ALBERT

Description: Soils and landscapes are bridges of space and time, as they simultaneously and authentically show essential aspects that were previously separated by time and space (such as cultural and activity-related aspects from past and present) to the trained observer - albeit only in excerpts. Therefore, this article presents a series of impact indicators for soil changes, starting with extreme (anthropogenic) interventions and ending with equally extreme ("natural") events. An essential difference to specifically planning-relevant or human ecological concepts, which, for example, specify land use/load categories, is that the following impact indicators perceive soils as a phenomenon in themselves and do not define them through attributed functions. Particular attention is focused on their changeability and vital development potential, as well as on their property as a sphere of penetration of living and material things, with emphasis on the noetic effect. The intervention or event spaces on the earth's surface can be differentiated quantitatively through the type, strength, and duration of the phenomena. The intensity of all processes can be described by amplitude (the strength of the interventions/events) and frequency (the repetition rate of the interventions/events) and can be specifically identified and quantified by, for example, material inputs or outputs per unit of time. For the first time, there would be a system for measuring the ecological quality of anthropogenic land use, which could serve as an "alert system for the external technological culture," and could help us become aware of our "inner" culture.

Description: research

Description: Die Jubiläumsschrift zum 75jährigen Bestehen der Deutschen Geophysikalischen Gesellschaft (DGG) enthält zahlreiche Beiträge von Mitgliedern zu vier Schwerpunkten: 1) Eine Aktualisierung der Geschichte der DGG vor allem zu den an Ereignissen reichen letzten 25 Jahren sowie Ergänzungen zu vorausgegangenen Darstellungen. 2) Die Darstellung der Geschichte geophysikalischer Institute und Institutionen in Deutschland inklusive eines Rückblicks auf das erfolgreiche Wirken ihrer verdienstvollen Persönlichkeiten. 3) Die Beschreibung einer Auswahl in der deutschen Geophysik angegangener Großprojekte der letzten 25 Jahre. 4) In Anlehnung an die Festschrift zum 50jährigen Gründungsjubiläum ist schließlich noch ein Kapitel zu geophysikalischen 'Detailthemen' ausgeführt. In ihm sind auch Beiträge enthalten, die Traditionslinien bzw. Arbeiten betreffen, die in der früheren DDR aufgenommen worden waren und z.T. keine direkte Fortsetzung an einer Nachfolgeinstitution gefunden haben.

Description: commemorativepublication

Description: Wird heute genug für die wissenschaftliche und technologische Steuerung des sich immer rasanter vollziehenden globalen und regionalen Wandels der Bio- und Geosphäre getan? Hat die internationale Gemeinschaft die Kraft zu einem sinnvollen, übergreifenden "Umwelt-Management"? Geophysik kann auf Grund ihrer interdisziplinären Stellung innerhalb der Naturwissenschaften und mit ihren vielfältigen Beziehungen zur Technik zum effizienten Einsatz der Kräfte und Mittel beitragen - in einer Zeit weltweiter sozialer, politischer und eben auch ökologischer Konflikte. Geophysik kann notwendige Prioritäten wissenschaftlich begründen und verfechten und somit helfen, weittragende und konsensfähige Entscheidungen vorzubereiten, um gesellschaftliche Akzeptanz und Unterstützung für die Politik zu erreichen. Die Deutsche Geophysikalische Gesellschaft - getragen von ihrer Verantwortung um den Beitrag der Geophysik für die gemeinsame Zukunft - wendet sich im 75. Jahr ihres Bestehens mit dieser Denkschrift an die Öffentlichkeit. Teil I enthält einen Überblick zur Spezifik, zur Stellung, zu den Zielen und zur Bedeutung der Geophysik. Im Teil II stellen führende Geophysiker ausgewählte Beispiele moderner geophysikalischer Forschung vor. Teil III ist statistisch angelegt und gibt einen kurzen Überblick zu den in Deutschland angesiedelten Institutionen geophysikalischer Lehre und Forschung. Die Denkschrift "Mit Geophysik in die Zukunft" will Politiker, Industrielle, Wissenschaftler, Vertreter der Medien und interessierte Bürger erreichen, um im Interesse des Gemeinwohls zu angemessener Wissenschaftsförderung und kluger Zukunftsgestaltung beizutragen.

Description: commemorativepublication

Description: DFG, SUB Göttingen

Description: Inhaltsverzeichnis : EHLERS, J. & MENSCHING, H.: Küstenversatz und Prielverlagerungen an der Nordseeküste. S. 9-22 ; FRÄNZLE, O.: Periglaziäre Formung der Altmoränengebiete Schleswig-Holsteins. S. 23-35 ; HEMPEL, L.: Rezente und fossile Mesoformen der Abtragung und Aufschüttung in Ausräumen von Schichtkammlandschaften im Teutoburger Wald. S. 37-47 ; LEHMEIER, F.: Zum Formenschatz der Schichtkammlandschaft im Niedersächsischen Bergland. S. 49-61 ; GARLEFF, K., BRUNOTTE, E. & STINGL, H.: Fußflächen im zentralen Teil der Hessischen Senke. S. 63-76 ; MÖLLER, K.: Das Eschweger Becken und seine Randbereiche — Ergebnisse geomorphographischer und hydrochemischer Analysen. S. 77-92 ; GLATTHAAR, D.: Vertikalbewegungen und ihre Bedeutung für die Formenentwicklung im Westerwald. S. 93-106 ; MÜLLER, M.J.: Periglaziärfluviale, solifluidale und abluale Formung im westlichen Hunsrück und am Ostrand der Trier-Bitburger Mulde. S. 107-118 ; BARSCH, D. & MÄUSBACHER, R.: Zur fluvialen Dynamik beim Aufbau des Neckarschwemmfächers. S. 119-128 ; LESER, H.: Schichtstufen und Talrandstufen in Südwestdeutschland. S. 129-147 ; FARRENKOPF, D.: Relief und Wasserhaushalt im Eyachtal, Nordschwarzwald. S. 149-154 ; LESER, H. & METZ, B.: Vergletscherungen im Hochschwarzwald. S. 155-175 ; HABBE, K.A.: Was kann eine geomorphologische Vollkartierung für die Stratigraphie des Quartärs leisten? S. 177-196 ; RATHJENS, C.: Jungglaziale Formung und spätglazialer Eisabbau im Chiemgau. S. 197-205 ; FISCHER, K.: Die würmzeitliche und stadiale Vergletscherung der Berchtesgadener Alpen. S. 207-225 ;

Description: research

Description: DFG, SUB Göttingen

Description: Zur Vereinfachung wird die Vielfalt der Karstformenbezeichnungen bereinigt. Erdfall wird als Form, die in nicht verkarstungsfähigen Serien liegt, aber auf Tiefensubrosion zurückgeht, der Doline, einer Form, die in verkarstungsfähigem Material liegt, gegenübergestellt. Als Grundlage der Arbeit wurde eine detaillierte Kartierung der Auslaugungsformen durchgeführt. Hinsichtlich rezenter Subrosion erwies es sich als notwendig, die in Oberflächenwässern und wasserwirtschaftlich erfaßten Wässern gelösten Bestandteile von Chlorid, Sulfat und Karbonat zu ermitteln. Die Auswertung der gewonnenen Daten zeigt, daß ein Zusammenhang mit Gebieten besteht, die durch aktuelle Erdfälle und Dolineneinbrüche gekennzeichnet sind. Als Voraussetzung zur Reliefgenese gilt, daß das Gebiet des Unterwerra-Sattels entscheidend durch die saxonische Gebirgsbildung an der Wende Jura/Kreide und die nachfolgende klimageomorphologische Entwicklung geprägt ist. Anhand der geomorphographischen Analyse wird der Einfluß der Salz-, aber auch der Sulfatauslaugung auf die Landschaftsgenese belegt. Die Auslaugung des Salzes (Nal), dessen Mächtigkeit im Untersuchungsgebiet mit mindestens 120 m angenommen wird, und der unterlagernden ca. 130 m nächtigen Zechsteingipse (A 1 - A 3) zerrüttet die überlagernden triassischen Schichten weiter. Darüber hinaus wirkt die Subrosion von mehr als 30 m Rötgipsen und 50 m Gipsen des Mittleren Muschelkalkes im Hangenden des Zechsteins reliefformend. Die ermittelten Ergebnisse - rezente und subrezente Formen, Lösungswerte – werden zunächst in kleineren Gebietseinheiten analysiert. Die Ergebnisse der Nasseranalysen bestätigen das geomorphographische Ergebnis, so daß in Anlehnung an die Gipshorizonte von Stockwerkssubrosion gesprochen werden kann. Entscheidend geprägt ist die heutige Situation jedoch durch vorangegangene Zechsteinsalzauslaugung im tieferen Untergrund. Diese hat in den Hangendserien die Wasserwegsamkeit verstärkt, so daß die nachfolgende Sulfatsubrosion den Kleinformenschatz vor der Schichtstufe des Mittleren Buntsandsteins steuern konnte. Aufgrund ihrer für Auslaugungsgebiete typischen Ausprägung wird die Lage der Schichtstufe in weiten Teilen des Untersuchungsgebietes an das in Auslaugung befindliche Salz geknüpft. Das Auftreten von Subrosionsformen vor der Landstufe des Kaufunger Waldes, den östlichen Meißnerhängen, dem Anstieg des Schlierbachswaldes sowie vor dem Anstieg des Buntsandsteins zwischen Heldra, Frieda und Bad Sooden-Allendorf untermauert diese Interpretation. In der südlichen und südöstlichen Umrahmung des Untersuchungsgebietes wird der Salzhang aufgrund geomorphographischer Kriterien unter dem Steilanstieg des Unteren Muschelkalkes ausgewiesen. Aufgrund dieser Befunde wird die primäre Salzverbreitung als über den Unterwerra-Sattel reichend angenommen, womit sich, abgesehen von den Einflüssen der saxonischen Tektonik, alle Reliefentwicklungsprozesse allein durch Auslaugung und folgende geomorphologische Überprägung erklären lassen. Darüber hinaus ist dieses Gebiet in Nordhessen nicht nur durch eine über alle Schichten hinweggreifende Rumpfflächenbildung gekennzeichnet, sondern die Resistenzunterschiede wurden - unabhängig vom Klima - beständig herausgearbeitet. Aus diesen Ergebnissen wurde ein übergeordnetes Modell zur Reliefentwicklung erstellt. Danach existieren im Untersuchungsgebiet fünf Reliefgenerationen, wobei die postsaxonische Reliefentwicklung mit zerstörtem, die Auslaugung begünstigendem Hangendverband nach der Landhebung bzw. dem Einbruch der das Gebiet begrenzenden Grabenstrukturen, die bis ins Alttertiär reicht, nicht erfaßt werden konnte. [...]

Description: research

Description: DFG, SUB Göttingen

Description: In der vorliegenden Arbeit wurden Ergebnisse hydrologischer und stratigraphischer Studien zur Entwicklungsgeschichte von Brandenburger Kesselmooren vorgestellt. Für die Erfassung der aktuellen und historischen biotischen und abiotischen Standortfaktoren wurden verschiedene Methoden angewandt: floristische und vegetationskundliche Untersuchungen sowie hydrologische, hydrochemische, geochemische, geophysikalische und sedimentologische Untersuchungen und Makrorest-‚ Mikrorest- und Pollenanalyse. Der zeitlichen Einordnung der entwicklungsgeschichtlichen Prozesse dienten Radiocarbondatierungen und die pollenanalytischen Untersuchungen. Ziel der Arbeit war es, Entwicklungsstadien auszuscheiden, die von den untersuchten Mooren seit ihrer Entstehung durchlaufen wurden. Aufgrund der stratigraphischen Untersuchungen wurden Aussagen zur Beckengenese und zu den einzelnen See- und Moorentwicklungsphasen getroffen, zum Verlandungsvorgang, zu Moorbildungsbedingungen und Sukzessionsstadien. Den Entwicklungsstadien konnten über geochemische und -physikalische Untersuchungen abiotische Standortfaktoren zugeordnet werden. Die aktuellen Standortveränderungen wurden erfaßt und die vorgenommenen Erhaltungs- und Wiedervernässungsmaßnahmen dokumentiert und bewertet.

Description: research

Description: DFG, SUB Göttingen

Description: Dieser Band enthält 63 Artikel zu Themengebieten der Physik der festen Erde, zu magnetischen und elektrischen Feldern der Erde, zu der Physik der Atmophäre und der angewandten Geophysik veröffentlicht durch die Deutsche Geophysikalische Gesellschaft in dem Jahr 1934.

