ALBERT

Description: Native chilies (Capsicum spp.) are currently underutilized in Bolivia, one of this crop’s centers of diversity. Fewer local farmers cultivate native chilies annually due to low market demand. Increasing its private use value can lead to the in-situ conservation of this crop. The objective of the paper is to evaluate the market acceptability of three native chili products: (a) chili marmalade; (b) chili cooking paste; and (c) pickled chilies. Multi-product Becker-DeGroot-Marschak experimental auctions and hedonic tests were conducted with 337 participants in La Paz and Santa Cruz. Data were analyzed using seemingly unrelated regressions. Results suggest that consumers are willing to pay price premiums of about 25–50 percent. Biodiversity conservation and improvements in farmers’ quality of life statements would not have influence on first purchase decisions but rather on repurchase decisions and therefore on consumers’ product loyalty. This in turn could lead to sustainable agro-biodiversity conservation, centered on consumers’ purchase of these products over time.

Description: This study proposes a new concept, green organisational ambidexterity, that integrates green exploration learning and green exploitation learning simultaneously. Besides, this study argues that the antecedents of green organisational ambidexterity are green shared vision and green absorptive capacity and its consequents are green radical innovation performance and green incremental innovation performance. The results demonstrate that green exploration learning partially mediates the positive relationships between green radical innovation performance and its two antecedents—green shared vision and green absorptive capacity. In addition, this study indicates that green exploitation learning partially mediates the positive relationships between green incremental innovation performance and its two antecedents—green shared vision and green absorptive capacity. Hence, firms have to increase their green shared vision, green absorptive capacity, and green organisational ambidexterity to raise their green radical innovation performance and green incremental innovation performance.

Description: Gel polymer electrolytes (GPEs) are developed using poly(1-vinylpyrrolidone-co-vinyl acetate) [P(VP-co-VAc)] as the host polymer, lithium bis(trifluoromethane) sulfonimide [LiTFSI] as the lithium salt and ionic liquid, and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide [EMImTFSI] by using solution casting technique. The effect of ionic liquid on ionic conductivity is studied and the optimum ionic conductivity at room temperature is found to be 2.14 × 10−6 S cm−1 for sample containing 25 wt% of EMImTFSI. The temperature dependence of ionic conductivity from 303 K to 353 K exhibits Arrhenius plot behaviour. The thermal stability of the polymer electrolyte system is studied by using thermogravimetric analysis (TGA) while the structural and morphological properties of the polymer electrolyte is studied by using Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction analysis (XRD), respectively.

Description: Antimetastatic and anti-inflammatory activities of Ocimum sanctum essential oil (OSEO) have been assessed in this study. OSEO at the concentration of 250 μg/mL and above showed a significant () decrease in the number of migrated cancer cells. In addition, OSEO at concentration of 250 μg/mL and above suppressed MMP-9 activity in lipopolysaccharide (LPS) induced inflammatory cells. A dose-dependent downregulation of MMP-9 expression was observed with the treatment of OSEO compared to the control. Our findings indicate that OSEO has both antimetastatic and anti-inflammatory potentials, advocating further investigation for clinical applications in the treatment of inflammation associated cancer.

Description: The development of a deep wound infection in the presence of internal hardware presents a clinical dilemma. The purpose of the present study was to evaluate the treatment outcomes of vancomycin cement with other advances of surgical techniques for implant-related infection (IRI) in the tibia. This study included 217 consecutive patients who had sustained IRI of the tibia. Of them, 152 patients had soft tissue defects and the internal hardware was exposed. Repeated debridement and negative pressure assisted closure were used. All the infected internal hardware was removed. External fixations and flaps were used. Custom-made vancomycin cement was inserted into the dead space of the wounds and left in site for a month. The follow-up was from 12 months to 108 months, averaging 37.5 months. For all the 217 patients, the general osteomyelitis healing rate and bone union rate were 86.6% and 97.2%, respectively. This study shows high rates of healing of IRI in the tibia if the new advances of surgery could be effectively combined into the treatment strategy with vancomycin cement as an important treatment.

Description: In order to screen the Catalpa plant with high antioxidant activity and confirm the corresponding active fractions from Catalpa ovata G. Don, C. fargesii Bur., and C. bungei C. A. Mey., total flavonoid contents and antioxidant activities of the extracts/fractions of Catalpa plant leaves were determined. The determined total flavonoid content and antioxidant activity were used as assessment criteria. Those compounds with antioxidant activity were isolated with silica gel column chromatography and ODS column chromatography. Our results showed that the total flavonoid content in C. bungei C. A. Mey. (30.07 mg/g·DW) was the highest, followed by those in C. fargesii Bur. (25.55 mg/g·DW) and C. ovata G. Don (24.96 mg/g·DW). According to the determination results of total flavonoid content and antioxidant activity in 3 clones of leaves of C. bungei C. A. Mey., the total flavonoid content and antioxidant activity in crude extracts from C. bungei C. A. Mey. 6 (CA6) leaves were the highest. Moreover, the results showed that the total flavonoid content and antioxidant activities of ethyl acetate (EA) fraction in ethanol crude extracts in CA6 leaves were the highest, followed by n-butanol, petroleum ether (PE), and water fractions. Two flavonoid compounds with antioxidant activity were firstly isolated based on EA fraction. The two compounds were luteolin (1) and apigenin (2), respectively.

Description: Leishmaniasis is a vector-borne disease transmitted by phlebotomine sand fly. Susceptibility and refractoriness to Leishmania depend on the outcome of multiple interactions that take place within the sand fly gut. Promastigote attachment to sand fly midgut epithelium is essential to avoid being excreted together with the digested blood meal. Promastigote and gut sand fly surface glycans are important ligands in this attachment. The purpose of the present study was to evaluate the interaction of three lectins isolated from leguminous seeds (Diocleinae subtribe), D-glucose and D-mannose-binding, with glycans on Lutzomyia migonei midgut. To study this interaction the lectins were labeled with FITC and a fluorescence assay was performed. The results showed that only Dioclea violacea lectin (DVL) was able to interact with midgut glycans, unlike Cratylia floribunda lectin (CFL) and Canavalia gladiata lectin (CGL). Furthermore, when DVL was blocked with D-mannose the interaction was inhibited. Differences of spatial arrangement of residues and volume of carbohydrate recognition domain (CRD) may be the cause of the fine specificity of DVL for glycans in the surface on Lu. migonei midgut. The findings in this study showed the presence of glycans in the midgut with glucose/mannose residues in its composition and these residues may be important in interaction between Lu. migonei midgut and Leishmania.

Description: Background. The primary purpose of this study was to investigate adult-child caregiver burden in heart failure (HF) patients. Secondary purpose of the study was to identify the possible influencing factors for caregiver burden and depressive symptoms in a young adult-child caregiver group. Methods. A total of 138 adult-child caregivers and 138 patients with HF participated in this study. Caregivers’ burden, depressive symptoms, and anxiety levels were assessed by using Zarit Caregiver Burden Scale (ZCBS), Beck Depression Inventory, and State-Trait Anxiety Inventory, respectively. Results. The mean ZCBS scores of the female caregivers were significantly higher than male caregivers. Approximately one-third of the adult-child caregivers had at least mild depressive symptoms. Caregivers with higher depressive symptoms had higher levels of caregiver burden. There were positive correlations between caregiving time, severity of depressive symptoms, and perceived caregiver burden. There was a negative correlation between education level of caregivers and perceived caregiver burden. Age, socioeconomic level, and marital status of patients were affecting factors for depressive symptoms in caregivers. Among caregiver characteristics, gender, marital status, and ZCBS scores seem to influence the depression in caregivers. Conclusions. The study findings suggest significant levels of burden and depressive symptoms even in adult-child caregivers of HF patients.

Description: Cladribine is a purine nucleoside analog which initiates the apoptotic mechanism within cells. Moreover, the available data confirms that cladribine, with the participation of the p53 protein, as well as the proapoptotic proteins from the Bcl-2 family, also induces the activation of the intrinsic apoptosis pathway. However, while there has been a lot of research devoted to the effect of cladribine on lymphatic system cells, little is known about the impact of cladribine on the reproductive system. The aim of our study was to evaluate apoptosis in oviduct epithelial cells sourced from 15 different female rats. In so doing, the sections were stained with caspases 3, 9, and 8. Results suggest that cladribine also induces apoptosis in the oviduct epithelial cells by way of the intrinsic pathway. Indeed, the discontinuing of the administration of cladribine leads to a reduction in the amount of apoptotic cells in the oviduct epithelium.

Description: This paper presents a sensor fusion system of cameras and a 2D laser sensorfor large-scale 3D reconstruction. The proposed system is designed to capture data on afast-moving ground vehicle. The system consists of six cameras and one 2D laser sensor,and they are synchronized by a hardware trigger. Reconstruction of 3D structures is doneby estimating frame-by-frame motion and accumulating vertical laser scans, as in previousworks. However, our approach does not assume near 2D motion, but estimates free motion(including absolute scale) in 3D space using both laser data and image features. In orderto avoid the degeneration associated with typical three-point algorithms, we present a newalgorithm that selects 3D points from two frames captured by multiple cameras. The problemof error accumulation is solved by loop closing, not by GPS. The experimental resultsshow that the estimated path is successfully overlaid on the satellite images, such that thereconstruction result is very accurate.

Description: The proliferation of mobile smart devices has led to a rapid increase of location-based services, many of which are amassing large datasets of user trajectory information. Unfortunately, current trajectory information is not yet sufficiently rich to support classification of user transportation modes. In this paper, we propose a method that employs both the Global Positioning System and accelerometer data from smart devices to classify user outdoor transportation modes. The classified modes include walking, bicycling, and motorized transport, in addition to the motionless (stationary) state, for which we provide new depth analysis. In our classification, stationary mode has two sub-modes: stay (remaining in the same place for a prolonged time period; e.g., in a parked vehicle) and wait (remaining at a location for a short period; e.g., waiting at a red traffic light). These two sub-modes present different semantics for data mining applications. We use support vector machines with parameters that are optimized for pattern recognition. In addition, we employ ant colony optimization to reduce the dimension of features and analyze their relative importance. The resulting classification system achieves an accuracy rate of 96.31% when applied to a dataset obtained from 18 mobile users.

Description: Gamma radiation induces the generation of free radicals, leading to serious cellular damages in biological systems. Radioprotectors act as prophylactic agents that are administered to shield normal cells and tissues from the deleterious effects of radiation. Melatonin synergistically acts as an immune-stimulator and antioxidant. We investigated the possible radioprotective role of melatonin (100 mg/kg i.p.) against lethal-whole-body radiation- (10 Gy) induced sickness, body weight loss, and mortality in rats. Results of the present study suggest that exposure to lethal-whole-body radiation incurred mortality, body weight loss, and apoptosis and it also depleted the immunity and the antioxidant status of the rats. Our results show that melatonin pretreatment provides protection against radiation induced mortality, oxidative stress, and immune-suppression. The melatonin pretreated irradiated rats showed less change in body weight as compared to radiation only group. On the other hand, melatonin appeared to have another radioprotective role, suggesting that melatonin may reduce apoptosis through a caspase-3-mediated pathway by blocking caspase-3 activity.

