ALBERT

Description: We estimate the contamination risks from the atmospheric dispersion of radionuclides released by severe nuclear power plant accidents using the ECHAM/Modular Earth Submodel System (MESSy) atmospheric chemistry (EMAC) atmospheric chemistry-general circulation model at high resolution (50 km). We present an overview of global risks and also a case study of nuclear power plants that are currently under construction, planned and proposed in the Eastern Mediterranean and Middle East, a region prone to earthquakes. We implemented continuous emissions from each location, making the simplifying assumption that all potential accidents release the same amount of radioactivity. We simulated atmospheric transport and decay, focusing on 137Cs and 131I as proxies for particulate and gaseous radionuclides, respectively. We present risk maps for potential surface layer concentrations, deposition and doses to humans from the inhalation exposure of 131I. The estimated risks exhibit seasonal variability, with the highest surface level concentrations of gaseous radionuclides in the Northern Hemisphere during winter.

Description: The long-lived pioneer species Pericopsis elata is one of the rare tropical timbers on the list of the Convention on International Trade of Endangered Species, supporting the need for accurate and reliable growth data. In one planted and one natural forest in the Democratic Republic of Congo, respectively four and 37 Pericopsis stem disks were collected. The tree-ring series of planted trees were used to confirm annual tree-ring formation. For the natural forest, a tree-ring chronology with 24 stem disks ranged from 1852 up to 2008. This chronology was compared with time-series of local precipitation, resulting in a significant correlation with the second half of the rainy season (September–November). This seasonal precipitation was related with sea surface temperatures of the West Indian Ocean. Higher precipitation during El Niño years corresponded with higher tree-ring indices but differences were not significant. In addition, pointer years were rare and did not have a consistent link with extreme climatic conditions. The existence of annual tree rings encourages further tree-ring analyses of P. elata and other flagship timber species in order to further document climate-growth responses and to provide the long-term framework that is needed for sustainable management planning.

Description: Current earthquake early warning (EEW) systems lack the ability to appropriately handle multiple concurrent earthquakes, which led to many false alarms during the 2011 Tohoku earthquake sequence in Japan. This paper uses a Bayesian probabilistic approach to handle multiple concurrent events for EEW. We implement the theory using a two-step algorithm. First, an efficient approximate Bayesian model class selection scheme is used to estimate the number of concurrent events. Then, the Rao-Blackwellized Importance Sampling method with a sequential proposal probability density function is used to estimate the earthquake parameters, that is hypocentre location, origin time, magnitude and local seismic intensity. A real data example based on 2 months data (2011 March 9–April 30) around the time of the 2011 M 9 Tohoku earthquake is studied to verify the proposed algorithm. Our algorithm results in over 90 per cent reduction in the number of incorrect warnings compared to the existing EEW system operating in Japan.

Description: Admixture mapping has been enormously resourceful in identifying genetic variations linked to phenotypes, adaptation, and diseases. In this study through analysis of copy number variable regions (CNVRs), we report extensive restructuring in the genomes of the recently admixed African-Indian population (OG-W-IP) that inhabits a highly saline environment in Western India. The study included subjects from OG-W-IP (OG), five different Indian and three HapMap populations that were genotyped using Affymetrix version 6.0 arrays. Copy number variations (CNVs) detected using Birdsuite were used to define CNVRs. Population structure with respect to CNVRs was delineated using random forest approach. OG genomes have a surprising excess of CNVs in comparison to other studied populations. Individual ancestry proportions computed using STRUCTURE also reveals a unique genetic component in OGs. Population structure analysis with CNV genotypes indicates OG to be distant from both the African and Indian ancestral populations. Interestingly, it shows genetic proximity with respect to CNVs to only one Indian population IE-W-LP4, which also happens to reside in the same geographical region. We also observe a significant enrichment of molecular processes related to ion binding and receptor activity in genes encompassing OG-specific CNVRs. Our results suggest that retention of CNVRs from ancestral natives and de novo acquisition of CNVRs could accelerate the process of adaptation especially in an extreme environment. Additionally, this population would be enormously useful for dissecting genes and delineating the involvement of CNVs in salt adaptation.

Description: We present a catalogue of 2D, point spread function-corrected de Vacouleurs, Sérsic, de Vacouleurs+Exponential, and Sérsic+Exponential fits of ~7 x 10 5 spectroscopically selected galaxies drawn from the Sloan Digital Sky Survey (SDSS) Data Release 7. Fits are performed for the SDSS r band utilizing the fitting routine galfit and analysis pipeline pymorph . We compare these fits to prior catalogues. Fits are analysed using a physically motivated flagging system. The flags suggest that more than 90 per cent of two-component fits can be used for analysis. We show that the fits follow the expected behaviour for early and late galaxy types. The catalogues provide a robust set of structural and photometric parameters for future galaxy studies. We show that some biases remain in the measurements, e.g. the presence of bars significantly affect the bulge measurements although the bulge ellipticity may be used to separate barred and non-barred galaxies, and about 15 per cent of bulges of two-component fits are also affected by resolution. The catalogues are available in electronic format. We also provide an interface for generating postage stamp images of the 2D model and residual as well as the 1D profile. These images can be generated for a user-uploaded list of galaxies on demand.

Description: Our aim is to explore general practitioners’ (GPs’) knowledge about EMF, and to assess whether different knowledge structures are related to the GPs’ concern about EMF. Random samples were drawn from lists of GPs in Germany in 2008. Knowledge about EMF was assessed by seven items. A latent class analysis was conducted to identify latent structures in GPs’ knowledge. Further, the GPs’ concern about EMF health risk was measured using a score comprising six items. The association between GPs’ concern about EMF and their knowledge was analysed using multiple linear regression. In total 435 (response rate 23.3%) GPs participated in the study. Four groups were identified by the latent class analysis: 43.1% of the GPs gave mainly correct answers; 23.7% of the GPs answered low frequency EMF questions correctly; 19.2% answered only the questions relating EMF with health risks, and 14.0% answered mostly “don’t know”. There was no association between GPs’ latent knowledge classes or between the number of correct answers given by the GPs and their EMF concern, whereas the number of incorrect answers was associated with EMF concern. Greater EMF concern in subjects with more incorrect answers suggests paying particular attention to misconceptions regarding EMF in risk communication.

Description: This study aims to explore the efficiency of using online education as an intervention measure to prevent occupational hazards in a clinical nursing setting. The subjects were 320 female nursing staff from two hospitals in Taiwan. The questionnaire results indicated that the subjects primarily experienced human factor occupational hazards, as well as psychological and social hazards. Specifically, 73.1% and 69.8% of the subjects suffered from poor sleep quality and low back pain, respectively. After web-based learning, the experimental group had higher post-test scores than the control group in terms of knowledge, attitudes, and practices (KAP). However, there was only a significant difference (p 〈 0.05) in their knowledge about the prevention of occupational hazards. It is suggested that an online discussion may enhance nursing staff’s participation in web-based learning, and further facilitate their comments on negative factors. The findings can highly promote nursing staff’s attitudes and practices toward preventing occupational hazards through web-based learning.

Description: Ambient particulate matters and temperature were reported to have additive effects over the respiratory disease hospital admissions and deaths. The purpose of this study is to discuss the interactive pulmonary toxicities of cold stress and fine particulate matter (PM2.5) exposure by estimating inflammation and oxidative stress responses. 48 Wistar male rats, matched by weight and age, were randomly assigned to six groups, which were treated with cold stress alone (0 °C, 10 °C, and 20 °C (Normal control)) and cold stresses plus PM2.5 exposures respectively. Cold stress alone groups were intratracheal instillation of 0.25 mL normal saline, while cold stress plus PM2.5 exposure groups were intratracheal instillation of 8 mg/0.25 mL PM2.5. These procedures were carried out for three times with an interval of 48 hours for each treatment. All rats were sacrificed after 48 hours of the third treatment. The bronchoalveolar lavage fluid (BALF) was collected for analyzing inflammatory cells and cytokines, and lung homogenate MDA was determined for oxidative stress estimation. Results showed higher level of total cell and neutrophil in the BALF of PM2.5 exposed groups (p 〈 0.05). Negative relationships between cold stress intensity and the level of tumor necrosis factor alpha (TNF-a), C-reactive protein (CRP) interleukin-6 (IL-6) and interleukin-8 (IL-8) in BALF were indicated in PM2.5 exposure groups. Exposure to cold stress alone caused significant increase of inflammatory cytokines and methane dicarboxylic aldehyde (MDA) and decline of superoxide dismutase (SOD) and glutathione peroxidase (GSH-Px) activity only in 0 °C exposure group (p 〈 0.05). The two-way ANOVA found significant interactive effects between PM2.5 exposure and cold stress in the level of neutrophil, IL-6 and IL-8 and SOD activity (p 〈 0.05). These data demonstrated that inflammation and oxidative stress involved in the additive effect of PM2.5 exposure and cold stress on pulmonary toxicity, providing explanation for epidemiological studies on the health effect of ambient PM2.5 and cold stress.

Description: This paper presents a detailed description of an approach designed to investigate the application of the Health Impact Assessment (HIA) framework to assess the potential health impacts of climate change. A HIA framework has been combined with key climate change terminology and concepts. The fundamental premise of this framework is an understanding of the interactions between people, the environment and climate. The diversity and complexity of these interactions can hinder much needed action on the critical health issue of climate change. The objectives of the framework are to improve the methodology for understanding and assessing the risks associated with potential health impacts of climate change, and to provide decision-makers with information that can facilitate the development of effective adaptation plans. While the process presented here provides guidance with respect to this task it is not intended to be prescriptive. As such, aspects of the process can be amended to suit the scope and available resources of each project. A series of working tables has been developed to assist in the collation of evidence throughout the process. The framework has been tested in a number of locations including Western Australia, Solomon Islands, Vanuatu and Nauru.

Description: Charge generation in a typical intermediate connector, composed of “n-type doped layer/transition metal oxide (TMO)/hole transporting layer (HTL),” of a tandem organic light-emitting device (OLED) has recently been found to arise from charge transfer at the TMO/HTL interfaces. In this paper, we investigate the effect of hole injection barriers from intermediate connectors on the performance of tandem OLEDs. The hole injection barriers are caused by the offset of the highest occupied molecular orbital (HOMO) energy levels between HTLs contained in the intermediate connector and the top electroluminescence (EL) unit. We also find that although charge generation can occur at the interfaces between the TMO and a wide variety of HTLs of different HOMO values, an increase in the hole injection barrier however limits the electroluminescence efficiency of the top EL units. In the case of large hole injection barriers, significant charge accumulation in the HTLs makes the intermediate connector lose its functionality gradually over operating time, and limits device stability.

Description: Spin-dependent transport properties in CoFe/MgO/n + -Si junctions were investigated by Hanle effect measurements and inelastic electron tunneling (IET) spectroscopy. The CoFe/MgO/n + -Si junctions examined in this study exhibited two different Hanle curves. In the low bias region, broad Hanle signals were mainly observed; in the high bias region, narrow Hanle signals were mainly observed. The d 2 I / dV 2 - V curves (which correspond to IET spectra) contain several peaks originating from phonon modes and other peaks originating from electron trap states. At the bias voltage where electron trap states are observed, Δ d 2 I / dV 2 depends on the magnetic field and the full width at half-maximum of the Δ d 2 I / dV 2 – H curves corresponds to that of the broad Hanle signals. These results indicate that electron trap states are located in the low energy region and cause a decrease in spin lifetime.