Description: 〈html〉 〈body〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0004.pdf"〉Titelseite〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0005.pdf"〉Autorenverzeichnis〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0006.pdf"〉Sachverzeichnis〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0007.pdf"〉Karl Mack †〈/a〉〈br〉(Hiller, W.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0008.pdf"〉Die südalbanischen Erdbeben 1930/31〈/a〉〈br〉(Nowack, E.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0009.pdf"〉Seismische Untersuchungen des Geophysikalischen Instituts in Göttingen〈/a〉〈br〉(Gräfe, H., v. zur Mühlen, W., Müller, H. K.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0017.pdf"〉Horizontalsicht bei örtlich veränderlicher Trübung und Beleuchtung〈/a〉〈br〉(Steinhäusser, H.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0018.pdf"〉Referate und Mitteilungen〈/a〉〈br〉(Haase, H., Köhler, R., Berroth, A.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0019.pdf"〉Beitrag zur Berechnung von Minimum-Stabpendeln〈/a〉〈br〉(Graf, A.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0020.pdf"〉Zur Theorie elastischer Pendel mit besonderer Berücksichtigung des Holweck-Lejayschen Stabpendels〈/a〉〈br〉(Graf, A.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0021.pdf"〉Eine neue Methode für sehr präzise magnetische Messungen〈/a〉〈br〉(Koulomzine, T., Bondaletoff, N.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0022.pdf"〉Zur Frage der mit dem temperaturkompensierten Magnetsystem erreichbaren Meßgenauigkeit〈/a〉〈br〉(Kohl, E.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0023.pdf"〉Die Höhenverteilung der Erd-, Luft- und Höhenstrahlung〈/a〉〈br〉(Suckstorff, G. A.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0024.pdf"〉Erdstrahlungsmessungen in Bad Nauheim nach der Gammastrahlenmethode〈/a〉〈br〉(Masuch, V.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0025.pdf"〉Referate〈/a〉〈br〉(Jung, H.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0026.pdf"〉Abschnitt〈/a〉〈br〉(Angenheister, G., Kohlschütter, E.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0027.pdf"〉Hergesell geb. 29. Mai 1859〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0028.pdf"〉Hecker geb. 21. Mai 1864〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0029.pdf"〉Sprengungen zur Forschungszwecken mit Unterstützung der Notgemeinschaft der Deutschen〈/a〉〈br〉(Duckert, P.)〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0037.pdf"〉Beiträge zu den Luftschallmessungen〈/a〉〈br〉(Meißer, O., Martin, H.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0039.pdf"〉Seismische Untersuchungen des Geophysikalischen Instituts in Göttingen〈/a〉〈br〉(Regula, H.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0042.pdf"〉Berechnung der Laufzeitkurven des anormalen Schalles für windstille Atmosphäre und Vergleich mit der Laufzeitkurve der Oldebroek-Sprengung vom 15. Dezember 1932〈/a〉〈br〉(Jung, H.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0043.pdf"〉Ergebisse der Registrierungen von Schallwellen an kreisförmig um den Sprengherd angeordneten Stationen〈/a〉〈br〉(Duckert, P.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0044.pdf"〉Beobachtungsergebnisse über den Einfluß der "akustischen Umkehrschicht" auf die Schallausbreitung〈/a〉〈br〉(Sandmann, B.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0045.pdf"〉Zur Frage der anomalen Schallausbreitung〈/a〉〈br〉(Kölzer, J.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0046.pdf"〉Schalluntersuchungen im Polargebiet〈/a〉〈br〉(Wölcken, K.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0049.pdf"〉Betrachtungen über ebene Pendel〈/a〉〈br〉(Hahnkamm, E.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0051.pdf"〉Außenraum und Innenraum (Schlichtung des Streites um die Schwerkraftreduktion)〈/a〉〈br〉(Schwinner, R.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0052.pdf"〉Bemerkungen zu den Geoiden von Ackerl und Hirvonen〈/a〉〈br〉(Ledersteger, K.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0053.pdf"〉Auto-Radio als Hilfsmittel geologischer Kartierung〈/a〉〈br〉(Cloos, E.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0054.pdf"〉Zur photographischen Registrierung von Stationsseismometern〈/a〉〈br〉(Meißer, O.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0056.pdf"〉Ein Horizontalseismometer für die Aufzeichnung von starken Orts- und Nahbeben〈/a〉〈br〉(Critikos, N. A.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0059.pdf"〉Die Bedeutung der Unstetigkeiten im Verlauf der Schallgeschwindigkeit mit der Höhe für die normale und anomale〈/a〉〈br〉(Sandmann, B.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0060.pdf"〉Referate und Mitteilungen〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0061.pdf"〉Die Relativität der Undulationen〈/a〉〈br〉(Hopfner, F.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0062.pdf"〉Ein detonierendes Meteor über dem Weserbergland am 2. Januar 1934〈/a〉〈br〉(Hartmann, W.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0063.pdf"〉Der Meteorfall bei Stadt Rehburg am 2. Januar 1934〈/a〉〈br〉(Trommsdorff, W.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0064.pdf"〉Vergleich zwischen der Intensität der kosmischen Ultrastrahlung über Grönland und über Deutschland〈/a〉〈br〉(Wölcken, K.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0065.pdf"〉Das Grundeis〈/a〉〈br〉(Jakuschoff, P.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0066.pdf"〉Le problème des microséismes et le déferlement des vagues〈/a〉〈br〉(Gherzi, E.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0067.pdf"〉Note on the Hayford-Bowie tables for calculation 〈i〉g〈/i〉〈/a〉〈br〉(Bullard, E. C.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0068.pdf"〉Kann die Laplacesche Differentialgleichung für das Schwerkraftpotential auch innerhalb der Erdkruste als erfüllt angesehen werden?〈/a〉〈br〉(Grabowski, L.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0069.pdf"〉Vorträge, gehalten auf der XI. Tagung der Deutschen Geophysikalischen Gesellschaft, am 13. bis 15. September 1934 in Pyrmont〈/a〉〈br〉(Jung, K.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0072.pdf"〉Der geophysikalische Nachweis des Zechsteindolomits〈/a〉〈br〉(Müller, M.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0073.pdf"〉Berichtigung〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0074.pdf"〉Vorträge, gehalten auf der XI. Tagung der Deutschen Geophysikalischen Gesellschaft, am 13. bis 15. September 1934 in Pyrmont〈/a〉〈br〉(von Seidlitz, W., Sieberg, A., Linke, F., Gerlach, W.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0079.pdf"〉Zur Frage der Geländekorrektion bei Drehwaagemessungen〈/a〉〈br〉(Tuchel, G.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0080.pdf"〉Emanation in Boden- und Freiluft〈/a〉〈br〉(Israël, H.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0081.pdf"〉Die Energie der Heliokathodenstrahlen in ihrer Beziehung zur fortschreitenden Bewegung der Elektronen in den Polarlichtstrahlen〈/a〉〈br〉(Rudolph, H.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0082.pdf"〉Weitere Untersuchungen mit dem Sanford-Elektrometer〈/a〉〈br〉(Stoppel, R.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0083.pdf"〉Das Strömungssystem der Luft über Mogadischu〈/a〉〈br〉(Bossolasco, M.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0084.pdf"〉Messungen mit transportablen statischen Schweremessern〈/a〉〈br〉(Schleusener, A.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0086.pdf"〉Über den Energietransport bei der Sprengseismik〈/a〉〈br〉(v. Schmidt, O.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0087.pdf"〉Formen der Bodenschwingung bei sinusförmiger Anregung〈/a〉〈br〉(Köhler, R.)〈/li〉 〈li〉〈a href=" https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0088.pdf"〉Die Ausbreitungsgeschwindigkeit sinusförmiger elastischer Wellen im Boden〈/a〉〈br〉(Ramspeck, A.)〈/li〉 〈li〉〈a href=" https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0089.pdf"〉Referate und Mitteilungen〈/a〉〈br〉(Haase, H.)〈/li〉 〈li〉〈a href=" https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0090.pdf"〉Bericht über die elfte Tagung der Deutschen Geophysikalischen Gesellschaft vom 13. bis 15. September 1934 in Bad Pyrmont〈/a〉〈br〉(Jung, K.)〈/li〉 〈li〉〈a href=" https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0091.pdf"〉Berichtigung〈/a〉〈/li〉 〈li〉〈a href=" https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0092.pdf"〉Geophysikalische Berichte〈/a〉〈/li〉 〈li〉〈a href=" https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0093.pdf.pdf"〉Register der Geophysikalischen Berichte〈/a〉〈/li〉 〈li〉〈a href=" https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0010/LOG_0094.pdf"〉Mitgliederverzeichnis der Deutschen Geophysikalischen Gesellschaft nach dem Stande vom 1. Dezember 1934〈/a〉〈/li〉 〈/body〉 〈/html〉

Description: research

Description: DGG, DFG, SUB Göttingen

Description: Deutschlands Erdbebentätigkeit pflegt unterschätzt zu werden, weil sie gewöhnlich so harmlos erscheint. Zwar bringt der Jahresverlauf nur wenige Beben, abgesehen von gelegentlichen Schwärmen mit vielen hunderten von Einzelstößen, wie sie besonders dem Vogtland eigentümlich sind. Zudem handelt es sich dabei vorwiegend um schadlose Erderschütterungen, die kaum Beobachtung finden. Aber der Fachmann kennt daneben auch bis in die neueste Zeit hinein Erdbeben mit erheblichen Schäden und selbst Zerstörungen, die für längere Zeit das öffentliche Leben völlig beherrscht haben; mitunter wurde fast Großbebencharakter erreicht.

Description: research

Description: DFG, SUB Göttingen

Description: Die nachstehenden neueren Untersuchungen auf verschiedenen Gebieten geophysikalischer Forschung, die von Mitgliedern der Reichsanstalt für Erdbebenforschung in Jena durchgeführt sind, wurden erstmalig in der Festschrift zum 70. Geburtstage des früheren Direktors der Reichsanstalt, Herrn Geheimrat Professor Dr. Oskar Hecker (Beitrage zur Angewandten Geophysik, Band 4, Heft 3, Leipzig 1934) veröffentlicht. Sämtliche Arbeiten, ausgenommen diejenigen von Krumbach, gehören zu den von der Notgemeinschaft der Deutschen Wissenschaft unterstützten geophysikalischen Forschungen. A. Sieberg

Description: research

Description: DFG, SUB Göttingen

Description: Am Beispiel des "Leegmoores" im Timpemoor - einem ehemaligen "Heidemoor" - wurde auf Grund von boden- und moorkundlichen Untersuchungen sowie von landeskundlich-historischen Recherchen die Entwicklung der Heidemoore überprüft. Dazu wurden erstmalig die flächenhaften Verluste an Moorsubstanz durch - wiederholte Moorbrandkultur, - Entnahme von Heidesoden (Abplaggen) und - Winderosion qualitativ und quantitativ erfaßt, dazu die Moorsackung errechnet. Aus den vorhandenen moorkundlichen Fakten konnte das natürliche Moorrelief des Timpemoores rekonstruiert werden. Die Autoren weisen nach, daß die von JONAS (1934, 1935) beschriebenen Heidemoore "durch den Menschen beeinflußte Moore" darstellen. Das untersuchte Timpemoor hat sich danach im Verlauf mehrerer Jahrhunderte aus einem natürlichen gewölbten Hochmoor gebildet.

Description: On the basis of pedological, peatland and historical investigations the origin of raised bogs with heather vegetation ("Heidemoore")was examined at the example "Leegmoor", a part of the "Timpemoor". In addition to that for the first time the loss of peat substance by - burnt-over peatland cultivation, - cutaway heather sods, - erosion by wind and - bog subsidence was calculated. With the available peatland facts it was possible to reconstruct the natural bog relief. The authors are able to demonstrate that the "Heidemoore" described by JONAS (1934, 1935) are bogs influenced by man. During the last centuries the Timpemoor developed from a natural raised bog (with convex centre) to a raised bog with heather vegetation.

Description: research

Description: DFG, SUB Göttingen

Description: Vergleichende Darstellung und Analyse der Arbeitsvorgänge in den Agrarlandschaften der Erde. Dieser Aufgabe unterzieht sich in einem ersten Schritt die vorliegende Studie. Sie strebt an, mit der Darstellung und Analyse des jährlichen Arbeitsvorganges die bisher wenig berücksichtigte dynamische Seite der Agrarlandschaft – ihre Rhythmik nämlich – in exakter Weise erfassen zu können. Im Vordergrund steht zunächst weniger die regionale als vielmehr die sachliche Erörterung, auf der Beispielsgrundlage jedoch einer regionalen Kontrastierung innerhalb Deutschlands bzw. aus naheliegenden Gründen der Bundesrepublik Deutschland. Späteren großräumigen Untersuchungen erst kann es vorbehalten sein, von der hier geschaffenen Plattform aus auf eine speziell regionale Betrachtungsweise überzugehen.

Description: research

Description: DFG, SUB Göttingen

Description: An der Hand von Erdbeben, die im Boden Deutschlands entstanden sind, sollen folgende Fragen untersucht werden: 1) Die Wirkungsweise der einzelnen Bebenherde, von denen anzunehmen ist, dass sie verschiedenartige Charaktereigenschaften haben. Hierfür ist es notwendig, festzustellen einmal Lage und geometrisches Bild des Herdes als geologische Störungsstelle, andererseits den das Erdbeben auslösenden Bewegungsvorgang in der Herdstörung. 2) Die Abhängigkeit der scheinbaren Bebenstarken innerhalb des Schüttergebietes von Bodenbeschaffenheit und Tektonik.

Description: research

Description: DFG, SUB Göttingen

Description: Dieser Band enthält 77 Beiträge zu Themengebieten der Physik der festen Erde, des magnetischen und elektrischen Felds der Erde, der Physik der Atmosphäre sowie der Angewandten Geophysik, veröffentlicht durch die Deutsche Geophysikalische Gesellschaft in den Jahren 1930.

Description: 〈html〉 〈body〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0004.pdf"〉Titelseite〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0005.pdf"〉Ein neuer Vierpendelapparat für relative Schweremessungen〈/a〉〈br〉(Meisser, O.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0007.pdf"〉Geophysikalische Messungen unter Tage〈/a〉〈br〉(Meisser, O., Wolf, F.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0008.pdf"〉Die ersten Dickenmessungen des grönländischen Inlandeises〈/a〉〈br〉(Sorge, E.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0010.pdf"〉Die seismische Bodenunruhe in Hamburg und ihr Zusammenhang mit der Brandung〈/a〉〈br〉(Mendel, H.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0012.pdf"〉Die sonnenbelichteten Nordlichtstrahlen und die Konstitution der höheren Atmosphärenschichten〈/a〉〈br〉(Vegard, L.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0013.pdf"〉Nochmals: Zur Frage der Laufzeitkurven〈/a〉〈br〉(Gutenberg, B.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0014.pdf"〉Erwiderung zur vorstehenden Arbeit von Herrn Prof. Gutenberg〈/a〉〈br〉(Krumbach, G.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0015.pdf"〉Bemerkungen zu der vorstehenden Erwiderung〈/a〉〈br〉(Gutenberg, B.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0016.pdf"〉Einfluß des Mondes auf die erdmagnetischen Elemente in Samoa〈/a〉〈br〉(Fanselau, G.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0017.pdf"〉Ein Diagramm zur Bestimmung der Differenz der Schwerestörung 〈i〉Δg〈/i〉 in zwei Beobachtungspunkten〈/a〉〈br〉(Oserezky, W.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0018.pdf"〉Zur Ermittlung ausgedehnter Schichten verschiedener Leitfähigkeit〈/a〉〈br〉(Koenigsberger, J.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0019.pdf"〉Über tägliche erdmagnetische Variationen in zwei Alpentälern〈/a〉〈br〉(Koenigsberger, J.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0020.pdf"〉Die Wirkung der obersten Erdschicht auf die Anfangsbewegung einer Erdbebenwelle〈/a〉〈br〉(Hasegawa, M.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0021.pdf"〉Über die Elastizität von Gesteinen〈/a〉〈br〉(Breyer, H.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0023.pdf"〉Über den Horizontalabstand von Pendelstationen〈/a〉〈br〉(Schwinner, R.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0024.pdf"〉Die Belowsche Methode zur Bestimmung der Wirkung gegebener Massen auf Krümmungsgröße und Gradient, ihre Verallgemeinerung für beliebige Massenformen und ihre Anwendung auf "zweidimensionale" Massenanordnungen〈/a〉〈br〉(Jung, K.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0028.pdf"〉Harmonische Schwingungen des Untergrundes〈/a〉〈br〉(Köhler, R.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0029.pdf"〉Mitteilungen〈/a〉〈br〉(Fleming, I. A., Linke, F.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0030.pdf"〉Über die Ursache der erdmagnetischen Störung im Gebiet der Freien Stadt Danzig〈/a〉〈br〉(Haalck, H.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0031.pdf"〉Die kontinentalen Verschiebungen von Amerika und Madagaskar〈/a〉〈br〉(Livländer, R.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0032.pdf"〉Magnetische Vermessung einiger tertiärer Eruptivgänge und -stöcke im sächsischen Elbsandsteingebirge〈/a〉〈br〉(Schulze, E.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0033.pdf"〉Über die Existenz einer mondentägigen Variation in den Erdströmen〈/a〉〈br〉(Egedal, J.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0034.pdf"〉Zum Trübungsfaktor〈/a〉〈br〉(Feussner, K., Friedrichs, H.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0035.pdf"〉Temperature changes between Torsion balance readings in the State of Texas〈/a〉〈br〉(Harris, S.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0036.pdf"〉Über isostatische Schwereanomalien und deren Beziehung zu den totalen Anomalien〈/a〉〈br〉(Jung, H.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0037.pdf"〉Bemerkungen zu den Ausführungen von H. Jung〈/a〉〈br〉(Ansel, E.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0038.pdf"〉Mitteilungen〈/a〉〈br〉(Linke, F.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0040.pdf"〉Wesensgleiche und wesensverschiedene Darstellungen〈/a〉〈br〉(Nippoldt, A.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0041.pdf"〉Die Säkularvariation in der Rheinpfalz in den Jahren 1850 bis 1928〈/a〉〈br〉(Burmeister, F.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0042.pdf"〉Größenverhältnis von remanentem zu induziertem Magnetismus in Gesteinen; Größe und Richtung des remanenten Magnetismus〈/a〉〈br〉(Koenigsberger, J.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0043.pdf"〉Über eine magnetische Anomalie am Lebasee in Ostpommern〈/a〉〈br〉(Reich, H.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0045.pdf"〉Die Ergebnisse der magnetischen Messungen in der Ostsee in den Jahren 1924 bis 1929〈/a〉〈br〉(v. Gernet-Reval, A.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0047.pdf"〉Erdmagnetische Messungen in Bulgarien, Mazedonien, Trazien und in der Dobrudja〈/a〉〈br〉(Popoff, K.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0048.pdf"〉Einige Bemerkungen über erdmagnetische Messungen, welche in Feodossia ausgeführt wurden〈/a〉〈br〉(Palazzo, L.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0049.pdf"〉Possible causes of abnormal polarizations of magnetic formations〈/a〉〈br〉(Heiland, C.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0050.pdf"〉Die geologische Bedeutung der Schaffung einer Isanomalenkarte der magnetischen Vertikalintensität von Deutschland〈/a〉〈br〉(Schuh, F.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0051.pdf"〉Die innere Genauigkeit von Inklinationsmessungen mit dem Erdinduktor〈/a〉〈br〉(Venske, O.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0052.pdf"〉Theorie einer neuen galvanischen Waage〈/a〉〈br〉(Bock, R.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0053.pdf"〉Messungen im Luftschiff〈/a〉〈br〉(Haussmann, K.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0054.pdf"〉Une modification de l'enregistreur à marche rapide et à petite consommation de papier de Ad. Schmidt pour l'application aux stations de l'Anneé Polaire 1932–1933〈/a〉〈br〉(la Cour, D.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0056.pdf"〉Was sagen uns die Parameter eines Magneten?〈/a〉〈br〉(Fanselau, G.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0057.pdf"〉Über die Herleitung des Potentials des täglichen erdmagnetischen Variationsfeldes〈/a〉〈br〉(Egedal, J.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0058.pdf"〉Über den Vektor der magnetischen Störungen im aperiodischen Verlauf〈/a〉〈br〉(Keränen, J.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0059.pdf"〉Forschungsmethode über den Zusammenhang zwischen der Sonnenfleckentätigkeit und den erdmagnetischen Störungen〈/a〉〈br〉(Gehlinsch, E.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0060.pdf"〉Der Temperaturverlauf im Sandboden〈/a〉〈br〉(Süring, R.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0061.pdf"〉Die dominierende Luftdruckwelle des strengen Winters 1928/29〈/a〉〈br〉(Weickmann, L.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0063.pdf"〉Über einige meteorologische Begriffe〈/a〉〈br〉(Tetens, O.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0066.pdf"〉Über die Feinstruktur des Temperaturgradienten längs Berghängen〈/a〉〈br〉(Wagner, A.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0067.pdf"〉Das unperiodische Element im Tropenklima〈/a〉〈br〉(Knoch, K.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0068.pdf"〉Zur Theorie der Maxwellschen Geschwindigkeitsverteilung in turbulenten Strömungen〈/a〉〈br〉(Ertel, H.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0069.pdf"〉Wie tief dringen die Polarlichter in die Erdatmosphäre ein?〈/a〉〈br〉(Störmer, C.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0072.pdf"〉Gammastrahlen an Kaliumsalzen〈/a〉〈br〉(Kolhörster, W.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0073.pdf"〉Über die Form der Fernschallwelle〈/a〉〈br〉(Kühl, W.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0074.pdf"〉Die Seismizität des Südantillenbogens〈/a〉〈br〉(Tams, E.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0076.pdf"〉Eine neue württembergische Erdbebenwarte〈/a〉〈br〉(Kleinschmidt, E.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0077.pdf"〉Über den Zusammenhang zwischen Typhusmorbidität (bzw. Typhusmortalität) und Niederschlagsschwankungen nebst einer Kritik der Brücknerschen Klimaperiode〈/a〉〈br〉(Wenzel Pollak, L.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0079.pdf"〉Über die Abhängikeit der Schwerkraft vom Zwischenmedium〈/a〉〈br〉(Schlomka, T.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0080.pdf"〉On the Determination of the Lunar Atmospheric Tide〈/a〉〈br〉(Chapman, S.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0081.pdf"〉Die Wärmeumsatz durch die Wärmestrahlung des Wasserdampfes in der Atmosphäre〈/a〉〈br〉(Albrecht, F.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0082.pdf"〉Ein Universal-Induktionsmagnetometer〈/a〉〈br〉(Uljanin, W.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0083.pdf"〉Der große Staubfall vom 26. bis 29. April 1928 in Südosteuropa〈/a〉〈br〉(Stenz, E.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0085.pdf"〉Ein neues Verfahren der luftelektrischen Raumladungsmessung〈/a〉〈br〉(Wigand, A., Schubert, J., Frankenberger, E.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0086.pdf"〉Kurze Erwiderung auf Vegards Bemerkungen über sonnenbelichtete Nordlichtstrahlen〈/a〉〈br〉(Störmer, C.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0088.pdf"〉Die Invariabilität und Abstimmung von Minimumpendeln〈/a〉〈br〉(Kohlschütter, E.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0089.pdf"〉Bemerkung zu der Arbeit "Die Invariabilität und Abstimmung von Minimumpendeln" von E. Kohlschütter〈/a〉〈br〉(Meisser, O.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0090.pdf"〉Erwiderung〈/a〉〈br〉(Kohlschütter, E.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0091.pdf"〉Bemerkungen zu der Arbeit von Herrn Dr. O. Meisser: "Ein neuer Vierpendelapparat für relative Schweremessungen"〈/a〉〈br〉(Heiland, C.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0092.pdf"〉Bemerkungen zu den vorstehenden Ausführungen von Herrn Prof. Dr. C. A. Heiland〈/a〉〈br〉(Meisser, O.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0093.pdf"〉Das Epizentrum des südatlantischen Großbebens vom 27. Juni 1929〈/a〉〈br〉(Tams, E.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0094.pdf"〉Seismische Untersuchungen auf dem Pasterzegletscher. I〈/a〉〈br〉(Brockamp, B., Mothes, H.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0096.pdf"〉Bericht über die neunte Tagung der Deutschen Geophysikalischen Gesellschaft vom 11. bis 14. September 1930 in Potsdam〈/a〉〈br〉(Mügge, Linke, F.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0097.pdf"〉Autorenverzeichnis〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0098.pdf"〉Sachverzeichnis〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0099.pdf"〉Literaturverzeichnis〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0100.pdf"〉Geophysikalische Berichte〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0101.pdf"〉Register der Geophysikalischen Berichte〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN101433392X_0006/LOG_0102.pdf"〉Mitgliederverzeichnis der Deutschen Geophysikalischen Gesellschaft nach dem Stande vom 1. Oktober 1930〈/a〉〈/li〉 〈/body〉 〈/html〉

