ALBERT

Notes: Andalusite porphyroblasts are totally pseudomorphosed by margarite–paragonite aggregates in aluminous pelites containing the peak mineral assemblage andalusite, chlorite, chloritoid, margarite, paragonite, quartz ± garnet, in a NW Iberia contact area. Equilibria at low P–T are investigated using new KFMASH and (mainly) MnCNKFMASH grids constructed with Thermocalc 3.21. P–T and T–X pseudosections with phase modal volume isopleths are constructed for compositions relatively richer and poorer in andalusite to model the assemblages in an andalusite-bearing rock that contains a thin andalusite-rich band (ARB) during retrogression. Their compositions, prior to retrogression, are used in the modelling, and have been retrieved by restoring the pseudomorph-forming elements into the current-depleted matrix, except for Al2O3 which is assumed to be immobile. Compositional differences between the thin band and the rest of the rock have not resulted in differences in andalusite porphyroblast retrogression. The absence of chloritoid resorbtion implies either a pressure increase at constant reacting-system composition, or that its composition changed during retrogression at constant pressure, by becoming enriched in the progressively replaced andalusite porphyroblasts. T–X pseudosections at 1 kbar model this latter process using as end-members in X, first, the restored original rock and ARB compositions, and, then the same process, taking into account the change in composition of both as retrogression proceeded. The MnNCKFMASH pseudosections of rocks with different Al contents facilitate making further deductions on the rock-composition control of the resulting assemblages upon retrogression. Andalusite eventually disappears in relatively Al-poor rocks, resulting, as in this study, in a rock formed by chloritoid–chlorite as the only FM minerals, plus margarite–paragonite pseudomorphs of andalusite. In rocks richer in Al, chlorite would progressively disappear and a kyanite/andalusite–chloritoid assemblage would eventually be stable at retrograde conditions. The Al-silicate, stable during retrogression in Al-rich rocks, indicates pressure conditions and hence the tectonic context under which retrogression took place.

Notes: In statistically optimised P–T estimation, the contributions to overall uncertainty from different sources are represented by ellipses. One source, for a diffusion-controlled reaction at non-equilibrium, is diffusion modelling of the reaction texture. This modelling is used to estimate ratios, Q, between free-energy differences, ΔG, of reactions among mineral end-members, to replace the equilibrium condition ΔG = 0. The associated uncertainty is compared with those already inherent in the equilibrium case (from end-member data, activity models and mineral compositions). A compact matrix formulation is introduced for activity coefficients, and their partial derivatives governing error propagation. The non-equilibrium example studied is a corona reaction with the assemblage Grt–Opx–Cpx–Pl–Qtz. Two garnet compositions are used, from opposite sides of the corona. In one of them, affected by post-reaction Fe, Mg exchange with pyroxene, the problem of reconstructing the original composition is overcome by direct use of ratios between chemical-potential differences, given by the diffusion modelling. The number of geothermobarometers in the optimisation is limited by near-degeneracies. Their weightings are affected by strong correlations among Q ratios. Uncertainty from diffusion modelling is not large in comparison with other sources. Overall precision is limited mainly by uncertainties in activity models. Hypothetical equilibrium P–T are also estimated for both garnet compositions. By this approach, departure from equilibrium can be measured, with statistical uncertainties. For the example, the result for difference from equilibrium pressure is 1.2 ± 0.7 kbar.

Notes: This paper characterizes the metamorphic thermal structure of the Higo Metamorphic Complex (HMC) and presents the results of a numerical simulation of a geotherm with melt migration and solidification. Reconstruction of the geological and metamorphic structure shows that the HMC initially had a simple thermal structure where metamorphic temperatures and pressures increased towards apparent lower structural levels. Subsequently, this initial thermal structure has been collapsed by E–W and NNE–SSW trending high-angle faults. Pressure and temperature conditions using the analysis of mineral assemblages and thermobarometry define a metamorphic field P–T array that may be divided into two segments: the array at apparent higher structural levels has a low-dP/dT slope, whereas that at apparent lower structural levels has a high-dP/dT slope. This composite array cannot be explained by heat conduction in subsolidus rocks alone. Migmatite is exposed pervasively at apparent lower structural levels, but large syn-metamorphic plutons are absent at the levels exposed in the HMC. Transport and solidification of melt within migmatite is a potential mechanism to generate the composite array. Thermal modelling of a geotherm with melt migration and solidification shows that the composite thermal structure may be formed by a change of the dominant heat transfer from an advective regime to a conduction regime with decreasing depth. The model also predicts that strata beneath the crossing point will consist of high-grade solid metamorphic rocks and solidified melt products, such as migmatite. This prediction is consistent with the observation that migmatite was associated with the very high-dP/dT slope. The melt migration model is able to generate the very high-dP/dT segment due to the high rate of heat transfer by advection.

Notes: This study analyses the mineralogical and chemical transformations associated with an Alpine shear zone in polymetamorphic metapelites from the Monte Rosa nappe in the upper Val Loranco (N-Italy). In the shear zone, the pre-Alpine assemblage plagioclase + biotite + kyanite is replaced by the assemblage garnet + phengite + paragonite at eclogite facies conditions of about 650 °C at 12.5 kbar. Outside the shear zone, only minute progress of the same metamorphic reaction was attained during the Alpine metamorphic overprint and the pre-Alpine mineral assemblage is largely preserved. Textures of incomplete reaction, such as garnet rims at former grain contacts between pre-existing plagioclase and biotite, are preserved in the country rocks of the shear zone. Reaction textures and phase relations indicate that the Alpine metamorphic overprint occurred under largely anhydrous conditions in low strain domains. In contrast, the mineralogical changes and phase equilibrium diagrams indicate water saturation within the Alpine shear zones. Shear zone formation occurred at approximately constant volume but was associated with substantial gains in silica and losses in aluminium and potassium. Changes in mineral modes associated with chemical alteration and progressive deformation indicate that plagioclase, biotite and kyanite were not only consumed in the course of the garnet-and phengite-producing reactions, but were also dissolved ‘congruently’ during shear zone formation. A large fraction of the silica liberated by plagioclase, biotite and kyanite dissolution was immediately re-precipitated to form quartz, but the dissolved aluminium- and potassium-bearing species appear to have been stable in solution and were removed via the pore fluid. The reaction causes the localization of deformation by producing fine-grained white mica, which forms a mechanically weak aggregate.

Notes: Low-pressure crystal-liquid equilibria in pelitic compositions are important in the formation of low-pressure, high-temperature migmatites and in the crystallization of peraluminous leucogranites and S-type granites and their volcanic equivalents. This paper provides data from vapour-present melting of cordierite-bearing pelitic assemblages and augments published data from vapour-present and vapour-absent melting of peraluminous compositions, much of which is at higher pressures. Starting material for the experiments was a pelitic rock from Morton Pass, Wyoming, with the major assemblage quartz-K feldspar-biotite-cordierite, approximately in the system KFMASH. A greater range in starting materials was obtained by addition of quartz and sillimanite to aliquots of this rock. Sixty-one experiments were carried out in cold-seal apparatus at pressures of 1–3.5 kbar (particularly 2 kbar) and temperatures from 700 to 840 °C, with and without the addition of water. In the vapour-present liquidus relations at 2 kbar near the beginning of melting, the sequence of reactions with increasing temperature is: Qtz + Kfs + Crd + Sil + Spl + V = L; Qtz + Kfs + Crd + Spl + Ilm + V = Bt + L; and Qtz + Bt + V = Crd + Opx + Ilm + L. Vapour-absent melting starts at about 800 °C with a reaction of the form Qtz + Bt = Kfs + Crd + Opx + Ilm + L. Between approximately 1–3 kbar the congruent melting reaction is biotite-absent, and biotite is produced by incongruent melting, in contrast to higher-pressure equilibria. Low pressure melts from pelitic compositions are dominated by Qtz-Kfs-Crd. Glasses at 820–840 °C have calculated modes of approximately Qtz42Kfs46Crd12. Granites or granitic leucosomes with more than 10–15% cordierite should be suspected of containing residual cordierite. The low-pressure glasses are quite similar to the higher-pressure glasses from the literature. However, XMg increases from about 0.1–0.3 with increasing pressure from 1 to 10 kbar, and the low-temperature low-pressure glasses are the most Fe-rich of all the experimental glasses from pelitic compositions.

Notes: Quartz-rich veins in metapelitic schists of the Sanandaj-Sirjan belt, Hamadan region, Iran, commonly contain two Al2SiO5 polymorphs, and, more rarely, three coexisting Al2SiO5 polymorphs. In most andalusite and sillimanite schists, the types of polymorphs in veins correlate with Al2SiO5 polymorph(s) in the host rocks, although vein polymorphs are texturally and compositionally distinct from those in adjacent host rocks; e.g. vein andalusite is enriched in Fe2O3 relative to host rock andalusite. Low-grade rocks contain andalusite + quartz veins, medium-grade rocks contain andalusite + sillimanite + quartz ± plagioclase veins, and high-grade rocks contain sillimanite + quartz + plagioclase veins/leucosomes. Although most andalusite and sillimanite-bearing veins occur in host rocks that also contain Al2SiO5, kyanite-quartz veins crosscut rocks that lack Al2SiO5 (e.g. staurolite schist, granite). A quartz vein containing andalusite + kyanite + sillimanite + staurolite + muscovite occurs in andalusite–sillimanite host rocks. Textural relationships in this vein indicate the crystallization sequence andalusite to kyanite to sillimanite. This crystallization sequence conflicts with the observation that kyanite-quartz veins post-date andalusite–sillimanite veins and at least one intrusive phase of a granite that produced a low-pressure–high-temperature contact aureole; these relationships imply a sequence of andalusite to sillimanite to kyanite. Varying crystallization sequences for rocks in a largely coherent metamorphic belt can be explained by P–T paths of different rocks passing near (slightly above, slightly below) the Al2SiO5 triple point, and by overprinting of multiple metamorphic events in a terrane that evolved from a continental arc to a collisional orogen.

Notes: Zircon fission track dating and track length analysis in the high-grade part of the Asemigawa region of the Sanbagawa belt demonstrates a simple cooling history passing through the partial annealing zone at 63.2 ± 5.8 (2 σ) Ma. Combining this age with previous results of phengite and amphibole K–Ar and 40Ar/39Ar dating gives a cooling rate of between 6 and 13 °C Myr−1, which can be converted to a maximum exhumation rate of 0.7 mm year−1 using the known shape of the P–T path. This is an order of magnitude lower than the early part of the exhumation history. In contrast, zircon fission track analyses in the low-grade Oboke region show that this area has undergone a complex thermal history probably related to post-orogenic secondary reheating younger than c. 30 Ma. This event may correlate with the widespread igneous activity in south-west Japan around 15 Ma. The age of subduction-related metamorphism in the Oboke area is probably considerably older than the generally accepted range of 77–70 Ma.

Notes: Garnet-bearing ultramafic rocks including clinopyroxenite, wehrlite and websterite locally crop out in the Higashi-akaishi peridotite of the Besshi region in the Cretaceous Sanbagawa metamorphic belt. These rock types occur within dunite as lenses, boudins or layers with a thickness ranging from a few centimetres to 1 metre. The wide and systematic variation of bulk-rock composition and the overall layered structure imply that the ultramafic complex originated as a cumulate sequence. Garnet and other major silicates contain rare inclusions of edenitic amphibole, chlorite and magnetite, implying equilibrium at relatively low P–T conditions during prograde metamorphism. Orthopyroxene coexisting with garnet shows bell-shaped Al zoning with a continuous decrease of Al from the core towards the rim, consistent with rims recording peak metamorphic conditions. Estimated P–T conditions using core and rim compositions of orthopyroxene are 1.5–2.4 GPa/700–800 °C and 2.9–3.8 GPa/700–810 °C, respectively, implying a high P/T gradient (〉 3.1 GPa/100 °C) during prograde metamorphism. The presence of relatively low P–T conditions at an early stage of metamorphism and the steep P/T gradient together trace a concave upwards P–T path that shows increasing P/T with higher T, similar to P–T paths reported from other UHP metamorphic terranes. These results suggest either (1) down dragging of hydrated mantle cumulate parallel to the slab–wedge interface in the subduction zone by mechanical coupling with the subducting slab or (2) ocean floor metamorphism and/or serpentinization at early stage of subduction of oceanic lithosphere and ensuing HP–UHP prograde metamorphism.

