ALBERT

Note: CONTENTS Abstract Preface Introduction Ice fog from cooling ponds Evaporation Relative humidity and cold air Ice fog suppression Air movement Plastic films Rafts Injection wells Cooling towers Chemical films Reinforced film experiments Meteorological data collection Floating reinforcement grid Application of the hexadecanol film Hexadecanol, octadecanol mixes Ethylene glycol monobutyl ether Laboratory tests of suppression effectiveness Conclusions Literature cited Appendix A. Design for an automatic thin chemical film applicationsystem Appendix B. Meteorological data

Note: CONTENTS Abstract Preface Conversion factors Introduction Types of pipelines and cables Potential hazards to pipelines and cables Areas of concern Waterdepth Sea ice Icebergs and ice islands Submarine permafrost Ice gouging Seabed erosion by water jets Protection methods Protection of unburied pipes and cables Protection by burial Backhoe digging Wireline equipment Plowing and ripping from the surface Plowing and ripping by self-propelled seabed vehicles Bucket ladder dredges Suction dredging Conventional cutterhead dredges Low pressure water jetting Bottom-traveling cutterhead dredges Explosive methods Novel methods Disc saws, wheel ditchers and milling drums Ladder trenchers and chain saws Repetitive impulse devices High pressure water jets Flame jets and plasma torches Electrical discharge and electromagnetic radiation Chemical methods Conclusions Literature cited

Note: CONTENTS Abstract Preface Nomenclature Introduction Background Experimental design Similitude considerations The model Model operation Results Velocity Fence height Porosity Model correlation Summary and conclusions Recommeqdations for future work Literature cited Appendix A

Note: CONTENTS Abstrac Preface Introduction Analysis of stress Geometry of the Mohr circle Stress characteristic directions Analysis of strain rate Constitutive equations Strain-rate characteristic directions Constitutive geometry Strain-rate tensor The dyadic expression Plastic work rate Coordinate transformation Example The stress solution Velocity equations in the a-characteristic curvilinear coordinates The constant speed solution Velocity equations in the constant density region Solution in the first constant-density subregion Solution in the second constant-density subregion Solution in the passive region Conclusion Literature cited

Note: CONTENTS Abstract Preface Nomenclature Introduction Derivation of the power reflection coefficient-depth variation Possible sources of dielectric constant variation with depth in ice sheets Ice density variations Effect of macroscopic impurity layers Effect of microscopic impurtty layers Changes in inclusion geometry Effect of crystal orientation changes Physical properties of the Cape Folger core Density-depth profile Air bubble-geometry depth profile Crystal orientation-depth profile Radio-echo sounding data Results and conclusions Literature cited

Note: CONTENTS Page Abstract Preface Conversion factors: U.S. customary to metric (SI) units of measurement Background Objectives Profiling system Approach Profiling method Data reduction and interpretation Results Conclusions Recommendations Literature cited Appendix A. Comparison of ground and aerial data

Note: CONTENTS Abstract Preface List of symbols Introduction I. Initiation of ice jams by partial surface obstructions A. Introductory remarks B. Experimental apparatus and procedure C. Dimensional analysis D. Presentation of results and discussion ΙΙ. Thickness of ice jams due to accumulation and transport of ice floes A. Introductory remarks B. Experimental apparatus and procedures C. Presentation of results E. Conclusion III. Compressive strength of floating fragmented ice covers A. Introductory remarks B. Experimental setup and procedure C. Presentation of results and discussion D. Conclusions Literature cited Appendix A: Experimental results on ice jam initiation Appendix B: Effect of surface tension on submergence velocity of ice floes Appendix C: Experimental results for ice jam thickness study Appendix D: Experimental results on compressive strength of fragmented ice cover

Note: CONTENTS Abstract Preface Introduction Test procedure Test program Test samples Number of test for determining strength index Effect of temperature Effect of sample length Effect of load point size Tests on snow Discussion Recommendations Literature cited

Note: CONTENTS Abstract Preface Conversion factors: US, customary to metric (SI) units of measurement Introduction Infrared camera Core samples State House State House Annex State Library Legislative Office Building Public Health Complex Highway Garage Fish and Game Offlces Supreme Court John O. Morton Building Department of Health and Welfare Laboratory Economics of roof reinsulation Conclusions and recommendations Literature cited

Note: CONTENTS Abstract Preface Conversion factors: U.S. customary to metric units of measurements Introduction The freezing proeess Icing observations Geographical distribution of icing and contributing meteorological conditions Extreme icing conditions Extremes of icc accumulation Prediction of icing occurrences Prediction of icing intensity and rate Control methods Measurement of icing rate Conclusions and recommendations Literature cited Appendix A. Maps of icing occurrence and rate Appendix B. Data for computing ship icing rates Appendix C. Estimation of ice accumulation

Note: CONTENTS Abstract Preface Introduction Historical literature review Relationships between midwinter temperature and freezing season Mean freezing index 4 Average January air temperature U.S. comparative study Correlation of AJAT and duration of freezing season Relationships between average January air temperature and snow conditions U.S. relationships German relationships Mapping of average January air temperatures Analysis of observed AJ AT data Development of detailed maps Application and discussion Examples Influence of vegetation Literature cited Appendix A. interpretation of snow cover by satellite Appendix B. Contour, station elevation and Aj AT maps for East and West Germany

Note: CONTENTS Abstract Preface Nomenclature Introduction Experimental procedure Grain growth Stressed particle contacts Fluid pressure Packing geometry Temperature distribution and heat flow Fluid and impurity flows Results The liquid film Conclusions Literature cited

Note: CONTENTS Abstract Preface Conversion factors: U.S. customary to metric units of measurement Introduction Background Previous investigations Analytical procedures Results and discussion Shoreline changes: High-water line Shoreline changes: Cliff recession Volumetric changes Nodal zone location and direction of littoral transport Error evaluation Summary and conclusions Future research Selected bibliography Appendix A: Maps of shoreline with overlays for 1938, 1952, 1971 and 1974 Appendix B: Supplementary data for estimating shoreline change

