ALBERT

Description: Ghana is urbanising rapidly, and over half of the country’s population have lived in urban areas since 2010. Although research has proliferated to explore Ghana’s urbanisation, there is a dearth of research that holistically explores the wider sustainability implications of urbanisation, offers comparative perspectives in the context of large and smaller urban areas, and provides a perspective of local level urbanisation in the context of resource extraction (mining). This study comparatively assesses two urban areas in Ghana (Kumasi and Obuasi), by conducting a spatio-temporal analysis of land cover change through remote sensing and by analysing demographic change through a synthesis of published population data, in order to highlight the sustainability implications of urbanisation. The results show that urbanisation has been rapid, and has resulted in changes in land cover and demography in Kumasi and Obuasi. The sustainability implications of urbanisation are identified to include limited economic opportunities, socio-spatial segregation, and destruction of natural vegetation. The evidence in this study provides insights into urbanisation in Ghana, and suggests that the positive sustainability impacts of urbanisation may be eroded by how factors such as market forces and land tenure interact at the local level.

Description: Ablation of BaWO4 Raman crystals with different impurity concentrations by ultrashort laser pulses was experimentally studied. Laser pulses with duration varying from 0.3 ps to 1.6 ps at wavelengths of 515 nm and 1030 nm were applied. A single-pulse optical damage threshold of the crystal surface changed from 1.3 J/cm2 to 4.2 J/cm2 depending on the laser pulse parameters and BaWO4 crystal purity. The optical damage threshold under multi-pulse irradiation was an order of magnitude less.

Description: Partial and total photoionization cross sections of iron-peak elements are important for the determination of abundances in late-type stars and nebular objects. We have investigated photoionization of neutral chromium from the ground and excited states in the low energy region from the first ionization threshold at 6.77 eV to 30 eV. Accurate descriptions of the initial bound states of Cr I and the final residual Cr II ionic states have been obtained in the multiconfiguration Hartree-Fock method together with adjustable configuration expansions and term-dependent non-orthogonal orbitals. The B-spline R-matrix method has been used for the calculation of photoionization cross sections. The 194 LS final ionic states of Cr II 3d44s, 3d34s2, 3d5, 3d44p, and 3d34s4p principal configurations have been included in the close-coupling expansion. The inclusion of all terms of these configurations has significant impact on the near-threshold resonance structures as well as on the nonresonant background cross sections. Total photoionization cross sections from the ground 3d54sa7S and excited 3d54sa5S, 3d44s2a5D, 3d54pz5P, and 3d44s4py5P states of Cr I have been compared with other available R-matrix calculation to estimate the likely uncertainties in photoionization cross sections. We analyzed the partial photoionization cross sections for leaving the residual ion in various states to identify the important scattering channels, and noted that 3d electron ionization channel becomes dominant at higher energies.

Description: The optimization of ecological resource allocation is increasingly seen as a potential solution for urban revitalization and sustainable land use planning, and the key point is to assess and simulate the spatial arrangement of the ecological land. In this study, we proposed a conceptual framework with the aim of reoccupying ecological resources for rust belt cities from the perspective of eco-economic trade-offs. The ecological security pattern, the urban development pattern, and the ecological quality of cropland were constructed and evaluated to measure the development level of an ecological system and a socio-economic system. Furthermore, the results were used as the constraints that influenced land use distribution to simulate the ecological land reoccupation pattern. The suitable area, the preservation area, the configurable area, and the unsuitable area in the reoccupation pattern accounted for 6.94%, 49.97%, 28.17%, and 0.69%, respectively. Significantly, under strict cropland protection policies, the available space for ecological land expansion was heavily compressed. Therefore, the emphasis on agricultural production should be reexamined to release more space for ecological resources. This method could be an effective pathway to alleviate the pressures on urban and natural space caused by the competition between land-use activities, such as economic development, agricultural production, and ecological conservation. The findings are expected to promote urban revitalization, green agriculture, and sustainable social development in rust belt cities, and provide certain references for the utilization of land resources and regional policy making.

Description: A modified expression of the electron entropy production in a plasma is deduced by means of the Kelly equations of state instead of the ideal gas equations of state. From the Debye–Hückel model which considers the interaction between the charges, such equations of state are derived for a plasma and the entropy is deduced. The technique to obtain the modified entropy production is based on usual developments but including the modified equations of state giving the regular result plus some extra terms. We derive an expression of the modified entropy production in terms of the tensorial Hermitian moments hr1…rm(m) by means of the irreducible tensorial Hermite polynomials.

Description: As acidic deposition has decreased across Eastern North America, forest soils at some sites are beginning to show reversal of soil acidification. However, the degree of recovery appears to vary and is not fully explained by deposition declines alone. To assess if other site and soil factors can help to explain degree of recovery from acid deposition, soil resampling chemistry data (8- to 24-year time interval) from 23 sites in the United States and Canada, located across 25° longitude from Eastern Maine to Western Ontario, were explored. Site and soil factors included recovery years, sulfate (SO42−) deposition history, SO42− reduction rate, C horizon pH and exchangeable calcium (Ca), O and B horizon pH, base saturation, and exchangeable Ca and aluminum (Al) at the time of the initial sampling. We found that O and B horizons that were initially acidified to a greater degree showed greater recovery and B horizon recovery was further associated with an increase in recovery years and lower initial SO42− deposition. Forest soils that seemingly have low buffering capacity and a reduced potential for recovery have the resilience to recover from the effects of previous high levels of acidic deposition. This suggests, that predictions of where forest soils acidification reversal will occur across the landscape should be refined to acknowledge the importance of upper soil profile horizon chemistry rather than the more traditional approach using only parent material characteristics.

Description: The genus Thujopsis (Cupressaceae) comprises monoecious coniferous trees endemic to Japan. This genus includes two varieties: Thujopsis dolabrata (L.f.) Siebold et Zucc. var. dolabrata (southern variety, Td) and Thujopsis dolabrata (L.f.) Siebold et Zucc. var. hondae Makino (northern variety, Th). The aim of this study is to understand the phylogeographic and genetic population relationships of the genus Thujopsis for the conservation of genetic resources and future breeding. A total of 609 trees from 22 populations were sampled, including six populations from the Td distribution range and 16 populations from the Th distribution range. The genotyping results for 19 expressed sequence tag (EST)-based simple sequence repeat (SSR) markers, followed by a structure analysis, neighbor-joining tree creation, an analysis of molecular variance (AMOVA), and hierarchical F statistics, supported the existence of two genetic clusters related to the distribution regions of the Td and Th varieties. The two variants, Td and Th, could be defined by their provenance, in spite of the ambiguous morphological differences between the varieties. The distribution ranges of both variants, which have been defined from their morphology, was confirmed by genetic analysis. The Th populations exhibited relatively uniform genetic diversity, most likely because Th refugia in the glacial period were scattered throughout their current distribution area. On the other hand, there was a tendency for Td’s genetic diversity to decrease from central to southern Honshu island. Notably, the structure analysis and neighbor-joining tree suggest the hybridization of the two varieties in the contact zone. More detailed studies of the genetic structure of Td are required in future analyses.

Description: Geospatial data is urgently needed in decision-making processes to achieve Sustainable Development Goals (SDGs) at global, national, regional and local scales. While the advancement of geo-technologies to obtain or produce geospatial data has become faster and more affordable, many countries in the global south still experience a geospatial data scarcity at the rural level due to complex geographical terrains, weak coordination among institutions and a lack of knowledge and technologies to produce visualised geospatial data like maps. We proposed a collaborative spatial learning framework that integrates the spatial knowledge of stakeholders to obtain geospatial data. By conducting participatory mapping workshops in three villages in the Deli Serdang district in Indonesia, we tested the framework in terms of facilitating communication and collaboration of the village stakeholders while also supporting knowledge co-production and social learning among them. Satellite images were used in digital and non-digital mapping workshops to support village stakeholders to produce proper village maps while fulfilling the SDGs’ emphasis to make geospatial data available through a participatory approach.

Description: In agricultural science, the establishment of a given cropping system in mountainous areas is often understood from the relationship between differences of altitude-specific, agroecological conditions and crop cultivation characteristics. However, social factors can also play a role. We aimed to clarify how the cropping system is maintained through examining sociocultural factors, specifically land tenure and marriage systems, in an agricultural community in rural mountainous Africa. Several surveys based on participatory observation accompanied by home stays were conducted to determine people who participated in cropping systems and to understand which social system maintained the cropping system. We found that around 70% of target households in Kiboguwa village cultivated three staple crops (maize, cassava and rice) using the same cropping system and almost no farmers outside the village used the village’s sloped fields, meaning that the villagers maintained the cropping system. Households acquired nearby sloped fields by various means such as inheriting land through maternal lineage of household heads or wives. We observed virilocal and uxorilocal residence at similar degrees—and if either the husband or wife was from outside the village, that household would also have fields outside the village. However, nearly 80% of marriages were intravillage and villagers predominantly used fields located within the village limits regardless of the residence type, which helped maintain the cropping system.

Description: East Asia is the most complex region in the world for aerosol studies, as it encounters a lot of varieties of aerosols, and aerosol classification can be a challenge in this region. In the present study, we focused on the relationship between aerosol types and aerosol optical properties. We analyzed the long-term (2005–2012) data of vertical profiles of aerosol extinction coefficients, lidar ratio (Sp), and other aerosol optical properties obtained from a NASA Micro-Pulse Lidar Network and Aerosol Robotic Network site in northern Taiwan, which frequently receives Asian continental outflows. Based on aerosol extinction vertical profiles, the profiles were classified into two types: type 1 (single-layer structure) and type 2 (two-layer structure). Fall season (October–November) was the prevailing season for the Type 1, whereas type 2 mainly happened in spring (March–April). In type 1, air masses normally originated from three regional sectors, i.e., Asia continental (AC), Pacific Ocean (PO), and Southeast Asia (SA). The mean Sp values were 39 ± 17 sr, 30 ± 12 sr, and 38 ± 18 sr for the AC, PO, and SA sectors, respectively. The Sp results suggested that aerosols from the AC sector contained dust and anthropogenic particles, and aerosols from the PO sector were most likely sea salts. We further combined the EPA dust event database and backward trajectory analysis for type 2. Results showed that Sp was 41 ± 14 sr and 53 ± 21 sr for dust storm and biomass-burning events, respectively. The Sp for biomass-burning events in type 2 showed two peaks patterns. The first peak occurred within range of 30–50 sr corresponding to urban pollutant, and the second peak occurred within range of 60–80 sr in relation to biomass burning. Finally, our study summarized the Sp values for four major aerosol types over northern Taiwan, viz., urban (42 ± 18 sr), dust (34 ± 6 sr), biomass-burning (69 ± 12 sr), and oceanic (30 ± 12 sr). Our findings provide useful references for aerosol classification and air pollution identification over the western North Pacific.

Description: Urbanization is a complex process closely involving the economy, society, and population. While monitoring urban development and exploring the industry-driving force in a real-time and effective way are the prerequisites for optimizing industry structure, narrowing the urban development gap, and achieving sustainable development. Nighttime light is an effective tool to monitor urban development from a macro perspective. However, the systematic research of nighttime light spatiotemporal variation modes and the industry-driving force of urban nighttime light are still unknown. Considering these issues, this paper analyzes the spatiotemporal variation modes of the average light index (ALI) and investigates the industry-driving force of ALI in 100 major prefecture-level cities across China mainland based on National Polar-Orbiting Partnership Satellite Visible Infrared Imaging Radiometer Suite (NPP VIIRS). The conclusions are as following three aspects. First, ALI is observed a funnel pattern among four regions in spatial dimension, with low in center and high in the surrounding, and it shows 5 variation modes (“W,” “√,” “Exponent,” “Logarithm,” and “N”) in temporal dimension, of which the “√” mode accounts for the highest proportion (60%). Second, the industry structure is closely related to ALI. Besides, the factor analysis result illustrates that the secondary and tertiary industry are the driving industries of ALI. Third, the classification result based on the industry contribution rate indicates that cities driven by different industries show significant spatial distribution differences. The three major industry-driving cities are mainly distributed in central and western regions, the secondary and tertiary industry-driving cities are evenly distributed, and the tertiary industry-driving cities are mainly distributed in provincial capitals. From 2013 to 2018, the fluctuation of city distribution driven by different industries changes obviously. The number of tertiary industry-driving cities increases steadily and the three major industry-driving cities are distributed wider spatially. Additionally, the impacts of location and raw coal on ALI are discussed. In general, these findings are essential to further research urban development mode and can be considered as the reference to narrow urban development gap.

Description: A low-mass and low-volume dual-polarization L-band radiometer is introduced that has applications for ground-based remote sensing or unmanned aerial vehicle (UAV)-based mapping. With prominent use aboard the ESA Soil Moisture and Ocean Salinity (SMOS) and NASA Soil Moisture Active Passive (SMAP) satellites, L-band radiometry can be used to retrieve environmental parameters, including soil moisture, sea surface salinity, snow liquid water content, snow density, vegetation optical depth, etc. The design and testing of the air-gapped patch array antenna is introduced and is shown to provide a 3-dB full power beamwidth of 37°. We present the radio-frequency (RF) front end design, which uses direct detection architecture and a square-law power detector. Calibration is performed using two internal references, including a matched resistive source (RS) at ambient temperature and an active cold source (ACS). The radio-frequency (RF) front end does not require temperature stabilization, due to characterization of the ACS noise temperature by sky measurements. The ACS characterization procedure is presented. The noise equivalent delta (Δ) temperature (NEΔT) of the radiometer is ~0.14 K at 1 s integration time. The total antenna temperature uncertainty ranges from 0.6 to 1.5 K.