Notes: During emplacement and cooling, the layered mafic–ultramafic Kettara intrusion (Jebilet, Morocco) underwent coeval effects of deformation and pervasive fluid infiltration at the scale of the intrusion. In the zones not affected by deformation, primary minerals (olivine, plagioclase, clinopyroxene) were partially or totally altered into Ca-amphibole, Mg-chlorite and CaAl-silicates. In the zones of active deformation (centimetre-scale shear zones), focused fluid flow transformed the metacumulates (peridotites and leucogabbros) into ultramylonites where insoluble primary minerals (ilmenite, spinel and apatite) persist in a Ca-amphibole-rich matrix. Mass-balance calculations indicate that shearing was accompanied by up to 200% volume gain; the ultramylonites being enriched in Si, Ca, Mg, and Fe, and depleted in Na and K. The gains in Ca and Mg and losses in Na and K are consistent with fluid flow in the direction of increasing temperature.When the intrusion had cooled to temperatures prevailing in the country rock (lower greenschist facies), deformation was still active along the shear zones. Intense intragranular fracturing in the shear zone walls and subsequent fluid infiltration allowed shear zones to thicken to metre-scale shear zones with time. The inner parts of the shear zones were transformed into chlorite-rich ultramylonites. In the shear zone walls, muscovite crystallized at the expense of Ca–Al silicates, while calcite and quartz were deposited in ‘en echelon’ veins. Mass-balance calculations indicate that formation of the chlorite-rich shear zones was accompanied by up to 60% volume loss near the centre of the shear zones; the ultramylonites being enriched in Fe and depleted in Si, Ca, Mg, Na and K while the shear zones walls are enriched in K and depleted in Ca and Si. The alteration observed in, and adjacent to the chlorite shear zones is consistent with an upward migrating regional fluid which flows laterally into the shear zone walls. Isotopic (Sr, O) signatures inferred for the fluid indicate it was deeply equilibrated with host lithologies.

Notes: As the best preserved high- and ultrahigh-pressure (HP and UHP) metamorphic terrane in the Qinling-Dabieshan-Sulu orogen, western Dabieshan is divided into six lithotectonic units along a traverse across the orogen, i.e. from north to south, the Nanwan, Balifan, Huwan, Xinxian, Hong'an and Mulanshan units. In this terrane five eclogite-bearing zones (I–V) are developed. The garnet and clinopyroxene in eclogites from these zones exhibit chemical zoning, suggesting that the rims record general peak temperature and pressure. Thermobarometric study indicates that the peak P–T conditions of eclogite are 550–570°C and 21 kbar for Zone I, 470–500°C and 14–17 kbar for Zone II, 620–670°C and 26–29 kbar for Zone III, 530–560°C and 20–22 kbar for Zone IV, and 490–510°C and 19–20 kbar for Zone V. The symmetrical thermobaric pattern, in conjunction with structural and geochronological data, demonstrates that the Huwan and Hong'an units belong to the same HP slice overlying the UHP slice. This pattern, together with the Mulanshan LT/HP blueschist–greenschist belt in the south, roughly constitutes a ‘normal’ metamorphic zonation. However, clear metamorphic gaps occur between different slices. It is inferred that the LT/HP, HP and UHP slices were broken up from the downgoing slab during subduction and reached different depths along different geothermal gradients. The successive subduction of underlying slices leads to a nearly concomitant uplift of overlying slices, whereas exhumation of the deepest UHP slice was effected by underthrusting of the lower crust of the Yangtze craton.

Notes: The Zermatt-Saas serpentinite complex is an integral member of the Penninic ophiolites of the Central Alps and represents the mantle part of the oceanic lithosphere of the Tethys. Metamorphic textures of the serpentinite preserve the complex mineralogical evolution from primary abyssal peridotite through ocean-floor hydration, subduction-related high-pressure overprint, meso-Alpine greenschist facies metamorphism, and late-stage hydrothermal alteration. The early ocean floor hydration of the spinel harzburgites is still visible in relic pseudomorphic bastite and locally preserved mesh textures. The primary serpentine minerals were completely replaced by antigorite. The stable assemblage in subduction-related mylonitic serpentinites is antigorite–olivine–magnetite ± diopside. The mid-Tertiary greenschist facies overprint is characterized by minor antigorite recrystallization. Textural and mineral composition data of this study prove that the hydrated mineral assemblages remained stable during high-pressure metamorphism of up to 2.5 GPa and 650 °C. The Zermatt-Saas serpentinites thus provide a well documented example for the lack of dehydration of a mantle fragment during subduction to 75 km depth.

Notes: Quantitative P–T path determination in metamorphic rocks is commonly based on the variation in composition of growth-zoned garnet. However, some component of growth zoning in garnet is necessarily the result of an effective bulk composition change within the rock that has been generated by crystal fractionation of components into the core of garnet. Therefore, any quantitative calculation of the P–T regime of garnet growth should be completed using an accurate assessment of the composition of the chemical system from which garnet is growing. Consequently, a method for calculating the extent of crystal fractionation that provides a means of estimating the composition of the unfractionated rock at any stage during garnet growth is developed. The method presented here applies a Rayleigh fractionation model based on measured Mn content of garnet to generate composition v. modal proportion curves for garnet, and uses those curves to estimate the vectors of crystal fractionation. The technique is tested by calculating the precision of the equilibrium between three garnet compositional variables within the chemical system determined to be appropriate for each of a series of microprobe analyses from garnet. Application of the fractionation calculations in conjunction with the P–T estimates based on intersecting compositional isopleths provides a means of calculating P–T conditions of garnet growth that is based on individual point-analyses on a garnet grain. Such spatially precise and easily obtainable P–T data allow for detailed parallel studies of the microstructural, the P–T, and the chemical evolution of metamorphosed pelites. This method provides a means of studying the dynamics of orogenic systems at a resolution that was previously unattainable.

Notes: Field, petrographic, microstructural and isotopic studies of mylonitic gneisses and associated pegmatites along the Hope Valley shear zone in southern Rhode Island indicate that late Palaeozoic deformation (c. 275 Ma) in this zone occurred at very high temperatures (〉650 °C). High-energy cuspate/lobate phase boundary microstructures, a predominance of equant to sub-equant grains with low internal lattice strain, and mixed phase distributions indicate that diffusion creep was an important and possibly predominant deformation mechanism. Field and petrographic evidence are consistent with the presence of an intergranular melt phase during deformation, some of which collected into syntectonic pegmatites. Rb/Sr isotopic analyses of tightly sampled pegmatites and wall rocks confirm that the pegmatites were derived as partial melts of the immediately adjacent, isotopically heterogeneous mylonitic gneisses. The presence of syntectonic interstitial melts is inferred to have permitted a switch from dislocation creep to melt-enhanced diffusion creep as the dominant mechanism in these relatively coarse-grained mylonitic gneisses (200–500 µm syn-deformational grain size). A switch to diffusion creep would lead to significant weakening, and may explain why the Hope Valley shear zone evolved into a major regional tectonic boundary. This work identifies conditions under which diffusion creep operates in naturally deformed granitic rocks and illuminates the deformation processes involved in the development of a tectonic boundary between two distinct Late Proterozoic (Avalonian) basement terranes.

Notes: The Pouébo and Diahot terranes of NE New Caledonia mostly comprise eclogite to blueschist facies metabasite and metasedimentary rocks that experienced c. 40 Ma metamorphism. This Eocene high-P event has been linked with the SW-directed obduction of the New Caledonian Ophiolite, an extensive ultramafic nappe that dominates outcrop in the south of the island. In the north, ultramafic lithologies are found only as sheets or discrete lenticular masses interleaved with, but separated from, the eclogites and blueschists by foliated talc–chlorite–serpentine–carbonate-bearing rocks. The base of the largest and best-preserved ultramafic body at Yambé is marked by a distinctive (2 m thick) layer of high-P mylonite that preserves evidence for early blueschist facies conditions (S1) as inclusions in eclogite facies minerals. Textural evidence preserved in olivine-bearing serpentinites and their bounding mafic mylonites suggest that the ultramafic bodies were emplaced within the structurally highest levels of the high-P terrane as serpentinite tectonites sourced from hydrated mantle, formerly in the hangingwall of the Eocene subduction zone. Serpentinite emplacement accompanied burial of the NE New Caledonian margin at T〈500 °C and P〈16 kbar. The ultramafic fragments were buried to depths of 50–60 km in the subduction zone, where olivine was stable and coarse-grained garnet–omphacite-rich assemblages developed in low strain domains within enclosing mylonites. Host metabasic and metasedimentary rocks from the structurally highest portions of the high-P belt have a prograde record identical to that of the ultramafic tectonites. The early emplacement and similar P–T history of host rocks and ultramafic masses suggest that NE New Caledonia preserves a fossil slab/mantle–wedge boundary reactivated during exhumation.

Notes: In the Vizianagaram area (E 83°29.442′; N 18°5.418′) of the Eastern Ghats Belt, India, a suite of graphite-bearing calc-silicate granulites, veined by syenitic rocks, developed wollastonite-rich veins at 6–7 kbar and 〉 850 °C. During subsequent near-isobaric cooling wollastonite was replaced by calcite + quartz and a graphic intergrowth of fluorite + quartz ± clinopyroxene. Titanite with variable Al and F contents is present throughout the rock. Combining the compositional variation of titanite and recent experimental data, it is demonstrated that the mineral assemblage, the composition of coexisting fluids and the mobility of Al exert a far greater control on the composition of titanite than pressure, temperature or the whole rock composition. Thermodynamically computed isothermal–isobaric logfO2– logfCO2 and logfF2– logfO2 grids in the systems Ca–Fe–Si–O–F (CISOF; calcite-free) and Ca–Fe–Si–O–F–C–H (CISOFV; calcite-present) demonstrate the influence of bulk rock and fluid compositions on the stability of the fluorite-bearing assemblages in diverse geological environments and resolve the problem of the stability of titanite in fayalite + fluorite-bearing rocks in the Adirondacks. The mineralogy of the studied rocks and the topological constraints tightly fix the logfO2, logfF2 and logfCO2 at −15.8, −30.6 and 4.1, respectively, at 6.5 kbar and c. 730 °C. Because of the similarity in the P–T conditions, the compositions of pore fluids in the fluorite-bearing assemblages of the Adirondacks and the Eastern Ghats Belt have been compared.

Notes: Within the Albany–Fraser Orogen of southwestern Australia, the Coramup Gneiss is a NE–SW trending zone of high-strain rocks that preserves a detailed record of orogenesis related to Mesoproterozoic convergence of the West Australian and Mawson cratons. New structural, metamorphic and U–Pb SHRIMP zircon age data establish that the Coramup Gneiss underwent high-grade tectonism during both Stage I (c. 1290 Ma) and Stage II (c. 1170 Ma) of the Albany–Fraser Orogeny. Stage I commenced with c. 1300 Ma high-T, low-P M1a metamorphism during extension, and the formation of small-scale ptygmatic folds within a subhorizontal S1a gneissosity. High-P M1b metamorphism at c. 1290 Ma was accompanied by the transposition and shearing of S1a into a composite, shallow SE-dipping S1b foliation, and the development of tight recumbent F1b folds with S1-parallel axial surfaces and asymmetries indicating NW-directed thrusting. The preservation of a similar P–T–time record in the Fraser Complex (NE of the Coramup Gneiss) is consistent with large-scale, NW-directed Stage I thrusting of the Mawson Craton margin over the south-eastern edge of the West Australian Craton. Stage II tectonism in the western Coramup Gneiss involved high-T, low-P M2a metamorphism and the formation of subvertical SE-dipping D2 shear zones, shallow SW-plunging L2 mineral stretching lineations, and NW-verging F2 folds with S2-parallel axial surfaces. A synkinematic pegmatite dyke emplaced into a D2 shear zone yielded a U–Pb SHRIMP zircon age of 1168 ± 12 Ma. Kinematic indicators suggest a combination of pure shear flattening perpendicular to S2, and dextral simple shear. However, contemporaneous structures elsewhere in the Albany–Fraser Orogen are consistent with continued NW–SE convergence at craton-scale during Stage II, and oblique compression in the Coramup Gneiss is attributed to the arcuate geometry of the orogen-scale deformation front.

Notes: Quartz–garnet oxygen isotope thermometry of quartz-rich metasedimentary rocks from the southern Adirondack Highlands (Grenville Province, New York) yields metamorphic temperatures of 700–800 °C, consistent with granulite facies mineral assemblages. Samples from the Irving Pond quartzite record Δ18O(Qtz–Grt) = 2.68 ± 0.21‰ (1 s.d., n = 15), corresponding to peak metamorphic conditions of 734 ± 38 °C. This agrees well with the estimates from garnet–biotite exchange thermometry. Similar temperature estimates are obtained from Swede Pond (682 ± 47 °C, n = 3) and King's Station (c. 700 °C). The Whitehall area records higher temperatures (798 ± 25 °C, n = 3). All of these temperatures are higher than previous regional temperature estimates. The c. 800 °C temperatures near Whitehall are consistent with preservation of pre-granulite contact temperatures adjacent to anorthosite. The preservation of peak metamorphic temperatures in garnet of all sizes is consistent with slow oxygen diffusion in garnet, and closure temperatures of at least 730 °C. Peak metamorphic fractionations are preserved in rocks with varying quartz:feldspar ratios, indicating that the modal percentage of feldspar does not affect retrograde oxygen exchange in these rocks. The lack of this correlation suggests slow rates of oxygen diffusion in quartz and feldspar, consistent with the results of anhydrous oxygen diffusion experiments.

