ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • oxidation  (96)
  • Springer  (96)
  • American Meteorological Society
  • 1995-1999  (96)
  • 1990-1994
  • 1955-1959
  • 1999  (47)
  • 1996  (49)
Collection
Publisher
Years
  • 1995-1999  (96)
  • 1990-1994
  • 1955-1959
Year
  • 1
    ISSN: 1572-8773
    Keywords: acidophilic ; strain ; oxidation ; kinetics
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology , Chemistry and Pharmacology
    Notes: Abstract Recovery of metal values from sulfide ores by use of acidophilic microorganisms is gaining importance. A number of commercial/pilot plants are setup to find out the techno-economic feasibility of the overall process. The main drawback in the process is the slow kinetics of dissolution of metal values from the sulfide ores. To make the technology e attractive the kinetics should be improved considerably. There are various factors which determine the overall kinetics such as bacterial activity and concentration, iron and sulfur oxidation, oxygen consumption, reactor design and nature of ore. A brief review has been made dealing with the above parameters
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 2
    Electronic Resource
    Electronic Resource
    Springer
    Catalysis letters 37 (1996), S. 213-216 
    ISSN: 1572-879X
    Keywords: titanium silicalites ; oxidation ; amines ; hydrogen peroxide
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Titanium silicalite molecular sieves, TS-1 and TS-2 having MFI and MEL structures, respectively, catalyze the oxidation of secondary amines to the corresponding hydroxylamines using hydrogen peroxide as the oxidant. Higher concentrations of H2O2 lead to further oxidation of hydroxylamine to nitrone. Diffuse reflectance spectroscopy shows the formation of a titanium peroxo complex upon addition of hydrogen peroxide to the TS-1 catalyst. The titanium peroxo complex oxidizes the substrate and reforms to a titanyl group.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 3
    ISSN: 1572-879X
    Keywords: oxidation ; cyclohexene ; polyoxometalate-intercalated hydrotalcite
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Cyclohexene was oxidized with molecular oxygen over transition-metal-substituted polyoxometalate-intercalated hydrotalcites to produce 2-cyclohexene-1-one and 2-cyclohexene-1-ol with high selectivity under mild reaction conditions.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 4
    ISSN: 1572-879X
    Keywords: palladium metal ; oxidation ; toxic organics
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract In water, metallic palladium was found to catalyze the deep oxidation of a wide variety of functional organics by dioxygen at 80–90°C in the presence of carbon monoxide. Several classes of organic compounds were examined: benzene, phenol and substituted phenols, aliphatic and aromatic halogenated compounds, organophosphorus, and organosulfur compounds. In every case, deep oxidation to carbon monoxide, carbon dioxide, and water occurred in high yields, resulting in up to several hundred turnovers over a 24 h period. Since the heterogeneous catalyst can be removed by simple filtration, simultaneous water purification and contaminant destruction becomes feasible. For those substrates that are insoluble in pure water, a mixture of water and perfluorobutyric acid was successfully employed as the solvent.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 5
    ISSN: 1572-879X
    Keywords: propane ; oxidation ; calcium-based catalysts ; tetrachloromethane
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The oxidation of propane has been investigated in the presence and absence of tetrachloromethane (TCM) on calcium hydroxyapatite (CaHAp), Ca3(PO4)2, CaSO4 and CaO at 723 K. In the absence of TCM, the conversion of C3H8 on CaHAp was 7.7–9.2% during 6 h on-stream while that on Ca3(PO4)2, CaSO4 and CaO was 0.6, 0 and 0.2–0.4%, respectively. The principal products on all catalysts in the absence of TCM were CO and CO2 with small selectivities to C3H6 and C2H4 (both 5–6%) observed on CaHAp. Upon addition of TCM, the selectivity to C3H6 on all catalysts and the conversion of C3H8 on CaSO4 increased while, with increasing time-on-stream, the changes in the conversion and selectivity were dependent upon the nature of the catalysts. XPS and XRD analyses provide evidence for the presence of chlorine in the surface and/or bulk of three of the catalysts, suggesting that chlorinated species on the solids play a role in the selectivity enhancement, but the absence of chlorine from the sulphate demonstrates the dissimilarities of the catalysts in their abilities to sorb and decompose TCM.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 6
    ISSN: 1572-879X
    Keywords: methane ; oxidation ; strontium hydroxyapatite ; lead hydroxyapatite ; tetrachloromethane
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The oxidation of methane has been investigated on lead hydroxyapatite (PbHAp), strontium hydroxyapatite (SrHAp) and their binary mixtures at 873 K. PbHAp showed no activity for the oxidation of methane, while SrHAp produced carbon monoxide selectively at 2–4% conversion. On binary mixtures of the hydroxyapatites the conversion of methane and the selectivity to C2 compounds reached values higher than those of the separate constituents of the mixture. With tetrachloromethane in the feed stream a similar synergistic effect was observed with conversions of methane and selectivities to CH3Cl higher on the binary mixtures than those on either SrHAp or PbHAp. The strontium-containing hydroxyapatite appears to play a crucial role in the activation of methane, while the presence of the lead-containing analogue is apparently required for the minimization of undesirable processes involving methyl radicals.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 7
    Electronic Resource
    Electronic Resource
    Springer
    Catalysis surveys from Japan 3 (1999), S. 55-60 
    ISSN: 1572-8803
    Keywords: acetic acid ; oxidation ; Pd ; heteropoly acid ; ethylene
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract A new process for acetic acid production by direct oxidation of ethylene which was established and commercialized is described. The catalyst system consisting of Pd and heteropoly acid exhibits excellent activity and selectivity. The addition of Se or Te to the catalyst system is effective to suppress the formation of carbon dioxide. This new process is applicable to a plant of a wide range of size corresponding to the local demand. Because this new process produces little waste water, it is very friendly to the environment.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 8
    ISSN: 1572-879X
    Keywords: perovskite ; La1−xSrxFeO3−δ ; dehydrogenation ; oxidation ; ethane
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Catalysts of the composition La1−xSrxFeO3−δ, 0⩽x ⩽1, have been tested for the oxidative dehydrogenation of ethane in the temperature range 300–800°C. The catalyst is active above 400°C, giving a maximum yield of 37% ethylene at 650°C. Above 650°C, synthesis gas was formed together with methane, suggesting that the reforming reaction and thermal cracking of ethane took place. The catalytic data are compared to conductivity measurements on the same material, and a good correlation between the activity and p-type conductivity has been found. In the phase diagram for the system LaFeO3-SrFeO3−δ, a phase separation to two types of (La, Sr)FeO3−δ perovskites was observed in the La/Sr binary composition in the temperature range below 800°C. The phase separation can elucidate the dependency of the catalytic activity on its p-type conductivity.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 9
    Electronic Resource
    Electronic Resource
    Springer
    Catalysis letters 39 (1996), S. 205-208 
    ISSN: 1572-879X
    Keywords: oxidation ; hydroxyapatite ; carbon monoxide ; inhibition ; tetrachloromethane
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The introduction of tetrachloromethane (TCM) into the feedstream of CO and O2 inhibits the formation of CO2 on hydroxyapatite. TCM interacts with the surface of hydroxyapatite to form its chlorinated analogue, chlorapatite, which suppresses the oxidation of CO to CO2. Thus, in the oxidative coupling of methane the beneficial effects of the addition of TCM to the feedstream result, at least in part, from the suppression of the further oxidation of CO.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 10
    Electronic Resource
    Electronic Resource
    Springer
    Catalysis letters 57 (1999), S. 109-113 
    ISSN: 1572-879X
    Keywords: superacid ; zirconia ; molybdenum oxide ; methane ; oxidation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract A series of zirconia-supported molybdenum oxide catalysts with different molybdenum loadings prepared using conditions reported to generate “superacidity” have been evaluated for their performance as catalysts for methane oxidation. A marked dependence of Mo content on activity has been observed, with the most active material being that with intermediate molybdenum content. 5 wt% MoO3/ZrO2 compares favourably with ZrxCe1-xO2 for methane combustion. The presence of MoO3 is observed to stabilise the tetragonal polymorph of ZrO2 and, as Mo content is increased, dispersed MoO3 crystallites are formed as evidenced by Raman spectroscopy. Temperature-programmed reduction studies evidence differences in the reduction behaviour of the materials as a function of loading. The results indicate that molybdenum oxide supported on monoclinic zirconia gives rise to the most active catalyst. It is tentatively suggested that the formation of a MoO3 monolayer during reaction may be of importance.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 11
    Electronic Resource
    Electronic Resource
    Springer
    Catalysis letters 37 (1996), S. 79-87 
    ISSN: 1572-879X
    Keywords: methanol ; oxidation ; copper ; electron spectroscopy
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The role of preadsorbed oxygen present at Cu(111), Cu(110) and polycrystalline surfaces in the oxidation of methanol has been investigated by X-ray and electron energy loss spectroscopies. In addition to the well established formation of methoxy species and its subsequent decomposition and desorption as formaldehyde, a second reaction pathway to surface formate is present. The latter is temperature dependent being undetectable at 260 K at a polycrystalline surface but occurs at a significant rate at 295 K and above. The limitations of experimental data for methanol oxidation by temperature programmed desorption and molecular beam techniques are discussed.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 12
    ISSN: 1572-879X
    Keywords: synergistic effect ; carbon monoxide ; oxidation ; mixed oxides ; iron oxide ; tin oxide ; manganese oxide
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Based on the comparative evaluation of the catalytic activity of Fe2O3, Mn2O3 and SnO2 and their mixed oxides (Fe2O3+SnO2) and (Mn2O3+SnO2), it is shown that the system (Mn2O3+SnO2) shows strong synergistic effects during CO oxidation reaction. Such effects are not observed for the analogous system (Fe2O3+SnO2). Based on the calcination and reduction behaviour of these two mixed oxide systems and the redox potentials of the involved cations, the possible reasons for the observance of synergistic effects for the (Mn2O3+SnO2) system are discussed.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 13
    ISSN: 1572-879X
    Keywords: non-uniform surface ; kinetics ; ethanol ; oxidation ; molybdenum oxide
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Temkin's theory of rates of catalytic reactions on non-uniform surfaces is extended to the MoO3-catalyzed oxidation of ethanol to acetaldehyde. Two types of sites are assumed to be present, an oxygen atom site that can be modeled with uniform properties and a metal atom site characterized by non-uniform properties both for ethanol chemisorption to an ethoxide intermediate and the conversion of this intermediate to acetaldehyde. The rate-limiting step is the cleavage of a C-H bond in the absorbed ethoxide intermediate. Non-uniform surface kinetics leads to a kinetic rate expression of the form $$v = kP_{C_2 H_5 OH}^{1 - m} P_{O_2 }^{(1 - m)/4} P_{H_2 O}^{ - (1 - m)/2} $$ . Such a rate expression, withm=0.14, is shown to provide a good fit to kinetic data for the selective oxidation of ethanol on a silica supported molybdenum oxide catalyst.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 14
    Electronic Resource
    Electronic Resource
    Springer
    Catalysis letters 40 (1996), S. 47-50 
    ISSN: 1572-879X
    Keywords: Baeyer-Villiger ; titanium silicate molecular sieve ; oxidation ; rearrangement ; titanium peroxo ; triphase
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Titanium silicate molecular sieve TS-1 has been found to be an efficient catalyst for Baeyer-Villiger (BV) oxidation of cyclic and aromatic ketones under triphase conditions (solid catalyst along with two immiscible liquid reactants in the absence of any cosolvent), using dilute H2O2. Reactions studied are the oxidation of cyclohexanone and acetophenone. Whereas in the case of cyclohexane,ε-caprolactone, a BV product along with hydroxy and diketones is formed, in the case of acetophenone, phenyl acetate, a BV product along witho- andp-hydroxyacetophenone is formed. The acidic nature of titanium peroxo species, stabilised by water, is proposed to be responsible for such reactions under triphasic reaction conditions.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 15
    Electronic Resource
    Electronic Resource
    Springer
    Catalysis letters 36 (1996), S. 31-36 
    ISSN: 1572-879X
    Keywords: ethanol ; kinetics ; oxidation ; oxydehydrogenation ; platinum ; structure sensitivity