Description: research

Description: DGG, DFG, SUB Göttingen

Description: Abstract: Current information on the potential distribution and condition of peatland soils are of great importance. This applies notably for actions with respect to climate and environmental protection. The Ministry of infrastructure and agriculture in the federal state of Brandenburg (MIL) therefore initiated a project to provide a complete and updated map of peatland soils for the federal state of Brandenburg, Germany, for the year 2013. Extensive legacy data on both, areal extent of peatland soils as well as soil profile information where made digitally available in a homogeneous map and a consistent database. Approximately 7.725 sites were randomly selected from legacy soil data and currently reinvestigated to draw inference on the current condition of peatland soils. Statistically derived peatland subsidence rates at grassland sites of 0.50 cm/yr and 0.57 cm/yr at arable sites fit well with published values in comparable regions of central Europe. Our results prove the great dynamics of soil development on agriculturally used peatlands. Concerning Brandenburg, the area of peatland soils decreased from 270.000 ha in the early 20th century (Prussian geological map) to actually 163.000 ha.

Description: Zusammenfassung: Aktuelle Informationen zur Verbreitung und zum Zustand der Moorböden sind vor dem Hintergrund der geplanten Einführung von Agrarumwelt- und Klimamaßnahmen in der Landwirtschaft von besonderer Bedeutung. Das Ministerium für Infrastruktur und Landwirtschaft des Landes Brandenburg (MIL) hat hierzu das Projekt „Schaffung einer Datengrundlage für die Ableitung von Agrarumwelt- und Klimamaßnahmen auf Moorstandorten in Brandenburg“ initiiert. Mit dem Ziel der Bereitstellung einer auf das Jahr 2013 bezogenen Moorkarte wurden umfangreiche, bis dato nicht genutzte Datenbestände zur Verbreitung von Moorböden in Brandenburg zu einer überschneidungsfreien Karte und umfassenden Datenbank moorbodenkundlicher Bodenprofile verarbeitet. Um den aktuellen Zustand der Moorböden zu erfassen, wurden flächenrepräsentativ und zufällig an 7.725 Standorten mit ausreichender Datenbasis erneut bodenkundliche Erhebungen durchgeführt und statistisch ausgewertet. Im Ergebnis konnten Mächtigkeitsverlustraten für landwirtschaftlich genutzte Moorstandorte in Brandenburg abgeleitet werden. Für flachgründige Niedermoorstandorte unter Grünland liegen sie bei 0,50 cm/a, vergleichbare ackerbaulich genutzte Standorte liegen mit 0,57 cm/a darüber. Dies deckt sich gut mit publizierten Werten an vergleichbaren Standorten in Zentraleuropa. Die Fläche der Moorböden in Brandenburg hat sich von Anfang des 20. Jahrhunderts von 270.000 ha, ausgewiesen auf Basis der Preußisch geologisch-agronomische Karte (PGK), auf heute noch 163.000 ha reduziert.

Description: DFG, SUB Göttingen, DGMT

Description: research

Description: Abstract: Peatlands are intensively exchanging greenhouse gases with the free atmosphere. Natural peatlands, mires, sequester carbon dioxide as carbon in the peat and emit methane. Peatlands under agriculture or forest are mostly drained and emit carbon dioxide due to peat mineralization and nitrous oxide due to fertilization and nitrogen mineralization. In order to characterize the actual situation and to evaluate measures for the reduction of greenhouse gas emissions measured values on gas exchange are needed. Within two national projects direct measurements of the greenhouse gas exchange have been conducted on a wide range of sites, covering different peatland types, land use forms and hydrological situations and using a standardized methodology. Between 2007 and 2012 22 sites have been studied in Lower Saxony over at least two years using the closed cover method. An overview on sites and results is given. Moreover, approaches to estimate the greenhouse gas emissions due to peat excavation and horticultural peat use are presented. Own emission factors and data from literature are used to estimate the contribution of peatlands and peat use to the greenhouse gas emissions of Lower Saxony. Finally measures for the reduction of greenhouse gas emissions are discussed and estimates on reduction costs are given from examples.

Description: Zusammenfassung: Moore stehen in einem intensiven Gasaustausch mit der Atmosphäre. Natürliche Moore haben über Jahrtausende Kohlendioxid aufgenommen und den Kohlenstoff als Torf gespeichert. Dabei haben sie Methan abgegeben. Entwässerte und genutzte Moore setzen den Kohlenstoff als Kohlendioxid wieder frei und emittieren zudem klimarelevantes Lachgas als Ergebnis der Stickstoffdüngung und der Torfmineralisation. Zur Charakterisierung der Ist-Situation und zur Beurteilung von Maßnahmen ist es erforderlich, belastbare Daten über die Treibhausgasemissionen der Moore zu haben. Im Rahmen von zwei bundesweit angelegten Verbundvorhaben wurden an einer Vielzahl von Standorten unterschiedlichen Moortyps, unterschiedlicher Nutzung und unterschiedlicher Klima- und Wasserregime mit einer abgestimmten Methodik die Flüsse der wesentlichen Treibhausgase direkt gemessen. Im Rahmen dieser Verbundvorhaben wurden in Niedersachsen zwischen 2007 und 2012 an 22 Standorten mindestens zweijährige Messungen mit der Haubentechnik vorgenommen. Dieser Beitrag gibt einen Überblick über untersuchte Standorte und Messergebnisse. Darüber hinaus werden Ansätze zur Ermittlung der Treibhausgasemissionen aus der industriellen Torfgewinnung dargestellt. Unter Verwendung eigener Ergebnisse und von Literaturdaten wird eine Abschätzung der Treibhausgasemissionen aus Moor und Torfgewinnung für das Land Niedersachsen vorgenommen. Abschließend geht der Beitrag auf Maßnahmen zur Verminderung der Treibhausgasemissionen aus Mooren sowie beispielhaft auf Emissionsminderungskosten ein.

Description: DFG, SUB Göttingen, DGMT

Description: research

Description: STÄBLEIN, G.: Regionale Geomorphologie ; KERTESZ, A.: Geomorphologische Kartierung in der Bundesrepublik Deutschland und in Ungarn. Ein Vergleich der Methodik ; BOLLMANN, I.: Geomorphologische Daten und kartographische Darstellung ; PACHUR, H.-J. & RÖPER, H.-P.: Geolimnologische Befunde des Berliner Raumes ; REMMELE, G.: Holozäne Morphodynamik an Schichtstufenhängen — Untersuchungen in Nordwest-Irland ; MÜLLER, MJ. & STRASSER, R.: Holozäne Geomorphodynamik und Landschaftsentwicklung am Ostrand der Trier-Luxemburger Mulde ; KLEBER, A.: Zur jungtertiären Reliefentwicklung im Vorland der südlichen Frankenalb ; HAMANN, C.: Windwurf als Ursache der Bodenbuckelung am Südrand des Tennengebirges, ein Beitrag zur Genese der Buckelwiesen ; ZÖLLER, L.: Neotektonik am Hunsrückrand ; SEPPÄLÄ, M.: Glazialhydrologie des Inlandeises, eine geomorphologische Interpretation der Verhältnisse in Finnland ; JÄKEL, D.: Untersuchungen und Analysen zur Entstehung der Hamada ; GARLEFF, K. & STINGL, H.: Neue Befunde zur jungquartären Vergletscherung in Cuyo und Patagonien ; STINGL, H. & GARLBFF, K.: Tertiäre und pleistozäne Reliefentwicklung an der interozeanischen Wasserscheide in Südpatagonien (Gebiet von Rio Turbio, Argentinien) ; SCHMIDT, K.H.: Nachweis junger Krustenbewegungen auf dem Colorado Plateau, USA ; KUHLE, M.: Zur Geomorphologie Tibets, Bortensander als Kennformen semiarider Vorlandvergletscherung . ; STÄBLEIN, G.: Deutscher Arbeitskreis für Geomorphologie ;

Description: research

Description: DFG, SUB Göttingen, FU Berlin

Description: Abstract: In addition to the widespread use of peatlands for agricultural purposes, which is also common in other German states, the raised bogs in Lower Saxony are still also used up to the present day for housing, as well as for industrial peat extraction. The Peatland Conservation Programme in Lower Saxony launched in 1981 therefore only covered raised bogs to disentangle the different uses, and to systematise the nature protection activities in raised bogs. The priority areas for the extraction of peat defined in the Federal State Regional Planning Programme are to be rescinded. The new State Development Programme being formulated will not only include the nature conservation of peatlands, but also for the first time, deal with the climate protection afforded by these very important storage areas for carbon. An important aspect in this regard is the incorporation of fens, and the discharge from peatlands into underlying water bodies. The database and the conclusions which contribute to the implementation of climate protection in peatland conservation programmes, will be discussed and compared with the peatland conservation previously implemented pursuant to the Peatland Conservation Programme in Lower Saxony. An overview describes various approaches for peatland and climate protection implemented by private initiatives, nature conservation societies, EU-Life-Projects, contractual nature protection, publicly owned businesses and authorities in Lower Saxony, research projects on alternative uses, and climate certificate trading. These varied instruments are compared to highlight their relative areal effectiveness, and relevance, followed by an estimate of the potential for future peatland and climate protection in Lower Saxony.

Description: Zusammenfassung: Neben der auch in anderen Bundesländern weit verbreiteten landwirtschaftlichen Nutzung von Mooren werden die niedersächsischen Hochmoore bis heute auch als Siedlungsraum und zur industriellen Torfgewinnung genutzt. Daher umfasste das niedersächsische Moorschutzprogramm von 1981 nur die Hochmoore, um diese verschiedenen Nutzungen zu entflechten und den Naturschutz in Hochmooren zu systematisieren. Die bisher im Landesraumordnungsprogramm ausgewiesenen Vorranggebiete für die Rohstoffgewinnung von Torf sollen gestrichen werden. In ein neu aufzustellendes Landesentwicklungsprogramm soll neben dem Naturschutz von Mooren erstmalig auch der Klimaschutz dieser wichtigen Kohlenstoffspeicher eingehen. Von besonderer Bedeutung sind hierbei die Einbeziehung der Niedermoore und der Stoffaustrag aus Mooren in unterliegende Gewässer. Die Datengrundlagen und Schlussfolgerungen, die zur Implementierung des Klimaschutzes in den Moorschutz beitragen, werden diskutiert und mit dem bisher umgesetzten Moorschutz nach dem niedersächsischen Moorschutzprogramm verglichen. Ein Überblick beschreibt verschiedene Ansätze zum Moor- und Klimaschutz von Privatinitiativen, von Naturschutzverbänden, mit EU-Life-Projekten, im Vertragsnaturschutz, von niedersächsischen Landesbetrieben und Behörden, von Forschungsprojekten zu alternativen Nutzungen und beim Handel mit Klima-Zertifikaten. Diese unterschiedlichen Instrumente werden in ihrer Flächenwirksamkeit und Relevanz in Beziehung gesetzt und das Potenzial für den künftigen Moor- und Klimaschutz in Niedersachsen abgeschätzt.