Note: CONTENTS Abstract Preface Introduction Test sites and ice cover properties Beam testing Results Discussion Conclusions Literature cited

Note: CONTENTS Abstract Preface Conversion factors: U.S. customary to metric (SI) units of measurement Introduction Theory Solution by superposition Solution by Fourier integral Solution by Fourier series Application and results Literature cited Appendix A: Bearing capacity of river ice for military vehicles Appendix B: Vehicle specifications Appendix C: Fortran II computer program

Note: CONTENTS Abstract Preface Introduction The protected membrane roof Winter construction considerations Construction costs Conclusion

Note: CONTENTS Abstract Preface Summary Introduction Background Objective and procedure Theory of plane surface waves Waveguide design and characteristics Physical apparatus Frequency characteristics Spatial distribution of Ey above the guide Guide wave length Surface wave interaction with a slab discontinuity Experiments with a trough Discussion and conclusions Literature cited

Note: CONTENTS Abstract Preface Introduction The problem The solution Method of numerical integration Ramp/steady loading Curve fitting to time lapse deflections Asymptotic deflection Deflection profiles Acknowledgement Literature cited Appendix I. Analytical background Appendix II. Computer programs, ramp time profiles and steady time profiles

Note: CONTENTS Abstract Preface Nomenclature Introduction Segregation freezing Analysis Heat conduction in the nascent ice layer Water flow in the unfrozen soil Heat transfer in the unfrozen soil Energy balance at the segregation-freezing front Numerical computation Literature cited Appendix A. Essence of Portnov’s method Appendix B. Frost-heaving without air available

Note: Contents 1 Introduction 1.1 Purpose 1.2 Some terminology 1.3 Electrical analogues 1.4 State determined systems 1.5 Simulation languages 2 Exponential growth 2.1 Analytical and numerical integration 2.2 Simulation 2.3 Time constant and time interval of integration 2.4 Integration method and time interval 3 The growth of yeast 3.1 Description of the system 3.2 Relational diagrams 3.3 Simulation 3.4 Logistic growth 4 Interference of plants 4.1 Replacement series 4.2 Density of sowing 4.3 Simulation of plant interference 4.4 Further modelling aspects 4.4.1 The INDEX and MACRO feature 4.4.2 The INITIAL and DYNAMIC section 5 Growth and competition of Paramecium 5.1 Description of the system 5.2 A simulation program 5.3 Preliminary estimation of parameters 5.4 Final determination of parameters 5.5 Stochastic aspects 5.6 The programming of probability functions 6 Modelling of development, dispersion and diffusion 6.1 Introduction 6.2 Physiological age and development stage 6.3 Demographic models 6.3.1 Age-classes 6.3.2 Errors of approximation 6.3.3 The matrix method 6.4 Germination models 6.4.1 Boxcar train without dispersion 6.4.2 Boxcar train with constant relative dispersion 6.4.3 Boxcar train with controlled dispersion 6.4.4 Refinements 6.5 The flow of heat in soils 7 Growth and development of Helminthosporium maydis 7.1 Introduction 7.2 The weather 7.3 Appearance and growth of lesions 7.4 Sporophore or stalk formation 7.5 Sporulation of green stalks 7.6 Sporulation of dried stalks 7.7 Dispersal of spores 7.8 Germination of spores and penetration of germtubes 7.9 Timing, initialization and output organization 7.10 Results and sensitivity analyses 8 Population models for fruit-tree red spider miteand predatory mites 8.1 Fruit-tree red spider mite 8.2 Predatory mite, Amblyseius potentillae 8.3 Relations between predator and prey 8.4 Preference as a competitive process 8.5 Verification 9 Solutions of the exercises References Appendix A Appendix B Index

Note: CONTENTS Abstract Preface Conversion factors: U.S. customary to metric (SI) Units of measurement Introduction Test procedure Pavement types Deicing chemicals Description of tests Discussion Literature cited Appendix A: Test results Appendix B: Portland cement concrete materials data

Note: CONTENTS Abstract Preface Conversion factors Introduction Descriptions of road test sections Test equipment and procedures Field repetitive plate bearing tests Data analysis General Layered-elastic analysis of the pavement systems Statistical analysis Flexural analysis Summary and conclusions Literature cited Appendix A: Resilient surface deflections for the test points

Note: CONTENTS Abstract Preface Introduction Comparison of winters Ship effects Measured forces Sequential breaking of the structure Discussion Conclusions Recommendations Literature cited Appendix A. Force level fluctuations in west ice boom, 20 January 1977

Note: CONTENTS Abstract Preface Nomenclature Conversion factors: Metric (SI) to U.S. customary units of measurement Introduction Selection of experimental approach Previous investigations of effect of freeze-thaw on soil deform ability Selection of laboratory test method Selection of method of field validation tests Field repeated-load plate-bearing tests Test pavements, soils and materials Test procedures and results Resilient modulus of subgrade calculated from field tests Mathematical model Characterization of asphalt concrete Characterization of frozen silt Calculated resilient modulus of silt within the zone of freezing Laboratory repeated-load triaxial tests Specimens, equipment and testing procedures Apparatus Procedures Resilient properties calculated from laboratory tests Calculation methods Asphalt concrete - test results Asphalt concrete - statistical analysis and discussion Silt - test results Silt - statistical analysis Discussion and conclusions Literature cited Appendix A. Repeated-load plate-bearing test results Appendix B. Laboratory repeated-load triaxial test results Appendix C. Regression equation coefficients for resilient modulus and Poisson’s ratio from repeated-load triaxial test data on asphalt concrete and silt Appendix D. Detailed procedures for repeated-load triaxial testing

Note: CONTENTS Abstract Preface Introduction Previous work Methods and results Methods of analysis Salinity-chlorophyll a associations Discussion Comparison of ice and water column standing crops Estimated mass of ice associated chl. a Mechanism of ice algae formation in the Weddell Sea Differences between the biological environments of fast and drifting pack ice Conclusions Literature cited Appendix A. Species variations - ice and water column

