ALBERT

Description: 5-aminolevulinic acid (ALA), a key precursor in the biosynthesis of porphyrins, can improve plant tolerance to various environmental stresses. However, it is unclear whether ALA can improve tolerance in poplar. Here, we investigated the effects of ALA on poplars under drought and salt stresses. ALA pretreatment exhibited less morphological damage, reduced leaf malonaldehyde content (MDA) and electrolyte leakage (EL), and increased leaf relative water content (RWC), proline (PRO), superoxide dismutase (SOD), and peroxidase (POD) content under stresses. Furthermore, exogenous ALA mitigated the decrease in photosynthetic capacity, and restored the chlorophyll content (Chl), net CO2 assimilation rate, stomatal conductance (Gs), transpiration rate (Tr), maximal photochemical quantum yield of PSII (Fv/Fm), actual quantum yield of photosynthesis (YII), and electron transfer rate (ETR) of poplar under various stresses. qRT-PCR showed that ALA up-regulated the expression of antiporters and aquaporins genes, which are associated with Na+ exclusion in the leaf cells and the transport activity of aquaporins. In summary, ALA pretreatment significantly improved the stress tolerance of poplar, decreasing the degree of membrane lipid peroxidation and promoting the photosynthesis and antioxidant capacity of leaves. In addition, our results showed that ALA might mediate Na+ transporter and aquaporins activity, thereby increasing the salt tolerance of poplar.

Description: A previous study revealed low survival rates for Japanese larch (Larix kaempferi) summer-planted seedlings grown in Hiko-V-120 containers. This study examines nursery practices that could potentially prevent deterioration of the seedling water balance after planting to improve the survival rate of this species, which has a low drought tolerance. During summer planting, we tested (1) drought hardening or high-potassium fertilization for two months before planting, (2) antitranspirant or topping treatment at planting, and (3) the use of the JFA-150 container with a larger capacity and lower growing density than the Hiko-V-120 container. Drought hardening increased seedling drought tolerance because of the low leaf:root ratio, due to lower leaf mass production, resulting in increased survival from 74% to 93% in Hiko-V-120 containers. When JFA-150 containers were used, the leaf:root ratio was lower because of higher root mass, resulting in an increase in survival to 87%, with the highest survival of 97% when combined with drought hardening. The application of antitranspirant increased survival to over 90%, whereas topping did not, probably because of severer competition from weeds. High-potassium fertilization did not affect seedling traits or survival. For better survival of summer-planted container-grown Japanese larch seedlings, it is recommended that they be grown in containers providing sufficient cell volume and density for root growth while the seedlings are in the nursery and that irrigation be withheld for two months before planting. In addition, to obtain higher survival, an antitranspirant can be applied at planting at a cost.

Description: Many factors govern the flow of deposited nitrogen (N) through forest ecosystems and into stream water. At the Fernow Experimental Forest in WV, stream water nitrate (NO3−) export from a long-term reference watershed (WS 4) increased in approximately 1980 and has remained elevated despite more recent reductions in chronic N deposition. Long-term changes in species composition may have altered forest N demand and the retention of deposited N. In particular, the abundance and importance value of Acer saccharum have increased since the 1950s, and this species is thought to have a low affinity for NO3−. We measured the relative uptake of NO3− and ammonium (NH4+) by six important temperate broadleaf tree species and estimated stand uptake of total N, NO3−, and NH4+. We then used records of stream water NO3− and stand composition to evaluate the potential impact of changes in species composition on NO3− export. Surprisingly, the tree species we examined all used both mineral N forms approximately equally. Overall, the total N taken up by the stand into aboveground tissues increased from 1959 through 2001 (30.9 to 35.2 kg N ha−1 yr−1). However, changes in species composition may have altered the net supply of NO3− in the soil since A. saccharum is associated with high nitrification rates. Increases in A. saccharum importance value could result in an increase of 3.9 kg NO3−-N ha−1 yr−1 produced via nitrification. Thus, shifting forest species composition resulted in partially offsetting changes in NO3− supply and demand, with a small net increase of 1.2 kg N ha−1 yr−1 in NO3− available for leaching. Given the persistence of high stream water NO3− export and relatively abrupt (~9 year) change in stream water NO3− concentration circa 1980, patterns of NO3− export appear to be driven by long-term deposition with a lag in the recovery of stream water NO3− after more recent declines in atmospheric N input.

Description: The introduction of new species in forest management must be undertaken with a degree of care, to help prevent the spread of invasive species. However, new species with higher profitability are needed to increase forest products value and the resilience of rural populations. Paulownia tomentosa has an extremely fast growth. The objective and novelty of this work was to study the potential use of young Paulownia trees grown in Portugal by using heat treatment to improve its properties, thereby allowing higher value applications of the wood. The average chemical composition of untreated and heat-treated wood was determined. The extractive content was determined by successive Soxhlet extraction with dichloromethane (DCM), ethanol and water as solvents. The composition of lipophilic extracts was performed by injection in GC-MS with mass detection. Insoluble and soluble lignin, holocellulose and α-cellulose were also determined. Physical (density and water absorption and dimensional stability) and mechanical properties (bending strength and bending stiffness) and termite resistance was also determined. Results showed that extractive content increased in all solvents, lignin and α-cellulose also increased and hemicelluloses decreased. Compounds derived from the thermal degradation of lignin were found in heat-treated wood extractions. Dimensional stability improved but there was a decrease in mechanical properties. Resistance against termites was better for untreated wood than for heat-treated wood, possibly due to the thermal degradation of some toxic extractives.

Description: Molecular genetic techniques (FISH, RT-PCR, and metagenomic analysis) were used to investigate the comparative functional biodiversity in the prokaryotic complex in grassland and forests’ sod-podzol under polycyclic aromatic hydrocarbon influence. The polluted samples showed a decrease in the biomass of the prokaryotic community representatives and a change in the metabolically active dominants–representatives of the Bacteria and Archaea domains compared to the control samples. The suppression of the metabolic activity of prokaryote cells under the influence of PAHs in sod-podzolic soil under meadow vegetation was more pronounced compared to soils under forest vegetation. The representatives of prokaryotes that are sensitive and resistant to the studied PAHs were identified. The representatives of the phylogenetic groups from the bacterial complex resistant to PAH pollution were Proteobacteria (Alphaproteobacteria), Bacteroidetes, Firmicutes, Chloroflexi, and Thaumarhaeota in the archaeal complex. Representatives of the phylum Acidobacteria and Actinobacteria (Streptosporangiales) are noted among those sensitive to PAH contamination. The presence and expression of the functional alkane monooxygenase (alkB) gene were established in all the experimental variants studied. In the plant variants, the number of copies of alkB genes increased by an order of magnitude and the biomass of metabolically active prokaryotic representatives with the functional alkB gene doubled compared to the unpolluted territories. The copy number index of the alkB gene can be used as one of the parameters when characterizing an ecosystem for the presence of PAH pollutants.

Description: It is important to understand price premiums related to certified raw wood to predict the future of forest certifications from the perspective of forestry enterprises. We focused on identifying the trading roundwood market data in the economic center of power in Tokyo. This study aimed to clarify Tama-certified raw wood prices under the local area certification scheme, forest-certified raw wood prices, and the handling volumes at the Tama Roundwood Market Center in Tokyo. Sales details of the Tama Roundwood Market Center were used to identify the handling volumes, Tama-certified raw wood prices, and FSC (Forest Stewardship Council) or SGEC (Japan-specific Sustainable Green Ecosystem Council)-certified raw wood prices. The FSC and SGEC have operated from the center since 2016. Data were collected from the 2006–2018 fiscal years. Our results showed that the volume of raw wood handled increased due to the regeneration-cutting project conducted by the Tokyo Metropolitan Government. On the other hand, there was no price premium for Tama-certified raw wood under the local certification scheme or for FSC- or SGEC-certified raw wood. Price premiums for forest certifications are necessary for ongoing sustainable forest management. There is a need to increase consumer awareness of forest certifications and to differentiate quality certifications further, and these would likely create price premiums.

Description: Laser scanning via LiDAR is a powerful technique for collecting data necessary for Digital Terrain Model (DTM) generation, even in densely forested areas. LiDAR observations located at the ground level can be separated from the initial point cloud and used as input for the generation of a Digital Terrain Model (DTM) via interpolation. This paper proposes a quantitative analysis of the accuracy of DTMs (and derived slope maps) obtained from LiDAR data and is focused on conditions common to most forestry activities (rough, steep terrain with forest cover). Three interpolation algorithms were tested: Inverse Distance Weighted (IDW), Natural Neighbour (NN) and Thin-Plate Spline (TPS). Research was mainly focused on the issue of point data density. To analyze its impact on the quality of ground surface modelling, the density of the filtered data set was artificially lowered (from 0.89 to 0.09 points/m2) by randomly removing point observations in 10% increments. This provides a comprehensive method of evaluating the impact of LiDAR ground point density on DTM accuracy. While the reduction of point density leads to a less accurate DTM in all cases (as expected), the exact pattern varies by algorithm. The accuracy of the LiDAR-derived DTMs is relatively good even when LiDAR sampling density is reduced to 0.40–0.50 points/m2 (50–60 % of the initial point density), as long as a suitable interpolation algorithm is used (as IDW proved to be less resilient to density reductions below approximately 0.60 points/m2). In the case of slope estimation, the pattern is relatively similar, except the difference in accuracy between IDW and the other two algorithms is even more pronounced than in the case of DTM accuracy. Based on this research, we conclude that LiDAR is an adequate method for collecting morphological data necessary for modelling the ground surface, even when the sampling density is significantly reduced.

