ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • INSTRUMENTATION AND PHOTOGRAPHY  (690)
  • 2025-2025
  • 2010-2014
  • 1980-1984  (306)
  • 1970-1974  (384)
  • 1930-1934
  • 1984  (306)
  • 1974  (384)
Collection
Keywords
Years
  • 2025-2025
  • 2010-2014
  • 1980-1984  (306)
  • 1970-1974  (384)
  • 1930-1934
Year
  • 1
    facet.materialart.
    Unknown
    Distortion measurement of antennas under space simulation conditions with high accuracy and high resolution by means of holography (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The use of laser holography for measuring the distortion of antennas under space simulation conditions is described. The subject is the so-called double exposure procedure which allows to measure the distortion in the order of 1 to 30/micrometers + or - 0.5 per hologramme of an area of 4 m diameter max. The method of holography takes into account the constraints of the space simulation facility. The test method, the test set up and the constraints by the space simulation facility are described. The results of the performed tests are presented and compared with the theoretical predictions. The test on the K-Band Antenna e.g., showed a distortion of approximately 140/micrometers + or - 5/micrometers measured during the cool down from -10 C to -120 C.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center 13th Space Simulation Conf.; p 309-319
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 2
    facet.materialart.
    Unknown
    RIMSTAR: Rapid image scanning technology and archiving (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Conventional schemes for digitizing large volumes of photographic data are far too costly and time consuming to encourage the undertaking of the ambitious projects using traditional technology. There is a distinct need for fast digitizing systems such as could be derived from development of large format, optically multiplexed CCD systems designed to address these problems. The use of CCD chips for data handling and the capability of using polaroids in the optical path for reduced light scattering are discussed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 419-427
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 3
    facet.materialart.
    Unknown
    Photographic surveys of the southern sky (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Parameters of the UK 1.2 meter Schmidt telescope are described. Plates taken with this instrument are in two categories, those for systematic sky surveys and those taken at the request of research users. A collaborative project with the European Southern Observatory was undertaken to obtain a two-color survey of the sky south of -20 deg declination to complement the Palomar survey. A near infrared survey of the Galactic Plane and the Megallanic Clouds is being done. The area south of -20 deg and the zone between 0 deg and -15 deg are also being surveyed. Pending a decision on survey parameters, all available A quality prism plates are being retained to form a basis for systematic survey. Nearly half the plates taken on a service basis for the UK astronomical community are to fulfill nonsurvey requests. Plates taken for surveys which are not of A grade quality are also made available for research purposes.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 379-385
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 4
    facet.materialart.
    Unknown
    The preparation of the measurements at the PDS at the Padova Observatory: Report on an experience with the development of an astronomical data base environment (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Some software facilities used mainly for information retrieval and analysis at the Padova-Asiago Observatory are discussed. These facilities help guest and resident astronomers to make easier the preparation of plate measurements. The problems connected with the creation, use and management of a data base in a scientific (astronomical) environment are reviewed on the basis of the experience gathered during the last three years. The development plan of the user session environment and its possible applications in a computer network are briefly sketched.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 361-369
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 5
    facet.materialart.
    Unknown
    Plans for a fast image recording system at ESO (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A 256 diode-array will be installed as detector on the ESO OPTRONICS S-3000 measuring machine in order to increase the acquisition rate. A high intensity LED will be used as light source in a pulse mode. The data will be stored on a random access mass storage device as density values for later education. The scanning time for a 30 cm x 30 cm plate with a step size of 10 micron will be less than 10 hours while the dynamic range of the data is expected to be 2.5 density units with an offset of at least 1 unit.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 317-328
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 6
    facet.materialart.
    Unknown
    The automated photographic measuring facility at Cambridge (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The design and performance of the automated photographic measuring facility at Cambridge is described. It consists of a precision laser scanning microdensitometer connected to a series of computers that process the data on-line. Plates up to 350 mm square can be measured. The microdensitometer samples the plate to 12 bit accuracy at a speed of 230,000 samples/second. The positional accuracy is better than a micron. Other features include platen rotation and automatic focus.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 277-288
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 7
    facet.materialart.
    Unknown
    Techniques of isophotometry (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The expected performance of the Minnesota automated dual-plate scanner (APS) is discussed with regard to photometry, position measurement accuracy, and ability to classify images. In addition, a fast algorithm for calculating image parameters is described.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 267-276
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 8
    facet.materialart.
    Unknown
    The current status and future upgrade of the PDS at the Royal Greenwich Observatory (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Various aspects of the performance of the PDS 1010A microdensitometer are described. The primary points in an upgrade propsal for the unit are outlined. Photometric instabilities in the PDS are mentioned.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 129-134
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 9
    facet.materialart.
    Unknown
    Microdensitometer electronics modification (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Minor modifications of electronic components in the PDS 1010A microdensitometer are discussed. The operational requirements and performance limitations of the PDS are noted. Replacement of the photomultiplier and front-end analog circuitry significantly improved the photometric performance of the PDS. The improvement in density repeatability is marked, and the permissible density slew speed is greatly increased.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 121-128
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 10
    facet.materialart.
    Unknown
    Performance testing of the high altitude observatory PDS microdensitometer (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: High Altitude Observatory HAO microdensitometer undergoes monthly testing to assure its consistent performance. These tests check positional and photometric stability at the 10 micron aperture level. The HAO test procedure is designed to run without operator intervention following initial configuration of the microdensitometer for each subprocedure. Specialized test software is resident in the PDP 8. The operator selects the proper subprocedure by entering commands. Once computer control is established, it is not relinquished until the test is complete.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Astron. Microdensitometry Conf.; p 19-34
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 11
    facet.materialart.
    Unknown
    Diagnosing a PDS microdensitometer (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A number of diagnostic tests are developed for the Photometric Data System PDS 2020G microdensitometer to monitor its performance and to isolate various electromechanical problems. A number of tests which help to diagnose problems with the photometer, positional accuracy and data collection are described. The tests include: (1) scanning a razor blade edge to study the response of the photometer and zero point losses in the coordinate system, (2) scanning a long straight line to evaluate the drunkness of the stage motions, (3) scanning photometric step wedge calibrations to study the response of the photometer, and (4) measurement of a series of high signal to noise plates of the same region of the sky to evaluate the overall performance of the microdensitometer. A variety of electronic tests to isolate electromechanical problems are also performed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 3-18
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 12
    facet.materialart.
    Unknown
    Ruled and holographic gratings experiment (A0138-5) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The behavior of ruled and holographic gratings with various coatings after extended exposure to the space environments was examined. The coatings and differentiating between the influences of vacuum and solar illumination were examined. In the past, several ruled and holographic gratings with various coatings were successfully flown on rocket experiments. Future utilizations of such gratings are considered for the Space Telescope and for various Spacelab projects under development. The techniques which is used to replicate gratings can also be used to obtain a wide range of lightweight optical components, including sophisticated aspherical, highly polished mirrors.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 163-164
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 13
    facet.materialart.