Description: Avalanche disasters are extremely destructive and catastrophic, often causing serious casualties, economic losses and surface erosion. However, far too little attention has been paid to utilizing remote sensing mapping avalanches quickly and automatically to mitigate calamity. Such endeavors are limited by formidable natural conditions, human subjective judgement and insufficient understanding of avalanches, so they have been incomplete and inaccurate. This paper presents an objective and widely serviceable method for regional auto-detection using the scattering and interference characteristics of avalanches extracted from Sentinel-1 SLC images. Six indices are established to distinguish avalanches from surrounding undisturbed snow. The active avalanche belts in Kizilkeya and Aktep of the Western TianShan Mountains in China lend urgency to this research. Implementation found that smaller avalanches can be consistently identified more accurately in descending images. Specifically, 281 and 311 avalanches were detected in the ascending and descending of Kizilkeya, respectively. The corresponding numbers on Aktep are 104 and 114, respectively. The resolution area of single avalanche detection can reach 0.09 km2. The performance of the model was excellent in all cases (areas under the curve are 0.831 and 0.940 in descending and ascending of Kizilkeya, respectively; and 0.807 and 0.938 of Aktep, respectively). Overall, the evaluation of statistical indices are POD 〉 0.75, FAR 〈 0.34, FOM 〈 0.13 and TSS 〉 0.75. The results indicate that the performance of the innovation proposed in this paper, which employs multivariate comprehensive descriptions of avalanche characteristics to actualize regional automatic detection, can be more objective, accurate, applicable and robust to a certain extent. The latest and more complete avalanche inventory generated by this design can effectively assist in addressing the increasingly severe avalanche disasters and improving public awareness of avalanches in alpine areas.

Description: An extremely heavy rainfall event hit Guangdong province, China, from 27 August to 1 September 2018. There were two different extreme rain regions, respectively, at the Pearl River estuary and eastern Guangdong, and a record-breaking daily precipitation of 1056.7 mm was observed at Gaotan station on 30 August. This paper utilizes a suite of observations from soundings, a gauge network, disdrometers, and polarimetric radars to gain insights to the two rainfall centers. The large-scale meteorological forcing, rainfall patterns, and microphysical processes, as well as radar-based precipitation signatures are investigated. It is concluded that a west-moving monsoon depression played a critical role in sustaining the moisture supply to the two extreme rain regions, and the combined orographic enhancement further contributed to the torrential rainfall over Gaotan station. The raindrop size distributions (DSD) observed at Zhuhai and Huidong stations, as well as the observed polarimetric radar signatures indicate that the rainfall at Doumen region was characterized by larger raindrops but a lower number concentration compared with that at Gaotan region. In addition, the dual-polarization radars are used to quantify precipitation intensity during this extreme event, providing timely information for flood warning and emergency management decision-making.

Description: Earth remote sensing optical satellite systems are often divided into two categories—geosynchronous and sun-synchronous. Geosynchronous systems essentially rotate with the Earth and continuously observe the same region of the Earth. Sun-synchronous systems are generally in a polar orbit and view differing regions of the Earth at the same local time. Although similar in instrument design, there are enough differences in these two types of missions that often the calibration of the instruments can be substantially different. Thus, respective calibration teams develop independent methods and do not interact regularly or often. Yet, there are numerous areas of overlap and much to learn from one another. To address this issue, a panel of experts from both types of systems was convened to discover common areas of concern, areas where improvements can be made, and recommendations for the future. As a result of the panelist’s efforts, a set of eight recommendations were developed. Those that are related to improvements of current technologies include maintaining sun-synchronous orbits (not allowing orbital decay), standardization of spectral bandpasses, and expanded use of well-developed calibration techniques such as deep convective clouds, pseudo invariant calibration sites, and lunar methodologies. New techniques for expanded calibration capability include using geosynchronous instruments as transfer radiometers, continued development of ground-based prelaunch calibration technologies, expansion of RadCalNet, and development of space-based calibration radiometer systems.

Description: As satellite observation technology improves, the number of remote sensing images significantly and rapidly increases. Therefore, a growing number of studies are focusing on remote sensing image retrieval. However, having a large number of remote sensing images considerably slows the retrieval time and takes up a great deal of memory space. The hash method is being increasingly used for rapid image retrieval because of its remarkably fast performance. At the same time, selecting samples that contain more information and greater stability to train the network has gradually become the key to improving retrieval performance. Given the above considerations, we propose a deep hash remote sensing image retrieval method, called the hard probability sampling hash retrieval method (HPSH), which combines hash code learning with hard probability sampling in a deep network. Specifically, we used a probability sampling method to select training samples, and we designed one novel hash loss function to better train the network parameters and reduce the hashing accuracy loss due to quantization. Our experimental results demonstrate that HPSH could yield an excellent representation compared with other state-of-the-art hash approaches. For the university of California, merced (UCMD) dataset, HPSH+S resulted in a mean average precision (mAP) of up to 90.9% on 16 hash bits, 92.2% on 24 hash bits, and 92.8% on 32 hash bits. For the aerial image dataset (AID), HPSH+S achieved a mAP of up to 89.8% on 16 hash bits, 93.6% on 24 hash bits, and 95.5% on 32 hash bits. For the UCMD dataset, with the use of data augmentation, our proposed approach achieved a mAP of up to 99.6% on 32 hash bits and 99.7% on 64 hash bits.

Description: The research presented in the paper intends to overcome an information gap on the evolution of urbanized surfaces in Italy which in the studies carried out so far have never been available. The only historical data on this form of land use date back to the 1950s, and were extracted from a national cartography created by the Military Geographic Institute. The next chronological section available was then that of the noughties, already digital. However, much more frequent data were processed by the ten-year censuses by the National Institute of Statistics, but concerning buildings and not urbanized areas. By processing building census data, this study has put together some novel information on land take dynamics between the end of World War II and the year 2000, highlighting the more intensive processes that occurred at an extraordinary rate in the ‘70′s and ‘80′s, obtaining unprecedented information on the speed of transformation of the territory in these decades of economic boom. Through this method, we were able to obtain numerous geographical indications previously lacking on a national scale, highlight the yet significant vigor of this phenomenon and develop an inferential scenario.

Description: Access and use of seed of improved varieties of groundnut among farmers can improve farmers’ livelihoods and contribute to the potential of crop production in Tanzania. This paper analyzes factors underpinning the adoption of improved groundnut varieties among farmers to pave the way for upscaling quality seed used for increased production and commodity business in farming communities. A four-stage stratified sampling was used to collect data from 300 groundnut farmers in seven agro-ecological zones through individual interviews. Secondary data were collected from the literature and the Tanzania Agricultural Research Institute at Naliendele centre (TARI–Naliendele). Descriptive statistics and Probit regression model were used for data analysis. The empirical results showed that Johari 1985, Pendo 1998, Naliendele 2009, Mnanje 2009, Mangaka 2009 and Nachi 2015, are the main six improved groundnut varieties used by farmers, with Pendo 1998 having the highest adoption rate (17.1%). In the grain market, four varieties, namely Pendo 1998, Mnanje 2009, Nachi 2015 and Johari 1985, were observed to be highly preferred by grain off-takers. Furthermore, among the adopted improved varieties, Nachi 2015, is observed to be the most consistent high yielding variety, ranging from 1100 kg/ha to 1500 kg/ha in all agro-ecological zones. A farmer’s decision to adopt new varieties is affected by age and gender, farmer group membership, availability of improved seed and seed cost. Overall, male farmers are more likely to adopt improved varieties of groundnut than female farmers. The implications of these findings are also discussed, in particular in the area of policy support.

Description: This study presents an integrated examination of both the ecosystem services (ES) and ecosystem disservices (EDS) associated with smallholder animal husbandry in rural livelihoods in three villages in southeast South Africa. It recognises the contribution of ES supporting and resulting from smallholder livestock and poultry production, but also details the limiting factors or EDS, such as tick-borne disease, birds of prey or unpalatable rangeland, produced by the same system. Using a mixed-methods approach, including focus group discussions with various Participatory Learning and Action (PLA) activities, key informant interviews, household surveys and land-use change mapping on GIS, we consider the relative value and benefits from ES after the effects of EDS, as well as the management and strategies that households adopt to minimise EDS. The effects of ES and EDS were expressed in economic terms to provide a common framework to assess the magnitude of their contribution or effect. Although animal husbandry made measurable contributions to households, with an average gross value of between R2605–R9753 across villages, EDS undermined the meaningful production of livestock and poultry goods and services. The average EDS-induced economic loss in households was between R8289–R22,426 per annum. Despite active management, often at substantial cost to the household, EDS undermined the health of livestock which resulted in a loss of the animal or potential goods and services produced. We emphasise the need to recognise both the positive and negative contributions of ecosystems to identify the complex feedbacks between ES and EDS which interact to determine local ways of doing things.

Description: Subcooled water is the primordial matrix for ice embryo formation by homogeneous and heterogeneous nucleation. The knowledge of the specific Gibbs free energy and other thermodynamic quantities of subcooled water is one of the basic prerequisites of the theoretical analysis of ice crystallization in terms of classical nucleation theory. The most advanced equation of state of subcooled water is the IAPWS G12-15 formulation. The determination of the thermodynamic quantities of subcooled water on the basis of this equation of state requires the iterative determination of the fraction of low-density water in the two-state mixture of low-density and high-density subcooled water from a transcendental equation. For applications such as microscopic nucleation simulation models requiring highly frequent calls of the IAPWS G12-15 calculus, a new two-step predictor-corrector method for the approximative determination of the low-density water fraction has been developed. The new solution method allows a sufficiently accurate determination of the specific Gibbs energy and of all other thermodynamic quantities of subcooled water at given pressure and temperature, such as specific volume and mass density, specific entropy, isothermal compressibility, thermal expansion coefficient, specific isobaric and isochoric heat capacities, and speed of sound. The misfit of this new approximate analytical solution against the exact numerical solution was demonstrated to be smaller than or equal to the misprediction of the original IAPWS G12-15 formulation with respect to experimental values.

Description: Species with wide geographical ranges exhibit specific adaptations to local climates, which may result in diverging responses among populations to changing conditions. Climate change has advanced spring phenology worldwide, but questions of whether and how the phenological responses to warming differ among individuals across the natural range of a species remain. We conducted two experiments in January and April 2019, and performed daily observations of the timings of bud break in 1-year-old seedlings of sugar maple (Acer saccharum Marshall) from 25 Canadian provenances at two thermal conditions (14/10 and 18/14 °C day/night temperature) in a controlled environment. Overall, bud break started 6 days from the beginning of the experiments and finished after 125 days. The earlier events were observed in seedlings originating from the colder sites. Bud break was delayed by 4.8 days per additional degree Celsius in the mean annual temperature at the origin site. Warming advanced the timing of bud break by 17–27 days in January and by 3–8 days in April. Similar advancements in bud break were observed among provenances under warming conditions, which rejected our hypothesis that sugar maple populations have different phenological responses to warming. Our findings confirm the differentiation in ecotypes for the process of bud break in sugar maple. In cases of homogenous spring warming across the native range of sugar maple, similar advancements in bud phenology can be expected in different populations.

Description: This case study from Stockholm County, Sweden, explores practitioners’ experiences of barriers and bridges in municipal planning practices to support actions for ecosystem services. This qualitative study is based on information gathered from a focus group, workshops, and semi-structured interviews, which aided in identifying key factors for integrating ecosystem services in municipal planning. We identified 10 key factors divided into three themes: (i) regulatory framework and political support, (ii) local organizational capacity, and (iii) local adaptation of tools and practices. In particular, the practitioners pointed to the need for the development of legal support and regulations for ecosystem services on the national and EU policy levels. Furthermore, the need for local capacity building and understanding of ecosystem services as well as increased regional support to enhance local knowledge exchange and learning was emphasized. Also, in a decentralized local governance system such as in Sweden, to fully implement ecosystem services in urban planning for sustainable development, locally adapted practical tools and monitoring procedures were considered important.

Description: Sugarcane is an important industrial crop because it is the major source of white sugar. It is also one of the crops for the alcohol and biofuel industries. Disease-causing organisms can significantly decrease the productivity of sugarcane plants and sugar quality. Among the disease-causing organisms, Colletotrichum falcatum Went causes the most significant economic loss (5–50%) in the sugarcane production due to red rot disease. This loss results in only 31% sugar recovery. It is reported that C. falcatum can kill sugarcane plants. Currently, there is no sustainable way of preventing red rot disease from spreading in sugarcane plantations. Many popular sugarcane varieties are no longer used in sugarcane cultivation because of their susceptibility to C. falcatum. The objectives of this manuscript were to: (i) summarize existing approaches for the early detection of red rot disease and controlling techniques of red rot disease in the field and laboratory and (ii) assess red rot disease control effectiveness so as to propose better methods for mitigating the spread C. falcatum. If our proposition is adopted or practiced, it could significantly contribute to the mitigation of C. falcatum infection in the sugarcane industry. This could enable achieving sustainable cultivation of sugarcanes to guarantee the sustainability of the sugar industry in the tropics and the subtropics.