Description: We elucidate a strong room temperature stimulated emission (SE) of In 0.17 Ga 0.83 N epilayer grown by molecular beam epitaxy under the subpicosecond pulse excitation. The SE peak at 428 nm emerges on the higher energy side of the spontaneous emission in photoluminescence spectra when the excitation density exceeds the threshold of ∼3.68 mJ/cm 2 . Nondegenerate transient differential reflectivity measurements show that a multi-stage carrier thermalization from excited states to localized edge states and stimulated emission dominate the decay processes of photogenerated carriers under various excitation densities. Our results indicate that the existence of phonon bottleneck effect could result in a slow thermalization process in the InGaN material even under the condition of stimulated emission.

Description: The relationship between carrier concentration and donor atomic concentration has been determined in n -type Ge films doped with P. The samples were carefully engineered to minimize non-active dopant incorporation by using specially designed P(SiH 3 ) 3 and P(GeH 3 ) 3 hydride precursors. The in situ nature of the doping and the growth at low temperatures, facilitated by the Ge 3 H 8 and Ge 4 H 10 Ge sources, promote the creation of ultra-low resistivity films with flat doping profiles that help reduce the errors in the concentration measurements. The results show that Ge deviates strongly from the incomplete ionization expected when the donor atomic concentration exceeds N d  = 10 17  cm −3 , at which the energy separation between the donor and Fermi levels ceases to be much larger than the thermal energy. Instead, essentially full ionization is seen even at the highest doping levels beyond the solubility limit of P in Ge. The results can be explained using a model developed for silicon by Altermatt and coworkers, provided the relevant model parameter is properly scaled. The findings confirm that donor solubility and/or defect formation, not incomplete ionization, are the major factors limiting the achievement of very high carrier concentrations in n -type Ge. The commercially viable chemistry approach applied here enables fabrication of supersaturated and fully ionized prototypes with potential for broad applications in group-IV semiconductor technologies.

Description: We developed a T-gate technology based on selective wet etching yielding 200 nm wide T-gate structures used for fabrication of High Electron Mobility Transistors (HEMT). Major advantages of our process are the use of only standard photolithographic process and the ability to generate T-gate stacks. A HEMT fabricated on AlGaN/GaN/sapphire with gate length L g  = 200 nm and double-stacked T-gates exhibits 60 GHz cutoff frequency showing ten-fold improvement compared to 6 GHz for the same device with 2  μ m gate length. HEMTs with a double-level-T-gate (DLTG) structure exhibit up to 35% improvement of f max value compared to a single T-gate device. This indicates a significant reduction of skin effect losses in DLTG structure compared to its standard T-gate counterpart. These results agree with the theoretical predictions.

Description: This investigation analyzes the effect of vortex wakes on the Lagrangian displacement of particles induced by the passage of an obstacle in a two-dimensional incompressible and inviscid fluid. In addition to the trajectories of individual particles, we also study their drift and the corresponding total drift areas in the Föppl and Kirchhoff potential flow models. Our findings, which are obtained numerically and in some regimes are also supported by asymptotic analysis, are compared to the wakeless potential flow which serves as a reference. We show that in the presence of the Föppl vortex wake, some of the particles follow more complicated trajectories featuring a second loop. The appearance of an additional stagnation point in the Föppl flow is identified as a source of this effect. It is also demonstrated that, while the total drift area increases with the size of the wake for large vortex strengths, it is actually decreased for small circulation values. On the other hand, the Kirchhoff flow model is shown to have an unbounded total drift area. By providing a systematic account of the wake effects on the drift, the results of this study will allow for more accurate modeling of hydrodynamic stirring.

Description: The magnetic configuration of Mn 2 NiAl ribbon has been investigated. In contrast to Ni 2 MnAl, the compound Mn 2 NiAl with considerable disorder does exhibit ferromagnetism and, due to exchange interaction competition, both ferromagnetic and antiferromagnetic moment orientations can coexist between nearest neighbor Mn atoms. This is unexpected in Heusler alloys. Regarding the mechanism of the martensitic transformation in Mn 50 Ni 50− x Al x , it is found that increasing the Al content results in an unusual change in the lattice constant, a decrease of the transformation entropy change, and enhancement of the calculated electron localization. These results indicate that the p-d covalent hybridization between Mn (or Ni) and Al atoms gradually increases at the expense of the d-d hybridization between Ni and Mn atoms. This leads to an increased stability of the austenite phase and a decrease of the martensitic transformation temperature. For 11 ≤  x  ≤ 14, Mn 50 Ni 50− x Al x ferromagnetic shape memory alloys are obtained.

Description: Electrowetting (EW) has applications including displays, microactuation, miniaturized chemistry, adaptive optics, and energy harvesting—understanding the physics of EW junctions is of key importance. Here, the roles of semiconductor space-charge and electric double layer in continuous EW at an electrolyte-insulator-semiconductor junction are considered. A model is formulated in terms of experimental parameters—applied voltage, zero-bias wetting contact angle, semiconductor type and doping, insulator thickness and dielectric constant, and electrolyte concentration and dielectric constant. The model predicts, and experiments indicate, that the EW behavior is diminished for low concentration solutions (∼1–10 nM) and lowly doped silicon (10 14 –10 15  cm −3 ).

Description: The dynamics of the magnetic relaxation process during the sustainment of spheromak configurations at different helicity injection rates is studied. The three-dimensional activity is recovered using time-dependent resistive magnetohydrodynamic simulations. A cylindrical flux conserver with concentric electrodes is used to model configurations driven by a magnetized coaxial gun. Magnetic helicity is injected by tangential boundary flows. Different regimes of sustainment are identified and characterized in terms of the safety factor profile. The spatial and temporal behavior of fluctuations is described. The dynamo action is shown to be in close agreement with existing experimental data. These results are relevant to the design and operation of helicity injected devices, as well as to basic understanding of the plasma relaxation mechanism in quasi-steady state.

Description: The present experiments were performed on the PF-1000 plasma focus device at a current of 2 MA with the deuterium injected from the gas-puff placed in the axis of the anode face. The XUV frames showed, in contrast with the interferograms, the fine structure: filaments and spots up to 1 mm diameter. In the deuterium filling, the short filaments are registered mainly in the region of the internal plasmoidal structures and their number correlates with the intensity of neutron production. The longer filamentary structure was recorded close to the anode after the constriction decay. The long curve-like filaments with spots were registered in the big bubble formed after the pinch phase in the head of the umbrella shape of the plasma sheath. Filaments can indicate the filamentary structure of the current in the pinch. Together with the filaments, small compact balls a few mm in diameter were registered by both interferometry and XUV frame pictures. They emerge out of the dense column and their life-time can be greater than hundreds of ns.

Description: The radiation pressure acceleration of protons in the interaction of Gaussian laser pulses and surface modulated targets is examined by multi-dimensional particle-in-cell simulations. It is shown that strong longitudinal quasi-static magnetic field is generated on the modulated surface of the target, which significantly enhances the transverse diffusion of electrons. This is beneficial for suppressing the transverse Rayleigh-Taylor instability. Finally, the surface of the accelerated proton beams becomes smoother than that in the case of the planar target, and a final mono-energetic proton beam is obtained by using the surface modulated target.

Description: We have studied the impact dynamics of non-Newtonian droplets containing poly-(ethylene oxide) (PEO) by using a high speed camera. To get a deeper insight into the droplet-substrate interaction on droplet impact behavior, both the bare droplet and the liquid marbles have been investigated. The usually observed anti-rebound phenomenon caused by the PEO additives can be rejuvenated by enwrapment of droplets with nanoparticles. The presence of PEO in bare droplets greatly enhances the contact line friction and leads to irreversible impalement of the surface structure. Whereas for liquid marbles, the nanoparticle shell on the droplet surface inhibits the impalement. Our results clearly demonstrate that it is the droplet-substrate friction rather than the bulk rheological properties of the liquid that plays the essential role in the anti-rebound effect.

Description: One of the most uncertain parameters in stepped spillway design is the length (from the crest) of boundary layer development. The normal velocity profiles responding to the steps as bed roughness are investigated in the developing non-aerated flow region. A detailed analysis of the logarithmic vertical velocity profiles on stepped spillways is conducted through experimental data to verify the computational code and numerical experiments to expand the data available. To determine development length, the hydraulic roughness and displacement thickness, along with the shear velocity, are needed. This includes determining displacement height d and surface roughness length z0 and the relationship of d and z0 to the step geometry. The results show that the hydraulic roughness height ks is the primary factor on which d and z0 depend. In different step height, step width, discharge and intake Froude number, the relations d/ks = 0.22–0.27, z0/ks = 0.06–0.1 and d/z0 = 2.2–4 result in a good estimate. Using the computational code and numerical experiments, air inception will occur over stepped spillway flow as long as the Bauer-defined boundary layer thickness is between 0.72 and 0.79.

Description: A regional-level and dimensionless analysis for designing a domestic rainwater harvesting system (DRWHS) was developed. To consider various combinations of water demand, storage capacity, effective roof area, and rainfall in DRWHS design, two dimensionless ratios were used, namely, demand fraction and storage fraction, along with a relationship between the two ratios. Firstly, Northern Taiwan was divided into four sub-regions through cluster analysis based on the average annual 10-day rainfall distribution at rainfall stations and administrative districts. Easy-to-use dimensionless curves between demand fraction and storage fraction were obtained for five rainwater supply reliabilities of the DRWHS for the four sub-regions. Based on the dimensionless curves, a nomogram was constructed for designing DRWHSs at a rainwater supply reliability of 95% in the sub-region I. Storage capacities determined from the dimensionless curves showed a close fit with those determined from simulated values, but were larger than the values estimated from the method presented in the Green Building Evaluation Manual in most situations. The methodology developed herein can be used effectively for the preliminary design of a DRWHS and for overcoming the difficulties faced in designing a DRWHS without rainfall data and with incomplete rainfall data.

Description: We present new narrow-band (Hα and [O  iii ]) images and optical spectrophotometry of H  ii regions for a gas-rich low-surface-brightness irregular galaxy, KKR 17. The central surface brightness of the galaxy is μ 0 ( B ) = 24.15 ± 0.03 mag s –2 . The galaxy was detected by the Arecibo Legacy Fast ALFA survey (ALFALFA). Its mass is dominated by neutral hydrogen (H  i ) gas. In contrast, both the stellar masses of the bright H  ii and diffuse stellar regions are small. In addition, the fit to the spectral energy distribution to each region shows the stellar populations of H  ii and diffuse regions are different. The bright H  ii region contains a large fraction of O-type stars, revealing recent strong star formation, whereas the diffuse region is dominated by median age stars with a typical age of ~600 Myr. Using McGaugh's abundance model, we found that the average metallicity of KKR 17 is 12 + (O/H) = 8.0 ± 0.1. The star-formation rate of KKR 17 is 0.21 ± 0.04 M  yr –1 , which is ~1/5 of our Milky Way's. Based on the analysis results for young stellar clusters in the H  ii region, the bright H  ii region has two sub-components with different velocities and metallicities. This may be caused by the outflow of massive stars or merging events. However, the mechanism triggering star formation in the H  ii region is still uncertain.

Description: We review the results of the 1988 multiwavelength campaign on the late-type eclipsing binary YY Geminorum. Observations include: broad-band optical and near-infrared photometry, simultaneous optical and ultraviolet ( IUE ) spectroscopy, X-ray ( Ginga ) and radio (VLA) data. From models fitted to the optical light curves, fundamental physical parameters have been determined together with evidence for transient maculations (spots) located near quadrature longitudes and intermediate latitudes. Eclipses were observed at optical, ultraviolet and radio wavelengths. Significant drops in 6 cm radio emission near the phases of both primary and secondary eclipse indicate relatively compact radio emitting volumes that may lie between the binary components. IUE observations during secondary eclipse are indicative of a uniform chromosphere saturated with Mg  ii emission and an extended volume of Lyα emission. Profile fitting of high-dispersion Hα spectra confirms the chromospheric saturation and indicates significant Hα opacity to heights of a few per cent of the photospheric radius. There is evidence for an enhanced Hα emission region visible near phase 0.25–0.35 which may be associated with a large spot on the primary and with two small optical flares which were also observed at other wavelengths: one in microwave radiation and the other in X-rays. For both flares, L X / L opt is consistent with energy release in closed magnetic structures.