Notes: The Albany–Fraser Orogen in southwestern Australia preserves an important thermo-tectonic record of Australo-Antarctic cratonic assembly during the Mesoproterozoic. New petrologic and thermobarometric data from the Coramup Gneiss (a 10 km wide zone of high strain rocks within the NE-trending eastern Albany–Fraser Orogen) indicate at least two high-grade metamorphic events during 1345–1140 Ma convergence and amalgamation of the West Australian and Mawson cratons. The first event (M1) involved c. 1300 Ma granulite facies metamorphism of the Coramup Gneiss (M1a: 800–850 °C, 5–7 kbar), followed by burial and recrystallization under high-P conditions (M1b: 800–850 °C, c. 10 kbar) prior to high-T decompression (M1c: 700–800 °C, 7–8 kbar) and the 1290–1280 Ma emplacement of Recherche Granite sills. The second event (M2) entailed high-T, low-P metamorphism within dextral D2 shear zones (M2a: 750–800 °C, 5–6 kbar), followed by fluid-present amphibolite facies M2b retrogression. Subsequent sinistral D3 mylonites and pseudotachylites are considered contemporaneous with similar structures in the adjacent Nornalup Complex that postdate the c. 1140 Ma Esperance Granite. Our petrological and thermobarometric data permit two end-member P–T-time relationships between M1 and M2: (1) a single post-M1b event involving continuous M1b–M1c–M2a–M2b cooling and decompression, and (2) a two-stage post-M1b evolution involving M1c metamorphism during the waning stages of an event unrelated causally or temporally to subsequent M2a metamorphism and D2 deformation. In a companion paper, new structural and U–Pb SHRIMP zircon data are presented to support a two-stage P–T evolution for the Coramup Gneiss, with M1 and M2, respectively, reflecting thermo-tectonic activity during Stage I (1345–1260 Ma) and Stage II (1215–1140 Ma) of the Albany–Fraser Orogeny.

Notes: The western Fiordland Orthogneiss (WFO) is an extensive composite metagabbroic to dioritic arc batholith that was emplaced at c. 20–25 km crustal depth into Palaeozoic and Mesozoic gneiss during collision and accretion of the arc with the Mesozoic Pacific Gondwana margin. Sensitive high-resolution ion microprobe U–Pb zircon data from central and northern Fiordland indicate that WFO plutons were emplaced throughout the early Cretaceous (123.6 ± 3.0, 121.8 ± 1.7, 120.0 ± 2.6 and 115.6 ± 2.4 Ma). Emplacement of the WFO synchronous with regional deformation and collisional-style orogenesis is illustrated by (i) coeval ages of a post-D1 dyke (123.6 ± 3.0 Ma) and its host pluton (121.8 ± 1.7 Ma) at Mt Daniel and (ii) coeval ages of pluton emplacement and metamorphism/deformation of proximal paragneiss in George and Doubtful Sounds. The coincidence emplacement and metamorphic ages indicate that the WFO was regionally significant as a heat source for amphibolite to granulite facies metamorphism. The age spectra of detrital zircon populations were characterized for four paragneiss samples. A paragneiss from Doubtful Sound shows a similar age spectrum to other central Fiordland and Westland paragneiss and SE Australian Ordovician sedimentary rocks, with age peaks at 600–500 and 1100–900 Ma, a smaller peak at c. 1400 Ma, and a minor Archean component. Similarly, one sample of the George Sound paragneiss has a significant Palaeozoic to Archean age spectrum, however zircon populations from the George Sound paragneiss are dominated by Permo-Triassic components and thus are markedly different from any of those previously studied in Fiordland.

Notes: Metamorphic zircon from coesite-bearing eclogites in the Dabie Mountains encloses high-P phases, and may have formed at the peak of ultrahigh-pressure (UHP) metamorphism. Morphologically, the metamorphic zircon typically occurs as small, multi-faceted, near-spherical grains with homogeneous internal structure and weak backscattered electron (BSE) luminescence. Geochemically, it is characterized by extremely high and relatively constant contents of hafnium (Hf) and very low contents of Y, U and Th, reflecting the contraction of the zircon lattice under the UHP conditions. High contents of Hf may be characteristic of zircon formed during UHP metamorphism, which has important consequences for interpretation of geochronological results. We propose that the metamorphic zircon extremely enriched in Hf may be used to date the peak of UHP metamorphism that produced the coesite-bearing eclogites in the Dabie Mountains, and potentially in other UHP terranes.

Notes: Inclusion – porphyroblast and porphyroblast – porphyroblast relationships show that abundant albite in mica schists in the Caledonides of the SW Scottish Highlands are part of the Barrovian metamorphic assemblage. Growth early in the D2 deformational phase of porphyroblast cores followed the growth of Mn-rich garnet but preceded the growth of porphyroblasts of the index mineral almandine. Two sets of inclusion trails in the albite correspond to the regionally expressed S1 and S2. Straight trails of muscovite, chlorite, quartz, epidote and the earliest growth of biotite make up S1. Crenulated trails express deformation of S1 early in D2 with muscovite, chlorite, biotite, quartz, epidote and the Mn-rich garnet associated with the development of S2 crenulation cleavage. The geometries of these trails uniquely record early stages of D2 deformational history. An 0−3 growth is related to the temporal coincidence of the formation of S1–S2 crenulation cleavage hinges as favourable sites for nucleation and the release of large amounts of water from prograde reactions during tectonothermal reconstitution of first cycle immature sediments with a volcanic component. The main characteristics of the regionally expressed D2 schistosity were developed during the major grain coarsening that followed both albite and almandine porphyroblast growth. Essentially inclusion-free An 4−19 rims grew on the inclusion-containing cores in the almandine zone in the later stages of schistosity growth and unoriented porphyroblasts of muscovite, biotite and chlorite indicate that mineral growth extended from the later stages of D2 to post-D2. Previous interpretations of the albite porphyroblast growth having been during D4 to post-D4 contemporaneous with retrogression are inconsistent with the microstructural evidence.

Notes: Thermobarometry suggests that ultrahigh-pressure (UHP) to high-pressure (HP) rocks across the Western Gneiss Region ponded at the Moho following as much as 100 km of exhumation through the mantle and before exhumation to the upper crust. Eclogite across the c. 22 000 km2 study area records minimum pressures of c. 8–18 kbar and temperatures of c. 650–780 °C. One orthopyroxene eclogite yields an UHP of c. 28.5 kbar, and evidence of former coesite has been found c. 50 km farther east than previously known. Despite this widespread evidence of UHP to HP, thermobarometry of metapelite and garnet amphibolite samples reveals a surprisingly uniform ‘supra-Barrovian’ amphibolite-facies overprint at c. 11 kbar and c. 650–750 °C across the entire area. Chemical zoning analysis suggests that garnet in these samples grew during heating and decompression, presumably during the amphibolite-facies event. These data indicate that the Norwegian UHP/HP province was exhumed from mantle depths of c. 150 km to lower crustal depths, where it stalled and underwent a profound high-temperature overprint. The ubiquity of late-stage supra-Barrovian metamorphic overprints suggests that large-scale, collisional UHP terranes routinely stall at the continental Moho where diminishing body forces are exceeded by boundary forces. Significant portions of the middle or lower crust worldwide may be formed from UHP terranes that were arrested at the Moho and never underwent their final stage of exhumation.

Notes: Mineral textures, coupled with thermodynamic modelling in the MnO–Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O (MnNCKFMASH) model system, of mid-amphibolite facies metapelites from the Georgetown Inlier, northeast Australia, point to the recording of two separate and unrelated metamorphic events. The first occurred contemporaneously with Palaeo- to Mesoproterozoic orogenesis and involved heating and burial to temperatures and pressures of approximately 600–650 °C and 6.0–7.0 kbar. Textural evidence for the up-temperature (and pressure) prograde part of this path is inferred from the inclusion of garnet in biotite and staurolite. The second metamorphic event resulted in a low-pressure thermal overprint that is equated with the advective addition of heat to the terrane via the emplacement of the Forsayth Batholith (c. 1550 Ma). This event is inferred from subsequent growth of andalusite and randomly orientated fibrolitic sillimanite after garnet, biotite and staurolite. This two stage metamorphic evolution, when coupled with a number of other distinct geological characteristics, suggests that the Georgetown Inlier is dissimilar to the other Australian Palaeoproterozoic terranes with which it is commonly correlated.

Notes: The Qinglongshan eclogites in the Southern Sulu ultrahigh pressure metamorphic (UHPM) terrane show very different retrograded textures from their counterparts in the Northern Sulu terrane, implying a different thermal history. Scanning electron and optical microscope observations indicate that the peak assemblage of the Qinglongshan eclogite is anhydrous, composed of Grt + OmpI + Rt + (Ky + coesite). These primary minerals were replaced by second and third stage minerals, resulting in symplectite pseudomorphs or coronas. The following relationships are inferred: OmpI → OmpII + Ab + Fe-oxide symplectite (type I) and Rt → Rt + Ilm intergrowth; and, Ky → Pg, OmpII (+Pl) → Amp (+Pl) symplectite (type II), and Grt → Prg (+Fe-oxide). Mineral chemistry and mass-balance demonstrate that the pseudomorphed textures were developed by metasomatism involving dissolution and precipitation intensified by fluids along grain boundaries. The formation of symplectite type I produced Fe, Mg and Na but consumed Ca and Si. The Mg and Fe diffused to garnet where exchange of (Mg, Fe) with Ca of the garnet resulted in compositional zonation with decreased Ca towards the edge of garnet grains where Ca was consumed during symplectite formation. The replacement of kyanite by paragonite consumed the extra Na. In the later stage, fluid infiltration partially transformed symplectite type I to type II, and narrow rims of pargasite resorbed garnet from their boundaries. Mass balance suggests that the transformation and resorption would have been coupled during fluid infiltration. In the latest stage, epidote and quartz were precipitated at very late stage as a result of fluid activity along microfractures. Tentative P–T conditions based on mineral reactions and thermocalc software suggest that the retrograded eclogite did not record the granulite facies retrograde evolution characteristic of eclogites from the Northern Sulu terrane. The difference in retrograde evolution between the Southern and Northern Sulu eclogites suggests a different exhumation history.

Notes: Spinel–cordierite symplectites partially replacing andalusite occur in metapelitic rocks within the cores of several country rock diapirs that have ascended into the upper levels of layered mafic/ultramafic rocks in the Bushveld Complex. We investigate the petrogenesis of these symplectites in one of these diapirs, the Phepane dome. Petrographic evidence indicates that at conditions immediately below the solidus the rocks were characterized by a cordierite-, biotite- and K-feldspar-rich matrix and 5–10 mm long andalusite porphyroblasts surrounded by biotite-rich fringes. Phase relations in the MnNCKFMASHT model system constrain the near-solidus prograde path to around 3 kbar and imply that andalusite persisted metastably into the sillimanite + melt field, where the fringing relationship between biotite and andalusite provided spatially restricted equilibrium domains with silica-deficient effective bulk compositions that focused suprasolidus reaction. MnNCKFMASHT pseudosections that model these compositional domains suggest that volatile phase-absent melting reactions consuming andalusite and biotite initially produced a moat of cordierite surrounding andalusite; reaction progressed until all quartz was consumed. Spinel is predicted to grow with cordierite at around 720 °C. Formation of the aluminous solid products was strongly controlled by the receding edge of andalusite grains, with symplectites forming at the andalusite-cordierite moat interface. Decompression due to melt-assisted diapiric rise of the floor rocks into the overlying mafic/ultramafic rocks occurred close to the thermal peak. Re-crossing of the solidus at P = 1.5–2 kbar, T 〉 700 °C resulted in preservation of the symplectites. Two features of the silica-deficient domains inhibited resorption of spinel. First, the cordierite moat armoured the symplectites from reaction with crystallizing melt in the outer part of the pseudomorphs. Second, an up-T step in the solidus at low-P, which may be in excess of 100 °C higher than the quartz-saturated solidus, resulted in high-T crystallization of melt on decompression. Even in metapelitic rocks where melt is retained, preservation of spinel is favoured by decompression.