Description: DFG, SUB Göttingen, DGMT

Description: research

Description: Simulationen mithilfe des Models 4C zu möglichen Auswirkungen der Klimaänderungen des RCP 8.5 Klimaszenariums auf Wälder in Deutschland Kiefer Fichte Eiche Buche KATASTER-BESCHREIBUNG: Auswirkungen des Klimawandels (Temperatur, Niederschlag, CO2-Gehalt der Atmosphäre) auf die Wälder KATASTER-DETAIL: Delta T (Frühjahr) + und Delta Nied (Frühjahr) -, dann Produktivität der Wälder -; Delta C02 + um 25 - 30 %, dann Produktion der Wälder + um 9 - 20%; Delta T + (an nicht wasserlimitierten Standorten), dann Produktivität der Wälder +; Delta CO2+, dann Wassernutzungseffizienz der Wälder +; Delta T (Sommer) +, dann Waldbrandgefahr +; Delta T (Sommer) + und Delta Nied (Sommer) - (= WaBi -), dann Trockenstress der Wälder + um bis zu 9% und dann Produktivität der Wälder -; Delta T (Sommer) + und Delta Nied (Sommer) -, dann Populationsdichte Kiefern-Großschädlinge +;

Description: Übersicht über bisherige, dokumentiere Zusammenhänge einer Klimaänderung und pilzliche Krankheiten in Raps, Abschätzungen über das Auftreten von Verticillium longisporum, Sclerotinia sclerotiorum, Alternaria brassicae und Phoma lingam an Raps in der Zukunft KATASTER-BESCHREIBUNG: Projektionen über das Auftreten von pilzlichen Pathogenen in Raps, Basiszeitraum 1971-2000, Szenario A1B, REMO, 2001-2030 und 2071-2100, Zusammenhang zwischen Grad-Tagen(〉0°C), Pflanzenentwicklung und Krankheitsparametern als Regressionsfunktionen im Artikel, jedoch sind feiner aufgelöste Projektion von RCM als Tageswerte erforderlich, um Wachstumszyklen zu simulieren und genauere Aussagen zu erhalten KATASTER-DETAIL: Delta T +, dann Zunahme von Verticillium longisporum, Sclerotinia sclerotiorum, Alternaria brassicae und Phoma lingam an Raps, Signal verstärkt im Szenarienzeitraum 2071-2100, Abnahme von Pyrenopeziza brassicae

Description: Simulierte und beobachtete Trends der jährlichen Hochwassermaxima KATASTER-BESCHREIBUNG: Trend der Zu- bzw. Abnahme der Andauer der jährlichen Hochwassermaxima in Deutschland für die Vergangenheit KATASTER-DETAIL: Abnahme des mittleren jährlichen Abflusses um 35 % in Baden-Württemberg (Pegel Achstetten/Baierzer Rot) bzw. 21 % in Brandenburg (Pegel Ketzin/Havel) Zunahme des mittleren jährlichen Abflusses um 84 % in Bayern (Pegel Breitenbachkamm/Breitach) bzw. 74 % in Bayern (Pegel Kalteneck/Ilz)

Description: Kalkulation der Hitzetage (Tmax 〉 30°C) anhand es PIK/DWD Datensatzes für 1951-2006 im Jahr, und für den Zeitraum 2051-60, Szenario A1B, als Mittel und Differenzkarten KATASTER-BESCHREIBUNG: Hitzetage (Tmax 〉 30°C) in Deutschland KATASTER-DETAIL: Zunahme der Hitzetage (Tmax 〉 30°C) 2051-2060 vs. 1951-2006 um bis zu 16 Tagen im Jahr, stärkste Zunahme Rheingragben, Rheinland-Pfalz, Niederrhein, Kölner Bucht und Mitteldeutschland

Description: Kalkulation der Klimatischen Wasserbilanz (mm) anhand es PIK/DWD Datensatzes für 1951-2006 im Jahr, und für den Zeitraum 2051-60, Szenario A1B, als Mittel und Differenzkarten KATASTER-BESCHREIBUNG: Jährliche Klimatischen Wasserbilanz WABI (Niederschlag - pot. Verdunstung nach Turc-Ivanov) für Deutschland KATASTER-DETAIL: Zu- bzw. Abnahme der (WABI) 2051-2060 vs. 1951-2006 von 200 - (-100) im Westen der BRD, in Ostdeutschland stärkere, einheitliche Abnahme der WABI um bis zu 300mmm

Description: Beispiele Ambrosia, Eichenprozessionsspinner KATASTER-BESCHREIBUNG: KATASTER-DETAIL:

Description: ausgedehnte Ambrosiaareale auch in der Lausitz und dem Berliner Raum KATASTER-BESCHREIBUNG: Neben Sensibilisierung gegen Ambrosia auch Kreuzreationen bei Sensibilisierung gegen Beifuß möglich KATASTER-DETAIL:

Description: einheimische und importierte  vektorassoziierte  Infektionen, Gastrointestinale  Infektionskrankheiten KATASTER-BESCHREIBUNG: KATASTER-DETAIL:

Description: weltweite Verbreitung der Asiatischen Tigermücke Aedes albopictus innerhalb der letzten zwei Jahrzehnte im Zusammenhang mit Chikungunya-Ausbruch im Sommer 2007 in Italien KATASTER-BESCHREIBUNG: Transportwege der Globalisierung als wesentlicher Faktor neben Klimaänderungen KATASTER-DETAIL:

Description: Gesundheitliche Bewertung ultravioletter Strahlung KATASTER-BESCHREIBUNG: KATASTER-DETAIL:

Description: Klärung der Studienlage zum potentiellen Einfluss des Klimawandels auf die Prävalenz von Haut- und Allergieerkrankungen in Deutschland KATASTER-BESCHREIBUNG: klimabedingte Veränderungen vor allem bei allergischen Erkrankungen, Hautkrebs und einzelnen erregerbedingten Dermatosen KATASTER-DETAIL:

Description: Fallbeispiel Sommer 2003 KATASTER-BESCHREIBUNG: Zunahme von Ozon in der Troposphäre bei stationären sommerlichen Hochdruckwetterlagen mit hohen Lufttemperaturen und intensiver Sonneneinstrahlung, indirekt Zunahme von Feinstaub bei Hitze (〉30°C) und Ozonbelastung (〉200 Mikrogramm pro Kubikmeter) KATASTER-DETAIL:

Description: UV-Strahlungsbeeinflussende Faktoren Azimutwinkel, Bewölkung, Aerosole, stratosphärisches Ozon, biologische Wirkung in Abhängigkeit vom Hauttyp und Sensibilisierung (Jahreszeit) KATASTER-BESCHREIBUNG: Einfluss klimatischer Veränderungen auf die Häufigkeit von Hautkrebserkrankungen sehr wahrscheinlich, bei vermutlich hoher Bedeutung des (thermisch motivierten) Expositionsverhaltens KATASTER-DETAIL:

Description: zeitliche Trends und geografische Ursprünge der Vektor-übertragenen Krankheiten in Deutschland im Hinblick auf Stärken der bestehenden Krankheitsüberwachung für Hantavirus Infektion (endemisch in Deutschland), Chikungunya-Fieber (vor kurzem Schwellenländer in Europa) und Dengue-Fieber (importiert aus tropischen Regionen) KATASTER-BESCHREIBUNG: KATASTER-DETAIL:

Description: Studie zu einer prognostizierten Anzahl von Tagen mit Wärme- und mit Kältestress, basierend auf Klimaszenarien für den Zeitraum 2071 bis 2100 KATASTER-BESCHREIBUNG: schätzungsweise durchschnittlicher Anstieg der Zahl der wärmeinduzierten Krankheitsfälle um einen Faktor von mehr als 3 und für hitzebedingte Krankenhausaufenthalte 6, Verlust von 0,1% bis 0.5% des BIP durch krankheitbedingten Arbeitsausfall KATASTER-DETAIL:

Description: Pollensaison, -auftreten und -arten, sowie Veränderungen der Allergenität von Pollen unter Klimawandel KATASTER-BESCHREIBUNG: zunehmende Polysensibilisierungen gegenüber Inhalationsallergien durch zunehmend invasives Traubenkraut Ambrosia artemisiifolia KATASTER-DETAIL:

Description: Studie zu einer prognostizierten Anzahl von Tagen mit Wärme- und mit Kältestress, basierend auf Klimaszenarien für den Zeitraum 2071 bis 2100 KATASTER-BESCHREIBUNG: Prognose: größere Zahl an Todesfällen durch Hitze im Süden gegenüber dem Norden Deutschlands und zugleich größerer Rückgang der Todesfälle durch Kälte im Norden, Anstieg der Todesopferzahl durch zunehmende Hitze insgesamt größer als Rückgang der Opferzahl durch weniger Kälte KATASTER-DETAIL:

Description: Autochthone Malaria in Deutschland, Historischer Abriss, Nachkriegsmalaria, Aktuelle malariaepidemiologische Situation KATASTER-BESCHREIBUNG: klimatische Bedingungen ermöglichen Ausreifung von Sporozoiten in heimischen Anophelesmücken, historisch erwiesen KATASTER-DETAIL:

Description: Herleitung einer Formel zur Berechnung der Plasmodium-Sporozoitenreifungszeit KATASTER-BESCHREIBUNG: Ausreifung von Pl. vivax- und Pl. falciparum-Sporozoiten im deutschen Raum möglich, Zustandekommen endemischer Malariaerregerübertragung bzw. Entstehung epidemiologisch wirksamer malariogener Potentiale dabei gebunden an das Vorhandensein von Gametozytenträgern und Überträgermücken KATASTER-DETAIL:

Description: Erfassung aller tatsächlichen oder vermuteten vektorassoziierten Krankheiten und Vektoren KATASTER-BESCHREIBUNG: viele Pathogene in Deutschland bereits vorhanden bzw. geeignete Vektoren stehen zur Verfügung, bei Einschleppung durch Reservoirwirte oder erkrankte Reisende sind autochthone Fälle zu erwarten KATASTER-DETAIL:

Description: deutliche Verschiebungen der phänologischen Jahreszeiten, besonders der Frühjahrsphasen; für jede phänologische Phase negative und auch positive Trends entdeckt, z.T. auf engen Raum; Verschiebung auf Variation der Lufttemperatur zurückzuführen; Verlängerung der Vegetationsperiode, hauptsächlich durch Veränderungen im Frühjahr KATASTER-BESCHREIBUNG: KATASTER-DETAIL:

Description: Abnahme des thermischen Einflusses auf den saisonalen Verlauf der Mortalität KATASTER-BESCHREIBUNG: sich verbessernde Bedingungen im Gesundheitswesen und bei der Innenraumtemperatur bedingen Abnahme des thermischen Einflusses insb. für Mortalitätszunahme bei niedrigen Temperaturen KATASTER-DETAIL:

Description: Low temperature Zn diffusion in GaSb, where the minimum temperature was 450 C, was studied. The pseudo-closed box (PCB) method was used for Zn diffusion into GaAs, AlGaAs, InP, InGaAs and InGaAsP. The PCB method avoids the inconvenience of sealed ampoules and proved to be simple and reproducible. The special design of the boat for Zn diffusion ensured the uniformality of Zn vapor pressure across the wafer surface, and thus the uniformity of the p-GaSb layer depth. The p-GaSb layers were studied using Raman scattering spectroscopy and the x-ray rocking curve method. As for the postdiffusion processing, an anodic oxidation was used for a precise thinning of the diffused GaSb layers. The results show the applicability of the PCB method for the large-scale production of the GaSb structures for solar cells.

Description: Indium phosphide is considered to be a strong contender for many photovoltaic space applications because of its radiation resistance and its potential for high efficiency. An overview of recent progress is presented, and possible future research directions for indium phosphide space solar cells are discussed. The topics considered include radiation damage studies and space flight experiments.

Description: Understanding solar cell response to pulsed laser outputs is important for the evaluation of power beaming applications. The time response of high efficiency GaAs and silicon solar cells to a 25 nS monochromatic pulse input is described. The PC-1D computer code is used to analyze the cell current during and after the pulse for various conditions.

Description: Four-terminal mechanically stacked solar cells were developed for advanced space arrays with line-focus reflective concentrators. The top cells are based on AlGaAs/GaAs multilayer heterostructures prepared by low temperature liquid phase epitaxy. The bottom cells are based on heteroepitaxial InP/InGaAs liquid phase epitaxy or on homo-junction GaSb, Zn-diffused structures. The sum of the highest reached efficiencies of the top and bottom cells is 29.4 percent. The best four-terminal tandems have an efficiency of 27 to 28 percent. Solar cells were irradiated with 1 MeV electrons and their performances were determined as a function of fluence up to 10(exp 16) cm(exp-2). It was shown that the radiation resistance of developed tandem cells is similar to the most radiative stable AlGaAs/GaAs cells with a thin p-GaAs photoactive layer.

Description: An investigation of solar cells based on AlGaAs/GaAs heterostructures with an internal Bragg reflector as the back-surface reflector is presented. The Bragg reflector is grown by low pressure metalorganic chemical vapor deposition on n-GaAs substrates in a horizontal resistively heated reactor. The Bragg reflector with its maximum reflectance centered at a wavelength of 860 nm consists of 12 pairs of AlAs/GaAs layers. The resulting Bragg reflector has a thickness of 0.072 micrometers for AlAs and 0.059 micrometers for GaAs. The multi-layered quasi-dielectric stack selectively reflects weakly absorbed photons with energies near to the GaAs band gap for a second pass through the photoactive region, thus increasing the photocurrent. The use of the Bragg reflector allows the external quantum efficiency to be increased in the long wavelength of the spectrum. The use of the Bragg reflector and an antireflective coating and prismatic cover allowed an efficiency of 23.4 percent to be obtained.

Description: The high efficiency solar cells based on multilayer AlGaAs/GaAs heterostructures, prepared by low temperature liquid phase epitaxy (LPE), were developed and tested. An investigation of the low temperature LPE process for the crystallization of AlGaAs heterostructures of as high as 24.0 to 24.7 percent under AMO conditions at concentration ratios of 20 to 100x, were reached. Developed solar cells show substantial radiation resistance to the damage induced by 3.75 MeV electrons.

Description: The Thermal Energy Storage-1 (TES-1) is a flight experiment that flew on the Space Shuttle Columbia (STS-62), in March 1994, as part of the OAST-2 mission. TES-1 is the first experiment in a four experiment suite designed to provide data for understanding the long duration microgravity behavior of thermal energy storage fluoride salts that undergo repeated melting and freezing. Such data have never been obtained before and have direct application for the development of space-based solar dynamic (SD) power systems. These power systems will store solar energy in a thermal energy salt such as lithium fluoride or calcium fluoride. The stored energy is extracted during the shade portion of the orbit. This enables the solar dynamic power system to provide constant electrical power over the entire orbit. Analytical computer codes have been developed for predicting performance of a spaced-based solar dynamic power system. Experimental verification of the analytical predictions is needed prior to using the analytical results for future space power design applications. The four TES flight experiments will be used to obtain the needed experimental data. This paper will focus on the flight results from the first experiment, TES-1, in comparison to the predicted results from the Thermal Energy Storage Simulation (TESSIM) analytical computer code. The TES-1 conceptual development, hardware design, final development, and system verification testing were accomplished at the NASA lewis Research Center (LeRC). TES-1 was developed under the In-Space Technology Experiment Program (IN-STEP), which sponsors NASA, industry, and university flight experiments designed to enable and enhance space flight technology. The IN-STEP Program is sponsored by the Office of Space Access and Technology (OSAT).