Note: CONTENTS Abstract Preface Nomenclature Introduction 1. The problem 2. Abstract of the result Part I. Fundamental solutions 3. Fuchsian type solutions 4. Contour integral solution 5. Integration of the integral solution 6. Fundamental solutions for α = 1 7. Fundamental solutions for α = 0 8. Eigenvalues for α = 0 9. Fundamental solutions for α 〉 1 Part II. Asymptotic expansions 10. Asymptotic expansion for 0 〈 α ⩽1 11. Asymptotic expansion for 1 ≦ α ≦ 2 12. Asymptotic expansion for 2 ≦ α ≦ ∞ Part III. Eigenvalues 13. Range of eigenvalues 14. Eigenvalues for the free-edge condition 15. Eigenvalues for the clamped-edge and simple-edge conditions 16. Deflection Acknowledgement Literature cited Appendix A. Analytical continuation at the singular point Appendix B. Tensorial transformations Appendix C. Comparison of the semi-infinite plate buckling with the asymptotic buckling

Note: CONTENTS Abstract Preface Conversion factors: U.S.customary to metric units of measurement Introduction Freeze-thaw system Construction materials Controlled environment test section Outdoor sections Temperature monitoring instrumentation Repetitive plate bearing test apparatus Test results and analyses Conclusions Literature cited

Note: CONTENTS Abstract Preface Introduction Locale and techniques Observations Vertical variations in crystal orientation Regional variations in crystal orientation Summary of observations Causes Initial ice skim Earth’s magnetic field Currents Conclusions and consequences Literature cited

Note: CONTENTS Abstract Preface Nomenclature Summary Introduction Problem General review of the subject Experimental apparatus General considerations Water reservoir Test chamber assembly Pumping system Electrical control system Experimental procedure Experimental results Discussion and comparison of results Conclusions Literature cited

Note: CONTENTS Abstract Preface Introduction Sources and properties of tabular icebergs Sources Characteristics of ice shelves near the ice front Characteristics of tabular icebergs Towing Geophysical and engineering considerations Tug characteristics Handling and processing Cutting and boring with thermal devices Penetration with electrothermal devices Electrothermal cutting Making vertical cuts by pre-split blasting Primary fragmentation by blasting Primary fragmentation by mechanical sawing Comminuting ice with machines Slurry pipelines Conclusion Literature cited

Note: CONTENTS Abstract Preface Introduction Experimental procedure Snow collection Spectrophotometric methods Data analysis Potential sources of error Presentation of results Continuous-scan measurements Comparison of sequential bandpass and continuous-scan measurements Theoretical calculations Discussion of results Differences in amplitude of reflectance measurements Irregularities in the shape of spectral reflectance curves The true spectral reflectance of snow in the ultraviolet region Conclusions Literature cited Appendix A. Absolute reflectance values of pressed BaSO4 powder

Note: CONTENTS Abstract Preface Foreword Introduction Terminology Forces on individual cutters Torque force and tool force Forces on the rotor axis Tractive thrust and down thrust Alternative tool force formulations Vehicle traction Power/weight ratio Weight and balance Force, torque, speed and power Specific energy Efficiency and performance index Power density Power requirements for ejection of cuttings Hydrodynamic resistance in underwater cutting

Note: CONTENTS Abstract Preface Introduction Theory Limiting span of an arch Flow of pack ice through converging channels Stoppage of flow Applications St. Lawrence Amundsen Gulf Bering Strait Conclusion References

Note: CONTENTS Abstract Preface Foreword Introduction Terminology Principles of cutting Forces acting on a single cutter Theoretical Ideas on cutting Experimental data on cutting forces Effect of chipping depth on tool forces Effect of rake angle on tool forces Effect of relief angle on cutting forces Effect of side rake on tool forces Effect of base angle or face profile on tool forces Effect of rounding at the cutting edge Effect of tool width on cutting forces Tool compliance and force fluctuations Effect of tool speed on cutting forces Effect of rock properties on cutting forces Tool interaction and kerf spacing Effect of multiple pass cutting on tool forces Effect of tool wear on cutting forces Development of wear Energetics of cutting Energetics of parallel-motion tools Variation of specific energy with chipping depth for a single tool Effect of rake angle on specific energy Effect of relief angle on specific energy Effect of side rake on specific energy Effect of base angle or face profile on specific energy Effect of tip radius on specific energy Effect of tool width on specific energy Effect of tool speed on specific energy Variation of specific energy with rock properties Effect of kerf spacing on specific energy Effect of multiple pass cutting on specific energy Effect of tool wear on specific energy General summary Literature cited Appendix Α. Additional data for ice Appendix Β. Conversion factors: U.S. customary and metric units of measurement

Note: Erscheinungsjahr in Vorlageform:1995

Note: CONTENTS Abstract Preface Introduction Site description Background and objectives Project history Approach General Aircraft imagery and sensor data LANDSAT imagery Ground truth data Results and discussion Remote sensing techniques Conventional techniques Comparison of results Conclusions Advantages and disadvantages Applications Recommendations Literature cited

Note: CONTENTS Abstract Preface Introduction and statement of problem Review of relevant analyses and tests Determination of the largest ice force on an isolated structure Preliminary remarks The buckling analysis of a floating wedge Proposed method to determine Literature cited

Note: CONTENTS Page Abstract Preface Summary Nomenclature Introduction Water movement through snow Vertical percolation Lateral flow Flat roofs Sloping roofs Rainfall intensity-duration effects Miscellaneous effects Radial flow to drains Flow along gutters on snow-covered roofs Snow structure Basal layer Conclusion Literature citied Appendix A. Computer program calculating roof loads from rain-on-snow

Note: CONTENTS Abstract Preface Summary Introduction Ice thickness and quantity Chronology of the 1975 Chena River breakup Checkpoint 3 Checkpoint 4 Checkpoint 5 Checkpoint 6 Checkpoint A Checkpoint 7 Checkpoint C Checkpoint D Checkpoint 8 Checkpoint 10 Checkpoint 11 Checkpoint 12 Spring flooding and debris The 1976 Chena River breakup Breakup in other years Summary and conclusions Appendix A. Sequential photographs of 1975 breakup at checkpoints 3-12