Notes: Sapphirine, coexisting with quartz, is an indicator mineral for ultrahigh-temperature metamorphism in aluminous rock compositions. Here a new activity-composition model for sapphirine is combined with the internally consistent thermodynamic dataset used by THERMOCALC, for calculations primarily in K2O-FeO-MgO-Al2O3-SiO2-H2O (KFMASH). A discrepancy between published experimentally derived FMAS grids and our calculations is understood with reference to H2O. Published FMAS grids effectively represent constant aH2O sections, thereby limiting their detailed use for the interpretation of mineral reaction textures in compositions with differing H2O.For the calculated KFMASH univariant reaction grid, sapphirine + quartz assemblages occur at P–T in excess of 6–7 kbar and 1005 °C. Sapphirine compositions and composition ranges are consistent with natural examples. However, as many univariant equilibria are typically not ‘seen’ by a specific bulk composition, the univariant reaction grid may reveal little about the detailed topology of multi-variant equilibria, and therefore is of limited use for interpreting the P–T evolution of mineral assemblages and reaction sequences. Calculated pseudosections, which quantify bulk composition and multi-variant equilibria, predict experimentally determined KFMASH mineral assemblages with consistent topology, and also indicate that sapphirine stabilizes at increasingly higher pressure and temperature as XMg increases. Although coexisting sapphirine and quartz can occur in relatively iron-rich rocks if the bulk chemistry is sufficiently aluminous, the P–T window of stability shrinks with decreasing XMg. An array of mineral assemblages and mineral reaction sequences from natural sapphirine + quartz and other rocks from Enderby Land, Antarctica, are reproducible with calculated pseudosections. That consistent phase diagram calculations involving sapphirine can be performed allows for a more thorough assessment of the metamorphic evolution of high-temperature granulite facies terranes than was previously possible. The establishment of a a-x model for sapphirine provides the basis for expansion to larger, more geologically realistic chemical systems (e.g. involving Fe3+).

Notes: Equilibrium pressure–temperature (P–T) conditions were estimated for kyanite-bearing eclogite from Nové Dvory, Czech Republic, by using garnet–clinopyroxene thermometry and garnet–clinopyroxene–kyanite–coesite (or quartz) barometry. The estimated P–T conditions are 1050–1150 °C, 4.5–4.9 GPa, which are mostly the same as previously estimated values for garnet peridotite from Nové Dvory (∼1100–1250 °C, 5–6 GPa). Such very high-P conditions, which correspond to about 150-km depth, have been obtained for some garnet peridotites in the Gföhl Unit of the Bohemian Massif, but pressure conditions of eclogites associated with the garnet peridotites have not been so well constrained. This is the first substantial finding of eclogite that gives such very high-P conditions in the Gföhl Unit of the Bohemian Massif. The Gföhl Unit mainly consists of felsic granulite or migmatitic gneiss, but these rock types do not display high-P (〉2.5 GPa) evidence. It is unclear whether both the peridotite body and surrounding felsic rocks in the Gföhl Unit were buried to very deep levels, but at least some garnet peridotites and associated eclogites in the Gföhl Unit have ascended from about 150-km depth.

Notes: Omphacite and garnet coronas around amphibole occur in amphibolites in the Hong'an area, western Dabie Mountains, China. These amphibolites consist of an epidote–amphibolite facies assemblage of amphibole, garnet, albite, clinozoisite, paragonite, ilmenite and quartz, which is incompletely overprinted by an eclogite facies assemblage of garnet, omphacite and rutile. Coronas around amphibole can be divided into three types: an omphacite corona; a garnet–omphacite–rutile corona; and, a garnet–omphacite corona with less rutile. Chemographic analysis for local reaction domains in combination with petrographical observations show that reactions Amp + Ab + Pg = Omp +Czo + Qtz + H2O, and Amp + Ab = Omp ± Czo + Qtz + H2O may lead to the development of omphacite coronas. The garnet–omphacite–rutile corona was formed from the reaction Amp + Ab + Czo + Ilm ± Qtz = Omp + Grt + Rt + H2O. In garnet–omphacite coronas, the garnet corona grew during an early stage of epidote amphibolite facies metamorphism, whereas omphacite probably formed by the reactions forming the omphacite corona during the eclogite facies stage. It is estimated that these reactions occurred at 0.8–1.4 GPa and 480–610 °C using the garnet–clinopyroxene thermometer and omphacite barometer in the presence of albite.

Notes: A new convenient combinatorial method is developed here to derive the invariant points in multisystem closed nets – the absent phase substitution (APS) method. It substantially simplifies the derivation of the closed nets in multisystems with many components and phases. For the multisystems whose total phase number (NPS) ≤ twice the number of the absent phases (m) in an invariant assemblage, the method can yield regular closed nets with or without globally absent phases; for other multisystems, the method can yield the regular closed nets with globally absent phases. As examples, the APS method was used to predict: (1) the regular closed nets of unary to quinary n + 4-phase multisystems, unary 6-phase multisystem and ternary 8-phase multisystem; (2) the basic properties of the regular closed nets of the quaternary and quinary multisystems with n + 4 and n + 5 phases. Two multisystems were chosen to demonstrate how to select a realistic closed net from the numerous possible closed nets of a complex multisystem, and how to derive a realistic partially closed-net, closed-net-diagram and the related realistic straight-line-net-diagram. Comparisons of our APS method for the derivation of complicated closed nets with other methods indicate that this method is much simpler and more efficient.

Notes: The metapelitic rocks of the Sikkim Himalayas show an inverted metamorphic sequence (IMS) of the complete Barrovian zones from chlorite to sillimanite + K-feldspar, with the higher grade rocks appearing at progressively higher structural levels. Within the IMS, four groups of major planar structures, S1, S2 and S3 were recognised. The S2 structures are pervasive throughout the Barrovian sequence, and are sub-parallel to the metamorphic isograds. The mineral growth in all zones is dominantly syn-S2. The disposition of the metamorphic zones and structural features show that the zones were folded as a northerly plunging antiform. Significant bulk compositional variation, with consequent changes of mineralogy, occurs even at the scale of a thin section in some garnet zone rocks. The results of detailed petrographic and thermobarometric studies of the metapelites along a roughly E–W transect show progressive increase of both pressure and temperature with increasing structural levels in the entire IMS. This is contrary to all models that call for thermal inversion as a possible reason for the origin of the IMS. Also, the observation of the temporal relation between crystallization and S2 structures is problematic for models of post-/late-metamorphic tectonic inversion by recumbent folding or thrusting. A successful model of the IMS should explain the petrological coherence of the Barrovian zones and the close relationship of crystallization in each zone with S2 planar structures along with the observed trend(s) of P–T variation in Sikkim and in other sections. A discussion is presented of some of the available models that, with some modifications, seem to be capable of explaining these observations.

Notes: Evidence is presented of a lateral variation in differential stress during metamorphism along a regional metamorphic belt on the basis of the proportion of microboudinaged piemontite grains (p) in a quartz matrix in metacherts. It is proposed that p is a practical indicator of relative differential stress. Analysis of 123 metacherts from the 800 km long Sambagawa metamorphic belt, Japan, reveals that p-values range from 〈 0.01 to 0.7 in this region. Most samples from Wakayama in the mid-belt area have p-values of 0.4–0.6, whereas those from western Shikoku have p-values of 〈 0.1. This difference cannot be explained by variations in metamorphic temperature, and is instead attributed to a regional, lateral variation in differential stress during metamorphism.

Notes: New (garnet Sm–Nd and Lu–Hf) and existing (Rb–Sr, 40Ar/39Ar, U–Pb and Sm–Nd) ages and data on deformational fabrics and mineral compositions show for the first time that the garnet growth and ductile deformation in the Alpine Schist belt and Southern Alps orogen, New Zealand are diachronous and partly Cenozoic in age. The dominant metamorphic isograds in the Alpine Schist formed during crustal thickening at a previously unsuspected time, at c. 86 Ma, immediately prior to the opening of the Tasman Sea at c. 84–82 Ma. Obvious changes in the textures and compositional zoning patterns of garnet are not always reliable indicators of polymetamorphism, and fabric elements can be highly diachronous.A detailed timing history for the growth of a single garnet is recorded by a Sm–Nd garnet–whole rock age of 97.8 ± 8.1 Ma for the inmost garnet core (zone 1), Lu–Hf ages of 86.2 ± 0.2 Ma and 86.3 ± 0.2 Ma for overgrowth zones 2 and 3, a step-leach Sm–Nd age of 12 ± 37 Ma for zone 4, and growth of the garnet rim (zone 5) over the Alpine Fault mylonite foliation during the modern phase of oblique collision that began at c. 5–6 Ma.Plate convergence along the New Zealand portion of the Gondwana margin continued after c. 105 Ma, almost certainly culminating in the oblique collision of a large oceanic plateau (Hikurangi Plateau). The metamorphism of the Alpine Schist at c. 86 Ma is evidence of that hit. The mid- to late-Cretaceous extension that is widespread elsewhere in the New Zealand region is attributed to upper plate extension and slab roll-back. The effects of the collision with the Hikurangi Plateau may have contributed to the changing plate motions in the region leading up to the opening of the Tasman Sea at c. 82 Ma.

Notes: The exhumation of eclogite facies granulites (Omp–Plg–Grt–Qtz–Rt) in the Rychleby Mts, eastern Czech Republic, was a localised process initiated by buckling of crustal layers in a thickened orogenic root. Folding and post-buckle flattening was followed by the main stage of exhumation that is characterized by vertical ductile extrusion. This process is documented by structural data, and the vertical ascent of rocks from a depth of c. 70 to c. 35 km is documented by metamorphic petrology. SHRIMP 206Pb/238U and 207Pb/206Pb evaporation zircon ages of 342 ± 5 and 341.4 ± 0.7 Ma date peak metamorphic conditions. The next stage of exhumation was associated with sideways flat thrusting associated with lateral viscous spreading of granulites and surrounding rocks over indenting adjacent continental crust at a depth of c. 35–30 km. This stage was associated with syntectonic intrusion of a granodiorite sill at 345–339 Ma, emplaced at a crustal depth of c. 25 km. The time required for cooling of the sill as well as for heating of the country rocks brackets this event to a maximum of 250 000 years. Therefore, similar ages of crystallization for the granodiorite magma and the peak of eclogite facies metamorphism of the granulite suggest a very short period of exhumation, limited by the analytical errors of the dating methods. Our calculations suggest that the initial exhumation rate during vertical extrusion was 3–15 mm yr−1, followed by an exhumation rate of 24–40 mm yr−1 during further uplift along a magma-lubricated shear zone. The extrusion stage of exhumation was associated with a high cooling rate, which decreased during the stage of lateral spreading.

Notes: In the Sikkim region of north-east India, the Main Central Thrust (MCT) juxtaposes high-grade gneisses of the Greater Himalayan Crystallines over lower-grade slates, phyllites and schists of the Lesser Himalaya Formation. Inverted metamorphism characterizes rocks that immediately underlie the thrust, and the large-scale South Tibet Detachment System (STDS) bounds the northern side of the Greater Himalayan Crystallines. In situ Th–Pb monazite ages indicate that the MCT shear zone in the Sikkim region was active at c. 22, 14–15 and 12–10 Ma, whereas zircon and monazite ages from a slightly deformed horizon of a High Himalayan leucogranite within the STDS suggest normal slip activity at c. 17 and 14–15 Ma. Although average monazite ages decrease towards structurally lower levels of the MCT shear zone, individual results do not follow a progressive younging pattern. Lesser Himalaya sample KBP1062A records monazite crystallization from 11.5 ± 0.2 to 12.2 ± 0.1 Ma and peak conditions of 610 ± 25 °C and 7.5 ± 0.5 kbar, whereas, in the MCT shear zone rock CHG14103, monazite crystallized from 13.8 ± 0.5 to 11.9 ± 0.3 Ma at lower grade conditions of 525 ± 25 °C and 6 ± 1 kbar. The P–T–t results indicate that the shear zone experienced a complicated slip history, and have implications for the understanding of mid-crustal extrusion and the role of out-of-sequence thrusts in convergent plate tectonic settings.

Notes: A combined metamorphic and isotopic study of lit-par-lit migmatites exposed in the hanging wall of the Main Central Thrust (MCT) from Sikkim has provided a unique insight into the pressure–temperature–time path of the High Himalayan Crystalline Series of the eastern Himalaya. The petrology and geochemistry of one such migmatite indicates that the leucosome comprises a crystallized peraluminous granite coexisting with sillimanite and alkali feldspar. Large garnet crystals (2–3 mm across) are strongly zoned and grew initially within the kyanite stability field. The melanosome is a biotite–garnet pelitic gneiss, with fibrolitic sillimanite resulting from polymorphic inversion of kyanite. By combining garnet zoning profiles with the NaCaMnKFMASHTO pseudosection appropriate to the bulk composition of a migmatite retrieved from c. 1 km above the thrust zone, it has been established that early garnet formed at pressures of 10–12 kbar, and that subsequent decompression caused the rock to enter the melt field at c. 8 kbar and c. 750 °C, generating peritectic sillimanite and alkali feldspar by the incongruent melting of muscovite. Continuing exhumation resulted in resorption of garnet. Sm–Nd growth ages of garnet cores and rim, indicate pre-decompression garnet growth at 23 ± 3 Ma and near-peak temperatures during melting at 16 ± 2 Ma. This provides a decompression rate of 2 ± 1 mm yr−1 that is consistent with exhumation rates inferred from mineral cooling ages from the eastern Himalaya. Simple 1D thermal modelling confirms that exhumation at this rate would result in a near-isothermal decompression path, a result that is supported by the phase relations in both the melanosome and leucosome components of the migmatite. Results from this study suggest that anatexis of Miocene granite protoliths from the Himalaya was a consequence of rapid decompression, probably in response to movement on the MCT and on the South Tibetan detachment to the north.