Description: Emerald ash borer (EAB), (Agrilus planipennis Fairmaire), first identified in 2002 in southeast Michigan, has caused catastrophic ash (Fraxinus spp.) mortality in forests within the core of the invasion and has spread to 35 states and five Canadian provinces. Little is known about persistence and densities of EAB populations in post-invasion sites after most ash trees have died. We monitored EAB populations from 2014 to 2016 using double decker (DD) traps set in the midst of white ash (F. americana) trees in 30 post-invasion sites in southeast and south-central Michigan. Two DD traps were deployed at each site. One trap had a dark green upper prism and light purple lower prism, both baited with cis-3-hexenol lures. The other had two dark purple prisms baited with cis-3-hexenol on the upper prism and Manuka oil on the lower prism. In 2014 and 2016, size and condition of ash trees were recorded and area of live white ash phloem was estimated in an 18-m-radius plot centered around each of the DD traps. Area of live white ash phloem per site ranged from approximately 24 to 421 m2 in 2014 and from 24 to 411 m2 in 2016. Canopy condition of live white ash trees generally improved; 65% and 89% of the trees had healthy canopies (

Description: Control of seed germination and dormancy is important in seed plant adaptation and evolution. When studying seed dormancy of Quercus species, we observed a substantially delayed shoot emergence following a fast root emergence in Quercus chungii F.P.Metcalf. Since epicotyl physiological dormancy (PD) has not been reported in Quercus section Cyclobalanopsis, we examined seed morphology and germination in Q. chungii and aimed to document epicotyl PD in the seeds. The embryo was fully developed in fresh ripe seeds. The elongating cotyledonary petiole pushed the embryo axis out of the seed during germination, which differed from observations in other Quercus species. Shoots emerged from seeds with developing roots after 3 months of warm stratification (35/25 °C), reaching the highest percentage of shoot emergence in seeds after 5 months. Seeds were recalcitrant and displayed a yet unreported epicotyl PD type, for which we propose the formula Cnd(root) ‒ Cp’’ 2b(shoot). Early emergence and development of the root system in Q. chungii seeds with epicotyl PD appears to be a mechanism to maintain a constant water supply to the shoot during plumule development and emergence. Our documentation of seed germination will provide guidance for the conservation and restoration of this species from seeds.

Description: Abstract Cellulose utilization at its full potential often requires its dissolution which is challenging. Aqueous NaOH is the solvent of choice due to the rapid, non-toxic, low cost and environmentally friendly dissolution process. However, there are several limitations, such as the required low temperature and cellulose´s moderately low degree of polymerization and concentration. Moreover, there is a tendency for gelation of semidilute solutions with time and temperature. The addition of ZnO aids cellulose dissolution and hinders self-aggregation in the NaOH solution; however, the exact role of ZnO has remained as an open question. In this work, we studied cellulose dissolution in the aqueous NaOH–ZnO system as well as the reactivity of the dissolved cellulose by oxidation with 4-AcNH-TEMPO+ (TEMPO+). Based on Raman spectroscopic studies and the TEMPO+-reactivities, we propose a new structure for cellulose dissolved in aqueous NaOH–ZnO. Graphic abstract

Description: The rheological properties of wood–plastic composites (WPCs) with different wood fiber contents were investigated using a rotational rheometer under low shear rates. The flow field information was analyzed and simulated by Ansys Polyflow software. The results showed that the WPCs with different wood fiber contents behaved as typical power-law fluids. A higher wood fiber content increased the shear thinning ability and pseudoplasticity of the WPCs. The pressure, velocity, shear rate, and viscosity distributions of the WPC during extrusion could be predicted by computational fluid dynamics (CFD) Ansys Polyflow software to explore the effects of different components on the flow field of WPCs.

Description: The public-good nature of benefits of fuel management explains its current undersupply and the consequent wildfire blow. Policies to promote fuel management are thus required. To be cost-effective, they need to be informed by context-specific estimates of forest owners’ willingness-to-accept (WTA) for managing fuel. This study develops a choice-modeling approach to this problem. A survey of forest owners was undertaken in a wildfire-prone parish in Portugal. Respondents were asked about their willingness to subscribe different management contracts. A choice model was estimated and used to predict owners’ WTA for different fuel management commitments, and the marginal cost of reducing burned area in the parish. Estimated WTA amounts depend on owner type and commitment. Active owners demanded lower amounts for adopting silvicultural intervention commitments, and higher for those implying income foregone. The marginal cost of reducing burned area through fuel management increases with area, but it currently is yet smaller than the corresponding marginal benefit. Our results suggest that zero burned area is not an option and optimum fuel management lies beyond the current level. It will be shifted even beyond by targeted (key-spot) fuel management approaches; WTA differences across owners can be used to design context-specific policies that are more cost-effective.

Description: In this present study, we have successfully fabricated the cellulose fabric with excellent electrical conductivity by depositing the graphene oxide grafted with the modified ferroferric oxide (GOF) upon fabric substrate via layer-by-layer magnetic-field-induced self-assembly apporoach and followed by chemical reduction. The results indicated that the morphologies of graphene oxide nanosheets for three-layer deposited fabrics could form the highly oriented wrinkled structures, which resulted from the synergistic interactions of magnetic induction force on magnetic doublet, hydrogen bonds and van der Waals. The volume resistivity of the three-layer deposited fabric could reach to 64.8 Ω cm compared with that of pure RGO-coated viscose fabrics (137.94 Ω cm) in the previous work, which could be favorable for improving the electrical conductivity and decreasing the graphene oxide consumption. Furthermore, the three-layer deposited fabric possessed excellent washing durability even after twelve times water laundering. Our results suggested that the flexible GOF-coated fabric had great potential in conductive devices for wearable electronics, strain sensors, smart actuators and bioelectrodes and so on.

Description: This paper reports new hierarchical cementitious composites developed using microcrystalline cellulose (MCC), sisal fibers and cetyltrimethylammonium bromide (CTAB) as the dispersing agent. MCC was dispersed in water without and with CTAB at different concentrations using ultrasonication and the optimum CTAB concentration for achieving homogeneous and stable MCC suspensions was found to be 40%. Hierarchical composites were fabricated using MCC (0.1–1.5 wt% of cement), sisal fibers (20 mm, 0.25% and 0.50 wt% of cement), 40% CTAB and tri-butyl phosphate as the defoaming agent. Mechanical strengths of composites improved significantly at 0.1 wt% MCC, which along with 0.5% sisal fibers improved compressive and flexural strengths by ~ 24% and ~ 18%, respectively. The hybrid reinforcement exhibited a synergistic effect on the fracture behavior of composites improving the fracture energy up to 40%. Hierarchical composites also showed improved fiber-matrix bonding, lower porosity and water absorption, superior hydration, carbonation resistance and durability up to 90 ageing cycles.

Description: Analysis and risk assessment are procedures which help to improve knowledge and are very important in practice. Risk assessment is possible to conduct only on the basis of exact accurate and tested information about the given system, which truly defines the given system within the spatial–temporal context. High standards of maintenance and treatment are closely linked with the requirements for quality and reliability forestry machinery and technological equipment. These standards are closely related to the maintenance of the equipment. This manuscript is focused on the reliability of standard forest machines used in the Slovak forestry. They are relatively modern and useful in the process of transporting and handling trees. This research showed the possibility of decreasing the production costs related to the maintenance of the devices and how to increase the final profit. The results of the research showed that the analysis of reliability is significant regarding to the quality of performed maintenance and the costs paid for it.

Description: Pine forests—as natural stands and artificial plantations—are one of the most extended and common forest types in the world [...]

Description: Globally, forests provide several functions and services to support humans’ well-being and the mitigation of greenhouse gases (GHGs). The services that forests provide enable the forest-dependent people and communities to meet their livelihood needs and well-being. Nevertheless, the world’s forests face a twin environmental problem of deforestation and forest degradation (D&FD), resulting in ubiquitous depletion of forest biodiversity and ecosystem services and eventual loss of forest cover. Ghana, like any tropical forest developing country, is not immune to these human-caused D&FD. This paper reviews Ghana’s D&FD driven by a plethora of pressures, despite many forest policies and interventions to ensure sustainable management and forest use. The review is important as Ghana is experiencing an annual D&FD rate of 2%, equivalent to 135,000 hectares loss of forest cover. Although some studies have focused on the causes of D&FD on Ghana’ forests, they failed to show the chain of causal links of drivers that cause D&FD. This review fills the knowledge and practice gap by adopting the Driver-Pressures-State-Impacts-Responses (DPSIR) analytical framework to analyse the literature-based sources of causes D&FD in Ghana. Specifically, the analysis identified agriculture expansion, cocoa farming expansion, illegal logging, illegal mining, population growth and policy failures and lapses as the key drivers of Ghana’s D&FD. The study uses the DPSIR analytical framework to show the chain of causal links that lead to the country’s D&FD and highlights the numerous interventions required to reverse and halt the ubiquitous perpetual trend of D&FD in Ghana. Similar tropical forest countries experiencing D&FD will find the review most useful to curtail the menace.

Description: The research presented herein explores soil organic carbon concentration (SOCC) under monodominant primeval forests of European beech trees and their association with parent material on a regional scale. Soil sampling to a maximum depth of 0.8 m was conducted in six localities in the West, East, and South Carpathians, Eastern Albanides, and Central Apennines, situated on different parent materials. Samples were analysed for SOCC by the dry combustion method. The average SOCC values representing individual localities ranged from 12.5 g kg−1 to 154.8 g kg−1 with a 99.7% coefficient of variation. SOCC association with climatic variables and forest stand volume data available from the literature were assessed by a Pearson correlation coefficient. Differences in SOCC among localities caused by site conditions were treated as a fixed factor in Welch’s ANOVA and found to be significant (p 〈 0.05) in the majority of cases. The associations between SOCC and climatic variables or stand volume were nonsignificant or perturbed. Since they validly explained less than 10% of the overall SOCC variance, the results of multiple comparison tests were assessed and interpreted in view of distinct parent materials.

Description: Natural regeneration of sessile oak forests is a complex process whose final outcome is influenced by numerous factors. The initial phase of development of sessile oak seedlings stands out as the most critical period in the process of natural regeneration of sessile oak forests. As the available light and competition from the accompanying woody species and ground vegetation are some of the main predictors of the success of sessile oak forest regeneration, this paper presents the results of studying the influence of these factors on the regeneration dynamics and development of sessile oak seedlings. The research was conducted in sessile oak forests in northeastern Serbia in the period from 2015 to 2020. At the end of the growing season each year, the following data were collected on 180 smaller sampling plots of 1 m2 in different conditions of canopy openness: the number, height, and root collar diameter of sessile oak seedlings. Also, the percent cover of competing woody species and ground vegetation was estimated on these sample plots. The obtained results indicated that the success of sessile oak forest regeneration largely depends on the initial number of sessile oak seedlings and silvicultural treatments during the rejuvenation period, which determine the microclimatic conditions in the stand and control the competing vegetation. They also indicate that with an increase in the available light, the impact of the competing vegetation on the dynamics of regeneration and development of sessile oak seedlings is less pronounced. Accordingly, as young sessile oak seedlings need a large amount of light for survival and development, it is necessary to increase the available amount of light intensively in a short period of time (six–eight years) by reducing canopy openness and thus providing optimal conditions in which sessile oak seedlings can gain an advantage over the competing vegetation.