Description: The transition from intensive conventional agriculture to sustainable agriculture has become a global priority. This is due to the need for environmentally friendly agriculture to ensure sufficient food for a rapidly growing population. The bioeconomy is essential to progress in the field of sustainable agriculture. It contributes to the conservation of biological resources through circular and comprehensive management. The bioeconomy prioritizes the reduction and reuse of materials and products. The focus of this study is the use of biodegradable/compostable raffia in protected horticultural crops in the Province of Almería (Spain). The analysis and evaluations, based on an extensive literature review and information given by stakeholders, determined that biodegradable raffia use significantly improves the management of residual biomass in Almería. However, biodegradable raffia is only used in a small percentage of crops even though it is a sustainable alternative and profitable for farmers. The economic analysis incorporates the higher cost of recycling non-biodegradable raffia.

Description: Sustainable agricultural production is endangered by several ecological factors, such as drought, extreme temperatures, excessive salts, parasitic ailments, and insect pest infestation. These challenging environmental factors may have adverse effects on future agriculture production in many countries. In modern agriculture, conventional crop-breeding techniques alone are inadequate for achieving the increasing population’s food demand on a sustainable basis. The advancement of molecular genetics and related technologies are promising tools for the selection of new crop species. Gene pyramiding through marker-assisted selection (MAS) and other techniques have accelerated the development of durable resistant/tolerant lines with high accuracy in the shortest period of time for agricultural sustainability. Gene stacking has not been fully utilized for biotic stress resistance development and quality improvement in most of the major cultivated crops. This review emphasizes on gene pyramiding techniques that are being successfully deployed in modern agriculture for improving crop tolerance to biotic and abiotic stresses for sustainable crop improvement.

Description: Upwelling and downwelling processes play a critical role in the connectivity between offshore waters and coastal ecosystems, having relevant implications in terms of intense biogeochemical activity and global fisheries production. A variety of in situ and remote-sensing networks were used in concert with the Iberia–Biscay–Ireland (IBI) circulation forecast system, in order to investigate two persistent upwelling and downwelling events that occurred in the Northwestern (NW) Iberian coastal system during summer 2014. Special emphasis was placed on quality-controlled surface currents provided by a high-frequency radar (HFR), since this land-based technology can effectively monitor the upper layer flow over broad coastal areas in near-real time. The low-frequency spatiotemporal response of the ocean was explored in terms of wind-induced currents’ structures and immediacy of reaction. Mean kinetic energy, divergence and vorticity maps were also calculated for upwelling and downwelling favorable events, in order to verify HFR and IBI capabilities, to accurately resolve the prevailing surface circulation features, such as the locus of a persistent upwelling maximum in the vicinity of Cape Finisterre. This integrated approach proved to be well-founded to efficiently portray the three-dimensional characteristics of the NW Iberian coastal upwelling system regardless of few shortcomings detected in IBI performance, such as the misrepresentation of the most energetic surface dynamics or the overestimation of the cooling and warming associated with upwelling and downwelling conditions, respectively. Finally, the variability of the NW Iberian upwelling system was characterized by means of the development of a novel ocean-based coastal upwelling index (UI), constructed from HFR-derived hourly surface current observations (UIHFR). The proposed UIHFR was validated against two traditional UIs for 2014, to assess its credibility. Results suggest that UIHFR was able to adequately categorize and characterize a wealth of summer upwelling and downwelling events of diverse length and strength, paving the way for future investigations of the subsequent biophysical implications.

Description: Research Highlights: The informed decisions on land use require assessment of the impacts of these decisions on the supply of different ecosystem services. Background and Objectives: Scenario modeling can be used to provide harmonized and quantitative information on the impacts of various zoning decisions on the provision of various ecosystem services. In this study, we explored the effects of land-use zoning decisions on the provision of roundwood and energy wood, carbon stock of living tree components, berry yields, scenic beauty and recreation. Materials and Methods: Three alternative forest scenarios were formulated in terms of restrictions on forest management for already established land-use zones by the provinces in Finland. These data were integrated with the National Forest Inventory (NFI) plot data for forest dynamics modeling. Results: In Finland, 9% of the forest land was protected and 9% was under restricted forest management due to legislative decisions, forest owners’ decisions, or regional land use plans in 2016. These established zoning decisions resulted in an estimated 17% smaller roundwood and energy wood removals per year in 2016–2025 compared to the estimated wood removals in the scenario without any restrictions. The decrease in annual gross stumpage earnings was EUR 775 million per year. The carbon stock of living tree components in 2025 was 12% larger than in the scenario without any restrictions. Bilberry yield increased due to the restrictions considered in our study, while the restrictions had only a slight effect on cowberry yield at province and country levels. The restrictions increased the recreation value, particularly in Lapland, but only slightly affected scenic beauty at province and country levels. Conclusions: Scenario analyses support informed decision making and the balancing of different forest uses. Harmonized translation of restrictions and the use of standard indicators to model the impacts also support comparisons between the regions.

Description: Shore-based phased-array HF radars have been widely used for remotely sensing ocean surface current, wave, and wind around the world. However, phase uncertainties, especially phase distortions, in receiving elements significantly degrade the performance of beam forming and direction-of-arrival (DOA) estimation for phased-array HF radar. To address this problem, the conventional array signal model is modified by adding a direction-based phase error matrix. Subsequently, an array phase manifold calibration method using antenna responses of incoming ship echoes is proposed. Later, an assessment on the proposed array calibration method is made based on the DOA estimations and current measurements that are obtained from the datasets that were collected with a multi-frequency HF (MHF) radar. MHF radar-estimated DOAs using three calibration strategies are compared with the ship directions that are provided by an Automatic Identification System (AIS). Additionally, comparisons between the MHF radar-derived currents while using three calibration strategies and Acoustic Doppler Current Profilers (ADCP)-measured currents are made. The results indicate that the proposed array calibration method is effective in DOA estimation and current measurement for phased-array HF radars, especially in the phase distortion situation.

Description: In this study we (1) mapped the areal extent of current dust sources over Northern Africa between 8°W–31°E and 22°N - Mediterranean coast; and (2) identified and characterized the geomorphic units and soil types that emit dust from these areas. We used the full resolution (3 km) data from the MSG-SEVIRI to map dust sources over a 2-year period between 2005–2006, and examined these regions with remotely sensed images and geomorphic and soil maps. A total of 〉2600 individual dust emission events were mapped; with frequency up to 34 events in the 2-year study period. The areal extent of dust emission sources exhibited a lognormal distribution with most sources ranging from 20 to 130 km2. Most dust events were singular and related to a variety of specific geomorphic units. Dust events that created hotspots were mostly located over playas and fluvial landforms, and to a lesser extent over sand dunes and anthropogenic affected regions. About 20% of dust hotspots were offset a few kilometers from clear geomorphic units. Quantitative analysis of emissions revealed that dust sourced from various geomorphic units, among them playas (12%) and fluvial systems (10%). The importance of sand dunes as dust-emission sources greatly differs between examined datasets (7% vs. 30%). Our study emphasizes the importance of scattered dust emission events that are not considered as hotspots, as these sources are usually neglected in dust emission modeling.

Description: n/a

Description: In this study, dynamic hardness tests on solid and engineered wood flooring specimens of Eucalyptus globulus Labill. and Eucalyptus grandis W. Hill ex Maiden hardwoods were performed because nowadays, these fast-growing hardwoods are still scarcely employed for this use. Furthermore, another two examples of hardwood commonly applied on wood flooring, Quercus robur L. and Hymenaea courbaril L., were also tested. To compare their properties, a dynamic impact hardness test based on the impact of steel balls, with several diameters, and drop heights was developed. Accordingly, 120 solid wood flooring specimens and 120 engineering wood flooring specimens were producing with these four hardwood species. Dynamic impact tests were made with three steel balls of different diameters (30–40–50 mm), and they were carried out from five different drop heights (0.60–0.75–0.90–1.05–1.20 m). The impact of the steel ball drew the size of the footprint on the surface and this mark was measured with a digital caliper for both dimensions, diameter and depth, as footprint diameter (FD) and indentation depth (ID). Data from 3000 samples, corresponding to 120 different individual groups (4 species × 3 ball diameters × 5 drop height × 2 floor type) were analyzed. Results indicated that the variability of ID (CV between 19.25–25.61%) is much greater than the values achieved for FD (CV between 6.72–7.91%). Regarding the fast-growing hardwood species tested, E. globulus showed a similar behavior to traditional hardwood applied on wood flooring in Europe, Q. robur, and it could be a promising growth in the flooring industry. However, E. grandis showed the worst values compared to traditional hardwood in all test configurations.

Description: Despite many studies reporting hemispheric asymmetry in the representation and processing of emotions, the essence of the asymmetry remains controversial. Brain network analysis based on electroencephalography (EEG) is a useful biological method to study brain function. Here, EEG data were recorded while participants watched different emotional videos. According to the videos’ emotional categories, the data were divided into four categories: high arousal high valence (HAHV), low arousal high valence (LAHV), low arousal low valence (LALV) and high arousal low valence (HALV). The phase lag index as a connectivity index was calculated in theta (4–7 Hz), alpha (8–13 Hz), beta (14–30 Hz) and gamma (31–45 Hz) bands. Hemispheric networks were constructed for each trial, and graph theory was applied to quantify the hemispheric networks’ topological properties. Statistical analyses showed significant topological differences in the gamma band. The left hemispheric network showed significantly higher clustering coefficient (Cp), global efficiency (Eg) and local efficiency (Eloc) and lower characteristic path length (Lp) under HAHV emotion. The right hemispheric network showed significantly higher Cp and Eloc and lower Lp under HALV emotion. The results showed that the left hemisphere was dominant for HAHV emotion, while the right hemisphere was dominant for HALV emotion. The research revealed the relationship between emotion and hemispheric asymmetry from the perspective of brain networks.

Description: Surface all-wave net radiation (Rn) is a crucial variable driving many terrestrial latent heat (LE) models that estimate global LE. However, the differences between different Rn products and their impact on global LE estimates still remain unclear. In this study, we evaluated two Rn products, Global LAnd Surface Satellite (GLASS) beta version Rn and Modern-Era Retrospective Analysis for Research and Applications-version 2 (MERRA-2) Rn, from 2007–2017 using ground-measured data from 240 globally distributed in-situ radiation measurements provided by FLUXNET projects. The GLASS Rn product had higher accuracy (R2 increased by 0.04–0.26, and RMSE decreased by 2–13.3 W/m2) than the MERRA-2 Rn product for all land cover types on a daily scale, and the two Rn products differed greatly in spatial distribution and variations. We then determined the resulting discrepancies in simulated annual global LE using a simple averaging model by merging five diagnostic LE models: RS-PM model, SW model, PT-JPL model, MS-PT model, and SIM model. The validation results showed that the estimated LE from the GLASS Rn had higher accuracy (R2 increased by 0.04–0.14, and RMSE decreased by 3–8.4 W/m2) than that from the MERRA-2 Rn for different land cover types at daily scale. Importantly, the mean annual global terrestrial LE from GLASS Rn was 2.1% lower than that from the MERRA-2 Rn. Our study showed that large differences in satellite and reanalysis Rn products could lead to substantial uncertainties in estimating global terrestrial LE.

Description: The aim of the study was to evaluate the changes in glomalin-related soil proteins (GRSP) content, microbial diversity and soil physical quality depending on the type of soil measures of soil improvement and changes in soil health. The study was based on a 100-year stationary field microplot experiment where the soil profiles were collected with preserving the natural soil horizons. The microplot experiment was carried out on eight different soil types: Brunic Arenosol (Dystric I), Rendzic Leptosol, Fluvic Cambisol, Haplic Cambisol (Eutric), Gleyic Phaeozem, Brunic Arenosol (Dystric II), Haplic Cambisol (Eutric II) and Haplic Cambisol (Dystric). These soils are the most common types of agricultural soils in Poland. Relatively significant correlations with the soil quality, physical parameters and the glomalin-related soil proteins have been found. The study determined the total GRSP (T-GRSP) and easily extractable GRSP (EE-GRSP) levels in soils as well as the soil physical quality index and soil’s microbial biodiversity. The GRSP depended on the type of soil and correlated with S-Index and also was responsible for the unique chemical and physical properties of soils. Soils characterized by the highest T-GRSP content belonged to the group of very good and good soil physical quality characterized also by high biological activity, for which there were strong correlations with such parameters as dehydrogenase activity (DHA), microbial biomass content (MBC), microbial nitrogen content (MBN) and total bacteria number (B). The highest T-GRSP content and higher microbial diversity were found in Gleyic Phaeozem, Rendzic Leptosol and Fluvic Cambisol. The T-GRSP and EE-GRSP content were additionally correlated with the number of AMF spores. Very poor and poor soil physical quality according to S-Index characterized Brunic Arenosol (Dystric I) and Haplic Cambisol (Dystric). This research indicates that a specific edaphone of soil microorganisms and GRSP content may be of great importance when assessing a soil’s quality and improvements in soil health. The abundance of glomalin-producing fungi significantly affects the quality of the soil. This effect is particularly important for agricultural soils are threatened by ongoing land degradation.

Description: In recent years, there has been increasing interest in the development of micron-scale devices utilizing thermal gradients to manipulate molecules and colloids, and to measure their thermophoretic properties quantitatively. Various devices have been realized, such as on-chip implements, micro-thermogravitational columns and other micron-scale thermophoretic cells. The advantage of the miniaturized devices lies in the reduced sample volume. Often, a direct observation of particles using various microscopic techniques is possible. On the other hand, the small dimensions lead to some technical problems, such as a precise temperature measurement on small length scale with high spatial resolution. In this review, we will focus on the “state of the art” thermophoretic micron-scale devices, covering various aspects such as generating temperature gradients, temperature measurement, and the analysis of the current micron-scale devices. We want to give researchers an orientation for their development of thermophoretic micron-scale devices for biological, chemical, analytical, and medical applications.