Description: For many years, ultrasound has provided clinicians with an affordable and effective imaging tool for applications ranging from cardiology to obstetrics. Development of microbubble contrast agents over the past several decades has enabled ultrasound to distinguish between blood flow and surrounding tissue. Current clinical practices using microbubble contrast agents rely heavily on user training to evaluate degree of localized perfusion. Advances in separating the signals produced from contrast agents versus surrounding tissue backscatter provide unique opportunities for specialized sensors designed to image microbubbles with higher signal to noise and resolution than previously possible. In this review article, we describe the background principles and recent developments of ultrasound transducer technology for receiving signals produced by contrast agents while rejecting signals arising from soft tissue. This approach relies on transmitting at a low-frequency and receiving microbubble harmonic signals at frequencies many times higher than the transmitted frequency. Design and fabrication of dual-frequency transducers and the extension of recent developments in transducer technology for dual-frequency harmonic imaging are discussed.

Description: In this paper, a new low complexity and lossless image compression system for capsule endoscopy (CE) is presented. The compressor consists of a low-cost YEF color space converter and variable-length predictive with a combination of Golomb-Rice and unary encoding. All these components have been heavily optimized for low-power and low-cost and lossless in nature. As a result, the entire compression system does not incur any loss of image information. Unlike transform based algorithms, the compressor can be interfaced with commercial image sensors which send pixel data in raster-scan fashion that eliminates the need of having large buffer memory. The compression algorithm is capable to work with white light imaging (WLI) and narrow band imaging (NBI) with average compression ratio of 78% and 84% respectively. Finally, a complete capsule endoscopy system is developed on a single, low-power, 65-nm field programmable gate arrays (FPGA) chip. The prototype is developed using circular PCBs having a diameter of 16 mm. Several in-vivo and ex-vivo trials using pig's intestine have been conducted using the prototype to validate the performance of the proposed lossless compression algorithm. The results show that, compared with all other existing works, the proposed algorithm offers a solution to wireless capsule endoscopy with lossless and yet acceptable level of compression.

Description: A reflection fiber inclinometer is proposed and experimentally demonstrated based on two linearly polarized (LP) modes coupling. The configuration consists of a section of polarization-maintaining fiber (PMF) containing a fiber Bragg grating (FBG) splicing with single mode fiber (SMF). Bending the PMF in the upstream of FBG can induce an additional birefringence of PMF, which results in the intensity changes of two LP modes owing to orthogonal polarization coupling. The experimental results represent that the device shows different bending responses at the angle range from 0° to 40°and from 64° to 88°, respectively. Moreover, the temperature change just shifts the wavelengths of LP modes reflected and does not influence their intensities, which effectively avoid the temperature cross-sensitivity and make it a good candidate for measuring inclinometer and temperature simultaneously.

Description: Biological invasions of aquatic systems disrupt ecological communities, and cause major changes in diversity and ecosystem function. The Laurentian Great Lakes of North America have been dramatically altered by such invasions, especially zebra (Dreissena polymorpha) and quagga (D. rostriformis bugensis) mussels. Responses to mussel invasions have included increased water clarity, and decreased chlorophyll and phytoplankton abundance. Although not all systems have responded similarly, in general, mussels have changed nutrient dynamics and physical habitat conditions. Therefore examination of different impacts can help us further understand mechanisms that underlie ecosystem responses to biological invasions. To aid our understanding of ecosystem impacts, we sampled established locations along a well-studied trophic gradient in Green Bay, Lake Michigan, after the 1993 zebra mussel invasion. A strong trophic gradient remained during the period sampled after the mussel invasion (2000–2012). However, mean summer chlorophyll increased and other measures of phytoplankton biomass (microscope and electronic cell counting) did not change significantly. Multivariate analyses of phytoplankton community structure demonstrate a significant community shift after the invasion. Cyanobacteria increased in dominance, with Microcystis becoming the major summer taxon in lower Green Bay. Diatom diversity and abundance also increased and Chlorophyta became rare. Phytoplankton responses along the trophic gradient of Green Bay to zebra mussel invasion highlight the importance of mussel effects on nutrient dynamics and phytoplankton diversity and function.

Description: This paper proposes a polygeneration system based on a multi-input chemical looping combustion system, which generates methanol and electricity, through the use of natural gas and coal. In this system, the chemical looping hydrogen (CLH) production system and the coal-based methanol production system are integrated. A high quality fuel, natural gas, is used to improve the conversion ratio of coal. The Gibbs energy of the two kinds of fuels is fully used. Benefitting from the chemical looping process, 27% CO2 can be captured without energy penalty. With the same outputs of methanol and electricity, the energy savings ratio of the new system is about 12%. Based on the exergy analyses, it is disclosed that the integration of synthetic utilization of natural gas and coal plays a significant role in reducing the exergy destruction of the new system. The promising results obtained in this paper may lead to a clean coal technology that will utilize natural gas and coal more efficiently and economically.

Description: Many city governments choose to supply more developable land and transportation infrastructure with the hope of attracting people and businesses to their cities. However, like those in Taiwan, major cities worldwide suffer from traffic congestion. This study applies the system thinking logic of the causal loops diagram (CLD) model in the System Dynamics (SD) approach to analyze the issue of traffic congestion and other issues related to roads and land development in Taiwan’s cities. Comparing the characteristics of development trends with yearbook data for 2002 to 2013 for all of Taiwan’s cities, this study explores the developing phenomenon of unlimited city sprawl and identifies the cause and effect relationships in the characteristics of development trends in traffic congestion, high-density population aggregation in cities, land development, and green land disappearance resulting from city sprawl. This study provides conclusions for Taiwan’s cities’ sustainability and development (S&D). When developing S&D policies, during decision making processes concerning city planning and land use management, governments should think with a holistic view of carrying capacity with the assistance of system thinking to clarify the prejudices in favor of the unlimited developing phenomena resulting from city sprawl.

Description: This study assessed the feasibility of community-based comprehensive intervention on Type 2 diabetes mellitus (T2DM) on a large population in China. An intervention study was conducted on 7200 T2DM patients within one year and consisted of six lectures on health issues, and four times face-to-face lifestyle counseling delivered by general health practitioners, at local primary health centers (PHCs). A “knowledge, attitude and practice” (KAP) survey and fasting plasma glucose (FPG) measurement were conducted at baseline and after the intervention, respectively. A total of 6586 T2DM patients completed the intervention. After one year intervention, patients’ KAP level improved significantly (p 〈 0.001) and the average FPG has decreased from 8.53 mmol/L (standard deviation: 2.84) to 7.11 mmol/L (standard deviation: 1.34) (p 〈 0.001). Patients in rural areas and with lower education level showed higher FPG and poorer KAP level both before and after the intervention. In conclusion, community-based comprehensive intervention for T2DM is feasible on a large population. Improving and repeating the comprehensive strategy is greatly recommended in order to sustain the impact, especially in rural areas and for patients with lower education levels.

Description: Near infrared radiation (NIR) has been used to enable the sintering of TiO2 films on fluorine-doped tin oxide (FTO) glass in 12.5 s. The 9 µm thick TiO2 films were constructed into working electrodes for dye-sensitized solar cells (DSCs) achieving similar photovoltaic performance to TiO2 films prepared by heating for 30 min in a convection oven. The ability of the FTO glass to heat upon 12.5 s exposure of NIR radiation was measured using an IR camera and demonstrated a peak temperature of 680°C; glass without the 600 nm FTO layer reached 350°C under identical conditions. In a typical DSC heating step, a TiO2 based paste is heated until the polymeric binder is removed leaving a mesoporous film. The weight loss associated with this step, as measured using thermogravimetric analysis, has been used to assess the efficacy of the FTO glass to heat sufficiently. Heat induced interparticle connectivity in the TiO2 film has also been assessed using optoelectronic transient measurements that can identify electron lifetime through the TiO2 film. An NIR treated device produced in 12.5 seconds shows comparable binder removal, electron lifetime, and efficiency to a device manufactured over 30 minutes in a conventional oven.

Description: This work presents the application of the reduced differential transform method (RDTM) to find solutions of partial differential-algebraic equations (PDAEs). Two systems of index-two and index-three are solved to show that RDTM can provide analytical solutions for PDAEs in convergent series form. In addition, we present the posttreatment of the power series solutions with the Laplace-Padé resummation method as a useful technique to find exact solutions. The main advantage of the proposed technique is that it is based on a few straightforward steps and does not generate secular terms or depend on a perturbation parameter.

Description: Band gap engineering provides an opportunity to not only provide higher overall conversion efficiencies of the reference AM1.5 spectra but also customize PV device design for specific geographic locations and microenvironments based on atmospheric conditions characteristic to that particular location. Indium gallium nitride and other PV materials offer the opportunity for limited bandgap engineering to match spectra. The effects of atmospheric conditions such as aerosols, cloud cover, water vapor, and air mass have been shown to cause variations in spectral radiance that alters PV system performance due to both overrating and underrating. Designing PV devices optimized for spectral radiance of a particular region can result in improved PV system performance. This paper presents a new method for designing geographically optimized PV cells with using a numerical model for bandgap optimization. The geographic microclimate spectrally resolved solar flux for twelve representative atmospheric conditions for the incident radiation angle (zenith angle) of 48.1° and fixed array angle of 40° is used to iteratively optimize the band gap for tandem, triple, and quad-layer of InGaN-based multijunction cells. The results of this method are illustrated for the case study of solar farms in the New York region and discussed.

Description: We report here a prototype laboratory setup for detecting ethylene (C2H4) in ppm level employing a sensor made of multiwalled carbon nanotubes of 40 nm average tube diameter. The proposed reversible chemoresistive ethylene sensor is fabricated using Kapton as the substrate onto which carbon nanotubes are coated using thick film technology. IDT silver electrodes are printed using piezo head based ink-jet printing technology. The increases in electrical resistance of the sensor element are measured on exposure to ethylene for different ethylene concentrations using a potentiostat and data acquisition system. The increase in resistance of the calibrated sensor element on exposure to ethylene (analyte) is about 18.4% at room temperature for 50 ppm ethylene concentration. This change is reversible. Our sensor element exhibits a better performance than those reported earlier (1.8%) and it has got the rise and fall time of 10 s and 60 s, respectively. It could be used for testing the ripening of fruits.

Description: Building change detection is useful for land management, disaster assessment, illegal building identification, urban growth monitoring, and geographic information database updating. This study proposes an automatic method that applies object-based analysis to multi-temporal point cloud data to detect building changes. The aim of this building change detection method is to identify areas that have changed and to obtain from-to information. In this method, the data are first preprocessed to generate two sets of digital surface models (DSMs), digital elevation models, and normalized DSMs from registered old and new point cloud data. Thereafter, on the basis of differential DSM, candidates for changed building objects are identified from the points in the smooth areas by using a connected component analysis technique. The random sample consensus fitting algorithm is then used to distinguish the true changed buildings from trees. The changed building objects are classified as “newly built”, “taller”, “demolished” or “lower” by using rule-based analysis. Finally, a test data set consisting of many buildings of different types in an 8.5 km2 area is selected for the experiment. In the test data set, the method correctly detects 97.8% of buildings larger than 50 m2. The accuracy of the method is 91.2%. Furthermore, to decrease the workload of subsequent manual checking of the result, the confidence index for each changed object is computed on the basis of object features.

Description: In this study, we test and demonstrate the utility of disturbance and recovery information derived from annual Landsat time series to predict current forest vertical structure (as compared to the more common approaches, that consider a sample of airborne Lidar and single-date Landsat derived variables). Mean Canopy Height (MCH) was estimated separately using single date, time series, and the combination of single date and time series variables in multiple regression and random forest (RF) models. The combination of single date and time series variables, which integrate disturbance history over the entire time series, overall provided better MCH prediction than using either of the two sets of variables separately. In general, the RF models resulted in improved performance in all estimates over those using multiple regression. The lowest validation error was obtained using Landsat time series variables in a RF model (R2 = 0.75 and RMSE = 2.81 m). Combining single date and time series data was more effective when the RF model was used (opposed to multiple regression). The RMSE for RF mean canopy height prediction was reduced by 13.5% when combining the two sets of variables as compared to the 3.6% RMSE decline presented by multiple regression. This study demonstrates the value of airborne Lidar and long term Landsat observations to generate estimates of forest canopy height using the random forest algorithm.