Description: Bark beetles are a natural part of coniferous forests. Dendroctonus mexicanus Hopkins is the most widely distributed and most destructive bark beetle in Mexico, colonizing more than 21 pine species. The objectives of this study were to generate ecological niche models for D. mexicanus and three of its most important host species, to evaluate the overlap of climate suitability of the association Dendroctonus–Pinus, and to determine the possible expansion of the bark beetle. We used meticulously cleaned species occurrence records, 15 bioclimatic variables and ‘kuenm’, an R package that uses Maxent as a modeling algorithm. The Dendroctonus–Pinus ecological niches were compared using ordination methods and the kernel density function. We generated 1392 candidate models; not all were statistically significant (α = 0.05). The response type was quadratic; there is a positive correlation between suitability and precipitation, and negative with temperature, the latter determining climatic suitability of the studied species. Indeed, a single variable (Bio 1) contributed 93.9% to the model (Pinus leiophylla Schl. & Cham). The overlap of suitable areas for Dendroctonus–Pinus is 74.95% (P. leiophylla) and on average of 46.66% in ecological niches. It is observed that D. mexicanus begins to expand towards climates not currently occupied by the studied pine species.

Description: In four study plots located in silver fir and Scots pine stands in Magura National Park (southeastern Poland), the relationships between the occurrence and biomass of epigeic carabids, the volume of deadwood and soil biochemical properties were investigated. Thirteen carabid beetle species from the genera Abax, Carabus, Molops and Pterostichus were captured. Rare epigeic carabid species in the fauna of Poland and Europe, such as Carabus glabratus (Paykull), Carabus sylvestris (Panzer) and Abax schueppeli (Germar), were recorded. The number of carabid individuals and species captured as well as the mean individual biomass index at different elevations and in forests of different tree compositions differed significantly. There were no correlations between deadwood volume, carabid abundance and the mean individual biomass of the carabid beetles. The mean individual Carabidae biomass increased with elevated pH, soil carbon content, soil dehydrogenase activity and the number of stumps.

Description: Urban forest ecosystems are being developed to provide various environmental services (e.g., the preservation of urban trees) to urban inhabitants. However, some trees are deteriorated asymptomatically without exhibiting an early sign of tree displacement, which results in a higher vulnerability under dynamic wind loads, especially during typhoon seasons, in the subtropical and tropical regions. As such, it is important to understand the tilt and sway behaviors of trees to cope up with the probability of tree failure and to improve the efficacy of tree management. Tree behaviors under wind loads have been broadly reviewed in the past literature, yet thorough discussions on the measurement methods for tree displacement and its analysis of broadleaf specimens are lacking. To understand the behavioral pattern of both broadleaf and conifer species, this paper presents a detailed review of sway behavior analysis from the perspectives of the aerial parts of the individual tree, including tree stem, canopy, and trunk, alongside a highlighted focus on the root–plate movement amid the soil-root system. The analytical approaches associated with the time-space domain and the time-frequency domain are being introduced. In addition to the review of dynamic tree behaviors, an integrated tree monitoring framework based on geographic information systems (GIS) to detect and visualize the extent of tree displacement using smart sensing technology (SST) is introduced. The monitoring system aims to establish an early warning indicator system for monitoring the displacement angles of trees over the territory of Hong Kong’s urban landscape. This pilot study highlights the importance of the monitoring system at an operational scale to be applicable in the urban areas showcasing the practical use of the Internet of Things (IoT) with an in-depth understanding of the wind-load effect toward the urban trees in the tropical and subtropical cities.

Description: The prevalence of black bear (Ursus americanus) bark stripping in commercial redwood (Sequoia sempervirens (D. Don) Endl.) timber stands has been increasing in recent years. This stripping is a threat to commercial timber production because of the deleterious effects on redwood tree fitness. This study sought to unveil a remote sensing method to detect these damaged trees early and map their spatial patterns. By developing a timely monitoring method, forest timber companies can manipulate their timber harvesting routines to adapt to the consequences of the problem. We explored the utility of high spatial resolution UAV-collected hyperspectral imagery as a means for early detection of individual trees stripped by black bears. A hyperspectral sensor was used to capture ultra-high spatial and spectral information pertaining to redwood trees with no damage, those that have been recently attacked by bears, and those with old bear damage. This spectral information was assessed using the Jeffries-Matusita (JM) distance to determine regions along the electromagnetic spectrum that are useful for discerning these three-health classes. While we were able to distinguish healthy trees from trees with old damage, we were unable to distinguish healthy trees from recently damaged trees due to the inherent characteristics of redwood tree growth and the subtle spectral changes within individual tree crowns for the time period assessed. The results, however, showed that with further assessment, a time window may be identified that informs damage before trees completely lose value.

Description: Climate change leads to a variety of extreme weather conditions such as heat waves, unusual cold weather, and heavy rain, which always ends up with serious disasters. It could have a tremendous impact on a lot of industries in the world. The tourist industry, that plays a vital role in the global economy, has faced serious impacts from climate change in many tourist attractions, e.g., national parks, mountain areas, and beaches. The travel behavior of visitors has been changed under various climate change conditions. To understand the influence degrees of tourists on climate change factors, this study aimed to analyze whether there is difference in the influence of climate change on socio-demographic background, travel activities, travel intention, and the revisit intention attitude of tourists with different degrees of place attachment to Wuling National Forest Recreation Area. This study further investigated whether the climate change adaptation strategies offered by the park manager would have a positive influence on travel intention of tourists. The results of this study showed that except for heat waves, events related to climate change such as stronger typhoon, heavy rain, unusual cold weather condition, mud sliding, forest fire, and the appearance of mosquitos would have a negative influence on travel intention, especially for the tourists with a low degree of place attachment. In addition, if the park manager offers strategies to adapt to climate change conditions, these strategies would have a positive influence on travel intention.

Description: Information about tree biomass is important not only in the assessment of wood resources but also in the process of preparing forest management plans, as well as for estimating carbon stocks and their flow in forest ecosystems. The study aimed to develop empirical models for determining the dry mass of the aboveground parts of black locust trees and their components (stem, branches, and leaves). The research was carried out based on data collected in 13 stands (a total of 38 sample trees) of black locust located in western Poland. The model system was developed based on multivariate mixed-effect models using two approaches. In the first approach, biomass components and tree height were defined as dependent variables, while diameter at breast height was used as an independent variable. In the second approach, biomass components and diameter at breast height were dependent variables and tree height was defined as the independent variable. Both approaches enable the fixed-effect and cross-model random-effect prediction of aboveground dry biomass components of black locust. Cross-model random-effect prediction was obtained using additional measurements of two extreme trees, defined as trees characterized by the smallest and largest diameter at breast height in sample plot. This type of prediction is more precise (root mean square error for stem dry biomass for both approaches equals 77.603 and 188.139, respectively) than that of fixed-effects prediction (root mean square error for stem dry biomass for both approaches equals 238.716 and 206.933, respectively). The use of height as an independent variable increases the possibility of the practical application of the proposed solutions using remote data sources.

Description: The genus Quercus (oak), family Fagaceae, comprises around 500 species, being one of the most important and dominant woody angiosperms in the Northern Hemisphere. Nowadays, it is threatened by environmental cues, which are either of biotic or abiotic origin. This causes tree decline, dieback, and deforestation, which can worsen in a climate change scenario. In the 21st century, biotechnology should take a pivotal role in facing this problem and proposing sustainable management and conservation strategies for forests. As a non-domesticated, long-lived species, the only plausible approach for tree breeding is exploiting the natural diversity present in this species and the selection of elite, more resilient genotypes, based on molecular markers. In this direction, it is important to investigate the molecular mechanisms of the tolerance or resistance to stresses, and the identification of genes, gene products, and metabolites related to this phenotype. This research is being performed by using classical biochemistry or the most recent omics (genomics, epigenomics, transcriptomics, proteomics, and metabolomics) approaches, which should be integrated with other physiological and morphological techniques in the Systems Biology direction. This review is focused on the current state-of-the-art of such approaches for describing and integrating the latest knowledge on biotic and abiotic stress responses in Quercus spp., with special reference to Quercus ilex, the system on which the authors have been working for the last 15 years. While biotic stress factors mainly include fungi and insects such as Phytophthora cinnamomi, Cerambyx welensii, and Operophtera brumata, abiotic stress factors include salinity, drought, waterlogging, soil pollutants, cold, heat, carbon dioxide, ozone, and ultraviolet radiation. The review is structured following the Central Dogma of Molecular Biology and the omic cascade, from DNA (genomics, epigenomics, and DNA-based markers) to metabolites (metabolomics), through mRNA (transcriptomics) and proteins (proteomics). An integrated view of the different approaches, challenges, and future directions is critically discussed.

Description: Wildfires and pests are natural disturbance agents in many forest ecosystems that often contribute to ecological succession, nutrient cycling, and forest species composition. Mongolian pine (Pinus sylvestris var. mongolica) is a coniferous species that plays an important role as an ecological barrier, and is widely spread in northern China. Its wood is loose; its branches, leaves, and cones contain a high level of resin and volatile oils that make the species highly flammable and the stands dominated by the species are very vulnerable to fire. Recently, resinosis on boles of Pinus sylvestris became an epidemic in China. To explore the potential effects of pests on fire, we compared the flammability of Mongolian pine barks with or without resinosis on boles using a cone calorimeter and several combustion analyses. We found that the barks from boles with resinosis had a greater oil content than the healthy trees. The study also indicated that the ignition times of the barks from boles with and without resinosis were 6.00 s (±1.73) and 22.67 s (±1.15), respectively, and that the heat release rate curves were parabolic, with peaks 225.19 and 75.27 kW/m2, respectively, for the two bark types. Additionally, because resinosis was on the low- to mid-bole of infested trees, the barks from boles with resinosis tended to be ignited much easier than those without resinosis. This clearly evidenced that pests could affect fire severity and behavior by increasing forest flammability. More information about the role that pests play in the different forest cover types is needed to increase our understanding of fire danger and to develop sound forest management policies.

