ALBERT

Description: In light of Egypt's transition to a green economy, this report focuses on reducing greenhouse gas (GHG) emissions and increasing resource efficiency along three different value chains in which small and medium-sized enterprises (SMEs) play a crucial role. In order to support SMEs in Egypt to take advantage of implementing greening options along value chains, more detailed analyses are needed. Therefore, the aim of this study is to analyse three selected supply chains to identify greening opportunities for SMEs. Against this background, the project report is structured as follows: Chapter 2 introduces the background with an overview over the concept of green economy followed by Egypt's economy and its green economy. This is followed by a presentation of the value chains and an overview of the respective sectors. Chapter 3 describes the research approach, methods and data collection. The following chapters examine the three selected value chains cotton, sugar beet and refrigerators, including environmental hot spots, greening options as well as the experts' evaluation of those greening options. The report concludes with key recommendations in Chapter 7.

Description: In order to limit global warming and fulfill their contributions to the Paris agreement, both Germany and Japan have set targets for climate neutrality towards the middle of the century. Reaching these goals will imply transformation of all sectors of society to avoid all fossil greenhouse gas emissions, heavy industry not the least. The focus of this study is the transformation of the petrochemical industry. This sector can become climate neutral but cannot be "decarbonized", as carbon is integral to the chemical structures of the products like polymers and solvents. Reaching climate neutrality thus means that the whole lifecycle of the petrochemical products has to be regarded. Another specific challenge is today's synergetic relation of this industry to fossil transport fuel production, which cannot be maintained in a climate neutral world. The two countries interestingly share a similar industrial structure overall, and the chemical and petrochemical industry is one of the major industries in both countries. The countries' respective chemical industries are the third and fourth largest in the world in terms of sales, but at the same time, these industries represent just over 5% of the respective countries' greenhouse gas emissions. However, these scope 1 emissions of the chemical industry itself are far less relevant than the end-of-life emissions of their products, which belong to scope 3 and are thus not counted under the chemical industry in the country greenhouse gas balances. To mediate these emissions, there is a need to set the direction, draw out paths and investigate possible alternatives for how the petrochemical industry can be become climate neutral. In this report, the existing scenario analyses, energy strategies and roadmaps dealing with this issue in the two countries are compared, as well as the current state of their petrochemical industries. We highlight similarities, differences and identify possible areas of cooperation and exchange in order to find robust paths forward for the transformation of the petrochemical industries.

Description: This dataset reports measurements from a laboratory incubation of soils sourced from a boreal peatland and surrounding habitats (Siikaneva Bog, Finland). In August 2021, soil cores were collected from three habitat zones: a well-drained upland forest, an intermediate margin ecotone, and a Sphagnum moss bog. The cores from each habitat were taken from surface to approximately 50cm below surface using an Eijelkamp peat corer and subdivided by soil horizon. The samples were then incubated anaerobically for 140 days in three temperature treatment groups (0, 4, 20°C). Subsamples of the incubations headspace (250 µL) were measured on a gas chromatograph (7890A, Agilent Technologies, USA) with flame ionization detection (FID) for CO2 and CH4 concentrations. The rate of respiration from the samples were calculated per gram carbon and per gram soil as described in the method of Robertson., et al. (1999) and reported here, along with other relevant parameters.

Description: As the climate crisis is accelerating and the pressure to act is steadily increasing, many companies are claiming themselves or their products carbon neutral. This is usually achieved by offsetting residual emissions with carbon certificates (carbon offsetting). However, recent revelations about the inadequate quality of carbon credits and legal uncertainties surrounding the use of such offset claims are increasingly raising doubts about this approach. This Wuppertal Report examines how the EU can promote integrity in corporate climate action. Taking into account the new framework of the Paris Agreement, the paper outlines various options for how the EU could push for more integrity and effectively combat greenwashing through the targeted use of Article 6 of the Paris Agreement. In their recommendations, the authors advocate addressing the most serious consequences of ongoing offset practices through increased regulation of offset claims. If a ban on offset claims cannot be implemented, claims requirements and carbon offset regulations should be further specified, for example, by prohibiting any type of double counting of emissions reductions. In addition to tightening the rules for corporate offset claims within Europe, the EU could help partner countries make informed decisions when approving climate change mitigation measures and respective carbon credits. The report also emphasizes the EU's special role in international climate negotiations, where it should advocate for a strong legal framework for climate action under Article 6.

Description: The production of green hydrogen in Germany is more competitive than expected compared to imports. This is the key finding of a meta-analysis conducted by the Wuppertal Institute on behalf of the North Rhine-Westphalia Association for Renewable Energies (Landesverband Erneuerbare Energien NRW). The hydrogen study focuses primarily on the year 2030 and beyond - and confirms the advantages of green hydrogen produced in Germany from domestic renewable energies, especially when the evaluation is viewed from a holistic system perspective.

Description: The objectives of the urban mobility transition have been clearly set out: gaining more space for urban living, reducing noise and emissions that have a negative impact on the climate and improving air quality. That means less traffic in cities and more trips made using environmentally-friendly modes of transport - i.e., walking, cycling or foot scooters or public transport. In transport policy, the focus is generally on innovative approaches to shaping the mobility transition. This paper aims to explain the concept of exnovation in the context of the urban mobility transition and to underpin it using specific practical examples. In the course of this process, it is intended to identify the obstacles that stand in the way of rolling out the concept on an area-wide basis in order to deduce strategies and courses of action for expanding the concept in the future.

Description: The food system faces a multitude of challenges, including high greenhouse gas emissions, threats to biodiversity, increased diet-related diseases due to unbalanced diets, and socially problematic complex supply chains. This requires not only a transformation of the agricultural economy but also a change in the diet and lifestyles of all consumers. Developing and using digital and technological innovations can help to solve these challenges. In this context, the study provides impulses on how digitalisation can contribute to transforming production and consumption and which prerequisites have to be given to achieve this. The study describes the approaches for digitalisation along the value chain. These include optimising the use of resources in agriculture - for example with the help of smart farming - and supporting consumers with digital tools and assistance systems - such as apps designed to support grocery shopping. In addition, new business models and a better connection between production and consumption processes are also possible. This includes, for example, new digital sales channels or tracking and communicating sustainability indicators such as CO2 emissions across all steps of the value chain in order to enable all stakeholders to take reliable action.

Description: 22 years are left until the German target for climate neutrality should be reached. For the industrial sector, this implies a fundamental change and an acceleration of emission reduction, as from 2000 to 2021 the sector has reduced its greenhouse gas (GHG) emissions by only 13% (ERK, 2022). For the large structures, plants and assets that are characteristic for the energy intensive industrial sectors, the timespan implies no room for delay. One sector facing particular challenges is the chemical industry. Here, fossil resources are used not only for energetic purposes but for feedstock as well, in the petrochemical industry in particular. The efforts made in the petrochemical sector thereby not only affects the sectors own emissions, but the chemicals value chain at large, including the management of end-of-life products. The dependency on energetic resources for material use also means that there is a particular connection from the chemical industry to the energy system at large, which also entails special consideration. The chemical industry also has a particular relevance to the Antwerp-Rotterdam-Rhine-Ruhr-Area (ARRRA) which hosts several large petrochemical clusters in Germany as well as the Netherlands and Belgium, with complexly interlinked production chains. In reaching the climate targets, these regions especially face significant changes and may have the opportunity to position themselves as frontrunners for industrial transformation. That is, if a successful strategy can be found. In the recent years, numerous scenario analyses and roadmaps have been released drawing out pathways for chemical industries to develop in line with national and international climate targets. This can entail mapping of technological options, important prerequisites, particular challenges as well as important opportunities and timeframes. This meta-analysis summarizes and compares the findings of some of the most recent previous works at the national, European and global level. As the goal is to investigate the various strategic options and development paths for Germany and the ARRRA, it has a particular focus on roadmaps for Germany, the Netherlands and Belgium. It takes a quantitative as well as qualitative approach, looking both at resource and production volumes, different emission reduction strategies relative importance, as well as policy recommendations and other important framework conditions. A particular focus is put on the use of non-fossil feedstocks to reduce emissions.

Description: The adoption of the Paris Agreement in 2015 and the passing of the Climate Action Law in Germany in 2019 established the legal need for the basic material industry in Germany to decarbonise. For the industry sector, the target is sets at a 49-51% GHG reduction by 2030 compared to 1990. Even though the sector specific targets are likely to become obsolete, a Hydrogen Strategy, Industry Strategy and Climate Protection Contracts are currently being developed or elaborated on. These are to further ensure and enable the basic material industry in Germany to decarbonise. These developments are emphasising the relevance of studying the industry decarbonisation at the time of conducting this research. As the institutionalisation of the industry decarbonisation is influenced by discourse, the analysis of the discourse is an important tool for studying the power effects produced by and built into the discourse. This is the first research aiming to provide a structured analysis of the discourse on industry decarbonisation in Germany. Drawing on discourse analysis and the Multilevel-Perspectives framework, this research investigated the power and dominance of storylines to influence the discourse of the industry transformation towards decarbonisation. In this research insights were obtained into the storylines used in this discourse, the actors who are part of this discourse, the frequency of storylines used and the percentage of actors making use of these storylines. Additionally, insights were generated into the discursive network and potential coalitions. This research made use of the Discourse Network Analysis software in combination with Visone and Excel for data collection, analysis, and visualisation. Based on 117 documents of various categories from the years 2012 to 2023, the discourse on German industry decarbonisation is discovered to be dominated by storylines of mainly technological or economic nature. The general sentiment discovered by the different actors is positive with the storylines focusing on establishing the conditions for the industry to decarbonise and no resistance being communicated. The discourse is furthermore dominated by most storylines. 18 out of 27 storylines are being used by more than 56% of all actors. The high overlap in storyline indicates discursive homogeneity. The homogeneity is further indicated through the lack of emerging discourse coalitions and the therewith connected lack of struggles for discursive dominance. One coalition can be defined with some actors being deeper involved and some being less involved in the discourse. As decisions on the transition path for Germany's industry to decarbonise are still to be taken the lack of discursive struggles has come to my surprise. In the discussion I reflect on how the positive sentiment, the discursive homogeneity and the great number of dominant storylines may come about.

Description: The original objectives for introducing Energy Performance Certificates (EPCs) were 1) to make energy performance transparent in the building market, as a measure of energy costs of using a building that a potential buyer or tenant would be interested in; and 2) to encourage energy efficiency renovation. However, the current implementation of EPC schemes in the Member States still shows significant challenges in achieving these two objectives. The recast of the EU Directive on the Overall Energy Performance of Buildings (EPBD) provides a chance to enhance both the usefulness and quality of EPCs and the EPC schemes overall. This document aims to inform both the debate on the recast of the EPBD and the enhancement of national EPC schemes in EU Member States. It presents the draft policy recommendations of the Horizon 2020 QualDeEPC project for making the EPBD and the national schemes more effective, particularly for deep renovation, and enhance their quality overall. The policy recommendations particularly target the link between EPCs and deep (energy) renovation1, while increasing the levels of ambition and convergence across the EU in terms of building renovation. Deep (energy) renovation is crucial for mitigating climate change and for energy security. The EPBD and all of its articles, as well as national EPC schemes, should aim to make deep (energy) renovation the default. This objective would be embedded and ensured in EPC schemes, if the policy recommendations provided in this document were adopted and implemented.

Description: This Wuppertal Paper analyses the energy transition models of Colombia and Germany. The emphasis of the exercise is on an analysis of options for the complete decarbonization of the energy system in Colombia as a Global South country. To this end, it analyses the current situation, projections, public policy and narratives, and contrasts it with Germany as one of the countries of the Global North with which Colombia has historically maintained energy trade relations and is currently collaborating in the exploration of energy alternatives for decarbonization. Detailed analysis of sectoral energy consumption in Colombia shows the sectors with the highest fossil energy consumption (in this order): transport (fuels), industry (gas, coal), electricity generation (gas, coal) and residential (gas). We show the projected increase in demand for fuels and electricity, and calculate the amount of electricity theoretically needed to substitute fossil sources in each sector. We estimate the total electricity required for decarbonization via sector coupling and derive a first estimation of the range of additional renewable energy capacities needed to supply this demand. We find that required capacities are expectedly large (56-110 GW), depending on decarbonization pathways, and that export capacity beyond national demand may be limited. Our analysis of the policy and scenario arena in both countries finds that Colombia is still lacking both sector-specific decarbonization strategies and an embedding in a systemic vision of a systemic energy transition. Germany has more advanced sector strategies and (national) systemic visions, but lacks embedding assumptions on energy imports in a global-system analysis, i.e. in the analysis of an energy transition in potential exporting countries like Colombia. We formulate requirements to close these gaps in our conclusions.

