ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Ottawa : Geological Survey of Canada  (348)
  • Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory  (183)
  • English  (531)
  • Danish
  • 2005-2009
  • 1985-1989  (206)
  • 1980-1984  (325)
  • 1
    Series available for loan
    Series available for loan
    Direct filtration of streamborne glacial silt (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/23
    In: CRREL Report, 82-23
    Description / Table of Contents: A direct filtration, water treatment pilot plant was operated on the Kenai River at Soldotna, Alaska, during the summer of 1980. The purpose of the pilot plant operations was to determine the feasibility of the direct filtration process for removal of glacial silt. The major criterion used to determine feasibility was production of water containing less than 1.0 NTU of turbidity. For the range of raw water turbidities encountered (22-34 NTU), the pilot plant testing indicated that direct filtration was feasible and could be considered as an alternative to conventional waiter treatment plants containing sedimentation tanks.
    Type of Medium: Series available for loan
    Pages: 26 Seiten , Illustrationen
    Series Statement: CRREL Report 82-23
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a120751.pdf
    URL: https://hdl.handle.net/11681/9360
    Language: English
    Note: CONTENTS Abstract Preface Conversion factors: U.S. customary to metric Introduction Glacial characteristics Water treatment Materials and methods Experimental design Pilot plant intake Hydrocyclone Chemical addition system Flocculation system Filtration system Pilot plant operations Coagulant chemical preparations Flow measurement Sampling Results and discussion Kenai River w ater quality Evaluation of pilot plant testing Performance of pilot plant elements Physical and chem ical variables Conclusions Recommendations Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 2
    Series available for loan
    Series available for loan
    Subsea permafrost in Harrison Bay, Alaska : an interpretation from seismic data (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/24
    In: CRREL Report, 82-24
    Description / Table of Contents: Velocity data derived from petroleum industry seismic records from Harrison Bay show that high-velocity material ( or = 2 km/s) interpreted to be ice-bonded permafrost is common. In the eastern part of the bay, the depth to high velocity material increases and velocity decreases in an orderly manner with increasing distance from shore until the layer is no longer apparent. The western part of the bay is less orderly, possibly reflecting a different geological and thermal history. This western part may be an inundated section of the low coastal plain characterized by the region north of Teshekpuk Lake, and could have contained deep thaw lakes, creating low velocity zones. Along some seismic lines, the high-velocity material extends approximately 25 km offshore. Two anomalies have been found which could be associated with rapidly degrading permafrost. One is strong attenuation, which was interpreted as an indication of gas in the shallow deposits. The other is the presence of considerable seismic noise, including identifiable small seismic events. The origin of this noise has not been positively established, and it is proposed that it may indicate that some movement is occurring in the sediments due to thaw.
    Type of Medium: Series available for loan
    Pages: 65 Seiten , Illustrationen
    Series Statement: CRREL Report 82-24
    URL: https://apps.dtic.mil/docs/citations/ADA121020
    URL: https://hdl.handle.net/11681/9361
    Language: English
    Note: CONTENTS Abstract Preface Introduction Methods Reading records Refractions Reflections Rayleigh waves Spatial resolution Anomalies Results and discussion Seismic velocity distribution Attenuation Low-level natural seismicity Summary Literature cited Appendix A: Error estimates Appendix B: Velocity profiles Appendix C: Seismic cross sections
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 3
    Series available for loan
    Series available for loan
    Least life-cycle costs for insulation in Alaska (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/27
    In: CRREL Report, 82-27
    Description / Table of Contents: Recommendations for economical thicknesses for building insulation result from a study of fuel and construction costs of 12 military installations in Alaska. A comparison between the insulation thickness that a building owner might choose today and what he might choose in 20 years indicates a trend for much thicker insulation in the future. An analysis of how much more expensive a building built today with the thickness that would be appropriate 20 years hence indicates only a small penalty in life-cycle costs for the additional insulation. Therefore, a minimum of R-32 walls and R-62 attics is recommended for most of Alaska.
    Type of Medium: Series available for loan
    Pages: 54 Seiten , Illustrationen
    Series Statement: CRREL Report 82-27
    URL: https://apps.dtic.mil/docs/citations/ADA122806
    URL: https://hdl.handle.net/11681/9367
    Language: English
    Note: CONTENTS Abstract Preface Conversion factors Summary Introduction Determining economic thicknesses for insulation Background Analysis method for new construction Analysis method for reinsulating existing construction Sensitivity and longevity of the results Sensitivity Longevity Recommendations Saving money vs. saving energy Energy economics conservation Building energy performance standards Conclusion Literature cited Appendix A: Heating system costs Appendix B: Present worth factors Appendix C: Base case and incremental thermal properties Appendix D: LCC comparison graphs for wall and roof systems Appendix E: Cost penalties for energy conservatism Appendix F: Graphic aid for figuring energy savings thermal improvements
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 4
    Series available for loan
    Series available for loan
    Hydrology and climatology of the Caribou-Poker Creeks research Watershed, Alaska (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/26
    In: CRREL Report, 82-26
    Description / Table of Contents: The Caribou-Poker Creeks Research Watershed is a small (101.5-sq km) drainage basin located 48 km northwest of Fairbanks, Alaska. Elevations within the watershed range from 210 to 826 m, and approximately 28% of its area is underlain by permafrost. Climatic differences between the watershed and Fairbanks are primarily due to the higher elevation of the watershed. Generally the watershed climatic sites are warmer in winter and cooler in summer than Fairbanks. Within the watershed the greatest temperature contrasts exist in winter, when the valley-bottom sites are beneath the regional air temperature inversion, and the higher sites are above it. From May through September the total precipitation averages 270 mm, 1.47 times that received at Fairbanks. The annual precipitation is about 1.7 times that of Fairbanks. The historical precipitation record at Fairbanks indicates that summer precipitation was below the long-term normal in eight of the eleven years of watershed measurements (1969-1980); no climatic extremes occurred during this period. An analysis of annual streamflow data showed an inconsistency of baseflow recessions from year to year. The runoff-rainfall ratio for individual summer storms averaged 0.35 for Caribou Creek. Comparisons of spot discharge measurements of predominantly permafrost and non-permafrost subwatersheds showed that permafrost-dominated watersheds have a much flashier response to precipitation than non-permafrost watersheds. A comparison of the annual flow distribution of the watershed indicated that Caribou Creek has lower summer and higher winter discharges per unit area than the Chena or Salcha Rivers.
    Type of Medium: Series available for loan
    Pages: 42 Seiten , Illustrationen
    Series Statement: CRREL Report 82-26
    URL: https://apps.dtic.mil/docs/citations/ADA122402
    URL: https://hdl.handle.net/11681/9369
    Language: English
    Note: CONTENTS Abstract Preface Introduction Setting Geology and soils Vegetation Climate Air temperature Precipitation Hydrology Annual and monthly runoff Individual storms Baseflow recessions Spatial flow variability Temporal flow variability Summary and conclusions Literature cited Appendix A: Station histories
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 5
    Series available for loan
    Series available for loan
    Growth of faceted crystals in a snow cover (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/29
    In: CRREL Report, 82-29
    Description / Table of Contents: Ice grains in a snow cover with a low temperature gradient assume a well-rounded equilibrium form. However, at temperature gradients of 0.1 to 0.2 C/cm (depending somewhat on temperature and snow density), the rounded grains recrystallize into a faceted kinetic growth form. The large temperature gradient must play a decisive role in moving the vapor fast enough to sustain the rapid growth rate associated with the kinetic growth form. Once the large temperature gradient is removed, the grains recrystallize back to the equilibrium form. the recrystallization occurs in either direction without a change in bulk density. The growth of faceted crystals begins at the warmer base of the snow cover where the excess vapor pressure is largest. A transition between the overlying rounded grains moves upward in time. Faceted crystals also grow just below crusts of reduced permeability, where the increased vapor accumulation can sustain the excess vapor pressure neded for kinetic growth. The heat and vapor flows are described using a model based on thermodynamic equilibrium. The temperature distribution is shown to be quasi-linear at steady state in homogeneous snow. The recrystallization of the snow is modeled using the rounded grains as sources and the faceted grains as sinks. In the future this model should be extended to account for different temperatures among the sources and sinks.
    Type of Medium: Series available for loan
    Pages: 27 Seiten , Illustrationen
    Series Statement: CRREL Report 82-29
    URL: https://apps.dtic.mil/docs/citations/ADA122792
    URL: https://hdl.handle.net/11681/9373
    Language: English
    Note: Contents: Abstract Preface Introduction Vapor flow Temperature profile Crystal growth rates Equilibirum versus kinetic growth forms of snow crystals Discussion Summary Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 6
    Series available for loan
    Series available for loan
    Equations for determining the gas and brine volumes in sea ice samples (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/30
    In: CRREL Report, 82-30
    Description / Table of Contents: Equations are developed that can be used to determine the amount of gas present in sea ice from measurements of the bulk ice density, salinity and temperature in the temperature range o f-2 to -30°C. Conversely these relationships can be used to give the density of sea ice as a function of its temperature and salinity, considering both the presence of gas and of solid salts in the ice. Equations are also given that allow the calculation of the gas and brine volumes in the ice at temperatures other than that at which the bulk density was determined.
    Type of Medium: Series available for loan
    Pages: 13 Seiten , Illustrationen
    Series Statement: CRREL Report 82-30
    URL: https://cdm16021.contentdm.oclc.org/digital/collection/p266001coll1/id/7048
    URL: https://hdl.handle.net/11681/9372
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 7
    Series available for loan
    Series available for loan
    The effects of conductivity on high-resolution impulse radar sounding, Ross Ice Shelf, Antarctica (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/42
    In: CRREL Report, 82-42
    Description / Table of Contents: A high-resolution impulse radar profiling system was evaluated for 1) detecting the existence of sea ice which coring has revealed to exist on the bottom of the Ross Ice Shelf at Site J-9, 2) detecting the preferred horizontal c-axis azi-muthal direction of the sea ice crystals, using the voltage amplitude of the radar reflection from the sea ice bottom, and 3) determining the direction of the currents under an Antarctic ice shelf. A field program was conducted consisting of a surface radar survey on the Ross Ice Shelf at Site J-9 and surface and airborne radar profiling on the McMurdo Ice Shelf. The CRREL impulse radar system, operating at a center frequency of either 80 MHz or 20 MHz, was unable to detect the shelf bottom at Site J-9, which drilling revealed to be 416 m below the snow surface. The radar system was used to profile the McMurdo Ice Shelf both from the snow surface and from the air; a shelf thickness of about 275 m was easily detected. Theoretical considerations indicate that the bulk conductivity of the ice shelf at Site J1-9 was higher than originally anticipated, and this limited the radar sounding depth to about 405 m when operating at a frequency of 20 MHz.
    Type of Medium: Series available for loan
    Pages: iv, 19 Seiten , Illustrationen
    Series Statement: CRREL Report 82-42
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a124456.pdf
    URL: https://hdl.handle.net/11681/9323
    Language: English
    Note: CONTENTS Abstract Introduction Profiling system Theoretical considerations Field program Discussion Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 8
    Series available for loan
    Series available for loan
    Ice sheet retention structures (1983)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-83/30
    In: CRREL Report, 83-30
    Description / Table of Contents: Ice sheets are formed and retained in several ways in nature, and an understanding of these factors is needed before most structures can be successfully applied. Many ice sheet retention structures float and are somewhat flexible; others are fixed and rigid or semirigid. An example of the former is the Lake Erie ice boom and of the latter, the Montreal ice control structure. Ice sheet retention technology is changing. The use of timber cribs is gradually but not totally giving way to sheet steel pilings and concrete cells. New structures and applications are being tried but with caution. Ice-hydraulic analyses are helpful in predicting the effects of structures and channel modifications on ice cover formation and retention. Often, varying the flow rate in a particular system at the proper time will make the difference between whether a structure will or will not retain ice. The structure, however, invariably adds reliability to the sheet ice retention process.
    Type of Medium: Series available for loan
    Pages: iv, 39 Seiten , Illustrationen , 1 Beilage
    Series Statement: CRREL Report 83-30
    URL: https://apps.dtic.mil/docs/citations/ADA138030
    URL: https://hdl.handle.net/11681/9289
    Language: English
    Note: Contents Abstract Preface Introduction Natural ice sheets Choosing an ice control structure Flexible structures Ice booms Frazil collector lines Fence booms Rigid or semirigid structures Pier-mounted booms Stone groins Artificial islands Removable gravity structures Timber cribs Weirs Pilings and dolphins Structures built for other purposes Hydroelectric dams Wicket dams Light piers and towers Bridge piers Breakwaters Ice control not using Structures Channel improvements Ice sheet tying Ice sheet bridges Conclusions Literature cited Appendix A: Ice control structure
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 9
    Series available for loan
    Series available for loan
    Ice force measurements on a bridge pier in the Ottauquechee River, Vermont (1983)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-83/32
    In: CRREL Report, 83-32
    Description / Table of Contents: Ice forces on a bridge pier in the Ottauquechee River, in Quechee, Vermont, were measured by installing fourpanels-each capable of measuring forces in the normal and tangential direction - on both sides of a vertical V-shaped pier nose. The measured forces are presented for a short period during an ice run. After the ice run, the thickness and sizes of the ice floes were measured and the compressive strength of the ice was determined in the laboratory from the ice samples collected along the river banks. The water level measurements made at several locations along theriver are also presented for the period of the ice run.
    Type of Medium: Series available for loan
    Pages: ii, 8 Seiten , Illustrationen
    Series Statement: CRREL Report 83-32
    URL: https://apps.dtic.mil/docs/citations/ADA139425
    URL: https://hdl.handle.net/11681/9291
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 10
    Series available for loan
    Series available for loan
    Mechanics of ice jam formation in rivers (1983)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-83/31
    In: CRREL Report, 83-31
    Description / Table of Contents: A mathematical model is described that is used to determine the maximum ice conveyance capacity of a river channel. Based upon this model, computer programs were developed that enable the ice discharge to be calculated for steady-state flow conditions. For rivers that have uniform flow, the maximum ice-conveying capacity can be described with a simple function expressed in terms of the size of the ice fragments, channel geometry, and the flow of water in the river. For nonuniform flows, the computer program determines the elevation profile of the surface layer in addition to other flow characteristics, such as the velocity and surface concentration of the ice fragments. The location along this surface profile where the ice conveyance capacity becomes less than the upstream supply is determined and is considered to be the position where a surface ice jam or ice bridge will be formed.
    Type of Medium: Series available for loan
    Pages: iv, 21 Seiten , Illustrationen
    Series Statement: CRREL Report 83-31
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a138371.pdf
    URL: https://hdl.handle.net/11681/9292
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Constitutive relationships Equations of motion Uniform flow Nonuniform flow Ice transport: Uniform flow Symmetric channel Asymmetric channel Ice transport: Nonuniform flow Further considerations Basis for model improvement Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 11
    Series available for loan
    Series available for loan
    Erosion of perennially frozen streambanks (1983)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-83/29
    In: CRREL Report, 83-29
    Description / Table of Contents: A literature review indicated that the effects or permafrost on streambank erodibility and stability are not yet understood because systematic and quantitative measurements are seriously lacking. Consequently, general controversy exists as to whether perennially frozen ground inhibits lateral erosion and bankline recession, or whether it increases bank recession rates. Perennially frozen streambanks erode because of modification of the bank's thermal regime by exposure to air and water, and because of various erosional processes. Factors that determine rates and locations of erosion include physical, thermal and structural properties of bank sediments, stream hydraulics and climate. Thermal and physical modification of streambanks may also induce accelerated erosion within permafrost terrain removed from the immediate river environment. Bankline or bluffline recession rates are highly variable, ranging from less than 1 m/year to over 30 m/year and, exceptionally, to over 60 m/year. Long-term observations of the physical and thermal erosion processes and systematic ground surveys and measurements of bankline-bluffline recession rates are needed.
    Type of Medium: Series available for loan
    Pages: iv, 26 Seiten , Illustrationen
    Series Statement: CRREL Report 83-29
    URL: https://apps.dtic.mil/docs/citations/ADA138410
    URL: https://hdl.handle.net/11681/9290
    Language: English
    Note: CONTENTS Abstract Preface Introduction Stream bank erosional processes Permafrost and related factors Permafrost and erosion General Erosional processes Bank zone processes Bluff zone processes Factors affecting perm afrost erodibility Exposure to currents and wind waves Texture and stratigraphy Ice content, distribution and type Slope aspect Coriolis force Timing and depth of thaw Water level and temperature Vegetation Ice and snow cover Groundwater Rates and timing of erosion and recession Overall effects of permafrost Recommendations for research Literature cited Appendix A : Processes of stream bank modifications
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 12
    Series available for loan
    Series available for loan
    Mechanical properties of multi-year sea ice : phase II: test results (1985)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-85/16
    In: CRREL Report, 85-16
    Description / Table of Contents: This report presents the results of the second phase of a test program designed to obtain a comprehensive understanding of the mechanical properties of multi-year sea ice from the Alaskan Beaufort Sea. In Phase 2, 62 constant-strain-rate uniaxial compression tests were performed on horizontal and vertical ice samples from multi-year pressure ridges to examine the effect of sample orientation on ice strength. Also conducted were 36 constant-strain-rate tension tests, 55 conventional triaxial tests and 35 constant-load compression tests on multi-year pressure ridge samples to provide data for developing ice yield criteria and constitutive laws. Data are presented on the strength, failure strain and modulus of multi-year sea ice under different loading conditions. The effects of ice temperature, porosity, structure, strain rate, confining pressure and sample orientation on the mechanical properties of multi-year sea ice are examined.
    Type of Medium: Series available for loan
    Pages: vi, 89 Seiten , Illustrationen
    Series Statement: CRREL Report 85-16
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a166333.pdf
    URL: https://hdl.handle.net/11681/9414
    Language: English
    Note: CONTENTS Abstract Preface Introduction Field sampling program Site selection and description Coring procedures Core logging procedures Shipping and storage of ice samples Ice description Salinity and density Structure Constant-strain-rate compression tests Test variables Uniaxial compressive strength Strength and structure Strength and porosity Residual compressive strength Failure strain Initial tangent modulus Constant-strain-rate uniaxial tension tests Test variables Uniaxial tensile strength Failure strains Initial tangent modulus Constant-strain-rate triaxial tests Equipment Test variables Synthane end caps Triaxial strength Failure strains Initial tangent modulus Effect of sinthane end caps on results Constant-load compression tests Test variables Test results Conclusions Literature cited Appendix A: Ice structure profile of ridge C core Appendix H: Test data Appendix C: Static determination of Young's modulus in sea ice
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 13
    Series available for loan
    Series available for loan
    The chemical and structural properties of sea ice in the southern Beaufort Sea (1989)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-89/25
    In: CRREL Report, 89-25
    Description / Table of Contents: This study provides a detailed chemical and structural profile of first-year and multiyear Arctic sea ice. Ice cores were collected during April- May 1986 and 1987 near Prudhoe Bay, Alaska. Concentrations of Cl, Br, SO4, Na, Ca, K, Mg, PO4, SiO4, NO3, NO2 and NH4 were determined for samples chosen on the basis of structural ice type. Chemical and statistical analyses indicate that finer-grained structures incorporate more impurities and that major ion chemistry is controlled almost entirely by salinity. Mg is enriched in the ice indicating precipitation is occurring at temperatures higher than previously reported. K is depleted in the ice suggesting preferrential drainage. Ratios of the major ions are the same for first-year and multiyear ice and are similar to that of seawater indicating that as the ice ages no significant changes occur in ice chemistry. Nutrient concentrations in the ice are enriched with respect to the underlying water, indicating that biological activity occurs in the ice and processes other than the overall salinity effect and brine drainage are affecting nutrient concentrations within the ice.
