ALBERT

Description: Background information and exercises are provided to: (1) establish or expand understanding of the concepts, methods, and terminology of computer processing of image producing data; (2) develop insight into the advantages of computer based image processing compared with the photointerpretation approach for processing, classifying, interpreting, and applying remote sensing data; (3) foster a broad perspective on the principal of the main techniques for image enhancement, pattern recognition, and thematic classification; (4) appreciate the pros and cons of batch and interactive modes of image analysis; (5) examine and evaluate some specific computer generated products for subscenes in Pennsylvania and New Jersey; and (6) interrelate these particular examples of output with more theoretical explanations of computer processing strategies and procedures.

Description: Images characteristics of geographic regions other than the northeastern part of the United States are presented for interpretation. Pre- and post-eruption imagery of Mt. St. Helens volcano serves to demonstrate the advantages of thermal infrared sensing, and the potential for developing a timely, decision oriented thematic map to be used in solving drought-related problems in Upper Volta is examined to show the applicability of satellite remote sensing in all geographic areas.

Description: The 1980 eruptions of Mount St. Helens in southeast Washington resulted in a pronounced effect on the surface and ground water resources of the state. In response to the volcanic activity, the U.S. Geological Survey intensified statewide surface and ground water sampling programs to determine the nature and magnitude of the volcanic-induced variations. Streams to the east of Mount St. Helens received the major ash fallout. Chemical effects were best noted in smaller streams sampled 60 to 70 miles northeast of Mount St. Helens. The chemical variations observed were pronounced but short lived. Sulfate and chloride increases in anionic composition were prevalent immediately following the eruption; however, the original bicarbonate predominance was again attained within several days. Suspended iron and aluminum concentrations were similarly elevated during the period of greatest ash deposition (highest turbidity); however, the dissolved concentrations remained relatively constant. Depressions of pH were minor and short lived. Streams draining to the south, tributaries to the Columbia river, showed little observable changes in water chemistry. Streams draining to the west (Toutle river and its tributaries) were compositionally affected by the various volcanic activities. Chloride and sulfate anion percentage exceeded the bicarbonate percentage up to one month following the eruption period. Streams and lakes sampled in the immediate vicinity of Mount St. Helens, in addition to trace metals, contained organic compounds derived from decomposing wood buried in the debris deposits. This organic material may constitute a significant source of organic compounds to surface and ground water for some time to come.

Description: The benefits-to-cost ratio of satellite remote sensing, both as a substitute for conventional methods of monitoring and assessing resources, and as a supplement to these methods is examined using a model which analyzes the cost of aerial photography versus satellite scanner for producing and interpreting an image of the Earth's surface sized to LANDSAT dimensions. Examples of cost savings are tabulated for ground surveys, aerial photos, and LANDSAT. Possible additional benefits from LANDSAT D are assessed. The way in which satellites fit into more comprehensive models for resources management is discussed. It is shown that remote sensing is but one essential component in a complex system that aggregates technical. Socioeconomics, political, cultural, and other factors in the human decision process.

Description: Computer processing facilitates extraction of information from every pixel by executing a variety of functional operations, called processed algorithms, in general or specialized routines. The best results are obtained when data from more than one multispectral band are used together. Multivariate tatistical analysis, computer tape characteristics, processing modes, and a choice of systems (batch or interactive) are discussed. The major operations in computer processing elaborated include: preprocessing, enhancement, effects of rationing, and classification. Techniques for multisource data correlation are considered with emphasis on geobased systems.

Description: Learning objectives include: (1) developing an understanding of the implications of the term "near surface observations"; (2) associating the appearance of large ground features as seen in satellite imagery with their appearance as seen from the ground; (3) grasping criteria and procedures for selecting training sites on the ground for use in supervised classification; (4) running through an example of training site selection; (5) becoming familiar with several methods of accuracy assessment; (6) becoming aware of the approach and value of making supporting measurements of the spectral and physical properties of materials on the ground and from aircraft; (7) taking note of the different types of instruments used in making specific ground measurements; and (8) appreciating the rationale underlying laboratory and field studies on or near the Earth's surface for the purpose of developing new sensor systems.

Description: Learning objectives include: (1) developing a facility for applying conventional techniques of photointerpretation to small scale (satellite) imager; (2) promoting the ability to locate, identify, and interpret small natural and man made surface features in a LANDSAT image; (3) using supporting imagery, such as aerial and space photography, to conduct specific applications analyses; (4) learning to apply change detection techniques to recognize and explain transient and temporal events in individual or seasonal imagery; (5) producing photointerpretation maps that define major surface units, themes, or classes; (6) classifying or analyzing a scene for specific discipline applications in geology, agriculture, forestry, hyrology, coastal wetlands, and environmental pollution; and (7) evaluating both advantages and shortcomings in relying on the photointerpretive approach (rather than computer based analytical approach) for extracting information from LANDSAT data.

Description: Activities are provided for: (1) developing insight into the way in which the LANDSAT MSS produces multispectral data; (2) promoting understanding of what a "pixel" means in a LANDSAT image and the implications of the term "mixed pixel"; (3) explaining the concept of spectral signatures; (4) deriving a simple signature for a class or feature by analysis: of the four band images; (5) understanding the production of false color composites; (6) appreciating the use of color additive techniques; (7) preparing Diazo images; and (8) making quick visual identifications of major land cover types by their characteristic gray tones or colors in LANDSAT images.

Description: Learning objectives of the activities provided include: (1) reading the annotation of a LANDSAT image; (2) becoming acquainted with the characteristics of 1:1,000,000 scale transparencies and prints of MSS images; (3) noting the general information visible in LANDSAT photo products; (4) observing changes of appearance of any ground feature or class in the black and white images made from the four MSS bands and the characteristic color of each class in color composites; (5) determining the degree to which a LANDSAT image meets map accuracy standards and can be fitted to map projections; (6) assessing the effects of LANDSAT enlargements and scale changes and of the limitations of satellite resolution relative to aerial photos; (7) observing the influence of time of acquisition (season) on a scene; (8) getting a feel for image quality as dependent on processing and photoreproduction; (9) appreciating the characteristics of the RBV and thermal band imagery obtained from LANDSAT-3; and (10) becoming familiar with certain attributes of adjacent LANDSAT images which permit them to be joined in mosaics and to be viewed in stereo.

Description: The primary LANDSAT mission and the system requirements are summarized and pertinent parameters of the spacecraft, its orbit, and payload are tabulated. The history acquisition to entry into the archives for storage and product generation and dissemination is recounted. The LANDSAT D data handling plan is discussed showing requirements for both the MSS CCT and the thematic mapper CCT.