Description: The QualDeEPC project is aiming to both improve quality and cross-EU convergence of Energy Performance Certificate schemes, and the link between EPCs and deep renovation: High-quality Energy Performance Assessment and Certification in Europe Accelerating Deep Energy Renovation. The objective of the project is to improve the practical implementation of the assessment, issuance, design, and use of EPCs as well as their renovation recommendations, in the participating countries and beyond. This report serves as a compilation of the project's proposal for an enhanced and converging EPC assessment and certification scheme. It aims to provide a detailed description on the set of practical concepts, policy proposals, and tools for an enhanced EPC scheme towards deep renovation, developed by the QualDeEPC project. The project's substantial proposals both on EU and national level are presented in a comprehensive and rational way, guiding the relevant stakeholders, in particular the policy makers and competed bodies, on which steps need to be followed so as the proposals to be adapted and how the specific values can be determined in MSs. Furthermore, this report includes the project's proposal for defining "Deep Energy Renovation" based on a modified nZEB-based approach. The project's priorities A) to G) addressed are presented in the following order in this document, reflecting the importance of the enhanced EPC template form and the training of EPC assessors in such schemes: A) Improving the recommendations for renovation, which are provided on the EPCs, towards deep energy renovation; E) High user-friendliness of the EPC, by way of an enhanced EPC template form, including an introduction of the proposed "Energy Rating" indicator; D) Regular mandatory EPC assessor training or examination on assessment and renovation recommendations, required for certification/accreditation and registry; B) Online tool for comparing EPC recommendations to deep energy renovation recommendations; C) Creating Deep Renovation Network Platforms (DRNPs); F) & G) Voluntary/mandatory advertising guidelines for EPCs and Improving compliance with the mandatory use of EPCs in real estate advertisement.

Description: Considering that 40% of the European Union's energy consumption can be traced back to its buildings, it is essential to improve their energy efficiency in order to achieve the EU's energy efficiency targets. Both the rate of energy renovation and its depth, i.e. the amount of energy savings during a renovation, need to be improved. Energy Performance Certificates (EPC), regulated by the EU's Energy Performance of Buildings Directive (EPBD), are an important instrument to enhance the market uptake of energy-efficient new buildings and the energy-efficient renovation of existing buildings. Against this background, the Horizon2020 funded project QualDeEPC will work on EU-wide convergence of the building assessment and the issuance, design, and use of quality-enhanced EPCs as well as their recommendations for building renovation. The aim is to make these recommendations coherent with deep energy renovation towards a nearly-zero energy building stock by 2050. The first part of the QualDeEPC project (work package 2) aims to identify the priorities for elements of EPC schemes that show a need to be improved, and for which the project will investigate further and propose how the elements can be improved. The first step in identifying these priorities is taking stock of the existing EPC schemes. Based on the input from all national consortium partners and other sources, the Wuppertal Institute prepared this detailed overview of the country-specific EPC assessment and certification procedures and their links to other policies and programmes, existing initiatives, and projects. The analysis was based on a list of almost 50 potential options for enhancing the existing EPC schemes. The aim of this deliverable is to present this stock-taking by a detailed analysis on which of the potential enhanced EPC elements are already implemented in which form in which country, covering all 28 countries that were EU member states until 31 January 2020. All partners conducted bilateral interviews with the major actors in the EPC procedures, including executive bodies on EPC at regional and/or national level. For countries not represented in the Consortium, Wuppertal Institut and EAP conducted specific literature research, e.g. from the Concerted Action EPBD, and aimed to obtain contributions from other member states. The information collected allows a detailed presentation on the elements implemented as well as a cross-country comparison matrix (see Annex I) in this report, which outlines the current EPC practices across the EU regarding the elements of a good practice scheme or innovative improvement options, their comparability, compliance with EU legislation, and to which extent they differ or converge. The results show, once more, the high diversity in EPC schemes across the EU. They also provide useful information in at least two directions: 1) which improvement options are not yet implemented at all or in sufficient quality in most QualDeEPC partner countries as well as other EU member states, and could therefore be interesting candidates for the further work of the QualDeEPC project in development, testing, discussion, and possibly implementation of elements for enhanced and converging EPC schemes; and 2) which countries, within or beyond the QualDeEPC project, offer good practice examples for the implementation of these options that could serve to guide the development and implementation in other countries. This deliverable will thus serve as a basis for the upcoming tasks to develop priorities and actual proposals for improvement of EPC schemes.

Description: Established in 2016, the German-Japanese Energy Transition Council (GJETC) strives to promote bilateral cooperation between Germany and Japan on energy transition. Among other studies and topical papers, an output paper in 2020 (Rauschen et al., 2020) already compared the energy efficiency in buildings in both countries with a particular focus on heating and cooling. One important finding of this output paper was that further efforts in the building sector are needed to improve the energy efficiency of buildings in Germany and Japan. Following the more ambitious climate protection targets in both countries, this study seeks to analyze the German and Japanese policies put in place to accelerate the decarbonization of the building sector. The decarbonization of the vast number of buildings that both Japan and Germany are facing will be a major contribution to achieving the GHG reduction targets of both countries and should continue to be discussed among experts and developed into a discussion among policy makers. This report examines and compares the characteristics of the building stock in both countries, as well as existing policies and new strategies and policies that are planned or discussed to achieve energy conservation and decarbonization of buildings. The current shape of buildings, especially houses, is greatly influenced by the land area of the country corresponding to the available space for buildings, the natural environment surrounding the country, the natural resources available, and the lifestyle and cultural ideas that have been passed down and taken root over time. Therefore, it might be difficult to compare them and the corresponding strategies and policies with the same yardstick, so we also discuss common or deviant situations. Through this joint research, we aim to find each other's advantages and challenges and to develop useful and concrete policy recommendations that will contribute to decarbonization policies in both countries.

Description: Presented are analytical data from lacustrine sediment cores, retrieved from Lake Nam Co (Tibetan Plateau). The sediment core is a composite of one gravity core, taken with a Rumohr-Meischner gravity corer (63 mm diameter) and a piston core, retrieved using an uwitec piston coring system (http://www.uwitec.at; 90 mm diameter). The composite core labelled 〈NC 08/01〉 comprises a total length of 10.378 m. The cores were obtained at N 30.737417, E 090.790333 at a water depth of 93 m on 2008-09-15. The purpose of obtaining this sediment core was to establish a high-resolution record of climate (monsoonal) and environmental change using multiple proxy data. The dataset comprises analytical data based on sedimentological, inorganic geochemical, mineralogical and isotope-geochemical methods. Specifically: sediment water content & density; magnetic susceptibility; particel size data; quantitative inorganic geochemical data (ICP-OES aqua regia and HCL digestions); semi-quantitative XRF elemental data; carbon, nitrogen, sulfur contents; qualitative mineralogical data; bulk sediment stable carbon and oxygen isotope data.

Description: This data set is part of a larger data harmonization effort to make lake sediment core data machine readable and comparable. Here we standardized X-ray fluorescence line scanning (XRF)-based element data of sediment core EN18208, retrieved in 2018 from Lake Ilirney (Chukotka, Russia) at 10.76 m water depth. The glacial lake Ilirney is situated in the forest tundra mountain area and has one outflow, one main inflow and several smaller inflows. It lies at an elevation of ca. 428 m a.s.l. with a surface area of ca. 30 km2 and a maximum lake water depth of estimated 44 m. The 10.76 m sediment core was retrieved by a UWITEC piston corer during the RU-Land_2018_Chukotka expedition of the Alfred Wegener Institute Helmholtz Centre for Polar and Marine Research (AWI, Germany, Potsdam) in cooperation with the North Eastern Federal State University (NEFU, Russia, Yakutsk). The downcore elemental composition was measured using an AVAATECH x-ray fluorescence core scanner at Bundesanstalt für Geowissenschaften und Rohstoffe (BGR) in Berlin, Spandau.

Description: This data set is part of a larger data harmonization effort to make lake sediment core data machine readable and comparable. Here we standardized radiocarbon and OSL age data of sediment core EN18208, retrieved in 2018 from Lake Ilirney (Chukotka, Russia) at 10.76 m water depth. The glacial lake Ilirney is situated in the forest tundra mountain area and has one outflow, one main inflow and several smaller inflows. It lies at an elevation of ca. 428 m a.s.l. with a surface area of ca. 30 km2 and a maximum lake water depth of estimated 44 m. The 10.76 m sediment core was retrieved by a UWITEC piston corer during the RU-Land_2018_Chukotka expedition of the Alfred Wegener Institute Helmholtz Centre for Polar and Marine Research (AWI, Germany, Potsdam) in cooperation with the North Eastern Federal State University (NEFU, Russia, Yakutsk). Radiocarbon data have been analysed from bulk sediment samples in Bremerhaven at the MICADAS laboratory. Optically stimulated luminescence (OSL) dating was performed at the Royal Holloway Luminescence Laboratory using a Risø TL/OSL-DA-15 automated dating system.

Description: A 25-cm long predominantly aragonite stalagmite was collected November 2, 2005 from Dharamjali Cave (29.5°N, 80.2°E) in the central Himalayas. This dataset contains stable isotope, trace element, XRF, U/Th dating, and dripwater data. The age model spans 4.2 to 2.3 ka BP, and the dataset records seasonal shifts in hydroclimate from 4.2 to 3.1 ka BP. Using the DHAR-1A half of the speleothem, 750 samples were milled at 100–300 µm resolution for stable isotope analysis (δ18O and δ13C) and analyzed at GFZ Potsdam. Further high-resolution stable isotope analysis at the University of Cambridge included 876 samples from the bottom 4 cm of the mirroring slab DHAR-1B, covering c. 4.2–3.6 ka BP. The δ44/40Ca measurements were made on 60 aragonite samples of aragonite and 1 calcite sample milled between 4.2 and 2.8 ka BP. The elemental composition of DHAR-1B was determined first with an Avaatech XRF scanner at the University of Cambridge, and later using laser ablation inductively-coupled plasma mass spectrometry (LA-ICP-MS) at the University of Waikato. U-series dating was performed at Caltech on 22 samples. Twelve U-series ages (between 2.55 and 4.14 ka BP) were used to construct the age models, using ensembles of 2000 Monte Carlo simulations for each proxy using the MATLAB-based COPRA script (Breitenbach et al., 2012, https://doi.org/10.5194/cp-8-1765-2012).

Description: This data set is part of a larger data harmonization effort to make lake sediment core data machine readable and comparable. Here we standardized grain size element data of sediment core EN18208, retrieved in 2018 from Lake Ilirney (Chukotka, Russia) at 10.76 m water depth. The glacial lake Ilirney is situated in the forest tundra mountain area and has one outflow, one main inflow and several smaller inflows. It lies at an elevation of ca. 428 m a.s.l. with a surface area of ca. 30 km2 and a maximum lake water depth of estimated 44 m. The 10.76 m sediment core was retrieved by a UWITEC piston corer during the RU-Land_2018_Chukotka expedition of the Alfred Wegener Institute Helmholtz Centre for Polar and Marine Research (AWI, Germany, Potsdam) in cooperation with the North Eastern Federal State University (NEFU, Russia, Yakutsk). Grain-size was measured using a Malvern Mastersizer 3000 laser diffraction particle analyser.

Description: This data set is part of a larger data harmonization effort to make lake sediment core data machine readable and comparable. Here we standardized mineral data of sediment core EN18208, retrieved in 2018 from Lake Ilirney (Chukotka, Russia) at 10.76 m water depth. The glacial lake Ilirney is situated in the forest tundra mountain area and has one outflow, one main inflow and several smaller inflows. It lies at an elevation of ca. 428 m a.s.l. with a surface area of ca. 30 km2 and a maximum lake water depth of estimated 44 m. The 10.76 m sediment core was retrieved by a UWITEC piston corer during the RU-Land_2018_Chukotka expedition of the Alfred Wegener Institute Helmholtz Centre for Polar and Marine Research (AWI, Germany, Potsdam) in cooperation with the North Eastern Federal State University (NEFU, Russia, Yakutsk). Bulk mineralogy was analysed by (x-ray diffractometry (XRD) using a (PHILIPS, Netherlands) PW1820 goniometer.

Description: This data set is part of a larger data harmonization effort to make lake sediment core data machine readable and comparable. Here we standardized radiocarbon and OSL age data of sediment core EN18208, retrieved in 2018 from Lake Ilirney (Chukotka, Russia) at 10.76 m water depth. The glacial lake Ilirney is situated in the forest tundra mountain area and has one outflow, one main inflow and several smaller inflows. It lies at an elevation of ca. 428 m a.s.l. with a surface area of ca. 30 km2 and a maximum lake water depth of estimated 44 m. The 10.76 m sediment core was retrieved by a UWITEC piston corer during the RU-Land_2018_Chukotka expedition of the Alfred Wegener Institute Helmholtz Centre for Polar and Marine Research (AWI, Germany, Potsdam) in cooperation with the North Eastern Federal State University (NEFU, Russia, Yakutsk). Water content and organic matter was analysed at AWI Potsdam. Dried and milled samples were analysed using a Vario EL III carbon-nitrogen-sulphur analyser. Organic carbon content was determined using a Vario MAX C analyser.