    Type of Medium: Series available for loan
    Pages: vi, 144 Seiten , Illustrationen
    Series Statement: CRREL Report 89-25
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a219746.pdf
    URL: https://hdl.handle.net/11681/9097
    Language: English
    Note: CONTENTS Abstract Preface Introduction Background Formation, growth, and structure of sea ice Oceanic frazil production Multiyear ice Equilibrium growth Summer ice decay Annual layering Salinity distribution in sea ice Chemistry of sea ice Study area description Objectives Methodology Sample collection Blanks Chemical analyses Thin sections Data reduction Results and discussion First-year ice Multiyear ice Comparison of first-year and multiyear ice Summary Conclusions Future work References Appendix A: Concentration of chemical species in sea ice as reported in the literature Appendix B: Ice and water data Appendix C: Linear regression data
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 14
    Series available for loan
    Series available for loan
    Evaluation of the magnetic induction conductivity method for detecting frazil ice deposits (1987)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-87/17
    In: CRREL Report, 87-17
    Description / Table of Contents: The ability to map frazil ice deposits and water channels beneath an ice-covered river in central Alaska using the magnetic induction conductivity (MI) technique has been assessed. The study was performed during the first week of March of 1986 on the Tanana River near Fairbanks and employed a commercially available instrument operating at a fixed frequency with a fixed antenna (coil) spacing and orientation. Comparisons of the MI data with theoretical models based upon physical data measured along three cross sections of the river demonstrate the sensitivity of the MI technique to frazil ice deposits. The conductivity generally derived for the frazil ice deposits encountered is very low (approx. .00063 s/m) when compared with the measured value for water (approx. 0.011 S/m), and is similar to the calculated values for gravel and sandy gravel bed sediments. In all three cross sections, maxima in the apparent conductivity profiles correlated with frazil ice deposits. Difficulties, possibly due to adverse effects of cold weather upon instrument calibration, affected the quantitative performance of the instrument on one cross section, although the interpretation of the data (locations of open channels vs frazil deposits) was qualitatively unaffected.
    Type of Medium: Series available for loan
    Pages: iii, 17 Seiten , Illustrationen
    Series Statement: CRREL Report 87-17
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a186940.pdf
    URL: https://hdl.handle.net/11681/9023
    Language: English
    Note: CONTENTS Abstract Preface Introduction Magnetic induction conductivity method Site description and survey methods Cross section field data and modeling results X6 X3A X4 Conclusions and recommendations Literature cited Appendix A: Discussion of errors Appendix B: Modeling data
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 15
    Series available for loan
    Series available for loan
    Microwave and structural properties of saline ice (1987)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-87/20
    In: CRREL Report, 87-20
    Description / Table of Contents: The structure and salinity characteristics of saline ice slabs removed from ice sheets grown in an outdoor pool have been studied and related to the complex relative dielectric permittivity measured with free-space transmission techniques at 4.80 and 9.50 GHz. The saline ice closely simulated arctic sea ice in its structural and salinity characteristics, which were regularly monitored in a number of ice sheets grown during the winters of 1983-84 and 1984-85. In-situ transmission measurements at similar frequencies were also made on the ice sheets themselves using antennas located above and beneath the ice. The slab measurements were made during warming from -29° to -2°C on slabs grown during the winter of 1983-84 (4.75 GHz) and during a warming and cooling cycle over a slightly larger temperature range on slabs grown during the winter of 1984-85 (4.80 and 9.50 GHz).
    Type of Medium: Series available for loan
    Pages: v, 41 Seiten , Illustrationen
    Series Statement: CRREL Report 87-20
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a189307.pdf
    URL: https://hdl.handle.net/11681/9022
    Language: English
    Note: CONTENTS Abstract Preface Part I - Structural properties Introduction Experimental setup Analytical techniques Results and discussion 1983-84 experiments 1984-85 experiments Conclusions and recommendations Part Il - Microwave properties Introduction Measurement techniques Results 1983-84 experiments 1984-85 experiments 1984-85 in-situ experiments Discussion Comparison of data Analytical modeling Summary and conclusions Literature cited Appendix A: Dielectric mixing model of sea ice
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 16
    Series available for loan
    Series available for loan
    Thermal instability and heat transfer characteristics in water/ice systems (1987)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-87/22
    In: CRREL Report, 87-22
    Description / Table of Contents: This review discusses problems associated with the anomalous temperature-density relations of water. It covers a) onset of convection, b) temperature structure and natural convective heat transfer, and c) laminar forced convective heat transfer in the water/ice system. The onset of convection in a water/ice system was found to dependent on thermal boundary conditions, not a constant value as in the classical fluids that have a monotonic temperature-density relationship. The water/ice system also exhibits a unique temperature distribution in the melt layer immediately after the critical Rayleigh number is exceeded and soon after it establishes a more or less constant temperature region progressively deepening as the melt layer grows. The constant temperature is approximately 3.2°C for water layers formed from above but varies for melt layers from below. The heat flux across the water/ice interface was found to be a weak power function and to increase linearly with temperature for melted layers from above and below, respectively.
    Type of Medium: Series available for loan
    Pages: vi, 43 Seiten , Illustrationen
    Series Statement: CRREL Report 87-22
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a189627.pdf
    URL: https://hdl.handle.net/11681/9028
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Analytical studies on the onset of convection in a horizontal water layer Experimental studies on the onset of convection in a circular horizontal melt layer Temperature structure and heat transfer In a horizontal layer In a circular horizontal melt layer pHeat transfer studies in nonplanar geometries Forced convective heat transfer over a melting surface Discussion and conclusions Onset of convection Temperature structure and natural convective heat transfer Laminar forced convective heat transfer Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 17
    Series available for loan
    Series available for loan
    Options for management of dynamic ice breakup on the Connecticut River near Windsor, Vermont (1988)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-88/1
    In: CRREL Report, 88-1
    Description / Table of Contents: The Cornish-Windsor bridge is the longest covered bridge in the United States and has significant historical value. At a large peak flow, dynamic ice breakup of the Connecticut River can threaten the bridge and cause flood damage in the town of Windsor, Vermont. Throughout the 1985-86 winter we regularly monitored ice conditions, including a midwinter dynamic ice breakup on 27 January. We conducted controlled release tests over the operating range of the turbines at Wilder Dam upstream during both open water and ice cover conditions. These data and observations were analyzed in light of more than 60 years of temperature and discharge records. Our analysis indicates that river regulation presents alternatives for ice management that would minimize the probability of bridge damage and flooding during breakup. The flow can be regulated early in the winter to promote the growth of a stable ice cover, minimizing the total ice production in the reach. In the weeks prior to breakup, sustained releases and above-freezing air temperatures cause melting, weakening and gradual breakup of the ice, greatly reducing the flooding potential. Also, it is possible to produce a controlled ice breakup prior to an imminent natural event at lower stage and discharge. All of these ice control alternatives have associated power production costs.
    Type of Medium: Series available for loan
    Pages: iii, 21 Seiten , Illustrationen
    Series Statement: CRREL Report 88-1
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a195329.pdf
    URL: https://hdl.handle.net/11681/9026
    Language: English
    Note: CONTENTS Abstract Preface Introduction Background Analysis of historical data Field observations Controlled release tests January 1986 ice breakup Connecticut River ice control Minimizing ice production Hydrothermal melting Controlled ice breakup Conclusions Literature cited Appendix A: Detailed ice breakup chronology
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 18
    Series available for loan
    Series available for loan
    Mechanical properties of multi-year sea ice : phase II: ice structure analysis (1988)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-88/5
    In: CRREL Report, 88-5
    Description / Table of Contents: This report describes the structural analysis of multi-year sea ice samples that were tested in the second phase of a program designed to obtain a comprehensive understanding of the mechanical properties of multi-year sea ice from the Alaskan Beaufort Sea. Each test specimen is classified into one of three major ice texture categories: granular, columnar, or a mixture of columnar and granular ice. The crystallographic orientation, percent columnar ice, and grain size are then evaluated for the granular and/or columnar ice in the sample. Test results are interpreted with respect to these parameters. The overall composition of multi-year ridges is considered, based on the extensive field sampling that was done in the program. The effect of sample orientation on the results is also discussed.
    Type of Medium: Series available for loan
    Pages: iii, 32 Seiten , Illustrationen
    Series Statement: CRREL Report 88-5
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a194980.pdf
    URL: https://hdl.handle.net/11681/9077
    Language: English
    Note: CONTENTS Abstract Preface Introduction Sample analysis Continuous multi-year ridge core Tested multi-year ridge ice samples Unconfined constant-strain-rate compression tests Confined constant-strain-rate compression tests Uniaxial constant-strain-rate tension tests Discussion Conclusion Literature cited Appendix A: Multi-year ridge sample data
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 19
    Series available for loan
    Series available for loan
    On the pressure drop through a uniform snow layer (1988)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-88/14
    In: CRREL Report, 88-14
    Description / Table of Contents: An experimental study covering a mass flow rate ranging from 1.62 to 67.45 g/cm2-s and snow density varying from 0.377 to 0.472 g/cm3 has been conducted. Pressure drops ranging from 0.012 to 2.868 gf/cm2 were recorded. A plot of the friction factor fp vs Rep (defined as the classical Reynolds number Re for fluid flow through conduits) showed a good representation of all the experimental data. The least-squares analysis resulted in an expression of f sub p = 118/Rep to the 1.095 power for snow, in comparison with the expression f sub p = 64/Rep developed for fluid flow through porous media of randomly packed metallic and nonmetallic materials of spherical and nonspherical shapes.
    Type of Medium: Series available for loan
    Pages: iv, 18 Seiten , Illustrationen
    Series Statement: CRREL Report 88-14
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a201045.pdf
    URL: https://hdl.handle.net/11681/9070
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Experimental setup and procedure Experimental results Discussion and conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 20
    Series available for loan
    Series available for loan
    Evaluation of selected frost-susceptibility test methods (1986)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-86/14
    In: CRREL Report, 86-14
    Description / Table of Contents: Three methods for determining the frost susceptibility of soils are evaluated in this report. These methods are the U.S. Army Corps of Engineers frost design soil classification system, a moisture-tension/hydraulic-conductivity test, and a laboratory freeze-thaw test. The Corps method, which is based on particle size, soil classification, and a laboratory freezing test, was found to be useful for identifying frost-susceptibility. The moisture-hydraulic-conductivity test was found to be unacceptable because it required too much time and its results correlated poorly with field observations. The freeze-thaw test was determined to be the most accurate of the methods studied, including the freeze test that is a part of the Corps method. The freeze-thaw test is thoroughly described. It includes indexes of both frost-heave susceptibility (heave rate) and thaw-weakening susceptibility (CBR after thawing). It also accounts for the effects of freeze-thaw cycling and is completely automated to improve the repeatability of the test results. It is suggested that the freeze-thaw test considered as a replacement for the Corps freezing test.
    Type of Medium: Series available for loan
    Pages: v, 56 Seiten , Illustrationen
    Series Statement: CRREL Report 86-14
    URL: https://hdl.handle.net/11681/9462
    Language: English
    Note: Contents Abstract Preface Introduction Description of the selected sites Corps of engineers frost design soil classification system Moisture-tension/hydraulic-conductivity tests Freezing test Validation Description of test sites and materials Sample preparation Results and analysis of laboratory tests Corps of engineers frost design soil classification system Moisture-tension/hydraulic-conductivity test Freezing test Discussion Conclusions Recommendations Literature cited Appendix A: Summary of frost-susceptibility tests on natural soil
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 21
    Series available for loan
    Series available for loan
    Resilient modulus of freeze-thaw affected granular soils for pavement design and evaluation; Part 3: Laboratory tests on soils from Albany County Airport (1987)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-87/2
    In: CRREL Report, 87-2
    Description / Table of Contents: This is the third in a series of four reports on the laboratory and field testing of a number of road and airfield subgrades, covering the laboratory repeated-load triaxial testing of five soils in the frozen and thawed states and analysis of the resulting resilient modulus measurements. The laboratory testing procedures allow simulation of the gradual increase in stiffnessfound in frost-susceptible soils after thawing. The resilient modulus is expressed in a nonlinear model in terms of the applied stresses, the soil moisture tension level (for unfrozen soil), the unfrozen water content (for frozen soil) and the dry density. The resilient modulus is about 10 GPa for the frozen material at temperatures in the range of -5° to -8° C. The decrease in modulus with increasing temperature was well-modeled in terms of the unfrozen water content. Upon thaw, the modulus dropped to about 100 MPa and generally increased with increasing confining stress and decreased with increasing principal stress ratio. The modulus also increased with the soil moisture tension level. The resilient Poisson's ratio did not appear to be a systematic function of any of the test variables.
    Type of Medium: Series available for loan
    Pages: iii, 36 Seiten , Illustrationen
    Series Statement: CRREL Report 87-2
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a179253.pdf
    URL: https://hdl.handle.net/11681/9037
    Language: English
    Note: CONTENTS Abstract Preface Introduction Test sections and materials Specimen preparation Test soils Asphalt concrete Laboratory testing Soil testing Waveforms of applied stress Asphalt concrete Data reduction and analysis Soil Asphalt concrete Results and discussion General Resilient modulus Summary Conclusions Literature cited Appendix A: Soil moisture tension versus water content for several test soils Appendix B: Tabulated results for all tests on frozen and thawed soils
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 22
    Series available for loan
    Series available for loan
    Electromagnetic property trends in sea ice; Part I (1987)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-87/6
    In: CRREL Report, 87-6
    Description / Table of Contents: Two-phase dielectric mixing model results are presented showing the electromagnetic properties of sea ice versus depth. The modeled data are compared with field measurements and show comparable results. It is also shown how the model data can be used in support of impulse radar and airborne electromagnetic(AEM) remote sensing of sea ice. Examples of the remote measurement of sea ice thickness using impulse radar operating in the 80- to 300-MHz frequency band and low-frequency (500 to 30,000 Hz) sounding techniques are presented and discussed. Keywords: Polar regions; Radar pulses.
    Type of Medium: Series available for loan
    Pages: vii, 55 Seiten , Illustrationen
    Series Statement: CRREL Report 87-6
    URL: https://hdl.handle.net/11681/9041
    Language: English
    Note: Contents Abstract Preface Nomenclature Introduction Sea ice growth and structure Model sea ice Brine salinity Seawater and model brine conductivity Complex dielectric constant of brine Electromagnetic properties of model sea ice at 100 MHz Electromagnetic properties of model sea ice at 100 and 500 MHz and 1 and 5 GHz Example of impulse radar sea ice profiling results Example of frequency-domain electromagnetic sea ice thickness sounding Concluding remarks Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 23
    Series available for loan
    Series available for loan
    Resilient modulus of freeze-thaw affected granular soils for pavement design and evaluation; Part 2: Field validation tests at Winchendon, Massachusetts, test sections (1986)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-86/12
    In: CRREL Report, 86-12
    Description / Table of Contents: Stress-deformation data for six granular soils ranging from sandy silt to dense-graded crushed stone were obtained from in-situ tests and laboratory tests. Surface deflections were measured in the in-situ tests, with repeated-load plate-bearing and falling-weight deflectometer equipment, when the six granular soils were frozen, thawed, and at various stages of recovery from thaw weakening. The measured deflections were used to judge the validity of procedures developed for laboratory triaxial tests to determine nonlinear resilient moduli of specimens in the frozen, thawed, and recovering states. The validity of the nonlinear resilient moduli, expressed as functions of externally applied stress and moisture tension, was confirmed by using the expressions to calculate surface deflections that were found to compare well with deflections measured in the in-situ tests. The tests on specimens at various stages of recovery are especially significant because they show a strong dependence of the resilient modulus on moisture tension, leading to the conclusion that predictions or in-situ measurements of moisture tension can be used to evaluate expected seasonal variation in the resilient modulus of granular soils.
    Type of Medium: Series available for loan
    Pages: v, 70 Seiten , Illustrationen
    Series Statement: CRREL Report 86-12
    URL: http://hdl.handle.net/11681/9326
    Language: English
    Note: CONTENTS Abstract Preface Introduction Sampling of test section Laboratory tests Asphalt concrete Natural subgrade material Test soils Field tests Analysis of field-loading tests Discussion Conclusions Literature cited Appendix A: Field data Appendix 8: Ground temperatures prevailing during plate-loading tests Appendix C: Measured surface deflections compared with deflections calculated by NELAPAV Appendix D: Resilient moduli and supporting data calculated by NELAPAV
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 24
    Series available for loan
    Series available for loan
    Thermal convection in snow (1985)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-85/9
    In: CRREL Report, 85-9
    Description / Table of Contents: Large temperature gradients applied to a snow cover drive water vapor upwards and result in rapid recrystallization of snow crystals. The same temperature gradients create gradients of air density that can cause flows of air through the snow cover. The formalism necessary to describe these flows I developed heroin an effort to include the convection of vapor in the understanding of snow metamorphism. The theory of convection through porous media is extended here to include the transport of water vapor, which is important because of its latent heat. Results are presented in terms of a Lewis number, defined as the ratio of thermal to mass diffusivities. For Lewis numbers greater than 1.0 phase change intensifies convection, and for Lewis numbers less than 1.0 phase change retards convection. Two boundary conditions of special interest in the study of snow, a constant heat flux bottom and a permeable top are investigated. Their influence on the transfer of heat is quantified, and it is found that heat transfer can be described as a linear function of the driving force for convection. Convection in sloped layers is quantified, and explained in a physically consistent manner. The effect of a permeable top on convection at low Rayleigh numbers is derived. Experiments are performed to measure the effects of convection on heat transfer through glass beads and snow. The model results using constant flux boundary conditions are confirmed by the experiments. Experiments show that convection can occur in snow, and that convection behaves in a manner consistent with our theoretical understanding of the phenomenon. Some uncertainty exists about the permeability and thermal conductivity of snow and hence it is uncertain if thermal convection would occur for a given temperature gradient, density and thickness. Also, for a given convective intensity, there is much uncertainty about how much the rate of snow metamorphism is increased.
    Type of Medium: Series available for loan
    Pages: vi, 70 Seiten , Illustrationen
    Series Statement: CRREL Report 85-9
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a157577.pdf
    URL: https://hdl.handle.net/11681/9395
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Snow metamorphism Mass transfer by diffusion in snow Heat transfer Background-porous media Structure of thermal convection Rayleigh number Onset problem Heat transfer attributable to thermal convection Layering and slope effects Studies of convection through snow Modeling Equation of motion Energy equation Finite difference methods Numerical solution Verification of the model Modeling results Effects of constant flux and permeable boundaries on convection in horizontal layers Effects of phase change on convection Convection in sloped layers Experiments Introduction Experimental apparatus Experimental results and discussion Glass beads Snow Applications and conclusions Onset of Benard convection in seasonal snow covers Applications to snow metamorphism Summary Recommendations Literature cited Appendix A: Derivation of fmite difference formulae Appendix B: Computer programs Appendix C: Sample calculations
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 25
    Series available for loan
    Series available for loan
    TNT, RDX and HMX explosives in soils and sediments : analysis techniques and drying losses (1985)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-85/15
    In: CRREL Report, 85-15
    Description / Table of Contents: A method for the analysis of TNT, RDX and HMX explosives in soils and sediments has been developed. It consists of methanol extraction followed by reversed-phase high performance liquid chromatography using 10% acetonitrile/40% methanol/50% water as the eluant. This method was used to study the effect of various drying techniques upon the recovery of TNT, RDX, and HMX from soil and sediment samples contaminated with high (%) and low (micron g/g) levels of these explosives. For highly contaminated samples, complete recovery of TNT and RDX was obtained using freeze drying while air drying at room temperature resulted in greater than 90% recovery for both explosives. Other techniques, such as oven drying at 105 C, oven drying at 45 C, microwave oven drying, and drying under infrared lamps, all resulted in greater losses, with TNT and RDX recoveries ranging from 76 to 90%. Drying losses were not due to simple volatilization containing low levels of TNT, RDX and HMX, recoveries of all three explosives were quantitative for all the above drying techniques.
    Type of Medium: Series available for loan
    Pages: iii, 15 Seiten , Illustrationen
    Series Statement: CRREL Report 85-15
    URL: https://apps.dtic.mil/docs/citations/ADA163278
    URL: https://hdl.handle.net/11681/9417
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 26
    Series available for loan
    Series available for loan
    Airborne radar survey of a brash ice jam in the St. Clair River (1989)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-89/2
    In: CRREL Report, 89-2
    Description / Table of Contents: A brash ice jam in the South Channel of the St. Clair River was profiled in February 1987 using a helicopter-borne short-pulse radar operating in the UHF band near 500 MHz. During the same time, measurements of the brash ice depth and water temperature were made from a Coast Guard icebreaker. The returned radar pulses consisted of a strong coherent reflection from the water surface, preceded (and followed) by incoherent returns from the brash ice. The measured waveform time delays were then converted to mean freeboard height of the brash ice pieces above the water surface. Given the mean freeboard height, an estimate of the total brash ice thickness was made. This estimate was greater than the range of the direct shipboard measurements. The difference is believed due to differences between ice porosity above and below the water line, to melting within the ice and to partial submergence of some of the surface pieces. It is concluded that this technique could be used for mapping relative brash ice depth if the complexities of automating waveform analysis could be overcome.