Description: Organogenesis and somatic embryogenesis have been widely applied as the two main regeneration pathways in plant tissue cultures. However, recalcitrance is still the main restriction in the clonal propagation of many woody species, especially in conifers. They undergo a “phase change” that leads to significant loss of vegetative propagation capacity, reducing the aptitude of tissues and organs to be regenerated in vitro beyond this point. In line with this, the in vitro regeneration of mature conifer trees has been a long-cherished goal in many laboratories worldwide. Based on previous works in Pinus species regeneration from adult trees, we now present data about the culture of apical shoot buds in an attempt to induce organogenesis and somatic embryogenesis to clone mature trees of Aleppo pine (Pinus halepensis). Reinvigorated axillary shoots were submitted to conditions usually applied to induce somatic embryogenesis through the manipulation of culture media, including the use of auxins such as 2,4-Dichlorophenoxyacetic acid and 1-Naphthaleneacetic acid, cytokinins (6-benzyladenine and kinetin), and phytosulfokine (50, 100, and 200 nM). Although somatic embryos could not be obtained, an embryogenic-like tissue was produced, followed by the emergence of actively proliferating non-embryogenic calli. Variations in the consistence, texture, and color of non-embryogenic calli were observed; especially those arising in the media containing phytosulfokine. Reinvigorated shoots, induced by 22 or 44 µM 6-benzyladenine, were obtained through organogenesis and acclimatized, and phenotypically normal plants were obtained.

Description: This paper provides an updating of information of a selected number of major phytoplasma diseases of forest trees, with a focus on the associated phytoplasma taxa. Phytoplasma diseases of forest trees have been less extensively studied than those affecting fruit trees. Research on the role of phytoplasmas as the cause of diseases of forest trees has only in the last few years been intensified, after sensitive and specific detection methods greatly based on PCR technology became available. Various phytoplasma taxa have been identified in naturally infected elm, ash, conifer, sandal, and eucalyptus trees, whereas only one phytoplasma taxon has been recorded in naturally infected alder trees. However, for almost all of the reviewed diseases, there is still sparse information about insect vectors, plant host range, strain virulence, pathogenicity, and host tolerance and resistance. Knowledge of these aspects is the basis for appropriate disease management. In particular, further research is required to clarify the role of phytoplasmas in asymptomatic trees. In addition, the etiological role of various “non-specific” phytoplasma taxa, which have been recorded in forest trees, while no data from pathological studies are available, needs to be further investigated.

Description: A few studies in young mixedwood stands demonstrate that precommercial thinning of aspen at early ages can improve the growth of spruce and increase stand resilience to drought. However, information on tree and stand responses to thinning in older mixedwood stands is lacking. To address this need, a study was initiated in 2008 in Alberta, Canada in 14 boreal mixedwood stands (seven each at ages 17 and 22). This study investigated growth responses following thinning of aspen to five densities (0, 1000, 2500, 5000 stems ha−1 and unthinned (control)). Measurements were collected in the year of establishment, and three and eight years later. Mortality of aspen in the unthinned plots was greater than in the thinned plots which were not significantly different amongst each other. Eight years following treatment, aspen diameter was positively influenced by thinning, while there was no effect on aspen height. The density of aspen had no significant effect on the survival of planted spruce. Spruce height and diameter growth increased with both aspen thinning intensity and time since treatment. Differentiation among treatments in spruce diameter growth was evident three years from treatment, while differentiation in height was not significant until eight years following treatment. Yield projections using two growth models (Mixedwood Growth Model (MGM) and Growth and Yield Projection System (GYPSY)) were initialized using data from the year eight re-measurements. Results indicate that heavy precommercial aspen thinning (to ~1000 aspen crop trees ha−1) can result in an increase in conifer merchantable volume without reducing aspen volume at the time of harvest. However, light to moderate thinning (to ~2500 aspen stems ha−1 or higher), is unlikely to result in gains in either deciduous or conifer merchantable harvest volume over those of unthinned stands.

Description: The spatial heterogeneity of plant diversity at the neighborhood scale has less been understood, although it is very important for the planning and management of neighborhood landscape. In this case study of Beijing, we conducted intensive investigations of the plant diversity in different neighborhoods along a rural–urban gradient. The results showed that the mean numbers of plant species per neighborhood were 30.5 for trees, 18.8 for shrubs, and 31.9 for herbs, respectively. There were significant logarithmic relationships between the numbers of species and patch area, indicating that larger patches within neighborhoods could harbor more plant species. Hierarchical linear modeling showed that the variations in plant diversity within neighborhoods were higher than those between neighborhoods. The number of species increased logistically with both the number of patches within neighborhoods and the number of neighborhoods, suggesting that it is important to sample a sufficient number of patches within neighborhoods, as well as a sufficient number of neighborhoods in order to sample 90% of the plant species during the investigation of plant diversity in urban neighborhoods. So the hierarchical design of sampling should be recommended for investigating plant diversity in urban areas.

Description: Motor-manual operations are commonly implemented in the traditional and short rotation forestry. Deep knowledge of their performance is needed for various strategic, tactical and operational decisions that rely on large amounts of data. To overcome the limitations of traditional analytical methods, Artificial Intelligence (AI) has been lately used to deal with various types of signals and problems to be solved. However, the reliability of AI models depends largely on the quality of the signals and on the sensing modalities used. Multimodal sensing was found to be suitable in developing AI models able to learn time and location-related data dependencies. For many reasons, such as the uncertainty of preserving the sensing location and the inter- and intra-variability of operational conditions and work behavior, the approach is particularly useful for monitoring motor-manual operations. The main aim of this study was to check if the use of acceleration data sensed at two locations on a brush cutter could provide a robust AI model characterized by invariance to data sensing location. As such, a Multi-Layer Perceptron (MLP) with backpropagation was developed and used to learn and classify operational events from bimodally-collected acceleration data. The data needed for training and testing was collected in the central part of Romania. Data collection modalities were treated by fusion in the training dataset, then four single-modality testing datasets were used to check the performance of the model on a binary classification problem. Fine tuning of the regularization parameters (α term) has led to acceptable testing and generalization errors of the model measured as the binary cross-entropy (log loss). Irrespective of the hyperparameters’ tunning strategy, the classification accuracy (CA) was found to be very high, in many cases approaching 100%. However, the best models were those characterized by α set at 0.0001 and 0.1, for which the CA in the test datasets ranged from 99.1% to 99.9% and from 99.5% to 99.9%, respectively. Hence, data fusion in the training set was found to be a good strategy to build a robust model, able to deal with data collected by single modalities. As such, the developed MLP model not only removes the problem of sensor placement in such applications, but also automatically classifies the events in the time domain, enabling the integration of data collection, handling and analysis in a simple less resource-demanding workflow, and making it a feasible alternative to the traditional approach to the problem.

Description: Background and Objectives—Coexisting tree and shrub species will have to withstand more arid conditions as temperatures keep rising in the Mediterranean Basin. However, we still lack reliable assessments on how climate and drought affect the radial growth of tree and shrub species at intra- and interannual time scales under semi-arid Mediterranean conditions. Materials and Methods—We investigated the growth responses to climate of four co-occurring gymnosperms inhabiting semi-arid Mediterranean sites in northeastern Spain: two tree species (Aleppo pine, Pinus halepensis Mill.; Spanish juniper, Juniperus thurifera L.) and two shrubs (Phoenicean juniper, Juniperus phoenicea L.; Ephedra nebrodensis Tineo ex Guss.). First, we quantified the intra-annual radial-growth rates of the four species by periodically sampling wood samples during one growing season. Second, we quantified the climate–growth relationships at an interannual scale at two sites with different soil water availability by using dendrochronology. Third, we simulated growth responses to temperature and soil moisture using the forward, process-based Vaganov‒Shashkin (VS-Lite) growth model to disentangle the main climatic drivers of growth. Results—The growth of all species peaked in spring to early summer (May–June). The pine and junipers grew after the dry summer, i.e., they showed a bimodal growth pattern. Prior wet winter conditions leading to high soil moisture before cambium reactivation in spring enhanced the growth of P. halepensis at dry sites, whereas the growth of both junipers and Ephedra depended more on high spring–summer soil moisture. The VS-Lite model identified these different influences of soil moisture on growth in tree and shrub species. Conclusions—Our approach (i) revealed contrasting growth dynamics of co-existing tree and shrub species under semi-arid Mediterranean conditions and (ii) provided novel insights on different responses as a function of growth habits in similar drought-prone regions.

Description: Research highlights: Funding forest management with subsidies from carbon offsetters is a well-documented mechanism in tropical regions. This article provides complementary insights into the use of voluntary offset contracts in temperate forests. Background and objectives: The mitigation of greenhouse emissions has become a major global issue, leading to changes in forest management to increase the capacity of forests to store carbon. This can lead to conflicts of use with other forest ecosystem services such as timber production or biodiversity conservation. Our main goal is to describe collective actions to fund carbon-oriented forestry with subsidies from carbon offsetters and to analyze how their governance and functioning prevent conflicts pertaining to multi-functionality. Materials and methods: We assembled an interdisciplinary research team comprising two ecologists, a social scientist, and an economist. Drawing on a conceptual framework of ecosystem services, social interdependencies, and collective action, we based our qualitative analysis on semi-structured interviews from two French case studies. Results: Carbon-oriented intermediary forest organizations offer offset contracts to private firms and public bodies. Communication is geared toward the mitigation outcomes of the contracts as well as their beneficial side effects in providing the ecosystem services of interest to the offsetters. Subsidies then act as a financial lever to fund carbon-oriented forestry operations. Scientific committees and reporting methodologies serve as environmental, social, and economic safeguards. Conclusions: These new intermediary forest organizations use efficient forest operations and evaluation methodologies to improve forest carbon storage. Their main innovation lies in their collective governance rooted in regional forest social-ecological systems. Their consideration of multi-functionality and socioeconomic issues can be seen as an obstacle to rapid development, but they ensure sustainability and avoid conflicts between producers and beneficiaries of forest ecosystem services. Attention must be paid to interactions with broader spatial and temporal carbon policies.