Description: This paper describes the engineering thought process behind the failure analysis, redesign, and rework of the flight hardware for the Brilliant Eyes Thermal Storage Unit (BETSU) experiment. This experiment was designed to study the zero-g performance of 2-methylpentane as a suitable phase change material. This hydrocarbon served as the cryogenic storage medium for the BETSU experiment which was flown 04 Mar 94 on board Shuttle STS-62. Ground testing had indicated satisfactory performance of the BETSU at the 120 Kelvin design temperature. However, questions remained as to the micro-gravity performance of this unit; potential deviations in ground (1 g) versus space flight (0 g) performance, and how the unit would operate in a realistic space environment undergoing cyclical operation. The preparations and rework performed on the BETSU unit, which failed initial flight qualification, give insight and lessons learned to successfully develop and qualify a space flight experiment.

Description: The Solar Array Module Plasma Interactions Experiment (SAMPIE) is a flight experiment that flew on the Space Shuttle Columbia (STS-62) in March 1994, as part of the OAST-2 mission. The overall objective of SAMPIE was to determine the adverse environmental interactions within the space plasma of low earth orbit (LEO) on modern solar cells and space power system materials which are artificially biased to high positive and negative direct current (DC) voltages. The two environmental interactions of interest included high voltage arcing from the samples to the space plasma and parasitic current losses. High voltage arcing can cause physical damage to power system materials and shorten expected hardware life. parasitic current losses can reduce power system efficiency because electric currents generated in a power system drain into the surrounding plasma via parasitic resistance. The flight electronics included two programmable high voltage DC power supplies to bias the experiment samples, instruments to measure the surrounding plasma environment in the STS cargo bay, and the on-board data acquisition system (DAS). The DAS provided in-flight experiment control, data storage, and communications through the Goddard Space Flight Center (GSFC) Hitchhiker flight avionics to the GSFC Payload Operations Control Center (POCC). The DAS and the SAMPIE POCC computer systems were designed for telescience operations; this paper will focus on the experiences of the SAMPIE team regarding telescience development and operations from the GSFC POCC during STS-62. The SAMPIE conceptual development, hardware design, and system verification testing were accomplished at the NASA Lewis Research Center (LeRC). SAMPIE was developed under the In-Space Technology Experiment Program (IN-STEP), which sponsors NASA, industry, and university flight experiments designed to enable and enhance space flight technology. The IN-STEP Program is sponsored by the Office of Space Access and Technology (OSAT).

Description: AstroPower is developing InGaAsSb thermophotovoltaic (TPV) devices. This photovoltaic cell is a two-layer epitaxial InGaAsSb structure formed by liquid-phase epitaxy on a GaSb substrate. The (direct) bandgap of the In(1 - x)Ga(x)As(1 -y)Sb(y) alloy is 0.50 to 0.55 eV, depending on its exact alloy composition (x, y); and is closely lattice-matched to the GaSb substrate The use of the quaternary alloy, as opposed to a ternary alloy - such as, for example, InGaAs/InP - permits low bandgap devices optimized for 1000 to 1500 C thermal sources with, with at the time, near-exact lattice matching to the GaSb substrate. Lattice-matching is important since even a small degree of lattice mismatch degrades device performance and reliability and increases processing complexity. For bandgaps of 0.52 eV,Fo internal quantum efficiencies as high as 95% have been measured at a wavelength of 2 microns. At 1 micron wavelengths, internal quantum efficiencies of 55% have been observed. The open-circuit voltage at currents of 0.3 A/sq cm is 0.220 volts and 0.260 V for current densities of 2 A/sq cm. Fill factors of 56% have also been measured. These preliminary results lead to the conclusion that the GaSb-based quaternary compounds provide a viable and high performance energy conversion solution for thermophotovoltaic systems operating with 1000 to 1500 C source temperatures.

Description: InP p(+)nn(+) MOCVD solar cells were irradiated with 0.2 MeV and 10 MeV protons to a fluence of 10(exp 13)/sq cm. The degradation of power output, IV behavior, carrier concentration and defect concentration were observed at intermediate points throughout the irradiations. The 0.2 MeV proton irradiated solar cells suffered much greater and more rapid degradation in power output than those irradiated with 10 meV protons. The efficiency losses were accompanied by larger increases in the recombination currents in the 0.2 MeV proton irradiated solar cells. The low energy proton irradiations also had a larger impact on the series resistance of the solar cells. Despite the radiation induced damage, the carrier concentration in the base of the solar cells showed no reduction after 10 MeV or 0.2 MeV proton irradiations and even increased during irradiation with 0.2 MeV protons. In a DLTS study of the irradiated samples, the minority carrier defects H4 and H5 at E(v) + 0.33 and E(v) + 0.52 eV and the majority carrier defects E7 and E10 at E(c)- 0.39 and E(c)-0.74 eV, were observed. The defect introduction rates for the 0.2 MeV proton irradiations were about 20 times higher than for the 10 MeV proton irradiations. The defect E10, observed here after irradiation, has been shown to act as a donor in irradiated n-type InP and may be responsible for obscuring carrier removal. The results of this study are consistent with the much greater damage produced by low energy protons whose limited range causes them to stop in the active region of the solar cell.

Description: High voltage power systems in space will interact with the space plasma in a variety of ways. One of these, snapover, is characterized by sudden enlargement of the current collection area across normally insulating surfaces generating enhanced electron current collection. Power drain on solar array power systems results from this enhanced current collection. Optical observations of the snapover phenomena in the laboratory indicates a functional relation between glow area and bia potential as a consequence of the fold/cusp bifurcation in chaos theory. Successful characterizations of snapover as a chaotic phenomena may provide a means of snapover prevention and control through chaotic synchronization.

Description: The PASP-Plus (Photovoltaic Array Space Power Plus Diagnostics) program is a photovoltaic experiment which is flying on the Air Force satellite APEX (Advanced Photovoltaic and Electronics Experiments). The satellite was launched on August 3, 1994 with a Pegasus low-cost launch vehicle. There are two other small experiments on APEX, however PASP-Plus is the largest, uses the most power, and accounts for the largest portion of the data requirements. The satellite is in an elliptical orbit with an apogee of 2552 km and a perigee of 363 km. The inclination is 70 degrees. The PASP-Plus experiment consists of twelve photovoltaic panels containing a total of sixteen separate cell modules. Two of the modules are concentrator modules, while the rest are planar. There are several different solar cell types flying on PASP-Plus including silicon, GaAs on germanium substrates, InP, amorphous silicon, and three multi-bandgap cells. The purpose of this paper is to present some of the data from the first year of the PASP-Plus flight. Cell performance and module thermal performance will be discussed as well as other relevant data.

Description: The Astro Edge solar array is a new and innovative reflective low concentrator power generating system which has been selected for the CTA Incorporate/Lockheed Martin Clark spacecraft under the NASA Small Spacecraft Technology Initiative (SSTI) program. In support of this program, Astro Aerospace Corporation has produced one qualification and two flight solar array wings to support a July 1996 launch. The Astro Edge solar array was selected as a new technology to benefit future NASA, military and commercial missions by providing high specific power, high deployed stiffness, low stowed volume, low risk, and cost reduction features which meet the agency's 'better, faster, cheaper' goals. This novel array accounts for five of the thirty-six advanced technologies which the Clark spacecraft will demonstrate. A brief SSTI Astro Edge solar array program overview is presented. Completed qualification and acceptance testing is discussed. Finally, the major discriminators which make the Astro Edge solar array 'better, faster, cheaper' technology are provided.

Description: Gallium phosphide (GaP) energy converters may be successfully deployed to provide new mission capabilities for spacecraft. Betavoltaic power supplies based on the conversion of tritium beta decay to electricity using GaP energy converters can supply long term low-level power with high reliability. High temperature solar cells, also based on GaP, can be used in inward-bound missions greatly reducing the need for thermal dissipation. Results are presented for GaP direct conversion devices powered by Ni-63 and compared to the conversion of light emitted by tritiarated phosphors. Leakage currents as low as 1.2 x 10(exp -17) A/sq cm have been measured and the temperature dependence of the reverse saturation current is found to have ideal behavior. Temperature dependent IV, QE, R(sub sh), and V(sub oc) results are also presented. These data are used to predict the high-temperature solar cell and betacell performance of GaP devices and suggest appropriate applications for the deployment of this technology.

Description: Literature on solar array angle of incidence corrections was found to be sparse and contained no tabular data for support. This lack along with recent data on 27 GaAs/Ge 4 cm by 4 cm cells initiated the analysis presented in this paper. The literature cites seven possible contributors to angle of incidence effects: cosine, optical front surface, edge, shadowing, UV degradation, particulate soiling, and background color. Only the first three are covered in this paper due to lack of sufficient data. The cosine correction is commonly used but is not sufficient when the incident angle is large. Fresnel reflection calculations require knowledge of the index of refraction of the coverglass front surface. The absolute index of refraction for the coverglass front surface was not known nor was it measured due to lack of funds. However, a value for the index of refraction was obtained by examining how the prediction errors varied with different assumed indices and selecting the best fit to the set of measured values. Corrections using front surface Fresnel reflection along with the cosine correction give very good predictive results when compared to measured data, except there is a definite trend away from predicted values at the larger incident angles. This trend could be related to edge effects and is illustrated by a use of a box plot of the errors and by plotting the deviation of the mean against incidence angle. The trend is for larger deviations at larger incidence angles and there may be a fourth order effect involved in the trend. A chi-squared test was used to determine if the measurement errors were normally distributed. At 10 degrees the chi-squared test failed, probably due to the very small numbers involved or a bias from the measurement procedure. All other angles showed a good fit to the normal distribution with increasing goodness-of-fit as the angles increased which reinforces the very small numbers hypothesis. The contributed data only went to 65 degrees from normal which prevented any firm conclusions about extreme angle effects although a trend in the right direction was seen. Measurement errors were estimated and found to be consistent with the conclusions that were drawn. A controlled experiment using coverglasses and cells from the same lots and extending to larger incidence angles would probably lead to further insight into the subject area.

Description: Past NASA missions to Mars, Jupiter, and the outer planets were powered by radioisotope thermal generators (RTG's). Although these devices proved to be reliable, their high cost and highly toxic radioactive heat source has made them far less desirable for future planetary missions. This has resulted in a renewed search for alternate energy sources, some of them being photovoltaic (PV) and thermophotovoltaic (TPV). Both of these alternate energy sources convert light/thermal energy directly into electricity. In order to create a viable PV and TPV data base for planetary mission planners and cell designers, we have compiled low temperature low intensity (LILT) I-V data on single junction and multi-junction high efficiency solar cells. The cells tested here represent the latest photovoltaic technology. Using this LILT data to calculate dI(sub SC)/dT, dV(sub OC)/dT, dFF/dT, and also as a function of intensity, an accurate prediction of cell performance under the AMO spectrum can be determined. When combined with QUantum efficiency at Low Temperature (QULT) data, one can further enhance the data by adding spectral variations to the measurements. This paper presents an overview of LILT measurements and is only intended to be used as a guideline for material selection and performance predictions. As single junction and multi-junction cell technologies emerge, new test data must be collected. Cell materials included are Si, GaAs/Ge, GainP/GaAs/Ge, InP, InGaAs/InP, InP/InGaAs/InP, and GainP. Temperatures range as low as -175 C and intensities range from 1 sun to .02 suns.

Description: When determining the best solar cell technology for a particular space flight mission, accurate prediction of solar cell performance in a space radiation environment is essential. The current methodology used to make such predictions requires extensive experimental data measured under both electron and proton irradiation. Due to the rising cost of accelerators and irradiation facilities, such extensive data sets are expensive to obtain. Moreover, with the rapid development of novel cell designs, the necessary data are often not available. Therefore, a method for predicting cell degradation based on limited data is needed. Such a method has been developed at the Naval Research Laboratory based on damage correlation using 'displacement damage dose' which is the product of the non-ionizing energy loss (NIEL) and the particle fluence. Displacement damage dose is a direct analog of the ionization dose used to correlate the effects of ionizing radiations. In this method, the performance of a solar cell in a complex radiation environment can be predicted from data on a single proton energy and two electron energies, or one proton energy, one electron energy, and Co(exp 60) gammas. This method has been used to accurately predict the extensive data set measured by Anspaugh on GaAs/Ge solar cells under a wide range of electron and proton energies. In this paper, the method is applied to InP solar cells using data measured under 1 MeV electron and 3 MeV proton irradiations, and the calculations are shown to agree well with the measured data. In addition to providing accurate damage predictions, this method also provides a basis for quantitative comparisons of the performance of different cell technologies. The performance of the present InP cells is compared to that published for GaAs/Ge cells. The results show InP to be inherently more resistant to displacement energy deposition than GaAs/Ge.

Description: Advanced materials play an important role in electrochemical energy devices such as batteries, fuel cells, and electrochemical capacitors. They are being used as both electrodes and electrolytes. Sol-gel processing is a versatile solution technique used in fabrication of ceramic materials with tailored stoichiometry, microstructure, and properties. The application of sol-gel processing in the fabrication of advanced electrochemical energy materials will be presented. The potentials of sol-gel derived materials for electrochemical energy applications will be discussed along with some examples of successful applications. Sol-gel derived metal oxide electrode materials such as V2O5 cathodes have been demonstrated in solid-slate thin film batteries; solid electrolytes materials such as beta-alumina for advanced secondary batteries had been prepared by the sol-gel technique long time ago; and high surface area transition metal compounds for capacitive energy storage applications can also be synthesized with this method.

Description: The experimental performance of a multijunction monolithic In(0.53)Ga(0. 47)As power converter under blackbody irradiation is reported. Eight InGaAs PN junctions grown epitaxially on a semi-insulating wafer were monolithically integrated in series to boost the approximately 0.4 V photovoltage per typical InGaAs junction to over 3 volts for the 1 sq cm chip. This chip was originally designed and characterized for free-space 1.3 micron laser power beaming. This is the first report of such a multijunction TPV. This is not a traditional tandem cell in which the junctions are stacked vertically. The junctions are each about 1mm long by 1 cm wide and are laterally connected across the 1 sq cm device area. This multijunction design has the potential for lower I(sup 2)R power loss since the smaller PN junction area limits the current to one-eighth that of the equivalent surface area. In essence, the current is traded for voltage to avoid the I(sup 2)R loss, analogous to the way power utilities avoid I(sup 2)P loss in high-tension power lines, by transforming the high current, low voltage generated at a power plant into a high voltage at a low current before transmitting the power over great distances.

Description: Progress is reported with respect to the development of ultra-lightweight, high performance, thin, light trapped GaAs solar cells for advanced space power systems. Conversion efficiencies of over 17.7% have been demonstrated for a 3 micron thick, 1 sq cm silicone bonded solar cell. This results in a specific power of over 1020 W/kg. Device parameters were 1.011 V open circuit voltage, 80% fill factor, and a short-circuit current density of 29.5 mA/sq cm . In addition to silicone bonding, the use of electrostatic bonding to attach the coverglass support to the front surface enables an ultra-thin, all back contact design that survives processing temperatures greater than 750 C. This also results in a 10% reduction of the cell weight for a potential specific power of 1270 W/kg. All back contact, ultra-thin, electrostatically bonded GaAs solar cell prototypes have been completed demonstrating an open circuit voltage of 1 volt for a cell base thickness of 1 micron with a 0.5 micron emitter. This technology will result in a revolutionary improvement in survivability, performance, and manufacturability of lightweight GaAs solar cell products for future Earth-orbiting science and space exploration missions. The thin, electrostatically bonded, all back contact GaAs device technology has multiple uses for specialty high performance solar cells and other optoelectronic devices.