    Unknown
    Holographic data storage crystals for LDEF (A0044) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Electro-optic holographic recording systems were developed. The spaceworthiness of electro-optic crystals for use in ultrahigh capacity space data storage and retrieval systems are examined. The crystals for this experiment are included with the various electro-optical components of LDEF experiment. The effects of long-duration exposure on active optical system components is investigated. The concept of data storage in an optical-phase holographic memory is illustrated.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 152-153
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 14
    facet.materialart.
    Unknown
    Multiple-foil microabrasion package (A0023) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The specific scientific objectives of this experiment are to measure the spatial distribution, size, velocity, radiance, and composition of microparticles in near-Earth space. The technological objectives are to measure erosion rates resulting from microparticle impacts and to evaluate thin-foil meteor 'bumpers'. The combinations of sensitivity and reliability in this experiment will provide up to 1000 impacts per month for laboratory analysis and will extend current sensitivity limits by 5 orders of magnitude in mass.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 117-120
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 15
    facet.materialart.
    Unknown
    Automated analysis of video data (1974)
    In:  CASI
    Details
    Publication Date: 2006-05-07
    Description: A software/hardware system designed and developed to perform automated video imagery analysis is described. Major elements included in the analysis system are: (1) sampling oscilloscope; (2) programmable trigger unit; (3) central computer; and (4) software processing library. The function of the scope and trigger unit, in conjunction with the control computer, is to digitize the selected portion of the video image and store as amplitude and time data in computer memory. Evaluation of the video data, analogus to interpretation of a visual image, is accomplished by the processing software. It is indicated that this technique of video image analysis is applicable to a wide variety of nonaerospace applications involving video data and image analysis.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Chamber of Commerce Proc. of the 1st 1974 Technol. Transfer Conf.; p 181-188
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 16
    facet.materialart.
    Unknown
    Apparatus for calibration of on-board instruments and laboratory modelling of rarefied plasma flows past models (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: Problems of laboratory simulation of artificial earth satellite flight conditions in the ionosphere are examined, and a setup capable of reproducing the basic parameters of ion flows (with energies of 5-10 eV, energy spectrum width approximately 2x5 eV, and an intensity of 10 to the minus 8th power a/cm/2) past measurement instruments and satellite models is described. Possibilities for further improvement of the apparatus are discussed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Interplanet. Medium and Phys. of the Magnetosphere (NASA-TT-F-784); p 282-291
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 17
    facet.materialart.
    Unknown
    Use of conventional equipment to measure the effective perceived noise level of aircraft (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: A real time, computerized, measurement method for the effective perceived noise level is reported that uses comparison of two sounds differing in level and frequency to obtain the noise intensity emitted by aircraft and to calculate human psychoacoustic annoyance reactions.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: the 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 224-232
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 18
    facet.materialart.
    Unknown
    An objective method and measuring equipment for noise control and acoustic diagnostics of motorcars (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: An objective method and apparatus for noise control and acoustic diagnostics of motorcar engines are reported. The method and apparatus let us know whether the noisiness of the vehicle under test exceeds the admissible threshold levels given by appropriate standards and if so what is the main source of the excessive noise. The method consists in measuring both the overall noise level and the sound pressure levels in definite frequency bands while the engine speed is controlled as well and may be fixed at prescribed values. Whenever the individually adjusted threshold level has been exceeded in any frequency band, a self-sustaining control signal is sent.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: The 4th Natl. Conf. on Acoustics Vol. 1A (NASA-TT-F-15375); p 198-204
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 19
    facet.materialart.
    Unknown
    Photoelectronic vibrometer with polarized light (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: A seismic torsiometer is described which is based on the reception by a photosensitive transducer of a light flux modulated by a relative rotation of the optical axes of two polaroids. The torsional vibrations of the polaroid fixed to the shaft are transmitted to the other polaroid (which at the same time is the seismic mass of the apparatus) by means of elastic lamellas. The device can work as accelerometer, vibrometer or frequency meter, depending on the value of the ratio between the proper oscillation frequency of the seismic system and the measured vibration frequency.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 68-72
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 20
    facet.materialart.
    Unknown
    Vibration and noise measuring instruments built in the RSR (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: The demands placed upon vibration and noise measuring instruments are discussed. The instruments that are now being manufactured in the RSR are described, as well as those that are being made ready for manufacture, namely: the VP-3 portable vibrometer, the N2103 precision electronic vibrometer, the N2103 B sonometric preamplifier, as well as vibration transducers of the electrodynamic and piezoelectric types.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 62-67
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 21
    facet.materialart.
    Unknown
    Contributions to the problem of piezoelectric accelerometer calibration (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: After discussing the principal calibration methods for piezoelectric accelerometers, an experimental setup for accelerometer calibration by the reciprocity method is described It is shown how the use of a lock-in voltmeter eliminates errors due to viscous damping and electrical loading.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: The 4th Natl. Conf. on Acoustics, Vol. 1A (NASA-TT-F-15375); p 55-61
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 22
    facet.materialart.
    Unknown
    Instruments for measuring radiant thermal fluxes (1974)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: An absolute two-sided radiometer, designed on the principle of replacing absorbed radiant energy with electrical energy, is described. The sensitive element of the detector is a thermoelectric transducer of thermal flux. The fabrication technology, methods of measurement, technical characteristics, and general operation of the instrument are presented.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Space Res. in the Ukraine, No. 3 (NASA-TT-F-15537); p 95-101
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 23
    facet.materialart.
    Unknown
    Computer simulation of the effects of transmission-averaging in microdensitometry (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: One of the principal advantages of electrography when compared to photography is the nearly linear relationship between source intensity versus resulting image density. This property allows for simplified and more accurate photometric calibration and permits a certain degree of extrapolation of the calibration to beyond the limits of the faintest photoelectric standard on an exposure. The desires to extract quantitative photometric information from electrographic (or photographic) negatives and to convert this information into a digital format for computer analysis or enhancement led to the widespread use of scanning microdensitometers to perform this A-to-D conversion. Therefore it is of vital importance to understand and, if practical, to avoid any nonlinearities which may be introduced during microdensitometry of electrographic emulsions.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 429-431
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 24
    facet.materialart.
    Unknown
    The role of the Automated Plate Measuring (APM) machine in developing a program to discover QSOs automatically (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The scanning of a direct plate with the automatic plate measuring machine which results in the automated selection and description of images is described. The selection of QSO candidates based on color-color diagrams constructed from the APM image data and the analysis of APM raster data for QSOs selected visually from objective prism plates are also discussed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 417-418
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 25
    facet.materialart.
    Unknown
    Next generation microdensitometer (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The fundamental limitations of microdensitometers are reviewed and the design of a high microdensitometer described. The system will digitize to 16 bits in transmission at a speed of 100 kHz using a laser beam moving over the emulsion. Other features are automatic platen rotation and autofocus. The cost will be of order $200,000.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 333-341
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 26
    facet.materialart.
    Unknown
    A new measuring machine in Paris (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A new photographic measuring machine is under construction at the Paris Observatory. The amount of transmitted light is measured by a linear array of 1024 photodiodes. Carriage control, data acquisition and on line processing are performed by microprocessors, a S.E.L. 32/27 computer, and an AP 120-B Array Processor. It is expected that a Schmidt telescope plate of size 360 mm square will be scanned in one hour with pixel size of ten microns.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 329-332
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 27
    facet.materialart.