Description: The term remote sensing is defined as well as ideas such as class, pattern, feature, pattern recognition, feature extraction, and theme. The electromagnetic spectrum is examined especially those wavelength regions available to remote sensing. Relevant energy and wave propagation laws are discussed and the characteristics of emitted and reflected radiation and their detection are investigated. The identification of classes by their spectral signatures, the multispectral approach, and the principal types of sensors and platforms used in remote sensing are also considered.

Description: Operation of the microwave instrument as a two frequency scatterometer, a synthetic aperture radar, and a passive microwave radiometer is planned. Operation of the instrument in each of its three modes is discussed and the antenna system described.

Description: LANDSAT data acquired over an agricultural area along with ground enumeration of the same area are used to obtain crop acreage estimates which are better (as measured in terms of bias and variance) than can be obtained from either data source alone. Two basic approaches considered within the AgRISTARS program are a stratified crop acreage estimator and a regression estimator. A statement of the problem was mathematically formulated and some theorems were proved which relate to the variance of the two estimators. For a particular set of data, the regression and stratified estimators are compared in terms of certain easily computed parameters.

Description: The history of remote sensing is reviewed and the scope and versatility of the several remote sensing systems already in orbit are discussed, especially those with sensors operating in other EM spectral modes. The multisensor approach is examined by interrelating LANDSAT observations with data from other satellite systems. The basic principles and practices underlying the use of thermal infrared and radar sensors are explored and the types of observations and interpretations emanating from the Nimbus, Heat Capacity Mapping Mission, and SEASAT programs are examined. Approved or proposed Earth resources oriented missions for the 1980's previewed include LANDSAT D, Stereosat, Gravsat, the French satellite SPOT-1, and multimission modular spacecraft launched from space shuttle. The pushbroom imager, the linear array pushbroom radiometer, the multispectral linear array, and the operational LANDSAT observing system, to be designed the LANDSAT-E series are also envisioned for this decade.

Description: The use of computer aided classification of LANDSAT data in developing water quality plans for New Jersey watersheds is used to exemplify how a state natural resource management program benefits from satellite imagery. The transition of a research and development system into an operational remote sensing system to help decision makers is demonstrated. Nontechnial issues that can assist (or hinder) an agency in adopting a new technology are examined. The progress of LANDSAT use by state government from the earliest stage of curiosity through to incorporation in actual state planning methods is charted. Potential applications of LANDSAT data to real information needs and solutions to management problems are examined. The problems and mistakes that occurred in using LANDSAT data in the past are discussed as well as the ways by which these problems were overcome.

Description: Information and activities are provided to: (1) enhance the ability to distinguish between a Geographic Information System (GIS) and a data management system; (2) develop understanding of spatial data handling by conventional methods versus the automated approach; (3) promote awareness of GIS design and capabilities; (4) foster understanding of the concepts and problems of data base development and management; (5) facilitate recognition of how a computerized GIS can model conditions in the present "real world" to project conditions in the future; and (6) appreciate the utility of integrating LANDSAT and other remotely sensed data into the GIS.

Description: A multistage sampling procedure using image processing, geographical information systems, and analytical photogrammetry is presented which can be used to guide the collection of representative, high-resolution spectra and discrete reflectance targets for future satellite sensors. The procedure is general and can be adapted to characterize areas as small as minor watersheds and as large as multistate regions. Beginning with a user-determined study area, successive reductions in size and spectral variation are performed using image analysis techniques on data from the Multispectral Scanner, orbital and simulated Thematic Mapper, low altitude photography synchronized with the simulator, and associated digital data. An integrated image-based geographical information system supports processing requirements.

Description: A goal of future synthetic aperture radar (SAR) system design is to yield the radiometrically accurate imagery necessary for use in classification problems. To accomplish this, a reliable calibration technique must be developed. Many such techniques have been proposed (e.g., Stiles and Holtzman, 1982); however, until now, none have been tested on spaceborne SAR digital data. In this paper, a method of significantly increasing the reproducibility of several independent Seasat SAR data sets of a test site using an automated correction procedure is described.

Description: The spectral and spatial requirements for remote sensing in the next decade are presented. The requirements presented were obtained through extensive literature research and discussions with leading members of the various remote sensing research communities. In the 0.35-2.5 micron region of the spectrum, numerous bands will be needed at bandwidths as narrow as 10-20 nanometers. There is also growing interest in the thermal infrared (8-14 microns). Spatial resolution (instantaneous field of view) of 5 to 10 meters will be of great benefit to many fields of remote sensing.

Description: The presence of positive serial correlation (autocorrelation) in remotely sensed data results in an underestimate of the variance-covariance matrix when calculated using contiguous pixels. This underestimate produces an inflation in F statistics. For a set of Thematic Mapper Simulator data (TMS), used to test the ability to discriminate a known geobotanical anomaly from its background, the inflation in F statistics related to serial correlation is between 7 and 70 times. This means that significance tests of means of the spectral bands initially appear to suggest that the anomalous site is very different in spectral reflectance and emittance from its background sites. However, this difference often disappears and is always dramatically reduced when compared to frequency distributions of test statistics produced by the comparison of simulated training sets possessing equal means, but which are composed of autocorrelated observations. Previously announced in STAR as N82-25602

Description: A complete automatic unsupervised classification approach has been developed to estimate the proportion of corn, soybeans, and other crops in a Landsat 5-by-6-nanometer segment. The technique involves extracting crop growth variables that are predictable from agromet models, it provides a signature extension not possible before. The technique has been applied in 3 years (1978-1980) for 56 segments and shows neither a year-to-year effect nor any geographic effect. The results to date are considered far better than those obtainable from any other currently available technique. Nontheless, the technique can be improved to reduce the bias.

Description: Since NASA's program of research concerning remote sensing was initiated in the 1960s, one of its major objectives has been to advance the state-of-the-art in machine processing of satellite acquired multispectral data. Possibilities have been studied regarding a use of these data to identify type, to monitor condition, and to estimate the ontogenetic stage of cultural vegetation. The present investigation provides a review of the state-of-the-art of the technology used to make remote sensing crop production estimates in foreign regions. Attention is given to Landsat data acquisition, aspects of registration and preprocessing, questions of data transformation, data modeling, proportion estimation, labeling, development stage models, crop condition models, and an outlook regarding future developments.