Description: The dependence of divertor asymmetry and scrape-off layer (SOL) flow on heating power has been investigated in the Experimental Advanced Superconducting Tokamak (EAST). Divertor plasma exhibits an outboard-enhanced in-out asymmetry in heat flux in lower single null configuration for in reversed (ion ∇ B drift direction toward the upper X-point) field directions. Upper single null exhibits an inboard-favored asymmetry in low heating power condition, while exhibits an outboard-favored asymmetry when increasing the heating power. Double null has the strongest in-out asymmetry in heat flux, favoring the outer divertor. The in-out asymmetry ratios of q t , out / q t , in and P out / P total increase with the power across the separatrix P loss , which is probably induced by the enhanced radial particle transport due to a large pressure gradient. The characteristics of the measured SOL parallel flow under various discharge conditions are consistent with the Pfirsch-Schlüter (PS) flow with the parallel Mach number M ∥ decreasing with the line averaged density but increasing with P loss , in the same direction as the PS flow. The contributions of both poloidal E × B drift and parallel flow on poloidal particle transport in SOL on EAST are also assessed.

Description: Magnetic islands have been implemented in the gyrokinetic toroidal code to study the effects of the islands on microturbulence. The pressure profile flattening is verified in the simulation with the islands. Simulations of ion temperature gradient instability find that different toroidal modes are linearly coupled together and that toroidal spectra become broader when the island width increases. The real frequencies and growth rates of different toroidal modes approach each other with the averaged value independent of the island width. The linear mode structures are enhanced at the island separatrices and weakened at the island centers, consistent with the flattening of the pressure profile inside the islands.

Description: The slow motion of a circular cylinder in a plane Poiseuille flow in a microchannel is analyzed for a wide range of cylinder radii and positions across the channel. The cylinder translates parallel to the channel walls and rotates about its axis. The Stokes approximation is used and the problem is solved analytically using the Papkovich-Fadle eigenfunction expansion and the least-squares method. The stream function and the pressure distribution of the flow field are obtained as results. The force and moment exerted on the cylinder, and the pressure change far from the cylinder, are calculated and shown as functions of the size and location of the cylinder. The results confirm some reciprocal relations exactly. In particular, the translational and rotational velocities of the drifting cylinder in the existing Poiseuille flow are determined. The induced pressure change, when the cylinder drifts in the Poiseuille flow, is also calculated. Some typical streamline patterns, depending on the size and location of the cylinder, are shown and discussed. When the cylinder translates and/or rotates in the channel blocked at infinity, a series of Moffatt eddies appears far from the cylinder in the channel, as expected.

Description: Interactions between capillary and elastic effects are relevant to a variety of applications from micro- and nano-scale manufacturing to biological systems. In this work, we investigate capillary flows in flexible, millimeter-scale cylindrical elastic tubes. We demonstrate that surface tension can cause sufficiently flexible tubes to collapse and coalesce spontaneously through non-axisymmetric buckling, and develop criteria for the initial deformation and complete collapse of a circular tube. Experimental results for capillary rise and evaporation of a liquid in a flexible tube are presented, and several regimes are seen for the equilibrium state of a flexible tube deforming under capillary pressure. Deformations of the tube walls are measured in different regimes and compared with a shell theory model. Analysis and experimental results show that despite the complex and non-axisymmetric deformed shapes of cylindrical structures, the elastocapillary length used in previous literature for flat plates and sheets can be used to predict the behavior of flexible tubes.

Description: A study is presented for the oblique propagation of ion acoustic cnoidal waves in a magnetized plasma consisting of cold ions and two temperature superthermal electrons modelled by kappa-type distributions. Using the reductive perturbation method, the nonlinear Korteweg de-Vries equation is derived, which further gives the solutions with a special type of cnoidal elliptical functions. Both compressive and rarefactive structures are found for these cnoidal waves. Nonlinear periodic cnoidal waves are explained in terms of plasma parameters depicting the Sagdeev potential and the phase curves. It is found that the density ratio of hot electrons to ions μ significantly modifies compressive/refractive wave structures. Furthermore, the combined effects of superthermality of cold and hot electrons κ c , κ h , cold to hot electron temperature ratio σ , angle of propagation and ion cyclotron frequency ω ci have been studied in detail to analyze the height and width of compressive/refractive cnoidal waves. The findings in the present study could have important implications in understanding the physics of electrostatic wave structures in the Saturn's magnetosphere where two temperature superthermal electrons are present.

Description: A smart monitoring system for superconducting cable test is proposed with an adaptive current control of a superconducting transformer secondary. The design, based on Fuzzy Gain Scheduling, allows the controller parameters to adapt continuously, and finely, to the working variations arising from transformer nonlinear dynamics. The control system is integrated in a fully digital control loop, with all the related benefits, i.e., high noise rejection, ease of implementation/modification, and so on. In particular, an accurate model of the system, controlled by a Fuzzy Gain Scheduler of the superconducting transformer, was achieved by an experimental campaign through the working domain at several current ramp rates. The model performance was characterized by simulation, under all the main operating conditions, in order to guide the controller design. Finally, the proposed monitoring system was experimentally validated at European Organization for Nuclear Research (CERN) in comparison to the state-of-the-art control system [P. Arpaia, L. Bottura, G. Montenero, and S. Le Naour, “Performance improvement of a measurement station for superconducting cable test,” Rev. Sci. Instrum.83, 095111 (2012)] of the Facility for the Research on Superconducting Cables, achieving a significant performance improvement: a reduction in the system overshoot by 50%, with a related attenuation of the corresponding dynamic residual error (both absolute and RMS) up to 52%.

Description: This paper presents a method which uses the characteristics of the etch pits induced in a polyallyl-diglycol-carbonate (PADC) detector of the CR-39/PM-355 type to estimate particle energy. This method is based on the data provided by a semiautomatic system that selects tracks according to two parameters, crater diameters, and mean gray level values. In this paper we used the results of the calibration measurements that were obtained in our laboratory in the period 2000–2014. Combining the information on the two parameters it is possible to determine unambiguously the incident projectile energy values. The paper presents the results of an attempt to estimate the energy resolution of the method when analyzing the tracks produced in the CR-39/PM-355 detector by energetic ions such as alpha particles, protons, and deuterons. We discuss the energy resolution of the measurement of light charged particle energy which is based on the parameters (crater diameter and mean gray level value) of tracks induced in solid state nuclear track detectors of the PADC type.

Description: In this work, an automated apparatus for driving single electrostatic probes and acquiring the plasma-related data has been designed and fabricated. The voltage range of the present system is ±110 V with an adjustable voltage step as low as 3 mV. Voltage and current measurements are carried out with high resolution and high accuracy circuits, both based on 16 bit analog-to-digital converters. The code embedded in a micro-controller, schedules the operation of the device and transfers the experimental data to a personal computer. The modular design of the system makes possible its modification and thus increases its adaptability to different plasma setups. Finally, the reliable operation of the entire device is confirmed by tests in Electron Cyclotron Resonance plasma.

Description: For magnon spintronic applications, the detailed knowledge of spin wave (SW) beam dispersion, transmission (reflection) of SWs passing through (reflected from) interfaces, or borders or the scattering of SWs by inhomogeneities is crucial. These wave properties are decisive factors on the usefulness of a particular device. Here, we demonstrate, using micromagnetic simulations supported by an analytical model, that the Goos-Hänchen (GH) shift exists for SW reflecting from thin film edge and that with the effect becomes observable. We show that this effect will exist for a broad range of frequencies in the dipole-exchange range, with the magnetization degree of pinning at the film edge as the crucial parameter, whatever its nature. Moreover, we have also found that the GH effect can be accompanied or even dominating by a bending of the SW beam due to the inhomogeneity of the internal magnetic field. This inhomogeneity, created by demagnetizing field taking place at the film edge, causes gradual change of SWs refractive index. The refraction of the SW beams by the non-uniformity of the magnetic field enables the exploration of graded index magnonics and metamaterial properties for the transmission and processing of information at nanoscale.

Description: As a non-magnetic heavy metal is attached to a ferromagnet, a vertically flowing heat-driven spin current is converted to a transverse electric voltage, which is known as the longitudinal spin Seebeck effect (SSE). If the ferromagnet is a metal, this voltage is also accompanied by voltages from two other sources, i.e., the anomalous Nernst effect in both the ferromagnet and the proximity-induced ferromagnetic boundary layer. By properly identifying and carefully separating those different effects, we find that in this pure spin current circuit the additional spin current drawn by the heavy metal generates another significant voltage by the ferromagnetic metal itself which should be present in all relevant experiments.

Description: We introduce a confocal shift-interferometer based on optical fibers. The presented spectroscopy allows measuring coherence maps of luminescent samples with a high spatial resolution even at cryogenic temperatures. We apply the spectroscopy onto electrostatically trapped, dipolar excitons in a semiconductor double quantum well. We find that the measured spatial coherence length of the excitonic emission coincides with the point spread function of the confocal setup. The results are consistent with a temporal coherence of the excitonic emission down to temperatures of 250 mK.

Description: We demonstrate enhanced hydrogen generation rates at high pH using colloidal cadmium sulphide nanorods decorated with Pt nanoparticles. We introduce a simplified procedure for the decoration and subsequent hydrogen generation, reducing both the number of working steps and the materials costs. Different Pt precursor concentrations were tested to reveal the optimal conditions for the efficient hydrogen evolution. A sharp increase in hydrogen evolution rates was measured at pH 13 and above, a condition at which the surface charge transfer was efficiently mediated by the formation of hydroxyl radicals and further consumption by the sacrificial triethanolamine hole scavenger.

Description: Spatial gaps between grains and other grains, substrates, or electrodes in organic electronic devices are one of the causes of the reduction in the electrical characteristics. In this study, we demonstrate that cold isostatic pressing (CIP) is an effective method to crush the gaps and enhance the electrical characteristics. CIP of metal-free phthalocyanine (H 2 PC) films induced a decrease in the film thickness by 34%–40% because of the gap crush. The connection of smaller grains into a larger grain and planarization of the film surface were also observed in the CIP film. The crystal axes of the H 2 PC crystallites were rearranged from the a-axis to the c-axis of the α-phase crystal structure in a direction perpendicular to the substrate by CIP, indicating favorable hole injection and transport in this direction because of a better overlap of π orbitals. Thermally stimulated current measurements showed that deep hole traps disappeared and the total hole-trap density decreased after CIP. These CIP-induced changes of the film thicknesses, crystal axes and the hole traps lead to a marked increase in the hole mobility of the H 2 PC films from 2.0 × 10 −7 to 4.0 × 10 −4 cm 2 /V s by 2000 times in the perpendicular direction. We believe that these findings are important for unveiling the underlying carrier injection and transport mechanisms of organic films and for enhancing the performance of future organic electronic devices.

Description: Anomalous Hall effect (AHE) based ferromagnetic resonance (FMR) measurements were carried out on perpendicularly magnetized Co/Pt multilayer single dots of 0.4–3  μ m in diameter. The resonance behavior was measured by detecting the decrease of perpendicular magnetization component due to magnetization precession. Resonance behavior was observed as a clear decrease of Hall voltages, and the obtained resonance fields were consistent with the results of vector-network-analyzer FMR. Spin-waves with cylindrical symmetry became significant by decreasing the dot diameter, and quantized multiple resonances were observed in the dot of 0.4 μm in diameter. The AHE based FMR proposed here is a powerful method to approach magnetization dynamics including spin waves and non-linear behavior excited in a finite nanostructure.