Notes: High-pressure (HP) metabasites from the Sancti Spiritus dome (Escambray massif, Central Cuba) have been studied in order to better understand the origin and evolution of the Northern Caribbean boundary plate during the Cretaceous, in a global subduction context. Geochemical and petrological studies of these eclogites reveal two groups with contrasting origins and pre-subduction metamorphic histories. Eclogites collected from exotic blocks within serpentinite (mélange zone) originated from a N-MORB type protolith, do not record pre-eclogitic metamorphic history. Conversely eclogites intercalated in Jurassic metasedimentary rocks (non-mélange zone) have a calc-alkaline arc-like origin and yield evidence for a pre-subduction metamorphic event in the amphibolite facies. However, all the studied Escambray eclogites underwent the same eclogitic peak (around 600 °C at 16 kbar), and followed a cold thermal gradient during their exhumation (estimated at around 13.5 °C km−1), which can suggest that this exhumation was coeval with subduction. Concordant geochronological data (Rb/Sr and Ar/Ar) support that the main exhumation of HP/LT rocks from the Sancti Spiritus dome occurred at 70 Ma by top to SW thrusting. The retrograde trajectory of these rocks suggests that the north-east subduction of the Farallon plate continued after 70 Ma. The set-off to the exhumation can be correlated with the beginning of the collision between the Bahamas platform and the Cretaceous island arc that induced a change of the subduction kinematics. The contrasting origin and ante-subduction history of the analysed samples imply that the Escambray massif consists of different geological units that evolved in different environments before their amalgamation during exhumation to form the present unit III of the massif.

Notes: Interpretations based on quantitative phase diagrams in the system CaO–Na2O–K2O–TiO2–MnO–FeO–MgO–Al2O3–SiO2–H2O indicate that mineral assemblages, zonations and microstructures observed in migmatitic rocks from the Beit Bridge Complex (Messina area, Limpopo Belt) formed along a clockwise P–T path. That path displays a prograde P–T increase from 600 °C/7.0 kbar to 780 °C/9–10 kbar (pressure peak) and 820 °C/8 kbar (thermal peak), followed by a P–T decrease to 600 °C/4 kbar. The data used to construct the P–T path were derived from three samples of migmatitic gneiss from a restricted area, each of which has a distinct bulk composition: (1) a K, Al-rich garnet–biotite–cordierite–sillimanite–K-feldspar–plagioclase–quartz–graphite gneiss (2) a K-poor, Al-rich garnet–biotite–staurolite–cordierite–kyanite–sillimanite–plagioclase–quartz–rutile gneiss, and (3) a K, Al-poor, Fe-rich garnet–orthopyroxene–biotite–chlorite–plagioclase–quartz–rutile–ilmenite gneiss. Preservation of continuous prograde garnet growth zonation demonstrates that the pro- and retrograde P–T evolution of the gneisses must have been rapid, occurring during a single orogenic cycle. These petrological findings in combination with existing geochronological and structural data show that granulite facies metamorphism of the Beit Bridge metasedimentary rocks resulted from an orogenic event during the Palaeoproterozoic (c. 2.0 Ga), caused by oblique collision between the Kaapvaal and Zimbabwe Cratons. Abbreviations follow Kretz (1983).

Notes: In the lower main unit of the Attic-Cycladic crystalline belt (Greece), white mica geochronology (Rb–Sr, K–Ar, 40Ar–39Ar) has established the timing of at least two metamorphic events: well-preserved high-pressure/low-temperature (HP/LT) rocks yielded Eocene ages (c. 53–40 Ma) and their greenschist facies counterparts provided Oligocene–Miocene dates (c. 25–18 Ma). Marbles from Tinos Island contain high-Si phengite with Rb–Sr (phengite–calcite) and 40Ar–39Ar white mica ages between 41 and 24 Ma. All Ar age spectra are disturbed and 40Ar–39Ar total fusion ages generally are 3–6 Ma older than corresponding Rb–Sr ages. Due to the polymetamorphic history, we consider inheritance from the HP stage as the most likely cause for the complex Ar age spectra and the older 40Ar–39Ar dates. This concept also suggests that the Rb–Sr system is more sensitive to modification during overprinting than the Ar isotope system, because resetting of the Sr isotope system can be accomplished more quickly by Sr exchange with other Ca-rich phases, whereas lack of pervasive deformation and/or restricted availability of synmetamorphic fluids has favoured partial inheritance of the Ar isotope system. On Tinos, the lowermost part of the metamorphic succession has experienced a pervasive greenschist facies overprint. Si-rich phengite from marbles representing this lithostratigraphic level yielded Rb–Sr ages of c. 24 Ma. If the earlier metamorphic history is not taken into account, such data sets may lead to the erroneous conclusion of Miocene HP metamorphism. This study indicates that this phengite experienced pervasive rejuvenation of the Rb–Sr isotope system during overprinting, without significant changes in Si content, due to bulk-compositional constraints. This leads to the conclusion that in the absence of critical mineral assemblages the Si value of phengite is not a reliable indicator for metamorphic pressures in impure marbles. Recent studies have reported large displacements (〉100 km) for detachment faults in the Aegean Sea. A critical parameter for such models is the age of HP metamorphism as deduced from white mica dating in the basal units of the Cyclades. We question the underlying idea of Miocene HP metamorphism and suggest, instead, that this age constrains the timing of the greenschist facies overprint and that the existence of mega-detachments in the study area requires further investigation.

Notes: Under contact metamorphic conditions, carbonate rocks in the direct vicinity of the Adamello pluton reflect a temperature-induced grain coarsening. Despite this large-scale trend, a considerable grain size scatter occurs on the outcrop-scale indicating local influence of second-order effects such as thermal perturbations, fluid flow and second-phase particles. Second-phase particles, whose sizes range from nano- to the micron-scale, induce the most pronounced data scatter resulting in grain sizes too small by up to a factor of 10, compared with theoretical grain growth in a pure system. Such values are restricted to relatively impure samples consisting of up to 10 vol.% micron-scale second-phase particles, or to samples containing a large number of nano-scale particles. The obtained data set suggests that the second phases induce a temperature-controlled reduction on calcite grain growth. The mean calcite grain size can therefore be expressed in the form D = C2 eQ*/RT(dp/fp)m*, where C2 is a constant, Q* is an activation energy, T the temperature and m* the exponent of the ratio dp/fp, i.e. of the average size of the second phases divided by their volume fraction. However, more data are needed to obtain reliable values for C2 and Q*. Besides variations in the average grain size, the presence of second-phase particles generates crystal size distribution (CSD) shapes characterized by lognormal distributions, which differ from the Gaussian-type distributions of the pure samples. In contrast, fluid-enhanced grain growth does not change the shape of the CSDs, but due to enhanced transport properties, the average grain sizes increase by a factor of 2 and the variance of the distribution increases. Stable δ18O and δ13C isotope ratios in fluid-affected zones only deviate slightly from the host rock values, suggesting low fluid/rock ratios. Grain growth modelling indicates that the fluid-induced grain size variations can develop within several ka. As inferred from a combination of thermal and grain growth modelling, dykes with widths of up to 1 m have only a restricted influence on grain size deviations smaller than a factor of 1.1. To summarize, considerable grain size variations of up to one order of magnitude can locally result from second-order effects. Such effects require special attention when comparing experimentally derived grain growth kinetics with field studies.

Notes: Metapelitic rocks in the low pressure contact metamorphic aureole around the Susqueda igneous complex, Spain show a number of features that make them an ideal testing ground for the modelling of silica-undersaturated melting. Rocks in the aureole experienced localized depletion in silica by the segregation of quartz veins during a pre-anatectic, regional cordierite-andalusite grade metamorphic event. These rocks were then intruded by gabbroic to dioritic rocks of the Susqueda igneous complex that formed a migmatitic contact metamorphic aureole in the country rocks. This migmatisation event caused quartz-saturated hornfels and restite formation in rocks that had experienced no quartz vein segregation in the previous regional metamorphic event, but silica-undersaturated melting in those rocks that were previously depleted in silica. Silica-undersaturated melting is investigated using a new petrogenetic P–T projection and equilibrium pseudosections calculated in the KFMASH and NCKFMASH systems, respectively. The grid considers quartz absent equilibria and a range of phases that form typically in silica-undersaturated bulk compositions, for example corundum. It is shown that the quartz-rich precursors in the Susqueda contact aureole produced about 10% melt during contact metamorphism. However, most of this melt was extracted leaving behind rocks with restitic bulk compositions and minor leucosome segregation. It is suggested that the melt mixed with the host igneous rocks causing an apparent magmatic zoning from diorite in the centre of the complex to tonalite at the margins. In contrast, the quartz-poor precursors (from which the quartz veins segregated) melted in the silica-undersaturated field producing a range of assemblages including peritectic corundum and spinel. Melting of the silica-undersaturated rocks produced only negligible melt and no subsequent melt loss.

Notes: Petrogenetic grids in the KFMASH and KMnFMASH model systems calculated with the software thermocalc 3.1 are presented for the P–T range 0.5–12 kbar and 450–900 °C, for assemblages involving garnet, muscovite, chloritoid, biotite, chlorite, staurolite, cordierite, spinel, orthopyroxene, K-feldspar, Al2SiO5 phases, quartz, water and melt. Based on calculated compatibility diagrams and P–T and T–MMn [Mn/(Mg + Fe + Mn)] pseudosections for different metapelitic bulk compositions, the principal conclusions are that the addition of Mn to the KFMASH system: (i) enhances the stability of garnet, and, to a lesser extent, aluminosilicates; (ii) reduces the stability of staurolite, cordierite and, to a lesser extent, chlorite; and (iii) extends the medium pressure stability of muscovite and the low-P stability field of K-feldspar. The influence of Mn on individual mineral stabilities is strongly related to rock composition, in particular, to the relative contents of Al2O3 and K2O. For metapelites of a range of compositions and MMn values, P–T pseudosections in the KFMASH system, in most cases, do not adequately predict the mineral assemblages observed in natural assemblages under medium and low-pressure conditions. In contrast, the P–T pseudosections in the KMnFMASH system generally provide more satisfactory results, suggesting that MnO is one of the non-KFMASH components that should not be neglected in documenting the phase equilibria of medium- and low-P metapelites.

Notes: The timing of high-pressure (HP) metamorphism in the internal basement massifs of the Western Alps has been contentious. In the Gran Paradiso massif silvery micaschists, thought to have developed from granitic precursors, contain assemblages indicative of pressures in excess of 18 kbar at 500–550 °C. This paper presents unique geochronological data for the paragenesis of the silvery micaschist HP assemblage. Rb–Sr microsampling of an apatite–phengite pair thought to have remained closed to Rb–Sr exchange since the HP paragenesis formed has yielded an age of 43.0 ± 0.5 Ma. Greenschist retrogression occurred after 36.3 ± 0.4 Ma, probably in the interval 36–34 Ma. The localised disturbance of the Rb–Sr system in phengite, apatite and allanite during retrogression means that only in situ microsampling could obtain meaningful ages from these rocks. The new data indicating a Tertiary age for HP metamorphism in the Gran Paradiso massif agree with recent data for other internal basement massifs in the Western Alps. A model fitting the Gran Paradiso massif into the Western Alpine framework is presented.

Notes: Laser Raman spectroscopy and cathodoluminescence (CL) images reveal that most zircon separated from paragneiss and orthogneiss in drillhole CCSD-PP2 at Donghai, south-western Sulu terrane, retain low-P mineral-bearing inherited cores, ultrahigh-pressure (UHP) mineral-bearing mantles and low-P mineral-bearing (e.g. quartz) rims. SHRIMP U–Pb analyses of these zoned zircon identify three discrete and meaningful age groups: Proterozoic protolith ages (〉 680 Ma) are recorded in the inherited cores, the UHP metamorphic event in the coesite-bearing mantles occurred at 231 ± 4 Ma, and the late amphibolite facies retrogressive overprint in the quartz-bearing rims was at 211 ± 4 Ma. Thus, Neoproterozoic supracrustal protoliths of the Sulu UHP rocks were subducted to mantle depths in the Middle Triassic, and exhumed to mid-crustal levels in the Late Triassic. The exhumation rate deduced from the SHRIMP data and metamorphic P–T conditions is 5.0 km Ma−1. Exhumation of the Sulu UHP terrane may have resulted from buoyancy forces after slab break-off at mantle depths.