    Type of Medium: Series available for loan
    Pages: iv, 25 Seiten , Illustrationen
    Series Statement: CRREL Report 89-2
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a206868.pdf
    URL: https://hdl.handle.net/11681/9064
    Language: English
    Note: CONTENTS Abstract Preface Introduction Objectives and procedures Equipment Radar Brash ice probe Temperature measurements St. Clair River ice conditions Results and discussion Thickness and temperature Size distribution Radar survey Discussion of errors Porosity Phase state of the ice Partial submergence of individual pieces Spectra of reflected energy Conclusions and recommendations Literature cited Appendix A: Laboratory verification of surface scattering from a simulated ice jam Appendix B: Display of digitized and processed data
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 27
    Series available for loan
    Series available for loan
    Development of an airborne sea ice thickness measurement system and field test results (1989)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-89/19
    In: CRREL Report, 89-19
    Description / Table of Contents: Recent efforts to improve airborne electromagnetic induction- measurement technology and to downsize the related helicopter-towed antenna assembly from about 7.5 m long to about 3.5 m long for use in airborne measurement of sea ice thickness are discussed, as are the results from arctic field testing. Also outlined are the system noise and drift problems encountered during arctic field evaluation, problems that adversely affected the quality of the sounding data. The sea ice sounding results indicate that it should be possible to determine thickness to within 5% for ice floes with moderate relief but that, because of sounding footprint size and current model algorithm constraints, steepsided pressure ridge keels cannot be well defined. The findings also indicate that routine sea ice thickness profiling from an airborne platform is close at hand with further system improvement, as is the apparent capability to determine the conductivity of the sea ice, from which an assessment of sea ice strength can be made.
    Type of Medium: Series available for loan
    Pages: iii, 54 Seiten , Illustrationen
    Series Statement: CRREL Report 89-19
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a224867.pdf
    URL: https://hdl.handle.net/11681/9083
    Language: English
    Note: CONTENTS Abstract Preface Introduction Pre-field-deployment activities Software development System optimization Improvements of the calibration procedure Real-time processing Small bird design and implementation Other improvements Field activities Snow, ice and seawater data AEM surveys Calibration AEM data processing Post-survey results Processing problem Ground truth data Floe freeboard vs thickness analysis AEM sounding results Concluding remarks Literature cited Appendix A: Blowup of Figure 28
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 28
    Series available for loan
    Series available for loan
    Dynamic friction of a metal runner on ice : I. Model sled test (1989)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-89/14
    In: CRREL Report, 89-14
    Description / Table of Contents: The effects of runner material and surface conditions on the friction between runners and ice were studied. A model sled was pushed over a 6-m-long ice sheet and the reduction of speed of the sliding sled was measured. The friction calculated by the reduction of speed between two gates indicated that smooth runners showed lower friction at around -1°C than at around -10°C, as expected, but the friction of rough runners showed little temperature dependence. The lower thermally conductive runners showed lower friction than higher thermally conductive smooth runners as the theory predicted, but such effects were obscured on rougher runners.
    Type of Medium: Series available for loan
    Pages: iii, 23 Seiten , Illustrationen
    Series Statement: CRREL Report 89-14
    URL: https://apps.dtic.mil/docs/citations/ADA211498
    URL: https://hdl.handle.net/11681/9087
    Language: English
    Note: CONTENTS Preface Introduction Apparatus and procedures General approach Sled design Sled propulsion Ice sheet preparation Experimental procedure Results General remarks Effect of runner temperature Effect of runner surface Effect of ice surface conditions Effect of velocity Effect of runner materials Observations of replicate surfaces Statistical analysis Discussion Molecular interactions Mechanical deformations Thermal energy dissipation Hydrodynamidc processes Comparison of energy loss mechanisms Summary and conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 29
    Series available for loan
    Series available for loan
    Mathematical model to correlate frost heave of pavements with laboratory predictions (1980)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-80/10
    In: CRREL Report, 80-10
    Description / Table of Contents: A mathematical model of coupled heat and moisture flow in soils has been developed. The model includes algorithms for phase change of soil moisture and frost heave and permits several types of boundary and initial conditions. The finite element method of weighted residual (Galerkin procedure) was chosen to simulate the spatial regime and the Crank-Nicholson method was used for the time domain portion of the model. To facilitate evaluation of the model, the heat and moisture fluxes were essentially decoupled; moisture flux was then simulated accurately, as were heat flux and frost heave in a laboratory test. Comparison of the simulated and experimental data illustrates the importance of unsaturated hydraulic conductivity. It is one parameter which is difficult to measure and for which only a few laboratory test results are available. Therefore, unsaturated hydraulic conductivities calculated in the computer model may be a significant source of error in calculations of frost heave. The algorithm incorporating effects of surcharge and overburden was inconclusively evaluated. Time-dependent frost penetration and frost heave in laboratory specimens were closely simulated with the model. After 10 days of simulation, the computed frost heave was about 2.3 cm vs 2.0 cm and 2.8 cm in two tests. Frost penetration was computed as 15 cm and was measured at 12.0 cm and 12.2 cm in the two laboratory samples after 10 days.
    Type of Medium: Series available for loan
    Pages: v, 49 Seiten , Illustrationen
    Series Statement: CRREL Report 80-10
    URL: https://apps.dtic.mil/docs/citations/ADA084737
    URL: https://hdl.handle.net/11681/9217
    Language: English
    Note: CONTENTS Abstract Preface Introduction One-dimensional equations of simultaneous heat and moisture flux Moisture transport Heat transport Phase change Coupling effects Frost heave algorithm Development of computer model Finite difference vs finite element method Finite element formulation Time domain solution Evaluation of the mathematical model Heat flux Moisture flux Numerical dispersion Frost heave of homogeneous laboratory samples Conclusions Recommended studies to refine the model Literature cited Appendix A. Work plan, staffing and instrumentation requirements for correlating results oflaboratory frost susceptibility tests with field performance Appendix B. Proposed investigation of thaw weakening of subgrade soil and granular unboundbase course Appendix C. Derivation of finite element system matrices
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 30
    Series available for loan
    Series available for loan
    High-explosive cratering in frozen and unfrozen soils in Alaska (1980)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-80/9
    In: CRREL Report, 80-9
    Description / Table of Contents: Explosive cratering tests were conducted in seasonally frozen and thawed gravel at Ft. Richardson near Anchorage, Alaska, and in seasonallly frozen and thawed silt overlying permafrost and in silt permafrost at Ft. Wainwright near Fairbanks, Alaska. Explosive charge weights ranged from 26 to 3120 lb and charge burial depths ranged from about 3 to 40 ft. The cube root of the charge weight scaling was used to determine maximum scaled crater dimensions and optimum scaled depth of burial of the charge. Test results for frozen and thawed gravel were essentially the same because of the low moisture content and the relatively shallow depth of freezing (5 to 6 ft). The optimum depth of burial of the charge for maximizing the apparent radius and depth and the true radius was about 1.8 times the cube root of the charge weight for both the frozen and thawed conditions. In seasonally frozen silt overlying a talik and silt permafrost the maximum scaled crater dimensions and optimum scaled burial depths of the charge were smaller than for the thawed condition except for the true crater dimensions. The channeling of energy in the talik produces maximum crater dimensions and an optimum burial depth for the true crater that is larger than for the thawed condition. The results for the homogeneous silt permafrost were very similar to the frozen gravel results with much smaller maximum crater dimensions and smaller optimum charge burial depths than for the thawed silt overlying permafrost.
    Type of Medium: Series available for loan
    Pages: v, 21 Seiten , Illustrationen
    Series Statement: CRREL Report 80-9
    URL: https://apps.dtic.mil/docs/citations/ADA084702
    URL: https://hdl.handle.net/11681/9543
    Language: English
    Note: CONTENTS Abstract Preface Metric conversion table Introduction Test sites Test procedures and materials Analysis of test data Mobility tests Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 31
    Series available for loan
    Series available for loan
    Analysis of the performance of a 140-Foot Great Lakes icebreaker : USCGC Katmai Bay (1980)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-80/8
    In: CRREL Report, 80-8
    Description / Table of Contents: This report presents the results of the tests on the new U.S. Coast Guard 140-ft icebreaker Katmai Bay (WTGB-101) in the level plate ice and brash ice in Whitefish Bay and the St. Marys River. The results indicate that the vessel can penetrate 22 in. of level freshwater ice with 2-3 in. of snow cover. It can also penetrate up to 48 in. of brash ice in a continuous mode and at least 30 in. of plate ice by backing and ramming. The installed bubbler system decreased the required power of the vessel from 10 to 30% in brash ice and 25 to 35% in level ice. The low friction coating appears to be effective in decreasing the friction factor when it remains intact; when it peels off it appears to make conditions worse than plain paint. An average dynamic friction factor of 0.15 could be used over the entire hull for these tests.
    Type of Medium: Series available for loan
    Pages: iv, 28 Seiten , Illustrationen
    Series Statement: CRREL Report 80-8
    URL: https://apps.dtic.mil/docs/citations/ADA084736
    URL: https://hdl.handle.net/11681/9522
    Language: English
    Note: CONTENTS Abstract Preface Metric conversion table Introduction Roughness and friction measurements Level plate ice performance Brash ice performance Ramming icebreaking performance Analysis of the data Propulsion efficiency in ice Regression analysis Conclusions and recommendations Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 32
    Series available for loan
    Series available for loan
    Measurement of the shear stress on the underside of simulated ice covers (1980)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-80/24
    In: CRREL Report, 80-24
    Description / Table of Contents: The fluid shear stress applied to the underside of a simulated floating ice cover was measured in a laboratory flume. The measured values were compared with values of the shear stress computed from the von Karman-Prandtl velocity distribution fitted to the velocity profiles measured beneath the cover. For the lower velocity runs (approx 0.079 m/s) the measured and computed values of the shear stress were in close agreement. At the high velocity flows (approx 0.137 m/s) the measured values were roughly one-half those calculated from the velocity distribution. As the underside of the cover became increasingly rougher, the position of maximum velocity moved closer to the bottom of the channel. It was shown that the Darcy friction coefficient is exponentially related to a normalized ice cover thickness, which suggests that it is measure of the roughness of a fragmented ice cover.
    Type of Medium: Series available for loan
    Pages: iv, 11 Seiten , Illustrationen
    Series Statement: CRREL Report 80-24
    URL: https://apps.dtic.mil/docs/citations/ADA094621
    Language: English
    Note: CONTENTS Abstract Preface List of symbols Introduction Experimental apparatus Experimental procedures Analysis of forces Experimental results Analysis of data Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 33
    Series available for loan
    Series available for loan
    Cold regions testing of an air-transportable shelter (1981)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-81/16
    In: CRREL Report, 81-16
    Description / Table of Contents: An air-transportable shelter designed and built at CRREL for use in cold regions underwent testing in Hanover, New Hampshire, and Ft. Greely, Alaska. The shelter demonstrated some of its capabilities for mobility by being towed for more than 60 miles behind various vehicles and by being transported on a C-130 cargo airplane, a CH-47 helicopter, and a trailer truck. The shelter proved to be very easy for a crew of two to four to set up in all weather conditions including -40 F cold. However, the gasoline-powered generator, which was a source for space heat as well as electricity, functioned very poorly. Overall, the prototype successfully demonstrated qualities of self-reliance, ease of operation and thermal efficiency.
    Type of Medium: Series available for loan
    Pages: v, 20 Seiten , Illustrationen
    Series Statement: CRREL Report 81-16
    URL: https://hdl.handle.net/11681/9412
    Language: English
    Note: CONTENTS Abstract Preface Metric conversion factors Summary Introduction Description of shelter Test procedures and results Mobility Ease of erecting and striking Therinal efficiency and performance Heat output Electrical system Habitation Safety features Water system Shelter reliability Structure Performance of other shelters Conclusions Future studies Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 34
    Series available for loan
    Series available for loan
    A statistical evaluation of soil and climatic parameters affecting the change in pavement deflection during thawing of subgrades (1981)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-81/15
    In: CRREL Report, 81-15
    Description / Table of Contents: This report analyzes the results of a field study previously reported by Scrivner et al. (1969) for the National Cooperative Highway Research Program. These authors studied the seasonal pavement deflection characteristics of 24 test sites on roads in service in regions with freezing indexes ranging from 100 F-days to 2100 F-days. They used the Dynaflect cyclic pavement loading device to determine the pavement system response. Of specific interest to my analysis was the increased pavement deflection after freezing and thawing and the time to recovery of normal deflection characteristics. These characteristics were related to soil and climatic factors using statistical techniques. The most significant observations of this statistical analysis are: (1) that the freezing index is not a significant parameter in determining the percent increase in pavement deflection during thawing, and (2) that the recovery time is inversely proportional to the depth of freezing. As was expected, the most significant variable affecting the increase in pavement deflection was the frost susceptibility classification. This observation reinforces the necessity for careful selection of soil materials used in pavement systems.
    Type of Medium: Series available for loan
    Pages: v, 10 Seiten , Ilustrationen
    Series Statement: CRREL Report 81-15
    URL: https://hdl.handle.net/11681/9492
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Description of test site Test results Method of analysis Results of analysis Change in resilient deflection due to thawing, A Recovery time after onset of thawing, t20 Discussion of results Change in resilient deflection due to thawing, A. Recovery time after thawing, t20 Conclusions Literature cited ILLUSTRATIONS Figure Pavement deflection and frost penetration vs time Data points and regression line for A and t2 0 versus F Data points and regression line for A and t2 0 versus W Data points and regression line for A and t2 0 versus I Data points and regression line for A and t20 versus N Data points and regression line for A and t20 versus D Data points and regression line for t20 versus A Permeability vs void ratio for the Toledo Penn 7 material TABLES Properties of test sections Test results from Scrivner et al Results of regression analysis
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 35
    Series available for loan
    Series available for loan
    Prediction of explosively driven relative displacements in rocks (1981)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-81/11
    In: CRREL Report, 81-11
    Description / Table of Contents: Abstract: Relative displacement data from high explosive, shallow-buried bursts in rock are combined with relative displacement data from the contained nuclear explosion MIGHTY EPIC. Analysis of these data yields a preliminary, semi-empirical technique for predicting the location, direction and magnitude of relative displacements in rock from contained explosions. This technique is used to make relative displacement predictions for the DIABLO HAWK nuclear blast.
    Type of Medium: Series available for loan
    Pages: iv, 23 Seiten , Illustrationen
    Series Statement: CRREL Report 81-11
    URL: https://hdl.handle.net/11681/9468
    Language: English
    Note: CONTENTS Abstract Preface Introduction DIHEST analysis MIGHTY EPIC analysis Geological setting and relative displacement documentation Shear stress analysis 8 Displacement analysis DIABLO HAWK predictions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 36
    Series available for loan
    Series available for loan
    On the buckling force of floating ice plates (1981)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-81/9
    In: CRREL Report, 81-9
    Description / Table of Contents: Abstract: The calculation of the largest horizontal force a relatively thin floating ice plate may exert on a structure requires the knowledge of the buckling load for this floating plate. In the published literature on the stability of continuously supported beams and plates, it is usually assumed that this buckling force corresponds to the lowest bifurcation force Pcr. However, recent studies indicate that, generally, this is not the case, and this report clarifies the situation for floating ice plates. This problem is first studied on a simple model that exhibits the buckling mechanism of a floating ice plate but is amenable to an exact nonlinear analysis. This study shows that, depending on the ratio of the rigidities of the "liquid" and "plate," the post-buckling branch may rise or drop away from the bifurcation point. Thus, Pcr may or may not be the actual buckling load. It is also shown that when lift-off of "plate" from the "liquid" takes place the actual buckling load may drop substantially. This study is followed by an analysis of a floating compressed semi-infinite plate with a straight free edge, assuming that there is no lift-off. It is found that for this case there always exists a buckling load that is lower than Pcr. According to the obtained results, the value Pcr should be used with caution as a buckling load for floating ice plates. It is suggested that the buckling load be determined using the postbuckling equilibrium branch of the plate, taking into consideration the possibility of lift-off of the ice cover from the liquid base.
    Type of Medium: Series available for loan
    Pages: 7 Seiten , Illustrationen
    Series Statement: CRREL Report 81-9
    URL: https://hdl.handle.net/11681/9471
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 37
    Series available for loan
    Series available for loan
    Shallow snow model for predicting vehicle performance (1981)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-81/20
    In: CRREL Report, 81-20
    Description / Table of Contents: A historical review of research is presented to establish the state- of-the-art for analyzing the behavior of vehicles in shallow snow. From this review, the most comprehensive and promising model is put together to establish a first-cut performance prediction model for vehicles operating in shallow snow, slush, ice and thawing soils.
    Type of Medium: Series available for loan
    Pages: iv, 21 Seiten , Illustrationen
    Series Statement: CRREL Report 81-20
    URL: https://hdl.handle.net/11681/9422
    Language: English
    Note: CONTENTS Abstract Preface List of symbols Introduction Historical review Model selection Traction Resistance Slush and thawing soils Ice, hard-packed snow, packed snow River and lake ice Model use Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 38
    Series available for loan
    Series available for loan
    Near-infrared reflectance of snow-covered substrates (1981)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-81/21
    In: CRREL Report, 81-21
    Description / Table of Contents: The reflection of solar radiation by a snow cover in situ and the apparent influence of selected substrates were examined in wavelength bands centered at 0.81, 1.04, 1.10, 1.30, 1.50 and 1.80 micrometers. Substrates included winter wheat, timothy, corn, alfalfa, grass, concrete and subsurface layers of 'crusty' snow and ice. Reasonable qualitative agreement between measurements and theoretical predictions was demonstrated, with indications of quantitative agreement in the definition of a 'semi-infinite depth' of snow cover. It was concluded that ultimate quantitative agreement between theory and measurement will require that an 'optically effective grain size' be defined in terms of physically measuarable dimensions or meteorologically predictable characteristics of the ice crystals composing the snowpack.
    Type of Medium: Series available for loan
    Pages: iii, 17 Seiten , Illustrationen
    Series Statement: CRREL Report 81-21
    URL: https://hdl.handle.net/11681/9419
    Language: English
    Note: CONTENTS Abstract Preface Introduction Experimental method Substrate preparation Experimental configuration Radiometric measurements Snow characterization Reflectance standards Data analysis Reflectance measurements Snow replica analysis Discussion of results Comparative reflectance of various substrates under snow Ablation of a snow cover Reflectance from a very light, fresh snow cover Measurements at angles other than vertical Reflectance from substrates Concluding observations Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 39
    Series available for loan
    Series available for loan
    Application of the heat balance integral to conduction phase change problems (1981)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-81/25
    In: CRREL Report, 81-25
    Description / Table of Contents: The problem of heat conduction with phase changeAoften called the Stefan problemrincludes some of the mostintractable mathematical areas of heat transfer. Exact solutions are extremely limited and approximate methodsare widely used. This report discusses the collocation method for the heat balj ce integral approximation. The methodis applied to some standard problems of phase change-Neumann's problem-and a new solution is presented for thecase of surface convection for a semi-infinite body. Numerical results are given for soil systems and also for materialsof interest in latent heat thermal storage.
    Type of Medium: Series available for loan
    Pages: v, 14 Seiten , Illustrationen
    Series Statement: CRREL Report 81-25
    URL: https://hdl.handle.net/11681/9434
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Conversion factors Introduction Collocation method Neumann problem Specified surface heat flux Convective surface heat flux Insulated semi-infinite body Conclusion Literature cited Appendix A: Program listing for numerical quadrature of equation 28
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 40
    Series available for loan
    Series available for loan
    Breakup of solid ice covers due to rapid water level variations (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/3
    In: CRREL Report, 82-3
    Description / Table of Contents: The conditions that lead to initial breakup of a solid ice on a river due to rapid water level variations are analyzed. The analysis is based on the theory of beams on an elastic foundation. First cracking is assumed to occur when the bending moment induced in the ice cover by the wave exceeds the flexural strength of the ice cover.