Description: To make relevant predictions about observable emission, hydrodynamical simulation codes must employ schemes that account for radiative losses, but the large dimensionality of accurate radiative transfer schemes is often prohibitive. Stamatellos and collaborators introduced a scheme for smoothed particle hydrodynamics (SPH) simulations based on the notion of polytropic pseudo-clouds that uses only local quantities to estimate cooling rates. The computational approach is extremely efficient and works well in cases close to spherical symmetry, such as in star formation problems. Unfortunately, the method, which takes the local gravitational potential as an input, can be inaccurate when applied to non-spherical configurations, limiting its usefulness when studying discs or stellar collisions, among other situations of interest. Here, we introduce the ‘pressure scale height method,’ which incorporates the fluid pressure scaleheight into the determination of column densities and cooling rates, and show that it produces more accurate results across a wide range of physical scenarios while retaining the computational efficiency of the original method. The tested models include spherical polytropes as well as discs with specified density and temperature profiles. We focus on applying our techniques within an SPH code, although our method can be implemented within any particle-based Lagrangian or grid-based Eulerian hydrodynamic scheme. Our new method may be applied in a broad range of situations, including within the realm of stellar interactions, collisions, and mergers.

Description: Three ideal point-based multi-criteria decision methods (MCDM), i.e., iterative ideal point thresholding (IIPT), compromise programming (CP) and a newly-proposed CP variant, called balanced compromise programming (BCP), were applied to the Tabacay catchment in Ecuador with the aim of finding a distribution of land use types (LUT) that optimizes regional land performance. This performance was expressed in terms of several conflicting on-site ecosystem services (ESS), namely water conservation, soil protection, carbon storage and monetary income. IIPT selects the best performing LUT on a per-land unit basis, that is the assignment of a LUT to a land unit is completely independent with respect to other land units. CP and BCP, on the other hand, aim at optimizing the integrated regional performance. These methods produce a LUT distribution that is as close as possible to the absolute optimal performance that would be achieved when conflict among ESS is not considered. In general, similar results were obtained with CP and BCP. This was not the case when the results produced by these two methods were contrasted with IIPT. For most ESS under consideration, CP and BCP produced balanced results that were closer to the absolute optimal values when compared to IIPT. We conclude from our results that, when optimization of land performance at a regional scale is at stake, CP-derived models emerge as the preferable option over IIPT, especially when balanced solutions are a requirement.

Description: Current understanding of aspen fire ecology in western North America includes the paradoxical characterization that aspen-dominated stands, although often regenerated following fire, are “fire-proof”. We tested this idea by predicting potential fire behavior across a gradient of aspen dominance in northern Utah using the Forest Vegetation Simulator and the Fire and Fuels Extension. The wind speeds necessary for crowning (crown-to-crown fire spread) and torching (surface to crown fire spread) were evaluated to test the hypothesis that predicted fire behavior is influenced by the proportion of aspen in the stand. Results showed a strong effect of species composition on crowning, but only under moderate fire weather, where aspen-dominated stands were unlikely to crown or torch. Although rarely observed in actual fires, conifer-dominated stands were likely to crown but not to torch, an example of “hysteresis” in crown fire behavior. Results support the hypothesis that potential crown fire behavior varies across a gradient of aspen dominance and fire weather, where it was likely under extreme and severe fire weather, and unlikely under moderate and high fire weather. Furthermore, the “fire-proof” nature of aspen stands broke down across the gradient of aspen dominance and fire weather.

Description: We introduce a method for generating rational extensions of time-dependent potentials, such that the associated Schrödinger equation admits solutions in terms of exceptional orthogonal polynomials. Our method is applicable to position-dependent Schrödinger equations, as well as to their conventional counterparts for constant mass.

Description: In this paper, we prove the existence of the Stark-Wannier quantum resonances for one-dimensional Schrödinger operators with smooth periodic potential and small external homogeneous electric field. Such a result extends the existence result previously obtained in the case of periodic potentials with a finite number of open gaps.

Description: We study four citrate synthase homodimeric proteins within a structure-based coarse-grained model. Two of these proteins come from thermophilic bacteria, one from a cryophilic bacterium and one from a mesophilic organism; three are in the closed and two in the open conformations. Even though the proteins belong to the same fold, the model distinguishes the properties of these proteins in a way which is consistent with experiments. For instance, the thermophilic proteins are more stable thermodynamically than their mesophilic and cryophilic homologues, which we observe both in the magnitude of thermal fluctuations near the native state and in the kinetics of thermal unfolding. The level of stability correlates with the average coordination number for amino acid contacts and with the degree of structural compactness. The pattern of positional fluctuations along the sequence in the closed conformation is different than in the open conformation, including within the active site. The modes of correlated and anticorrelated movements of pairs of amino acids forming the active site are very different in the open and closed conformations. Taken together, our results show that the precise location of amino acid contacts in the native structure appears to be a critical element in explaining the similarities and differences in the thermodynamic properties, local flexibility, and collective motions of the different forms of the enzyme.

Description: We give an algorithm which produces a unique element of the Clifford group on n qubits ( C n ) from an integer 0 ≤ i 〈 C n (the number of elements in the group). The algorithm involves O ( n 3 ) operations and provides, in addition to a canonical mapping from the integers to group elements g , a factorization of g into a sequence of at most 4 n symplectic transvections. The algorithm can be used to efficiently select random elements of C n which are often useful in quantum information theory and quantum computation. We also give an algorithm for the inverse map, indexing a group element in time O ( n 3 ).

Description: We present laboratory experimental results demonstrating that librational forcing of an ellipsoidal container of water can produce intense motions through the mechanism of a libration driven elliptical instability (LDEI). These libration studies are conducted using an ellipsoidal acrylic container filled with water. A particle image velocimetry method is used to measure the 2D velocity field in the equatorial plane over hundreds libration cycles for a fixed Ekman number, E = 2 × 10 −5 . In doing so, we recover the libration induced base flow and a time averaged zonal flow. Further, we show that LDEI in non-axisymmetric container geometries is capable of driving both intermittent and saturated turbulent motions in the bulk fluid. Additionally, we measure the growth rate and amplitude of the LDEI induced excited flow in a fully ellipsoidal container at more extreme parameters than previously studied [Noir et al. , “Experimental study of libration-driven flows in nonaxisymmetric containers,” Phys. Earth Planet. Inter. 204-205 , 1 (2012); Cébron et al. , Phys. Fluids 24 , 061703, “Libration driven elliptical instability,” (2012)]. Excitation of bulk filling turbulence by librational forcing provides a mechanism for transferring rotational energy into turbulent fluid motion and thus can play an important role in the thermal evolution, interior dynamics, and magneto-hydrodynamics of librating bodies, as appear to be common in solar system settings [e.g., Comstock and Bills, “A solar system survey of forced librations in longitude,” J. Geophys. Res. Planets 108 , 1 (2003)].

Description: We numerically study the displacement flow of two iso-viscous Newtonian fluids in an inclined two-dimensional channel, formed by two parallel plates. The results are complementary to our previous studies on displacement flows in pipes and channels. The heavier displacing fluid moves the lighter displaced fluid in the downward direction. Three dimensionless groups largely describe these flows: the densimetric Froude number ( Fr ), the Reynolds number ( Re ), and the duct inclination (β). As a first order approximation, we are able to classify different flow regimes phenomenologically in a two-dimensional ( Fr ; Re cosβ/ Fr )-plane and provide leading order expressions for the transitions between different regimes. The stabilizing and/or de-stabilizing effects of the imposed mean flow on buoyant exchange flows (zero imposed velocity) are described for a broad range of dimensionless parameters.

Description: Compressible granular materials are involved in many applications, some of them being related to energetic porous media. Gas permeation effects are important during their compaction stage, as well as their eventual chemical decomposition. Also, many situations involve porous media separated from pure fluids through two-phase interfaces. It is thus important to develop theoretical and numerical formulations to deal with granular materials in the presence of both two-phase interfaces and gas permeation effects. Similar topic was addressed for fluid mixtures and interfaces with the Discrete Equations Method (DEM) [R. Abgrall and R. Saurel, “Discrete equations for physical and numerical compressible multiphase mixtures,” J. Comput. Phys. 186 (2), 361-396 (2003)] but it seemed impossible to extend this approach to granular media as intergranular stress [K. K. Kuo, V. Yang, and B. B. Moore, “Intragranular stress, particle-wall friction and speed of sound in granular propellant beds,” J. Ballist. 4 (1), 697-730 (1980)] and associated configuration energy [J. B. Bdzil, R. Menikoff, S. F. Son, A. K. Kapila, and D. S. Stewart, “Two-phase modeling of deflagration-to-detonation transition in granular materials: A critical examination of modeling issues,” Phys. Fluids 11 , 378 (1999)] were present with significant effects. An approach to deal with fluid-porous media interfaces was derived in Saurel et al. [“Modelling dynamic and irreversible powder compaction,” J. Fluid Mech. 664 , 348-396 (2010)] but its validity was restricted to weak velocity disequilibrium only. Thanks to a deeper analysis, the DEM is successfully extended to granular media modelling in the present paper. It results in an enhanced version of the Baer and Nunziato [“A two-phase mixture theory for the deflagration-to-detonation transition (DDT) in reactive granular materials,” Int. J. Multiphase Flow 12 (6), 861-889 (1986)] model as symmetry of the formulation is now preserved. Several computational examples are shown to validate and illustrate method’s capabilities.

Description: We perform a theoretical and numerical study of the Coulomb-driven electroconvection flow of a dielectric liquid between two coaxial cylinders. The specific case, where the inner to outer diameter ratio is 0.5, is analyzed. A strong unipolar injection of ions either from the inner or outer cylinder is considered to introduce free charge carriers into the system. A finite volume method is used to solve all governing equations including Navier-Stokes equations and a simplified set of Maxwell’s equations. The flow is characterized by a subcritical bifurcation in the finite amplitude regime. A linear stability criterion and a nonlinear one that correspond to the onset and stop of the flow motion, respectively, are linked with a hysteresis loop. In addition, we also explore the behavior of the system for higher values of the stability parameter. For inner injection, we observe a transition between the patterns made of 7 and 8 cells, before an oscillatory regime is attained. Such a transition leads to a second finite amplitude stability criterion. A simple modal analysis reveals that the competition of different modes is at the origin of this behavior. The charge density, as well as velocity field distributions is provided to help understand the bifurcation behavior.

Description: We report on the production of metal ions of magnesium and zinc in the beam plasma formed by a forevacuum-pressure electron source. Magnesium and zinc vapor were generated by electron beam evaporation from a crucible and subsequently ionized by electron impact from the e-beam itself. Both gaseous and metallic plasmas were separately produced and characterized using a modified RGA-100 quadrupole mass-spectrometer. The fractional composition of metal isotopes in the plasma corresponds to their fractional natural abundance.

Description: To better understand the role of residual electrons in the repeatability of an atmospheric pressure plasma plume, the characteristics of a helium plasma jet from the 1st, 2nd,… until the repeatable discharge pulse are investigated for the first time. It's found that the longest plasma plume is achieved in the 1st discharge pulse. The length of the plasma plume becomes shorter and shorter and reaches a constant value in the 3rd discharge pulse and keeps the same for the following pulses. The dynamics of the 1st discharge pulse show that the plasma bullet appears random in nature. Two photomultiplier tubes are used to distinguish the two potential factors that could result in the stochastic dynamics of the plasma bullet, i.e., stochastic ignition of the plasma and the stochastic propagation velocity. The results show that the stochastic propagation velocity occurs only in the 1st and the 2nd discharge pulses, while the stochastic ignition of the plasma presents until the 100th pulse. The dynamics of the plasma propagation become repeatable after about 100 pulses. Detail analysis shows that the repeatability of plasma bullet is due to the residual electrons density. The residual electron density of 10 9  cm −3 or higher is needed for repeatable discharges mode.