Description: Forestry harvesting represents an important economic activity around the world. Habitat degradation due to forest harvesting contributes to biodiversity loss; therefore, it is necessary to implement logging management aimed at reducing its impact. Forest management by reduce-impact logging (RIL) involves cutting trees following regulations focused on diminishing the impact on biodiversity by following harvesting plans based on forestry inventories and participation of trained workers. In Mexico, RIL is applied mainly in temperate habitats and its effectiveness has been assessed based on vascular plants. In this study, we analyzed the diversity and community structure of terrestrial and epiphytic mosses in managed (sites number = 3) and conserved (sites number = 3) sites in the temperate forest of Sierra Juárez, Oaxaca, Mexico. Likewise, we evaluated the potential function of mosses as indicators of habitat degradation. Environmental variables were also quantified at local (canopy coverage, altitude, daily temperature, and light) and regional (total annual rainfall, orientation, and slope) scales to evaluate potential relationships with the community and species diversity. We documented 70 mosses species with a diversity (alfa, beta) and community structure similar between managed and conserved sites. For terrestrial mosses, we found marginal differences in their communities, likely related to species coverture variation in managed sites. The diversity and community structure epiphytic mosses were not statistically different in managed and conserved sites. Only the daily variation in light intensity was positively related to the variation of alpha diversity of epiphytic mosses. The species Dicranum sumichrastii Duby and Leptodontium viticulosoides (P. Beauv.) Wijk & Margad. can be considered as ecological indicators for conserved and managed sites, respectively, likely due to their relationship with light and humidity conditions. Our results suggest that that forest management by RIL could be considered as a promising tool to balance timber production and moss diversity.

Description: The intensity and frequency of drought have increased considerably during the last decades in southeastern Europe, and projected scenarios suggest that southern and central Europe will be affected by more drought events by the end of the 21st century. In this context, assessing the intraspecific genetic variation of forest tree species and identifying populations expected to be best adapted to future climate conditions is essential for increasing forest productivity and adaptability. Using a tree-ring database from 60 populations of 38-year-old silver fir (Abies alba) in five trial sites established across Romania, we studied the variation of growth and wood characteristics, provenance-specific response to drought, and climate-growth relationships during the period 1997–2018. The drought response of provenances was determined by four drought parameters: resistance, recovery, resilience, and relative resilience. Based on the standardized precipitation index, ten years with extreme and severe drought were identified for all trial sites. Considerable differences in radial growth, wood characteristics, and drought response parameters among silver fir provenances have been found. The provenances’ ranking by resistance, recovery, and resilience revealed that a number of provenances from Bulgaria, Italy, Romania, and Czech Republic placed in the top ranks in almost all sites. Additionally, there are provenances that combine high productivity and drought tolerance. The correlations between drought parameters and wood characters are positive, the most significant correlations being obtained between radial growth and resilience. Correlations between drought parameters and wood density were non-significant, indicating that wood density cannot be used as indicator of drought sensitivity. The negative correlations between radial growth and temperature during the growing season and the positive correlations with precipitation suggest that warming and water deficit could have a negative impact on silver fir growth in climatic marginal sites. Silvicultural practices and adaptive management should rely on selection and planting of forest reproductive material with high drought resilience in current and future reforestation programs.

Description: Acacia spp. are exotic tree species that have been widely planted on man-made slopes in Hong Kong since the 1960s. However, as they become mature and senescent, they may become a concern and cause various problems, including soil constraints for plant growth, decreasing provision of intended ecosystem services, declining syndromes, arrested succession, and high risk of failure. In this perspective paper, we present and discuss these problems using practical examples of Acacia-dominated urban forests on man-made roadside slopes in Hong Kong, based on a cross-disciplinary survey and a literature review. To conclude, we suggest that selective cutting, specific silvicultural operations of Acacia plantations, and the management of plantation edge and soils can be exercised, along with the planting of native species, to potentially alleviate these problems associated with mature Acacia plantations, by promoting the establishment of native forests, enhancing biodiversity, expediting succession, and providing better ecosystem services.

Description: Vegetation cover plays a key role in terrestrial ecosystem; therefore, it is important for researchers to investigate the variation and influencing factors of vegetation cover. China has experienced a large-scale vegetation cover change in recent years. We summarized the literature of vegetation cover change and revealed how large-scale anthropogenic activities influence vegetation cover change in China. Afforestation and intensification of cropland played a key role in large-scale greening. Urbanization showed a “U” shape to influence vegetation cover change. Mining and reclamation, land abandonment and land consolidation, and regional natural protection all had a unique influence on the change of vegetation cover. Indeed, the large-scale vegetation cover change was caused by interaction of anthropogenic factors and part human-driven climate change. Anthropogenic factors influenced climate change to indirectly alter the condition of plant growth. Interaction between climate change and human activities influence on vegetation cover still needs to be further investigated in the future.

Description: The environmental impact of deposit development can be indirect and can cause combined geochemical processes in ecosystems. These must be taken into consideration under environmental forecasting and environmental risk assessment. Soil degradation in the Taiga Forest is considered, within the area of Verkhnekamskoye potash deposit (Russia), as an example of such environmental transformation. Here, the mechanism and characteristics of the anthropogenic salinisation of alluvial soils under potash deposit development are newly described. It was found that there is a strong anthropogenic impact of the potash industry on valley soils where the contaminated Na-Cl groundwater discharges or is close to the surface. The valley soils are characterised by high salinity, and the sum of toxic salts in soils has reached 26%. Alluvial gley humic clay chloride saline soil (Gleyic Fluvisols (Salic, Loamic, Technic)) and secondary solonchak on alluvial humic clay soil sulphate-chloride gypsum-containing surface-gleyed (Chloridic Gleyic Fluvic Solonchak (Hypersalic, Loamic, Technic)) were formed in hydromorphic conditions. Morphological, physicochemical and mineralogical analyses were carried out. Under hydromorphic conditions, Chloridic Gleyic Fluvic Solonchak (Hypersalic, Loamic) was described to show a hydrotroillite layer and reddish-yellow iron-rich precipitates on its surface. The top soil horizon has the highest content of iron minerals (up to 84.9%) and Fe-bearing plant residues (up to 20%). Additionally, the spongy and gel-like organic materials, as well as the siliceous remains of diatoms, are enriched in Ca, Fe, Cl, K, Na, S and P. The lower soil horizon consists of black gel-like phases and hydrogen sulphide settings with a high content of plant residues. The insoluble part of the samples contains up to 84% hydrogoethite. The sources of iron in soils and bottom sediments include the iron-enriched Sheshma sediments speckled rocks, slurry material, halite wastes and soil minerals of alluvial gley soils.

Description: Understanding the patterns of biodiversity and their relationship with environmental gradients is a key issue in ecological research and conservation in forests [...]

Description: Bioindicators assess the mangroves ecological state according to the types of pressures but they differ with the ecosystem’s specificities. We investigated benthic meiofauna diversity and structure within the low human-impacted mangroves in French Guiana (South America) in response to sediment variables with various distances to the main city. Contaminant’s concentrations differed among the stations, but they remained below toxicity guidelines. Meiofauna structure (Foraminifera, Kinorhyncha, Nematoda) however varied accordingly. Nematode’s identification brought details on the sediment’s quality. The opportunistic genus Paraethmolaimus (Jensen, 1994) strongly correlated to the higher concentrations of Hg, Pb. Anoxic sediments were marked by organic enrichment in pesticides, PCB, and mangrove litter products and dominance of two tolerant genus, Terschellingia (de Man, 1888) and Spirinia (Gerlach, 1963). In each of these two stations, we found many Desmodora individuals (de Man, 1889) with the presence of epibionts highlighting the nematodes decreased fitness and defenses. Oxic sediments without contaminants were distinguished by the sensitive genera Pseudocella (Filipjev, 1927) and a higher diversity of trophic groups. Our results suggested a nematodes sensitivity to low contaminants concentrations. Further investigations at different spatio-temporal scales and levels of deterioration, would be necessary to use of this group as bioindicator of the mangroves’ ecological status.

Description: This study describes a multi-wavelength spectroscopic method for the determination of carboxyl group content of nanocellulose. Methylene blue (MB) was used as a color indicator, which can bind to the carboxyl groups in nanocellulose to form a R-COOMB complex with a binding ratio of 1:1, although the spectrums of MB and R-COOMB at 500–750 nm are overlapped, and solid impurities could cause spectral interference. To solve these issues, a multi-wavelength spectroscopic measurement on a MB and nanocellulose mixture solution technique and mathematical model were developed, allowing the content of carboxyl groups in nanocellulose to be quantified. The results showed that the method has good measurement precision and accuracy as compared with those measured by a reference method. The method is simple and requires only a small sample size for testing and thus makes it suitable for nanocellulose related research and applications.

Description: Studies of biomass and carbon dynamics and community composition change after forest wind disturbance have predominantly examined trends after low and intermediate severity events, while studies after very severe wind disturbance have been few. This study documents trends in aboveground biomass and carbon across 10 years of forest recovery after severe wind disturbance. In July 1989, a tornado struck mature Tsugacanadensis-Pinusstrobus forest in northwest Connecticut, USA, causing damage across roughly 8 ha. Canopy tree damage and regeneration were surveyed in 1991 and 1999. Two primary hypotheses were tested, both of which derive from regeneration being primarily via the release of suppressed saplings rather than new seedling establishment: (1) Biomass and carbon accumulation will be faster than accumulation reported from a similar forest that experienced similar severity of wind disturbance; and (2) The stand will experience very little change in species composition or diversity. Estimated immediate post-disturbance (1989) aboveground live-tree carbon was 20.7 ± 43.9 Mg ha−1 (9.9% of pre-disturbance) Ten years after the disturbance, carbon in aboveground live tree biomass increased to 37.1 ± 47.9 Mg ha−1; thus for the first decade, annual accumulation averaged 1.6 Mg ha−1 of carbon; this was significantly faster than the rate reported in a similar forest that experienced similar severity of wind disturbance. The species diversity of woody stems ten years after the disturbance was significantly higher (nonoverlapping confidence intervals of rarefaction curves) than pre-disturbance canopy trees. Thus, hypothesis 1 was confirmed while hypothesis 2 was rejected. This study augments the limited number of longer-term empirical studies that report biomass and carbon accumulation rates after wind disturbance, and can therefore serve as a benchmark for mechanistic and modeling research.