    Type of Medium: Series available for loan
    Pages: iv, 17 Seiten , Illustrationen
    Series Statement: CRREL Report 82-3
    URL: https://hdl.handle.net/11681/9448
    Language: English
    Note: CONTENTS Abstract Preface Symbols Introduction Purpose of the study Stating the problem Fracturing of the ice cover due to the passage of surge waves Basic assumptions Derivation of the bending moments Determination of the wave characteristics Deflection of the ice Discussion and field observations Summary Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 41
    Series available for loan
    Series available for loan
    On the temperature distribution in an air-ventilated snow layer (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/5
    In: CRREL Report, 82-5
    Description / Table of Contents: The problem of simultaneous heat and mass transfer in a homogeneous snow layer, with one side kept at its initial temperature and the other side with a step temperature increase, was solved for the case of constant through-flow conditions. An experimentally determined effective thermal conductivity function, i.e. Ke = 0.0014 + 0.58 G (where G is dry mass flow rate of air in g/sq cm-s), was employed in the solution. The computed nondimensional temperature distribution agreed quite well with experimental data taken under pseudo-steady state conditions with the exception of the temperature for the lowest flow rate used in the experiment. The pronounced nonlinearity of the temperature distribution was found to be a strong function of the flow rate. For sinusoidal variation of atmospheric pressure, the responding flow in the snow medium was also found to be sinusoidal. In conjunction with the diurnal temperature change, this variation facilitated the process of repeated sublimation and condensation in alternate directions and thereby produced a surface layer of approximately constant snow density.
    Type of Medium: Series available for loan
    Pages: v, 10 Seiten , Illustrationen
    Series Statement: CRREL Report 82-5
    URL: https://hdl.handle.net/11681/9450
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 42
    Series available for loan
    Series available for loan
    Sea ice drag laws and simple boundary layer concepts, including application to rapid melting (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/4
    In: CRREL Report, 82-4
    Description / Table of Contents: Several proposed methods for treating the momentum flux between drifting sea ice and the underlying ocean are interpreted in terms of simple planetary-boundary-layer (PBL) turbulence theory. The classical two-layer approach, in which the solution for a thin surface layer is matched to an Ekman solution for the outer layer, is used to derive several forms of the drag law. These forms range from linear (where stress is proportional to relative speed), through quadratic (where stress is proportional to relative speed squared), to a Rossby-similarity law like that used to express frictional drag on geostrophic wind in the atmosphere. Only formulations which conform with Rossby-similarity scaling are consistent with free-drift data from the 1975 AIDJEX drift station experiment.
    Type of Medium: Series available for loan
    Pages: iv, 17 Seiten , Illustrationen
    Series Statement: CRREL Report 82-4
    URL: https://hdl.handle.net/11681/9447
    Language: English
    Note: CONTENTS Abstract Preface Background Hierarchy of drag laws and simple models The momentum equation for the planetary boundary layer Linear eddy viscosity - the constant stress layer Two-layer eddy viscosity PBL scaling A dimensionless two-layer system A dimensionless two-layer system with modified stress Evaluating the drag laws Rossby similarity parameters and buoyancy effects Discussion Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 43
    Series available for loan
    Series available for loan
    Bering Strait sea ice and the Fairway Rock icefoot (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/31
    In: CRREL Report, 82-31
    Description / Table of Contents: Information on sea ice conditions in the Bering Strait and the icefoot formation around Fairway Rock, located in the strait, is presented. Cross-sectional profiles of Fairway Rock and the relief of the icefoot are given along with theoretical analyses of the possible forces active during icefoot formation. It is shown that the ice cover most likely fails in flexure as opposed to crushing or buckling, as the former requires less force. Field observations reveal that the Fairway Rock icefoot is massive, with ridges up to 15 m high, a seaward face only 20 degrees from vertical, and interior ridge slopes averaging 33 degrees. The icefoot is believed to be grounded and its width ranges from less than 10 to over 100 m.
    Type of Medium: Series available for loan
    Pages: 44 Seiten , Illustrationen
    Series Statement: CRREL Report 82-31
    URL: https://apps.dtic.mil/docs/citations/ADA122477
    URL: https://hdl.handle.net/11681/9317
    Language: English
    Note: CONTENTS Abstract Preface Introduction Bering Strait Field reconnaissance Estimation of ice forces on Fairway Rock 1. Creep deformation 2. Crushing failure 3. Flexural failure 4. Forces required to form floating or grounded pressure ridges along therock or to pile ice on the beaches 5. Buckling failure Driving forces Angle of internal friction of sea ice Summary Literature cited Appendix A: April 1982 field observations at Fairway Rock
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 44
    Series available for loan
    Series available for loan
    Fluid dynamic analysis of volcanic tremor (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/32
    In: CRREL Report, 82-32
    Description / Table of Contents: Low-frequency (10 Hz) volcanic earthquakes originate at a wide range of depths and occur before, during, and after magmatic eruptions. The characteristics of these earthquakes suggest that they are not typical tectonic events. Physically analogous processes occur in hydraulic fracturing of rock formations, low-frequency icequakes in temperate glaciers, and autoresonance in hydroelectric power stations. We propose that unsteady fluid flow in volcanic conduits is the common source mechanism of low-frequency volcanic earthquakes (tremor). The fluid dynamic source mechanism explains low-frequency earthquakes of arbitrary duration, magnitude, and depth of origin, as unsteady flow is independent of physical properties of the fluid and conduit. Fluid transients occur in both low-viscosity gases and high-viscosity liquids. A fluid transient analysis can be formulated as generally as is warranted by knowledge of the composition and physical properties of the fluid, material properties, geometry and roughness of the conduit, and boundary conditions. To demonstrate the analytical potential of the fluid dynamic theory, we consider a single-phase fluid, a melt of Mount Hood andeside at 1250 deg C, in which significant pressure and velocity variations occur only in the longitudinal direction.
    Type of Medium: Series available for loan
    Pages: 15 Seiten , Illustrationen
    Series Statement: CRREL Report 82-32
    URL: https://apps.dtic.mil/docs/citations/ADA122778
    URL: https://hdl.handle.net/11681/9375
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 45
    Series available for loan
    Series available for loan
    Properties of urea-doped ice in the CRREL test basin (1983)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-83/8
    In: CRREL Report, 83-8
    Description / Table of Contents: In the course of model tests with urea-doped ice in the CRREL Ice Engineering Facility test basin, the growth process and the physical and mechanical properties of the model ice were investigated. The parameters which were varied were: urea concentration in the tank water, air temperature during growth, growth duration, and tempering time. Uniformity of ice thickness and ice mechanical properties over the whole tank area were found to be satisfactory. The structure of the urea-doped ice was found to be similar to that of the ice except for a relatively thick incubation layer over a dendritic bottom layer. Empirical relationships were established between: ice thickness and negative degree-hours; mechanical properties and growth temperature, urea concentration, and ice thickness; and reduction in mechanical properties and tempting time. The results of the study are presented in charts which permit reliable scheduling of model tests with required ice thickness and ice flexural strength.
    Type of Medium: Series available for loan
    Pages: vii, 53 Seiten , Illustrationen
    Series Statement: CRREL Report 83-8
    URL: https://apps.dtic.mil/docs/citations/ADA128219
    URL: https://hdl.handle.net/11681/9315
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Experimental facility and procedures Ice test basin Ice growth procedure Measurements Ice growth and structure Ice thickness distribution Ice growth during freeze-up Ice growth during warm-up Structure of urea-doped ice Mechanical properties of urea-doped ice Introductory remarks Model of a two-layer elastic material Properties of urea-doped ice during freeze-up Properties of urea-doped ice during warm-up Applications to test program scheduling Summary and conclusions Literature cited Appendix A: Results of ice thickness measurements for various growth conditions Appendix B: Properties of untempered ice Appendix C: Properties of tempered ice
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 46
    Series available for loan
    Series available for loan
    Evaluation of procedures for determining selected aquifer parameters (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/41
    In: CRREL Report, 82-41
    Description / Table of Contents: Many of the important factors influencing the choice of appropriate aquifer test procedures are presented. The concepts of bias, accuracy and spatial variabil­ity are explained. The definitions of a number of aquifer parameters are devel­oped from basic principles demonstrating the underlying assumptions and limita­tions. The parameters considered are: piezometric head, hydraulic conductiv­ity/intrinsic permeability, flow direction, specific discharge magnitude, transmissivity, volumetric flow rate, total porosity, effective porosity, aver­age linear velocity, storage coefficient, specific yield, dispersion coefficient-aquifer dispersivity. For each parameter several techniques are described, evaluated and ranked in terms of perceived potential accuracy, simplicity and value to contaminant transport studies. It must be stressed, however, that the evaluations are based principally upon theoretical grounds, and not upon actual conduct of the described procedures.
    Type of Medium: Series available for loan
    Pages: iv, 111 Seiten , Illustrationen
    Series Statement: CRREL Report 82-41
    URL: https://cdm16021.contentdm.oclc.org/digital/collection/p266001coll1/id/7365/rec/1
    URL: https://hdl.handle.net/11681/9322
    Language: English
    Note: CONTENTS Abstrac Preface Introduction Purpose Scope Concept of accuracy Test selection Definition of parameters Piezometric head Use of piezometers Hydraulic conductivity Flow direction Specific discharge magnitude Transmissivity Volumetric flow rate Porosity Average linear velocity Storage coefficient-specific yield Aquifer dispersivity Parameter estimation techniques Piezometric head Hydraulic conductivity Direction and magnitude of specific discharge vector Transmissivity Volumetric flow rate Total porosity Average linear velocity Storage coefficient Specific yield Effective porosity Aquifer dispersivity-dispersion coefficients Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 47
    Series available for loan
    Series available for loan
    Analysis of a diffusion wave flow routing model with application to flow in tailwaters (1983)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-83/7
    In: CRREL Report, 83-7
    Description / Table of Contents: Peak power generation with hydropower creates tailwater flow conditions characterized by high and low flows with abrupt transitions between these states. Flows occurring in tailwaters typically form sharp-fronted, large-amplitude waves of relatively short period. An understanding of the mechanics of downstream propagation of these waves is important both for direct application in studies of the tailwater and because of the similarity of these waves to those following a dam break. An analysis of the dynamic equations of open channel flow is used to quantify the relative importance of flow wave convection, diffusion and dispersion in rivers. The relative importance of each process is re­lated to the relative magnitude of terms in the dynamic equations, providing a physical basis for model formulation. A one-dimensional diffusion wave flow routing model, modified for tailwaters, simulates the important physical pro­cesses affecting the flow and is straightforward to apply. The model is based upon a numerical solution of the kine­matic wave equation. The “modified equation,” Hirt, and von Neumann analyses are used to gain insight into the stability and dissipative and dispersive behavior of the numerical solution, and results of these analyses are compared. A set of linear routings is used to demonstrate the dissipative and dispersive behavior predicted by the analyses and to verify the accuracy of an expression that quantifies the numerical diffusion of the model. The analyses provide a basis for selection of numerical parameters for model applications. The capability and accuracy of the model are enhanced when physical wave diffusion is balanced by numerical diffusion in the model. Maintaining the diffusion balance re­quires that the time derivative weighting parameter 0 be variable and in some instances negative. Though some amount of phase error is introduced, negative 0 values have no adverse effect upon model stability. Field studies were con­ducted to demonstrate the benefits of careful model development and analysis, and to verify the diffusion wave model for rapidly varying tailwater flow. The bed slope and roughness characteristics of the field study reaches (below Apalachia and Norris Dams) differ greatly, spanning those of a large number of rivers of practical interest. The accurate simulation of flow in both of these tailwaters attests to the soundness of both the physical basis of the model and the numerical solution technique. The field studies confirm, for the extreme case of rapidly varying flow in a mildly sloped river, that inertia has a negligible effect upon unsteady flow waves at low Froude numbers. Additionally, these studies verify that diffusion of short-period waves in rivers is generally significant.
    Type of Medium: Series available for loan
    Pages: vi, 41 Seiten , Illustrationen
    Series Statement: CRREL Report 83-7
    URL: https://cdm16021.contentdm.oclc.org/digital/collection/p266001coll1/id/7006/rec/1
    URL: https://hdl.handle.net/11681/9313
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Physical diffusion and dispersion in open channel flow Modeling approach Description of the diffusion wave flow routing model Analysis of the numerical model Modified equation and Hirt analyses of diffusion wave model von Neumann analysis of the diffusion wave model Linear case studies Accuracy considerations of the numerical solution Field studies Apalachia Dam tailwater Norris Dam tailwater Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 48
    Series available for loan
    Series available for loan
    Dynamic ice-structure interaction during continuous crushing (1983)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-83/5
    In: CRREL Report, 83-5
    Description / Table of Contents: This report presents the results of dynamic ice-structure interaction model tests conducted at the CRREL Ice Engineering Facility. A flexible, single-pile, bottom-founded offshore structure was simulated by a test pile with about a one-to-ten scale ratio. Urea (instead of sodium chloride) was used as dopant to scale down the ice properties, resulting in good model ice properties. Six ice fields were frozen and 18 tests carried out. In all cases distinctive dynamic ice structure interaction vibrations appeared, from which abundant data were collected. In tests with linear ice velocity sweep, sawtooth-shaped ice force fluctuations occurred first. With increasing velocity the natural modes of the test pile were excited, and shifts from one mode to another occurred. The maximum ice force values appeared mostly with low loading rates, but high forces appeared random'y at high ice velocities. As a general trend, ice force maximums, averages and standard deviations decreased with increasing ice velocities. The aspect ratio effect of the ice force in continuous crushing follows the same dependence as in static loadings. The frequency of observed ice forces is strongly dominated by the natural modes of the structure. Dynamically unstable natural modes tend to make the developing ice force frequencies the same as the natural frequencies. Otherwise the resulting frequency depends directly on structural stiffness and ice velocity and inversely on the ice force range. During vibrations the displacement rates of the structure overcome the velocity of ice, making low loading rates and hence high ice forces possible. During crushing, ice induces both positive and negative damping.
    Type of Medium: Series available for loan
    Pages: iv, 53 Seiten , Illustrationen
    Series Statement: CRREL Report 83-5
    URL: https://apps.dtic.mil/docs/citations/ADA126349
    URL: https://hdl.handle.net/11681/9311
    Language: English
    Note: CONTENTS Abstract Preface Introduction Test arrangements Ice properties Crushing patterns Maximum ice force vs velocity Dynamic aspect ratio effect and crushing strength Measured ice force frequencies Calculated ice force frequencies Accelerations, velocities and displacements Damping Ice-induced negative damping Limit cycles Buckling load Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 49
    Series available for loan
    Series available for loan
    Window performance in extreme cold (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/38
    In: CRREL Report, 82-38
    Description / Table of Contents: Extreme cold causes heavy buildup of frost, ice and condensation on many windows. It also increases the incentive for improving the airtightness of windows against heat loss. Our study shows that tightening specifications for Alaskan windows to permit only 30% of the air leakage allowed by current American airtightness standards is economically attractive. We also recommend triple glazing in much of Alaska to avoid window icing in homes and barracks. We base our conclusions on a two-year field study of Alaskan military bases that included recording humidity and temperature data, observing moisture accumulation on windows and measuring airtightness with a fan pressurization device.
    Type of Medium: Series available for loan
    Pages: v, 26 Seiten , Illustrationen
    Series Statement: CRREL Report 82-38
    URL: https://apps.dtic.mil/docs/citations/ADA124528
    URL: https://hdl.handle.net/11681/9333
    Language: English
    Note: Contents Abstract Preface Nomenclature Introduction Previous work in cold weather window performance Investigation Data acquisition and analysis Modeling the window thermal regime Moisture and ice observations Airtightness testing and analysis Annual heat loss from air leakage Results and conclusions Moisture on windows Airtightness Airtightness economics Recommendations for windows in extreme cold Airtightness Multiple glazing Literature cited Appendix A: Moisture levels and airtightness Appendix B: Dewpoint data Appendix C: Sample observations of icing
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 50
    Series available for loan
    Series available for loan
    Landsat-assisted environmental mapping in the Arctic National Wildlife Refuge, Alaska (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/37
    In: CRREL Report, 82-37
    Description / Table of Contents: This report presents a Landsat-derived land cover map of the northwest portion of the Arctic National Wildlife Refuge, Alaska. The report is divided into two parts. The first is devoted to the land cover map with detailed descriptions of the mapping methods and legend. The second part is a description of the study area. The classification system used for the maps is an improvement over existing methods of describing tundra vegetation. It is a comprehensive method of nomenclature that consistently applies the same criteria for all vegetation units. It is applicable for large- and small-scale mapping and is suitable for describing vegetation complexes, which are common in the patterned-ground terrain of the Alaskan Arctic. The system is applicable to Landsat-derived land cover classifications. The description of the study area focuses on five primary terrain types: flat thaw-lake plains, hilly coastal plains, foothills, mountainous terrain, and river flood plains. Topography, landforms, soils and vegetation are described for each terrain type. The report also contains area summaries for the Landsat-derived map categories. The area summaries are generated for the five terrain types and for the 89 townships within the study areas. Two land cover maps at 1:250,000 are included.
    Type of Medium: Series available for loan
    Pages: 68 Seiten , Illustrationen, 2 Karten
    Series Statement: CRREL Report 82-37
    URL: https://cdm16021.contentdm.oclc.org/digital/collection/p266001coll1/id/7051
    URL: https://hdl.handle.net/11681/9332
    Language: English
    Note: CONTENTS Abstract Preface Foreword Introduction A land cover map of the ANWR study area Legend development Mapping method Results Discussion Description of the ANWR study area General description Description of specific terrain types Conclusions Literature cited Appendix A: Descriptions of Landsat land cover categories for ANWR Appendix B: Area summaries Appendix C: Aproximate equivalent units in several systems of land cover, wetland and vegetation classifications used in northern Alaska Appendix D: Soil taxonomy Appendix E: Summary of principal Landsat land cover categories within the terrain types of the ANWR study area
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 51
    Series available for loan
    Series available for loan
    Long-term modifications of perennially frozen sediment and terrain at East Oumalik, northern Alaska (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/36
    In: CRREL Report, 82-36
    Description / Table of Contents: Camp construction and drilling activities in 1950 at the East Oumalik drill site in northern Alaska caused extensive degradation of ice-rich, perennially frozen silt and irreversible modification of the upland terrain. In a study of the long-term degradational effects at this site, the near-surface geology was defined by drilling and coring 76 holes (maximum depth of 34 m) in disturbed and undisturbed areas and by laboratory analyses of these cores. Terrain disturbances, including bulldozed roads and excavations, camp structures and off-road vehicle trails, were found to have severely disrupted the site's thermal regime. This led to a thickening of the active layer, melting of the ground ice, thaw subsidence and thaw consolidation of the sediments. Slumps, sediment gravity flows and collapse of materials on slopes bounding thaw depressions expanded the degradation laterally, with thermal and hydraulic erosion removing materials as the depressions widened and deepened with time. Degradational processes became less active after thawed sediments thickened sufficiently to slow the increase in the depth of thaw and permit slope stabilization. The site's terrain is now irregular and hummocky with numerous depressions. Seasonal thaw depths are deeper in disturbed areas than in undisturbed areas and reflect the new moisture conditions and morphology. The severity of disturbance is much greater at East Oumalik than at another old drill site, Fish Creek. The difference results primarily from differences in the physical properties of the sediments, including the quantity and distribution of ground ice.
    Type of Medium: Series available for loan
    Pages: 42 Seiten , Illustrationen
    Series Statement: CRREL Report 82-36
    URL: https://apps.dtic.mil/docs/citations/ADA123731
    URL: https://hdl.handle.net/11681/9330
    Language: English
    Note: CONTENTS Abstract Preface Summary Introduction Methodology Geologic setting Camp construction and occupation Types of disturbance Degradational processes and the effective area of impact Areal effects of disturbance Topography Groundwater, surface water and drainage Sediment properties and near-surface stratigraphy Surficial processes Depth of thaw Comparison to Fish Creek Discussion and conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 52
    Series available for loan
    Series available for loan
    Statistical aspects of ice gouging on the Alaskan Shelf of the Beaufort Sea (1983)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-83/21
    In: CRREL Report, 83-21
    Description / Table of Contents: The probability density function of the gouge depths into the sediment is represented by a simple negative exponential over four decades of gouge frequency. The exceedance probability function is, therefore, e to the -lambda d, where d is the gouge depth in meters and lambda is a constant. The value of lambda shows a general decrease with increasing water depth, from 9/m in shallow water to less than 3/m in water 30 to 35 m deep. The deepest gouge observed was 3.6 m, from a sample of 20,354 gouges that have depths greater than or equal to 0.2 m. The dominant gouge orientations are usually unimodal and reasonably clustered, with the most frequent alignments roughly parallel to the general trend to the coastline. The value of N(bar) sub 1, the mean number of gouges (deeper than 0.2 m) per kilometer measured normal to the trend of the gouges, varies from 0.2 for protected lagoons to 80 in water between 20 and 38 m deep in unprotected offshore regions. The distribution of the spacings between gouges as measured along a sampling track is a negative exponential. The form of the frequency distribution of N sub 1 varies with water depth and is exponential for lagoons and shallow offshore areas, previously skewed for 10 to 20 m depths off the barrier islands, and near-normal for deeper water. As a Poisson distribution gives a reasonable fit to the N sub 1 distributions for all water depths, it is suggested that gouging can be taken as approximating a Poisson process in both space and time. The distributions of the largest values per kilometer of gouge depths, gouge widths, and the heights of the lateral embankment of sediments plowed from the gouges are also investigated.