Description: We present a full two-fluid magnetohydrodynamic (MHD) description for a completely ionized hydrogen plasma, retaining the effects of the Hall current, electron pressure, and electron inertia. According to this description, each plasma species introduces a new spatial scale: the ion inertial length λ i and the electron inertial length λ e , which are not present in the traditional MHD description. In the present paper, we seek for possible changes in the energy power spectrum in fully developed turbulent regimes, using numerical simulations of the two-fluid equations in two-and-a-half dimensions. We have been able to reproduce different scaling laws in different spectral ranges, as it has been observed in the solar wind for the magnetic energy spectrum. At the smallest wavenumbers where plain MHD is valid, we obtain an inertial range following a Kolmogorov k −5∕3 law. For intermediate wavenumbers such that λ i − 1 ≪ k ≪ λ e − 1 , the spectrum is modified to a k −7∕3 power-law, as has also been obtained for Hall-MHD neglecting electron inertia terms. When electron inertia is retained, a new spectral region given by k 〉 λ e − 1 arises. The power spectrum for magnetic energy in this region is given by a k −11∕3 power law. Finally, when the terms of electron inertia are retained, we study the self-consistent electric field. Our results are discussed and compared with those obtained in the solar wind observations and previous simulations.

Description: A novel mechanism of collisionless heating in large planar arrays of small inductive coils operated at radio frequencies is presented. In contrast to the well-known case of non-local heating related to the transversal conductivity, when the electrons move perpendicular to the planar coil, we investigate the problem of electrons moving in a plane parallel to the coils. Two types of periodic structures are studied. Resonance velocities where heating is efficient are calculated analytically by solving the Vlasov equation. Certain scaling parameters are identified. The concept is further investigated by a single particle simulation based on the ergodic principle and combined with a Monte Carlo code allowing for collisions with Argon atoms. Resonances, energy exchange, and distribution functions are obtained. The analytical results are confirmed by the numerical simulation. Pressure and electric field dependences are studied. Stochastic heating is found to be most efficient when the electron mean free path exceeds the size of a single coil cell. Then the mean energy increases approximately exponentially with the electric field amplitude.

Description: A pulsed slow-positron beam generated by an electron linear accelerator was directly used for positron annihilation lifetime spectroscopy without any positron storage devices. A waveform digitizer was introduced to simultaneously capture multiple gamma-ray signals originating from positron annihilation events during a single accelerator pulse. The positron pulse was chopped and bunched with the chopper signals also sent to the waveform digitizer. Time differences between the annihilation gamma-ray and chopper peaks were calculated and accumulated as lifetime spectra in a computer. The developed technique indicated that positron annihilation lifetime spectroscopy can be performed in a 20 μ s time window at a pulse repetition rate synchronous with the linear accelerator. Lifetime spectra of a Kapton sheet and a thermally grown SiO 2 layer on Si were successfully measured. Synchronization of positron lifetime measurements with pulsed ion irradiation was demonstrated by this technique.

Description: Surface nuclear magnetic resonance (surface-NMR) is a promising technique for exploring shallow subsurface aquifer structures. Surface-NMR can be applied in environments that are characterized as a 1-D layered Earth. The technique utilizes a single loop and is referred to as magnetic resonance sounding. The technique referred to as magnetic resonance tomography (MRT) allows complex 2-D aquifer structures to be explored. Currently, MRT requires multiple loops and a roll along measurement scheme, which causes long survey time. We propose a loop layout using an elongated transmitter and an in-loop receiver arrays (ETRA) to conduct a 2-D survey with just one measurement. We present a comprehensive comparison between the new layout and the common approaches based on sensitivity and resolution analyses and show synthetic and field data. The results show that ETRA generates subsurface images at sufficient resolution with significantly lower survey times than other loop layouts.

Description: Measurements of ground deformation can be used to identify and interpret geophysical processes occurring at volcanoes. Most studies rely on a single geodetic technique, or fit a geophysical model to the results of multiple geodetic techniques. Here we present a methodology that combines GPS, Total Station measurements and InSAR into a single reference frame to produce an integrated 3-D geodetic velocity surface without any prior geophysical assumptions. The methodology consists of five steps: design of the network, acquisition and processing of the data, spatial integration of the measurements, time series computation and finally the integration of spatial and temporal measurements. The most significant improvements of this method are (1) the reduction of the required field time, (2) the unambiguous detection of outliers, (3) an increased measurement accuracy and (4) the construction of a 3-D geodetic velocity field. We apply this methodology to ongoing motion on Arenal's western flank. Integration of multiple measurement techniques at Arenal volcano revealed a deformation field that is more complex than that described by individual geodetic techniques, yet remains consistent with previous studies. This approach can be applied to volcano monitoring worldwide and has the potential to be extended to incorporate other geodetic techniques and to study transient deformation.

Description: In this study we evaluate the capabilities of three satellite sensors for assessing water composition and bottom depth in Lake Garda, Italy. A consistent physics-based processing chain was applied to Moderate Resolution Imaging Spectroradiometer (MODIS), Landsat-8 Operational Land Imager (OLI) and RapidEye. Images gathered on 10 June 2014 were corrected for the atmospheric effects with the 6SV code. The computed remote sensing reflectance (Rrs) from MODIS and OLI were converted into water quality parameters by adopting a spectral inversion procedure based on a bio-optical model calibrated with optical properties of the lake. The same spectral inversion procedure was applied to RapidEye and to OLI data to map bottom depth. In situ measurements of Rrs and of concentrations of water quality parameters collected in five locations were used to evaluate the models. The bottom depth maps from OLI and RapidEye showed similar gradients up to 7 m (r = 0.72). The results indicate that: (1) the spatial and radiometric resolutions of OLI enabled mapping water constituents and bottom properties; (2) MODIS was appropriate for assessing water quality in the pelagic areas at a coarser spatial resolution; and (3) RapidEye had the capability to retrieve bottom depth at high spatial resolution. Future work should evaluate the performance of the three sensors in different bio-optical conditions.

Description: From a holistic view, this paper addresses a perspective of coordinated development of economy, society, and environment for regional sustainability assessment. Firstly, a comprehensive indicator system for co-evaluating the level of economic, social, and environmental subsystems is presented based on a holistic understanding of regional sustainability. Then, a coordinated development index model focusing on the level of coordination among the subsystems as well as their comprehensive development level is established. Furthermore, an empirical study of all the provinces and municipalities is conducted by collecting the panel data from 2004 to 2010. The result shows that: (1) the coordinated developments of the most developed and the most underdeveloped regions stay stable while the regions with medium development level possess more fluctuant trends during the study years; (2) regional disparities are indicated according to the grading of CDI (the coordinated development index), which are further analyzed to be related to the local economic development patterns; (3) the conditions and causes of economic, social, and environmental development in real situations under different grades of CDI are discussed through detailed case studies of typical regions, which indicate specific suggestions of sustainable development for regions in the same pattern.

Description: As the largest solid waste (SW) generator in the world, China is facing serious pollution issues induced by increasing quantities of SW. The sustainability assessment of SW management is very important for designing relevant policy for further improving the overall efficiency of solid waste management (SWM). By focusing on industrial solid waste (ISW) and municipal solid waste (MSW), the paper investigated the sustainability performance of SWM by applying decoupling analysis, and further identified the main drivers of SW change in China by adopting Logarithmic Mean Divisia Index (LMDI) model. The results indicate that China has made a great achievement in SWM which was specifically expressed as the increase of ISW utilized amount and harmless disposal ratio of MSW, decrease of industrial solid waste discharged (ISWD), and absolute decoupling of ISWD from economic growth as well. However, China has a long way to go to achieve the goal of sustainable management of SW. The weak decoupling, even expansive negative decoupling of ISW generation and MSW disposal suggests that China needs timely technology innovation and rational institutional arrangement to reduce SW intensity from the source and promote classification and recycling. The factors of investment efficiency and technology are the main determinants of the decrease in SW, inversely, economic growth has increased SW discharge. The effects of investment intensity showed a volatile trend over time but eventually decreased SW discharged. Moreover, the factors of population and industrial structure slightly increased SW.

Description: This paper aims to construct conservation laws for a Benjamin–Bona–Mahony equation with variable coefficients, which is a third-order partial differential equation. This equation does not have a Lagrangian and so we transform it to a fourth-order partial differential equation, which has a Lagrangian. The Noether approach is then employed to construct the conservation laws. It so happens that the derived conserved quantities fail to satisfy the divergence criterion and so one needs to make adjustments to the derived conserved quantities in order to satisfy the divergence condition. The conservation laws are then expressed in the original variable. Finally, a conservation law is used to obtain exact solution of a special case of the Benjamin–Bona–Mahony equation.

Description: The sensorimotor system (SMS) plays an important role in sports and in every day movement. Several tools for assessment and training have been designed. Many of them are directed to specific populations, and have major shortcomings due to the training effect or safety. The aim of the present study was to design and assess a dynamic sensorimotor test and training device that can be adjusted for all levels of performance. The novel pneumatic-driven mechatronic device can guide the trainee, allow independent movements or disrupt the individual with unpredicted perturbations while standing on a platform. The test-reliability was evaluated using intraclass correlation coefficient (ICC). Subjects were required to balance their center of pressure (COP) in a target circle (TITC). The time in TITC and the COP error (COPe) were recorded for analysis. The results of 22 males and 14 females (23.7 ± 2.6 years) showed good to excellent test–retest reliability. The newly designed Active Balance System (ABS) was then compared with the Biodex Balance System SD® (BBS). The results of 15 females, 14 males (23.4 ± 1.6 years) showed modest correlation in static and acceptable correlation in dynamic conditions, suggesting that ABS could be a reliable and comparable tool for dynamic balance assessments.

Description: Climate change will increase the frequency and magnitude of extreme weather events and create risks that will impact health care facilities. Health care facilities will need to assess climate change risks and adopt adaptive management strategies to be resilient, but guidance tools are lacking. In this study, a toolkit was developed for health care facility officials to assess the resiliency of their facility to climate change impacts. A mixed methods approach was used to develop climate change resiliency indicators to inform the development of the toolkit. The toolkit consists of a checklist for officials who work in areas of emergency management, facilities management and health care services and supply chain management, a facilitator’s guide for administering the checklist, and a resource guidebook to inform adaptation. Six health care facilities representing three provinces in Canada piloted the checklist. Senior level officials with expertise in the aforementioned areas were invited to review the checklist, provide feedback during qualitative interviews and review the final toolkit at a stakeholder workshop. The toolkit helps health care facility officials identify gaps in climate change preparedness, direct allocation of adaptation resources and inform strategic planning to increase resiliency to climate change.

Description: The World Health Organization defines social determinants of health as “complex, integrated, and overlapping social structures and economic systems” that are responsible for most health inequities. Similar to the individual-level risk factors such as behavioral and biological risk factors that influence disease, we consider social determinants of health such as the distribution of income, wealth, influence and power as risk factors for risk of disease. We operationally define health inequity in a disease within a population due to a risk factor that is unfair and avoidable as the difference between the disease outcome with and without the risk factor in the population. We derive expressions for difference in health inequity between two populations due to a risk factor that is unfair and avoidable for a given disease. The difference in heath inequity between two population groups due to a risk factor increases with increasing difference in relative risks and the difference in prevalence of the risk factor in the two populations. The difference in health inequity could be larger than the difference in health outcomes between the two populations in some situations. Compared to health disparities which are typically measured and monitored using absolute or relative disparities of health outcomes, the methods presented in this manuscript provide a different, yet complementary, picture because they parse out the contributions of unfair and avoidable risk factors.