Description: This paper examines the strength of wood adhesive bonds at high temperatures. The goal of this research is to better understand the conditions of heat delamination in cross laminated timber (CLT) that is exposed to fire. Heat delamination in CLT occurs when one lamination detaches from the composite panel before the char front reaches the bondline. Timber that falls from the panel, as a result of delamination, contributes additional fuel to the fire, which can cause fire regrowth, while the loss of a lamination causes a sudden loss in strength. Currently, to demonstrate that an adhesive does not delaminate, it must pass a full scale (6 m by 3 m) compartment fire test as prescribed in the PRG-320 product standard. In this work, we scaled down the mechanical loads and temperatures to 300 mm lap shear specimens. Seven different adhesives were tested and compared against solid wood controls with the same geometry as the lap shear specimens. Quasi-static tests were run where the specimens were loaded to failure at 25 °C and 260 °C, when the samples were at thermal equilibrium. Additionally, creep tests were performed where the load and temperature ramp was matched to the adhesive bondline temperatures measured in the large scale PRG-320 tests. With the exception of some of the polyurethane formulations, all adhesives passed the scaled-down creep test that resembles the PRG-320 standard. Of the polyurethane adhesives tested, only one formulation remained intact for the duration of the test. These results can be used to help better predict which adhesives may pass the PRG-320 test prior to full scale testing.

Description: Genetic variation and phenotypic stability in Norway spruce were studied based on provenances, families, and clones planted in trials at 12 sites in four Nordic countries. The families were generated in a factorial cross between 10 parents of Norwegian origin and 10 parents of Eastern European origin, and the clones were propagated from seedlings within 20 of the same families. Traits analyzed were survival, proportion of trees with stem defects, and tree heights. Stability was analyzed by regression analyses with the genetic entries’ annual shoot increment as the dependent variable and the total site mean as an environmental index. Information about growth and phenology traits were available from short-term tests. For tree heights, significant variance components were present both among female and male parents, but not for their interactions, indicating that non-additive genetic effects are small. Genotype × environment interactions were significant at all three genetic levels, but their variance components had considerably lower values than the variance components estimated for the effects of families and clones. For the set of families of Norwegian origin, strong relationships were observed between the timing of annual shot elongation, mortality, and height growth. Large variation was found at all three genetic levels for phenotypic stability measured by regression coefficients. A positive relationship was present between the regression coefficient and the timing of annual shoot growth for families, indicating that later flushing families responded more to a high site index. The regression coefficient can be a useful supplement to the breeding value when selecting for superior and stable genotypes.

Description: Plant architecture improvement is of great significance in influencing crop yield, harvesting efficiency and ornamental value, by changing the spatial structure of the canopy. However, the mechanism on plant architecture in woody plants is still unclear. In order to study the genetic control of plant architecture traits and promote marker-assisted selection (MAS), a genetic linkage map was constructed, and QTL mapping was performed. In this study, using 188 BC2 progenies as materials, a genetic map of Lagerstroemia was constructed using amplification fragment length polymorphisms (AFLP) and simple sequence repeats (SSR) markers, and the QTLs of four key plant architecture traits (plant height, crown width, primary lateral branch height and internode length) were analyzed. The genetic map contains 22 linkage groups, including 198 AFLP markers and 36 SSR markers. The total length of the genome covered by the map is 1272 cM, and the average distance between markers is 6.8 cM. Three QTLs related to plant height were located in LG1, LG4 and LG17 linkage groups, and the phenotypic variation rates were 32.36, 16.18 and 12.73%, respectively. A QTL related to crown width was located in LG1 linkage group, and the phenotypic variation rate was 18.07%. Two QTLs related to primary lateral branch height were located in the LG1 and LG7 linkage groups, and the phenotypic variation rates were 20.59 and 15.34%, respectively. Two QTLs related to internode length were located in the LG1 and LG20 linkage groups, and the phenotypic variation rates were 14.86 and 9.87%. The results provide a scientific basis for finely mapping genes of plant architecture traits and marker-assisted breeding in Lagerstroemia.

Description: The understanding of spatial distribution patterns of native riparian tree species in Europe lacks accurate species distribution models (SDMs), since riparian forest habitats have a limited spatial extent and are strongly related to the associated watercourses, which needs to be represented in the environmental predictors. However, SDMs are urgently needed for adapting forest management to climate change, as well as for conservation and restoration of riparian forest ecosystems. For such an operative use, standard large-scale bioclimatic models alone are too coarse and frequently exclude relevant predictors. In this study, we compare a bioclimatic continent-wide model and a regional model based on climate, soil, and river data for central to south-eastern Europe, targeting seven riparian foundation species—Alnus glutinosa, Fraxinus angustifolia, F. excelsior, Populus nigra, Quercus robur, Ulmus laevis, and U. minor. The results emphasize the high importance of precise occurrence data and environmental predictors. Soil predictors were more important than bioclimatic variables, and river variables were partly of the same importance. In both models, five of the seven species were found to decrease in terms of future occurrence probability within the study area, whereas the results for two species were ambiguous. Nevertheless, both models predicted a dangerous loss of occurrence probability for economically and ecologically important tree species, likely leading to significant effects on forest composition and structure, as well as on provided ecosystem services.

Description: Environmental changes in national parks are generally subject to constant observation. A particular case is parks located in mountains, which are more vulnerable to climate change and the binding of pollutants in mountain ranges as orographic barriers. The effectiveness of forest soil monitoring networks based on a systematic grid with a predetermined density has not been analysed so far. This study’s analysis was conducted in the Stolowe Mountains National Park (SMNP), SW Poland, using total Pb concentration data obtained from an initial network of 403 circle plots with centroids arranged in a regular 400 × 400 m square grid. The number and distribution of monitoring plots were analysed using geostatistical tools in terms of the accuracy and correctness of soil parameters obtained from spatial distribution imaging. The analysis also aimed at reducing the number of monitoring plots taking into account the economic and logistic aspects of the monitoring investigations in order to improve sampling efficiency in subsequent studies in the SMNP. The concept of the evaluation and modification of the monitoring network presented in this paper is an original solution and included first the reduction and then the extension of plot numbers. Two variants of reduced monitoring networks, constructed using the proposed procedure, allowed us to develop the correct geostatistical models, which were characterised by a slightly worse mean standardised error (MSE) and root mean squared error (RMSE) compared to errors from the original, regular monitoring network. Based on the new geostatistical models, the prediction of Pb concentration in soils in the reduced grids changed the spatial proportions of areas in different pollution classes to a limited extent compared to the original network.

Description: Improved mechanistic understanding of soil methane (CH4) exchange responses to shifts in soil moisture and temperature in forest ecosystems is pivotal to reducing uncertainty in estimates of the soil-atmospheric CH4 budget under climate change. We investigated the mechanism behind the effects of soil moisture and temperature shifts on soil CH4 fluxes under laboratory conditions. Soils from the Huai River Basin in China, an area that experiences frequent hydrological shifts, were sampled from two consecutive depths (0–20 and 20–50 cm) and incubated for 2 weeks under different combinations of soil moisture and temperature. Soils from both depths showed an increase in soil moisture and temperature-dependent cumulative CH4 fluxes. CH4 production rates incubated in different moisture and temperature in surface soil ranged from 1.27 to 2.18 ng g−1 d−1, and that of subsurface soil ranged from 1.18 to 2.34 ng g−1 d−1. The Q10 range for soil CH4 efflux rates was 1.04–1.37. For surface soils, the relative abundance and diversity of methanotrophs decreased with moisture increase when incubated at 5 °C, while it increased with moisture increase when incubated at 15 and 30 °C. For subsurface soils, the relative abundance and diversity of methanotrophs in all samples decreased with moisture increase. However, there was no significant difference in the diversity of methanogens between the two soil depths, while the relative abundance of methanogens in both depths soils increased with temperature increase when incubated at 150% water-filled pore space (WFPS). Microbial community composition exhibited large variations in post incubation samples except for one treatment based on the surface soils incubated at 15 °C, which showed a decrease in the total and unique species number of methanotrophs with moisture increase. In contrast, the unique species number of methanogens in surface soils increased with moisture increase. The analysis of distance-based redundancy analysis (db-RDA) showed that soil pH, dissolved organic carbon (DOC), dissolved organic nitrogen (DON), microbial biomass carbon (MBC), NO3−-N, and NH4+-N mainly performed a significant effect on methanotrophs community composition when incubated at 60% WFPS, while they performed a significant effect on methanogens community composition when incubated at 150% WFPS. Overall, our findings emphasized the vital function of soil hydrology in triggering CH4 efflux from subtropical plantation forest soils under future climate change.

Description: Crown architecture has long been evaluated for its impact on taper modeling. However, most of the research has focused on a limited number of crown dimensions. This study examined the effect of adding several crown dimensions in improving the diameter and volume estimates of Dahurian larch, Korean spruce, and Manchurian fir in northeast China. The crown dimensions included crown length, crown ratio, crown width, height to live crown base, diameter at the crown base, and crown shape. A well-known taper model of Clark et al. (1991) was fitted to the data of 276 trees from natural stands. To adjust the inherent autocorrelation in the data, we added a third-order continuous-time error structure in the model fit. Model fitting was carried out with the NLMIXED procedure (Non-linear Mixed Procedure), followed by the MODEL procedure of SAS using the generalized nonlinear least-squares method. Fit statistics and graphical assessments were used to evaluate the original and modified models. Above 98% of the total variance of d was explained by the models for all species. The addition of crown variables showed slight improvements for root mean square error (RMSE) values in the analyzed species. The RMSE plots indicated that the models with crown variables slightly improved the diameter and volume predictions for the species but only for the upper stem (〉50%–90%). The study demonstrated that crown dimensions influence the stem taper, but the original model of Clark et al. (1991) reasonably realized that effect.

Description: We investigated changes in soil chemistry and foliar metabolism of Himalayan cedar [Cedrus deodara (Roxb. Ex Lamb.) G.Don] and Himalayan spruce [Picea smithiana (Wall.) Boiss] trees along a steep elevational gradient in the lower Himalayan Mountains at Kufri, Himachal Pradesh (HP), India. The foliar and soil samples were collected from four locations along a 300 m elevational gradient at ridge, high-, mid-, and low-elevation sites within the forested Shimla Water Catchment Wildlife Sanctuary that provides water for the city of Shimla, HP,. Observations at the time of sampling revealed that the high-elevation site was being heavily grazed. Soils collected at the four sites showed differences in soil chemistry along the gradient. Surface soils (top 10 cm) at the high-elevation site had the highest concentrations of carbon, nitrogen, calcium, magnesium, phosphorus, organic matter, and effective cation exchange capacity, possibly caused by grazing. Mineral soils were slightly acidic at all sites except the mid-elevation site, which was extremely acidic in the upper mineral soil. Similar to surface soil chemistry, foliar metabolism was also comparatively unique for high elevation. In Himalayan cedar foliage, higher concentrations of soluble proteins, polyamines, amino acids, and potassium were observed at the high-elevation site as compared to the ridge, mid and low elevations. No major differences were observed in the metabolic profiles of cedar between the ridge and low elevation ranges. Spruce foliage was sampled only from the ridge and low elevations and its metabolic profiles suggested healthier conditions at the low elevation. The results of the study demonstrate the impact of the interplay between local and regional drivers of forest health on cedar and spruce trees in a forested catchment that acts as a water source for downstream communities.