Description: Detection of terrain features (ridges, spurs, cliffs, and peaks) is a basic research topic in digital elevation model (DEM) analysis and is essential for learning about factors that influence terrain surfaces, such as geologic structures and geomorphologic processes. Detection of terrain features based on general geomorphometry is challenging and has a high degree of uncertainty, mostly due to a variety of controlling factors on surface evolution in different regions. Currently, there are different computational techniques for obtaining detailed information about terrain features using DEM analysis. One of the most common techniques is numerically identifying or classifying terrain elements where regional topologies of the land surface are constructed by using DEMs or by combining derivatives of DEM. The main drawbacks of these techniques are that they cannot differentiate between ridges, spurs, and cliffs, or result in a high degree of false positives when detecting spur lines. In this paper, we propose a new method for automatically detecting terrain features such as ridges, spurs, cliffs, and peaks, using shaded relief by controlling altitude and azimuth of illumination sources on both smooth and rough surfaces. In our proposed method, we use edge detection filters based on azimuth angle on shaded relief to identify specific terrain features. Results show that the proposed method performs similar to or in some cases better (when detecting spurs than current terrain features detection methods, such as geomorphon, curvature, and probabilistic methods.

Description: The shipborne high-frequency surface wave radar (HFSWR) platform produces six degrees of freedom (DOF) motion at sea, which affects the performance of radar target detection and remote sensing of ocean surface dynamics parameters. Motion compensation can mitigate the effect of six-DOF motion, but motion parameters (including amplitude and angular frequency) need to be known. Motion parameters obtained by using high precision sensors are affected by the precision error and time delay, thus affecting the effect of motion compensation. To obtain the motion parameters accurately and in real time, a method of identifying the motion parameters by using an artificially transmitted reference radio frequency (RF) signal generated at the shore is proposed. Based on the results of the parameter identification, the reference RF signal and the first-order radar cross-sections (RCSs) modulated by six-DOF motion of the shipborne HFSWR platform can be compensated. The identification of angular frequency is divided into two steps: (1) Preliminary identification results are obtained by using the reference RF signal; (2) the pattern search method is used to further improve the identification accuracy of angular frequency. The amplitude of translation (including surge and sway) can be identified accurately through the reference RF signal. Due to the small amplitude of rotation (including roll, pitch, and yaw), it needs to be identified by the reference RF signal and pattern search method. After identifying the motion parameters, division in the time domain is used for motion compensation. Through the simulation results, both translation and rotation have good motion compensation effects. In addition, the method of using high precision sensors to obtain motion parameters and compensation is compared with the method in this paper, the simulation results of motion compensation show that the latter is better.

Description: The information of building types is highly needed for urban planning and management, especially in high resolution building modeling in which buildings are the basic spatial unit. However, in many parts of the world, this information is still missing. In this paper, we proposed a framework to derive the information of building type using geospatial data, including point-of-interest (POI) data, building footprints, land use polygons, and roads, from Gaode and Baidu Maps. First, we used natural language processing (NLP)-based approaches (i.e., text similarity measurement and topic modeling) to automatically reclassify POI categories into which can be used to directly infer building types. Second, based on the relationship between building footprints and POIs, we identified building types using two indicators of type ratio and area ratio. The proposed framework was tested using over 440,000 building footprints in Beijing, China. Our NLP-based approaches and building type identification methods show overall accuracies of 89.0% and 78.2%, and kappa coefficient of 0.83 and 0.71, respectively. The proposed framework is transferrable to other China cities for deriving the information of building types from web mapping platforms. The data products generated from this study are of great use for quantitative urban studies at the building level.

Description: In order to maximize energy efficiency in heterogeneous networks (HetNets), a turbo Q-Learning (TQL) combined with multistage decision process and tabular Q-Learning is proposed to optimize the resource configuration. For the large dimensions of action space, the problem of energy efficiency optimization is designed as a multistage decision process in this paper, according to the resource allocation of optimization objectives, the initial problem is divided into several subproblems which are solved by tabular Q-Learning, and the traditional exponential increasing size of action space is decomposed into linear increase. By iterating the solutions of subproblems, the initial problem is solved. The simple stability analysis of the algorithm is given in this paper. As to the large dimension of state space, we use a deep neural network (DNN) to classify states where the optimization policy of novel Q-Learning is set to label samples. Thus far, the dimensions of action and state space have been solved. The simulation results show that our approach is convergent, improves the convergence speed by 60% while maintaining almost the same energy efficiency and having the characteristics of system adjustment.

Description: X-ray photon correlation spectroscopy accesses a wide variety of dynamic phenomena at the nanoscale by studying the temporal correlations among photons that are scattered by a material in dynamical equilibrium when it is illuminated with a coherent X-ray beam. The information that is obtained is averaged over the illuminated area, which is generally of the order of several square microns. We propose here that more local information can be obtained by using nanobeams with great potential for the study of heterogeneous systems and show the feasibility of this approach with the support of numerical simulations.

Description: Eucalyptus grandis and E. dunnii have high productive potential in the South of Brazil, Uruguay, and central Argentina. This is based on the similarity of the climate and soil of these areas, which form an eco-region called Campos. However, previous results show that these species have differences in their distribution caused by the prioritization of Uruguayan soils for forestry, explained by the particular conditions of each site. In this study, the site variables (climate, soil, and topography) that better explain the distribution of both species were identified, and prediction models of current and future distribution were adjusted for different climate change scenarios (years 2050 and 2070). The distribution of E. grandis was associated with soil parameters, whereas for E. dunnii a greater effect of the climatic variables was observed. The ensemble biomod2 model was the most precise with regard to predicting the habitat for both species with respect to the simple models evaluated. For E. dunnii, the average values of the AUC, Kappa, and TSS index were 0.98, 0.88, and 0.77, respectively. For E. grandis, their values were 0.97, 0.86, and 0.80, respectively. In the projections of climatic change, the distribution of E. grandis occurrence remains practically unchanged, even in the scenarios of temperature increase. However, current distribution of E. dunnii shows high susceptibility in a scenario of increased temperature, to the point that most of the area currently planted may be at risk. Our results might be useful to political government and foresters for decision making in terms of future planted areas.

Description: Landscape connectivity is increasingly promoted as a conservation tool to combat the negative effects of habitat loss, fragmentation, and climate change. Given its importance as a key conservation strategy, connectivity science is a rapidly growing discipline. However, most landscape connectivity models consider connectivity for only a single snapshot in time, despite the widespread recognition that landscapes and ecological processes are dynamic. In this paper, we discuss the emergence of dynamic connectivity and the importance of including dynamism in connectivity models and assessments. We outline dynamic processes for both structural and functional connectivity at multiple spatiotemporal scales and provide examples of modeling approaches at each of these scales. We highlight the unique challenges that accompany the adoption of dynamic connectivity for conservation management and planning in the context of traditional conservation prioritization approaches. With the increased availability of time series and species movement data, computational capacity, and an expanding number of empirical examples in the literature, incorporating dynamic processes into connectivity models is more feasible than ever. Here, we articulate how dynamism is an intrinsic component of connectivity and integral to the future of connectivity science.

Description: Despite the potential implications of a cropland canopy water content (CCWC) thematic product, no global remotely sensed CCWC product is currently generated. The successful launch of the Landsat-8 Operational Land Imager (OLI) in 2012, Sentinel-2A Multispectral Instrument (MSI) in 2015, followed by Sentinel-2B in 2017, make possible the opportunity for CCWC estimation at a spatial and temporal scale that can meet the demands of potential operational users. In this study, we designed and tested a novel radiative transfer model (RTM) inversion technique to combine multiple sources of a priori data in a look-up table (LUT) for inverting the NASA Harmonized Landsat Sentinel-2 (HLS) product for CCWC estimation. This study directly builds on previous research for testing the constraint of the leaf parameter (Ns) in PROSPECT, by applying those constraints in PRO4SAIL in an agricultural setting where the variability of canopy parameters are relatively minimal. In total, 225 independent leaf measurements were used to train the LUTs, and 102 field data points were collected over the 2015–2017 growing seasons for validating the inversions. The results confirm increasing a priori information and regularization yielded the best performance for CCWC estimation. Despite the relatively low variable canopy conditions, the inclusion of Ns constraints did not improve the LUT inversion. Finally, the inversion of Sentinel-2 data outperformed the inversion of Landsat-8 in the HLS product. The method demonstrated ability for HLS inversion for CCWC estimation, resulting in the first HLS-based CCWC product generated through RTM inversion.

Description: The technological growth and accessibility of Unoccupied Aerial Systems (UAS) have revolutionized the way geographic data are collected. Digital Surface Models (DSMs) are an integral component of geospatial analyses and are now easily produced at a high resolution from UAS images and photogrammetric software. Systematic testing is required to understand the strengths and weaknesses of DSMs produced from various UAS. Thus, in this study, we used photogrammetry to create DSMs using four UAS (DJI Inspire 1, DJI Phantom 4 Pro, DJI Mavic Pro, and DJI Matrice 210) to test the overall accuracy of DSM outputs across a mixed land cover study area. The accuracy and spatial variability of these DSMs were determined by comparing them to (1) 12 high-precision GPS targets (checkpoints) in the field, and (2) a DSM created from Light Detection and Ranging (LiDAR) (Velodyne VLP-16 Puck Lite) on a fifth UAS, a DJI Matrice 600 Pro. Data were collected on July 20, 2018 over a site with mixed land cover near Middleton, NS, Canada. The study site comprised an area of eight hectares (~20 acres) with land cover types including forest, vines, dirt road, bare soil, long grass, and mowed grass. The LiDAR point cloud was used to create a 0.10 m DSM which had an overall Root Mean Square Error (RMSE) accuracy of ±0.04 m compared to 12 checkpoints spread throughout the study area. UAS were flown three times each and DSMs were created with the use of Ground Control Points (GCPs), also at 0.10 m resolution. The overall RMSE values of UAS DSMs ranged from ±0.03 to ±0.06 m compared to 12 checkpoints. Next, DSMs of Difference (DoDs) compared UAS DSMs to the LiDAR DSM, with results ranging from ±1.97 m to ±2.09 m overall. Upon further investigation over respective land covers, high discrepancies occurred over vegetated terrain and in areas outside the extent of GCPs. This indicated LiDAR’s superiority in mapping complex vegetation surfaces and stressed the importance of a complete GCP network spanning the entirety of the study area. While UAS DSMs and LiDAR DSM were of comparable high quality when evaluated based on checkpoints, further examination of the DoDs exposed critical discrepancies across the study site, namely in vegetated areas. Each of the four test UAS performed consistently well, with P4P as the clear front runner in overall ranking.

Description: Although compacted soil can be recovered through root development of planted seedlings, the relationship between root morphologies and soil physical properties remain unclear. We investigated the impacts of soil compaction on planted hybrid larch F1 (Larix gmelinii var. japonica×L. kaempferi, hereafter F1) seedlings with/without N loading. We assumed that N loading might increase the fine root proportion of F1 seedlings under soil compaction, resulting in less effects of root development on soil recovery. We established experimental site with different levels of soil compaction and N loading, where two-year-old F1 seedlings were planted. We used a hardness change index (HCI) to quantify a degree of soil hardness change at each depth. We evaluated root morphological responses to soil compaction and N loading, focusing on ectomycorrhizal symbiosis. High soil hardness reduced the total dry mass of F1 seedlings by more than 30%. Significant positive correlations were found between HCI and root proportion, which indicated that F1 seedling could enhance soil recovery via root development. The reduction of fine root density and its proportion due to soil compaction was observed, while these responses were contrasting under N loading. Nevertheless, the relationships between HCI and root proportion were not changed by N loading. The relative abundance of the larch-specific ectomycorrhizal fungi under soil compaction was increased by N loading. We concluded that the root development of F1 seedling accelerates soil recovery, where N loading could induce root morphological changes under soil compaction, resulting in the persistent relationship between root development and soil recovery.

Description: Leaf rust (LR) and stem rust (SR) pose serious challenges to wheat production in Kazakhstan. In recent years, the susceptibility of local wheat cultivars has substantially decreased grain yield and quality. Therefore, local breeding projects must be adjusted toward the improvement of LR and SR disease resistances, including genetic approaches. In this study, a spring wheat segregating population of Pamyati Azieva (PA) × Paragon (Par), consisting of 98 recombinant inbred lines (RILs), was analyzed for the resistance to LR and SR at the seedling and adult plant-growth stages. In total, 24 quantitative trait loci (QTLs) for resistance to rust diseases at the seedling and adult plant stages were identified, including 11 QTLs for LR and 13 QTLs for SR resistances. Fourteen QTLs were in similar locations to QTLs and major genes detected in previous linkage mapping and genome-wide association studies. The remaining 10 QTLs are potentially new genetic factors for LR and SR resistance in wheat. Overall, the QTLs revealed in this study may play an important role in the improvement of wheat resistance to LR and SR per the marker-assisted selection approach.

