ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
On the corrosion testing of weldments of high alloyed CrNiMo-stainless steels and NiCrMo-alloysWeluments of high-alloyed CrNiMo stainless steels and Nicro alloys can he more susceptible to localized corrosion than the solution annealed basic material owing to segregations and precipitations in the heat affected zone, the high temperature zone and/or in the weld. To investigate these differences the FeCl3-test (10% FeCl3 · 6aq), the test “green death” (11.5% H2SO4, 1.2% HCl, 1% CuCl2, 1% FeCl3) as well as chronopotentiostatic tests in artificial sea water or in 3% NaCl-solution are used. In particular for testing the highest alloyed materials a CaCl2 test was developed (4.5M CaCl2, chronopotentiostatic test in duration of 8 to 10 hours at + 200 mV (SCE)), which can be carried out to a temperature of 115°C at atmospheric pressure. The aggressivity increases in the range FeCl3-test, “green death”-test, CaCl2-test. Matching and graduated over-alloyed weldments (TIG, heat input of 7 and 15.5 kJ/cm) of materials 1.4529, 1.4562, 2.4856, 2.4819 (german materials No.) are comparingly examined in various tests, of materials 1.4406, 1.4539, 1.4439 and 1.4563 (german materials No.) only matching weldments in the FeCl3-test.In strongly oxidizing media only a highly over-alloyed performed weldment (filler material 2.4607, german material No.) produces the best corrosion behaviour, measured as the critical temperatures of localized corrosion.Measurements of critical current densities of passivation can be used for investigations of corrosion behaviour of weldments, too. Critical current densities of passivation are showing a tendency to inverse proportion to the critical temperatures of localized corrosion.Suitable electrolytes are among others 0.2M H2SO4 + 1M NaCl + 10-3% KSCN, N2-bubbled, 25 to 60°C and xM H2SO4 + 4M NaCl + 10-3% KSCN (x = 0.05 to 1), 25°C, in contact with air.An influence of heat input at the welding is indicated in the test of localized corrosion, but it is only small. It is sometimes more clearly shown at measurements of passivation.
Notes:
Schweißverbindungen (SV) von hochlegierten CrNiMo-Stählen und NiCrMo-Legierungen können durch Seigerungen und Ausscheidungen in der Wärmeeinfluß, Hochtemperaturzone und/oder im Schweißgut gegenüber dem lösungsgeglühten Grundwerkstoff lokalkorrosionsanfälliger sein. Zur Ermittlung dieser Unterschiede dienen der FeCl3-Test (10% FeCl3. 6aq), der “Grüne Tod”-Test (11,5% H2SO4, 1,2% HCl, 1% CuCl2, 1% FeCl3) sowie potentiostatische Halteversuche in künstlichem Meerwasser oder in 3% NaCl-Lösung. Speziell für die Prüfung höchstlegierter Werkstoffe wurde ein CaCl2-Test entwickelt (4,5M CaCl2, 8-10 h potentiostatischer Halteversuch bei + 200 mV (GKE)), der bis 115°C bei Atmosphärendruck betrieben werden kann.In der Reihenfolge FeCl3-Test, “Grüner Tod”-Test, CaCl2. Test steigt die Aggressivität.Artgleiche und gestuft überlegierte Schweißverbindungen (WIG, Streckenenergie 7 und 15,5 kJ/cm) von den Werkstoffen 1.4529, 1.4562, 2.4856, 2.4819 werden in verschiedenen Tests und von den Werkstoffen 1.4406, 1.4539, 1.4439, 1.4563 nur artgleiche SV im FeCl3-Test vergleichend untersucht. In stark sauren Medien ergibt erst eine hoch überlegiert ausgeführte SV (Schweißzusatz: 2.4607) das beste Korrosionsverhalten, gemessen an den kritischen Lokalkorrosionstemperaturen.Messungen von Passivierungsstromdichten können auch für Korrosionsuntersuchungen von Schweißverbindungen eingesetzt werden. Passivierungsstromdichten verhalten sich tendenziell umgekehrt proportional zu kritischen Lokalkorrosionstemperaturen. Geeignete Elektrolyte sind u.a. 0,2M H2SO4 + 1M NaCl + 10-3% KSCN, N2-begast, 25-60°C und xM H2SO4 + 4M NaCl + 10-3% KSCN (x = 0,05-1), 25°C, Luftkontakt.Im Lokalkorrosionstest ist ein Einfluß der Streckenenergie angedeutet aber nur gering, bei Passivierungsmessungen mitunter deutlicher ausgeprägt.
Additional Material:
10 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19970480807
Permalink