Description: There is a demand for more progressive restoration directives to regenerate forest ecosystems impacted by harvesting, wildfire, insect outbreaks, and mineral resource extraction. Forest restoration may take many decades and even centuries without active silvicultural intervention to grow large trees that provide suitable habitat for various wildlife species. We tested the hypotheses (H) that, compared with unmanaged (unthinned and old-growth) stands, large-scale precommercial thinning (heavy thinning to

Description: Addis Ababa, the capital of Ethiopia, is urbanizing very fast. This study aimed to assess urban expansion and Urban Green Spaces (UGS) change in the city from 1989 to 2019. Remote Sensing and Geographical Information System (GIS) and Landscape Expansion Index (LEI) were used to extract Land Use Land Cover (LULC) data, measure urban expansion and UGS change and analyze urban growth pattern in inner zone, outer zone and eight quadrants. The results showed that urban area in the inner zone increased from 3712 ha to 3716 ha (0.1%), and from 3716 ha to 3874 ha (4.2%) and in the first (1989–1999) and second periods (1999–2009), while it decreased from 3874 ha to 3733 ha (3.6%) in the third period (2009–2019), portraying a non-unidirectional trend of change. Conversely, the UGS in the inner zone decreased from 60 ha to 54 ha (10%), and from 54 ha to 38 ha (29.6%) in the first and second periods, while it increased from 38 ha to 53 ha (39.4%) in the third period, reporting spatial tradeoff between the two land cover types. Meanwhile, urban areas in the outer zone increased from 10,729 ha to 15,112 ha (40%), from 15,112 ha to 21,377 ha (41.4%) and from 21,377 ha to 28,176 ha (31.8%) in the first, second and third periods, respectively, representing frontiers of suburbanization. On the other hand, the UGS in the outer zone decreased from 3624 ha to 3171 ha, from 3127 ha to 2555 ha and from 2555 ha to 1879 ha, with an annual rate of decline of 1.25%, 1.8% and 2.6%, respectively, showing increasing trend of UGS destruction for urban construction. Furthermore, the LEI analysis result showed that urban expansion pattern demonstrated largely an outlying growth characterized by differentiation and isolation of patches, whereas the infill and edge expansion pattern were insignificant and fluctuated over 30 years. Furthermore, the directional analysis showed that urban area predominately expanded in SEE,〉 SSE,〉 SSW,〉 SWW,〉 and NEE directions with varying magnitude in the first, second and third period, but decreased in third period in NWW, 〈 NNW〈 and NNE directions. In response to such urban growth pattern, the center of gravity of urban area shifted from north to south during the study period, displaying main direction urbanization in recent years. Conclusively, zonal and directional studies are more effective in characterizing the Spatio-temporal dynamics variabilities of urban expansion and UGS change for informed urban planning towards sustainable urban development.

Description: Soil erosion is one of the major processes degrading the natural environment but also agricultural production areas. Soil erosion may lead to soil organic carbon (SOC) loss, especially from sloping agricultural terrain units. The use of phytomelioration in environmental management, particularly long-term, permanent forest vegetation, is widely recognized as a possible measure for soil erosion protection and mitigation of climate change through carbon sequestration. The aim of this study was to compare of the topsoil organic carbon stocks on the slopes under soil-protecting forests in relation to the adjacent agricultural slopes. The research was conducted in the young glacial landscape of North-Central Poland. The study indicated the significant role of forest management on the increase of soil organic matter content and SOC stock. The results show that land use and slope gradients are important factors controlling soil organic carbon pools in topsoil in young glacial areas. This topic is extremely important particularly as the effects of climate change become more and more visible, and society faces new challenges in preventing these changes.

Description: In recent years, due to the shortage of timber resources, it has become necessary to reduce the excessive consumption of forest resources. Non-destructive testing technology can quickly find wood defects and effectively improve wood utilization. Deep learning has achieved significant results as one of the most commonly used methods in the detection of wood knots. However, compared with convolutional neural networks in other fields, the depth of deep learning models for the detection of wood knots is still very shallow. This is because the number of samples marked in the wood detection is too small, which limits the accuracy of the final prediction of the results. In this paper, ResNet-34 is combined with transfer learning, and a new TL-ResNet34 deep learning model with 35 convolution depths is proposed to detect wood knot defects. Among them, ResNet-34 is used as a feature extractor for wood knot defects. At the same time, a new method TL-ResNet34 is proposed, which combines ResNet-34 with transfer learning. After that, the wood knot defect dataset was applied to TL-ResNet34 for testing. The results show that the detection accuracy of the dataset trained by TL-ResNet34 is significantly higher than that of other methods. This shows that the final prediction accuracy of the detection of wood knot defects can be improved by TL-ResNet34.

Description: Increasing numbers of explanatory variables tend to result in information redundancy and “dimensional disaster” in the quantitative remote sensing of forest aboveground biomass (AGB). Feature selection of model factors is an effective method for improving the accuracy of AGB estimates. Machine learning algorithms are also widely used in AGB estimation, although little research has addressed the use of the categorical boosting algorithm (CatBoost) for AGB estimation. Both feature selection and regression for AGB estimation models are typically performed with the same machine learning algorithm, but there is no evidence to suggest that this is the best method. Therefore, the present study focuses on evaluating the performance of the CatBoost algorithm for AGB estimation and comparing the performance of different combinations of feature selection methods and machine learning algorithms. AGB estimation models of four forest types were developed based on Landsat OLI data using three feature selection methods (recursive feature elimination (RFE), variable selection using random forests (VSURF), and least absolute shrinkage and selection operator (LASSO)) and three machine learning algorithms (random forest regression (RFR), extreme gradient boosting (XGBoost), and categorical boosting (CatBoost)). Feature selection had a significant influence on AGB estimation. RFE preserved the most informative features for AGB estimation and was superior to VSURF and LASSO. In addition, CatBoost improved the accuracy of the AGB estimation models compared with RFR and XGBoost. AGB estimation models using RFE for feature selection and CatBoost as the regression algorithm achieved the highest accuracy, with root mean square errors (RMSEs) of 26.54 Mg/ha for coniferous forest, 24.67 Mg/ha for broad-leaved forest, 22.62 Mg/ha for mixed forests, and 25.77 Mg/ha for all forests. The combination of RFE and CatBoost had better performance than the VSURF–RFR combination in which random forests were used for both feature selection and regression, indicating that feature selection and regression performed by a single machine learning algorithm may not always ensure optimal AGB estimation. It is promising to extending the application of new machine learning algorithms and feature selection methods to improve the accuracy of AGB estimates.

Description: Organic acids are critical as secondary metabolites for plant adaption in a stressful situation. Oxalic acid, tartaric acid, and malic acid can improve plant tolerance under waterlogged conditions. Two prominent woody species (Taxodium distichum-Swamp cypress and Salix matsudana-Chinese willow) have been experiencing long-term winter submergence and summer drought in the Three Gorges Reservoir. The objectives of the present study were to explore the responses of the roots of two woody species during flooding as reflected by root tissue concentrations of organic acids. Potted sample plants were randomly divided into three treatment groups: control, moderate submergence, and deep submergence. The concentrations of oxalic acid, tartaric acid, and malic acid in the main root and lateral roots of the two species were determined at four stages. The results showed that T. distichum and S. matsudana adapted well to the water regimes of the reservoir, with a survival rate of 100% during the experiment period. After experiencing a cycle of submergence and emergence, the height and base diameter of the two species showed increasing trends. Changes in base diameter showed insignificant differences between submergence treatments, and only height was significant under deep submergence. The concentrations of three organic acids in the roots of two species were influenced by winter submergence. After emergence in spring, two species could adjust their organic acid metabolisms to the normal level. Among three organic acids, tartaric acid showed the most sensitive response to water submergence, which deserved more studies in the future. The exotic species, T. distichum, had a more stable metabolism of organic acids to winter flooding. However, the native species, S. matsudana, responded more actively to long-term winter flooding. Both species can be considered in vegetation restoration, but it needs more observations for planting around 165 m above sea level, where winter submergence is more than 200 days.

Description: Despite the immense amount of diversity present in the soil biota, the ecological and evolutionary processes that regulate species diversity and abundance of ectomycorrhizal (ECM) fungi across space and time remain elusive. In forest ecosystems, ECM fungal diversity may be maintained by periodic disturbances which operate at different time scales due to their effects on host genetic and phenotypic characteristics and the associated environment. To investigate the degree to which these factors shape ECM fungal community composition and function, I sampled 10 independent sites for a pine species indicative of an endangered ecosystem, the Florida scrub, where disturbance history has driven the divergence of a single species into two genetically distinct varieties (Pinus clausa var. immuginata and var. clausa). A total of 300 ECM fungal species were identified based on rDNA ITS sequences, but each variety harbors different ECM species composition and function. A follow-up greenhouse experiment, in which the seed from each variety was grown in its own soil (“home”) and in the soil of the other variety (“away”), suggests these communities differentially impact the growth of their host seedlings. While var. clausa seedlings had the same total biomass regardless of soil origin, var. immuginata had higher biomass in their own soil compared to var. clausa. This is likely due to an increased number of ECM colonized tips in the home soil compared to in away soil. Taken together, these results may suggest different evolutionary histories where structure host genetic and phenotypic characteristics may be important for structuring their dynamics with ECM fungi.

