity of analysed strains was shown using the Enterobacterial Repetitive Intergenic Consensus Polymerase Chain Reaction (ERIC-PCR) method. Most of the strains showed a high similarity to R. leguminosarum in the 16S rRNA sequence. Two strains were identified as Agrobacterium spp. There was a strong positive correlation between fresh clover weight and the number of root nodules and a statistically significant increase in the number of the root nodules in selected strains compared to the negative control. Phenotypic tests and BIOLOG analysis showed the ability of the analysed strains to grow in different experimental conditions (pH = 6–10, 0.5–3% NaCl, different carbon and nitrogen sources), which makes them suitable for application as an agronomically important factor.

Description: In this article, we present a new method of dehazing based on the Koschmieder model, which aims to restore an image that has been affected by haze. The difficulty is to improve the estimation of the transmission and the atmospheric light that generally suffer from the nonhomogeneity and the random variability of the environment. The keypoint is to enhance the dehazing of very bright regions of the image in order to improve the treatment of the sky that is often overestimated or underestimated compared to the rest of the scene. The approach proposed in this paper is based on two main contributions: 1. an L0 gradient optimization function weighted by a set of Gaussian filters and based on an iterative algorithm for optimization convergence. Unlike the existing methods using a single value of the atmospheric light for the whole image, our method uses a set of values neighboring an initial estimated value. The fusion is then applied based on Laplacian and Gaussian pyramids to combine all the relevant information from the set of images constructed from atmospheric lights and improves the contrast to recover the colors of the sky without any artifacts. Finally, the results are validated by three criteria: an autocorrelation score (ZNCC), a similarity measure (SSIM) and a visual criterion. The experiments carried out on two datasets show that our approach allows a better dehazing of the images with higher SSIM and ZNCC measurements but also with better visual quality.

Description: Ecuador Andean purple corn (Zea mays L.) was subjected to a germination process at 15–40 °C for 24–168 incubation hours. Purple corn protein concentrates (PCPCs) were obtained by alkaline extraction at pH 8.0 and pH 10.0, followed by an isoelectric precipitation process at pH 4.0, pH 5.0 and pH 6.0. Proteins and phenolic content of PCPCs was calculated. PCPC antioxidant properties were determined by the ferric-reducing antioxidant power (FRAP) in vitro method and by the 2,2-azinobis, 3-ethyl-benzothiazoline-6-sulfonic acid, (ABTS) in vitro method. Andean purple corn seeds were able to germinate under the germination conditions tested in this study. The higher percentage of germination was of 63.33% at 168 h/25 °C. The PCPCs protein profile was characterized for the presence of six bands with molecular weights of 14.50 kDa, 20.12 kDa, 25.18 kDa, 41.85 kDa, 59.59 kDa, and 65.87 kDa. Germinated PCPC presented a high TPC content with ranges of 605.71–1820.00 mg gallic acid equivalents (GAE)/g PCPC dry weight (DW), germinated PCPC/72 h/25 °C presented a higher value of 1820.00 mg GAE/g PCPC, DW. All germinated PCPCs samples assayed presented strong antioxidant activity when measured by the ABTS and FRAP methods. Germinated PCPC/144 h/35 °C presented high antioxidant activity by ABTS with 804.35 µmol Trolox equivalents (TE)/g PCPC DW and germinated PCPC/144 h/30 °C presented a high value by the FRAP method, 987.83 µmol TE/g PCPC DW.

Description: Weedy rice is one of the most common weeds in rice cultivation in many rice areas throughout the world and it is able to cause significant yield reductions. Weedy rice is characterized by a high biological diversity that permits different populations to be identified on the basis of their morphological and physiological traits. This variability contributes to its success in different environments and allows different abiotic stresses, which are intensified by climate change, to be faced. Taller plants, enhanced tillering, seed shattering and the presence of red pericarp, variable hull coloration and awn morphology, linked to a deeper seed dormancy, are some of the traits that help weedy rice to spread in changing environments. The higher phenotypic plasticity and genetic variability of weedy rice make it more able to cope with temperature variations, intermittent water availability, soil salinity, drought conditions and increased CO2 concentrations than cultivated rice. As these abiotic stresses will become more frequent in the future, weedy rice competitiveness may be higher, with a spread of infestations. Thus, the control of weedy rice should be based on an integration of different preventive and agronomic techniques, a sensible use of herbicides and the use of suitable rice varieties.

Description: One of the main contributions of the Capital Assets Pricing Model (CAPM) to portfolio theory was to explain the correlation between assets through its relationship with the market index. According to this approach, the market index is expected to explain the co-movement between two different stocks to a great extent. In this paper, we try to verify this hypothesis using a sample of 3.000 stocks of the USA market (attending to liquidity, capitalization, and free float criteria) by using some functions inspired by cooperative dynamics in physical particle systems. We will show that all of the co-movement among the stocks is completely explained by the market, even without considering the market beta of the stocks.

Description: Ventilator is important equipment for mines as it safeguards the lives under the shaft and ensures other equipment’s proper functioning by providing fresh air. Therefore, how to effectively control the ventilator system becomes more significant. In order to acquire the commonly used model and control strategy for ventilator systems, a new universal ventilator model is established based on the blast capacity differential pressure in the ventilating duct and the ventilator motor model. Then, an adaptive Chebyshev neural network (ACNN) controller is proposed to effectively control the ventilator system where the unknown load torque and the unknown disturbance caused by the complex environment under the shaft are approximated by the Chebyshev neural network (CNN). Afterwards, an appropriate Lyapunov function candidate is designed to guarantee the stability of the proposed controller and the closed-loop ventilator system. Finally, the ACNN controller has been demonstrated to be effective in terms of validity and precision for the new proposed ventilator model through the simulations.

Description: Nonalcoholic fatty liver disease (NAFLD) is currently the most common chronic liver disease worldwide in part due to the concomitant obesity pandemic and insulin resistance (IR). It is increasingly becoming evident that NAFLD is a disease affecting numerous extrahepatic vital organs and regulatory pathways. The molecular mechanisms underlying the nonalcoholic steatosis formation are poorly understood, and little information is available on the pathways that are responsible for the progressive hepatocellular damage that follows lipid accumulation. Recently, much research has focused on the identification of the epigenetic modifications that contribute to NAFLD pathogenesis. Noncoding RNAs (ncRNAs) are one of such epigenetic factors that could be implicated in the NAFLD development and progression. In this review, we summarize the current knowledge of the genetic and epigenetic factors potentially underlying the disease. Particular emphasis will be put on the contribution of microRNAs (miRNAs), long noncoding RNAs (lncRNAs), and circular RNAs (circRNAs) to the pathophysiology of NAFLD as well as their potential use as therapeutic targets or as markers for the prediction and the progression of the disease.

Description: This paper aims to improve the metallurgical properties of vanadium-titanium magnetite (VTM) concentrates pellets by applying solid waste containing B2O3. Thus, the effects of adding B2O3 on the drop strength, compressive strength, pores area ratio, high-temperature metallurgical properties, and microstructure of VTM pellets were studied through pelletizing and roasting experiments. Results show that the addition of B2O3 reagent is not conducive to the increase of the drop strength of the green pellets. Nevertheless, the compressive strength and fracture toughness of the roasted pellets can be improved by adding more B2O3 during the pelletizing. The reduction degree of VTM pellets is firstly decreased and then increased with the added B2O3 amount. It is possible to improve the compaction degree and restrain the reduction-pulverization degree of the pellet by a low amount of additive (B2O3). The reduction-expansion performance of VTM pellets, in turn, can be raised by adding B2O3.