    Unknown
    A preliminary analysis of a diode array for densitometry (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A diode-array based image digitizer manufactured by the Eikonix Corp. was tested to see if it can be adapted to the exacting requirements of astronomical densitometry. As the device is presently configured, a dynamic range of 400:1 can be achieved routinely, with a positional accuracy of 2 microns or better. An area of 2048 X 2048 pixels can be scanned in about 5 minutes. Preliminary tests indicate that several relatively simple enhancements can improve both the photometric and the positional accuracy of the device.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 307-315
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 28
    facet.materialart.
    Unknown
    A next generation microdensitometer? (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Motivations for construction of a next generation microdensitometer (NGM) are presented and their effect on the NGM design is discussed. A prototype of such an engine has been constructed at KPNO. Its design and performance is reviewed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 291-305
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 29
    facet.materialart.
    Unknown
    Why use a microdensitometer other than a PDS? (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The motivations for constructing a special purpose built microdensitometer are explored. The salient points of some of the microdensitometers are described and the advantages and disadvantages of the system in comparison to a PDS machine are outlined. The principal gain is in speed though at the expense of loss in dynamic range. The effects on the astronomical results are demonstrated. The astronomical results already obtained with these machines and from ongoing projects are described. It is shown that there is a large class of important astronomical problems which can be tackled by these machines but which are not feasibile on the PDS because of the speed of the machine.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 209-228
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 30
    facet.materialart.
    Unknown
    Improvements to the Photometric response and positional accuracy of the Yale PDS 2020G microdensitometer (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The necessity to incorporate several hardware changes to optimize the Yale PDS 2020G microdensitometer for photometric and astrometric research are discussed. The properties of a new high speed photometer and a positional calibration system are described. The new photometer incorporates a high speed logarithmic analog to digital converter with more than 10 times the resolution of the former system and a cycle time of approximately 50 usec. The positional calibration system monitors the drunkenness of the stages with respect to fixed index lines and enables the correction of the +/- 5 micro stage errors to an accuracy of better than 1 micro.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 151-161
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 31
    facet.materialart.
    Unknown
    Performance of the ESO PDS (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The astrometric and photometric performance of the PDS 1010A microdensitometer are discussed, including the tests used for checking it. The instrument was shown to satisfy operational requirements for photometric measurements of astronomical plates with respect to dynamic range and stability.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 89-95
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 32
    facet.materialart.
    Unknown
    Characteristics of the MSFC, PDS microdensitometer (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The results of several parametric studies carried out on the Marshall Space Flight Center (MSFC) Photometric Data System PDS-10 microdensitometer are summarized for the purposes of documenting the operation and limitations of the system for inhouse research and to provide a bench mark for comparison with other microdensitometers. The results are grouped into four general areas. These are: (1) system overall stability to drift, (2) photometric linearity and noise, (3) reproducibility, and (4) scanning performance. Test data taken in order to evaluate the interdependency of scan speed, noise and position are included. Shown also are results of tests for system stability, reproducibility, stray light and PMT settling time.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Marshall Space Flight Center Astron. Microdensitometry Conf.; p 71-88
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 33
    facet.materialart.
    Unknown
    Microdensitometer errors: Their effect on photometric data reduction (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The performance of densitometers used for photometric data reduction of high dynamic range electrographic plate material is analyzed. Densitometer repeatability is tested by comparing two scans of one plate. Internal densitometer errors are examined by constructing histograms of digitized densities and finding inoperative bits and differential nonlinearity in the analog to digital converter. Such problems appear common to the four densitometers used in this investigation and introduce systematic algorithm dependent errors in the results. Strategies to improve densitometer performance are suggested.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 45-58
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 34
    facet.materialart.
    Unknown
    Experiences with a PDS 2020 GM (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Various perturbations which occurred during the operation of a PDS 2020 GM microdensitometer are reviewed. The effects of elevated temperature, vibration, transient electrical noise, and photometric perturbations are briefly discussed. Sample astronomical results from the PDS 2020 GM unit are presented.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 97-106
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 35
    facet.materialart.
    Unknown
    Positive-feedback photometric drift in the PDS (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Digitizing flatfield images produces conditions in the Photometric Data System PDS which cause the measured density to drift by as much as .1 DN during a 10 minute interval. The drift occurs when the PDS, set up in equilibrium at fog level, subsequently scans a reasonably dense region for periods of longer than a few minutes. The drift is manifested primarily as a positive shift in density that is approximately the same for all densities. If the fog level is assumed to be in fact constant and is monitored during scans of flat fields, the PDS drift may be removed by subtracting the difference between the observed fog level and its assumed constant value for each pixel. This function is then smoothed and subtracted, as a function of scan line, from the measured density. The fog level is then adjusted to a standard value by adding a constant. The result is a flattened scan with PDS drift removed to the accuracy within which the fog level drift matches the drift at other levels.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Astron. Microdensitometry Conf.; p 59-69
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 36
    facet.materialart.
    Unknown
    Photometric and positional accuracy of the PDS Bonn in view of astronomical requirements (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The photometric and positional accuracy of a microdensitometer is examined. A calibrating plate with different density areas available is used to determine photometric accuracy. Position accuracy is evaluated by multiple scans of sharp edges and analyzed statistically.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Astron. Microdensitometry Conf.; p 35-43
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 37
    facet.materialart.
    Unknown
    LDEF thermal measurements system (P0003) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Many of the passive experiments flying on LDEF will be significantly enhanced if data are available postflight to indicate the temperature time histories of test materials and other specimens exposed in the experiments. The baseline LDEF approach was to provide postflight calculated temperature histories of experiment boundaries and solar flux data for the mission, which can in turn be used by each investigator to calculate the temperature time histories for critical experiment components. Without in-flight temperature measurements, a substantial uncertainty will exist in the calculated temperatures. The data measured by the themal measurement system (THERM) will significantly improve postflight knowledge of temperatures experienced by LDEF experiments. The THERM data will also be valuable in validating the LDEF thermal design concept and in providing better design data for experimenters on future LDEF missions. The objectives of this experiment are to determine the history of the interior average temperatures of the LDEF for the total orbital mission and to measure the temperatures of selected components and thermal boundary conditions.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Long Duration Exposure Facility (LDEF); p 78-81
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 38
    facet.materialart.
    Unknown
    Determination of local values of gas and liquid mass flux in highly loaded two-phase flow (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A measurement system using a deceleration probe was designed for determining the local values of gas and liquid mass flux in various gas/liquid droplet sprayfields. The system was used to characterize two-phase flowfields generated by gas/liquid rocket-motor injectors. Measurements were made at static pressures up to 500 psia and injected mass flow ratios up to 20. The measurement system can also be used at higher pressures and in gas/solid flowfields.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 39
    facet.materialart.