Description: The improved spatial resolution of the new earth resources satellites will increase the need for effective utilization of spatial information in machine processing of remotely sensed data. One promising technique is scene segmentation by region growing. Region growing can use spatial information in two ways: only spatially adjacent regions merge together, and merging criteria can be based on region-wide spatial features. A simple region growing approach is described in which the similarity criterion is based on region mean and variance (a simple spatial feature). An effective way to implement region growing for remote sensing is as an iterative parallel process on a large parallel processor. A straightforward parallel pixel-based implementation of the algorithm is explored and its efficiency is compared with sequential pixel-based, sequential region-based, and parallel region-based implementations. Experimental results from on aircraft scanner data set are presented, as is a discussioon of proposed improvements to the segmentation algorithm.

Description: The scientific instruments comprising the OSTA-1 package flown on the second Shuttle mission (November 12-14, 1981) are listed, and the Shuttle Imaging Radar (SIR-A) experiments are examined in detail: SIR-A operated for 8 h and obtained images covering more than 10 million sq km at 40-m resolution. The images were recorded on photographic film and processed in holographic form at JPL, and data for Southern Europe and parts of Africa were distributed to French scientists by the Groupement pour le Developpement de la Teledetection Aerospatiale. The main areas of research were environmental studies and geology, and the SIR-A images were used in combination with aerial photography, thematic maps, and Landsat images. The technical specifications of the SIR-B radar planned for STS-17 in 1984 are compared with those of SIR-A and Seasat SAR in tables.

Description: The use of remote sensing in resource exploration is reviewed, with emphasis placed on new developments in high spectral resolution remote-sensing techniques for mineralogic and vegetation mapping. Topics discussed include aerial photography and satellite remote sensing, concepts and principles of spectral data collection, spectral properties of rocks and minerals, spectral properties of vegetation, and botanical aspects of geochemical stress. The discussion also covers applications of Landsat multispectral scanner data to lithologic and geobotanic studies and the future development of data acquisition and data interpretation techniques.

Description: In this paper, results of a Monte Carlo simulation of the effect of noise on the relationship between the microwave emissivity of soil and its moisture content are presented. It is found that whenever the magnitude of the noise for the independent variable, in this case the soil moisture, is increased, both the slope of the regression and the correlation coefficient decrease. In particular, when the noise has magnitude equivalent to a coefficient of variation of 0.25, the slope and correlation coefficient are in good agreement with those obtained from the data of a 21-cm airborne microwave radiometer which was flown over a test site in hand county, South Dakota. The comparison was made using a linear relationship to determine the estimated emissivity from the ground measurements of soil moisture. The linear relationship was derived from a radiative transfer model calculation of the microwave emissivities using realistic soil-moisture profiles. The effect of surface roughness was included in the relationship, and the variability of the surface roughness was also simulated by a Monte Carlo technique.

Description: Automated information extraction procedures for analysis of multitemporal Landsat data in non-U.S. crop inventory and monitoring are reviewed. Experiments to develop and evaluate crop area estimation technologies for spring small grains, summer crops, corn, and soybeans are discussed. Previously announced in STAR as N82-32793

Description: Agriculture, which occupies a vital position in the economy of the State of California, depends crucially on the available water. The California Department of Water Resources (DWR) is, therefore, greatly concerned with the total water requirements for agricultural applications. In view of the limitations of an area-limited, single-date survey system, the DWR has been cooperating with NASA and the University of California in a study of the applicability of Landsat imagery and digital data as an aid in making decisions concerning the management of water resources. Attention is given to a statewide inventory of irrigated land, computer-assisted estimation and mapping of irrigated land, and a crop type analysis using Landsat digital data.

Description: The development of a preprocessing unit for Landsat Thematic Mapper (TM) data for the Earth Observations Data Laboratory at Johnson Space Center is reported. The background of the project is sketched, including the greatly increased data-handling requirements compared to MSS, the influence of the JPL VICAR system on the system design, and the completeness of the GSFC SCROUNGE (LASLIB) TM data tapes. The design approach and realization are discussed, and the performance and transportability of the preprocessor programs (totaling about 2000 lines of source code in FORTRAN and IBM Assembly languages) are indicated. The system is able to read the TM image tapes, extract areas of interest to particular studies, and register the extracted imagery to suitable references. Ancillary programs include image enhancement, rotation, filtering and pixel-size modification.

Description: Features of the NASA Regional Application Program for providing state and local land management agencies an opportunity to assess the usefulness of emerging remote sensing technology are described. The Program guidelines necessitated configuring software for local facilities, assuring that the aggncy involved furnished manpower, and applying the technology to local needs. The study focused on the southwestern U.S., particularly for purposes of water management, federal/state ownership/policy, energy development, environmental impact issues, timber and range inventory, fire control, and urban expansion. Demonstration projects were conducted in various topics, according to the state surveyed, with the success of the projects determined by the willingness of the agencies to continue with the technology, which happened in several cases.

Description: The California Integrated Remote Sensing System's San Bernardino County Project was devised to study the utilization of a data base at a number of jurisdictional levels. The present paper discusses the implementation of change-detection and masking techniques in the updating of Landsat-derived land-cover maps. A baseline landcover classification was first created from a 1976 image, then the adjusted 1976 image was compared with a 1979 scene by the techniques of (1) multidate image classification, (2) difference image-distribution tails thresholding, (3) difference image classification, and (4) multi-dimensional chi-square analysis of a difference image. The union of the results of methods 1, 3 and 4 was used to create a mask of possible change areas between 1976 and 1979, which served to limit analysis of the update image and reduce comparison errors in unchanged areas. The techniques of spatial smoothing of change-detection products, and of combining results of difference change-detection algorithms are also shown to improve Landsat change-detection accuracies.

Description: A technique is examined for improving the comparability of Landsat multisppectral scanner (MSS) data acquired on different dates. The technique involves conversion of digital brightness counts to relative radiance values measured in energy units (milliwatts per square centimeter-steradian). The statistical data of signature from 23 land cover (or biomass) classifications derived from all three Landsats were compared before and after the radiance normalization. Significant convergence occurred among the data sets for mean spectral values and the variances associated with each of seven major land cover types for MSS bands 4, 5, and 7. Overall, the variance attributed to the sensor component was reduced from 5.39 to 2.69 percent, with the largest decrease occurring in band 4 (14.4 percent to 3.7 percent).

Description: The spectral reflectance characteristics of vegetation have been studied with the objective to learn how to extract useful information about the state of surface vegetation from space-borne observing systems, with emphasis on agricultural applications. Results of simulation studies based on high-resolution airborne spectrometer data indicate that changes in biomass, plant pigment, and leaf water content can be independently tracked by monitoring the reflective properties of vegetation with an appropriate selection of bands.