Description: Radar images suffer from the impact of sidelobes. Several sidelobe-suppressing methods including the convolutional neural network (CNN)-based one has been proposed. However, the point spread function (PSF) in the radar images is sometimes spatially variant and affects the performance of the CNN. We propose the spatial-variant convolutional neural network (SV-CNN) aimed at this problem. It will also perform well in other conditions when there are spatially variant features. The convolutional kernels of the CNN can detect motifs with some distinctive features and are invariant to the local position of the motifs. This makes the convolutional neural networks widely used in image processing fields such as image recognition, handwriting recognition, image super-resolution, and semantic segmentation. They also perform well in radar image enhancement. However, the local position invariant character might not be good for radar image enhancement, when features of motifs (also known as the point spread function in the radar imaging field) vary with the positions. In this paper, we proposed an SV-CNN with spatial-variant convolution kernels (SV-CK). Its function is illustrated through a special application of enhancing the radar images. After being trained using radar images with position-codings as the samples, the SV-CNN can enhance the radar images. Because the SV-CNN reads information of the local position contained in the position-coding, it performs better than the conventional CNN. The advance of the proposed SV-CNN is tested using both simulated and real radar images.

Description: Chili pepper (Capsicum spp.) is one of the most economically important horticultural crops in the world; its production for the food and pharmaceutical industries has been increasing worldwide. The economic importance of this crop is due, in part, to the nutraceutical properties derived from its secondary metabolism. Drought is the main environmental factor that affects crop production. Nevertheless, studies involving water deficit have considered short-term responses to sharp water deficit rather than long-term acclimation processes through moderate and gradually increasing water deficits, which omitted the dynamics and profile of the secondary metabolism that are part of the plant’s defence system against this stress factor. The present study aimed to identify the different mechanisms that chili pepper plants use to cope with drought stress using a progressive decrease and increase of water availability, conditions that commonly occur for crops in open fields. Four treatments were applied as follows: gradual water deficit (GWD), initial waterlogging with gradual water deficit (IWGD), sudden water deficit with gradual recovery (SWDR), and no deficit of water (NDW). These conditions should represent a more real situation similar to that faced by plants in the agricultural environment. In order to evaluate the response mechanisms associated with these water deficits, changes in phenological variables, proline accumulation, and the gene expression of phenylalanine ammonia-lyase (PAL), chalcone synthase (CHS), peroxidase (POD), and superoxide dismutase (SOD) were measured in chili pepper plants growing on land under different irrigation regimes in two contrasting soil types in areas where chili pepper plants are cultivated in central Mexico. The variables evaluated showed a differentiated response of the mechanisms in plants growing under different levels of water deficit. Given the differential response observed for the gene expression and morphological and biochemical variables studied in chili pepper plants against different water regimes, in this work, this may have implications for more efficient use of water in crops with high nutraceutical content, in addition to prospects for using products derived from secondary metabolism in the pharmaceutical industry.

Description: Climate change has the potential to disrupt ecosystem services and further exacerbate the effects of human activities on natural resources. This has significant implications for educational institutions and the populations they serve. As the current crop of landscape architecture students struggles to define its role within the climate crisis and its related social and political underpinnings, a core mission of colleges and universities moving forward should be to provide students with applied knowledge about how climate change affects the landscape. This goes beyond coursework in climate science or policy; for landscape architecture students to be leaders in the response to climate change, they need applied, practical skills. An ever-growing body of the literature focuses on landscape design strategies for climate change adaptation; however, few frameworks integrate these strategies with the hands-on experience students will need to face real-world challenges after graduation. Educational institutions have the potential to utilize their campuses as demonstration sites for applied ecosystem research programs and actively engage students with the design, implementation, politics, and ongoing stewardship of these landscapes. This paper uses a case study methodology to understand how experiential and public-engaged learning pedagogies contribute to student preparedness to address climate change. It examines three cases of engaged learning at the University of California, Davis campus and attributes their impact to intentional connections with research, to the delegation of responsibility; to the openness of spaces for experimentation, and to self-reflection that connects climate with everyday behavior. By promoting experiential learning programs that require students to actively use their heads and their hands to construct and sustainably manage their own campus landscapes, service-learning studios and internships can provide opportunities for students to address the real scenarios of climate crisis and resilience.

Description: Vanadium dioxide (VO2), due to its electrically induced metal-to-insulator transition with dramatic changes in electrical and optical properties, is considered to be a powerful material for electro-optical devices. However, there are still some controversies about phase transition mechanism under voltage. Here, based on optical characterizations on VO2 crystal nanofilm during the whole process of phase transition, temporal evolution and spatial distribution of changes in electricity, optic and temperature are investigated simultaneously, to explore the mechanism. The variations of Raman spectrum and reflected spectrum, and changes in current and temperature are evidences for occurrence of phase transition, which exhibit different changing behaviors with time and space. These results offer a better understanding of the phase transition mechanism, implying that lattice structure of VO2 changes gradually after applying voltage until the structure is completely converted to metallic structure, which causes a rapid increase in carrier density, resulting in a rapid change in current, reflected spectrum and temperature. Temperature rise before phase transition and applied electric field alone are not enough for triggering metal-insulator transition, but these two factors can act synergistically on structural transformation to induce phase transition.

Description: Recent studies suggest that real-time auditory feedback is an effective method to facilitate motor learning. The evaluation of the parameter mapping (sound-to-movement mapping) is a crucial, yet frequently neglected step in the development of audio feedback. We therefore conducted two experiments to evaluate audio parameters with target finding exercises designed for balance training. In the first experiment with ten participants, five different audio parameters were evaluated on the X-axis (mediolateral movement). Following that, in a larger experiment with twenty participants in a two-dimensional plane (mediolateral and anterior-posterior movement), a basic and synthetic audio model was compared to a more complex audio model with musical characteristics. Participants were able to orient themselves and find the targets with the audio models. In the one-dimensional condition of experiment one, percussion sounds and synthetic sound wavering were the overall most effective audio parameters. In experiment two, the synthetic model was more effective and better evaluated by the participants. In general, basic sounds were more helpful than complex (musical) sound models. Musical abilities and age were correlated with certain exercise scores. Audio feedback is a promising approach for balance training and should be evaluated with patients. Preliminary evaluation of the respective parameter mapping is highly advisable.

Description: In this paper we document the design, development, results, performance and field applications of a compact directive transmit antenna for the long-range High Frequency ocean RADAR (HFR) systems operating in the International Telecommunication Union (ITU) designated 4MHz and 5MHz radiodetermination bands. The antenna design is based on the combination of the concepts of an electrically small loop with that of travelling wave antenna. This has the effect of inducing a radiated wave predominantly in a direction opposed to that of energy flow on the antenna structures. We demonstrate here that travelling wave design allows for a more compact antenna than other directive options, it has straightforward feed-point matching arrangements, and a flat frequency and phase response over an entire radiodetermination band. In situ measurements of the antenna radiation pattern, obtained with the aid of a drone, correlate well with those obtained from simulations, and show between 8dB and 30dB front-to-back suppression, with a 3dB beam width in the forward lobe of 100∘ or more. The broad-beam radiation pattern ensures proper illumination over the ocean and the significant front-to-back suppression guarantees reduced interference to terrestrial services. The proposed antenna design is compact and straight forward and can be easily deployed by minimal modifications of an existing transmission antenna. The design may be readily adapted to different environments due to the relative insensitivity of its radiation pattern and frequency response to geometric detail. The only downside to these antennas is their relatively low radiation efficiency which, however, may easily be compensated for by the available power output of a typical HFR transmitter. Antennas based on this design are currently deployed at the SeaSonde HFR sites in New South Wales, Australia, with operational ranges up to 200 km offshore despite their low radiating efficiency and the extremely low output power in use at these installations. Due to their directional pattern, it is also planned to test these antennas in phased-array Wellen RADAR (WERA) systems in both the standard receive arrays: where in-band radio frequency noise of terrestrial origin is impacting on data quality, and in the transmit array: to possibly simplify splitting, phasing and tuning requirements.

Description: Supraglacial liquid water at the margins of ice sheets has an important impact on the surface energy balance and can also influence the ice flow when supraglacial lakes drain to the bed. Optical imagery is able to monitor supraglacial lakes during the summer season. Here we developed an alternative method using polarimetric SAR from Sentinel-1 during 2017–2020 to distinguish between liquid water and other surface types at the margin of the Northeast Greenland Ice Stream. This allows the supraglacial hydrology to be monitored during the winter months too. We found that the majority of supraglacial lakes persist over winter. When comparing our results to optical data, we found significantly more water. Even during summer, many lakes are partly or fully covered by a lid of ice and snow. We used our classification results to automatically map the outlines of supraglacial lakes, create time series of water area for each lake, and hence detect drainage events. We even found several winter time drainages, which might have an important effect on ice flow. Our method has problems during the peak of the melt season, but for the rest of the year it provides crucial information for better understanding the component of supraglacial hydrology in the glaciological system.

Description: Based on the conceptual basis of information theory, we propose a novel mutual information measure—‘path-based mutual information’. This information measure results from the representation of a set of random variables as a probabilistic graphical model. The edges in this graph are modeled as discrete memoryless communication channels, that is, the underlying data is ergodic, stationary, and the Markov condition is assumed to be applicable. The associated multilinear stochastic maps, tensors, transform source probability mass functions into destination probability mass functions. This allows for an exact expression of the resulting tensor of a cascade of discrete memoryless communication channels in terms of the tensors of the constituting communication channels in the paths. The resulting path-based information measure gives rise to intuitive, non-negative, and additive path-based information components—redundant, unique, and synergistic information—as proposed by Williams and Beer. The path-based redundancy satisfies the axioms postulated by Williams and Beer, the identity axiom postulated by Harder, and the left monotonicity axiom postulated Bertschinger. The ordering relations between redundancies of different joint collections of sources, as captured in the redundancy lattices of Williams and Beer, follow from the data processing inequality. Although negative information components can arise, we speculate that these either result from unobserved variables, or from adding additional sources that are statistically independent from all other sources to a system containing only non-negative information components. This path-based approach illustrates that information theory provides the concepts and measures for a partial information decomposition.

Description: To investigate the effect of wave-induced mixing on the upper ocean structure, especially under typhoon conditions, an ocean-wave coupled model is used in this study. Two physical processes, wave-induced turbulence mixing and wave transport flux residue, are introduced. We select tropical cyclone (TC) Nepartak in the Northwest Pacific ocean as a TC example. The results show that during the TC period, the wave-induced turbulence mixing effectively increases the cooling area and cooling amplitude of the sea surface temperature (SST). The wave transport flux residue plays a positive role in reproducing the distribution of the SST cooling area. From the intercomparisons among experiments, it is also found that the wave-induced turbulence mixing has an important effect on the formation of mixed layer depth (MLD). The simulated maximum MLD is increased to 54 m and is only 1 m less than the observed value. The wave transport flux residue shows a dominant role in the mixed layer temperature (MLT) changing. The mean error of the MLT is reduced by 0.19 °C compared with the control experiment without wave mixing effects. The study shows that the effect of wave mixing should be included in the upper ocean structure modeling.

Description: In this paper, we propose an adaptive entropy model (AEM), which incorporates the entropy measurement and the adaptability into the conventional Markowitz’s mean-variance model (MVM). We evaluate the performance of AEM, based on several portfolio performance indicators using the five-year Shanghai Stock Exchange 50 (SSE50) index constituent stocks data set. Our outcomes show, compared with the traditional portfolio selection model, that AEM tends to make our investments more decentralized and hence helps to neutralize unsystematic risks. Due to the existence of self-adaptation, AEM turns out to be more adaptable to market fluctuations and helps to maintain the balance between the decentralized and concentrated investments in order to meet investors’ expectations. Our model applies equally well to portfolio optimizations for other financial markets.

Description: We evaluated surface-based analysis for assessing the possible relationship between the microstructural properties and particulate matter (i.e., two size fractions of PM2.5 and PM10) adsorption efficiencies of their leaf surfaces on ten woody species. We focused on the effect of PM adsorption capacity between micro-morphological features on leaf surfaces using a scanning electron microscope and a non-contact surface profiler as an example. The species with higher adsorption of PM10 on leaf surfaces were Korean boxwood (Buxus koreana Nakai ex Chung & al.) and evergreen spindle (Euonymus japonicus Thunb.), followed by yulan magnolia (Magnolia denudata Desr.), Japanese yew (Taxus cuspidata Siebold & Zucc.), Japanese horse chestnut (Aesculus turbinata Blume), retusa fringetree (Chionanthus retusus Lindl. & Paxton), maidenhair tree (Ginkgo biloba L.), and royal azalea (Rhododendron schlippenbachii Maxim.). There was a higher capacity for the adsorption of PM2.5 on the leaf surfaces of B. koreana and T. cuspidata, followed by A. turbinata, C. retusus, E. japonicus, G. biloba, and M. denudata. In wax layer tests, T. cuspidata, A. turbinata, R. schlippenbachii, and C. retusus showed a statistically higher PM2.5 capturing capacity than the other species. Different types of trichomes were distributed on the adaxial and abaxial leaves of A. turbinata, C. retusus, M. denudata, pagoda tree (Styphnolobium japonicum (L.) Schott), B. koreana, and R. schlippenbachii; however, these trichomes were absent on both sides of the leaves of G. biloba, tuliptree (Liriodendron tulipifera L.), E. japonicus, and T. cuspidata. Importantly, leaf surfaces of G. biloba and S. japonicum with dense or thick epicuticular leaf waxes and deeper roughness revealed lower PM adsorption. Based on the overall performance of airborne PM capture efficiency, evergreen species such as B. koreana, T. cuspidata, and E. japonicus showed the best results, whereas S. japonicum and L. tulipifera had the lowest capture. In particular, evergreen shrub species showed higher PM2.5 depositions inside the inner wall of stomata or the periphery of guard cells. Therefore, in leaf microstructural factors, stomatal size may be related to notably high PM2.5 holding capacities on leaf surfaces, but stomatal density, trichome density, and roughness had a limited effect on PM adsorption. Finally, our findings indicate that surface-based microstructures are necessarily not a correlation for corresponding estimates with leaf PM adsorption.