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The effect of the platinum particle size was investigated for the catalytic oxidative dehydrogenation of aqueous ethanol to ethanal at a temperature of 303 K, an ethanol concentration of 260 mol m−3, a partial oxygen pressure 60 kPa, a pH of 9, and an ethanal and ethanoate concentration of 20 mol m−3. A particle size effect on the turnover frequency was observed but only for particle sizes smaller than 2 nm. Hence, the reaction shows a limited structure sensitivity.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 16
    ISSN: 1572-879X
    Keywords: oxidation ; metalloporphyrins ; hydroperoxide decomposition
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract A new family of metalloporphyrin complexes having perfluoroalkyl groups in the meso-positions of the ring are active catalysts for the oxidation of isobutane to tert-butyl alcohol, TBA, and for the decomposition of tert-butyl hydroperoxide to TBA. This discovery extends the limited number of meso-substituents that can be used to enhance catalytic activity and fits the postulate that groups that withdraw electrons from the porphyrin periphery give rise to active catalysts for alkane oxidation. The perfluoroalkyl groups also confer oxidative stability, hydrophobicity and lower cost to the catalyst.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 17
    Electronic Resource
    Electronic Resource
    Springer
    Catalysis surveys from Japan 3 (1999), S. 27-35 
    ISSN: 1572-8803
    Keywords: oxidation ; oxygen ; alkane ; N‐hydroxyphthalimide ; radical catalyst
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract A practical catalytic method to convert alkanes into the corresponding oxygen‐containing compounds with O2 under mild conditions using N‐hydroxyphthalimide (NHPI) in the presence or absence of a transition metal was developed. Thus, cyclohexane was successfully converted into adipic acid in good conversion and selectivity by a combined catalytic system consisting of NHPI and Mn(acac)2. Lower alkane such as isobutane was converted into t‐butyl alcohol (83%) under 10 atm of air by NHPI‐Co(OAc)2 system. Alkylbenzene such as toluene was oxidized to benzoic acid in high yield (81%) under normal temperature and pressure of dioxygen in the presence of a catalytic amount of NHPI and Co(OAc)2. ESR measurements showed that phthalimide‐N‐oxyl generated from NHPI under dioxygen atmosphere is a key species in this oxidation and functions as a radical catalyst.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 18
    Electronic Resource
    Electronic Resource
    Springer
    Journal of solid state electrochemistry 3 (1999), S. 179-186 
    ISSN: 1433-0768
    Keywords: Key words Cathodic protection system ; Carbon ; oxidation ; Composite carbon/polymer anode ; Lifetime
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The suitability of a polymeric composite material for use as part of an anode structure in a cathodic protection system has been examined. The composite material was a conductive blend (volume resistivity typically 1.5 Ω cm) of carbon black in a polyethylene binder. A long operational lifetime for the material demands that the rate of carbon loss must be low. In the work reported here, electrochemical and in situ analytical techniques were employed to characterise the performance of the material over a wide range of anodic current densities in a variety of aqueous electrolytes. The predominant anodic electrochemical reaction on the polymeric material is CO2 formation in acid and neutral solutions, which causes loss of carbon from the surface and the development of a non-conducting layer of polyethylene. The characteristics of the reaction suggest that it occurs via the discharge of H2O. In alkaline pH, however, the anodic reactions are more complex. A high OH− concentration (pH 12 or higher) favours the formation of oxygen rather than CO2, particularly at low anodic potentials. The presence of CO3 2− in the electrolyte catalyses the evolution of oxygen at pH values as low as 9. The electrochemical formation of oxygen always occurs in parallel with the generation of some humic acid in the solution.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 19
    ISSN: 1432-072X
    Keywords: Key words Fumarase ; Syntrophy ; Propionate ; oxidation ; Fumarate fermentation ; Anaerobic oxidation ; Iron-sulfur cluster
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Abstract Fumarase from the syntrophic propionate-oxidizing bacterium strain MPOB was purified 130-fold under anoxic conditions. The native enzyme had an apparent molecular mass of 114 kDa and was composed of two subunits of 60 kDa. The enzyme exhibited maximum activity at pH 8.5 and approximately 54° C. The K m values for fumarate and l-malate were 0.25 mM and 2.38 mM, respectively. Fumarase was inactivated by oxygen, but the activity could be restored by addition of Fe2+ and β-mercaptoethanol under anoxic conditions. EPR spectroscopy of the purified enzyme revealed the presence of a [3Fe-4S] cluster. Under reducing conditions, only a trace amount of a [4Fe-4S] cluster was detected. Addition of fumarate resulted in a significant increase of this [4Fe-4S] signal. The N-terminal amino acid sequence showed similarity to the sequences of fumarase A and B of Escherichia coli (56%) and fumarase A of Salmonella typhimurium (63%).
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 20
    ISSN: 1432-072X
    Keywords: Key words Heterologous expression ; Methane ; oxidation ; Methane monooxygenase ; Methanotroph ; Regulation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Abstract The methanotrophs Methylococcus capsulatus (Bath) and Methylosinus trichosporium OB3b contain particulate methane monooxygenase (pMMO) and soluble methane monooxygenase (sMMO) genes. Other methanotrophs such as Methylomicrobium album BG8 and Methylocystis parvus OBBP contain only pMMO genes. Although molecular genetic techniques are poorly developed in methanotrophs, sMMO genes were expressed in methanotrophs normally containing only pMMO genes. This was achieved by conjugation using broad-host-range plasmids containing the native promoter and sMMO genes from Mc. capsulatus (Bath) and Ms. trichosporium OB3b. sMMO genes derived from Ms. trichosporium OB3b were expressed in an active form in Mcy. parvus OBBP and in Mm. album BG8. Therefore, all of the genes required for active sMMO synthesis were contained on the broad-host-range plasmids and were expressed in the heterologous hosts. Constitutive synthesis of pMMO was observed in Mm. album BG8 when grown at high and low copper-to-biomass ratios, while transcription of the recombinant sMMO genes was only observed under growth conditions of low copper-to-biomass ratios. Therefore, the regulatory protein(s) for sMMO synthesis was also present on the plasmid used, or the heterologous host contained a regulatory system for sMMO. Expression of sMMO genes in methanotrophs containing only pMMO will assist further investigations on the expression and regulation of MMO genes in methanotrophs.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 21
    Electronic Resource
    Electronic Resource
    Springer
    Journal of thermal analysis and calorimetry 57 (1999), S. 875-881 
    ISSN: 1572-8943
    Keywords: charge transfer ; Kelvin probe ; oxidation ; work function ; zirconia
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The extent of the surface charge, that develops during oxidation of zirconia, is determined using work function measurements for both bulk specimen and thin films. The bulk specimen of yttria-doped zirconia (10 mol%) exhibits maxima of the surface electrical effect at 373 and 973 K (130 and 280 mV, respectively) that can be considered in terms of oxygen chemisorption and oxygen non-stoichiometry. Thin film of undoped zirconia exhibits a maximum at 473 K (260 eV). Addition of yttria (10 mol%) to the thin film results in a substantial reduction of the maximum, to about 140 eV, that is shifted up to 600 K.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 22
    Electronic Resource
    Electronic Resource
    Springer
    Journal of thermal analysis and calorimetry 46 (1996), S. 1657-1669 
    ISSN: 1572-8943
    Keywords: activation energy ; combustion ; differential scanning calorimetry ; kinetics ; lignite ; oxidation ; thermogravimetric analysis
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Thermal analysis increasingly being used to obtain kinetic data relating to sample decomposition. This work involves a comparative study of several methods used to analyse DSC and TG/DTG data obtained on the oxidation of Beypazari lignite. A general computer program was developed and the methods are compared with regard to their accuracy and the ease of interpretation of the kinetics of thermal decomposition. For this study, the ratio method was regarded as the preferred method, because it permits the estimation of reaction order, activation energy and Arrhenius constant simultaneously from a single experiment.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 23
    Electronic Resource
    Electronic Resource
    Springer
    Journal of thermal analysis and calorimetry 57 (1999), S. 473-486 
    ISSN: 1572-8943
    Keywords: cumene ; oxidation ; polymerization ; quinone-amine inhibitors ; solution microcalorimetry ; styrene
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The application of solution microcalorimetry was demonstrated on two model examples – inhibited oxidation of cumene and radical polymerization of styrene. From the experimental dependences of the rate of heat release on time, the rate constants k 7 of the interaction of an inhibitor with radicals of substrate (RO 2 . or R.) in oxidation or in polymerization were determined for the set of inhibitors of N-aryl N-(2-quinone) amine series. It was shown that these compounds are weak inhibitors of oxidation of cumene and rather efficient inhibitor of polymerization of styrene.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 24
    Electronic Resource
    Electronic Resource
    Springer
    Plasma chemistry and plasma processing 19 (1999), S. 131-151 
    ISSN: 1572-8986
    Keywords: Styrene ; oxidation ; silent discharge ; plasma ; dielectric barrier
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Technology
    Notes: Abstract A silent discharge plasma reactor has been developed to study the oxidation of styrene vapor in argon/oxygen mixtures. A number of analytical techniques were employed to determine the destruction efficiency and to characterize the intermediate products. The destruction efficiency was measured as a function of initial styrene concentration, temperature, and energy density of the plasma. The formation of solid products was observed in most experiments. At low temperature (100°C), the solid deposit was polymeric in nature, while at high temperature (300°C) the solid appeared to be amorphous carbon. A combination of high temperature and high energy density resulted in high destruction efficiency and minimal production of solid films. The destruction efficiency vs. energy density is shown to be more complex than a simple model predicting exponential behavior. Several reasons for the discrepancy are suggested. The “e-folding” energy density for the destruction of styrene is compared to literature values for other organic compounds, measured using similar types of plasma reactors.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 25
    Electronic Resource
    Electronic Resource
    Springer
    Plasma chemistry and plasma processing 19 (1999), S. 383-394 
    ISSN: 1572-8986
    Keywords: Nonthermal plasma ; benzene ; Al2O3 ; BaTiO3 ; oxidation ; absorption ; atmospheric pressure
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Technology
    Notes: Abstract The combination of plasma discharge and adsorption was examined for oxidation of dilute benzene in air in a plasma reactor packed with a mixture of BaTiO 3 pellets and porous Al 2 O 3 pellets (i.e., an alumina hybrid reactor). The oxidative decomposition of benzene was enhanced by the benzene concentrating on the Al 2 O 3 pellets. Furthermore, there was a higher selectivity to CO 2 in the products from the hybrid than from a plasma reactor packed with BaTiO 3 pellets alone. The presence of the Al 2 O 3 pellets suppressed the formation of N 2 O.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 26
    Electronic Resource
    Electronic Resource
    Springer
    Plasma chemistry and plasma processing 19 (1999), S. 421-443 
    ISSN: 1572-8986
    Keywords: Streamer corona ; NO x removal ; nonthermal plasma ; oxidation ; reduction
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Technology
    Notes: Abstract In this paper, the NO-to-NO 2 conversion in various gaseous mixtures is experimentally investigated. Streamer coronas are produced with a dc-superimposed high-frequency ac power supply (10–60 kHz). According to NO x removal experiments in N 2 +NO x and N 2 +O 2 +NO x gaseous mixtures, it is supposed that the reverse reaction NO 2 +O→NO+O 2 may not only limit NO 2 production in N 2 +NO x mixtures, but also increase the energy cost for NO removal. Oxygen could significantly suppress reduction reactions and enhance oxidation processes. The reduction reactions, such as N+NO→N 2 +O, induce negligible NO removal provided the O 2 concentration is larger than 3.6%. With adding H 2 O into the reactor, the produced NO 2 per unit removed NO can be significantly reduced due to NO 2 oxidation. NH 3 injection could also significantly decrease the produced NO 2 via NH and NH 2 - related reduction reactions. Almost 100% of NO 2 can be removed in gaseous mixtures of N 2 +O 2 +H 2 O+NO 2 with negligible NO production.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 27
    ISSN: 1573-4889
