ISSN:
1573-4889
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract The initial oxide was CoO which formed very rapidly by outward cation diffusion. A chromium-enriched substrate layer subsequently reacted via internal oxidation to form a continuous film of Cr2O3. The formation of CoCr2O4 occurred rapidly by the reaction of CoO and Cr2O3. The presence of CoCr2O4 spinel in the oxide scale was found to offer less oxidation resistance than a layer of Cr2O3 in Co-20Cr. The large mass of CoO that existed, as well as the much more rapid rate of spinel formation compared to the rate of Cr2O3 growth, resulted in the Cr2O3 being used up faster than new Cr2O3 could form. This behavior was opposite that observed in Ni-Cr alloys. Manganese additions slightly reduced the oxidation rate as well as the solid-state growth rate of spinel. However, the spinel still formed faster than new Cr2O3, and hence the protective layer was used up. Silicon additions reduced the oxidation rate, but the layers were highly susceptible to spalling upon cooling as well as during isothermal oxidation. The scales contained both spinel and Co2SiO4. The ortho-silicate was present as isolated particles and did not form a continuous protective film per se. The reduced oxidation rate was associated with a thin inner film of Cr2O3.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF00603486
Permalink