ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

Ihre E-Mail wurde erfolgreich gesendet. Bitte prüfen Sie Ihren Maileingang.

Leider ist ein Fehler beim E-Mail-Versand aufgetreten. Bitte versuchen Sie es erneut.

Vorgang fortführen?

Exportieren
Filter
  • Analytical Chemistry and Spectroscopy  (4.464)
  • Chemical Engineering  (2.451)
  • Engineering  (1.797)
  • Animals  (1.694)
  • 1990-1994  (6.110)
  • 1980-1984  (4.296)
  • 1965-1969
  • 1925-1929
  • 1991  (3.107)
  • 1990  (3.003)
  • 1984  (2.224)
  • 1983  (2.072)
  • 1929
Sammlung
Schlagwörter
Erscheinungszeitraum
  • 1990-1994  (6.110)
  • 1980-1984  (4.296)
  • 1965-1969
  • 1925-1929
Jahr
  • 1
    Digitale Medien
    Digitale Medien
    Springer
    Environmental management 8 (1984), S. 309-324 
    ISSN: 1432-1009
    Schlagwort(e): Animals ; Indicators ; Air pollution ; Ecosystem responses
    Quelle: Springer Online Journal Archives 1860-2000
    Thema: Energietechnik
    Notizen: Abstract With existing and proposed air-quality regulations, ecological disasters resulting from air emissions such as those observed at Copperhill, Tennessee, and Sudbury, Ontario, are unlikely. Current air-quality standards, however, may not protect ecosystems from subacute and chronic exposure to air emissions. The encouragement of the use of coal for energy production and the development of the fossil-fuel industries, including oil shales, tar sands, and coal liquification, point to an increase and spread of fossil-fuel emissions and the potential to influence a number of natural ecosystems. This paper reviews the reported responses of ecosystems to air-borne pollutants and discusses the use of animals as indicators of ecosystem responses to these pollutants. Animal species and populations can act as important indicators of biotic and abiotic responses of aquatic and terrestrial ecosystems. These responses can indicate long-term trends in ecosystem health and productivity, chemical cycling, genetics, and regulation. For short-term trends, fish and wildlife also serve as monitors of changes in community structure, signaling food-web contamination, as well as providing a measure of ecosystem vitality. Information is presented to show not only the importance of animals as indicators of ecosystem responses to air-quality degradation, but also their value as air-pollution indices, that is, as air-quality-related values (AQRV), required in current air-pollution regulation.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 2
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 22-29 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Polymer blends of nylon 66 and thermotropic polyester with long flexible spacers in the main chains were prepared by melt mixing. The samples were made as single filaments by passing the polymer blend through a small and round die of a capillary rheometer. Mechanical properties of blends showed that the modulus and strength of nylon 66 could be improved without reduction of extensibility. The morphology of fractured surfaces was observed by a scanning electron microscope (SEM). It showed that the microfibrillar structure of a thermotropic polyester was formed by extensional flow while the spherical and ellipsoidal particles in the nylon 66 (matrix polymer) were produced by shear flow. The polyester particles were occasionally covered with adhering matrix polymer because of good adhesion between these two polymers. They were highly elongated by tensile stress without loss of elongational characteristics of blends. This fact was explained by very good adhesion between the two phases.
    Zusätzliches Material: 8 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 3
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 83-89 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The physical behavior of the diglycidyl ether of bisphenol A, cured with different concentrations of 2-ethyl-4-methylimidazole, was examined with dynamic mechanical and dielectric analyses, differential scanning calorimetry, and solvent extraction studies, ‘The network formation process was shown to depend strongly on the imidazole concentration’. At high imidazole concentrations, the gel point was characterized by a decrease in sol fraction, the crossover of the dynamic moduli and a rapid increase in viscosity. At low imidazole concentrations, the viscosity remained low until the sol fraction approached zero. For this system, the gel point, which occurred prior to the dynamic moduli crossover, was characterized by comparing the thermal properties of the network with the viscosity and dielectric behavior of the resin system during cure.
    Zusätzliches Material: 12 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 4
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 108-117 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: We examine several practically important problems, related to the mechanical behavior of dual coated optical fibers: low temperature microbending, evaluation of spring constant due to coating layers, strength of the end portions of fibers clamped in terminal fixtures, and prediction of stresses caused by the misalignment of the openings in the frame and in the terminal fixture. The developed formulas are simple, easy-to-use, and clearly indicate the role of the major factors affecting the mechanical behavior of the fibers. The obtained results can be of help in physical design of dual coated fibers and optical interconnections.
    Zusätzliches Material: 7 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 5
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 129-133 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The “Efficiency of Energy Absorption” (or “Efficiency”) and “Ideality” parameters were evaluated for several plastic foams and were found to be very useful in choosing an appropriate cushion for the protection of a specific product. The maxima in these parameters were found to be in the same range of stresses, when derived from dynamic measurements or from predicted stress-strain curves based on previously proposed “Reference” and “Modified Boltzman Superposition” Models. For the rate independent foams the maxima in these parameters do not change with strain rate and can therefore be derived from slow, constant rate (“static”) experiments. For rate dependent foams however, the maxima from “static” measurements were found to be in a lower range of stresses than those derived from dynamic ones. As a result, slow rate compressive measurements do not predict well the behavior of the foams during impact and the use of the “Reference” and “Modified Boltzman Superposition” Models is required for good predictions. It was found that the suffer PS and PE foams attain maximum Efficiency and Ideality at higher stresses than the more flexible PUR foams.
    Zusätzliches Material: 11 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 6
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 31 (1991), S. 110-115 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: A new crystallization kinetic equation has been derived considering the decrease in growth rate. The average linear growth rate of spherulite was assumed to be proportional to the m-th order of the uncrystallized fraction of the crystallizing material. A modified Avrami equation, 1 - Vc = exp[-Kf(t)n], was used where f(t) is the integral of the growth function, (1 - Vc)m. The validity of the equation was tested by analyzing the isothermal crystallization kinetic data of poly(ethylene terephthalate) from the melt using differential scanning calorimetry.