    Keywords: dilute alloys ; oxidation ; Wagner-Hauffe rule
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract Concerning the parabolic oxidation of alloys with a low content of a different valence element, we show that the Wagner-Hauffe valence approach contains some inaccuracies. This paper is devoted to the growth of an oxide MO with metal excess or oxygen deficit. The analytical processing consists in solving the differential equation connecting the point defect flux to the oxygen pressure. This equation has been solved analytically in the case where the foreign-element concentration is very high compared to that of the point defects in the pure oxide. On this assumption with a lower-valence dopant, as long as the oxide conductivity remains essentially electronic, the oxidation is limited only by the transport of ionic defects across the scale under the electric-potential gradient. Moreover, an increase of the dopant concentration may lead to an oxide exhibiting partial ionic conductivity. Consequently, the parabolic constant variations as a function of the dopant concentration is not monotonic, contrary to results published before. With a higher-valence dopant, the conductivity always remains electronic, and this result agrees with predictions based on the Wagner Hauffe approach, though the demonstrations are fundamentally different.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 28
    ISSN: 1573-4889
    Keywords: oxidation ; copper ; Li-doped copper ; Cr-doped copper ; short-circuiting ; Mott's parabola ; Wagner's parabola
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The influence of shorting circuitry attachment between metal-oxide and oxideoxygen interfaces on the oxidation kinetics of copper, lithium-doped copper (Li: 400 ppm), and chromium-doped copper (Cr: 12 ppm) have been studied in dry air $$(P_{O_2 } = 21.27kPa)$$ in the temperature range of 523–1073 K. Oxide film or scale growth under short-circuiting as well as under normal oxidation conditions conforms to the parabolic rate law. The oxidation kinetics under short-circuiting resulted in decreased rates for Cu and Li-doped Cu up to a temperature of 773 K, while Cr-doped Cu exhibited an enhancement in rate compared to its normal oxidation in the same temperature range. However, above 873 K, all three systems under shorting circuitry attachment exhibited enhanced rates compared to their normal oxidation rates in conformity to the existing theoretical model. Use of additional resistances in series in the outer short-circuit Pt path have clearly established that below 773 K Mott's fieldinduced migration plays the most important role, while at elevated temperatures Wagner's electrochemical potential-gradient factor acts as the main driving force in the scale-growth process. The results have been interpreted on the basis of average defect concentration, the electrochemical potential gradient, electrical field gradient, and transport coefficient in the Cu2O layer.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 29
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 46 (1996), S. 109-127 
    ISSN: 1573-4889
    Keywords: oxidation ; Ni3Al base alloy ; chromium ; cobalt ; titanium
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The oxidation behavior of Ni3Al+2.90 wt.% Cr, Ni3Al+3.35 wt% Co, and Ni3Al+2.99 wt.% Ti alloys was studied in 1 atm of air at 1000, 1100, and 1200°C. Isothermal tests revealed parabolic kinetics for all three alloys at all temperatures. Cyclic oxidation for 28 two-hour cycles produced little spallation at 1000°C, but caused partial spallation at 1100°C. Especially, at 1200°C severe spallation in all three alloys was observed. Although additions of Cr, Co, or Ti to Ni3Al alloys slightly increased the isothermal-oxidation resistance, the additions tended to decrease the cyclic-oxidation resistance. The major difference in the oxidation of the three alloys compared with the oxidation of pure Ni3Al alloys was the existence of small α-Al2O3 particles in the middle of the α-Al2O3 scale and the formation of irregularly shaped Kirkendall voids at the alloy-scale interface.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 30
    Electronic Resource
    Electronic Resource
    Springer
    Molecular and cellular biochemistry 194 (1999), S. 257-263 
    ISSN: 1573-4919
    Keywords: glycation ; oxidation ; collagen ; diabetes ; free radicals
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology , Chemistry and Pharmacology , Medicine
    Notes: Abstract The present investigation was carried out to understand the effect of metal catalyzed oxidation on glycation and crosslinking of collagen. Tail tendons obtained from rats weighing 200-225 g were incubated with glucose (250 mM) and increasing concentrations of copper ions (5, 25, 50 and 100 μM) under physiological conditions of temperature and pH. Early glycation, crosslinking and late glycation (fluorescence) of collagen samples were analyzed periodically. Early glycation was estimated by phenol sulfuric acid method, and the crosslinking was assessed by pepsin and cyanogen bromide digestion. A concentrationdependent effect of metal ions on the rate of glycation and crosslinking of collagen was observed. Tendon collagen incubated with glucose and 100 μM copper ions showed 80% reduction in pepsin digestion within seven days, indicating extensive crosslinking, whereas collagen incubated with glucose alone for the same period showed only 7% reduction. The presence of metal ions in the incubation medium accelerated the development of Maillard reaction fluorescence on collagen, and the increase was dependent on the concentration of metal ions used. The metal chelator Diethylene triamine penta-acetate significantly prevented the increase in collagen crosslinking by glucose and copper ions. Free radical scavengers benzoate and mannitol effectively prevented the increased crosslinking and browning of collagen by glucose. The results indicate that the metal catalyzed oxidation reactions play a major role in the crosslinking of collagen by glucose. It is also suggested that the prevention of increased oxidative stress in diabetes may prevent the accelerated advanced glycation and crosslinking of collagen.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 31
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 45 (1996), S. 153-181 
    ISSN: 1573-4889
    Keywords: oxidation ; 18O diffusion ; nickel ; stress effects on diffusion
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract This study deals with the influence of various mechanical loadings (fatigue, creep, creep-fatigue) on oxygen diffusion in a particular system, oxidizing nickel. A distinction between the behavior of the oxide layer and underlying nickel was noted during the first step of oxidation at 550°C, in PO 2=1 atm. Mechanical loading causes a decrease of the oxygen mobility through the oxide scale (factor of 103). The oxide thicknesses on nickel undergoing mechanical loadings are different than for an unloaded sample, due to distinct contributions of the oxygen and nickel fluxes in the growing oxide. In the substrate, the ingress of oxygen becomes easier with a constant tensile load (creep). The intergranular-oxygen diffusion coefficient, Di, is increased by a factor of 102 with respect to other samples. In creep, oxygen diffusion takes place along grain boundaries of a structure with smaller grains than in unstrained Ni. A short fatigue period during creep-fatigue decreases the sensitivity of nickel to intergranular-oxygen diffusion.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 32
    Electronic Resource
    Electronic Resource
    Springer
    Molecular and cellular biochemistry 200 (1999), S. 103-109 
    ISSN: 1573-4919
    Keywords: sugar cataract ; dulcitol ; glycation ; oxidation ; pyruvate ; ethyl pyruvate ; attenuation effects
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology , Chemistry and Pharmacology , Medicine
    Notes: Abstract Studies describe an attenuation of sugar cataract formation by topical administration of ethyl pyruvate. Cataract formation was induced by feeding young rats a 30% galactose diet. Mature cataracts appeared in about thirty days. Instillation of the eye drops containing 5% ethyl pyruvate decelerated the process significantly. Biochemically, the effect was reflected by lowering in the contents of dulcitol and glycated proteins. The ATP levels were also higher in comparison to the placebo treated group. The effects are hence attributable to the effect of pyruvate in inhibiting dulcitol synthesis and protein glycation, in addition to its antioxidant properties and metabolic support. The use of esterified pyruvate instead of the unesterified pyruvate was preferred because of its greater penetration through the cornea and consequently a higher concentration attained in the aqueous humor.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 33
    ISSN: 1572-9028
    Keywords: ellipsometry ; carbon monoxide ; methane ; palladium ; palladium oxide ; oxidation ; oscillations ; catalyst
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Spectroscopic ellipsometry is used to monitor the surface of a thick Pd‐film catalyst during the oxidation of either carbon monoxide or methane. Dense PdO layers form under sufficiently lean conditions (excess oxygen) for both reactions. A stable metal surface exists in the case of CO, but a very porous PdO layer develops in the case of methane, under rich conditions. There is a large hysteresis in the conditions for PdO formation in the case of CO oxidation. Spontaneous oscillations in catalytic activity and Pd‐surface composition occur for both reactions, the higher activities corresponding to O‐atom‐rich or PdO‐rich surfaces for CO or methane oxidation, respectively.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 34
    Electronic Resource
    Electronic Resource
    Springer
    Topics in catalysis 8 (1999), S. 45-55 
    ISSN: 1572-9028
    Keywords: Raman spectroscopy ; surface‐enhanced Raman spectroscopy ; oxidation ; synergy effects ; oxygen exchange ; oxidative coupling of methane ; nitric oxide decomposition ; methanol oxidation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Advantages and limitations of laser Raman spectroscopy (LRS) as an in situ vibrational spectroscopy for the study of catalytic materials and surfaces under working conditions are discussed. Measurements can be carried out at temperatures as high as 1200 K in controlled atmospheres. Modern instrumentation permits time resolutions in the sub‐second regime for materials with high Raman cross sections. Transient studies are thus possible. Several examples are presented of in situ LRS studies including the phase analysis of bismuth molybdate and VPO oxidation catalysts, synergy effects and oxygen exchange in Sb2O3/MoO3 oxide mixtures, intermediates in oxidative coupling of methane, NO decomposition on Ba/MgO catalysts, and transient SERS studies of partial oxidation of methanol on Ag single crystal surfaces and of the reduction of oxide overlayers on electrodeposited Rh layers.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 35
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 45 (1996), S. 109-131 
    ISSN: 1573-4889
    Keywords: Fe−Al−C ; Fe−Al−Si−C ; inoculation ; scale ; characterization ; oxidation ; high temperature
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract Isothermal-oxidation characteristics of cast irons containing aluminum (5–15% Al) from 700 to 1000°C in air have been studied. In addition to massgain measurements, the morphology and composition of the oxide scales have been examined by SEM-EDX system and XRD analysis. A normal Fe−5Al−C alloy does not develop protective, adherent scales. Even the addition of misch metal and calcium silicide to such an alloy does not improve its oxidation resistance. But aluminum cast iron develops considerable oxidation resistance only when a sufficient quantity of silicon is also present in the alloy. Treatment of the alloy with misch, metal and calcium silicide together assists in protective scale formation. Among the alloys investigated Fe−15Al−Si−C treated with misch metal and calcium silicide shows minimum oxidation at 1000°C.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 36
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 45 (1996), S. 469-486 
    ISSN: 1573-4889
    Keywords: iron ; sulfur dioxide ; oxidation ; tracer
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The reaction of iron with sulfur dioxide at 0.1 MPa and 1073 K was studied. The composition and morphology of the scales, transport phenomena occurring in the growing scales, and kinetics of the process were investigated. Scanning electron microscopy and various techniques of X-ray analysis were used. The transport phenomena were studied by marker and by radiotracer techniques. The scales were composed of sulfide and oxides and grew by the outward diffusion of metal. It was concluded that the process initially took place through the reaction of iron with sulfur dioxide molecules. During the next stage of the process the reaction with sulfur dioxide molecules as well as with oxygen molecules is possible.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 37
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 45 (1996), S. 507-527 
    ISSN: 1573-4889
    Keywords: oxidation ; sulfidation ; oxides ; sulfides ; Ti ; Ti-6Al-4V alloy