Note: CONTENTS Abstract Preface Nomenclature Conversion factors: U.S. customary to metric units of measurement Introduction Description of experiment Apparatus Test procedure Experimental results Summary of experimental tests Influence of coolant water flow rates Approximation of the rate of melting Comparison of experimental and computed results Comparative analysis of the model sinks Approximation of the heat transfer coefficient Conclusions and recommendations Literature cited Appendix A. Experimental data, heat sink Model II Appendix B. Heat sink scaling and similarity relationships Appendix C. Derivation of the relationships for the heat transfer coefficient, Reynolds and Nusselt numbers Appendix D. Determination of freezing rates and refrigeration loads Appendix E. Approximation of stresses in the heat sink tank

Note: CONTENTS Abstract Preface Conversion factors: U.S.customary to metric (SI) units of measurement Introduction Location of test sites Fairbanks Anchorage Hanover, N.H. Test program Instrumentation Effectiveness Therma lefficiency Heat balance within the roof Comparisons with conventional systems Conclusions Effectiveness of the test roof Thermal efficiency Heat balance within the roof Applicability Recommendations Literature cited Appendix A. Temperature and heat flow measurements, Anchorage and Fairbanks, Alaska, and Hanover, New Hampshire Appendix B. Thermal efficiencies of the test roof, Anchorage and Fairbanks, Alaska, and Hanover, New Hampshire Appendix C. January 1973 and August 1972 comparisons of protected membrane and conventional built-up membrane systems at Hanover, New Hampshire

Note: CONTENTS Abstract Preface Introduction Sampling and analytical procedures Results Discussion Conclusions Literature cited

Note: CONTENTS Abstract Preface List of symbols Summary Introduction Recent ice research in Denmark General Structures with vertical faces Wedges with inclined faces Recording of the strength of natural ice Artificial ice — properties and manufacture General Composition of material Order of mixing ingredients Rupture theory Theoretical approach Initial contact Forces acting on wedge Maximum force and actual force Principal stress equations 8Dynamic equations Intermittent nature of force Theoretical curve Verifiction of theory by model tests Description Width of rupture channel Plotting of results Engineering application Comparison with Korahavin’s results Recommendations for future research References Appendix A

Note: Contents: 1. Introducing transnational climate change governance ; 2. Mapping the world of transnational climate change governance 3. Theoretical perspectives on transnational governance ; 4. Origins, agency and the forms of transnational climate change governance ; 5. Constructing transnational climate change governance issues and producing governance spaces ; 6. The uneven geography of transnational climate change governance ; 7. Understanding authority and legitimacy in transnational climate change governance ; 8. Making a difference? Tracing the effects and effectiveness of transnational climate change governance ; 9. Conclusions - looking beyond transnational climate governance