Description: This dataset contain stable isotope values for water samples collected ~weekly from the Rio Bermejo at the Lavalle bridge (-25.6513, -60.1277) from March 2016 to February 2018. Water samples were filtered to 0.2 micron using a custom filtration device. We measured d2H and d18O on a Picarro L-2140i Cavity Ring-Down Spectrometer at the GFZ Potsdam. Measurements were made in duplicate, normalized to the Vienna Standard Mean Ocean Water (VSMOW), and analytical uncertainty is reported as one standard deviation from the mean. River discharge was measured at the El Colorado gauging station, which is ~100 km down slope from the sampling location.

Description: This dataset provides the geochemistry data for the Holocene sediment sequence retrieved from Lake Uddelermeer (The Netherlands) in 2012. Additionally, alkane concentrations for a set of modern leaf samples are provided. Concentrations of fossil alkanes, GDGTs as well as elemental (C, N, S, H) and compound-specific delta Deuterium measurements are presented against both depth (cm) and age (cal yr. BP). A total of 59 samples were analysed. Modern leaf alkane concentrations are presented as concentrations, 10 samples were analysed. The geochemical data provides information about regional vegetation change as well as changes in effective precipitation. It was produced to inform on the age and duration of major environmental transitions during the middle and late Holocene. Cores were retrieved from the lake using a 3-m long handheld piston corer deployed from a floating coring platform during field work in April and May 2012. Samples were obtained from splits of the core and processed in the laboratory of the University of Amsterdam (the Netherlands) using standard protocols (CNHS, alkane concentrations), the laboratory of Utrecht University (the Netherlands; GDGT concentrations) and at GFZ Potsdam (Germany; delta Deuterium). Name of the Campaign: UDD Event Label: UDD-E Method: Uwitec piston corer Latitude: 52.24652778 Longitude: 5.76097222 Elevation: 24m asl Date/Time of event: 2012-05-01T14:00:00 Further information about event: Lake sediment sequence retrieved using a 60 mm piston corer deployed from a floating platform.

Description: Water samples were filtered to 0.2 micron prior to measurement. Samples for cation analysis were acidified in the field to pH 〈 2 using 6N HNO3. Cation concentrations were measured with a Varian 720 inductively coupled plasma optical emission spectrometer (ICP-OES) at the GFZ Helmholtz Laboratory for the Geochemistry of the Earth Surface (HELGES), using SLRS-5 (Saint-Laurent River Surface, National Research Council - Conseil National de Recherches Canada) and USGS M212 and USGS T187 as external standards. We corrected for instrument drift by measuring an internal standard (GFZ-RW1) every 10 samples and we determined measurement uncertainty using calibration curve uncertainty. Anion concentrations were measured with a Dionex ICS1100 Ion Chromatograph, using USGS standards M206 and M212 as external standards for quality control, with uncertainty determined from triplicate analysis. We corrected cation concentrations for cyclic salt inputs following Bickle et al. (2005, doi:10.1016/j.gca.2004.11.019).

Description: The idea for the Green Recovery Tracker was born in spring 2020 when governments started making announcements on economic Corona recovery measures. From a climate and resilience perspective it is key that those recovery packages, investments and subsidies are in line with long-term climate and sustainability targets. Thus, recovery packages should not only boost the economy in the short-term, but also strike the path to a just transition towards climate neutrality. Against this background, Wuppertal Institute and E3G have launched the Green Recovery Tracker project in late summer 2020 to shed light on the following questions: What can be considered an effective green recovery? What are good examples, which can be used as an inspiration for recovery programs aiming to support sustainable development? Where do the individual Member States stand with respect to aligning their recovery activities with the climate policy agenda? In this report, you will find our Methodology as well our Policy Briefing highlighting our key takeaways of our country and sectoral analyses. It further includes a section on "What can we learn from our experience with the Green Recovery Tracker?". The briefing concludes with a "Guidance for future funding programs and achieving climate targets overall".

Description: Within the Shaping Digitalisation project, we aim to highlight and discuss the opportunities that digitalisation can bring to Germany. In particular, we are discussing three stand-out areas where action is most needed to achieve ecological transformation: mobility, the circular economy, and agriculture and food. This report addresses the second area in need of action. Up until now, discussions on the circular economy have been limited to recycling and the re-use of materials. We must expand the scope of these discussions to include new, resource-efficient business models and the comprehensive transformation of value chains and industrial structures. Our analysis has found that digitalisation is indispensable for this transformation if used properly. We hope this report will provide the impetus needed to kick-start a climate- and resource-friendly industrial transformation in Germany. Here, we have incorporated the findings of our interdisciplinary workshop on "Shaping the Digital-Ecological Industrial Transformation - Business Models and Political Framework Conditions for Climate and Resource Protection" that was attended by experts from international research institutes, civil organizations, public authorities, and private companies.

Description: On the basis of a literature research, this subtask develops a conceptional framework for a common understanding of CE within the project team and for the following work packages and tasks. After a brief introduction into the objectives and the context of a circular economy, a more elaborated look into the necessity of an explicit understanding of CE, the objectives, the spatial perspective of CE and the specific challenges within the CICERONE context will be done, in order to develop a basis for a common understanding within the project context. Circular economy can and has to be understood as an (eco-)innovation agenda. Therefore, the paper investigates the role policy has to play to support innovation for a CE transition, for creating the framework conditions and why CE has also to be build from the ground up. Finally, the paper looks from two perspectives at emerging trends and business models in a CE to sketch next steps towards the transition in a selection of central sectors. Conclusions are drawn on the basis of the insights gained by the preceding chapters.

Description: The key objective of this deliverable is to gain insights on and assess how CE is being implemented and R&I is being funded at regional level, e.g., via the RIS3 strategy and Structural Funds. As such it sets the scope for the project and provides the background against which programmes and measures can be understood, assessed, developed and recommended in succinct tasks and work packages. The objective of this report is to provide a concise overview of the current R&I priorities, as expressed in running and newly introduced funding and legislative measures with respect to Circular Economy in European countries and regions.

Description: A main goal of this study - which also functions as deliverable 210078-D07 of the Circular Economy Beacons (CEB) project - is to evaluate currently available frameworks that measure and operationalise Circular Economy (CE), with a particular focus on the urban context. The regional focus lies on the Western Balkan region, which is at the centre of the project. Such "Urban Circularity Hotspot Frameworks" (UCHF) aim at providing decision support for policy makers, companies, citizens etc. regarding the transition to CE within cities. Based on the analysis of different frameworks, suggestions are derived regarding UCHF suitable for the specific characteristics of Western Balkan municipalities, i.e. a Circular Economy Beacons Urban Circularity Hotspot Framework (CEB-UCHF) ready for short-term implementation.

Description: A sectoral perspective can help the Global Stocktake (GST) to effectively achieve its objective to inform Parties' in enhancing subsequent NDCs and in enhancing international cooperation. Specifically, granular and actionable sectoral lessons, grounded in country-driven assessments, should be identified and elaborated. To be effective, conversations on sectoral transformations need to synthesise key challenges and opportunities identified in the national analyses and link them to international enablers; focus on systemic interdependencies, involve diverse actors, and be thoroughly prepared including by pre-scoping points of convergences and divergence across transformations. We specifically recommend that: the co-facilitators of the Technical Dialogue use their (limited) mandate to facilitate an effective conversationon sectoral transformations e.g. by organising dedicated informal seminars in between formal negotiation sessions; key systemic transformations necessary toachieve net-zero by mid-century should be spelled out and included in the final decision or political declaration of the GST; and the political outcome of the GST should mandate follow-up processes at the regional level and encourage national-level conversations to translate the collective messages from GST into actionable and sector-specific policy recommendations.

Description: This paper analyses the potential of digital information technology to enable the reliable provision of product information along the plastics supply chain. The authors investigate the possible contribution of a product passport equipped with decentralised identifiers and verifiable credentials to overcome information deficits and information asymmetry in the circular plastics economy. Through this, high-quality plastics recycling could be enabled on a larger scale than currently possible.

Description: A large number and variety of activities are being undertaken to introduce Digital Product Passports (DPPs). However, only a few DPPs have made it into practice so far, so there is some uncertainty about which impact DPPs will actually have. With this paper, we aim to provide a structured overview of the current development of DPPs. We provide insights of 76 current corporate, policy, and research activities that exist and their objectives. To allow for a structured assessment and discussion of the diverse approaches we defined 13 criteria for a comparable description, categorization and evaluation. We expect that this overview will not only encourage feedback and contributions from the DPP community, as well as valuable discussions with and among experts. It is also intended to help promote and facilitate the adoption of DPPs for the Circular Economy by facilitating collaborations and suggestions for ongoing activities.

Description: What is necessary to reach net zero emissions in the transport sector on a global level? To keep limiting global warming to 1.5° C within reach, the world has to decarbonise by mid-century, with every sector contributing as much as possible as soon as possible. This paper identifies what has to be done in road transport, aviation, and shipping to achieve net zero emission in the transport sector. For this purpose, it first sets the scene by providing an overview of the origins and impacts of the concept of net zero emissions in international climate policy as well as of the current state and future prospects of global transport emissions using currently available scenarios for low-emission and net zero transport. While for staying below 1.5° C, the basic approach to reducing transport emissions remains unchanged from what has been suggested in the past, the set, intensity and pace of actions as to shift fundamentally. Without first drastically reducing traffic volume and shifting transport demand to low-emission modes, reaching net zero transport will not be feasible: the amount of additional electricity required to fully electrify the sector with renewable energy is otherwise just too huge. After portraying key instruments for achieving net zero emissions in land transport, aviation, and shipping, this paper identifies key barriers for net zero transport. Based on this analysis, the authors recommend the following to be able to move transport to net zero: 1. Adapt Decarbonisation Strategies to Different Transport Sub-sectors 2. Prioritise and Significantly Increase Investment in Zero-/low-carbon Infrastructure 3. Massively Invest in the Development and Roll out of Zero-/low-emission Technologies 4. Focus on a Just Transition to Overcome Social and Political Barriers 5. Increase International Support and Cooperation

Description: This thesis conceptualizes the school as a socio-technical system, in which change towards sustainable development and a transition towards more climate awareness are necessary. The multi-level perspective (MLP) framework is applied to the German school system and to climate protection projects (CPPs) as examples of niche activities integrating climate protection (CP) in the school. The thesis utilizes the analytical levels of the MLP (landscape, regime, and niche) and the concept of regulative, cognitive, and normative rules and addresses the question: How do actors in CPPs perceive drivers and barriers for transitioning towards more climate awareness in the German school system? The data were collected through expert interviews and analyzed by conducting a qualitative content analysis. The results show that the German school system is characterized by an inherent rigidity, deep-set normative role dynamics, and an unappreciated role of schools in society. They also highlight the importance of public pressure, strategic CP orientation, and hands-on approaches. CPPs can be a driving force for this in individual schools, but, overall, CP needs to be addressed more systematically in the school and more substantial efforts and reforms are necessary. Highly motivated niche actors play an important role and represent key drivers for such developments. This thesis reveals the complex and systemic nature of the challenges the German school system is faced with. It highlights the difficulties of integrating CP and the importance of substantial and transformative political action. The thesis demonstrates the crucial need to recognize the significance of schools and their actors for society and to integrate new methods and approaches into the school. This thesis also contributes to the body of literature on socio-technical systems and sustainability transitions. It offers an operationalization of the MLP and reveals strengths and limits as well as future research outlooks.

Description: As the worldwide remaining carbon budget decreases rapidly, countries across the globe are searching for solutions to limit greenhouse gas emissions. As the production and use of coal is among the most carbon-intensive processes, it is foreseeable that coal regions will be particularly affected by the consequences of a transformation towards a climate-neutral economy and energy system. Challenges arise in the area of energy production, environmental protection, but also for economic and social aspects in the transforming regions - often coined with the term "Just Transition". For the decision makers in coal regions, there is an urgent need for support tools that help to kick off measures to diversify the local economies while at the same time supporting the local workers and communities. The Wuppertal Institute aims to support coal regions worldwide by developing a Just Transition Toolbox, which illustrates the challenges and opportunities of a sustainable transition for a global audience. It comprises information about strategy development, sets recommendations for governance structures, fostering sustainable employment, highlights technology options and sheds light on the environmental rehabilitation and repurposing of coal-related sites and infrastructure. The toolbox builds on the work of the Wuppertal Institute for the EU Initiative for Coal Regions in Transition and takes into account country-specific findings from the SPIPA-partner countries India, Indonesia, South Africa, Japan, South Korea, Canada and the USA. The acronym SPIPA is short for "Strategic Partnerships for the Implementation of the Paris Agreement" an EU-BMU programme co-financed by the GIZ.

Description: At the end of March 2022, the European Commission published its new EU Strategy for Sustainable and Circular Textiles. Its ambitious vision is to reduce textile waste, promote circular measures and minimise the negative environmental impacts of the textile industry. But what would a textile industry that keeps textiles in a closed loop look like, and what political conditions would be required in Germany? This Zukunftsimpuls paper by the Wuppertal Institute points to the role that Germany could play in the transformation towards a circular textile industry.