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract Pure titanium and Ti-6Al-4V were exposed at 750°C in an H2/H2O/H2S PO 2≈10−18 Pa and PS 2≈10−1 Pa), H2/H2O (PO 2≈10−18 Pa) and air environments for up to 240 hr. The corrosion kinetics, obtained by the discontinuous gravimetric method, showed that the sulfidation/oxidation kinetics were linear for Ti and linear-parabolic for Ti-6Al-4V in the H2/H2O/H2S environment. Both materials obeyed parabolic rate laws in the H2/H2O atmosphere after a transient period, and linear-parabolic rate laws in air. After exposure to the H2/H2O/H2S atmosphere, the titanium specimen displayed a double scale of TiO2 with an intervening TiS2 film between the double-layered scale of TiO2 and the substrate. Ti-6Al-4V also contained a double layer of TiO2 together with a stratum consisting of Al2S3, TiS2 and vanadium sulfide at the junction of the inner TiO2 layer and substrate. Some Al2O3 precipitated in the external portion of the outer TiO2 layer. Following oxidation in the low-PO 2 atmosphere a double-layered oxide of TiO2 scale formed on both Ti and Ti-6Al-4V. The scale on Ti-6Al-4V also contained an α-Al2O3 film situated between the outer and inner (TiO2) layers. For both materials, multilayered-scale formation characterized air oxidation. In detail a multilayered oxide scale of TiO2 formed on the air-oxidized Ti, while a multilayered oxide scale with alternating layers of Al2O3/TiO2 developed on Ti-6Al-4V oxidized in air.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 38
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 45 (1996), S. 487-505 
    ISSN: 1573-4889
    Keywords: sulfidation ; oxidation ; gasification ; austenitic steel alloys
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The major use of high-temperature steel alloys in gasifiers is in heat exchangers for cooling hot syngas, consisting mainly of CO and H2 with lesser amounts of H2O and CO2 and minor quantities of H2S and HCl. Metal temperatures range from 250 to 600°C, gas temperatures from 250 to 1200°C. Because of rapid cooling the composition of the gas does not change with temperature. Therefore the gas is not in equilibrium at the metal surface. Calculations show that such gases have lower oxygen and sulfur pressures than equilibrated gases at the same temperature. This makes the results of previous laboratory studies less appropriate for predicting mixed oxidant corrosion in gasifiers. For this reason the present study was carried out using nonequilibrium gas mixtures, similar to gases, produced in entrained-slagging gasifiers. Most corrosion experiments were carried out at 540°C, as this is a common temperature for superheaters and hot-gas cleanup systems. Iron-base model alloys containing 35% Ni, 20% Cr, and various minor alloying additions were studied. Three corrosion regimes were identified over the range of conditions studied, depending on the sulfur-to-oxygen pressure ratio of the gas and the alloy composition. At high PS 2/PO 2 ratios a somewhat protective FeCr2S4 scale formed on all alloys. Below this layer internal oxidation and sulfidation occurred at a slow rate. At lower PS 2/PO 2 ratios nonprotective Fe(Ni, Cr)S external scales formed. These allow rapid internal oxidation of the chromium in the alloy, resulting in high corrosion rates. Under the same conditions very low corrosion rates are obtained when silicon is added to the alloy, because the presence of SiO2 precipitates makes the internal-oxidation layer protective. Thus, the same corrosion model is operative in all three corrosion regimes: external sulfidation of iron and nickel, together with internal oxidation of chromium and other strong-oxide formers.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 39
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 46 (1996), S. 255-285 
    ISSN: 1573-4889
    Keywords: electron diffraction ; intermetallic ; oxidation ; TEM ; titanium aluminide
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The early stages of TiAl oxidation at 900°C and 1000°C in air have been investigated by transmission electron microscopy (TEM). The investigations revealed that at the beginning of oxidation, i.e., after 4 min, TiO2 and Al2O3 grow in a preferential orientation on the γ-TiAl substrate. After 4 h of oxidation an oxide scale structure can already be found similar to that known from long-term oxidation. In addition, besides α-Al2O3, the formation of a second aluminum oxide phase and of titanium nitrides is observed. The processes at the metal-oxide interface of oxidation in the early stages, consisting of a repeated cycle of Al2O3 formation, Al2O3 dissolution, outward migration of Al through the scale, and reprecipitation of Al2O3 in the outer scale, are described by a model. The four stages observed in the kinetics of TiAl oxidation are explained on the basis of the results obtained and the structure of the oxide scale.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 40
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 46 (1996), S. 287-297 
    ISSN: 1573-4889
    Keywords: pure niobium ; oxidation ; sulfidation ; oxidation-sulfidation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The corrosion of pure niobium has been studied at 600–800°C in various environments as part of a study of the corrosion resistance of its alloys with iron, cobalt, and nickel to atmospheres of low-oxygen and/or high-sulfur activities. The results have shown that not only the sulfidation but also the corrosion in mixed atmospheres and particularly the oxidation under low oxygen pressures of pure niobium are quite slow, with kinetics rather similar in the three types of gas mixtures used. The good corrosion resistance of niobium to attack by oxygen under low pressures is quite interesting because this element is corroded very rapidly by oxygen under high oxygen pressures, due to the formation of the nonprotective highest oxide Nb2O5 as a main corrosion product.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 41
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 46 (1996), S. 335-364 
    ISSN: 1573-4889
    Keywords: Fe−Cr ; oxidation ; exhaust gas ; oxide adherence ; titanium ; rare earths
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract Oxidation tests of rare-earth-modified and Ti-modified Fe−20Cr alloy foils, which are under consideration for catalytic converter supports, were performed in a synthetic exhaust-gas atmosphere (N2+H2O+CO2) between 900°C and 650°C. Between 900°C and 750°C, the rare earths had no effect on oxide growth rates while Ti increased growth rates. Oxide growth rates for the rareearth alloys at 800°C and 750°C are much lower than those found in the literature for oxidation of Fe−Cr alloys or pure Cr in O2-rich atmospheres. The slow growth rates for the rare-earth alloys agree with literature data for oxidation of stainless steels containing 〉20% Cr in wet atmospheres and are caused by growth of an oxide scale only one grain thick. At temperatures ≤700°C, Fe−20Cr alloys grow massive Fe oxides; however, this can be suppressed by adding rare earths or Ti. To ensure good oxide adherence, free sulfur must be eliminated in the alloy by tying it up with a reactive-element addition. Both Ti and the rare earths can be used to tie up S, but the rare earths are more effective. For converter applications, the optimum alloy composition may contain rare earths for good oxide adherence and a small amount of Ti to suppress growth of Fe-rich oxides.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 42
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 46 (1996), S. 365-381 
    ISSN: 1573-4889
    Keywords: oxidation ; steel ; Raman ; scale ; transient oxides
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract Using Raman scattering we have investigated the oxidation, in air, of the Fe-Cr-Ni stainless steels Fe-25Cr-20Ni, Fe-25Cr-20Ni-3Zr, and Fe-24Cr-3Zr (wt.%) as a function of temperature in the range 300 to 1000°C. The Raman technique is very sensitive to, and provides a clear identification of, the oxides Fe2O3 and Cr2O3. However, the technique is insensitive to NiO, FeO, and does not give a clear identification of spinels. The Fe−Cr−Ni alloys form chromia scales at temperatures greater than ∼800°C. At lower oxidation temperatures, transient phases are observed. With a 1-h heat treatment at 300°C, we observe the formation of an unidentified scale; we speculate that it is either amorphous or consists of disordered spinel(s). Near 400°C we begin to observe hematite (Fe2O3). The intensity of the Fe2O3 signal increases with temperature to ∼600°C and then decreases, being largely replaced by the signal from Cr2O3. The thickness of the Cr2O3 scale increases with temperature up to ∼1000°C above which spallation becomes apparent. Spinel phases also apparently persist in the scale to 1000°C.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 43
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 46 (1996), S. 383-398 
    ISSN: 1573-4889
    Keywords: high temperatures ; binary alloys ; two-phase alloys ; oxidation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The steady-state kinetics in the high-temperature oxidation of binary A-B alloys containing a mixture of the conjugated solid solutions of B in A (alpha phase) and A in B (beta phase) with exclusive formation of the most-stable oxide BOv have been examined, assuming that the external scale grows on top of a subsurface layer of alpha phase. The results obtained are compared with the corresponding behavior of alloys which are single phase in the whole range of composition. Under identical values of all the parameters involved the concentration of B at the alloy-scale interface is smaller for two-phase than for single-phase alloys under the same concentration of B in the alloy as a result of the restricted flux of B through the alpha-phase layer. As a consequence of this, the two-phase alloys corrode more slowly than single-phase alloys and this difference increases as the solubility of B in the alpha phase decreases. Finally, the simultaneous formation of BOv both externally and as internal oxide is more likely for two-phase than for single-phase materials.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 44
    ISSN: 1573-4889
    Keywords: niobium alloys ; oxidation ; high temperatures
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The corrosion of M−Nb alloys based on iron, cobalt, and nickel and containing 15 and 30 wt% Nb has been studied at 600–800°C under low oxygen pressures (10−24 atm at 600°C and 10−20 atm at 700–800°C). Except for the Co−Nb and Ni−Nb alloys corroded at 800°C, which formed external scales of niobium oxides, corrosion under low O2 pressures produced an internal oxidation of niobium. This attack was much faster than expected on the basis of the classical theory. Furthermore, the distribution of the internal oxide in the alloys containing two metal phases was very close to that of the Nb-rich phase in the original alloys. These kinetic, microstructural, and thermodynamic aspects are examined by taking into account the effects of the limited solubility of niobium in the various base metals and of the two-phase nature of the alloys.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 45
    ISSN: 1573-4889
    Keywords: oxidation ; scaling ; surface temperature ; heat of reaction
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract This paper describes the oxidation behavior of low-carbon steel samples in binary gas mixtures of oxygen and nitrogen, at oxygen concentrations ranging between 1% and 15% and temperatures ranging between 1000 and 1250°C. Sample weight gains versus time were analyzed, along with measurements and calculations of sample heating rates due to exothermic heat of reaction at the sample surface. It was found that initial rates of oxidation depended on oxygen content in the gasmixture and that these reaction rates were linear up to oxide thicknesses of 0.4 to 0.5 mm. Calculations of linear oxidation rate constants based on equations for mass transport of oxygen in the gas mixture to the sample surface showed good agreement with those measured experimentally, indicating that the initial period of oxidation is controlled by the mass transport of oxygen to the reaction interface. The linear rate constants showed little dependency on temperature, an activation energy of approximately 17kJ/mole being obtained. Measurements of sample surface temperatures have shown that within this linear-oxidation regime, interfacial temperatures of the samples increase with increasing oxygen contents in the gas mixture, owing to exothermic heats of oxidation. Subsequent oxidation kinetics were found to be parabolic. Measured parabolic rates constants were in good agreement with previous investigations, with activation energy values of approximately 127kJ/mole.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 46
    ISSN: 1573-4889
    Keywords: ODS Alloy ; oxidation ; SIMS ; microstructure
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract Alumina-forming ODS superalloys are excellent oxidation-resistant materials. Their resistance relies upon the establishment of a stable, slow-growing, and adherent α-alumina. In the present investigation, these alloys exhibited unstable and relatively less adherent θ-alumina phase, which increased the oxidation rate in the transient stage and converted into α-alumina in the later part of the exposure. The oxide-growth process was found to depend upon various parameters such as temperature, time, and presence of an active elecment in the superalloy. Characterization carried out by XRD, SEM/EDAX, and AES on oxidized ODS and non-ODS alloys demonstrated a significant influence of the active element, Y, on the transformation of θ- to α-alumina. SIMS analysis of two-stage oxidation at 900°C for two different durations evidently showed that the change in the transport process is due to θ-to-α-alumina transformation. On the basis of these results, a new and consistent mechanism is proposed to explain the influence of θ-alumina and its transformation on growth kinetics and the effect of yttrium on the transformation leading to good scale adherence and oxidation resistance.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 47
    Electronic Resource
    Electronic Resource
    Springer