    Unknown
    The neutral atmosphere temperature experiment (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The AEROS Neutral Atmosphere Temperature Experiment (NATE) is designed to measure the kinetic temperature of molecular nitrogen in the thermosphere. A quadrupole mass spectrometer tuned to N2 measures the N2 density variation in a small spherical antechamber having a knife-edged orifice which is exposed to the atmosphere at the outer surface of the spacecraft. The changing density of N2 due to the spinning motion of the spacecraft permits determination of the velocity distribution of the N2 from which the temperature is calculated. An alternate mode of operation of the instrument allows measurement of the other gases in the atmosphere as well as N2 permitting determination of the neutral particle composition of the atmosphere.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Zeitschrift fuer Geophysik; 40; 5, 19; 1974
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 40
    facet.materialart.
    Unknown
    Airborne laser Doppler velocimeter (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A CO2 laser Doppler detection system has been developed to measure remotely the true airspeed of an aircraft. The system uses a 50-W sealed-off CO2 laser in a homodyne detection system employing a collinear optical telescope, a HgCdTe detector, and a frequency tracking loop. The system was successfully flight-tested on a NASA Convair 990 research aircraft during December 1971 and June 1972. The results indicate that an airspeed measurement under clear weather conditions is feasible up to an altitude of 3000 m with an error of less than 0.5%.-
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 13; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 41
    facet.materialart.
    Unknown
    SAS-2 observations of gamma rays from the galactic plane (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Preliminary data are given for the SAS-2 high energy galactic gamma ray observation. These data include both latitude and longitude distributions. The longitude distribution shows a high density region. The latitude distributions toward the center and the anti-center are markedly different, the former showing a two-component structure of half-widths of approximately 3 and 6 deg. The energy spectrum in the range 35 to 200 MeV is hard, consistent with cosmic ray interactions with interstellar matter, including neutral pions decay and emission from energetic electron interactions. The data is consistent with an interpretation in terms of the confinement of the cosmic rays in the spiral arms.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: ESRO The Context and Status of Gamma Ray Astronomy; p 201-204
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 42
    facet.materialart.
    Unknown
    Evaluation of a wedge gas-sampling probe (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The performances of a wedge-type gas-sampling probe and pitot probes are compared in applications to flowfield profile studies. The flow structure data obtained by these techniques are found to agree well in flow regions with and without significant gradients. The wedge-type probe showed a good service life and allowed a substantial reduction of the sampling time. The wedge probe design is discussed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: AIAA Journal; 12; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 43
    facet.materialart.
    Unknown
    Real-time correction of atmospherically degraded telescope images through image sharpening (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: We present a new technique for the correction of atmospheric distortion in telescope images. Most of this distortion arises from a random phase variation of the incoming light across the telescope aperture. This variation limits the resolving power of even large telescopes to about one arc second. If the sharpness of the images is defined in a suitable way, this sharpness is maximized only when the phase distortion of the incoming light is zero. We present computer simulations of a simple feedback system in which active optical elements, set to maximize the sharpness, correct most of the atmospheric distortion. Photon statistics set the limiting magnitude of the object for which a practical feedback system can work. Details in a sixth magnitude object smaller than 0.1 sec of arc should be resolvable. The system can be conveniently employed within existing telescopes.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Optical Society of America; vol. 64
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 44
    facet.materialart.
    Unknown
    Aplanatic two-mirror telescopes: A systematic study. I - Cassegrainian configuration (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A systematic performance analysis of aplanatic Cassegrainian telescopes has been accomplished by means of a ray trace program. The results indicate that the available field angle for a given geometric spot size is, to a very close approximation, a function of the relative back focal distance only. Image curvatures, as computed by third-order theory and by the ray trace program, were found to be in very close agreement. Image curvature is plotted as a function of the ray height ratio for a wide range of secondary magnification.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 13; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 45
    facet.materialart.
    Unknown
    Image reproduction with interactive graphics (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Software application or development in optical image digital data processing requires a fast, good quality, yet inexpensive hard copy of processed images. To achieve this, a Cambo camera with an f 2.8/150-mm Xenotar lens in a Copal shutter having a Graflok back for 4 x 5 Polaroid type 57 pack-film has been interfaced to an existing Adage, AGT-30/Electro-Mechanical Research, EMR 6050 graphic computer system. Time-lapse photography in conjunction with a log to linear voltage transformation has resulted in an interactive system capable of producing a hard copy in 54 sec. The interactive aspect of the system lies in a Tektronix 4002 graphic computer terminal and its associated hard copy unit.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 13; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 46
    facet.materialart.
    Unknown
    Stellar interferometer for figure sensing of orbiting astronomical telescopes (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An interferometric device designed to be located in the focal plane of a large astronomical telescope is presented. The prime application is for the forthcoming large space telescope. The device is to perform interferometry on the optical wavefront arising from a single star after it has propagated through the telescope. The concept of a focal plane figure sensor has been experimentally verified by fabricating and testing an operating laboratory breadboard figure sensor. A set of linear independent control equations are derived that define the operations for utilizing a focal plane figure sensor in the control loops for the positioning of the secondary mirror and for the active control of the primary mirror optical figure. A number of scientific experiments that could be performed with the interferometer are also briefly discussed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 13; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 47
    facet.materialart.
    Unknown
    Raman scattering applied to hypersonic air flow (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The Raman scattering technique was applied to measure the local static temperature and gas number density over a sharp-edge flat-plate model in a Mach 5 nozzle of the Langley nozzle test chamber with air as the test gas. The angle of attack varied from -5 to 15 deg, and the stagnation temperature varied from 317 to 442 K, with stagnation pressures ranging from 170 kN to 2.8 MN/sq m. The measured values of static temperature and density ranged from 60 to 100 K and from 0.03 to 0.8 kg/cu m, respectively. A comparison with calculated values based on static pressure measurements along the model shows that the Raman scattering technique is a viable measurement method in applications to high-speed three-dimensional flows.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: AIAA Journal; 12; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 48
    facet.materialart.
    Unknown
    The response of a propeller anemometer to turbulent flow with the mean wind vector perpendicular to the axis of rotation (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Determination of the properties of the system transfer function of the vertical-velocity propeller anemometer. A treatment of this problem is presented which is based on an analysis of estimates of the system transfer function derived from estimates of spectra calculated from time histories of indicated vertical velocity and on estimates of the associated input Eulerian vertical-velocity frequency spectra based on the hypothesis that instrument degradation of the Fourier components occurs in the inertial subrange.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Boundary-Layer Meteorology; 6; May-June
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 49
    facet.materialart.
    Unknown
    Astronomical demonstration of an infrared upconverter (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An upconverter has been used to convert infrared photons from astronomical sources to higher frequency quanta that were detected with a pulse-counting photomultiplier photometer. It is pointed out that these observations represent the first successful astronomical demonstration of infrared upconversion. Upconversion is carried out in an optically nonlinear medium, which in the upconverter described is a lithium iodate crystal. A 0.6943-micrometer high peak power ruby laser pump was developed for the demonstration.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Nature; 249; June 14
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 50
    facet.materialart.
    Unknown
    An autoranging scanning system and compatible methods of noise reduction (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The autoranging scanning system discussed combines in a unique way four different methods for removing noise. The system employs a narrow-band amplifier. Other noise reduction methods make use of digital summation, convolution numbers, and the coaddition of scans. The system was designed to digitize the output of an infrared spectrometer and to record it on magnetic tape. Light passes through a mechanical light chopper and the spectrometer optics, and falls on the PbS cell to produce a signal which is amplified by the first preamplifier.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Review of Scientific Instruments; 45; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 51
    facet.materialart.