Description: Multi-junction solar cells are attractive for space applications because they can be designed to convert a larger fraction of AMO into electrical power at a lower cost than single-junction cells. The performance of multi-junction cells is much more sensitive to the spectral irradiance of the illuminating source than single-junction cells. The design of high efficiency multi-junction cells for space applications requires matching the optoelectronic properties of the junctions to AMO spectral irradiance. Unlike single-junction cells, it is not possible to carry out quantum efficiency measurements using only a monochromatic probe beam and determining the cell short-circuit current assuming linearity of the quantum efficiency. Additionally, current-voltage characteristics can not be calculated from measurements under non-AMO light sources using spectral-correction methods. There are reports in the literature on characterizing the performance of multi junction cells by measuring and convoluting the quantum efficiency of each junction with the spectral irradiance; the technique is of limited value for the characterization of cell performance under AMO power-generating conditions. We report the results of research to develop instrumentation and techniques for characterizing multi junction solar cells for space . An integrated system is described which consists of a standard lamp, spectral radiometer, dual-source solar simulator, and personal computer based current-voltage and quantum efficiency equipment. The spectral radiometer is calibrated regularly using the tungsten-halogen standard lamp which has a calibration based on NIST scales. The solar simulator produces the light bias beam for current-voltage and cell quantum efficiency measurements. The calibrated spectral radiometer is used to 'fit' the spectral irradiance of the dual-source solar simulator to WRL AMO data. The quantum efficiency apparatus includes a monochromatic probe beam for measuring the absolute cell quantum efficiency at various voltage biases, including the voltage bias corresponding to the maximum-power point under AMO light bias. The details of the procedures to 'fit' the spectral irradiance to AMO will be discussed. An assessment of the role of the accuracy of the 'fit' of the spectral irradiance and probe beam intensity on measured cell characteristics will be presented. quantum efficiencies were measured with both spectral light bias and AMO light bias; the measurements show striking differences. Spectral irradiances were convoluted with cell quantum efficiencies to calculate cell currents as function of voltage. The calculated currents compare with measured currents at the 1% level. Measurements on a variety of multi-junction cells will be presented. The dependence of defects in junctions on cell quantum efficiencies measured under light and voltage bias conditions will be presented. Comments will be made on issues related to standards for calibration, and limitations of the instrumentation and techniques. Expeditious development of multi-junction solar cell technology for space presents challenges for cell characterization in the laboratory.

Description: It is well known that the behavior of III-V compound based solar cells is largely controlled by their surface, since the majority of light generated carriers (63% for GaAs and 79% for InP) are created within 0.2 mu m of the surface of the illuminated cell. Consequently, the always observed high surface recombination velocity (SRV) on these cells is a serious limiting factor for their high efficiency performance, especially for those with p-n junction made by either thermal diffusion or ion implantation. A good surface passivation layer, ideally a grown oxide as opposed to a deposited one, will cause a significant reduction in the SRV without adding interface problems, thus improving the performance of III-V compound based solar cells. Another significant benefit to the overall performance of the solar cells can be achieved by a substantial reduction of their large surface optical reflection by the use of a well designed antireflection (AR) coating. In this paper, we demonstrate the effectiveness of using a chemically grown thermally and chemically stable oxide, not only for surface passivation but also as an integral part of a 3-layer AR coating for thermally diffused p+n InP solar cells. A phosphorus-rich interfacial oxide, In(PO3)3, is grown at the surface of the p+ emitter using an etchant based on HNO3, o-H3PO4 and H2O2. This oxide has the unique properties of passivating the surface as well as serving as an efficient antireflective layer yielding a measured record high AMO open-circuit voltage of 890.3 mV on a thermally diffused InP(Cd,S) solar cell. Unlike conventional single layer AR coatings such as ZnS, Sb2O3, SiO or double layer AR coatings such as ZnS/MgF2 deposited by e-beam or resistive evaporation, this oxide preserves the stoichiometry of the InP surface. We show that it is possible to design a three-layer AR coating for a thermally diffused InP solar cell using the In(PO3)3 grown oxide as the first layer and Al2O3 and MgF2 as the second and third layers respectively, so as to yield an overall theoretical reflectance of less than 2%. Since chemical oxides are readily grown on III-V semiconductors materials, the technique of using the grown oxide layer to both passivate the surface as well as serve as the first of a multilayer AR coating should work well for all III-V compound-based solar cells.

Description: High-efficiency, heteroepitaxial (HE) InP solar cells, grown on GaAs, Si or Ge substrates, are desirable for their mechanically strong, light-weight and radiation-hard properties. However, dislocations, caused by lattice mismatch, currently limit the performance of the HE cells. This occurs through shunting paths across the active photovoltaic junction and by the formation of deep levels. In previous work we have demonstrated that plasma hydrogenation is an effective and stable means to passivate the electrical activity of dislocations in specially designed HE InP test structures. In this work, we present the first report of successful hydrogen passivation in actual InP cell structures grown on GaAs substrates by metalorganic chemical vapor deposition (MOCVD). We have found that a 2 hour exposure to a 13.56 MHz hydrogen plasma at 275 C reduces the deep level concentration in HE n+n InP cell structures from as-grown values of approximately 10(exp 15)/cm(exp -3), down to 1-2 x 10(exp 13)/cm(exp -3). The deep levels in the p-type base region of the cell structure match those of our earlier p-type test structures, which were attributed to dislocations or related point defect complexes. All dopants were successfully reactivated by a 400 C, 5 minute anneal with no detectable activation of deep levels. I-V analysis indicated a subsequent approximately 10 fold decrease in reverse leakage current at -1 volt reverse bias, and no change in the forward biased series resistance of the cell structure which indicates complete reactivation of the n+ emitter. Furthermore, electrochemical C-V profiling indicates greatly enhanced passivation depth, and hence hydrogen diffusion, for heteroepitaxial structures when compared with identically processed homoepitaxial n+p InP structures. An analysis of hydrogen diffusion in dislocated InP will be discussed, along with comparisons of passivation effectiveness for n+p versus p+n heteroepitaxial cell configurations. Preliminary hydrogen-passivated HE InP cell results will also be presented.

Description: The first long-term (3000 hours) UV testing of unirradiated and 1 MeV electron-irradiated GaAs solar cells, with multilayer-coated coverslides to reduce solar array operating temperature, has produced some unexpected and important results. Two results, independent of the coverslide coatings, are of particular importance in terms of the predictability of GaAs solar-array lifetime in space: ( 1) The GaAs/Ge solar cells used for this series of tests displayed a much higher radiation degradation than that predicted based on JPL Solar Cell Radiation Handbook data. Covered cells degraded more in Isc than did bare cells. Short-term illumination at 60 C did not produce significant recovery (-1%) of the radiation damage. (2) However, electron radiation damage to these GaAs solar celIs anneals at 40 C when exposed to approximately 1 sun AM0 UV light sources for extended periods. The effect appears to be roughly linear with time (-1% of lsc per 1000 UVSH), is large (greater than or equal to 3%), and has not yet saturated (at 3000 hours). This photo-recovery of radiation damage to GaAs solar cells is a new effect and potentially important to the spacecraft community. The figure compares the effects of extended UV on irradiated and unirradiated GaAs solar cells with INTELSAT-6 Si cells. The effect and its generality, the extent of and conditions for photo-recovery, and the implications of such recovery for missions in radiation environments have not yet been determined.

Description: This proprietary technology is based on AstroPower's electrostatic bonding and innovative silicon solar cell processing techniques. Electrostatic bonding allows silicon wafers to be permanently attached to a thermally matched glass superstrate and then thinned to final thicknesses less than 25 micron. These devices are based on the features of a thin, light-trapping silicon solar cell: high voltage, high current, light weight (high specific power) and high radiation resistance. Monolithic interconnection allows the fabrication costs on a per watt basis to be roughly independent of the array size, power or voltage, therefore, the cost effectiveness to manufacture solar cell arrays with output powers ranging from milliwatts up to four watts and output voltages ranging from 5 to 500 volts will be similar. This compares favorably to conventionally manufactured, commercial solar cell arrays, where handling of small parts is very labor intensive and costly. In this way, a wide variety of product specifications can be met using the same fabrication techniques. Prototype solar cells have demonstrated efficiencies greater than 11%. An open-circuit voltage of 5.4 volts, fill factor of 65%, and short-circuit current density of 28 mA/sq cm at AM1.5 illumination are typical. Future efforts are being directed to optimization of the solar cell operating characteristics as well as production processing. The monolithic approach has a number of inherent advantages, including reduced cost per interconnect and increased reliability of array connections. These features make this proprietary technology an excellent candidate for a large number of consumer products.

Description: As part of a continuing program to determine the space radiation resistance of InP/ln(0.53)Ga(0.47)As tandem solar cells, n/p In(0.53)Ga(0. 47)As solar cells fabricated by RTI were irradiated with 1 MeV electrons and with 3 MeV protons. The cells were grown with a 3 micron n-lnP window layer to mimic the top cell in the tandem cell configuration for both AMO solar absorption and radiation effects. The results have been plotted against 'displacement damage dose' which is the product of the nonionizing energy loss (NIEL) and the particle fluence. A characteristic radiation damage curve can then be obtained for predicting the effect of all particles and energies. AMO, 1 sun solar illumination IV measurements were performed on the irradiated InGaAs solar cells and a characteristic radiation degradation curve was obtained using the solar cell conversion efficiency as the model parameter. Also presented are data comparing the radiation response of both n/p and p/n (fabricated by NREL) InGaAs solar cells as a function of base doping concentration. For the solar cell efficiency, the radiation degradation was found to be independent of the sample polarity for the same base doping concentration.

Description: Photovoltaic linear concentrator arrays can benefit from high performance solar cell technologies being developed at AstroPower. Specifically, these are the integration of thin GaAs solar cell and epitaxial lateral overgrowth technologies with the application of monolithically interconnected solar cell (MISC) techniques. This MISC array has several advantages which make it ideal for space concentrator systems. These are high system voltage, reliable low cost monolithically formed interconnections, design flexibility, costs that are independent of array voltage, and low power loss from shorts, opens, and impact damage. This concentrator solar cell will incorporate the benefits of light trapping by growing the device active layers over a low-cost, simple, PECVD deposited silicon/silicon dioxide Bragg reflector. The high voltage-low current output results in minimal 12R losses while properly designing the device allows for minimal shading and resistance losses. It is possible to obtain open circuit voltages as high as 67 volts/cm of solar cell length with existing technology. The projected power density for the high performance device is 5 kW/m for an AMO efficiency of 26% at 1 5X. Concentrator solar cell arrays are necessary to meet the power requirements of specific mission platforms and can supply high voltage power for electric propulsion systems. It is anticipated that the high efficiency, GaAs monolithically interconnected linear concentrator solar cell array will enjoy widespread application for space based solar power needs. Additional applications include remote man-portable or ultra-light unmanned air vehicle (UAV) power supplies where high power per area, high radiation hardness and a high bus voltage or low bus current are important. The monolithic approach has a number of inherent advantages, including reduced cost per interconnect and increased reliability of array connections. There is also a high potential for a large number of consumer products. Dual-use applications can include battery chargers and remote power supplies for consumer electronics products such as portable telephones/beepers, portable radios, CD players, dashboard radar detectors, remote walkway lighting, etc.

Description: Indium phosphide (InP) solar cells are being made on silicon (Si) wafers (InP/Si) to take advantage of both the radiation-hardness properties of the InP solar cell and the light weight and low cost of Si wafers compared to InP or germanium (Ge) wafers. The InP/Si cell application is for long duration and/or high radiation orbit space missions. InP/Si cells have higher absolute efficiency after a high radiation dose than gallium arsenide (GaAs) or silicon (Si) solar cells. In this work, base electron diffusion lengths in the N/P cell are extracted from measured AM0 short-circuit photocurrent at various irradiation levels out to an equivalent 1 MeV fluence of 1017 1 MeV electrons/sq cm for a 1 sq cm 12% BOL InP/Si cell. These values are then checked for consistency by comparing measured Voc data with a theoretical Voc model that includes a dark current term that depends on the extracted diffusion lengths.

Description: An analysis embodied in a PC computer program is presented which quantitatively demonstrates how the availability of radiation hard solar cells can minimize the cost of a global satellite communication system. The chief distinction between the currently proposed systems, such as Iridium Odyssey and Ellipsat, is the number of satellites employed and their operating altitudes. Analysis of the major costs associated with implementing these systems shows that operation within the earth's radiation belts can reduce the total system cost by as much as a factor of two, so long as radiation hard components including solar cells, can be used. A detailed evaluation of several types of planar solar cells is given, including commercially available Si and GaAs/Ge cells, and InP/Si cells which are under development. The computer program calculates the end of life (EOL) power density of solar arrays taking into account the cell geometry, coverglass thickness, support frame, electrical interconnects, etc. The EOL power density can be determined for any altitude from low earth orbit (LEO) to geosynchronous (GEO) and for equatorial to polar planes of inclination. The mission duration can be varied over the entire range planned for the proposed satellite systems. An algorithm is included in the program for determining the degradation of cell efficiency for different cell technologies due to proton and electron irradiation. The program can be used to determine the optimum configuration for any cell technology for a particular orbit and for a specified mission life. Several examples of applying the program are presented, in which it is shown that the EOL power density of different technologies can vary by an order of magnitude for certain missions. Therefore, although a relatively radiation soft technology can be made to provide the required EOL power by simply increasing the size of the array, the impact on the total system budget could be unacceptable, due to increased launch and hardware costs. In aggregate these factors can account for more than a 10% increase in the total system cost. Since the estimated total costs of proposed global coverage systems range from $1 Billion to $9 Billion, the availability of radiation hard solar cells could make a decisive difference in the selection of a particular constellation architecture.

Description: Multi-junction (MJ), gallium arsenide (GaAs), and silicon (Si) solar cells have respective test efficiencies of approximately 24%, 18.5% and 14.8%. Multi-junction and gallium arsenide solar cells weigh more than silicon solar cells and cost approximately five times as much per unit power at the cell level. A straw man trade is performed for the TRMM spacecraft to determine which of these cell types would have offered an overall performance and price advantage to the spacecraft. A straw man trade is also performed for the multi-junction cells under the assumption that they will cost over ten times that of silicon cells at the cell level. The trade shows that the TRMM project, less the cost of the instrument, ground systems and mission operations, would spend approximately $552 thousand dollars per kilogram to launch and service science in the case of the spacecraft equipped with silicon solar cells. If these cells are changed out for gallium arsenide solar cells, an additional 31 kilograms of science can be launched and serviced at a price of approximately $90 thousand per kilogram. The weight reduction is shown to derive from the smaller area of the array and hence reductions in the weight of the array substrate and supporting structure. If the silicon solar cells are changed out for multi-junction solar cells, an additional 45 kilograms of science above the silicon base line can be launched and serviced at a price of approximately $58 thousand per kilogram. The trade shows that even if the multi-junction arrays are priced over ten times that of silicon cells, a price that is much higher than projected, that the additional 45 kilograms of science are launched and serviced at $182 thousand per kilogram. This is still much less than original $552 thousand per kilogram to launch and service the science. Data and qualitative factors are presented to show that these figures are subject to a great deal of uncertainty. Nonetheless, the benefit of the higher efficiency solar cells for TRMM is far greater than the uncertainties in the analysis.

Description: In this paper we report the successful fabrication of large area, monolithic triple junction, n on p, GaInP2/GaAs/Ge cells. The highest open circuit voltage and cell efficiency (cell area: 4.078 sq cm) were measured at 2.573 V and 23.3%, respectively, under 1 sun, AMO illumination. To our knowledge, this is the highest single crystal, monolithic, two terminal triple junction cell efficiency demonstrated. In addition, excellent uniformity across a 3 inch diameter Ge substrates has also been achieved. An average cell efficiency of 22.8% across the 3 inch diameter wafer has been measured. We have also successfully fabricated welded cell-interconnect-cover (CIC) assemblies using these triple junction devices. The highest CIC efficiency was 23.2% (bare cell efficiency was 23.3%). The average efficiency for 25 CICs was 21.8%, which is very comparable to the 22.0% average bare cell efficiency before they were fabricated into the CICs. Finally, we have measured temperature coefficient and 1 MeV electron irradiation data. These will be presented in the paper.