Description: The challenges and also potentials of the energy transition are tremendous in Germany, as well as in Japan. Sometimes, structures of the old energy world need "creative destruction" to clear the way for innovations for a decarbonized, low-risk energy system. In these times of disruptive changes, a constructive and sometimes controversial dialog within leading industrial nation as Japan and Germany over the energy transition is even more important. The German-Japanese Energy Transition Council (GJETC) released a summarizing report for the first project phase 2016-2018. It includes jointly formulated recommendations for politics as well as a controversial dialogue part. The Council jointly states and recommends that: Ambitious long-term targets and strategies for a low-carbon energy system must be defined and ambitiously implemented; Germany and Japan as high technology countries need to take the leadership. Both countries will have to restructure their energy systems substantially until 2050 while maintaining their competitiveness and securing energy supply. Highest priority is given to the forced implementation of efficiency technologies and renewable energies, despite different views on nuclear energy. In both countries all relevant stakeholders - but above all the decision-makers on all levels of energy policy - need to increase their efforts for a successful implementation of the energy transition. Design of the electricity market needs more incentives for flexibility options and for the extensive expansion of variable power generation, alongside with strategies for cost reduction for electricity from photovoltaic and wind energy. The implementation gap of the energy efficiency needs to be closed by an innovative energy policy package to promote the principle of "Energy Efficiency First". Synergies and co-benefits of an enhanced energy and resource efficiency policy need to be realized. Co-existence of central infrastructure and the growing diversity of the activities for decentralization (citizens funding, energy cooperatives, establishment of public utility companies) should be supported. Scientific cooperation can be intensified by a joint working group for scenarios and by the establishment of an academic exchange program.

Description: The German-Japanese Energy Transition Council (GJETC) was established in 2016 by experts from research institutions, energy policy think tanks, and practitioners in Germany and Japan. The objectives and main activities of the Council and the supporting secretariats are to identify and analyze current and future issues regarding policy frameworks, markets, infrastructure, and technological developments in the energy transition, and to hold Council meetings to exchange ideas and propose better policies and strategies. In its second project phase (2018-2020), the GJETC had six members from academia on the Japanese side, and eight members on the German side, with one Co-Chair from each country. From October 2018 to March 2020, the GJETC worked on and debated six topics: 1) Digitalization and the energy transition. 2) Hydrogen society. 3) Review of German and Japanese long-term energy scenarios and their evaluation mechanism. 4) Buildings, energy efficiency, heating/cooling. 5) Integration costs of renewable energies. 6) Transport and sector coupling. The outputs and the recommendations of the second phase of the GJETC are summarized in this report.

Description: The sales of pedelecs are currently skyrocketing in Germany and in many other places. As a low-carbon means of mobility, pedelecs have the potential to make a substantial contribution to the mobility transition. This thesis employs practice theory as proposed by Shove et al. (2012) to investigate this quickly evolving phenomenon. The analysis is based on interviews with e-bike commuters which were investigated using template analysis and exploratory memos. To obtain a broad picture the practice, a maximum variance sampling strategy was carried out in two cities that vary substantially with regard to velomobility: Wuppertal and Münster. This thesis one hand presents the first encompassing account on the practice elements which commuting by pedelec is composed of. It hence contributes to the debate about the depiction of practices. Furthermore, the thesis finds that pedelec commuting should be conceptualized as a variant of velomobility and not as a variant of motoring or as an independent practice. Yet, the elements integrated in pedelec-commuting are found to clearly differ from those of cycling, so that pedelec-commuting meets the requirements of everyday life much better than commuting on non-electrified bikes. The findings of this thesis suggest several pathways to strengthening this novel practice. The capacity of e-biking to serve mundane trips can for example be supported through the normalization of the use of weather- and transport relevant materials and competences. Deeper linkages with interacting practices from other sectors, such as an integration of cycling materials (GPS-trackers) into policing practices, can also con-tribute to this goal. With regard to research, the present work offers starting points for quantifications, for example on the relative importance of single elements as well as on the characteristics of their relations among each other or with regard to typical constellations of elements.

Description: The transport sector accounts for 20 per cent of the greenhouse gas emissions in Germany and it is therefore key to success for German climate policy. At present, however, there is no other sector with a wider gap in missing the trajectory to climate neutrality. The present study, conducted on behalf of Huawei within the project "Shaping the Digital Transformation - Digital Solution Systems for the Sustainability Transition", points out new pathways towards a sustainable and climate friendly transition of the transport sector. The report specifies concrete options to follow up on the ambitious goals of the new coalition agreement to foster clean and digital mobility solutions. The authors refined eight theses on how digitalisation can foster sustainable mobility solutions and how to shape a supporting policy framework, which is aligning the financial and regulatory guardrails for ramping up a sustainable mobility system while gradually phasing down the usage of private cars.

Description: In the coming years, we must set a course that will allow as to protect our climate, reduce resource consumption, and preserve biodiversity. A profound ecological system change is on the horizon in all central areas of action of the economy and society, or transformation arenas. Digitalisation is a prerequisite for the success in this change and will impact these arenas at multiple levels: Digital technologies and applications will make it possible to improve current procedures, processes, and structures (Improve) and help us take the first steps towards new business models and frameworks (Convert). Despite this, digitalisation itself must be effective enough to facilitate a complete ecological restructuring of our society and lives to achieve more far-reaching economic transformation and value creation (Transform). The ability to obtain, link, and use data is a basic prerequisite for tapping into the potential of digitisation for sustainability transformation. However, data is not a homogeneous raw material. Data only gains value when we know the context in which it was collected and when we can use it for a specific purpose. The discussion on what structures and prerequisites are necessary for the system-changing use of data has only just begun. This study was conducted to serve as a starting point for this discussion as it describes the opportunities and prerequisites for a data-based sustainability transformation. This study focuses on environmental data, data from plants, machines, infrastructure, and IoT products. Our task will be to increase the use this data for systemic solutions (system innovation) within transformation arenas where different stakeholders are working together to initiate infrastructure, value chain, and business model transformation.

Description: The project "Plastic Credits - Financing the Transition to the Global Circular Economy" supports the implementation of a waste management structure in India's rural regions. By that it aims to improve the current waste collection and treatment structures in the pilot regions Goa, Maharashtra, and Kerala. Herein, the project focuses on low value plastics (LVP), and especially multi-layer plastics (MLP), that have no market value. In order to analyze the environmental impacts of the project, an Environmental Impact Assessment (EIA) was conducted. The considered environmental components comprise: greenhouse gas emissions, usage of primary resources, impacts on marine and terrestrial wildlife, standard of living, and economic costs.

Description: Despite the importance of surface energy budgets (SEBs) for land-climate interactions in the Arctic, uncertainties in their prediction persist. In situ observational data of SEB components - useful for research and model validation - are collected at relatively few sites across the terrestrial Arctic, and not all available datasets are readily interoperable. Furthermore, the terrestrial Arctic consists of a diversity of vegetation types, which are generally not well represented in land surface schemes of current Earth system models. This dataset describes the data generated in a literature synthesis, covering 358 study sites on vegetation or glacier (〉=60°N latitude), which contained surface energy budget observations. The literature synthesis comprised 148 publications searched on the ISI Web of Science Core Collection.

Description: The rewetting of peatlands is a promising measure to mitigate greenhouse gas (GHG) emissions by preventing the further mineralization of the peat soil through aeration. In coastal peatland, the rewetting with brackish water can increase the GHG mitigation potential by the introduction of sulfate, a terminal electron acceptor (TEA). Sulfate is known to lower the CH4 production and thus, its emission by favoring the growth of sulfate-reducers, which outcompete methanogens for substrate. The data contain porewater variables such as pH, electrical conductivity (EC) and sulfate, chloride, dissolved CO2 and CH4 concentrations, as well as absolute abundances of methane- and sulfate-cycling microbial communities. The data were collected in spring and autumn 2019 after a storm surge with brackish water inflow in January 2019. Field sampling was conducted in the nature reserve Heiligensee and Hütelmoor in North-East Germany, close to the Southern Baltic Sea coast. We took peat cores using a Russian peat corer in addition to pore water diffusion samplers and plastic liners (length: 60cm; inner diameter 10 cm) at four locations along a transect from further inland towards the Baltic Sea. We wanted to compare the soil and pore water geochemistry as well as the microbial communities after the brackish water inflow to the common freshwater rewetting state. Pore water was extracted using pore water suction samplers in the lab and environmental variables were quantified with an ICP. Microbial samples were sampled from the peat core using sterile equipment. We used quantitative polymerase chain reaction (qPCR) to characterize pools of DNA and cDNA targeting total and putatively active bacteria and archaea. qPCR was performed on key functional genes of methane production (mcrA), aerobic methane oxidation (pmoA) and sulfate reduction (dsrB) in addition to the 16S rRNA gene for the absolute abundance of total prokaryotes. Furthermore, we retrieved soil plugs to determine the concentrations and isotopic signatures of dissolved trace gases (CO2/DIC and CH4) in the pore water.

Description: This dataset provides annually resolved microfacies data from ICDP core 5017-1-A, retrieved from the deep northern Dead Sea basin in 2010/11, for the last glacial-interglacial transition (ca. 14-13 ka BP). Sediments of the Lisan Formation were investigated between ~94.7 and 91.8 m sediment depth below lake floor (lithozone C2) by continuous thin section microscopy. Thin sections were prepared following the standard procedure by Brauer and Casanova (2001) that was adjusted for salty sediments. Thin section analyses were performed on overlapping large-scale thin sections using a Zeiss Axiolab pol microscope at magnifications of 50-400x. Microfacies analyses included varve counting and measurements of varve and sublayer thickness. The amount of varves in erosional gaps was interpolated and the position of mass flow deposits (MFD) is marked.

Description: We present sea ice temperature and salinity data from first-year ice (FYI) and second-year ice (SYI) relevant to the temporal development of sea ice permeability and brine drainage efficiency from the early growth phase in October 2019 to the onset of spring warming in May 2020. Our dataset was collected in the central Arctic Ocean during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) Expedition in 2019 to 2020. MOSAiC was an international transpolar drift expedition in which the German icebreaker RV Polarstern anchored into an ice floe to gain new insights into Arctic climate over a full annual cycle. In October 2019, RV Polarstern moored to an ice floe in the Siberian sector of the Arctic at 85 degrees north and 137 degrees east to begin the drift towards the North Pole and the Fram Strait via the Transpolar Drift Stream. The data presented here were collected during the first three legs of the expedition, so all the coring activities took place on the same floe. The end dates of legs 1, 2, and 3 were 13 December, 24 February, and 4 June, respectively. The dataset contributed to a baseline study entitled, Deciphering the properties of different Arctic ice types during the growth phase of the MOSAiC floes: Implications for future studies. The study highlights downward directed gas pathways in FYI and SYI by inferring sea ice permeability and potential brine release from several time series of temperature and salinity measurements. The physical properties presented in this paper lay the foundation for subsequent analyses on actual gas contents measured in the ice cores, as well as air-ice and ice-ocean gas fluxes. Sea ice cores were collected with a Kovacs Mark II 9 cm diameter corer. To measure ice temperatures, about 4.5 cm deep holes were drilled into the core (intervals varied by site and leg) . The temperatures were measured by a digital thermometer within minutes after the cores were retrieved. The ice cores were placed into pre-labelled plastic sleeves sealed at the bottom end. The ice cores were transported to RV Polarstern and stored in a -20 degrees Celsius freezer. Each of the cores was sub-sampled, melted at room temperature, and processed for salinity within one or two days. The practical salinity was estimated by measuring the electrical conductivity and temperature of the melted samples using a WTW Cond 3151 salinometer equipped with a Tetra-Con 325 four-electrode conductivity cell. The practical salinity represents the the salinity estimated from the electrical conductivity of the solution. The dataset also contains derived variables, including sea ice density, brine volume fraction, and the Rayleigh number.