    Journal of sol gel science and technology 14 (1999), S. 75-86 
    ISSN: 1573-4846
    Keywords: silicon oxycarbide ; BlackglasTM ; ceramic matrix composites ; 29Si NMR ; oxidation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract BlackglasTM polysiloxane systems produce silicon oxycarbide glasses by pyrolysis in inert atmosphere. The silicon oxycarbides evidence oxidative degradation that limits their lifetime as composite matrices. The present study characterizes bonding rearrangements in the oxycarbide network accompanying increases in pyrolysis temperature. It also addresses the changes in susceptibility to oxidation due to variations in the distribution of Si bonded species obtained under different processing conditions. The study is carried out using 29Si nuclear magnetic resonance (NMR) spectroscopy and a design of experiments approach to model the oxidation behavior. The NMR results are compared with those obtained by thermogravimetric analysis (TGA). Samples pyrolyzed under inert conditions are compared to those pyrolyzed in reactive ammonia environments.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 48
    Electronic Resource
    Electronic Resource
    Springer
    Journal of sol gel science and technology 14 (1999), S. 49-68 
    ISSN: 1573-4846
    Keywords: silicon oxycarbide ; oxidation ; silsesquioxane ; preceramic
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract We have undertaken a systematic study of the oxidation chemistry for a range of SiOC ceramics derived from silsesquioxane polymeric precursors. This study examines the oxidation for 500 hours at 600, 800, 1000 and 1200°C for four SiOC powders. The material changes upon oxidation were characterized qualitatively by color change and optical microscopy and quantitatively by weight and composition change. In this study we employ a very easy method that uses the weight change upon oxidation and a carbon analysis after oxidation to arrive at the composition of the oxidized SiOC. Combined these qualitative and quantitative techniques have shown that on oxidation at 800 and 600°C the SiOC composition is more rapidly changed to that of silica than oxidation over the same time frame at 1000 or 1200°C. The data indicates that this difference is due to the relative rates of oxidation of the excess carbon versus the Si—C bonds in the SiOC. At lower temperatures initially the carbon oxidation predominates which leads to higher porosity throughout the material and an increase in the surface area with eventually ‘complete’ oxidation to silica. At higher temperatures the Si—C bond oxidation rate is comparable to the rate of oxidation of carbon. This allows a silica-like surface to build up on the SiOC, which slows all subsequent reactions due to the necessity to diffuse O2 in and COx out of the bulk. Under these oxidation conditions materials that originally contain high amounts of excess carbon are more quickly oxidized to silica than those that contain minimal amounts of excess carbon, as confirmed by elemental analysis and optical microscopy. Regardless of the time or temperature of the oxidation conditions no materials were found to be completely stable to oxidation. SiOC materials with low levels of excess carbon showed the best resistance to change upon oxidation.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 49
    Electronic Resource
    Electronic Resource
    Springer
    Physics and chemistry of minerals 26 (1999), S. 506-512 
    ISSN: 1432-2021
    Keywords: Key words Anapaite ; Mössbauer spectroscopy ; oxidation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology , Geosciences , Physics
    Notes: Abstract Mössbauer spectra (MS) of anapaite (Ca2 Fe2+(PO4)2 · 4H2O) and of a sample after being immersed in a 4% H2O2 solution at room temperature (RT) over 12 days (hereafter an4ox) were collected at temperatures in the range 4.2 to 420 K and 11 to 300 K respectively. All MS consist of symmetrical doublets, hence magnetic ordering was not observed. The temperature dependencies of the Fe2+ centre shifts of anapaite and an4ox were analysed with the Debye model for the lattice vibrations. The characteristic Mössbauer temperatures were found as 370 K ± 25 K and 340 K ± 25 K, and the intrinsic isomer shifts as 1.427 ± 0.005 mm/s and 1.418 ± 0.005 mm/s respectively. From the external-field (60 kOe) MS recorded at 4.2 and 189 K for the non-treated sample, the principal component V zz of the electric field gradient (EFG) is determined to be positive and the asymmetry parameter η ≈ 0.2 and 0.4 respectively. The temperature variations of the quadrupole splittings, ΔE Q(T), cannot be interpreted on the basis of the thermal population of the 5 D electronic levels resulting from the tetragonal compression of the O6 co-ordination. The low-temperature linear behaviour of ΔE Q(T) is attributed to a strong orbit-lattice coupling. A field of 60 kOe applied to anapaite at 4.2 K produces magnetic hyperfine splitting with effective hyperfine fields of −136, −254 and −171 kOe along the principal axes Ox, Oy and Oz of the EFG tensor respectively. Additional oxidation treatments in solutions with various H2O2 concentrations up to 20% and subsequent Mössbauer experiments at room temperature, have revealed that the anapaite structure is not sensitive to oxidation since eventually only a small amount of Fe2+ (∼6.5%) is converted into Fe3+.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 50
    Electronic Resource
    Electronic Resource
    Springer
    Russian chemical bulletin 45 (1996), S. 340-345 
    ISSN: 1573-9171
    Keywords: oxidation ; acid catalysis ; free radicals ; acetonitrile ; p-toluenesulfonic acid ; tert-butyl hydroperoxide ; cyclohexanone
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The kinetics of formation of free radicals in the cyclohexanone (CH)-tert-butylhydroperoxide (TBHP)-para-toluenesulfonic acid (PTSA) system in acetonitrile was studied. The stoichiometry of the reaction corresponds to the consumption of two TBHP molecules per ketone molecule, whereas the yield of free radicals is -20 % based on the TBHP reacted.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 51
    ISSN: 1573-9171
    Keywords: 1,2,4,5-tetrafluoro-3,6-bis(vinylthio)benzerne ; 1,2,4,5-tetrafluoro-3,6bis(vinylsulfonyl)benzene ; 5,6-difluorobenzo-[a,d]-bis(3,3′-dihydro-1,1′-sulfonylallyl-4,4′-perhydroazine) ; oxidation ; allylamine ; X-ray structural study
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Oxidation of 1,2,4,5-tetrafluoro-3,6-bus (vinylthio)benzene (1) affords 1,2,4,5-tetra fluoro3,6-bis(vinylsulfonyl)benzene (2) in 65 % yield. The reaction of compound 2 with allylamine gives a new heterocyclic compound, 5,6-difluorobenzo-[a,d]-bis(3,3′-dihydro-l,l′-sulfonylallyl-4,4′-perhydroazine) (3). This compound is the product of nucleophilic addition at the vinylsulfonyl group and intramolecular replacement of fluorine atoms of the benzene ring. The structure of compound 3 has been established by X-ray structural study.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 52
    ISSN: 1573-9171
    Keywords: active carbons ; oxidation ; surface chemistry ; n-hexane ; water ; methanol ; adsorption
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The influence of oxidation by nitric acid on the character of oxygen-containing functional surface groups and porous structure of active carbons is considered. Adsorption properties of the initial and oxidized carbons are studied using adsorption isotherms of vapor of n-hexane and polar substances (water and methanol).
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 53
    Electronic Resource
    Electronic Resource
    Springer
    Russian chemical bulletin 45 (1996), S. 1883-1888 
    ISSN: 1573-9171
    Keywords: decane ; nitric acid ; nitrogen dioxide ; oxidation ; kinetics ; mechanism
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The kinetics of the reaction of decane with nitric acid (25.07–75.53 %) at 57.8 to 119 °C in an acid-decane-gas triphasic system was studied. The main contribution to the rate of heat release is made by the oxidation of decane with nitrogen dioxide in the organic phase proceedingvia the mechanism of a degenerate branched-chain reaction. Nitration plays the role of a chain termination reaction. The acid phase is the source of NO2, whose content increases with oxidation. The equilibrium of the nitrogen dioxide distribution in the triphasic system was analyzed. The kinetic law of the reaction, the dependences of the reaction constants of the initial and catalytic stages on temperature and the acid phase composition were determined. The results allow one to calculate the rate of heat release in the decane-HNO3 system under any conditions of the process.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 54
    Electronic Resource
    Electronic Resource
    Springer
    Russian chemical bulletin 45 (1996), S. 1889-1895 
    ISSN: 1573-9171
    Keywords: phenazine di-N-oxide ; radical cation ; hydrocarbons ; oxidation ; mechanism ; O2 effect
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The absorption spectra of phenazine di-N-oxide radical cation (OPO+·) in dichloromethane were recorded by the spectroelectrochemical method in the range from 300 to 700 nm. The reactions of the electrochemically generated OPO+· withpara-substituted toluenes, ethylbenzene, and cumene were studied. Using differential cyclic voltammetry, relative rate constants of reactions of OPO+· with substrates were determined; their correlations with σ+ para constants of substituents gives p = -2.7, which attests to the nonradical character of the reaction of OPO+· with RH. This conclusion is confirmed by the study of the effect of O2 on oxidation of ethylbenzene and cumene.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 55
    Electronic Resource
    Electronic Resource
    Springer
    Russian chemical bulletin 45 (1996), S. 2668-2669 
    ISSN: 1573-9171
    Keywords: diphenyl sulfide ; sulfuryl chloride ; oxidation ; chlorination
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The reaction of diphenyl sulfide with sulfuryl chloride was studied. Depending on the reaction conditions, it occurs either as chlorination of the aromatic ring or as oxidation to give sulfoxide.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 56
    ISSN: 1573-9171
    Keywords: alkenes ; catalysis ; oxidation ; iodohydrins
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract RuCl3-catalyzed periodate oxidation of alkenes affords isomeric iodohydrins.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 57
    ISSN: 1572-8978
    Keywords: Plasma polymers ; oxidation ; XPS ; photoelectron binding energy
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Technology
    Notes: Abstract The incorporation of oxygen into nitrogen-containing plasma deposited polymers was studied by X-ray Photoelectron Spectroscopy (XPS). As the oxygen content of the plasma polymer increased, the binding energy of the N 1s photoelectrons increased. Conversely, the binding energy of the O 1s photoelectrons was inversely proportional to the nitrogen content of the plasma polymer. The data from a large number of samples all obeyed the same “universal” correlations of photoelectron binding energy versus chemical composition. The data were described by the same curve regardless of whether the oxygen was incorporated rapidly into the thin film during plasma deposition or whether the oxygen was added slowly during spontaneous oxidation of the film in air. This implies that the same thermodynamic principles of radical reactions governed the addition of oxygen to the plasma polymer. The shift in the O 1s and N 1s photoelectron binding energies as a function of chemical composition was used to monitor the proximity of nitrogen and oxygen. By contrasting the experimental data with a simple binomial model which described the random addition of oxygen to a lattice containing carbon and nitrogen, we were able to show that oxygen was preferentially added near nitrogen-containing groups in plasma polymers.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 58
    ISSN: 1573-904X
    Keywords: sulfur ; protein ; oxidation ; chemometrics ; phosphate
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Purpose. The oxidation of methionine in human Insulin-like Growth Factor I (hIGF-I) in aqueous solution was studied with respect to oxygen, visible light and sodium phosphate. Methods. Aqueous solutions of hIGF-I were prepared with different amounts of phosphate and dissolved oxygen. The solutions were stored either in darkness or exposed to artificial visible light. The oxidized hIGF-I was quantified by RP-HPLC. A two level full factorial experimental design, with two levels of each of the three factors studied, was used. Results. Oxidation was found to be positively correlated with light, oxygen content and, interestingly, phosphate. The increasing effect of phosphate on the oxidation appears not to originate from metal contaminants. The influence of both oxygen and phosphate increased with time. The pH dependence of oxidation indicated the formation of a phosphorylated sulfonium ion as an oxidation intermediate. A significant interaction effect between phosphate and visible light suggested participation of radicals. Conclusions. Factorial experiments provide a valuable tool when studying complex mechanisms with interacting factors. The oxidation of methionine in hIGF-I is significantly affected by light but also by the presence of phosphate buffer.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 59
    ISSN: 1573-904X
    Keywords: iron ; chelator ; oxidation ; methionine/histidine