Description: The current techniques used for monitoring the blasting process in open pit mines are manual, intermittent and inefficient and can expose technical manpower to hazardous conditions. This study presents the application of unmanned aerial vehicle (UAV) systems for monitoring and improving the blasting process in open pit mines. Field experiments were conducted in different open pit mines to assess rock fragmentation, blast-induced damage on final pit walls, blast dynamics and the accuracy of blastholes including production and pre-split holes. The UAV-based monitoring was done in three different stages, including pre-blasting, blasting and post-blasting. In the pre-blasting stage, pit walls were mapped to collect structural data to predict in situ block size distribution and to develop as-built pit wall digital elevation models (DEM) to assess blast-induced damage. This was followed by mapping the production blasthole patterns implemented in the mine to investigate drillhole alignment. To monitor the blasting process, a high-speed camera was mounted on the UAV to investigate blast initiation, sequencing, misfired holes and stemming ejection. In the post-blast stage, the blasted rock pile (muck pile) was monitored to estimate fragmentation and assess muck pile configuration, heave and throw. The collected aerial data provide detailed information and high spatial and temporal resolution on the quality of the blasting process and significant opportunities for process improvement. The current challenges with regards to the application of UAVs for blasting process monitoring are discussed, and recommendations for obtaining the most value out of an UAV application are provided.

Description: The aim of this paper is to provide the geometrical structure of a gravitational field that includes the addition of dark matter in the framework of a Riemannian and a Riemann–Sasaki spacetime. By means of the classical Riemannian geometric methods we arrive at modified geodesic equations, tidal forces, and Einstein and Raychaudhuri equations to account for extra dark gravity. We further examine an application of this approach in cosmology. Moreover, a possible extension of this model on the tangent bundle is studied in order to examine the behavior of dark matter in a unified geometric model of gravity with more degrees of freedom. Particular emphasis shall be laid on the problem of the geodesic motion under the influence of dark matter.

Description: Quantum turbulence deals with the phenomenon of turbulence in quantum fluids, such as superfluid helium and trapped Bose-Einstein condensates (BECs). Although much progress has been made in understanding quantum turbulence, several fundamental questions remain to be answered. In this work, we investigated the entropy of a trapped BEC in several regimes, including equilibrium, small excitations, the onset of turbulence, and a turbulent state. We considered the time evolution when the system is perturbed and let to evolve after the external excitation is turned off. We derived an expression for the entropy consistent with the accessible experimental data, which is, using the assumption that the momentum distribution is well-known. We related the excitation amplitude to different stages of the perturbed system, and we found distinct features of the entropy in each of them. In particular, we observed a sudden increase in the entropy following the establishment of a particle cascade. We argue that entropy and related quantities can be used to investigate and characterize quantum turbulence.

Description: In a general Markov decision progress system, only one agent’s learning evolution is considered. However, considering the learning evolution of a single agent in many problems has some limitations, more and more applications involve multi-agent. There are two types of cooperation, game environment among multi-agent. Therefore, this paper introduces a Cooperation Markov Decision Process (CMDP) system with two agents, which is suitable for the learning evolution of cooperative decision between two agents. It is further found that the value function in the CMDP system also converges in the end, and the convergence value is independent of the choice of the value of the initial value function. This paper presents an algorithm for finding the optimal strategy pair (πk0,πk1) in the CMDP system, whose fundamental task is to find an optimal strategy pair and form an evolutionary system CMDP(πk0,πk1). Finally, an example is given to support the theoretical results.

Description: The most massive and fast-eroding thaw slump of the Northern Hemisphere located in the Yana Uplands of Northern Yakutia was investigated to assess in detail the cryogenic inventory and carbon pools of two distinctive Ice Complex stratigraphic units and the uppermost cover deposits. Differentiating into modern and Holocene near-surface layers (active layer and shielding layer), highest total carbon contents were found in the active layer (18.72 kg m−2), while the shielding layer yielded a much lower carbon content of 1.81 kg m−2. The late Pleistocene upper Ice Complex contained 10.34 kg m−2 total carbon, and the mid-Pleistocene lower Ice Complex 17.66 kg m−2. The proportion of organic carbon from total carbon content is well above 70% in all studied units with 94% in the active layer, 73% in the shielding layer, 83% in the upper Ice Complex and 79% in the lower Ice Complex. Inorganic carbon is low in the overall structure of the deposits.

Description: A method for estimation of the turbulent energy dissipation rate from measurements by a conically scanning pulsed coherent Doppler lidar (PCDL), with allowance for the wind transport of turbulent velocity fluctuations, has been developed. The method has been tested in comparative atmospheric experiments with a Stream Line PCDL (Halo Photonics, Brockamin, Worcester, United Kingdom) and a sonic anemometer. It has been demonstrated that the method provides unbiased estimates of the dissipation rate at arbitrarily large ratios of the mean wind velocity to the linear scanning speed.

Description: Pathological ECM remodelling and biomineralization in human aortic valve and bioprosthesis tissue were investigated by Fourier transformed infrared (FT-IR) spectroscopic imaging and multivariate data analysis. Results of histological von Kossa staining to monitor hydroxyapatite biomineralization correlated to the definition of mineralized tissue using FT-IR spectroscopic imaging. Spectra exhibit signals of carbonate and phosphate groups of hydroxyapatite. Proteins could be identified by the amide I and amide II bands. Proteins were detected in the calcified human aortic valve tissue, but no absorption signals of proteins were observed in the mineralized bioprosthesis sample region. A shift of the amide I band from 1654 cm−1 to 1636 cm−1 was assumed to result from β-sheet structures. This band shift was observed in regions where the mineralization process had been identified but also in non-mineralized bioprosthesis tissue independent of prior implantation. The increased occurrence of β-sheet conformation is hypothesized to be a promoter of the biomineralization process. FT-IR spectroscopic imaging offers a wealth of chemical information. For example, slight variations in band position and intensity allow investigation of heterogeneity across aortic valve tissue sections. The exact evaluation of these properties and correlation with conventional histological staining techniques give insights into aortic valve tissue remodelling and calcific pathogenesis.

Description: Pansharpening is a typical image fusion problem, which aims to produce a high resolution multispectral (HRMS) image by integrating a high spatial resolution panchromatic (PAN) image with a low spatial resolution multispectral (MS) image. Prior arts have used either component substitution (CS)-based methods or multiresolution analysis (MRA)-based methods for this propose. Although they are simple and easy to implement, they usually suffer from spatial or spectral distortions and could not fully exploit the spatial and/or spectral information existed in PAN and MS images. By considering their complementary performances and with the goal of combining their advantages, we propose a pansharpening weight network (PWNet) to adaptively average the fusion results obtained by different methods. The proposed PWNet works by learning adaptive weight maps for different CS-based and MRA-based methods through an end-to-end trainable neural network (NN). As a result, the proposed PWN inherits the data adaptability or flexibility of NN, while maintaining the advantages of traditional methods. Extensive experiments on data sets acquired by three different kinds of satellites demonstrate the superiority of the proposed PWNet and its competitiveness with the state-of-the-art methods.

Description: Organic amendments can reportedly sustain and increase lowland rice productivity in smallholder systems. Few studies have assessed locally-available substrates in hydrologically variable floodplain environments. We investigated the effects of green and farmyard manures on rice yields, and total soil C and N in the Kilombero floodplain, Tanzania. At both the fringe and the middle positions, five treatments were applied in 2016 and 2017, comprising (1) non-amended control, (2) farmyard manure, (3) pre-rice legumes, (4) post-rice legumes and (5) a combination of green and farmyard manures. Residual treatment effects were assessed in 2018 when rice plots were uniformly non-amended. Depending on the year and the position, organic amendments increased rice grain yields by 0.7–3.1 Mg ha–1 above the non-amended control. Sole green and farmyard manure applications had similar effects on grain yield, while a combination of green and farmyard manure led to a significant increase in grain yield above both the control and sole applications of organic amendments in both years. The contribution from biological N2 fixation by legumes ranged from 4 to 61 kg N ha–1. Despite partial N balances being mostly negative, we observed positive residual effects on the yield of the non-amended rice in the third year. Such effects reached up to 4 Mg ha−1 and were largest with post-rice legumes, sole or combined with farmyard manure. Irrespective of the position in the floodplain, manures significantly increased soil C and N contents after two years, hence enhancing soil fertility and resulting in increased rice grain yields. Comparable benefits may be obtained along the hydrological gradients of other large river floodplains of the region and beyond.

Description: The aim of this study was to analyse the genetic and phenotypic differentiation of bacteria isolated from root nodules of Trifolium rubens, a rare clover species. The symbiotic compatibility of selected isolates was investigated using two agronomically important plants, red clover (Trifolium pratense L.) and pea (Pisum sativum L.). A high genetic diversity of analysed strains was shown using the Enterobacterial Repetitive Intergenic Consensus Polymerase Chain Reaction (ERIC-PCR) method. Most of the strains showed a high similarity to R. leguminosarum in the 16S rRNA sequence. Two strains were identified as Agrobacterium spp. There was a strong positive correlation between fresh clover weight and the number of root nodules and a statistically significant increase in the number of the root nodules in selected strains compared to the negative control. Phenotypic tests and BIOLOG analysis showed the ability of the analysed strains to grow in different experimental conditions (pH = 6–10, 0.5–3% NaCl, different carbon and nitrogen sources), which makes them suitable for application as an agronomically important factor.

Description: Ecuador Andean purple corn (Zea mays L.) was subjected to a germination process at 15–40 °C for 24–168 incubation hours. Purple corn protein concentrates (PCPCs) were obtained by alkaline extraction at pH 8.0 and pH 10.0, followed by an isoelectric precipitation process at pH 4.0, pH 5.0 and pH 6.0. Proteins and phenolic content of PCPCs was calculated. PCPC antioxidant properties were determined by the ferric-reducing antioxidant power (FRAP) in vitro method and by the 2,2-azinobis, 3-ethyl-benzothiazoline-6-sulfonic acid, (ABTS) in vitro method. Andean purple corn seeds were able to germinate under the germination conditions tested in this study. The higher percentage of germination was of 63.33% at 168 h/25 °C. The PCPCs protein profile was characterized for the presence of six bands with molecular weights of 14.50 kDa, 20.12 kDa, 25.18 kDa, 41.85 kDa, 59.59 kDa, and 65.87 kDa. Germinated PCPC presented a high TPC content with ranges of 605.71–1820.00 mg gallic acid equivalents (GAE)/g PCPC dry weight (DW), germinated PCPC/72 h/25 °C presented a higher value of 1820.00 mg GAE/g PCPC, DW. All germinated PCPCs samples assayed presented strong antioxidant activity when measured by the ABTS and FRAP methods. Germinated PCPC/144 h/35 °C presented high antioxidant activity by ABTS with 804.35 µmol Trolox equivalents (TE)/g PCPC DW and germinated PCPC/144 h/30 °C presented a high value by the FRAP method, 987.83 µmol TE/g PCPC DW.

Description: Weedy rice is one of the most common weeds in rice cultivation in many rice areas throughout the world and it is able to cause significant yield reductions. Weedy rice is characterized by a high biological diversity that permits different populations to be identified on the basis of their morphological and physiological traits. This variability contributes to its success in different environments and allows different abiotic stresses, which are intensified by climate change, to be faced. Taller plants, enhanced tillering, seed shattering and the presence of red pericarp, variable hull coloration and awn morphology, linked to a deeper seed dormancy, are some of the traits that help weedy rice to spread in changing environments. The higher phenotypic plasticity and genetic variability of weedy rice make it more able to cope with temperature variations, intermittent water availability, soil salinity, drought conditions and increased CO2 concentrations than cultivated rice. As these abiotic stresses will become more frequent in the future, weedy rice competitiveness may be higher, with a spread of infestations. Thus, the control of weedy rice should be based on an integration of different preventive and agronomic techniques, a sensible use of herbicides and the use of suitable rice varieties.

Description: One of the main contributions of the Capital Assets Pricing Model (CAPM) to portfolio theory was to explain the correlation between assets through its relationship with the market index. According to this approach, the market index is expected to explain the co-movement between two different stocks to a great extent. In this paper, we try to verify this hypothesis using a sample of 3.000 stocks of the USA market (attending to liquidity, capitalization, and free float criteria) by using some functions inspired by cooperative dynamics in physical particle systems. We will show that all of the co-movement among the stocks is completely explained by the market, even without considering the market beta of the stocks.

Description: Digital Elevation Models (DEMs) are widely used as a proxy for bathymetric data and several studies have attempted to improve DEM accuracy for hydrodynamic (HD) modeling. Most of these studies attempted to quantitatively improve estimates of channel conveyance (assuming a non-braided morphology) rather than accounting for the actual channel planform. Accurate representation of river conveyance and planform in a DEM is critical to HD modeling and can be achieved with a combination of remote sensing (e.g., satellite image) and field data, such as water surface elevation (WSE). Therefore, the objectives of this study are (i) to develop an algorithm for predicting channel conveyance and characterizing planform via satellite images and in situ WSE and (ii) to estimate discharge using the predicted conveyance via an HD model. The algorithm is named River Bathymetry via Satellite Image Compilation (RiBaSIC) and uses Landsat satellite imagery, Shuttle Radar Topography Mission (SRTM) DEM, Multi-Error-Removed Improved-Terrain (MERIT) DEM, and observed WSE. The algorithm is tested on four study areas along the Willamette River, Kushiyara River, Jamuna River, and Solimoes River. Channel slope and predicted hydraulic radius are subsequently estimated for approximating Manning’s roughness factor. Two-dimensional HD models using DEMs modified by the RiBaSIC algorithm and corresponding Manning’s roughness factors are employed for discharge estimation. The proposed algorithm can represent river planform and conveyance in single-channeled, meandering, wandering, and braided river reaches. Additionally, the HD models estimated discharge within 14–19% relative root mean squared error (RRMSE) in simulation of five years period.