Notes: Early Palaeozoic kyanite–staurolite-bearing epidote–amphibolites including foliated epidote–amphibolite (FEA), and nonfoliated leucocratic or melanocratic metagabbros (LMG, MMG), occur in the Fuko Pass metacumulate unit (FPM) of the Oeyama belt, SW Japan. Microtextural relationships and mineral chemistry define three metamorphic stages: relict granulite facies metamorphism (M1), high-P (HP) epidote–amphibolite facies metamorphism (M2), and retrogression (M3). M1 is preserved as relict Al-rich diopside (up to 8.5 wt.% Al2O3) and pseudomorphs after spinel and plagioclase in the MMG, suggesting a medium-P granulite facies condition (0.8–1.3 GPa at 〉 850 °C). An unusually low-variance M2 assemblage, Hbl + Czo + Ky ± St + Pg + Rt ± Ab ± Crn, occurs in the matrix of all rock types. The presence of relict plagioclase inclusions in M2 kyanite associated with clinozoisite indicates a hydration reaction to form the kyanite-bearing M2 assemblage during cooling. The corundum-bearing phase equilibria constrain a qualitative metamorphic P–T condition of 1.1–1.9 GPa at 550–800 °C for M2. The M2 minerals were locally replaced by M3 margarite, paragonite, plagioclase and/or chlorite. The breakdown of M2 kyanite to produce the M3 assemblage at 〈 0.5 GPa and 450–500 °C suggests a greenschist facies overprint during decompression. The P–T evolution of the FPM may represent subduction of an oceanic plateau with a granulite facies lower crust and subsequent exhumation in a Pacific-type orogen.

Notes: The Greiner shear zone in the Tauern Window, Eastern Alps, changes from a zone of distributed (dominantly sinistral) shear in supracrustal rocks to a series of narrow, gully forming dextral splays where it enters basement gneisses. Within these splays, granodiorite is transformed into quartz-poor biotite and/or chlorite schists, reflecting hydration, removal of Si, Ca and Na, and concentration of Fe, Mg and Al. Stable isotope analyses show a prominent increase in δD and a decrease in δ18O from granodiorite into the shear zones. These changes indicate significant channelized flow of an externally derived, low-δ18O, high-δD fluid through the shear zones. The shear zone schists are chemically similar to blackwall zones developed around serpentinite bodies elsewhere in the Greiner zone and the stable isotope data support alteration via serpentinite-derived fluid. Monazite in schist from one shear zone yields spot dates of 29–20 Ma, indicating that the fluid influx and switch from sinistral to dextral shear occurred at or shortly after the thermal peak of the Alpine orogeny (c. 30 Ma). We suggest that Alpine metamorphism of serpentinites released large amounts of high-δD, low-δ18O, Si-undersaturated, Fe + Mg-saturated fluids that became channelized along prior zones of weakness in the granodiorite. Infiltration of this fluid facilitated growth of chlorite and biotite, which in turn localized later dextral strain in the narrow splays via cleavage-parallel slip. This dextral strain event can be linked to other structures that accommodated tectonic escape of major crustal blocks during dextral transpression in the Eastern Alps. This study shows that serpentinite devolatilization can play an important role in modifying both the chemistry and rheology of surrounding rocks during orogenesis.

Notes: Large garnet poikiloblasts hosted by leucosome in metapelitic gneiss from Broken Hill reflect complex mineral–melt relationships. The spatial relationship between the leucosomes and the garnet poikiloblasts implies that the growth of garnet was strongly linked to the production of melt. The apparent difficulty of garnet to nucleate a large number of grains during the prograde breakdown of coexisting biotite and sillimanite led to the spatial focussing of melting reactions around the few garnet nuclei that formed. Continued reaction of biotite and sillimanite required diffusion of elements from where minerals were reacting to sites of garnet growth. This diffusion was driven by chemical potential gradients between garnet-bearing and garnet-absent parts of the rock. As a consequence, melt and peritectic K-feldspar also preferentially formed around the garnet. The diffusion of elements led to the chemical partitioning of the rock within an overall context in which equilibrium may have been approached. Thus, the garnet-bearing leucosomes record in situ melt formation around garnet porphyroblasts rather than centimetre-scale physical melt migration and segregation. The near complete preservation of the high-grade assemblages in the mesosome and leucosome is consistent with substantial melt loss. Interconnected networks between garnet-rich leucosomes provide the most likely pathway for melt migration. Decimetre-scale, coarse-grained, garnet-poor leucosomes may represent areas of melt flux through a large-scale melt transfer network.

Notes: A linear relationship exists between the mean volume of garnet porphyroblasts and the squared inverse of mean matrix grain diameter for six samples of garnetiferous mica quartzite with identical thermal histories and similar mineralogy and modes. This relationship accords with theoretical predictions of the dependence of intergranular diffusive fluxes on the volume fraction of grain edges that function as diffusional pathways during porphyroblast growth. The impact of matrix grain size is large: compared to a rock with a 1-mm matrix, a rock with a 10-μm matrix would experience rates of diffusion-controlled porphyroblast growth that are 10 000 times faster, and characteristic length scales for chemical equilibration that are 100 times larger. Precursor grain sizes may therefore exert a major influence on crystallization kinetics. If matrix coarsening occurs during prograde reaction, a decrease in the volume fraction of diffusional pathways will tend to counteract the exponential thermal increase in diffusive fluxes. The impact of such matrix grain growth, although difficult to assess without firm knowledge of coarsening rates in polymineralic aggregates, might be significant for matrices finer than c. 100 μm at temperatures above c. 500–600 °C, but is likely negligible for coarser grain sizes and lower temperatures.

Notes: In the Transangarian region of the Yenisey Ridge in eastern Siberia (Russia), Fe- and Al-rich metapelitic schists of the Korda plate show field and petrological evidence of two superimposed metamorphic events. An early middle Proterozoic event with age of c.1100 Ma produced low-pressure, andalusite-bearing assemblages at c. 3.5–4 kbar and 540–560 °C. During a subsequent late Proterozoic event at c. 850 Ma, a medium-pressure, regional metamorphic overprint produced kyanite-bearing mineral assemblages that replaced minerals formed in the low-pressure event. Based on the results of geothermobarometry and P–T path calculations it can be shown that pressure increased from 4.5 to 6.7 kbar at a relatively constant temperature of 540–600 °C towards a major suture zone called the Panimba thrust. In order to produce such nearly isothermal loading of 1–7 °C km −1, we propose a model for the tectono-metamorphic evolution of the study area based on crustal thickening caused by south-westward thrusting of the 5–7 km-thick upper-plate metacarbonates over lower-plate metapelites with velocity of c. 350 m Myr−1. A small temperature increase (up to 20 ± 15 °C) of the upper part of the overlapped plate is explained by specific behaviour of steady-state geotherms calculated using lower radioactive heat production of metacarbonates as compared with metapelites. The suggested thermal-mechanical model corresponds well with P–T paths inferred from obtained thermobarometric data and correlates satisfactorily with P–T trajectories predicted by other two-dimensional thermal models for different crustal thickening and exhumation histories.

Notes: Geothermometry of eclogites and other high pressure (HP)/ultrahigh-pressure (UHP) rocks has been a challenge, due to severe problems related to the reliability of the garnet–clinopyroxene Fe–Mg exchange thermometer to omphacite-bearing assemblages. Likewise, reliable geobarometers for eclogites and related HP/UHP rocks are scarce. In this paper, a set of internally consistent geothermobarometric expressions have been formulated for reactions between the UHP assemblage garnet–clinopyroxene–kyanite–phengite–coesite, and the corresponding HP assemblage garnet–clinopyroxene–kyanite–phengite–quartz. In the system KCMASH, the end members grossular (Grs) and pyrope (Prp) in garnet, diopside (Di) in clinopyroxene, muscovite (Ms) and celadonite (Cel) in phengite together with kyanite and coesite or quartz define invariant points in the coesite and quartz stability field, respectively, depending on which SiO2 polymorph is stable. Thus, a set of net transfer reactions including these end members will uniquely define equilibrium temperatures and pressures for phengite–kyanite–SiO2-bearing eclogites. Application to relevant eclogites from various localities worldwide show good consistency with petrographic evidence. Eclogites containing either coesite or polycrystalline quartz after coesite all plot within the coesite stability field, while typical quartz-bearing eclogites with no evidence of former coesite fall within the quartz stability field. Diamondiferous coesite–kyanite eclogite and grospydite xenoliths in kimberlites all fall into the diamond stability field. The present method also yields consistent values as compared with the garnet–clinopyroxene Fe–Mg geothermometer for these kinds of rocks, but also indicates some unsystematic scatter of the latter thermometer. The net transfer geothermobarometric method presented in this paper is suggested to be less affected by later thermal re-equilibration than common cation exchange thermometers.

Notes: Pods of granulite facies dioritic gneiss in the Pembroke Valley, Milford Sound, New Zealand, preserve peritectic garnet surrounded by trondhjemitic leucosome and vein networks, that are evidence of high-P partial melting. Garnet-bearing trondhjemitic veins extend into host gabbroic gneiss, where they are spatially linked with the recrystallization of comparatively low-P two-pyroxene-hornblende granulite to fine-grained high-P garnet granulite assemblages in garnet reaction zones. New data acquired using a Laser Ablation Inductively Coupled Plasma Mass Spectrometer (LA-ICPMS) for minerals in various textural settings indicate differences in the partitioning of trace elements in the transition of the two rock types to garnet granulite, mostly due to the presence or absence of clinozoisite. Garnet in the garnet reaction zone (gabbroic gneiss) has a distinct trace element pattern, inherited from reactant gabbroic gneiss hornblende. Peritectic garnet in the dioritic gneiss and garnet in trondhjemitic veins from the Pembroke Granulite have trace element patterns inherited from the melt-producing reaction in the dioritic gneiss. The distinct trace element patterns of garnet link the trondhjemitic veins geochemically to sites of partial melting in the dioritic gneiss.

Notes: Book reviewed in this article: Trees, crops and soil fertility: concepts and research methods. By G. Schroth and F.I. Sinclair (Editors).

Notes: Abstract. Current tillage erosion models account for the influence of tillage direction in the magnitude of the soil transport coefficient. It is argued that a re-modelling of tillage erosion is preferable in which the influence of tillage direction is separated from the soil transport coefficient, which is a measure of tillage intensity. This has been achieved here by developing a two-dimensional tillage erosion model that incorporates tillage direction in the measure of slope and uses soil transport coefficients that are independent of tillage direction and based on relationships between transport and the slope in the direction that bisects tillage direction and the overturning direction. Mean tillage erosion, associated with a single pair of opposing tillage directions and pair of overturning directions, can be described by a two-dimensional diffusion-type equation if the dimensions are defined as the tillage direction and the direction perpendicular to tillage. Application of the model to a real-world case allows quantification of the potential soil conservation benefits associated with optimization of tillage direction. The scope for amelioration is related to the ratio between the coefficients for transport in the direction of tillage and perpendicular to tillage. As this ratio approaches unity, the potential for amelioration reduces towards zero. For the study site investigated, use of the experimentally derived ratio of 0.66 indicated that a 12% reduction in tillage erosion could be obtained by ploughing across the dominant field slope as compared to ploughing up and down the dominant slope. For an implement with a coefficient ratio of 0.2 the reduction in tillage erosion intensity, associated with optimizing the tillage direction, reaches 28%. Nevertheless, such benefits must be considered in the context of other management considerations. The tillage direction that minimizes erosion is associated with lateral slopes of 10°, or more, over 20% of the field. To the land-user this disadvantage may outweigh the soil conservation benefits.

Notes: Abstract. Efforts to understand the fate of organochlorine compounds in arable soil have concentrated on anthropogenic compounds, in spite of the fact that organochlorine compounds are both produced and mineralized in soil through natural processes. In order to understand the fate of chlorinated pesticides, it is necessary to take account of the natural chlorine cycle. The present study is a first attempt to illuminate the relationship between the natural chlorine cycle and agricultural practices. The concentration and storage of organic chlorine (Clorg) and chloride (Clinorg) were determined in topsoil of a paddy field compared to an adjacent afforested hill at a sampling site in the Meicun area, Anhui Province, China. The concentration of Clorg, as well as the chlorine-to-carbon ratio, was significantly lower in the paddy field samples than in the forest soil samples. A weak relationship between the concentration of Clorg and the organic carbon content was observed in the paddy field, in contrast to the observations made in the adjacent forest soil as well as those made in previous studies, which have suggested a positive correlation between organic carbon content and Clorg. The similarity between our results at the forest site and the previous studies, which have been carried out in temperate regions, suggests that it is the land use rather than the climate that makes the current paddy soil results different. Our results suggest that the contribution of Clorg to the paddy soil from above-ground litter and from production within the soil are small or negligible compared with the contribution from pesticide application and wet and dry deposition.