    Unknown
    Mathematical operations by optical processing (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Some recent developments in coherent optical processing are described in this paper. Specifically, the use of one or more elementary gratings to perform useful processing operations and computer-generated spatial filters to obtain generalized transforms are discussed. Applications incorporating nonlinear optical elements and optical feedback into the processing system are also presented.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Optical Engineering; 13; May-June
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 52
    facet.materialart.
    Unknown
    Turbulence measurements in a Mach 2.9 boundary layer using laser velocimetry (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Measurements taken in a Mach-2.9 turbulent boundary layer are shown to demonstrate the ability of a laser velocimeter to measure the turbulence transport properties of high-speed compressible flows. This demonstrated ability, combined with the nonperturbing quality and relative insensitivity to environmental conditions of the laser velocimeter, opens the way to compressible flow measurements never considered possible with more conventional measurement techniques.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: AIAA Journal; 12; May 1974
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 53
    facet.materialart.
    Unknown
    Detection and elimination of reflections in beam-foil target chambers (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Description of techniques for detecting and reducing to negligible values beam-radiation reflection and scattering in high vacuum target chambers used in beam foil experiments. It is suggested that all target chambers be checked in the manner described in order to discover and reduce intensity variations that may not be obvious on the usual beam-foil decay curves.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 13; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 54
    facet.materialart.
    Unknown
    Multiplex imaging with multiple-pinhole cameras (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: When making photographs in X rays or gamma rays with a multiple-pinhole camera, the individual images of an extended object such as the sun may be allowed to overlap. Then the situation is in many ways analogous to that in a multiplexing device such as a Fourier spectroscope. Some advantages and problems arising with such use of the camera are discussed, and expressions are derived to describe the relative efficacy of three exposure/postprocessing schemes using multiple-pinhole cameras.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Journal of Applied Physics; 45; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 55
    facet.materialart.
    Unknown
    Pressure transducer method for measuring gas production by microorganisms (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Microbiology; 27; Jan. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 56
    facet.materialart.
    Unknown
    Measurement of capsule heat transfer gaps using neutron radiography (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A technique is described for measuring heat transfer gaps from neutron radiographs. The method involves scanning the radiograph negative with a recording microdensitometer to obtain a trace of the optical density variation across the diameter of the capsule. The optical density change representing the gap is measured from the microdensitometer trace and related to the physical measurement. Heat transfer gaps from 0.061 to 0.178 cm have been determined by this technique and agree with preassembly physical measurements to plus or minus 0.005 cm.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Materials Evaluation; 32; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 57
    facet.materialart.
    Unknown
    Design of an X-ray telescope system for an orbiting astronomical observatory (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The design and construction is described of a package of X-ray telescopes launched in the NASA satellite Copernicus (OAO-3), which began stellar observations in September 1972. It contains three grazing incidence reflectors covering a range of wavelengths from 0.3 to 8 nm, and having a combined collecting area of 40.9 sq cm, with angular resolutions up to 1 minute of arc. This is believed to be the first satellite application of such reflectors in stellar X-ray astronomy. A collimated detector of wavelengths 0.1-0.3 nm has a 17.8 sq cm collecting area. A visible light star tracker detects package misalignment if this should occur.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Journal of Physics; vol. 7
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 58
    facet.materialart.
    Unknown
    Multichannel forward scattering meter for oceanography (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An instrument was designed and built that measures the light scattered at several angles in the forward direction simultaneously. The instrument relies on an optical multiplexing technique for frequency encoding of the different channels suitable for detection by a single photodetector. A Mie theory computer program was used to calculate the theoretical volume scattering function for a suspension of polystyrene latex spheres. The agreement between the theoretical and experimental volume scattering functions is taken as a verification of the calibration technique used.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 13; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 59
    facet.materialart.
    Unknown
    Effect of electron beam pulse width on time-of-flight spectra (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A simple but useful formula describing the effect of electron gun pulse width on the time of flight (TOF) spectra measured in translational spectroscopy experiments is developed. An approximately monoenergetic pulsed electrostatically focused electron beam traverses a scattering cell filled with a Maxwellian gas. Inelastic electron collisions with the gas produce metastable particles, ions, scattered electrons, and photons which then pass through a collimating slit system at right angles to the electron beam. TOF techniques are used to separate the photon signal from the metastable particle signal and to measure the TOF distribution of the metastable species.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Review of Scientific Instruments; 45; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 60
    facet.materialart.
    Unknown
    A simple two-fiber optical displacement sensor (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An optical displacement sensor is described in which only a pair of large-diameter fibers is used rather than a branched bundle of many small-diameter fibers. The basic idea of the two-fiber sensor is that the axes of the fibers are at an angle to one another at the sensor face, rather than parallel as is the case for the many-fiber configuration. The sensitivity of this two-fiber sensor is approximately the same as the most sensitive configuration of the many-fiber sensor.-
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Review of Scientific Instruments; 45; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 61
    facet.materialart.
    Unknown
    Stability of fringe counting interferometers (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Two configurations of an automatic bidirectional, fringe-counting corner-cube interferometer are compared. They differ only in the method of quadrature phase introduction. The one using polarization coding has good phase stability at optical path differences as large as 955 mm, the one using adjacent beams has such poor phase stability as to render it useless at path differences greater than 700 mm. A useful well-defined alignment procedure is given for the corner-cube interferometer.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Review of Scientific Instruments; 45; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 62
    facet.materialart.
    Unknown
    Thermal stress studies using optical holographic interferometry (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The application of holography to thermal stress studies is discussed. Interference fringes as produced by holograms and their interpretation are reviewed in relation to workpiece displacement. Three potential mechanisms are given to explain thermal displacement as detected by holographic methods. Results of some thermal stressing studies are reported, including tests on a live rocket motor.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Materials Evaluation; 32; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 63
    facet.materialart.
    Unknown
    Reduction of flow-measurement uncertainties in laser velocimeters with nonorthogonal channels (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Previously cited in issue 5, p. 642, Accession no. A83-16486
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: AIAA Journal (ISSN 0001-1452); 22; 1115-112
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 64
    facet.materialart.
    Unknown
    Requirements for a passive IR advanced moisture and temperature sounder (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The design of a high spectral resolution, lambda/delta lambda being approximately 1200 IR, sounder capable of increasing the vertical resolution of atmospheric temperature profiles and achieving a rms accuracy of approximately 1.5 K is discussed. This sounder permits improved determination of meteorological parameters on cloudiness, surface temperature, and air-surface interactions. A set of channels from the high J lines in the R branch of the 4.3-micron CO2 band complemented by a larger set of window, humidity, and temperature channels in the 3.7-, 6.3-, 9-, and 15-micron regions is used. Design and simulation studies show that such a sounder is within the present state of the art.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics (ISSN 0003-6935); 23; 979-989
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 65
    facet.materialart.
    Unknown
    Solar disk sextant (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: This paper presents the conceptual design of an instrument, called the solar disk sextant, to be used in space to measure the shape and the size of the sun and their variations. The instrumental parameters required to produce sufficient sensitivity to address the problems of solar oblateness, solar pulsations, and global size changes of climatic importance are given.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics (ISSN 0003-6935); 23; 1235-123
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 66
    facet.materialart.