Description: Rice is the most important food security crop in Asia. Information on its seasonal extent forms part of the national accounting of many Asian countries. Synthetic Aperture Radar (SAR) imagery is highly suitable for detecting lowland rice, especially in tropical and subtropical regions, where pervasive cloud cover in the rainy seasons precludes the use of optical imagery. Here, we present a simple, robust, rule-based classification for mapping rice area with regularly acquired, multi-temporal, X-band, HH-polarized SAR imagery and site-specific parameters for classification. The rules for rice detection are based on the well-studied temporal signature of rice from SAR backscatter and its relationship with crop stages. We also present a procedure for estimating the parameters based on “temporal feature descriptors” that concisely characterize the key information in the rice signatures in monitored field locations within each site. We demonstrate the robustness of the approach on a very large dataset. A total of 127 images across 13 footprints in six countries in Asia were obtained between October 2012, and April 2014, covering 4.78 m ha. More than 1900 in-season site visits were conducted across 228 monitoring locations in the footprints for classification purposes, and more than 1300 field observations were made for accuracy assessment. Some 1.6 m ha of rice were mapped with classification accuracies from 85% to 95% based on the parameters that were closely related to the observed temporal feature descriptors derived for each site. The 13 sites capture much of the diversity in water management, crop establishment and maturity in South and Southeast Asia. The study demonstrates the feasibility of rice detection at the national scale using multi-temporal SAR imagery with robust classification methods and parameters that are based on the knowledge of the temporal dynamics of the rice crop. We highlight the need for the development of an open-access library of temporal signatures, further investigation into temporal feature descriptors and better ancillary data to reduce the risk of misclassification with surfaces that have temporal backscatter dynamics similar to those of rice. We conclude with observations on the need to define appropriate SAR acquisition plans to support policies and decisions related to food security.

Description: The aim of the present study was to evaluate the antibiofilm activity against Enterococcus faecalis, compressive strength. and radiopacity of Portland cement (PC) added to zirconium oxide (ZrO2), as radiopacifier, with or without nanoparticulated zinc oxide (ZnO). The following experimental materials were evaluated: PC, PC + ZrO2, PC + ZrO2 + ZnO (5%), and PC + ZrO2 + ZnO (10%). Antibiofilm activity was analyzed by using direct contact test (DCT) on Enterococcus faecalis biofilm, for 5 h or 15 h. The analysis was conducted by using the number of colony-forming units (CFU/mL). The compressive strength was performed in a mechanical testing machine. For the radiopacity tests, the specimens were radiographed together with an aluminium stepwedge. The results were submitted to ANOVA and Tukey tests, with level of significance at 5%. The results showed that all materials presented similar antibiofilm activity (). The addition of nanoparticulated ZnO decreased the compressive strength of PC. All materials presented higher radiopacity than pure PC. It can be concluded that the addition of ZrO2 and ZnO does not interfere with the antibiofilm activity and provides radiopacity to Portland cement. However, the presence of ZnO (5% or 10%) significantly decreased the compressive strength of the materials.

Description: The purpose of this study was to investigate the effects of vitamin B6 (Vit B6) on oxidant and antioxidant status in streptozotocin-induced diabetic rats. Thirty-two Wistar rats were divided into four groups: control (C), control + Vit B6 group (C + Vit B6), diabetes (D), and diabetes + Vit B6 group (D + Vit B6). Vit B6 (4 mg/kg body weight) was administered in drinking water for 4 weeks after the induction of diabetes. Vitamin B6 reduced serum total cholesterol level in the C + Vit B6 (P 〈 0.01) and D + Vit B6 (P 〈 0.05) groups. Plasma and tissue malondialdehyde levels were reduced in the C + Vit B6 and D + Vit B6 groups. Whole blood glutathione peroxidase (GSH-Px) and erythrocyte superoxide dismutase (SOD) activities were higher in the D group (P 〈 0.05). GSH-Px and SOD activities were increased in C + Vit B6 group while these parameters decreased in the D + Vit B6 group. Paraoxonase and arylesterase activities were decreased in the D group while they were increased in C + Vit B6 and D + Vit B6 groups. The results of present study suggest that vitamin B6 supplementation might be a promising adjunctive agent for improving oxidative stress and metabolic disturbances and for preventing diabetic complications including atherogenesis.

Description: Background. Perianal Crohn’s disease (CD) can be challenging. Despite the high incidence of fistulizing CD, literature lacks clear guidelines. Several medical, surgical, and combined treatment modalities have been proposed, but evidences are scarce. Methods. We searched the literature to assess the facets of perianal CD, with particular focus on complex fistulae. Disease epidemiology, classification, diagnosis, activity scoring systems, and medical-surgical treatments were assessed. Results. Perianal fistulizing CD is common, frequently associated with upper gastrointestinal and colorectal CD. Complex fistulas often require repeated treatments. Continence is a major concern when dealing with repeated procedures. A prudent pathway is to resolve active sepsis and to limit damages, delaying a definitive treatment to the time when acute phase has been controlled. The improved diagnostic techniques allow better preoperative planning and are useful in monitoring the response to treatment. Besides newer devices, cell-based treatments are promising tools which have recently enriched the treatment portfolio. However, the need for proctectomy is still disturbingly high in CD patients with complex perianal fistulae. Conclusions. Perianal CD can impair quality of life and lead to need for proctectomy. A staged approach is reasonable. Treatment success can be improved by multimodal treatment and collaborative management by experienced gastroenterologists and surgeons.

Description: An institutional study was carried out in 102 patients to investigate the site specific effect of addictions, that is, tobacco smoking and tobacco chewing (smokeless), both independently and synergistically in development of malignancies in upper aerodigestive tract through retrograde questionnaire. The histopathologically proven cases were interviewed regarding different forms of addictions followed by clinical examination and investigations for grading (according to Modified Broadmann’s method) and TNM staging (according to UICC) according to the tumor site. Statistical analysis was done by Pearson test. Out of all proven cases of cancers, 29.4% were only tobacco chewers (smokeless), 25.5% were only smokers, 42.2% were having both types of tobacco addictions (smoke and smokeless), and only 2.9% were having no addiction. Out of only tobacco chewers (smokeless), 83.3% were of oral cavity cancers, 6.7% were of oro- and hypopharynx and the rest were of others. Among only smokers, 69.2% cases were of laryngeal and oro- and hypopharynx as compared to 11.5% of oral cavity cancers (nearly 6 times). Tobacco (smokeless) chewing is associated with oral cancers whereas tobacco smoking is associated with laryngeal and hypopharyngeal carcinoma. Both smoking and smokeless tobacco act in synergy with each other.

Description: Objective. Our purpose was to provide a comprehensive understanding of how women informal caregivers of patients in vegetative state (VS) or minimally conscious state (MCS) describe, represent, and experience changes that occurred in their life after the acute event of their family member. Methods. A qualitative study was conducted and fifteen women informal caregivers, mothers, or spouses of patients in VS or MCS were interviewed. Results. Caregivers’ narratives revealed (1) important personal and interpersonal changes and (2) difficulties while facing the complex situation and integrating past, present, and future, defined as a “time gap experience.” This difficulty is expressed in two ways. First, the reduction of variety of roles into one, caregiver’s role. Second, the relationship with the relative is characterised by fluctuation in the relational style between caregiver and relative; it shifts from an adult to adult interaction to an adult to child one. Another fluctuation can be observed in the mixed use of present and past tenses when caregivers speak about their relatives. Conclusions. Caregiving cause pervasive modifications in one’s life. Targeted interventions aiming to empower the caregivers, to support them after the acute event in caregiving activities together with patient-focused interventions, and to promote their health should be implemented.

Description: We provide the first information on the behavior of a small primate (Callithrix jacchus) inhabiting a semiarid Caatinga environment in northeastern Brazil. We observed behavioral variations in response to temperature fluctuation throughout the day. Due to the high temperatures, low precipitation, and resource scarcity in the Caatinga, as well as the lack of physiological adaptations (e.g., a highly concentrated urine and a carotid rete to cool down the brain) of these primates, we expected that the common marmosets would exhibit behavioral adjustments, such as a prolonged resting period or the use of a large home range. During the six-month period, we collected 246 hours of behavioral data of two groups (10 individuals) of Callithrix jacchus. Most of the observed behavioral patterns were influenced by temperature fluctuation. Animals rested longer and reduced other activities, such as foraging, when temperatures were higher. Both study groups exploited home ranges of 2.21–3.26 ha, which is within the range described for common marmosets inhabiting the Atlantic Forest. Our findings confirm that common marmosets inhabiting the Caatinga adjust their behavioral patterns to cope with the high temperatures that characterize this environment and highlight their ability to survive across a wide range of different environmental conditions.

Description: Objective. To compare the proportion of synovitis detected by ultrasonographic study (USS) of the hands, in subjects with no rheumatologic known disease according to self-reported level of overexertion performed the day before. Methods. 407 consecutive volunteers were enrolled in a twelve-month period and underwent an ultrasound assessment of the hand. All studies were performed on Monday or Friday. Subjects were grouped according to their self-reported overexertion carried out the day before. Presence or absence of ultrasonographic findings compatible with synovitis was compared between groups. Results. 95.8% of those tested on Friday had made no overexertion the day before the study, while 30.2% of those assessed on Monday declared to have carried out an overexertion. Presence of carpal synovial hypertrophy, synovial fluid/effusion, and power-Doppler signal was statistically higher in subjects who carried out an overexertion the day before the study than the rest of subjects when the dominant hand was assessed. Globally, presence of any synovitis ultrasonographic finding was statistically higher in subjects who were studied on Monday than Friday (34.9% versus 12.1%) and in subjects who self-reported an overexertion the day before compared to the rest of subjects (47.7 versus 11.5%). Conclusions. In general, we recommend performing the USS as many days as possible after the most recent overexertion.

Description: The amount of liquid water in snow characterizes the wetness of a snowpack. Its temporal evolution plays an important role for wet-snow avalanche prediction, as well as the onset of meltwater release and water availability estimations within a river basin. However, it is still a challenge and a not yet satisfyingly solved issue to measure the liquid water content (LWC) in snow with conventional in situ and remote sensing techniques. We propose a new approach based on the attenuation of microwave radiation in the L-band emitted by the satellites of the Global Positioning System (GPS). For this purpose, we performed a continuous low-cost GPS measurement experiment at the Weissfluhjoch test site in Switzerland, during the snow melt period in 2013. As a measure of signal strength, we analyzed the carrier-to-noise power density ratio (C/N0) and developed a procedure to normalize these data. The bulk volumetric LWC was determined based on assumptions for attenuation, reflection and refraction of radiation in wet snow. The onset of melt, as well as daily melt-freeze cycles were clearly detected. The temporal evolution of the LWC was closely related to the meteorological and snow-hydrological data. Due to its non-destructive setup, its cost-efficiency and global availability, this approach has the potential to be implemented in distributed sensor networks for avalanche prediction or basin-wide melt onset measurements.