Notes: Abstract. Vineyards in Champagne, France are generally situated on slopes where the soils are subject to erosion. Therefore it is important to find a soil-surface management practice that protects the soil against water erosion. We assessed the potential of mulches or grass covers to stabilize soil aggregates in a calcareous sandy loam from a vineyard in Champagne after 9 years under different management systems. Four different treatments were studied: (i) a bluegrass (Poa pratensis) surface cover between the vine rows (GC) with bare soil under the vines (R); two organic mulches of (ii) coniferous (CB) or (iii) poplar (PB) bark that covered the entire soil surface, and (iv) bare soil between the rows as a control. The bark amendments were applied every 3 years at rates of 61 and 67 t ha−1 for the PB and CB treatments, respectively. The kinetics of soil disaggregation in water fitted a power law (A=K t−D), in which K was the fraction of water-stable 〉200 μm aggregates remaining after 1 hour of wet-sieving. In the 0–5 cm layer, aggregate stability was greater for GC (K=21.7), CB (K=15.2) and PB (K=13.6) than for the control (K=10.5) and R (K=11.8). In the 0–20 cm layer, CB also stabilized soil aggregates (K=14.0–15.0); but PB did not. Structural stability was more strongly related to total organic carbon (R2=0.64, P 〈0.001) than to microbial biomass carbon (R2=0.54, P〈0.001). A bluegrass cover enhanced structural stability in the 0–5 cm and 0–20 cm layers (K=14.2), probably because of intense root development and rhizodeposition enhancing microbially produced metabolites, such as carbohydrates. Establishing grass cover or applying bark mulch are effective agricultural practices that improve soil aggregate stability and thus should reduce soil erosion. The vegetative growth of the vines was greater on the soils amended with bark mulches and less on the grass covered soils compared with the control soil; however, no difference in wine quality was observed among the different treatments.

Notes: Abstract. Salt affected soil is one of the main problems decreasing the productivity of irrigated agriculture in the Mediterranean area. Simulation models in combination with geographical information systems (GISs) could be used to evaluate the risk of salinization at a regional scale. In this study, two logical models (Pla and Riverside) were combined in a GIS to evaluate the risk of soil salinity and sodicity in the irrigated agriculture of the Valencian Community, Spain. Simple models were chosen so that they could be used at a regional scale. Before running them in a GIS framework, a soil and irrigation water survey was conducted to validate the models with observed data. The Pla model fitted observed data better than Riverside guidelines, probably because parameters of water quality, soil and climate were considered by the Pla model. The resulting maps indicated that the soils most affected by salts are those located in the south of study area, owing to the arid climate, and those areas near the coast due to saline intrusion. Close to 42% of the irrigated area was predicted to be somewhat affected by salinization. The regional-scale soil salinity assessment presented here for the Valencian Community is the first to be made for this region and will be useful in targeting critical areas that may require special management.

Notes: Abstract. Over a 10-year period, runoff and soil erosion on the plots of the Woburn Erosion Reference Experiment were concentrated in periods with sparse vegetation cover: in winter after the late planting of cereals; in spring after the planting of beets; or when soils were bare after harvest. The mean event runoff of 1.32 mm from plots cultivated up-and-downslope was significantly greater (P〈0.05) than that from plots cultivated across-slope (0.82 mm). However, mean event soil loss was not significantly different between the two cultivation directions. No significant differences were found between minimal and standard cultivations. Mean event runoff from the across-slope/minimal tillage treatment combination (0.58 mm) was significantly less (P〈0.01) than from the up-and-downslope/minimal tillage (1.41 mm), up-and-downslope/standard tillage (1.24 mm), and across-slope/standard tillage (1.07 mm) treatment combinations. Runoff from the across-slope/standard treatment combination was significantly (P〈0.05) less than from the up-and-downslope/minimal tillage treatment. The across-slope/minimal tillage treatment combination had a significantly smaller (P〈0.05) event soil loss (67 kg ha−1) than the up-and-downslope/standard tillage (278 kg ha−1) and up-and-downslope/minimal tillage (245 kg ha−1) combinations. Crop yields were significantly (P〈0.05) higher on across-slope plots in 1988, 1996 and 1997 than on up-and-downslope plots, and were also higher (but not significantly) on the across-slope plots in 7 of the 8 remaining years. Minimal cultivation decreased yield compared with standard cultivation in one year only. We recommend that across-slope cultivation combined with minimal tillage be investigated at field scale to assess its suitability for incorporation into UK farming systems.

Notes: Abstract. Three successive crops of winter wheat were grown on a sandy loam to test the residual effect of long-term annual incorporation of spring barley straw at rates of 0, 4, 8 and 12 t ha−1, and ryegrass catch crops with or without additions of pig slurry. Soil receiving 4, 8 and 12 t ha−1 of straw annually for 18 years contained 12, 21 and 30% more carbon (C), respectively, than soil with straw removal, and soil C and nitrogen (N) contents increased linearly with straw rate. The soil retained 14% of the straw C and 37% of the straw N. Ryegrass catch-cropping for 10 years also increased soil C and N concentrations, whereas the effect of pig slurry was insignificant. Grain yield in the first wheat crop showed an average dry matter (DM) increase of 0.7 t ha−1 after treatment with 8 and 12 t straw ha−1. In the two subsequent wheat crops, grain yield increased by 0.2–0.3 t DM ha−1 after 8 and 12 t straw ha−1. No grain yield increases were found after 4 t straw ha−1 in any of the three years. Previous ryegrass catch crops increased yields of wheat grain, but effects in the third wheat crop were significant only where ryegrass had been combined with pig slurry. Straw incorporation increased the N offtake in the first wheat crop. In the second crop, only 8 and 12 t straw ha−1 improved wheat N offtake, while the N offtake in the third wheat crop was unaffected. Ryegrass catch crops increased N offtake in the first and second wheat crop. Again, a positive effect in the third crop was seen only when ryegrass was combined with slurry. Long-term, annual incorporation of straw and ryegrass catch crops provided a clear and relatively persistent increase in soil organic matter levels, whereas the positive effects on the yield of subsequent wheat crops were modest and transient.

Notes: Abstract. Net accumulation of organic nitrogen in soil is constrained by the amount of organic matter and its minimum C:N ratio. Our objective was to estimate the potential for New Zealand soils to continue accumulating nitrogen within the soil organic pool. We calculated total carbon and nitrogen in the top metre of 138 representative soil profiles from the New Zealand National Soils Database. Carbon in these mainly pasture soils was assumed to be at steady state. The maximum nitrogen storage capacity was estimated by calculating the amount of nitrogen stored under assumed minimum soil C:N ratios of either 9, 10 or 11. The storage capacity remaining was determined as the difference between the amount of nitrogen currently stored and the maximum storage capacity. The length of time before a soil profile will reach the maximum capacity for nitrogen storage was calculated assuming net accumulation of 20, 50 and 100 kg N ha−1 yr−1. A C:N ratio of 9 (giving most storage capacity) and a conservative accumulation rate of 20 kg N ha−1 yr−1 showed that 12% of these soils would be at maximum storage within 40 years. A C:N ratio of 10 and a storage rate of 50 kg N ha−1 yr−1 would result in 54% of the soils reaching maximum storage within the next 40 years. As the capacity for nitrogen storage in soils declines, nitrate leaching is likely to increase with associated risk to the environment.

Notes: Abstract. We studied the effects of red deer grazing and fence-line pacing on soil losses of contaminants (suspended sediment, Escherichia coli, phosphorus) and nitrogen species (ammonia, nitrate) via overland flow and soil physical properties (macroporosity, bulk density, saturated hydraulic conductivity, Ksat) soon after (1 day) and 6 weeks after grazing on a Pallic pastoral soil in southern New Zealand. Fence-line pacing decreased the soil volume occupied by water, macroporosity and Ksat, while increasing suspended sediment (to 0.226 g 100 mL−1), total P (to 2.0 mg L−1), mainly as particulate P (up to 90% of total P), and E. coli (to 3.52 log10 c.f.u. 100 mL−1) concentrations in overland flow at 1 day after grazing compared with soils from the rest of the paddock (0.148 g 100 mL−1, 0.86 mg L−1 and 2.86 log10 c.f.u. 100 mL−1, respectively). Although concentrations in overland flow were less at 6 weeks after grazing than at 1 day after grazing, losses of P, especially in fence-line soils, were still above recommended limits for surface water quality. Compared to P, losses of N species would be unlikely to have a significant impact on downstream water quality. Management strategies should be directed towards minimizing the occurrence of fence-line pacing to prevent contaminant loss and maintain water and soil quality.

Notes: Abstract. Agricultural practices in the UK have come under increased scrutiny since the heavy and widespread flooding of 2000 and 2001. Although the impact of land use on runoff and flood risk is of growing concern, there are few quantitative data available. A preliminary study was undertaken in the Nant Pontbren catchment, mid-Wales. Experimental tree shelterbelts were established in selected pastures of land used for sheep grazing. Water infiltration rates were up to 60 times higher in areas planted with young trees than in adjacent grazed pastures. This demonstrates that farm trees could represent a key landscape feature, reducing run-off even when only present as a small proportion of the land cover. This is likely to be just one of the environmental and economic benefits of planting trees to re-create a more diverse agricultural landscape.

Notes: Abstract. Nitrate is widely and mistakenly perceived to threaten human health by causing methaemoglobinaemia in infants and stomach cancer in adults, but it does cause environmental problems. Methaemoglobinaemia is a side-effect of gastroenteritis and is not caused by nitrate but by nitric oxide, which is produced in a defensive reaction stimulated by gastroenteritis. The latter may be caused by a bacterium or a virus. The association of methaemoglobinaemia with nitrate may have arisen because early cases of the condition were often associated with wells polluted with bacteria, and the same pollution increased the nitrate concentration. Four epidemiological studies sought a link between stomach cancer and nitrate but did not find one. The incidence of this cancer has also declined during the last 30 years, while nitrate concentrations in water have increased. Nitrate preserves, rather than threatens, health. It is reduced by microbes on the tongue to nitrite, which generates nitric oxide when acidified in an antibacterial defence mechanism vital to our well-being. This mechanism acts with great effectiveness in the stomach against Salmonella, Escherichia coli and other organisms that cause gastroenteritis. It also acts in our mouths against dental caries and even on our skin against fungal pathogens such as Tinea pedis (athlete's foot). This mechanism is the basis of the centuries-old practice of adding nitrate or nitrite to stored meat to protect against botulism, caused by the most lethal toxin known to mankind.

Notes: Abstract. Results from recent studies of peatland biogeochemistry suggest that appropriate soil water sampling techniques are required in order to advance our understanding of peatland soil systems. In a comparative field experiment, concentrations of inorganic solutes and dissolved organic carbon (DOC) were measured in soil water extracted at a depth of 10 cm beneath the surface of deep peat by three techniques: zero-tension (z-t) lysimeters, PTFE suction samplers, and polysulfone suction samplers. The majority of solute concentrations were broadly similar, but mean concentrations of silicon, DOC, iron and aluminium in water extracted by z-t lysimeters and PTFE samplers were in ratios of 1:5; 1:2; 1:5 and 1:3 respectively. Mean conductivity and concentrations of chloride and hydrogen ion were significantly larger in the z-t lysimeter samples, which had sodium, potassium and magnesium to chloride ratios that were very similar to local rainfall. The z-t lysimeters appeared to sample macropores preferentially, while the suction samplers collected micropore water.

Notes: Book reviewed in this article: Scaling methods in soil physics. By Y. Pachepsky, D.E. Radcliffe and H. Magdi Selim (Editors).

Notes: Abstract. Tendency to crust is a potentially useful index for assessing soil degradation and for assisting land use planning in South Africa. In this study, the influence of land use, geology and vegetation cover on the tendency of soil to form a surface crust was investigated in six vegetation types. Crusting at all sites was greater in exposed soils than soils under vegetation, as determined by infiltration rate, water dispersible clay and modulus of rupture. In Renosterveld, crusting was markedly greater in exposed soil than vegetation covered soil (mean infiltration 16 vs 44 mm h−1; dispersible clay 2.6 vs 2.2%; modulus of rupture 121 vs 64 kPa). Greater crusting in exposed soil was attributed to lower soluble salt and labile carbon (C) contents and an associated increase in the dispersion of clay. In Karoo, crusting of exposed, shale-derived soils was greater than that of exposed, dolerite-derived soils (infiltration 40 vs 83 mm h−1; dispersible clay 2 vs 1.2%), and a similar pattern was evident in Tall Grassveld (infiltration 18 vs 36 mm h−1; dispersible clay 1.2 vs 0.9%; modulus of rupture 31 vs 21 kPa). In Upland Grassland, cultivation of maize and rye enhanced crusting. In Thicket, crusting was greater in soils from open, degraded vegetation than intact, densely wooded sites (infiltration 19 vs 51 mm h−1; modulus of rupture 16 vs 34 kPa), probably due to lower content of soil C. In Bushveld, crusting was greater in annually burnt plots than unburnt plots (infiltration 109 vs 163 mm h−1; dispersible clay 0.9 vs 0.6% on granite-derived soils; and infiltration 56 vs 72 mm h−1; dispersible clay 1.5 vs 1.3% on basalt-derived soils). Greater crusting of soil from burnt plots was ascribed to a reduction in soil C and soluble salts as well as a greater exchangeable sodium percentage.

Notes: Abstract. The volcanic island of Lanzarote (Canary Islands, Spain) is one of the most arid parts of the European Union. During the eruptions of 1730–36, a third of the island was covered with lava and pyroclastic material. In areas under basaltic tephra, an agrosystem has been developed that allows a form of dry farming that has become a key component of the local economy. This article illustrates the effectiveness of the layer of natural tephra mulch in conserving soil and water.