    Zusätzliches Material: 8 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 7
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 31 (1991), S. 99-103 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Process changes aimed at improving printer engine performance must take into consideration not only the process variables (such as nip temperature and pressure and process time to), but also the melt rheological variables (such as the characteristic time scale of the toner Tc). The melt rheology relevant to the electrophotographic toner fusing process is discussed. One criterion for toner quality can be conveniently measured through the Deborah number De, which is the ratio of Tc to to. Modification of the melt rheology by matrix polymer composition and carbon black size and concentration has previously been explored. Here, the melt rheology of toners with a range of gel content was studied using a step shear test. The coupled relaxation model was employed to fit the stress relaxation data. The viscoelastic properties were calculated from the melt data with this model. These properties were then used to estimate the strain deformation of the toner as it passes through the nip with arbitrary residence time and nip pressure as a function of gel content. This method can be used to match the toner melt properties with the processing conditions.
    Zusätzliches Material: 3 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 8
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 31 (1991) 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 9
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 31 (1991), S. 125-139 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The unified numerical simulation of the filling/postfilling stages of the injection-molding process described in Part I is compared in the present paper with experimental results obtained with instrumented test molds. Flush-mounted pressure traces in the delivery system as well as in the cavity are favorably compared with corresponding predictions for both an amorphous and a semicrystalline polymer. It is demonstrated that the present unified formulation is well suited to handle complicated molds where compressibility effects can become important even during the filling stage, as portions of the cavity fill and undergo a packing behavior even when other regions of the cavity are still only partially filled.
    Zusätzliches Material: 19 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 10
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 31 (1991), S. 116-124 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: This study employs a unified theoretical model to simulate the filling and postfilling stages of the injection-molding process. Implementation of such a model is based on a hybrid finite-element/finite-difference numerical solution of the generalized Hele-Shaw flow of a compressible viscous fluid under nonisothermal conditions. The shear viscosity of the polymeric material is represented by a Cross model for the shear-rate dependence and a WLF-type functional form for the temperature and pressure dependence, whereas the specific volume is modeled in terms of a double-domain Tait equation. The analysis also handles variable specific heat and thermal conductivity of the polymer as a function of temperature. Complex thin parts of variable thickness can be modeled and discretized by flat, triangular finite elements which may have arbitrary orientation in three-dimensional space, whereas runners and possible round pins or bosses in the part are represented as one-dimensional circular-tube elements. A control-volume scheme is employed that leads to automatic melt-front advancement during the cavity-filling stage.
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 11
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 31 (1991), S. 140-144 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The characteristic sigmoid compressive stress-strain relationships of sponges and their layered arrays are described by two kinds of mathematical models having three experimentally determined parameters. Since sponge compression is not accompanied by a significant cross-sectional area expansion, it was assumed that the stress in a multilayered array is the same in each layer. This enables prediction of the array's stress-strain relationship from the parameters of the individual layers and their known thickness. The applicability of the method is demonstrated with experimental data of two kinds of double-layered arrays of polyurethane sponges. It is shown that the arrays' compressive behavior can be satisfactorily predicted irrespective of the mathematical form of the model and whether the strain is expressed as engineering strain or Hencky's.
    Zusätzliches Material: 8 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 12
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 31 (1991), S. 145-152 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The gapwise density distributions of the injection molded specimens of two engineering thermoplastics, i.e., poly(phenylene ether) and poly(ether imide), were characterized employing the density gradient column technique. The samples were molded using a 40t Van Dorn injection molding machine. The effects of the thermal history on the density distribution of unconstrained quenched specimens were also investigated. In addition, various material properties, such as pressure-volume-temperature, isothermal contraction, and pressure induced densification behavior were characterized, for the two resins employed in this study. The moldings of the two resins exhibited different trends in their density distributions. These findings were explained in terms of the competing effects of cooling rate and the pressure history experienced by the engineering plastic resins during the molding cycle. The data collected were also used as input to mathematical modeling of density distributions in injection molded articles, which is reported in Part II of this article.
    Zusätzliches Material: 14 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 13
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 31 (1991), S. 191-196 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The problem of steady solidification of a power law fluid flowing in a round tube was solved numerically. The fluid considered was a polymer with temperature dependent viscosity. The mathematical solution was obtained by using an implicit finite difference method. Results are presented to show the effects of the Peclet number, Nahme number, and the power law index on the profiles of the frozen layer. Melt temperature profiles at different axial locations are also presented.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 14
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 31 (1991) 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 15
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 31 (1991), S. 197-203 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Extensional flow of a bicomponent two-layer slot cast coextrusion process has been studied. A Newtonian and an upper-convected Maxwell fluid were considered to be the two layers, respectively, and the two-layer flow was assumed to be steady and isothermal. This choice was made as a simple model for a system which consists of two distinctly different fluids in terms of their extensional behaviors. Present study considered only the draw-down region where the film thickness changes slowly with the distance from the die exit. For this region, asymptotic solutions could be obtained for two limiting cases in which the elasticity effect of the Maxwell fluid layer is small and the applied tension at the take-off is large, respectively. When the elasticity effect is small, the melt thickness and the velocity profiles are exponential as in the case of a Newtonian single-layer flow. When the applied tension is large, on the other hand, the velocity profile is shown to be near linear. Furthermore, the viscoelasticity effect of the Maxwell fluid layer becomes so dominant that it dictates the mechanics of the coextrusion flow even when its flow rate and shear viscosity may be much smaller than those of the Newtonian layer.
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 16
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 96-107 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Sudden changes of compressive strain-rate on glassy poly(methyl methacrylate) lead to the conclusion that the post-yield state under a constant stress is a state of steady flow in the polymer. Non-linearity between the stress divided by temperature and the logarithm of strain rate for this steady plastic flow can successfully be analyzed using the Eyring equation with structural factors variable depending on stress and temperature. This analysis gives a unique functional relationship between the activation entropy and the activation enthalpy, which agrees fairly well with that for the melt derived from the WLF equation. This agreement provides a direct evidence verifying structural change of the glass into liquid-like structure and enables us to recognize the conformational arrangement as an essential structural parameter controlling molecular mobility. Another experimental relation between the Eyring factors - the activation volume and the activation enthalpy - permits us to estimate the magnitude of an elementary volume for the molecular movement in the melt as a function of temperature. Moreover, the experimental finding of the steady flow in the glassy polymer motivated us to propose a transition mechanism from elastic deformation to plastic flow in which the internal viscosity or the activation volume is introduced as a single parameter representing the transient state of the structure.