Description: On-site analysis is an efficient approach to facilitate analysis at the location of the system under investigation as it can result in more accurate, more precise and quickly available analytical data. In our work, a novel self-made thermal desorption based interface was fabricated to couple solid-phase microextraction with ion mobility spectrometry for on-site water analysis. The portable interface can be connected with the front-end of an ion mobility spectrometer directly without other modifications. The analytical performance was evaluated via the extraction of chemical warfare agents and simulants in water samples. Several parameters including ionic strength and extraction time have been investigated in detail. The application of the developed method afforded satisfactory recoveries ranging from 72.9% to 114.4% when applied to the analysis of real water samples.

Description: We consider the problem of localising an unknown number of land mines usingconcentration information provided by a wireless sensor network. A number of vapoursensors/detectors, deployed in the region of interest, are able to detect the concentrationof the explosive vapours, emanating from buried land mines. The collected data iscommunicated to a fusion centre. Using a model for the transport of the explosive chemicalsin the air, we determine the unknown number of sources using a Principal ComponentAnalysis (PCA)-based technique. We also formulate the inverse problem of determiningthe positions and emission rates of the land mines using concentration measurementsprovided by the wireless sensor network. We present a solution for this problem basedon a probabilistic Bayesian technique using a Markov chain Monte Carlo sampling scheme,and we compare it to the least squares optimisation approach. Experiments conducted onsimulated data show the effectiveness of the proposed approach.

Description: A smart-card-based user authentication scheme for wireless sensor networks (in short, a SUA-WSN scheme) is designed to restrict access to the sensor data only to users who are in possession of both a smart card and the corresponding password. While a significant number of SUA-WSN schemes have been suggested in recent years, their intended security properties lack formal definitions and proofs in a widely-accepted model. One consequence is that SUA-WSN schemes insecure against various attacks have proliferated. In this paper, we devise a security model for the analysis of SUA-WSN schemes by extending the widely-accepted model of Bellare, Pointcheval and Rogaway (2000). Our model provides formal definitions of authenticated key exchange and user anonymity while capturing side-channel attacks, as well as other common attacks. We also propose a new SUA-WSN scheme based on elliptic curve cryptography (ECC), and prove its security properties in our extended model. To the best of our knowledge, our proposed scheme is the first SUA-WSN scheme that provably achieves both authenticated key exchange and user anonymity. Our scheme is also computationally competitive with other ECC-based (non-provably secure) schemes.

Description: Optical mouse chips—equipped with adequate lenses—can serve as small, light, precise, fast, and cheap motion sensors monitoring optic flow induced by self motion of an agent in a contrasted environment. We present a device that extracts self motion parameters exclusively from flow in eight mouse sensors. Four pairs of sensors with opposite azimuth are mounted on a sensor head, each individual sensor looking down with \(-\)45\(^{\circ}\) elevation. The head is mounted on a carriage and is moved at constant height above a textured planar ground. The calibration procedure and tests on the precision of self motion estimates are reported.

Description: The South Korean government has long been attempting to reduce the nation’s heavy reliance on fossil fuels and increase environmental safety by developing and installing renewable power generation infrastructures and implementing policies for promoting the green growth of Korea’s energy industry. This study focuses on the use of independent renewable power generation systems in the more than 3000 officially affirmed islands off Korea’s coast and proposes a simulated solution to the electricity load demand on Ulleungdo Island that incorporates several energy sources (including solar, batteries, and wind) as well as one hydro-electric and two diesel generators. Recommendations based on the simulation results and the limitations of the study are discussed.

Description: Evaluation of the sustainability of biomass pyrolysis requires a thorough assessment of the product yields and energy densities. With this purpose, a laboratory scale fixed bed reactor (FBR) was adapted from the standard Gray-King (GK) assay test on coal to conduct fixed bed pyrolysis experiments on agricultural and agro-industrial by-products. The present study provides results on the pyrolysis of two types of biomass: chipped olive tree trimmings (OT) and olive pomace (OP). Solid (char) and liquid (tar) product yields are reported. Mass yields are determined and compared with values obtained in similar works. Results indicate that char yield decreases from 49% (OT-db) and 50% (OP-db) at 325 °C to 26% (OT db) and 30% (OP-db) at 650 °C. Tar yield is almost constant (42%) at different reaction temperatures for OT, while it decreases slightly from 42% to 35% for OP. Energy density of the products at different peak temperatures is almost constant for OT (1.2), but slightly increases for OP (from a value of 1.3 to a value of 1.4).

Description: Efficient delivery and precision provision of urban public services concern quality of urban life and urban sustainability. Amid much debate regarding citizen assessments as a policy tool of public services, this study examines the validity of citizen assessments through user assessments of urban green spaces (UGSs) in Guangzhou, China. Users can distinguish the qualities of UGS across the dimensions and types, the assessment of individual UGSs matches the overall assessment of all UGSs in the city as a whole, and the overall assessment is only slightly influenced by personal backgrounds. Findings consistently support user assessments as a policy tool of UGSs and offer empirical evidence on the validity of citizen assessments. This positive evidence will encourage city managers to seriously consider citizen assessments and even institutionalize them as a standard management practice of (specific) urban public services, including UGSs, in China and abroad.

Description: Future wireless sensor networks are expected to provide various sensing services and energy efficiency is one of the most important criterions. The node scheduling strategy aims to increase network lifetime by selecting a set of sensor nodes to provide the required sensing services in a periodic manner. In this paper, we are concerned with the service-oriented node scheduling problem to provide multiple sensing services while maximizing the network lifetime. We firstly introduce how to model the data correlation for different services by using Markov Random Field (MRF) model. Secondly, we formulate the service-oriented node scheduling issue into three different problems, namely, the multi-service data denoising problem which aims at minimizing the noise level of sensed data, the representative node selection problem concerning with selecting a number of active nodes while determining the services they provide, and the multi-service node scheduling problem which aims at maximizing the network lifetime. Thirdly, we propose a Multi-service Data Denoising (MDD) algorithm, a novel multi-service Representative node Selection and service Determination (RSD) algorithm, and a novel MRF-based Multi-service Node Scheduling (MMNS) scheme to solve the above three problems respectively. Finally, extensive experiments demonstrate that the proposed scheme efficiently extends the network lifetime.

Description: The aim of this study is to analyze the environmental performance of countries and the variables that can influence it. At the same time, we performed a multivariate analysis using the HJ-biplot, an exploratory method that looks for hidden patterns in the data, obtained from the usual singular value decomposition (SVD) of the data matrix, to contextualize the countries grouped by geographical areas and the variables relating to environmental indicators included in the environmental performance index. The sample used comprises 149 countries of different geographic areas. The findings obtained from the empirical analysis emphasize that socioeconomic factors, such as economic wealth and education, as well as institutional factors represented by the style of public administration, in particular control of corruption, are determinant factors of environmental performance in the countries analyzed. In contrast, no effect on environmental performance was found for factors relating to the internal characteristics of a country or political factors.

Description: The relationship between economic growth, expansion of urban land area and the broader issue of cultivated land conversion in China has been closely examined for the late 1980s and 1990s. Much less is known about recent urban expansion and if the effects of economic growth on this expansion have changed over time. This paper updates estimates of urban expansion for China and examines the relationship with city economic growth for 1993–2012. To see if patterns are robust to different types of evidence, administrative data on the area of 225 urban cores are compared to estimates of brightly lit areas from remotely sensed night lights. The trend annual expansion rate in lit area is 8% and was significantly faster in the decade to 2002 than in the most recent decade. Expansion is slower according to administrative data, at just 5% per annum, with no change in unconditional expansion rates between decades, while conditional expansion rates have declined. The elasticity of area with respect to city economic output is about 0.3. Over time, expansion of urban land area is becoming less responsive to the growth of the local non-agricultural population.

Description: In order to meet the needs of wind speed prediction in wind farms, we consider the influence of random atmospheric disturbances on wind variations. Considering a simplified fluid convection mode, a Lorenz system can be employed as an atmospheric disturbance model. Here Lorenz disturbance is defined as the European norm of the solutions of the Lorenz equation. Grey generating and accumulated generating models are employed to explore the relationship between wind speed and its related disturbance series. We conclude that a linear or quadric polynomial generating model are optimal through the verification of short-term wind speed prediction in the Sotavento wind farm. The new proposed model not only greatly improves the precision of short-term wind speed prediction, but also has great significance for the maintenance and stability of wind power system operation.

Description: The existing material classification is proposed to improve the inventory management. However, different materials have the different quality-related attributes, especially in the aircraft industry. In order to reduce the cost without sacrificing the quality, we propose a quality-oriented material classification system considering the material quality character, Quality cost, and Quality influence. Analytic Hierarchy Process helps to make feature selection and classification decision. We use the improved Kraljic Portfolio Matrix to establish the three-dimensional classification model. The aircraft materials can be divided into eight types, including general type, key type, risk type, and leveraged type. Aiming to improve the classification accuracy of various materials, the algorithm of Support Vector Machine is introduced. Finally, we compare the SVM and BP neural network in the application. The results prove that the SVM algorithm is more efficient and accurate and the quality-oriented material classification is valuable.

Description: Background. Evaluation of family system is an important area in the context of child and adolescent mental health. This study aimed to estimate psychiatric disorders in parents of children and adolescents with bipolar I disorder (BID). Methods and Materials. In this cross-sectional study, during 2012-2013, all of the children and adolescents diagnosed with BID based on Kiddie Schedule for Affective Disorders and Schizophrenia-Present and Lifetime Version were included. All of the parents (both mother and father) were evaluated by Structured Clinical Interview for DSM-IV-TR. Statistical Analysis. Prevalence rates are reported and independent-sample t-test and chi-square test were used when appropriate. Results. A total of 108 families were interviewed. 25% of mothers and 33% of fathers met the criteria for at least one psychiatric disorder, with major depressive disorder, BMD, and cluster B personality disorder being more prevalent. Fathers were more likely to receive a dual psychiatric diagnosis. Cluster B personality disorder and substance dependence were more prevalent among fathers while major depressive disorder was more prevalent among mothers. Conclusion. This study confirmed a higher prevalence of psychiatric disorders in parents of children with BID and emphasizes parental evolution.

Description: Global insurance markets are vast and diverse, and may offer many opportunities for remote sensing. To date, however, few operational applications of remote sensing for insurance exist. Papers claiming potential application of remote sensing typically stress the technical possibilities, without considering its contribution to customer value for the insured or to the profitability of the insurance industry. Based on a systematic search of available literature, this review investigates the potential and actual support of remote sensing to the insurance industry. The review reveals that research on remote sensing in classical claim-based insurance described in the literature revolve around crop damage and flood and fire risk assessment. Surprisingly, the use of remote sensing in claim-based insurance appears to be instigated by government rather than the insurance industry. In contrast, insurance companies are offering various index insurance products that are based on remote sensing. For example, remotely sensed index insurance for rangelands and livestock are operational, while various applications in crop index insurance are being considered or under development. The paper discusses these differences and concludes that there is particular scope for application of remote sensing by the insurance industry in index insurance because (1) indices can be constructed that correlate well with what is insured; (2) these indices can be delivered at low cost; and (3) it opens up new markets that are not served by claim-based insurance. The paper finally suggests that limited adoption of remote sensing in insurance results from a lack of mutual understanding and calls for greater cooperation between the insurance industry and the remote sensing community.