Description: Although forest soils play an important role in the carbon cycle, the influence of topography has received little attention. Since the topographical gradient may affect CO2 emissions and C sequestration, the aims of the study were: (1) to identify the basic physicochemical and microbial parameters of the top, mid-slope, and bottom of a forest gully; (2) to carry out a quantitative assessment of CO2 emission from these soils incubated at different moisture conditions (9% and 12% v/v) and controlled temperature (25 °C); and (3) to evaluate the interdependence between the examined parameters. We analyzed the physicochemical (content of total N, organic C, pH, clay, silt, and sand) and microbial (enzymatic activity, basal respiration, and soil microbial biomass) parameters of the gully upper, mid-slope, and bottom soil. The Fourier Transformed Infrared spectroscopy (FTIR) method was used to measure CO2 emitted from soils. The position in the forest gully had a significant effect on all soil variables with the gully bottom having the highest pH, C, N concentration, microbial biomass, catalase activity, and CO2 emissions. The sand content decreased as follows: top 〉 bottom 〉 mid-slope and the upper area had significantly lower clay content. Dehydrogenase activity was the lowest in the mid-slope, probably due to the lower pH values. All samples showed higher CO2 emissions at higher moisture conditions, and this decreased as follows: bottom 〉 top 〉 mid-slope. There was a positive correlation between soil CO2 emissions and soil microbial biomass, pH, C, and N concentration, and a positive relationship with catalase activity, suggesting that the activity of aerobic microorganisms was the main driver of soil respiration. Whilst the general applicability of these results to other gully systems is uncertain, the identification of the slope-related movement of water and inorganic/organic materials as a significant driver of location-dependent differences in soil respiration, may result in some commonality in the changes observed across different gully systems.

Description: Natural disturbances shape forest ecosystem characteristics, including carbon storage and structure. Often, natural disturbances are compounded with anthropogenic disturbances, which may alter the trajectory of forest carbon stock recovery. Heterogeneous levels of disturbance severity in compound disturbance events add an additional layer of complexity. This paper examines the effect of a moderate-severity wind disturbance and subsequent salvage logging on forest biomass and carbon stock recovery over 19 years. We investigate the recovery of aboveground tree biomass following a wind disturbance and salvage logging and examine the role of wind disturbance severity on biomass accumulation rates. We use pre-disturbance, 3 years post-wind disturbance and 19 years post-wind disturbance measurements of tree biomass across two adjacent sites at Natchez Trace State Forest for Site A and Site B in east central Tennessee. We found no significant difference in the carbon storage at Site A (pre = 92 MgC/ha; 19 years post-disturbance = 83 MgC/ha) or Site B (pre = 66 MgC/ha; 19 years post-disturbance = 67) when comparing the pre-disturbance level of aboveground tree carbon storage with the 19-years post-disturbance levels. Furthermore, we found no evidence that salvage logging reduced the rate of live tree carbon accumulation. The corresponding rates of mean annual carbon accumulation (MgC/ha) are as follows: Site A Unsalvaged (1.07), Site A Salvaged (1.25) and Site B Salvaged (2.02). Contrary to our prediction, greater wind damage severity was weakly associated with higher rates of biomass accumulation (R2 = 0.17). While we found no negative effect of salvage logging on the aboveground tree carbon accumulation rate, salvage logging alters other carbon pools, including coarse woody debris. Salvage logging did not reduce the rate of carbon stock recovery, and a higher wind disturbance severity was associated with a greater rate of carbon stock recovery.

Description: In the recent decades, forest certification based on third-party external audits has gained momentum. This type of certification has been developed as a monitoring tool aimed at improving governance in corporate environmental management and differentiating products in the increasing environmentally sensitive markets. Although the scholarly literature has extensively analyzed the adoption and dissemination of forest certification, the findings of the external audits and certification practices remain under researched. On the basis of the analysis of 105 audit reports issued by accredited third-party certification bodies in Romania, this article sheds light on procedural factors that have significant influence on the characteristics of non-conformities (NCs) identified by Forest Stewardship Council (FSC) third party audits. Our research offers empirical evidence that certain procedural factors such as the type of assessment, auditing days, number of auditors, or the presence of foreign members in an audit team have a significant influence on the auditing process outcomes: number and grade of non-conformities, standard references, or methods of NC detection. The study opens interesting new lines of research—the influence of procedural or other types of contextual factors on certification outcomes—and provides indications on the effectiveness of the certification procedures and guidelines in certification process quality assurance.

Description: The mechanism of how soil carbon pools change when coniferous forests are converted into conifer-broadleaf mixed forests is poorly understood. In this study, the impact of additional carbon inputs on soil organic carbon mineralization and microbial communities was evaluated. In a microcosm incubation experiment, three types of 13C-labeled litter (Pinustabulaeformis (PT), Robiniapseudoacacia (RP), and a mixture of PT and RP (1:1, PR)) were added in to top (0–20 cm) and deep (60–80 cm) soil collected from a Chinese pine plantation. The priming effect (PE) and specific microbial groups involved in PE were studied. PT and RP addition to topsoil induced a negative PE. In deep soil, the decomposition rates of soil organic matter (SOM) after adding PT and mixture increased by 16.6% and 34.6% compared to those without litter. The addition of RP with a lower C:N ratio had a stronger negative PE than adding PT or mixture. Moreover, the PE in deep soil was more intense after all litter additions. In topsoil, the litter-derived carbon was mainly incorporated into 16:0, 18:1ω9c, and 18:1ω7c fatty acids. In conclusion, the addition of broadleaf litter into coniferous plantations might be beneficial for enhancing deep soil carbon stocks.

Description: Machine learning algorithms (MLAs) are used to solve complex non-linear and high-dimensional problems. The objective of this study was to identify the MLA that generates an accurate spatial distribution model of bark beetle (Ips typographus L.) infestation spots. We first evaluated the performance of 2 linear (logistic regression, linear discriminant analysis), 4 non-linear (quadratic discriminant analysis, k-nearest neighbors classifier, Gaussian naive Bayes, support vector classification), and 4 decision trees-based MLAs (decision tree classifier, random forest classifier, extra trees classifier, gradient boosting classifier) for the study area (the Horní Planá region, Czech Republic) for the period 2003–2012. Each MLA was trained and tested on all subsets of the 8 explanatory variables (distance to forest damage spots from previous year, distance to spruce forest edge, potential global solar radiation, normalized difference vegetation index, spruce forest age, percentage of spruce, volume of spruce wood per hectare, stocking). The mean phi coefficient of the model generated by extra trees classifier (ETC) MLA with five explanatory variables for the period was significantly greater than that of most forest damage models generated by the other MLAs. The mean true positive rate of the best ETC-based model was 80.4%, and the mean true negative rate was 80.0%. The spatio-temporal simulations of bark beetle-infested forests based on MLAs and GIS tools will facilitate the development and testing of novel forest management strategies for preventing forest damage in general and bark beetle outbreaks in particular.

Description: Forest management planning is a challenge due to the diverse criteria that need to be considered in the underlying decision-making process. This challenge becomes more complex in joint collaborative management areas (ZIF) because the decision now may involve numerous actors with diverse interests, preferences, and goals. In this research, we present an approach to identifying and quantifying the most relevant criteria that actors consider in a forest management planning process in a ZIF context, including quantifying the performance of seven alternative stand-level forest management models (FMM). Specifically, we developed a combined multicriteria decision analysis and group decision-making process by (a) building a cognitive map with the actors to identify the criteria and sub-criteria; (b) structuring the decision tree; (c) structuring a questionnaire to elicit the importance of criteria and sub-criteria in a pairwise comparison process, and to evaluate the FMM alternatives; and (d) applying a Delphi survey to gather actors’ preferences. We report results from an application to a case study area, ZIF of Vale do Sousa, in North-Western Portugal. Actors assigned the highest importance to the criteria income (56.8% of all actors) and risks (21.6% of all actors) and the lowest to cultural services (27.0% of all actors). Actors agreed on their preferences for the sub-criteria of income (diversification of income sources), risks (wildfires) and cultural services (leisure and recreation activities). However, there was a poor agreement among actors on the sub-criteria of the wood demand and biodiversity criteria. For 27.0% of all actors the FMM with the highest performance was the pedunculate oak and for 43.2% of all actors the eucalypt FMM was the least preferable alternative. The findings indicate that this approach can support ZIF managers in enhancing forest management planning by improving its utility for actors and facilitating its implementation.

Description: Forest sustainable management aims to maintain the income of woody goods for companies, together with preserving non-productive functions as a benefit for the community. Due to the progress in platforms and sensors and the opening of the dedicated market, unmanned aerial vehicle–remote sensing (UAV–RS) is improving its key role in the forestry sector as a tool for sustainable management. The use of UAV (Unmanned Aerial Vehicle) in precision forestry has exponentially increased in recent years, as demonstrated by more than 600 references published from 2018 until mid-2020 that were found in the Web of Science database by searching for “UAV” + “forest”. This result is even more surprising when compared with similar research for “UAV” + “agriculture”, from which emerge about 470 references. This shows how UAV–RS research forestry is gaining increasing popularity. In Part II of this review, analyzing the main findings of the reviewed papers (227), numerous strengths emerge concerning research technical issues. UAV–RS is fully applicated for obtaining accurate information from practical parameters (height, diameter at breast height (DBH), and biomass). Research effectiveness and soundness demonstrate that UAV–RS is now ready to be applied in a real management context. Some critical issues and barriers in transferring research products are also evident, namely, (1) hyperspectral sensors are poorly used, and their novel applications should be based on the capability of acquiring tree spectral signature especially for pest and diseases detection, (2) automatic processes for image analysis are poorly flexible or based on proprietary software at the expense of flexible and open-source tools that can foster researcher activities and support technology transfer among all forestry stakeholders, and (3) a clear lack exist in sensors and platforms interoperability for large-scale applications and for enabling data interoperability.

Description: The purpose of this study was to understand the relationships between stand structure (tree size, volume, biomass, social position, stand density) and the variability of specific leaf area (SLA) at the stand level, which could improve forest management modeling. The study was carried out on 100 trees selected from 10 stands of Scots pine located in northwestern Poland. The stands had been established in a similar way and were similarly managed. Five mid-aged (51–60 years) and five mature (81–90 years) pure Scots pine stands were selected. To obtain the SLA index, we used the direct method, which involves scanning ca. 50 needles from each part of the tree crown. The average SLA was from 4.65 to 6.62 m2·kg−1 and differed significantly according to the part of the crown measured (p 〈 0.0001) and the tree age (p 〈 0.0001). The smallest SLA was in the upper part of the crown and the largest in the lower part of the crown, which is in line with the known relation to the light exposure of needles. Mid-aged stands of Scots pine have higher SLA values than mature ones. Dominant trees in mid-aged stands have a lower SLA than more shaded intermediate ones, which is probably due to the different lighting conditions within the canopy. No clear relationship is observed between the stand density and the SLA.