    Zusätzliches Material: 16 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 17
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 118-123 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: An apparatus was designed and assembled to study the solvent removal from solution-cast thin polymer films. The computer interfacing of a thermogravimetric analyzer, spectrophotometer, electronic flowmeters, and control valves for the apparatus enabled the preprogramming of the carrier gas velocity, carrier gas solvent content, and temperature profiles to simulate the environment experienced in large parallel flow industrial driers. The apparatus has also been designed and operated to enable the visual observation of the drying film with an optical microscope. Initial experimental studies conducted with the apparatus involved the effect of temperature on solvent removal. The results indicate that high dryer gas temperatures can apparently cause skinning of the film surface resulting in slower solvent removal rates. The skin formation can be suppressed by higher solvent concentration in the carrier gas. The visual observations revealed the formation of standing waves in the film surface during drying at high gas velocities (〉2OO cm/min). The wave formation at least partially overcomes the effect of skinning by increasing the surface area of the film, and may be the manifestation of flow instabilities involving circulation within the film.
    Zusätzliches Material: 9 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 18
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 147-152 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Ultrasonically induced bubble formation for the production of thermoplastic foam was investigated experimentally and theoretically as a basic study. A general purpose polystyrene and blends of low density polyethylene and polyethylene wax were saturated with nitrogen gas under various pressures and the ultrasonic excitation was applied to the polymer system upon release of gas pressure. The ultrasonic nucleation of bubbles in the polymer matrix was modeled by utilizing the classical nucleation theory. The negative pressure generated by the ultrasonic excitation was considered as the environmental pressure at the moment of nucleation. The experimental results showed that the heterogeneous nucleation must be used for ultrasonic foaming of the viscous fluid and the homogeneous nucleation for the low viscosity fluid. The theoretical analysis also indicated that the ultrasonic nucleation can be applied to the production of thermoplastic foam if the ultrasonic excitation generates large enough negative pressure.
    Zusätzliches Material: 10 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 19
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 31 (1991) 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 20
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 7-12 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Extrusion measurements have been carried out on blends of nylon 6 and a liquid-crystalline copolyesteramide (LCP). The flow curves at low temperature show a behavior similar to that of pure LCP with a rapid rise of the viscosity at low shear rates. At high shear rates the viscosity is lower than that for each of the two components. This minimum has been attributed to the lack of interactions between the two phases and to the formation of fibrils of the LCP phase. The SEM analysis shows, indeed, that fibrils of the LCP phase are produced in the convergent flow at the inlet of the capillary at high shear rates. These fibrils are lost during the flow in the long capillary.
    Zusätzliches Material: 12 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 21
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 31 (1991), S. 353-364 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Optimal open loop control strategies are developed for a semibatch free radical copolymerization of methyl methacrylate and vinyl acetate using the multiobjective dynamic optimization method. A detailed kinetic model is validated through experimentation and used for the design of optimal controls. Both monomer feed rate and reactor temperature are varied to produce the copolymer of desired composition and molecular weight. The open loop control policies are implemented in a process control computer and tested on an experimental stirred tank polymerization system. Excellent agreement between the model predictions and the experimental data have been obtained.
    Zusätzliches Material: 9 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 22
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 31 (1991), S. 333-352 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The dynamic behavior of two continuous stirred tank reactors in series has been investigated for free radical solution polymerization of styrene with a binary mixture of two initiators having different thermal decomposition activities. For a wide range of initiator feed composition, both reactors exhibit quite complex nonlinear steady state and transient behavior. When the reactor residence time is used as a bifurcation parameter, the second reactor can have up to five steady states. For certain range of reactor operating conditions, bifurcations to various types of periodic solutions have been observed, such as Hopf bifurcation, isolas, period doubling, period-doubling cascade, and homoclinics. The effects of other reactor variables, such as total initiator concentration, coolant temperature, and reactor volume ratio on the reactor dynamics, are illustrated to show the complex dynamic behavior of the two-reactor system catalyzed by a mixture of t-butyl perbenzoate and benzoyl peroxide.
    Zusätzliches Material: 15 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 23
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 31 (1991), S. 365-375 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: This paper presents the development of a novel in-line extrusion rheometer based on the flow of polymer through a wedge (vertically tapered slit). This rheometer is suitable for measuring changes in rheological properties on-line during reactive extrusion, because it can be used to estimate the viscosity for a range of shear rates without the need to change the polymer flow rate (i.e., extruder throughput). Equations have been developed to estimate the parameters of the power-law equation, used to describe the viscosity-shear rate relationship, from measurements of pressure drops along the wedge. An experimental in-line wedge rheometer has been built and used to measure the viscosity for a series of polypropylenes prepared via reactive extrusion. Viscosity measurements from the experimental in-line wedge rheometer are compared with measurements from a capillary rheometer. Good agreement is found between the capillary and wedge rheometer measurements.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 24
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 31 (1991), S. 391-391 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 25
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 124-128 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Rheological studies of an experimental liquid crystalline (LC) copolyester were carried out using a capillary rheometer and a cone and plate rheometer. Rheological characteristics of the polymer in the nematic state were observed. The nematic melt was found to be pseudoplastic and the degree of pseudoplasticity varied with shear rate. Melt viscosity was found to decrease with shear rate. Negative die swelling was observed at the exit of the capillary rheometer at temperatures marginally above the solid-nematic transition temperature of the polymer and was also found to be a function of shear rate. The dynamic mechanical properties of the polymer were studied as a function of temperature. The activation energies of flow and of dynamic mechanical deformation were calculated.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 26
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 137-141 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Ion beam mixing was used to improve the adhesion between deposited Cu film (400 Å) and polyimide (PI) substrate. Ar+ ion with the energy levels between 180 and 200 keV, and the dose between 1014 to 4 × 1016 ions/cm2 were used. The surface analyses were carried out by Rutherford Backscattering Spectroscopy (SEM). RBS analysis, using 2 MeV He+ ions, showed mixing of Cu and FI and the mixing depended on the Ar+ energy and dose. The X-ray study showed a very broad halo for deposited Cu film but the (111) peak appeared after the Ar+ implantation and the peak increased with Ar+ ion dose. Optical micrographs showed that Cu film formed circular bubbles after many thermal cycles when adhesion was poor and fracture cracks when adhesion was good.