Description: Structured metal surfaces could support spoof surface plasmon polaritons (SPPs), the dispersion of which is determined by the cutoff condition of guided modes in the nanostructures. We show that we can achieve split spoof SPPs by breaking the degeneracy of guided helical modes in concentric nanostructures via the classic analogue of the Zeeman effect. This split effect is shown to be observable from the spectra of enhanced electromagnetic transmission. Spin-sensitive enhanced electromagnetic transmission and the associated characteristics of field are investigated. Transmission branches versus parallel wavevector can be satisfactorily fitted by using the dispersion of spoof SPPs.

Description: Light-induced degradation (LID) is a deleterious effect in crystalline silicon, which is considered to originate from recombination-active boron-oxygen complexes and/or copper-related defects. Although LID in both cases appears as a fast initial decay followed by a second slower degradation, we show that the time constant of copper-related degradation increases with increasing boron concentration in contrast to boron-oxygen LID. Temperature-dependent analysis reveals that the defect formation is limited by copper diffusion. Finally, interface defect density measurements confirm that copper-related LID is dominated by recombination in the wafer bulk.

Description: In this paper, we report the existence of intervalence charge transfer (IVCT) luminescence in Yb-doped fluorite-type crystals associated with Yb 2+ –Yb 3+ mixed valence pairs. By means of embedded cluster, wave function theory ab initio calculations, we show that the widely studied, very broad band, anomalous emission of Yb 2+ -doped CaF 2 and SrF 2 , usually associated with impurity-trapped excitons, is, rather, an IVCT luminescence associated with Yb 2+ –Yb 3+ mixed valence pairs. The IVCT luminescence is very efficiently excited by a two-photon upconversion mechanism where each photon provokes the same strong 4 f 14 –1 A 1g → 4 f 13 ( 2 F 7/2 )5 de g –1 T 1u absorption in the Yb 2+ part of the pair: the first one, from the pair ground state; the second one, from an excited state of the pair whose Yb 3+ moiety is in the higher 4 f 13 ( 2 F 5/2 ) multiplet. The Yb 2+ –Yb 3+ → Yb 3+ –Yb 2+ IVCT emission consists of an Yb 2+ 5 de g → Yb 3+ 4 f 7/2 charge transfer accompanied by a 4 f 7/2 → 4 f 5/2 deexcitation within the Yb 2+ 4 f 13 subshell: [ 2 F 5/2 5 de g , 2 F 7/2 ] → [ 2 F 7/2 ,4 f 14 ]. The IVCT vertical transition leaves the oxidized and reduced moieties of the pair after electron transfer very far from their equilibrium structures; this explains the unexpectedly large band width of the emission band and its low peak energy, because the large reorganization energies are subtracted from the normal emission. The IVCT energy diagrams resulting from the quantum mechanical calculations explain the different luminescent properties of Yb-doped CaF 2 , SrF 2 , BaF 2 , and SrCl 2 : the presence of IVCT luminescence in Yb-doped CaF 2 and SrF 2 ; its coexistence with regular 5 d -4 f emission in SrF 2 ; its absence in BaF 2 and SrCl 2 ; the quenching of all emissions in BaF 2 ; and the presence of additional 5 d –4 f emissions in SrCl 2 which are absent in SrF 2 . They also allow to interpret and reproduce recent experiments on transient photoluminescence enhancement in Yb 2+ -doped CaF 2 and SrF 2 , the appearance of Yb 2+ 4 f –5 d absorption bands in the excitation spectra of the IR Yb 3+ emission in partly reduced CaF 2 :Yb 3+ samples, and to identify the broadband observed in the excitation spectrum of the so far called anomalous emission of SrF 2 :Yb 2+ as an IVCT absorption, which corresponds to an Yb 2+ 4 f 5/2 → Yb 3+ 4 f 7/2 electron transfer.

Description: A classical limit of quantum dynamics can be defined by compensation of the quantum potential in the time-dependent Schrödinger equation. The quantum potential is a non-local quantity, defined in the trajectory-based form of the Schrödinger equation, due to Madelung, de Broglie, and Bohm, which formally generates the quantum-mechanical features in dynamics. Selective inclusion of the quantum potential for the degrees of freedom deemed “quantum,” defines a hybrid quantum/classical dynamics, appropriate for molecular systems comprised of light and heavy nuclei. The wavefunction is associated with all of the nuclei, and the Ehrenfest, or mean-field, averaging of the force acting on the classical degrees of freedom, typical of the mixed quantum/classical methods, is avoided. The hybrid approach is used to examine evolution of light/heavy systems in the harmonic and double-well potentials, using conventional grid-based and approximate quantum-trajectory time propagation. The approximate quantum force is defined on spatial domains, which removes unphysical coupling of the wavefunction fragments corresponding to distinct classical channels or configurations. The quantum potential, associated with the quantum particle, generates forces acting on both quantum and classical particles to describe the backreaction.

Description: In the present work, we redefine and generalize the action principle for dissipative systems proposed by Riewe by fixing the mathematical inconsistencies present in the original approach. In order to formulate a quadratic Lagrangian for non-conservative systems, the Lagrangian functions proposed depend on mixed integer order and fractional order derivatives. As examples, we formulate a quadratic Lagrangian for a particle under a frictional force proportional to the velocity and to the classical problem of an accelerated point charge.

Description: We consider a very natural generalization of quantum theory by letting the dimension of the Bloch ball be not necessarily three. We analyze bipartite state spaces where each of the components has a d -dimensional Euclidean ball as state space. In addition to this, we impose two very natural assumptions: the continuity and reversibility of dynamics and the possibility of characterizing bipartite states by local measurements. We classify all these bipartite state spaces and prove that, except for the quantum two-qubit state space, none of them contains entangled states. Equivalently, in any of these non-quantum theories, interacting dynamics is impossible. This result reveals that “existence of entanglement” is the requirement with minimal logical content which singles out quantum theory from our family of theories.

Description: A covariant algorithm for deriving the conserved quantities for natural Hamiltonian systems is combined with the non-relativistic framework of Eisenhart, and of Duval, in which the classical trajectories arise as geodesics in a higher dimensional space-time, realized by Brinkmann manifolds. Conserved quantities which are polynomial in the momenta can be built using time-dependent conformal Killing tensors with flux. The latter are associated with terms proportional to the Hamiltonian in the lower dimensional theory and with spectrum generating algebras for higher dimensional quantities of order 1 and 2 in the momenta. Illustrations of the general theory include the Runge-Lenz vector for planetary motion with a time-dependent gravitational constant G ( t ), motion in a time-dependent electromagnetic field of a certain form, quantum dots, the Hénon-Heiles and Holt systems, respectively, providing us with Killing tensors of rank that ranges from one to six.

Description: In this research, structural-functional integrated cement-based materials were prepared by employing cement paste and a microencapsulated phase change material (MPCM) manufactured using urea-formaldehyde resin as the shell and paraffin as the core material. The encapsulation ratio of the MPCM could reach up to 91.21 wt%. Thermal energy storage cement pastes (TESCPs) incorporated with different MPCM contents (5%, 10%, 15%, 20% and 25% by weight of cement) were developed, and their thermal and mechanical properties were studied. The results showed that the total energy storage capacity of the hardened cement specimens with MPCM increased by up to 3.9-times compared with that of the control cement paste. The thermal conductivity at different temperature levels (35–36 °C, 55–56 °C and 72–74 °C) decreased with the increase of MPCM content, and the decrease was the highest when the temperature level was 55–56 °C. Moreover, the compressive strength, flexural strength and density of hardened cement paste decreased with the increase in MPCM content linearly. Among the evaluated properties, the compressive strength of TESCPs had a larger and faster degradation with the increase of MPCM content.

Description: We demonstrate both theoretically and experimentally that the microwave-shielding effectiveness of a double-layer metallic mesh with a submillimeter period can be improved by increasing the separation between the two mesh layers (without affecting transmittance). This double-layer mesh consists of two layers of square aluminum mesh separated by a quartz-glass substrate. By increasing the substrate's optical thickness from zero to λ / 4   of the shielding band's upper frequency, the shielding of the double-layer mesh improves considerably, owing to the increased reflectivity of the double-layer mesh with increasing separation in the low-frequency band. A Ku-band shielding effectiveness of over 32 dB is observed for the double-layer mesh with a normalized visible transmittance greater than 91%. It is found that the electromagnetic shielding effectiveness is enhanced by over 7 dB (80.0% energy attenuation) across the Ku-band, compared with that of a single-layer mesh, while the optical transmittances are almost identical for both tested structures. Such an enhancement permits the design of high-transparency optical elements with stronger microwave shielding that can be achieved using single-layer metallic mesh.

Description: This letter performed polarized microscopic laser Raman scattering spectroscopy on the curved edges of transferred epitaxial graphene on SiO 2 /Si. The intensity ratio between the parallel and perpendicular polarized D band is evolved, providing a spectroscopy-based technique to probe the atomic-scale edge structures in graphene. A detailed analysis procedure for non-ideal disordered curved edges of graphene is developed combining the atomic-scale zigzag and armchair edge structures along with some point defects. These results could provide valuable information of the realistic edges of graphene at the atomic-scale that can strongly influence the performance of graphene-based nanodevices.

Description: We measure and quantify properties of galactic outflows and diffuse gas at z ≥ 1 in cosmological hydrodynamical simulations. Our novel subresolution model, Multi-Phase Particle Integrator (MUPPI), implements supernova feedback using fully local gas properties, where the wind velocity and mass loading are not given as input. We find the following trends at z  = 2 by analysing central galaxies having a stellar mass higher than 10 9 M . The outflow velocity and mass outflow rate ( $\dot{M}_{\rm out}$ ) exhibit positive correlations with galaxy mass and with the star formation rate (SFR). However, most of the relations present a large scatter. The outflow mass loading factor () is between 0.2 and 10. The comparison effective model generates a constant outflow velocity, and a negative correlation of with halo mass. The number fraction of galaxies where outflow is detected decreases at lower redshifts, but remains more than 80 per cent over z  = 1–5. The outflow velocity correlation with SFR becomes flatter at z  = 1, and displays a negative correlation with halo mass in massive galaxies. Our study demonstrates that both the MUPPI and effective models produce significant outflows at ~1/10 of the virial radius; at the same time shows that the properties of outflows generated can be different from the input speed and mass loading in the effective model. Our MUPPI model, using local properties of gas in the subresolution recipe, is able to develop galactic outflows whose properties correlate with global galaxy properties , and consistent with observations.

Description: In this paper, we explore the effects of electrostatic parametric amplification on a high quality factor (Q 〉 100 000) encapsulated disk resonator gyroscope (DRG), fabricated in 〈100〉 silicon. The DRG was operated in the n = 2 degenerate wineglass mode at 235 kHz, and electrostatically tuned so that the frequency split between the two degenerate modes was less than 100 mHz. A parametric pump at twice the resonant frequency is applied to the sense axis of the DRG, resulting in a maximum scale factor of 156.6  μ V/(°/s), an 8.8× improvement over the non-amplified performance. When operated with a parametric gain of 5.4, a minimum angle random walk of 0.034°/√h and bias instability of 1.15°/h are achieved, representing an improvement by a factor of 4.3× and 1.5×, respectively.

Description: We propose a control element for a Josephson spin valve. It is a complex Josephson device containing ferromagnetic (F) layer in the weak-link area consisting of two regions, representing 0 and π Josephson junctions, respectively. The valve's state is defined by mutual orientations of the F-layer magnetization vector and boundary line between 0 and π sections of the device. We consider possible implementation of the control element by introduction of a thin normal metal layer in a part of the device area. By means of theoretical simulations, we study properties of the valve's structure as well as its operation, revealing such advantages as simplicity of control, high characteristic frequency, and good legibility of the basic states.