Description: The effects of azimuthal view angle on the radiometric temperature of wheat canopies at various stages of development are investigated. Measurements of plant height, total leaf area index, green leaf area index and Feeks growth stage together with infrared radiometric temperature measurements at 12 azimuth intervals with respect to solar azimuth and at different solar zenith angles were obtained for four wheat canopies at various heights. Results reveal a difference on the order of 2 C between the temperatures measured at azimuths of 0 and 180 deg under calm wind conditions, which is attributed to the time-dependent transfer of heat between canopy component surfaces. The azimuthal dependence must thus be taken into account in the determination of radiometric temperatures.

Description: The relation of reflectance to backscatter and absorption parameters is investigated for waters more turbid than those of previous investigations. Experimental data are examined for river waters in which beam attenuation values range from 8.9 to 18.9 per m at 550 nm. Attenuation, absorption, backscatter, and irradiance reflectance spectral properties are presented for wavelengths between 450 and 800 nm. Comparisons of reflectance with backscatter to absorption ratio and backscatter with absorption plus backscatter ratio indicate that data for turbid waters do not fit linear or polynomial models which are presently available in the literature.

Description: Several general guidelines should be kept in mind when considering the selection of field sites for teaching remote sensing fundamentals. Proximity and vantage point are two very practical considerations. Only through viewing a broad enough area to place the site in context can one make efficient use of a site. The effects of inclement weather when selecting sites should be considered. If field work is to be an effective tool to illustrate remote sensing principles, the following criteria are critical: (1) the site must represent the range of class interest; (2) the site must have a theme or add something no other site offers; (3) there should be intrasite variation within the theme; (4) ground resolution and spectral signature distinction should be illustrated; and (5) the sites should not be ordered sequentially.

Description: Especially designed field studies are needed in remote sensing technology transfer courses regardless of the field work provided by the students'/trainees' major disciplines because the remote sensing discipline has unique emphases and needs. Modification of existng schedules to include field work provides the equivalent of extending the duration of the program with the added benefit of enhancing learning achievements per actual program day. The process of surface truth field instruction, levels of student capabilities and stages in the development of surface truth field studies are discussed.

Description: Collection of ground information and supportive materials are absolutely necessary to verify and substantiate data extracted by the interpretation process regardless of sensor type and scale. Field observation and notes, the use of topographic and thematic maps, crop calendars, and climate records are just four examples of supportive materials which often are used in conjunction with remotely sensed materials. Illustration of this integrated multisensor approach is provided by four examples from the March, 1978 Santa Maria LANDSAT C Conference and Workshop. Four distinctive window sites were selected to demonstrate the usefulness of remotely sensed materials to solve geographic problems.

Description: The plan is presented for a two day workshop held to provide educational and training experience in the reading, interpretation, and application of LANDSAT and correlated larger scale imagery, digital printout maps, and other collateral material for a large number of participants with widely diverse levels of expertise, backgrounds, and occupations in government, industry, and education. The need for using surface truth field studies with correlated aerial imagery in solving real world problems was demonstrated.

Description: The feasibility of enhancing LANDSAT products to provide the greatest usability low cost data possible can be determined through government sponsorship and finance of one or more task forces composed of a critical number of experts in multiple disciplines from many industries and academia. The synergism of multiple minds addressing singular problems without the creation of permanent or perpetual structures must yield output in the form of implementable specifications, even if presented as alternatives. Changes are needed within the spacecraft in order to account for Sun angle changes. The use of pointing accuracy to make geometric corrections (and possible radiometric corrections, is needed more than onboard data reduction and information extraction, which assume a proper knowledge of application and reduce potential utilization. Multilinear arrays need to be investigated and methods for sensor calibration and for determining the effects of atmospheric inversion, as well as the best way to back out the modulation transfer function must be determined.

Description: Monitoring biomass of wetlands ecosystems can provide information on net primary production and on the chemical and physical status of wetland soils relative to anaerobic microbial transformation of key elements. Multispectral remote sensing techniques successfully estimated macrophytic biomass in wetlands systems. Regression models developed from ground spectral data for predicting Spartina alterniflora biomass over an entire growing season include seasonal variations in biomass density and illumination intensity. An independent set of biomass and spectral data were collected and the standing crop biomass and net primary productivity were estimated. The improved spatial, radiometric and spectral resolution of th LANDSAT-4 Thematic Mapper over the LANDSAT MSS can greatly enhance multispectral techniques for estimating wetlands biomass over large areas. These techniques can provide the biomass data necessary for global ecology studies.

Description: Thematic mapper scenes for Washington, D.C. and Macon, Georgia were examined to determine their radiometry and geometric accuracy. Specific band ratios were used to determine their effectiveness in defining vegetation and rock mineralogy. the TM 3/4 band ratio was used to define vegetation and the 5/2 band ratio was used to define limonitic rocks. The 5/7 band ratio was evaluated to test the effectiveness of the 1.6 and 2.2 mm bands in detecting clay and carbonate bearing rocks. Preliminary results show that clay minerals containing absorption bands at 2.2 mm, which are centered in the TM band 7, can be readily detected when the band ratio images are suitably contrast stretched. Bright rocks, such as marbles, which contain absorption bands in the 2.33 mm region, near the wavelength of TM band 7, are only evident upon harsher contrast stretching of the 5/7 band ratio. Geobotanical studies of Washington, D.C. show that monospecific forest canopies can be differentiated.

Description: There are small differences between the average DN for the 16 detectors in each band, typically 0.8 DN; the standard deviations also differ typically by 0.4 DN. Differences of mode in a band are as large as 6 DN. Some DN levels appear to be strongly favored over adjacent levels. Differences between forward and reverse scans are approximately 0.1 DN in the mean, and 0 to 0.6 DN in the standard deviation. Geometrically resampled images (P data), in which the fixed correspondence between lines and single detectors is lost, are statistically similiar to the ensemble of detectors in each band in A data. The magnitude of inter-detector variation is readily seen by making an image of the first derivative in the vertical (line) direction of a flat field and stretching progressively wider ranges to gray; most detectors differ from their neighbors by 1 to 2 DN. The film output from the GSFC filmwriter used for TM images was found to have scale errors in both sample and line directions corresponding to four pixels in a TM image, and skew corresponding to three pixels.