    Zusätzliches Material: 7 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 27
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 153-161 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The general domain in which this work resides is that of mixing in creeping flows. Mixing, in this context, refers to the stretch of an interfacial line, or area in a strain field. The advancement of mixing technology is applied to the design of continuous mixers used in polymer processing. The geometric designs included single screw extruders, static motionless mixers, and co- and counter-rotating twin screw extruders. The co-rotating twin screw extruder was chosen to be studied in detail since it enjoys wide applications and, for which, little understanding of the contribution to mixing in the different screw geometries is known. In order to evaluate the rate of mixing for the non-uniform strain history flows, the method for measuring mixing had to be reexamined and broadened. An automated method has been developed which incorporates a digital camera and a computer to analyze the cross-sections of interest. Two measures of mixing - the correlation function and the distribution function - are developed to describe mixing in these regimes. These measures are applied successfully to the mixer geometries revealing subtle differences as to the nature of mixing in each.
    Zusätzliches Material: 14 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 28
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 175-186 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: This paper describes the shear imposed interfacial segregation of release systems for the facilitated attenuation of polyurethane (PU) adhesion to metal coun-terfaces using a RI-RIM system. It is shown that the migration rate of the dispersed release additives due to a shear imposed stress in the resin fluid is much greater than that arising from Fickian diffusion, thereby removing a vital constraint from conventional practice. The novel rotary injection RIM system is presented to simulate the on-line injection and shear induced interfacial segregation in model PU/abherent systems. A wide range of recipes comprising single (liquids or solids) and multicomponent (liquid-liquid and solid-liquid) release materials were injected into the polymerizing resin mixture to provide cohesively weak and friable “particle” boundary layer assemblies at the PU/metal interface. An instrumented Blister Test was employed to evaluate the quality of the molded interfaces in terms of adhesion and the concentration distribution of the injected species in the final cured moldings was determined through high pressure liquid chromatography (HPLC). A comparison of the results on the shear modified and the compounded interfaces confirm an accentuated lateral migration of the additives to the interface resulting in an appreciable diminution in the adhesion of the system. Finally, transport models are suggested to account for the observed augmented transport.
    Zusätzliches Material: 12 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 29
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990) 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 30
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 197-201 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: It is the purpose of the present publication to show that most of the phenomenological viscoelastic theories developed for bulk polymers can be readily adapted to plastic foams in order to evaluate their mechanical properties. In addition it will be demonstrated how the mechanical properties of open cell plastic foams can be predicted from a few simple compression and relaxation experiments.
    Zusätzliches Material: 7 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 31
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 211-218 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: We have extended the essential work of fracture technique to allow for the determination of the plane-strain essential work of fracture. The new technique is to measure the specific work of fracture as a function of ligament length in deeply double edge notched samples. This type of data is then experimentally corrected to remove the plastic work of fracture and leave only the essential work of fracture as a function of ligament length. By extrapolating the essential work of fracture to zero-ligament length, we claim to be measuring the plane-strain essential work of fracture. This new technique was applied to two rubber toughened nylons and to a series of polyethylenes. The plane-strain essential work of fracture was found to be independent of thickness. Where comparison can be made to J-integral testing, the plane-strain essential work of fracture was similar to the critical J-integral, JIc.
    Zusätzliches Material: 9 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 32
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 228-234 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The objective of this work has been to study composite systems in which carbon fibers are dispersed in a liquid crystal polymer matrix. The fundamental point of interest here has been the interfacial response that fiber surfaces can potentially induce in self-ordering polymers. The matrix material used was a thermotropic liquid crystal polyester synthesized in our laboratory from the monomers p-acetoxybenzoic acid, diacetoxyhydroquinone, and pimelic acid. The aromatic-aliphatic polymer was characterized by NMR as a chemically disordered polymer of the three structural units which exhibits a nematic phase at temperatures above 150°C. Breadline proton NMR above the solid to liquid crystal transition was used to measure the rate of magnetic alignment of molecules in the matrix and polarized optical microscopy was used to analyze interfacial zones in composite samples. Fiber surfaces were found to influence the orientation and orientational dynamics of a liquid crystal polymer matrix. This was revealed by enhanced rates of magnetic orientation in the polymer melt when carbon fibers are dispersed in the medium. Fiber surfaces were also found to stabilize nematic ordering of the polymer as the melt was heated towards complete isotropization. The phenomena discovered here may originate in the development of zones around fibers with a common molecular orientation anchored by the carbon surface.
    Zusätzliches Material: 10 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 33
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 241-248 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: A series of impact tests are described in which the plane strain fracture toughness, Kc1, of five different polymers is measured using a three point bend specimen at striker speeds up to 5m/s. At low speeds Kc1 is determined using the maximum load and a static analysis, but at speeds greater than 1 m/s the dynamic effects render the load signal unusable. For the higher speeds the fracture is timed using contact and crack propagation gages and the analysis is performed using the striker displacement at fracture. A dynamic analysis is used to convert this measurement to the true specimen displacement and Kc1 is determined from this. The apparent downward trends in the Kc1 results obtained, especially at speeds above 3m/s, are discussed.