    Unknown
    A laser interferometer for measuring skin friction in three-dimensional flows (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Previously cited in issue 05, p. 643, Accession no. A83-16685
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: AIAA Journal (ISSN 0001-1452); 22; 557-559
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 67
    facet.materialart.
    Unknown
    Simple high-temperature thermal diffusivity apparatus (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A simple and inexpensive thermal diffusivity apparatus is described for measurement up to 1600 K. The novel features of apparatus include a light pipe, a long furnace, and a differential thermocouple. A low heat-load sample holder for clamping the sample in a vertical position is also described. The results of measurements on AXM-5Q graphite are reported.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Review of Scientific Instruments (ISSN 0034-6748); 55; 235-237
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 68
    facet.materialart.
    Unknown
    The Harp probe - An in situ Bragg scattering sensor (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: A wave sensor, consisting of parallel, evenly spaced capacitance wires, whose output is the sum of the water surface deflections at the wires, has been built and tested in a wave tank. The probe output simulates Bragg scattering of electromagnetic waves from a water surface with waves; it can be used to simulate electromagnetic probing of the sea surface by radar. The study establishes that the wave probe, called the 'Harp' for short, will simulate Bragg scattering and that it can also be used to study nonlinear wave processes.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Journal of Atmospheric and Oceanic Technology (ISSN 0739-0572); 1; 358-371
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 69
    facet.materialart.
    Unknown
    Radiosonde pressure sensor performance - Evaluation using tracking radars (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: The standard balloon-borne radiosonde employed for synoptic meteorology provides vertical profiles of temperature, pressure, and humidity as a function of elapsed time. These parameters are used in the hypsometric equation to calculate the geopotential altitude at each sampling point during the balloon's flight. It is important that the vertical location information be accurate. The present investigation was conducted with the objective to evaluate the altitude determination accuracy of the standard radiosonde throughout the entire balloon profile. The tests included two other commercially available pressure sensors to see if they could provide improved accuracy in the stratosphere. The pressure-measuring performance of standard baroswitches, premium baroswitches, and hypsometers in balloon-borne sondes was correlated with tracking radars. It was found that the standard and premium baroswitches perform well up to about 25 km altitude, while hypsometers provide more reliable data above 25 km.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Journal of Atmospheric and Oceanic Technology (ISSN 0739-0572); 1; 321-327
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 70
    facet.materialart.
    Unknown
    A SAR correlation algorithm which accommodates large-range migration (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: This paper presents an algorithm for azimuth correlation of synthetic aperture radar (SAR) data with extraordinarily large-range migration which cannot be accommodated by the existing frequency domain interpolation approach used in current Seasat SAR processing. A mathematical model is provided for the SAR range-correlated point-target response both in the spatial and frequency domains. A simple and efficient processing algorithm derived from the exact two-dimensional correlation algorithm is given. This algorithm enables azimuth correlation by two cascaded one-dimensional correlation steps. The first step is to transform the range-correlated SAR data into the frequency domain in azimuth, followed by a newly developed range convolution filter to correct the range-dispersed spectrum of the range-correlated point-target response (RCPTR). The second step is the frequency-domain range migration correction approach for the azimuth compression. Simulation results provided here indicate that this processing algorithm yields a satisfactory compressed impulse response for SAR data with large-range migration whereas previous methods were subject to a broadening of the impulse response along range.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: IEEE Transactions on Geoscience and Remote Sensing (ISSN 0196-2892); GE-22; 592-597
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 71
    facet.materialart.
    Unknown
    Laser-induced fluorescence of green plants. I - A technique for the remote detection of plant stress and species differentiation (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The laser-induced fluorescence (LIF) of green plants was evaluated as a means of remotely detecting plant stress and determining plant type. Corn and soybeans were used as representatives of monocots and dicots, respectively, in these studies. The fluorescence spectra of several plant pigments was excited with a nitrogen laser emitting at 337 nm. Intact leaves from corn and soybeans also fluoresced using the nitrogen laser. The two plant species exhibited fluorescence spectra which had three maxima in common at 440, 690, and 740 nm. However, the relative intensities of these maxima were distinctly different for the two species. Soybeans had an additional slight maxima at 525 nm. Potassium deficiency in corn caused an increase in fluorescence at 690 and 740 nm. Simulated water stress in soybeans resulted in increased fluorescence at 440, 525, 690, and 740 nm. The inhibition of photosynthesis in soybeans by 3-(3-4-dichlorophenyl)-1-1-dimethyl urea (DCMU) gave incresed fluorescence primarily at 690 and 740 nm. Chlorosis as occurring in senescent soybean leaves caused a decrease in fluorescence at 690 and 740 nm. These studies indicate that LIF measurements of plants offer the potential for remotely detecting certain types of stress condition and also for differentiating plant species.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics (ISSN 0003-6935); 23; 134-142
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 72
    facet.materialart.
    Unknown
    A balloon-borne microwave limb sounder for stratospheric measurements (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: The balloon-borne microwave limb sounder (BMLS) measures atmospheric thermal emission from millimeter wavelength spectral lines to determine vertical profiles of stratospheric species. The instrument flown to date operates at 205 GHz to measure ClO, O3, and H2O2. A 63 GHz radiometer will be added to test the technique for determining tangent point pressure from the MLS experiment on the upper atmosphere research satellite (UARS). Many additional species could also be measured by the BMLS. A radiometer at 270 GHz would provide measurements of HO2, NO2, HNO3, N2O, O-16O-18O-16, and HCN. With this addition, the BMLS can test the current theory of O3 photochemical balance in the upper stratosphere.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Journal of Quantitative Spectroscopy and Radiative Transfer (ISSN 0022-4073); 32; 407-433
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 73
    facet.materialart.
    Unknown
    A cryogenic blackbody for millimeter wavelengths (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: The present cryogenic blackbody reference, or 'cold load', for mm-wavelength radiation has an emissivity of more than 0.99 over a two-octave wavelength range and can be used as a calibrating standard for sensitive IR photometers. The transmittance spectrum obtained indicates that wave impedance and index do not vary significantly over the 80-360 GHz range.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: International Journal of Infrared and Millimeter Waves (ISSN 0195-9271); 5; 1507-151
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 74
    facet.materialart.
    Unknown
    Comparative measurements using different particle size instruments (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: This paper discusses the measurement and comparison of particle size and velocity measurements in sprays. The general nature of sprays and the development of standard, consistent research sprays are described. The instruments considered in this paper are: pulsed laser photography, holography, television, and cinematography; laser anemometry and interferometry using visibility, peak amplitude, and intensity ratioing; and laser diffraction. Calibration is by graticule, reticle, powders with known size distributions in liquid cells, monosize sprays, and, eventually, standard sprays. Statistical analyses including spatial and temporal long-time averaging as well as high-frequency response time histories with conditional sampling are examined. Previous attempts at comparing instruments, the making of simultaneous or consecutive measurements with similar types and different types of imaging, interferometric, and diffraction instruments are reviewed. A program of calibration and experiments for comparing and assessing different instruments is presented.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 75
    facet.materialart.