Description: Thin films of the lead-free ferroelectric Na 0.5 Bi 0.5 TiO 3 grown on thin-film Pt electrodes supported by SrTiO 3 substrates have a complex microstructure consisting of crystalline grains with three distinct major crystallographic orientations. The piezoelectric response measured in spatially separated sub-micron grains using time-resolved synchrotron x-ray microdiffraction is highly inhomogeneous even among grains sharing the same major orientation. The piezoelectric coefficient d 33 varies by nearly a factor of two in a series of areas sharing the 〈001〉 orientation. The piezoelectric inhomogeneity is linked to the peculiar microstructure of the film, arising from local variations in the stress imposed by surrounding grains with different crystallographic orientations and differing directions of the ferroelectric remnant polarization. A systematic nonlinearity of the piezoelectric strain is observed in applied electric fields with small magnitudes in all regions, consistent with the coexistence of domains of differing polarization direction at zero applied electric field.

Description: The advent in high-throughput-sequencing (HTS) technologies has revolutionized conventional biodiversity research by enabling parallel capture of DNA sequences possessing species-level diagnosis. However, polymerase chain reaction (PCR)-based implementation is biased by the efficiency of primer binding across lineages of organisms. A PCR-free HTS approach will alleviate this artefact and significantly improve upon the multi-locus method utilizing full mitogenomes. Here we developed a novel multiplex sequencing and assembly pipeline allowing for simultaneous acquisition of full mitogenomes from pooled animals without DNA enrichment or amplification. By concatenating assemblies from three de novo assemblers, we obtained high-quality mitogenomes for all 49 pooled taxa, with 36 species 〉15 kb and the remaining 〉10 kb, including 20 complete mitogenomes and nearly all protein coding genes (99.6%). The assembly quality was carefully validated with Sanger sequences, reference genomes and conservativeness of protein coding genes across taxa. The new method was effective even for closely related taxa, e.g. three Drosophila spp., demonstrating its broad utility for biodiversity research and mito-phylogenomics. Finally, the in silico simulation showed that by recruiting multiple mito-loci, taxon detection was improved at a fixed sequencing depth. Combined, these results demonstrate the plausibility of a multi-locus mito-metagenomics approach as the next phase of the current single-locus metabarcoding method.

Description: The efficacy and the mutation spectrum of genome editing methods can vary substantially depending on the targeted sequence. A simple, quick assay to accurately characterize and quantify the induced mutations is therefore needed. Here we present TIDE, a method for this purpose that requires only a pair of PCR reactions and two standard capillary sequencing runs. The sequence traces are then analyzed by a specially developed decomposition algorithm that identifies the major induced mutations in the projected editing site and accurately determines their frequency in a cell population. This method is cost-effective and quick, and it provides much more detailed information than current enzyme-based assays. An interactive web tool for automated decomposition of the sequence traces is available. TIDE greatly facilitates the testing and rational design of genome editing strategies.

Description: NMR chemical shift predictions based on empirical methods are nowadays indispensable tools during resonance assignment and 3D structure calculation of proteins. However, owing to the very limited statistical data basis, such methods are still in their infancy in the field of nucleic acids, especially when non-canonical structures and nucleic acid complexes are considered. Here, we present an ab initio approach for predicting proton chemical shifts of arbitrary nucleic acid structures based on state-of-the-art fragment-based quantum chemical calculations. We tested our prediction method on a diverse set of nucleic acid structures including double-stranded DNA, hairpins, DNA/protein complexes and chemically-modified DNA. Overall, our quantum chemical calculations yield highly/very accurate predictions with mean absolute deviations of 0.3–0.6 ppm and correlation coefficients ( r 2 ) usually above 0.9. This will allow for identifying misassignments and validating 3D structures. Furthermore, our calculations reveal that chemical shifts of protons involved in hydrogen bonding are predicted significantly less accurately. This is in part caused by insufficient inclusion of solvation effects. However, it also points toward shortcomings of current force fields used for structure determination of nucleic acids. Our quantum chemical calculations could therefore provide input for force field optimization.

Description: Bicyclic oxazaphospholidine monomers were used to prepare a series of phosphorothioate (PS)-modified gapmer antisense oligonucleotides (ASOs) with control of the chirality of each of the PS linkages within the 10-base gap. The stereoselectivity was determined to be 98% for each coupling. The objective of this work was to study how PS chirality influences biophysical and biological properties of the ASO including binding affinity ( T m ), nuclease stability, activity in vitro and in vivo , RNase H activation and cleavage patterns (both human and E. coli ) in a gapmer context. Compounds that had nine or more Sp-linkages in the gap were found to be poorly active in vitro , while compounds with uniform Rp-gaps exhibited activity very similar to that of the stereo-random parent ASOs. Conversely, when tested in vivo , the full Rp-gap compound was found to be quickly metabolized resulting in low activity. A total of 31 ASOs were prepared with control of the PS chirally of each linkage within the gap in an attempt to identify favorable Rp/Sp positions. We conclude that a mix of Rp and Sp is required to achieve a balance between good activity and nuclease stability.

Description: In an isogenic cell population, phenotypic heterogeneity among individual cells is common and critical for survival of the population under different environment conditions. DNA modification is an important epigenetic factor that can regulate phenotypic heterogeneity. The single molecule real-time (SMRT) sequencing technology provides a unique platform for detecting a wide range of DNA modifications, including N6-methyladenine (6-mA), N4-methylcytosine (4-mC) and 5-methylcytosine (5-mC). Here we present qDNAmod, a novel bioinformatic tool for genome-wide quantitative profiling of intercellular heterogeneity of DNA modification from SMRT sequencing data. It is capable of estimating proportion of isogenic haploid cells, in which the same loci of the genome are differentially modified. We tested the reliability of qDNAmod with the SMRT sequencing data of Streptococcus pneumoniae strain ST556. qDNAmod detected extensive intercellular heterogeneity of DNA methylation (6-mA) in a clonal population of ST556. Subsequent biochemical analyses revealed that the recognition sequences of two type I restriction–modification (R-M) systems are responsible for the intercellular heterogeneity of DNA methylation initially identified by qDNAmod. qDNAmod thus represents a valuable tool for studying intercellular phenotypic heterogeneity from genome-wide DNA modification.

Description: Combinatorial transcription factor (TF) binding is essential for cell-type-specific gene regulation. However, much remains to be learned about the mechanisms of TF interactions, including to what extent constrained spacing and orientation of interacting TFs are critical for regulatory element activity. To examine the relative prevalence of the ‘enhanceosome’ versus the ‘TF collective’ model of combinatorial TF binding, a comprehensive analysis of TF binding site sequences in large scale datasets is necessary. We developed a motif-pair discovery pipeline to identify motif co-occurrences with preferential distance(s) between motifs in TF-bound regions. Utilizing a compendium of 289 mouse haematopoietic TF ChIP-seq datasets, we demonstrate that haematopoietic-related motif-pairs commonly occur with highly conserved constrained spacing and orientation between motifs. Furthermore, motif clustering revealed specific associations for both heterotypic and homotypic motif-pairs with particular haematopoietic cell types. We also showed that disrupting the spacing between motif-pairs significantly affects transcriptional activity in a well-known motif-pair—E-box and GATA, and in two previously unknown motif-pairs with constrained spacing—Ets and Homeobox as well as Ets and E-box. In this study, we provide evidence for widespread sequence-specific TF pair interaction with DNA that conforms to the ‘enhanceosome’ model, and furthermore identify associations between specific haematopoietic cell-types and motif-pairs.

Description: In silico tools have been developed to predict variants that may have an impact on pre-mRNA splicing. The major limitation of the application of these tools to basic research and clinical practice is the difficulty in interpreting the output. Most tools only predict potential splice sites given a DNA sequence without measuring splicing signal changes caused by a variant. Another limitation is the lack of large-scale evaluation studies of these tools. We compared eight in silico tools on 2959 single nucleotide variants within splicing consensus regions (scSNVs) using receiver operating characteristic analysis. The Position Weight Matrix model and MaxEntScan outperformed other methods. Two ensemble learning methods, adaptive boosting and random forests, were used to construct models that take advantage of individual methods. Both models further improved prediction, with outputs of directly interpretable prediction scores. We applied our ensemble scores to scSNVs from the Catalogue of Somatic Mutations in Cancer database. Analysis showed that predicted splice-altering scSNVs are enriched in recurrent scSNVs and known cancer genes. We pre-computed our ensemble scores for all potential scSNVs across the human genome, providing a whole genome level resource for identifying splice-altering scSNVs discovered from large-scale sequencing studies.

Description: In mammals, RNA interference is primarily a post-transcriptional mechanism. Evidence has accumulated for additional role in transcriptional gene silencing (TGS) but the question for a good paradigm for small interfering antigene RNA (agRNA)-induced chromatin modification remains unanswered. Here, we show that SETDB1, a histone H3-lysine 9 (H3K9)-specific methyltransferase, cooperates with Argonaute-2 (AGO2) and plays an essential role in agRNA-induced TGS. The androgen receptor ( AR ) gene was transcriptionally silenced by agRNA targeted to its promoter, and we show that this repression was mitigated by knockdown of SETDB1 or AGO2 . Chromatin immunoprecipitation demonstrated that agRNA-driven AGO2 was first targeted to the AR promoter, followed by SETDB1. SIN3A and HDAC1/2, the components of the SIN3-HDAC complex, immunoprecipitated with SETDB1, and localized at the agRNA-targeted promoter. Agreeing with the presence of SETDB1, trimethyl-H3K9 was enriched in the AR promoter. Both EZH2 and trimethyl-H3K27 were also present in the targeted locus; accordingly, EZH2 immunoprecipitated with SETDB1. DNA methylation level was not significantly changed, suggesting the absence of de novo methylating activity in agRNA-induced AR promoter. Our results demonstrate that SETDB1, together with AGO2, plays an essential role in TGS through recruiting chromatin remodeler and/or other modifiers, consequently creating a repressive chromatin milieu at the targeted promoter.

Description: LEF/TCFs direct the final step in Wnt/β-catenin signalling by recruiting β-catenin to genes for activation of transcription. Ancient, non-vertebrate TCFs contain two DNA binding domains, a High Mobility Group box for recognition of the Wnt Response Element (WRE; 5'-CTTTGWWS-3') and the C-clamp domain for recognition of the GC-rich Helper motif (5'-RCCGCC-3'). Two vertebrate TCFs (TCF-1/TCF7 and TCF-4/TCF7L2) use the C-clamp as an alternatively spliced domain to regulate cell-cycle progression, but how the C-clamp influences TCF binding and activity genome-wide is not known. Here, we used a doxycycline inducible system with ChIP-seq to assess how the C-clamp influences human TCF1 binding genome-wide. Metabolic pulse-labeling of nascent RNA with 4'Thiouridine was used with RNA-seq to connect binding to the Wnt transcriptome. We find that the C-clamp enables targeting to a greater number of gene loci for stronger occupancy and transcription regulation. The C-clamp uses Helper sites concurrently with WREs for gene targeting, but it also targets TCF1 to sites that do not have readily identifiable canonical WREs. The coupled ChIP-seq/4'Thiouridine-seq analysis identified new Wnt target genes, including additional regulators of cell proliferation. Thus, C-clamp containing isoforms of TCFs are potent transcriptional regulators with an expanded transcriptome directed by C-clamp-Helper site interactions.