    Type of Medium: Series available for loan
    Pages: 40 Seiten , Illustrationen, 1 Karte
    Series Statement: CRREL Report 83-21
    URL: https://apps.dtic.mil/docs/citations/ADA134428
    URL: https://hdl.handle.net/11681/9302
    Language: English
    Note: CONTENTS Abstract Preface Introduction Background and environmental setting Data collection and terminology Data analysis Gouge depths Gouge orientation Gouge frequency Extreme value analysis Applications to offshore design Gouge depth Extreme value statistics Burial depths Conclusion Literature cited Appendix A: Detailed bathymetric map of the Alaskan portion of the Beaufort Sea
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 53
    Series available for loan
    Series available for loan
    Ice forces on model bridge piers (1983)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-83/19
    In: CRREL Report, 83-19
    Description / Table of Contents: Small-scale laboratory experiments were conducted on model bridge piers in the CRREL test basin. The experiments were performed by pushing model ice sheets against structures and monitoring the ice forces during the ice/structure interaction. The parameters, varied during the test program, were the geometry of the bridge piers and the velocity, thickness, and flexural strength of the ice. The results are presented in the form of ice forces on sloping and vertical structures with different geometries. During ice action on sloping structures, a phenomenon of transition of failure mode from bending to crushing was observed as the ice velocity was steadily increased.
    Type of Medium: Series available for loan
    Pages: 17 Seiten , Illustrationen
    Series Statement: CRREL Report 83-19
    URL: https://apps.dtic.mil/docs/citations/ADA133082
    URL: https://hdl.handle.net/11681/9300
    Language: English
    Note: CONTENTS Abstract Preface Introduction Tests Results Ice forces on inclined structures Transition of ice action due to velocity increase Aspect ratio Bridge pier nose geometry Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 54
    Series available for loan
    Series available for loan
    Detection of cavities under concrete pavement (1983)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-83/18
    In: CRREL Report, 83-18
    Description / Table of Contents: An evaluation of an impulse radar system for detecting cavities under concrete pavement is discussed, and field results are presented. It was found that a dual antenna mode of surveying was ideal for void detection. In this mode one antenna operated in a transceive mode and a second, offset from the first, operated in a receive-only mode. This arrangement allowed a refraction-type profile survey to be performed, which enabled subpavement voids to be easily detected. Field trails were held at Plattsburgh Air Force Base, where 28 cavities were detected and mapped. Drilling of holes verified that a cavity existed and allowed cavity depth to be measured. The cavities varied from 1.5 in. to 23 in, depth and were up to 20 ft. long.
    Type of Medium: Series available for loan
    Pages: 49 Seiten , Illustrationen
    Series Statement: CRREL Report 83-18
    URL: https://cdm16021.contentdm.oclc.org/digital/collection/p266001coll1/id/7120/rec/1
    URL: https://hdl.handle.net/11681/9301
    URL: https://apps.dtic.mil/docs/citations/ADA131851
    Language: English
    Note: CONTENTS Abstract Preface Introduction Plattsburgh Air Force Base Radar sounding system Survey procedure Cavity inspection Radar cavity detection test Radar profile results Falling-weight deflectometer tests Discussion and conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 55
    Series available for loan
    Series available for loan
    Computer models for two-dimensional transient heat conduction (1983)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-83/12
    In: CRREL Report, 83-12
    Description / Table of Contents: This paper documents the development and verification of two finite difference models that solve the general two-dimensional form of the heat conduction equation, using the alternative-direction implicit method. Both can handle convective, constant flux, specified temperature and semi-infinite boundaries. The conducting medium may be composed of many materials. The first program, ADI, solves for the case where no change of state occurs. ADIPC solves for case where a freeze/thaw change of phase may occur, using the apparent heat capacity method. Both models are verified by comparison to analytical results.
    Type of Medium: Series available for loan
    Pages: 74 Seiten , Illustrationen
    Series Statement: CRREL Report 83-12
    URL: https://apps.dtic.mil/docs/citations/ADA134893
    URL: https://hdl.handle.net/11681/9334
    Language: English
    Note: CONTENTS Abstract Preface Introduction Finite differences applied to heat transfer Heat conduction equation Boundary conditions Phase change Computer program ADDATA, the data subroutine TRIDIG, the matrix solver ISOTHM, the isotherm finider ADI, main program ADEPC, main program Verification of ADI Comparison of ADI with analytical results Comparison of ADI with experimental results Verification of ADIPC Comparison of ADIPC with analytical results-the Neumann solution Comparison of ADIPC with analytical results-two-dimensional phase change verification User instruction for ADI User instruction for ADIPC Conclusions Literature cited Appendix A. Program INFSUM and sample input and output for program ADI Appendix B. Program ADIPC and sample input and output
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 56
    Series available for loan
    Series available for loan
    Review of the propagation of inelastic pressure waves in snow (1983)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-83/13
    In: CRREL Report, 83-13
    Description / Table of Contents: A review on past experimental and theoretical work indicates a need for additional experimentation to characterize the response of snow to inelastic pressure waves. Pressure data from previously conducted explosion tests are analyzed to estimate the elastic limit of snow of 400 -kg/cu m density to be about 36 kPa. This pressure corresponds to a scaled distance of 1.6 m/cu.rt.kg for charges fired beneath the surface of the snow, and to a scaled distance of 1.2 m/cu.rt.kg for charges fired in the air. The effects of a snow cover on the method of clearing a minefield by using an explosive charge fired in the air above the snow surface are also discussed and recommendations are given for further work in this area. Explosive pressure data are used to estimate the maximum effective scaled radius for detonating buried mines at shallow depth to be 0.8 m/cu.rt.kg. Fuel-air explosive will increase this effective radius significantly because of the increase in the size of the source region.
    Type of Medium: Series available for loan
    Pages: 33 Seiten , Illustrationen
    Series Statement: CRREL Report 83-13
    URL: https://apps.dtic.mil/docs/citations/ADA128714
    URL: https://hdl.handle.net/11681/9335
    Language: English
    Note: CONTENTS Abstract Preface List of symbols Introduction Objectives Background Problems in describing the response of snow to an applied stress Methods of determining the dynamic behavior of materials Review of previous studies on snow Experimental measurements on snow Summary of snow experiments Theoretical studies Confirmation of the theory Discussion Applications Recommendations Summary Literature cited Appendix A. Selected data from Wisotski and Snyder (1966) Appendix B. Pressure data from Livingston (1964)
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 57
    Series available for loan
    Series available for loan
    A study on the tensile strength of ice as a function of grain size (1983)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-83/14
    In: CRREL Report, 83-14
    Description / Table of Contents: An analysis of ice fracture that incorporates dislocation mechanics and linear elastic fracture mechanics is discussed. The derived relationships predict a brittle to ductile transition in polycrystalline ice under tension with a Hall-Petch type dependence of brittle fracture strength on grain size. A uniaxial tensile testing technique, including specimen preparation and loading system design was developed and employed to verify the model. The tensile strength of ice in purely brittle fracture was found to vary with the square root of the reciprocal of grain size, supporting the relationship that the theory suggests. The inherent strength of the ice lattice and the Hall-Petch slope are evaluated and findings discussed in relation to previous results. Monitoring of acoustic emissions was incorporated in the tests, providing insights into the process of microfracture during ice deformation.
    Type of Medium: Series available for loan
    Pages: 43 Seiten , Illustrationen
    Series Statement: CRREL Report 83-14
    URL: https://apps.dtic.mil/docs/citations/ADA134889
    URL: https://hdl.handle.net/11681/9340
    Language: English
    Note: CONTENTS Abstract Preface Introduction Background Development of testing technique Test specimens Tensile testing Compression testing Experimental results Tensile tests Compression tests Discussion Conclusions Suggestions for further work Literature cited Appendix A: Additional information on seed grains Appendix B: Thin-sectioning procedure Appendix C: Displacement transducer calibration
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 58
    Series available for loan
    Series available for loan
    Developing a model for predicting snowpack parameters affecting vehicle mobility (1983)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-83/16
    In: CRREL Report, 83-16
    Description / Table of Contents: The presence of snow on the ground can impose limitations on the mobility of wheeled and tracked vehicles. Snow depth and density are the two most easily measured snow properties that can be related to mobility over snow. Existing models of snowpack accumulation and ablation processes and models of internal snowpack structure were examined to determine if a model of the snowpack can be developed for use in predicting the snow parameters that affect mobility. Simple models, such as temperature index models, do not provide sufficient snowpack details, and the more detailed models require too many measured inputs. Components of the various models were selected from a basis of a snowpack model for predicting snow properties related to mobility over snow. Methods of obtaining the input data from some components are suggested, and areas where more development is needed are described.
    Type of Medium: Series available for loan
    Pages: 34 Seiten , Illustrationen
    Series Statement: CRREL Report 83-16
    URL: https://apps.dtic.mil/docs/citations/ADA134878
    URL: https://hdl.handle.net/11681/9338
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Conversion of metric units Introduction Review of existing models Accumulation models Ablation models Using existing models for studying mobility Proposed snowpack model for mobility studies Model components Implementation of the model Developing input data Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 59
    Series available for loan
    Series available for loan
    A comparison of sea ice model results using three different wind forcing fields (1983)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-83/17
    In: CRREL Report, 83-17
    Description / Table of Contents: A sea ice model was applied to the East Greenland Sea to examine a 60-day ice advance period beginning 1 October 1979. This investigation compares model results using driving geostrophic wind fields derived from three sources. Winds calculated from sea-level pressures obtained from the National Weather Service's operational analysis system resulted in strong velocities concentrated in a narrow band adjacent to the Greenland coast, with moderate velocities elsewhere. The model showed excessive ice transport and thickness build-ups in the coastal region. The extreme pressure gradient parallel to the coast resulted partially from a pressure reduction procedure that was applied to the terrain-following sigma coordinate system to obtain sea-level pressures. Additional sea-level pressure fields were obtained from an independent optimal interpolation analysis that merged FGGE buoys drifting in the Arctic basin with high latitude land stations and from manual digitization of the NWS hand-analyzed Northern Hemisphere Surface Charts. Modeling results using winds from both of these fields agreed favorably.
    Type of Medium: Series available for loan
    Pages: 19 Seiten , Illustrationen
    Series Statement: CRREL Report 83-17
    URL: https://apps.dtic.mil/docs/citations/ADA134462
    URL: https://hdl.handle.net/11681/9339
    Language: English
    Note: CONTENTS Abstract Preface Introduction Description of study Model results The problem Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 60
    Series available for loan
    Series available for loan
    Radar profiling of buried reflectors and the groundwater table (1983)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-83/11
    In: CRREL Report, 83-11
    Description / Table of Contents: Investigations of ground radar performance over thawed and seasonally frozen silts, and sands and gravels containing artificial and natural reflectors were carried out in Alaska. The radar emitted 5-10 ns pulses, the center frequency of which was approximately 150 MHz. The artificial reflectors were metal sheets and discs and the natural reflectors were the groundwater table and interfaces between frozen and thawed material. The water table was profiled at three sites where the subsurface material was coarse-grained alluvium. Dielectric constants of 16 to 18 were measured for the thawed silts, 6 to 7 for the frozen silts and 3 to 9 for the sands and gravels. Signal penetration in the thawed high moisture content silts may be achieved only by use of a lower frequency radar, whereas in the sands and gravels greater depths may be detected with more sophisticated signal processing.
    Type of Medium: Series available for loan
    Pages: 16 Seiten , Illustrationen
    Series Statement: CRREL Report 83-11
    URL: https://apps.dtic.mil/docs/citations/ADA130225
    URL: https://hdl.handle.net/11681/9337
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 61
    Series available for loan
    Series available for loan
    Stress measurements in ice (1983)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-83/23
    In: CRREL Report, 83-23
    Description / Table of Contents: The problems associated with measuring stresses in ice are reviewed. Theory and laboratory test results are then presented for a stiff cylindrical sensor made of steel that is designed to measure ice stresses in a biaxial stress field. Loading tests on freshwater and saline ice blocks containing the biaxial ice stress sensor indicate that the sensor has a resolution of 20 kPa and an accuracy of better than 15% under a variety of uniaxial and biaxial loading conditions. Principal stress directions can also be determined within 5 degrees. The biaxial ice stress sensor is not significantly affected by variations in the ice elastic modulus, ice creep or differential thermal expansion between the ice and gauge. The sensor also has a low temperature sensitivity (5 kPa/deg C).
    Type of Medium: Series available for loan
    Pages: 38 Seiten , Illustrationen
    Series Statement: CRREL Report 83-23
    URL: https://apps.dtic.mil/docs/citations/ADA133906
    URL: https://hdl.handle.net/11681/9296
    Language: English
    Note: CONTENTS Abstract Preface Introduction Previous work Stress measurements Design considerations Stress sensors Biaxial ice stress sensor Biaxial stress sensor theory Gauge deformation Stresses associated with cylindrical sensors Determination of ice stresses Gauge calibration Evaluation of the biaxial ice stress sensor Temperature sensitivity Biaxial loading test equipment Biaxial loading test results Differential thermal expansion Long-term drift Discussion of test results Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 62
    Series available for loan
    Series available for loan
    Baseline acidity of ancient precipitation from the South Pole (1984)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-84/15
    In: CRREL Report, 84-15
    Description / Table of Contents: Measurements of meltwater pH from annual layers of South Pole firn and ice samples ranging in age from 40 to 2000 years B.P. show that precipitation at this remote site has a higher natural acidity than that expected from atmospheric equilibrium with CO2. The average pH of deaerated (CO2-free) samples was 5.64 + or - 0.08, while air-equilibrated samples averaged 5.37 + or - 0.008, a pH that is about a factor of two more acidic than the expected background pH of 5.65. The observed 'excess' acidity can be accounted for by natural SO4(2)- and NO(3)- levels in the samples probably originating from non-anthropogenic H2SO4 and HNO3. Because of the presence of these naturally occurring acids in South Pole precipitation, a pH of 5.4 is considered a more representative baseline reference pH for acid precipitation studies.
    Type of Medium: Series available for loan
    Pages: ii, 12 Seiten , Illustrationen
    Series Statement: CRREL Report 84-15
    URL: https://apps.dtic.mil/docs/citations/ADA145007
    URL: https://hdl.handle.net/11681/9510
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 63
    Series available for loan
    Series available for loan
    Thermodynamic model of creep at constant stresses and constant strain rates (1983)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-83/33
    In: CRREL Report, 83-33
    Description / Table of Contents: A thermodynamic model has been developed that for the first time describes the entire creep process, including primary, secondary, and tertiary creep, and failure for both constant stress (CSR) tests (σ= const.) and constant strain rate (CSR) tests (ϵ = const.), in the form of a unified constitutive equation and unified failure criteria. Deformation and failure areconsidered as a single thermoactivated process in which the dominant role belongs to the change of entropy. Failure occurs when the entropy change is zero. At that moment the strain rates in CS tests reach the minima and stress in CSR tests reaches the maximum (peak) values. Families of creep (ϵ vs τ) and stress-strain (σ vs ϵ) curves, obtained from uni-axial compression CS and CSR tests of frozen soil, respectively (both presented in dimensionless coordinates), are plotted as straight lines and are superposed, confirming the unity of the deformation and failure process and the validity of the model. A method is developed for determining the parameters of the model, so that creep deformation and the stress-strain relationship of ductile materials such as soils can be predicted based upon information obtained from either type of test.
    Type of Medium: Series available for loan
    Pages: v, 25 Seiten , Illustrationen
    Series Statement: CRREL Report 83-33
    URL: https://apps.dtic.mil/docs/citations/ADA139883
    URL: https://hdl.handle.net/11681/9285
    Language: English
    Note: CONTENTS Abstract Nomenclature Introduction Principal relationships Constitutive equation Failure criteria Secondary creep: Flow equations Creep at constant stress (σ = Const.) Creep model Creep strain (σ = Const.) Creep at constant strain rate (ϵ = Const.) Stress-strain relationship Stress/strain/strain rate at failure Test data Preliminary analysis Constant stress tests (σ = Const.) Constant strain rate tests (ϵ = Const.) The principle of superposition Thermodynamic equation of creep Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 64
    Series available for loan
    Series available for loan
    Electromagnetic properties of sea ice (1984)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-84/2
    In: CRREL Report, 84-2
    Description / Table of Contents: Investigations of the in situ complex dielectric constant of sea ice were made using time-domain spectroscopy. It was found that (1) for sea ice with a preferred horizontal crystal c-axis alignment, the anisotropy of polarizing properties of the ice increased with depth, (2) brine inclusion conductivity increased with decreasing temperature down to about -8 C, at which point the conductivity decreased with decreasing temperature, (3) the DC conductivity of sea ice increased with increasing brine volume, (4) the real part of the complex dielectric constant is strongly dependent upon brine volume but less dependent upon the brine inclusion orientation, (5) the imaginary part of the complex dielectric constant was strongly dependent upon brine inclusion orientation but much less dependent upon brine volume. Because the electromagnetic (EM) properties of sea ice are dependent upon the physical state of the ice, which is continually changing, it appears that only trends in the relationships between the EM properties of natural sea ice and its brine volume and brine inclusion microstructure can be established.
    Type of Medium: Series available for loan
    Pages: vi, 38 Seiten , Illustrationen , 1 Beilage
    Series Statement: CRREL Report 84-2
    URL: https://apps.dtic.mil/docs/citations/ADA140330
    URL: https://hdl.handle.net/11681/9287
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Dielectric properties of sea ice Time-domain spectroscopy measurement Laboratory measurements Field measurements Analysis of ladder data Conductivity of brine and sea ice Complex dielectric constant of brine and sea ice Discussion and conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 65
    Series available for loan
    Series available for loan
    Model tests on two models of WTGB 140-foot icebreaker (1984)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-84/3
    In: CRREL Report, 84-3
    Description / Table of Contents: The results of resistance tests in level ice and broken ice channels are presented for two models of the WTGB 140-fticebreaker at scales of 1:10 and 1:24, respectively. No scale effect on the resistance in level ice could be detected between the two models. From the test results an empirical predictor equation for the full scale ice resistance is derived. Predicted resistance is compared against, and found to be 25 to 40% larger than, available full-scale values estimated from thrust measurements during full-scale trials of the Great Lakes icebreaker Katmai Bay.
    Type of Medium: Series available for loan
    Pages: v, 25 Seiten , Illustrationen
    Series Statement: CRREL Report 84-3
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a139882.pdf
    URL: https://hdl.handle.net/11681/9288
    Language: English
    Note: COTENTS Abstract Preface Nomenclature Introduction Model characteristics and test conditions Ice-hull coefficient of friction Measurements of ice properties Experimental procedures Data acquisition system Test program and procedures for 1:10 model Test program and procedures for 1:24 model Analysis of test results Comparison of test results between 1:10 and 1:24 models Analysis of tests in broken or brash-filled ice channels Analysis of tests in level ice Full-scale prediction of level ice resistance Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 66
    Series available for loan
    Series available for loan
    The effectiveness and influences of the navigation ice booms on the St. Marys River (1984)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-84/4
    In: CRREL Report, 84-4
    Description / Table of Contents: Ice problems developed in the Sault Ste. Marie, Michigan, portion of the St. Marys River because of winter navigation. Passing ships and natural influences moved ice from Soo Harbor into Little Rapids Cut in sufficient quantities to jam, cause high water in the harbor, and prevent further ship passage. After physical model and engineering studies, two ice booms with a total span of 1375 ft (419 m) with a 250-ft (76-m) navigation opening between were installed at the head of Little Rapids Cut in 1975. A modest field study program on the booms was conducted for the ensuring four winters to determine ice and boom interaction and the effects of ship passages on the system. Forces on some anchors were recorded and supplemental data were taken by local personnel. Several reports have been written about the booms' early operations. This paper presents four-year summary of the main effects of the booms on ice and ship interaction and vice versa. Throughout the four winter seasons, the small quantities of ice lost over and between the booms were manageable. Ships usually passed through the boom without influencing the boom force levels, but at time they brought about large changes. One boom needed strengthening, and artificial islands were added for upstream ice stability. Coast Guard icebreakers were also a necessary part of winter navigation in this area.