Description: Organic carbon (OC) stored in Arctic permafrost represents one of Earth’s largest and most vulnerable terrestrial carbon pools. Amplified climate warming across the Arctic results in widespread permafrost thaw. Permafrost deposits exposed at river cliffs and coasts are particularly susceptible to thawing processes. Accelerating erosion of terrestrial permafrost along shorelines leads to increased transfer of organic matter (OM) to nearshore waters. However, the amount of terrestrial permafrost carbon and nitrogen as well as the OM quality in these deposits are still poorly quantified. Here, we characterise the sources and the quality of OM supplied to the Lena River at a rapidly eroding permafrost river shoreline cliff in the eastern part of the delta (Sobo-Sise Island). Our multi-proxy approach captures bulk elemental, molecular geochemical and carbon isotopic analyses of late Pleistocene Yedoma permafrost and Holocene cover deposits, discontinuously spanning the last ~52 ka. We show that the ancient permafrost exposed in the Sobo-Sise cliff has a high organic carbon content (mean of about 5 wt%).We found that the OM quality, which we define as the intrinsic potential to further transformation, decomposition, and mineralization, is also high as inferred by the lipid biomarker inventory. The oldest sediments stem from Marine Isotope Stage (MIS) 3 interstadial deposits (dated to 52 to 28 cal kyr BP) and is overlaid by Last Glacial MIS 2 (dated to 28 to 15 cal ka BP) and Holocene MIS 1 (dated to 7–0 cal ka BP) deposits. The relatively high average chain length (ACL) index of n-alkanes along the cliff profile indicates a predominant contribution of vascular plants to the OM composition. The elevated ratio of iso and anteiso-branched FAs relative to long chain (C ≥ 20) n-FAs in the interstadial MIS 3 and the interglacial MIS 1 deposits, suggests stronger microbial activity and consequently higher input of bacterial biomass during these climatically warmer periods. The overall high carbon preference index (CPI) and higher plant fatty acid (HPFA) values as well as high C / N ratios point to a good quality of the preserved OM and thus to a high potential of the OM for decomposition upon thaw. A decrease of HPFA values downwards along the profile probably indicates a relatively stronger OM decomposition in the oldest (MIS 3) deposits of the cliff.

Description: We present sea ice temperature and salinity data from first-year ice (FYI) and second-year ice (SYI) relevant to the temporal development of sea ice permeability and brine drainage efficiency from the early growth phase in October 2019 to the onset of spring warming in May 2020. Our dataset was collected in the central Arctic Ocean during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) Expedition in 2019 to 2020. MOSAiC was an international transpolar drift expedition in which the German icebreaker RV Polarstern anchored into an ice floe to gain new insights into Arctic climate over a full annual cycle. In October 2019, RV Polarstern moored to an ice floe in the Siberian sector of the Arctic at 85 degrees north and 137 degrees east to begin the drift towards the North Pole and the Fram Strait via the Transpolar Drift Stream. The data presented here were collected during the first three legs of the expedition, so all the coring activities took place on the same floe. The end dates of legs 1, 2, and 3 were 13 December, 24 February, and 4 June, respectively. The dataset contributed to a baseline study entitled, Deciphering the properties of different Arctic ice types during the growth phase of the MOSAiC floes: Implications for future studies. The study highlights downward directed gas pathways in FYI and SYI by inferring sea ice permeability and potential brine release from several time series of temperature and salinity measurements. The physical properties presented in this paper lay the foundation for subsequent analyses on actual gas contents measured in the ice cores, as well as air-ice and ice-ocean gas fluxes. Sea ice cores were collected with a Kovacs Mark II 9 cm diameter corer. To measure ice temperatures, about 4.5 cm deep holes were drilled into the core (intervals varied by site and leg) . The temperatures were measured by a digital thermometer within minutes after the cores were retrieved. The ice cores were placed into pre-labelled plastic sleeves sealed at the bottom end. The ice cores were transported to RV Polarstern and stored in a -20 degrees Celsius freezer. Each of the cores was sub-sampled, melted at room temperature, and processed for salinity within one or two days. The practical salinity was estimated by measuring the electrical conductivity and temperature of the melted samples using a WTW Cond 3151 salinometer equipped with a Tetra-Con 325 four-electrode conductivity cell. The practical salinity represents the the salinity estimated from the electrical conductivity of the solution. The dataset also contains derived variables, including sea ice density, brine volume fraction, and the Rayleigh number.

Description: These datasets describe sediment samples taken from the Batagay megaslump, located in Yana Uplands in northeastern Siberia. Most sediment samples were taken from the slump headwall (B19-P1) by rapelling down on a rope from the slump surface and taking samples with a hole saw (diameter 55 mm, 40 mm deep) mounted on a handheld power drill. A second profile (B19-02) of the lowest part of the slump headwall was sampled (~100 m south) using a hammer and axe from the slump floor. Two permafrost sediment blocks (B19-03 and B19-04) at the slump bottom that had fallen from the headwall were sampled using a chainsaw. Finally, a baidzherakh (thermokarst mound; B19-05) in the north of the slump was sampled using a hammer and axe. The samples cover 5 stratigraphical units: 1. lower ice complex, 2. lower sand unit, 3. woody layer, 4. upper ice complex, 5. Holocene cover.

Description: Organic carbon (OC) stored in Arctic permafrost represents one of Earth’s largest and most vulnerable terrestrial carbon pools. Amplified climate warming across the Arctic results in widespread permafrost thaw. Permafrost deposits exposed at river cliffs and coasts are particularly susceptible to thawing processes. Accelerating erosion of terrestrial permafrost along shorelines leads to increased transfer of organic matter (OM) to nearshore waters. However, the amount of terrestrial permafrost carbon and nitrogen as well as the OM quality in these deposits are still poorly quantified. Here, we characterise the sources and the quality of OM supplied to the Lena River at a rapidly eroding permafrost river shoreline cliff in the eastern part of the delta (Sobo-Sise Island). Our multi-proxy approach captures bulk elemental, molecular geochemical and carbon isotopic analyses of late Pleistocene Yedoma permafrost and Holocene cover deposits, discontinuously spanning the last ~52 ka. We show that the ancient permafrost exposed in the Sobo-Sise cliff has a high organic carbon content (mean of about 5 wt%).We found that the OM quality, which we define as the intrinsic potential to further transformation, decomposition, and mineralization, is also high as inferred by the lipid biomarker inventory. The oldest sediments stem from Marine Isotope Stage (MIS) 3 interstadial deposits (dated to 52 to 28 cal kyr BP) and is overlaid by Last Glacial MIS 2 (dated to 28 to 15 cal ka BP) and Holocene MIS 1 (dated to 7–0 cal ka BP) deposits. The relatively high average chain length (ACL) index of n-alkanes along the cliff profile indicates a predominant contribution of vascular plants to the OM composition. The elevated ratio of iso and anteiso-branched FAs relative to long chain (C ≥ 20) n-FAs in the interstadial MIS 3 and the interglacial MIS 1 deposits, suggests stronger microbial activity and consequently higher input of bacterial biomass during these climatically warmer periods. The overall high carbon preference index (CPI) and higher plant fatty acid (HPFA) values as well as high C / N ratios point to a good quality of the preserved OM and thus to a high potential of the OM for decomposition upon thaw. A decrease of HPFA values downwards along the profile probably indicates a relatively stronger OM decomposition in the oldest (MIS 3) deposits of the cliff.

Description: We present sea ice temperature and salinity data from first-year ice (FYI) and second-year ice (SYI) relevant to the temporal development of sea ice permeability and brine drainage efficiency from the early growth phase in October 2019 to the onset of spring warming in May 2020. Our dataset was collected in the central Arctic Ocean during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) Expedition in 2019 to 2020. MOSAiC was an international transpolar drift expedition in which the German icebreaker RV Polarstern anchored into an ice floe to gain new insights into Arctic climate over a full annual cycle. In October 2019, RV Polarstern moored to an ice floe in the Siberian sector of the Arctic at 85 degrees north and 137 degrees east to begin the drift towards the North Pole and the Fram Strait via the Transpolar Drift Stream. The data presented here were collected during the first three legs of the expedition, so all the coring activities took place on the same floe. The end dates of legs 1, 2, and 3 were 13 December, 24 February, and 4 June, respectively. The dataset contributed to a baseline study entitled, Deciphering the properties of different Arctic ice types during the growth phase of the MOSAiC floes: Implications for future studies. The study highlights downward directed gas pathways in FYI and SYI by inferring sea ice permeability and potential brine release from several time series of temperature and salinity measurements. The physical properties presented in this paper lay the foundation for subsequent analyses on actual gas contents measured in the ice cores, as well as air-ice and ice-ocean gas fluxes. Sea ice cores were collected with a Kovacs Mark II 9 cm diameter corer. To measure ice temperatures, about 4.5 cm deep holes were drilled into the core (intervals varied by site and leg) . The temperatures were measured by a digital thermometer within minutes after the cores were retrieved. The ice cores were placed into pre-labelled plastic sleeves sealed at the bottom end. The ice cores were transported to RV Polarstern and stored in a -20 degrees Celsius freezer. Each of the cores was sub-sampled, melted at room temperature, and processed for salinity within one or two days. The practical salinity was estimated by measuring the electrical conductivity and temperature of the melted samples using a WTW Cond 3151 salinometer equipped with a Tetra-Con 325 four-electrode conductivity cell. The practical salinity represents the the salinity estimated from the electrical conductivity of the solution. The dataset also contains derived variables, including sea ice density, brine volume fraction, and the Rayleigh number.

Description: Rock magnetic and paleomagnetic results covering the past 30 ka were constructed from two sediment cores MSM33_856-1 (MSM33-55-1) and MSM33_855-1 (54-3) from the Black Sea. After the Mediterranean Sea water ingression, finely laminated organic-rich sapropelic sediments and coccolith oozes were deposited in the Black Sea since about 8.3 ka. Relict magnetic minerals in the Black Sea sarpoples are ferrous hemoilmenite, Fe-Mn and Fe-Cr spinels, and magnetite inclusions. In sediments deposited between about 14 and 8 ka, greigite and pyrite were formed in sediments because of the seawater penetration from overlying sediments after the seawater ingression. Before ~14 ka, the Black Sea sediments are dominated by detrital (titano-)magnetite minerals and the sporadically formed greigite which has SIRM/kLF ratios 〉 10 kAm-2. By comparison with detrital (titano-)magnetite samples between 20-30 ka, we found that relict magnetic mineral samples between 0-8.3 ka have similar behavior in recording the geomagnetic field. Moreover, the geomagnetic field variations reconstructed from the Black Sea sapropels are comparable with other validated regional datasets for the past 8.3 ka. The natural remanent magnetization (NRM) and the anhysteretic remanent magnetization (ARM) were measured with a 2G Enterprises 755 SRM (cryogenic) long-core magnetometer equipped with a sample holder for eight discrete samples at a separation of 20 cm. The magnetometer's in-line tri-axial alternating field (AF) demagnetizer was used to demagnetize the NRM and ARM of the samples. The NRM was measured after application of AF peak amplitudes of 0, 5, 10, 15, 20, 30, 40, 50, 65, 80, and 100 mT. Directions of the characteristic remanent magnetization (ChRM) were determined by principle component analysis (PCA) according to Kirschvink (1980). The error range of the ChRM is given as the maximum angular deviation (MAD). The ARM was imparted along the samples' z-axis with a static field of 0.05 mT and an AF field of 100 mT. Demagnetization then was performed in steps of 0, 10, 20, 30, 40, 50, 65, and 80 mT. The median destructive field of the ARM (MDFARM) was determined to estimate the coercivity of the sediments. The slope of NRM versus ARM of common demagnetization steps was used to determine the relative paleointensity (RPI). In most cases, demagnetization steps from 20 to 65 mT were used to determine the RPI.

Description: This dataset provides data for four third-degree tidal constituents used in the publication of Sulzbach et al (2022). The tidal constituents provided are the 3M1, 3M3, 3N2 and 3L2 for 134 globally distributed stations. The tide information, such as the nodal modulations of these tides, are taken from Table 1 and Table S2 of Ray (2020). These tidal constants are estimated using the GESLA dataset (Woodworth et al 2014) following the approach presented in Piccioni et al (2019). This record is an add-on to the full TICON dataset (https://doi.org/10.1594/PANGAEA.896587), using exactly the same data format and pre-processing. These steps include using tide gauge data that contains at least ten years of continuous data. Further, the dataset is restricted to only contain open ocean tide gauges by limiting it to a mean surrounding depth of tide gauges to be deeper than 500 meters in a 2-degree radius and excluding stations not native to the ocean domain of the employed tidal model TiME. Duplicate and closely neighbouring tide gauges, found within a 0.2-degree radius, are also removed from the dataset. This resulted in the availability of the four tidal constants for 134 tide gauges. The results are stored in one tab-separated text/ASCII file with 13 columns: 1. Latitude of the tide gauge station 2. Longitude of the tide gauge station 3. Constituent name 4. Amplitude (in cm) 5. Phase (in degrees) 6. Standard deviation of the amplitude (in cm) 7. Standard deviation of the phase (in degrees) 8. Percentage of missing observations 9. Total number of observations analyzed 10. Length of the maximum temporal gap found in the time series in days 11. Date of the first observation 12. Date of the last observation 13. Code that corresponds to the original source of the record TICON is a useful and easy-to-handle data set for tide model validation and allows the users to select the records according to the different criteria most suitable for their purposes. The options span from the choice of a geographical region to the use of single constituents or time periods.