Description: Energy storage and production in space requires rugged, reliable hardware which minimizes weight, volume, and maintenance while maximizing power output and usable energy storage. These systems generally consist of photovoltaic solar arrays which operate during sunlight cycles to provide system power and regenerate fuel (hydrogen) via water electrolysis; during dark cycles, hydrogen is converted by the fuel cell into system. The currently preferred configuration uses two separate systems (fuel cell and electrolyzer) in conjunction with photovoltaic cells. Fuel cell/electrolyzer system simplicity, reliability, and power-to-weight and power-to-volume ratios could be greatly improved if both power production (fuel cell) and power storage (electrolysis) functions can be integrated into a single unit. The Technology Management, Inc. (TMI), solid oxide fuel cell-based system offers the opportunity to both integrate fuel cell and electrolyzer functions into one unit and potentially simplify system requirements. Based an the TMI solid oxide fuel cell (SOPC) technology, the TMI integrated fuel cell/electrolyzer utilizes innovative gas storage and operational concepts and operates like a rechargeable 'hydrogen-oxygen battery'. Preliminary research has been completed on improved H2/H2O electrode (SOFC anode/electrolyzer cathode) materials for solid oxide, regenerative fuel cells. Improved H2/H2O electrode materials showed improved cell performance in both fuel cell and electrolysis modes in reversible cell tests. ln reversible fuel cell/electrolyzer mode, regenerative fuel cell efficiencies (ratio of power out (fuel cell mode) to power in (electrolyzer model)) improved from 50 percent (using conventional electrode materials) to over 80 percent. The new materials will allow the TMI SOFC system to operate as both the electrolyzer and fuel cell in a single unit. Preliminary system designs have also been developed which indicate the technical feasibility of using the TMI SOFC technology for space applications with high energy storage efficiencies and high specific energy. Development of small space systems would also have potential dual-use, terrestrial applications.

Description: A difficulty encountered in designing a unitized regenerative proton exchange membrane (PEM) fuel cell lies in the incompatibility of electrode structures and electrocatalyst materials optimized for either of the two functions (fuel cell or electrolyzer) with the needs of the other function. This difficulty is compounded in previous regenerative fuel cell designs by the fact that water, which is needed for proton conduction in the PEM during both modes of operation, is the reactant supplied to the anode in the electrolyzer mode of operation and the product formed at the cathode in the fuel cell mode. Drawbacks associated with existing regenerative fuel cells have been addressed in work performed at Lynntech. In a first innovation, electrodes function either as oxidation electrodes (hydrogen ionization or oxygen evolution) or as reduction electrodes (oxygen reduction or hydrogen evolution) in the fuel cell and electrolyzer modes, respectively. Control of liquid water within the regenerative fuel cell has been brought about by a second innovation. A novel PEM has been developed with internal channels that permit the direct access of water along the length of the membrane. Lateral diffusion of water along the polymer chains of the PEM provides the water needed at electrode/PEM interfaces. Fabrication of the novel unitized regenerative fuel cell and results obtained on testing it will be presented.

Description: Chemical beam epitaxy (CBE) has been shown to allow the growth of high quality materials with reproducible complex compositional and doping profiles. The main advantage of CBE compared to metalorganic chemical vapor deposition (MOCVD), the most popular technique for InP-based photovoltaic device fabrication, is the ability to grow high purity epilayers at much lower temperatures (450-530 C). We have previously shown that CBE is perfectly suited toward the fabrication of complex photovoltaic devices such as InP/InGaAs monolithically integrated tandem solar cells, because its low process temperature preserves the electrical characteristics of the InGaAs tunnel junction commonly used as an ohmic interconnect. In this work using CBE for the fabrication of optically transparent (with respect to the bottom cell) InP tunnel diodes is demonstrated. Epitaxial growth were performed in a Riber CBE 32 system using PH3 and TMIn as III and V precursors. Solid Be (p-type) and Si (n-type) have been used as doping sources, allowing doping levels up to 2 x 10(exp -19)/cu cm and 1 x 10(exp -19)/cu cm for n and p type respectively. The InP tunnel junction characteristics and the influence of the growth's conditions (temperature, growth rate) over its performance have been carefully investigated. InP p(++)/n(++) tunnel junction with peak current densities up to 1600 A/sq cm and maximum specific resistivities (V(sub p)/I(sub p) - peak voltage to peak current ratio) in the range of 10(exp -4) Omega-sq cm were obtained. The obtained peak current densities exceed the highest results previously reported for their lattice matched counterparts, In(0.53)Ga( 0.47)As and should allow the realization of improved minimal absorption losses in the interconnect InP/InGaAs tandem devices for Space applications. Owing to the low process temperature required for the top cell, these devices exhibit almost no degradation of its characteristics after the growth of subsequent thick InP layer suggesting minimal doping cross diffusion in the narrow space-charge region (approximately 1-5 nm) of the device. The fabrication of tandem devices using InP tunnel diodes as interconnect is in progress and will be reported at the conference.

Description: Solar Concentrator Array with Refractive Linear Element Technology (SCARLET) is one of the first practical photovoltaic concentrator array technologies that offers a number of benefits for space applications (i.e. high array efficiency, protection from space radiation effects, a relatively light weight system, minimized plasma interactions, etc.) The line-focus concentrator concept, however, also offers two very important advantages: (1) low-cost mass production potential of the lens material; and (2) relaxation of precise array tracking requirements to only a single axis. These benefits offer unique capabilities to both commercial and government spacecraft users, specifically those interested in high radiation missions, such as MEO orbits, and electric-powered propulsion LEO-to-GEO orbit raising applications. SCARLET is an aggressive hardware development and flight validation program sponsored by the Ballistic Missile Defense Organization (BMDO) and NASA Lewis Research Center. Its intent is to bring technology to the level of performance and validation necessary for use by various government and commercial programs. The first phase of the SCARLET program culminated with the design, development and fabrication of a small concentrator array for flight on the METEOR satellite. This hardware will be the first in-space demonstration of concentrator technology at the 'array level' and will provide valuable in-orbit performance measurements. The METEOR satellite is currently planned for a September/October 1995 launch. The next phase of the program is the development of large array for use by one of the NASA New Millenium Program missions. This hardware will incorporate a number of the significant improvements over the basic METEOR design. This presentation will address the basic SCARLET technology, examine its benefits to users, and describe the expected improvements for future missions.

Description: Improvements to GaAs solar array performance, from the use on solar cell coverslides of several reflecting coatings that reject unusable portions of the solar spectrum, are quantified. Blue-red-rejection (BRR) coverslides provide both infrared reflection (IRR) and ultraviolet rejection (UVR). BRR coverslides were compared to conventional antireflection (AR) and ultraviolet (UV) coated coverslides. A 2% improvement in peak-power output, relative to that from Ar-coated coverslides, is seen for cells utilizing BRR coverslides with the widest bandpass. Coverslide BRR-filter bandpass width and covered-solar-cell short-circuit current is a function of incident light angle and the observed narrower-bandpass filters are more sensitive to change in angle from the normal than are wide-bandpass filters. The first long-term (3000 hours) UV testing of unirradiated and 1 MeV electron-irradiated GaAs solar cells, with multilayer-coated coverslides to reduce solar array operating temperature, has indicated that all multilayer coatings on coverslides and solar cells will experience degradation from the space environment (UV and/or electrons). Five types of coverslide coatings, designed for GaAs solar cells, were tested as part of a NASA-sponsored space-flight qualification for BRR, multi-layer-coated, coverslides. The reponse to the different radiations varied with the coatings. The extent of degradation and its consequences on the solar cell electrical characteristics depend upon the coatings and the radiation. In some cases, an improved optical coupling was observed during long-term UV exposure to the optical stack. The benefits of multi-layered solar cell optics may depend upon both the duration and the radiation environment of a mission.

Description: The first commercial communications satellite with gallium-arsenide on germanium (GaAs/Ge) solar arrays is scheduled for launch in December 1995. The spacecraft, named MEASAT, was built by hughes Space and Telecommunications company for Binariang Satellite Systems of Malaysia. The solar cell assemblies consisted of large area GaAs/Ge cells supplied by Spectrolab Inc. with infrared reflecting (IRR) coverglass supplied by Pilkington Space Technology. A comprehensive characterization program was performed on the GaAs/Ge solar cell assemblies used on the MEASAT array. This program served two functions; first to establish the database needed to accurately predict on-orbit performance under a variety of conditions; and second, to demonstrate the ability of the solar cell assemblies to withstand all mission environments while still providing the required power at end-of-life. characterization testing included measurement of electrical performance parameters as a function of radiation exposure, temperature, and angle of incident light; reverse bias stability; optical and thermal properties; mechanical strength tests, panel fabrication, humidity and thermal cycling environmental tests. The results provided a complete database enabling the design of the MEASAT solar array, and demonstrated that the GaAs/Ge cells meet the spacecraft requirements at end-of-life.

Description: The Photovoltaic Array Space Power Plus Diagnostics (PASP Plus) experiment was developed by the Air Force's Phillips Laboratory with support from NASA's Lewis Research Center. It was launched on the Advanced Photovoltaic and Electronics EXperiments (APEX) satellite on August 3, 1994 into a 70 degree inclination, 363 km by 2550 km elliptical orbit. This orbit allows the investigation of space plasma effects on high-voltage operation (leakage current at positive voltages and arcing at negative voltages) in the perigee region. PASP Plus is testing twelve solar arrays. There are four planar Si arrays: an old standard type (used as a reference), the large-cell Space Station Freedom (SSF) array, a thin 'APSA' array, and an amorphous Si array. Next are three GaAs on Ge planar arrays and three new material planar arrays, including InP and two multijunction types. Finally, there are two concentrator arrays: a reflective-focusing Mini-Cassegrainian and a Fresnel-lens focusing Mini-Dome. PASP Plus's diagnostic sensors include: Langmuir probe to measure plasma density, an electrostatic analyzer (ESA) to measure the 30 eV to 30 KeV electron/ion spectra and determine vehicle negative potential during positive biasing, and a transient pulse monitor (TPM) to characterize the arcs that occur during the negative biasing. Through positive biasing of its test arrays, PASP Plus investigated the snapover phenomenon, which took place over the range of +100 to +300 V. It was found that array configurations where the interconnects are shielded from the space plasma (i.e., the concentrators or arrays with 'wrap-through' connectors) have lower leakage current. The concentrators exhibited negligible leakage current over the whole range up to +500 V. In the case of two similar GaAs on Ge arrays, the one with 'wrap-through' connectors had lower leakage current than the one with conventional interconnects. Through negative biasing, PASP Plus investigated the arcing rates of its test arrays. The standard Si array, with its old construction (exposed rough-surface interconnects), arced significantly over a wide voltage and plasma-density range. The other arrays arced at very low rates, mostly at voltages greater than -350 V and plasma densities near or greater than 10(exp 5)/cm(exp -3). AS expected according to theory, arcing was more prevalent when array temperatures were cold (based on biasing in eclipse).

Description: This paper describes solar cell panel designs that utilize new hgih efficiency solar cells along with lightweight rigid panel technology. The resulting designs push the W/kg and W/sq m parameters to new high levels. These new designs are well suited to meet the demand for higher performance small satellites. This paper reports on progress made on two SBIR Phase 1 contracts. One panel design involved the use of large area (5.5 cm x 6.5 cm) GaAs/Ge solar cells of 19% efficiency combined with a lightweight rigid graphite fiber epoxy isogrid substrate configuration. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power level of 60 W/kg with a potential of reaching 80 W/kg. The second panel design involved the use of newly developed high efficiency (22%) dual junction GaInP2/GaAs/Ge solar cells combined with an advanced lightweight rigid substrate using aluminum honeycomb core with high strength graphite fiber mesh facesheets. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power of 105 W/kg and 230 W/sq m. This paper will address the construction details of the panels and an a analysis of the component weights. A strawman array design suitable for a typical small-sat mission is described for each of the two panel design technologies being studied. Benefits in respect to weight reduction, area reduction, and system cost reduction are analyzed and compared to conventional arrays.

Description: Solar cells at potentials positive with respect to a surrounding plasma collect electrons. Current is collected by the exposed high voltage surfaces: the interconnects and the sides of the solar cells. This current is a drain on the array power that can be significant for high-power arrays. In addition, this current influences the current balance that determines the floating potential of the spacecraft. One of the objectives of the Air Force (PL/GPS) PASP Plus (Photovoltaic Array Space Power Plus Diagnostics) experiment is an improved understanding fo parasitic current collection. We have done computer modeling of parasitic current collection and have examined current collection flight data from the first year of operations. Prior to the flight we did computer modeling to improve our understanding of the physical processes that control parasitic current collection. At high potentials, the current rapidly rises due to a phenomenon called snapover. Under snapover conditions, the equilibrium potential distribution across the dielectric surface is such that part of the area is at potentials greater than the first crossover of the secondary yield curve. Therefore, each incident electron generates more than one secondary electron. The net effect is that the high potential area and the collecting area increase. We did two-dimensional calculations for the various geometries to be flown. The calculations span the space of anticipated plasma conditions, applied potential, and material parameters. We used the calculations and early flight data to develop an analytic formula for the dependence of the current on the primary problem variables. The analytic formula was incorporated into the EPSAT computer code. EPSAT allows us to easily extend the results to other conditions. PASP Plus is the principal experiment integrated onto the Advanced Photovoltaic and Electronics Experiments (APEX) satellite bus. The experiment is testing twelve different solar array designs. Parasitic current collection is being measured for eight of the designs under various operational and environment conditions. We examined the current collected as a function of the various parameters for the six non-concentrator designs. The results are similar to those obtained in previous experiments and predicted by the calculations. We are using the flight data to validate the analytic formula developed. The formula can be used to quantify the parasitic current collected. Anticipating the parasitic current value allows the spacecraft designer to include this interaction when developing the design.

Description: A radioisotope thermophotovoltaic generator space power system (RTPV) is lightweight, low-cost alternative to the present radioisotope thermoelectric generator system (RTG). The fabrication of such an RTPV generator has recently become feasible as the result of the invention of the GaSb infrared sensitive photovoltaic cell. Herein, we present the results of a parametric study of emitters and optical filters in conjuction with existing data on gallium antimonide cells. We compare a polished tungsten emitter with an Erbia selective emitter for use in combination with a simple dielectric filter and a gallium antimonide cell array. We find that the polished tungsten emitter is by itself a very selective emitter with low emissivity beyond 4 microns. Given a gallium antimonide cell and a tungsten emitter, a simple dielectric filter can be designed to transmit radiant energy below 1.7 microns and to reflect radiant energy between 1.7 and 4 microns back to the emitter. Because of the low long wavelength emissivity associated with the polished tungsten emitter, this simple dielectric filter then yields very respectable system performance. Also as a result of the longer wavelength fall-off in the tungsten emissivity curve, the radiation energy peak for a polished tungsten emitter operating at 1300 K shifts to shorter wavelengths relative to the blackbody spectrum so that the radiated energy peak falls right at the gallium antimonide cell bandedge. The result is that the response of the gallium antimonide cell is well matched to a polished tungsten emitter. We propose, therefore, to fabricate an operating prototype of a near term radioisotope thermophotovoltaic generator design consisting of a polished tungsten emitter, standard gallium antimonide cells, and a near-term dielectric filter. The Jet Propulsion Laboratory will design and build the thermal cavity, and JX Crystals will fabricate the gallium antimonide cells, dielectric filters, and resultant receiver panels. With 250 Watts of heat input, we expect this prototype to produce over 300 Watts of electrical energy output for a system energy conversion efficiency of over 12%. This low risk, near term design provides advances relative to present radioisotope thermophotovoltaic generators and has the additional advantage of allowing component and system development and testing to begin immediately. Improved cells and filters can easily be incorporated in this baseline system if they should become available in the future.