    Type of Medium: Series available for loan
    Pages: iv, 18 Seiten , Illustrationen
    Series Statement: CRREL Report 84-4
    URL: https://apps.dtic.mil/docs/citations/ADA139908
    URL: https://hdl.handle.net/11681/9281
    Language: English
    Note: CONTENTS Abstract Preface Introduction St. Marys River Ice problems Remedial measures Field studies Highlights, trends, and major findings Modifications to boom Maximum forces Ship traffic Characteristics Effect of boom forces Effect on ice Conclusion Literature cited Appendix A: Ice boom forces
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 67
    Series available for loan
    Series available for loan
    Morphology and ecology of diatoms in the sea ice from the Weddell Sea (1984)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-84/5
    In: CRREL Report, 84-5
    Description / Table of Contents: Diatom species composition and relative abundances were determined for ice cores obtained from Weddell Sea pack ice during the October-November 1981 Weddell Polynya Expedition (WEPOLEX). Ice thickness and salinity indicate that the ice was less than one year old. The predominant ice type (70%) was frazil, which has the capacity to mechanically incorporate biological material through nucleation and scavenging. Diatoms were found throughout the length of the cores. Species showed down-core fluctuations in abundance that appeared to be correlated with changes in ice type. Pennate forms were more abundant than centrics, the average ratio being 16:1. Diatom frustules with intact organic material were more abundant (5 billion cells/liter). Differences in species abundances are attributed initially to incorporation of algal cells from a temporally changing water column and subsequently to diatom reproduction within the ice. Scanning electron micrographs illustrating the morphologic characteristics of the predominant species are included.
    Type of Medium: Series available for loan
    Pages: iv, 46 Seiten , Illustrationen
    Series Statement: CRREL Report 84-5
    URL: https://apps.dtic.mil/docs/citations/ADA141994
    URL: https://hdl.handle.net/11681/9282
    Language: English
    Note: Contents Abstract Preface Introduction Materials and methods Results Discussion Conclusions Literature cited Appendix A: Taxonomic terms Appendix B: Differences in species composition and abundance in duplicate samples examined under optical and inverted light microscopes Appendix C: Morphologic descriptions and SEM micrographs
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 68
    Series available for loan
    Series available for loan
    Resilient modulus of freeze-thaw affected granular soils for pavement design and evaluation; Part 4: Field validation tests at Albany County Airport (1986)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-86/13
    In: CRREL Report, 86-13
    Description / Table of Contents: Stress-deformation data for six granular soils ranging from sandy silt to dense-graded crushedstone were obtained from in-situ tests and laboratory tests. Surface deflections were measured in the in-situ tests, with repeated-load plate-bearing and falling-weight deflectometer equipment, when the six granular soils were frozen, thawed, and at various stages of recovery from thaw weakening. The measured deflections were used to judge the validity of procedures developed for laboratory triaxial tests to determine nonlinear resilient moduli of specimens in the frozen, thawed, and recovering states. The validity of the nonlinear resilient moduli, expressed as functions of externally applied stress and moisture tension, was confirmed by using the expressions tocalculate surface deflections that were found to compare well with deflections measured in the in-situ tests. The tests on specimens at various stages of recovery are especially significant because they show a strong dependence of the resilient modulus on moisture tension, leading to the conclusion that predictions or in-situ measurements of moisture tension can be used to evaluate expected seasonal variation in the resilient modulus of granular soils.
    Type of Medium: Series available for loan
    Pages: iv, 148 Seiten , Illustrationen
    Series Statement: CRREL Report 86-13
    URL: http://hdl.handle.net/11681/9463
    Language: English
    Note: CONTENTS Abstract Preface Introduction Test sections Installing instruments and sampling Laboratory tests Asphalt concrete Base, subbase and subgrade soils Data analysis for base, subbase and subgrade soils Field tests Analysis of plate loading tests Analytical approach Results Discussion Conclusions Literature cited Appendix A: Field data Appendix B: Ground temperatures, moisture tension, water table and freezing iso-therms prevailing during plate loading tests Appendix C: Measured surface deflections compared with deflections calculated by NELAPAV Appendix D: Resilient moduli and supporting data calculated by NELAPA V at radius 0.0, taxiways A and B.
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 69
    Series available for loan
    Series available for loan
    Prototype drill for core sampling fine-grained perennially frozen ground (1985)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-85/1
    In: CRREL Report, 85-1
    Description / Table of Contents: An expensive drill has been modified to provide researchers with the ability to auger an open hole or to acquire continuous, undisturbed 76-mm-diam core samples of a variety of perennially frozen materials that are suitable for chemical and petrographic analysis. It was developed by field testing in support of research from 1980 to 1983. Operation of the drill is based mainly on using a minimum of power to cut through frozen ground with tungsten carbide cutters on a CRREL coring auger. The ice content, temperature and grain size of the frozen sediments are important variables determining the sampling depth. Perennially frozen sediments with temperatures in the range of -0.5 C to -8.5 C have been continuously cored with this drill. Drilling and sampling are most efficiently conducted when ambient air temperatures are below freezing and the active layer is frozen. The self-contained lightweight drill is readily transportable off-road by helicopter or tracked vehicle, or by towing over roads. It is locally self-mobile by use of a winch. Total cost of the drill and modifications is estimated at approximately $10,000.
    Type of Medium: Series available for loan
    Pages: v, 34 Seiten , Illustrationen
    Series Statement: CRREL Report 85-1
    URL: https://apps.dtic.mil/docs/citations/ADA152388
    URL: https://hdl.handle.net/11681/9352
    Language: English
    Note: CONTENTS Abstract Preface Introduction Background on development Drill development and configuration Equipment Modifications Operations Assembly and disassembly Field transport and movement Typical operating procedures Effect of material properties, weather and water Depth and hole completion time Summary Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 70
    Series available for loan
    Series available for loan
    Airfields on Antarctic glacier ice (1989)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-89/21
    In: CRREL Report, 89-21
    Description / Table of Contents: The physical characteristics of blue ice ablation areas in Antarctica are described and some representative ablation rates are given. The possibilities for using blue-ice areas as airfields are outlined and exploratory surveys are mentioned. Site details are given for icefields at Mount Howe, Mill Glacier, Patriot Hills, Rosser Ridge, Mount Lechner, S1 near Casey station, and on the Ross Ice Shelf near McMurdo station. The surface roughness of blue ice is discussed, microrelief surveys are presented for Mount Howe and Patriot Hills, and spectral analyses are used to develop relations between bump height and wavelength. U.S. military specifications for the roughness limits of various types of runways are summarized and graphical comparisons are made with the roughness analyses for Mount Howe and Patriot Hills. Special machines for smoothing ice runways are discussed and design specifications are developed. Some notes on ground facilities and ground transport are included. Appendices give discussions of weather patterns in the Transantarctic Mountains and methodology for making spectral analyses of surface roughness. It is concluded that glacier-ice airfields for conventional transport aircraft can be developed at low cost in Antarctica. Recommendations for further work are offered.
    Type of Medium: Series available for loan
    Pages: v, 105 Seiten , Illustrationen
    Series Statement: CRREL Report 89-21
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a217638.pdf
    URL: https://hdl.handle.net/11681/9085
    Language: English
    Note: CONTENTS Abstract Preface Introduction Blue-ice areas Blue-ice areas as airfield sites The formation of blue-ice areas Ablation rates at blue-ice areas Exploratory surveys at blue-ice areas Mount Howe Mill Glacier / Plunket Point Patriot Hills Rosser Ridge Mount Lechner The S-1 site near Casey station The McMurdo "Pegasus Site" Surface roughness of blue ice Analysis and characterization of surface roughness Surface preparation to reduce ice roughness Ground facilities Ground transport Conclusions and recommendations Literature cited and selected references Appendix A: Survey data for Patriot Hills, Mount Howe and Mill Glacier Appendix B: Analysis of surface roughness at blue-ice sites Appendix C: Meteorological conditions to be expected in summer in the Trans-antarctic Mountains
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 71
    Series available for loan
    Series available for loan
    Field tests of the kinetic friction coefficient of sea ice (1985)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-85/17
    In: CRREL Report, 85-17
    Description / Table of Contents: This report presents the results of tests of the ice friction coefficient carried out during the May 1984 expedition of the F.S. Polarstern off the coast of Labrador. The test surfaces were Inerta-160-coated steel plates and bare steel plates, hand roughened and sandblasted. The main findings of the studies were: 1) columnar and granularpea ice showed no significant differences in friction coefficient; 2) for columnar ice was independent of ice crystal orientation with respect to test surface; 3) was Independent of normal pressure applied on ice sample; 4) initially decreased with increasing relative velocity between the Ice sample and the test surface and reached a steady value at higher speeds; 5) Uk increased with increasing surface roughness; 6) a wetting surface exhibited a higher friction coefficient than a non-wetting surface of the same or even higher roughness average.
    Type of Medium: Series available for loan
    Pages: iv, 26 Seiten , Illustrationen
    Series Statement: CRREL Report 85-17
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a163170.pdf
    URL: https://hdl.handle.net/11681/9413
    Language: English
    Note: CONTENTS Abstract Preface Introduction Test procedure Test apparatus Test surfaces Ice samples Test program Results and discussion Effect of wear of ice sample Effect of normal pressure Effect of velocity, crystal orientation and surface conditions Results summary Comparison with laboratory study Recommendations on test apparatus Literature cited Appendix A : Test results
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 72
    Series available for loan
    Series available for loan
    Sorption of military explosive contaminants on bentonite drilling muds (1985)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-85/18
    In: CRREL Report, 85-18
    Description / Table of Contents: Concern over the environmental fate of explosives has brought about the development of sensitive analytical methods for measuring them in groundwater. In turn this concern has been extended to validating the sampling procedures for groundwater. This report addresses the potential effects of residual drilling muds on the analysis for explosive contaminants (TNT, DNT, RDX, and HMX) in monitoring wells. The approach was to determine sorption isotherms for each contaminant. Sorption appeared to be independent of solids concentration. Linear isotherms were obtained for RDX and HMX over a range of analytic concentrations; therefore, a single constant can be used to estimate the amount sorbed when the solution concentration is known. Isotherms for TNT and DNT were not linear, however. Scatchard analysis suggested that the isotherms for these analytes could be resolved into two predominant components: a linear component above a certain sorbed quantity and a Langmuir-type component below this quantity. The experimental data were fitted by regression analysis using the appropriate model. The equations developed can be used to predict the sorbed fraction (analytical bias) for any combination of solids and analyte concentration. The amounts of bentonite found in some existing wells do not appear to be sufficient to cause significant bias in analyses for these explosive contaminants.
    Type of Medium: Series available for loan
    Pages: iv, 40 Seiten , Illustrationen
    Series Statement: CRREL Report 85-18
    URL: https://apps.dtic.mil/docs/citations/ADA163231
    URL: https://hdl.handle.net/11681/9305
    Language: English
    Note: CONTENTS Abstract Preface Introduction Materials and methods Bentonite and water samples Sorbate solutions Sorption isotherms HPLC analysis Analyte standards Water solubilities Octanol-water partition coefficients Sorption isotherms Freundlich Langmuir BET Scatchard Gibbs Linear Polynomial Results and discussion TNT DNT RDX and HMX Effect of drilling muds on analysis SEM and EDXA analysis of bentonite wells Other studies Summary Literature cited Appendix A : Results for TNT Appendix B: Results for DNT Appendix C: Results for RDX Appendix D : Results for HMX Appendix E: Characteristics of Quik-Gel, Aqua-Gel and well water
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 73
    Series available for loan
    Series available for loan
    Brittleness of reinforced concrete structure under Arctic conditions (1986)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-86/2
    In: CRREL Report, 86-2
    Description / Table of Contents: The behavior of reinforced and unreinforced concrete beams was studied under impact loading at low temperatures, and the results were compared to the behavior of reinforcing steel (rebar) in Charpy-V impact tests. Transition temperatures as low as -30°C were obtained for the rebars in the Charpy-V tests whereas no brittle failures occured in the rebars in the reinforced concrete beams at the temperature as low as -63°C, even in beams whe're the rebars were Intentionally notched. The impact strength of unreinforced concrete increases considerably at lower temperatures, thus reducing cracking of reinforcedconcrete structures and significantly increasing the safety of lightly reinforced structures.
    Type of Medium: Series available for loan
    Pages: iii, 25 Seiten , Illustrationen
    Series Statement: CRREL Report 86-2
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a170792.pdf
    URL: https://hdl.handle.net/11681/9437
    Language: English
    Note: Abstract Preface Introduction Tests Test specimens Test methods Results Impact strength of beanms Ductility of beams Effect of notched bars Elastic deflection of beams Impact tests on rebars Conclusions and summary Literature cited Appendix A: Beam crack patterns Appendix B: Photomicrographs of failure surfaces of some steels
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 74
    Series available for loan
    Series available for loan
    Experimental determination of heat transfer coefficients in water flowing over a horizontal ice sheet (1986)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-86/3
    In: CRREL Report, 86-3
    Description / Table of Contents: Experiments to study the melting of a horizontal ice sheet with a flow of water above it were conducted in a 35 m long refrigerated flume with a cross section of 1.2x1.2 m. Water depth, temperature, and velocity were varied as well as the temperature and initial surface profile of the ice sheet. The heat transfer regimes were found to consist of forced turbulent flow at high Reynolds numbers with a transition to free convection heat transfer. There was no convincing evidence of a forced laminar regime. The data were correlated for each of the regimes, with the Reynolds number, Re, or the Grashof number combined with the Reynolds number as Gr/Re to the 2.5 power used to characterize the different kinds of heat transfer. For water flowing over a horizontal ice sheet, the melting heat flux, for low flow velocities, was not found to drop below the value for the free convection case-488.5 W/sq m-as long as the water temperature exceeds 3.4 C. This is significant since the free convection melt values far exceed those for laminar forced convection. At the low flow velocities, the melting flux was not dependent upon the fluid temperature until the water temperature dropped below 3.4 C, when q sub c = 135.7 (Delta T). In general, the heat transfer was found to significantly exceed that of non-melting systems for the same regimes. This was attributed to increased free stream turbulence, thermal instability due to the density maximum of water near 4 C, and the turbulent eddies associated with the generation of a wavy ice surface during the melting.
    Type of Medium: Series available for loan
    Pages: vii, 85 Seiten , Illustrationen
    Series Statement: CRREL Report 86-3
    URL: https://apps.dtic.mil/docs/citations/ADA170427
    URL: https://erdc-library.erdc.dren.mil/jspui/bitstream/11681/9438/1/CR-86-3.pdf
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Non-melting heat transfer relations for horizontal surfaces Heat transfer for melting horizontal ice sheets Instrument setup, data acquisition and test procedures General Instrumentation Data acquisition Computer software Test procedures Data output from computer Equations used for data analysis Control volume and melting surface Control of variables Error analysis Experimental results and discussion Wave formation Temperature and velocity profiles in open channel flow Correlation of data Summary Literature cited Appendix A: Conversion equations for data acquisition equipment Appendix B: Computer code for data acquisition and analysis Appendix C: Typical test output Appendix D: Thermal properties of water and ice Appendix E: Error analysis Appendix F: Summary of test conditions Appendix G: Experimental data and calculated quantities, with inlet length
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 75
    Series available for loan
    Series available for loan
    Short-pulse radar investigations of freshwater ice sheets and brash ice (1986)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-86/6
    In: CRREL Report, 86-6
    Description / Table of Contents: Short-pulse radar profiles and waveform traces were recorded over natural, freshwater ice sheets and an artificially made, 1.6-m-diameter column of brash ice. The purpose was to study the feasibility of this type of radar to detect ice thickness, determine ice properties and distinguish ice forms. The radar utilized two antennas: one with a spectrum centered near 900 MHz and a second more powerful one near 700 MHz. Distinct top and bottom reflections from several ice sheets were produced by both antennas, but the value of dielectric permittivity calculated from the time of delay of the reflections varied between sheets as one ice sheet was ready to candle and contained free water. The brash ice distorted signals and allowed no discernible bottom return. The lower frequency antenna also gave returns from the lake bottom (separated from the ice bottom by about 1 m of water), which could allow ice thickness to be determined indirectly. The report concludes that these antennas can be used to determine sheet ice thickness and to supply information to help in the detection of brash ice. The water content of an ice sheet may also be estimated if independent studies show a correlation between dielectric permittivity and free water content.
    Type of Medium: Series available for loan
    Pages: iv, 15 Seiten , Illustrationen
    Series Statement: CRREL Report 86-6
    URL: https://apps.dtic.mil/docs/citations/ADA172578
    URL: https://hdl.handle.net/11681/9429
    Language: English
    Note: CONTENTS Abstract Preface Introduction Materials and methods Sites and site preparation Results and discussion Lake Morey Post Pond Conclusions and recommendations Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 76
    Series available for loan
    Series available for loan
    Nitrogen control in wastewater treatment systems for military facilities in cold regions (1986)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-86/7
    In: CRREL Report, 86-7
    Description / Table of Contents: Nitrogen control in the form of ammonia removal or conversion is required, or will be required, for a significant number of military wastewater treatment systems. This reportpresents a summary of engineering criteria for those processes in most common use at military facilities in the cold regions. These processes include: trickling filters, treatmentponds, rotating biological contactors (RBC) and activated sludge. A design example is presented for each case. All four processes can achieve significant levels of ammonia removalor conversion. If ammonia discharge limits are 0.5 mg/L or less it may be necessary to use the activated sludge process. Trickling filters or RBC units are recommended for higher(〉 1 mgIL) discharge limits. Pond systems are suitable for seasonal ammonia removal incold climates.
    Type of Medium: Series available for loan
    Pages: iv, 29 Seiten , Illustrationen
    Series Statement: CRREL Report 86-7
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a173853.pdf
    URL: http://hdl.handle.net/11681/9431
    Language: English
    Note: CONTENTS Abstract Preface Introduction Background and theory Trickling filters Introduction Design procedure Design example Winter operations Pond systems Introduction Design procedure Design example Winter operations Rotating biological contactors Introduction Design procedure Design example Winter operations Activated sludge systems Introduction Design procedure Design example Winter operations Comparison of alternatives Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 77
    Series available for loan
    Series available for loan
    Effect of grain size on the internal fracturing of polycrystalline ice (1986)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-86/5
    In: CRREL Report, 86-5
    Description / Table of Contents: This work presents the results of a study to examine the effects of grain size of internal microfractures in polycrystalline ice. Laboratory-prepared specimens were tested under uniaxial, constant-load creep conditions at -5 C. Grain size ranged from 1.5 to 6.0 mm. This range of grain size, under an initial creep stress of 2.0 MPa, led to a significant change in the character of deformation. The finest-grained material displayed no internal cracking and typically experienced strains of 10 to the minus 2nd power at the minimum creep rate epsilon. The coarse-grained material experienced severe cracking and a drop in the strain at epsilon min to approximately 4x10 to the minus 3rd power. Extensive post-test optical analysis allowed estimation of the size distribution and number of microcracks in the tested material. These data led to the development of a relationship between the average crack size and the average grain size. Additionally, the crack size distribution, when normalized to the grain diameter, was very similar for all specimens tested. The results indicate that the average crack size is approximately one-half the average grain diameter over the stated grain size range. A dislocation pileup model is found to adequately predict the onset of internal cracking. The work employed acoustic emission techniques to monitor the fracturing rate occurred. Other topics covered in this report include creep behavior, crack healing, the effect of stress level on fracture size and the orientation of cracked grains. Theoretical aspects of the grain size effect on material behavior are also given.