Description: Vegetation cover can affect the lithological mapping capability of space- and airborne instruments because it obscures the spectral signatures of the underlying geological substrate. Despite being widely accepted as a hindrance, few studies have explicitly demonstrated the impact vegetation can have on remote lithological mapping. Accordingly, this study comprehensively elucidates the impact of vegetation on the lithological mapping capability of airborne multispectral data in the Troodos region, Cyprus. Synthetic spectral mixtures were first used to quantify the potential impact vegetation cover might have on spectral recognition and remote mapping of different rock types. The modeled effects of green grass were apparent in the spectra of low albedo lithologies for 30%–40% fractional cover, compared to just 20% for dry grass cover. Lichen was found to obscure the spectra for 30%–50% cover, depending on the spectral contrast between bare rock and lichen cover. The subsequent impact of vegetation on the remote mapping capability is elucidated by considering the outcomes of three airborne multispectral lithological classifications alongside the spectral mixing analysis and field observations. Vegetation abundance was found to be the primary control on the inability to classify large proportions of pixels in the imagery. Matched Filtering outperformed direct spectral matching algorithms owing to its ability to partially unmix pixel spectra with vegetation abundance above the modeled limits. This study highlights that despite the limited spectral sampling and resolution of the sensor and dense, ubiquitous vegetation cover, useful lithological information can be extracted using an appropriate algorithm. Furthermore, the findings of this case study provide a useful insight to the potential capabilities and challenges faced when utilizing comparable sensors (e.g., Landsat 8, Sentinel-2, WorldView-3) to map similar types of terrain.

Description: The origin of large areas dominated by pristine open vegetation that is in sharp contrast with surrounding dense forest within the Amazonian lowland has generally been related to past arid climates, but this is still an issue open for debate. In this paper, we characterize a large open vegetation patch over a residual megafan located in the northern Amazonia. The main goal was to investigate the relationship between this paleolandform and vegetation classes mapped based on the integration of optical and SAR data using the decision tree. Our remote sensing dataset includes PALSAR and TM/Landsat images. Five classes were identified: rainforest; flooded forest; wooded open vegetation; grassy-shrubby open vegetation; and water body. The output map resulting from the integration of PALSAR and TM/Landsat images showed an overall accuracy of 94%. Narrow, elongated and sinuous belts of forest within the open vegetation areas progressively bifurcate into others revealing paleochannels arranged into distributary pattern. Such characteristics, integrated with pre-existing geological information, led us to propose that the distribution of vegetation classes highlight a morphology attributed to a Quaternary megafan developed previous to the modern fluvial tributary system. The characterization of such megafan is important for reconstructing landscape changes associated with the evolution of the Amazon drainage basin.

Description: Flash Flood Guidance consists of indices that estimate the amount of rain of a certain duration that is needed over a given small basin in order to cause minor flooding. Backwater catchment inundation from swollen rivers or regional groundwater inputs are not significant over the spatial and temporal scales for the majority of upland flash flood prone basins, as such, these effects are not considered. However, some lowland areas and flat terrain near large rivers experience standing water long after local precipitation has ceased. NASA is producing an experimental product from the MODIS that detects standing water. These observations were assimilated into the hydrologic model in order to more accurately represent soil moisture conditions within basins, from sources of water from outside of the basin. Based on the upper soil water content, relations are used to derive an error estimate for the modeled soil saturation fraction; whereby, the soil saturation fraction model state can be updated given the availability of satellite observed inundation. Model error estimates were used in a Monte Carlo ensemble forecast of soil water and flash flood potential. Numerical experiments with six months of data (July 2011–December 2011) showed that MODIS inundation data, when assimilated to correct soil moisture estimates, increased the likelihood that bankfull flow would occur, over non-assimilated modeling, at catchment outlets for approximately 44% of basin-days during the study time period. While this is a much more realistic representation of conditions, no actual events occurred allowing for validation during the time period.

Description: For a foam-covered sea surface, it is difficult to retrieve sea surface salinity (SSS) with L-band brightness temperature (1.4 GHz) because of the effect of a foam layer with wind speeds stronger than 7 m/s, especially at low sea surface temperature (SST). With foam-controlled experiments, emissivities of a foam-covered water surface at low SST (−1.4 °C to 1.7 °C) are measured for varying SSS, foam thickness, incidence angle, and polarization. Furthermore, a theoretical model of emissivity is introduced by combining wave approach theory with the effective medium approximation method. Good agreement is obtained upon comparing theoretical emissivities with those of experiments. The results indicate that foam parameters have a strong influence on increasing emissivity of a foam-covered water surface. Increments of experimental emissivities caused by foam thickness of 1 cm increase from about 0.014 to 0.131 for horizontal polarization and 0.022 to 0.150 for vertical polarization with SSS increase and SST decrease. Contributions of the interface between the foam layer and water surface to the foam layer emissivity increments are discussed for frequencies between 1 and 37 GHz.

Description: Maintaining a healthy ecosystem is essential for maximizing sustainable ecological services of the best quality to human beings. Ecological and conservation research has provided a strong scientific background on identifying ecological health indicators and correspondingly making effective conservation plans. At the same time, ecologists have asserted a strong need for spatially explicit and temporally effective ecosystem health assessments based on remote sensing data. Currently, remote sensing of ecosystem health is only based on one ecosystem attribute: vigor, organization, or resilience. However, an effective ecosystem health assessment should be a comprehensive and dynamic measurement of the three attributes. This paper reviews opportunities of remote sensing, including optical, radar, and LiDAR, for directly estimating indicators of the three ecosystem attributes, discusses the main challenges to develop a remote sensing-based spatially-explicit comprehensive ecosystem health system, and provides some future perspectives. The main challenges to develop a remote sensing-based spatially-explicit comprehensive ecosystem health system are: (1) scale issue; (2) transportability issue; (3) data availability; and (4) uncertainties in health indicators estimated from remote sensing data. However, the Radarsat-2 constellation, upcoming new optical sensors on Worldview-3 and Sentinel-2 satellites, and improved technologies for the acquisition and processing of hyperspectral, multi-angle optical, radar, and LiDAR data and multi-sensoral data fusion may partly address the current challenges.

Description: This paper reviews the most dependable heat flux sensors, which can be used with InfraRed (IR) thermography to measure convective heat transfer coefficient distributions, and some of their applications performed by the authors’ research group at the University of Naples Federico II. After recalling the basic principles that make IR thermography work, the various heat flux sensors to be used with it are presented and discussed, describing their capability to investigate complex thermo-fluid-dynamic flows. Several applications to streams, which range from natural convection to hypersonic flows, are also described.

Description: In this study a microclimate analysis on a particular urban configuration: the—street canyon—has been carried out. The analysis, conducted by performing numerical simulations using the finite volumes commercial code ANSYS-Fluent, shows the flow field in an urban environment, taking into account three different aspect ratios (H/W). This analysis can be helpful in the study on urban microclimate and on the heat exchanges with the buildings. Fluid-dynamic fields on vertical planes within the canyon, have been evaluated. The results show the importance of the geometrical configuration, in relation to the ratio between the height (H) of the buildings and the width (W) of the road. This is a very important subject from the point of view of “Smart Cities”, considering the urban canyon as a subsystem of a larger one (the city), which is affected by climate changes.

Description: We introduce an efficient multiuser scheduling method using amplify-and-forward relaying in relay-aided downlink systems, consisting of one base station (BS), one relay station, and multiple mobile stations (MSs). In our scheme, the BS opportunistically selects both the transmission mode, that is, either one- or two-hop transmission, and the desired user (i.e., the desired MS). Closed-form expressions for the average achievable rates are derived for the two transmission modes with multiuser scheduling, and its asymptotic solutions are also analyzed in the limit of large number of MSs. Based on the analysis, we propose a feedback-efficient two-step multiuser scheduling algorithm: the transmission mode selection followed by the user selection that only needs a partial feedback for instantaneous signal-to-noise ratios (SNRs) to the BS. We also analyze the average SNR condition such that the multiuser diversity gain is fully exploited for two-hop transmission. The proposed two-step scheduling algorithm exhibits the quite comparable achievable rates to those of the optimal one using full feedback information, while its required feedback information is reduced by half of the optimal one.

Description: Background. The best surgical technique for large liver hydatid cysts (LHCs) has not yet been agreed on. Objectives. The objective of this study was to examine the role of perioperative endoscopic retrograde cholangiopancreatography (ERCP) and biliary drainage in patients with large LHCs. Methods. A 20-year retrospective study of patients with LHCs treated surgically at the University Clinical Center of Kosovo (UCCK). We divided patients into 2 groups based on treatment period: 1981–1990 (Group I) and 2001–2010 (Group II). Demographic characteristics (sex, age), the surgical procedure performed, complications rate, and outcomes were compared. Results. Of the 340 patients in our study, 218 (64.1%) were female with median age of 37 years (range, 17 to 81 years). 71% of patients underwent endocystectomy with partial pericystectomy and omentoplication, 8% total pericystectomy, 18% endocystectomy with capitonnage, and 3% external drainage. In Group I, 10 patients underwent bile duct exploration and T-tube placement; in Group II, 39 patients underwent bile duct exploration and T-tube placement. In addition, 9 patients in Group II underwent perioperative ERCP with papillotomy. The complication rate was 14.32% versus 6.37%, respectively (). Conclusion. Perioperative ERCP and biliary drainage significantly decreased the complication rate and improved outcomes in patients with large LHCs.

Description: Seaweeds are potentially excellent sources of highly bioactive materials that could represent useful leads in the alleviation of salinity stress. The effects of presoaking wheat grains in water extract of Ulva lactuca on growth, some enzymatic activities, and protein pattern of salinized plants were investigated in this study. Algal presoaking of grains demonstrated a highly significant enhancement in the percentage of seed germination and growth parameters. The activity of superoxide dismutase (SOD) and catalase (CAT) increased with increasing the algal extract concentration while activity of ascorbate peroxidase (APX) and glutathione reductase (GR) was decreased with increasing concentration of algal extract more than 1% (w/v). The protein pattern of wheat seedling showed 12 newly formed bands as result of algal extract treatments compared with control. The bioactive components in U. lactuca extract such as ascorbic acid, betaine, glutathione, and proline could potentially participate in the alleviation of salinity stress. Therefore, algal presoaking is proved to be an effective technique to improve the growth of wheat seedlings under salt stress conditions.

Description: Impact modeling of fiber reinforced polymer composites is a complex and challenging task, in particular for practitioners with less experience in advanced coding and user-defined subroutines. Different numerical algorithms have been developed over the past decades for impact modeling of composites, yet a considerable gap often exists between predicted and experimental observations. In this paper, after a review of reported sources of complexities in impact modeling of fiber reinforced polymer composites, two simplified approaches are presented for fast simulation of out-of-plane impact response of these materials considering four main effects: (a) strain rate dependency of the mechanical properties, (b) difference between tensile and flexural bending responses, (c) delamination, and (d) the geometry of fixture (clamping conditions). In the first approach, it is shown that by applying correction factors to the quasistatic material properties, which are often readily available from material datasheets, the role of these four sources in modeling impact response of a given composite may be accounted for. As a result a rough estimation of the dynamic force response of the composite can be attained. To show the application of the approach, a twill woven polypropylene/glass reinforced thermoplastic composite laminate has been tested under 200 J impact energy and was modeled in Abaqus/Explicit via the built-in Hashin damage criteria. X-ray microtomography was used to investigate the presence of delamination inside the impacted sample. Finally, as a second and much simpler modeling approach it is shown that applying only a single correction factor over all material properties at once can still yield a reasonable prediction. Both advantages and limitations of the simplified modeling framework are addressed in the performed case study.