Notes: Abstract. Land use change and land management practices affect the net emissions of the trace gases methane (CH4) and nitrous oxide (N2O), as well as carbon sources and sinks. Changes in CH4 and N2O emissions can substantially alter the overall greenhouse gas balance of a system. Drainage of peatlands for agriculture or forestry generally increases N2O emission as well as that of CO2, but also decreases CH4 emission. Intermittent drainage or late flooding of rice paddies can greatly diminish the seasonal emission of CH4 compared with continuous flooding. Changes in N2O emissions following land use change from forest or grassland to agriculture vary between climatic zones, and the net impact varies with time. In many soils, the increase in carbon sequestration by adopting no-till systems may be largely negated by associated increases in N2O emission. The promotion of carbon credits for the no-till system before we have better quantification of its net greenhouse gas balance is naïve. Applying nitrogen fertilizers to forests could increase the forest carbon sink, but may be accompanied by a net increase in N2O; conversely, adding lime to acid forest soils can decrease the N2O emission.

Notes: Abstract. This article examines some of the factors that influence the relative risk of Escherichia coli pollution of surface waters from grazing animals compared to cattle slurry application. Drainage water from pipe-drained plots grazed with sheep (16 sheep + lambs per hectare) from 29 May to 17 July 2002 had average E. coli counts of 11 c.f.u. mL−1 or 0.4% of estimated E. coli inputs over the grazing period. Drainage water from plots on the same site treated with cattle slurry (36 m3ha−1 on 29 May 2002) had lower average E. coli counts of 5 c.f.u. mL−1 or 0.03% of estimated faecal input. Sheep (16 lambs per hectare) grazing under cooler, moister conditions from 24 September to 3 December 2001 gave drainage water with much higher average E. coli counts of 282 c.f.u. mL−1 or 8.2% of estimated input, which is more than twice the average E. coli counts previously reported under such conditions (Vinten et al. 2002 Soil Use and Management 18, 1–9). Laboratory studies of runoff from soil slabs after slurry application showed that the mobility of E. coli in surface soil decreased with time, suggesting that increased attachment to soil or migration to ‘immobile’ water also provides at least part of the physical explanation for the relatively higher risk of pollution from grazing animals compared with slurry. Sampling for E. coli in field drainflow and in streamwater during a storm event in the predominantly dairy Cessnock Water catchment, Ayrshire, Scotland supported the hypothesis that E. coli transport is linked to grazing animals. For a 7-mm rainfall event, roughly 14% of the estimated daily input from grazing livestock was transported to the river, even though little slurry spreading had occurred in the catchment in the previous month. Spot sampling of field drains in grazed fields and silage fields in the same catchment also showed that grazing animals were the principal source of E. coli and faecal streptococci.

Notes: Abstract. Four management systems combining high and low livestock densities (0.7 and 1.4 livestock units ha−1) and different types of organic manure (slurry and straw based FYM) were applied to an organic dairy crop rotation (undersown barley – grass–clover – grass–clover – barley/pea – oats – fodder beet) between 1998 and 2001. The effects of the management systems on crop yields and nitrate leaching were measured. In all four years, nitrate leaching, as determined using ceramic suction cups, was higher in the three crops following ploughing of grass–clover than under the barley or grass–clover. Overall, no significant differences in nitrate leaching were observed between the management systems. However, the replacement of the winter wheat crop used in the earlier experimental period (1994–97) by spring oats with catch crops in both the preceding and succeeding winters reduced nitrate leaching compared with the earlier rotation. Increasing the livestock density, which increased manure application by c. 60 kg total N ha−1, increased crop yields by 7 and 9% on average for FYM and slurry, respectively. Yields were 3–5% lower where FYM was used instead of slurry. The experiment confirmed the overriding importance of grassland N management, particularly the cultivation of the ley, in organic dairy crop rotations.

Notes: Abstract. The effects of grazed, annual ryegrass pasture (annually tilled with a rotary cultivator) and permanent kikuyu pasture were compared with that of undisturbed native vegetation at four sites in the Tsitsikamma region, South Africa. Soil organic carbon content, aggregate stability, saturated hydraulic conductivity, air permeability, root length density and rooting depth were all less under ryegrass than kikuyu pasture. There was, however, no consistent effect of pasture-type on pore size distribution or penetrometer resistance. Differences in penetrometer resistance were most obvious in the 10–30 cm layer with subsurface compaction being evident at some sites under both types of pasture. This was attributed to the treading effects of grazing cattle plus formation of a compacted layer at the depth of tillage under ryegrass pastures. Subsoil tillage of a ryegrass pasture resulted in a substantial reduction in penetrometer resistance in the compacted 10–20 cm layer and increases in hydraulic conductivity, air permeability, root length density and rooting depth. We conclude that conversion from conventional to zero tillage is a potential way of improving the sustainability of annual pasture production and that the extent of subsoil compaction under both pasture types needs further investigation.

Notes: Abstract. Grassland is a major source of nitrous oxide (N2O) and methane (CH4) emissions in the UK, resulting from high rates of fertilizer application. We studied the effects of substituting mineral fertilizer by organic manures and a slow-release fertilizer in silage grass production on greenhouse gas emissions and soil mineral N content in a three-year field experiment. The organic manures investigated were sewage sludge pellets and composted sewage sludge (dry materials), and digested sewage sludge and cattle slurry (liquid materials). The organic manures produced N2O and carbon dioxide (CO2) consistently from time of application up to harvest. However, they mitigated N2O emissions by around 90% when aggregate emissions of 15.7 kg N ha−1 from NPK fertilizer were caused by a flux of up to 4.9 kg N ha−1 d−1 during the first 4 days after heavy rainfall subsequent to the NPK fertilizer application. CH4 was emitted only for 2 or 3 days after application of the liquid manures. CH4 and CO2 fluxes were not significantly mitigated. Composting and dried pellets were useful methods of conserving nutrients in organic wastes, enabling slow and sustained release of nitrogen. NPK slow-release fertilizer also maintained grass yields and was the most effective substitute for the conventional NPK fertilizer for mitigation of N2O fluxes.

Notes: Abstract. Calibration coefficients for a Diviner 2000 capacitance sensor were developed under laboratory conditions for soils of six textures. The calibration equations, derived by regression analysis, significantly (P 〈0.001) related Diviner 2000 measurements of scaled frequency (SF) with volumetric soil water content of the soil. In all cases the calibration accounted for 〉93% of the variation (R2 adjusted) with the volumetric water content of the soil.

Notes: Abstract. Fertilizer applications to agricultural land are a significant source of ammonia (NH3) emission to the atmosphere, accounting for approximately 10% of the total emissions from agriculture. Current estimates of emissions from fertilizer applications use ‘fixed’ emission factors. This paper describes a model in which the emission factors are expressed as a function of the important influencing variables: fertilizer type, soil pH, land use, application rate, rainfall and temperature. Total emission in 2002 for the UK were estimated by running the model for a ’standard UK‘ scenario, viz. 28.7 kt NH3-N, which compares well with the UK inventory estimate of 30.4 kt NH3-N. Differences exist in the estimates for specific fertilizer types, with the mean emission factor for urea applications to grassland, in particular, being lower by use of this model (13% compared with 23% of applied N for the UK inventory). Emission estimates were most sensitive to temperature and fertilizer type. Scenario testing showed that significant reductions in emission could be achieved by replacing urea with other forms of N fertilizer, by combining urea use with a urease inhibitor, or by modifying some management practices.

Notes: Abstract. In organic farming systems, fertilizing materials can be used when potassium (K) deficiency is shown, but such systems are dominantly nitrogen (N) limited and this is likely to affect crop utilization of K. The supply of K to grass/clover from a range of mineral and organically based K fertilizers and its interaction with N supply were studied in a greenhouse experiment. Sequential plant cuts were taken for yield and nutrient content determinations in crop and soil. Crop yields were limited by N: where N supply was increased either through the mineralization of N from organic materials (rapemeal, farmyard manure) or inorganic fertilizer, plant yields increased significantly. Grass/clover responded better to additional K where sufficient N was available. However, yield responses to K were generally small, even in the presence of adequate N. Of the different fertilizers, kali and MSL-K increased yields above those of the control by less than 5%, sylvinite, DKSI and farmyard manure by 10–20%, and rapemeal and potassium sulphate by more than 25%. In all treatments, K offtakes in the grass/clover were considerably greater than fertilizer K inputs. The grass/clover showed an increased uptake of Na where insufficient K was available. However, the Mg content of the grass/clover was not adversely affected by K fertilizer application. Organic farmers need to consider the soil K status, the rotational nutrient budget, the supply of all nutrients in fertilizing materials and nutrient interactions to achieve effective K management in organic farming systems.

Notes: Abstract. A laboratory experiment was designed to assess the impact of surface seal development on the hydrological response of a clay soil. The influence of surface sealing on vertical macropore flow and lateral throughflow was of particular interest. The extent and development of the surface seal in repacked lysimeters was designed to match that recorded over two growing seasons at a clay field site in Essex, and was not extensive enough to reduce significantly the infiltration capacity of the soil. Consequently, the hydrological response of the lysimeters was similar under sealed and unsealed conditions, with a more rapid wetting response under sealed conditions being attributed to the higher soil moisture content required to create the surface seal. Macropore flow was initiated at the A/B soil boundary of the lysimeters, in response to the development of a saturated layer. The rate of macropore and throughflow in the soil was dictated by rainfall intensity at the soil surface as this controlled the depth of water in the perched water table. Simulation of the tensiometer response in the lysimeters demonstrated that it was possible to attribute the rapid movement of water through the A horizon to water displacement processes alone, without recourse to preferential flow processes.

Notes: Abstract. The behaviour of potassium (K) in a range of arable soils was examined by plotting the change in exchangeable K of the topsoil (Δ Kex) at the end of a 3–5 year period against the K balance over the same period (fertilizer K applied minus offtake in crops, estimated from farmers' records of yield and straw removal). Based on the assumption that values for offtake per tonne of crop yield used for UK arable crops MAFF 2000) are valid averages, 10–50% of Δ Kex was explained by the balance, relationships being stronger on shallow/stony soils. Excess fertilizer tended to increase Kex and reduced fertilization decreased it, requiring between 1.2 and 5.4 kg K ha−1 for each mg L−1Δ Kex. However, merely to prevent Kex falling required an extra 20 kg K ha−1 yr−1 fertilizer on Chalk soils and soils formed in the overlying Tertiary and Quaternary deposits, despite clay contents 〉18%. Whereas, on older geological materials, medium soils needed no extra K and clays gained 17 kg K ha−1 yr−1. It is unlikely that the apparent losses on some soil types are anomalies due to greater crop K contents. Theory and the literature suggest leaching from the topsoil as a major factor; accumulation in the subsoil was not measured. Recommendations for K fertilization of UK soils might be improved by including loss or gain corrections for certain soil types.

Notes: Abstract. The saline–sodic soils of the dryland Songnen Plain in northeast China are only slowly permeable to fresh water because of their large content of montmorillinite clay and sodium bicarbonate. Use of slightly saline groundwater containing adequate dissolved calcium and magnesium for leaching and reclamation can potentially prevent dispersion of the clay soil particles during treatment. Amelioration was evaluated using shallow, mildly saline groundwater to irrigate sorghum–corn rotations in a two-year field experiment. After two growing seasons during which a total of 400 mm of leaching water was applied, in addition to some supplemental irrigation water, the average electrical conductivity (ECe) of the top 1.2 m of the soil profile decreased from 14.5±3.5 to 2.7±0.2 dS m−1, and the sodium absorption ratio (SARe) decreased from 35.3±4.1 to 10.1±2.5 (meq L−1)0.5. The soil physical properties were improved: infiltration rate with mildly saline groundwater increased from 12.1 to 42 mm h−1. Salinity changes in the top 1.2 m of soil layers after 700 mm of leaching produced no further improvement. Crop yields produced on plots undergoing amelioration increased by 64–562% compared with the rainfed control. The improved soil conditions after leaching resulted in 59–548% greater crop yields.

Notes: Abstract. Drainage water was sampled intensively during a four-year field experiment on a sandy loam soil subjected to four unreplicated tillage treatments: (1) harrowing with a springtine harrow, drilling; (2) direct drilling; (3) ploughing with light subsurface compaction, one pass with a PTO-driven rotary harrow, drilling; (4) ploughing, one pass with a springtine harrow, drilling. In all years, the losses of suspended matter with drainage water (0.1–4.3 kg ha−1 yr−1) were smaller by a factor of 1.9 or more from direct drilled plots than from plots subjected to the other tillage treatments, strongly suggesting that tillage increased the losses. Annual bromide losses were governed by the amount of drainage water rather than by the tillage treatments. However, after one drainage season, more bromide was left in the soil at 0–100 cm depth with ploughless tillage than with ploughing, thus indicating more bypass flow without ploughing. The study demonstrated very changeable patterns of suspended matter and bromide concentrations in drainage water sampled from large field plots, and questions the representativeness of drainage water samples for water reaching the subsoil or shallow groundwater.