    Type of Medium: Series available for loan
    Pages: v, 79 Seiten , Illustrationen
    Series Statement: CRREL Report 86-5
    URL: https://apps.dtic.mil/docs/citations/ADA171571
    URL: https://hdl.handle.net/11681/9321
    Language: English
    Note: CONTENTS Abstract Preface Background Present research in perspective Explanations of the grain-size dependency Grain size effects on the ductile to brittle transition Nucleation mechanisms and modeling Characteristic size of nucleated crack Cracking in ice Detection of internal fracturing by acoustic emission techniques Test methods Specimen preparation Creep testing apparatus Crack length and crack density measurements Crack healing measurements Thin section photographs Grain size determination Acquisition of acoustic emission data Presentation of results Specimen characteristics Microcrack measurements Creep behavior Crack healing Slip plane length distribution Acoustic emission observations Grain orientation Analysis and discussion Thick section observations The grain size vs crack size relationship Crack nucleation condition Crack density and specimen strain Creep behavior Normalized crack length Location of cracks Acoustic emission activity Summary and conclusions Suggestions for future work Literature cited Appendix A: Crack length histograms Appendix B: Crystal orientations
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 78
    Series available for loan
    Series available for loan
    Applications of the finite-element method to the problem of heat transfer in a freezing shaft wall (1986)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-86/8
    In: CRREL Report, 86-8
    Description / Table of Contents: In this work, numerical computations of heat transfer for freezing a shaft wall have been conducted. Both fixed mesh and deforming mesh finite-element methods are used. In the fixed mesh method, latent heat effects are accounted for through a δ function in the apparent heat capacity. In the deforming mesh method, an automatic mesh-generation technique with transfinite mappings is used, and in this method two different approaches are taken to evaluate the movement of the interface. The freeze-pipes are considered as point sources with irregular distribution. The advancement of the inner and outer boundaries of the frozen wall is found to be in agreement with the previously computed results
    Type of Medium: Series available for loan
    Pages: iii, 31 Seiten , Illustrationen
    Series Statement: CRREL Report 86-8
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a172552.pdf
    URL: http://hdl.handle.net/11681/9433
    Language: English
    Note: CONTENTS Abstract Preface Introduction Basic finite-element formulas Description of problem Finite-element equation-fixed mesh Finite-element equation-deforming mesh Transfinite mapping technique Computations and conclusions Literature cited Appendix A : Point heat sources Appendix B: Evaluation of the integral including latent heat (fixed mesh) Appendix C: Specification of [K] -deforming mesh Appendix D: Specifying δΤ/δn and the direction of mj for method I Appendix E: Procedures of method 2 Appendix F: Explanation of programs
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 79
    Series available for loan
    Series available for loan
    A theory for the scalar roughness and the scalar transfer coefficients over snow and sea ice (1986)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-86/9
    In: CRREL Report, 86-9
    Description / Table of Contents: The bulk aerodynamic transfer coefficients for sensible (C sub H) and latent (C sub E) heat over snow and sea ice surfaces are necessary for accurately modeling the surface energy budget but are very difficult to measure. This report therefore presents a theory that predicts C sub H and C sub E as functions of the wind speed and a surface roughness parameter. The crux of the model is establishing the interfacial sublayer profiles of the scalars, temperature and water vapor, over aerodynamically smooth and rough surfaces. These interfacial sublayer profiles are delivered from surface-renewal model in which turbulent eddies continually sweep down to the surface, transfer scalar contaminants across the interface by molecular diffusion, and then burst away. Matching the interfacial sublayer profiles with the usual semilogarithmic inertial sublayer profiles yields the roughness lengths for temperature and water vapor. With these and a model for the drag coefficient over snow and sea ice based on actual measurements, the transfer coefficients are predicted. C sub E is always a few percent larger than C and H. Both decrease monotonically with increasing wind speed for speeds above 1 m/s, both increase at all winds speeds as the surface gets rougher. Both, nevertheless, are almost between 0.0010 and 0.0015.
    Type of Medium: Series available for loan
    Pages: vi, 26 Seiten , Illustrationen
    Series Statement: CRREL Report 86-9
    URL: https://apps.dtic.mil/docs/citations/ADA174089
    URL: http://hdl.handle.net/11681/9435
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Aerodynamically rough surface Aerodynamically smooth surface Scalar transfer coefficients Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 80
    Series available for loan
    Series available for loan
    Natural rotor icing on Mount Washington, New Hampshire (1986)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-86/10
    In: CRREL Report, 86-10
    Description / Table of Contents: Icing of a four-bladed rotor was studied under natural conditions at the top of Mt. Washington, N.H. The rotor had two cylindrical blades and two airfoil blades. The results were compared with studies conducted in icing wind tunnels. Considerable differences in icing regimes were observed. For instance, with comparable liquid water content and wind speed the wet-to-dry growth regime transition temperature was up to 10 C higher under natural conditions than in the wind tunnel studies. Results of other studies made under natural conditions were close to those of the present study, indicating that wind tunnel conditions are significantly different from natural conditions. Close examination of the conditions indicated that supersaturation of water vapor existing in most of the wind tunnel studies is the most probable cause of the differences.
    Type of Medium: Series available for loan
    Pages: v, 68 Seiten , Illustrationen
    Series Statement: CRREL Report 86-10
    URL: http://hdl.handle.net/11681/9328
    Language: English
    Note: CONTENTS Abstract Preface Introduction Site weather Site selection Equipment Rotor Data logger Rotoscope Laser profile camera Thin section preparation Run procedure Sample collection and shutdown Dry runs and static runs Results and discussion Wet-to-dry growth regime transition Stagnation line icing rate Icing rate on cylindrical and airfoil blades Liquid water content vs stagnation line icing rate Droplet capture efficiency index Temperature rise Morphological and crystallographic aspects Summary and conclusion Literature cited Appendix A: Chronology of events .. Appendix B: Narrative description of icing runs Appendix C: Weather summary sheets for test days Appendix D: Signal conditioner circuit diagram and sample printout
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 81
    Series available for loan
    Series available for loan
    Morphology, hydraulics and sediment transport of an ice-covered river : field techniques and initial data (1986)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-86/11
    In: CRREL Report, 86-11
    Description / Table of Contents: This initial study of the ice-covered Tanana River, near Fairbanks, Alaska, attempted to 1) establish field methods for systematic and repetitive quantitative analyses of an ice-covered river's regime, 2) evaluate the instruments and equipment for sampling, and 3) obtain the initial data of a long-term study of ice cover effects on the morphology, hydraulics and sediment transport of a braided river. A methodology was established, and detailed measurements and samplings, including profiling by geophysical techniques, were conducted along cross sections of the river. A small, portable rotary drill rig equipped with a 356-mm (14-in.) ice auger was used to cut large diameter holes in the ice cover for through-the-ice measurements. Portable heat sources and a heated shelter were required to continuously thaw and dry equipment for the repetitive measurements. Measurements included ice cover thickness, water level, water depth, temperature, flow velocity, suspended load and bed load, frazil ice distribution and bed material composition. Remotely gathered data included apparent resistivity and subsurface radar profiling. The various techniques, sampling gear and problems encountered during use in the subfreezing cold are described in detail in this report.
    Type of Medium: Series available for loan
    Pages: v, 49 Seiten , Illustrationen
    Series Statement: CRREL Report 86-11
    URL: http://hdl.handle.net/11681/9318
    Language: English
    Note: CONTENTS Abstract Preface Introduction Study objectives and field locale Study site Equipment Vehicles Drilling equipment Sampling equipment Geophysical equipment Shelter and icing control Surveying equipment Miscellaneous equipment Field techniques and methodology Logistics Drilling procedures Data collection Geophysical analyses Experiences summary Morphology, transport and hydraulic data Mid-winter physical characteristics Hydraulic characteristics Sediment transport Late winter physical characteristics Seasonal morphology Geophysical data interpretation Spatial morphology Frazil ice characteristics Discussion and conclusions Recommendations Equipment Research Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 82
    Series available for loan
    Series available for loan
    Mechanical properties of multi-year sea ice : phase 1: ice structure analysis (1987)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-87/3
    In: CRREL Report, 87-3
    Description / Table of Contents: This report describes the structural analysis of multi-year sea ice samples that were tested in the first phase of a program designed to obtain a comprehensive understanding of the mechanical properties of multi-year sea ice from the Alaskan Beaufort Sea. Each test specimen is classified into one of three major ice texture categories: granular, columnar, or a mixture of columnar and granular ice. The crystallographic orientation, percent columnar ice, and grain size are then evaluated for the granular and/or columnar ice in the sample. Test results are interpreted with respect to these parameters. The overall composition of multi-year ridges is also considered, based on the extensive field sampling that was done in the program
    Type of Medium: Series available for loan
    Pages: iii, 40 Seiten , Illustrationen
    Series Statement: CRREL Report 87-3
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a181205.pdf
    URL: https://hdl.handle.net/11681/9044
    Language: English
    Note: CONTENTS Abstract Preface Introduction Sample analysis Continuous multi-year ridge core Tested multi-year ridge ice samples Tested multi-year floe ice samples Ice description Uniaxial constant-strain-rate compression tests Uniaxial constant-load compression tests Uniaxial constant-strain-rate tension tests Triaxial constant-strain-rate compression test Conclusions Literature cited Appendix A: Multi-year ridge sample data Appendix B: Multi-year floe sample data
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 83
    Series available for loan
    Series available for loan
    Ice forces on rigid, vertical, cylindrical structures (1984)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-84/33
    In: CRREL Report, 84-33
    Description / Table of Contents: A small-scale experimental study was conducted to characterize the magnitude and nature of ice forces during continuous crushing of ice against a rigid, vertical, cylindrical structure. The diameter of the structure was varied from 50 to 500 mm, the relative velocity from 10 to 210 mm/s, and the ice thickness from 50 to 80 mm. The ice tended to fail repetitively, with the frequency of failure termed the characteristic frequency. The characteristic frequency varied linearly with velocity and to a small extent with structure diameter. The size of the damage zone was 10 to 50% of the ice thickness, with an average value of 30%. The maximum and mean normalized ice forces were strongly dependent on the aspect ratio (structure diameter/ice thickness). The forces increased significantly with decreasing aspect ratio, but were constant for large aspect ratios. The maximum normalized forces appeared to be independent of strain rate. The effect of velocity on the normalized ice forces depended on structure diameter. The mean effective pressure or specific energy of ice crushing depended on both aspect ratio and ice-structure relative velocity. The energy required to crush the ice for the one failure cycle was obtained from the ice force records for each test, and was compared to the energy calculated from an idealized sawtooth shape for the force record, the maximum force, velocity and characteristic frequency data. Originator - supplied keywords included: Cold regions, Cold regions construction, Cylindrical test structures, Ice, Ice crushing, Ice forces, and Test facilities.
    Type of Medium: Series available for loan
    Pages: vi, 47 Seiten , Illustrationen
    Series Statement: CRREL Report 84-33
    URL: https://hdl.handle.net/11681/9351
    Language: English
    Note: Contents Abstract Preface Nomenclature Introduction Test objectives Experimental setup and procedures Facilities Test fixture Data acquisiton system Ice sheets Measurement of ice properties Daily test summary Experimental results and discussion Observations Ice force records Frequency of ice force variations Discussion Maximum crushing forces Mean effective pressure or specific energy of ice in crushing Failure energy of ice Ratio of maximum force to mean force Summary and conclusions Literature cited Appendix A: Data for continuous crushing tests
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 84
    Series available for loan
    Series available for loan
    Effect of nonuniform size on internal stresses in a rapid, simple shear flow of granular materials : Part 2. Multiple grain sizes (1985)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-85/3
    In: CRREL Report, 85-3
    Description / Table of Contents: In the past all theoretical analyses for rapidly sheared granular flows assumed that the granular solids are either disks or spheres and are uniform in size. However, natural materials that create these granular flows are in general irregular in shape and have various spectra of sizes. The stress and rate of energy dissipation levels in granular flows are significantly influenced by the size distribution. In part 1 of this report series (AD-A154 045), the formulation of the constitutive equations considering a two-size granular mixture is presented, where the ratio of the two sizes is nearly one. In part 2, the constitutive equations for a two-size mixture are extended to include a general size ratio. In addition, a complete spectrum of size distribution is incorporated, which allows the quantification of the size distribution effect in the most general way. In analyzing the stresses, intergranular collision is assumed to be the major dynamic activity at the microscopic level. Because of the present limited knowledge of testing shape effects, the analysis is confined to the flow of either disks or spheres. The result of this work provides necessary information for a more realistic analysis of natural and industrial granular flow. Keywords: Granular flow, and Particle size distribution.
    Type of Medium: Series available for loan
    Pages: vi, 29 Seiten , Illustrationen
    Series Statement: CRREL Report 85-3
    URL: https://apps.dtic.mil/docs/citations/ADA154046
    URL: https://hdl.handle.net/11681/9350
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Constitutive equations for a two-size mixture Limiting case of the two-size mixture Complete spectrum analysis for spheres and disks Conclusion Literature cited Appendix A: Derivation of collision frequency between neighboring spheres that follow the mean shear flow without fluctuations
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 85
    Series available for loan
    Series available for loan
    Numerical modeling of sea ice dynamics and ice thickness characteristics : a final report (1985)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-85/5
    In: CRREL Report, 85-5
    Description / Table of Contents: A dynamic-thermodynamic sea ice model is extended to include a full thermodynamic code and a complete multilevel ice thickness distribution. The variable thickness formulation includes a more realistic parameterization of ice ridging than used in previous models. Seasonal simulations have been performed using this model and the results have been analyzed with particular emphasis on examination of the ridge buildup results off the Canadian Archipelago and off the North Slope. This report presents a complete description of this model and discusses progress made on examining and testing the variable thickness extensions.
    Type of Medium: Series available for loan
    Pages: vi, 60 Seiten , Illustrationen
    Series Statement: CRREL Report 85-5
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a154600.pdf
    URL: https://hdl.handle.net/11681/9354
    Language: English
    Note: CONTENTS Abstract Preface Summary Introduction Description of the model Ice thickness equations Heat budget and oceanic boundary layer Analytic examination of the ridge redistribution process Theoretical framework Some specific redistributors Comparison to ridge morphological data Ice strength for different redistributors Numerical simulation results Basin-wide ice thickness and velocity characteristics Ice edge evolution and sensitivity Ice thickness characteristics off the Canadian Archipelago Comparison of observed and simulated ice drift Mass balance characteristics Concluding remarks Literature cited Appendix A: Mechanical redistributor Appendix B: Heat budget code Appendix C: Thickness finite difference code
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 86
    Series available for loan
    Series available for loan
    Shoreline conditions and bank recession along the U.S. shorelines of the St. Marys, St. Clair, Detroit and St. Lawrence Rivers (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/11
    In: CRREL Report, 82-11
    Description / Table of Contents: The purpose of this investigation was to provide data to be used in evaluating the effects of winter navigation on pro­cesses that cause bank erosion. The specific objectives were to document bank conditions and erosion sites along the rivers, to monitor and compare the amounts of winter and summer bank recession and change, and to estimate the amount of recession that occurred prior to winter navigation. Shoreline conditions and bank recession were documented during field surveys each spring and fall. Bank changes were evaluated by comparison to observations from a previous survey. Aerial photointerpretation was done to estimate the amount of bank recession that occurred prior to winter navigation. Three hundred forty-five miles of river shoreline were surveyed. Banks were eroding along 21.5 miles (6.2%). The common types of bank failures were soil falls (sloughing) and block sliding and slumping. The erosion along approxi­mately 15 miles (70%) of the 21.5 miles was occurring along reaches not bordering winter navigation channels.
    Type of Medium: Series available for loan
    Pages: v, 75 Seiten , Illustrationen
    Series Statement: CRREL Report 82-11
    URL: https://hdl.handle.net/11681/9345
    Language: English
    Note: CONTENTS Abstract Preface Introduction Previous investigations Approach Shoreline conditions Bank changes Bank recession before winter navigation St. Marys River Bank changes Bank recession before winter navigation St. Clair River Bank changes Bank recession before winter navigation Detroit River Bank changes Bank recession before winter navigation St. Lawrence River Bank changes Historical bank recession Summary and conclusions Literature cited Appendix A: St. Marys River Appendix B: St. Clair River Appendix C: Detroit River Appendix D: St. Lawrence River
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 87
    Series available for loan
    Series available for loan
    Evaluation of methods for calculating soil thermal conductivity (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/8
    In: CRREL Report, 82-8
    Description / Table of Contents: A detailed analysis of methods for calculating the thermal conductivity of soils is presented, and trends in the predic­tions of these methods are compared. The influence of changes in the moisture content on the calculated thermal con­ductivity of a soil (at constant dry density) is shown, as is the sensitivity of this calculated value to changes in dry den­sity or in the soil solids’ thermal conductivity. The methods are evaluated to determine the extent of agreement of their predictions with measured values obtained on soils of known composition and properties. The deviations of the predicted values are determined for soils that are unfrozen or frozen, coarse or fine, unsaturated, saturated or dry. The applicability of each of the methods under various conditions is determined and recommendations are made as to the best method for each condition.
    Type of Medium: Series available for loan
    Pages: vi, 90 Seiten , Illustrationen
    Series Statement: CRREL Report 82-8
    URL: https://hdl.handle.net/11681/9452
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Analysis of methods for calculating thermal conductivity Introduction Influence of moisture content on thermal conductivity Influence of dry density on thermal conductivity Influence of soil solids’ thermal conductivity Comparison of the various methods Evaluation of methods for calculating thermal conductivity Soils data used for evaluation Computer program Applicability of the methods Discussion and conclusions Applicability to unfrozen soils Applicability to frozen soils Applicability to saturated soils Effect of soil mineral composition Applicability to dry soils Summary of applicability of methods Literature cited Appendix A: Properties of some test soils Appendix B: Comparison of thermal conductivity values computed by the various methods and of their deviations from the values measured
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 88
    Series available for loan
    Series available for loan
    Environmental analysis of the Upper Susitna River Basin using Landsat imagery (1980)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-80/4
    In: CRREL Report, 80-4
    Description / Table of Contents: The primary objectives of this study were to 1) prepare a map from Landsat imagery of the Upper Susitna River Basin drainage network, lakes, glaciers and snowfields, 2) identify possible faults and lineaments within the upper basin and within a 100-km radius of the proposed Devil Canyon and Watana dam sites as observed on Landsat imagery, and 3) prepare a Landsat-derived map showing the distribution of surficial geologic materials and poorly drained areas. The EROS Digital Image Enhancement System (EDIES) provided computer- enhanced images of Landsat-1 scene 5470-19560. The EDIES false color composite of this scene was used as the base for mapping drainage network, lakes, glaciers and snowfields, six surficial geologic materials units and poorly drained areas. We used some single-band and other color composites of Landsat images during interpretation. All the above maps were prepared by photointerpretation of Landsat images without using computer analysis, aerial photographs, field data, or published reports. These other data sources were used only after the mapping was completed to compare and verify the information interpreted and delineations mapped from the Landsat images. Four Landsat-1 MSS band 7 winter scenes were used in the photomosaic prepared for the lineament mapping. We mapped only those lineaments related to reported regional tectonics, although there were many more lineaments evident on the Landsat photomosaic.
    Type of Medium: Series available for loan
    Pages: iii, 41 Seiten , Illustrationen
    Series Statement: CRREL Report 80-4
    URL: https://apps.dtic.mil/dtic/tr/fulltext/u2/a084900.pdf
    URL: https://hdl.handle.net/11681/9039
    Language: English
    Note: CONTENTS Abstract Preface Summary Objectives Conclusions Introduction Background Previous cooperative investigations Project rationale and coordination Approach Landsat imagery Interpretation techniques Part I. Use of Landsat imagery in mapping the drainage network, lakes, glaciers and snowfields (Lawrence W. Gatto) Objective Methods Results Conclusions Part II. Use of Landsat imagery in mapping and evaluating geologiclineaments and possible faults (Carolyn J. Merry) Objective Geologic structure Methods Results Conclusions Part Ill. Use of Landsat imagery in mapping surficial materials Section A. Landsat mapping (Harlan L. McKim) Objective Methods Results Section B. Field evaluation (Daniel E. Lawson) Objectives Methods Results Discussion Section C. Conclusions (Daniel E. Lawson and Harlan L. McKim) Literature cited Glossary
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 89
    Series available for loan
    Series available for loan
    Wastewater applications in forest ecosystems (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/19
    In: CRREL Report, 82-19
    Description / Table of Contents: Under proper design and management, a forest ecosystem in the central United States should renovate municipal wastewater as long or longer than conventional agricultural systems, especially when design limitations are hydraulic loading rate, heavy metals, P and N. Forest systems require smaller buffer zones than agricultural systems and lower sprinkler pressures. Immature forests are better wastewater renovators than mature forests.