Description: These datasets provide sedimentological data partly at annual resolution and an age model for the lateglacial part of (1) the ICDP sediment core 5017-1-A retrieved from the deep northern Dead Sea basin in 2010/11, and (2) for the Masada outcrop located at the southwestern shore of the Dead Sea sampled in 2018. The here investigated two sediment sections cover the last glacial-interglacial transition (ca. 17-11.5 ka BP) in the hydroclimatically sensitive Levant, when the water level of Lake Lisan – the precursor of the Dead Sea – dropped dramatically from its glacial high-stand to the Holocene low levels. Here, we analyze the interval between the last two gypsum units – the Upper Gypsum Unit (UGU) and the Additional Gypsum Unit (AGU) – which were also used to correlate the two sites. In the ICDP core this section is located between ~101 and 88.5 m sediment depth below lake floor and at Masada it encompasses the uppermost ~3.8 m sediments of the Lisan Formation, which form the terminal deposit at this site. Due to the lake level decline, the complete transition into the Holocene is only recorded in the ICDP core, while sedimentation at Masada terminates earlier. The microfacies was investigated by continuous thin section microscopy, while additional macroscopic information is provided from over- and underlying sediment sections. A revised chronology using age modelling in OxCal (Ramsey 2008; Ramsey 2009; Ramsey and Lee 2013) was developed for the ICDP core and a floating varve chronology was constructed at Masada. Using these new microfacies data from marginal (Masada) and deep-water (ICDP core) sediments, the hydroclimatic variability during the final stage of Lake Lisan can be reconstructed, which could provide important insights into the development of human sedentism in the region at this time.

Description: We present sea ice temperature and salinity data from first-year ice (FYI) and second-year ice (SYI) relevant to the temporal development of sea ice permeability and brine drainage efficiency from the early growth phase in October 2019 to the onset of spring warming in May 2020. Our dataset was collected in the central Arctic Ocean during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) Expedition in 2019 to 2020. MOSAiC was an international transpolar drift expedition in which the German icebreaker RV Polarstern anchored into an ice floe to gain new insights into Arctic climate over a full annual cycle. In October 2019, RV Polarstern moored to an ice floe in the Siberian sector of the Arctic at 85 degrees north and 137 degrees east to begin the drift towards the North Pole and the Fram Strait via the Transpolar Drift Stream. The data presented here were collected during the first three legs of the expedition, so all the coring activities took place on the same floe. The end dates of legs 1, 2, and 3 were 13 December, 24 February, and 4 June, respectively. The dataset contributed to a baseline study entitled, Deciphering the properties of different Arctic ice types during the growth phase of the MOSAiC floes: Implications for future studies. The study highlights downward directed gas pathways in FYI and SYI by inferring sea ice permeability and potential brine release from several time series of temperature and salinity measurements. The physical properties presented in this paper lay the foundation for subsequent analyses on actual gas contents measured in the ice cores, as well as air-ice and ice-ocean gas fluxes. Sea ice cores were collected with a Kovacs Mark II 9 cm diameter corer. To measure ice temperatures, about 4.5 cm deep holes were drilled into the core (intervals varied by site and leg) . The temperatures were measured by a digital thermometer within minutes after the cores were retrieved. The ice cores were placed into pre-labelled plastic sleeves sealed at the bottom end. The ice cores were transported to RV Polarstern and stored in a -20 degrees Celsius freezer. Each of the cores was sub-sampled, melted at room temperature, and processed for salinity within one or two days. The practical salinity was estimated by measuring the electrical conductivity and temperature of the melted samples using a WTW Cond 3151 salinometer equipped with a Tetra-Con 325 four-electrode conductivity cell. The practical salinity represents the the salinity estimated from the electrical conductivity of the solution. The dataset also contains derived variables, including sea ice density, brine volume fraction, and the Rayleigh number.

Description: This dataset provides annually resolved microfacies data from ICDP core 5017-1-A, retrieved from the deep northern Dead Sea basin in 2010/11, for the last glacial-interglacial transition (ca. 17-11.5 ka BP). Sediments of the Lisan Formation were investigated between ~101 and 88.5 m sediment depth below lake floor by continuous thin section microscopy, while additional macroscopic information is provided from core catchers, as well as from over- and underlying sediment sections. Thin sections were prepared following the standard procedure by Brauer and Casanova (2001) that was adjusted for salty sediments. Thin section analyses were performed on overlapping large-scale thin sections using a Zeiss Axiolab pol microscope at magnifications of 50-400x. Microfacies analyses included varve counting and measurements of varve and sublayer thickness.

Description: Despite the importance of surface energy budgets (SEBs) for land-climate interactions in the Arctic, uncertainties in their prediction persist. In situ observational data of SEB components - useful for research and model validation - are collected at relatively few sites across the terrestrial Arctic, and not all available datasets are readily interoperable. Furthermore, the terrestrial Arctic consists of a diversity of vegetation types, which are generally not well represented in land surface schemes of current Earth system models. This dataset contains metadata information about surface energy budget components measured at 64 tundra and glacier sites 〉60° N across the Arctic. This information was taken from the open-access repositories FLUXNET, Ameriflux, AON, GC-Net and PROMICE. The contained datasets are associated with the publication vegetation type as an important predictor of the Arctic Summer Land Surface Energy Budget by Oehri et al. 2022, and intended to support research of surface energy budgets and their relationship with environmental conditions, in particular vegetation characteristics across the terrestrial Arctic.

Description: This dataset provides the results from Bayesian age depth modelling in OxCal for ICDP core 5017-1-A, retrieved from the deep northern Dead Sea basin in 2010/11, for the last glacial-interglacial transition between ~101 and 88.5 m sediment depth below lake floor (ca. 17-11.5 ka BP). The model was performed in OxCal v.4.4 using a P_Sequence (1,1,C(-2,2)) (Ramsey 2008; Ramsey 2009; Ramsey and Lee 2013) and includes three tephrochronological ages from Neugebauer et al. (2021) and three radiocarbon ages from Kitagawa et al. (2017).

Description: Despite the importance of surface energy budgets (SEBs) for land-climate interactions in the Arctic, uncertainties in their prediction persist. In situ observational data of SEB components - useful for research and model validation - are collected at relatively few sites across the terrestrial Arctic, and not all available datasets are readily interoperable. Furthermore, the terrestrial Arctic consists of a diversity of vegetation types, which are generally not well represented in land surface schemes of current Earth system models. This dataset comprises harmonized, standardized and aggregated in-situ observations of surface energy budget components measured at 64 sites on vegetated and glaciated sites north of 60° latitude, in the time period from 1994 till 2021. The surface energy budget components include net radiation, sensible heat flux, latent heat flux, ground heat flux, net shortwave radiation, net longwave radiation, surface temperature and albedo, which were aggregated to daily mean, minimum and maximum values from hourly and half-hourly measurements. Data were retrieved from the monitoring networks FLUXNET, AmeriFlux, AON, GC-Net and PROMICE.

Description: We present sea ice temperature and salinity data from first-year ice (FYI) and second-year ice (SYI) relevant to the temporal development of sea ice permeability and brine drainage efficiency from the early growth phase in October 2019 to the onset of spring warming in May 2020. Our dataset was collected in the central Arctic Ocean during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) Expedition in 2019 to 2020. MOSAiC was an international transpolar drift expedition in which the German icebreaker RV Polarstern anchored into an ice floe to gain new insights into Arctic climate over a full annual cycle. In October 2019, RV Polarstern moored to an ice floe in the Siberian sector of the Arctic at 85 degrees north and 137 degrees east to begin the drift towards the North Pole and the Fram Strait via the Transpolar Drift Stream. The data presented here were collected during the first three legs of the expedition, so all the coring activities took place on the same floe. The end dates of legs 1, 2, and 3 were 13 December, 24 February, and 4 June, respectively. The dataset contributed to a baseline study entitled, Deciphering the properties of different Arctic ice types during the growth phase of the MOSAiC floes: Implications for future studies. The study highlights downward directed gas pathways in FYI and SYI by inferring sea ice permeability and potential brine release from several time series of temperature and salinity measurements. The physical properties presented in this paper lay the foundation for subsequent analyses on actual gas contents measured in the ice cores, as well as air-ice and ice-ocean gas fluxes. Sea ice cores were collected with a Kovacs Mark II 9 cm diameter corer. To measure ice temperatures, about 4.5 cm deep holes were drilled into the core (intervals varied by site and leg) . The temperatures were measured by a digital thermometer within minutes after the cores were retrieved. The ice cores were placed into pre-labelled plastic sleeves sealed at the bottom end. The ice cores were transported to RV Polarstern and stored in a -20 degrees Celsius freezer. Each of the cores was sub-sampled, melted at room temperature, and processed for salinity within one or two days. The practical salinity was estimated by measuring the electrical conductivity and temperature of the melted samples using a WTW Cond 3151 salinometer equipped with a Tetra-Con 325 four-electrode conductivity cell. The practical salinity represents the the salinity estimated from the electrical conductivity of the solution. The dataset also contains derived variables, including sea ice density, brine volume fraction, and the Rayleigh number.

Description: We present sea ice temperature and salinity data from first-year ice (FYI) and second-year ice (SYI) relevant to the temporal development of sea ice permeability and brine drainage efficiency from the early growth phase in October 2019 to the onset of spring warming in May 2020. Our dataset was collected in the central Arctic Ocean during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) Expedition in 2019 to 2020. MOSAiC was an international transpolar drift expedition in which the German icebreaker RV Polarstern anchored into an ice floe to gain new insights into Arctic climate over a full annual cycle. In October 2019, RV Polarstern moored to an ice floe in the Siberian sector of the Arctic at 85 degrees north and 137 degrees east to begin the drift towards the North Pole and the Fram Strait via the Transpolar Drift Stream. The data presented here were collected during the first three legs of the expedition, so all the coring activities took place on the same floe. The end dates of legs 1, 2, and 3 were 13 December, 24 February, and 4 June, respectively. The dataset contributed to a baseline study entitled, Deciphering the properties of different Arctic ice types during the growth phase of the MOSAiC floes: Implications for future studies. The study highlights downward directed gas pathways in FYI and SYI by inferring sea ice permeability and potential brine release from several time series of temperature and salinity measurements. The physical properties presented in this paper lay the foundation for subsequent analyses on actual gas contents measured in the ice cores, as well as air-ice and ice-ocean gas fluxes. Sea ice cores were collected with a Kovacs Mark II 9 cm diameter corer. To measure ice temperatures, about 4.5 cm deep holes were drilled into the core (intervals varied by site and leg) . The temperatures were measured by a digital thermometer within minutes after the cores were retrieved. The ice cores were placed into pre-labelled plastic sleeves sealed at the bottom end. The ice cores were transported to RV Polarstern and stored in a -20 degrees Celsius freezer. Each of the cores was sub-sampled, melted at room temperature, and processed for salinity within one or two days. The practical salinity was estimated by measuring the electrical conductivity and temperature of the melted samples using a WTW Cond 3151 salinometer equipped with a Tetra-Con 325 four-electrode conductivity cell. The practical salinity represents the the salinity estimated from the electrical conductivity of the solution. The dataset also contains derived variables, including sea ice density, brine volume fraction, and the Rayleigh number.

Description: This dataset describes two 17 m long sediment cores taken from beneath two thermokarst lakes in the Yukechi Alas, Central Yakutia, Russia. The first core was taken from below an Alas thermokarst lake (YU-L7; 61.76397°N, 130.46442°E) and the second core below and Yedoma lake (YU-L15; 61.76086°N, 130.47466°E). The dataset presents biogeochemical and biomarker parameters of sediment cores YU-L7 and YU-L15. Biogeochemical analyses include total carbon (TC) content, total organic carbon (TOC) content, total nitrogen (TN) content. Biomarker parameters include the n-alkane concentration, average chain length (ACL), carbon preference index (CPI), brGDGT concentration, archaeol concentration and the isoGDGT-0 concentration. The n-alkanes were measured in the aliphatic fraction by gas chromatography-mass spectromety using a Trace GC Ultra coupled to a DSQ MS. The branched and isoprenoid glycerol dialkyl glycerol tetraethers, as well as the dialkyl glycerol diether lipid (archaeol) were measured in the NSO fraction using a Shimadzu LC-10AD high-performance liquid chromatograph coupled to a Finnigan TSQ 7000 mass spectrometer via an atmospheric pressure chemical ionization interface. The pH soil is the sediment pH which was assessed by adding 6.12 mL of 0.01 M CaCl~2~ to ~2.5 g dried sediment and measuring with a Multilab 540 (WTW) at 20°C.