Note: Inhalt Vorwort 1. Beiträge zu den geologisch orientierten Arbeitsgruppen 4, 7, 9 1.1. OLSZAK, G.: Zur strukturellen Umformung der Erdkruste bei der Entwicklung regionaler tektonischer Elemente 1.2. PAECH, H.-J.: Kurzer Tätigkeitsbericht über geologische Arbeiten in der westlichen Antarktis (Shackleton Range) 1.3. JUBITZ, K.-B.: Die Entwicklung des Amadeus-Beckens in Zentralaustralien - Beckendynamik im Bereich alter Tafeln 1.4. TESCHKE, H.-J.: Sarmato-Turan-Lineament 1.5. SCHROEDER, E.: Probleme der Entwicklung und des Baues der Varisziden in Mitteleuropa und im Gebiet der UdSSR 1.6. SOHROEDER, E.: Beiträge zur vergleichenden Analyse tektonischer Strukturen im Variszikum des Südurals und Mitteleuropas 1.7. SCHWAB, G.; BENEK, R.; BRÜCKNER, W.; JUBITZ, K.-B.; LUDWIG, A.; MEIER, R.; NÖLDEKE, W.; STOLL, A.; TESCHKE, H.-J.: Beckendynamik der Norddeutsch-Polnischen Senke - Paläomobilität im Bereich einer jungen Tafel (Fortschrittsbericht) 1.8. JUBITZ, K.-B.; TESCHKE, H.-J.: Das IGCP-Projekt 86 "SW-Rand der Osteuropäischen Tafel" und seine Beziehungen zum Geodynamik-Projekt 1.9. KRAUSS, M.: Ein Beitrag zur paläotektonischen Abgrenzung, Gliederung und Entwicklung des westlichen Teils der Osteuropäischen Plattform während des Paläozoikum (Gebiet Dänemark - Baltikum) 1.10. LÜTZNER, H.: Sedimentation, Vulkanismus und Tektonik der variazischen Innenmolasse im Thüringer Wald - Studien zur Paläomobilität im Übergangsstockwerk zwischen Geosynklinal- und Tafeletappe im Gebiet der DDR 1.11. LÄCHELT, S.: Geologisch-tektonisch-magmatische Entwicklung und metallogenetische Prozesse 1.12. KRAMER, W.: Zu einigen basischen magmatischen Formationen im Gebiet der DDR und deren geotektonischer sowie metallegenetischer Bedeutung 1.13. RÖSLER, H.J.; WERNER, C.-D.: Variazische Initialmagmatite Mitteleuropas 1.14. BENEK, R.: Vulkanit-Formationen als Indikatoren der Krustenfelderung bzw. unterschiedlichen Mobilitätsverhaltens 1.15. BANKWITZ, P.: Überblick über Magmatismus und Metamorphose im Altpaläozoikum Mittel- und Westeuropas 1.16. LÄCHELT, S.: Beziehungen zwischen der Blocktektonik, dem Magmatismus und der endogenen Metallogenie im mitteleuropäischen Raum 1.17. PAECH, H.-J.: Zum Ablauf tektogener Deformationen im mitteleuropäischen Variszikum 1.18. BANKWITZ, P.; BANKWITZ, E.; FRISCHBUTTER, A.: Zur Tektonik des Präkambriums der Elbezone und ihres Rahmens 1.19. BENEK, R.; FRISCHBUTTER, A.; NEUMANN, W.: Methodische Arbeiten im Kristallin des Baikal-Riftes 1.20. NEUMANN, W.: Paläogeographie und Paläotektonik des Nossen-Wilsdruffer Schiefergebirges (Saxothuringikum im Bereich des Zentralsächsischen Lineamentes) 1.21. LUDWIG, A.O.: Paläogeographie und Paläotektonik des Saxen von Mitteleuropa 1.22. MEIER, R.: Halogenese und Beckendynamik 1.23. BANKWITZ, P.; BANKWITZ, E.: Geologische Interpretation rezenter Krustenbewegungen Osteuropas 1.24. LUDWIG, A.O.: Zum gegenwärtigen Stand der Quartärforschung im südlichen Ostseeraum - Paläogeographie, Neotektonik, Aussagen zur Paläotektonik 1.25. ELLENBBRG, J.; FALK, F.; GRUMBT, E.; LÜTZNER, H.: Methodik der Untersuchungen von Molassen 1.26. NEUMANN, W.: Geologisches Modell zur Interpretation des tiefenseismischen NW - SE-Profils zwischen Granulit- und Erzgebirge 2. Beiträge zu der geophysikalisch-geodätisch orientierten Arbeitsgruppe 5 2.1. BÖLSCHE, J.; KRESSER, K.-D.: Erste Ergebnisse reflexionsseismischer Tiefenerkundung auf einem Profil von 30 km Länge im Süden der DDR 2.2. GRÄSSL, S.; HURTIG, E.; GRÜNTHAL, G.: Untersuchungen zum Bau der Erdkruste mit Hilfe seismischer Dreikomponentenregistrierungen 2.3. SCHULZE, A.: Untersuchungen zur Auflösung von Interferenzstrukturen seismischer Wellen mit Hilfe von Polarisationsfiltern 2.4. GROSSER, H.: Einfluß der Geometrie seismischer Punktwellen auf den Spektralinhalt des Wellenfeldes 2.5. STILLER, H.; WAGNER, F.C.; VOLLSTÄDT, H.: Die Geschwindigkeiten elastischer Wellen im klüftigen Gestein und in Erdbebengebieten 2.6. GRÜNTHAL, G.; HURTIG, E.: Zur .makroseismischen Auswertung des Friaul-Erdbebens vom 6. Mai 1976 auf dem Territorium der DDR 2.7. NEUNHÖFER, H.: Observation of microearthquakes in the Vogtland region since 1962 2.8. MAAZ, R.: Zur Statistik von Erdbeben 2.9. ELSTNER, CL.; HARNISCH, G.; ALTMANN, W.: Präzisionsgravimetrische Messungen auf der W - E-Linie der DDR 1970-76 2.10. FISCHER, H.; NEUBERT, R.: Instrumentelle Entwicklungen auf dem Gebiet der Laser-Satellitenentfernungsmessung 2.11. MONTAG, H.; GENDT, G.: Zur Untersuchung geodynamischer Parameter mit Hilfe von Satellitenbeobachtungen 2.12. JOCHMANN, H.: Betrachtungen zur Variation einiger Parameter der Polbewegung 2.13. HÖPFNER, J.: Untersuchungen von Amplituden- und Phasenänderungen der CHANDLER-, Jahres- und Halbjahreswelle 2.14. ARNOLD, K.: Einige Betrachtungen zum Auftreten und zur Bedeutung von Lateralinhomogenitäten der Dichte im Erdinneren 2.15. WALZER, U.: Report on mantle convection 2.16. SEIPOLD, U.: Messungen der thermischen Eigenschaften von Gesteinen unter extremen Bedingungen 2.17. ULLMANN, W.: Thermische Zustandsgleichung und GRÜNEISEN-Parameter zur Erforschung des tiefen Erdinneren 2.18. DITTFELD, H.-J.: Experimentelle Aussagen zum dynamischen Effekt des flüssigen Erdkerns 2.19. KOWALLE, G.: Untersuchung zur Dämpfung seismischer Wellen im Erdkern 2.20. DONNER, F. ; GÖTHE, W.; KNOTHE, C.; OELSNER, C.; PORSTENDORFER, G.:Beiträge der Tiefenelektromagnetik, Tiefenseismik und Geothermie zum Geodynamik-Projekt 2.21. HURTIG, E.; STROMEYER, D.: Temperatur-Tiefenverteilung und Viskosität im oberen Erdmantel unter Europa 2.22. OELSNER, C.: Eine Wärmestromanomalie im Gebiet von Freiberg (Sachsen) (in memorian Ferdinand Reich) 2.23. STROMEYER, D.: Studien zur Inversion geothermischer Daten 2.24. MAYER, P.: Einige Ergebnisse magnetisoher Messungen· im Nordatlantik 2.25. MENNING, M.: Tektonische Untersuchungen mit Hilfe der paläomagnetischen Bearbeitung von Bohrkernen 2.26. ROTHER, K.; WIEGANK, F.: Zur Interpretation paläomagnetischer Daten von Europa 2.27. MUNDT, W.: Zum Nachweis lokaler Säkularvariationsanomalien im Gebiet der DDR 2.28. MUNDT, W.; PORSTENDORFER, G.: Mögliche Zusammenhänge zwischen einer elektrischen Leitfähigkeitsanomalie im Erdmantel und anomalen magnetischen Säkularvariationen in Mitteleuropa 2.29. RITTER, E.: Zum Problem geoelektrischer Leitfähigkeitsanomalien und Tiefenbau von Kruste und oberem Mantel 2.30. HARWARDT, H.: Aufbau einer Strainmeteranlage in der Untertagestation Tiefenort 2.31. HARNISCH, G.: Zur Autokorrelationsfunktion der rezenten vertikalen Krustenbewegungen 2.32. THURM, H.; BANKWITZ, P.; HARNISCH, G.: Rezente horizontale Deformationen der Erdkruste im Südostteil der Deutschen Demokratischen Republik 2.33. KAUTZLEBEN, H.: Zur geophysikalischen Interpretation der planetaren Dynamik der Erde 3. Ergänzende Literatur 3.1. Untersuchung zur Geologie und Geophysik von Meeresböden (WG 4) 3.2. Rezente Erdkrustenbewegungen (WG 5) 3.3. Beziehungen zwischen Metamorphose und Tektonik (WG 9) 4. Autorenverzeichnis , Beiträge teilweise in deutscher, teilweise in englischer Sprache