Description: Quantifying river discharge is a critical component for hydrological studies, floodplain ecological conservation research, and water resources management. In recent years, a series of remote sensing-based discharge estimation methods have been developed. An example is the use of the near infrared (NIR) band of optical satellite images, with the principle of calculating the ratio between a stable land pixel for calibration (C) and a pixel within the river for measurement (M), applying a linear regression between C/M series and observed discharge series. This study trialed the C/M method, utilizing the Harmonized Landsat and Sentinel-2 (HLS) surface reflectance product on relatively small rivers with 30~100 m widths. Two study sites with different river characteristics and geographic settings in the Murray-Darling Basin (MDB) of Australia were selected as case studies. Two independent sets of HLS data and gauged discharge data for the 2017 and 2018 water years were acquired for modeling and validation, respectively. Results reveal high consistency between the HLS-derived discharge and gauged discharge at both sites. The Relative Root Mean Square Errors are 53% and 19%, and the Nash-Sutcliffe Efficiency coefficients are 0.24 and 0.69 for the two sites. This study supports the effectiveness of applying the fine-resolution HLS for modeling discharge on small rivers based on the C/M methodology, which also provides evidence of using multisource synthesized datasets as the input for discharge estimation.

Description: Testing Fusarium resistance to ear rots in maize requires a well-supported methodology and tests for toxin responses. In this study, commercial hybrids were tested for resistance to Fusarium graminearum, Fusarium culmorum, and Fusarium verticillioides (kernel and silk channel), as well as their toxin response. One third of the hybrids tested showed a similar resistance or susceptibility to the three pathogens and their toxin response, but there is no proof for their genetic background being the same or different. The performance of the remaining hybrids was highly variable and supports the idea of different genetic regulation. The mean ear rot severity of the kernel resistance was doubled compared with the silk channel resistance data. The ear rot and toxin tests displayed significant positive correlations, verifying the decisive role of resistance in toxin regulation. Several hybrids, termed toxigenic hybrids, showed significant extra toxin production, indicating an additional food safety risk. The toothpick method gave more reliable results and a better differentiation of genotypes. The resistance to different Fusarium spp. in a specific growing region should be analyzed separately in independent resistance tests. Through this, the food safety risks could be better identified. Susceptible hybrids should not be used for commercial production.

Description: An evergreen scientific feature is the ability for scientific works to be reproduced. Since chaotic systems are so hard to understand analytically, numerical simulations assume a key role in their investigation. Such simulations have been considered as reproducible in many works. However, few studies have focused on the effects of the finite precision of computers on the simulation reproducibility of chaotic systems; moreover, code sharing and details on how to reproduce simulation results are not present in many investigations. In this work, a case study of reproducibility is presented in the simulation of a chaotic jerk circuit, using the software LTspice. We also employ the OSF platform to share the project associated with this paper. Tests performed with LTspice XVII on four different computers show the difficulties of simulation reproducibility by this software. We compare these results with experimental data using a normalised root mean square error in order to identify the computer with the highest prediction horizon. We also calculate the entropy of the signals to check differences among computer simulations and the practical experiment. The methodology developed is efficient in identifying the computer with better performance, which allows applying it to other cases in the literature. This investigation is fully described and available on the OSF platform.

Description: The study’s objective was to evaluate the influence of thinning on the quality and regularity of yield of ‘Regina’ cherries grown on a dwarf Gisela 5 rootstock. The experiments were conducted in the years 2009–2012 in Western Poland. Trees were thinned using a chemical agent, ammonium thiosulphate (ATS), at doses of 20 g ATS L−1, 30 g ATS L−1 and 40 g ATS L−1, and by hand, and the results of chemical and hand thinning were compared with those obtained for unthinned trees. The course of weather conditions in winter and during flowering had a significant impact on yield. Chemical thinning is known to be an effective method to regulate fruiting of pome trees, but it can also be successful if applied to cherry trees, as reflected by the alternate bearing index, which was the lowest after applying ATS at a dose of 40 g. ATS treatment improved fruit quality in full crop years. Thinning resulted in, among other things, larger and darker fruit and higher content of total soluble solids and titratable acidity. Treatment with 40 g ATS L−1 significantly stimulated the vegetative growth of trees.

Description: We report a new mixture, which is modified from Merck TL-216, for liquid-crystal-on-silicon spatial light modulators (SLMs). To achieve 2π phase change at λ = 633 nm with 5 V operation voltage, the measured response time is about 3 ms at 50 °C. Meanwhile, our mixture exhibits no sign of photodegradation and even the total dosage has exceeded 400 MJ/cm2 at a blue laser wavelength λ = 465 nm. In comparison, E7 died at about 30 MJ/cm2. Widespread applications of this material for high brightness SLMs, near-eye displays, and head-up displays are foreseeable.

Description: Emerald ash borer is an invasive pest in North American forests. Ecological impacts of ash mortality from emerald ash borer are wide-ranging, including shifts in insect communities and wildlife behavior. Additionally, loss of ash from forests may have important implications regarding plant succession. Surveys of overstory, midstory, and understory trees within forests in northeastern Indiana, Lower Peninsula of Michigan, and northwestern Ohio were conducted to quantify the change in forest composition over a 10 year period. Interpolation of ash dominance illustrated inversion of live and dead ash values between 2007 and 2017. Even though more than 83% of overstory live ash basal area was lost across the study area, green ash was the most abundant midstory and understory species representing regeneration. Additionally, loss of ash from many of the sites resulted in compositional changes that were greater than merely the subtraction of ash. Due to the relatively large number of forest types with which ash species are associated, loss of ash will have broad ecological consequences, including on community composition.

Description: Details are presented of the development of a coupled modeling simulator for assessing the evolution in the near-field of a geological repository for radioactive waste disposal where concrete is used as a backfill. The simulator uses OpenMI, a standard for exchanging data between simulation software programs at run-time, to form a coupled chemical-mechanical-hydrogeological model of the system. The approach combines a tunnel scale stress analysis finite element model, a discrete element model for accurately modeling the patterns of emerging cracks in the concrete, and a finite element and finite volume model of the chemical processes and alteration in the porous matrix and cracks in the concrete, to produce a fully coupled model of the system. Combining existing detailed simulation software in this way with OpenMI has the benefit of not relying on simplifications that might be necessary to combine all of the modeled processes in a single piece of software.

Description: On 2 February 2018, the China Seismo-Electromagnetic Satellite (CSES) ZhangHeng 01 (ZH-01) was successfully launched, carrying on board, in addition to a suite of plasma and particle physics instruments, a high precision magnetometer package (HPM), able to observe the ultra-low frequency (ULF) waves. In this paper, a night time Pi2 pulsation observed by CSES is reported for the first time. This Pi2 event occurred on 3 September 2018, and began at 14:30 UT (02:37 magnetic local time), when the satellite was in the southern hemisphere between −49 and −13 magnetic latitude (MLAT). Kakioka (KAK) ground station in Japan detected the same Pi2 between 14:30–14:42 UT (23:30–23:42 local time). The Pi2 oscillations in the compressional, toroidal, and poloidal components at the CSES satellite and the H-component at the KAK station are investigated by estimating coherence, amplitude, and cross-phase. We noticed a high degree of similarity between the Pi2 event in the horizontal component at KAK and the ionospheric fluctuations in the compressional component at CSES. This high correlation indicated the magnetospheric source of the Pi2 event. In addition, Pi2 is exhibited clearly in the δBy component at CSES, which is highly correlated with the ground H component, so the Pi2 event could be explained by the Substorm Current Wedge (SCW). This interpretation is further confirmed by checking the compressional component of Van Allen Probe (VAP) B satellite inside the plasmasphere, which, for the first time, gives observational support for an earlier model. This ULF wave observation shows the consistency and reliability of the high precision magnetometer (HPM) equipped by two fluxgate magnetometers (FGM1 and FGM2) onboard CSES.

Description: Since 2006, an increasing number of French vineyards have chosen to convert to organic farming. One major change in vineyard practices includes replacing chemical pesticides with copper and sulfur-based products in line with Council Regulation (EC) No. 834/2007. This change can make overall management and pest and disease control more difficult and potentially lead to yield losses. From 2013 to 2016, a network of 48 vineyard plots, in southern France, under conventional management and in conversion to organic farming were monitored throughout the three-year conversion phase to investigate the grapevine phytosanitary management of four major pests and diseases and variations in control efficiency. The severity of downy and powdery mildew, grape berry moths, and Botrytis bunch rot were assessed and linked to the protection strategy. The findings showed that pests and diseases were controlled in the third year of conversion at similar efficiency levels as in conventional farming. However, the first two years of conversion were a transitional and less successful period during which higher incidences of cryptogamic diseases were observed. This demonstrates a need for winegrowers to receive more in-depth technical advice and support, especially on pest and disease control, during this critical transition period.

Description: Increasing demands on animal welfare and the higher temperatures in summer due to climate change make it necessary to adapt conventional pig husbandry systems. A cooled, solid lying area has the potential to increase lying comfort and reduce the heat stress, which improves animal welfare. In the present study, the effect of a cooled, solid lying area on lying and elimination behavior was investigated. In two fattening compartments, eight pens with 28 pigs each were rebuilt. Two pen designs, different in feeder place and type, were tested. The floor was cooled from 24.5 to 20 °C by cool water in half of the pens. A total of 672 fattening pigs were tested over three fattening periods. The lying behavior was recorded by video analysis three times per week and three times per day. In the pens with a cooled lying area, 14% (SED 2.9; p = 0.002), respectively 12% (SED 0.9; p = 0.0382) more pigs were lying on the solid lying area. Additionally, the fouling of the animals was reduced by the cooling in one pen design; the results were derived from weekly scores (0.42 vs. 0.67; SED 0.058 p = 0.0006). The fouling of the pen was not affected by the floor cooling, however, the fouling in all pens was very low.

Description: The sugarcane (Saccharum spp. L.) mechanical harvesting system leaves a large amount of straw mulch on the soil surface. The straw mulch may affect soil conditions, root regrowth, and sugarcane yield. Thus, this study assessed the response of sugarcane root system growth and stalk yield to different rates of straw removal. An experiment was conducted in a Rhodic Kandiudox with sand clay loam texture to test the impact of four rates of straw removal: no removal (18.9 Mg ha−1 of dry mass); moderate removal (8.7 Mg ha−1); high removal (4.2 Mg ha−1) and total removal on sugarcane root system and stalk yield. Higher concentrations of roots (60%) were found in the first 40 cm of soil. Moderate straw removal resulted in higher root mass (3.6 Mg ha−1) and stalk production (23 Mg ha−1 of dry mass). However, no straw removal reduced root mass by 20% (105 Mg ha−1). Through regression analysis, it was estimated that retaining between 8.5 and 13 Mg ha−1 of straw resulted in the highest root mass and stalk yield. Managing straw removal to retain a moderate amount enables producers to sustain suitable soil conditions for sugarcane root growth and stalk production while providing straw for industrial use.

Description: Proximal sensing techniques can potentially survey soil and crop variables responsible for variations in crop yield. The full potential of these precision agriculture technologies may be exploited in combination with innovative methods of data processing such as machine learning (ML) algorithms for the extraction of useful information responsible for controlling crop yield. Four ML algorithms, namely linear regression (LR), elastic net (EN), k-nearest neighbor (k-NN), and support vector regression (SVR), were used to predict potato (Solanum tuberosum) tuber yield from data of soil and crop properties collected through proximal sensing. Six fields in Atlantic Canada including three fields in Prince Edward Island (PE) and three fields in New Brunswick (NB) were sampled, over two (2017 and 2018) growing seasons, for soil electrical conductivity, soil moisture content, soil slope, normalized-difference vegetative index (NDVI), and soil chemistry. Data were collected from 39–40 30 × 30 m2 locations in each field, four times throughout the growing season, and yield samples were collected manually at the end of the growing season. Four datasets, namely PE-2017, PE-2018, NB-2017, and NB-2018, were then formed by combing data points from three fields to represent the province data for the respective years. Modeling techniques were employed to generate yield predictions assessed with different statistical parameters. The SVR models outperformed all other models for NB-2017, NB-2018, PE-2017, and PE-2018 dataset with RMSE of 5.97, 4.62, 6.60, and 6.17 t/ha, respectively. The performance of k-NN remained poor in three out of four datasets, namely NB-2017, NB-2018, and PE-2017 with RMSE of 6.93, 5.23, and 6.91 t/ha, respectively. The study also showed that large datasets are required to generate useful results using either model. This information is needed for creating site-specific management zones for potatoes, which form a significant component for food security initiatives across the globe.