Description: The aim of this study was to determine, by Atomic Absorption Spectrometry (AAS), the concentration levels of 11 metals in Type V gray and structural white PC, ProRoot MTA, and MTA Bio. Samples, containing one gram of each tested cement, were prepared and transferred to a 100 mL Teflon tube with a mixture of 7.0 mL of nitric acid and 21 mL of hydrochloric acid. After the reaction, the mixture was filtered and then volumed to 50 mL of distilled water. For each metal, specific patterns were determined from universal standards. Arsenic quantification was performed by hydride generator. The analysis was performed five times and the data were statistically analyzed at 5% level of significance. Only the cadmium presented concentration levels of values lower than the quantification limit of the device. The AAS analysis showed increased levels of calcium, nickel, and zinc in structural white PC. Type V PC presented the greatest concentration levels of arsenic, chromium, copper, iron, lead, and manganese . Bismuth was found in all cements, and the lowest concentration levels were observed in Portland cements, while the highest were observed in ProRoot MTA. Both PC and MTA-based cements showed evidence of metals inclusion.

Description: In contrast to ground-based solar-induced chlorophyll fluorescence (Fs) detection, the influence of atmospheric radiation transfer is the major difficulty in Fs retrieval from space. In this study, we first simulated top-of-atmosphere (TOA) radiance using FluorMODgui3.1 and MODTRAN5 code. Based on the simulated dataset, we analyzed the sensitivities of five potential Fs retrieval bands (Hα, K I, Fe, O2-A, and O2-B) to different atmospheric transfer parameters, including atmosphere profile, aerosol optical depth (AOD550), vertical water vapor column (H2O), vertical ozone column (O3), solar zenith angle (SZA), view zenith angle (VZA), relative azimuth angle (RAA) and elevation. The results demonstrate that the Hα, O2-A and O2-B bands are the most sensitive to these atmospheric parameters. However, only the O2-A and O2-B bands were found to be sensitive to the imaging geometric parameters. When the spectral resolution was sufficient, the K I and Fe bands proved to have the best potential for space-based Fs retrieval given the current available accuracies of atmospheric products, while the O2-A band was shown to perform better at lower spectral resolutions. The band sensitivity analysis presented here will be useful for band selection and atmospheric correction for space-based Fs retrieval.

Description: Objectives. To evaluate the application of Disease Activity Score 28 (DAS28) to assess joint involvement in Systemic Lupus Erythematosus (SLE). Methods. Sixty-nine SLE patients, complaining of joint symptoms, and 44 rheumatoid arthritis (RA) patients were enrolled. In SLE patients disease activity was assessed with SLEDAI-2K. DAS28 was calculated in all the patients. Results. Thirty SLE patients (43.5%) showed clinical signs of arthritis. Mean DAS28 was , 22 patients (31.9%) had low disease activity, 29 (42.0%) moderate, and 18 (26.1%) high. We dichotomized SLE patients according to the presence (Group 1) or absence (Group 2) of articular involvement according to SLEDAI-2K: 56.3% of the patients of the second group had a moderate/high activity according to DAS28. We compared SLE patients with 44 RA patients (M/F 9/35, mean age years; mean disease duration months). No significant differences were found regarding the values of DAS28 between SLE and RA patients. On the contrary, the values of tender and swollen joint count were significantly higher in RA compared to SLE patients ( and , resp.). Conclusions. We suggest the use of the DAS28 in the assessment of joint involvement in SLE patients.

Description: This study investigated the impact of calcium silicate (CS) content on composition, compressive mechanical properties, and hardness of CS cermets with Ti-55Ni and Ti-6Al-4V alloys sintered at 1200°C. The powder metallurgy route was exploited to prepare the cermets. New phases of materials of Ni16Ti6Si7, CaTiO3, and Ni31Si12 appeared in cermet of Ti-55Ni with CS and in cermet of Ti-6Al-4V with CS, the new phases Ti5Si3, Ti2O, and CaTiO3, which were emerged during sintering at different CS content (wt%). The minimum shrinkage and density were observed in both groups of cermets for the 50 and 100 wt% CS content, respectively. The cermets with 40 wt% of CS had minimum compressive Young’s modulus. The minimum of compressive strength and strain percentage at maximum load were revealed in cermets with 50 and 40 wt% of CS with Ti-55Ni and Ti-6Al-4V cermets, respectively. The cermets with 80 and 90 wt% of CS showed more plasticity than the pure CS. It concluded that the composition and mechanical properties of sintered cermets of Ti-55Ni and Ti-6Al-4V with CS significantly depend on the CS content in raw cermet materials. Thus, the different mechanical properties of the cermets can be used as potential materials for different hard tissues replacements.

Description: This study collected different probiotic isolates from animal and plant sources to evaluate the bile-salt hydrolase activity of probiotics in vitro. The deconjugation potential of bile acid was determined using high-performance liquid chromatography. HepG2 cells were cultured with probiotic strains with high BSH activity. The triglyceride (TG) and apolipoprotein B (apo B) secretion by HepG2 cells were evaluated. Our results show that the BSH activity and bile-acid deconjugation abilities of Pediococcus acidilactici NBHK002, Bifidobacterium adolescentis NBHK006, Lactobacillus rhamnosus NBHK007, and Lactobacillus acidophilus NBHK008 were higher than those of the other probiotic strains. The cholesterol concentration in cholesterol micelles was reduced within 24 h. NBHK007 reduced the TG secretion by 100% after 48 h of incubation. NBHK002, NBHK006, and NBHK007 could reduce apo B secretion by 33%, 38%, and 39%, respectively, after 24 h of incubation. The product PROBIO S-23 produced a greater decrease in the total concentration of cholesterol, low-density lipoprotein, TG, and thiobarbituric acid reactive substance in the serum or livers of hamsters with hypercholesterolemia compared with that of hamsters fed with a high-fat and high-cholesterol diet. These results show that the three probiotic strains of lactic acid bacteria are better candidates for reducing the risk of cardiovascular disease.

Description: Nasal carriers of Staphylococcus aureus are important reservoirs with risk of developing endogenous infections or transmitting infections to susceptible individuals. Methicillin-resistant S. aureus (MRSA) are associated with higher rates of treatment failure. Some strains of S. aureus produce slime which is believed to make the microorganisms more resistant to antibiotics and host defenses. The antibacterial activity of ethyl acetate : n-hexane (EtOAc : HEX) extracts of Mulinum spinosum (5 : 95% EtOAc : HEX, 50 : 50% EtOAc : HEX, 70 : 30% EtOAc : HEX and mix 20 : 80/30 : 70% EtOAc : HEX, 50 : 50/70 : 30/100 : 0% EtOAc : HEX) were assayed against 3 slime-producing S. aureus strains and 2 MRSA strains isolated from nasal carriers. S. aureus ATCC 35556 slime-producing strain and MRSA ATCC 43300 strain were used as controls. The extracts were prepared using flash chromatography. M. spinosum 5 : 95% AcOEt : HEX showed antibacterial effect against all slime-producing strains (MIC: 500 µg/mL) and the highest activity against MRSA strains (MIC: 500 to 1000 µg/mL). All M. spinosum extracts assayed were active against slime-producing S. aureus and MRSA at doses between 500 and 4000 µg/mL. Both, slime-producing S. aureus and MRSA are highly contagious and hardly eradicated by antibiotic therapies. So, there is an increasing need to find new substances with the ability to inhibit these strains.

Description: In microarray studies, the number of samples is relatively small compared to the number of genes per sample. An important aspect of microarray studies is the prediction of patient survival based on their gene expression profile. This naturally calls for the use of a dimension reduction procedure together with the survival prediction model. In this study, a new method based on combining wavelet approximation coefficients and Cox regression was presented. The proposed method was compared with supervised principal component and supervised partial least squares methods. The different fitted Cox models based on supervised wavelet approximation coefficients, the top number of supervised principal components, and partial least squares components were applied to the data. The results showed that the prediction performance of the Cox model based on supervised wavelet feature extraction was superior to the supervised principal components and partial least squares components. The results suggested the possibility of developing new tools based on wavelets for the dimensionally reduction of microarray data sets in the context of survival analysis.

Description: Three recently published trials, MR RESCUE, IMS III, and SYNTHESIS Expansion, evaluating the efficacy and safety of endovascular treatment of acute ischemic stroke have generated concerns about the future of endovascular approach. However, the tremendous evolution that imaging and endovascular treatment modalities have undergone over the past several years has raised doubts about the validity of these trials. In this paper, we review the role of endovascular treatment strategies in acute ischemic stroke and discuss the limitations and shortcomings that prevent generalization of the findings of recent trials. We also provide our experience in endovascular treatment of acute ischemic stroke.

Description: Mean-shift tracking has gained more interests, nowadays, aided by its feasibility of real-time and reliable tracker implementation. In order to reduce background clutter interference to mean-shift object tracking, this paper proposes a novel indicator function generation method. The proposed method takes advantage of two ‘a priori’ knowledge elements, which are inherent to a kernel support for initializing a target model. Based on the assured background labels, a gradient-based label propagation is performed, resulting in a number of objects differentiated from the background. Then the proposed region growing scheme picks up one largest target object near the center of the kernel support. The grown object region constitutes the proposed indicator function and this allows an exact target model construction for robust mean-shift tracking. Simulation results demonstrate the proposed exact target model could significantly enhance the robustness as well as the accuracy of mean-shift object tracking.

Description: In this paper, an adaptive activity and environment recognition algorithm running on a mobile phone is presented. The algorithm makes inferences based on sensor and radio receiver data provided by the phone. A wide set of features that can be extracted from these data sources were investigated, and a Bayesian maximum a posteriori classifier was used for classifying between several user activities and environments. The accuracy of the method was evaluated on a dataset collected in a real-life trial. In addition, comparison to other state-of-the-art classifiers, namely support vector machines and decision trees, was performed. To make the system adaptive for individual user characteristics, an adaptation algorithm for context model parameters was designed. Moreover, a confidence measure for the classification correctness was designed. The proposed adaptation algorithm and confidence measure were evaluated on a second dataset obtained from another real-life trial, where the users were requested to provide binary feedback on the classification correctness. The results show that the proposed adaptation algorithm is effective at improving the classification accuracy.

Description: This paper analyzes the differences in the amount and the structure of residential energy consumption at the provincial level in China and identifies the hidden factors behind such differences. The econometrical analysis reveals that population, economic development level, energy resource endowment and climatic conditions are the main factors driving residential energy consumption; while the regional differences in energy consumption per capita and the consumption structure can be mainly illustrated by various economic development levels, energy resource endowments and climatic conditions. Economic development level has a significant positive impact on the proportion of gasoline consumption, whereas its impact on the proportion of electricity consumption is not notable; energy resource endowment and climatic condition indirectly affect both the proportion of electricity consumption and that of gasoline consumption, primarily through their impacts on the proportions of coal consumption and heat consumption.

Description: A novel wireless and passive surface acoustic wave (SAW) based temperature-compensated vibration sensor utilizing a flexible Y-cut quartz cantilever beam with a relatively substantial proof mass and two one-port resonators is developed. One resonator acts as the sensing device adjacent to the clamped end for maximum strain sensitivity, and the other one is used as the reference located on clamped end for temperature compensation for vibration sensor through the differential approach. Vibration directed to the proof mass flex the cantilever, inducing relative changes in the acoustic propagation characteristics of the SAW travelling along the sensing device, and generated output signal varies in frequency as a function of vibration.  A theoretical mode using the Rayleigh method was established to determine the optimal dimensions of the cantilever beam. Coupling of Modes (COM) model was used to extract the optimal design parameters of the SAW devices prior to fabrication. The performance of the developed SAW sensor attached to an antenna towards applied vibration was evaluated wirelessly by using the precise vibration table, programmable incubator chamber, and reader unit.  High vibration sensitivity of ~10.4 kHz/g, good temperature stability, and excellent linearity were observed in the wireless measurements.