    Zusätzliches Material: 14 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 34
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. i 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 35
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 17-26 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A simple two-step corrective technique is presented in this paper for evaluating stress intensity factors in crack problems. In the first step an approximate evaluation of the stress intensity factor was made by considering the cracked plate to be of infinite size. The stresses of the problem were relaxed by the stresses of the infinite body which corresponds to the approximate value of the stress intensity factor. The expected discrepancy in the value of SIF by the infinite plate approximation was corrected in the second step where the existing residual stresses are equilibrated at the cracked plate by using any of the conventional finite element techniques and the corrective value of the stress intensity factor is calculated by using an appropriate collocation formula. The method was applied to three typical plane problems of cracked plates with satisfactory results.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 36
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 73-91 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: In this study, three boundary element method approaches are compared by solving a typical problem in linear elastodynamics. The first approach formulates and solves the problem in the real time domain in conjunction with a time-stepping algorithm. The other two approaches formulate and solve the problem in the Laplace and the Fourier transformed domains, which necessitates a numerical inversion of the results to the time domain. The results obtained compare favourably with available analytic solutions. A detailed tabulation of the computer time and memory requirements of each approach is presented.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 37
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983) 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 38
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 185-215 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: It is well known that one way to treat nonlinear periodic dynamical systems governed by ordinary differential equations is to find first the corresponding point mappings. This approach has many advantages but it has a main obstacle in that it is difficult to obtain the exact mapping except in very special cases. Presented in this paper is a procedure which allows us to determine the point mapping in a polynomial form up to any specific degree of accuracy. The procedure when applied to linear periodic systems reduces to the one proposed by Friedmann et al.22 After presenting the algorithm for finding the point mappings, the method is applied to several problems in order to study the dynamical properties of the systems and to demonstrate the usefulness of the method.
    Zusätzliches Material: 15 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 39
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 281-291 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: The inclusion principle provides a qualitative characterization of the eigenvalues of a matrix. The principle has been shown to apply to systems described by a single Hermitian matrix, the most important of which being the real symmetric matrix. Self-adjoint distributed systems, when discretized by either the classical Rayleigh-Ritz method or by the finite element method, lead to algebraic eigenvalue problems described in terms of two real symmetric matrices. The algebraic eigenvalues problem derived by the classical Rayleigh-Ritz method possesses the embedding feature required by the inclusion principle, but that derived by the finite element method in general does not. This paper demonstrates that the inclusion principle can be extended to discretized systems derived by the hierarchical finite element method.
    Zusätzliches Material: 1 Tab.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 40
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 310-310 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 41
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 315-329 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: Two kinds of techniques for solving a shape determination problem are proposed. The determination of the interface boundary between two domains governed by Poisson and Laplace equations under the compatible and constraint condition is considered. Influence coefficient and inverse variational approaches are examined by using the iterative finite element procedure. A two-dimensional model of a junction-type field effect transistor is a test example. The determination of its interface boundary and the prediction of the potential distribution and static characteristic are demonstrated.
    Zusätzliches Material: 13 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 42
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 393-404 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A new, improved infinite element based on mapping is proposed for modelling unbounded domain problems. Mapping has previously been used in such problems, not only for the entire domain, but also for the infinite element itself. The novelty of the present approach is the simplicity of the mapping, and the retention of standard integration abscissae and weights. The implementation of these elements is very straightforward, and they are ideally suited for the analysis of infinite domain static problems in two and three dimensions.
    Zusätzliches Material: 9 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 43
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 431-449 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A uniform linear beam in a uniform linear ambient medium is studied. The beam performs stationary harmonic damped nonsynchronous space vibration in simultaneous tension, torsion, bending and shear in the presence of a large static axial load. Hysteretic and viscous dampings of the beam material and ambient medium are considered. Generalized complex Koloušek functions are derived. A 12 × 12 complex symmetric stiffness matrix is established for a supported beam member excited at its ends by prescribed harmonic translations and rotations which have the same frequency but may be out of phase. This matrix allows for an exact analysis of nonproportionally damped built-up beam structures, thus avoiding assumed mode shapes and lumped or consistent masses. A general notation is suggested. Numerical examples are given, including applications of the computer program SFVIBAT-DAMP.
    Zusätzliches Material: 7 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 44
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 468-472 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 45
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 467-468 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Zusätzliches Material: 1 Tab.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 46
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 451-465 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: In this paper we extend predictor-corrector methods, commonly used for the numerical solution of ordinary differential equations (o.d.e.s), to parabolic partial differential equations (p.d.e.s), typically of the form ut = auxx + ƒ(u, ux, x, t).We describe linear multistep methods for p.d.e.s, the nonlinear algebraic equations arising from implicit formulae being solved using a corrector analogous to those used for o.d.e.s. A sufficient condition for convergence of the iteration is then derived and is found, in most cases, to be far less restrictive than that obtained from the usual method of lines approach. Numerical results are presented to investigate the necessity of this condition. They also indicate that we can accelerate convergence by reducing the time increment. This allows us to achieve convergence within a prescribed number of iterations and so to construct PCm methods corresponding to P(EC)m methods for o.d.e.s. Numerical results are also given to test the absolute stability of the Crank-Nicolson corrector for various predictors P, and iterations, m.
    Zusätzliches Material: 10 Tab.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 47
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 626-630 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 48
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 647-664 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A Fortran computer program is described which calculates physical quantities for a class of shell triangular elements undergoing inextensional bending. These elements are in quadratic parametric representation and may have positive, zero or negative Gaussian curvature.The exact inextensional bending solutions for the rectangular displacement components are cubic in the surface co-ordinates and the curvature changes are relatively slowly varying.
    Zusätzliches Material: 5 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 49
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 757-764 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: An algorithm based on a new formulation of problem is used in generating the co-ordinates of the meridian of the drop-shaped tank. The stresses and moments of this form, due to the varying hydrostatic pressure head, are obtained by a finite element simulation and the usefulness of this approach is assessed.
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 50
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983) 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 51
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 803-810 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: Universal serendipity elements (USE) are defined as isoparametric elements having linear, quadratic and cubic node configurations at their edges in an arbitrary manner. Formulation of shape functions and their derivatives for USE is presented. A computer algorithm which allows the efficient application of USE is explained. Only corner nodes are kept transparent to the user. Changing the order of USE is fully automated. It is concluded that the USE concept allows interactive mesh refinement in an efficient manner and eliminates the difficulties encountered in the use of higher order isoparametric serendipity elements.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 52
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 859-871 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: In this paper we consider solution of the eigen problem in structural analysis using a recent version of the Lanczos method and the subspace method. The two methods are applied to examples and we conclude that the Lanczos method has advantages which are too good to overlook.