    Unknown
    Shot noise limited detection of OH using the technique of laser-induced fluorescence (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: Nearly shot-noise limited detection of OH using the technique of laser-induced fluorescence is reported. A LIDAR configuration is used to excite fluoresence in a large volume and a narrow-bandwidth interference filter provides spectral discrimination. This arrangement alleviates the effect of ozone interference and facilitates image processing at relatively close distances. The detection limit is determined mainly by the short-noise of the solar background. Ground-based measurements in Dearborn indicate a detection limit of better than 1 x 10 to the 6th power OH/cubic cm over a forty-minute acquisition period. Under favorable conditions, a comparable detection limit was also observed for airborne measurements.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics (ISSN 0003-6935); 23; 4076-408
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 76
    facet.materialart.
    Unknown
    Response characteristics of laser diffraction particle size analyzers - Optical sample volume extent and lens effects (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: The response characteristics of laser diffraction particle sizing instruments were studied theoretically and experimentally. In particular, the extent of optical sample volume and the effects of receiving lens properties were investigated in detail. The experimental work was performed with a particle size analyzer using a calibration reticle containing a two-dimensional array of opaque circular disks on a glass substrate. The calibration slide simulated the forward-scattering characteristics of a Rosin-Rammler droplet size distribution. The reticle was analyzed with collection lenses of 63 mm, 100 mm, and 300 mm focal lengths using scattering inversion software that determined best-fit Rosin-Rammler size distribution parameters. The data differed from the predicted response for the reticle by about 10 percent. A set of calibration factor for the detector elements was determined that corrected for the nonideal response of the instrument. The response of the instrument was also measured as a function of reticle position, and the results confirmed a theoretical optical sample volume model presented here.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Optical Engineering (ISSN 0091-3286); 23; 610-619
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 77
    facet.materialart.
    Unknown
    Analysis and synthesis of a fluid sonic pulse system (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A nonlinear sonic system is described that includes a delay line. Short-lived pulses with a high repetition frequency circulate through the system. The analysis was carried out by defining the reflection factor at the load and then dividing the input pulse according to duration into sections of appropriate width. The response was determined for each section, the response to the whole pulse being given by the sum of the responses at the sections. This makes it possible to broach the synthesis of a sonic system that will give an output pulse of the desired form.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: The 4th Natl. Conf. on Acoustics, Vol. 2, B (NASA-TT-F-15663); p 177-182
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 78
    facet.materialart.
    Unknown
    Investigations of electret as a contamination control device (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Thermoelectrets of polymers with stable surface charge on either side have been found to attract ions and charged particles to their surfaces. To assess their applicability to the control of atmospheric contamination, polytetraethylene (teflon) electrets are exposed to vapors coming from volatile mixtures over periods up to 90 min. Use is made of mass spectrometry for the analysis of teflon electret characteristics. It is found that even small quantities of the liquids in the mixture gives its characteristic mass spectra and that the peak height represents a measure for the quantity of the material collected over the electret surface, with the collected quantity being proportional to the duration of exposure.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Environmental Letters; 7; 3, 19; 1974
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 79
    facet.materialart.
    Unknown
    The Apollo gamma-ray spectrometer (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A gamma-ray spectrometer has been flown on the Apollo 15 and 16 spacecraft to determine the lunar-surface composition and measure the cosmic gamma-ray flux. The instrument included a NaI(Tl) scintillation crystal coupled to a 7.6-cm photomultiplier tube, a plastic mantle for anti-coincidence rejection of charged particles, and 511 channels of analysis. Boom-mounted operation permitted a significant reduction in the background. The data were transmitted on an event-by-event basis. About 22% of the lunar surface was mapped and spectra of the cosmic gamma-ray flux over an energy range of 0.065-27.5 MeV have been obtained.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Nuclear Instruments and Methods; 118; 1974
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 80
    facet.materialart.
    Unknown
    Spark chamber track finding program (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A spark-chamber track-finding program has been written. The accuracy of the location of the track is good, and if the chamber contains many spurious sparks the computation time is much less than the time used by a least-squares fit routine. Multiple tracks can be found and interaction vertices can thereby be determined.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 81
    facet.materialart.
    Unknown
    Gas-tight flask for the concurrent measurement of gas metabolism and growth in methane-oxidizing bacteria (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Microbiology; 28; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 82
    facet.materialart.
    Unknown
    The problem of selecting an optimum frequency for a measuring generator in determining the value of the hydrophysical parameter with a given accuracy (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The selection of the optimum frequency for a measuring generator for determining the value of the hydrophysical parameter with a given degree of accuracy is discussed. Methods from information theory for measuring generators are described. Conversion of the frequency of generators into digital form by means of statistical averaging is also described.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Automation of the Collection and Analysis of Sci. Inform. in the Probl. of the Interaction of the Atmosphere and Ocean (NASA-TT-F-801); p 80-84
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 83
    facet.materialart.
    Unknown
    Reduction of image blurring on individual aerial photographs (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A technique is discussed for photographic reduction of blurring which utilizes only a single photograph. No special equipment which is not available in practically any photographic laboratory is required to carry out the technique.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Space Iconics (NASA-TT-F-798); p 67-74
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 84
    facet.materialart.
    Unknown
    Film processing in scientific spacecraft television systems (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Photography and photochemical processing of the film in spacecraft phototelevision systems involve several aspects which require an approach to selection of the handling process which differs from that used under ground conditions, different processing technology, and different construction of the instrument for carrying out the processing. Soviet processing techniques and equipment are described.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Space Iconics (NASA-TT-F-798); p 59-66
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 85
    facet.materialart.
    Unknown
    Multiple-slit shadow device for sensing the direction to a shining object (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A multi-slit shadow direction sensor of jalousie type (JDS) was developed to provide a simple, highly reliable tracking system to guide a rotating mirror toward the sun so that the reflected light would illuminate the input slit of a photoelectric spectrometer. The operating principle and stability are considered as well as determination of initial signal level at the output of each photosensor. A procedure is recommended for calculation of a JDS. Both one- and two-coordinate sun direction sensors are described and considered for use in the tracking system of a photoelectric spectrometer.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Equipment for Space Res. (NASA-TT-F-785); p 65-87
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 86
    facet.materialart.
    Unknown
    Development of the design of a between-the-lens band type photographic shutter (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: When photographic equipment is miniaturized, in order to conserve weight and size for spacecraft use, by using wide angle, short focus lenses, a band-type central between-the-lens shutter must be used. The rectangular slot shape was the form with the highest optical efficiency. To overcome the problem of burrs caused in the punching out of the slots in a carbon steel band, a shape limited by arcs with radius equal to half the slot width is preferred.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Equipment for Space Res. (NASA-TT-F-785); p 42-47
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 87
    facet.materialart.