Description: A model is described that can be used to estimate the bulk polarization of largerotating meteoroids in the magnetic field of a neutron star. The results of this model areapplicable to the Supernova Neutrino Amino Acid Processing model, which describes onepossible way in which the amino acids, known in nearly all cases to exhibit supramolecularchirality, could have become enantiomeric.

Description: A two-stage discrete T-S fuzzy model controller, which is formed by a motion controller and a dynamic controller connected in series, is presented to solve UUV (unmanned underwater vehicle) movement control problem for recovering. The motion controller is designed based on the uncertain T-S model and the concept of discrete fuzzy vector. The position error between UUV and moving platform as the input of the motion controller is converted into the speed commands of UUV at the next time. The dynamic controller design is based on the theory of fuzzy region model and a relaxed condition for Lyapunov stabilization function is derived in the form of linear matrix inequalities, which generate force and torque required to complete the recovery task. The feasibility and the efficiency of the proposed control scheme are illustrated through the simulations that UUV follows moving platform.

Description: Unsupervised synthetic aperture radar (SAR) image segmentation is a fundamental preliminary processing step required for sea area detection in military applications. The purpose of this step is to classify large image areas into different segments to assist with identification of the sea area and the ship target within the image. The recently proposed triplet Markov field (TMF) model has been successfully used for segmentation of nonstationary SAR images. This letter presents a hierarchical TMF model in the discrete wavelet domain of unsupervised SAR image segmentation for sea area detection, which we have named the wavelet hierarchical TMF (WHTMF) model. The WHTMF model can precisely capture the global and local image characteristics in the two-pass computation of posterior distribution. The multiscale likelihood and the multiscale energy function are constructed to capture the intrascale and intrascale dependencies in a random field (). To model the SAR data related to radar backscattering sources, the Gaussian distribution is utilized. The effectiveness of the proposed model for SAR image segmentation is evaluated using synthesized and real SAR data.

Description: H-type finned tube heat exchanger elements maintain a high capacity for heat transfer, possess superior self-cleaning properties and retain the ability to effect flue gas waste heat recovery in boiler renovations. In this paper, the heat transfer and pressure drop characteristics of H-type finned tube banks are studied via an experimental open high-temperature wind tunnel system. The effects of fin width, fin height, fin pitch and air velocity on fin efficiency, convective heat transfer coefficient, integrated heat transfer capacity and pressure drop are examined. The results indicate that as air velocity, fin height and fin width increase, fin efficiency decreases. Convective heat transfer coefficient is proportional to fin pitch, but inversely proportional to fin height and fin width. Integrated heat transfer capacity is related to fin efficiency, convective heat transfer coefficient and finned ratio. Pressure drop increases with the increase of fin height and fin width. Finally, predictive correlations of fin efficiency, Nusselt number and Euler Number are developed based on the experimental data.

Description: This paper is devoted to the analysis and design of high performance permanent-magnet synchronous wind generators (PSWGs). A systematic and sequential methodology for the design of PMSGs is proposed with a high performance wind generator as a design model. Aiming at high induced voltage, low harmonic distortion as well as high generator efficiency, optimal generator parameters such as pole-arc to pole-pitch ratio and stator-slot-shoes dimension, etc. are determined with the proposed technique using Maxwell 2-D, Matlab software and the Taguchi method. The proposed double three-phase and six-phase winding configurations, which consist of six windings in the stator, can provide evenly distributed current for versatile applications regarding the voltage and current demands for practical consideration. Specifically, windings are connected in series to increase the output voltage at low wind speed, and in parallel during high wind speed to generate electricity even when either one winding fails, thereby enhancing the reliability as well. A PMSG is designed and implemented based on the proposed method. When the simulation is performed with a 6 Ω load, the output power for the double three-phase winding and six-phase winding are correspondingly 10.64 and 11.13 kW. In addition, 24 Ω load experiments show that the efficiencies of double three-phase winding and six-phase winding are 96.56% and 98.54%, respectively, verifying the proposed high performance operation.

Description: To meet Energy Independence and Security Act (EISA) cellulosic biofuel mandates, the United States will require an annual domestic supply of about 242 million Mg of biomass by 2022. To improve the feedstock logistics of lignocellulosic biofuels in order to access available biomass resources from areas with varying yields, commodity systems have been proposed and designed to deliver quality-controlled biomass feedstocks at preprocessing “depots”. Preprocessing depots densify and stabilize the biomass prior to long-distance transport and delivery to centralized biorefineries. The logistics of biomass commodity supply chains could introduce spatially variable environmental impacts into the biofuel life cycle due to needing to harvest, move, and preprocess biomass from multiple distances that have variable spatial density. This study examines the uncertainty in greenhouse gas (GHG) emissions of corn stover logistics within a bio-ethanol supply chain in the state of Kansas, where sustainable biomass supply varies spatially. Two scenarios were evaluated each having a different number of depots of varying capacity and location within Kansas relative to a central commodity-receiving biorefinery to test GHG emissions uncertainty. The first scenario sited four preprocessing depots evenly across the state of Kansas but within the vicinity of counties having high biomass supply density. The second scenario located five depots based on the shortest depot-to-biorefinery rail distance and biomass availability. The logistics supply chain consists of corn stover harvest, collection and storage, feedstock transport from field to biomass preprocessing depot, preprocessing depot operations, and commodity transport from the biomass preprocessing depot to the biorefinery. Monte Carlo simulation was used to estimate the spatial uncertainty in the feedstock logistics gate-to-gate sequence. Within the logistics supply chain GHG emissions are most sensitive to the transport of the densified biomass, which introduces the highest variability (0.2–13 g CO2e/MJ) to life cycle GHG emissions. Moreover, depending upon the biomass availability and its spatial density and surrounding transportation infrastructure (road and rail), logistics can increase the variability in life cycle environmental impacts for lignocellulosic biofuels. Within Kansas, life cycle GHG emissions could range from 24 g CO2e/MJ to 41 g CO2e/MJ depending upon the location, size and number of preprocessing depots constructed. However, this range can be minimized through optimizing the siting of preprocessing depots where ample rail infrastructure exists to supply biomass commodity to a regional biorefinery supply system.

Description: Microvascular perfusion is commonly used to study the peripheral cardiovascular system. Microvascular blood flow can be continuously and non-invasively monitored with laser speckle contrast imaging (LSCI) or with laser Doppler flowmetry (LDF). These two optical-based techniques give perfusion values in arbitrary units. Our goal is to better understand the perfusion time series given by each technique. For this purpose, we propose a nonlinear complexity analysis of LSCI and LDF time series recorded simultaneously in nine healthy subjects. This is performed through the computation of their multiscale compression entropy. The results obtained with LSCI time series computed from different regions of interest (ROI) sizes are examined. Our findings show that, for LSCI and LDF time series, compression entropy values are less than one for all of the scales analyzed. This suggests that, for all scales, there are repetitive structures within the data fluctuations. Moreover, at the largest scales studied, LDF signals seem to have structures that are different from those Entropy 2014, 16 5778 of Gaussian white noise. By opposition, this is not observed for LSCI time series computed from small ROI sizes

Description: We present a global stability analysis of a Curzon–Ahlborn heat engine considering different regimes of performance. The stability theory is used to construct the Lyapunov functions to prove the asymptotic stability behavior around the steady state of internal temperatures. We provide a general analytic procedure for the description of the global stability by considering internal irreversibilities and a linear heat transfer law at the thermal couplings. The conditions of the global stability are explored for three regimes of performance: maximum power (MP), efficient power (EP) and the so-called ecological function (EF). Moreover, the analytical results were corroborated by means of numerical integrations, which fully validate the properties of the global asymptotic stability.

Description: This paper presents the experimental results the choked flow characteristics of a subcritical refrigerant through a converging-diverging nozzle. A test nozzle with a throat diameter of 2 mm was designed and developed. The influence of operating conditions on the choked flow characteristics, i.e., the pressure profile and mass flow rate under choked flow conditions are investigated. The results indicate that the choked flow occurs in the flow of subcritical refrigerant through nozzles under the normal working conditions of air-conditioners or heat pumps. The pressure drop near the throat is about 80% of the total pressure drop through the nozzle. The critical mass flux is about 19,800 ~ 24,000 kg/(s·m2). The critical mass flow rate increases with increasing the upstream pressure and subcooling. Furthermore, the relative errors between the model predictions and the experimental results for the critical mass flux are also presented. It is found that the deviations of the predictions for homogeneous equilibrium model and Henry-Fauske model from the experimental values are −35% ~ 5% and 15% ~ 35%, respectively

Description: The constantly growing amount ofWeb content and the success of the SocialWeb lead to increasing needs for Web archiving. These needs go beyond the pure preservationo of Web pages. Web archives are turning into “community memories” that aim at building a better understanding of the public view on, e.g., celebrities, court decisions and other events. Due to the size of the Web, the traditional “collect-all” strategy is in many cases not the best method to build Web archives. In this paper, we present the ARCOMEM (From Future Internet 2014, 6 689 Collect-All Archives to Community Memories) architecture and implementation that uses semantic information, such as entities, topics and events, complemented with information from the Social Web to guide a novel Web crawler. The resulting archives are automatically enriched with semantic meta-information to ease the access and allow retrieval based on conditions that involve high-level concepts..

Description: A small planar modified Minkowski fractal antenna is designed and simulated in dual frequency bands (2.4 and 5.8 GHz) for wireless energy harvesting by deep brain stimulation (DBS) devices. The designed antenna, physically being confined inside a miniaturized structure, can efficiently convert the wireless signals in dual ISM frequency bands to the energy source to recharge the DBS battery or power the pulse generator directly. The performance metrics such as the return loss, the specific absorption rate (SAR), and the radiation pattern within skin and muscle-fat-skin tissues are evaluated for the designed antenna. The gain of the proposed antenna is 3.2 dBi at 2.4 GHz and 4.7 dBi at 5.8 GHz; also the averaged SAR of the antenna in human body tissue is found to be well below the legally allowed limit at both frequency bands. The link budget shows the received power at the distance of 25 cm at 2.4 GHz and 5.8 GHz are around 0.4 mW and 0.04 mW, which can empower the DBS implant. The large operational bandwidth, the physical compactness, and the efficiency in wireless signal reception make this antenna suitable in being used in implanted biomedical devices such as DBS pulse generators.

Description: Advancement in wireless sensor network (WSN) technology makes it more attractive technology to be adopted in real world applications including home and industrial automation and e-health or infrastructure monitoring. However the mobility consideration in these applications makes the security requirements an essential and challenging task. To make the communication secure and the network robust against attacks, a proper key management scheme should be used. This paper presents a secure online key establishment and authentication scheme for mobility supported heterogeneous sensor networks. The performance evaluation of the proposed scheme is done using OMNET++ simulator while AVISPA tool is used to validate the security of the proposed scheme. It is clear from the obtained results that the proposed scheme provides better network connectivity at a low cost of memory occupation and communication overhead during the authentication and key establishment phases while improving its network resilience against attacks.

Description: Rapid Resolution Liquid Chromatography coupled with Electrospray Ionization Tandem Mass Spectrometry (RRLC-ESI-MSn) was used to separate and identify related substances in ampicillin capsule. The fragmentation behaviors of related substances were used to identify their chemical structures. Finally, a total of 13 related substances in ampicillin capsule were identified, including four identified components for the first time and three groups of isomers on the basis of the exact mass, fragmentation behaviors, retention time, and chemical structures in the literature. This study avoided time-consuming and complex chemosynthesis of related substances of ampicillin and the results could be useful for the quality control of ampicillin capsule to guarantee its safety in clinic. In the meantime, it provided a good example for the rapid identification of chemical structures of related substances of drugs.