Description: An approach is described for providing periodic inflight absolute radiometric calibrations of the LANDSAT-4 sensors by reference to selected, instrumented ground areas. Results of some early ground measurements and computer simulations are presented. Selection of a suitable ground reference site, accurate measurement of the spectral reflectance of the selected area, determination of atmospheric characteristics during the morning of the sensor overpass, reduction of the measured data and their use in an appropriate atmospheric radiative transfer program, and comparison of the radiance level data with the digital counts of for the images of the selected areas are discussed. Preliminary measurements of gypsum are being made as an aid in defining the characteristics of field equipment to be constructed and calibrated for use over the White Sands Missile Range.

Description: Data collected on the spectral characteristics of the LANDSAT-4 and LANDSAT-4 backup thematic mapper instruments, the protoflight (PF) and flight (F) models, respectively are analyzed and summarized. Tests were conducted on the instruments and their components to determine compliance with two sets of spectral specifications: Band-by-band spectral coverage and channel-by-channel within-band spectral matching.

Description: The TM band 6 shutter background and the 34.7 C internal black body signal were measured over 50 day dates. Variability of the shutter background temperature was from 7 C to 11 C. For ten specific images, the digital counts of the calibration data were measured. The average pulse value of the black body peak decreased from 174 to 149 counts while the shutter background counts varied as a function of shutter temperature from 77 to 85. Relative internal gains between the four channels were calculated and compared to prelaunch values. They showed gains over 9 months of up to 5%. Frequency histograms of number of pixels vs. digital counts from a night scene were used to determine gain relative to the mean and to discern a systematic along-scan pattern in a difference between forward and reverse scan counts of up to 0.5. A corrected digital image was obtained. A temperature estimate for and area of Lake Erie of 18.5 C to 19.9 C was obtained. Local temperature records showed 21 C.

Description: Differences in overall sensor response, due to both factors within the sensor system, and external factors such as atmospheric effects, must be dealt with before change detection techniques using image differencing can be successfully implemented. The approach used to be coregister data to a base, followed by between image scatterogram generation and evaluation, and image differencing. Data from LANDSAT 2 and 3 were registered to LANDSAT 4 data. The area was limited to a small protion of the scene near the City of Santa Cruz because this was the only area cloud and haze free on all the images. Visual examination of each image, as well as the between image scatterograms, provide information on radiometric characteristics of each sensor. The image differencing, after normalizing for radiometric differences, provides a visual depiction of geometric distortions.

Description: Two full frames of radiometrically corrected (Type A) LANDSAT-4 MSS data were analyzed digitally and visually for evidence of residual calibration differences between detectors, quantization effects, and other sensor-related artifacts. Both standard statistical and Fourier analysis techniques were employed. Opportunities for coincident coverage by LANDSATS 3 and 4 were identified in the contiguous 48 states. Paired acquisitions for two scenes were obtained and analyzed to establish relationships between signal values from common areas imaged by the two MSS Systems. Initial findings on detector-to-detector differences, coherent noise, and LANDSAT 4 to LANDSAT 3 calibration are summarized. Results show that LANDSAT 4 MSS produces data of generally good quality with dynamic ranges and target responses similar to those of previous sensors.

Description: Key spectral, radiometric, and geometric characteristics of the TM sensor are examined. Spectrally, band 5 is slightly wider than specified and its upper edge at 50% of miximum of 1784 nm includes some unintended overlap with water absorption bands. Thermal band 6 is half the expected width. Radiometrically, the TM has extreme linearity and stability in comparison with previous MSS photomultiplier systems. Forward and reverse scans on TM show some unexplained radiometric differences of up to four digital levels. Primary focal plane bands show a monotomic decrease in gain of about 5% in the five months since launch. The relative internal gains of bands 5 and 7 varied with a period of about 60 days and an amplitude of about 6%. Radiometric calibration must be applied before histogram equalization algorithms to preserve radiometric accuracy. Geometrically, channel 4 in band 2 has a smaller modulation transfer function than desired. There is apparent misregistration of .75 pixels along scan and 0.2 pixels across scan.

Description: The characterization objectives of the LANDSAT 4 Science Office at GSFC are to: (1) determine the accuracy and precision of sensor and spacecraft performance, image data quality, and derived information; (2) recommend LANDSAT 4 system improvements; and (3) communicate results to the research community. In-house activities are directed toward full access and utilization of the prelaunch and in-orbit engineering test data on the sensor and spacecraft. Principle scientists in remote sensing are involved as part of a major scientific characterization effort, and workshops were held for these investigative teams. A symposium is scheduled prior to turnover of the TM to NOAA.

Description: The LANDSAT 4 thematic mapper sensor possesses approximately twice the spectral resolution, three times the spatial resolution, and four times the spectral sensitivity of the MSS sensor on earlier LANDSAT satellites. Spectral bands on the TM, particularly those at wavelengths of 1.6 and 2.2 micrometers are useful for: (1) distinguishing crops such as rice and soybeans; (2) surveying areas that are cultivated in strip crop fashion; (3) determining clay variations and abundances and rock classifications; and (4) differentiating nutrients and sediments found in coastal waters. The sensor can identify surface features 30 meters on a side, which roughly corresponds to a standard city block. Highway construction, land excavation, urban growth, and the health and extent of vegetation can be detected.

Description: The capabilities of the multispectral scanner and thematic mapper aboard LANDSAT-D are reviewed in terms of spectral, spatial, and radiometric resolution. The applications made possible by increased sensor sensitivity are discussed. Communication relay systems and the ground segment are also described.

Description: The potential of radar imagery from space altitudes is discussed and the advantages of radar over passive sensor systems are outlined. Specific reference is made to the SEASAT synthetic aperture radar. Possible applications include oil spill monitoring, snow and ice reconnaissance, mineral exploration, and monitoring phenomena in the urban environment.

Description: A synopsis of a forum addressing the use of LANDSAT data in forestry is given. Broad inventory studies, clear-cut monitoring, and insect and disease detection were among the subject areas discussed. Concerns regarding the vailability of data, cloud cover, resolution and classification accuracy, and product format were expressed by foresters.

Description: The use of LANDSAT multispectral scanner data from several different dates to classify ground cover in Rhode Island is discussed. The advantage of using several dates is that seasonal data can be incorporated in the classification. In order to circumvent the problem of increased computer computation time, the dimensionality of the input data is reduced by the 'principal components method'. This technique and its implementation are described along with regisration, classification, and verification tasks.