    Type of Medium: Series available for loan
    Pages: iv, 22 Seiten , Illustrationen
    Series Statement: CRREL Report 82-19
    URL: https://hdl.handle.net/11681/9364
    Language: English
    Note: CONTENTS Abstract Preface Introduction Forest systems design Pretreatment Distribution systems Public health considerations Buffer zone requirements Toxic effects Public access Hydraulic loading Nutrient uptake and loading Introduction Nitrogen Phosphorus Trace metals Design considerations Hydraulic loading rates Nitrogen loading rates Forest management options Reforestation Existing forest ecosystems Short term rotation plantations Potential long term effects on forest ecosystems Longevity of forest systems Consequences of overloading Soil chemical, physical and hydrologic properties Productivity Summary Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 90
    Series available for loan
    Series available for loan
    Seismic site characterization techniques applied to the NATO RSG-11 test site in Münster Nord, Federal Republic of Germany (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/17
    In: CRREL Report, 82-17
    Description / Table of Contents: Seismic P and SH wave refraction experiments at the NATO RSG-11 test site in Munster Nord, Federal Republic of Germany, reveal the presence of a nearly horizontal, three-layer velocity structure. The upper layer, composed of un­consolidated glacial till, is 1 m thick and has P (compressional) and SH (shear-horizontal) wave velocities of 240 and 165 m s-1. The second layer, made up of similar, more compacted material, is 9.5 m thick, with a P wave velocity of 470 m s-1 and an SH wave velocity of 275 m s-1. The third layer, interpreted as the groundwater table, is located at a depth of 10.5 m and has a P wave velocity of 1590 m s-1. The SH wave velocity of this layer is controlled by the matrix material and is the same as that of the second layer. A single, unreversed observation indicated a fourth layer at a depth of about 20 m, but the existence of this layer remains unconfirmed. The observed fundamental mode Love wave dispersion is in agreement with the theoretical dispersion predicted by the refraction velocities. Computed partial derivatives of phase velocity with respect to shear wave velocity show, for the frequencies observed, that the dispersion confirms the thicknesses and velocities of the two upper layers and is not affected by the deeper structure.
    Type of Medium: Series available for loan
    Pages: iv, 33 Seiten , Illustrationen
    Series Statement: CRREL Report 82-17
    URL: https://hdl.handle.net/11681/9355
    Language: English
    Note: CONTENTS Abstract Preface Introduction Refraction experiments Procedure Equipment Results P waves Low velocity zone SH waves Surface wave experiments Summary and discussion Literature cited Appendix A: P wave refraction data Appendix B: SH wave refraction data. Appendix C: Surface wave dispersion calculations
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 91
    Series available for loan
    Series available for loan
    Application of a numerical sea ice model to the East Greenland area (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/16
    In: CRREL Report, 82-16
    Description / Table of Contents: Abstract: A dynamic-thermodynamic sea ice model which employs a viscous-plastic constitutive law has been applied to the East Greenland area. The model is run on a 40-km spatial scale at 1/4-day time steps for a 60-day period with forcing data beginning on 1 October 1979. Results tend to verify that the model predicts reasonable thicknesses and velocities within the ice margin. Thermodynamic ice growth produces excessive ice extent, however, probably due to inadequate parameterization of oceanic heat flux. Ice velocities near the free ice edge are also not well simulated, and preliminary investigations attribute this to an improper wind field in this area. A simulation which neglects ice strength, effectively damping ice interaction with itself and allowing no resistance to deformation, produces excessive ice drift toward the coast and results in unrealistic nearshore thicknesses. A dynamics-only simulation produced reasonable results, including a more realistic ice extent, but the need for proper thermodynamics is also apparent. Other simulations verify that ice import from the Arctic Basin, and ice transport due to winds and currents, were also important components in the model studies.
    Type of Medium: Series available for loan
    Pages: v, 40 Seiten , Illustrationen , 29 cm
    Series Statement: CRREL Report 82-16
    URL: https://hdl.handle.net/11681/9356
    Language: English
    Note: CONTENTS Abstract Preface Introduction Model description and application Results and discussion Wind and current fields Standard simulation Thermodynamic simulation Zero ice strength Zero ice import Zero currents Modified currents Zero winds Dynamics simulation Summary and concluding remarks Literature cite
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 92
    Series available for loan
    Series available for loan
    Optimizing deicing chemical application rates (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/18
    In: CRREL Report, 82-18
    Description / Table of Contents: Snow and ice control on highways has come to rely heavily on the use of sodium chloride to maintain a trafficable surface for unimpeded movement. Empirical approaches have led to a wide range of application rates, some clearly excessive, but justified on the ground of safety and expediency. The combination of environmental degradation from the huge quantities of salt entering the environment, along with the increased cost of salt itself and the cost of its application have spurred the search for more precise knowledge of the proper amount of salt to apply to a pavement, considering a range of environmental, traffic and chemical parameters. Since controlled tests in the field are extremely difficult to make, a circular test track of three test pavements, dense-graded asphaltic concrete (DGA), open-graded asphaltic concrete (DGA) and portland cement concrete (PCC), was constructed in a coldroom. Natural snow and ice were applied to the pavements and an instrumented slipping wheel was driven over the surfaces to generate frictional forces. These forces were measured and then used to evaluate the response to salt application with time for three test temperatures. OGA had the lowest friction values at a temperature near the freezing point, but higher initial values or more rapidly increasing values than DGA and PCC following salt application at the two lower temperatures. Optimum application rate of salt on PCC and DGA lies between 100 and 300 lb/lane mile (LM), and a higher rate resulted in slight or no improvement in friction. DGA showed anomalous results: lower friction for 300 Ib/LM and higher friction for both 100 and 500 Ib/LM.
    Type of Medium: Series available for loan
    Pages: vi, 55 Seiten , Illustrationen
    Series Statement: CRREL Report 82-18
    URL: https://hdl.handle.net/11681/9363
    Language: English
    Note: CONTENTS Abstract Preface Introduction Objectives Background Approach Influencing factors Field factors Laboratory Laboratory trafficking tests Force measurement and coefficient of friction Test tire slip Surface friction gauge Test procedure British portable tester Experimental results Conclusions Recommendations Literature cited Appendix A. Test pavements Appendix B. Pennsylvania State University field study Appendix C. Rochester Institute of Technology field study
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 93
    Series available for loan
    Series available for loan
    Relationship between the ice and unfrozen water phases in frozen soil as determined by pulsed nuclear magnetic resonance and physical desorption data (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/15
    In: CRREL Report, 82-15
    Description / Table of Contents: An experiment is described that demonstrates the balance between the ice and the unfrozen water in a frozen soil as water is removed. Nuclear magnetic resonance (NMR) is used to monitor the unfrozen water content as the soil is dehydrated by a molecular sieve material. Our results show that the unfrozen water content of a Morin clay soil remains constant until the total water content has been reduced to the point where no ice remains in the system. Once the ice is depleted, the unfrozen water content determined by NMR corresponds to the total water content of the soil determined by the weight of water removed by the molecular sieve material. Thus the validity of utilizing NMR in determining unfrozen water contents vs temperature is established.
    Type of Medium: Series available for loan
    Pages: 8 Seiten , Illustrationen
    Series Statement: CRREL Report 82-15
    URL: https://hdl.handle.net/11681/9357
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 94
    Series available for loan
    Series available for loan
    Comparative analysis of the USSR construction codes and the US Army technical manual for design of foundations on permafrost (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/14
    In: CRREL Report, 82-14
    Description / Table of Contents: A comparative study was made of design criteria and analytical methods for footings and pile foundations on perma­frost employed in U.S.S.R. Design Code SNiP II-18-76 (1977) and U.S. Army Cold Regions Research and Engineering Laboratory Special Report 80-34 developed in the early 1970's by the U.S. Army Corps of Engineers and published in 1980. The absence of adequate constitutive equations for frozen soils and of rigorous solutions of the boundary prob­lems has made it necessary to incorporate (explicitly or implicitly) various safety factors in the foundation analyses. From the review it is concluded that the principal difference between these practices is in the assessment and application of appropriate values of safety factors, which leads to a substantial discrepancy in the dimensions and cost of footings and pile foundations in permafrost.
    Type of Medium: Series available for loan
    Pages: iv, 20 Seiten , Illustrationen
    Series Statement: CRREL Report 82-14
    URL: https://hdl.handle.net/11681/9358
    Language: English
    Note: CONTENTS Abstract Preface Introduction U.S.S.R. system of standards U.S.S.R. Design Code SNiP 11-18-76 (1977) subsoils and foundations on permafrost General regulations Classification of soils Basic regulations for foundation design Analysis of subsoils and foundations Design of foundations for special soil conditions, and appendices SR 80-34 (1980) design and construction of foundations in areas of deep seasonal frost and permafrost General information Foundation design Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 95
    Series available for loan
    Series available for loan
    Numerical solutions for a rigid-ice model of secondary frost heave (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/13
    In: CRREL Report, 82-13
    Description / Table of Contents: Frost heave is analyzed for the common case in which some ice penetrates the soil. In this situation, heave is due to the accumulation of soil-free ice just within the frozen zone, behind a frozen fringe of finite thickness. Heat and mass transport within and across that fringe are crucial processes in the dynamics of heave. This analysis concentrates on activity within the fringe, also connecting that activity to heat and mass flows in the more frozen and unfrozen zones. Each component in a set of governing differential equations is developed from rational physics and thermodynamics, using previous experimental work. It is assumed that the soil ice grows through interconnected interstices; hence it constitutes and can move as a rigid body. When the assumption is translated into mathematical terms, it completes the governing equations. The model resulting from these considerations is a one-dimensional finite element computer program that solves the equations for arbitrary initial and boundary conditions. The model is used to simulate the heave history of a hypothetical soil column frozen unidirectionally and subjected to a surcharge. The results are gratifying in that they predict qualitatively the characteristics of numerous laboratory observations. Some questions about the completeness of the theory remain, and strict verification of the model awaits further experimentation and better parameter identification.
    Type of Medium: Series available for loan
    Pages: iii, 11 Seiten , Illustrationen
    Series Statement: CRREL Report 82-13
    URL: https://hdl.handle.net/11681/9344
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 96
    Series available for loan
    Series available for loan
    Sensible and latent heat fluxes and humidity profiles following a step change in surface moisture (1982)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-82/12
    In: CRREL Report, 82-12
    Description / Table of Contents: From a high-quality set of velocity, temperature, and humidity profiles collected upwind and downwind of a step change in surface roughness, temperature, and moisture, we have calculated upwind and downwind values of the heat fluxes and friction velocity. The surface change is from smooth to rough; upwind, the sensible heat flux is upward and the latent heat flux is zero; downwind, the surface is well-watered so that the latent heat flux is upward while the sensible heat flux is downward. The downwind latent heat flux in this fetch-limited flow obeys NL=0.08 Rx 0.76 where NL is the latent heat Nusselt number and Rx is the fetch Reynolds number, a parameter for characterizing fetch-limited flows. Because this relation is virtually the same as one found to describe the sensible heat and condensate fluxes over arctic leads, we conclude that the Nusselt numbers nondimensionalizing scalar fluxes are the same for a given fetch Reynolds number when boundary conditions are similar.
    Type of Medium: Series available for loan
    Pages: vii, 18 Seiten , Illustrationen
    Series Statement: CRREL Report 82-12
    URL: https://hdl.handle.net/11681/9346
    Language: English
    Note: CONTENTS Abstract Preface List of symbols Introduction Upwind: flux gradient method Downwind: integral method ResulIts Energy budget Latent heat flux Surface stress Downwind humidity profiles Discussion Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 97
    Series available for loan
    Series available for loan
    Maximum thickness and subsequent decay of lake, river and fast sea ice in Canada and Alaska (1980)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-80/6
    In: CRREL Report, 80-6
    Description / Table of Contents: Weekly measurements of the thickness of lake, river and fast sea ice made over a period of 10 to 15 years at 66 locations in Canada and Alaska are analyzed, and the portion of the data relating to maximum ice thickness and decay (i.e. the decrease in ice thickness) is examined. Ice thickness curves revealed individual patterns of ice decay, and comparisons between locations disclosed major contrasts in the amount of ice accretion and the times of maximum ice and ice clearance. Although many factors affect the ice decay process, this study investigates in detail the effect of thawing temperatures. Concurrent measurements of the air temperature at each location made it possible to analyze the relationship between accumulated thawing degree-days (ATDD) and ice cover decay. Other factors affecting ice ablation and breakup, such as snow-ice formation, snow cover depth, solar radiation and wind are also discussed.
    Type of Medium: Series available for loan
    Pages: v, 160 Seiten , Illustrationen
    Series Statement: CRREL Report 80-6
    URL: https://cdm16021.contentdm.oclc.org/digital/collection/p266001coll1/id/6395
    URL: https://hdl.handle.net/11681/9526
    Language: English
    Note: CONTENTS Abstract Preface Introduction Data sources and literature review Canada Alaska Data tabulation Station selection Description of tabulated data Station location and ice measurement site descriptions Review of previous studies on maximum ice in North America Maximum ice thickness maps Date of maximum ice Plotting of the ice decay curves General procedures Categories of water bodies Ice decay at sea ice locations Envelope curves Average curves Snow-ice formation Ice decay at lake ice locations Average curves Regional variations and similarities Ice decay at river ice locations Variations in ice thickness Rapid ice clearance Comparison between Alaskan and Canadian river ice decay curves Incremental extraction of ice decay data for analysis purposes Selection of ice decay intervals Preliminary evaluation of the methodology Further considerations of the methodology Relationships between ice decay and thawing air temperatures Average daily vs maximum daily air temperature 10-day increments vs accumulated values Total years vs year-to-year analysis Evaluation of use of 0°C as a base Final format of the relationship between ice decay and ATDD Evaluation of the final form Possible causes for variations in slope values Decreasing sea ice thickness and thawing air temperatures Factors affecting sea ice decay Relationship between ATDD and sea ice decay Influence of solar radiation and wind on sea ice decay Literature cited Selected bibliography Appendix A. Ice thickness measurements and other related (or associated) observations for stations in Canada and Alaska Appendix B. Maps of least and greatest ice thickness observed at the time of maximum growth, and average date of occurrence Appendix C. Annual ice decay curves for stations in Canada and Alaska
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 98
    Series available for loan
    Series available for loan
    Asphalt concrete for cold regions : a comparative laboratory study and analysis of mixtures containing soft and hard grades of asphalt cement (1980)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-80/5
    In: CRREL Report, 80-5
    Description / Table of Contents: This research comprised laboratory testing to determine the properties of asphalt-aggregate mixtures containing three grades of asphalt cements, and analyses to project the performance of pavements containing each of the asphalts, in resisting thermally induced distress and traffic-associated distress. From the results it is concluded that only the softest asphalt cement tested (AC 2.5) would perform satisfactorily in a cold climatic zone. The moderately soft (AC 5) and moderately hard (AC 20) asphalt cements showed little susceptibility to thermal cracking in a moderate and a warm climatic zone, respectively. The AC 2.5 and AC 5 asphalts are not recommended for use in warm climates, however, owing to increased susceptibility to rutting under traffic.
    Type of Medium: Series available for loan
    Pages: vi, 55 Seiten , Illustrationen
    Series Statement: CRREL Report 80-5
    URL: https://apps.dtic.mil/docs/citations/ADA082198
    URL: https://hdl.handle.net/11681/9528
    Language: English
    Note: CONTENTS Abstract Preface Introduction Research setting Objectives Materials, mixture designs, and tests Materials Mixture design tests Brazil test Resilient modulus test Data analysis Marshall tests Asphalt grade Compactive effort Aggregate type Data analysis Brazil tests Indirect tensile strength Tensile strain Vertical deformation Summary of Brazil test results Data analysis-resilIient modulus. Comparison of mixture susceptibility to temperature cracking General asphalt concrete stiffness Thermal cracking. Influence of asphalt cement properties Summary Comparison of mixture susceptibility to traftic-load-associated distress Stress/strain analysis Fatigue damage analysis Rutting analysis Strength correlations Marshall stability and indirect tensile strength Indirect tensile strength and resilient modulus Summary Summary and conclusions Recapitulation of investigations Summary of results Conclusions Literature cited Appendix A: Asphalt adggregate mixture properties by Marshall method Appendix B: Equations for calculating specimen properties from Brazil tests Appendix C: Calculated displacements, strains and stresses
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 99
    Series available for loan
    Series available for loan
    Revegetation at two construction sites in New Hampshire and Alaska (1980)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-80/3
    In: (DE-B103)105551, CRREL Report
    Description / Table of Contents: Revegetation techniques were investigated for gravel soils in cold regions. Two gravel soil test sites were established in Hanover, New Hampshire, and Fairbanks, Alaska. During three growing seasons, we studied the applicability and cost effectiveness of various nutrient sources and mulch materials. The nutrient sources included sewage sludge (at 40, 60 and 80 tons/acre) and commercial fertilizer (at 200, 400 and 600 lb/acre). The mulching materials were wood fiber mulch with various types of tackifiers, peat moss, and sewage sludge. The effects of refertilization during the second growing season were also studied. At both sites the use of sewage sludge produced superior results in many respects to the use of fertilizer at the application rates studied. Grasses receiving sludge showed better establishment rates and greater plant cover and growth, and were able to withstand the hot drying conditions encountered during the summer months. Slightly quicker grass establishment was noted at the higher rates of application of each nutrient source in Fairbanks, while grass establishment at all sludge rates was good in Hanover. All fertilizer treatments performed poorly in Hanover. No evidence of winter injury to the grasses was noted in any of the treatments. Supplemental applications of nitrogen fertilizer in Hanover during spring of the second growing season proved highly beneficial. The fertilizer helped maintain grass growth even during dry summer conditions. The mulches were applied at the rate of 2,000 lb/acre. They were found to be important in providing a more nearly optimum environment for seedling establishment. Wood fiber mulch and the commercial Wood Fiber Mulch 2000, generally, were the best performers.
    Type of Medium: Series available for loan
    Pages: vi, 21 Seiten , Illustrationen
    Series Statement: CRREL Report 80-3
    URL: https://apps.dtic.mil/docs/citations/ADA082305
    URL: https://hdl.handle.net/11681/9040
    Language: English
    Note: CONTENTS Abstract Preface Introduction Literature review Experimental design Climate Results and discussion Nutrient sources Mulches Soil fertility Cost analysis Summary and conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
  • 100
    Series available for loan
    Series available for loan
    Single and double reaction beam load cells for measuring ice forces (1980)
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Details Availability
    Call number: ZSP-201-80/25
    In: CRREL Report, 80-25
    Description / Table of Contents: Two new types of load cells for attachment to bridge piers and direct measurement of ice forces were developed and tested with one type being installed on a pier of the Yukon River Bridge northwest of Fairbanks, Alaska. Both types of load cells used beams supported by base plates and carried nose plates that were loaded by the ice. The loads were imposed at the beams at locations differing from the support reactions so that the loads developed moments in the beams. By instrumenting them with strain gauges, the loads could be measured. Details of the design of the load cells, the means of calculating the loads and experience obtained with load cells are discussed.
    Type of Medium: Series available for loan
    Pages: iii, 17 Seiten , Illustrationen
    Series Statement: CRREL Report 80-25
    URL: https://cdm16021.contentdm.oclc.org/digital/collection/p266001coll1/id/6038
    Language: English
    Note: CONTENTS Preface Conversion factors Introduction Estimates and field measurements of ice forces on structures General Indirect estimates Direct measurements Small-scale and laboratory studies Instrumentation plan for measuring ice loads on the Yukon River Bridge Load cell development The single reaction beam system Performance of a single reaction beam load cell The double reation beam load cell Reaction beam design Stress in the beam Deflection Axial tensile stress in the reaction beam Measurement techniques Conclusions Literature cited Appendix A. Finding load magnitude and location with a single reaction beam device Appendix B. Finding load magnitude and location on a double reaction beam device
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    BOOK
    Link to Library Catalog
    get availability status
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...