    Zusätzliches Material: 9 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 53
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 145-151 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: In many commercial finite element method systems, the formulation of constraint equations from rigid elements is based entirely on rigid body mechanics. However, when initial (thermal) strains exist, a more general approach is required for rigidizing the element. This new approach also opens up a more versatile generation scheme of constraint equations for rigid or partially rigid elements.
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 54
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 169-184 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A class of mixed finite element discretizations of the problem of limit analysis for plastic plates is analysed. For the discrete problem we discuss a linear programming approach based on linearization of the yield condition and a convex programming approach based on the exact Mises condition. Applying the method to rectangular plates with uniform load and concentrated loads we get improved and new results partly in disagreement with one of our references.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 55
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 237-255 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A shear-flexible finite element is employed to investigate the transient response of isotropic, orthotropic and layered anisotropic composite plates. Numerical convergence and stability of the element is established using Newmark's direct integration technique. Numerical results for deflections and stresses are presented for rectangular plates under various boundary conditions and loadings. The parametric effects of the time step, finite element mesh, lamination scheme and orthotropy on the transient response are investigated. The present results agree very closely with the results available in the literature for isotropic plates, and the results for composite plates should serve as bench marks for future comparisons by other investigators.
    Zusätzliches Material: 15 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 56
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 305-309 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Zusätzliches Material: 3 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 57
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 311-311 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 58
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 355-371 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: This paper contains numerical considerations on, and the results of the problem of a fluid filtering through a porous, isotropic, homogeneous, three-dimensional dam with variable cross-section. The numerical solution is obtained by the finite element method using cylindrical elements that exactly match the curved part of the boundary.Furthermore, a lower and an upper numerical enclosure of the free boundary are considered, together with a description of the procedure of calculations performed by an IBM 370/158 computer.
    Zusätzliches Material: 5 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 59
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 421-430 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A new technique for the solution of singular integral equations is proposed, where the unknown function may have a particular singular behaviour, different from the one defined by the dominant part of the singular integral equation. In this case the integral equation may be discretized by two different quadratures defined in such a way that the collocation points of the one correspond to the integration points of the other. In this manner the system is reduced to a n × n system of discrete equations and the method preserves, for the same number of equations, the same polynomial accuracy. The main advantage of the method is that it can proceed without using special collocation points. This new technique was tested in a series of typical examples and yielded results which are in good agreement with already existing solutions.
    Zusätzliches Material: 1 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 60
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 479-493 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A uniform linearly elastic beam element with non-coinciding centres of geometry, shear and mass is studied under stationary harmonic end excitation. The Euler-Bernoulli-Saint Venant theory is applied. Thus the effect of warping is not taken into account. The frequency-dependent 12 × 12 element stiffness matrix is established by use of an exact method. The translational and rotational displacement functions are represented as sums (real) of complex exponential terms where the complex exponents are numerically found. Built-up structures containing beam elements of the described type can be analysed with ease and certainty using existing library subroutines.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 61
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 567-580 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: The implementation of a combined boundary element-finite element analysis capability is discussed. A comparison is then made between the finite element, boundary element and coupled method as applied to unbounded problems in elasticity and plasticity.
    Zusätzliches Material: 11 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 62
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983) 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 63
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 37-47 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: An examination is made of displacement trial functions found in the quadratic isoparametric representation of an arc. Special attention is given to the quality of curvature change description and to effective manipulation of the trial functions. Various interpolation formulae are derived which have relevance to curved shell finite element design under Love-Kirchhoff assumptions.
    Zusätzliches Material: 2 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 64
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 59-71 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: Thin-walled members subject to generalized loading may be modelled by using a finite element approach with conventional stress and strain parameters. A solution method for a class of problems that would use these elements is described. A numberical example of an elastic beam is given.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 65
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 125-140 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: The computational methods used to predict and optimize the thermal-structural behaviour of aerospace vehicle structures are reviewed. In general, two classes of algorithms, implicit and explicit, are used in transient thermal analysis of structures. Each of these two methods has its own merits. Due to the different time scales of the mechanical and thermal responses, the selection of a time integration method can be a difficult yet critical factor in the efficient solution of such problems.Therefore mixed time integration methods for transient thermal analysis of structures are being developed. This proposed methodology would be readily adaptable to existing computer programs for structural thermal analysis.
    Zusätzliches Material: 7 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 66
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 141-144 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: In this paper the application of the theorems of structural variation to finite element problems is presented and a simplified procedure for constant strain triangular elements is developed. Applications for these techniques are discussed.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 67
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 152-156 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 68
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 217-235 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: The mini-max dual method ia applied for solving the material selection structural optimization problems. A somewhat general objective function is introduced to consider structural weight and material cost simultaneously. It is expressed by the sum of scaled structural weight and material cost. The present formulation can yield minimum cost and minimum weight designs as two distinct special cases. It is shown that practically useful intermediate optimal designs can exist between the two extremes. Only truss structures are considered as a representative example. One numerical example is provided to illustrate the change in optimal material distribution when various objective functions are employed. A particular advantage in using the dual method for the material selection problem is also described.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 69
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 271-280 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: The finite element reduced scalar potential method of calculating magnetic fields is investigated by comparing it with a classical series method. Both methods are applied to two problems having a current band surrounding a ferromagnetic shell. The magnetic field distributions obtained by both methods are shown to be in generally good agreement.
    Zusätzliches Material: 8 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 70
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 310-310 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 71
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 312-314 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 72
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 331-340 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A finite strip method is presented for the geometrically nonlinear analysis of prismatic structures under arbitrary loading. The method employs an iterative finite element approach but replaces numerical integration by an explicit formulation. A computer program has been developed and is described in the paper; a numerical example is given.
    Zusätzliches Material: 3 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 73
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 405-419 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A stabilization procedure is developed for controlling the kinematic modes of the four-node, bilinear quadrilateral element when single-point quadrature is used. These kinematic modes manifest themselves by spatial oscillations or singularity of the total stiffness. In this stabilization procedure, additional generalized strains are defined which are activated by the kinematic modes; these generalized modes are furthermore not activated by rigid body motions regardless of the shape of the quadrilateral. By using a scaling law developed in an earlier paper, the stabilization parameters are defined so they do not adversely affect the element's performance. Several problems which are subject to kinematic modes are presented to illustrate the performance of this stabilization procedure for linear problems.