Note: Inhaltsverzeichnis Vorbemerkung Teilnehmerverzeichnis Vorträge 0. Meteorologische Einflüsse auf geodätische Messungen / Bahnert, G. 1.1 Terrestrische Refraktion und vertikale Temperaturverteilung über dem Inlandeis Antarktikas / Helbig, A. 1.2. Refraktionsschwankung und Turbulenz / Meier, S. 1.3. Opyt opredelenija pulsacii pokazatelja prelomlenija, c usredneniem izmerenij vo vremeni / Tikasz, E. 1.4. Fisičeskie osnovy slučajnych izmenenij uglov optičeskoj refrakcii v zemnoj atmosfere / Alekaeev, A. u.a. 1.5. Issledovanie refrakcii optičeskich voln v prizemnom sloe atmosfery / Alekseev, A. u.a. 2.1. Der Refraktionseinfluß auf Visuren bis 250 m Länge / Bahnert, G. 2.2. Trigonometrisches Nivellement im Testnetz der TH Praha / Hauf, M. 2.3. Bestimmung der Refraktion bei dem trigonometrischen Nivellement / Blazek, R. 2.4. Refraktionseinfluß auf trigonometrische Nivellements hoher Präzision / Milev, G. 2.5. Bestimmung der Refraktion bei der dreidimensionalen Triangulation insbesondere im Gebirge / Hradilek, L. 2.6. Neuere Untersuchungen in Refraktionsforschungen in Ungarn / Horvath, K. 2.7. Geodeziko-meteorologičeskij metod opredelenija bokovoj refrakcii / Djankov, I. 2.8. Issledovanija vlijanija fluktuacij sobstvennogo izlučenija lazerov i atmosfery na točnost' dispersionnogo metoda izmerenija refrakcii / Suškov, A. 2.9. Issledovanie vozmožnosti ispolzovanija predvestnika dlja oslablenija vlijanija atmosfery na geodezičeskie izmerenija / Galkin, J., Genike, A. 2.10. Brechungsindexschwankungen und die Interferenzerscheinung im Väisälä-Interferometer / Rauhut, J. 2.11. Zur Brechungsindexbestimmung mittels selbstregistrierender Luftrefraktometer auf der Standardbasis Potsdam / Kühne, K. 2.12. Erfassung des Refraktionseinflusses bei geodätischen Interferenzlängenmessungen mittels der Luftdispersion / Schüler, R. 3.1. Theoretische und experimentelle Untersuchungen zur Ermittlung des vertikalen Tagesganges der bodennahen Refraktion zur Ableitung von Einsatzkriterien für Laserleitstrahlsysteme / Hübner, E. 3.2. Erfahrungen über die erreichbare Fluchtungsgenauigkeit mit Lasergeräten im Gelände / Freitag, P., Zschiesche, K. 3.3. Studium der Vibration und der Refraktion durch den Laser / Tlusty, J. 3.4. Beitrag zum Einfluß des systematischen Anteils der Luftturbulenz auf die Richtungsstabilität eines He-Ne-Laserstrahles in Erdbodennähe / Hübner, E. Empfehlungen , Beiträge zum Teil in deutscher, zum Teil in russischer Sprache , Text zum Teil in kyrillischer Schrift

Note: Contents: Membership of the National Committee on Antarctic Research in the Federal Republic of Germany. - Introduction. - Stations. - I. Record of Activities (past and ongoing), April 81-October 82. - II. Planned Activities, October 82-October 83. - References.

Note: CONTENTS Abstract Preface Summary Introduction Methodology Geologic setting Camp construction and occupation Types of disturbance Degradational processes and the effective area of impact Areal effects of disturbance Topography Groundwater, surface water and drainage Sediment properties and near-surface stratigraphy Surficial processes Depth of thaw Comparison to Fish Creek Discussion and conclusions Literature cited

Note: CONTENTS Abstract Preface List of symbols Introduction Objectives Background Problems in describing the response of snow to an applied stress Methods of determining the dynamic behavior of materials Review of previous studies on snow Experimental measurements on snow Summary of snow experiments Theoretical studies Confirmation of the theory Discussion Applications Recommendations Summary Literature cited Appendix A. Selected data from Wisotski and Snyder (1966) Appendix B. Pressure data from Livingston (1964)

Note: CONTENTS Abstract Preface Introduction Background Development of testing technique Test specimens Tensile testing Compression testing Experimental results Tensile tests Compression tests Discussion Conclusions Suggestions for further work Literature cited Appendix A: Additional information on seed grains Appendix B: Thin-sectioning procedure Appendix C: Displacement transducer calibration

Note: CONTENTS Abstract Preface Nomenclature Conversion of metric units Introduction Review of existing models Accumulation models Ablation models Using existing models for studying mobility Proposed snowpack model for mobility studies Model components Implementation of the model Developing input data Conclusions Literature cited

Note: CONTENTS Abstract Preface Introduction Location of study Study methods Ice thickness Ice-cover composition Surface air temperatures Freeze-up and ice-out characteristics Results and discussion Ice-growth record Freezing-degree-day records Ice-growth predictions Summary and conclusions Literature cited Appendix A: Ice-growth records Appendix B: Measured and computed ice-growth curves

Note: CONTENTS Abstract Preface Metric conversion table Introduction Data base Conversion factor Ground load effects Exposure effects Thermal effects Slope effects Expected value relationship Comparison with existing codes and standards Comparison with relationships proposed in new ANSI standard Summary and conclusions Literature cited Appendix A. Roof snow load case history reports Appendix B. Roofs in the snow load case study data base Appendix C. Ground and roof snow load data Appendix D. Conversion factors from the 1982 ANSI standard