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Purpose. Site-specific protein oxidation induced by prooxidant/metal/ oxygen has been recognized as one of the major degradation pathways of protein pharmaceuticals. Polyaminocarboxylate (PAC) metal chelators are commonly employed to prevent metal-catalyzed oxidation, for they sequester metals. However, studies have indicated that iron chelates may still be catalytically active due to their specific coordination geometry. The purpose of this study was to investigate how PAC chelators affect prooxidant/metal/oxygen-catalyzed oxidation of peptides containing histidine (His) and methionine (Met). Methods. PACs were applied to a model oxidizing system, dithiothreitol/iron/oxygen, which was shown to promote the oxidation of Met to Met sulfoxide in the two model peptides, GGGMGGG and GHGMGGG. Results. PAC chelators did not suppress the peptide oxidation but significantly changed the product pattern. In particular, the yield of Met sulfoxide dropped significantly, while a number of other products emerged, including oxidation products from the N-terminus and His (if present). Overall, the oxidation became rather non-selective in the presence of PACs. The oxidation kinetics were significantly accelerated by nitrilotriacetate (NTA), ethylenediaminediacetate (HDDA), and ethylenediaminetetraacetate (EDTA), but they were slowed down by ethyl-enebis(oxyethylenenitrilo)tetraacetate (EGTA) and diethylenetriaminepentaacetate (DTPA). Meanwhile the PAC chelators were also observed to undergo degradation. Scavengers of hydrogen peroxide or hydroxyl radicals exerted only partial inhibition on the peptide oxidation. Conclusions. The results of this study are rationalized by the abilities of PAC chelators (i) to extract iron from potential binding sites of the peptides to impair site-specific oxidation, and (ii) to promote the formation of ROS different from the species formed at the peptide metal-binding sites.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 60
    ISSN: 1573-904X
    Keywords: hIGF-I ; oxidation ; methionine ; HPLC ; kinetics
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Purpose. The aim of this work was to study the kinetics of oxidation of methionine in human Insulin-like Growth Factor I (hIGF-I)1 in aqueous solution and in the solid state by the aid of quantification of oxygen. Methods. The oxidized form of hIGF-I was characterized by tryptic peptide analysis, RP-HPLC and FAB-MS and quantified by RP-HPLC. The oxygen content was quantified polarographically by a Clark-type electrode. Results. Second-order kinetics with respect to amount of protein and dissolved oxygen was found to be appropriate for the oxidation of methionine in hIGF-I. The rate constants ranged from 1 to 280 M−1 month−l and had an activation energy of 95 (+/−4) kJ/mole. Light exposure, storage temperature and oxygen content were found to have a considerable impact on the oxidation rates. No significant difference in reaction rates was found for the oxidation of hIGF-I in aqueous solution or in the solid state. A method for decreasing the oxygen content in aqueous solution without purging is described. Conclusions. Polarographic quantification of dissolved oxygen makes it possible to establish the kinetics for oxidation of proteins. The oxidation of methionine in hIGF-I appears to follow second-order kinetics.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 61
    Electronic Resource
    Electronic Resource
    Springer
    Pharmaceutical research 13 (1996), S. 457-461 
    ISSN: 1573-904X
    Keywords: nicanartine ; lipoprotein ; oxidation ; plasma binding
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Purpose. The aim of this study is to investigate the plasma protein binding of nicanartine and to measure its antioxidant effect on lipoproteins. Methods. The blood binding was studied with an erythrocyte partitioning method and the lipoprotein oxidation with the conjugated dienes method. Results. Nicanartine was 24.7% LDL (low density lipoprotein)-bound and 29.2% AAG (alphal-acid glycoprotein)-bound. Nicanartine delayed but did not stop the oxidation of the three density classes of lipoprotein HDL (high density lipoprotein), LDL, VLDL (very low density lipoprotein). The addition of AAG to LDL in the conjugated dienes method decreased the nicanartine fraction bound to LDL and decreased its antioxidant effect. The decrease of nicanartine LDL-bound fraction and the decrease in antioxidant effect were not parallel. Conclusions. This suggested that (a) AAG-bound nicanartine dissociated to equilibrate the decrease in LDL-bound nicanartine consummed by oxidation, or (b) the oxidation conditions could involve chemical modifications of nicanartine and therefore modify its affinity for AAG.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 62
    ISSN: 1573-904X
    Keywords: peptide stability ; peptide formulation ; oxidation ; fibrinogen receptor antagonist ; mannitol
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Purpose. To elucidate the structure of a degradation product arising from a lyophilized formulation of a cyclic heptapeptide, and to provide a mechanism to account for its formation. Methods. Preparative HPLC was used to isolate the degradate in quantities sufficient for structural studies. A structure assignment was made on the basis of the compounds spectroscopic properties (UV, MS, NMR) and the results of amino acid analysis. Results. The degradate was identified as a benzaldehyde derivative arising from the oxidative deamination of an aminomethyl phenylalanine moiety. The extent of formation of this product is influenced by the amount of mannitol used as an excipient in the formulation. A mechanism is proposed whereby reducing sugar impurities in mannitol act as an oxidizing agent via the intermediacy of Schiff base adducts which subsequently undergo tautomerization and hydrolysis. Conclusions. Reducing sugar impurities in mannitol are responsible for the oxidative degradation of the peptide via a mechanism that involves Schiff base intermediates. This mechanism may be a potential route of degradation of other arylmethyl amines in mannitol-based formulations.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 63
    Electronic Resource
    Electronic Resource
    Springer
    Pharmaceutical research 13 (1996), S. 250-255 
    ISSN: 1573-904X
    Keywords: antiflammin 2 ; oxidation ; stability ; degradation ; HPLC
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Purpose. To study the oxidation of the methionine residue of antiflammin 2 (HDMNKVLDL, AF2) as a function of pH, buffer concentration, ionic strength, and temperature using different concentrations of hydrogen peroxide and to determine the accessibility of methionine residue to oxidation. Methods. Reversed-phase high-performance liquid chromatography (RPHPLC) was used as the main analytical method in determining the oxidation rates of AF2. Calibration curves for AF2 and the oxidation product, methionine sulfoxide of AF2 (Met(O)-3-AF2), were constructed for each measurement using standard materials. Fast Atom Bombardment Mass Spectroscopy (FABMS) was used to characterize the product. Results. Met(O)-3-AF2 was the only oxidation product detected at pH 3.0 to 8.0. The oxidation rates were independent of buffer concentrations, ionic strength, and pH from 3.0 to 7.0. However, there was an acceleration of the rates at basic pHs, and small amounts of degradation products other than Met(O)-3-AF2 were observed in this alkaline region. Conclusions. Oxidation of methionine in AF2 does not cause the biological inactivation reported by other laboratories since this drug is relatively stable under neutral conditions in the absence of oxiding agent.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 64
    Electronic Resource
    Electronic Resource
    Springer
    Journal of chemical ecology 25 (1999), S. 611-628 
    ISSN: 1573-1561
    Keywords: Terrestrial isopods ; Oniscidea ; Porcellio scaber ; phenolics ; hydrolysis ; oxidation ; detoxification ; hindgut cuticle ; gut microbiota ; hepatopancreatic bacteria
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology , Chemistry and Pharmacology
    Notes: Abstract When adults of Porcellio scaber fed on litter prior to an artificial diet containing 5% of commercially available tannic acid, 55% of the ingested galloylglucose esters was excreted unchanged, about 25% was hydrolyzed, and 20% was oxidized during the gut passage. After reducing the counts of microorganisms in the gut of P. scaber, the data obtained indicated an important role of ingested platable microorganisms in hydrolyzing gallotannins. Oxidation of phenolics appeared to be mainly due to the endosymbiotic bacteria of the hepatopancreas. Microbial counts in the hindgut were strongly reduced by ingested galloylglucose esters, while gallic acid in the diet (2%) reduced the number of palatable fungi and bacteria less strikingly, and increased the total number of the gut microbiota. Hepatopancreatic bacteria were only slightly affected by ingested tannic acid, since the hepatopancreas contained only few galloylglucose esters. This may be due to the permeability of the hindgut cuticle: the cuticle of the anterior hindgut was freely permeable to gallic acid, while it was nearly impermeable to larger polyphenols. The cuticle of the posterior hindgut was permeable to only about 4% of the gallic acid present in the hindgut lumen. The results are discussed with respect to potentially harmful effects of ingested hydrolyzable tannins and their digestion in Porcellio scaber.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 65
    ISSN: 1573-0867
    Keywords: elemental sulphur ; oxidation ; organic S ; mineralization ; immobilization ; S fertilizers ; semiarid soils ; subtropical region
    Source: Springer Online Journal Archives 1860-2000
    Topics: Agriculture, Forestry, Horticulture, Fishery, Domestic Science, Nutrition
    Notes: Abstract The increasing sulphur (S) deficiency in soils of several parts of world has led to the use of fertilizer S, an important factor in enhancing the production and quality of crops. Very limited information is available on the use of elemental sulphur (S0) as a fertilizer, its oxidation into SO42- and transformation into organic S in semiarid subtropical soils. We studied the impact of three temperature regimes on the mineralization of soil organic S, and the oxidation and immobilization of S0 in acidic (pH 4.9), neutral (pH 7.1) and alkaline (pH 10.2) subtropical soils of north-western India. Repacked soil cores were incubated under aerobic conditions (60% water-filled pore space) for 0, 14, 28 and 42 d with and without incorporated S0 (500 μg g-1 soil). Temperature had profound effects on all three soils processes, the rates of mineralization of native soil organic S, oxidation of applied S0 and transformation of S0 into soil organic S being greatest at 36 °C, irrespective of soil pH. Mineralization of native soil organic S (without added S0) resulted in the accumulation of 39, 66 and 47 μg SO42-–S g-1 soil in acidic, neutral and alkaline soil in 42 d period at 36 °C. Of the total mineralization, the majority (62 – 74%) occurred during the first 14 d period. Oxidation rate of added S0 during initial 14 d period at 36 °C was highest in alkaline soil (292 μg S cm-2 d-1), followed by neutral soil ((180 μg S cm-2 d-1) and lowest in acidic soil (125 μg S cm-2 d-1). Of the applied 500 μg S0 g-1 soil, 3.2 – 10.0%, 6.8 – 15.4% and 10.0 – 23.0% oxidized to SO42-, and 13.4 – 28.6%, 16.0 – 29.0% and 14.6 – 29.0% were transformed into organic S in 42 d period in acidic, neutral and alkaline soil, respectively. The results of our study suggest that in order to synchronize the availability of S with plant need, elemental S may be applied well before the seeding of crops, especially in acidic soil and in regions where temperature remains low. Substantial mineralization of native soil organic S in the absence of applied S0 and immobilization of applied S0 into organic S suggest that the role of soil biomass as source and sink could be exploited in long term S management.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 66
    ISSN: 1572-9729
    Keywords: Diphenyl ether ; ligninolytic enzymes ; metabolites ; oxidation ; Trametes versicolor ; white-rot fungi
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology , Energy, Environment Protection, Nuclear Power Engineering , Agriculture, Forestry, Horticulture, Fishery, Domestic Science, Nutrition
    Notes: Abstract The white-rot fungi Trametes versicolor SBUG 1050, DSM 11269 and DSM 11309 are able to oxidize diphenyl ether and its halogenated derivatives 4-bromo- and 4-chlorodiphenyl ether. The products formed from diphenyl ether were 2- and 4-hydroxydiphenyl ether. Both 4-bromo- and 4-chlorodiphenyl ether were transformed to the corresponding products hydroxylated at the non-halogenated ring. Additionally, ring-cleavage products were detected by high perfomance liquid chromatography and characterized by gas chromatography/mass spectrometry and proton nuclear magnetic resonance spectroscopy. Unhalogenated diphenyl ether was degraded to 2-hydroxy-4-phenoxymuconic acid and 6-carboxy-4-phenoxy-2-pyrone. Brominated derivatives of both these compounds were formed from 4-bromodiphenyl ether, and 4-chlorodiphenyl ether was transformed in the same way to the analogous chlorinated ring cleavage products. Additionally, 4-bromo- and 4-chlorophenol were detected as intermediates from 4-bromo- and 4-chlorodiphenyl ether, respectively. In the presence of the cytochrome-P450 inhibitor 1-aminobenzotriazole, no metabolites were formed by cells of Trametes versicolor from the diphenyl ethers investigated. Cell-free supernatants of whole cultures with high laccase and manganese peroxidase activities were not able to transform the unhydroxylated diphenyl ethers used.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 67
    Electronic Resource
    Electronic Resource
    Springer
    Journal of thermal analysis and calorimetry 55 (1999), S. 681-690 
    ISSN: 1572-8943