Description: We present sea ice temperature and salinity data from first-year ice (FYI) and second-year ice (SYI) relevant to the temporal development of sea ice permeability and brine drainage efficiency from the early growth phase in October 2019 to the onset of spring warming in May 2020. Our dataset was collected in the central Arctic Ocean during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) Expedition in 2019 to 2020. MOSAiC was an international transpolar drift expedition in which the German icebreaker RV Polarstern anchored into an ice floe to gain new insights into Arctic climate over a full annual cycle. In October 2019, RV Polarstern moored to an ice floe in the Siberian sector of the Arctic at 85 degrees north and 137 degrees east to begin the drift towards the North Pole and the Fram Strait via the Transpolar Drift Stream. The data presented here were collected during the first three legs of the expedition, so all the coring activities took place on the same floe. The end dates of legs 1, 2, and 3 were 13 December, 24 February, and 4 June, respectively. The dataset contributed to a baseline study entitled, Deciphering the properties of different Arctic ice types during the growth phase of the MOSAiC floes: Implications for future studies. The study highlights downward directed gas pathways in FYI and SYI by inferring sea ice permeability and potential brine release from several time series of temperature and salinity measurements. The physical properties presented in this paper lay the foundation for subsequent analyses on actual gas contents measured in the ice cores, as well as air-ice and ice-ocean gas fluxes. Sea ice cores were collected with a Kovacs Mark II 9 cm diameter corer. To measure ice temperatures, about 4.5 cm deep holes were drilled into the core (intervals varied by site and leg) . The temperatures were measured by a digital thermometer within minutes after the cores were retrieved. The ice cores were placed into pre-labelled plastic sleeves sealed at the bottom end. The ice cores were transported to RV Polarstern and stored in a -20 degrees Celsius freezer. Each of the cores was sub-sampled, melted at room temperature, and processed for salinity within one or two days. The practical salinity was estimated by measuring the electrical conductivity and temperature of the melted samples using a WTW Cond 3151 salinometer equipped with a Tetra-Con 325 four-electrode conductivity cell. The practical salinity represents the the salinity estimated from the electrical conductivity of the solution. The dataset also contains derived variables, including sea ice density, brine volume fraction, and the Rayleigh number.

Description: Despite the importance of surface energy budgets (SEBs) for land-climate interactions in the Arctic, uncertainties in their prediction persist. In-situ observational data of SEB components - useful for research and model validation - are collected at relatively few sites across the terrestrial Arctic, and not all available datasets are readily interoperable. Furthermore, the terrestrial Arctic consists of a diversity of vegetation types, which are generally not well represented in land surface schemes of current Earth system models. Therefore, we here provide four datasets comprising: 1. Harmonized, standardized and aggregated in situ observations of SEB components at 64 vegetated and glaciated sites north of 60° latitude, in the time period 1994-2021 2. A description of all study sites and associated environmental conditions, including the vegetation types, which correspond to the classification of the Circumpolar Arctic Vegetation Map (CAVM, Raynolds et al. 2019). 3. Data generated in a literature synthesis from 358 study sites on vegetation or glacier (〉=60°N latitude) covered by 148 publications. 4. Metadata, including data contributor information and measurement heights of variables associated with Oehri et al. 2022.

Description: This dataset provides lithological data from ICDP core 5017-1-A, retrieved from the deep northern Dead Sea basin in 2010/11, for the last glacial-interglacial transition (ca. 17-11.5 ka BP). The microfacies of the Lisan Formation was investigated between ~101 and 88.5 m sediment depth below lake floor by continuous thin section microscopy, while additional macroscopic information is provided from core catchers, as well as from over- and underlying sediment sections. Thin sections were prepared following the standard procedure by Brauer and Casanova (2001) that was adjusted for salty sediments. Thin section analyses were performed on overlapping large-scale thin sections using a Zeiss Axiolab pol microscope at magnifications of 50-400x.

Description: This dataset contains observations of water discharge rates and concentrations of dissolved organic carbon (DOC) and dissolved inorganic carbon (DIC) from a polygonal tundra site in the Lena River Delta, Russia. This dataset also contains lateral carbon fluxes of DOC and DIC that were estimated from these observations. Additionally, this dataset contains vertical fluxes of carbon dioxide and methane from the same study site. All observations were recorded on Samoylov Island (N 72.377188, E 126.495144) in the summer of 2014. The abbreviations A1, A2 and B refer to three outflows on the island where the hydrological parameters were observed (A1: N 72.379991, E 126.480886; A2: N 72.380134, E 126.481433; B: N 72.381348, E 126.483482). All outflows were approximately 10 meters. More information can be found in https://doi.org/10.5194/bg-19-3863-2022.

Description: Despite the importance of surface energy budgets (SEBs) for land-climate interactions in the Arctic, uncertainties in their prediction persist. In situ observational data of SEB components - useful for research and model validation - are collected at relatively few sites across the terrestrial Arctic, and not all available datasets are readily interoperable. Furthermore, the terrestrial Arctic consists of a diversity of vegetation types, which are generally not well represented in land surface schemes of current Earth system models. This dataset describes the environmental conditions for 64 tundra and glacier sites (〉=60°N latitude) across the Arctic, for which in situ measurements of surface energy budget components were harmonized (see Oehri et al. 2022). These environmental conditions are (proxies of) potential drivers of SEB-components and could therefore be called SEB-drivers. The associated environmental conditions, include the vegetation types graminoid tundra, prostrate dwarf-shrub tundra, erect-shrub tundra, wetland complexes, barren complexes (≤ 40% horizontal plant cover), boreal peat bogs and glacier. These land surface types (apart from boreal peat bogs) correspond to the main classification units of the Circumpolar Arctic Vegetation Map (CAVM, Raynolds et al. 2019). For each site, additional climatic and biophysical variables are available, including cloud cover, snow cover duration, permafrost characteristics, climatic conditions and topographic conditions.

Description: This dataset contains over 30 marine Electrical Resistivity Tomography (ERT) profiles taken in September 2021 around Tuktoyaktuk Island (NWT / Beaufort Sea, Canada). The measurements were part of the “Mackenzie Delta Permafrost Field Campaign” (mCan2021) within the “Modular Observation solutions for Earth Systems” (MOSES) program. The collected profiles consist of numerous adjacent vertical soundings in a (quasi-symmetric) reciprocal Wenner-Schlumberger array, using a floating cable towed behind a boat. GPS records along the electrode streamer were taken, enabling the improvement of pre- processing by excluding measurements for which the cable was curved and electrode positions deviated too widely. The aim of the study was to determine the depth of the submarine permafrost. Cleaned data is provided in csv format.

Description: This collection contains permafrost related measurements in the Mackenzie Delta, NWT, Canada from the MOSES (Modular Observation Solutions for Earth Systems) field campaign in September 2021. The field campaign was focused on three subaquatic sites: a small thermokarst lake along the ITH just south of Trail Valley Creek, "Lake 3", an elongated lake with known methane occurence in the outer Mackenzie Delta, "Swiss Cheese Lake", and north and south of Tuktoyaktuk Island. At "Swiss Cheese Lake", we measured methane and CO2 concentrations in surface water and in the air above the lake, lake bed temperatures and detailed bathymetry. At "Lake 3" we measured active layer thickness on the lake banks, lake bed temperatures, and detailed bathymetry, as well as an ERT survey to estimate the talik depth below the lake. North and south of Tuktoyaktuk Island, we measured active layer thickness and sea bed temperatures and did an extensive ERT survey to obtain the depth of the subsea permafrost table. An additional passive seismic survey was carried out and the data is available at https://doi.org/10.5880/GIPP.202199.1.

Description: This dataset contains seven Electrical Resistivity Tomography (ERT) profiles taken in September 2021 at “Lake 3”, a thermokarst lake near the Inuvik-Tuktoyaktuk-Highway (ITH), about 50 km north of Inuvik (NWT, Canada). The measurements were part of the “Mackenzie Delta Permafrost Field Campaign” (mCan2021) within the “Modular Observation solutions for Earth Systems” (MOSES) program. The collected profiles consist of numerous adjacent vertical soundings in a (quasi-symmetric) reciprocal Wenner-Schlumberger array. In addition to surveys on the lake, using a floating cable towed behind a boat, two “amphibian” profiles were taken. Starting as purely terrestrial surveys using metal spike electrodes, the cable was then moved towards the lake with some of the electrodes floating on the water surface, and some still on land. The aim of the study was to determine permafrost properties on the land, to detect a possible talik beneath the lake and to especially be able to infer the transition between the two below the shoreline.

Description: Science and education are central fields and a lever for sustainable development. With the newly developed student teaching and learning format "Transformative Innovation Lab" - TIL for short - students are to be enabled to conduct independent transformative research. To this end, the researchers, under the direction of the Wuppertal Institute, developed and tested the new learning concept in the project "Development, testing and dissemination of new qualification offers for 'change agents' for transformative learning using the real-world laboratory approach" (EEVA). The detailed results and numerous implementation tips have been published in a practical handbook aimed at academic teaching staff and other multipliers.

Description: Transport is a key economic sector in Europe, it influences the opportunities of production and consumption. By improving access to markets, goods and services, employment, housing, health care, and education, transportation projects can increase economic productivity and development. The ability to be mobile is also a prerequisite for inclusion. At the same time, transport induces a range of negative effects, most notably the emission of greenhouse gases. At the urban level, motorised transport significantly contributes to air pollution. Since 2013, the European Commission has increased EU funding for projects: The "Urban Mobility Package" provided EUR 13 billion for investments into sustainable urban mobility between 2014 and 2020. This has allowed cities across Europe to put in place a range of initiatives. European funding programmes and financing institutions such as the European Investment Bank increasingly insist on a contribution to more sustainable mobility systems in their financing commitments. The impact, however, is mixed. The European Court of Auditors warned that EU cities must shift more traffic to sustainable transport modes. They found that EU-funded projects were not always based on sound urban mobility strategies and were not as effective as intended. In many EU member states, the transfer of EU funds to cities is contingent on the existence of a SUMP. A statistical analysis of the modal split of 396 cities in the European Union revealed that the implementation of Sustainable Urban Mobility Plans positively correlates with a reduction of the share of the private car in the cities. Such plans include strategies and activities to pursue sustainable mobility. This report analyses transport and mobility in Bratislava with a view to providing a clear picture about its current sustainability state. It points to both good practice and areas of improvement. In so doing, it provides recommendations how mobility in the city can be developed increasingly sustainable. Bratislava is the capital and largest city of Slovakia. In 2016, the population of the city was 426,000 inhabitants, the Bratislava region was home to 642,000 inhabitants.

Description: The first step of complete transformation will be utilizing digital technologies and applications to improve current procedures, processes, and structures (Improve). Next, complete digitalisation will pave the way for new business models and framework conditions (Convert). Finally, comprehensive transformation of the economy and value creation will ensure the effective reorientation of society and lifestyles towards sustainability (Transform). This last step is critical for a successful ecological transformation, or a "green transformation", must be placed front and centre during international debate. Through this report, we aim to highlight and discuss the opportunities that digitalisation can bring to Germany. In particular, we will discuss three exemplary areas of ecological transformation where action is necessary: 1) A digital and circular economy that uses data to increase resource efficiency. 2) Intelligent, sustainable mobility that connects us in eco-friendly ways. 3) Transparent transitions towards sustainable food chains and agriculture. This report represents the first phase of the Shaping Digital Transformation project. In this report, we will outline the framework of our project to create a starting point for further debates.

Description: Two thirds of today's world trade is based on global value chains and supply networks. Purely regional supply chains have become less important in recent decades. The effects of these globalised structures are manifold. On the one hand, they promote employment and generate prosperity. On the other hand, they are beset by extreme social, ecological and economic imbalances. The COVID-19 pandemic has demonstrated the fragility of existing supply chain systems. The lockdown continues to disrupt complex supply chains and many problems of existing production and consumption continue to worsen. COVID-19 is one example of the crises that can shake globally networked supply chains in the short term. Other crises, such as climate change, develop more insidiously and are less immediately recognisable. Different as they are, such crises have one thing in common: they highlight the vulnerability of global social and economic structures and illustrate the impact of global trade on the regions and people of the world. This is precisely where global sustainability strategy comes in - it aims to fundamentally reduce differences and inequalities in opportunities and quality of life. The COVID-19 pandemic has forced the entire world into upheaval, creating an opportunity to make sustainability a central political resilience strategy. In the wake of the Corona pandemic, the discussion about resilient communities has flared up. In order to guarantee supply in the face of such crises, these should be more strongly regional and circular in their economic approach and global and sustainable in their perspective. The aim should be sustainable, transparent, non-exploitative supply chains that guarantee the security of supply to cover basic needs and public services despite sudden changes and crises. This discussion paper draws a future scenario of globally cooperative, circular regional economies that fundamentally reduce global inequalities in opportunities and quality of life, while at the same time permanently preserving the natural foundations of life.

Description: Cities and municipalities have had to endure a great deal in recent years, including a global coronavirus pandemic, fire disasters in the US and devastating floods like those in Germany. These are also consequences of anthropogenic climate change, and cities have to be better prepared for such events in future. In particular, the cata-strophic flooding Germany experienced in July 2021 demonstrated how ill-equipped municipalities are for this type of incident. In this paper, we look at how cities can become more resilient, sustainable and ready for the future.

Description: Nutrition is one of the most important areas for the great transformation. So how can a shift towards a sustainable food system be achieved? This paper addresses this question - based on more than ten years of research on sustainable nutrition at the Wuppertal Institute. It focuses on public catering, because even small changes - for example in the choice of ingredients - have a huge impact here. With appropriate policy frameworks, public catering can serve as an easily accessible place for consumers to experience sustainable food and at the same time be a reliable buyer of biodiversity and climate-friendly food from farmers. However, other actors are also needed for a transformation of the food system: The "Zukunftsimpuls" addresses politics, (agricultural) industry, science and every individual - because the transformation of the food system is a task for the entire society.