Description: The Naval Research Laboratory has been involved in developing InP solar cell technology since 1988. The purpose of these programs was to produce advanced cells for use in very high radiation environments, either as a result of operating satellites in the Van Allen belts or for very long duration missions in other orbits. Richard Statler was technical representative on the first program, with Spire Corporation as the contractor, which eventually produced several hundred, high efficiency 2 x 2 sq cm single crystal InP cells. The shallow homojunction technology which was developed in this program enabled cells to be made with AMO, one sun efficiencies greater than 19%. Many of these cells have been flown on space experiments, including PASP Plus, which have confirmed the high radiation resistance of InP cells. NRL has also published widely on the radiation response of these cells and also on radiation-induced defect levels detected by DLTS, especially the work of Rob Walters and Scott Messenger. In 1990 NRL began another Navy-sponsored program with Tim Coutts and Mark Wanlass at the National Renewable Energy Laboratory (NREL), to develop a one sun, two terminal space version of the InP-InGaAs tandem junction cell being investigated at NREL for terrestrial applications. These cells were grown on InP substrates. Several cells with AM0, one sun efficiencies greater than 22% were produced. Two 2 x 2 sq cm cells were incorporated on the STRV lA/B solar cell experiment. These were the only two junction, tandem cells on the STRV experiment. The high cost and relative brittleness of InP wafers meant that if InP cell technology were to become a viable space power source, the superior radiation resistance of InP would have to be combined with a cheaper and more robust substrate. The main technical challenge was to overcome the effect of the dislocations produced by the lattice mismatch at the interface of the two materials. Over the last few years, NRL and Steve Wojtczuk at Spire have been developing a single junction InP on Si cell, in an ONR-sponsored SBIR program. Both cell polarities were investigated and the best efficiencies to date (approximately 13% on a 2 x 4 sq cm cell) were achieved with n/p cells. Earlier this year NRL began a program with ASEC to develop a two terminal InP-InGaAs tandem cell on a Ge substrate. RTI and NREL are subcontractors on this program. The results of an ONR-sponsored study of the potential market for InP/Si cells will be discussed. Also the technical status of both the InP/Si and the InP-InGaAs/Ge programs will be given. The technical challenges still remaining will be briefly described.

Description: In the past 25 years, the majority of interplanetary spacecraft have been powered by nuclear sources. However, as the emphasis on smaller, low cost missions gains momentum, the majority of missions now being planned will use photovoltaic solar arrays. This will present challenges to the solar array builders, inasmuch as planetary requirements usually differ from earth orbital requirements. In addition, these requirements often differ greatly, depending on the specific mission; for example, inner planets vs. outer planets, orbiters vs. flybys, spacecraft vs. landers, and so on. Also, the likelihood of electric propulsion missions will influence the requirements placed on solar array developers. The paper will discuss representative requirements for a range of planetary missions now in the planning stages. Insofar as inner planets are concerned, a Mercury orbiter is being studied with many special requirements. Solar arrays would be exposed to high temperatures and a potentially high radiation environment, and will need to be increasingly pointed off sun as the vehicle approaches Mercury. Identification and development of cell materials and arrays at high incidence angles will be critical to the design. Missions to the outer solar system that have been studied include a Galilean orbiter and a flight to the Kuiper belt. While onboard power requirements would be small (as low as 10 watts), the solar intensity will require relatively large array areas. As a result, such missions will demand extremely compact packaging and low mass structures to conform to launch vehicle constraints. In turn, the large are, low mass designs will impact allowable spacecraft loads. Inflatable array structures, with and without concentration, and multiband gap cells will be considered if available. In general, the highest efficiency cell technologies operable under low intensity, low temperature conditions are needed. Solar arrays will power missions requiring as little as approximately 100 watts, up to several kilowatts (at Earth) in the case of solar electric propulsion missions. Thus, mass and stowage volume minimization will be required over a range of array sizes. Concentrator designs, inflatable structures, and the combination of solar arrays with the telecommunications system have been proposed. Performance, launch vehicle constraints, an cost will be the principal parameters in the design trade space. Other special applications will also be discussed, including requirements relating to planetary landers and probes. In those cases, issues relating to shock loads on landing, operability in (possibly dusty) atmospheres, and extreme temperature cycles must be considered, in addition to performance, stowed volume, and costs.

Description: The objective of this study was to examine the overall feasibility of deploying electromechanical flywheel systems in space used for excess energy storage. Results of previous Rocketdyne studies have shown that the flywheel concept has a number of advantages over the NiH2 battery, including higher specific energy, longer life and high roundtrip efficiency. Based on this prior work, this current study was broken into four subtasks. The first subtask investigated the feasibility of replacing the NiH2 battery orbital replacement unit (ORU) on the international space station (ISSA) with a flywheel ORU. In addition, a conceptual design of a generic flywheel demonstrator experiment implemented on the ISSA was completed. An assessment of the life cycle cost benefits of replacing the station battery energy storage ORU's with flywheel ORU's was performed. A fourth task generated a top-level development plan for critical flywheel technologies, the flywheel demonstrator experiments and its evolution into the production unit flywheel replacement ORU.

Description: This paper summarizes results of several experiments flown on the Long Duration Exposure Facility (LDEF) to examine the effects of the space environment on materials and technologies to be used in solar arrays. The various LDEF experiments are compared to each other as well as to other solar cell flight data published in the literature. Data on environmental effects such as atomic oxygen, ultraviolet light, micrometeoroids and debris, and charged particles are discussed in detail. The results from the LDEF experiments allow us to draw several conclusions. Atomic oxygen erodes unprotected silver interconnects, unprotected Kapton, and polymer cell covers, but certain dielectric coatings can protect both silver and Kapton. Cells that had wrap-around silver contacts sometimes showed erosion at the edges, but more recently developed wrap-through cells are not expected to have these problems. Micrometeoroid and debris damage is limited to the area close to the impact, and microsheet covers provide the cells with some protection. Damage from charged particles was as predicted, and the cell covers provided adequate protection. In general, silicon cells with microsheet covers showed very little degradation, and solar modules showed less than 3 percent degradation, except when mechanically damaged. The solar cell choices for the Space Station solar array are supported by the data from LDEF.

Description: Most emerging unmanned undersea vehicle (UUV) missions require significantly longer range and endurance than is achievable with existing battery technology. The Aluminum-Oxygen (Al-O2) semi-cell is a candidate technology capable of providing a significant improvement in endurance compared to the silver-zinc battery technology currently used in UUVs and compares favorably to other proposed UUV power systems not only in performance, but also in safety and logistics. An Al-O2 semi-cell system is under development by Loral Defense Systems-Akron (Loral) for the ARPA/Navy 44 in. diameter UUV test vehicle. The power plant consists of a cell stack, gas management, oxygen storage, electrolyte management, coolant and controller subsystems, designed to replace the existing silver-zinc battery and meet existing weight, volume, electrical and thermal requirements, therefore minimizing modifications to the UUV. A detailed system design is complete. A component and material endurance test to evaluate compatibility and reliability of various material arid components is complete. Sub scale (Short stack) system testing is completed. A full-scale demonstration unit is now under construction in the second half of 1995. The full scale demonstration test will simulate environmental conditions of the operational system. This paper summarizes the results of the extensive short stack and endurance test programs, describes the plan for full-scale testing, and concludes with a brief discussions of future directions for this technology. This program is sponsored by ARPA Maritime Systems Technology Office under NASA contract NAS3-26715.

Description: The office of Space, DOE, appointed a Lunar Surface Power Working Group to review candidate systems for the First Lunar Outpost habitat. The working group met for a total of five days in the fall of 1992 and concluded that the candidate involving a photovoltaic unit, a fuel cell, a regenerator to recycle the reactants, and storage of oxygen and hydrogen gases was the most attractive for this application. Most of the volume (97 percent) and weight (63 percent) are taken up by the reactants and their storage tanks. Therefore, in my work for the Group, and in this report, I have concentrated on finding ways to reduce these volumes and weights. Three options were considered: (1) the baseline case considered in the preliminary system design, that of separate high pressure (200 bar) storage tanks; (2) the use of two of the descent storage propellant tanks wrapped with graphite fibers to increase the pressure capability; and (3) the use of cryogenic storage of reactants in the propellant tanks. The first option results in high storage tank mass and volume. The second option saves 90 percent of the volume by making use of the propellant tanks, but it has little if any weight advantages; the weight saved by not providing extra tanks for reactant storage is nearly entirely added back by the weight of the additional material (graphite fibers) to strengthen the propellant tanks. Use of the descent storage propellant tanks for storage of the fuel cell reactants as cryogenic liquids requires a gas liquefaction system. The weight of this system is expected to be less than that of the storage tanks but it would require development and testing to prove its reliability. The solar array would have to be 40 percent larger and the heat projection range would be 170 percent larger than for storage of reactants as high pressure gases. For a high power system (greater than 20 kW) the larger energy storage requirement would probably favor the cryogenic storage option.

Description: R and D projects on electricity generating wind turbines were conducted at the NASA Lewis Research Center from 1973 to 1988. Most projects were sponsored by the U.S. Department of Energy (DOE), a major element of its Federal Wind Energy Program. Another large wind turbine project was by the Bureau of Reclamation of the U.S. Department of Interior (DOI). From 1988 to 1995, NASA wind energy activities have been directed toward the transfer of technology to commercial and academic organizations. As part of these technology transfer activities, previously unpublished manuscripts have been assembled and presented here to share the wind turbine research results with the wind energy community. A variety of wind turbine technology topics are discussed: Wind and wake models; Airfoil properties; Structural analysis and testing; Control systems; Variable speed generators; and acoustic noise. Experimental and theoretical results are discussed.

Description: A major program of research and development projects on wind turbines for generating electricity was conducted at the NASA Lewis Research Center from 1973 to 1988. Most of these projects were sponsored by the U.S. Department of Energy (DOE), as a major element of its Federal Wind Energy Program. One other large-scale wind turbine project was sponsored by the Bureau of Reclamation of the Department of Interior (DOI). The peak years for wind energy work at Lewis were 1979-80, when almost 100 engineers, technicians, and administrative personnel were involved. From 1988 their conclusion in 1995, NASA wind energy activities have been directed toward the transfer of technology to commercial and academic organizations. Wind energy activities at NASA can be divided into two broad categories which are closely related and often overlapping: (1) Designing, building, and testing a series of 12 large-scale, experimental, horizontal-axis wind turbines (HAWT's); and (2) conducting supporting research and technology (SR&T) projects. The purpose of this bibliography is to assist those active in the field of wind energy in locating the technical information they need on wind power planning, wind loads, turbine design and analysis, fabrication and installation, laboratory and field testing, and operations and maintenance. This bibliography contains approximately 620 citations of publications by over 520 authors and co-authors. Sources are: (1) NASA reports authored by government grantee, and contractor personnel, (2) papers presented by attendees at NASA-sponsored workshops and conferences, (3) papers presented by NASA personnel at outside workshops and conferences, and (4) outside publications related to research performed at NASA/ DOE wind turbine sites.

Description: The main purpose of this research program is to investigate potential semiconductor materials and their multi-band-gap MQW (multiple quantum wells) structures for high efficiency solar cells for aerospace and commercial applications. The absorption and PL (photoluminescence) spectra, the carrier dynamics, and band structures have been investigated for semiconductors of InP, GaP, GaInP, and InGaAsP/InP MQW structures, and for semiconductors of GaAs and AlGaAs by previous measurements. The barrier potential design criteria for achieving maximum energy conversion efficiency, and the resonant tunneling time as a function of barrier width in high efficiency MQW solar cell structures have also been investigated in the first two years. Based on previous carrier dynamics measurements and the time-dependent short circuit current density calculations, an InAs/InGaAs - InGaAs/GaAs - GaAs/AlGaAs MQW solar cell structure with 15 bandgaps has been designed. The absorption and PL spectra in InGaAsP/InP bulk and MQW structures were measured at room temperature and 77 K with different pump wavelength and intensity, to search for resonant states that may affect the solar cell activities. Time-resolved IR absorption for InGaAsP/InP bulk and MQW structures has been measured by femtosecond visible-pump and IR-probe absorption spectroscopy. This, with the absorption and PL measurements, will be helpful to understand the basic physics and device performance in multi-bandgap InAs/InGaAs - InGaAs/InP - InP/InGaP MQW solar cells. In particular, the lifetime of the photoexcited hot electrons is an important parameter for the device operation of InGaAsP/InP MQW solar cells working in the resonant tunneling conditions. Lastly, time evolution of the hot electron relaxation in GaAs has been measured in the temperature range of 4 K through 288 K using femtosecond pump-IR-probe absorption technique. The temperature dependence of the hot electron relaxation time in the X valley has been measured.

Description: This document contains abstracts of the proceedings of NASA's fifth Space Electrochemical Research and Technology (SERT) Conference, held at the NASA Lewis Research Center on May 1-3, 1995. The objective of the conference was to assess the present status and general thrust of research and development in those areas of electrochemical technology required to enable NASA missions into the next century. The conference provided a forum for the exchange of ideas and opinions of those actively involved in the field, in order to define new opportunities for the application of electrochemical processes in future NASA missions. Papers were presented in three technical areas: (1) the electrochemical interface, (2) the next generation in aerospace batteries and fuel cells, and (3) electrochemistry for non-energy storage applications. This document contains the abstracts of the papers presented.

Description: The proceedings of the 27th Annual NASA Aerospace Battery Workshop, hosted by the Marshall Space Flight Center on November 15-17, 1994 are presented. The workshop was attended by representatives from various government agencies, as well as contractors and manufacturers, both U.S. and abroad. The subjects covered included: (1) nickel-cadium; (2) nickel-hydrogen, (3) nickel-metal hydride, and (4) lithium based technologies, as well as flight and ground test data.

Description: The current generation of communications satellites are located primarily in geosynchronous Earth orbit (GEO). Over the next decade, however, a new generation of communications satellites will be built and launched, designed to provide a world-wide interconnection of portable telephones. For this mission, the satellites must be positioned in lower polar and near-polar orbits. To provide complete coverage, large numbers of satellites will be required. Because the required number of satellites decreases as the orbital altitude is increased, fewer satellites would be required if the orbit chosen were raised from low to intermediate orbit. However, in intermediate orbits, satellites encounter significant radiation due to trapped electrons and protons. Radiation tolerant solar cells may be necessary to make such satellites feasible. We analyze the amount of radiation encountered in low and intermediate polar orbits at altitudes of interest to next-generation communication satellites, calculate the expected degradation for silicon, GaAs, and InP solar cells, and show that the lifetimes can be significantly increased by use of advanced solar cells.

Description: During a 22-month period from February 1991 to December 1993, a dedicated group of students, faculty, and staff at California State University, Los Angeles completed a project to design, build, and race their second world class solar-powered electric vehicle, the Solar Eagle 2. This is the final report of that project. As a continuation of the momentum created by the success of the GM-sponsored Sunrayce USA in 1990, the U.S. Department of Energy (DOE) picked up the banner from General Motors as sponsors of Sunrayce 93. In February 1991, the DOE sent a request for proposals to all universities in North America inviting them to submit a proposal outlining how they would design, build, and test a solar-powered electric vehicle for a seven-day race from Arlington, Texas to Minneapolis, Minnesota, to be held in June 1993. Some 70 universities responded. At the end of a proposal evaluation process, 36 universities including CSLA were chosen to compete. This report documents the Solar Eagle 2 project--the approaches take, what was learned, and how our experience from the first Solar Eagle was incorporated into Solar Eagle 2. The intent is to provide a document that would assist those who may wish to take up the challenge to build Solar Eagle 3.

Description: Unmanned Aerial Vehicles (UAV) are being proposed for many applications including surveillance, mapping and atmospheric studies. These applications require a lightweight, low speed, medium to long duration airplane. Due to the weight, speed, and altitude constraints imposed on such aircraft, solar array generated electric power is a viable alternative to air-breathing engines. Development of such aircraft is currently being funded under the Environmental Research Aircraft and Sensor Technology (ERAST) program. NASA Lewis Research Center (LeRC) is currently building a Solar Electric Airplane to demonstrate UAV technology. This aircraft utilizes high efficiency Applied Solar Energy Corporation (ASEC) GaAs/Ge space solar cells. The cells have been provided by the Air Force through the ManTech Office. Expected completion of the plane is early 1995, with the airplane currently undergoing flight testing using battery power.

Description: We present the emitter efficiency results for the thin film 25 percent Ho YAG (Yttrium Aluminum Garnet, Y3Al5O12) selective emitter from 1000 to 1700 K with a platinum substrate. Spectral emittance and emissive power measurements were made (1.2 less than lambda less than 3.2 microns) and used to calculate the radiative efficiency. The radiative efficiency and power density of rare earth doped selective emitters are strongly dependent on temperature and experimental results indicate an optimum temperature (1650 K for Ho YAG) for thermophotovoltaic (TPV) applications.