Description: A preliminary dynamic model of beaver spatial distribution and population growth was developed. The feasibility of locating beaver ponds on LANDSAT digital tapes, and of using this information to provide initial conditions of beaver spatial distribution for the model, and to validate model predictions is discussed. The techniques used to identify beaver ponds on LANDSAT are described.

Description: The use of remote sensors and multispectral analysis techniques in solving environmental and resource management problems in the coastal zone is illustrated. The specific applications discussed include the analysis of coastal vegetation and productivity, remote sensing of estuarine fronts and their effects on oil dispersion, drift and dispersion of ocean-dumped wastes, and multispectral analysis of water pollutants and suspended sediment concentration.

Description: The objectives of the remote sensing center at the University of Massachusetts are described. These include research, facilities development, applications, education, and regional cooperation.

Description: The implementation of the Office of Remote Sensing of Earth Resources (ORSER) software package from Pennsylvania State University onto the University of Vermont's IBM model 3031 computer is discussed. This version of ORSER was found to be much more user-friendly than remote access to the Penn State ORSER package.

Description: A brief history of the Minnesota Land Management Information Center is given and the present operational status and plans for future development are described. The incorporation of LANDSAT data into the system, hardware and software capabilities, and funding are addressed.

Description: Efforts to classify the water quality characteristics of lakes using LANDSAT imagery are reported. Image processing and registration techniques are described. A lake classification scheme which involves the assignment of a trophic class number was used in the data analysis. The resulting values were compared to the corresponding rank assignment derived from field measurements.

Description: The applications of forest clearcut maps derived from LANDSAT data are dicussed. Such maps provide harvest location information useful in general management and indicate the stage of regrowth which helps determine timber stand improvement practices. The clearcut maps are also used in fire control planning and in determining wildlife habitats.

Description: The use of LANDSAT in providing forest data on a county basis was investigated. Image interpretation and classification techniques and their accuracy are addressed. LANDSAT data was also used to detect and delineate defoliation caused by tent caterpillars.

Description: The development and use of signature packages which provide a forest type map and which identify clearcut areas is discussed. The type map divides the forest land into three categories: softwood, mixed wood, and hardwood. The user defines each of these categories and adjusts the signature package to fit his needs. Success in identifying clearcuts and their stage of regrowth was demonstrated in New Hampshire where clearcuts range in size from 5 to 100 acres with between 30 and 40 acres being the most common.

Description: A model for the effective interaction of user, technical and consultant groups in incorporating remote sensing into applied research conducted by local, regional, and state agencies is outlined.

Description: Low altitude black and white aerial photography is the prinicipal remote sensing tool for geologic investigations in West Virginia, although side looking radar and color infrared photography are also used. The first land use/cover map for the state was produced in color infrared and is being digitized. Linear features in Cabell and Wayne Counties, as revealed by LANDSAT, were evaluated to test the possible correlations with rock fractures and gas production from shales. A LANDSAT linear features map (1:250,000) was prepared for the entire state, also. Presently investigations are being made to understand karst and to predict areas that should not be used for development. Aerial photography and field mapping is being conducted to detect the location and causes of landslides.

Description: The approach used to obtain reliable countywide forest resource data, including statistics and a forest cover distribution map from LANDSAT data is described. Comparison of results of the LANDSAT anlysis and U.S. Forestry Survey data is presented in a table. Pine, oak/pine, and oak/hickory accounted for 22.3%, 32.6% and 45.2% respectively of the total forest area in the LANDSAT analysis, compared to 22.8%, 30.1%. and 47.1% in the Forest Survey. The corresponding figures for each forest type differ at most 2.5% for the mixed forest. The total county area in forest land measured using LANDSAT was underestimated by 1,409 acres, a 2.2% error based on the Forest Survey statistics. However, the estimate of 61,242 acres fell well within the known 4% uncertainty of the estimate for the Forest Survey figures (62,651 acres + or - 2,544 acres).

Description: To support the deer range improvement project in Michigan, the capability of LANDSAT data in assessing deer habitat in terms of areas and mixes of species and age classes of vegetation is being examined to determine whether such data could substitute for traditional cover type information sources. A second goal of the demonstration project is to determine whether LANDSAT data can be used to supplement and improve the information normally used for making deer habitat management decisions, either by providing vegetative cover for private land or by providing information about the interspersion and juxtaposition of valuable vegetative cover types. The procedure to be used for evaluating in LANDSAT data of the Lake County test site is described.

Description: The lack of adequate, current data on land and water surface conditions in New Jersey led to the search for better data collections and analysis techniques. Four-channel MSS data of Cape May County and access to the OSER computer interpretation system were provided by NASA. The spectral resolution of the data was tested and a surface cover map was produced by going through the steps of supervised classification. Topics covered include classification; change detection and improvement of spectral and spatial resolution; merging LANDSAT and map data; and potential applications for New Jersey.

Description: In an effort to locate sources of natural gas in Ohio, the fractures and lineaments in Black Devonian shale were measured by: (1) field mapping of joints, swarms, and fractures; (2) stereophotointerpretation of geomorphic lineaments with precise photoquads; and (3) by interpreting the linear features on LANDSAT images. All results were compiled and graphically represented on 1:250,000 scale maps. The geologic setting of Lawrence County was defined and a field fracture map was generated and plotted as rose patterns at the exposure site. All maps were compared, contrasted, and correlated by superimposing each over the other as a transparency. The LANDSAT lineaments had significant correlation with the limits of oil and gas producing fields. These limits included termination of field production as well as extensions to other fields. The lineaments represent real rock fractures with zones of increased permeability in the near surface bedrock.

Description: Approximately 70% of Minnesota's irrigation is with center pivot distribution systems whose diagnostic appearance on remotely sensed imagery is a circular pattern which can be readily identified on LANDSAT MSS band imagery. Fields irrigated with traveling guns, laterals, booms, or cornering systems either result in angular field patterns or obscure the circular patterns normally visible on imagery. The IDMS system at Goddard was used to develop a LANDSAT digital classification of the Sherburne County area, which located fields regardless of shape, and was not dependent of visual interpretation. Ground truth collection and classification attempts are described in an effort to inventory all wells in the area.

Description: The Maryland Automated Geographic Information System is described as well as the development of a general land cover classification with level 2 separation for vegetation categories for a 95,000-acre study area in Howard and Anne Arundel Counties. An accuracy analysis was performed on two subsections of the entire study area. The 1:24,000 scale land use map and the high in altitude infrared photography were determined to the best source of ground truth for the analysis. Results show that (1) delineation of deciduous and coniferous forested areas from LANDSAT data compared well with results from infrared photography; (2) general classification of agricultural areas showed acceptable results; (3) delineation of residential areas had the highest error rates (difference in interpretation and cover type assignment methods was a primary factor); and (4) LANDSAT-derived land cover data is to be used as an ancillary data source in a Maryland statewide land cover inventory.