    Zusätzliches Material: 11 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 74
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 473-478 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A method is developed which basically concerns how to reduce the necessary storage and cost of solving a set of algebraic equations arising from applying the initial stress technique to the analysis of a uniformly layered elastic-plastic soil. Advantage is taken of the geometrical symmetry of the problem and the consequent symmetry of the stiffness matrix. The nodal values are expanded in a discrete Fourier series so that a two-dimensional problem is reduced to a number of one-dimensional problems.
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 75
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 495-503 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: We consider numerical methods for initial value problems for second-order systems of ordinary differential equations, analysing them by applying them to the test equation We discuss conditions which ensure an oscillatory numerical solution and the desirability of such a property. We also use a slightly more general test equation to derive conditions which ensure that the numerical forced oscillation is in phase with the true forced oscillation.To illustrate the theory, we consider the damping and phase properties of some frequently used methods.
    Zusätzliches Material: 1 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 76
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 541-566 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: An elasto-plastic analysis of anisotropic plates and shells is undertaken by means of the finite element displacement method. A thick shell formulation accounting for shear deformation is considered, which is based on a degenerate three-dimensional continuum element. The accommodation of variable material properties, not only along the surface of the structure but also through the thickness, is made possible by a discrete layered approach. Although isoparametric elements of the Serendipity family give satisfactory solutions for thick and moderately thin shells the results exhibit ‘locking’ for an increasing ratio of span to thickness. To develop a numerical model which is applicable to thick or thin plates and shells, the nine-node Lagrangian element and the Heterosis element are also introduced into the present model. Plastic yielding is based on the Huber-Mises yield surface extended by Hill for anisotropic materials. The yield function is generalized by introducing anisotropic parameters of plasticity which are updated during the material strain hardening history. Numerical examples are presented and compared with available solutions. The effects of anisotropy on these solutions are also discussed.
    Zusätzliches Material: 14 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 77
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 625-625 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 78
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. i 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 79
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 631-646 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: When a homogeneous elastic continuum is modelled by a non-uniform finite element grid, the differences in the size of adjacent finite elements can cause a spurious wave reflection which does not exist in the continuum. Extending previous studies in which the spurious wave reflection was investigated for the case of two uniform grids with a sudden element size change from one grid to the other, the present study deals with the case when the two uniform grids of different element sizes are separated by a transition zone through which the element size varies gradually, either by a geometric progression or by an arithmetic progression. The solution is carried out in complex variables and numerical plots of the results are given. When the ratio of wavelength to the largest element size is as low as 4 : 1, the spurious wave reflection is very significant, while for the ratios over 10 : 1 it is insignificant. Inserting a transition zone with gradually varying element size between the two uniform parts of the grid somewhat mitigates the phenomenon of spurious reflection, but this is significant only when the ratio of element sizes in the uniform grids is small (less than about 1·5 : 1). Varying the element size throughout the transition zone in an arithmetic progression seems slightly better than in a geometric progression. The spurious wave reflection is less pronounced for higher-order elements, in particular for linear strain elements as compared to constant strain elements. The spurious reflection is also less severe for consistent mass than for lumped mass.
    Zusätzliches Material: 9 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 80
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 725-737 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: We have assessed the accuracy of a commercially available computer software package for finite element method calculations of magnetostatic fields. The computer program, MSC/NASTRAN,Available from the MacNeal-Schwendler Corporation, Los Angeles, CA 90041, U.S.A. is well known for its wide applicability in structural analysis and heat transfer problems. We exploit the fact that the differential equations of magnetostatics are identical to those for heat transfer if the magnetic field problem is formulated with the reduced scalar potential.1 Consequently, the powerful, optimized numerical routines of NASTRAN can immediately be applied to two- and three-dimensional linear magneto-statics problems. Application of the NASTRAN reduced scalar potential approach to a ‘worst case’ two-dimensional problem for which an analytic solution is available has yielded much better accuracy than was recently reported2 for a reduced scalar potential calculation using a different finite element program. Furthermore, our method exhibits completely satisfactory performance with regard to computational expense and accuracy for a linear electromagnet with an air gap. Our analysis opens the way for large three-dimensional magnetostatics calculations at far greater economy than is possible with the more commonly used vector potential and boundary integral methods.
    Zusätzliches Material: 12 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 81
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 789-802 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: This paper presents an algorithm which determines the invertibility of any planar, triangular quadratic isoparametric finite element transformation. Extensions of the algorithm to three-dimensional isoparametric finite element transformations yield conditions which guarantee invertibility of 10-node tetrahedra and 8-node bricks. The mathematical basis for the algorithm focuses on the Jacobian as a continuous function defined over a compact set where the Jacobian attains a maximum and a minimum value. The algorithm then determines whether these values are of opposite sign.
    Zusätzliches Material: 7 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 82
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 825-829 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: The pulse-spectrum technique (PST), an iterative numerical algorithm, is presented and extended to solve the inverse problems arising from the dynamic structural identification and structural design problems. A simple one-dimensional shear beam model is used to demonstrate the applicability of PST. Numerical simulations are carried out to test the feasibility and to study the general characteristics of this technique without the real measurement and design data. It is found that the PST is not only quite robust in providing accurate results but also an excellent numerical method according to the four practical criteria for evaluating numerical methods.
    Zusätzliches Material: 1 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 83
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 891-911 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A two-step approach to finite element ordering is introduced. The scheme involves ordering of the finite elements first, based on their adjacency, followed by a local numbering of the nodal variables. The ordering of the elements is performed by the Cuthill-McKee algorithm. This approach takes into consideration the underlying structure of the finite element mesh, and may be regarded as a ‘natural’ finite element ordering scheme. The experimental results show that this two-step scheme is more efficient than the reverse Cuthill-McKee algorithm applied directly to the nodes, in terms of both execution time and the number of fill-in entries, particularly when higher order finite elements are used. In addition to its efficiency, the two-step approach increases modularity and flexibility in finite element programs, and possesses potential application to a number of finite element solution methods.