    Unknown
    Geoscience instrumentation (1974)
    In:  Other Sources
    Details
    Publication Date: 2016-03-07
    Description: Geoscience instrumentation systems are considered along with questions of geoscience environment, signal processing, data processing, and design problems. Instrument platforms are examined, taking into account ground platforms, airborne platforms, ocean platforms, and space platforms. In situ and laboratory sensors described include acoustic wave sensors, age sensors, atmospheric constituent sensors, biological sensors, cloud particle sensors, electric field sensors, electromagnetic field sensors, precision geodetic sensors, gravity sensors, ground constituent sensors, horizon sensors, humidity sensors, ion and electron sensors, magnetic field sensors, tide sensors, and wind sensors. Remote sensors are discussed, giving attention to sensing techniques, acoustic echo-sounders, gamma ray sensors, optical sensors, radar sensors, and microwave radiometric sensors.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 88
    facet.materialart.
    Unknown
    Systematic study of aplanatic two-mirror telescopes. II - The Gregorian configuration (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 13; Oct. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 89
    facet.materialart.
    Unknown
    Fluxgate magnetometers for outer planets exploration (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The exploration of the interplanetary medium and the magnetospheres of the outer planets requires the implementation of magnetic field measuring instrumentation with wide dynamic range, high stability, and reliability. The fluxgate magnetometers developed for the Pioneer 11 and Mariner-Jupiter-Saturn missions are presented. These instruments cover the range of .01 nT to 2 million nT with optimum performance characteristics and low power consumption.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 90
    facet.materialart.
    Unknown
    The S-193 radar altimeter experiment (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The Skylab S-193 altimeter experiment utilizes a 10- and 100-ns pulse length, 13.9-GHz earth-pointed radar system to obtain earth-surface backscatter measurements from the Skylab spacecraft. Objectives of the experiment are to obtain precision measurements of surface profile for uses in geodesy, oceanography, and earth physics, and to measure radar-signal characteristics from an earth-orbit geometry to provide design information for future radar remote-sensors. The technical approach is that of measuring the power impulse response of the scattering surface. The hardware is designed to operate in five modes: waveform or impulse-response measurement and altitude determination; radar cross-section experiment; signal correlation experiment; 10-nsec pulse-compression evaluation; and nadir-seeker experiment.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: IEEE; vol. 62
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 91
    facet.materialart.
    Unknown
    Holography and the control of self-propelled vehicles (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The possibility of applying the principles of holography and optical data processing in the control of self-propelled space vehicles is considered. Various methods of controlling space vehicles are described: (1) by the results of comparing the image with the standard hologram; (2) by holographic images transmitted over moon earth communications channels; and (3) on the basis of using autotelevision cameras with a three dimensional screen. Procedures are presented for obtaining the standard holograms. The structural organization of the microprogrammed automaton controlling the movement of the space vehicle is also presented.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Technol. for the Production of Space Equipment (NASA-TT-F-15766); p 111-142
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 92
    facet.materialart.
    Unknown
    Electronic power generators for ultrasonic frequencies (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The design and construction of an ultrasonic frequency electronic power generator are discussed. The principle design elements of the generator are illustrated. The generator provides an inductive load with an output power of two kilowatts and a variable output frequency in the fifteen to thirty KiloHertz range. The method of conducting the tests and the results obtained with selected materials are analyzed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: The 4th Natl. Conf. on Acoustics Vol. 2, B (NASA-TT-F-15663); p 33-39
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 93
    facet.materialart.
    Unknown
    Portable apparatus with CRT display for nondestructive testing of concrete by the ultrasonic pulse method (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The development of methods for the nondestructive study of concrete structures is discussed. The nondestructive test procedure is based on the method of ultrasonic pulse transmission through the material. The measurements indicate that the elastic properties of concrete or other heterogeneous materials are a function of the rate of ultrasonic propagation. Diagrams of the test equipment are provided. Mathematical models are included to support the theoretical aspects.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: The 4th Natl. Conf. on Acoustics, Vol. 2, B (NASA-TT-F-15663); p 27-32
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 94
    facet.materialart.
    Unknown
    Method of vibration analysis using holographic interferometry and heterodyne optical detection (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A method of studying thin plate vibrations with the aid of a laser beam is discussed. Through a suitable combination of time-average holographic interferometry, real-time holographic interferometry, and heterodyne optical detection, it is possible to obtain complete information on the vibration parameters of modes, amplitudes, frequencies, and phases. The method has the advantage of three dimensional global observation, noncontact, and high precision measurements.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: The 4th Natl. Conf. on Acoustics Vol. 2, B (NASA-TT-F-15663); p 7-14
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 95
    facet.materialart.
    Unknown
    On the ultrasonic holography (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The development of a system of ultrasonic holography is discussed. The limitations of the acousto-optical transformers, the scanning method, and the Pohlman cell are analyzed. The application of the free liquid surface deformation method is emphasized. The test equipment required for the liquid surface deformation method is described. An illustration of a typical test installation is provided.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: The 4th Natl. Conf. on Acoustics, Vol. 2, B (NASA-TT-F-15663); p 1-6
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 96
    facet.materialart.
    Unknown
    Holography with standing surface plasma waves (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Holography with standing surface plasma waves, where both reference and object beams propagate in opposite directions, has been investigated using an Al reflection grating coated with evaporated As2S3 layers. The image, which appears only for p-polarization and at certain critical angles, is enhanced by the Lippman-Bragg effect and by an increase in intensity over ordinary holography approximately equal to the absolute value of the real part of the dielectric constant for Al. Also considered is holography with object light alone in photoresist layers, using the beam-splitting properties of the grating.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Optics Communications; 12; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 97
    facet.materialart.
    Unknown
    Porous leak evaluation and application to calibration of a high-pressure ion gauge (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Journal of Vacuum Science and Technology; 11; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 98
    facet.materialart.
    Unknown
    Dustsonde and lidar measurements of stratospheric aerosols - A comparison (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Comparison of lidar and in situ measurements of stratospheric aerosol profiles obtained by backscattered ruby laser light and by direct in situ sampling over Laramie, Wyoming, on two nights in mid-September 1972. The lidar backscattering and the particle number density profiles correlated well. Based on these initial comparative experiments, the ground-based lidar coupled with temperature soundings appears to be a possible method for determining the relative aerosol profile under given stratospheric loading conditions.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 13; Oct. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 99
    facet.materialart.
    Unknown
    Fabrication of an extreme ultraviolet glancing incidence telescope (1974)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A technique is described for use in the fabrication of glancing incidence telescopes which operate at large grazing angles (i.e., 8 to 15 degrees). Precision conic section plunge laps are used in a controlled grinding procedure to initially generate imaging surfaces which have a minimum of subsurface damage. A numerically controlled Moore Number 3 Measuring Machine is used throughout the fabrication procedure. Surface geometry accuracies on the order of one-tenth micron have been achieved.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Optical Engineering; 13; Mar
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 100
    facet.materialart.
    Unknown
    Analysis and application of Fourier transform spectroscopy in atmospheric remote sensing (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: An analysis method for Fourier transform spectroscopy is summarized with applications to various types of distortion in atmospheric absorption spectra. This analysis method includes the fast Fourier transform method for simulating the interferometric spectrum and the nonlinear least-squares method for retrieving the information from a measured spectrum. It is shown that spectral distortions can be simulated quite well and that the correct information can be retrieved from a distorted spectrum by this analysis technique.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics (ISSN 0003-6935); 23; 2604-261
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...