Description: The states encompassed by the Western Regional Applications Program (WRAP) include Alaska, Arizona, California, Colorado, Hawaii, Idaho, Montana, Nevada, North Dakota, Oregon, South Dakota, Utah, Washington, and Wyoming. The features of the western United States which both help and hinder the use of LANDSAT are discussed as well as their effects on the institutional approaches used for resources management in these states. Operational alternatives and some of the representative LANDSAT projects that WRAP is engaged in are presented.

Description: The goals of the Eastern Regional Remote Sensing Applications Program are to establish capability for using LANDSAT technology in state institutions and organizations in an operational mode, and to assist in handling new data, introducing new techniques as they become available, and in building and nurturing the technology within the states. Techniques for application development are supported and workshops and demonstrations are provided to pass information on to users. Major areas of project interest are forest inventory, water inventory, and water clarity, and land cover change detection. Another activity is in adopting software, modifying it to work on users' computers, and in identifying hardware that can be used and tied to user computer systems. Involvement of universities as resources for state and local governments is another element of the program.

Description: The approach to the transfer of satellite remote sensing technology used at the National Space Technology Laboratories'/Earth Resources Laboratory represents an effective program for the assigned area and is composed of demonstrations; a comprehensive in-house training program; user awareness activities (brochures, slide sets, and documentation); university short courses to stimulate university capabilities; and a technical awareness effort aimed at providing the states with consultation in the areas of hardware/software systems and advice on specific applications. Particular focus is on the transfer of LANDSAT technology in the context of geobased information system development, as well as on how the states approach the problem of institutionalizing the capabilities. The status of demonstration projects and of the state LANDSAT geographic information systems is examined.

Description: The Council of State Planning Agencies, in consultation with the National Governor's Association and NASA, initiated the Earth Resources Data Project to encourage the appropriate application of cost-effective science and technology to state natural resources issues and problems. This project was established to provide a focal point for identifying those issues associated with state use of remote sensing and related technology. One project goal is to elevate to the consciousness of state policy and program officials new technologies, such as LANDSAT, by association with major issues to which policy officials are attuned. The project assists the coordination between the states and NASA and promotes communication on those issues. A related project objective is to encourage technical assistance opportunities for states that will promote better use of remote sensing and natural resources data in state programs.

Description: A university project to develop land cover classification capabilities is discussed. Specific objectives were to: (1) demonstrate the feasibility of using LANDSAT data for resource management; (2) establish projects and meet state needs for specific resource information; and (3) assist state personnel in obtaining technical expertise in the processing and analysis of LANDSAT data.

Description: The data needs questionnaire is an element in the project design study for the Michigan Resource Inventory Act and is aimed at gathering information on what inventory information is required by land use planners throughout the state. Analysis of questionnaire responses is discussed. Some information on current use categories was tabulated. The respondents selected a broad range of categories at all levels of detail. Those most frequently indicated were urban categories.

Description: The University of Vermont's remote sensing applications program is described. System capabilities include digital image processing and conventional photographic interpretation. Its expressed purpose is the identification of practical applications of remotely sensed data and its encouraged use in Earth resource management.

Description: The testing of LANDSAT applicability to urban and agricultural land use analysis at the substate level is described. It is concluded that the LANDSAT system has a place in Vermont and places like it, but that the present operation is inadequate and the need for technology transfer and excellent communication between the producers and users is fundamental to the future of the system and for the realization of benefit from the investment.

Description: The establishment of a limited spatial data base for the U.S. eastern seaboard vicinity is discussed along with the demonstration of computer assisted analysis techniques for investigating spatial patterns and relationships among ship survey data and remotely sensed sea surface temperature. Ship survey variables included concentrations of two zooplankton, two icthyoplankton, and two fish species, in addition to physical data of depth to bottom and surface and bottom water temperatures. Continuous spatial distributions of these data were created by both weighted nearest neighbor and iterative smoothing interpolation techniques. Maps of surface water temperature were created by digitizing GOES satellite images. All mapped data were spatially registered by conversion of latitude and longitude coordinates to rotated Lambert conic conformal rectilinear coordinates and stored in grid format of approximately one hundred square kilometers per cell. The analysis of these data include the generation of statistical summaries and maps describing the joint occurrence among variables.

Description: The problems involved in satellite remote sensing of coastal zones are examined. The differences between remote sensing of terrestrial regions and remote sensing of open ocean areas are reviewed. The associate ranges of time and spatial scales and spectral and radiometric resolution are considered. It is concluded that, in general remote sensing of the coastal region is more appropriately performed with aircraft.

Description: In order to comply with the Federal Clean Water Act and, in so doing, develop a procedure to periodically update the classification, the State of Vermont evaluated the ability of LANDSAT to detect general water quality and specific water quality parameters in Vermont lakes. Unsupervised and supervised classifications as well as regression analyses were used to examine LANDSAT data from Lake Champlain and from four small nearby lakes. Unsupervised and supervised classifications were found to be of somewhat limited value. Regression analyses revealed a good correlation between depth-integrated total phosphorus concentrations and LANDSAT band 4 data (r2= 0.92) and between Secchi disk transparencies and LANDSAT band 4 data (r2 - 0.85). No correlation was found between depth-integrated chlorophyll-a samples and LANDSAT data. Vermont is expanding this LANDSAT evaluation to include the remaining lakes in the state greater than twenty acres and steps are being taken to incorporate LANDSAT into the state's ongoing water quality monitoring programs.

Description: The usefulness of LANDSAT in classifying land cover and in identifying and classifying land use change was investigated using an urbanizing area as the study area. The question of what was the best technique for classification was the primary focus of the study. The many computer-assisted techniques available to analyze LANDSAT data were evaluated. Techniques of statistical training (polygons from CRT, unsupervised clustering, polygons from digitizer and binary masks) were tested with minimum distance to the mean, maximum likelihood and canonical analysis with minimum distance to the mean classifiers. The twelve output images were compared to photointerpreted samples, ground verified samples and a current land use data base. Results indicate that for a reconnaissance inventory, the unsupervised training with canonical analysis-minimum distance classifier is the most efficient. If more detailed ground truth and ground verification is available, the polygons from the digitizer training with the canonical analysis minimum distance is more accurate.