    Keywords: chromia ; Fe-Cr alloy ; gas-solid reaction kinetics ; H2/H2O gas mixtures ; oxidation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The high-temperature oxidation behavior of a ferritic alloy (SUS 430) in a SOFC environment, corresponding to the anode (H2/H2O gas mixture) and cathode (air) operating conditions, was determined with regard to application of the alloy as a metallic separator material in SOFC. The oxidation kinetics of Fe-16Cr alloy (SUS 430), was studied by thermogravimetry in H2/H2O gas mixtures with pH/pHO=94/6 and 97/3 and in air, in the temperature range 1023-1223 K, for 3.6 up to 1080 ks. It was found that the protective oxide scale, composed mainly of Cr2O3 with uniform thickness and excellent adhesion to the metal substrate, grows in accordance with the parabolic rate law. The dependence of the parabolic rate constant, kp, of the scale on temperature obeys the Arrhenius equation: kp=6.8×10-4 exp (-202.3 kJ mol-1R-1T-1) for H2/H2O gas mixtures with pH/pHO=94/6. The determined kp was independent of the oxygen partial pressure in the range from 5.2×10-22 to 0.21 atm at 1073 K, which means that the rates of growth of the scale on Fe-16Cr alloy in the above-mentioned atmospheres are comparable. The oxidation test results on Fe-16Cr alloy in H2/H2O gas mixtures and air demonstrate the applicability of SUS 430 alloys as a separator for SOFC.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 68
    Electronic Resource
    Electronic Resource
    Springer
    Journal of thermal analysis and calorimetry 55 (1999), S. 981-987 
    ISSN: 1572-8943
    Keywords: nickel phosphates ; nickel phosphides ; Ni-P alloys ; oxidation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract DTA in conjuction with X-ray diffraction analysis with a high-temperature camera and infrared spectroscopy was employed to determine the mechanism of oxidation of Ni-P alloys. Amorphous Ni-P powders were obtained from a nickel(II) sulphate bath as a nickel source and sodium dihydrophosphate(I) as a reducing agent. The crystallization product is composed of two phases: (f.c.c.) Ni and (b.c.t.) Ni3P. The amorphous to crystalline transformation takes place in the temperature range 280–330°C. Ni3P samples were heated from room temperature to 1050°C in air atmosphere at 5°C min−1. It was found that the first stage of oxidation of Ni3P goes through the intermediate phase of Ni12P5 formation to Ni2P. Some exothermic reactions were observed. Heating runs were interrupted after each reaction for crystal structure determination by IR spectrometry. Infrared spectra are reported and it is shown that the structure units present in the amorphous products at about 700°C were the oxoanions PO3 − and P2O7 −. The final products of the oxidation process are NiO and Ni3(PO4)2.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 69
    Electronic Resource
    Electronic Resource
    Springer
    International journal of thermophysics 20 (1999), S. 299-308 
    ISSN: 1572-9567
    Keywords: high temperature ; metal ; spectral emissivity ; oxidation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Physics
    Notes: Abstract The normal spectral emissivity and its time variation were measured systematically for a total of thirty kinds of pure metals and alloys at temperatures between 780 and 1200°C. The spectral data were obtained at about 100 wavelengths from 0.55 to 5.3 μm under different environmental conditions including oxidation. The spectral data were stored in a database with supplementary information on the specimens. Clear oscillations of the spectral emissivity with time and wavelength were observed for nickel, Inconel, and SUS444 as surface oxidation progressed, while emissivity variations were rather monotonic for other metals such as titanium, cold-rolled steel, and SUS310S. The surface roughness was measured for all specimens by a contact-type instrument before the measurements, and recorded as supplementary information in the database. The database was built on a personal computer operating system (Windows95) to facilitate the dissemination to researchers and engineers interested in the emissivity of metals. Indexes to the emissivity data are metal name, wavelength, temperature, time, and degree of oxidation represented by an effective thickness of oxide film on the specimen surface.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 70
    Electronic Resource
    Electronic Resource
    Springer
    International journal of thermophysics 20 (1999), S. 289-298 
    ISSN: 1572-9567
    Keywords: high temperature ; metal ; spectral emissivity ; oxidation ; radiation thermometer
    Source: Springer Online Journal Archives 1860-2000
    Topics: Physics
    Notes: Abstract A system for measuring time variations of the normal spectral emissivity at wavelengths ranging from 0.55 to 5.3 μm was developed and applied to metal specimens in vacuum and oxidizing environments in the temperature range from 780 to 1200° C. The specimen was heated to high temperatures by passing a direct current in a vacuum chamber, and the surface oxidation was controlled by a low-pressure oxidizing gas. The specimen temperature was measured by a single-band (0.9-μm) radiation thermometer viewing at a cavity formed in the specimen from the rear side. The front surface of the specimen was observed by a multiband (112-wavelength) radiation thermometer to measure the normal spectral emissivity. The effective normal spectral emissivity of the specimen cavity was evaluated to be 0.94±0.05 at a wavelength of 0.9 μm in comparison with a metal tube having a small blackbody hole on the rear. The measurement uncertainty of the normal spectral emissivitiy by the system was estimated to be 5 to 10% of the emissivity value in most of the interesting ranges of emissivities, temperatures, and wavelengths.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 71
    Electronic Resource
    Electronic Resource
    Springer
    Cellular and molecular neurobiology 19 (1999), S. 533-552 
    ISSN: 1573-6830
    Keywords: benzodiazepines ; cytochromes P450 ; oxidation ; reduction ; conjugation ; drug interactions
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Abstract 1. The benzodiazepines are among the most frequently prescribed of all drugs and have been used for their anxiolytic, anticonvulsant, and sedative/hypnotic properties. Since absorption rates, volumes of distribution, and elimination rates differ greatly among the benzodiazepine derivatives, each benzodiazepine has a unique plasma concentration curve. Although the time to peak plasma levels provides a rough guide, it is not equivalent to the time to clinical onset of effect. The importance of α and β half-lives in the actions of benzodiazepines is discussed. 2. The role of cytochrome P450 isozymes in the metabolism of benzodiazepines and in potential pharmacokinetic interactions between the benzodiazepines and other coadministered drugs is discussed. 3. Buspirone, an anxiolytic with minimal sedative effects, undergoes extensive metabolism, with hydroxylation and dealkylation being the major pathways. Pharmacokinetic interactions of buspirone with other coadministered drugs seem to be minimal. 4. Zopiclone and zolpidem are used primarily as hypnotics. Both are extensively metabolized; N-demethylation, N-oxidation, and decarboxylation of zopiclone occur, and zolpidem undergoes oxidation of methyl groups and hydroxylation of a position on the imidazolepyridine ring system. Zopiclone has a chiral centre, and demonstrates stereoselective pharmacokinetics. Metabolic drug–drug interactions have been reported with zopiclone and erythromycin, trimipramine, and carbamazepine. Reports to date indicate minimal interactions of zolpidem with coadministered drugs; however, it has been reported to affect the C max and clearance of chlorpromazepine and to decrease metabolism of the antiviral agent ritonavin. Since CYP3A4 has been reported to play an important role in metabolism of zolpidem, possible interactions with drugs which are substrates and/or inhibitors of that CYP isozyme should be considered.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 72
    Electronic Resource
    Electronic Resource
    Springer
    Cellular and molecular neurobiology 19 (1999), S. 133-140 
    ISSN: 1573-6830
    Keywords: Na/K-ATPase ; SH groups ; oxidation ; hydrogen peroxide ; hypochlorite ; antioxidants ; carnosine
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Abstract 1. Oxidative modification of Na/K-ATPase from brain and kidney has been studied. Brain enzyme has been found to be more sensitive than kidney enzyme to inhibition by both H2O2 and NaOCl. 2. The inhibition of Na/K-ATPase correlates well with the decrease in a number of SH groups, suggesting that the latter belong mainly to ATPase protein and are essential for the enzyme activity. We suggest that the differences in the number, location, and accessibility of SH groups in Na/K-ATPase isozymes predict their oxidative stability. 3. The hydrophilic natural antioxidant carnosine, the hydrophobic natural antioxidant α-tocopherol, and the synthetic antioxidant ionol as well as the ferrous ion chelating agent deferoxamine were found to protect Na/K-ATPase from oxidation by different concentrations of H2O2. The data suggest that these antioxidants are effective due to their ability to neutralize or to prevent formation of hydroxyl radicals.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 73
    ISSN: 1573-2932
    Keywords: diffusion coefficient ; gaseous oxygen ; mine tailings ; oxidation ; water content
    Source: Springer Online Journal Archives 1860-2000
    Topics: Energy, Environment Protection, Nuclear Power Engineering
    Notes: Abstract To evaluate the effectiveness of soil covers, column experiments were conducted on tailings protected by a three-layer soil cover and tailings directly exposed in the open laboratory for a period of 760 days. Periodic rain application was performed to simulate field conditions, and at four times during the experiments the pore water was completely flushed out of each column for analysis. Profiles of oxygen, temperature, and volumetric water content were measured throughout the experiment, and the post-testing pore water quality was also characterized. A one-dimensional semi-analytic diffusion model was used to simulate oxygen profiles in the uncovered tailings. Modelling performed using the geochemical code MINTEQ showed that in the laboratory, aluminium concentrations in the tailings pore water were controlled by Al(OH)SO4, sulphate by gypsum and Al(OH)SO4and iron by lepidocrocite in the upper half and by ferrihydrite in the lower half. In the field, however, the iron oxyhydroxide minerals formed in the oxidized zone appear to be dissolving. It was found that the cover was effective in preventing significant desaturation of the clay, even over a 150-day drying period. The covered tailings did not oxidize much during the experiments. In the uncovered tailings, oxygen modelling and examination of the geochemistry show that the rate of gross oxidation and the advancement of the oxidation front decreases with time. However, pore water quality is controlled by geochemical processes other than oxidation, as reported in the field.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 74
    ISSN: 1588-2837
    Keywords: V2O5−ZrO2 catalyst ; oxidation ; o-xylene ; temperature stability
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract It has been established that at high temperatures (above 450°C) the V2O5−ZrO2 catalyst exhibits a higher selectivity in the oxidation ofo-xylene to phthalic anhydride than does the conventional V2O5−TiO2(a) catalyst. The catalyst selectivity is found to increase with respect to partial oxidation ofo-xylene, the valuable by-product maleic anhydride being obtained. Studies by different physicochemical methods have shown that V2O5−ZrO2 undergoes no significant phase and structural changes under high-temperature conditions.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 75
    Electronic Resource
    Electronic Resource
    Springer
    Reaction kinetics and catalysis letters 58 (1996), S. 323-328 
    ISSN: 1588-2837
    Keywords: Formaldehyde ; oxidation ; molybdena ; methanol
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract A molybdena-silica catalyst showed rapid deactivation in the oxidation of formaldehyde to carbon oxides. The deactivation was greatly retarded by adding water in the feed. Thus, water coproduced in the partial oxidation of methanol to formaldehyde contributes to the relatively stable activity of the molybdena-silica catalyst in the partial oxidation reaction.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 76
    Electronic Resource
    Electronic Resource
    Springer
    Reaction kinetics and catalysis letters 66 (1999), S. 97-104 
    ISSN: 1588-2837
    Keywords: Heterogeneous catalysis ; oxidation ; temperature hysteresis
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The temperature hysteresis observed in the oxidation of CO on both supported and unsupported catalysts can be explained by the local overheating of active centers rather than by transitions from one steady state to another.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 77
    ISSN: 1588-2837
    Keywords: Catalyst ; ceramic foam ; molten salt ; Nox ; oxidation ; soot
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Diesel soot is combusted simultaneously by two reactions: combustion with NO2 and combustion with O2 with the aid of a molten salt catalyst. Both reaction pathways should always be considered to avoid misinterpretation of experimental data.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 78
    Electronic Resource
    Electronic Resource
    Springer
    Reaction kinetics and catalysis letters 57 (1996), S. 3-11 
    ISSN: 1588-2837
    Keywords: Dehydrogenation ; oxidation ; propane ; propylene