Description: More and more companies are announcing their intention to become climate-neutral and numerous companies already offer climate-neutral products or services: From climate-neutral parcel delivery to air travel. But what exactly do the companies' net-zero targets mean? Is the target set ambitious? And what role does offsetting play, i.e., purchasing carbon credits that are accounted against the company's own climate target? The approaches behind the proclaimed targets are often difficult to understand. Against this background, this Zukunftsimpuls provides ten recommendations for the definition and implementation of neutrality targets. Among other things, the authors advocate the use of a robust database as the basis for net-zero targets, emphasize the importance of transparent communication, and highlight the role that offsetting should play. Purchased carbon credits should make as limited a contribution as possible for meeting climate targets and should only be used to offset emissions that cannot be reduced or avoided. More generally, net-zero targets should not be made the sole criterion for ambitious climate strategies. Rather, they are a building block of a much more comprehensive strategy of corporate climate action.

Description: Organic carbon (OC) stored in Arctic permafrost represents one of Earth's largest and most vulnerable terrestrial carbon pools. Amplified climate warming across the Arctic results in widespread permafrost thaw. Permafrost deposits exposed at river cliffs and coasts are particularly susceptible to thawing processes. Accelerating erosion of terrestrial permafrost along shorelines leads to increased transfer of organic matter (OM) to nearshore waters. However, the amount of terrestrial permafrost carbon and nitrogen as well as the OM quality in these deposits are still poorly quantified. Here, we characterise the sources and the quality of OM supplied to the Lena River at a rapidly eroding permafrost river shoreline cliff in the eastern part of the delta (Sobo-Sise Island). Our multi-proxy approach captures bulk elemental, molecular geochemical and carbon isotopic analyses of late Pleistocene Yedoma permafrost and Holocene cover deposits, discontinuously spanning the last ~52 ka. We show that the ancient permafrost exposed in the Sobo-Sise cliff has a high organic carbon content (mean of about 5 wt%).We found that the OM quality, which we define as the intrinsic potential to further transformation, decomposition, and mineralization, is also high as inferred by the lipid biomarker inventory. The oldest sediments stem from Marine Isotope Stage (MIS) 3 interstadial deposits (dated to 52 to 28 cal kyr BP) and is overlaid by Last Glacial MIS 2 (dated to 28 to 15 cal ka BP) and Holocene MIS 1 (dated to 7–0 cal ka BP) deposits. The relatively high average chain length (ACL) index of n-alkanes along the cliff profile indicates a predominant contribution of vascular plants to the OM composition. The elevated ratio of iso and anteiso-branched FAs relative to long chain (C ≥ 20) n-FAs in the interstadial MIS 3 and the interglacial MIS 1 deposits, suggests stronger microbial activity and consequently higher input of bacterial biomass during these climatically warmer periods. The overall high carbon preference index (CPI) and higher plant fatty acid (HPFA) values as well as high C / N ratios point to a good quality of the preserved OM and thus to a high potential of the OM for decomposition upon thaw. A decrease of HPFA values downwards along the profile probably indicates a relatively stronger OM decomposition in the oldest (MIS 3) deposits of the cliff.

Description: Given that over 50% of Myanmar's urban inhabitants and nearly 75% of the rural population lack access to adequate electricity, the country's development agenda includes electrification as a key policy goal. The government's National Electrification Project (NEP) aims to reach 100% household electrification by 2030. To achieve this ambitious target, the government of Myanmar has established a set of strategic electrification priorities. The primary focus is to electrify the country through extension of the national grid and construction of large power plants based on fossil fuels and renewable energy. For decades, decentralised energy solutions have played a niche role in Myanmar's electrification journey. Local developers have constructed thousands of nominal "mini-grids", powered by a range of sources, including water, diesel, and solar. With the support of local communities, these initiatives provide positive stimuli for the social and economic development of villages across the country. To achieve its electrification goals, the NEP includes a segment to promote the development of new mini-grids through a set of subsidies and private sector cooperation initiatives. These target remote regions, which are difficult to electrify through extension of the main grid. This report takes an in-depth look at decentralised electrification through community-based mini-grids with a focus on renewable energy. The aim is to provide insights into the potential role of sustainable electrification and to identify both enabling and limiting factors related to the institutional and policy landscape (macro), as well as the local conditions (micro). It also aims to explore whether the cooperative model is a suitable organisational framework for the operation of mini-grids in Myanmar. The results of the study will help to inform policymakers and supporters of decentralised electrification about the potential role for cooperatives and provide ways to improve the operating environment for sustainable, community-based mini-grids.

Description: The European Union (EU) has established that the goal of achieving climate neutrality by 2050 as a key driver of innovation and growth for industry and the economy in the EU. In addition to offering great opportunities, this also poses considerable challenges for the European economy and, for the most part, for basic industries, which are particularly emission-intensive and face strong international competition. An integrated climate and industry strategy is of central importance to protecting the climate, since the production of steel, cement, basic chemicals, glass, paper, and other materials in the EU and worldwide accounts for roughly one fifth of total greenhouse gas emissions. Even in a greenhouse gas-neutral future, we will not be able to fully eliminate our need for these materials. At the same time, it is particularly challenging to produce these materials without creating emissions given the state of technology and the necessary infrastructures. This applies above all to the question of how large amounts of green energy, including electricity and hydrogen, can be produced at competitive prices. Analyses show that despite the considerable costs involved in process changeover, the costs of transforming the raw materials industry are acceptable to society as a whole, given that the additional costs usually only increase the price of the end products by a few percentage points. However, in the case of crude steel or cement, the price would increase by between one third and 100 per cent. Since almost all raw materials manufacturers face strong global market competition, in most cases they are not able to bankroll the investments in climate-neutral production and the required energy infrastructure without outside support. This paper outlines an integrated climate industrial policy package that allows the EU to utilise its existing technological leadership in many of these industries to build a greenhouse gas-neutral raw materials industry.

Description: While the Paris Agreement (PA) has enshrined ambitious long-term objectives, the current actions of the Parties to the Agreement fall far short of these goals. The Global Stocktake (GST), established in Art. 14 of the PA, may help narrow this gap between ambition and action: its purpose is to review the implementation of the PA and to assess the collective progress of the international community towards Paris goals. While some general modalities on how to conduct the GST have been adopted, the details are still to be determined. The objective of this report is to analyze existing international regimes as regards their review processes, the contribution of these review processes to various governance functions and, finally, to derive lessons for the GST. Processes analyzed include: the design of the upcoming Global Stocktake itself, the Talanoa Dialogue (TD) which is the direct precursor of the GST, the Agenda 2030 High-Level Political Forum (HLPF), which features a regular stocktaking process focused on progress toward the Sustainable Development Goals (SDGs), the review processes of the UN human rights system (UNHRS) and the review processes and assessment panels of the Montreal Protocol (MP). The analysis of each review process is organised in four section: (1) political background and context, (2) technical and organisational details of the processes, (3) interface between the political and technical processes, and (4) how the review processes contribute to achieving the objectives of the respective regime, particularly governance functions of the regime (guidance and signal, transparency and accountability, and knowledge and learning).

Description: Any energy efficiency impact evaluation can be done from different analytical perspectives, e.g. the investor/end-user perspective, program administrator perspective or the societal perspective. COMBI applies the "societal perspective", as this is most relevant for policy-making. COMBI draws on a reference scenario until the year 2030 including existing (partially already ambitious) policies. By modelling 21 sets of "energy efficiency improvement" (EEI) actions, a second efficiency scenario was modelled amounting to additional energy savings of around 8% p.a. in 2030, that is comparable to the EUCO+33 to EUCO+35 scenario. This D2.7 quantification report summarises the quantification approaches applied in the COMBI project and main project findings. It therefore draws on other COMBI reports that contain this information in greater detail in order to summarise quantifications. The report is structured in three main sections: 1. The COMBI approach and methods, explaining key methodological approaches both for individual impact quantifications and for the aggregation of impacts 2. Quantification results, giving an overview on main figures of quantified indicators and 3. Insights from cross-impact analysis, which gives a comparison between monetised impacts and presents their use for Cost-Benefit calculations in the COMBI online tool.

Description: Much of the current literature on climate clubs sees mitigation costs creating free rider incentives as the main problem of climate policy. Climate clubs are supposed to solve this problem by creating additional incentives for mitigation. Looking more in detail, one sees that the situation differs from sector to sector. Some industry sectors indeed have substantial cost and competitiveness issues. In others such as electricity and transport, there are costs at micro level but balance for economy and society as a whole is rather positive. International climate policy in general and clubs in particular should therefore be tailored to sectoral specifics.

Description: The COMBI project aimed at quantifying the multiple non-energy benefits of energy efficiency in the EU-28 area and incorporate those multiple impacts into decision-support frameworks for policy-making. Therefore, all multiple impacts of energy efficiency are analysed from an overall societal view in the project. The COMBI policy recommendations resulting from the evaluation outcomes are presented in this report. COMBI draws on a reference scenario until the year 2030 including existing policies. By modelling 21 sets of "energy efficiency improvement" (EEI) actions, a second efficiency scenario was modelled amounting to additional energy savings of around 8% p.a. in 2030, and that is comparable to the EUCO+33 to EUCO+35 scenario. All figures quantified by COMBI relate to additional values, i.e. additional impacts resulting from additional EEI actions beyond the reference scenario as a consequence of additional policies. The project quantified in total 31 individual impact indicators with appropriate state-of-the-art models.

Description: The Wuppertal Institute conducted an impact analysis of the NRW Sustainability Bond #4 of 2018 on behalf of the State Government of North Rhine-Westphalia (NRW). The most recent bond has a volume of EUR 2.025bn, a term of 10 years and consists of 52 eligible projects from the State's 2017 general budget (sustainable value-added was confirmed in a second party opinion by oekom research1). This report analyses the contribution of the bond to climate mitigation, sustainable land use and social impacts. It also includes information on the impacts of the previous three bonds (NRW Sustainability Bond #1 to #3).

Description: The Wuppertal Institute conducted an impact analysis of the NRW sustainability bond #5 of 2019 on behalf of the State government of North Rhine-Westphalia (NRW). The most recent bond has a volume of EUR 2.25 bn, a term of 15 years and consists of 52 eligible projects from the State's 2018 general budget (sustainable value-added was confirmed in a second party opinion by ISS-oekom). This report analyses the contribution of the bond to climate mitigation, sustainable land use and social impacts. It also includes information on the impacts of the previous four bonds (NRW sustainability bond #1 to #4).

Description: Despite a strong connection between the Paris Agreement and the 2030 Agenda for Sustainable Development, climate change mitigation actions and sustainable development objectives are oftentimes not aligned efficiently, causing conflicts between the objectives. This thesis creates a systematic overview of conflicts of three renewable energy technologies with the Sustainable Development Goals (SDGs) by a literature review in Web of Science. The technologies solar energy, wind energy and hydropower function as examples for climate change mitigation actions. Out of 530 screened articles, 63 demonstrated conflicts. The systematic overview reveals that conflicts are different for each technology, but conflicts in regard to biodiversity loss and the degradation of natural habitats (SDG 15) and inequalities (SDG 10) were frequently identified for all technologies. The results of the systematic overview suggest that the site selection and the decision-making process on the construction of renewable energy projects are crucial stages to avoid conflicts with the SDGs.

Description: Since urban processes need models of possible futures (referred to as travelling concepts) to drive their development, this study investigates whether planned-from-scratch smart city Kashiwa-no-ha International Campus Town Initiative can produce such an image with its smart governance approach, that is combined with an urban living lab. Using geographical governance research in relation to urban development processes as a framework, this master's thesis derives its own definition of the fuzzy concept of smart governance within the smart city vision based on a socio-geographical understanding of space, here referred to as Smart Urban Governance. Additionally, a set of indicators for the operationalisation of Smart Urban Governance is designed and applied to the case study. Methodologically, the thesis pursues a qualitative approach and, in this context, carries out a descriptive and normative governance analysis of Kashiwa-no-ha on the basis of the existing literature and empirical surveys conducted by the author. In summary, the strong role of academia in the urban planning context of community-building in Kashiwa-no-ha is exemplary and has led to a collaborative code of conduct between the traditional actors, mediated by a public-private-academic partnership, as well as to co-innovation between the city, developers, and citizens in form of a public-private-people partnership. Although the flagship project successfully addresses a large number of the Smart Urban Governance indicators defined in this context, there is potential for improvement, for example, in terms of participation, transparency, inclusion, and public spaces. Since Kashiwa-no-ha Smart City is still in an implementation phase until 2030, the thesis concludes with a forecast and a recommendation for action based on a strengths, weaknesses, opportunities, and threats analysis.