Note: CONTENTS Abstract Preface Nomenclature Introduction Physical diffusion and dispersion in open channel flow Modeling approach Description of the diffusion wave flow routing model Analysis of the numerical model Modified equation and Hirt analyses of diffusion wave model von Neumann analysis of the diffusion wave model Linear case studies Accuracy considerations of the numerical solution Field studies Apalachia Dam tailwater Norris Dam tailwater Conclusions Literature cited

Note: Contents: Plant-environment interactions across multiple scales -- Plant biodiversity and population dynamics -- Assembly of plant communities -- Plant pollination and dispersal -- Plant phenotypic expression in variable environments -- Evolutionary ecology of chemically mediated plant-insect interactions -- Plant-microbe interactions -- Patterns and controls of terrestrial primary production in a changing world -- Ecology of tropical rain forests -- Ecology of temperate forests -- Plants in deserts -- Plants in alpine environmnets -- Plants in arctic environments -- Grassland ecology -- Coastal wetland ecology and challenges for environmental management -- Near-coastal seagrass ecosystem -- Ecology of marine phytoplankton -- Plants in changing environmental conditions of the anthropocene -- Plant influences on atmospheric chemistry -- Biofuel development from cellulosic sources -- Plant ecology and sustainability science

Note: Contents of Part 2 Hecht, K. Gerber, R. Otto: Studies on the drying of paints by means of 14C-labelled compounds K. Wagner, F. Brutschin, I. Ritter, T. Gritsch, H. Zimmermann, H. Borchert: Investigations by the aid of radioisotope methods on the technology of the production of carbon and silicon carbide materials K. Gloe, P. Mühl: Determination of metal extraction process parameters using tracer technique W. Migdał, W. Łada, K. Malec-Czechowska: Studies on liquid-liquid extraction of noble metals using radiotracers L. Petryka, K. Przewłocki: Radiotracer investigations of benefication copper ore in the industrial flotation process Z. Bazaniak, J. Palige: Determination of Cu recovery degree from slags in shaft process by means of radiotracers R. Burek, J .K. Zurawicz: On the optimization of concentration measurements in heterogeneous materials based on β-backscatter measurements B. Heinrich: Analysis of carbon content in crude brown coal by inelastic scattering of neutrons and the method of time correlated associated particles P. Urbańaki, D. Wagner, M. Jankowska, E. Kowalska: Determination of calcium and iron and measurements of ash content in the brown coal H.-W. Thümmel: Some considerations relating to the prediction of the efficiency of radiometric methods for the continuous ash content determination of coal L. Wawrzonek: Monitor of ash content of coal with X-ray source I. Pavlicsek, V. Stenger, A. Veres: Apparatus for gamma activation analysis I. Végvári, I. Juhász: Determination of PbO content of lead-glass samples on the ground of gamma-absorption E. Schöntube, H.-J. Große: Aerosol ionization gas analysis as a monitoring for waste halothane in the atmosphere of operating theatre S. Mothes, P. Popp, G. Oppermann, W.-D. Herberg: Measurement of fluorocarbons with the ECD P. Popp, E. Schöntube, G. Oppermann: The usability of radiation ionization detectors for the determination of N2O concentrations in the air of operating theatres P. Popp, G. Arnold, G. Oppermann: A hydrocarbon-sensitized argon ionization detector for the detection of inorganic compounds R. Szepke, W. Lisieski, J. Harasimczuk: Automatic dust monitor AMIZ G. Vormum: Sealed sources - problems of design, measurement and quality control L. Gąsiorowski: New trends in developments of ratioisotope gauges in Poland G. Brunner: Direct chemical information from special radio tracers as well as from outer X-ray excitation J. Hirling: Experience and future trend in industrial application of nuclear methods in Hungary I. N. Ivanov, O. K. Nikolaenko, Yu. V. Phecktistov, V. L. Chulkin: Use of short-lived nuclides in activation analysis Kl.-P. Rudolph, J. Flachowsky, A. Lange: Trace element determination in semiconducter selenium by neutron activation analysis (NAA) W. Lisieski, J. Mirowicz: Some industrial applications of instruments with neutron sources R. Dybczyński, H. Maleszewaka, S. Sterliński, Z. Szopa, M. Wasek: Some problems in neutron activation determination of gold and silver in ores and concentrates of copper industry L. Jankowski: Cost-benefit aspects of radioisotope application in industry B. Manouchev, T. Boschkova, L. Tsankov, V. Gurev, I. Kojucharov, G. Grozev: On the possibilities of the direct gamma-spectremetry in natural waters P. Morgenstern, D. Müller, W. Riedel: A parallel grid proportional scintillation counter for the X-ray region from 3 to 20 keV with regard to high count rates N. A. Anders, V. S. Isaev, V. I. Filatov, B. E. Kolesnikov, D. Müller, P. Morgenstern, W. Riedel, V. P. Varvaritsa: X-ray fluroescence analyzer of light elements with proportional scintillation counter D. Müller, P. Morgenstern, W. Riedel, W. Warwariza, B. E. Kolesnikow, N. A. Anders, W. J. Filatov: General considerations concerning the use of the X-ray analyzer "RALE" in industry