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract At temperatures near 650°C and residence times ofca. 3 s, the homogeneous oxidative dehydrogenation (OXD) of propane to propylene and ethylene approached oxygen limiting conditions, even when the reactor was filled with quartz chips. The addition of catalysts that are known to be effective in the OXD of ethane slightly increased the reaction rate, but the selectivities at a given conversion level were the same as those that were achieved in the homogeneous reaction.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 79
    Electronic Resource
    Electronic Resource
    Springer
    Reaction kinetics and catalysis letters 68 (1999), S. 285-289 
    ISSN: 1588-2837
    Keywords: Enthalpy ; chain propagation ; oxidation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract A calculation of the enthalpies of elementary steps of the intra- and intermolecular chain propagation for model oxidation reactions of ethers, esters, ketones and hydrocarbons has been carried out. The heats of the intermolecular and intramolecular transfer of free valence with participation of peroxy radicals and C−H bond of the oxygen-containing compounds are shown to be comparable.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 80
    Electronic Resource
    Electronic Resource
    Springer
    Reaction kinetics and catalysis letters 68 (1999), S. 325-330 
    ISSN: 1588-2837
    Keywords: vitrification ; glass structure ; oxidation ; solid phase kinetics
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The capture of oxygen molecules by deep traps during oxygen diffusion in butanol glasses has been studied at 77 K as the kinetics of thetert-butyl radical oxidation. Slow glass formation in the samples increases the concentration of deep traps in the matrix. The total value of nonrelaxed free volume has no effect on the concentration of deep traps. It is assumed that trap formation is due to the formation of certain molecular structures below room temperature, most probably, with dissolved gas molecules.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 81
    ISSN: 1588-2837
    Keywords: Iron porphyrin catalyst ; oxidation ; lignin
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract In the presence of a catalyst consisting of metal-porphyrin complex and a reductant, anisole was converted into phenol by molecular oxygen at room temperature with a total turnover of the catalyst of about 70 times in 24 h.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 82
    Electronic Resource
    Electronic Resource
    Springer
    Reaction kinetics and catalysis letters 66 (1999), S. 169-175 
    ISSN: 1588-2837
    Keywords: 1,3-pentadiene ; oxidation ; vanadyl ion ; HZMS-5
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Different methods and vanadium compounds have been used to carry out proton exchange of zeolite HZSM-5 by vanadium cations. The catalysts are characterized by specific surface area, XRD, IR spectroscopy and TPD of ammonia. The catalysts’ activity in the oxidation of 1,3-pentadiene and the selectivity to carbonyl compounds are compared.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 83
    Electronic Resource
    Electronic Resource
    Springer
    Reaction kinetics and catalysis letters 66 (1999), S. 63-70 
    ISSN: 1588-2837
    Keywords: Non-stationary kinetics ; alkylbenzene ; oxidation ; oxide catalysts
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract A non-stationary kinetic model for deep oxidation of aromatic hydrocarbons based on the fragmentation theory approach is proposed. The model is simple and provides qualitative adequacy and good quantitative description of experimental results.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 84
    Electronic Resource
    Electronic Resource
    Springer
    Reaction kinetics and catalysis letters 68 (1999), S. 237-242 
    ISSN: 1588-2837
    Keywords: Diols ; oxidation ; ozone ; kinetics
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The kinetics of the oxidation of diols by ozone was investigated by a spectrophotometric method in the temperature interval of 277–304 K. The activation parameters of the reaction were determined.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 85
    Electronic Resource
    Electronic Resource
    Springer
    Reaction kinetics and catalysis letters 68 (1999), S. 257-263 
    ISSN: 1588-2837
    Keywords: Alphatic alcohols ; oxidation ; ozone ; kinetics
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The kinetics of oxidation of aliphatic alcohols by ozone in aqueous solutions was investigated in the temperature interval of 292–317 K. The activation parameters of the reaction were determined. The dissociation energies of CH-bonds of the studied substrates were calculated with the use of the AM1 semiempirical method.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 86
    ISSN: 1588-2837
    Keywords: Heteropoly acids ; dialkylquinones ; preparation ; oxidation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract A new method is proposed for synthesis of 2,6-dialkyl-1,4-benzoquinones by oxidation of 2,6-dimethyl and 2,6-di-tert-butylphenols with oxygen in a two-phase “water-organic” system in the presence of P−Mo−V heteropoly acids.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 87
    ISSN: 1588-2837
    Keywords: Mechanism ; oxidation ; methyl phenyl sulfide ; hydrogen peroxide ; titanium-substituted heteropolytungstates ; peroxo complexes
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Acid tetrabutylammonium salts of Ti(IV)-monosubstituted heteropolytungstate, PW11TiO40 5−, show high catalytic acitivity in the oxidation of methyl phenyl sulfide with hydrogen peroxide, while the corresponding tetrabutylammonium salts containing no protons are poor catalysts for this reaction.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 88
    Electronic Resource
    Electronic Resource
    Springer
    Reaction kinetics and catalysis letters 66 (1999), S. 245-249 
    ISSN: 1588-2837
    Keywords: Montmorillonite clay ; peroxodiphosphate ; oxidation ; benzylic alcohols
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Clay-supported potassium peroxodiphosphate efficiently oxidizes benzylic alcohols to the corresponding aldehydes without overoxidation to acids. H3P2Og − as the active species.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 89
    Electronic Resource
    Electronic Resource
    Springer
    Reaction kinetics and catalysis letters 67 (1999), S. 83-88 
    ISSN: 1588-2837
    Keywords: Manganese/ruthenium catalysts ; oxidation ; alkanes ; tert-butyl hydroperoxide
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Di- and trinuclear clusters of manganese and ruthenium were used as catalysts in the oxidation of alkanes in the presence oftert-butyl hydroperoxide as oxidant. The investigations reveal marked differences in the reactivity of the manganese and ruthenium catalysts though structurally they have similar coordination environment. The probable mechanism of hydroxylation in these systems is discussed.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 90
    Electronic Resource
    Electronic Resource
    Springer
    Reaction kinetics and catalysis letters 67 (1999), S. 359-364 
    ISSN: 1588-2837
    Keywords: Mechanism ; oxidation ; alkylperoxo complexes of titanium(IV) ; 13C NMR spectroscopy
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Using13C and1H NMR spectroscopy, titanium(IV) alkylperoxo complexes Ti(OOtBu)n(OiPr)4−n with n=1, 2, 3 and 4 were characterized in the reaction of Ti(OiPr)4 withtBuOOH in CH2Cl2 and CDCl3.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 91
    ISSN: 1573-1561
    Keywords: Orthoptera ; Acrididae ; grasshopper ; Melanoplus sanguinipes ; Phoetaliotes nebrascensis ; peritrophic envelope ; peritrophic membrane ; hydrolyzable tannin ; tannic acid ; oxidation ; hydrolysis
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology , Chemistry and Pharmacology
    Notes: Abstract We examined several of the mechanisms that have been reported to enable polyphagous grasshoppers (Orthoptera: Acrididae) to tolerate ingested hydrolyzable tannins: hydrolysis, adsorption on the peritrophic envelope, and peritrophic envelope impermeability. None of these mechanisms explain the tolerance ofMelanoplus sanguinipes to ingested tannic acid. In this species, tannin hydrolysis was 12–47% complete, adsorption accounted for less than 1% of the tannic acid contained in the midgut, and the peritrophic envelope was permeated by several gallotannins. The foregut is the main site for the chemical transformation of tannic acid in this species. InPhoetaliotes nebrascensis, hydrolysis was more extensive (82% complete), but the peritrophic envelope was readily permeated by two gallotannins. Oxidizing redox conditions were found in the guts of both species, and ingested tannins were oxidized inM. sanguinipes. We hypothesize that the tolerance of some polyphagous grasshoppers to ingested hydrolyzable tannins may be the consequence of their ability to tolerate the reactive oxygen species generated by polyphenol oxidation, whereas others may rely on rapid and extensive hydrolysis.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 92
    Electronic Resource
    Electronic Resource
    Springer
    International journal of peptide research and therapeutics 6 (1999), S. 359-369 
    ISSN: 1573-3904
    Keywords: chemotaxis ; inflammation ; oxidation ; post-translational ; S100
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Summary The functional importance of members of the S100 Ca2+-binding protein family is recently emerging. A variety of activities, several of whcih are apparently opposing, are attributed to S100A8, a protein implicated in embryogenesis, growth, differentiation, and immune and inflammatory processes. Murine (m) S100A8 was initially described as a chemoattractant (CP-10) for myeloid cells. It is coordinately expressed with mS100A9 (MRP14) in neutrophils and the non-covalent heterodimer is presumed to be the functional intracellular species. The extracellular chemotactic activity of mS100A8, however, is not dependent on mS100A9 and occurs at concentrations (10−13-10−11 M) at which the non-covalent heterodimer would probably dissociate. This review focuses on the structure and post-translational modifications of mS100A8/A9 and their effects on function, particularly chemotaxis.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 93
    Electronic Resource
    Electronic Resource
    Springer
    International journal of peptide research and therapeutics 6 (1999), S. 359-369 
    ISSN: 1573-3904
    Keywords: chemotaxis ; inflammation ; oxidation ; post-translational ; S100
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The functional importance of members of the S100 Ca2+-binding protein family is recently emerging. A variety of activities, several of which are apparently opposing, are attributed to S100A8, a protein implicated in embryogenesis, growth, differentiation, and immune and inflammatory processes. Murine (m) S100A8 was initially described as a chemoattractant (CP-10) for myeloid cells. It is coordinately expressed with mS100A9 (MRP14) in neutrophils and the non-covalent heterodimer is presumed to be the functional intracellular species. The extracellular chemotactic activity of mS100A8, however, is not dependent on mS100A9 and occurs at concentrations (10-13–10-11 M) at which the non-covalent heterodimer would probably dissociate. This review focuses on the structure and post-translational modifications of mS100A8/A9 and their effects on function, particularly chemotaxis.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 94
    Electronic Resource
    Electronic Resource
    Springer
    Russian chemical bulletin 45 (1996), S. 153-155 
    ISSN: 1573-9171
    Keywords: polyfluorinated thiophenols ; difluorochloromethane ; reactions ; aryldifluoromethyl sulfides ; oxidation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Polyfluorinated aryldifluoromethyl sulfides have been obtained by treatment of polyfluorinated 4-X-substituted thiophenols with chlorodifluoromethane in an alkaline medium. Reactions of difluoromethylpentafluorophenyl sulfide with H2O2, KMnO4, and HNO3, giving the corresponding sulfoxide and sulfone, were studied.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 95
    ISSN: 1573-9171
    Keywords: methane ; oxidation ; cool names ; kinetic simulation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Experimental studies and kinetic simulation have shown that the formation of cool flames is as typical of oxidation of methane as of oxidation of its homologs. Phenomena peculiar to the cool-flame processes in closed systems are observed, namely, the region of a negative temperature coefficient of the reaction, single and double cool-flame flashes, two stage ignition, and light radiation in the range of luminescence of formaldehyde.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 96
    Electronic Resource
    Electronic Resource
    Springer
    Russian chemical bulletin 45 (1996), S. 2386-2388 
    ISSN: 1573-9171
    Keywords: metal complex catalysis ; oxidation ; hydrogen peroxide ; vanadium complexes ; alkanes ; activation of the C-H bond
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Lower alkanes (ethane, propane,n-butane,n-pentane) are readily oxidized in acetonitrile solvent by H2O2 with vanadate anion — pyrazine-2-carboxylic acid (PCA), as the catalyst at 75 °C and pressures of −3 atm to produce predominantly or exclusively ketones (aldehydes). Isobutane is transformed selectively intotert-butyl alcohol. The oxidation of cyclohexane at 26 °C in acetone or acetic acid is less efficient than in acetonitrile. The reaction does not occur intert-butyl alcohol.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...