Description: Chromatin modifiers and histone modifications are components of a chromatin-signaling network involved in transcription and its regulation. The interactions between chromatin modifiers and histone modifications are often unknown, are based on the analysis of few genes or are studied in vitro . Here, we apply computational methods to recover interactions between chromatin modifiers and histone modifications from genome-wide ChIP-Seq data. These interactions provide a high-confidence backbone of the chromatin-signaling network. Many recovered interactions have literature support; others provide hypotheses about yet unknown interactions. We experimentally verified two of these predicted interactions, leading to a link between H4K20me1 and members of the Polycomb Repressive Complexes 1 and 2. Our results suggest that our computationally derived interactions are likely to lead to novel biological insights required to establish the connectivity of the chromatin-signaling network involved in transcription and its regulation.

Description: As the biomedical impact of small RNAs grows, so does the need to understand competing structural alternatives for regions of functional interest. Suboptimal structure analysis provides significantly more RNA base pairing information than a single minimum free energy prediction. Yet computational enhancements like Boltzmann sampling have not been fully adopted by experimentalists since identifying meaningful patterns in this data can be challenging. Profiling is a novel approach to mining RNA suboptimal structure data which makes the power of ensemble-based analysis accessible in a stable and reliable way. Balancing abstraction and specificity, profiling identifies significant combinations of base pairs which dominate low-energy RNA secondary structures. By design, critical similarities and differences are highlighted, yielding crucial information for molecular biologists. The code is freely available via http://gtfold.sourceforge.net/profiling.html .

Description: The stress-sensitive restriction-modification (RM) system CglI from Corynebacterium glutamicum and the homologous NgoAVII RM system from Neisseria gonorrhoeae FA1090 are composed of three genes: a DNA methyltransferase (M.CglI and M.NgoAVII), a putative restriction endonuclease (R.CglI and R.NgoAVII, or R-proteins) and a predicted DEAD-family helicase/ATPase (N.CglI and N.NgoAVII or N-proteins). Here we report a biochemical characterization of the R- and N-proteins. Size-exclusion chromatography and SAXS experiments reveal that the isolated R.CglI, R.NgoAVII and N.CglI proteins form homodimers, while N.NgoAVII is a monomer in solution. Moreover, the R.CglI and N.CglI proteins assemble in a complex with R 2 N 2 stoichiometry. Next, we show that N-proteins have ATPase activity that is dependent on double-stranded DNA and is stimulated by the R-proteins. Functional ATPase activity and extensive ATP hydrolysis (~170 ATP/s/monomer) are required for site-specific DNA cleavage by R-proteins. We show that ATP-dependent DNA cleavage by R-proteins occurs at fixed positions (6–7 nucleotides) downstream of the asymmetric recognition sequence 5'-GCCGC-3'. Despite similarities to both Type I and II restriction endonucleases, the CglI and NgoAVII enzymes may employ a unique catalytic mechanism for DNA cleavage.

Description: Emerging evidence points to roles for tRNA modifications and tRNA abundance in cellular stress responses. While isolated instances of stress-induced tRNA degradation have been reported, we sought to assess the effects of stress on tRNA levels at a systems level. To this end, we developed a next-generation sequencing method that exploits the paucity of ribonucleoside modifications at the 3'-end of tRNAs to quantify changes in all cellular tRNA molecules. Application of this tRNA-seq method to Saccharomyces cerevisiae identified all 76 expressed unique tRNA species out of 295 coded in the yeast genome, including all isoacceptor variants, with highly precise relative (fold-change) quantification of tRNAs. In studies of stress-induced changes in tRNA levels, we found that oxidation (H 2 O 2 ) and alkylation (methylmethane sulfonate, MMS) stresses induced nearly identical patterns of up- and down-regulation for 58 tRNAs. However, 18 tRNAs showed opposing changes for the stresses, which parallels our observation of signature reprogramming of tRNA modifications caused by H 2 O 2 and MMS. Further, stress-induced degradation was limited to only a small proportion of a few tRNA species. With tRNA-seq applicable to any organism, these results suggest that translational control of stress response involves a contribution from tRNA abundance.

Description: During meiosis programmed DNA double-strand breaks (DSBs) are repaired by homologous recombination using the sister chromatid or the homologous chromosome (homolog) as a template. This repair results in crossover (CO) and non-crossover (NCO) recombinants. Only CO formation between homologs provides the physical linkages guiding correct chromosome segregation, which are essential to produce healthy gametes. The factors that determine the CO/NCO decision are still poorly understood. Using Schizosaccharomyces pombe as a model we show that the Rad51/Dmc1-paralog complexes Rad55-Rad57 and Rdl1-Rlp1-Sws1 together with Swi5-Sfr1 play a major role in antagonizing both the FANCM-family DNA helicase/translocase Fml1 and the RecQ-type DNA helicase Rqh1 to limit hybrid DNA formation and promote Mus81-Eme1-dependent COs. A common attribute of these protein complexes is an ability to stabilize the Rad51/Dmc1 nucleoprotein filament, and we propose that it is this property that imposes constraints on which enzymes gain access to the recombination intermediate, thereby controlling the manner in which it is processed and resolved.

Description: To study target sequence specificity, selectivity, and reaction kinetics of Streptococcus pyogenes Cas9 activity, we challenged libraries of random variant targets with purified Cas9::guide RNA complexes in vitro . Cleavage kinetics were nonlinear, with a burst of initial activity followed by slower sustained cleavage. Consistent with other recent analyses of Cas9 sequence specificity, we observe considerable (albeit incomplete) impairment of cleavage for targets mutated in the PAM sequence or in ‘seed’ sequences matching the proximal 8 bp of the guide. A second target region requiring close homology was located at the other end of the guide::target duplex (positions 13–18 relative to the PAM). Sequences flanking the guide+PAM region had measurable (albeit modest) effects on cleavage. In addition, the first-base Guanine constraint commonly imposed by gRNA expression systems has little effect on overall cleavage efficiency. Taken together, these studies provide an in vitro understanding of the complexities of Cas9–gRNA interaction and cleavage beyond the general paradigm of site determination based on the ‘seed’ sequence and PAM.

Description: Transcripts possessing a 5'-triphosphate are a hallmark of viral transcription and can trigger the host antiviral response. 5'-triphosphates are also found on common host transcripts transcribed by RNA polymerase III (RNAP III), yet how these transcripts remain non-immunostimulatory is incompletely understood. Most microRNAs (miRNAs) are 5'-monophosphorylated as a result of sequential endonucleolytic processing by Drosha and Dicer from longer RNA polymerase II (RNAP II)-transcribed primary transcripts. In contrast, bovine leukemia virus (BLV) expresses subgenomic RNAP III transcripts that give rise to miRNAs independent of Drosha processing. Here, we demonstrate that each BLV pre-miRNA is directly transcribed by RNAP III from individual, compact RNAP III type II genes. Thus, similar to manmade RNAP III-generated short hairpin RNAs (shRNAs), the BLV pre-miRNAs are initially 5'-triphosphorylated. Nonetheless, the derivative 5p miRNAs and shRNA-generated 5p small RNAs (sRNAs) possess a 5'-monophosphate. Our enzymatic characterization and small RNA sequencing data demonstrate that BLV 5p miRNAs are co-terminal with 5'-triphosphorylated miRNA precursors (pre-miRNAs). Thus, these results identify a 5'-tri-phosphatase activity that is involved in the biogenesis of BLV miRNAs and shRNA-generated sRNAs. This work advances our understanding of retroviral miRNA and shRNA biogenesis and may have implications regarding the immunostimulatory capacity of RNAP III transcripts.

Description: Within the field of synthetic biology, a rational design of genetic parts should include a causal understanding of their input-output responses—the so-called transfer function—and how to tune them. However, a commonly adopted strategy is to fit data to Hill-shaped curves without considering the underlying molecular mechanisms. Here we provide a novel mathematical formalization that allows prediction of the global behavior of a synthetic device by considering the actual information from the involved biological parts. This is achieved by adopting an enzymology-like framework, where transfer functions are described in terms of their input affinity constant and maximal response. As a proof of concept, we characterize a set of Lux homoserine-lactone-inducible genetic devices with different levels of Lux receptor and signal molecule. Our model fits the experimental results and predicts the impact of the receptor's ribosome-binding site strength, as a tunable parameter that affects gene expression. The evolutionary implications are outlined.

Description: The restriction endonuclease (REase) NgoAVII is composed of two proteins, R.NgoAVII and N.NgoAVII, and shares features of both Type II restriction enzymes and Type I/III ATP-dependent restriction enzymes (see accompanying paper Zaremba et al. , 2014). Here we present crystal structures of the R.NgoAVII apo-protein and the R.NgoAVII C-terminal domain bound to a specific DNA. R.NgoAVII is composed of two domains: an N-terminal nucleolytic PLD domain; and a C-terminal B3-like DNA-binding domain identified previously in BfiI and EcoRII REases, and in plant transcription factors. Structural comparison of the B3-like domains of R.NgoAVII, EcoRII, BfiI and the plant transcription factors revealed a conserved DNA-binding surface comprised of N- and C-arms that together grip the DNA. The C-arms of R.NgoAVII, EcoRII, BfiI and plant B3 domains are similar in size, but the R.NgoAVII N-arm which makes the majority of the contacts to the target site is much longer. The overall structures of R.NgoAVII and BfiI are similar; however, whilst BfiI has stand-alone catalytic activity, R.NgoAVII requires an auxiliary cognate N.NgoAVII protein and ATP hydrolysis in order to cleave DNA at the target site. The structures we present will help formulate future experiments to explore the molecular mechanisms of intersubunit crosstalk that control DNA cleavage by R.NgoAVII and related endonucleases.

Description: Distinct translational initiation mechanisms between prokaryotes and eukaryotes limit the exploitation of prokaryotic riboswitch repertoire for regulatory RNA circuit construction in mammalian application. Here, we explored programmed ribosomal frameshifting (PRF) as the regulatory gene expression platform for engineered ligand-responsive RNA devices in higher eukaryotes. Regulation was enabled by designed ligand-dependent conformational rearrangements of the two cis-acting RNA motifs of opposite activity in -1 PRF. Particularly, RNA elements responsive to trans-acting ligands can be tailored to modify co-translational RNA refolding dynamics of a hairpin upstream of frameshifting site to achieve reversible and adjustable -1 PRF attenuating activity. Combined with a ligand-responsive stimulator, synthetic RNA devices for synergetic translational-elongation control of gene expression can be constructed. Due to the similarity between co-transcriptional RNA hairpin folding and co-translational RNA hairpin refolding, the RNA-responsive ligand repertoire provided in prokaryotic systems thus becomes accessible to gene-regulatory circuit construction for synthetic biology application in mammalian cells.

Description: Cutaneous photosensitization is a common side effect of drug treatment and can be associated with an increased skin cancer risk. The immunosuppressant azathioprine, the fluoroquinolone antibiotics and vemurafenib—a BRAF inhibitor used to treat metastatic melanoma—are all recognized clinical photosensitizers. We have compared the effects of UVA radiation on cultured human cells treated with 6-thioguanine (6-TG, a DNA-embedded azathioprine surrogate), the fluoroquinolones ciprofloxacin and ofloxacin and vemurafenib. Despite widely different structures and modes of action, each of these drugs potentiated UVA cytotoxicity. UVA photoactivation of 6-TG, ciprofloxacin and ofloxacin was associated with the generation of singlet oxygen that caused extensive protein oxidation. In particular, these treatments were associated with damage to DNA repair proteins that reduced the efficiency of nucleotide excision repair. Although vemurafenib was also highly phototoxic to cultured cells, its effects were less dependent on singlet oxygen. Highly toxic combinations of vemurafenib and UVA caused little protein carbonylation but were nevertheless inhibitory to nucleotide excision repair. Thus, for three different classes of drugs, photosensitization by at least two distinct mechanisms is associated with reduced protection against potentially mutagenic and carcinogenic DNA damage.