Note: Contents of Part 3 P. Popp, J. Leonhardt: Characterization of coulometric and hypercoulometric ECD mode of operation D. Hinneburg, H.-J. Grosse, J. Leonhardt, P. Popp: Calculation of current-voltage characteristics of electron-capture detectors A.G. Rozno, V.V. Gromov: Study of volume electric charge in radioactive dielectrics by the method of "acoustic sounding" Iv. N. Pandev, M.G. Christova, St.D. Stefanov, N.V. Gentchev, St.T. Bakardjiev, D.T. Genov, Ch.D. Christov: Portable gamma-irradiator - modified model P. Hargittai, V. Stenger: Planning of dose-rate distribution of radiation fields by computer M. Remer: DOSKMF2 - A contribution to the computer-aided design of dose rate distributions A. Heger, H. Dorschner, W. Schumann, D. Pleul: Characterization of the radiation field and control of the optimal electron beam accelerator operation for industrial processes V. Prenerov, K. Shivarov, P. Ivanov: Programme for radiation protection by using portable defectoscopes in industrial building T. Geßner, K. Irmer: Nuclear radiation detectors using high resistivity neutron transmutation doped silicon H.-G. Könnecke, D. Luther: The influence of airing systems on the residence time in biological clarification plants J. Dermietzel, C. Wienhold, H. Grundmann, A. Staschok, J. Koch, E. Bordes: Tracer studies on carbon monoxide and carbon dioxide formation in liquid phase oxidation of p-xylene W. Smułek: Use of technical mixtures of carboxylic acids to the extraction of silver H. Förster: Determination of oxide film thickness on aluminium using 14-MeV neutron activation and BET method H. Jaskólska, L. Waliś, C. Janusz: Investigations of the monocrystallization process of neodymium doped YAG using radiotracers H. Wagler: Substoichiometric determination of Pd-II-traces with dithizone and problems of determination P. Tábor, L. Molnár, D. Nagymihá!yi: Radioisotope gauge for automatic control of cottonwool package H.-W. Thummel, G. Körner, D. Fritzsche: Compensation for thickness variations in determining the bulk material composition on conveyor belts using combined scatter-transmission and thickness measuring methods D. Fritzsche, W. Dolak: Radiometric determination of ash content of raw lignites M. Braune: A simplified mathematical model for scattered transmission of X-rays in raw brown coal P. S. Kamenov, E. I. Vapirev, S. I. Ormandjiev: A new type of nuclear weighing device for transporter belts W. Smulek, M. Borkowski: Separation of reduced molybdenum from fission products. The Mo - HN03 - HDEHP system J. Komosiński, M. Radwan: Selected problems of radioisotope technique for wear investigation of precise elements Dr. A. Várkonyi: The thin layer activation for industry G. Hartmann, P. Kulicke: Wear testing in power stations J. Kraś, Z. Banasik: The radioisotopes in wear investigation of combustion engines H.-D. Grohmann: Short-time measurements of wear on surface activated rails G.M. Ter-Akopian, E.A. Sokol, Fam Ngok Chyong, M.P. Ivanov, L.P. Chelnokov, V.I. Smirnov, V.A. Gorshkov: Neutron multiplicity detector for the study of rare nuclear decay events L. Gąsiorowski, P. Mroziński, K. Sobkowicz, F. Zrudelny: Implementation of Intel 8080 - based microcomputer system in the radioisotope measurements control instrumentation W. Birkholz, M. Steinert: Evaluation of autoradiograms using a microcomputer F. Myšák, M. Krejči, J. Hakl, E. Smrkovský: Study of boron diffusion in high temperature Ni-base alloys by means of solid state track detectors W. Birkholz, H.-Ch. Treutler, K. Freyer, M. Geisler, J. Dubnack: Autoradiography of gallium in silicon H.C. Treutler, K. Freyer: On quantitative autoradiography of semiconductor basic material A.S. Shtan': Radiation evaluation techniques and facilities used for quality assurance of fuel elements and fuel assemblies for nuclear power plants D. Babić, A. Šafranj, V. Marković: Radiation degradation of poly-propylene-molecular weight and melt viscosity change A. Ciszek: Modern irradiation processes equipment-accelerators and their applications G. Kummer: Identification of signals by means of the decision theory N.S. Batchvarov, I.D. Vankov, L.P. Dimitrov, Ch.D. Shukov, P.A. Pavlov: Betareflektometer SR-77

Note: Analysing qualitative data-but how? -- The building blocks of systematic qualitative text analysis -- Basic concepts and the process of qualitative text analysis -- Three basic methods of qualitative twxt analysis -- Qualitative text analysis using computer assistance -- Quality standards, research report, and documentation -- Concluding remarks

Note: CONTENTS Abstract Preface Introduction Forest systems design Pretreatment Distribution systems Public health considerations Buffer zone requirements Toxic effects Public access Hydraulic loading Nutrient uptake and loading Introduction Nitrogen Phosphorus Trace metals Design considerations Hydraulic loading rates Nitrogen loading rates Forest management options Reforestation Existing forest ecosystems Short term rotation plantations Potential long term effects on forest ecosystems Longevity of forest systems Consequences of overloading Soil chemical, physical and hydrologic properties Productivity Summary Literature cited

Note: CONTENTS Abstract Preface Introduction Objectives Background Approach Influencing factors Field factors Laboratory Laboratory trafficking tests Force measurement and coefficient of friction Test tire slip Surface friction gauge Test procedure British portable tester Experimental results Conclusions Recommendations Literature cited Appendix A. Test pavements Appendix B. Pennsylvania State University field study Appendix C. Rochester Institute of Technology field study

Note: CONTENTS Abstract Preface Introduction Refraction experiments Procedure Equipment Results P waves Low velocity zone SH waves Surface wave experiments Summary and discussion Literature cited Appendix A: P wave refraction data Appendix B: SH wave refraction data. Appendix C: Surface wave dispersion calculations

Note: CONTENTS Abstract Preface Introduction Model description and application Results and discussion Wind and current fields Standard simulation Thermodynamic simulation Zero ice strength Zero ice import Zero currents Modified currents Zero winds Dynamics simulation Summary and concluding remarks Literature cite

Note: CONTENTS Abstract Preface Introduction Previous investigations Approach Shoreline conditions Bank changes Bank recession before winter navigation St. Marys River Bank changes Bank recession before winter navigation St. Clair River Bank changes Bank recession before winter navigation Detroit River Bank changes Bank recession before winter navigation St. Lawrence River Bank changes Historical bank recession Summary and conclusions Literature cited Appendix A: St. Marys River Appendix B: St. Clair River Appendix C: Detroit River Appendix D: St. Lawrence River

Note: CONTENTS Abstract Preface Introduction Theoretical development of dielectric relaxation due to charged dislocations Numerical calculations for distributed segment length Discussion Conclusions Literature cited Appendix A. Mosotti type catastrophe by charged dislocation processes