    Zusätzliches Material: 8 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 84
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 943-948 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: The matrix N(λ) whose elements are functions of a parameter λ is called the λ-matrix. Those values of λ that make the matrix singular are of great interest in many applied fields. An efficient method for those eigenvalues of a λ-matrix is presented. A simple explicit convergence criterion is given, as well as the algorithm and two numerical examples.
    Zusätzliches Material: 2 Tab.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 85
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983) 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 86
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 950-950 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 87
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 951-952 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 88
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 953-970 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A new boundary element technique based on Green's formula is applied to the analysis of nonlinear water wave problems. The problems are formulated mathematically as two-dimensional nonlinear initial-boundary value problems in terms of a velocity potential, assuming the fluid to be inviscid and incompressible, and the flow to be irrotational.In the present paper, two kinds of wave-making problems are analysed: (1) a tsunami generated by sea bed elevation; (2) generation, propagation and run-up on a vertical wall of a solitary wave. Numerical results obtained by the present method are compared with available experimental data and analytical solutions. Excellent agreements are obtained.
    Zusätzliches Material: 18 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 89
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 985-993 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: In Reference 1 a series of general formulae for evaluating the total number of non-zero blocks in the stiffness matrix, both of two-dimensional and three-dimensional (arbitrary polygonal/polyhedral) finite element networks, was presented. In this paper, an alternative, more direct and efficient method for deriving such formulae is presented. In addition, this new method can be used for more complex situations. In fact, it may be used for almost all kinds of finite element networks.
    Zusätzliches Material: 1 Tab.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 90
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 1005-1032 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A technique is developed for the numerical analysis of wave motion in layered strata. Semidiscrete particular solutions satisfying inhomogeneous boundary conditions are calculated by the finite element method. These solutions are combined with semidiscrete modes of an appropriate eigenvalue problem. The boundary conditions corresponding to rigid and rough footings on a layered stratum are treated in detail. Applications are considered which demonstrate the validity of the technique.
    Zusätzliches Material: 12 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 91
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 1033-1045 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: The nonlinear diffusion equation as applied to two-dimensional time-dependent magnetic fields is solved with a finite element algorithm. This algorithm permits the analysis of problems possessing complex geometries, induced eddy currents, permanent magnets, and nonperiodic excitation currents. The numerical procedure utilizes implicit time stepping with an iterative scheme to solve the resulting set of equations. Two examples of applications of this program are presented.
    Zusätzliches Material: 15 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 92
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 995-1004 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: This paper describes a new contouring algorithm for isoparametric elements which can be used to map three-dimensional scalar fields. The contours are generated on arbitrary planes intersecting finite element structures. Tracing element contour lines is accomplished by an accurate predictor-corrector technique. A method of finding starting points for the algorithm on the boundary of the elements is also given.
    Zusätzliches Material: 3 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 93
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 971-984 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: Finite element models for linear elastic plane stress problems which provide, alternatively, a completely compatible displacement field or a precisely equilibrated stress field are developed. The basis for both models is a biquintic interpolation polynomial representing Airy's stress function over a triangular region. The polynomial coefficients are modified and grouped to establish compatibility while retaining equilibrium within each element. Nodal kinematic parameters are selected and matched to the stress function for the compatible (modified stiffness) model, while nodal stress function parameters are chosen for the equilibrium (modified flexibility) model. Constraints on the global freedoms, enforced by Lagrange multipliers, are introduced to augment nodal connectivity in establishing interelement compatibility in the ‘stiffness’ model and uniform stress transmission in the ‘flexibility’ model. Appropriate boundary conditions are formed for each model. Numerical solutions are obtained and assessed.
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 94
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 1063-1072 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: Earlier formulations of the finite element approach to cylindrical (rz) field problems led initially to variational expressions containing a simple term in 1/r and consequent attempts to remove it by appropriate choice of interpolation functions. The present paper uses new interpolation functions which ensure that the field behaviour near the axis is correctly modelled. High-order finite elements up to order four are derived and tested on a special cylindrical geometry to confirm, in a practical case, the theoretical claims of improved rates of convergence in solving problems of engineering significance.
    Zusätzliches Material: 1 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 95
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 1047-1052 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: An improved bisection strategy is presented to determine the eigenvalues of a real symmetric tridiagonal matrix which occurs in a simple column buckling problem. The new strategy, which involves only a minor modification, utilizes incomplete Sturm sequences only as long as relevant information on the next and following eigenvalues is obtained resulting in a minimization of the computational work. The strategy is particularly effective if only a few eigenvalues are required. The technique can be used for a wider class of eigenvalue problems than the illustrative one presented here.
    Zusätzliches Material: 3 Tab.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 96
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 1073-1077 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Zusätzliches Material: 4 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 97
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 1105-1107 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Zusätzliches Material: 2 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 98
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 1107-1109 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 99
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983), S. 1079-1103 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Notizen: A general method is presented for the isothermal mechanical analysis of incompressible material solids in which a small-amplitude time harmonic oscillation is superposed on a static finite deformation field. Material behaviour is assumed to be of the ‘fading memory’ type describable by the finite linear viscoelasticity theory of Coleman and Noll.4 Existing finite element codes, that treat finite elasticity material behaviour, can be extended with minor modifications to treat the subject problem. A specialized form of the finite linear viscoelasticity constitutive equations proposed by Morman8 has been implemented in the MARC nonlinear finite element program for predicting the response of statically deformed elastomeric components to small amplitude vibrations. Numerical results obtained with MARC for the static force-deflection behaviour and dynamic (complex) stiffness for a viscoelastic cylinder subject to combined axial and twisting pre-loads, are in excellent agreement with corresponding analytical results.
    Zusätzliches Material: 8 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 100
    Digitale Medien
    Digitale Medien
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 19 (1983) 
    ISSN: 0029-5981
    Schlagwort(e): Engineering ; Engineering General
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Mathematik , Technik allgemein
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
Schließen ⊗
Diese Webseite nutzt Cookies und das Analyse-Tool Matomo. Weitere Informationen finden Sie hier...