Description: High-lying vegetated marshes and low-lying bare mudflats have been suggested to be two stable states in intertidal ecosystems. Being able to identify the conditions enabling the shifts between these two stable states is of great importance for ecosystem management in general and the restoration of tidal marsh ecosystems in particular. However, the number of studies investigating the conditions for state shifts from bare mudflats to vegetated marshes remains relatively low. We developed a GIS approach to identify the locations of expected shifts from bare intertidal flats to vegetated marshes along a large estuary (Western Scheldt estuary, SW Netherlands), by analyzing the interactions between spatial patterns of vegetation biomass, elevation, tidal currents, and wind waves. We analyzed false-color aerial images for locating marshes, LIDAR-based digital elevation models, and spatial model simulations of tidal currents and wind waves at the whole estuary scale (~326 km²). Our results demonstrate that: (1) Bimodality in vegetation biomass and intertidal elevation co-occur; (2) the tidal currents and wind waves change abruptly at the transitions between the low-elevation bare state and high-elevation vegetated state. These findings suggest that biogeomorphic feedback between vegetation growth, currents, waves, and sediment dynamics causes the state shifts from bare mudflats to vegetated marshes. Our findings are translated into a GIS approach (logistic regression) to identify the locations of shifts from bare to vegetated states during the studied period based on spatial patterns of elevation, current, and wave orbital velocities. This GIS approach can provide a scientific basis for the management and restoration of tidal marshes.

Description: High frequency and spatially explicit irrigated land maps are important for understanding the patterns and impacts of consumptive water use by agriculture. We built annual, 30 m resolution irrigation maps using Google Earth Engine for the years 1986–2018 for 11 western states within the conterminous U.S. Our map classifies lands into four classes: irrigated agriculture, dryland agriculture, uncultivated land, and wetlands. We built an extensive geospatial database of land cover from each class, including over 50,000 human-verified irrigated fields, 38,000 dryland fields, and over 500,000 km 2 of uncultivated lands. We used 60,000 point samples from 28 years to extract Landsat satellite imagery, as well as climate, meteorology, and terrain data to train a Random Forest classifier. Using a spatially independent validation dataset of 40,000 points, we found our classifier has an overall binary classification (irrigated vs. unirrigated) accuracy of 97.8%, and a four-class overall accuracy of 90.8%. We compared our results to Census of Agriculture irrigation estimates over the seven years of available data and found good overall agreement between the 2832 county-level estimates (r 2 = 0.90), and high agreement when estimates are aggregated to the state level (r 2 = 0.94). We analyzed trends over the 33-year study period, finding an increase of 15% (15,000 km 2 ) in irrigated area in our study region. We found notable decreases in irrigated area in developing urban areas and in the southern Central Valley of California and increases in the plains of eastern Colorado, the Columbia River Basin, the Snake River Plain, and northern California.

Description: Due to the influence of equipment instability and surveying environment, scattering echoes and other factors, it is sometimes difficult to obtain high-quality sub-bottom profile (SBP) images by traditional denoising methods. In this paper, a novel SBP image denoising method is developed for obtaining underlying clean images based on a non-local low-rank framework. Firstly, to take advantage of the inherent layering structures of the SBP image, a direction image is obtained and used as a guidance image. Secondly, the robust guidance weight for accurately selecting the similar patches is given. A novel denoising method combining the weight and a non-local low-rank filtering framework is proposed. Thirdly, after discussing the filtering parameter settings, the proposed method is tested in actual measurements of sub-bottom, both in deep water and shallow water. Experimental results validate the excellent performance of the proposed method. Finally, the proposed method is verified and compared with other methods quantificationally based on the synthetic images and has achieved the total average peak signal-to-noise ratio (PSNR) of 21.77 and structural similarity index (SSIM) of 0.573, which is far better than other methods.

Description: This paper is intended to give a comprehensive overview of the current status and developments of the Paris Observatory STARK-B, MOLAT and SESAM databases which can be interrogated thanks to interoperability tools. The STARK-B database provides shifting and broadening parameters of different atomic and ionic transitions due to impacts with charged particles (the so-called Stark broadening) for different temperatures and densities. The spectroscopic MOLAT and SESAM databases provide the wavelengths, the oscillator strengths or Einstein spontaneous emission coefficients of H 2 , CO and isotopologues molecules.

Description: River discharge is a fundamental hydrologic quantity that summarizes how a watershed transforms the input of precipitation into output as channelized streamflow [...]

Description: Dryland ecosystems are frequently struck by droughts. Yet, woody vegetation is often able to recover from mortality events once precipitation returns to pre-drought conditions. Climate change, however, may impact woody vegetation resilience due to more extreme and frequent droughts. Thus, better understanding how woody vegetation responds to drought events is essential. We used a phenology-based remote sensing approach coupled with field data to estimate the severity and recovery rates of a large scale die-off event that occurred in 2014–2015 in Senegal. Novel low (L-band) and high-frequency (Ku-band) passive microwave vegetation optical depth (VOD), and optical MODIS data, were used to estimate woody vegetation dynamics. The relative importance of soil, human-pressure, and before-drought vegetation dynamics influencing the woody vegetation response to the drought were assessed. The die-off in 2014–2015 represented the highest dry season VOD drop for the studied period (1989–2017), even though the 2014 drought was not as severe as the droughts in the 1980s and 1990s. The spatially explicit Die-off Severity Index derived in this study, at 500 m resolution, highlights woody plants mortality in the study area. Soil physical characteristics highly affected die-off severity and post-disturbance recovery, but pre-drought biomass accumulation (i.e., in areas that benefited from above-normal rainfall conditions before the 2014 drought) was the most important variable in explaining die-off severity. This study provides new evidence supporting a better understanding of the “greening Sahel”, suggesting that a sudden increase in woody vegetation biomass does not necessarily imply a stable ecosystem recovery from the droughts in the 1980s. Instead, prolonged above-normal rainfall conditions prior to a drought may result in the accumulation of woody biomass, creating the basis for potentially large-scale woody vegetation die-off events due to even moderate dry spells.

Description: Augmented reality can improve construction and facility management by visualizing an as-planned model on its corresponding surface for fast, easy, and correct information retrieval. This requires the localization registration of an as-built model in an as-planned model. However, the localization and registration of indoor environments fail, owing to self-similarity in an indoor environment, relatively large as-planned models, and the presence of additional unplanned objects. Therefore, this paper proposes a computer vision-based method to (1) homogenize indoor as-planned and as-built models, (2) reduce the search space of model matching, and (3) localize the structure (e.g., room) for registration of the scanned area in its as-planned model. This method extracts a representative horizontal cross section from the as-built and as-planned point clouds to make these models similar, restricts unnecessary transformation to reduce the search space, and corresponds the line features for the estimation of the registration transformation matrix. The performance of this method, in terms of registration accuracy, is evaluated on as-built point clouds of rooms and a hallway on a building floor. A rotational error of 0.005 rad and a translational error of 0.088 m are observed in the experiments. Hence, the geometric feature described on a representative cross section with transformation restrictions can be a computationally cost-effective solution for indoor localization and registration.

Description: An alternative to the Carnot-Clausius approach for introducing entropy and the second law of thermodynamics is outlined that establishes entropy as a nonequilibrium property from the onset. Five simple observations lead to entropy for nonequilibrium and equilibrium states, and its balance. Thermodynamic temperature is identified, its positivity follows from the stability of the rest state. It is shown that the equations of engineering thermodynamics are valid for the case of local thermodynamic equilibrium, with inhomogeneous states. The main findings are accompanied by examples and additional discussion to firmly imbed classical and engineering thermodynamics into nonequilibrium thermodynamics.

Description: Salt marshes provide important services to coastal ecosystems in the southeastern United States. In many locations, salt marsh habitats are threatened by coastal development and erosion, necessitating large-scale monitoring. Assessing vegetation height across the extent of a marsh can provide a comprehensive analysis of its health, as vegetation height is associated with Above Ground Biomass (AGB) and can be used to track degradation or growth over time. Traditional methods to do this, however, rely on manual measurements of stem heights that can cause harm to the marsh ecosystem. Moreover, manual measurements are limited in scale and are often time and labor intensive. Unoccupied Aircraft Systems (UAS) can provide an alternative to manual measurements and generate continuous results across a large spatial extent in a short period of time. In this study, a multirotor UAS equipped with optical Red Green Blue (RGB) and multispectral sensors was used to survey five salt marshes in Beaufort, North Carolina. Structure-from-Motion (SfM) photogrammetry of the resultant imagery allowed for continuous modeling of the entire marsh ecosystem in a three-dimensional space. From these models, vegetation height was extracted and compared to ground-based manual measurements. Vegetation heights generated from UAS data consistently under-predicted true vegetation height proportionally and a transformation was developed to predict true vegetation height. Vegetation height may be used as a proxy for Above Ground Biomass (AGB) and contribute to blue carbon estimates, which describe the carbon sequestered in marine ecosystems. Employing this transformation, our results indicate that UAS and SfM are capable of producing accurate assessments of salt marsh health via consistent and accurate vegetation height measurements.

Description: Accounting for endmember variability is a challenging issue when unmixing hyperspectral data. This paper models the variability that is associated with each endmember as a conical hull defined by extremal pixels from the data set. These extremal pixels are considered as so-called prototypal endmember spectra that have meaningful physical interpretation. Capitalizing on this data-driven modeling, the pixels of the hyperspectral image are then described as combinations of these prototypal endmember spectra weighted by bundling coefficients and spatial abundances. The proposed unmixing model not only extracts and clusters the prototypal endmember spectra, but also estimates the abundances of each endmember. The performance of the approach is illustrated thanks to experiments conducted on simulated and real hyperspectral data and it outperforms state-of-the-art methods.

Description: Community-based natural resource management (CBNRM) has grown in stature as a key component of many national natural resource and rural development governance systems. Despite their growth, the integrity of CBNRM governance systems has rarely been analysed in a national context. To enhance dialogue about how best to design and deploy such systems nationally, this paper analyses the Australian system in detail. The Australian system was selected because the nation has a globally recognised and strong history of CBNRM approaches. We first contextualise the international emergence of national CBRM governance systems before analysing the Australian system. We find that a theoretically informed approach recognising regions as the anchors in brokering multi-scale CBNRM was applied between 2000 and 2007. Subsequent policy, while strengthening indigenous roles, has tended to weaken regional brokering, Commonwealth–state cooperation and research collaboration. Our findings and consequent emerging lessons can inform Australian policy makers and other nations looking to establish (or to reform existing) CBNRM governance systems. Equally, the research approach taken represents the application of an emerging new theoretical framework for analysing complex governance systems.

Description: Assessments of long-term changes of air quality and global radiative forcing at a large scale heavily rely on satellite aerosol optical depth (AOD) datasets, particularly their temporal binning products. Although some attempts focusing on the validation of long-term satellite AOD have been conducted, there is still a lack of comprehensive quantification and understanding of the representativeness of satellite AOD at different temporal binning scales. Here, we evaluated the performances of the Moderate Resolution Imaging Spectroradiometer (MODIS) AOD products at various temporal scales by comparing the MODIS AOD datasets from both the Terra and Aqua satellites with the entire global AErosol RObotic NETwork (AERONET) observation archive between 2000 and 2017. The uncertainty levels of the MODIS hourly and daily AOD products were similarly high, indicating that MODIS AOD retrievals could be used to represent daily aerosol conditions. The MODIS data showed the reduced quality when integrated from the daily to monthly scale, where the relative mean bias (RMB) changed from 1.09 to 1.21 for MODIS Terra and from 1.04 to 1.17 for MODIS Aqua, respectively. The limitation of valid data availability within a month appeared to be the primary reason for the increased uncertainties in the monthly binning products, and the monthly data associated uncertainties could be reduced when the number of valid AOD retrievals reached 15 times in one month. At all three temporal scales, the uncertainty levels of satellite AOD products decreased with increasing AOD values. The results of this study could provide crucial information for satellite AOD users to better understand the reliability of different temporal AOD binning products and associated uncertainties in their derived long-term trends.

Description: Human activities are mainly responsible for the Aral Sea crisis, and excessive farmland expansion and unreasonable irrigation regimes are the main manifestations. The conflicting needs of agricultural water consumption and ecological water demand of the Aral Sea are increasingly prominent. However, the quantitative relationship among the water balance elements in the oasis located in the lower reaches of the Amu Darya River Basin and their impact on the retreat of the Aral Sea remain unclear. Therefore, this study focused on the water consumption of the Nukus irrigation area in the delta of the Amu Darya River and analyzed the water balance variations and their impacts on the Aral Sea. The surface energy balance algorithm for land (SEBAL) was employed to retrieve daily and seasonal evapotranspiration (ET) levels from 1992 to 2018, and a water balance equation was established based on the results of a remote sensing evapotranspiration inversion. The results indicated that the actual evapotranspiration (ETa) simulated by the SEBAL model matched the crop evapotranspiration (ETc) calculated by the Penman–Monteith method well, and the correlation coefficients between the two ETa sources were greater than 0.8. The total ETa levels in the growing seasons decreased from 1992 to 2005 and increased from 2005 to 2015, which is consistent with the changes in the cultivated land area and inflows from the Amu Darya River. In 2000, 2005 and 2010, the groundwater recharge volumes into the Aral Sea during the growing season were 6.74×109 m3, 1.56×109 m3 and 8.40×109 m3; respectively; in the dry year of 2012, regional ET exceeded the river inflow, and 2.36×109 m3 of groundwater was extracted to supplement the shortage of irrigation water. There is a significant two-year lag correlation between the groundwater level and the area of the southern Aral Sea. This study can provide useful information for water resources management in the Aral Sea region.