Description: We proposed a robust mean change-point estimation algorithm in linear regression with the assumption that the errors follow the Laplace distribution. By representing the Laplace distribution as an appropriate scale mixture of normal distribution, we developed the expectation maximization (EM) algorithm to estimate the position of mean change-point. We investigated the performance of the algorithm through different simulations, finding that our methods is robust to the distributions of errors and is effective to estimate the position of mean change-point. Finally, we applied our method to the classical Holbert data and detected a change-point.

Description: Authors report on a study using the concept mapping technique in computer engineering education for learning theoretical introductory database topics. In addition, the learning of multilingual technical terminology by means of the collaborative drawing of a concept map is also pursued in this experiment. The main characteristics of a study carried out in the database subject at the University of the Basque Country during the 2011/2012 course are described. This study contributes to the field of concept mapping as these kinds of cognitive tools have proved to be valid to support learning in computer engineering education. It contributes to the field of computer engineering education, providing a technique that can be incorporated with several educational purposes within the discipline. Results reveal the potential that a collaborative concept map editor offers to fulfil the above mentioned objectives.

Description: Recharging implantable electronics from the outside of the human body is very important for applications such as implantable biosensors and other implantable electronics. In this paper, a recharging method for implantable biosensors based on a wearable incoherent light source has been proposed and simulated. Firstly, we develop a model of the incoherent light source and a multi-layer model of skin tissue. Secondly, the recharging processes of the proposed method have been simulated and tested experimentally, whereby some important conclusions have been reached. Our results indicate that the proposed method will offer a convenient, safe and low-cost recharging method for implantable biosensors, which should promote the application of implantable electronics.

Description: Urbanization transforms urban-rural landscape and profoundly affects ecological processes. To maintain a sustainable urbanization, two important issues of land-use need to be quantified: the comprehensive variation of urban-rural construction land and the specific models for consolidating these lands. The purpose of this study is to develop a framework to assess the change of urban-rural construction land and build a decision-support system for consolidating these lands. Four sub-layers were first built in the assessment framework, including the characteristic layer, the coordination layer, the potential layer and the urgency layer. Each layer encompassed specific indices for evaluating the change of urban-rural construction land in different aspects. The entropy method was then applied to the data resources from Landsat TM (Thematic Mapper) images, statistical data and overall land-use and land consolidation planning of Nantong city in coastal China to allocate weightings to the indices in each sub-layer. Finally, the decision-support system was built based on the assessment results and the degree of importance for consolidating urban and rural construction land, respectively. The results of our study show an overall investigation and quantitative description of the change of urban-rural construction land and provide an effective framework for land consolidation and land use management.

Description: The identification and characterization of particulate matter (PM) concentrations from construction site activities pose major challenges due to the diverse characteristics related to different aspects, such as concentration, particle size and particle composition. Moreover, the characterization of particulate matter is influenced by meteorological conditions, including temperature, humidity, rainfall and wind speed. This paper is part of a broader investigation that aims to develop a methodology for assessing the environmental impacts caused by the PM emissions that arise from construction activities. The objective of this paper is to identify and characterize the PM emissions on a construction site with different aerodynamic diameters (PM2.5, PM10, total suspended particulates (TSP)), based on an exploratory study. Initially, a protocol was developed to standardize the construction site selection criteria, laboratory procedures, field sample collection and laboratory analysis. This protocol was applied on a multifamily residential building construction site during three different construction phases (earthworks, superstructure and finishings) aimed at measuring and monitoring PM concentrations arising from construction activities. The particulate matter was characterized in different particle sizes. Results showed that the higher TSP emissions arising from construction activities provoked environmental impacts. Some limitations to the results were identified, especially with regards the need for a detailed investigation about the influence of different construction phases on PM emissions. The findings provided significant knowledge about various situations, serving as a basis for improving the existing methodology for particulate material collection on construction sites and the development of future studies on the specific construction site phases.

Description: With a unique cultural background and fast economic development, China’s adoption of corporate social responsibility (CSR) has become the center of discussion worldwide, and its successful implementation will have great significance for global sustainability. This paper aims to explore how CSR has given way to economic growth in China since the start of economic transition and its cultural, historical and political background, and how this has affected or been affected by the economic performance of firms. Thus, the recent calls for China to adopt CSR in its industries follow a period where the country arguably had one of the strongest implementations of CSR approaches in the world. This transition is considered in the context of a case study of a Chinese state-owned enterprise (SOE) and a group of small private firms in the same industrial sector in Zhengzhou City, Henan Province over a time span of eight years. While the CSR of the SOE has been steadily decreasing along with the change of ownership structure, its economic performance did not improve as expected. On the other hand, with a steady improvement in economic performance, the small private firms are showing a great reluctance to engage in CSR. The results indicate that implementation of CSR in China needs both the manager’s ethical awareness and the change of institutional framework. The results also raise the question as to whether CSR is a universal concept with a desired means of implementation across the developed and developing world.

Description: In this paper, Nd3+–Yb3+–Er3+-doped β-NaYF4 nanocrystals with different Nd3+ concentrations are synthesized, and the luminescence properties of the upconversion nanoparticles (UCNPs) have been studied under 808-nm excitation for sensitive biological applications. The upconversion luminescence spectra of NaYF4 nanoparticles with different dopants under 808-nm excitation proves that the Nd3+ ion can absorb the photons effectively, and the Yb3+ ion can play the role of an energy-transfer bridging ion between the Nd3+ ion and Er3+ ion. To investigate the effect of the Nd3+ ion, the decay curves of the 4S3/2 → 4I15/2 transition at 540 nm are measured and analyzed. The NaYF4: 20% Yb3+, 2% Er3+, 0.5% Nd3+ nanocrystals have the highest emission intensity among all samples under 808-nm excitation. The UC (upconversion) mechanism under 808-nm excitation is discussed in terms of the experimental results.

Description: Based on the deterministic dynamic model of electricity market proposed by Alvarado, a stochastic electricity market model, considering the random nature of demand sides, is presented in this paper on the assumption that generator cost function and consumer utility function are quadratic functions. The stochastic electricity market model is a generalization of the deterministic dynamic model. Using the theory of stochastic differential equations, stochastic process theory, and eigenvalue techniques, the determining conditions of the mean stability for this electricity market model under small Gauss type random excitation are provided and testified theoretically. That is, if the demand elasticity of suppliers is nonnegative and the demand elasticity of consumers is negative, then the stochastic electricity market model is mean stable. It implies that the stability can be judged directly by initial data without any computation. Taking deterministic electricity market data combined with small Gauss type random excitation as numerical samples to interpret random phenomena from a statistical perspective, the results indicate the conclusions above are correct, valid, and practical.

Description: This paper is concerned with the asymptotic behavior for stochastic Gilpin-Ayala competition system. The sufficient conditions for existence of stationary distribution and extinction are established. And a certain asymptotic property of the solution is also obtained. A nontrivial example is provided to illustrate our results.

Description: As the thermal conductivity of thin plates composed of tightly compressed heterogeneous layers varies continuously in the form of an exponential function, we present a nonlinear dynamical model of the fractal growth of thermal diffusion. We also analyze the quantitative relationship between the probability of growth and the disturbance term, predict the control action of the environmental disturbance term on fractal growth, and use Matlab simulation to verify the control effectiveness of thermal fractal diffusion. The results facilitate the selection of appropriate control areas and control parameters for the thermal diffusion variable coefficients. In addition, variation in the fractal dimension reflects the influence of environmental disturbance on the complex process of thermal fractal diffusion.

Description: This paper mainly discusses some dynamics asymptotic properties of autoregressive processes. By using the -dependence of random variables, we prove the least squares (LS) estimator of the unknown parameters satisfies the law of iterated logarithm.

Description: This paper proposes a space-time block coding (STBC) transmission scheme for asynchronous cooperative systems. By combination of rotated complex constellations and Hadamard transform, these constructed codes are capable of achieving full cooperative diversity with the analysis of the pairwise error probability (PEP). Due to the asynchronous characteristic of cooperative systems, orthogonal frequency division multiplexing (OFDM) technique with cyclic prefix (CP) is adopted for combating timing delays from relay nodes. The total transmit power across the entire network is fixed and appropriate power allocation can be implemented to optimize the network performance. The relay nodes do not require decoding and demodulation operation, resulting in a low complexity. Besides, there is no delay for forwarding the OFDM symbols to the destination node. At the destination node the received signals have the corresponding STBC structure on each subcarrier. In order to reduce the decoding complexity, the sphere decoder is implemented for fast data decoding. Bit error rate (BER) performance demonstrates the effectiveness of the proposed scheme.

Description: We investigate the multiple attribute decision making (MADM) problems in which attribute values take the form of interval-valued dual hesitant fuzzy information. Firstly, some operational laws for interval-valued dual hesitation fuzzy elements (IVDHFEs) based on Einstein operations are developed. Then we develop some aggregation operators based on Einstein operations: the interval-valued dual hesitant fuzzy Einstein weighted averaging (IVDHFEWA) operator, interval-valued dual hesitant fuzzy Einstein ordered weighted averaging (IVDHFEOWA) operator, interval-valued dual hesitant fuzzy Einstein hybrid averaging (IVDHFEHA) operator, interval-valued dual hesitant fuzzy Einstein weighted geometric (IVDHFEWG) operator, interval-valued dual hesitant fuzzy Einstein ordered weighted geometric (IVDHFEOWG) operator, and interval-valued dual hesitant fuzzy Einstein hybrid geometric (IVDHFEHG) operator. Furthermore, we discuss some desirable properties of these operators, and investigate the relationship between the developed operators and the existing ones. Based on the IVDHFEWA operator, an approach to MADM problems is proposed under the interval-valued dual hesitant fuzzy environment. Finally, a numerical example is given to show the application of the developed method, and a comparison analysis is conducted to demonstrate the effectiveness of the proposed approach.

Description: In the context of anomaly detection in cyber physical systems (CPS), spatiotemporal correlations are crucial for high detection rate. This work presents a new quarter sphere support vector machine (QS-SVM) formulation based on the novel concept of attribute correlations. Our event detection approach, SensGru, groups multiple sensors on a single node and thus eliminates communication between sensor nodes without compromising the advantages of spatial correlation. It makes use of temporal-attribute (TA) correlations and is thus a TA-QS-SVM formulation. We show analytically that SensGru (or interchangeably TA-QS-SVM) results in a reduced node density and gives the same event detection performance as more dense Spatiotemporal-Attribute Quarter-Sphere SVM (STA-QS-SVM) formulation which exploits both spatiotemporal and attribute correlations. Moreover, this paper develops theoretical bounds on the internode distance, the optimal number of sensors, and the sensing range with SensGru so that the performance difference with SensGru and STA-QS-SVM is negligibly small. Both schemes achieve event detection rates as high as 100% and an extremely low false positive rate.

Description: In order to realize the high accuracy attitude control of satellite with flexible appendages, attitude control system consisting of the controller and structural filter was designed. When the low order vibration frequency of flexible appendages is approximating the bandwidth of attitude control system, the vibration signal will enter the control system through measurement device to bring impact on the accuracy or even the stability. In order to reduce the impact of vibration of appendages on the attitude control system, the structural filter is designed in terms of rejecting the vibration of flexible appendages. Considering the potential problem of in-orbit frequency variation of the flexible appendages, the design method for the adaptive notch filter is proposed based on the in-orbit identification technology. Finally, the simulation results are given to demonstrate the feasibility and effectiveness of the proposed design techniques.