Description: A brief history of events which led to the formal implementation of LANDSAT technology in Virginia is outlined. The concept of the Commonwealth Data Base (CDB) is explained as it is perceived by the users and the systems development task force. Furthermore, the CDB organization which was established to implement the CDB concept in Virginia is covered.

Description: Problems involved in establishing a LANDSAT image processing capability are discussed. Cost estimates and tradeoffs, association with geographic information systems, and hardware and software requirements are addressed.

Description: The projects, faculty, and computer resources involved in remote sensing research at the University of Massachusetts are discussed. Field instrumentation and technology transfers from other disciplines are also described.

Description: The integration of LANDSAT data was achieved through the development of a flexible, compatible analysis tool and using an existing data base to select the usable data from a LANDSAT analysis. The software package allows manipulation of grid cell data plus the flexibility to allow the user to include FORTRAN statements for special functions. Using this combination of capabilities the user can classify a LANDSAT image and then selectivity merge the results with other data that may exist for the study area.

Description: Analytical procedures common to most computer-oriented geographic information systems are composed of fundamental map processing operations. A conceptual framework for such procedures is developed and basic operations common to a broad range of applications are described. Among the major classes of primitive operations identified are those associated with: reclassifying map categories as a function of the initial classification, the shape, the position, or the size of the spatial configuration associated with each category; overlaying maps on a point-by-point, a category-wide, or a map-wide basis; measuring distance; establishing visual or optimal path connectivity; and characterizing cartographic neighborhoods based on the thematic or spatial attributes of the data values within each neighborhood. By organizing such operations in a coherent manner, the basis for a generalized cartographic modeling structure can be developed which accommodates a variety of needs in a common, flexible and intuitive manner. The use of each is limited only by the general thematic and spatial nature of the data to which it is applied.

Description: A wetlands monitoring study was initiated as part of Delaware's LANDSAT applications demonstration project. Classifications of digital data are conducted in an effort to determine the location and acreage of wetlands loss or gain, species conversion, and application for the inventory and typing of freshwater wetlands. A multi-seasonal approach is employed to compare data from two different years. Unsupervised classifications were conducted for two of the four dates examined. Initial results indicate the multi-seasonal approach allows much better separation of wetland types for both tidal and non-tidal wetlands than either season alone. Change detection is possible but generally misses the small acreages now impacted by man.

Description: An irrigation ground water use inventory in Sherburne County, Minnesota, was attempted by indirectly locating irrigation wells by determining the location of irrigated lands. Digital classification of LANDSAT MSS imagery was employed using the IDIMS at Goddard Space Flight Center. Single-date classification proved moderately successful after accurate ground truth data were obtained. A combination of supervised and unsupervised classification was used. Multitemporal analysis using August 10 and May 21, 1978 imagery was also attempted. This unsupervised classification proved most successful in identifying crops and irrigated fields.

Description: A cooperative program between the Wisconsin Department of Natural Resources and the University of Wisconsin-Madison resulted in the assessment of the trophic condition of approximately 3,000 significant inland lakes in Wisconsin. The feasibility of using both photographic and digital representations of LANDSAT multispectral scanner data for lake classification was investigated. The result was the development of a nearly automated system which, with minimal human interaction, locates and extracts the lake data, then corrects the data for atmospheric effects, and finally classifies all the significant lakes in the state as to trophic condition.

Description: Additions to the ORSER remote sensing data processing package are described. The ORSER package consists of about 35 individual programs that are grouped into preprocessing, data analysis, and display subsystems. Additional data formats and data management, data transformation, and geometric correlation programs were supplemented to the preprocessing subsystem. Enhancements to the data analysis techniques include a maximum likelihood classifier (MAXCLASS) and a new version of the STATS program which makes delineation of training areas easier and allows for detection of outlier points. Ongoing developments are also described.

Description: The use of LANDSAT for water resources applications in U.S. state demonstration projects is reviewed. The most common single application undertaken between 1976 and 1981 was found to be water condition assessment. The majority of projects, however, fell into the general category of watershed hydrology. Some of the states are attempting to use LANDSAT data in an operational mode for water quality assessment. Two of these state projects from Vermont and Wisconsin are described in brief. The basic information requirements of Section 314 of the U.S. Pollution Control Act are given with the type of input LANDSAT data could potentially provide toward those requirements. Surveys were performed to determine: (1) how its states were responding in 1980 to 1981 to the federal and state water quality laws; and (2) the status of LANDSAT analysis capabilities of each state.

Description: LANDSAT data from July 1973 and June 1978 for the Patuxent River Watershed of Maryland were processed in an effort to devise an economical method of monitoring the reclamation of sand and gravel pits. ASTEP-II and IDIMS software were utilized to derive signatures for sand and gravel pits and other land use/land cover types. Both unsupervised and supervised classifications of the two data sets were produced. Resultant statistics and color output products were compared in order to determine the extent of reclamation and expansion of sand and gravel pits over the five-year time span and to check the locations of more recent sand and gravel pits. Preliminary results indicate that, for a selected northern sub-acre, signatures derived for sand and gravel pits were nearly 90 percent accurate.

Description: Strip and contour mining techniques are reviewed as well as some studies conducted to determine the applicability of LANDSAT and associated digital image processing techniques to the surficial problems associated with mining operations. A nontraditional unsupervised classification approach to multispectral data is considered which renders increased classification separability in land cover analysis of surface mined areas. The approach also reduces the dimensionality of the data and requires only minimal analytical skills in digital data processing.

Description: Because of the size of the Pocomoke River Basin, the inaccessibility of certain areas, and study time constraints, several remote sensing techniques were used to collect base information on the river corridor, (a 23.2 km channel) and on a 1.2 km wooded floodplain. This information provided an adequate understanding of the environment and its resources, thus enabling effective management options to be designed. The remote sensing techniques used for assessment included manual analysis of high altitude color-infrared photography, computer-assisted analysis of LANDSAT-2 imagery, and the application of airborne oceanographic Lidar for topographic mapping. Results show that each techniques was valuable in providing the needed base data necessary for resource planning.

Description: The utility of LANDSAT data in monitoring largescale land clearance and drainage activities in a forest/wetland environment in northern Minnesota was investigated. LANDSAT tapes from 1973, 1978 and 1980 were used in a multitemporal unsupervised land cover classification of the 9 x 15 mile site. Results show quite clearly and in a cost-effective manner, where the greatest activity occurred. It was also possible to integrate the LANDSAT data with other data available through the Land Management Information Center's geographic information system.